December 2022 - dovecot

Question about line length limit in lmtp.
by Kamil Jońca 22 Apr '24

22 Apr '24

I have postfix + dovecot server. Mail for local users are saved by dovecot lmtp. Recently I got some messages from postfix: --8<---------------cut here---------------start------------->8--- 4NQ07L4h4LztXXr: breaking line > 998 bytes with <CR><LF>SPAC --8<---------------cut here---------------end--------------->8--- This is because postfix has configured with default value lmtp_line_length_limit (990). I can turn off this limit (set to 0) but I am curious if dovecot lmtp will accept so lengthty lines? Does dovecot lmtp has any line limits? KJ -- http://stopstopnop.pl/stop_stopnop.pl_o_nas.html

4 6

Bug report: invalid \HasNoChildren in response when asterisk is used in the name
by Merijn Schering 18 Apr '24

18 Apr '24

Hi, I'm using dovecot 2.3.4.1 (f79e8e7e4). I have created a folder called "Test with *". Now when I do a command: A3 LIST "" "%" RETURN (CHILDREN STATUS (MESSAGES UNSEEN)) It responds: * STATUS Test with * ( MESSAGES 0 UNSEEN 0 ) * LIST ( \HasNoChildren \UnMarked ) / Spam But it actually has children! This only happens when I use a * character in the name. I hope you can fix this some day. Thanks! Best regards, Merijn Schering Intermesh https://www.group-office.com https://twitter.com/GroupOffice

2 4

doveadm sync - I/O has stalled
by songliny 09 Apr '24

09 Apr '24

Hi All, We are using dovecot 2.3.19.1 We created a account with more than 1000 mail folders in Maildir format to reproduce the issue. After weeks of testing, we have found a logic that may cause dsync to encounter the error - no activity for 900 seconds.... The function, dsync_ibc_stream_input, is the callback function after some data are ready for be read. This is part of what it does. o_stream_cork(ibc->output); ibc->ibc.io_callback(ibc->ibc.io_context); o_stream_uncork(ibc->output); Normally, ibc->ibc.io_callback(ibc->ibc.io_context) reads some data and then processes it. But when dsync connects over tcps, it uses function implementations in lib-ssl-iostream to send and receive data. And this simplified call stack would result in some data are read when calling o_stream_uncork o_stream_uncork => o_stream_flush => o_stream_ssl_flush_buffer => openssl_iostream_bio_sync => openssl_iostream_bio_input If some data arrive after ibc->ibc.io_callback(ibc->ibc.io_context) and before o_stre am_uncork, o_stream_uncork would read the data and then return. After o_stream_uncork returns, dsync then waits for new data to be read or written. But because the data had been read in o_stream_uncork, and there may be no new data to be read, dsync may then wait until timeout is met. It may happen, but it is hard to reproduce. If you also encounter this situation, you may try to use dsync over tcp connection. It does not read data when calling o_stream_uncork. As a result, it may not stuck. Back to the error itself, Maybe openssl-stream should not read data when doing uncork(flush)? Song-Lin Yang

2 4

[Dovecot] doveadm delete folders ?
by Robert Schetterer 19 Feb '24

19 Feb '24

Hi , is there a feature like doveadm expunge savedbefore ... for imap folder delete ? -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

5 10

Recommended changes for delivery from Exim
by jgh＠exim.org 05 Feb '24

05 Feb '24

Hi, Security changes to Exim have invalidated certain suggested configurations in the Dovecot wiki. As I do not have a Dovecot installation to test, I am not going to write any updates there. It would be good if someone would test these suggestions and then make updates as needed. 1) The use of $local_part and $domain in commands run by the "pipe" transport will be disallowed in the upcoming Exim release. These are currently noted as optional, with the "-m" flag to dovecot-lda. They should be replaced with validated (untainted) versions, commonly $local_part_data and $domain_data, developed via one of the several de-taint methods documented for Exim. The same applies to $original_local_part and $original_domain. 2) The use of $sender_address will likewise be disallowed. This and the "-f" flag can be dropped from the dovecot-lda command line, and the specification of a null "message_prefix" option removed. The defaults for a pipe transport will then prefix the message with a suitable Mbox "From " header line, which dovecot-lda is documented to extract the sender from. Both of these suggestions are back-compatible to the current 4.95 release of Exim, and will be required with the 4.96 release. -- Cheers, Jeremy Refs: - https://wiki.dovecot.org/LDA/Exim - https://doc.dovecot.org/configuration_manual/protocols/lda/

3 3

JMAP support?
by Mark Constable 31 Jan '24

31 Jan '24

On Fri Jan 25 2019 Aki wrote: > There is no JMAP support in any dovecot version yet. Two years on so what is the status of JMAP support in Dovecot now?

7 10

bug report: lmtp fails on root-squashed NFS filesystem
by Anne Bennett 09 Oct '23

09 Oct '23

Hi, all. I'm trying to set up Postfix with dovecot LTMP delivery on a host where the user files (/var/spool/mail as well as home directories) are on NFS filesystems, which are exported root-squashed to the mail server. I definitely don't want to give the mail server root permissions on the user files. LMTP delivery fails with this logged message (e.g.): Nov 16 17:51:36 lust dovecot: lmtp(anne)<16830><mkkzEPg1lGG+QQAAs/mAJw>: msgid=<202111162229.1AGMTfAO024765(a)vindemiatrix.encs.concordia.ca>: save failed to INBOX: Read-only mbox I found this posting where someone else had a similar problem and traced it in some detail back in 2019: https://dovecot.org/list/dovecot/2019-February/114611.html but apparently no one answered the fellow. In order to check that this is indeed the same problem, I temporarily changed the INBOX definition to make it write into /var/tmp/ (on a local filesystem), and delivery worked. I then temporarily changed the INBOX definition to make it write into an NFS filesystem with root NOT squashed, and again it worked (after I chmodded the directory to 1777 to allow any user to create a file). I believe that the person who wrote the above posting is correct: at some point, file access is (incorrectly) checked as root instead of as the target user. This is a bit of a showstopper for me. Any plans to address this? I attach the output of "dovecot -n", fwiw, but I don't think that this is a configuration problem... Anne. -- Ms. Anne Bennett, Senior Sysadmin, ENCS, Concordia University, Montreal H3G 1M8 anne(a)encs.concordia.ca +1 514 848-2424 x2285

2 4

Compression: all or nothing?
by Alex King 03 Oct '23

03 Oct '23

Using 2.3.13 (89f716dc2) (debian package), with mdbox storage. I considering adding the zlib plugin. I understand that reading mail can cope with either compressed or uncompressed mailboxes. I'm wondering if I can leave the main storage uncompressed, while having the alternate storage compressed. There does not seem to be a way to configure this, from https://doc.dovecot.org/settings/plugin/zlib-plugin/ it seems compression (on saving emails) is an all-or-nothing option? Can I leave zlib_save unset in my main configuration, and have doveadm use some alternate configuration with zlib_save set? It doesn't look hopeful because I don't see the ability to use a different config at https://wiki.dovecot.org/Tools/Doveadm/Altmove. Perhaps I would need multiple copies of the daemon running? Or is it better just to compress everything? I plan to store older mails (perhaps 3months+) in the alternative storage, and was thinking it would be nice to have those compressed, while I don't need to compress the main store. Any feedback welcome. Thanks, Alex

2 2

auth: Panic: file oauth2-request.c assertion failed
by Urban Loesch 05 Sep '23

05 Sep '23

Hi, I'm running a postfix smtp relay server on which users are getting authenticated trough sasl via the dovecot authentication service. This works without problems. Recently I extended my configuration to authenticate users with the PLAIN mechanism against Azure AD B2C with oauth2 in the future. Important to mention is that currently no users are stored in Azure B2C. I only prepared the hole configuration and authentiucation falls back to mysql database. Now sometimes I get the error below in my logs (not permanently): ... Dec 7 11:36:49 relay-out1 dovecot: auth: Panic: file oauth2-request.c: line 201 (oauth2_request_start): assertion failed: (oauth2_valid_token(input->token)) Dec 7 11:36:49 relay-out1 dovecot: auth: Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(backtrace_append+0x3d) [0x7f399402e62d] -> /usr/lib/dovecot/libdovecot.so.0(backtrace_get+0x1e) [0x7f399402e74e] -> /usr/lib/dovecot/libdovecot.so.0(+0x1006eb) [0x7f399403b6eb] -> /usr/lib/dovecot/libdovecot.so.0(+0x100781) [0x7f399403b781] -> /usr/lib/dovecot/libdovecot.so.0(+0x54b7c) [0x7f3993f8fb7c] -> /usr/lib/dovecot/libdovecot.so.0(+0x4605a) [0x7f3993f8105a] -> /usr/lib/dovecot/libdovecot.so.0(oauth2_passwd_grant_start+0xfa) [0x7f3993f9870a] -> dovecot/auth(db_oauth2_lookup+0x2ca) [0x560d0804368a] -> dovecot/auth(auth_request_default_verify_plain_continue+0x2d6) [0x560d08026436] -> dovecot/auth(auth_policy_check+0x2b) [0x560d0802071b] -> dovecot/auth(+0x29f72) [0x560d0802ff72] -> dovecot/auth(auth_request_handler_auth_continue+0xf7) [0x560d0802a197] -> dovecot/auth(+0x16c62) [0x560d0801cc62] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x69) [0x7f3994051c29] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run_internal+0x131) [0x7f3994053251] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x4c) [0x7f3994051ccc] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_run+0x40) [0x7f3994051e50] -> /usr/lib/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f3993fc4df3] -> dovecot/auth(main+0x415) [0x560d0801abf5] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xeb) [0x7f3993cee09b] -> dovecot/auth(_start+0x2a) [0x560d0801ad8a] ... After the error above postfix says the connection to the authentication server was lost: ... Dec 7 11:36:49 relay-out1 rolrelayout1/smtpd[1655601]: warning: domain.com[12.12.12.12]: SASL LOGIN authentication failed: Connection lost to authentication server ... I was able to make a core dump. ... # gdb /usr/lib/dovecot/auth core.auth.1654357.1670409409 GNU gdb (Debian 8.2.1-2+b3) 8.2.1 ... For help, type "help". Type "apropos word" to search for commands related to "word"... Reading symbols from /usr/lib/dovecot/auth...Reading symbols from /usr/lib/debug/.build-id/bc/f14ed9cc2dda3ee9565fbd7ccd835460008438.debug...done. done. [New LWP 1654357] [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Core was generated by `dovecot/auth'. Program terminated with signal SIGABRT, Aborted. #0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50 50 ../sysdeps/unix/sysv/linux/raise.c: Datei oder Verzeichnis nicht gefunden. (gdb) bt full #0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50 set = {__val = {0, 1415, 1416, 94613970086496, 10, 139885273538955, 155, 139885273347109, 140724590457408, 118, 206158430224, 140724590457744, 140724590457536, 16888407779496842752, 94613970086472, 139885273131758}} pid = <optimized out> tid = <optimized out> ret = <optimized out> #1 0x00007f3993cec535 in __GI_abort () at abort.c:79 save_stage = 1 act = {__sigaction_handler = {sa_handler = 0x73f, sa_sigaction = 0x73f}, sa_mask = {__val = {1024, 18446744073709551615, 94613971926672, 94613971631792, 139885273108347, 94613970084312, 139885273090236, 94613970084312, 16888407779496842752, 94613970084288, 139885273346402, 140724590457744, 94613970084312, 140724590457744, 139885273346761, 94613970084312}}, sa_flags = -1811749030, sa_restorer = 0x5} sigs = {__val = {32, 0 <repeats 15 times>}} #2 0x00007f3993f8feaf in default_fatal_finish (status=0, type=LOG_TYPE_PANIC) at failures.c:465 backtrace = 0x560d0813e220 "/usr/lib/dovecot/libdovecot.so.0(backtrace_append+0x3d) [0x7f399402e62d] -> /usr/lib/dovecot/libdovecot.so.0(backtrace_get+0x1e) [0x7f399402e74e] -> /usr/lib/dovecot/libdovecot.so.0(+0x1006eb) [0x7f39"... backtrace = <optimized out> recursed = 0 #3 fatal_handler_real (ctx=<optimized out>, format=<optimized out>, args=<optimized out>) at failures.c:477 status = 0 #4 0x00007f399403b781 in i_internal_fatal_handler (ctx=<optimized out>, format=<optimized out>, args=<optimized out>) at failures.c:879 No locals. #5 0x00007f3993f8fb7c in i_panic (format=format@entry=0x7f399407a0e8 "file %s: line %d (%s): assertion failed: (%s)") at failures.c:530 ctx = {type = LOG_TYPE_PANIC, exit_status = 0, timestamp = 0x0, timestamp_usecs = 0, log_prefix = 0x0, log_prefix_type_pos = 0} args = {{gp_offset = 40, fp_offset = 48, overflow_arg_area = 0x7ffcff39b4e0, reg_save_area = 0x7ffcff39b420}} #6 0x00007f3993f8105a in oauth2_request_start (set=0x560d08176150, input=0x7ffcff39b5d0, callback=0x560d08042b50 <db_oauth2_lookup_passwd_grant>, context=0x560d082ffe90, p=0x560d082b7eb0, method=0x7f399407a2c6 "POST", url=0x560d08178480 "https://xxx.b2clogin.com/xxx.onmicrosoft.com/B2C_1_ropc/oauth2/v2.0/token?s…", payload=0x560d082b7ed8, add_auth_bearer=false) at oauth2-request.c:201 __func__ = "oauth2_request_start" pool = <optimized out> req = <optimized out> #7 0x00007f3993f9870a in oauth2_passwd_grant_start (set=set@entry=0x560d08176150, input=input@entry=0x7ffcff39b5d0, username=0x560d082ffe38 "user.name", password=0x560d082ffe48 "", callback=callback@entry=0x560d08042b50 <db_oauth2_lookup_passwd_grant>, context=context@entry=0x560d082ffe90) at oauth2-request.c:351 pool = 0x560d082b7eb0 payload = 0x560d082b7ed8 #8 0x0000560d0804368a in db_oauth2_lookup (db=0x560d08176060, req=0x560d082ffe90, token=<optimized out>, request=0x560d082ffba8, callback=0x560d080370b0 <oauth2_verify_plain_continue>, context=0x560d082ffba8) at db-oauth2.c:862 input = {token = 0x560d082ffe48 "", service = 0x560d082ffe20 "smtp", local_ip = {family = 2, u = {ip6 = {__in6_u = {__u6_addr8 = "\303\376\374\322", '\000' <repeats 11 times>, __u6_addr16 = {65219, 54012, 0, 0, 0, 0, 0, 0}, __u6_addr32 = {3539795651, 0, 0, 0}}}, ip4 = {s_addr = 3539795651}}}, real_local_ip = {family = 2, u = {ip6 = {__in6_u = {__u6_addr8 = "\303\376\374\322", '\000' <repeats 11 times>, __u6_addr16 = {65219, 54012, 0, 0, 0, 0, 0, 0}, __u6_addr32 = {3539795651, 0, 0, 0}}}, ip4 = {s_addr = 3539795651}}}, remote_ip = {family = 2, u = {ip6 = {__in6_u = {__u6_addr8 = "*\300\070\226", '\000' <repeats 11 times>, __u6_addr16 = {49194, 38456, 0, 0, 0, 0, 0, 0}, __u6_addr32 = {2520301610, 0, 0, 0}}}, ip4 = {s_addr = 2520301610}}}, real_remote_ip = {family = 2, u = {ip6 = {__in6_u = {__u6_addr8 = "*\300\070\226", '\000' <repeats 11 times>, __u6_addr16 = { 49194, 38456, 0, 0, 0, 0, 0, 0}, __u6_addr32 = {2520301610, 0, 0, 0}}}, ip4 = {s_addr = 2520301610}}}, local_port = 0, real_local_port = 0, remote_port = 0, real_remote_port = 0} __func__ = "db_oauth2_lookup" #9 0x0000560d08026436 in auth_request_default_verify_plain_continue (request=0x560d082ffba8, callback=0x560d0803e6f0 <plain_verify_callback>) at auth-request.c:1123 passdb = 0x560d0814da40 result = 22029 cache_key = <optimized out> error = 0x560d082ffe38 "user.name" password = 0x560d082ffe48 "" __func__ = "auth_request_default_verify_plain_continue" #10 0x0000560d0802071b in auth_policy_check (request=<optimized out>, password=<optimized out>, cb=<optimized out>, context=<optimized out>) at auth-policy.c:575 pool = <optimized out> ctx = <optimized out> #11 0x0000560d0802ff72 in mech_plain_auth_continue (request=0x560d082ffba8, data=0x560d0813d368 "user.name", data_size=30) at mech-plain.c:58 authid = <optimized out> authenid = 0x560d0813d377 "user.name" error = 0x560d0813d320 "h\323\023\b\rV" pass = 0x560d0813d388 "" i = <optimized out> len = <optimized out> count = 2 #12 0x0000560d0802a197 in auth_request_handler_auth_continue (handler=0x560d082d1ae8, args=args@entry=0x560d08268e96 "21\tdGhvbWFzLmZlcnJhcmkAdGhvbWFzLmZlcnJhcmkA") at auth-request-handler.c:738 request = 0x560d082ffba8 data = 0x560d08268e99 "dGhvbWFzLmZlcnJhcmkAdGhvbWFzLmZlcnJhcmkA" data_len = 40 buf = 0x560d0813d320 id = 21 #13 0x0000560d0801cc62 in auth_client_handle_line (line=0x560d08268e91 "CONT\t21\tdGhvbWFzLmZlcnJhcmkAdGhvbWFzLmZlcnJhcmkA", conn=0x560d08276d30) at auth-client-connection.c:228 No locals. #14 auth_client_input (conn=<optimized out>) at auth-client-connection.c:311 _data_stack_cur_id = 3 line = <optimized out> ret = <optimized out> #15 0x00007f3994051c29 in io_loop_call_io (io=0x560d0826f240) at ioloop.c:737 ioloop = 0x560d08145f80 t_id = 2 __func__ = "io_loop_call_io" #16 0x00007f3994053251 in io_loop_handler_run_internal (ioloop=ioloop@entry=0x560d08145f80) at ioloop-epoll.c:222 ctx = 0x560d08148600 events = <optimized out> event = 0x560d08148680 list = 0x560d082ae620 io = <optimized out> tv = {tv_sec = 0, tv_usec = 315566} events_count = <optimized out> msecs = <optimized out> ret = <optimized out> i = 0 j = <optimized out> call = <optimized out> __func__ = "io_loop_handler_run_internal" #17 0x00007f3994051ccc in io_loop_handler_run (ioloop=0x560d08145f80) at ioloop.c:789 __func__ = "io_loop_handler_run" #18 0x00007f3994051e50 in io_loop_run (ioloop=0x560d08145f80) at ioloop.c:762 __func__ = "io_loop_run" #19 0x00007f3993fc4df3 in master_service_run (service=0x560d08145dd0, callback=<optimized out>) at master-service.c:869 No locals. #20 0x0000560d0801abf5 in main (argc=<optimized out>, argv=<optimized out>) at main.c:393 c = <optimized out> ... And "doveconf -n": ... # 2.3.19.1 (9b53102964): /etc/dovecot/dovecot.conf # OS: Linux 5.10.0-18-amd64 x86_64 Debian 10.13 # Hostname: relay-out1.domain.com auth_cache_negative_ttl = 0 auth_cache_size = 40 M auth_cache_ttl = 30 days auth_mechanisms = plain login auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_%@ auth_username_translation = %@ auth_verbose = yes auth_verbose_passwords = plain auth_worker_max_count = 100 disable_plaintext_auth = no namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = /etc/dovecot/dovecot-oauth2.plain.conf.ext driver = oauth2 mechanisms = plain login } passdb { args = /etc/dovecot/dovecot-sql-account.conf driver = sql } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } } userdb { args = /etc/dovecot/dovecot-sql-account.conf driver = sql } ... System OS is Debian 10, Dovecot installed from dovecot repository. Many thanks Urban

1 1

Pigeonhole redirect is adding a message-id header when it already exists
by Sébastien Riccio 04 Aug '23

04 Aug '23

Hello, We are using sieve filter to redirect incoming mails to an external mailbox (gmail) an we are seeing some forwarded e-mails being rejected by gmail because of duplicate headers. I think was able to identify the probable cause of the duplicate headers: It seems that when the original message's "Message-ID" is not compliant, pigeonhole acts like if the header is not existing and adds it's own Message-ID. This result in having two "Message-ID" headers being submitted to the destination mail server. Original Message-ID: Message-ID: 1883biz_pay_after_purchase:0:0_572392900$ae7ed6e4d53b424c84aaf83b30c507e7 Pigeon hole adds his own Message-ID: Message-ID: <dovecot-sieve-1664386049-21512-0@510faa1ff2d9> Gmail answer: 550-5.7.1 [94.103.100.17] Our system has detected that this message is not RFC 550-5.7.1 5322 compliant: duplicate headers. To reduce the amount of spam sent 550-5.7.1 to Gmail, this message has been blocked. Please review 550 5.7.1 RFC 5322 specifications for more information. While I understand the original "Message-ID" seems to be all but compliant with RFCs, shouldn't a "Message-ID" be added only when "Message-ID" is really missing ? When redirecting a message, If the original "Message-ID" exists but is bogus shouldn't it still be forwarded untouched ? Also, maybe if pigeonhole is adding it's own "Message-ID", shouldn't it remove any previous "Message-ID" to avoid generating duplicate headers ? (but maybe it could break some DKIM stuff?) Any ideas how to workaround this issue ? Thanks a lot for your feedbacks! Sébastien RICCIO SYSTEM ADMINISTRATOR P +41 840 888 888 F +41 840 888 000 M sriccio(a)swisscenter.com<mailto:sriccio@swisscenter.com>

9 17