June 2019 - dovecot - dovecot.org

Supporting RFC 5466 (IMAP4 Extension for Named Searches (Filters))
by Jesus Cea 06 Dec '19

06 Dec '19

I wonder if Dovecot supports RFC 5466 (IMAP4 Extension for Named Searches (Filters)) or if there is any plan about it. -- Jesús Cea Avión _/_/ _/_/_/ _/_/_/ jcea(a)jcea.es - http://www.jcea.es/ _/_/ _/_/ _/_/ _/_/ _/_/ Twitter: @jcea _/_/ _/_/ _/_/_/_/_/ jabber / xmpp:jcea@jabber.org _/_/ _/_/ _/_/ _/_/ _/_/ "Things are not so easy" _/_/ _/_/ _/_/ _/_/ _/_/ _/_/ "My name is Dump, Core Dump" _/_/_/ _/_/_/ _/_/ _/_/ "El amor es poner tu felicidad en la felicidad de otro" - Leibniz

4 6

dovecot sieve duplicates detection
by André Rodier 04 Dec '19

04 Dec '19

Hello, I have tested the sieve duplicate script with success so far, but I have a question. I would like to know if the "duplicate" sieve flag in Dovecot is global to all folders, or specific to one folder only. For instance, if I copy an email from one folder to another, and I have a discard action on duplicate email, is this action will be applied (in this case, discard) or not. If the duplicate is global to all folders, is there a way to restrict the search in one folder only. Thanks for your help. André

3 10

Migration
by Hans Brage 01 Oct '19

01 Oct '19

Hi! I'm currently running an small imap-server on Dovecot 2.2.4 but will retire that server. I've set up an new server with Dovecot 2.3.4 and will migrate the mailboxes (maildir-format) from the old to the new server. I'm planning to restructure the accounts a bit when migrating so I need to move them one by one. Its only a few so thats not a big issue. Both servers are using virtual accounts (users file). I've understood that best method for migration is to run doveadm backup -R from the new server. But I really cant figure out what other parameters or settings that I need to perform that task and if it should be run as user vmail or root. Would be greatful for any tips, hints, links or similiar. Regards, Hans

6 9

Best way to move mail from one server to another
by James Brown 01 Oct '19

01 Oct '19

I’d like to migrate to a new server. I only need to transfer the mail store, have already done the users. I’ve seen different recommendations: IMAP-Sync Rsync Doveadmin backup and dsync What are the pros and cons of each? What would be best for me? I’m thinking that Doveadmin backup is the way to go. Both old and new servers are on same network. New server is running Dovecot 2.3.2.1, old server is 2.2.32. macOS X. Does anyone have any advice or examples? Thanks, James.

13 29

pigeonhole/lda accessing -m folder
by matthias lay 12 Sep '19

12 Sep '19

Hi all, anybody knows, if there is a way to acces the folder from a call like this deovecot-lda -m destfolder from within a sieve script? thx in advance matze

5 9

Case sensitive problem for vacation with dovecot lmtp pigeonhole
by kadafax＠gmail.com 11 Sep '19

11 Sep '19

Hi list, This issue was raised here by John Fawcett on 12/02/19 but got no response. So, as I'm facing the same issue, I would like to try again: When using the vacation sieve extension, if I send an email to user.name(a)mydomain.com it will work, but not to User.Name(a)mydomain.com. Is there a way to make the user part case insensitive so that the vacation auto-reply is fired whatever the way user part is written ? doveconf -n output: # 2.3.5.1 (7ec6d0ade): /usr/local/etc/dovecot/dovecot.conf # Pigeonhole version 0.5.5 (2483b085) # OS: Linux 3.10.0-957.5.1.el7.x86_64 x86_64 CentOS Linux release 7.6.1810 (Core) ext4 # Hostname: myserver.mydomain.com auth_master_user_separator = * auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@* auth_verbose = yes debug_log_path = /var/log/dovecot-debug.log default_client_limit = 10640 default_process_limit = 2128 default_vsz_limit = 0 hostname = mydomain.com info_log_path = /var/log/dovecot.log lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes listen = * log_path = /var/log/dovecot-error.log login_greeting = Welcome mail_gid = vmail mail_location = maildir:/var/vmail/%Ln mail_plugins = quota fts fts_lucene mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext namespace inbox { inbox = yes location = maildir:/var/vmail/%Ln mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Sent { auto = subscribe special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { auto = subscribe special_use = \Trash } prefix = type = private } passdb { args = /usr/local/etc/dovecot/deny-users deny = yes driver = passwd-file } passdb { args = /usr/local/etc/dovecot/master-users driver = passwd-file master = yes pass = yes } passdb { args = /usr/local/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { fts = lucene fts_autoindex = yes fts_lucene = whitespace_chars=@. quota = maildir:User quota quota_rule = *:storage=30GB quota_rule2 = Trash:storage=+200M quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u sieve = /var/sieve-scripts/%Ln.sieve sieve_dir = /var/vmail/%Ln/home/sieve } postmaster_address = postmaster(a)mydomain.com protocols = imap pop3 lmtp sieve sieve quota_full_tempfail = yes service auth-worker { user = $default_internal_user } service auth { unix_listener /var/spool/postfix/private/auth { mode = 0777 user = vmail } } service imap-login { inet_listener imaps { port = 993 ssl = yes } process_min_avail = 10 } service imap { process_limit = 2128 } service lmtp { executable = lmtp -L process_min_avail = 15 unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0600 user = postfix } } service managesieve-login { inet_listener sieve { port = 4190 } } service pop3-login { inet_listener pop3s { port = 995 ssl = yes } } service quota-warning { executable = script /usr/local/bin/quota-warning.sh user = nobody } ssl_cert = </etc/letsencrypt/live/myserver.mydomain.com/fullchain.pem ssl_dh = # hidden, use -P to show it ssl_key = # hidden, use -P to show it userdb { args = /usr/local/etc/dovecot/dovecot-ldap-userdb.conf.ext driver = ldap override_fields = uid=vmail gid=vmail home=/var/vmail/%Ln/home } protocol imap { mail_max_userip_connections = 30 mail_plugins = quota fts fts_lucene imap_quota } protocol lmtp { info_log_path = /var/log/dovecot-lmtp.log log_path = /var/log/dovecot-lmtp-errors.log mail_plugins = quota fts fts_lucene sieve } protocol sieve { mail_max_userip_connections = 20 }

2 2

Re: Message delivered twice caused by an LMTP error "Got unexpected reply" during upgrade to 2.3
by Gabriele Nencioni 02 Sep '19

02 Sep '19

>>> On 08/09/2018 09:12 AM, Stephan Bosch wrote >>>>>> Can you make a pcap log of the LMTP communication between the two >>>>>> Dovecot hosts? That may give me a clue on which side of the >>>>>> communication is causing the issue. >>>>> Yes sure, where I can send it? >>>>> Here on list or at your address? >>>> >>>> Just send it to me. On 08/16/2018 10:21 AM, Stephan Bosch wrote: > Op 16/08/2018 om 09:46 schreef Gabriele Nencioni: >> On 08/15/2018 06:39 PM, Stephan Bosch wrote: >>> Op 15-8-2018 om 17:19 schreef Stephan Bosch: >>>> >>>> Op 13-8-2018 om 15:50 schreef Gabriele Nencioni: >>>>> So the scenario seems to be: >>>>> the error occurs between old directors and new backends >>>>> and between the new backends and the smtp submission_host (for >>>>> redirection) >>>>> and using the pipeline capability and attaching a file >>>>> >>>>> Let me know if you need more info >>>> In this case it is possible to obtain a debug log by enabling >>>> mail_debug=yes. Can you obtain a full debug log for such a failing >>>> submission session? >> Ok! It is attached. > > That is just weird. Dovecot reports that it cannot fully send the last > bits of the message and right thereafter the reply is received, which > Dovecot then interprets as out-of-sequence. The PCAP files tell me the > final CRLF.CRLF is actually sent to the other side, but somehow Dovecot > thinks it couldn't do that yet. > > Is this problem occurring for any and all SMTP client interactions, or > just every once in a while? Unfortunately it occurs just every once in a while and it is weird because at the second attempt the message is successful delivered or redirected. >>> Also, I don't see anything weird in the PCAP files: the command-reply >>> sequence is OK. This means that this is likely a bug in the current >>> Dovecot version. Those debug logs should tell me more. >> Ok! Which version of dovecot do you suggest to install? >> On debian current stable (stretch) repository there is the version >> number 2.2.27, have we to install it? > > If you're facing big trouble it is usually best to revert to the > previous version that worked I guess. Ok I'm agree! So, about you, which version can I try to install the 2.2.27 or the previous release of the 2.3 version such as v2.3.2 2018-06-29 or v2.3.1 2018-02-29? Regards, -- Gabriele Nencioni System Administrator eml gabriele.nencioni(a)register.it

2 6

flags not synced correctly with dovecot sync (dsync)
by Dan Christensen 31 Aug '19

31 Aug '19

I'm running dovecot 2.3.4.1 from https://repo.dovecot.org/ on Ubuntu 18.04 on three machines that I'll call server, laptop1 and laptop2. Both laptop1 and laptop2 run dovecot sync against server to keep local copies of my imap folders. Even when I initially had only two machines, laptop1 and server, I occasionally noticed that flags were lost, usually custom flags used by Gnus, but I couldn't reliably reproduce the problem. Now that I have two laptops syncing against the server, the problem has gotten worse and I figured out a way to reproduce it: - on server: create new IMAP folder test, and put two read messages in it - on laptop1: doveadm sync -u user -l 10 -m test -f user@server - on laptop2: doveadm sync -u user -l 10 -m test -f user@server At this point, all three machines show the two messages M1 and M2 as being read. - on laptop1: mark message M1 unread - on laptop2: mark message M2 unread - on laptop1: doveadm sync -u user -l 10 -m test -f user@server Both laptop1 and server have M1 unread, M2 read, as expected. - on laptop2: doveadm sync -u user -l 10 -m test -f user@server Now laptop2 and server have M1 *read*, M2 unread. - on laptop1: doveadm sync -u user -l 10 -m test -f user@server Now laptop1 and the server have both M1 and M2 *read*. - on laptop2: doveadm sync -u user -l 10 -m test -f user@server Now laptop2 has both read as well. The two lines that say "*read*" are wrong in my opinion. dsync propagated a read mark to an unread message, even though that message was marked unread more recently than it was marked read. I usually use stateful sync, and get many related problems. I just did a test in which M1 and M2 started out read, and I started with empty files named dstate.test on laptop1 and laptop2. Then I did the above procedure, using the command doveadm sync -u user -l 10 -m test -s "`cat dstate.test`" user@server > dstate.test At the end, laptop2 and server had both messages unread (which is good), but laptop1 had only M1 unread, and repeated runs of the sync command did not correct this. So the stateful sync failed to detect a change. Are these bugs in dovecot? Is there more information that I can provide? The output of doveconf -n on one machine is below, and the others are almost identical. Thanks for any help! Dan # 2.3.4.1 (3c0b8769e): /etc/dovecot/dovecot.conf # OS: Linux 4.15.0-45-generic x86_64 Ubuntu 18.04.1 LTS # Hostname: laptop2 auth_mechanisms = plain login listen = 127.0.0.1 mail_index_log2_max_age = 10 days mail_index_log_rotate_min_age = 1 days mail_index_log_rotate_min_size = 300 k mail_location = maildir:~/Maildir namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = scheme=CRYPT username_format=%u /etc/dovecot/users driver = passwd-file } protocols = imap service imap-login { inet_listener imap { address = * port = 143 } inet_listener imaps { address = * port = 943 ssl = yes } } service imap { process_limit = 25 } ssl_cert = </etc/dovecot/private/dovecot.pem ssl_client_ca_dir = /etc/ssl/certs ssl_dh = # hidden, use -P to show it ssl_key = # hidden, use -P to show it userdb { args = username_format=%u /etc/dovecot/users driver = passwd-file } protocol lda { postmaster_address = [elided] } protocol imap { mail_max_userip_connections = 20 }

3 8

Emails not visible after renaming folders
by Aleksandr 14 Aug '19

14 Aug '19

Hello, I have strange problem with "losing" emails after rename mail folder(s) (via imap client: thunderbird, roundcude, etc..) How to reproduce: 1. Create some folder name, like TEST 2. Create sub-folder under TEST (like SUBTEST) Structure: TEST |--SUBTEST # doveadm mailbox list -u postmaster@testmailbox Spam Trash Sent Drafts INBOX TEST TEST/SUBTEST 3. Move (or copy) mails from INBOX to SUBTEST (all looks fine, and mails visible under SUBTEST) 4. Rename TEST folder to any new name, NEWTEST Let`s try to view mails in mail client in NEWTEST-SUBTEST, folder have no emails :( mailsrv# doveadm -f table mailbox status -u postmaster@testmailbox "messages vsize" NEWTEST* mailbox messages vsize NEWTEST 0 0 NEWTEST/SUBTEST 0 0 If doveadm force-resync postmaster@testmailbox, mails will be visible in INBOX mailsrv# doveadm -f table mailbox status -u postmaster@testmailbox "messages vsize" INBOX* mailbox messages vsize INBOX 2 28 Dovecot installation: CentOS x86_64 Linux 7.5.1804 Storage: HDD Local Partition - XFS filesystem / multi-dbox (mdbox) as mail_storage (this problem is not reproduced with the settings as Maildir storage !) somthing wrong with mapping indices. ---- [start] ---- # dovecot -n # 2.2.36 (1f10bfa63): /etc/dovecot/dovecot.conf # Pigeonhole version 0.4.21 (92477967) # OS: Linux 3.10.0-862.2.3.el7.x86_64 x86_64 CentOS Linux release 7.5.1804 (Core) # Hostname: xxxx auth_mechanisms = plain login digest-md5 cram-md5 base_dir = /var/run/dovecot/ default_client_limit = 20000 default_login_user = dovecot default_process_limit = 10000 dict { quota = redis:host=127.0.0.1:prefix=user/:timeout_msecs=1000 } disable_plaintext_auth = no first_valid_gid = 90 first_valid_uid = 90 imapc_features = rfc822.size fetch-headers imapc_host = xxxx imapc_user = %u lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes login_greeting = xxxx. login_log_format_elements = user=<%u> method=%m rip=%r lip=%l %c login_trusted_networks = 10.0.1.0/24 mail_access_groups = mail mail_debug = yes mail_fsync = never mail_gid = 97 mail_location = mdbox:~/mail/mailboxes:FULLDIRNAME=mBoX-MeSsAgEs:INDEX=~/mail/index:CONTROL=~/mail/control:INBOX=~/mail/mailboxes/inbox mail_log_prefix = "%{session} %Us(%u): " mail_max_lock_timeout = 30 secs mail_plugins = quota zlib mail_prefetch_count = 20 mail_privileged_group = mail mail_uid = 97 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables enotify environment mailbox date index ihave duplicate mime foreverypart extracttext vacation-seconds editheader mbox_lock_timeout = 30 secs mbox_very_dirty_syncs = yes mbox_write_locks = fcntl namespace inbox { inbox = yes list = yes location = mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Sent { auto = subscribe special_use = \Sent } mailbox Spam { auto = subscribe } mailbox Trash { auto = subscribe special_use = \Trash } prefix = separator = / type = private } passdb { args = /etc/dovecot/dovecot-ldap.conf driver = ldap } plugin { cgroup_basedir = /usr/sys/cgroup hostingAccount = default quota = dict:User quota::proxy::quota quota_grace = 0%% quota_over_flag_value = TRUE quota_over_script = account-quota mismatch %u quota_rule = *:storage=4T quota_warning = storage=101%% account-quota block %u quota_warning1 = -storage=100%% account-quota unblock %u sieve = file:~/sieve;active=~/.dovecot.sieve sieve_before = /home/sieve/%d/ sieve_extensions = +editheader +vacation-seconds -body sieve_max_redirects = 200 sieve_vacation_min_period = 1s trash_folder = Trash zlib_save = lz4 zlib_save_level = 6 } pop3_delete_type = expunge protocols = imap pop3 sieve service account-quota { executable = script /usr/local/scripts/account-quota unix_listener account-quota { mode = 0666 user = dovecot } user = dovecot } service anvil { chroot = /var/empty client_limit = 0 drop_priv_before_exec = no executable = anvil extra_groups = group = $default_internal_user idle_kill = 4294967295 secs privileged_group = process_limit = 1 process_min_avail = 1 protocol = service_count = 0 type = anvil unix_listener anvil-auth-penalty { group = $default_internal_user mode = 0660 user = dovecot } unix_listener anvil { group = $default_internal_user mode = 0660 user = dovecot } user = $default_internal_user vsz_limit = 18446744073709551615 B } service auth-worker { chroot = /var/empty user = $default_internal_user } service auth { chroot = /var/empty executable = /usr/libexec/dovecot/auth unix_listener auth-client { mode = 0660 } unix_listener auth-master { mode = 0666 } unix_listener auth-userdb { mode = 0777 } user = $default_internal_user } service dict { executable = /usr/libexec/dovecot/dict unix_listener dict { mode = 0600 user = $default_internal_user } } service imap-login { executable = /usr/libexec/dovecot/imap-login inet_listener imap { address = xxxxxxx port = 143 } process_limit = 10000 process_min_avail = 1 service_count = 0 user = dovecot } service imap { executable = /usr/libexec/dovecot/imap process_limit = 18000 process_min_avail = 1 service_count = 0 vsz_limit = 256 M } service lmtp { process_limit = 10 } service pop3-login { executable = /usr/libexec/dovecot/pop3-login inet_listener pop3 { address = xxxxxx port = 110 } process_limit = 1000 process_min_avail = 1 service_count = 0 user = dovecot vsz_limit = 256 M } service pop3 { executable = /usr/libexec/dovecot/pop3 process_limit = 1000 process_min_avail = 1 service_count = 0 } service send-warning { executable = script /usr/local/scripts/send-warning unix_listener send-warning { mode = 0666 user = dovecot } user = dovecot } shutdown_clients = no ssl_cert = </etc/dovecot/xxxx.crt ssl_key = # hidden, use -P to show it userdb { args = /etc/dovecot/dovecot-ldap.conf driver = ldap } verbose_proctitle = yes protocol lda { mail_plugins = sieve quota cgroups zlib } protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep mail_max_userip_connections = 50 mail_plugins = quota imap_quota mail_log notify cgroups zlib } protocol pop3 { mail_max_userip_connections = 20 mail_plugins = quota cgroups zlib pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_enable_last = no pop3_no_flag_updates = yes pop3_uidl_format = %08Xu%08Xv } ---- [end] ---- Regards, Aleksandr.

3 4

LastLogin update
by Jorge Bastos 12 Aug '19

12 Aug '19

Howdy, I'd like an adive on what to use. I have sql users, and i want to have the lastlogin of them, what is the native option for this: * Using last_login plugin which will give me the last login? * Use postlogin for imap and pop3n which will give me besides lastlogin the IP and protocol? Thanks in advanced,

8 13