- dovecot - dovecot.org

[Dovecot] acl flag to limit imap_acl based acl changes
by Amon Ott 26 Jan '10

26 Jan '10

Hi all! I have tried the imap_acl plugin with 1.2.9 today, but was not able to limit acl changes for those mailboxes where acl changes should be forbidden. http://wiki.dovecot.org/ACL says that "a" or "admin" covers "Administration rights to the mailbox". However, removing "a" from owner acl (using "lr") does not help, the user can still change all acl flags for all users with imap. Write accesses to mails are forbidden as they should. Is this intended or a bug? We would like to give all users the ability to use ACLs through IMAP, but the current behaviour endangers our read-only mail archives. Amon Ott -- Dr. Amon Ott - m-privacy GmbH Am Köllnischen Park 1, 10179 Berlin Tel: +49 30 24342334 Fax: +49 30 24342336 Web: http://www.m-privacy.de Handelsregister: Amtsgericht Charlottenburg HRB 84946 Geschäftsführer: Dipl.-Kfm. Holger Maczkowsky, Roman Maczkowsky GnuPG-Key-ID: EA898571

2 3

[Dovecot] dovecot 1.2.9 crash on subscribe with shared namespace
by Alessandro Bono 26 Jan '10

26 Jan '10

Hi all I'm testing dovecot to migrate from a cyrus 2.2 With TB2 if I use "subscribe" dovecot crash but only if I enable a shared namespace. Without explicit namespace or only with private namespace "subscribe" works Is this a problem already fixed in 1.2.10? is it a problem of my configuration? I tried different value for location in shared namespace but without any difference Below some info + gdb backtrace + dovecot -n Thanks Dovecot is version 1:1.2.9-1ubuntu2 from ubuntu lucid recompiled for ubuntu hardy on a xen domu amd64, fs is xfs warning: Can't read pathname for load map: Input/output error. Loaded symbols for /usr/lib/dovecot/imap Reading symbols from /lib/libdl.so.2...done. Loaded symbols for /lib/libdl.so.2 Reading symbols from /lib/librt.so.1...done. Loaded symbols for /lib/librt.so.1 Reading symbols from /lib/libc.so.6...done. Loaded symbols for /lib/libc.so.6 Reading symbols from /lib/ld-linux-x86-64.so.2...done. Loaded symbols for /lib64/ld-linux-x86-64.so.2 Reading symbols from /lib/libpthread.so.0...done. Loaded symbols for /lib/libpthread.so.0 Reading symbols from /usr/lib/dovecot/modules/imap/lib01_acl_plugin.so...done. Loaded symbols for /usr/lib/dovecot/modules/imap/lib01_acl_plugin.so Reading symbols from /usr/lib/dovecot/modules/imap/lib02_imap_acl_plugin.so...Reading symbols from /usr/lib/debug/usr/lib/dovecot/modules/imap/lib02_imap_acl_plugin.so...done. done. Loaded symbols for /usr/lib/dovecot/modules/imap/lib02_imap_acl_plugin.so Core was generated by `imap [sandro(a)mydomain.com x.x.x.x]'. Program terminated with signal 11, Segmentation fault. [New process 7474] #0 0x00007fc4c0ff37f3 in t_malloc_real (size=512, permanent=false) at data-stack.c:306 306 data-stack.c: No such file or directory. in data-stack.c (gdb) bt full #0 0x00007fc4c0ff37f3 in t_malloc_real (size=512, permanent=false) at data-stack.c:306 block = <value optimized out> ret = <value optimized out> alloc_size = <value optimized out> #1 0x00007fc4c0ff39fb in t_buffer_get (size=512) at data-stack.c:445 ret = (void *) 0x7fffb4dfc090 #2 0x00007fc4c100730e in vstrconcat (str1=0x7fc4c1010413 "", args=0x7fffb4dfc070, ret_len=0x7fffb4dfc088) at strfuncs.c:161 str = <value optimized out> temp = 0x0 bufsize = 512 i = 0 len = <value optimized out> __PRETTY_FUNCTION__ = "vstrconcat" #3 0x00007fc4c1007a93 in t_strconcat (str1=0x200 <Address 0x200 out of bounds>) at strfuncs.c:265 args = {{gp_offset = 8, fp_offset = 48, overflow_arg_area = 0x7fffb4dfc150, reg_save_area = 0x7fffb4dfc090}} len = 140482972553720 #4 0x00007fc4c0fa7ee4 in shared_storage_get_namespace (_storage=0x7fc4c125e258, _name=0x7fffb4dfc1f8, ns_r=0x7fffb4dfc208) at shared-storage.c:216 user = (struct mail_user *) 0x7fc4c125b5b8 tab = <value optimized out> ns = <value optimized out> owner = <value optimized out> domain = 0x7fc4c125b607 "lazzero.com" username = 0x7fc4c1010413 "" userdomain = 0x0 name = 0x7fc4c1010413 "" p = <value optimized out> next = 0x0 dest = (const char **) 0x7fffb4dfc198 error = <value optimized out> prefix = <value optimized out> location = <value optimized out> ret = <value optimized out> static_tab = {{key = 117 'u', value = 0x0, long_key = 0x7fc4c1017c0b "user"}, {key = 110 'n', value = 0x0, long_key = 0x7fc4c10151ea "username"}, {key = 100 'd', value = 0x0, long_key = 0x7fc4c10151f3 "domain"}, {key = 104 'h', value = 0x0, long_key = 0x7fc4c10151c1 "home"}, {key = 0 '\0', value = 0x0, long_key = 0x0}} #5 0x00007fc4c0fa777f in shared_list_get_path (list=<value optimized out>, name=0x7fc4c1010413 "", type=MAILBOX_LIST_PATH_TYPE_DIR) at shared-list.c:93 ns = (struct mail_namespace *) 0x0 #6 0x00007fc4c0fa7798 in shared_list_get_path (list=<value optimized out>, name=0x7fc4c1010413 "", type=MAILBOX_LIST_PATH_TYPE_DIR) at shared-list.c:107 ns = (struct mail_namespace *) 0x7fc4c125e190 #7 0x00007fc4c0fa7798 in shared_list_get_path (list=<value optimized out>, name=0x7fc4c1010413 "", type=MAILBOX_LIST_PATH_TYPE_DIR) at shared-list.c:107 ns = (struct mail_namespace *) 0x7fc4c125e190 #8 0x00007fc4c0fa7798 in shared_list_get_path (list=<value optimized out>, name=0x7fc4c1010413 "", type=MAILBOX_LIST_PATH_TYPE_DIR) at shared-list.c:107 ns = (struct mail_namespace *) 0x7fc4c125e190 and so on # 1.2.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.24-26-xen x86_64 Ubuntu 8.04.3 LTS xfs log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s managesieve ssl_cert_file: /etc/ssl/certs/mydomain-server.pem ssl_key_file: /etc/ssl/private/mydomain-server.key ssl_cipher_list: ALL:!LOW:!SSLv2 verbose_ssl: yes login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login login_greeting: Mail server ready. verbose_proctitle: yes first_valid_uid: 113 last_valid_uid: 113 first_valid_gid: 122 last_valid_gid: 122 mail_privileged_group: mail mail_uid: 113 mail_gid: 122 mail_location: maildir:/var/spool/mail/%d/%n/Maildir:LAYOUT=fs mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugins(default): acl imap_acl mail_plugins(imap): acl imap_acl mail_plugins(pop3): mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve imap_client_workarounds(default): delay-newmail tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail tb-extra-mailbox-sep imap_client_workarounds(pop3): imap_client_workarounds(managesieve): imap_id_log(default): * imap_id_log(imap): * imap_id_log(pop3): imap_id_log(managesieve): pop3_uidl_format(default): %08Xu%08Xv pop3_uidl_format(imap): %08Xu%08Xv pop3_uidl_format(pop3): %v.%u pop3_uidl_format(managesieve): %08Xu%08Xv pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh pop3_client_workarounds(managesieve): namespace: type: private separator: / inbox: yes list: yes subscriptions: yes namespace: type: shared separator: / prefix: shared/%%n location: maildir:/var/spool/mail/%%d/%%n/Maildir:INDEX=~/Maildir/shared/%%u:LAYOUT=fs list: children lda: postmaster_address: postmaster(a)mydomain.com hostname: mx1.mydomain.com mail_plugins: acl auth_socket_path: /var/run/dovecot/auth-master auth default: mechanisms: plain login realms: mydomain.com default_realm: mydomain.com verbose: yes passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf userdb: driver: static args: uid=113 gid=122 home=/var/spool/mail/%d/%n allow_all_users=yes socket: type: listen client: path: /var/run/dovecot/auth-client mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail plugin: acl: vfile -- Cordiali Saluti Alessandro Bono

2 2

[Dovecot] Released Pigeonhole Sieve v0.1.15 and ManageSieve v0.11.11 for Dovecot v1.2.10
by Stephan Bosch 25 Jan '10

25 Jan '10

Hello Dovecot users, It's been a while since the last Pigeonhole Sieve and ManageSieve releases. That is why this release includes quite a few changes. Most interestingly, the include extension is updated to match the most recent specification, the Sieve interpreter now includes plugin support and ManageSieve now has support for enforcing quota on the size of scripts, the number of scripts and the space the scripts occupy on disk. Other than that, quite a few small bugs were fixed. One of which was in the i;ascii-numeric comparator. If one of the matched strings did not start with a digit, the comparator would always yield a 'less-than' result. In stead it should have considered the string starting with the non-digit character as having a positive infinite value. Elsewhere in this list, Julian Cowley pointed out that negative values also start with a non-digit character, which some people may not have understood (i.e. i;ascii-numeric works only on unsigned values). The bug fix in this release could therefore change result of certain misconceived (and probably spam-related) Sieve rules, so watch out! I started work on the spamtest(plus) and virustest extensions. These are implemented for the most part, but their configurability needs quite a bit more work. Changelog Sieve v0.1.15: * Enotify extension: - Adjusted notify method API for addition of new notification methods. - Set default importance level to 'normal' (was 'high'). * Include extension: updated implementation towards most recent specification (all should be backwards compatible): - Implemented global variables namespace. - Global command may now appear anywhere in a script. - Implemented script name checking using the requirements specified in the ManageSieve draft. - One issue remains: ManageSieve currently requires included scripts to be uploaded first, which is not according to specification. * Changed envelope path parser to allow to and from envelope addresses that have no domain part. + Added preliminary support for Sieve plugins and added support for installing Sieve development headers. + Started work on the implementation of the spamtest, spamtestplus and virustest extensions (unfinished). + Deprecated notify extension: implemented denotify command. + Variables extension: added support for variable namespaces. + Added configurable script size limit. Compiler will refuse to compile files larger than sieve_max_script_size. + Testsuite changes: - Added support for changing and testing an extension's configuration. - Added a command line parameter for copying errors to stderr. - Fixed a bug in the i;ascii-numeric comparator. If one of the strings started with a non-digit character, the comparator would always yield less-than. - Imap4flags extension: fixed bug in removeflag: removing a single flag failed due to off-by-one error (bug report by Julian Cowley). - Improved EACCES error messages for stat() and lstat() syscalls and slightly improved error messages that may uccur when saving a binary. - Vacation extension: fixed typo in runtime log message (patch by Julian Cowley). - Fixed use of minus '-' in man pages; it is now properly escaped. - Fixed parser recovery. In particular cases it would trigger spurious errors after an initial valid error and sometimes additional errors were inappropriately ignored. Changelog ManageSieve v0.11.11: * This release contains adjustments to match changes in the Sieve API. This means that this release will only compile against Pigeonhole Sieve v0.1.15. + Implemented ManageSieve QUOTA enforcement. + Added MAXREDIRECTS capability after login. + Implemented new script name rules specified in most recent ManageSieve draft. - Fixed assertion failure occuring with challenge-response SASL mechanisms. - Made configure complain about trying to compile against installed Dovecot headers alone. - Fixed compile warning for compilation against CMUSieve. The releases are available as follows: Sieve: http://www.rename-it.nl/dovecot/1.2/dovecot-1.2-sieve-0.1.15.tar.gz http://www.rename-it.nl/dovecot/1.2/dovecot-1.2-sieve-0.1.15.tar.gz.sig ManageSieve (package + patch): http://www.rename-it.nl/dovecot/1.2/dovecot-1.2-managesieve-0.11.11.tar.gz http://www.rename-it.nl/dovecot/1.2/dovecot-1.2-managesieve-0.11.11.tar.gz.… http://www.rename-it.nl/dovecot/1.2/dovecot-1.2.10-managesieve-0.11.11.diff… http://www.rename-it.nl/dovecot/1.2/dovecot-1.2.10-managesieve-0.11.11.diff… Refer to http://pigeonhole.dovecot.org for more information. Have fun testing the new releases and don't hesitate to notify me when there are problems. Regards, -- Stephan Bosch stephan(a)rename-it.nl

2 3

[Dovecot] still asserts with 1.2.10
by Matthias Rieber 25 Jan '10

25 Jan '10

Hi, I've still asserts while accessing virtual folders: Program terminated with signal 6, Aborted. [New process 6714] #0 0xf7e57556 in raise () from /lib/libc.so.6 #0 0xf7e57556 in raise () from /lib/libc.so.6 No symbol table info available. #1 0xf7e58d78 in abort () from /lib/libc.so.6 No symbol table info available. #2 0x080f2eb5 in default_fatal_finish (type=<value optimized out>, status=0) at failures.c:160 backtrace = 0x97a9978 "imap [0x80f2ea1] -> imap [0x80f2f22] -> imap [0x80f2879] -> imap(index_search_result_update_flags+0x295) [0x80b2435] -> /usr/local/lib/dovecot/imap/lib20_virtual_plugin.so [0xf7ca238d] -> /usr/local/l"... #3 0x080f2f22 in i_internal_fatal_handler (type=LOG_TYPE_PANIC, status=0, fmt=0x810baec "file %s: line %d (%s): assertion failed: (%s)", args=0xff805294 "?\021\bW") at failures.c:443 No locals. #4 0x080f2879 in i_panic (format=0x810baec "file %s: line %d (%s): assertion failed: (%s)") at failures.c:207 No locals. #5 0x080b2435 in index_search_result_update_flags (result=0x97e49c8, uids=0xff805540) at index-search-result.c:87 search_arg = {next = 0x97be3d0, type = SEARCH_UIDSET, value = {subargs = 0x0, seqset = {arr = {buffer = 0x97a9528, element_size = 8}, v = 0x97a9528, v_modifiable = 0x97a9528}, str = 0x0, time = 0, size = 0, flags = 0, search_flags = 0, thread_type = MAIL_THREAD_NONE, keywords = 0x0, modseq = 0x0, search_args = 0x0, search_result = 0x0}, context = 0x0, hdr_field_name = 0x0, not = 0, match_always = 0, result = -1} ret = <value optimized out> __PRETTY_FUNCTION__ = "index_search_result_update_flags" #6 0xf7ca238d in virtual_sync_backend_boxes (ctx=0x97dd378) at virtual-sync.c:733 _data_stack_cur_id = 4 i = 0 ret = 97 #7 0xf7ca326b in virtual_storage_sync_init (box=0x97bca58, flags=65) at virtual-sync.c:1486 sync_ctx = <value optimized out> ret = <value optimized out> #8 0x080b6bd2 in mailbox_sync (box=0x1a3a, flags=65, status_items=239, status_r=0xff805728) at mail-storage.c:593 ctx = <value optimized out> #9 0x08065238 in cmd_select_full (cmd=0x97b6aa8, readonly=false) at cmd-select.c:273 client = (struct client *) 0x97b6818 box = (struct mailbox *) 0xff805798 ctx = (struct imap_select_context *) 0x97b6b58 args = (const struct imap_arg *) 0x97b9328 mailbox = 0x97a92f0 "spam/disagree/spamassassin" ret = <value optimized out> __PRETTY_FUNCTION__ = "cmd_select_full" #10 0x08065999 in cmd_select (cmd=0x97b6aa8) at cmd-select.c:389 No locals. #11 0x08067c7c in client_command_input (cmd=0x97b6aa8) at client.c:612 client = (struct client *) 0x97b6818 command = <value optimized out> __PRETTY_FUNCTION__ = "client_command_input" #12 0x08067d19 in client_command_input (cmd=0x97b6aa8) at client.c:661 client = (struct client *) 0x97b6818 command = <value optimized out> __PRETTY_FUNCTION__ = "client_command_input" #13 0x08067e8d in client_handle_input (client=0x97b6818) at client.c:702 _data_stack_cur_id = 3 ret = false remove_io = <value optimized out> handled_commands = false __PRETTY_FUNCTION__ = "client_handle_input" #14 0x080687ef in client_input (client=0x97b6818) at client.c:753 cmd = <value optimized out> output = (struct ostream *) 0x97b69cc bytes = <value optimized out> __PRETTY_FUNCTION__ = "client_input" #15 0x080fbc50 in io_loop_handler_run (ioloop=0x97b11c8) at ioloop-epoll.c:208 ctx = (struct ioloop_handler_context *) 0x97b1c38 event = (const struct epoll_event *) 0x97b1c78 list = (struct io_list *) 0x97b6a50 io = (struct io_file *) 0x97b6a28 tv = {tv_sec = 1799, tv_usec = 999662} t_id = 2 msecs = <value optimized out> ret = 1 i = 0 j = 0 call = <value optimized out> #16 0x080fb0c0 in io_loop_run (ioloop=0x97b11c8) at ioloop.c:335 No locals. #17 0x080712fa in main (argc=) at main.c:327 No locals. Program terminated with signal 6, Aborted. [New process 11609] #0 0xf7db6556 in raise () from /lib/libc.so.6 #0 0xf7db6556 in raise () from /lib/libc.so.6 No symbol table info available. #1 0xf7db7d78 in abort () from /lib/libc.so.6 No symbol table info available. #2 0x080f2eb5 in default_fatal_finish (type=<value optimized out>, status=0) at failures.c:160 backtrace = 0x986b978 "imap [0x80f2ea1] -> imap [0x80f2f22] -> imap [0x80f2879] -> imap(index_search_result_update_flags+0x295) [0x80b2435] -> /usr/local/lib/dovecot/imap/lib20_virtual_plugin.so [0xf7c0138d] -> /usr/local/l"... #3 0x080f2f22 in i_internal_fatal_handler (type=LOG_TYPE_PANIC, status=0, fmt=0x810baec "file %s: line %d (%s): assertion failed: (%s)", args=0xffc2fa54 "?\021\bW") at failures.c:443 No locals. #4 0x080f2879 in i_panic (format=0x810baec "file %s: line %d (%s): assertion failed: (%s)") at failures.c:207 No locals. #5 0x080b2435 in index_search_result_update_flags (result=0x988a918, uids=0xffc2fd00) at index-search-result.c:87 search_arg = {next = 0x9888490, type = SEARCH_UIDSET, value = {subargs = 0x0, seqset = {arr = {buffer = 0x986b528, element_size = 8}, v = 0x986b528, v_modifiable = 0x986b528}, str = 0x0, time = 0, size = 0, flags = 0, search_flags = 0, thread_type = MAIL_THREAD_NONE, keywords = 0x0, modseq = 0x0, search_args = 0x0, search_result = 0x0}, context = 0x0, hdr_field_name = 0x0, not = 0, match_always = 0, result = -1} ret = <value optimized out> __PRETTY_FUNCTION__ = "index_search_result_update_flags" #6 0xf7c0138d in virtual_sync_backend_boxes (ctx=0x987f5b8) at virtual-sync.c:733 _data_stack_cur_id = 4 i = 0 ret = 97 #7 0xf7c0226b in virtual_storage_sync_init (box=0xbf304e8, flags=65) at virtual-sync.c:1486 sync_ctx = <value optimized out> ret = <value optimized out> #8 0x080b6bd2 in mailbox_sync (box=0x2d59, flags=65, status_items=239, status_r=0xffc2fee8) at mail-storage.c:593 ctx = <value optimized out> #9 0x08065238 in cmd_select_full (cmd=0x9878aa8, readonly=false) at cmd-select.c:273 client = (struct client *) 0x9878818 box = (struct mailbox *) 0x0 ctx = (struct imap_select_context *) 0x9878b58 args = (const struct imap_arg *) 0x987b328 mailbox = 0x986b2f0 "spam/disagree/spamassassin" ret = <value optimized out> __PRETTY_FUNCTION__ = "cmd_select_full" #10 0x08065999 in cmd_select (cmd=0x9878aa8) at cmd-select.c:389 No locals. #11 0x08067c7c in client_command_input (cmd=0x9878aa8) at client.c:612 client = (struct client *) 0x9878818 command = <value optimized out> __PRETTY_FUNCTION__ = "client_command_input" #12 0x08067d19 in client_command_input (cmd=0x9878aa8) at client.c:661 client = (struct client *) 0x9878818 command = <value optimized out> __PRETTY_FUNCTION__ = "client_command_input" #13 0x08067e8d in client_handle_input (client=0x9878818) at client.c:702 _data_stack_cur_id = 3 ret = false remove_io = <value optimized out> handled_commands = false __PRETTY_FUNCTION__ = "client_handle_input" #14 0x080687ef in client_input (client=0x9878818) at client.c:753 cmd = <value optimized out> output = (struct ostream *) 0x98789cc bytes = <value optimized out> __PRETTY_FUNCTION__ = "client_input" #15 0x080fbc50 in io_loop_handler_run (ioloop=0x98731c8) at ioloop-epoll.c:208 ctx = (struct ioloop_handler_context *) 0x9873c38 event = (const struct epoll_event *) 0x9873c78 list = (struct io_list *) 0x9878a50 io = (struct io_file *) 0x9878a28 tv = {tv_sec = 4, tv_usec = 299733} t_id = 2 msecs = <value optimized out> ret = 1 i = 0 j = 0 call = <value optimized out> #16 0x080fb0c0 in io_loop_run (ioloop=0x98731c8) at ioloop.c:335 No locals. #17 0x080712fa in main (argc=) at main.c:327 No locals. config: # 1.2.10: /etc/dovecot/dovecot.conf # OS: Linux 2.6.26-2-vserver-amd64-uml x86_64 Debian 5.0.3 log_path: /dev/stderr log_timestamp: protocols: imap imaps pop3 pop3s managesieve ssl_cert_file: /etc/dovecot/imap.scheff32.de.pem ssl_key_file: /etc/dovecot/imap.scheff32.de.pem disable_plaintext_auth: no login_dir: /usr/local/var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_executable(managesieve): /usr/local/libexec/dovecot/managesieve-login mail_max_userip_connections(default): 20 mail_max_userip_connections(imap): 20 mail_max_userip_connections(pop3): 10 mail_max_userip_connections(managesieve): 10 mail_location: maildir:~/Maildir mail_executable(default): /usr/local/libexec/dovecot/rawlog /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/rawlog /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_executable(managesieve): /usr/local/libexec/dovecot/managesieve mail_process_size: 3072 mail_plugins(default): fts fts_squat zlib virtual mail_plugins(imap): fts fts_squat zlib virtual mail_plugins(pop3): zlib mail_plugins(managesieve): mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 mail_plugin_dir(managesieve): /usr/local/lib/dovecot/managesieve namespace: type: private separator: \ prefix: mail\ hidden: yes list: no subscriptions: yes namespace: type: private separator: . inbox: yes list: yes subscriptions: yes namespace: type: private separator: . prefix: INBOX. list: no subscriptions: yes namespace: type: public separator: . prefix: shared. location: maildir:/home/sharedbox/Maildir/:INDEX=~/Maildir/shared list: yes subscriptions: yes namespace: type: private separator: . prefix: virtual. location: virtual:~/Maildir/virtual list: yes subscriptions: yes lda: postmaster_address: postmaster(a)scheff32.de mail_plugins: sieve sendmail_path: /usr/lib/sendmail log_path: info_log_path: syslog_facility: mail auth default: username_format: %n master_user_separator: * verbose: yes passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf passdb: driver: passwd-file args: /etc/dovecot/passwd.masterusers master: yes userdb: driver: passwd args: system_groups_user=%u blocking=yes plugin: fts: squat fts_squat: partial=4 full=4 kind regards, matthias

2 2

[Dovecot] Delete messages with archivemail
by gstyle 25 Jan '10

25 Jan '10

Hi, I have set up a dovecot imap server (Version 1.0.15 on Debain Lenny). Until know I used courier. Every night I run a script calling archivemail ( http://archivemail.sourceforge.net/) to delete all messages in the Spam folder that are older than 30 days archivemail deletes the files directly in the Maildir folder. I am not using IMAP for this (cause I don't want to store the passwords in plain text). I know that dovecot uses index files to speed up Maildir access. Will there be any problems with the index files when I delete the old spam like this? Cheers Mario

4 5

[Dovecot] v1.2.10 released
by Timo Sirainen 25 Jan '10

25 Jan '10

http://dovecot.org/releases/1.2/dovecot-1.2.10.tar.gz http://dovecot.org/releases/1.2/dovecot-1.2.10.tar.gz.sig The Maildir bugs were common for everyone, although only NFS users seemed to notice for some reason. + %variables now support %{host}, %{pid} and %{env:ENVIRONMENT_NAME} everywhere. + LIST-STATUS capability is now advertised - maildir: Fixed several assert-crashes. - imap: LIST "" inbox shouldn't crash when using namespace with "INBOX." prefix. - lazy_expunge now ignores non-private namespaces.

1 0

[Dovecot] authentication with userdb and passdb fails
by Jure Lozar 25 Jan '10

25 Jan '10

Hello I cannot retrieve mail via pop3 using dovecot. I have mail in my mailbox (postfix works fine, maildir contains more then 5 mail files), I use virtual user. I also changed auth to plaintext for debugging purpuse. server: Dovecot 1.0.7 CenoOS 5.4 client: Thunderbird on Kubuntu, username: jure(a)hrabri.org pass:jure I tried different parameters and was closest to success with this: Relevant parts from dovecot.conf: auth default { mechanisms = plain login CRAM-MD5 userdb passwd-file { args = /home/vmail/%d/passwd } passdb passwd-file { args = /home/vmail/%d/shadow } log: Jan 24 16:23:49 hermes dovecot: auth(default): new auth connection: pid=3304 Jan 24 16:23:51 hermes dovecot: auth(default): client in: AUTH 1 PLAIN service=POP3 lip=::ffff:192.168.0.144 rip=::ffff:192.168.0.112 resp= Jan 24 16:23:51 hermes dovecot: auth(default): client out: CONT 1 Jan 24 16:23:51 hermes dovecot: auth(default): client in: CONT 1 AGp1cmVAaHJhYnJpLm9yZwBqdXJl Jan 24 16:23:51 hermes dovecot: auth(default): passwd-file /home/vmail/hrabri.org/shadow: Read 1 users Jan 24 16:23:51 hermes dovecot: auth(default): passwd-file(jure@hrabri.org,::ffff:192.168.0.112): lookup: user=jure file=/home/vmail/hrabri.org/shadow Jan 24 16:23:51 hermes dovecot: auth(default): client out: OK 1 user=jure(a)hrabri.org Jan 24 16:23:51 hermes dovecot: auth(default): master in: REQUEST 1 3300 1 Jan 24 16:23:51 hermes dovecot: auth(default): passwd(jure@hrabri.org,::ffff:192.168.0.112): lookup Jan 24 16:23:51 hermes dovecot: auth(default): passwd(jure@hrabri.org,::ffff:192.168.0.112): unknown user Jan 24 16:23:51 hermes dovecot: auth(default): passwd-file /home/vmail/hrabri.org/passwd: Read 1 users Jan 24 16:23:51 hermes dovecot: auth(default): passwd-file(jure@hrabri.org,::ffff:192.168.0.112): lookup: user=jure file=/home/vmail/hrabri.org/passwd Jan 24 16:23:51 hermes dovecot: auth(default): master out: USER 1 jure(a)hrabri.org uid=501 gid=501 home=/home/vmail/hrabri.org/var/spool/mail/jure Jan 24 16:23:51 hermes dovecot: pop3-login: Login: user=<jure(a)hrabri.org>, method=PLAIN, rip=::ffff:192.168.0.112, lip=::ffff:192.168.0.144 Jan 24 16:23:52 hermes dovecot: POP3(jure(a)hrabri.org): Disconnected: Logged out top=0/0, retr=0/0, del=0/0, size=0 I don't really understand this log. Is says Client out: OK, and then unknown user. Where? In passwd file? Adding domainname after username in passwd only makes it worse. And why master in? I did not configure master user. Thanks for any help. Jure

2 2

[Dovecot] pop3+leave messages on server
by Papp Tamas 24 Jan '10

24 Jan '10

hi All, I have a srange problem. Before dovecot there was a courier imap and it worked just fine. The client(s) are the same then before, so I think, this is an server side problem. I have a user with Outlook and he uses pop3 and leaves messages on server. Sometimes the messages get downloaded again, when he starts the outlook. Not all, but 7-9 hours back. uidl format is like it's suggested: pop3_uidl_format = %08Xu%08Xv Any idea, what's wrong and what I can do? Thank you very much, tamas

6 16

[Dovecot] strange behaviour with seen/unseen messages in virtual folders.
by Matthias Rieber 24 Jan '10

24 Jan '10

Hi, I've a virtual folder that contains unseen messages. When I mark the message and expunge the folder, the message should disappear. This works as expected in alpine. Alpine uses the following commands: 06000010 STORE 1 +Flags (\SEEN) 06000020 EXPUNGE Using roundcube mail, the message wont disappear, when I perform the same steps. RoundCube Mails sends: flg UID STORE 445 +FLAGS (\Seen) exp1 EXPUNGE But the message doesn't dissapear. But I can expunge it with alpine, as long as the folder contains one message. If it contains more messages, some or even all messages won't disappear. When I mark them as unseen/seen in alpine, I can expunge them with alpine. The expunge command send by roundcube mail never expunges any seen message in the unseen folder. Whether it was flagged as seen by alpine nor roundcube mail. kind regards, matthias

2 1

[Dovecot] Need simplest method for providing alternate mail location
by Stewart Dean 24 Jan '10

24 Jan '10

I am looking to migrate my DC V1.2 from mbox to maildir format....and want to do this in stages, user group by user group rather than in one horrendous fell swoop....since I'd rather fell things didn't happen. Since I'm running sendmail/procmail, I can change the ~/.procmailrc to change the writing of the INBOX, but the IMAP mail location access info is knottier when one wants to do things a bit at a time. Setting aside for now the matter of converting existing folders, I will be moving: = from a mbox setup with the INBOX in /var/spool/mail/<userid> and the folders in ~/mail = to both in ~/Maildir (unless someone has better ideas) It seems that one could: 1) Change the namespaces in the client...but this is not feasible, because it would means going out to all my 4000+ users desktop and modifying them. 2) Having some sort of db to tell DC it a mail_userdb extra field and override the mail_location in dovecot.conf 3) Perhaps waiting for DC v2.0 which will have this architected in. A) Is there any sense the v2.0 will be coming Real Soon Now and will fulfill #3? B) What's the simplest way to implement #2? I would really rather not install MySQL on my mail server and have all the overhead of installing and managing it when all I need it for is a temporary resource to tell DC where things are until the switchover is complete and Maildir is the default. Is it feasible to do this with an additional flat file in the /etc/passwd mode with some extra fields tacked on that is *only* used for mail location info? Or some other and simple way? My apologies if this is a Stupid Question............. -- ==== Once upon a time, the Internet was a friendly, neighbors-helping-neighbors small town, and no one locked their doors. Now it's like an apartment in Bed-Stuy: you need three heavy duty pick-proof locks, one of those braces that goes from the lock to the floor, and bars on the windows.... ==== Stewart Dean, Unix System Admin, Bard College, New York 12504 sdean(a)bard.edu voice: 845-758-7475, fax: 845-758-7035

2 1

[Dovecot] Compilation error
by Heiko Schlichting 24 Jan '10

24 Jan '10

Hi, the latest revision of dovecot 1.1 tree (576020ceda60) produces errors during compilation on Debian Lenny: [...] Making all in quota make[4]: Entering directory `/scratch/heiko/dovecot/dovecot-1-1-576020ceda60/src/plugins/quota' if /bin/sh ../../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../.. -I../../../src/lib -I../../../src/lib-dict -I../../../src/lib-index -I../../../src/lib-mail -I../../../src/lib-storage -I../../../src/lib-storage/index -I../../../src/lib-storage/index/maildir -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -Wstrict-aliasing=2 -MT quota-storage.lo -MD -MP -MF ".deps/quota-storage.Tpo" -c -o quota-storage.lo quota-storage.c; \ then mv -f ".deps/quota-storage.Tpo" ".deps/quota-storage.Plo"; else rm -f ".deps/quota-storage.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I../../.. -I../../../src/lib -I../../../src/lib-dict -I../../../src/lib-index -I../../../src/lib-mail -I../../../src/lib-storage -I../../../src/lib-storage/index -I../../../src/lib-storage/index/maildir -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -Wstrict-aliasing=2 -MT quota-storage.lo -MD -MP -MF .deps/quota-storage.Tpo -c quota-storage.c -fPIC -DPIC -o .libs/quota-storage.o quota-storage.c: In function 'quota_mailbox_sync_notify': quota-storage.c:339: error: 'namespaces' undeclared (first use in this function) quota-storage.c:339: error: (Each undeclared identifier is reported only once quota-storage.c:339: error: for each function it appears in.) Previous revision (af6526158608, 1.1.20) compiles without problems. Heiko Heiko Schlichting Freie Universität Berlin heiko(a)CIS.FU-Berlin.DE Zentraleinrichtung für Datenverarbeitung (ZEDAT) Telefon +49 30 838-54327 Fabeckstraße 32 Telefax +49 30 838454327 14195 Berlin

2 1

[Dovecot] Dovecot 1.2 & Thunderbird 3.0
by Proskurin Kirill 24 Jan '10

24 Jan '10

Hello. After updating to TB-3.0 I notice what sometimes messages in IMAP folder lost "seen flag". Entire folder star to be unseen fully. It happen often then I chose(click on it) some folder . Has some one have this bug too? root@mail [~]dovecot -n # 1.2.4: /usr/local/etc/dovecot.conf # OS: FreeBSD 7.1-RELEASE-p7 i386 ufs base_dir: /var/run/dovecot/ log_path: /var/log/dovecot/dovecot.log info_log_path: /var/log/dovecot/dovecot-debug.log protocols: imap imaps pop3 pop3s managesieve listen(default): * listen(imap): * listen(pop3): * listen(managesieve): *:2000 ssl_ca_file: /usr/local/etc/certs/GlobalSignCA.crt ssl_cert_file: /usr/local/etc/certs/fxclub_org.crt ssl_key_file: /usr/local/etc/certs/fxclub_org.key ssl_cipher_list: ALL:!LOW:!SSLv2 login_dir: /var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_executable(managesieve): /usr/local/libexec/dovecot/managesieve-login login_process_size: 128 login_processes_count: 20 login_max_processes_count: 512 mail_max_userip_connections(default): 256 mail_max_userip_connections(imap): 256 mail_max_userip_connections(pop3): 20 mail_max_userip_connections(managesieve): 10 verbose_proctitle: yes first_valid_gid: 0 mail_privileged_group: mail mail_uid: dmail mail_gid: dmail mail_location: maildir:/var/spool/dovecot/domains/%d/%n mail_debug: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_executable(managesieve): /usr/local/libexec/dovecot/managesieve mail_process_size: 512 mail_plugins(default): quota imap_quota autocreate mail_log mail_plugins(imap): quota imap_quota autocreate mail_log mail_plugins(pop3): quota mail_plugins(managesieve): mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 mail_plugin_dir(managesieve): /usr/local/lib/dovecot/managesieve imap_client_workarounds(default): delay-newmail tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail tb-extra-mailbox-sep imap_client_workarounds(pop3): imap_client_workarounds(managesieve): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh pop3_client_workarounds(managesieve): lda: postmaster_address: postmaster(a)fxclub.org hostname: mail.fxclub.org mail_plugins: sieve quota mail_plugin_dir: /usr/local/lib/dovecot/lda quota_full_tempfail: yes deliver_log_format: msgid=%m: %$ %f %s log_path: /var/log/dovecot/deliver.log info_log_path: /var/log/dovecot/deliver.log sendmail_path: /usr/sbin/sendmail rejection_reason: Your message to <%t> was automatically rejected:%n%r auth_socket_path: /var/run/dovecot/auth-master auth default: mechanisms: plain login user: dovecot-auth username_format: %Lu worker_max_count: 100 passdb: driver: ldap args: /usr/local/etc/dovecot-ldap.conf userdb: driver: ldap args: /usr/local/etc/dovecot-ldap.conf socket: type: listen client: path: /var/run/dovecot/auth-client mode: 432 user: exim master: path: /var/run/dovecot/auth-master mode: 384 user: dmail plugin: quota: maildir quota_rule: *:storage=1024M quota_rule2: Trash:storage=1256M quota_rule3: SPAM:ignore quota_warning: storage=95%% /usr/local/bin/quota-warning.sh 95 quota_warning2: storage=80%% /usr/local/bin/quota-warning.sh 80 autocreate: Trash autocreate2: Sent autocreate3: Spam autosubscribe: Trash autosubscribe2: Sent autosubscribe3: Spam sieve_dir: ~/sieve sieve: ~/.dovecot.sieve sieve_global_path: /var/spool/dovecot/global.sieve mail_log_events: delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields: uid box msgid size mail_log_max_lines_per_sec: 0 -- Best regards. Proskurin Kirill

5 7

[Dovecot] SpamAssassin and i;ascii-numeric comparator
by Julian Cowley 24 Jan '10

24 Jan '10

Hi Stephan, I noticed that you changed i;ascii-numeric comparator recently (<http://hg.rename-it.nl/dovecot-1.2-sieve/rev/17fb38aee85f>) to correct a small bug. I have an interest in this because I use the comparator to check for SpamAssassin scores. Before the fix, this was all that was necessary to check for scores above a certain value: header :value "ge" :comparator "i;ascii-numeric" "X-Spam-Score" "5" Since SpamAssassin includes negative scores and the i;ascii-numeric comparator doesn't recognize negative numbers, all negative scores are actually treated as positive infinity after the fix. Of course, this means mail which has a negative score then gets counted as spam. Now an additional test is necessary, something like this: allof(not header :matches "X-Spam-Score" "-*", header :value "ge" :comparator "i;ascii-numeric" "X-Spam-Score" "5") I thought I'd mention this because other people may get affected by this once 0.1.15 comes out. Here is a patch that makes further tests for the comparator between numeric and non-numeric values. Hope you can use it. -=- julian

2 1

[Dovecot] how to create maildir on local mail delivery
by Sebastian Logar 24 Jan '10

24 Jan '10

Hi! I am using Dovecot 1.0.10 with LDA/postfix option reading user data from ldap, but the problem would be nonexistent maildir. Connection with ldap should be fine since reading proper maildir folder. Is it possible to auto creating maildir folders even on received mail since the you can auto create when user login with mail_executable scripts as it's seen from configuration I am doing for pop3 and imap. Jan 23 00:23:17 dovecot postfix/qmgr[14579]: 75AADD212F: from=<someuser(a)domain.tld>, size=354, nrcpt=1 (queue active) Jan 23 00:23:17 dovecot deliver(erikp): Loading modules from directory: /usr/lib/dovecot/modules/lda Jan 23 00:23:17 dovecot deliver(erikp): Module loaded: /usr/lib/dovecot/modules/lda/lib10_quota_plugin.so Jan 23 00:23:17 dovecot deliver(erikp): auth input: erikp Jan 23 00:23:17 dovecot deliver(erikp): auth input: home=/nas/5b/7d/5f/erikp/www Jan 23 00:23:17 dovecot deliver(erikp): auth input: uid=5000 Jan 23 00:23:17 dovecot deliver(erikp): auth input: gid=5000 Jan 23 00:23:17 dovecot deliver(erikp): auth input: mail=/nas/5b/7d/5f/erikp/Maildir/ Jan 23 00:23:17 dovecot deliver(erikp): auth input: quota=maildir:storage=100000000 Jan 23 00:23:17 dovecot deliver(erikp): Home dir not found: /nas/5b/7d/5f/erikp/www Jan 23 00:23:17 dovecot deliver(erikp): maildir autodetect: stat(/nas/5b/7d/5f/erikp/Maildir//cur) failed: No such file or directory Jan 23 00:23:17 dovecot deliver(erikp): mbox autodetect: data=/nas/5b/7d/5f/erikp/Maildir/ Jan 23 00:23:17 dovecot deliver(erikp): mbox autodetect: INBOX file: stat(/nas/5b/7d/5f/erikp/Maildir/) failed: No such file or directory Jan 23 00:23:17 dovecot deliver(erikp): mbox autodetect: has .imap/: stat(/nas/5b/7d/5f/erikp/Maildir//.imap) failed: No such file or directory Jan 23 00:23:17 dovecot deliver(erikp): mbox autodetect: has inbox: stat(/nas/5b/7d/5f/erikp/Maildir//inbox) failed: No such file or directory Jan 23 00:23:17 dovecot deliver(erikp): mbox autodetect: has mbox: stat(/nas/5b/7d/5f/erikp/Maildir//mbox) failed: No such file or directory Jan 23 00:23:17 dovecot deliver(erikp): Ambiguous mail location setting, don't know what to do with it: /nas/5b/7d/5f/erikp/Maildir/ (try prefixing it with mbox: or maildir:) Jan 23 00:23:17 dovecot deliver(erikp): Failed to create storage for 'erikp' with mail '/nas/5b/7d/5f/erikp/Maildir/' Jan 23 00:23:17 dovecot postfix/pipe[15537]: 75AADD212F: to=<erikp(a)somelocaldomain.tld>, relay=dovecot, delay=2146, delays=2146/0.02/0/0.02, dsn=4.3.0, status=deferred (temporary failure) dovecot -n # 1.0.10: /etc/dovecot/dovecot.conf log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap pop3 disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_privileged_group: mail mail_debug: yes mail_executable(default): /usr/lib/dovecot/imap.sh mail_executable(imap): /usr/lib/dovecot/imap.sh mail_executable(pop3): /usr/lib/dovecot/pop3.sh mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv auth default: passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf userdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf socket: type: listen client: path: /var/run/dovecot/auth-client mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: vmail plugin: quota: maildir:storage=100000 Regards, Sebastian

2 5

[Dovecot] feature question: local delivery from SMTP
by Phil Howard 23 Jan '10

23 Jan '10

Does Dovecot really need a separate MTA for inbound mail? Or can it receive SMTP directly if there is no forwarding to do? What about spam/virus filtering in that case? -- Phil Howard KA9WGN - ka9wgn(a)gmail.com

6 7

[Dovecot] Mail process plans: multiple connections in a process + idle processes
by Timo Sirainen 23 Jan '10

23 Jan '10

Maybe for v2.1: imap and pop3 processes can currently handle multiple connections, but they're assigned pretty much randomly to processes. It would be better if it was possible to: a) Require that a process handles only a specific user's connections b) Require that a process handles only a specific UNIX UID's connections (e.g. if each domain has a separate UID) c) Prefer to put user's connections to same process, but don't require it. To do this, there needs to be a process between imap/pop3-login and imap/pop3. Let's call it imap/pop3-tracker process (or aggregator? or any suggestions?). This process accepts all connections coming from login processes when they've finished authenticating a connection. Internally it figures out if the connection should go to a new or an existing process. It keeps track of username -> { mail_process[], cookie (see idle processes below) } mail_process -> { unix_socket_fd, connection_count } So there's a connection to each mail process. This connection is used to send connection fds for the process to handle. It's also used to receive notifications when a connection is closed. The mail process sockets could also be used to communicate to a specific process. For example doveadm could use this in future to ask what a specific user or process is currently doing, by connecting to imap-tracker, which forwards the request to wanted process(es). The above isn't really anything new, just a more specific plan about what I had been thinking for a long time. A new and more interesting idea is to gather IDLEing imap connections under a few imap-idle processes: When a connection has been IDLEing for a few minutes (or something), and there's no special state in the connection (e.g. CONTEXT=SEARCH searches), the connection could be moved to a separate imap-idle process that simply waits for something to happen. When something does happen, it'll move the connection back to imap process, which restores state and continues. The idea would be to reduce the number of idling imap processes that are wasting memory. The state that needs to be saved and restored is: - selected mailbox name, GUID, UIDVALIDITY (for reliably selecting back the original mailbox, or reliably fail if it's gone) - flag: mailbox is EXAMINEd, not SELECTed - highest seen modseq - UIDs of \Recent messages - SEARCHRES extension: last saved SEARCH result - List of keywords that had been advertised in FLAGS/PERMANENTFLAGS reply to client. Or probably MD5 sum of it would be enough. If MD5 had changed, the list would be re-sent to client. - connection fd - paths that are being monitored with [id]notify/kqueue Connection is moved back when a) new command is received from connection fd, b) one of the monitored files changes. The connections are moved back via imap-tracker process, by sending the saved state along the request. For security there's a per-user security cookie (128 bits of randomness), which is sent to imap processes, and when restoring connection from imap-idle, the request must provide the correct cookie or imap-tracker fails the login. (Normally new post-login imap/pop3 connections can't be created without having authenticated first via dovecot-auth. They verify it.) So when connection comes back, imap process opens the mailbox based on saved information. If this fails for some reason (e.g. mailbox deleted), client gets disconnected. Next Dovecot gets a list of changes to mailbox since the saved modseq, and based on that sends the missing FETCH, EXPUNGE, EXISTS and RECENT events. Again if it somehow fails, the client gets disconnected. At least initially this would only be done for connections that are running IDLE command, because non-IDLE connections are a lot more difficult to restore to their original state. This is mainly because if a message gets expunged, it's still visible to the connection until it issues a command that allows sending EXPUNGE event. To handle that, there would have to be code that allows building a view of mailbox where there are some expunged messages. Also it can be difficult to find out the expunged messages' flags, unless they're also part of the saved state.

1 1

[Dovecot] format of file dict
by Frank Cusack 22 Jan '10

22 Jan '10

For shared (between users) mailboxes, I am using a file dict. plugin { acl_shared_dict = file:/etc/dovecot/acl_shared_dict/shared.db } What is the format of this file? I would like to manage it directly rather than have SETACL update it. I see lines which describe a sharing entry (the format of those looks obvious) but also lines with just a '1'. Do I just need to separate entries by lines with just '1' in them? -frank

2 1

[Dovecot] Thinderbird+delete+move to Trash folder
by Papp Tamás 22 Jan '10

22 Jan '10

hi All, I have a problem, which makes me headache. I can't find out, what is the problem. I have a mail szerver, which works just fine as expected, TB move messages to trash folder after I delete it, and they are moved. I have an other server. If I delete a message, it doesn't move to the Trash folder. As deleted_to_trash plugin is installed, if I only mark messages as deleted, they are moved to thee Trash folder and also with Outlook works well. It's like when a messages is deleted from TB, the message get moved to the Trash folder, and it's expunged(?) at the same time. Is it possible? Could you help me? The system is Ubuntu 9.04 with docecot 1.2.5-0~auto+0 from http://xi.rename-it.nl/debian/, but builded by myself for x86_64. Thank you, tamas

6 15

[Dovecot] Modifying the underlying maildir externally (webmail, replication)
by Attila Nagy 22 Jan '10

22 Jan '10

Hello, I have a setup where there are multiple maildir users, one of them being the pop/imap server itself, the others are for example a maildir capable webmail and message replication. I would like to evaluate Dovecot, but I wonder how would its binary indexes and logs fit into this picture. After running through http://wiki.dovecot.org/IndexFiles I'm not sure how well would Dovecot work with other programs modifying the maildirs (adding, deleting, moving messages, folders etc). The "Main index" section says "The index file is synchronized against mailbox only if the syncing information changes.", where syncing information consists or cur and new directories' timestamps. Does that mean I am safe there? The cache file is hopefully just a cache, so it won't contain information from messages which are inserted or moved by an external program, and I assume Dovecot fetches the message lists and other information from the main index, which seems to be OK. The transaction log is for the main index, so if the latter is OK, the former should be OK too. http://wiki.dovecot.org/MailboxFormat/Maildir talks about MUAs and there nothing scary can be found, except for some temporary conditions, where the changes won't propagate to Dovecot in real time, but it's OK. Are the above right, and can Dovecot use its indexes and caches safely with others using the same maildirs? Thanks,

3 3

[Dovecot] ldap login with userid
by spamvoll＠googlemail.com 22 Jan '10

22 Jan '10

hi.. Dovecot Version 1.2.9 im trying to login to dovecot with my ldap uid. currently im using: user_attrs = homeDirectory=home,uid=mail=maildir:/mail/%$ user_filter = (&(objectClass=gosaMailAccount)(|(mail=%u)(gosaMailAlternateAddress=%u))) to match the mailaddress and deliver the mail to the users homdir (/mail/uid_of_the_user) But i cant login to dovecot: pass_attrs = uid=user,userPassword=password pass_filter = (&(objectClass=gosaMailAccount)(uid=%u)) the Log: Jan 22 17:21:51 testimap dovecot: auth(default): client in: AUTH 1 PLAIN service=imap secured lip=10.0.0.15 rip=10.0.0.20 lport=993 rport=36879 Jan 22 17:21:51 testimap dovecot: auth(default): client out: CONT 1 Jan 22 17:21:51 testimap dovecot: auth(default): client in: CONT 1 AG1zbWlhdGVrAHRpYWFrdGVuZXI= Jan 22 17:21:51 testimap dovecot: auth(default): ldap(myuser,10.0.0.20): bind search: base=dc=example,dc=com filter=(&(objectClass=gosaMailAccount)(uid=myuser)) Jan 22 17:21:51 testimap dovecot: auth(default): ldap(myuser,10.0.0.20): result: uid(user)=myuser Jan 22 17:21:51 testimap dovecot: auth(default): client out: OK 1 user=myuser Jan 22 17:21:51 testimap dovecot: auth(default): master in: REQUEST 1 2541 1 Jan 22 17:21:51 testimap dovecot: auth(default): passwd(myuser,10.0.0.20): lookup Jan 22 17:21:51 testimap dovecot: auth(default): passwd(myuser,10.0.0.20): unknown user Jan 22 17:21:51 testimap dovecot: auth(default): ldap(myuser,10.0.0.20): user search: base=dc=example,dc=com scope=subtree filter=(&(objectClass=gosaMailAccount)(|(mail=myuser)(gosaMailAlternateAddress=myuser))) fields=homeDirectory,uid Jan 22 17:21:51 testimap dovecot: auth(default): ldap(myuser,10.0.0.20): Unknown user Jan 22 17:21:51 testimap dovecot: auth(default): userdb(myuser,10.0.0.20): user not found from any userdbs Jan 22 17:21:51 testimap dovecot: auth(default): master out: NOTFOUND 1 Jan 22 17:21:51 testimap dovecot: imap-login: Internal login failure (auth failed, 1 attempts): user=<myuser>, method=PLAIN, rip=10.0.0.20, lip=10.0.0.15, TLS any ideas ?

2 1

[Dovecot] config file option to switch off CONDSTORE support?
by Harald Dunkel 22 Jan '10

22 Jan '10

Hi folks, Is there some config file option to switch off CONDSTORE support? Of course I checked the manual on the Wiki, but I haven't seen CONDSTORE mentioned at all. Forgive me if I am too blind to see. Many thanx Harri

2 1

[Dovecot] when does dovecot create a mailbox
by spamvoll＠googlemail.com 22 Jan '10

22 Jan '10

hi.. im using ldap. what happens when i add a new ldap user and that user tryes to login to dovecot ? does dovecot create the mailbox on first login? or do i have to send a mail first ? thx

2 1

[Dovecot] Files Moving From /New to /Cur
by Tony Rutherford 22 Jan '10

22 Jan '10

Using Dovecot 1.2-9 with Maildir and layout=FS. We have our own delivery pushing messages to the /new and then /cur folder eventually. When I have an IMAP client attached, there is apparently some sort of race going on. I believe that Dovecot is moving files from /new to /cur (and renaming them) before our own delivery gets the job done. This is causing a problem for us. Is there a way to disable this in Dovecot? I have the LDA section commented out of the config file..so I don't think that's in play. Bottom line is that I don't want Dovecot to move any files around whether an IMAP client is attached or not (except for handling the IMAP COPY/APPEND). Regards, Tony

2 2

[Dovecot] Seen flag bug in Mozilla Thunderbird - BugID 541337 - "old messages are marked as unread"
by Christian Rohmann 22 Jan '10

22 Jan '10

Just wanted to share the bad news: https://bugzilla.mozilla.org/show_bug.cgi?id=541337 It seems that Dovecot is really showing the Mozilla Thunderbird team how to read and use an RFC ;-) -- Christian Rohmann Content Delivery Server u. Dienste Network Engineering & Design NETCOLOGNE Gesellschaft für Telekommunikation mbH Am Coloneum 9 | 50829 Köln Tel: 0221 2222-5751 | Fax: 0221 2222-75751 http://www.netcologne.de Geschäftsführer: Werner Hanf Dipl.-Ing. Karl-Heinz Zankel HRB 25580, AG Köln

2 1

[Dovecot] Conditionally use a sieve script with deliver?
by Kārlis Repsons 22 Jan '10

22 Jan '10

I found a post in this list [0], which says sieve scripts can be used to deliver mail as read. However, can it be done somehow conditionally, I mean, with a direct or indirect switch for deliver? For a nonexistent example, it would be simply < | deliver -m path/to/maildir -r > or maybe an environment variable could be exported to deliver sieve and checked there? (Still not sure if sieve can replace maildrop in my case, however, using it with dovecot creates various problems with interoperability; but perhaps I can just add those imap4flags like "\\seen" myself to the message with maildrop and avoid mess with sieve at all?) [0] http://www.dovecot.org/list/dovecot/2008-July/032294.html

4 6

[Dovecot] IDLE timing issue - dovecot or fetchmail issue?
by Matt Doran 22 Jan '10

22 Jan '10

Hi guys, Thanks for the great product. We've used dovecot for ages as our internal mail server and it works great! I've recently started using fetchmail 6.3.9 (with IDLE enabled) to download mail from our ISP (Pair networks). The ISP is running Dovecot 1.1.16. I am unable to get the info about the dovecot config at this time. The IDLE support in fetchmail allows us to deliver mail near instantaneously without the need to poll (which is what we did previously using POP3). However I've noticed an issue where if 2 mails are delivered in quick succession fetchmail will only download the first email, and the second will not download. If I then send in another test email this triggers the download of 2 emails (the original that wasn't downloaded and the test email). Now I'm wondering whether the issue lies with Dovecot (e.g. a timing issue), or is it fetchmail that isn't implementing the IDLE/download properly. I've attached the output of a fetchmail session showing this problem in action (I've added some annotations to this file starting with >>>>>). The sequence of events are: * Start fetchmail with IDLE enabled * Send 2 emails in quick succession. * Dovecot notifies of the new message * Fetchmail downloads the message * Fetchmail initiates a new IDLE * Then nothing more is delivered. :( * I then send another email, which triggers the 2 to download. I don't know enough about IMAP to understand whether the problem lies with Dovecot or Fetchmail. Hopefully an IMAP expert will be able to see from the attached IMAP session. Regards, -- Matt Doran PaperCut Software International Pty. Ltd. http://www.papercut.com/ Phone: +61 3 9809 5194 fetchmail: 6.3.9-rc2 querying mail.XXXX.com (protocol IMAP) at Tue 12 Jan 2010 13:17:38 EST: poll started Trying to connect to 216.92.193.84/143...connected. fetchmail: IMAP< * OK Dovecot ready. fetchmail: IMAP> A0001 CAPABILITY fetchmail: IMAP< * CAPABILITY IMAP4rev1 SASL-IR SORT THREAD=REFERENCES MULTIAPPEND UNSELECT LITERAL+ IDLE CHILDREN NAMESPACE LOGIN-REFERRALS UIDPLUS LIST-EXTENDED I18NLEVEL=1 QUOTA STARTTLS AUTH=PLAIN AUTH=LOGIN fetchmail: IMAP< A0001 OK Capability completed. fetchmail: will idle after poll fetchmail: IMAP> A0002 STARTTLS fetchmail: IMAP< A0002 OK Begin TLS negotiation now. <snip TLS stuff> fetchmail: IMAP> A0003 CAPABILITY fetchmail: IMAP< * CAPABILITY IMAP4rev1 SASL-IR SORT THREAD=REFERENCES MULTIAPPEND UNSELECT LITERAL+ IDLE CHILDREN NAMESPACE LOGIN-REFERRALS UIDPLUS LIST-EXTENDED I18NLEVEL=1 QUOTA AUTH=PLAIN AUTH=LOGIN fetchmail: IMAP< A0003 OK Capability completed. fetchmail: will idle after poll fetchmail: mail.XXXX.com: upgrade to TLS succeeded. fetchmail: IMAP> A0004 LOGIN "matt" * fetchmail: IMAP< A0004 OK Logged in. fetchmail: IMAP> A0005 SELECT "INBOX" fetchmail: IMAP< * FLAGS (\Answered \Flagged \Deleted \Seen \Draft Junk NonJunk) fetchmail: IMAP< * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft Junk NonJunk \*)] Flags permitted. fetchmail: IMAP< * 0 EXISTS fetchmail: IMAP< * 0 RECENT fetchmail: IMAP< * OK [UIDVALIDITY 1227629703] UIDs valid fetchmail: IMAP< * OK [UIDNEXT 76875] Predicted next UID fetchmail: IMAP< A0005 OK [READ-WRITE] Select completed. fetchmail: IMAP> A0006 IDLE fetchmail: IMAP< + idling fetchmail: IMAP< * 1 EXISTS fetchmail: IMAP> DONE fetchmail: IMAP< * 1 RECENT fetchmail: IMAP< A0006 OK Idle completed. fetchmail: IMAP> A0007 SEARCH UNSEEN NOT DELETED fetchmail: IMAP< * SEARCH 1 fetchmail: IMAP< A0007 OK Search completed (0.000 secs). 1 message for matt at mail.XXXX.com. fetchmail: IMAP> A0008 FETCH 1 RFC822.SIZE fetchmail: IMAP< * 1 FETCH (RFC822.SIZE 11068) fetchmail: IMAP< A0008 OK Fetch completed. fetchmail: IMAP> A0009 FETCH 1 RFC822.HEADER fetchmail: IMAP< * 1 FETCH (RFC822.HEADER {1651} reading message matt@XXXX.com:1 of 1 (1651 header octets) Trying to connect to 127.0.0.1/25...connected. fetchmail: SMTP< 220 smaug.XXXXX.com ESMTP Exim 4.69 Tue, 12 Jan 2010 13:17:56 +1100 fetchmail: SMTP> EHLO smaug.XXXXX.com fetchmail: SMTP< 250-smaug.XXXXX.com Hello matt at localhost [127.0.0.1] fetchmail: SMTP< 250-SIZE 52428800 fetchmail: SMTP< 250-PIPELINING fetchmail: SMTP< 250 HELP fetchmail: SMTP> MAIL FROM:<test-orders(a)XXXX.com> SIZE=11068 fetchmail: SMTP< 250 OK fetchmail: SMTP> RCPT TO:<matt@localhost> fetchmail: SMTP< 250 Accepted fetchmail: SMTP> DATA fetchmail: SMTP< 354 Enter message, ending with "." on a line by itself # fetchmail: IMAP< ) fetchmail: IMAP< A0009 OK Fetch completed. fetchmail: IMAP> A0010 FETCH 1 BODY.PEEK[TEXT] fetchmail: IMAP< * 1 FETCH (BODY[TEXT] {9417} (9417 body octets)**************************.*************.*************.*************.*************.*************.*************.*************.**************.****** fetchmail: IMAP< ) fetchmail: IMAP< A0010 OK Fetch completed. fetchmail: SMTP>. (EOM) fetchmail: SMTP< 250 OK id=1NUWKS-0004rr-5f flushed fetchmail: IMAP> A0011 STORE 1 +FLAGS (\Seen \Deleted) fetchmail: IMAP< * 1 FETCH (FLAGS (\Deleted \Seen \Recent)) fetchmail: IMAP< * 2 EXISTS fetchmail: IMAP< * 2 RECENT fetchmail: IMAP< A0011 OK Store completed. fetchmail: IMAP> A0012 EXPUNGE fetchmail: IMAP< * 1 EXPUNGE fetchmail: IMAP< * 1 RECENT fetchmail: IMAP< A0012 OK Expunge completed. fetchmail: SMTP> QUIT fetchmail: SMTP< 221 smaug.XXXXX.com closing connection fetchmail: IMAP> A0013 IDLE fetchmail: IMAP< + idling >>>>> At this point only one message was delivered >>>>> >>>>> The following occurred after I sent in another email >>>>> which triggered the IDLE notification and both were downloaded fetchmail: IMAP< * 2 EXISTS fetchmail: IMAP> DONE fetchmail: IMAP< * 2 RECENT fetchmail: IMAP< A0013 OK Idle completed. fetchmail: IMAP> A0014 SEARCH UNSEEN NOT DELETED fetchmail: IMAP< * SEARCH 1 2 fetchmail: IMAP< A0014 OK Search completed (0.000 secs). 2 messages for matt at mail.XXXX.com. fetchmail: IMAP> A0015 FETCH 1:2 RFC822.SIZE fetchmail: IMAP< * 1 FETCH (RFC822.SIZE 14548) fetchmail: IMAP< * 2 FETCH (RFC822.SIZE 1723) fetchmail: IMAP< A0015 OK Fetch completed. fetchmail: IMAP> A0016 FETCH 1 RFC822.HEADER fetchmail: IMAP< * 1 FETCH (RFC822.HEADER {1655} reading message matt@XXXX.com:1 of 2 (1655 header octets) Trying to connect to 127.0.0.1/25...connected. fetchmail: SMTP< 220 smaug.XXXXX.com ESMTP Exim 4.69 Tue, 12 Jan 2010 13:18:27 +1100 fetchmail: SMTP> EHLO smaug.XXXXX.com fetchmail: SMTP< 250-smaug.XXXXX.com Hello matt at localhost [127.0.0.1] fetchmail: SMTP< 250-SIZE 52428800 fetchmail: SMTP< 250-PIPELINING fetchmail: SMTP< 250 HELP fetchmail: SMTP> MAIL FROM:<test-orders(a)XXXX.com> SIZE=14548 fetchmail: SMTP< 250 OK fetchmail: SMTP> RCPT TO:<matt@localhost> fetchmail: SMTP< 250 Accepted fetchmail: SMTP> DATA fetchmail: SMTP< 354 Enter message, ending with "." on a line by itself # fetchmail: IMAP< ) fetchmail: IMAP< A0016 OK Fetch completed. fetchmail: IMAP> A0017 FETCH 1 BODY.PEEK[TEXT] fetchmail: IMAP< * 1 FETCH (BODY[TEXT] {12893} (12893 body octets)*********************************.*************.*************.*************.*************.*************.******************.*****************.**************.*************.*************.*************.*********** fetchmail: IMAP< ) fetchmail: IMAP< A0017 OK Fetch completed. fetchmail: SMTP>. (EOM) fetchmail: SMTP< 250 OK id=1NUWKx-0004sC-MW flushed fetchmail: IMAP> A0018 STORE 1 +FLAGS (\Seen \Deleted) fetchmail: IMAP< * 1 FETCH (FLAGS (\Deleted \Seen \Recent)) fetchmail: IMAP< A0018 OK Store completed. fetchmail: IMAP> A0019 EXPUNGE fetchmail: IMAP< * 1 EXPUNGE fetchmail: IMAP< * 1 RECENT fetchmail: IMAP< A0019 OK Expunge completed. fetchmail: IMAP> A0020 FETCH 1 RFC822.HEADER fetchmail: IMAP< * 1 FETCH (RFC822.HEADER {1603} reading message matt@XXXX.com:2 of 2 (1603 header octets) fetchmail: SMTP> MAIL FROM:<matt.doran(a)XXXX.com> SIZE=1723 fetchmail: SMTP< 250 OK fetchmail: SMTP> RCPT TO:<matt@localhost> fetchmail: SMTP< 250 Accepted fetchmail: SMTP> DATA fetchmail: SMTP< 354 Enter message, ending with "." on a line by itself # fetchmail: IMAP< ) fetchmail: IMAP< A0020 OK Fetch completed. fetchmail: IMAP> A0021 FETCH 1 BODY.PEEK[TEXT] fetchmail: IMAP< * 1 FETCH (BODY[TEXT] {120} (120 body octets)********* fetchmail: IMAP< ) fetchmail: IMAP< A0021 OK Fetch completed. fetchmail: SMTP>. (EOM) fetchmail: SMTP< 250 OK id=1NUWL0-0004sC-0s flushed fetchmail: IMAP> A0022 STORE 1 +FLAGS (\Seen \Deleted) fetchmail: IMAP< * 1 FETCH (FLAGS (\Deleted \Seen \Recent)) fetchmail: IMAP< A0022 OK Store completed. fetchmail: IMAP> A0023 EXPUNGE fetchmail: IMAP< * 1 EXPUNGE fetchmail: IMAP< * 0 RECENT fetchmail: IMAP< A0023 OK Expunge completed. fetchmail: SMTP> QUIT fetchmail: SMTP< 221 smaug.XXXXX.com closing connection fetchmail: IMAP> A0024 IDLE fetchmail: IMAP< + idling

4 6

[Dovecot] IMAP only for some users or via webmail
by Federico Tomasczik 22 Jan '10

22 Jan '10

Hello! First, sorry for my English... I'm a newbie with Dovecot and I have some questions, I'm testing Dovecot 1.1.11 in a virtual machine. I wish in the future, migrate this to a real server. Ok, but i need this: 1) A group of users can use IMAP or POP3. 2) The others, only can use POP3. But, this users can use IMAP only with a webmail (the webmail is in the same server that Dovecot) It is possible? How? Thanks! Federico Ch. Tomasczik

3 2

[Dovecot] 1.2.9 imap crash with backtrace
by Ralf Hildebrandt 21 Jan '10

21 Jan '10

>From the log: Jan 3 20:26:07 postamt dovecot: IMAP(nixxxxx): copy: uid=3526, dest=Deleted Messages, msgid=<DC8A4BE5-41A0-4240-8F07-090E95414F7A(a)charite.de>, size=2726 Jan 3 20:26:07 postamt dovecot: IMAP(nixxxxx): delete: uid=3526, msgid=<DC8A4BE5-41A0-4240-8F07-090E95414F7A(a)charite.de> Jan 3 20:26:11 postamt dovecot: IMAP(nixxxxx): expunge: uid=3526, msgid=<DC8A4BE5-41A0-4240-8F07-090E95414F7A(a)charite.de>, size=2726 Jan 3 20:26:42 postamt dovecot: IMAP(nixxxxx): copy: uid=415, box=Deleted Messages, dest=INBOX, msgid=<d539ffeb1001030758n1acc33c1m1fc67e0f1d227e92(a)mail.gmail.com>, size=3604 Jan 3 20:26:42 postamt dovecot: IMAP(nixxxxx): /home/n/i/nixxxxx/Maildir/dovecot-uidlist: Duplicate file entry at line 1: 1262534293.M822904P8880.postamt.charite.de,S=3604,W=3690:2,RSaf (uid 3528 -> 3531) Jan 3 20:26:42 postamt dovecot: IMAP(nixxxxx): Panic: file maildir-uidlist.c: line 403 (maildir_uidlist_records_array_delete): assertion failed: (pos != NULL) Jan 3 20:26:42 postamt dovecot: IMAP(nixxxxx): Raw backtrace: imap [0x80f1631] -> imap [0x80f16a2] -> imap [0x80f1019] -> imap [0x8088fa6] -> imap(maildir_uidlist_refresh+0x9e9) [0x8089fc9] -> imap [0x8086704] -> imap(maildir_storage_sync_init+0x125) [0x8086be5] -> imap(imap_sync_init+0x54) [0x8070434] -> imap [0x8062aa2] -> imap [0x80a619c] -> imap(io_loop_handle_timeouts+0xe9) [0x80f9959] -> imap(io_loop_handler_run+0x82) [0x80fa222] -> imap(io_loop_run+0x20) [0x80f96f0] -> imap(main+0x5d2) [0x8070f52] -> /lib/i686/cmov/libc.so.6(__libc_start_main+0xe5) [0xb75bcb55] -> imap [0x80602d1] Jan 3 20:26:42 postamt dovecot: IMAP(nixxxxx): delete: uid=415, box=Deleted Messages, msgid=<d539ffeb1001030758n1acc33c1m1fc67e0f1d227e92(a)mail.gmail.com> Jan 3 20:26:42 postamt dovecot: IMAP(nixxxxx): expunge: uid=415, box=Deleted Messages, msgid=<d539ffeb1001030758n1acc33c1m1fc67e0f1d227e92(a)mail.gmail.com>, size=3604 Jan 3 20:26:45 postamt dovecot: IMAP(nixxxxx): Disconnected: Logged out bytes=63917/47203 Jan 3 20:26:45 postamt dovecot: IMAP(nixxxxx): Disconnected: Logged out bytes=360/168380 Jan 3 20:26:45 postamt dovecot: IMAP(nixxxxx): Disconnected: Logged out bytes=670290/672304 GNU gdb (GDB) 7.0-debian Copyright (C) 2009 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "i486-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /usr/local/libexec/dovecot/imap...done. Reading symbols from /lib/i686/cmov/libdl.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libdl-2.10.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/i686/cmov/libdl.so.2 Reading symbols from /lib/i686/cmov/librt.so.1...Reading symbols from /usr/lib/debug/lib/i686/cmov/librt-2.10.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/i686/cmov/librt.so.1 Reading symbols from /lib/i686/cmov/libc.so.6...Reading symbols from /usr/lib/debug/lib/i686/cmov/libc-2.10.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/i686/cmov/libc.so.6 Reading symbols from /lib/ld-linux.so.2...Reading symbols from /usr/lib/debug/lib/ld-2.10.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/ld-linux.so.2 Reading symbols from /lib/i686/cmov/libpthread.so.0...Reading symbols from /usr/lib/debug/lib/i686/cmov/libpthread-2.10.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/i686/cmov/libpthread.so.0 Reading symbols from /usr/local/lib/dovecot/imap/lib10_quota_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib10_quota_plugin.so Reading symbols from /usr/local/lib/dovecot/imap/lib11_imap_quota_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib11_imap_quota_plugin.so Reading symbols from /usr/local/lib/dovecot/imap/lib11_trash_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib11_trash_plugin.so Reading symbols from /usr/local/lib/dovecot/imap/lib20_autocreate_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib20_autocreate_plugin.so Reading symbols from /usr/local/lib/dovecot/imap/lib20_fts_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib20_fts_plugin.so Reading symbols from /usr/local/lib/dovecot/imap/lib20_mail_log_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib20_mail_log_plugin.so Reading symbols from /usr/local/lib/dovecot/imap/lib20_zlib_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib20_zlib_plugin.so Reading symbols from /usr/lib/libz.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libz.so.1 Reading symbols from /lib/libbz2.so.1.0...(no debugging symbols found)...done. Loaded symbols for /lib/libbz2.so.1.0 Reading symbols from /usr/local/lib/dovecot/imap/lib21_fts_squat_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib21_fts_squat_plugin.so Reading symbols from /lib/libgcc_s.so.1...(no debugging symbols found)...done. Loaded symbols for /lib/libgcc_s.so.1 Core was generated by `imap [nixxxxx 87.162.56.10]'. Program terminated with signal 6, Aborted. #0 0xb7708424 in __kernel_vsyscall () #0 0xb7708424 in __kernel_vsyscall () No symbol table info available. #1 0xb75d08e0 in *__GI_raise (sig=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:64 resultvar = <value optimized out> pid = -1217490956 selftid = 25023 #2 0xb75d3e15 in *__GI_abort () at abort.c:88 act = {__sigaction_handler = {sa_handler = 0x9505708, sa_sigaction = 0x9505708}, sa_mask = {__val = {3219827960, 135197034, 3077474016, 0, 3219828080, 3219828068, 128, 0, 0, 3219828144, 3077727856, 134566866, 549, 0, 0, 0, 1, 135270350, 128, 1, 3219828068, 156260072, 69, 3219828196, 3219828040, 135198630, 156260653, 3219828068, 3219828072, 550, 156260104, 3076940867}}, sa_flags = 550, sa_restorer = 0x8106dd9 <write_full+57>} sigs = {__val = {32, 0 <repeats 31 times>}} #3 0x080f1645 in default_fatal_finish (type=<value optimized out>, status=0) at failures.c:160 backtrace = 0x95052d8 "imap [0x80f1631] -> imap [0x80f16a2] -> imap [0x80f1019] -> imap [0x8088fa6] -> imap(maildir_uidlist_refresh+0x9e9) [0x8089fc9] -> imap [0x8086704] -> imap(maildir_storage_sync_init+0x125) [0x8086be5]"... #4 0x080f16a2 in i_internal_fatal_handler (type=LOG_TYPE_PANIC, status=0, fmt=0x8109e2c "file %s: line %d (%s): assertion failed: (%s)", args=0xbfeaae44 ":\355\020\b\223\001") at failures.c:443 No locals. #5 0x080f1019 in i_panic ( format=0x8109e2c "file %s: line %d (%s): assertion failed: (%s)") at failures.c:207 No locals. #6 0x08088fa6 in maildir_uidlist_records_array_delete (uidlist=0x951b0b0, rec=0x9534500) at maildir-uidlist.c:403 recs = 0x9536fa0 __PRETTY_FUNCTION__ = "maildir_uidlist_records_array_delete" #7 0x08089fc9 in maildir_uidlist_next (uidlist=0x951b0b0) at maildir-uidlist.c:544 rec = 0x95346b8 uid = 3531 #8 maildir_uidlist_update_read (uidlist=0x951b0b0) at maildir-uidlist.c:741 storage = 0x950f4b8 orig_uid_validity = 1186140978 fd = 14 orig_next_uid = 3531 input = 0x95347a0 st = {st_dev = 65024, __pad1 = 0, __st_ino = 5228663, st_mode = 33152, st_nlink = 1, st_uid = 50357, st_gid = 100, st_rdev = 0, __pad2 = 0, st_size = 763, st_blksize = 4096, st_blocks = 8, st_atim = { tv_sec = 1262546767, tv_nsec = 269770575}, st_mtim = { tv_sec = 1262546802, tv_nsec = 221806856}, st_ctim = { tv_sec = 1262546802, tv_nsec = 221806856}, st_ino = 5228663} last_read_offset = 693 #9 maildir_uidlist_refresh (uidlist=0x951b0b0) at maildir-uidlist.c:889 i = 0 retry = <value optimized out> ret = <value optimized out> #10 0x08086704 in have_recent_messages (ctx=0x9505210, forced=false, find_uid=0x0, lost_files_r=0xbfeaaffb) at maildir-sync.c:659 hdr = <value optimized out> #11 maildir_sync_get_changes (ctx=0x9505210, forced=false, find_uid=0x0, lost_files_r=0xbfeaaffb) at maildir-sync.c:679 flags = <value optimized out> #12 maildir_sync_context (ctx=0x9505210, forced=false, find_uid=0x0, lost_files_r=0xbfeaaffb) at maildir-sync.c:714 sync_flags = <value optimized out> flags = 135325664 new_changed = <value optimized out> cur_changed = <value optimized out> lock_failure = <value optimized out> fname = 0x9515030 "/home/n/i/nixxxxx/Maildir" ret = <value optimized out> __PRETTY_FUNCTION__ = "maildir_sync_context" #13 0x08086be5 in maildir_storage_sync_init (box=0x9514e98, flags=0) at maildir-sync.c:924 _data_stack_cur_id = 4 ctx = 0x9505210 lost_files = <value optimized out> ret = 0 __PRETTY_FUNCTION__ = "maildir_storage_sync_init" #14 0x08070434 in imap_sync_init (client=0x950fba0, box=0x9514e98, imap_flags=0, flags=0) at imap-sync.c:146 ctx = 0x95191a0 __PRETTY_FUNCTION__ = "imap_sync_init" #15 0x08062aa2 in idle_sync_now (box=<value optimized out>, ctx=0x950feb8) at cmd-idle.c:127 __PRETTY_FUNCTION__ = "idle_sync_now" #16 0x080a619c in notify_delay_callback (ibox=0x9514e98) at index-mailbox-check.c:49 No locals. #17 0x080f9959 in io_loop_handle_timeouts_real (ioloop=0x950d9b0) at ioloop.c:313 item = 0x9563c78 tv = {tv_sec = 0, tv_usec = 0} tv_call = {tv_sec = 1262546802, tv_usec = 336801} t_id = 3 #18 io_loop_handle_timeouts (ioloop=0x950d9b0) at ioloop.c:324 _data_stack_cur_id = 2 #19 0x080fa222 in io_loop_handler_run (ioloop=0x950d9b0) at ioloop-epoll.c:180 ctx = 0x950dab8 event = <value optimized out> list = <value optimized out> io = <value optimized out> tv = {tv_sec = 0, tv_usec = 108829} t_id = <value optimized out> msecs = 109 ret = 0 i = <value optimized out> j = <value optimized out> call = <value optimized out> #20 0x080f96f0 in io_loop_run (ioloop=0x950d9b0) at ioloop.c:335 No locals. #21 0x08070f52 in main (argc=) at main.c:327 No locals. $1 = {prev = 0x0, next = 0x0, client = 0x950fba0, pool = 0x950fe18, tag = 0x950fea8 "104.6", name = 0x950feb0 "IDLE", args = 0x0, cmd_flags = 10, func = 0x80628b0 <cmd_idle_continue>, context = 0x950feb8, module_contexts = {arr = {buffer = 0x950fe70, element_size = 4}, v = 0x950fe70, v_modifiable = 0x950fe70}, parser = 0x9512620, state = CLIENT_COMMAND_STATE_WAIT_INPUT, sync = 0x0, uid = 0, cancel = 0, param_error = 0, search_save_result = 0, temp_executed = 0} (gdb) quit ----- End forwarded message ----- -- Ralf Hildebrandt Geschäftsbereich IT | Abteilung Netzwerk Charité - Universitätsmedizin Berlin Campus Benjamin Franklin Hindenburgdamm 30 | D-12203 Berlin Tel. +49 30 450 570 155 | Fax: +49 30 450 570 962 ralf.hildebrandt(a)charite.de | http://www.charite.de

8 22

[Dovecot] nologin in auth proto version 1.1
by Kirill Miazine 21 Jan '10

21 Jan '10

I notice that the nologin parameter for the AUTH command is gone in version 1.1 of Dovecot Authentication Protocol. nologin was added in 1.1, so that authentication client could indicate that there will be no subsequent master requests to retrieve user info. Could we have nologin back please? Kirill

2 5

[Dovecot] Dovecot & SNMP
by Christoph Petersen 21 Jan '10

21 Jan '10

Hi folks, Today I setup Cacti for my environment and I was wondering if there are some templates/scripts for Cacti or SNMP I could use to gather some statistics from Dovecot. Thanks in advance. BR Chris

1 0

[Dovecot] Fastest restart of dovecot after upgrade: HOW?:
by Ralf Hildebrandt 21 Jan '10

21 Jan '10

I'm running dovecot under runit: #!/bin/sh echo '/var/core/%p' > /proc/sys/kernel/core_pattern ulimit -n 8096 ulimit -c unlimited exec /usr/local/sbin/dovecot -F (that way, together with incron, I can automatically generate the coredumps I'm posting all the time) If I apply a patch and recompile, what is the fastest way of restarting dovecot? Which part of the process structure can be killed and takes all it's children with it? ├─runsvdir─┬─runsv───ntpd │ ├─runsv─┬─dovecot─┬─2*[dovecot-auth] │ │ │ ├─1203*[imap] │ │ │ ├─64*[imap-login] │ │ │ ├─64*[managesieve-log] │ │ │ └─64*[pop3-login] │ │ └─svlogd killall dovecot? Is that guaranteed to wipe out ALL child processes as well? I had to use (at least in the past): sv d /var/service/dovecot killall dovecot killall -9 imap-login ps auxwww|grep dovecot to make sure everything would be dead... -- Ralf Hildebrandt Geschäftsbereich IT | Abteilung Netzwerk Charité - Universitätsmedizin Berlin Campus Benjamin Franklin Hindenburgdamm 30 | D-12203 Berlin Tel. +49 30 450 570 155 | Fax: +49 30 450 570 962 ralf.hildebrandt(a)charite.de | http://www.charite.de

2 2

[Dovecot] Maildir and IMAP keywords
by Per-Erik Persson 21 Jan '10

21 Jan '10

When a user in thunderbird toggles some flags like junk, spam or something similar dovecot appends these flags form a-z to the end of the file in maildir. I have another application that also access the maildirs which gets really upset with these flags and ignore those emails. Are there any other way for dovecot to store these flags to make it compatible with other softwares?

2 1

[Dovecot] ldap and mail_location
by spamvoll＠googlemail.com 21 Jan '10

21 Jan '10

hi.. im running dovecot 1.2.9 and checking against an openldap. i defined in dovecot.conf mail_location = maildir:/mail/%u and now all mails are stored under /mail/my.emal(a)mydomain.com how can i store them in /mail/ldapuid ? these userdb and passdb settings drive me crazy.. looks like ldap is a bigger thing then i thougt :) thx

1 2

[Dovecot] Migration from Courier to dovecot
by Werner Detter 21 Jan '10

21 Jan '10

hi list, I've just registered to the list, so please be tolerant ;) I'm currently in the process of planning the migration from courier to dovecot as POP/IMAP-Server. I'm migration from Courier 0.58 (Debian-Etch-packages) to Dovecot 1.1.13 (Debian Lenny Backport). The conversion of the Mailbox from Courier to Dovecot will be done with "courier-dovecot-migrate.pl"-script[1], which works fine. However after running "courier-dovecot-migrate.pl" the Courier-Files still remain in the Maildir. Can i just delete those Courier-specific-files or does dovecot need them somehow (do you normally get rid of these after conversion)? It's about these files: courierimapacl courierimapsubscribed courierimapuiddb courierpop3dsizelist And those directories: courierimaphieracl courierimaphieracl Can i simply delete those with "find" ? Furthermore: is it possible to convert back from Dovecot-Format to Courier-Format? Thanks in advance, Werner [1] http://www.dovecot.org/tools/courier-dovecot-migrate.pl

4 5

[Dovecot] MUA notifications on new mail in a new folder?
by Kārlis Repsons 20 Jan '10

20 Jan '10

If deliver gets run with a non-root userid like this: < | deliver -m path/to/NEWmaildir >, I wonder, is a connected IMAP MUA automatically notified, that the new message has arrived in the new folder? As I see from some experiments with Thunderbird, it has no problems with immediate notifications of new mail in previously existing folders, however, it has problems with the case of new folder.

2 4

[Dovecot] outlook 2007 can't see public folders more than 1 deep
by Frank Cusack 20 Jan '10

20 Jan '10

dovecot-1.2.9 I have a public folder using ACLs to determine who can access it. namespace public { separator = / prefix = shared/ location = maildir:/var/maildir/shared subscriptions = no } Outlook 2007 can't see any folders except at the top level. It can create them just fine, but can't see them after quit and restart. For example, I can create the folder shared/foo/bar but on restart outlook only sees foo as a folder without subfolders (no + to expand it) and doesn't see bar anymore. In fact I can delete the folder foo in outlook and then BOTH .foo and .foo.bar directories are removed on the server. When you click on foo, the error message in the mail pane is "Cannot display the folder. The folder 'foo' cannot contain items. This is most likely a limitation of your IMAP server. In order to create a folder that can contain items, be sure not to append '/' to its name as you create it." -frank

2 2

[Dovecot] md5_verify(...): Not a valid MD5-CRYPT or PLAIN-MD5 password
by BaQs 20 Jan '10

20 Jan '10

'afternoon list! I use mysql as userdb, which contains two type of password schemes: DES and MD5-CRYPT. I read there : http://wiki.dovecot.org/Authentication/PasswordSchemes that both are supported by dovecot. Unfortunately, dovecot keeps saying: Not a valid MD5-CRYPT or PLAIN-MD5 password when looking for a user with DES encrypted password. Is dovecot able to recognize password scheme, or do I have to do something else ? I can't add {DES} to DES passwords, as this database is used with many other softwares. Thanks a lot for your help Pierre

3 2

[Dovecot] Two different issues with dovecot 1.1.13
by Stuart Rowan 20 Jan '10

20 Jan '10

Hi Timo, I'm using Debian backports.org dovecot-imapd, 1:1.1.13-2~bpo50+1. I've got two different issues, a reoccurring, seemingly harmless one about "Corrupted index cache file" (boring.txt) and one that went bonkers over the least few days (bt.txt) causing much spamming of the logs. I've made bt.txt stop happening by just rm'ing dovecot.index* : find Maildir/ -type f -name 'dovecot.index*' -print0 | xargs -0r rm ... which I realise may not be the most helpful thing to have done from your point of view. Anyway I just wanted to let you know about both of these. If one or both are already known about or already fixed by a later version of Dovecot, great and sorry for the noise! If not, and you want any more information etc., let me know. Many thanks, Stu. dovecot: 2009-07-28 10:23:16 Error: IMAP(strr): Corrupted index cache file /home/local/strr/Maildir/dovecot.index.cache: record continues outside its allocated size dovecot: 2009-07-28 10:23:56 Error: IMAP(strr): Corrupted index cache file /home/local/strr/Maildir/dovecot.index.cache: record continues outside its allocated size dovecot: 2009-07-28 08:05:54 Panic: IMAP(strr): file index-mail-headers.c: line 77 (index_mail_parse_header_finish): assertion failed: ((match[match_idx] & HEADER_MAT CH_FLAG_FOUND) == 0) dovecot: 2009-07-28 08:05:54 Error: IMAP(strr): Raw backtrace: imap [0x48dbf2] -> imap [0x48dc73] -> imap [0x48d346] -> imap(index_mail_parse_header+0x617) [0x4545f7] -> imap [0x483284] -> imap [0x483478] -> imap(i_stream_read+0x2c) [0x491d7c] -> imap(i_stream_read_data+0x46) [0x491f16] -> imap(message_get_body_size+0x108) [0x4885 a8] -> imap [0x4226c3] -> imap(imap_fetch+0x162) [0x420852] -> imap(cmd_fetch+0x23c) [0x41a27c] -> imap [0x41e46c] -> imap [0x41e51d] -> imap [0x41eb25] -> imap(clien t_input+0x63) [0x41efd3] -> imap(io_loop_handler_run+0xcb) [0x49515b] -> imap(io_loop_run+0x18) [0x4945c8] -> imap(main+0x3da) [0x426bea] -> /lib/libc.so.6(__libc_sta rt_main+0xe6) [0x7f0e851941a6] -> imap [0x418859] dovecot: 2009-07-28 08:05:54 Error: child 20007 (imap) killed with signal 6 (core dumps disabled) dovecot: 2009-07-28 08:05:56 Panic: IMAP(strr): file index-mail-headers.c: line 77 (index_mail_parse_header_finish): assertion failed: ((match[match_idx] & HEADER_MAT CH_FLAG_FOUND) == 0) dovecot: 2009-07-28 08:05:56 Error: IMAP(strr): Raw backtrace: imap [0x48dbf2] -> imap [0x48dc73] -> imap [0x48d346] -> imap(index_mail_parse_header+0x617) [0x4545f7] -> imap [0x483284] -> imap [0x483478] -> imap(i_stream_read+0x2c) [0x491d7c] -> imap(i_stream_read_data+0x46) [0x491f16] -> imap(message_get_body_size+0x108) [0x4885 a8] -> imap [0x4226c3] -> imap(imap_fetch+0x162) [0x420852] -> imap(cmd_fetch+0x23c) [0x41a27c] -> imap [0x41e46c] -> imap [0x41e51d] -> imap [0x41eb25] -> imap(clien t_input+0x63) [0x41efd3] -> imap(io_loop_handler_run+0xcb) [0x49515b] -> imap(io_loop_run+0x18) [0x4945c8] -> imap(main+0x3da) [0x426bea] -> /lib/libc.so.6(__libc_sta rt_main+0xe6) [0x7f2edf08b1a6] -> imap [0x418859] dovecot: 2009-07-28 08:05:56 Error: child 20984 (imap) killed with signal 6 (core dumps disabled)

2 5

[Dovecot] Autobuilder packages for Debian stable/i386 now available
by Stephan Bosch 20 Jan '10

20 Jan '10

Hi, A few days back I started the first automated slave builder that produces bleeding edge Debian stable packages for Dovecot v1.2 and v2.0. It uses the source packages already provided by the automated master repository (which builds binary packages for Debian testing), so that the version numbers and content are equal throughout all Debian releases. The repository is available as follows: deb http://xi.rename-it.nl/debian/ stable-auto/dovecot-1.2 main Or, for Dovecot v2.0: deb http://xi.rename-it.nl/debian/ stable-auto/dovecot-2.0 main Read this for more information: http://wiki.dovecot.org/PrebuiltBinaries#Automatically_Built_Packages I hope to add amd64 binary support soon. Regards, Stephan.

1 0

Re: [Dovecot] Oracle SQL driver
by Alexander Bukharov 20 Jan '10

20 Jan '10

> The transaction handling doesn't look correct to me. The sql_update()s > just add the change to a linked list and commit() is then supposed to > run them in one transaction and either everything should succeed or > fail. Your commit appears to ignore errors and just commit everything > that goes through? Also since nothing is actually sent before commit(), > your rollback() shouldn't need to send ROLLBACK. You right. I've corrected the transaction handling mechanism. The only thing I couldn't understand: why rollback() shouldn't need to make real ROLLBACK? In case when whole transaction was failed succeded statements will remain uncommited. Then they will be commited later on next successful transaction. May be ROLLBACK is still needed? > The "VARCHAR sqltext[2048]" seems like an unnecessary restriction on the > query length. Wasn't there a way to do this without the limit? Or in AFAIK there is no possibility to use C types in PREPARE statement. Also Oracle cannot handle unsized VARCHARs. I've increased VARCHAR size to 65535. > test_connection() seems unnecessary. Right you are. > Couldn't driver_oracle_generate_name() be simply: > static unsigned int counter = 0; > return i_strdup_printf("ORACONN_%x", ++counter); =) Right. > driver_oracle_escape_string() really should be escaping the string. I made this function to replace single quote in string with two single quotes. IMHO this should be enough. How do you think? > Kind of annoying that each query needs a cursor, even though nearly all > queries are expected to return only a single row, but I guess that can't > be helped with the current API.. Yes. There are no other ways to work with untyped statements in OCI. But Oracle claims that all these statements shouldn't produce significant performance impact. The new version attached.

2 3

[Dovecot] ManageSieve doe not work
by Mike Werner 20 Jan '10

20 Jan '10

Hi, I use MailScanner 4.74.16 (Ubuntu karmic). I convigured ManageSieve as discribed in http://wiki.dovecot.org/ManageSieve/Configuration. But sieve scripts are not applied to incoming mail. How can I determin what went wrong? -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

2 1

[Dovecot] Dovecot 2.0 beta imap session crash report
by wenjie zheng 20 Jan '10

20 Jan '10

System config: RHEL 5.3, 64 bit Dovecot 2.0 beta (changeset "2882650531e0", 10 days old) installed with lda and lmtp Symptom: IMAP session crashed when I tried to delete a non-exist mailbox, e.g., Trash in my test [root@mail4a LocalIntegrationTest]# telnet localhost 143 * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE AUTH=PLAIN] Dovecot ready. a login testmail4a2(a)dev.p4nt5.com xxxxxx a OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT IDLE CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH QUOTA] Logged in a delete Trash Connection closed by foreign host. Error log: Jan 12 12:33:26 mail4a dovecot: imap(testmail4a2(a)dev.p4nt5.com): maildir++: root=/data/mail/de/dev.p4nt5.com/te/testmail4a2, index=, control=, inbox= Jan 12 12:33:31 mail4a dovecot: imap(testmail4a2(a)dev.p4nt5.com): open() failed with index file (null): Bad address Jan 12 12:33:31 mail4a dovecot: master: service(imap): child 20867 killed with signal 11 (core dumps disabled) How to reproduce: Delete a non-exist mailbox after login Thanks, Wenjie

2 3

Re: [Dovecot] ManageSieve doe not work
by Nick Rosier 20 Jan '10

20 Jan '10

Mike Werner wrote: > Hi, > > I use MailScanner 4.74.16 (Ubuntu karmic). I convigured ManageSieve as > discribed in http://wiki.dovecot.org/ManageSieve/Configuration. But sieve > scripts are not applied to incoming mail. How can I determin what went > wrong? ManageSieve is to manage sieve filters. Your MDA does the filtering. Have you configured Dovecot deliver as your MDA? See: http://wiki.dovecot.org/LDA N.

1 0

Re: [Dovecot] How can I configure dovecot as gmail imap proxy
by Supratik Goswami 20 Jan '10

20 Jan '10

Here the proxy server should authenticate the user. If the user is in the list of authenticated users then dovecot will allow to connect to imap.gmail.com. Consider a scenario where a client tries to read his mailbox from imap.gmail.com:993. Client executes the command "mutt -f imaps://imap.gmail.com", the request is first authenticated at the proxy server. If the request is coming from a valid user, dovecot will allow to connect to imap.gmail.com and fetch mails for that user. Can you please help me with the steps to configure the server. Warm Regards Supratik

2 1

[Dovecot] LDA and POP3/IMAP user_query
by Michael 20 Jan '10

20 Jan '10

How do I get IMAP+POP3 vs. LDA to use different user_query statements? The problem is that the input fields are different. IMAP/POP3 is an email address LDA is a username I have written a long statement to try and cater for both however it still only works 99% of the time, and the remaining 1% fails. The 1% that fails sees the mail being delivered to the wrong mbox. In this particular case the same client owned both mboxes so it was ok, but if this had not been the case things could have gotten real embarrassing. Think of the following: abcwidgets(a)theirdomain.tld mailuser1 mailuser1(a)adomain.tld mailuser2 Now when using the Postfix LDA, email for each address is properly delivered to the specified mbox, however in this case because their is a matching name for the mbox and the email address lefthand content, the compound SQL query returns both results and the LDA will use the first one, which in this case was the wrong one. This is the query used: user_query = \ SELECT mailboxes.username AS user, mailboxes.uid, mailboxes.gid, \ concat('*:storage=',mailquota,'M') AS quota_rule \ FROM mailboxes JOIN accounts ON accounts.username = mailboxes.username \ WHERE ((mailboxes.username = '%n' AND accounts.active='1') || \ (mailboxes.email = '%u' AND mailboxes.active='1' AND accounts.active='1') || \ (mailboxes.email = CONCAT('@','%d') AND mailboxes.active='1' \ AND (SELECT COUNT(email) FROM mailboxes WHERE email='%u') = '0')) which additionally caters for the few catch alls our users have. I think this is a massive oversight in the design of Dovecot to use one query to for 2 separate and distinct processes, that both use different parameters. From what I can tell it seems to assume that a mail system will always use username@domain addresses, and never anything more arbitrary. Has anyone found a way around this? Michael

3 4

[Dovecot] shared namespaces with common prefix prefix
by Frank Cusack 19 Jan '10

19 Jan '10

Can shared/public namespaces' prefixes have a common prefix? :) namespace public { separator = / prefix = zz/shared/ location = maildir:/var/maildir/shared:INDEX=/var/maildir/%n/shared subscriptions = no } # to share other employees mailboxes (term'd or admin access) namespace shared { separator = / prefix = zz/shared/%%u/ location = maildir:/var/maildir/%%n:INDEX=/var/maildir/users/%%u subscriptions = no list = children } Since I added the shared namespace, I can no longer access the public namespace. The folders show up but then trying to access one gets the error that the mailbox doesn't exist. If they can't have a common part of the prefix, is that an IMAP limitation or could dovecot conceivably handle it? -frank

2 4

[Dovecot] Auto Discard Vacation Sieve in a date
by Andrés Yacopino 19 Jan '10

19 Jan '10

I have deploy an environment with pigeon sieve, managesieve, dovecot, squirrelmail and avelsieve plugin. The vacation messages are working fine. I am looking for a method to discard vacation messages in some date, when the user returns. ¿Has somebody looked in this feature? Thanks a lot, -- Andrés Fernando Yacopino Infraestructura - Dpto Sistemas AcaSalud Cooperativa de Prestaciones Médico Asistenciales Limitada Tel: 0341-4208726 ayacopino(a)acasalud.com.ar

2 1

[Dovecot] Auto discard sieve vacation messages
by Andrés Yacopino 19 Jan '10

19 Jan '10

I have deploy an environment with pigeon sieve, managesieve, dovecot, squirrelmail and avelsieve plugin. The vacation messages are working fine. I am looking for a method to discard vacation messages in some date, when the user returns. Has somebody looked in this feature? Thanks a lot, -- Andrés Fernando Yacopino Infraestructura - Dpto Sistemas AcaSalud Cooperativa de Prestaciones Médico Asistenciales Limitada Tel: 0341-4208726 ayacopino(a)acasalud.com.ar

2 1

[Dovecot] Virtual folder, Program terminated with signal 6
by Matthias Rieber 19 Jan '10

19 Jan '10

Hi, I've regularly crashes with a certain virtual folder. Erasing the dovecot-index.* files help just for few hours/days. Here are to backtraces: Core was generated by `imap'. Program terminated with signal 6, Aborted. [New process 25893] #0 0xf7df8556 in raise () from /lib/libc.so.6 #0 0xf7df8556 in raise () from /lib/libc.so.6 No symbol table info available. #1 0xf7df9d78 in abort () from /lib/libc.so.6 No symbol table info available. #2 0x080f2d25 in default_fatal_finish (type=<value optimized out>, status=0) at failures.c:160 backtrace = 0x88ee860 "imap [0x80f2d11] -> imap [0x80f2d92] -> imap [0x80f26e9] -> imap(index_search_result_update_flags+0x295) [0x80b2305] -> /usr/local/lib/dovecot/imap/lib20_virtual_plugin.so [0xf7da937d] -> /usr/local/l"... #3 0x080f2d92 in i_internal_fatal_handler (type=LOG_TYPE_PANIC, status=0, fmt=0x810b88c "file %s: line %d (%s): assertion failed: (%s)", args=0xff8b2ea4 "\\S\021\bW") at failures.c:443 No locals. #4 0x080f26e9 in i_panic (format=0x810b88c "file %s: line %d (%s): assertion failed: (%s)") at failures.c:207 No locals. #5 0x080b2305 in index_search_result_update_flags (result=0x9400cb0, uids=0xff8b3150) at index-search-result.c:87 search_arg = {next = 0x89024c0, type = SEARCH_UIDSET, value = {subargs = 0x0, seqset = {arr = {buffer = 0x88ee4a8, element_size = 8}, v = 0x88ee4a8, v_modifiable = 0x88ee4a8}, str = 0x0, time = 0, size = 0, flags = 0, search_flags = 0, thread_type = MAIL_THREAD_NONE, keywords = 0x0, modseq = 0x0, search_args = 0x0, search_result = 0x0}, context = 0x0, hdr_field_name = 0x0, not = 0, match_always = 0, result = -1} ret = <value optimized out> __PRETTY_FUNCTION__ = "index_search_result_update_flags" #6 0xf7da937d in virtual_sync_backend_boxes (ctx=0x93f6660) at virtual-sync.c:733 _data_stack_cur_id = 4 i = 0 ret = 155151376 #7 0xf7daa25b in virtual_storage_sync_init (box=0xb20e070, flags=65) at virtual-sync.c:1486 sync_ctx = <value optimized out> ret = <value optimized out> #8 0x080b6ab2 in mailbox_sync (box=0x6525, flags=65, status_items=239, status_r=0xff8b3338) at mail-storage.c:593 ctx = <value optimized out> #9 0x080651b8 in cmd_select_full (cmd=0x88fbc88, readonly=false) at cmd-select.c:273 client = (struct client *) 0x88fb9f8 box = (struct mailbox *) 0x0 ctx = (struct imap_select_context *) 0x88fbd28 args = (const struct imap_arg *) 0x88fe508 mailbox = 0x88ee2b8 "obfuscated" ret = <value optimized out> __PRETTY_FUNCTION__ = "cmd_select_full" #10 0x08065919 in cmd_select (cmd=0x88fbc88) at cmd-select.c:389 No locals. #11 0x08067bfc in client_command_input (cmd=0x88fbc88) at client.c:612 client = (struct client *) 0x88fb9f8 command = <value optimized out> __PRETTY_FUNCTION__ = "client_command_input" #12 0x08067c99 in client_command_input (cmd=0x88fbc88) at client.c:661 client = (struct client *) 0x88fb9f8 command = <value optimized out> __PRETTY_FUNCTION__ = "client_command_input" #13 0x08067e0d in client_handle_input (client=0x88fb9f8) at client.c:702 _data_stack_cur_id = 3 ret = false remove_io = <value optimized out> handled_commands = false __PRETTY_FUNCTION__ = "client_handle_input" #14 0x0806876f in client_input (client=0x88fb9f8) at client.c:753 cmd = <value optimized out> output = (struct ostream *) 0x88fbbac bytes = <value optimized out> __PRETTY_FUNCTION__ = "client_input" #15 0x080fbac0 in io_loop_handler_run (ioloop=0x88f61a8) at ioloop-epoll.c:208 ctx = (struct ioloop_handler_context *) 0x88f6c18 event = (const struct epoll_event *) 0x88f6c58 list = (struct io_list *) 0x88fbc30 io = (struct io_file *) 0x88fbc08 tv = {tv_sec = 1, tv_usec = 707102} t_id = 2 msecs = <value optimized out> ret = 1 i = 0 j = 0 call = <value optimized out> #16 0x080faf30 in io_loop_run (ioloop=0x88f61a8) at ioloop.c:335 No locals. #17 0x0807127a in main (argc=) at main.c:327 No locals. Core was generated by `imap'. Program terminated with signal 6, Aborted. [New process 26275] #0 0xf7ea4556 in raise () from /lib/libc.so.6 #0 0xf7ea4556 in raise () from /lib/libc.so.6 No symbol table info available. #1 0xf7ea5d78 in abort () from /lib/libc.so.6 No symbol table info available. #2 0x080f2d25 in default_fatal_finish (type=<value optimized out>, status=0) at failures.c:160 backtrace = 0x88d9860 "imap [0x80f2d11] -> imap [0x80f2d92] -> imap [0x80f26e9] -> imap(index_search_result_update_flags+0x295) [0x80b2305] -> /usr/local/lib/dovecot/imap/lib20_virtual_plugin.so [0xf7e5537d] -> /usr/local/l"... #3 0x080f2d92 in i_internal_fatal_handler (type=LOG_TYPE_PANIC, status=0, fmt=0x810b88c "file %s: line %d (%s): assertion failed: (%s)", args=0xffe03774 "\\S\021\bW") at failures.c:443 No locals. #4 0x080f26e9 in i_panic (format=0x810b88c "file %s: line %d (%s): assertion failed: (%s)") at failures.c:207 No locals. #5 0x080b2305 in index_search_result_update_flags (result=0x9318e10, uids=0xffe03a20) at index-search-result.c:87 search_arg = {next = 0x893dfe8, type = SEARCH_UIDSET, value = {subargs = 0x0, seqset = {arr = {buffer = 0x88d94a8, element_size = 8}, v = 0x88d94a8, v_modifiable = 0x88d94a8}, str = 0x0, time = 0, size = 0, flags = 0, search_flags = 0, thread_type = MAIL_THREAD_NONE, keywords = 0x0, modseq = 0x0, search_args = 0x0, search_result = 0x0}, context = 0x0, hdr_field_name = 0x0, not = 0, match_always = 0, result = -1} ret = <value optimized out> __PRETTY_FUNCTION__ = "index_search_result_update_flags" #6 0xf7e5537d in virtual_sync_backend_boxes (ctx=0x930e9e8) at virtual-sync.c:733 _data_stack_cur_id = 4 i = 0 ret = 154202008 #7 0xf7e5625b in virtual_storage_sync_init (box=0x88ebcf0, flags=65) at virtual-sync.c:1486 sync_ctx = <value optimized out> ret = <value optimized out> #8 0x080b6ab2 in mailbox_sync (box=0x66a3, flags=65, status_items=239, status_r=0xffe03c08) at mail-storage.c:593 ctx = <value optimized out> #9 0x080651b8 in cmd_select_full (cmd=0x88e6c88, readonly=false) at cmd-select.c:273 client = (struct client *) 0x88e69f8 box = (struct mailbox *) 0x0 ctx = (struct imap_select_context *) 0x88e6d28 args = (const struct imap_arg *) 0x88e9508 mailbox = 0x88d92b8 "obfuscated" ret = <value optimized out> __PRETTY_FUNCTION__ = "cmd_select_full" #10 0x08065919 in cmd_select (cmd=0x88e6c88) at cmd-select.c:389 No locals. #11 0x08067bfc in client_command_input (cmd=0x88e6c88) at client.c:612 client = (struct client *) 0x88e69f8 command = <value optimized out> __PRETTY_FUNCTION__ = "client_command_input" #12 0x08067c99 in client_command_input (cmd=0x88e6c88) at client.c:661 client = (struct client *) 0x88e69f8 command = <value optimized out> __PRETTY_FUNCTION__ = "client_command_input" #13 0x08067e0d in client_handle_input (client=0x88e69f8) at client.c:702 _data_stack_cur_id = 3 ret = false remove_io = <value optimized out> handled_commands = false __PRETTY_FUNCTION__ = "client_handle_input" #14 0x0806876f in client_input (client=0x88e69f8) at client.c:753 cmd = <value optimized out> output = (struct ostream *) 0x88e6bac bytes = <value optimized out> __PRETTY_FUNCTION__ = "client_input" #15 0x080fbac0 in io_loop_handler_run (ioloop=0x88e11a8) at ioloop-epoll.c:208 ctx = (struct ioloop_handler_context *) 0x88e1c18 event = (const struct epoll_event *) 0x88e1c58 list = (struct io_list *) 0x88e6c30 io = (struct io_file *) 0x88e6c08 tv = {tv_sec = 1, tv_usec = 627183} t_id = 2 msecs = <value optimized out> ret = 1 i = 0 j = 0 call = <value optimized out> #16 0x080faf30 in io_loop_run (ioloop=0x88e11a8) at ioloop.c:335 No locals. #17 0x0807127a in main (argc=) at main.c:327 No locals. kind regards, Matthias

2 4

[Dovecot] Log the virtual email address and not the local account - dovecot 1.2.2 w/ MySQL
by Bill 19 Jan '10

19 Jan '10

I recently started using dovecot and have it working well but I have one item I haven't been able to find an answer for. I am using MySQL with Dovecot for authentication with my virtual email customers. When the user logs in and checks email a log entry is recorded. Instead of the email address (bob(a)bob.net) being logged it records the local account (vemail101) in the POP3 log. How can I get dovecot to reflect the email address that the customer logged in with instead of the local account? Thx, Bill

2 2

[Dovecot] fts squat non-english search for 2 words
by vuser1＠test123.ru 19 Jan '10

19 Jan '10

Hello, It looks I encoutered a bug or misconfiguration. fts_squat search for subject and body works excellent for English mails. For non-English (in particular, Russian) it works only when query consists of 1 word. Phrases - 2 and more words - always returns nothing. Example: search for "planet" ("планета") returns results, search for "Earth" ("Земля") also returns results, but "planet Earth" ("планета Земля") returns nothing. But there are emails having exact phrase "planet Earth". This problem occurs only for non-English queries, both for search in subject and in email body. I tried web-mail Horde 3.2 and Thunderbird. I turned fts plugin off and it correctly finds phrases with 2 and more russian words! So problem is squat. Is it a bug or known config issue? OS: Debian 5.0, installed as openVZ container inside Ubuntu 8.04. Dovecot: 1.2.4, from backports.org Ext3 filesys dovecot -n -------------- # 1.2.4: /etc/dovecot/dovecot.conf # OS: Linux 2.6.24-24-openvz i686 Debian 5.0.3 simfs log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s ssl_cert_file: /etc/ssl/test123/test123.full.crt ssl_key_file: /etc/ssl/test123/priv/test123.key disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login last_valid_uid: 500 mail_privileged_group: mail mail_location: maildir:/var/mail/%u mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugins(default): quota imap_quota fts fts_squat mail_plugins(imap): quota imap_quota fts fts_squat mail_plugins(pop3): mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 imap_client_workarounds(default): outlook-idle delay-newmail imap_client_workarounds(imap): outlook-idle delay-newmail imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh lda: postmaster_address: postmaster(a)test123.ru hostname: test123.ru sendmail_path: /usr/sbin/sendmail auth_socket_path: /var/run/dovecot/auth-master mail_plugins: quota sieve log_path: info_log_path: auth default: mechanisms: plain login user: nobody passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: passwd userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: prefetch socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: mail master: path: /var/run/dovecot/auth-master mode: 432 user: vmail group: mail plugin: acl: vfile:/etc/dovecot/acls trash: /etc/dovecot/trash.conf fts: squat fts_squat: partial=4 full=20 --------------- (with full=10 problem persists)

2 7

[Dovecot] virtual namespace question
by Josephus 19 Jan '10

19 Jan '10

Hi, I'm wondering if it is possible to create a virtual namespace on a prefix other than "virtual/". My goal is to mix IMAP folders with virtual folders on the same folder level (prefix = ""). mail_location = maildir:/data/mail/%d/%u/ # Virtual namespace private { prefix = separator = / location = virtual:/data/mail/%d/%u/virtual } # Default namespace private { separator = / prefix = inbox = yes } With this configuration the folders show up on the same level, but I'm unable to subscribe to them. When I change the prefix back to "virtual/" it works, but folders are still gruoped under "virtual". Funny thing is, when I use a prefix something like "vfolder/", the root folder is no longer greyed out in my MUA (TB3), and I get a "Mailbox doesn't exist: vfolder" error msg if I click on it. BR, Jos

2 1

[Dovecot] Best way of dealing with Case-Sensitive Issues in Dovecot
by Mario Antonio 19 Jan '10

19 Jan '10

In order to deal with case-sensitive issues, I am thinking to use the variable %L (adding it to my current configs --as suggested before by other users in this list) in the configuration files in this way: In Dovecot.conf: mail_location = maildir:/vmail/%Ld/%Ln/Maildir:INDEX=/indexes/%Ld/%Ln auth default: username_format: %Lu passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: static args: uid=5000 gid=5000 home=/vmail/%Ld/%Ln allow_all_users=yes In dovecot-sql.conf: password_query = select concat(virtual_users.user, '@', virtual_domains.name) AS user, virtual_users.password as password \ from virtual_users LEFT JOIN virtual_domains ON virtual_users.domain_id=virtual_domains.id \ where virtual_users.user='%Ln' and virtual_domains.name='%Ld' and virtual_users.status = 1 and virtual_domains.status = 1; user_query = SELECT 5000 AS uid,5000 AS gid,'/vmail/%Ld/%Ln' as home, \ concat('*:storage= ', virtual_users.quota_kb) AS quota_rule \ from virtual_users LEFT JOIN virtual_domains ON virtual_users.domain_id=virtual_domains.id \ where virtual_users.user='%Ln' and virtual_domains.name='%Ld' Is this the correct way of assuring lowercase use all over the place? Can I use the variable %L in where sql statements? Regards, Mario Antonio

2 1

[Dovecot] expire plugin doesn't find mail location
by Roland Rosenfeld 19 Jan '10

19 Jan '10

Hi! After searching for hours now, I give up and have to ask here. I try to use the expire plugin but it always tries to expire my mails instead of the mails of the user. I read about the "Mail location setting problem (v1.1-v1.2) and configured a "mail" extra field in the userdb, but that doesn't have the effect I want. I have not idea, what I could try out more, so I ask here. My setup is the following: # 1.2.9: /usr/local/dovecot/etc/dovecot.conf # OS: SunOS 5.10 sun4v zfs syslog_facility: local6 protocols: imap pop3 managesieve listen(default): * listen(imap): * listen(pop3): * listen(managesieve): *:2000, *:4190 ssl: no disable_plaintext_auth: no login_dir: /usr/local/dovecot/var/run/dovecot/login login_executable(default): /usr/local/dovecot/libexec/dovecot/imap-login login_executable(imap): /usr/local/dovecot/libexec/dovecot/imap-login login_executable(pop3): /usr/local/dovecot/libexec/dovecot/pop3-login login_executable(managesieve): /usr/local/dovecot/libexec/dovecot/managesieve-login mail_uid: 2001 mail_gid: 2001 mail_location: maildir:/var/mailstore/%2Mn/%n/mail mail_debug: yes mail_executable(default): /usr/local/dovecot/libexec/dovecot/imap mail_executable(imap): /usr/local/dovecot/libexec/dovecot/imap mail_executable(pop3): /usr/local/dovecot/libexec/dovecot/pop3 mail_executable(managesieve): /usr/local/dovecot/libexec/dovecot/managesieve mail_plugins(default): quota imap_quota expire mail_plugins(imap): quota imap_quota expire mail_plugins(pop3): quota expire mail_plugins(managesieve): mail_plugin_dir(default): /usr/local/dovecot/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/dovecot/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/dovecot/lib/dovecot/pop3 mail_plugin_dir(managesieve): /usr/local/dovecot/lib/dovecot/managesieve pop3_uidl_format(default): %08Xu%08Xv pop3_uidl_format(imap): %08Xu%08Xv pop3_uidl_format(pop3): %v.%u pop3_uidl_format(managesieve): %08Xu%08Xv namespace: type: private separator: / inbox: yes list: yes subscriptions: yes lda: postmaster_address: postmaster(a)netcologne.de hostname: mailstore20.netcologne.de mail_plugins: sieve quota expire auth_socket_path: /usr/local/dovecot/var/run/dovecot/auth-master auth default: master_user_separator: * verbose: yes debug: yes passdb: driver: passwd-file args: /usr/local/dovecot/etc/passwd.master pass: yes master: yes passdb: driver: sql args: /usr/local/dovecot/etc/dovecot-sql.conf userdb: driver: prefetch userdb: driver: sql args: /usr/local/dovecot/etc/dovecot-sql.conf socket: type: listen master: path: /usr/local/dovecot/var/run/dovecot/auth-master mode: 384 user: vmail plugin: quota: maildir expire: INBOX 60 Spam 60 Papierkorb 60 Trash 1 expire_dict: proxy::expire dict: expire: mysql:/usr/local/dovecot/etc/dovecot-dict-expire.conf With the following dovecot-sql.conf: driver = mysql connect = host=localhost dbname=cyrus user=cyrus password=XXXX default_pass_scheme = CRYPT password_query = \ SELECT username, password, concat('*:storage=', quota) AS userdb_quota_rule, '/var/mailstore/%2Mn/%n' as userdb_home, 'maildir:/var/mailstore/%2Mn/%n/mail' as userdb_mail \ FROM passwd WHERE username='%n' user_query = \ SELECT concat('*:storage=', quota) AS quota_rule, '/var/mailstore/%2Mn/%n' as home, 'maildir:/var/mailstore/%2Mn/%n/mail' as mail \ FROM passwd WHERE username='%n' And this is dovecot-dict-expire.conf: connect = host=localhost dbname=dovecot user=dovecot password=XXXXXX map { pattern = shared/expire/$user/$mailbox table = expires value_field = expire_stamp fields { username = $user mailbox = $mailbox } } In user test's Trash folder there are mails that are older than 1 day and in dovecot.expires there is +----------+---------+--------------+ | username | mailbox | expire_stamp | +----------+---------+--------------+ | test | Trash | 1262779049 | +----------+---------+--------------+ But if I run /usr/local/dovecot/sbin/dovecot --exec-mail ext /usr/local/dovecot/libexec/dovecot/expire-tool.sh --test I get the following output: Info: Loading modules from directory: /usr/local/dovecot/lib/dovecot/imap Info: Module loaded: /usr/local/dovecot/lib/dovecot/imap/lib10_quota_plugin.so Info: Module loaded: /usr/local/dovecot/lib/dovecot/imap/lib20_expire_plugin.so Info: Quota root: name= backend=maildir args= Info: expire: pattern=INBOX type=expunge secs=5184000 Info: expire: pattern=Spam type=expunge secs=5184000 Info: expire: pattern=Papierkorb type=expunge secs=5184000 Info: expire: pattern=Trash type=expunge secs=86400 Info: auth input: quota_rule=*:storage=10000 Info: auth input: home=/var/mailstore/09/test Info: auth input: mail=maildir:/var/mailstore/09/test/mail Info: Namespace: type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes Info: maildir: data=/var/mailstore/df/rrosenfeld/mail Info: maildir++: root=/var/mailstore/df/rrosenfeld/mail, index=, control=, inbox=/var/mailstore/df/rrosenfeld/mail Info: test/Trash: no messages left Info: test/Spam: stop, expire time in future: Sat Mar 6 12:35:10 2010 As you can see, it uses my username (rrosenfeld) instead of the username "test", whose mailbox should be expired. But while the above it printed to the console I get the following in the logfile: Jan 12 15:33:54 mailstore20 dovecot: [ID 583609 local6.info] dict: mysql: Connected to localhost (dovecot) Jan 12 15:33:54 mailstore20 dovecot: [ID 583609 local6.info] auth(default): master in: USER 1 test service=internal Jan 12 15:33:54 mailstore20 dovecot: [ID 583609 local6.info] auth(default): prefetch(test): passdb didn't return userdb entries, trying the next userdb Jan 12 15:33:54 mailstore20 dovecot: [ID 583609 local6.info] auth-worker(default): sql(test): SELECT concat('*:storage=', quota) AS quota_rule, '/var/mailstore/09/test' as home, 'maildir:/var/mailstore/09/test/mail' as mail FROM passwd WHERE username='test' Jan 12 15:33:54 mailstore20 dovecot: [ID 583609 local6.info] auth-worker(default): mysql: Connected to localhost (cyrus) Jan 12 15:33:54 mailstore20 dovecot: [ID 583609 local6.info] auth(default): master out: USER 1 test quota_rule=*:storage=10000 home=/var/mailstore/09/test mail=maildir:/var/mailstore/09/test/mail As you can see, the auth engine sees the request for the user "test". It also returns the correct home and mail attributes (the above messages were triggered by my expire call!). I tried out to comment out the mail_location from dovecot.conf to make sure that the mail attribute from userdb is used, but this has the effect, that dovecot expire does not know any mail location setting at all and tries some "home" directories and different mail storage formats while my setting mail=maildir:/var/mailstore/09/test/mail from the userdb is completely ignored: Info: Loading modules from directory: /usr/local/dovecot/lib/dovecot/imap Info: Module loaded: /usr/local/dovecot/lib/dovecot/imap/lib10_quota_plugin.so Info: Module loaded: /usr/local/dovecot/lib/dovecot/imap/lib20_expire_plugin.so Info: Quota root: name= backend=maildir args= Info: expire: pattern=INBOX type=expunge secs=5184000 Info: expire: pattern=Spam type=expunge secs=5184000 Info: expire: pattern=Papierkorb type=expunge secs=5184000 Info: expire: pattern=Trash type=expunge secs=86400 Info: auth input: quota_rule=*:storage=10000 Info: auth input: home=/var/mailstore/09/test Info: auth input: mail=maildir:/var/mailstore/09/test/mail Info: Namespace: type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes Info: cydir: mailbox location not given Info: cydir: Couldn't create mail storage : Root mail directory not given Info: dbox: mailbox location not given Info: dbox: Couldn't create mail storage : Root mail directory not given Info: maildir: access(/var/mailstore/09/test/Maildir, rwx): failed: No such file or directory Info: maildir: couldn't find root dir Info: maildir: Couldn't create mail storage : Root mail directory not given Info: mbox: root exists (/var/mailstore/09/test/mail) Info: mbox: INBOX: access(/var/mail/test, rw) failed: No such file or directory Info: mbox: INBOX: access(/var/spool/mail/test, rw) failed: No such file or directory Info: mbox: INBOX defaulted to /var/mailstore/09/test/mail/inbox Info: fs: root=/var/mailstore/09/test/mail, index=, control=, inbox=/var/mailstore/09/test/mail/inbox Info: test/Trash: no messages left Info: test/Spam: stop, expire time in future: Sat Mar 6 12:35:10 2010 As you can see, expire tries to access different (default?) mailbox typies instead of simply using maildir:/var/mailstore/09/test/mail as defined in the userdb. So my main problem seems to be, that the mail attribute from the userdb is completely ignored in expire calls. But how do I fix this? Tschoeeee Roland -- Roland Rosenfeld - Content Delivery - NED - Technik NetCologne Gesellschaft für Telekommunikation mbH - HRB 25580, AG Köln Am Coloneum 9 50829 Köln Tel.: +49-221-2222-373 Fax: +49-221-2222-7373 Geschäftsführer: Werner Hanf, Karl-Heinz Zankel

2 2

[Dovecot] Dovecot-deliver sometimes fails when message set to discard via sieve
by Steve Wagner 19 Jan '10

19 Jan '10

Hi, sometimes mails that i discard via sieve gets delivered to my inbox and i can not figure out why. So i hope you can give me a hint. My setup is: I use a self compiled dovecot 1.2.4 with installed sieve and managesieve plugin. Incoming mails a processed by Postfix and the delivered to Procmail. Procmail invokes Spamassassin and discard all mails marked as spam. The other mails are passed to Dovecot deliver this way: :0 w | /opt/dovecot/libexec/dovecot/deliver For moving mails to subdirectorys this works always, but not for mails that are discard via Sieve. Examples are: if header :contains "List-Id" "git.vger.kernel.org" { if header :contains "Subject" "[ANNOUNCE]" { fileinto "Announce"; stop; } if header :contains "Subject" "[ANN]" { fileinto "Announce"; stop; } if header :contains "Subject" "[PATCH" { discard; stop; } fileinto "Lists.Git"; stop; } or if header :contains "Organization" "web.de" { discard; stop; } This often works, but sometimes it fails. Procmail reports then that deliver reported an error (but not which) and delivers them to my inbox. There are also no message in dovecots or dovecot delivers log file. Dose anybody have an idea? Steve

3 12

[Dovecot] How can I configure dovecot as gmail imap proxy
by Supratik Goswami 19 Jan '10

19 Jan '10

Hi, I want to configure dovecot as gmail imap proxy. If any system in my network wants to connect to imap.gmail.com,993 it has to go through the dovecot proxy. Is it possible to setup such environment with dovecot? If yes, can you please help me to configure my dovecot server. Warm Regards Supratik

3 2

[Dovecot] Update Dovecot index files on maildrop delivery?
by Kārlis Repsons 19 Jan '10

19 Jan '10

Hi all, is there some easy way to inform Dovecot about a new delivery, which has happened after postfix invoked maildrop, so the index files would be updated?

3 5

[Dovecot] Socket permission 432/384 and dovecot.conf
by Seba 19 Jan '10

19 Jan '10

Sorry for that question but: when you set in dovecot.conf this for example: socket listen { client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } } and you run "dovecot -n" you'll see client: path: /var/spool/postfix/private/auth mode: 432 I'm wondering about the mode "432" - how is this value calculated? Same for the auth/master socket socket - the value ist "384" and in dovecot.conf it's 0600. Thanks for any info. Seba

3 2

[Dovecot] Dovecot Proxy and environment variables
by BaQs 19 Jan '10

19 Jan '10

Dear list, First of all, I am French so excuse my bad english. I am currently using dovecot proxy feature, using sql backend. I "proxy" the imap/pop requests to another server, let's say server2. On server2, I use a script to keep up to date a "pop before smtp auth" database. I used mail_executable = /path/to/this/script.sh ... My problem is: the $IP environment variable on server2 is the proxy's IP. How could I give a variable from proxy to server2, or simply get the real client public IP ? Thanks a lot in advance for your answers Pierre. PS: let me also thank very much dovecot developers and community !

3 7

[Dovecot] No filelocking at "shared-mailboxes" dictionary?
by Peer Heinlein 19 Jan '10

19 Jan '10

Using imapsync I changed many ACLs on many accounts simultaneously in four concurrent IMAP-sessions. I started with an empty file "shared-mailboxes". But after the sync the file "shared-mailboxes" has been crashed. I found broken lines and I'm missing some entrys. Is it possible that there's no filelocking on that file? I used the ext3 filesystem. That's what shred-mailboxes looks like at the moment: shared/shared-box 1 shared/shared-boxes/user/user1.example.com/user2.example.com 1 .example.com/user5.example.com 1 hared/shared-boxes/user/user6.example.com/user4.example.c2442203233424^? 1 ser/user7.example.com/user2.example.com Peer dovecot -n: # 1.2.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.27.39-0.2-default x86_64 openSUSE 11.1 (x86_64) protocols: imap imaps managesieve ssl_cert_file: /etc/ssl/old.pem ssl_key_file: /etc/ssl/old.pem shutdown_clients: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login login_process_per_connection: no login_max_processes_count: 512 max_mail_processes: 1024 mail_max_userip_connections(default): 40 mail_max_userip_connections(imap): 40 mail_max_userip_connections(managesieve): 10 verbose_proctitle: yes mail_uid: vmail mail_gid: vmail mail_location: maildir:~/Maildir mail_executable(default): /usr/lib/dovecot/imap-usernamenmigration mail_executable(imap): /usr/lib/dovecot/imap-usernamenmigration mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugins(default): quota imap_quota acl imap_acl mail_plugins(imap): quota imap_quota acl imap_acl mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib64/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib64/dovecot/modules/imap mail_plugin_dir(managesieve): /usr/lib64/dovecot/modules/managesieve namespace: type: private separator: / inbox: yes list: yes subscriptions: yes namespace: type: shared separator: / prefix: zz_SHARED_ACCOUNTS/%%u/ location: maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u list: yes lda: postmaster_address: postmaster(a)iea-dpc.org mail_plugins: quota acl sieve mail_plugin_dir: /usr/lib64/dovecot/modules/lda quota_full_tempfail: yes auth default: mechanisms: plain login digest-md5 cram-md5 verbose: yes debug: yes debug_passwords: yes passdb: driver: passwd-file args: /etc/dovecot/userdb userdb: driver: passwd-file args: /etc/dovecot/userdb userdb: driver: static args: uid=5001 gid=5001 socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 432 user: vmail group: vmail plugin: quota: maildir quota_rule: *:storage=102400 acl: vfile acl_shared_dict: file:/var/lib/dovecot/shared-mailboxes sieve: ~/.dovecot.sieve sieve_dir: ~/sieve -- Heinlein Professional Linux Support GmbH Linux: Akademie - Support - Hosting http://www.heinlein-support.de Tel: 030 / 40 50 51 - 0 Fax: 030 / 40 50 51 - 19 Zwangsangaben lt. §35a GmbHG: HRB 93818 B / Amtsgericht Berlin-Charlottenburg, Geschäftsführer: Peer Heinlein -- Sitz: Berlin

2 1

[Dovecot] Fail to handle . and - in mailaddresses
by Mika 18 Jan '10

18 Jan '10

Hi, I seem to have run into a bug. Dot and dash is allowed chars in mail addresses, so a ...---...@ should work. Filtered out domainname and IP's for security reasons. And yes this works with MDaemon as example. Setup is postfix using Dovecot for deliver. Version: 1.2.9 OS: Linux ADM64 (Ubuntu 8.04LTS) Tried to deliver mail to rfc compliant mail address ...---...@domain. # 1.2.9: /opt/dovecot/etc/dovecot.conf # OS: Linux 2.6.24-25-server i686 Ubuntu 8.04.3 LTS ext3 log_path: /var/log/dovecot protocols: imaps imap listen: 127.0.0.1 ssl_listen: :943 ssl_cert_file: /etc/ssl/certs/secure.crt ssl_key_file: /etc/ssl/private/secure.key login_dir: /opt/dovecot/var/run/dovecot/login login_executable: /opt/dovecot/libexec/dovecot/imap-login mail_gid: 1005 mail_location: maildir:/opt/vmail/%d/%n/Maildir lda: postmaster_address: postmaster(a)domain.com sendmail_path: /usr/sbin/sendmail auth_socket_path: /var/run/dovecot/auth-master log_path: /opt/vmail/dovecot-deliver.log auth default: mechanisms: plain login passdb: driver: pam passdb: driver: sql args: /opt/dovecot/etc/dovecot-sql.conf userdb: driver: passwd userdb: driver: static args: uid=5000 gid=5000 home=/opt/vmail/%d/%n allow_all_users=yes socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail >From Deliver logfile: deliver(...---...(a)domain.com): Jan 14 08:18:24 Info: msgid=<798c378b1001132318y4a027757m37a668f48730e6c(a)mail.gmail.com>: saved mail to INBOX # Does not seem to end up in any of the files in Maildir, new/tmp folders are empty. Maildir/cur# grep ...---...(a)domain.com * Maildir/cur# //Mika

2 2

[Dovecot] sieve: discarding vacation response
by wenjie zheng 18 Jan '10

18 Jan '10

Configuration: RHEL 5.3, Dovecot 2.0 beta1, dovecot-2.0-sieve (1week old) [wenjie@build dovecot2-2.0.beta1]$ telnet mail4a 24 Trying 172.19.1.74... Connected to mail4a.cloud.dev.mlsrvr.com (172.19.1.74). Escape character is '^]'. 220 mail4a Dovecot LMTP ready mail from:<testmail4a50(a)dev.p4nt5.com> 250 2.1.0 OK rcpt to:<testmail4a2(a)dev.p4nt5.com> 250 2.1.5 OK DATA 354 OK From: <testmail4a50(a)dev.p4nt5.com> To: foo Subject: hello Hello there . 250 2.0.0 <testmail4a2(a)dev.p4nt5.com> eMcYKg7gUEt8ewAA0TR52A Saved quit 221 2.0.0 Client quit Connection closed by foreign host. testmail4a2(a)dev.p4nt5.com has a local .dovecot.sieve file, which contains a vacation auto response. #begin require ["fileinto", "body", "vacation"]; vacation :days 1 text: I am away. . ; keep; #end In the log: Jan 15 15:38:07 mail4a dovecot: lmtp(31612, testmail4a2(a)dev.p4nt5.com) eMcYKg7gUEt8ewAA0TR52A: sieve: msgid=unspecified: discarding vacation response for message implicitly delivered to <testmail4a2(a)dev.p4nt5.com> Jan 15 15:38:07 mail4a dovecot: lmtp(31612, testmail4a2(a)dev.p4nt5.com) eMcYKg7gUEt8ewAA0TR52A: sieve: msgid=unspecified: stored mail into mailbox 'INBOX' Thanks, Wenjie

2 2

[Dovecot] Upgrade path questions
by Thomas M Goerger 18 Jan '10

18 Jan '10

Hi, We are currently running Dovecot v1.1.6 on our servers, and are contemplating an upgrade to 1.2, or 2.0 soon. We are wondering how many organizations are still running a 1.1 version of Dovecot, and if anyone has any thoughts on this transition. Have you upgraded from 1.1 to 1.2? What are your experiences with this? Have you upgraded from 1.1 to 2.0 directly? What are your experiences this way? We are also running an environment with both mbox and maildir formats. How many of you are running similarly, or are running solely maildir or mbox? We're just looking to gather information going forward, and anything you might be able to contribute would be very helpful. Thanks! ************************************************************************* * Tom Goerger - Email/Unix System Administrator * * * * University of Minnesota Email: tmg(a)umn.edu * * Operations, Infrastructure and Architecture Phone: 4-5804 * * Internet Services Office: 626J WBOB * * * *************************************************************************

4 3

[Dovecot] Inotify instance limit for user exceeded
by Lampa 18 Jan '10

18 Jan '10

Hello, i saw in my log followed messages: dovecot: 2010-01-18 13:20:54 Warning: IMAP(user1(a)domain1.com): Inotify instance limit for user exceeded, disabling. dovecot: 2010-01-18 13:21:01 Warning: IMAP(user2(a)domain2.com): Inotify instance limit for user exceeded, disabling. dovecot: 2010-01-18 13:21:23 Warning: IMAP(user2(a)domain2.com: Inotify instance limit for user exceeded, disabling. dovecot -c dovecot-domain1.com.conf -n: # 1.0.10: dovecot-domain1.com.conf remax-czech.cz base_dir: /var/run/domain1.com log_path: /var/log/dovecot/domain1.com/dovecot.log info_log_path: /var/log/dovecot/domain1.com/info.log log_timestamp: %F %T protocols: imap imaps pop3 pop3s listen: 127.0.0.1 ssl_cert_file: /usr/local/ssl/mail/domain1.comserver.crt ssl_key_file: /usr/local/ssl/mail/domain1.com/server.key disable_plaintext_auth: no verbose_ssl: yes login_dir: /var/run/dovecot-domain1.com/login login_executable(default): /usr/local/dovecot/bin/dovecot/imap-login login_executable(imap): /usr/local/dovecot/bin/dovecot/imap-login login_executable(pop3): /usr/local/dovecot/bin/dovecot/pop3-login login_max_processes_count: 40 login_max_connections: 42 max_mail_processes: 2000 verbose_proctitle: yes first_valid_uid: 507 last_valid_uid: 507 first_valid_gid: 502 last_valid_gid: 502 fsync_disable: yes mail_executable(default): /usr/local/dovecot/bin/dovecot/imap mail_executable(imap): /usr/local/dovecot/bin/dovecot/imap mail_executable(pop3): /usr/local/dovecot/bin/dovecot/pop3 mail_process_size: 300 mail_plugin_dir(default): /usr/local/dovecot-1.0.10/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/dovecot-1.0.10/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/dovecot-1.0.10/lib/dovecot/pop3 pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv auth default: mechanisms: plain login user: vmail verbose: yes passdb: driver: vpopmail userdb: driver: vpopmail There is about 2500 users on domain1.com, so i should raise max_mail_processes ? -- Lampa

2 1

[Dovecot] unlinking
by David Halik 18 Jan '10

18 Jan '10

Quick question. How important are these? Are the errors recoverable and not a big deal, or are they actually a problem? I see a few of these randomly over the course of the day. Jan 15 10:04:04 gehenna13.rutgers.edu dovecot: IMAP(user): unlink(/rci/nqu/rci/u8/user/dovecot/.such and such maildir/.nfs00000000001e951000002b8d) failed: Device or resource busy Jan 15 10:04:04 gehenna13.rutgers.edu dovecot: IMAP(user): unlink(/rci/nqu/rci/u8/user/dovecot/.such and such maildir/.nfs00000000001e951000002b8d) failed: Device or resource busy Jan 15 10:04:04 gehenna13.rutgers.edu dovecot: IMAP(user): unlink_directory(/rci/nqu/rci/u8/user/dovecot/.such and such maildir) failed: Device or resource busy Jan 15 10:04:04 gehenna13.rutgers.edu dovecot: IMAP(user): unlink_directory(/rci/nqu/rci/u8/user/dovecot/.such and such maildir) failed: Device or resource busy -- ================================ David Halik System Administrator OIT-CSS Rutgers University dhalik(a)jla.rutgers.edu ================================

3 3

[Dovecot] Strange permission problem with Maildir
by tkin1t3asy 18 Jan '10

18 Jan '10

I have this very strange problem with Dovecot spitting out a file permissions error but further testing seems to show it being an inaccurate message. POP3(username): maildir: data ~/Maildir POP3(username): maildir++: root =/home/ssb201/Maildir, index=, control=, inbox=/home/ssb201/Maildir POP3(username): stat(/home/username/Maildir/tmp) failed: Permission denied (euid=500(username) egid=500(username) missing +x perm: /home/username/Maildir) POP3(username): Couldn't open INBOX... as you can see below the permissions are correct: root@host:/home/username# ls -al Maildir/ total 744 drwx------ 8 username username 220 2010-01-13 06:27 . drwxr-xr-x 18 username username 80 2010-01-13 06:14 .. drwx------ 2 username username 108480 2010-01-14 20:56 cur -rw------- 1 username username 65272 2010-01-14 20:56 dovecot.index -rw------- 1 username username 382976 2010-01-14 20:56 dovecot.index.cache -rw------- 1 username username 6836 2010-01-14 20:56 dovecot.index.log -rw------- 1 username username 309472 2010-01-14 20:56 dovecot-uidlist -rw------- 1 username username 8 2010-01-14 20:56 dovecot-uidvalidity -rw------- 1 username username 0 2010-01-14 20:56 dovecot-uidvalidity.4a090e80 drwx------ 2 username username 40 2010-01-14 20:56 new drwx------ 2 username username 40 2010-01-14 20:56 tmp if I rename ~/Maildir to ~/Maildir.orig and let dovecot create a new directory it works fine with no errors. root@host:/home/username# ls -al Maildir total 28 drwx------ 5 username username 220 2010-01-14 21:19 . drwxr-xr-x 19 username username 100 2010-01-14 21:19 .. drwx------ 2 username username 40 2010-01-14 21:19 cur -rw------- 1 username username 16384 2010-01-14 21:19 dovecot.index.cache -rw------- 1 username username 468 2010-01-14 21:19 dovecot.index.log -rw------- 1 username username 70 2010-01-14 21:19 dovecot-uidlist -rw------- 1 username username 8 2010-01-14 21:19 dovecot-uidvalidity -rw------- 1 username username 0 2010-01-14 21:19 dovecot-uidvalidity.4b4f8a6e drwx------ 2 username username 60 2010-01-14 21:19 new drwx------ 2 username username 40 2010-01-14 21:19 tmp If I rename the newly created ~/Maildir to ~/Maildir.new, and rename ~/Maildir.orig to ~/Maildir the original directory works now with no "+x perm" error. This would seem to imply that dovecot is modifying something, somewhere else on the system when it creates the mail directory. What could this be? -- View this message in context: http://old.nabble.com/Strange-permission-problem-with-Maildir-tp27168284p27… Sent from the Dovecot mailing list archive at Nabble.com.

2 1

[Dovecot] how-to use dsync to do a 2 ways replication ?
by Eric Belhomme 18 Jan '10

18 Jan '10

Hi, I want to set-up two dovecot imap servers, with active-active replicated maildirs. The goal is to have a hosted public server on Internet, and a private server on my LAN to speed-up local connections. So I compiled dovecot 2.0 beta 1 in order to use dsync utility... Actually my config is pretty simple as I just want to setup a proof of concept before going ahead in this way : (Both servers are Debian Lenny with excatly the same config) mail0:~# /usr/local/dovecot2/sbin/dovecot -n # 2.0.beta1: /etc/dovecot2/dovecot/dovecot.conf # OS: Linux 2.6.26-2-686 i686 Debian 5.0.3 auth_debug = yes auth_verbose = yes login_trusted_networks = 172.16.64.0/18 mail_location = maildir:%h passdb { args = /etc/dovecot/userpasswd deny = no driver = passwd-file } postmaster_address = postmaster(a)example.com service pop3-login { inet_listener { port = 110 } inet_listener { port = 995 ssl = yes } } service imap-login { inet_listener { port = 143 } inet_listener { port = 993 ssl = yes } } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = prefetch } userdb { args = /etc/dovecot/userpasswd driver = passwd-file } I logged on the first server with an IMAP client then I copied many email through IMAP, then I launched dsync as root : /usr/local/dovecot2/bin/dsync -v mirror 'ssh eole.it.fr.eve /usr/local/dovecot2/bin/dsync' root(a)eole.it.fr.eve's password: dsync-local(root): Error: Can't create mailbox ssh: Mailbox already exists dsync-local(root): Error: Can't create mailbox aptitude: Mailbox already exists dsync-local(root): Error: Can't create mailbox debtags: Mailbox already exists dsync-local(root): Info: debtags: only in source dsync-local(root): Info: aptitude: only in source dsync-local(root): Info: ssh: only in source dsync-local(root): Info: ssh: only in dest dsync-local(root): Info: aptitude: only in dest dsync-local(root): Info: debtags: only in dest dsync-local(root): Error: Mailbox ssh changed its GUID (cdfc9a2d85154e4b47180000b31a5865 -> 541e9f2850234e4b3a2b0000d0cf7273) dsync-local(root): Error: msg iteration failed: Couldn't open mailbox dsync-remote(root): Error: Can't create mailbox debtags: Mailbox already exists dsync-remote(root): Error: Can't create mailbox aptitude: Mailbox already exists dsync-remote(root): Error: Can't create mailbox ssh: Mailbox already exists dsync-remote(root): Error: Mailbox debtags changed its GUID (501e9f2850234e4b3a2b0000d0cf7273 -> d1fc9a2d85154e4b47180000b31a5865) dsync-remote(root): Error: msg iteration failed: Couldn't open mailbox dsync-remote(root): Error: command MSG-LIST failed dsync-local(root): Error: Mailbox ssh changed its GUID (cdfc9a2d85154e4b47180000b31a5865 -> 541e9f2850234e4b3a2b0000d0cf7273) dsync-local(root): Error: Mailbox aptitude changed its GUID (cffc9a2d85154e4b47180000b31a5865 -> 521e9f2850234e4b3a2b0000d0cf7273) dsync-local(root): Error: Mailbox debtags changed its GUID (d1fc9a2d85154e4b47180000b31a5865 -> 501e9f2850234e4b3a2b0000d0cf7273) dsync-local(root): Error: Mailbox ssh changed its GUID (cdfc9a2d85154e4b47180000b31a5865 -> 541e9f2850234e4b3a2b0000d0cf7273) dsync-local(root): Error: Mailbox aptitude changed its GUID (cffc9a2d85154e4b47180000b31a5865 -> 521e9f2850234e4b3a2b0000d0cf7273) dsync-local(root): Error: Mailbox debtags changed its GUID (d1fc9a2d85154e4b47180000b31a5865 -> 501e9f2850234e4b3a2b0000d0cf7273) mail0:~# dsync-remote(root): Error: Mailbox debtags changed its GUID (501e9f2850234e4b3a2b0000d0cf7273 -> d1fc9a2d85154e4b47180000b31a5865) dsync-remote(root): Error: Mailbox aptitude changed its GUID (521e9f2850234e4b3a2b0000d0cf7273 -> cffc9a2d85154e4b47180000b31a5865) dsync-remote(root): Error: Mailbox ssh changed its GUID (541e9f2850234e4b3a2b0000d0cf7273 -> cdfc9a2d85154e4b47180000b31a5865) dsync-remote(root): Error: Mailbox debtags changed its GUID (501e9f2850234e4b3a2b0000d0cf7273 -> d1fc9a2d85154e4b47180000b31a5865) dsync-remote(root): Error: Mailbox aptitude changed its GUID (521e9f2850234e4b3a2b0000d0cf7273 -> cffc9a2d85154e4b47180000b31a5865) dsync-remote(root): Error: Mailbox ssh changed its GUID (541e9f2850234e4b3a2b0000d0cf7273 -> cdfc9a2d85154e4b47180000b31a5865) It seems dsync tries to use my system user database instead of the /etc/dovecot/userpasswd file ! I found dsync doc on the wiki at http://wiki2.dovecot.org/Tools/dsync but this is not really clear for me... So maybe someone can tell me what's wrong ? Regards, -- Eric Belhomme

2 1

[Dovecot] Adding support for a new storage format - plugin?
by Brad Hards 18 Jan '10

18 Jan '10

Hi, I've spent a little bit of time looking at the dovecot source (from the unstable 2.0 development tree), and I think I'm starting to get it together... Background: I'm interested in dovecot to provide IMAP access to an existing database backed server store (http://www.openchange.org for more details). The goal is to provide parallel access using either IMAP or the exchange RPC protocol. If I understand this stuff: * I can potentially provide access to the store using a plugin. It looks like the virtual mailbox plugin is a potential example here. * I may need to also provide an authentication plugin (not sure whether I can just re-use the existing ldap backend - quite possibly a useful option in my scenario) * I probably can't use the existing SQL code, since it uses its own schema. * I may need to provide some locking to ensure things are always in a consistent state for both IMAP and exchange RPC. Comments? Suggestions? Brad

2 1

[Dovecot] listen to imap*s* on multiple ports?
by Frank Cusack 17 Jan '10

17 Jan '10

<http://wiki.dovecot.org/QuestionsAndAnswers#Is_it_possible_to_have_Dovecot_…> is out of date. How can I listen to ssl-wrapped IMAP on multiple ports? I need to listen on both 993 (for some stupid clients I have to support that can't do START TLS) and 80 (to get past L3/L4 firewalls). I'd like to do it in dovecot rather than use nc, ipfilter or whatever. -frank

3 4

[Dovecot] handling filename of compressed messages
by Leonardo Rodrigues 17 Jan '10

17 Jan '10

i'm running dovecot 1.2.9 and, among other things, i have the zlib plugin enabled. A shell script runs once a day to compresses all not still compressed files on the users maildirs. so far so good, it works fine, there's no problem on that. what i think is not happening 100% correctly is the following: 1) user receives a message 2) BEFORE the compress routine runs, filename is: new/1263436052.V6814I43300b4M146002.correio.domain.com.br,S=238207 3) AFTER the compress routine, filename is now: new/1263436052.V6814I43300b4M146002.correio.domain.com.br,S=238207.gz 4) user check his mail .... and now the filename is cur/1263436052.V6814I43300b4M146002.correio.domain.com.br,S=238207.gz:2,S 5) user replies that mail .... and now the filename is cur/1263436052.V6814I43300b4M146002.correio.domain.com.br,S=238207.gz:2,RS i'm aware that dovecot doesnt need the '.gz' extension on the file to recognize that as a gzipped file. Even without the .gz extension, dovecot is correctly reading the file. the '.gz' is not even necessary on the filename and still dovecot can handle it fine. anyway, i would like to suggest dovecot to handle the filename to keep the .gz extension, if that exists. This could help sysadmins to easily identify gzipped files on the maildirs and make anything with them, if that's desired. i would like to see dovecot changing filenames properly and keeping the .gz extension always, for example cur/1263436052.V6814I43300b4M146002.correio.domain.com.br,S=238207:2,S.gz instead of cur/1263436052.V6814I43300b4M146002.correio.domain.com.br,S=238207.gz:2,S cur/1263436052.V6814I43300b4M146002.correio.domain.com.br,S=238207:2,RS.gz instead of cur/1263436052.V6814I43300b4M146002.correio.domain.com.br,S=238207.gz:2,RS -- Atenciosamente / Sincerily, Leonardo Rodrigues Solutti Tecnologia http://www.solutti.com.br Minha armadilha de SPAM, NÃO mandem email gertrudes(a)solutti.com.br My SPAMTRAP, do not email it

6 11

[Dovecot] sieve: failed to save binary
by wenjie zheng 15 Jan '10

15 Jan '10

RHEL 5.3 Dovecot 2.0 beta1 dovecot-sieve (updated 1 week ago, changeset a3eb0b0b2ddf) Jan 15 11:30:06 mail4a dovecot: lmtp(31015, testmail4a2(a)dev.p4nt5.com) sieve: using sieve path for user's script: /data/mail/de/ dev.p4nt5.com/te/testmail4a2/.dovecot.sieve Jan 15 11:30:06 mail4a dovecot: lmtp(31015, testmail4a2(a)dev.p4nt5.com) sieve: executed before user's script(1): /etc/dovecot/dovecot-global-sieve.sieve Jan 15 11:30:06 mail4a dovecot: lmtp(31015, testmail4a2(a)dev.p4nt5.com) afEDDB6mUEsneQAA0TR52A: sieve: failed to save binary: open(/etc/dovecot/dovecot-global-sieve.svbinmail4a.31015.) failed: Permission denied (euid=5000(virtual) egid=5000(virtual) missing +w perm: /etc/dovecot) It seems that Dovecot wants to save it as something specific with a different name. Even running sievec manually does not make it work. Thanks, Wenjie

2 1

[Dovecot] Moving
by Timo Sirainen 15 Jan '10

15 Jan '10

I'm moving back to Finland tomorrow. It's probably going to take a week or so until things settle down and I'm again back to coding.

6 12

[Dovecot] shared namespace bug?
by Patrick Kaiser 14 Jan '10

14 Jan '10

Hi, finally i got shared namespace up and running. But for example if user peter.griffin shares his inbox to another user, the LIST "" "*" output on telnet looks like: a02 LIST "" "*" * LIST (\HasNoChildren) "/" "Trash" * LIST (\HasNoChildren) "/" "INBOX" * LIST (\Noselect) "/" "shared/peter.griffi" * LIST (\HasChildren) "/" "shared/peter.griffin" * LIST (\HasNoChildren) "/" "shared/peter.griffinINBOX" a02 OK List completed. To share the inbox I previously run as logged in user peter.griffin a02 SETACL inbox peter.griffin lwxrk If I look in thunderbird, i can see under "share" two folders: peter.griffi and peter.griffin. Have i made something wrong, or is this a bug? Hope someone can help me. thanks, patrick -- Name : Patrick Kaiser Email : patrick.kaiser(a)argonius.de Phone : +49 (178) 8452388 Website : http://www.argonius.de GPG Key : http://www.argonius.de/key.pub

2 4

[Dovecot] uw-imap compatability hack?
by Simon Annetts 14 Jan '10

14 Jan '10

Hi all Apologies if this question has already been asked before... I'm migrating from a uw-imap setup where the mail folders were in a subdir mail/ in the users' home directories. All of the clients are configured with 'IMAP server directory' set to mail/ (Thunderbird) and it would be difficult to change this on the clients (there are 1000s of them) I want to use maildir and I have converted the original mbox files in ~mail/ to maildir format. So in ~Maildir/ I now have: cur dovecot.index dovecot.index.cache dovecot.index.log dovecot-uidlist .Drafts new .Sent-Items .Spam subscriptions tmp .Trash if I remove the mail/ setting from 'IMAP server directory' in the client, then everything works as expected and all the folders are visible. With this setting in however, only the inbox is visible and attempts to click on another folder, say Trash result in the client error: Mailbox doesn't exist .mail.Trash I've tried various namespace configurations I found in the namespaces wiki example but none seem to work. What I would really like to happen is for dovecot to ignore this setting supplied by the client and not to prepend .mail onto the folders it is looking for. Is there a clever namespace that will do this for me, or some other setting or symlink trickery? Ultimately I want to support clients that might have both mail/ and nothing set in this box. Using dovecot 1.07. kind regards Simon -- This e-mail and any attachment is confidential. If you have received it in error, please delete it from your system, do not use or disclose the information in any way, and notify me immediately. The contents of this message may contain personal views which are not necessarily the views of Ateb Ltd, unless specifically stated. Mae'r e-bost hwn ac unrhyw atodiad sydd ynghlwm wrtho, yn gyfrinachol. Os yw wedi eich cyrraedd mewn camgymeriad dilëwch ef oddi ar eich system. Peidiwch â defnyddio na datgelu'r wybodaeth mewn unrhyw ffordd a rhowch wybod imi ar unwaith os gwelwch yn dda. Gall y neges gynnwys barn bersonol nad yw o anghenraid yn farn Ateb Cyf, oni ddywedir hynny'n benodol. *********************************** Ateb Ltd. Company No. 3769059 VAT No. 736568987 Registered Address: Marteg House, St. Harmon, Rhayader, Powys LD6 5LG T: 01597 870329 M: 07932 014055 ***********************************

2 2

[Dovecot] How to configure dovecot to listen on multiple separate port numbers
by Rick Thomas 14 Jan '10

14 Jan '10

Is there any way to tell dovecot to listen for imap/imaps requests on all interfaces on multiple separate ports? For example, can I do this: protocol imap { listen = *:10143 listen = *:143 ssl_listen = *:10993 ssl_listen = *:993 ... } Thanks! Rick

3 4

[Dovecot] filter sieve
by Mariano La Torre 14 Jan '10

14 Jan '10

Hi there! i installed and configured dovecot with management-sieve and sieve plugin on my server. I'm trying to apply filters to existing mail (not just the incoming one) but it doesn't work... Can i do it?? thanks!!! bye

4 3

[Dovecot] Sieve and ManageSieve for Dovecot v2.0 merged into one repository
by Stephan Bosch 13 Jan '10

13 Jan '10

Hi, I've merged the Mercurial repositories for Sieve and ManageSieve for Dovecot v2.0 into one repository: http://hg.rename-it.nl/dovecot-2.0-pigeonhole This simplifies the build process significantly. It also allows tightly integrating the implementation of the script storage with the main Sieve library, enabling the possibility to implement alternate means of script storage, like for instance a SQL or LDAP database. Building ManageSieve is still optional as outlined in the INSTALL file. The old v2.0 repositories will be archived soon. I'm slowly but surely progressing towards a first Pigeonhole release for Dovecot v2.0. Regards, Stephan

1 0

[Dovecot] using dovecot deliver
by Per Laine 13 Jan '10

13 Jan '10

Hi all! This is my first posting to the list and I really could use some help in getting postfix using dovecot as virtual_transport. I get an error in dovecot-deliver.log that says "Can't connect to auth server at /var/spool/postfix/private/dovecot: Permission denied" Im using postfix as MTA with two virtual domains and virtual users. This is my dovecot -n output: # 1.1.11: /etc/dovecot/dovecot.conf # OS: Linux 2.6.31-17-generic-pae i686 Ubuntu 9.10 ext4 base_dir: /var/run/dovecot/ log_path: /var/log/dovecot info_log_path: /var/log/dovecot.info log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap pop3 imaps pop3s managesieve ssl_cert_file: /etc/ssl/smtpd.crt ssl_key_file: /etc/ssl/smtpd.key disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login valid_chroot_dirs: /var/spool/vmail mail_location: maildir:/home/vmail/%d/%n mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve sieve_storage(default): sieve_storage(imap): sieve_storage(pop3): sieve_storage(managesieve): ~/sieve sieve(default): sieve(imap): sieve(pop3): sieve(managesieve): ~/.dovecot.sieve auth default: mechanisms: plain login verbose: yes passdb: driver: passwd-file args: /etc/dovecot/passwd userdb: driver: passwd-file args: /etc/dovecot/users socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix plugin: sieve: ~/.dovecot.sieve sieve_dir: ~/sieve Kind regards Pelle

3 5

[Dovecot] Re-2: Allow POP3 per Domain
by Hauke Hagedorn 13 Jan '10

13 Jan '10

<snip /> -------- Original Message -------- Subject: Re: [Dovecot] Allow POP3 per Domain (13-Jan-2010 13:24) From: Robert Schetterer <robert(a)schetterer.org> To: hagedorn(a)mediaciety.de > Am 13.01.2010 12:19, schrieb Hauke Hagedorn: > Hi I have pop3 and/or imap allowed per sql > > i.e > > password_query = SELECT username as user, password, \ > 1001 as userdb_uid, \ > 1001 as userdb_gid, \ > "/usr/local/virtual/%u/" AS userdb_home, \ > "maildir:/usr/local/virtual/%u/" AS userdb_mail \ > FROM mailbox WHERE username = '%u' AND active = '1' AND (imap_allowed = > '1' or '%Ls' = 'pop3') > > so you might adapt this to domain and your needs > > -- > Best Regards > > MfG Robert Schetterer > > Germany/Munich/Bavaria Hi Robert, thanks for your quick reply, i'll give that a try. i was so keen on finding a switch in the conf files, that i didn't think about solving that via the database. Actually I just found it in the docs - must have been blind... Best Regards Hauke

1 0

[Dovecot] Allow POP3 per Domain
by Hauke Hagedorn 13 Jan '10

13 Jan '10

Hi List, I wonder, if it is possible to "switch" POP3 on or off for specific domains. Actually I want to disallow POP3-logins for a certain domain, whereas users can still login into a webinterface via IMAP. Curently I use Dovecot 1.1.11 on current Ubuntu 9.10 with a mySQL backend for authentication. With kind regards Hauke

2 1

[Dovecot] problems running dsync
by joakim＠verona.se 13 Jan '10

13 Jan '10

First I had to do "chmod a+rw /var/run/dovecot/auth-userdb" to avoid permission problems. I assume this isnt how I should do it right? Next I get: dsync -u joakim mirror 'ssh exodia dsync -u joakim' Enter passphrase for key '/home/joakim/.ssh/id_dsa': dsync-local(joakim): Error: Log synchronization error at seq=186,offset=29436 for /home/joakim/Maildir/dovecot.index: uid_validity updated unexpectedly: 1202385824 -> 1262587228 dsync-local(joakim): Warning: fscking index file /home/joakim/Maildir/dovecot.index dsync-remote(joakim): Error: Log synchronization error at seq=2,offset=248 for /home/joakim/Maildir/dovecot.index: uid_validity updated unexpectedly: 1262587228 -> 1202385824 dsync-remote(joakim): Warning: fscking index file /home/joakim/Maildir/dovecot.index dsync-remote(joakim): Error: Mailbox INBOX changed its GUID (f36455205c8d414b11450000326eb77d -> fd3cc81453ed4c4bbc0e00007441ab87) dsync-remote(joakim): Error: msg iteration failed: Couldn't open mailbox dsync-remote(joakim): Error: command MSG-LIST failed dsync-local(joakim): Error: Mailbox INBOX changed its GUID (fd3cc81453ed4c4bbc0e00007441ab87 -> f36455205c8d414b11450000326eb77d) dsync-local(joakim): Error: msg iteration failed: Couldn't open mailbox dsync-local(joakim): Error: Mailbox INBOX changed its GUID (fd3cc81453ed4c4bbc0e00007441ab87 -> f36455205c8d414b11450000326eb77d) dsync-remote(joakim): Error: Mailbox INBOX changed its GUID (f36455205c8d414b11450000326eb77d -> fd3cc81453ed4c4bbc0e00007441ab87) dsync-local(joakim): Error: Mailbox INBOX changed its GUID (fd3cc81453ed4c4bbc0e00007441ab87 -> f36455205c8d414b11450000326eb77d) dsync-remote(joakim): Error: Mailbox INBOX changed its GUID (f36455205c8d414b11450000326eb77d -> fd3cc81453ed4c4bbc0e00007441ab87) [root@localhost etc]# dsync-remote(joakim): Error: read() from proxy client failed: EOF The local end has lots of mailboxes I want to push to the remote end. The remote has an empty INBOX that was automatically created. Also, neither end are doing anything with the mailboxes when I run dsync. -- Joakim Verona

1 0

Re: [Dovecot] Sieve > Pigeonhole > external storage with LDAP or other data source available to dovecot
by Martin F. Foster 13 Jan '10

13 Jan '10

got it, I have extdata working fine now for simple commands like redirect. vacation doesn't seem to be working properly - in that a message is not returned to the sender. I'll continue to test this with and without extdata and report back if I still can't get this to work by the end of my day (~18:00 @ UTC+11) I have also updated the wiki with sieve plugin testing information http://wiki.dovecot.org/LDA/Sieve/Dovecot "Script Compling with Sieve Plugins" Cheers, -Martin Foster Stephan Bosch wrote : > Martin F. Foster wrote: >> oh wow - ignore my last message about sievec& environment. As the >> output says, it's just a warning... it is not blocking the compilation >> of the sieve script as I originally thought. >> >> <compile script> >> # /usr/local/bin/sievec -P sieve_extdata >> /usr/local/etc/dovecot/sieve/before.sv >> /usr/local/etc/dovecot/sieve/before.sieve >> Warning: sieve: extdata: no dict uri specified, extension is >> unconfigured (sieve_extdata_dict_uri is not set). >> >> # echo $? >> 0 >> </compile script> >> > This will compile the before.sv into a binary before.sieve, which is > wrong. First of all, Pigeonhole expects scripts to have the .sieve > extension. Second, binaries are expected to have the .svbin extension. > The errors you get are caused by the deliver plugin's attempts at > compiling a binary (since the .sieve is the binary and a .svbin file > does not exist) :) > > Regards, > > Stephan. > >

1 0

[Dovecot] Dovecot(MYSQL)/Lda/Postfix/Postfixadmin and Quota limit per user
by leo 13 Jan '10

13 Jan '10

================== DOVECOT.CONF ===================== # 1.2.8: /usr/local/etc/dovecot.conf # OS: FreeBSD 8.0-STABLE i386 ufs log_path: /var/log/dovecot-error.log info_log_path: /var/log/dovecot.log protocols: imap imaps pop3 pop3s ssl_cert_file: /etc/ssl/dovecot/cert.pem ssl_key_file: /etc/ssl/dovecot/key.pem disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_user: postfix login_greeting: Server ready. login_processes_count: 4 verbose_proctitle: yes first_valid_uid: 6000 last_valid_uid: 6000 first_valid_gid: 6000 last_valid_gid: 6000 mail_privileged_group: mail mail_location: maildir:/home/vmail/%d/%n/Maildir mail_debug: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): pop3_uidl_format(default): %08Xu%08Xv pop3_uidl_format(imap): %08Xu%08Xv pop3_uidl_format(pop3): %08Xu%08Xu pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh lda: postmaster_address: postmaster(a)example.com log_path: /var/log/dovecot-deliver.log info_log_path: /var/log/dovecot-deliver.log mail_plugins: quota mail_plugin_dir: /usr/local/lib/dovecot/lda quota_full_tempfail: yes deliver_log_format: msgid=%m: %$ sendmail_path: /usr/sbin/sendmail rejection_reason: Twoja wiadomosc do <%t> zostala automatycznie odrzucona:%n%r auth_socket_path: /var/run/dovecot/auth-master auth default: mechanisms: plain login user: nobody username_format: %Lu verbose: yes debug: yes passdb: driver: sql args: /usr/local/etc/dovecot-sql.conf userdb: driver: static args: uid=6000 gid=6000 home=/home/vmail/%d/%n allow_all_users=yes userdb: driver: sql args: /usr/local/etc/dovecot-sql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 432 user: vmailer group: vmailer plugin: quota: maildir:User quota quota_rule: *:storage=4M convert_mail: mbox:%h/mboxmail dict: quotadict: mysql:/usr/local/etc/dovecot-dict-quota.conf ====================== DOVECOT-SQL.CONF ================= driver = mysql connect = host=localhost dbname=xxx user=xxx password=xxx default_pass_scheme = MD5 user_query = SELECT '/home/vmail/%d/%n' as home, 'maildir:/home/vmail/%d/%n' as mail, 6000 AS uid, 6000 AS gid, concat('*:bytes=', mailbox.quota) AS quota_rule FROM mailbox WHERE mailbox.username = '%u' AND active = '1' password_query = SELECT password, '/home/vmail/%d/%n' as home, 'maildir:/home/vmail/%d/%n' as mail, 6000 AS uid, 6000 AS gid, concat('dict:bytes=', quota) AS quota_rule FROM mailbox WHERE username = '%u' AND active = '1' =================== DOVECOT.LOG AND DELIVER LOG============================= [root@frodo /usr/local/etc]# tail -f /var/log/dovecot.log Jan 06 15:07:38 auth(default): Info: new auth connection: pid=44519 Jan 06 15:07:38 auth(default): Info: master in: USER 1 round(a)example.com service=deliver Jan 06 15:07:38 auth(default): Info: master out: USER 1 round(a)example.com uid=6000 gid=6000 home=/home/vmail/example.com/round [root@frodo /usr/local/etc]# tail -f /var/log/dovecot-deliver.log Jan 06 15:07:38 deliver(round(a)example.com): Info: Module loaded: /usr/local/lib/dovecot/lda/lib10_quota_plugin.so Jan 06 15:07:38 deliver(round(a)example.com): Info: auth input: uid=6000 Jan 06 15:07:38 deliver(round(a)example.com): Info: auth input: gid=6000 Jan 06 15:07:38 deliver(round(a)example.com): Info: auth input: home=/home/vmail/example.com/round Jan 06 15:07:38 deliver(round(a)example.com): Info: Quota root: name=User quota backend=maildir args= Jan 06 15:07:38 deliver(round(a)example.com): Info: Quota rule: root=User quota mailbox=* bytes=4194304 messages=0 Jan 06 15:07:38 deliver(round(a)example.com): Info: maildir: data=/home/vmail/example.com/round/Maildir Jan 06 15:07:38 deliver(round(a)example.com): Info: maildir++: root=/home/vmail/example.com/round/Maildir, index=, control=, inbox=/home/vmail/example.com/round/Maildir Jan 06 15:07:38 deliver(round(a)example.com): Info: Namespace : Using permissions from /home/vmail/example.com/round/Maildir: mode=0700 gid=-1 Jan 06 15:07:39 deliver(round(a)example.com): Info: msgid=<4B44987D.9020903(a)gmail.com>: saved mail to INBOX =================== SQL TABLE ================================= +---------------------------+------------------------------------+------+----------------------------+-----------+------------+----------------+---------------------+----- | username | password | name | maildir | quota | local_part | domain | created | modified | active | +---------------------------+------------------------------------+------+----------------------------+-----------+------------+----------------+--------------------- | round(a)example.com | 1 | xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx | | example.com/round/ | 3072000 | round | example.com | 2010-01-06 11:01:26 | +-------+ ========================= DOVECOT restart ===================== Stopping dovecot. Starting dovecot. ILoading modules from directory: /usr/local/lib/dovecot/imap IModule loaded: /usr/local/lib/dovecot/imap/lib10_quota_plugin.so IModule loaded: /usr/local/lib/dovecot/imap/lib11_imap_quota_plugin.so IEffective uid=65534, gid=65534, home=/tmp IQuota root: name=User quota backend=maildir args= IQuota rule: root=User quota mailbox=* bytes=4194304 messages=0 ================================= END ========================================= Hey, at first happy new year. Above you can see my configuration. The problem is to set up quota limit per user using limits from mysql. What I understood from wiki-doc my quota_rule from mysql query should override default quota rule - "quota_rule: *:storage=4M", but it aint happen. Question is what I did wrong ? :D P.S. There is no possibility that something wrong is with database, cause earlier I have been testing quotadict and dovecot updated my quota fields (bytes/messages) in another table. Best regards and thx for any info

3 2

[Dovecot] Discard duplicate messages at delivery?
by Nicolas KOWALSKI 12 Jan '10

12 Jan '10

Hello, I am using dovecot 1.2.9, and the sieve plugin for filtering incoming messages into specific folders. The MTA is postfix, and deliver is called using the "mailbox_command = /usr/lib/dovecot/deliver" directive. Is it possible to make dovecot's deliver discard duplicate messages? With cyrus there is a duplicatesuppression directive which works well (http://cyrusimap.web.cmu.edu/imapd/overview.html#duplicate) With procmail, this can be done with the following recipe, but I did not found an equivalent for dovecot: # One often receives duplicate messages for cross-postings to mailing # lists, or explicit replies to a post from you in addition to the # mailing list message. # # The following recipe eliminates all duplicate messages. It tells # formail(1) to keep a cache file of the Message-IDs of the most # recent messages you've received. Since Message-IDs are guaranteed # unique for distinct messages, they are ideally suited to weed out # duplicates. # :0 Wh: msgid.lock | formail -D 65536 .saves.msgid Thanks, -- Nicolas

2 2

[Dovecot] Silent migration from mbox to maildir?
by Götz Reinicke - IT-Koordinator 12 Jan '10

12 Jan '10

Hi, after migrating to a new hardware (which is soo soooo mutch faster than the old one) I start to think about migrating from mbox to maildir. I'v read some docs and wikies and some questions are unanswered or maybe I skip the answers: - Is it possible to migrate the mboxes "silent" e.g. if a user logs in the mbox is converted? - regarding the Namespaces wiki article, it is possible to mix mbox and Maildir for one user. Is it possible to use this setup for all newly created accounts? or - Is it possible to have maildir set up for all newly created accounts while the old accounts still use mbox? Thanks for any suggestion and best regards, Götz -- Götz Reinicke IT-Koordinator Tel. +49 7141 969 420 Fax +49 7141 969 55 420 E-Mail goetz.reinicke(a)filmakademie.de Filmakademie Baden-Württemberg GmbH Akademiehof 10 71638 Ludwigsburg www.filmakademie.de Eintragung Amtsgericht Stuttgart HRB 205016 Vorsitzende des Aufsichtsrats: Prof. Dr. Claudia Hübner Staatsrätin für Demographischen Wandel und für Senioren im Staatsministerium Geschäftsführer: Prof. Thomas Schadt

3 2

[Dovecot] Dovecot Quota Problem
by Ken Price 12 Jan '10

12 Jan '10

I'm using Dovecot LDA with Exim. I'm also using Dictionary Quotas in a MySQL database. I want to avoid backscatter completely, so I set "quota_full_tempfail = yes" and handle quota checking in the Exim RCPT ACL during the SMTP session. The problem lies in the case where a user's account is nearly full. Smaller messages will continue to come through, but a larger message would get queued for retry since it will push the account over quota. I need Dovecot's quota to exhibit the same behavior as Exim's "quota_is_inclusive=false". >From Exim docs: quota_is_inclusive=false When this is done, the check for exceeding the quota does not include the current message. Thus, deliveries continue until the quota has been exceeded; thereafter, no futher messages are delivered. Any ideas on how I can implement this inside of Dovecot? Thanks, -Ken Price

2 2

[Dovecot] Problem in LSUB?
by Sergio Villar Senin 12 Jan '10

12 Jan '10

Hi guys, I'm not 100% sure about the dovecot version in the server because I don't have access to it, just an account, but I think it's 1.1-rc4 I'm an email client developer and I have a doubt about the behaviour of LSUB that I think it's buggy. See this chat with the server 40 LIST "" INBOX * LIST (\HasChildren) "." "INBOX" 40 OK List completed. 41 LIST "" INBOX* * LIST (\HasChildren) "." "INBOX" * LIST (\HasNoChildren) "." "INBOX.Trash" * LIST (\HasChildren) "." "INBOX.folder1" * LIST (\HasNoChildren) "." "INBOX.folder1.folder12" * LIST (\HasNoChildren) "." "INBOX.folder2" * LIST (\HasNoChildren) "." "INBOX.Sent" * LIST (\HasNoChildren) "." "INBOX.Drafts" * LIST (\HasNoChildren) "." "INBOX.Spam" * LIST (\HasNoChildren) "." "INBOX.buggybox" 41 OK List completed. 42 LSUB "" INBOX 42 OK Lsub completed. 43 LSUB "" INBOX* * LSUB () "." "INBOX" * LSUB () "." "INBOX.Trash" * LSUB () "." "INBOX.folder1" * LSUB () "." "INBOX.folder1.folder12" * LSUB () "." "INBOX.folder2" * LSUB () "." "INBOX.Sent" * LSUB () "." "INBOX.Spam" * LSUB () "." "INBOX.buggybox" * LSUB () "." "INBOX.Drafts" 43 OK Lsub completed. My question is, why "LSUB "" INBOX" does not return anything while "LSUB "" INBOX*" does ? Br

2 1

[Dovecot] Dovecot (IMAP) Hangs sometimes
by Mario Gomide 12 Jan '10

12 Jan '10

Hi there! I'm using Dovecot 1.0.7 in RHEL 5.4 64bits as a IMAP/POP3 server. Dovecot authenticates users against an AD server via kerberos (pam configuration) and clients connect to it via IMAPs and POP3s with SSL. Webmail is in localhost and connects locally also with SSL. All is fine and people use the email server normally and with no problems. But, I have noticed that dovecot hangs sometimes. Usually twice a day somewhere between 09:40 and 10:00 a.m and in the afternoon at about 3:00 p.m. The problem starts when webmail takes long to authenticate and show folders and stuff. After a while it times out and doesn't connect. Then the clients (e.g. outlook, thunderbird) start taking long to connect and then they timeout. Important: Only IMAP connections timeout! POP3 continues ok. This latency keeps on going until dovecot finally hangs (after about 10 to 15 minutes). The problem is solved when I restart/reload dovecot. I'm not sure as to what's going on! I check the log, but it has been hard to pinpoint an exact event or to detect when the problem begins. Any ideas? BTW: what's the real difference between reload and restart? Thanks a lot! Mario

5 13

Re: [Dovecot] Sieve > Pigeonhole > external storage with LDAP or other data source available to dovecot
by Martin F. Foster 12 Jan '10

12 Jan '10

Le 09-Jan-10 20:29, Stephan Bosch a écrit : > > I thought this would be an excellent opportunity to test the new > Pigeonhole plugin support and also to do something interesting with the > namespace functionality of the variables extension. That is why I gave > this a short look, which promptly resulted in a preliminary implementation. > > If you want to play around with it, you can download it from: > > http://hg.rename-it.nl/pigeonhole-sieve-extdata/ > > It will compile and run with both Pigeonhole for Dovecot v1.2 and > Pigeonhole for Dovecot v2.0, but only with the tip Mercurial revisions > (since only those have plugin support). Thanks Stephan, I have the extdata plugin compiled, and am now trying to make a global sieve script to test it. I'm running into problems when using sievec to compile the script - I'm not getting the plugin's variables that are provided in dovecot.conf's plugin {}. I added a few sieve_sys_warning messages to track the calls to sieve_setting_get() <output> /usr/local/bin/sievec -d -P sieve_extdata /usr/local/etc/dovecot/sieve/before.sv Warning: sieve: sieve_setting_get: req: 'sieve_max_script_size' res: '(null)' Warning: sieve: sieve_setting_get: req: 'sieve_max_actions' res: '(null)' Warning: sieve: sieve_setting_get: req: 'sieve_max_redirects' res: '(null)' Warning: sieve: sieve_setting_get: req: 'sieve_subaddress_sep' res: '(null)' Warning: sieve: sieve_setting_get: req: 'recipient_delimiter' res: '(null)' Warning: sieve: sieve_setting_get: req: 'sieve_plugin_dir' res: '(null)' Warning: sieve: sieve_setting_get: req: 'sieve_plugins' res: '(null)' Warning: sieve: sieve_setting_get: req: 'sieve_extdata_dict_uri' res: '(null)' Warning: sieve: extdata: no dict uri specified, extension is unconfigured (sieve_extdata_dict_uri is not set). * Required extensions: 0: vacation (9) 1: variables (17) 2: vnd.dovecot.extdata (29) * Main program (block: 1): 00000000: EXTENSIONS [3]: 00000001: vacation 00000002: variables 00000003: SCOPE [0] (end: 00000008) 00000008: vnd.dovecot.extdata 00000009: VACATION 0000000a: (source line: 3) 0000000d: subject: VAR ${extdata.vacation_subject} 00000023: reason: VAR ${extdata.vacation_message} 00000038: handle: STR[77] "${extdata.vacation_message}${extdata.vacation_subject}<default-from><NO-MIME>" 00000088: [End of code] </output> I'm new to dovecot's internals, it looks like it just needs some environment variables provided, but I'm puzzled as to how this is to be done. I've traced it through sievec.c -> sieve_tool_sieve_env -> sieve_tool_get_setting -> getenv() call. More info: 1. I've traced the process, there's no attempt to open or stat any dovecot.conf 2. using tip dovecot-1.2, dovecot-1.2-sieve, pigeonhole-sieve-extdata. I pulled+updated & rebuilt and confirmed the above behaviour just prior to sending this message. 3. The test scripts run because the test framework uses the test_config mechanism to provide sieve_extdata_dict_uri. Any hints on how to get the dovecot.conf data to sievec? Thanks, -Martin Foster

2 3

Re: [Dovecot] Moving
by Stewart Dean 11 Jan '10

11 Jan '10

My apologies for posting this to the list; I meant to send it Timo only.... > Now that you're back in your native land. ..... > If and only if you're interested, I'D be interested in hearing what > you thought of America -- ==== Once upon a time, the Internet was a friendly, neighbors-helping-neighbors small town, and no one locked their doors. Now it's like an apartment in Bed-Stuy: you need three heavy duty pick-proof locks, one of those braces that goes from the lock to the floor, and bars on the windows.... ==== Stewart Dean, Unix System Admin, Bard College, New York 12504 sdean(a)bard.edu voice: 845-758-7475, fax: 845-758-7035

2 1

[Dovecot] Same filenames on different servers?
by Alexander Chekalin 11 Jan '10

11 Jan '10

Hi, I'm really fuzzy about some problem on how Dovecot used to name files to store messages in Maildir. I have two identical servers (let's call them "First" and "Second"), and have Dovecot and Exim set up on both of them (Maildirs are used to store messages and boxes). First server is the server to be used by people around, and the Second server is backup one, the only thing it can do while the First is alive is to get (via rsync) First's mail spool. I set up rsync to run every 5 minutes, and that's quite well sync spools from First to Second. So if something wrong happens to First server we simple disconnect it from the network and put Second server in place of First. The problem is that files in Maildirs on First server are named like that: 1262610335.H798006P5447.first.domain.my,S=1962:2, 1262610402.H529761P5596.first.domain.my,S=2975:2, 1262610410.H787724P5657.first.domain.my,S=75691:2, ... and the files on Second server should be named like 1262610335.H798006P5447.second.domain.my,S=1962:2, 1262610402.H529761P5596.second.domain.my,S=2975:2, 1262610410.H787724P5657.second.domain.my,S=75691:2, ... As soon as I enter the Second's mailbox with IMAP client Dovecot used to rename files the way they should be. If after that I rsync spools I'll end up with double sized spool as there'll be both First and Second files: 1262610335.H798006P5447.first.domain.my,S=1962:2, 1262610335.H798006P5447.second.domain.my,S=1962:2, 1262610402.H529761P5596.first.domain.my,S=2975:2, 1262610402.H529761P5596.second.domain.my,S=2975:2, ... Long description for simple problem, yes :) I also tried to set: maildir_copy_preserve_filename = yes but still no luck. My setup is FreeBSD 7.2 with all versions in 1.1.x and 1.2.x branches (now it is 1.2.8). Thank you in advance for you advice, yours, Alexander

8 19

[Dovecot] sieve 0.1.14: vacation encodes Subject twice
by Roland Rosenfeld 11 Jan '10

11 Jan '10

Hi! I noticed the following problem in dovecot-1.2-sieve-0.1.14: The following vacation causes trouble with the Subject line: if not exists ["List-Id", "List-Post"] { vacation :days 7 :addresses ["test(a)netcologne.de"] :subject "=?utf-8?b?w4TDlsOc?= sadasd" "Bin gerade nicht hier."; } As you can see, the Subject is already MIME encoded according to RFC2047. Starting with sieve 0.1.14 the subject is now encoded by sieve again, so I get the following in my vacation mail: Subject: =?utf-8?q?=3D=3Futf-8=3Fb=3Fw4TDlsOc=3F=3D?= sadasd As you can see, the RFC2047 encoding is RFC2047 encoded, which results in an unreadable subject. According to RFC5230 section 4.3 this shouldn't happen: The ":subject" parameter specifies a subject line to attach to any vacation response that is generated. UTF-8 characters can be used in the string argument; implementations MUST convert the string to [RFC2047] encoded words if and only if non-ASCII characters are present. Implementations MUST generate an appropriate default subject line as specified below if no :subject parameter is specified. If I understand this right, sieve should do the RFC2047 encoding only if the string is non-ASCII. But the RFC2047 encoded string is already ASCII, so it should not be encoded a second time. I just compared this with sieve 0.1.13, which behaves different: It does not encode the Subject header at all. As long as the managesieve client (in our situation Horde/IMP) encodes the subject, everything works correct, while we run into trouble with 0.1.14. I think that there needs to some mechanism in sieve that checks whether the subject contains non-ASCII and does the encoding only in this case. I just checked out, that 0.1.14 does not encode a non RFC2047 encoded 7bit subject, while a 7bit subject starting with =?utf-8?... is encoded twice. Tschoeeee Roland -- Roland Rosenfeld - Content Delivery - NED - Technik NetCologne Gesellschaft für Telekommunikation mbH - HRB 25580, AG Köln Am Coloneum 9 50829 Köln Tel.: +49-221-2222-373 Fax: +49-221-2222-7373 Geschäftsführer: Werner Hanf, Karl-Heinz Zankel

4 6

[Dovecot] dovecot cannot access a specific folder
by Spyros Tsiolis 11 Jan '10

11 Jan '10

Hello list, Has someone stumbled upon this before ? -- Jan 09 11:25:01 IMAP(postmaster(a)webmail.domain.gr): Error: stat(/var/MailRoot/domains/webmail.domain.gr/postmaster/Maildir/tmp) failed: Permission denied (euid=501(vmail) egid=502(vmail) missing +x perm: /var/MailRoot) -- "/var/MailRoot" is the root path/folder for XMail. An smtp/pop3 server. Should I go ahead and chmod the folder or should I try to find a more delicate solution to this ? Any help would be greatly appreciated, Regards, spyros

2 1

[Dovecot] How to create UTF encoded folders?
by Kārlis Repsons 11 Jan '10

11 Jan '10

Hey, as I understand from post [1], system folders with UTF-8 chars in their names will only be available for use with Dovecot2 and I certainly look forward to that, but somehow I was short of info about the current use of UTF characters like ā, Ž etc. Should I just omit thinking about modified-UTF-7, avoid those characters for the time being and then with Dovecot2 create UTF-8 encoded folders with MUA and also on fs? Or there is something to know anyway? Please suggest as it would be a pity not to create folders with utf symbols... [1] http://www.mail-archive.com/dovecot@dovecot.org/msg23576.html

2 1

[Dovecot] "leave mail on server" workaround
by Kirill Miazine 11 Jan '10

11 Jan '10

Hello, POP users often keep fetched mail on server, by checking for "leave mail on server" or similar option in their client. What would be the best way to disallow them using such approach. That is, what is the best way to force deletion of messages that have been RETRieved in a POP session at the end of that POP session? RETRieved messages will be marked as \Seen, but since users might also use an IMAP client (e.g. webmail), it'll be dangerous to simply delete all \Seen messages in user's mailbox. I'm all open for suggestions. -- -- Kirill Miazine <km(a)krot.org>

5 9

[Dovecot] how to use dsync?
by joakim＠verona.se 10 Jan '10

10 Jan '10

I would like to try dsync but dont quite understand the usage string. Can anyone offer an example? -- Joakim Verona

2 1

[Dovecot] How to tell dovecot to use a specific MTA
by Spyros Tsiolis 10 Jan '10

10 Jan '10

Hello again people, OK. I checked a lot of HOWTOs and documents. One specific document describes how one can make dovecot "talk" to postfix. The procedure is pretty straightforward (taken from the document) : -- . Configuring Postfix and Dovecot Turn off sendmail: service sendmail stop chkconfig sendmail off system-switch-mail (select postfix) -- This is for CentOS systems. My question is pretty simple. How exactly does someone tell dovecot (or the CentOS system) that the MTA used is not a pre-packaged postfix MTA but (in my case as you have pretty much discovered by now) XMail compiled from source (no pre-packaged version AFAIK for CentOS; but even if existed, I would still build it on my own) ? Any help would be appreciated, Regards, spyros

2 1

[Dovecot] IMAP client dependence on dovecot mail storage fromat?
by Kārlis Repsons 09 Jan '10

09 Jan '10

Hi, After setting up a maildir tree with :LAYOUT=fs and accessing it with KMail and Thunderbird, various mail client-specific problems appeared, but, as I didn't try with maildir++, I would like to confirm here: does that matter for an IMAP client much if I store mail on server as ":LAYOUT=fs" or maildir++? Can it see differences? I would like to think, that IMAP protocol should provide for all transactions in a standard way and its dovecot's/server's sole business how it stores mail locally. However... These results seem not very good: KMail: try creating a folder "sub" in "parrent" and you'll get "parrent.sub" along with "parrent" on server side. There, however, are no problems with Latvian unicode chars. Thunderbird: it can create a new folder in "parrent" as desired, but it can't display Latvian unicode chars (being such at server side) on client, while, if I try creating a new folder with Thunderbird with these chars, on server it will look somewhat like base64! So I'm really confused. All together these things are pretty frustrating, sure, but I'd like to understand whats the real problem here!

1 1

Re: [Dovecot] Oracle SQL driver
by Alexander Bukharov 09 Jan '10

09 Jan '10

Added free() for the used VARCHAR pointer.

1 0

[Dovecot] Sieve > Pigeonhole > external storage with LDAP or other data source available to dovecot
by Martin F. Foster 09 Jan '10

09 Jan '10

I am looking at porting and generalizing an old in-house patch that I'm using for the CMU Sieve plugin. It allows sieve script to test & lookup arguments from LDAP. Before getting too involved in this, I'd like to discuss my goals here in the hopes that someone else also thinks this would be useful. Many heads may make better design? Goal: ------ Allows scripts which are still stored on the filesystem to lookup parameters stored in an LDAP directory. Useful if you provide a global sieve script to implement functions such as "vacation", forwarding to small groups (not a MLM), wish to toggle whether a message is kept in the mailbox after being forwarded, etc. <example> # determine if we always auto-respond, or if we respond with a more vacation-ish setting of every 30d # # sample LDAP entry: # uid: testuser(a)domain.com # mailResponderMode: vacation # mailResponderText: "I'm on vacation, far far from the Internet" (base64 encoded string...) # "always" reply mode, sanitized to once a day if ldap "mailResponderMode" "reply" { vacation :days 1 "ldap@mailResponderText"; } # traditional "vacation" mode, say reply once every 30d if ldap "mailResponderMode" "vacation" { vacation :days 30 "ldap@mailResponderText"; } </example> This introduces: 1. a new command "ldap", to lookup attributes and their values in an LDAP directory using the user's context 2. an extention to the vacation command that looks up the vacation reply text that is triggered by supplying "ldap@ldapAttribute" as the text. 3. other actions not shown above which extends redirect and a few other commands to lookup data from LDAP Related work: 1. Pigeonhole low priority TODO would like to implement alternate script storage, eg: LDAP & SQL. I'm not immediately interested in alternate types of script storage, but for what I want to acheive, I need to sanely access at least an LDAP directory. 2. draft-ietf-sieve-external-lists (http://tools.ietf.org/html/draft-ietf-sieve-external-lists-01) proposes a mechanism to pull mailing list addresses from external storage mechanisms such as LDAP, ACAP or relational databases. I'm interested in this, but would like to extend this functionality beyond just lists as the example above demonstrates. 3. there are security and resource consumption issues with doing this, suggesting that limits should be set, or the use may have to be restricted to global scripts eg: sieve_before or sieve_after The question: - do others on this list see value in the functionality described above? If there's some consensus that this would be useful, I'll flesh out howI think a generalized version of this old patch may behave, then (!) work on an implementation as a plugin to dovecot's sieve. cheers, -Martin Foster martin_foster(a)pacific.net.au martin.foster(a)pacnet.com

4 3