- dovecot - dovecot.org

[Dovecot] Connection queue full on dovecot 1.1.14 and 1.1.15
by Sven Eulberg 01 Jun '09

01 Jun '09

Hello, sometimes we get the following errors on out dovecot proxies: dovecot: May 27 20:06:10 Info: imap-login: Disconnected: Connection queue full (no auth attempts): REMOTE=<IP> LOCAL=<IP> TLS handshaking dovecot: May 27 20:06:10 Info: imap-login: Disconnected: Connection queue full (no auth attempts): REMOTE=<IP> LOCAL=<IP> TLS handshaking dovecot: May 27 20:06:10 Info: imap-login: Disconnected: Connection queue full (auth failed, 1 attempts): user=<USER>, method=PLAIN, REMOTE=<IP> LOCAL=<IP> dovecot: May 27 20:06:10 Info: imap-login: Disconnected: Connection queue full (no auth attempts): REMOTE=<IP> LOCAL=<IP> TLS handshaking dovecot: May 27 20:06:10 Info: imap-login: Disconnected: Connection queue full (no auth attempts): REMOTE=<IP> LOCAL=<IP> TLS handshaking dovecot: May 27 20:06:10 Info: imap-login: Disconnected: Connection queue full (auth failed, 1 attempts): user=<USER>, method=PLAIN, REMOTE=<IP> LOCAL=<IP> dovecot: May 27 20:06:10 Info: imap-login: Disconnected: Connection queue full (no auth attempts): REMOTE=<IP> LOCAL=<IP> TLS handshaking dovecot: May 27 20:06:10 Info: imap-login: Disconnected: Connection queue full (no auth attempts): REMOTE=<IP> LOCAL=<IP> TLS dovecot: May 27 20:06:11 Info: imap-login: Disconnected: Connection queue full (auth failed, 1 attempts): user=<USER>, method=PLAIN, REMOTE=<IP> LOCAL=<IP> TLS dovecot: May 27 20:06:12 Info: imap-login: Disconnected: Connection queue full (auth failed, 1 attempts): user=<USER>, method=PLAIN, REMOTE=<IP> LOCAL=<IP> TLS dovecot: May 27 20:06:15 Info: imap-login: Disconnected: Connection queue full (auth failed, 1 attempts): user=<USER>, method=PLAIN, REMOTE=<IP> LOCAL=<IP> dovecot: May 27 20:09:36 Info: imap-login: Disconnected: Connection queue full (no auth attempts): REMOTE=<IP> LOCAL=<IP> TLS dovecot: May 27 20:09:36 Info: imap-login: Disconnected: Connection queue full (no auth attempts): REMOTE=<IP> LOCAL=<IP> dovecot: May 27 20:09:36 Info: imap-login: Disconnected: Connection queue full (no auth attempts): REMOTE=<IP> LOCAL=<IP> TLS handshaking dovecot: May 27 20:09:36 Info: imap-login: Disconnected: Connection queue full (no auth attempts): REMOTE=<IP> LOCAL=<IP> TLS handshaking dovecot: May 27 20:09:36 Info: imap-login: Disconnected: Connection queue full (no auth attempts): REMOTE=<IP> LOCAL=<IP> TLS handshaking dovecot: May 27 20:11:18 Info: imap-login: Disconnected: Connection queue full (no auth attempts): REMOTE=<IP> LOCAL=<IP> TLS dovecot: May 27 20:11:18 Info: imap-login: Disconnected: Connection queue full (auth failed, 1 attempts): user=<USER>, method=PLAIN, REMOTE=<IP> LOCAL=<IP> TLS dovecot: May 27 20:39:22 Info: imap-login: Disconnected: Connection queue full (no auth attempts): REMOTE=<IP> LOCAL=<IP> TLS handshaking dovecot: May 27 20:39:22 Info: imap-login: Disconnected: Connection queue full (auth failed, 1 attempts): user=<USER>, method=PLAIN, REMOTE=<IP> LOCAL=<IP> TLS dovecot: May 27 20:39:23 Info: imap-login: Disconnected: Connection queue full (auth failed, 1 attempts): user=<USER>, method=PLAIN, REMOTE=<IP> LOCAL=<IP> Our config: ./dovecot -n # 1.1.15: /usr/local/dovecot-1.1.15/etc/dovecot.conf # OS: Linux 2.6.18-6-686 i686 Debian 4.0 base_dir: /usr/local/dovecot/var/run/dovecot/ log_path: /var/log/dovecot-1.1.log protocols: pop3 pop3s imap imaps ssl_ca_file: /usr/local/dovecot/etc/ssl/de.TR_CRT ssl_cert_file: /usr/local/dovecot/etc/ssl/de.CRT ssl_key_file: /usr/local/dovecot/etc/ssl/de.PKEY disable_plaintext_auth: no login_dir: /usr/local/dovecot/var/run/dovecot/login login_executable(default): /usr/local/dovecot-1.1.15/libexec/dovecot/ imap-login login_executable(imap): /usr/local/dovecot-1.1.15/libexec/dovecot/imap- login login_executable(pop3): /usr/local/dovecot-1.1.15/libexec/dovecot/pop3- login login_log_format_elements: user=<%u> method=%m REMOTE=%r LOCAL=%l %c login_process_per_connection: no login_greeting_capability(default): yes login_greeting_capability(imap): yes login_greeting_capability(pop3): no login_processes_count: 10 login_max_processes_count: 256 verbose_proctitle: yes mail_location: maildir:/home/email/%u/Maildir mailbox_idle_check_interval: 60 mmap_disable: yes fsync_disable: yes mail_executable(default): /usr/local/dovecot-1.1.15/libexec/dovecot/imap mail_executable(imap): /usr/local/dovecot-1.1.15/libexec/dovecot/imap mail_executable(pop3): /usr/local/dovecot-1.1.15/libexec/dovecot/pop3 mail_process_size: 512 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugin_dir(default): /usr/local/dovecot-1.1.15/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/dovecot-1.1.15/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/dovecot-1.1.15/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail outlook-idle netscape- eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): pop3_lock_session(default): no pop3_lock_session(imap): no pop3_lock_session(pop3): yes pop3_uidl_format(default): %08Xu%08Xv pop3_uidl_format(imap): %08Xu%08Xv pop3_uidl_format(pop3): %v.%u pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: mechanisms: plain login cache_size: 1024 cache_ttl: 28800 failure_delay: 3 passdb: driver: sql args: /usr/local/dovecot/etc/dovecot-mysql.conf It seems to me the error occurs more often after increasing login_processes_count. This errors exists with version 1.1.14 and 1.1.15 and I guess also in earlier versions. Thanks in advance! Best regards, Sven

2 2

[Dovecot] Feature Missing OUTBOX Folder
by Frank Doege 01 Jun '09

01 Jun '09

Hi Dovecot People, i have switched my system from courier-imap to dovecot and iam quite happy with it, the performance is well and i had nearly no problems. One little feature iam missing is in Courier i had a folder called "Outbox" there i could paste mails which i want to sent out. In some networks its not always available to sent mails via port 21, i know i could just set up my email server to another port but it was a nice feature. Is this a big afford or is it just alittle hack ? could it done via a little plugin ? Thanks Timo & all others for the great work ! Frank

5 7

[Dovecot] imap cann't read the mail that foxmail send
by wallace0615 01 Jun '09

01 Jun '09

Hi everyone: I use dovecot only as the imap server, For smtp and pop3, I use apache james. The dovecot version: 1.1.14 And the configuration is : protocols: imap ssl_disable: yes login_dir: /var/run/dovecot/login login_executable: /usr/libexec/dovecot/imap-login mail_location: mbox:/usr/local/edupass/mail/repo/%u:INBOX=/usr/local/edupass/mail/%u auth default: passdb: driver: sql args: /etc/dovecot-sql.conf userdb: driver: sql args: /etc/dovecot-sql.conf I have no porblems to login. When I use "telent host 25" to send a email, dovecot read it no problems. But when I use outlook and foxmail to send a email, dovecot cann't read the email data. I compared the data that using the two way to send, and found the reason: use outlook and foxmail: at the beginning of the eamil data is "From zxjteacher_SP_LZU <zxjteacher_SP_LZU@myserver>"; and if I telnet host 25 to send the mail: at the beginning of the eamil data is "From <zxjteacher_SP_LZU@myserver>", so I delete "zxjteacher_SP_LZU", dovecot read it out. "zxjteacher_SP_LZU" is because that outlook and foxmail need an account name to represent the eamil address. So, anyone ever confront with this situation? Any helps appreciate. Thx.

3 2

[Dovecot] Expire Plug-in stopped
by Matt Rude 01 Jun '09

01 Jun '09

Good evening, While working with Dovecot 1.2rc4 on Fedora 10, I have been trying to get the Expire plug-in to auto delete messages for us. When I run the plug-in with the test flag, I receive the following message: /usr/local/sbin/dovecot --exec-mail ext /usr/local/libexec/dovecot/expire-tool --test Info: amy(a)example.com/Trash: stop, expire time in future: 1242953758 All messages were deleted before the expire plug-in was added. I understand that dovecot will only expire messages after they have been in the trash or junk longer then the time in dovecot.conf. So I have let this fail since Monday, but continue to receive the same error. A quick grep for expire from my Dovecot logs doesn't show any output. Also, when I look up this error on google, I see other peaple who's output shows a real date (not 1242953758), how do I know when this date is? Thanks -Matt # 1.2.rc4: /usr/local/etc/dovecot.conf # OS: Linux 2.6.27.21-170.2.56.fc10.i686 i686 Fedora release 10 (Cambridge) ext3 listen: *:143 ssl_listen: *:993 ssl_cert_file: /etc/postfix/SSL/mail.mattrude.com.cert ssl_key_file: /etc/postfix/SSL/mail.mattrude.com.key login_dir: /usr/local/var/run/dovecot/login login_executable: /usr/local/libexec/dovecot/imap-login login_user: postfix mail_location: maildir:/var/spool/virtualmailboxes/%d/%u/:INDEX=/var/spool/virtualmailboxes/.Index/%d/%u/ mail_plugins: autocreate expire quota imap_quota zlib trash auth default: mechanisms: plain login cram-md5 cache_size: 128 cache_ttl: 600 passdb: driver: sql args: /etc/dovecot-mysql.conf userdb: driver: sql args: /etc/dovecot-mysql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: virtualmail group: virtualmail plugin: autocreate: Drafts autocreate2: Sent autocreate3: Trash autocreate4: Junk autocreate5: Junk.IsSpam autocreate6: Junk.IsNotSpam autocreate7: Save autosubscribe: Drafts autosubscribe2: Sent autosubscribe3: Trash autosubscribe4: Junk autosubscribe5: Junk.IsSpam autosubscribe6: Junk.IsNotSpam autosubscribe7: Save auth_socket_path: /var/run/dovecot/auth-master expire: Trash 1 Junk 3 expire_dict: proxy::expire quota: maildir:User quota quota_rule: *:storage=10M quota_rule2: Trash:storage=10%% quota_rule3: Junk:storage=20%% sieve: /var/spool/virtualmailboxes/%d/%u/dovecot.sieve sieve_storage: = /var/spool/virtualmailboxes/%d/%u/ trash: /etc/dovecot-trash.conf dict: expire: db:/var/spool/imap/expire.db

2 1

[Dovecot] Assertion failure in maildir-mail.c for gzipped maildir files in 1.1.15
by David S. Madole 01 Jun '09

01 Jun '09

I attempted an upgrade from 1.1.7 to 1.1.15 and encountered an apparent regression in handling gzipped maildir files. I have tried to narrow down the conditions under which it happens and reproduce it with as simple a case as possible. The actual mail application that exposed this problem is Squirrelmail. Starting off with the index files removed from the "Folder" maildir directory: * OK Dovecot ready. 1 login x y 1 OK Logged in. 2 select Folder * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft \*)] Flags permitted. * 13 EXISTS * 0 RECENT * OK [UIDVALIDITY 1220278111] UIDs valid * OK [UIDNEXT 14] Predicted next UID 2 OK [READ-WRITE] Select completed. 3 UID FETCH 3 (RFC822.SIZE INTERNALDATE) * 3 FETCH (UID 3 RFC822.SIZE 1085 INTERNALDATE "04-Jan-2004 09:23:45 -0500") 3 OK Fetch completed. 4 UID FETCH 4 (RFC822.SIZE INTERNALDATE) Connection closed by foreign host. The fetch of message 3, which is not gzipped succeeds, but the fetch of message 4, which is gzipped, fails with the following assertion in the log: Panic: imap: user=x, Status: file maildir-mail.c: line 85 (maildir_mail_stat): assertion failed: (fd != -1) Repeating, but first fetching only INTERNALDATE from the gzipped message succeeds, and once that value is cached in the index files, the same query that causes the failure before will now succeed, as it doesn't need to read the gzipped file any more to get INTERNALDATE: * OK Dovecot ready. 1 login x y 1 OK Logged in. 2 select Folder * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft \*)] Flags permitted. * 13 EXISTS * 0 RECENT * OK [UIDVALIDITY 1220278111] UIDs valid * OK [UIDNEXT 14] Predicted next UID 2 OK [READ-WRITE] Select completed. 3 UID FETCH 4 (INTERNALDATE) * 4 FETCH (UID 4 INTERNALDATE "02-Dec-2003 10:39:18 -0500") 3 OK Fetch completed. 4 UID FETCH 4 (RFC822.SIZE INTERNALDATE) * 4 FETCH (UID 4 RFC822.SIZE 6035 INTERNALDATE "02-Dec-2003 10:39:18 -0500") 4 OK Fetch completed. 5 logout * BYE Logging out 5 OK Logout completed. Connection closed by foreign host. Now that the value is cached, the same previously failing query will continue to execute fine, as long as the indexes remain in place: * OK Dovecot ready. 1 login x y 1 OK Logged in. 2 select Folder * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft \*)] Flags permitted. * 13 EXISTS * 0 RECENT * OK [UIDVALIDITY 1220278111] UIDs valid * OK [UIDNEXT 14] Predicted next UID 2 OK [READ-WRITE] Select completed. 3 UID FETCH 4 (RFC822.SIZE INTERNALDATE) * 4 FETCH (UID 4 RFC822.SIZE 6035 INTERNALDATE "02-Dec-2003 10:39:18 -0500") 3 OK Fetch completed. 4 logout * BYE Logging out 4 OK Logout completed. Connection closed by foreign host. Removing the indexes again, and this time first fetching just RFC822.SIZE first: * OK Dovecot ready. 1 login x y 1 OK Logged in. 2 select Folder * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft \*)] Flags permitted. * 13 EXISTS * 0 RECENT * OK [UIDVALIDITY 1220278111] UIDs valid * OK [UIDNEXT 14] Predicted next UID 2 OK [READ-WRITE] Select completed. 3 UID FETCH 4 (RFC822.SIZE) * 4 FETCH (UID 4 RFC822.SIZE 6035) 3 OK Fetch completed. 4 UID FETCH 4 (RFC822.SIZE INTERNALDATE) Connection closed by foreign host. In this case, the assertion fails again. Fetching RFC822.SIZE alone does not populate the indexes in a way that then allows RFC822.SIZE and INTERNALDATE to be fetched, as fetching INTERNALDATE alone does. It's all confusing to me, hopefully this make some sense to others. Let me know if there is other testing I can help with. I'm running on Slackware 12.1 and have reproduced the same issue with both kernel 2.6.24.4 and 2.6.27.7. The filesystem is XFS. The content of the gzipped message does not seem to matter. David

2 1

Re: [Dovecot] Missing IMAP folders after Server reboot
by punit_j 31 May '09

31 May '09

Did you try looking for the folders by connecting to IMAP using command line. telnet servername 143 a1 login username pass a2 list "" * Check if you could see anything.

1 0

[Dovecot] Missing IMAP folders after Server reboot
by Eoin Kennedy 31 May '09

31 May '09

Hi, Here is the situation, I hope somebody can help me. Our Email server running ubuntu 8.04.1 and dovecot 1.0.10 rebooted, and when it came back up the dovecot config had changed. Prior to the reboot, users stored their emails and folders in /var/mail/~username. Then the config became /var/mail/username for the main Inbox and /home/~username/mail for Folders. Now, none of the folders that users had created in their IMAP account are visible, and their contents are not in the main Inbox file. For example, the Drafts folder was there prior to the reboot, and now it had to be created in /home/username afterwards. These folders were not subfolders of the Inbox, but of the main IMAP root. All users were running Thunderbird as their client. Can they be recovered? Thanks, Eoin Kennedy ----------------------------------------------------------------------------- Sherling & Sons Ltd, Jamestown Road, Inchicore, Dublin 8, Ireland. Company Reg No. 9294 Website: www.sherlingsteel.com

2 2

[Dovecot] antispam plugin and MUA-Junk folders
by Steffen Kaiser 31 May '09

31 May '09

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, I have a configuration problem, that I ignored till now. Many MUAs tag SPAM themselves and move SPAM to a junk folder (Thunderbird uses "Junk"). It is said to not automatically train these mails, but let have an human revise them. Currently, I have configured those folders as "trash" folders for antispam, which means that those messages are essentially lost, because a move into a spam folder will not train them. -> The current antispam plugin ignores moves in and out of trash folders completely. I wonder why the move trash -> SPAM is ignored? If I configure those junk folders as "unsure" in antispam, the situation can happen, that an user selects a spam folder, the MUA identifies junk and moves the messages into its Junk folder. Current implementation would train this move as HAM. How about the following: 1) copy from * into trash or unsure -> not train 2) copy from !spam into spam -> train as SPAM 4) copy from spam or unsure into !(trash or unsure or spam) -> train as HAM 6) else -> not train Bye, - -- Steffen Kaiser -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iQEVAwUBSh0PdHWSIuGy1ktrAQKmaAf/ew1SixCkkWD2V12Jfw3mLcWnUrUSRq/J nsyMkW2//tX74wSJeMjbzlEkxN3dyfJg7f4WviGPdnUp5sqNGuS9lBfHh3ShQHtt 30+mRzVqizmcNEXBFoZXVy1K5hE8p9ssN9avahmUejBVPaSZHD0OjN5h8nFkNMDI XHU2347g03zr1MxejinWyRiKt1MFQyyJ6Y7gXNf6yascWKJA8W6b4Zu/eIH5uEW+ yiMuweaxJOwuGcwqh/qSKZTXnoCLa9rzvd8i/uZGvn7AXoT5u4P5coZkIHrh64U7 oswuYAZwxkmjGNLdGrovZadRJym16BlfVHH5g3Zo7k4nwX+kGRKyug== =9b+n -----END PGP SIGNATURE-----

2 1

[Dovecot] dovecot with MYSQL on Synology NAS
by heutekinderwirdswasgeben＠gmx.de 30 May '09

30 May '09

hello list, under my table I have a NAS station, the Synology DS-207+ there`s a linux with ipkg. the dovocot fromo ipkg didnt have mysql support. compiling seems to be also difficult, because of configure cant find libmysqlclient. experts, what to do for getting mysql support in dovecot? best regards hkwwg -- Nur bis 31.05.: GMX FreeDSL Komplettanschluss mit DSL 6.000 Flatrate und Telefonanschluss nur 17,95 Euro/mtl.!* http://portal.gmx.net/de/go/dsl02

2 1

[Dovecot] offlineimap with dovecot and sieve
by Dieter Faulbaum 29 May '09

29 May '09

I have a dumb question, is it possible to use this combination: Synchronising a remote IMAP-server and a local dovecot-IMAP-server by offlineimap (with both types = IMAP), which works very well. But it seems, that my sieve-scripts on the local dovecot server are not recognised by this combination. Is there a good debugging way for this? -- Dieter Faulbaum Elektronenspeicherring BESSY II Albert-Einstein-Str. 15, 12489 Berlin phone +49 30 6392-4652 fax +49 30 6392-2939 mail Dieter.Faulbaum(a)bessy.de

5 5

[Dovecot] LDAP (AD) auth problem
by Misha Volodko 29 May '09

29 May '09

I'm trying to authenticate users using MS AD with auth_bind option. Here is my config file: # 1.0.15: /etc/dovecot/dovecot.conf log_timestamp: %Y-%m-%d %H:%M:%S protocols: imaps ssl_cert_file: /etc/dovecot/ssl/cert.pem ssl_key_file: /etc/dovecot/ssl/key.pem disable_plaintext_auth: no verbose_ssl: yes login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login mail_privileged_group: mail mail_location: maildir:~/Maildir mail_debug: yes mail_plugins: acl auth default: verbose: yes debug: yes debug_passwords: yes passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf userdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf plugin: acl: vfile content of dovecot-ldap.conf hosts = myhost:389 auth_bind = yes auth_bind_userdn = cn=%n,ou=People,dc=company,dc=com base = ou=People,dc=company,dc=com user_attrs = mailNickname=home user_filter = (&(objectClass=user)(sAMAccountName=%n)) user_global_uid = vmail user_global_gid = vmail Using the same options I can fetch info with ldapsearch ldapsearch -h myhost -b 'dc=company,dc=com' -D 'cn=username,ou=People,dc=company,dc=com' -x -W '(&(objectClass=user)(sAMAccountName=username))' Dovecot doesn't work with this setting, shows in log: dovecot: auth(default): ldap(username,10.131.11.147): ldap_search() failed: Operations error Using tcpdump i found a cause of it, seems dovecot binds to AD server, then drop connection and trying to do search without bind. During sniff I see response to my ldap search - LdapErr: DSID-0C090627, comment: In order to perform this operation a successful bind must be completed on the connection Found similar problem in maillist - without solution. http://markmail.org/message/a6pui34ewb5bd55d Kindly asking what to do with it? :) -- Best Regards

2 6

[Dovecot] locking fails
by Oskar Eyb 29 May '09

29 May '09

hello! on one of my servers (freebsd 7.0-R , Jail) I have a very strange problem I guess its something about LOCKing. some programs have issued with locking: saslauthd[38127] :main : could not lock pid lock file: /var/run/saslauthd/saslauthd.pid.lock saslauthd[38127] :main : fcntl: Invalid argument dovecot: 2009-05-29 03:45:50 Info: dovecot v1.1.15 starting up dovecot: 2009-05-29 03:45:50 Info: Generating Diffie-Hellman parameters for the first time. This may take a while.. dovecot: 2009-05-29 03:45:50 Error: ssl-build-param: fcntl(write-lock) locking failed for file /var/db/dovecot/ssl-parameters.dat.tmp: Invalid argument dovecot: 2009-05-29 03:45:50 Fatal: ssl-build-param: file_try_lock(/var/db/dovecot/ssl-parameters.dat.tmp) failed: Invalid argument deliver(user(a)example.com): 2009-05-29 03:43:24 Error: fcntl(write-lock) locking failed for file /data/maildirs/example.com/user/dovecot.index.log: Invalid argument deliver(user(a)example.com): 2009-05-29 03:43:24 Error: mail_index_wait_lock_fd() failed with file /data/maildirs/example.com/user/dovecot.index.log: Invalid argument deliver(user(a)example.com): 2009-05-29 03:43:24 Info: msgid=<BLU129-W212F3C73CDDC4C399CE338FD510(a)phx.gbl>: save failed to INBOX: Internal error occurred. Refer to server log for more information. [2009-05-29 03:43:24] -rw------- 1 vmail vmail 24 May 29 03:43 /data/maildirs/example.com/user/dovecot.index.log all directorys are existent and wirtable I`m not sure if this only affects dovecot..maybe its a issue caused of the OS. anyone an idea? maybe its possible to run dovecot without these locking? thanks!! Oskar -- Nur bis 31.05.: GMX FreeDSL Komplettanschluss mit DSL 6.000 Flatrate und Telefonanschluss nur 17,95 Euro/mtl.!* http://portal.gmx.net/de/go/dsl02

2 5

[Dovecot] (no subject)
by Patrick Hemmen 29 May '09

29 May '09

Hi, I use a OpenLDAP for authentication. To authenticate a full DN as the user name must be used, like "cn=jim,ou=users,dc=example,dc=com". There are several domains, like example2.com and example3.com. I want to use Dovecot with ldap and authentication binds. For testing I use "auth_bind_userdn = cn=%n,ou=users,dc=%d" and the user name must provide as "jim@example,dc=com". To allow the special chars ("=,") in user name, I extend "auth_username_chars". Now my questions. Exists a real chance to attack the ldap directory with the extended "auth_username_chars"? And it's possible to use authentication binds with the regular "auth_username_chars" and a provided user names like "jim(a)example.com" in my special ldap directory structure? Thanks in advance - Patrick

2 3

[Dovecot] Clustering dovecot?
by dovecot＠corwyn.net 29 May '09

29 May '09

Currently I have a mail server running postfix and dovecot with users in mysql. I have Outlook (blich) clients checking IMAP mail on the server. I'd like to build some fault-tolerance into that system in case I have hardware failure. I've read through: http://wiki.dovecot.org/MailLocation/SharedDisk but I feel I need more information. My basic understanding is that I'll need 2 clustered systems running with shared disk space and shared IP. Performance/load-balancing isn't an issue for me, it's just fault-tolerance that I'm worried about. I found a nice long doc for Cyrus IMAP (http://cyrusimap.web.cmu.edu//ag.html) anything similar for dovecot? Rick Rick Steeves http://www.sinister.net "The more I learn, it seems, the less I know." Frazz

7 15

[Dovecot] expire: mysql table creation error
by John Fawcett 29 May '09

29 May '09

Don't know if anyone found this already (couldn't see anything in the archives about it) but maybe this is useful to someone else who finds the same problem. When following the instructions for setting up expire on v1.2+ for mysql backend at http://wiki.dovecot.org/Plugins/Expire I got the following error: mysql> CREATE TABLE expires ( -> username varchar(100) not null, -> mailbox varchar(255) not null, -> expire_stamp integer not null, -> primary key (username, mailbox) -> ); ERROR 1071 (42000): Specified key was too long; max key length is 1000 bytes that's because it's a utf8 database where every char is 3 bytes so a 355 char index is 1065 bytes. it worked ok with the following modification: mysql> CREATE TABLE expires ( -> username varchar(100) not null, -> mailbox varchar(255) not null, -> expire_stamp integer not null, -> primary key (username, mailbox(200)) -> ); Query OK, 0 rows affected (0.00 sec) but maybe that's not such a good primary key, probably better to do: mysql> CREATE TABLE expires ( -> id integer not null auto_increment, -> username varchar(100) not null, -> mailbox varchar(255) not null, -> expire_stamp integer not null, -> primary key (id), -> key (username, mailbox(200)) -> ); Query OK, 0 rows affected (0.00 sec) John

2 2

[Dovecot] dovecot: child xxxx (login) returned error 83 (Out of memory)
by Eric Sammons 29 May '09

29 May '09

Hi, Recently started receiving the error $SUBJECT. Soon after a number of segfault errors are reported for pop3-login. Based on my configuration, I believe I am set up to receive core files; however, my ulimit -c is 0. I have tried setting ulimit -c ... in /etc/init.d/dovecot and I have tried modifying /etc/security/limits.conf. In all cases /proc/[pid]/limits continued to report that my ulimit -c value was 0. What is the best process for capturing a core file from a login process (pop3-login). I have found some similar hits on the web for this; however, none appear to lead to resolution and in most cases the implementation includes imap, mysql, etc... Here is my dovecot.conf, any insight into the cause of this problem is greatly appreciated. Dovecot package is that shipped with RHEL 5.2 (dovecot-1.0.7-2.el5). <dovecot.conf> protocols = pop3 pop3s listen = * shutdown_clients = yes #log_path = /var/log/pop.log #info_log_path = /var/log/popinfo.log syslog_facility = local6 ssl_disable = no ssl_cert_file = /etc/pki/dovecot/certs/pop.pem ssl_key_file = /etc/pki/dovecot/private/pop.pem login_dir = /var/run/dovecot/login login_user = dovecot login_process_size = 64 login_process_per_connection = no login_processes_count = 3 login_max_connections = 512 login_max_processes_count = 512 max_mail_processes = 10000 login_greeting = Unauthorized access is prohibited. mail_location = mbox:/var/indexes/%u:INBOX=/var/spool/mail/%u mail_privileged_group = vmail pop3_lock_session = yes ######added for perfomance 61208 MT (Just for testing) # test with and without the following pop3_no_flag_updates = yes mmap_disable = yes mbox_read_locks = fcntl mbox_write_locks = fcntl mbox_lock_timeout = 300 #mbox_dirty_syncs = yes mbox_very_dirty_syncs = yes mbox_lazy_writes = yes mbox_min_index_size = 540 protocol imap { } protocol pop3 { pop3_uidl_format = %08Xv%08Xu } protocol lda { postmaster_address = postmaster(a)example.com } auth default { auth_cache_size = 10240 auth_cache_ttl = 18000 auth_debug=no mechanisms = plain passdb ldap { args = /etc/dovecot-ldap.conf } userdb ldap { args = /etc/dovecot-ldap.conf } auth_verbose = no } dict { } plugin { } ### The following added to troubleshoot segfault issue 6.16.08 by rt mail_drop_priv_before_exec = yes </dovecot.conf>

2 1

[Dovecot] Timeout during imapsync
by Craig Jackson 29 May '09

29 May '09

Hi, I'm using Imapsync to sync messages from an Exchange 2003 server to a Dovecot 1.1.11 server. The problem is that users' mailboxes are huge, several gigabytes with tens of thousands of messages. First Imapsync connects to Exchange and then to Dovecot, and then starts to get Inbox info from Exchange. By the time it gets this info, the connection to Dovecot has timed out. I realize the RFC calls for a 30 minute time out which I believe is hard coded into Dovecot. If there is a way around this by making a configuration change, please tell me. I have posted the same message on the Imapsync list in an attempt to find a work around with patched Imapsync. Thanks in advance. Craig Jackson

2 2

[Dovecot] plugin API docs?
by Dave McGuire 29 May '09

29 May '09

Is there any documentation for the plugin API? A cursory glance through the docs didn't turn up anything. Thanks, -Dave -- Dave McGuire Port Charlotte, FL

2 2

[Dovecot] dbox verses maildir - advantages/disadvantages
by James Brown 29 May '09

29 May '09

I am migrating our mail server from Courier-IMAP to Dovecot. We currently use maildir storage format. What are the advantages and disadvantages of Dovecot's dbox format over maildir? Does anyone have any performance benchmarks for both? What do people use to test performance? We are running on a Mac OS X box (10.5.7) using Postfix 2.6. Thanks, James.

2 1

[Dovecot] Dovecot and Phpgroupware compatibility
by Carlos Xavier 29 May '09

29 May '09

Hi, recently moved our server from mbox format to Maildir format. Almost all the users are very happy with this, since the speed had increased very much. I used mb2md to do the conversion and on this task all the mailboxes that had "." (dot) on their names were converted to "_". But there is one issue with this, we also use the webmail that comes with Phpgroupware, and it uses some mailbox that have fixed named like INBOX.Sent, INBOX.Draft and so on. When their names were changed the sent messages didn't get saved anymore, so I had to move them back to the old names. After that the sent messages returned to be saved again, but another troube showed up. As they start with .INBOX and have "." on the names, Dovecot shown them as a subdirectory of the INBOX and we got some people upset with this. I need help on configuring Dovecot to not show them this way, because if you look the .INBOX.Sent either on the webmail or by outlook, the field displayed is the sender, witch is not desired. When I did the conversion, to keep the compatibility with the old server (quota, avoid I/O botleneck, etc), I set two Maildirs, one at /var/spool/mail/$USER, to be the INBOX and another at the user home. We are using Dovecot version 1.1.13, and below is the relevant configuration on use. namespace public { prefix = "#mbox/" separator = / inbox = yes list = no location= maildir:/var/spool/mail/%u/:CONTROL=~/control:INDEX=~/control } namespace private { separator = / prefix = location= maildir:~/Maildir/:CONTROL=~/control:INDEX=~/control inbox = no } Best Regards, Carlos Xavier.

2 1

[Dovecot] Does a plugin can have root privileges ?
by Fabien 29 May '09

29 May '09

Hello, I wish to get "Fetchmail Wake" works in my environment. This plugin send SIGUSR1 to fetchmail so it wakes up when mail client grabs mail. For the moment "Fetchmail Wake" is executed by mail_uid (defined in dovecot.conf) which is not enough to send signal to fetchmail daemon (and access to fetchmail.pidfile). Thank you!

2 2

[Dovecot] Inotify instance limit for user exceeded, disabling?
by dovecot＠corwyn.net 29 May '09

29 May '09

I'm seeing this message in my /var/log/maillog: May 26 12:35:00 agencymail dovecot: IMAP(info(a)example.com): Inotify instance limit for user exceeded, disabling. Increase /proc/sys/fs/inotify/max_user_instances I rummaged through google, and found : http://www.dovecot.org/list/dovecot-cvs/2008-May/011132.html which says I need to increase /proc/sys/fs/inotify/max_user_instances (no surprise given the error message really). I can fix that with echo 256 > /proc/sys/fs/inotify/max_user_instances , but as /proc is temporary, so if I change it won't it break if/when the system reboots? The error message also implies that something has been disabled. If I increase /proc/sys/fs/inotify/max_user_instances will it fix automatically, or do I need to do something else? since it's a kernel message, I suspect just restarting dovecot won't do it. And what exactly is breaking when I receive this notification? The proc docs indicate: /proc/sys/fs/inotify (since Linux 2.6.13) This directory contains files max_queued_events, max_user_instances, and max_user_watches, that can be used to limit the amount of kernel memory consumed by the inotify interface. For further details, see <http://linux.die.net/man/7/inotify>inotify(7). Is this dovecot monitoring for new mail? thanks Rick [root@agencymail inotify]# dovecot -n # 1.1.8: /etc/dovecot.conf # OS: Linux 2.6.18-92.el5 i686 Red Hat Enterprise Linux Server release 5.2 (Tikanga) ext3 ssl_cert_file: /etc/httpd/certs/agencymail_example_com.crt ssl_key_file: /etc/httpd/certs/agencymail.example.com.key.no.password login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login login_max_processes_count: 256 mail_uid: 1015 mail_gid: 105 mail_location: maildir:/var/spool/mail/%d/%n/Maildir mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugins(default): acl quota imap_quota expire trash mail_plugins(imap): acl quota imap_quota expire trash mail_plugins(pop3): expire quota mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail outlook-idle imap_client_workarounds(imap): delay-newmail outlook-idle imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh dict_db_config: /etc/dovecot-db.conf auth default: mechanisms: plain login passdb: driver: sql args: /etc/dovecot-sql.conf userdb: driver: passwd userdb: driver: sql args: /etc/dovecot-sql.conf userdb: driver: static socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vuser group: vuser plugin: quota: maildir quota_rule: *:storage=102400000 quota_rule2: Trash:storage=100M acl: vfile:/etc/dovecot/acls trash: /etc/dovecot-trash.conf expire: Trash 14 Trash/* 14 Spam 14 expire_dict: proxy::expire dict: expire: mysql:/etc/dovecot-dict-expire.conf Rick Steeves http://www.sinister.net "The more I learn, it seems, the less I know." Frazz

3 2

[Dovecot] Problem in deliver (Panic: file index-mail-headers.c ...)
by Stefan Roese 29 May '09

29 May '09

Hi All, I'm experiencing a problem with some mails in deliver. Here the logged error message: deliver(stefan(a)roese.nl): 2009-05-06 11:57:36 Panic: file index-mail-headers.c: line 141 (index_mail_parse_header_finish): assertion failed: ((match[match_idx] & HEADER_MATCH_FLAG_FOUND) == 0) deliver(stefan(a)roese.nl): 2009-05-06 11:57:36 Error: Raw backtrace: /usr/lib/dovecot/deliver [0xb801ee51] -> /usr/lib/dovecot/deliver(default_fatal_handler+0x4c) [0xb801ef9c] -> /usr/lib/dovecot/deliver [0xb801e6e5] -> /usr/lib/dovecot/deliver(index_mail_parse_header+0x739) [0xb7fdea19] -> /usr/lib/dovecot/deliver(message_parser_parse_header+0x48) [0xb8016e88] -> /usr/lib/dovecot/deliver(index_mail_parse_headers+0x106) [0xb7fdef76] -> /usr/lib/dovecot/deliver [0xb7fdf566] -> /usr/lib/dovecot/deliver(index_mail_get_headers+0x2f) [0xb7fdf98f] -> /usr/lib/dovecot/deliver(mail_get_headers_utf8+0x25) [0xb7fe7315] -> /usr/lib/dovecot/modules/lda/lib90_cmusieve_plugin.so [0xb7dd7530] -> /usr/lib/dovecot/modules/lda/lib90_cmusieve_plugin.so [0xb7de2169] -> /usr/lib/dovecot/modules/lda/lib90_cmusieve_plugin.so(sieve_eval_bc+0x47e) [0xb7de33ee] -> /usr/lib/dovecot/modules/lda/lib90_cmusieve_plugin.so(sieve_execute_bytecode+0x125) [0xb7de9565] -> /usr/lib/dovecot/modules/lda/lib90_cmusieve_plugin.so(cmu_sieve_run+0x325) [0xb7dd8835] -> /usr/lib/dovecot/modules/lda/lib90_cmusieve_plugin.so [0xb7dd6486] -> /usr/lib/dovecot/deliver(main+0x11e4) [0xb7fa6eb4] -> /lib/tls/i686/cmov/libc.so.6(__libc_start_main+0xe5) [0xb7e09775] -> /usr/lib/dovecot/deliver [0xb7fa47c1] This is dovecot v1.1.11 used on Kubuntu 9.04. Any ideas what's the source for this problem and how to solve it? Thanks, Stefan

2 5

[Dovecot] A few easy pam and virtual domains questions
by Mauricio Tavares 29 May '09

29 May '09

I am using dovecot with postfix, which was setup to do virtual domains. Dovecot is setup to authenticate against pam (I know, I know) and knows to look for email in /var/spool/vmail/: virtual_mailbox_base = /var/spool/vmail I also have virtual_mailbox_maps defined as virtual_mailbox_maps = hash:/etc/postfix/vmaps.txt where I currently only have one account, % cat /etc/postfix/vmaps.txt raub(a)domain.com domain.com/raub/ % Inside raub we have the usual 3 directories, new,cur, and tmp. When I try to login through imap as raub@domain.com@mail.domain.com (i.e. since we are doing the virtual domain thingie, the username has to indicate the domain it belongs to), it will not take it. But, if I login as raub(a)mail.domain.com, it has no problems authenticating. However, it now expects to retrieve email from /var/spool/vmail/raub instead of /var/spool/vmail/domain.com/raub. Why would it be doing that? Could it be that pam reports raub to be a local account and as a result simply ignoring vmaps.txt? I asked dovecot to log everything it could. When I checked the log file, the following line screamed at me: dovecot: May 27 14:40:28 Info: IMAP(raub): maildir++: root=/var/spool/vmail//raub, index=, control=, inbox=/var/spool/vmail//raub Note the "//" in root and inbox declarations; between those slashes I would expect to be domain.com. Compounding the problem, and perhaps a clue of how pam is telling what these accounts are, postfix is completely ignoring /var/spool/vmail, placing the emails in /home/raub/Maildir (account is actually being nfs-automounted and user authenticated through ldap through pam). Once again I am guessing it too is being told raub is a local user; am I correct?

2 2

[Dovecot] What does "a" flag in Maildir format mean?
by Max Ivanov 29 May '09

29 May '09

Here is sample filename from Maildir: 1243423383.M745917P32169.termserv1,W=1295:2,Sa 1) why there is no S=<size> field? It definetely differs from 1295.I've not quota plugin, could it be the reason of this? 2) what does "a" flag mean? I not found any description of this neither in Maildir spec nor on the Dovecot wiki.

3 2

[Dovecot] syslog
by Mohsen Pahlevanzadeh 28 May '09

28 May '09

Dear all, How i use syslog for dovecot? Yours, Mohsen

2 1

[Dovecot] Testing 1.2
by Marc Perkel 28 May '09

28 May '09

Just installed it. Upgraded from 1.1.15. So far so good.

2 1

[Dovecot] test of mailing list
by Carlos Xavier 27 May '09

27 May '09

Im sendding messages to the list and they do not show up. its just a test, please ignore Regards, Carlos Xavier.

5 4

[Dovecot] RFC 3501 section 7
by Scott Haneda 27 May '09

27 May '09

Hello, been lurking a while, about to move over to Dovecot soon. I have a nice test machine up and running. My previous email server when talking IMAP to Apple Mail, will eventually go "deaf" and new messages will not make it to the Inbox of Apple Mail Client. A restart of the desktop application is required. I am told that the reason for this is that my current email server adheres to RFC 3501, specifically section 7, the second paragraph of which says: The client MUST be prepared to accept any response at all times. Apparently, Apple Mail is not adhering to that, and my email server is sending out that type of response. However, I look at this list, for which I am not entirely sure how accurate the actual test is: http://www.imapwiki.org/ImapTest/ServerStatus It lists Dovecot as one of only two that are fully compliant IMAP servers. Congrats on that. My questions are: Does Dovecot in fact support correctly the above mentioned RFC and subsection? I assume so. That being the case, I have not had issues in my testing of Dovecot, nor heard reports of Apple Mail and IMAP having any significant problems. How, if that is the case, can Apple Mail and Dovecot work well with each other, and my current email server is not able to? My primary reason for moving to Dovecot is to not be burdened by this issue, as well as have what I consider to be a more advanced storage mechanism for the actual messages. What I would like to avoid, is spending a lot of time migrating thousands of users to a new system, to only have them burdened by the same inability to have email come to them without an application relaunch. Thank you for any insight on this. * I have filed a bug report with Apple, which was accepted. Their system does not allow me to see the status on the report once it has been closed. -- Scott * If you contact me off list replace talklists@ with scott@ *

2 1

[Dovecot] Dovecot and Phpgroupware compatibility
by Carlos Xavier 27 May '09

27 May '09

Hi, I am resending this email, since the fist one didn't hit the list. Recently we moved our server from mbox format to Maildir format and started using Dovecot. Almost all the users are very happy with this, since the speed had increased very much. I used mb2md to do the conversion and on this task all the mailboxes that had "." (dot) on their names were converted to "_". But there is one issue with this, we also use the webmail that comes with Phpgroupware, and it uses some mailbox that have fixed named like INBOX.Sent, INBOX.Draft and so on. When their names were changed the sent messages didn't get saved anymore, so I had to move them back to the old names. After that the sent messages returned to be saved again, but another trouble showed up. As they start with .INBOX and have "." on the names, Dovecot shown them as a subdirectory of the INBOX and we got some people upset with this. I need help on configuring Dovecot to not show them this way, because if you reed the .INBOX.Sent either on the webmail or by Outlook, the field displayed is the sender, witch is not desired. When I did the conversion, to keep the compatibility with the old server (quota, avoid I/O bottleneck, etc), I set two Maildirs, one at /var/spool/mail/$USER, to be the INBOX and another at the user home. We are using Dovecot version 1.1.13, and below is the relevant configuration on use. namespace public { prefix = "#mbox/" separator = / inbox = yes list = no location= maildir:/var/spool/mail/%u/:CONTROL=~/control:INDEX=~/control } namespace private { separator = / prefix = location= maildir:~/Maildir/:CONTROL=~/control:INDEX=~/control inbox = no } Best Regards, Carlos Xavier.

2 1

[Dovecot] setgid error
by Roy Sigurd Karlsbakk 27 May '09

27 May '09

Hi all Trying to setup dovecot with mysql and postfix, I have configured it as given below. thecot user has the dovecot group as primary, and is also a member of mail and dovecot-users. Still, it can't setgid to dovecot-users. I tried changing the shell for the dovecot user to something useful and chmod'ing a file to dovecot-users, and it work well. Still, no mail comes through and dovecot gives me this error deliver(roy(a)somedomain.com): 2009-05-23 15:02:52 Fatal: setgid(115) failed with euid=115, gid=114, egid=114: Operation not permitted Any ideas? roy # Dovecot config # 1.0.15: /etc/dovecot/dovecot.conf log_path: /var/log/dovecot/dovecot.log log_timestamp: %Y-%m-%d %H:%M:%S disable_plaintext_auth: no verbose_ssl: yes login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login verbose_proctitle: yes mail_privileged_group: mail mail_location: maildir:/var/spool/dovecot/%d/%n auth default: default_realm: eventchief.com verbose: yes debug: yes passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf socket: type: listen master: path: /var/run/dovecot/auth-master mode: 432 user: dovecot group: mail -- Roy Sigurd Karlsbakk (+47) 97542685 / 98013356 roy(a)karlsbakk.net http://blogg.karlsbakk.net/ -- I all pedagogikk er det essensielt at pensum presenteres intelligibelt. Det er et elementært imperativ for alle pedagoger å unngå eksessiv anvendelse av idiomer med fremmed opprinnelse. I de fleste tilfeller eksisterer adekvate og relevante synonymer på norsk.

2 6

Re: [Dovecot] Capability problems dovecot 2.0
by reg9009 27 May '09

27 May '09

answered the wrong address... Timo Sirainen schrieb: > On May 27, 2009, at 2:35 AM, reg9009 wrote: > >> what if TB just needs the "IMAP4rev1" capability before logging in? > > That's a completely different issue. Meaning that v2.0 is buggy here > currently and returning an empty string, because I haven't yet decided > how to fix it. That explains all :) I'll try imap_capability manual override for now. Btw., when I telnet to the server, I get * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE AUTH=PLAIN AUTH=LOGIN AUTH=DIGEST-MD5 AUTH=CRAM-MD5] Dovecot ready. What's this capability string? Couldn't we use this one, at least until a user is logging in? > >> Where is the setting "imap_capability" used? I could try and see how TB >> is behaving, in parallel to Outlook, OE, etc. > > What do you mean by used? You should be able to just set in dovecot.conf: > > imap_capability = imap4rev1 and other stuff > > I didn't know if that shoul be used in some section or directly in dovecot.conf. Thx. Regards, Sebastian

1 0

[Dovecot] [bug] dovecot 1.1.15: segfault after message move
by Juergen Daubert 27 May '09

27 May '09

Hello, found the following in my error log: May 20 13:27:48 ser dovecot: imap-login: Login: user=<juergen>, method=PLAIN, rip=192.168.0.17, lip=192.168.0.90, TLS May 20 13:28:10 ser dovecot: Panic: IMAP(juergen): file imap-sync.c: line 439 (cmd_sync_delayed): assertion failed: (client->mailbox != NULL) May 20 13:28:10 ser dovecot: IMAP(juergen): Raw backtrace: imap [0x80cc01e] -> imap [0x80cc08a] -> imap [0x80cba78] -> imap [0x806642f] -> imap [0x80602c1] May 20 13:28:10 ser dovecot: child 23536 (imap) killed with signal 6 (core dumps disabled) it's almost always reproducible using the Heirloom mailx [1] mail client, with mutt I get a 'connection closed' message but no segfault: - login to the dovecot server via imap/imaps - move a message from INBOX to a another large mbox-file - quit Seems to be a new issue introduced with 1.1.15 because I don't see that with 1.1.14 or older versions. Greetings Juergen [1] http://heirloom.sourceforge.net/mailx.html #:> dovecot -n # 1.1.15: /etc/dovecot.conf # OS: Linux 2.6.27.23 i686 base_dir: /var/run/dovecot/ protocols: imap imaps pop3 pop3s ssl_cert_file: /etc/ssl/certs/dovecot.crt ssl_key_file: /etc/ssl/keys/dovecot.key disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login login_process_per_connection: no login_processes_count: 1 first_valid_gid: 100 mail_location: mbox:~/Mail:INBOX=/var/spool/mail/%u mbox_min_index_size: 100 mbox_very_dirty_syncs: yes mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 auth default: passdb: driver: shadow userdb: driver: passwd -- Juergen Daubert | mailto:jue@jue.li Korb, Germany | http://jue.li/crux

6 16

[Dovecot] example sql acl_shared_dict wiki
by Robert Schetterer 27 May '09

27 May '09

Hi Timo, wiki says --------- Shared mailbox listing ..... You could use any dictionary backend, such as SQL or Berkeley DB, but a simple flat file should work pretty well too: plugin { acl_shared_dict = file:/var/lib/dovecot/shared-mailboxes.db } .... -------- could you include an example for having acl_shared_dict in sql ? -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

2 6

[Dovecot] FTS Plugin design
by Rui Carneiro 26 May '09

26 May '09

Hi all, Currently I am developing some changes on the solr plugin. I want this plugin indexing also the attachment's content. I have already started to look on plugin's source but I am having some problems understanding how it works. I didn't understood yet what is the plugin's design and how the plugins are called from the core system and I was wondering if anyone could help me with that. Sorry if this doubts sound stupid but I am newcomer on Dovecot. Regards, Rui Carneiro

5 31

[Dovecot] Secure Sockets Layer client certificate authentication
by Stephen Feyrer 26 May '09

26 May '09

Hi everyone. Please note, I've asked a very similar question before and I apologize for sounding like a broken record. Well here it goes. What I want to do is authenticate my users using a certificate. Thereby authenticating both the user and server with strong tokens that are centrally managed. In the worst case scenario the user should only need to enter a password for the certificate store and then the certificate should trigger the appropriate level of access to their account. Is Dovecot the correct tool for the job? If yes then, how? Else if not, then what would you recommend? I have tried setting the auth mechanism to anonymous without any joy. My password file is set with nopassword. All my certificates work well with the Secure Sockets Layer system. This is the configuration I am currently running: # 1.2.beta1: /opt/etc/dovecot/dovecot.conf # OS: Linux 2.6.12.6-arm1 armv5tejl log_path: /opt/var/log/dovecot.log info_log_path: /opt/var/log/dovecot-info.log protocols: imaps ssl_ca_file: /opt/etc/ssl.ca/cacrl.pem ssl_cert_file: /opt/etc/ssl.ca/newcerts/imap.cer ssl_key_file: /opt/etc/ssl.ca/private/imap.key ssl_parameters_regenerate: 24 ssl_cipher_list: ALL:!LOW:!SSLv2 ssl_verify_client_cert: yes disable_plaintext_auth: yes verbose_ssl: yes login_dir: /opt/var/run/dovecot/login login_executable: /opt/libexec/dovecot/imap-login login_user: guest login_processes_count: 2 login_max_processes_count: 4 mbox_write_locks: fcntl mail_process_size: 512 imap_client_workarounds: outlook-idle tb-negative-fetch auth default: user: admin verbose: yes debug: yes ssl_require_client_cert: yes ssl_username_from_cert: yes passdb: driver: passwd-file args: /opt/etc/dovecot/h.org/passwd userdb: driver: passwd This is a log of a login attempt: dovecot: May 25 11:55:58 Info: auth(default): new auth connection: pid=22556 dovecot: May 25 11:56:08 Info: imap-login: Valid certificate: /O=home.org/emailAddress=admin(a)nas2.h.org/L=W/ST=C/C=G/CN=h.org dovecot: May 25 11:56:08 Info: imap-login: Valid certificate: /C=G/ST=C/O=h.org/OU=K F/CN=k dovecot: May 25 11:56:10 Info: auth(default): new auth connection: pid=22585 dovecot: May 25 11:56:16 Info: auth(default): client in: AUTH 1 PLAIN service=imap secured valid-client-cert cert_username=k lip=10.1.1.245 rip=10.1.1.1 lport=993 rport=53430 dovecot: May 25 11:56:16 Info: auth(default): client out: CONT 1 dovecot: May 25 11:56:16 Info: auth(default): client in: CONT<hidden> dovecot: May 25 11:56:16 Info: auth(default): passwd-file(k,10.1.1.1): lookup: user=k file=/opt/etc/dovecot/h.org/passwd dovecot: May 25 11:56:16 Info: auth(default): passwd-file(k,10.1.1.1): No password dovecot: May 25 11:56:16 Info: auth(default): client out: OK 1 user=k dovecot: May 25 11:56:16 Info: auth(default): master in: REQUEST 6 22164 1 dovecot: May 25 11:56:16 Info: auth(default): passwd(k,10.1.1.1): lookup dovecot: May 25 11:56:16 Info: auth(default): master out: USER 6 k system_user=k uid=500 gid=100 home=/ dovecot: May 25 11:56:16 Info: imap-login: Login: user=<k>, method=PLAIN, rip=10.1.1.1, lip=10.1.1.245, TLS With this configuration the client will connect over ssl and identify itself with a certificate but a client password is still required. -- Regards Stephen.

3 8

Re: [Dovecot] pop3 gives a permission denied error on chdir
by Kenneth Gonsalves 26 May '09

26 May '09

On Thursday 21 May 2009 12:40:00 you wrote: > exec "strace -f -o /tmp/access.log -etrace=file -p <pid_of_dovecot>" > then try to access pop3 when fail occurs send us /tmp/access.log > (gzipped) attached -- regards Kenneth Gonsalves Associate NRC-FOSS http://nrcfosshelpline.in/web/

3 7

[Dovecot] status=bounced (Command died with signal 11: "/usr/lib/dovecot/deliver"
by Chantal Rosmuller 26 May '09

26 May '09

Hi list, I use dovecot 1.1.11 on ubuntu 9.04, when I want to send a message to an email adres on this mailserver I get this error: status=bounced (Command died with signal 11: "/usr/lib/dovecot/deliver". The folders where the email should be delivered are created so it does not look like a permission problem. I connect to a mysql database where the email accoutn info is stored, this works. I use the same setup on an ubuntu 8.04 server with dovecot 1 and I have no problems on that server. What am I overlooking here? Here is my configuration: dovecot -n: base_dir: /var/run/dovecot/ log_path: /var/log/mail.log log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap pop3 imaps pop3s ssl_cert_file: /etc/ssl/certs/dovecot-cert.pem ssl_key_file: /etc/ssl/private/dovecot.pem disable_plaintext_auth: no login_dir: /var/run/dovecot-login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login first_valid_uid: 150 last_valid_uid: 150 mail_privileged_group: mail mail_location: mbox:/var/vmail/%2d/%d/%n mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 auth default: verbose: yes debug: yes debug_passwords: yes passdb: driver: sql args: /etc/dovecot/dovecot-mysql.conf userdb: driver: sql args: /etc/dovecot/dovecot-mysql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail postconf -n: append_dot_mydomain = no biff = no config_directory = /etc/postfix/ disable_vrfy_command = no home_mailbox = Maildir/ inet_interfaces = all mailbox_size_limit = 0 message_size_limit = 25000000 mydestination = $myhostname, localhost.$mydomain mydomain = domain.com myhostname = server.domain.com mynetworks = 127.0.0.0/24, 10.0.11.248, 10.0.11.249 myorigin = $mydomain recipient_delimiter = + setgid_group = postdrop smtpd_banner = $myhostname smtpd_client_restrictions = permit_sasl_authenticated permit_mynetworks reject smtpd_recipient_restrictions = permit_sasl_authenticated, permit_mynetworks, reject_unknown_recipient_domain, reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_path = private/auth smtpd_sasl_type = dovecot virtual_alias_maps = mysql:$config_directory/mysql_catchall_workaround.cf mysql:$config_directory/mysql_virtual_alias_maps.cf mysql: $config_directory/mysql_domain_alias_maps2.cf mysql: $config_directory/mysql_domain_alias_maps.cf virtual_gid_maps = static:118 virtual_mailbox_base = /var/vmail virtual_mailbox_domains = mysql:$config_directory/mysql_virtual_domains_maps.cf virtual_mailbox_maps = mysql:$config_directory/mysql_virtual_mailbox_maps.cf virtual_minimum_uid = 150 virtual_transport = dovecot virtual_uid_maps = static:150

4 15

[Dovecot] "Panic: file client.c: line 354: unreached"
by Ralf Hildebrandt 26 May '09

26 May '09

>From my log today: May 22 07:38:48 postamt dovecot: imap-login: Disconnected (no auth attempts): rip=141.42.245.68, lip=141.42.4.250 May 22 07:39:29 postamt dovecot: imap-login: Disconnected (no auth attempts): rip=141.42.245.68, lip=141.42.4.250 May 22 07:39:50 postamt dovecot: imap-login: Disconnected (no auth attempts): rip=141.42.245.68, lip=141.42.4.250 May 22 07:39:50 postamt dovecot: imap-login: Disconnected (no auth attempts): rip=141.42.245.68, lip=141.42.4.250 May 22 07:39:50 postamt dovecot: imap-login: Disconnected (no auth attempts): rip=141.42.245.68, lip=141.42.4.250 May 22 07:39:50 postamt dovecot: imap-login: Disconnected (no auth attempts): rip=141.42.245.68, lip=141.42.4.250 May 22 07:45:29 postamt dovecot: imap-login: Disconnected (no auth attempts): rip=141.42.245.68, lip=141.42.4.250 May 22 07:45:29 postamt dovecot: imap-login: Disconnected (no auth attempts): rip=141.42.245.68, lip=141.42.4.250 May 22 07:45:29 postamt dovecot: imap-login: Disconnected (no auth attempts): rip=141.42.245.68, lip=141.42.4.250 May 22 07:45:29 postamt dovecot: imap-login: Disconnected (no auth attempts): rip=141.42.245.68, lip=141.42.4.250 May 22 07:45:37 postamt dovecot: imap-login: Disconnected (no auth attempts): rip=141.42.245.68, lip=141.42.4.250 May 22 07:45:37 postamt dovecot: imap-login: Disconnected (no auth attempts): rip=141.42.245.68, lip=141.42.4.250 and then: May 22 07:45:37 postamt dovecot: imap-login: Panic: file client.c: line 354: unreached May 22 07:45:37 postamt dovecot: dovecot: child 19726 (login) killed with signal 6 (core not dumped - add -D to login_executable) (latest ip=141.42.245.68) Using v1.2.rc4 -- Ralf Hildebrandt Postfix - Einrichtung, Betrieb und Wartung Tel. +49 (0)30-450 570-155 http://www.computerbeschimpfung.de In our world, software has to be small, has to be debugged, has to ship as part of a major initiative, has to avoid compatibility problems, has to avoid end user calls. Bill Gates

2 3

[Dovecot] Dovecot 1.0.15, sieve fileinto subdirectory ?
by Karel Hendrych 26 May '09

26 May '09

Hi, does sieve plugin in 1.0.15 support fileinto subdirectory? There is a maildir .oss.dovecot and sieve rule: if envelope :contains "to" "k+dovecot" { fileinto "oss.dovecot"; } But I get LDA error: Couldn't open mailbox dovecot: Mailbox doesn't exist: dovecot Any suggestions? Delivery to non-subdirectories is working fine. Regards -- Karel

3 2

[Dovecot] libsieve problems / wishes
by Steffen Kaiser 26 May '09

26 May '09

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, I'm trying libsieve (853:42e154b8792e) to cope with our current installation, the following issues arise: 1) vacation addresses are compared case-sensitivly, e.g.: vacation :addresses [ "Steffen.Kaiser(a)example.com" ] ""; it won't match "steffen.kaiser@...". attached patch makes a first shot about that problem, leaving: 1a) maybe one should lower-case :addresses argument at compile time and my_address at run-time and then use strcmp() again. 1b) duplicate checks are case-sensitive, too. This is probably no big issue, because if the same person uses different variants of his/her mail address for sending, s/he does not deserve better. 1c) Suppression of replies to own mails are case-sensitive, too. Well, many people I know test that "it just works" by sending themselves a mail. I would disable this check. 2) we have about 157 ways to write the domain part. Not all accounts are available in all of them, but it's close to it. The old vacation program we used prior to "cmusieve" didn't care about the domain unless explicitly given. It was quite painful. Attached patch adds a "domainless" variant of :addresses arguments in such way, that vacation :addresses [ "Steffen.Kaiser" ] ""; matches any domain. Ideally, it would be better to specify all valid domains, but perhaps one can leave that for another approach with a different syntax, e.g. with "@*" as domain? Maybe, there is a better approach. Now there is possibility that common local parts are matched from alien domains easily. If to specify a set of "default" domains would be an option for libsieve, what is the suggested way: - - as user-option via dovecot.conf? - - as admin-enforced Sieve-script that sets some internal variables? aka using the multi-script capability - - ??? 3) Because I try to migrate from cmusieve v1.0, I have a name issue with "imapflags". README sec "* Supports all extensions provided by the original CMUSieve plugin:" and sec "Implementation Status" explains that "imapflags" is available. This is not true entirly: "imapflags" is not, lib-sieve uses the name "imap4flags" as defined by RFC. So, it leaves me with two options: 3a) convert all user scripts and hack Horde-Ingo, or 3b) have libsieve accept the alias "imapflags" for the extension "imap4flags". Would it be worhtwhile for libsieve to implement aliases for extensions, so that they are available in require by more than one name? About Horde-Ingo, maybe they have an update to use "imap4flags", too, but it looks like that I upgrade Dovecot before Horde. Bye, - -- Steffen Kaiser -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iQEVAwUBSYccg3WSIuGy1ktrAQLlaQf+NHtyBxMb3aqnaw58zapo3/5kgqMM4GA+ 68el9d1CK4URjuk9io3MBsSzEJ4lRy6VFHNLw0jyNEnZp7l0vv5UoiK/+af7LCW5 H2T/qYL+lG/ul870t0/3q5wHmtrriAGQqE215C1u5/trJRX/sQLzDq1tbOtV4/vQ xUa8P0TXvCsgGSzCCmNiU0AenTIRGnxo+sCiyxnDKhgmWph/t06GYHX77CKwumK8 O57rh3RD9hA5yjicTbEZVLzeDDPEmCFliiSR6qMukfxOwX6LIxqhfw8n3cmSm8+X QyK6d/pBxy6EC14XhRQ7Jjtse+gWraiVJ/kcXKuW8sNPphtrGM1fdQ== =uuB6 -----END PGP SIGNATURE-----

5 11

[Dovecot] Maildir with LAYOUT=fs not working
by Rich Wales 26 May '09

26 May '09

I'm considering converting a Cyrus system (managing my family's e-mail) to Dovecot. I'm trying Dovecot 1.1.15 on an Ubuntu 9.04 (2.6.28-11-server) system. My production server is currently running Cyrus 2.3.14. Since I have a huge number of folders and subfolders, I need to use LAYOUT=fs. However, it's not working consistently. I tried setting up a test account in Thunderbird (2.0.0.21), and I was able to create folders under the Inbox, and they showed up as nested subdirectories under my ~/Maildir on my mail server. So far, so good. However, when I tried a home-grown Perl script (an archival scheme for my work e-mail), Dovecot wouldn't create subfolders properly; instead of nesting them (as I thought LAYOUT=fs would do), it used a flat layout. Here is a trace (generated by my Perl script) of an IMAP session. This was supposed to log in as the user "stanford" (the name of my archival account); create a folder named "2009" if not already present; create (again, if not already there) a "2009-05" folder inside the "2009" folder; and, finally, save a message (marked as seen) inside the "2009-05" folder. 1 LOGIN XXXXXXXX XXXXXXXX1 OK Logged in. 2 STATUS user.stanford.2009 (MESSAGES)* STATUS "user.stanford.2009" (MESSAGES 0) 2 OK Status completed. 3 STATUS user.stanford.2009.2009-05 (MESSAGES)* STATUS "user.stanford.2009.2009-05" (MESSAGES 3) 3 OK Status completed. 4 APPEND user.stanford.2009.2009-05 (\Seen) {4043} + OK (message text here . . .) 4 OK [APPENDUID 1243306507 4] Append completed. 5 LOGOUT* BYE Logging out The above works perfectly when I'm talking to my Cyrus server. However, when I tried the same thing with Dovecot, I got a folder named "user.stanford.2009" in the "stanford" account's Maildir, and then another folder named "user.stanford.2009.2009-05" (again, in the Maildir -- NOT nested in the "user.stanford.2009" folder) -- and the message was stored in the "user.stanford.2009.2009-05" folder. I tried changing my Perl script to use "INBOX" instead of "user.stanford" -- but the result was basically the same, except I got new folders named "INBOX.2009" and "INBOX.2009.2009-05" directly in my archival account's Maildir. Finally, I tried omitting any prefix at all on the folder names, and I got new folders named "2009" and "2009.2009-05" -- again, directly in Maildir -- no nesting of one folder within another. I suppose I actually have two issues here -- the lack of folder nesting (even with LAYOUT=fs), and also Dovecot's failure to recognize a "user.XXX." prefix on a mailbox name as designating user XXX's inbox (something that seems to work fine on Cyrus). My Cyrus server currently has over 1,600 folders and subfolders, so I absolutely can't / won't consider switching it to Dovecot unless I can get the nested filesystem layout working. Any thoughts? -- Rich Wales / richw(a)richw.org / richw(a)stanford.edu Wikipedia: http://en.wikipedia.org/wiki/User:Richwales Facebook: http://www.new.facebook.com/profile.php?id=206680

2 1

[Dovecot] compile errors on latest hg trunk
by reg9009 26 May '09

26 May '09

Hi, I think there are some files missing (regarding auth mech-external): compile error (did fresh autogen.sh): gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/lib -I../../src/lib-auth -I../../src/lib-sql -I../../src/lib-settings -I../../src/lib-ntlm -I../../src/lib-otp -I../../src/lib-master -DAUTH_MODULE_DIR=\""/opt/dovecot-2.0/lib/dovecot/auth"\" -DPKG_LIBEXECDIR=\""/opt/dovecot-2.0/libexec/dovecot"\" -DPKG_RUNDIR=\""/opt/dovecot-2.0/var/run/dovecot"\" -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -Wstrict-aliasing=2 -MT mech-digest-md5.o -MD -MP -MF .deps/mech-digest-md5.Tpo -c -o mech-digest-md5.o mech-digest-md5.c mv -f .deps/mech-digest-md5.Tpo .deps/mech-digest-md5.Po make[3]: *** Keine Regel vorhanden, um das Target Â»mech-external.oÂ«, benÃ¶tigt von Â»dovecot-authÂ«, zu erstellen. Schluss. make[3]: Verlasse Verzeichnis '/home/inst/dovecot-2.0/dovecot-2-0-304238bbd36c/src/auth' make[2]: *** [all-recursive] Fehler 1 make[2]: Verlasse Verzeichnis '/home/inst/dovecot-2.0/dovecot-2-0-304238bbd36c/src' make[1]: *** [all-recursive] Fehler 1 make[1]: Verlasse Verzeichnis '/home/inst/dovecot-2.0/dovecot-2-0-304238bbd36c' make: *** [all] Fehler 2 (It's german environment, but means there is no rule to make target mech-external.o, needed by dovecot-auth). root@171:/home/inst/dovecot-2.0/dovecot-2-0-304238bbd36c/src# find . -name mech-dig* ../auth/.deps/mech-digest-md5.Po ../auth/mech-digest-md5.c ../auth/mech-digest-md5.o root@171:/home/inst/dovecot-2.0/dovecot-2-0-304238bbd36c/src# find . -name "*exte*" ../auth/.deps/mech-external.Po and compile error: gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/lib -I../../src/lib-auth -I../../src/lib-sql -I../../src/lib-settings -I../../src/lib-ntlm -I../../src/lib-otp -I../../src/lib-master -DAUTH_MODULE_DIR=\""/opt/dovecot-2.0/lib/dovecot/auth"\" -DPKG_LIBEXECDIR=\""/opt/dovecot-2.0/libexec/dovecot"\" -DPKG_RUNDIR=\""/opt/dovecot-2.0/var/run/dovecot"\" -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -Wstrict-aliasing=2 -MT mech-digest-md5.o -MD -MP -MF .deps/mech-digest-md5.Tpo -c -o mech-digest-md5.o mech-digest-md5.c mv -f .deps/mech-digest-md5.Tpo .deps/mech-digest-md5.Po make[3]: *** Keine Regel vorhanden, um das Target »mech-external.o«, benÃ¶tigt von »dovecot-auth«, zu erstellen. Schluss. make[3]: Verlasse Verzeichnis '/home/inst/dovecot-2.0/dovecot-2-0-304238bbd36c/src/auth' make[2]: *** [all-recursive] Fehler 1 make[2]: Verlasse Verzeichnis '/home/inst/dovecot-2.0/dovecot-2-0-304238bbd36c/src' make[1]: *** [all-recursive] Fehler 1 make[1]: Verlasse Verzeichnis '/home/inst/dovecot-2.0/dovecot-2-0-304238bbd36c' make: *** [all] Fehler 2 (It's german environment, but means there is no rule to make target mech-external.o, needed by dovecot-auth). Regards, Sebastian

2 1

[Dovecot] Segfault with dovecot -n / dovecot 2.0
by ja nein 26 May '09

26 May '09

Hi all, and while trying to get some environmental stuff via dovecot -n, I got a segfault (dovecot is not in system path): /opt/dovecot-2.0/sbin/dovecot -c /etc/dovecot-2.0/sql/dovecot.conf -n # 2.0.UNSTABLE: /etc/dovecot-2.0/sql/dovecot.conf # OS: Linux 2.6.24-23-xen x86_64 Ubuntu 8.04.2 nfs Segmentation fault stat("/home/dovecot/mail/", {st_mode=S_IFDIR|0777, st_size=4096, ...}) = 0 open("/etc/mtab", O_RDONLY) = 6 fstat(6, {st_mode=S_IFREG|0644, st_size=480, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7ff654983000 read(6, "/dev/sda2 / ext3 rw,noatime,nodi"..., 4096) = 480 stat("/", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 stat("/proc", {st_mode=S_IFDIR|0555, st_size=0, ...}) = 0 stat("/sys", {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0 stat("/var/run", {st_mode=S_IFDIR|0755, st_size=400, ...}) = 0 stat("/var/lock", {st_mode=S_IFDIR|S_ISVTX|0777, st_size=40, ...}) = 0 stat("/dev", {st_mode=S_IFDIR|0755, st_size=12820, ...}) = 0 stat("/dev/shm", {st_mode=S_IFDIR|S_ISVTX|0777, st_size=40, ...}) = 0 stat("/dev/pts", {st_mode=S_IFDIR|0755, st_size=0, ...}) = 0 stat("/home/dovecot", {st_mode=S_IFDIR|0777, st_size=4096, ...}) = 0 close(6) = 0 munmap(0x7ff654983000, 4096) = 0 write(1, "# OS: Linux 2.6.24-23-xen x86_64"..., 51# OS: Linux 2.6.24-23-xen x86_64 Ubuntu 8.04.2 nfs ) = 51 lseek(1, 0, SEEK_CUR) = -1 ESPIPE (Illegal seek) getsockname(1, 0x7fff5c986f50, [18446744069414584348]) = -1 ENOTSOCK (Socket operation on non-socket) --- SIGSEGV (Segmentation fault) @ 0 (0) --- +++ killed by SIGSEGV +++ Process 30890 detached Version is still dovecot 2.0 hg latest. Regards, Sebastian

3 2

[Dovecot] Converting mbox files with dots in names to Maildir
by Kenneth Porter 26 May '09

26 May '09

I tried to run convert-tool from dovecot-1.2-0.rc2 on a tree of mbox files with some containing dots in the filenames and got this failure: # /usr/libexec/dovecot/convert-tool ken /home/ken mbox:/home/ken/mail maildir:/home/ken/Maildir Error: Mailbox conversion: Couldn't create mailbox Lists.WINE.patches: Mailbox already exists Error: Internal failure *** glibc detected *** /usr/libexec/dovecot/convert-tool: double free or corruption (fasttop): 0x08ce6cc8 *** The directory in question contains these files: # ls Lists/WINE/ announce bugs cvs devel patches patches.20050130 Will I need to go through the (large) file tree and rename all files with dots in the names? If so, anyone have a script that will do that? (Changing the dot to dash would be fine with me.)

2 5

[Dovecot] lda deliver per instance sieve configuration
by J.P. Trosclair 26 May '09

26 May '09

I'd like to override the sieve settings in dovecot.conf for a deliver instance that is being run from a custom archiving script. This is dovecot 1.0.15 on debian lenny. Is this possible? Doesn't appear to be looking through the WIKI. If it's not any suggestions? The problem is the user specific sieve scripts override where the archived mail is supposed to be stored (maildir:~/.Archives.YYYY-MM) so I'd like to disable their sieve scripts while the archived mail delivery via deliver is taking place. Thanks, J.P.

2 1

[Dovecot] Separate home and mail folders problem on delivery
by Николай Бочев 26 May '09

26 May '09

Hello, I am using dovecot 1.2rc series on my mail server combined with postfix ( virtual users with postgre ). I have setup separate home and mail locations. It works fine ( with sieve etc. ). The user home folders are in /home/vmail/%d/%n and mailboxes are in /srv/mail/%d/%n . The permissions are fine and everything is working except in the following case : If a user does not have a home dir already crated ( the home dirs get auto created when creating a sieve script through managesieve for example ), and he recieves a message with an attachment, the delivery fails with the following error : May 19 10:47:28 mail postfix/pipe[2759]: 969531007B: to=<office(a)grandstarco.com>, relay=dovecot, delay=2296, delays=2296/0.2/0/0.06, dsn=4.3.0, status=deferred (temporary failure) The Dovecot deliver log says : > 2009-05-19 10:47:28 deliver(office(a)grandstarco.com): Error: creat(/home/vmail/grandstarco.com/office/.temp.mail.dodo.bg.2760.1242719248… failed: No such file or directory > 2009-05-19 10:47:28 deliver(office(a)grandstarco.com): Error: copy: i_stream_read() failed: No such file or directory > 2009-05-19 10:47:28 deliver(office(a)grandstarco.com): Error: sieve: msgid=<1242716935.24056.6.camel(a)shiny.bgservice.local>: failed to store into mailbox 'INBOX': Internal error occurred. Refer to server log for more information. [2009-05-19 10:47:28] > 2009-05-19 10:47:28 deliver(office(a)grandstarco.com): Error: sieve: script /home/vmail/global.sieve failed with unsuccessful implicit keep Here's my dovecot -n dovecot -n # 1.2.rc4: /etc/dovecot/dovecot.conf # OS: Linux 2.6.27-11-server x86_64 Ubuntu 8.10 ext3 log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps managesieve ssl_ca_file: /etc/dovecot/certs/cacert.pem ssl_cert_file: /etc/dovecot/certs/cert.pem ssl_key_file: /etc/dovecot/certs/key.pem ssl_key_password: 1234 ssl_cipher_list: ALL:!LOW:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login login_greeting: Dodo.bg IMAP Ready. mail_privileged_group: vmail mail_uid: 1001 mail_gid: 1001 mail_location: maildir:/var/mail/%d/%n mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugins(default): quota imap_quota fts fts_squat acl imap_acl expire mail_log autocreate mail_plugins(imap): quota imap_quota fts fts_squat acl imap_acl expire mail_log autocreate mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve mail_log_max_lines_per_sec: 0 imap_client_workarounds(default): outlook-idle delay-newmail imap_client_workarounds(imap): outlook-idle delay-newmail imap_client_workarounds(managesieve): namespace: type: private separator: / location: maildir:/srv/mail/%Ld/%Ln/ inbox: yes list: yes subscriptions: yes namespace: type: shared separator: / prefix: shared/%%u/ location: maildir:/srv/mail/%%d/%%n/:INDEX=~/shared/%%u list: children auth default: mechanisms: plain login master_user_separator: * verbose: yes debug: yes passdb: driver: passwd-file args: /etc/dovecot/passwd.masterusers pass: yes master: yes passdb: driver: sql args: /etc/dovecot/dovecot-sql-master.conf pass: yes master: yes passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: vmail plugin: convert_mail: maildir:/srv/mail/%d/%n fts: squat quota_warning: storage=95%% /usr/local/bin/quota-warning.sh 95 quota_warning2: storage=80%% /usr/local/bin/quota-warning.sh 80 quota: dict:user::proxy::quota quota_rule: *:storage=1GB quota_rule2: Trash:storage=10%% quota_rule3: spam:storage=20%% acl: vfile acl_shared_dict: file:/srv/mail/%d/shared-mailboxes.db expire: Trash/* 7 Spam 30 spam 7 expire_dict: proxy::expire mail_log_events: delete undelete expunge copy mailbox_delete mailbox_rename append mail_log_fields: uid box msgid size from subject sieve: /home/vmail/%d/%n/.dovecot.sieve sieve_dir: ~/sieve sieve_before: /home/vmail/global.sieve autocreate: Trash autocreate2: spam autosubscribe: Trash autosubscribe2: spam dict: quota: pgsql:/etc/dovecot/dovecot-dict-sql-quota.conf expire: pgsql:/etc/dovecot/dovecot-dict-sql-expire.conf Any ideas on what am i doing wrong are welcome

2 1

[Dovecot] convert-tool skip_dotfiles is not the actual option
by Kenneth Porter 26 May '09

26 May '09

Looking at the source for convert-tool.c, I see this: "Usage: <username> <home dir> <source mail env> <dest mail env>\n" \ " [skip_broken_mailboxes] [skip_dotfiles] [alt_hierarchy_char=<c>]" else if (strcmp(argv[i], "skip_dotdirs") != 0) set.skip_dotdirs = TRUE; Looks like the usage line needs to be fixed (dovecot-1.2-0.rc2).

2 1

[Dovecot] maillog plugin issue
by Ibrahim Harrani 26 May '09

26 May '09

Hello, I just installed dovecot 1.2-rc4 on FreeBSD with qmail and vpopmail. I am using roundcube webmail to test(read,delete,move mails) I configured mail-log plugin according to http://wiki.dovecot.org/Plugins/MailLog log fields: mail_log_fields: uid box msgid size This but in the log file I only that something like that. May 23 15:37:14 IMAP(test(a)mydomain.com): 127.0.0.1 Info: copy: uids=7, box=Spam, dest=Spam, size=540 May 23 15:37:14 IMAP(test(a)mydomain.com): 127.0.0.1 Info: delete: uids=7 May 23 15:37:14 IMAP(test(a)mydomain.com): 127.0.0.1 Info: expunge: uids=7, size=540 May 23 15:37:14 IMAP(test(a)mydomain.com): 127.0.0.1 Info: Disconnected: Logged out bytes=205/1558 I don't see msgid etc? Also I added flag_change to mail_log_events and from, subject, flags to mail_log_fields. I don't see anything about from, subject, flags etc. I only see the following lines. May 23 15:05:49 mail dovecot: IMAP(test(a)mydomain.com): flag_change: uids=5 May 23 15:05:49 mail dovecot: IMAP(test(a)mydomain.com): Disconnected: Logged out bytes=168/1027 Here is my config. Did I miss something? dovecot -n # 1.2.rc4: /opt/mail/imap/etc/dovecot.conf # OS: FreeBSD 6.3-RELEASE-p9 amd64 log_path: /var/log/dovecot.log protocols: imap pop3 ssl: no disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /opt/mail/imap/libexec/dovecot/imap-login login_executable(imap): /opt/mail/imap/libexec/dovecot/imap-login login_executable(pop3): /opt/mail/imap/libexec/dovecot/pop3-login login_greeting: Welcome first_valid_uid: 89 mail_debug: yes mail_executable(default): /opt/mail/imap/libexec/dovecot/imap mail_executable(imap): /opt/mail/imap/libexec/dovecot/imap mail_executable(pop3): /opt/mail/imap/libexec/dovecot/pop3 mail_plugins(default): mail_log mail_plugins(imap): mail_log mail_plugins(pop3): quota mail_log mail_plugin_dir(default): /opt/mail/imap/lib/dovecot/imap mail_plugin_dir(imap): /opt/mail/imap/lib/dovecot/imap mail_plugin_dir(pop3): /opt/mail/imap/lib/dovecot/pop3 mail_log_prefix: %Us(%u): %r mail_log_max_lines_per_sec: 0 auth default: passdb: driver: vpopmail userdb: driver: passwd userdb: driver: vpopmail plugin: mail_log_events: delete undelete expunge copy mailbox_delete mailbox_rename mail_log_group_events: mail_log_fields: uid box msgid size quota: maildir

2 1

[Dovecot] little problem with lmtp and 8bitmime mail from:
by ja nein 26 May '09

26 May '09

Hi all, I'm very excited to see lmtp in dovecot now. Starting to play, I encountered following problem: With senders in normal mail address format, everything is delivered right, lmtp works as expected. But with 8bitmime senders, like kernel mailing list, lmtp returns a 5.5.4 not supported and mail is bounced. Is this expected, meaning just not implemented, or could it be a bug? E.g.: Problem: MAIL FROM:<linux-kernel-owner+info=40xxxx.com-S1753112AbZEYPtt(a)vger.kernel.org> BODY=8BITMIME RCPT TO:<info(a)xxxx.com> DATA vstream_fflush_some: fd 12 flush 130 vstream_buf_get_ready: fd 12 got 89 501 5.5.4 Unsupported options Ok: MAIL FROM:<some.address(a)somewhere.com> RCPT TO:<info(a)xxxx.com> DATA vstream_fflush_some: fd 12 flush 71 vstream_buf_get_ready: fd 12 got 36 250 2.1.0 OK 250 2.1.5 OK 354 OK Dovecot version is latest hg dovecot-2.0 trunk. Regards, Sebastian

2 1

[Dovecot] Deleting mail account?
by David Reid 25 May '09

25 May '09

This is likely a daft question, but how do I remove a mailbox from a dovecot server? I'd like to simply remove it from the disk as well, deleting any messages, indexes etc etc Is there a way? david !DSPAM:1715,4a1a817434922186719589!

2 6

[Dovecot] creating skeleton Maildir
by Giuliano Gavazzi 25 May '09

25 May '09

Dear all, when I had a courier installation still in place I used to create the Maildir tree for a new user using its maildirmake (IIRC) utility. Now that I had to rebuild a server from scratch, and using dovecot did not install courier, I have to create Maildirs without that utility. I seem to remember that libexec/imap could be called in a way to create the Maildir and its required subfolders (.Sent, .Drafts, etc). Do I remember correctly? If so what are the command line options? I cannot find pointers in the wiki or elsewhere. If not, I will just create a template and script the whole process. Thanks Giuliano

3 4

[Dovecot] Dovecot Max Connections & mbox vs. maildir format - Recommendations?
by V S Rao 24 May '09

24 May '09

>> I had big issues with timeouts until I realize the the imap and mbox format >> isnt a good choice if your users have huge naiboxes. >> At my server there were users with mailboxes arount 700MB to over 1GB. each >> time one of those users checked their email >> the imap server had to open this huge file and parse it, causing I/O issues. >> The only solution I found it was switch from mbox format to maildir format. I am changing the subject line to reflect the discussion. I too have a similar case with large mailboxes. My user mix is 70% POP3 vs. 30% IMAP. Would maildir still be the best recommended format? What is the opinion of the experts here? The reason I am asking is that I am preparing to upgrade my mail server to RHEL 5.3. That would mean my Dovecot will be atleast 1.0.7, which should not be bad. If the recommendation is that I go from mbox format to Maildir, I want to plan that as well. However I don't want to land up in a situation where, I have to move back from Maildir to mbox again. So please do advice me on the best. BTW one question: Assuming that my server has enough resources, ( 8 CPU @ 3.0GHz, 8GB RAM, 2Gbps FC Storage directly attached to the server & Gigabit NIC) what is the maximum number of concurrent connections that Dovecot can handle POP3 + IMAP combined? And I am asking for all the processes combined: POP3-login processes IMAP-login processes POP3 sessions IMAP sessions Any TCP/IP kernel parameters to be tuned? or maybe in dovecot.conf? Any advice will be immensely valuable to me while doing the migration. Thanks and Regards V S Rao

2 1

[Dovecot] How can I put a file back in Maildir folder?
by Allan Cassaro 23 May '09

23 May '09

Hi, I have a problem: today, when I ran "fsck" some file was linked to "lost+find" folder... After some hours I has all files mapped (File / User). So... how can I put this files back in Maildir folder of this users? I tried with: cat $file | deliver -d username but without success... Any help will be appreciated! Thanks!

2 2

[Dovecot] How to add new features to sieve?
by Ed W 23 May '09

23 May '09

Hi, I like the idea of switching from maildrop to dovecot deliver+sieve, however, we use a couple of features that I'm not sure how to migrate: - We query the userdb and make some user specific params available to the filtering script (invented example, but say number of days to not repeat for the vacation script) - We have a fairly advanced filter (perl) which mangles the email in very specific ways to support users over low bandwidth connections. The email is delivered twice, once to an "Archive" folder and again to the inbox after being mangled. How to integrate this "mangling" script? - We have some custom routes for certain types of SMS messages, ie we have a free email to SMS option for certain networks. Could this be integrated and caught in "alert" functionality (how is the sms backend actually configured anyway?) I think the answer is to write one or more new sieve functions to provide this functionality, but can you give me a quickstart guide on how to do this? Certainly the first requirement is quite an interesting and generic plugin "lookup_db" type function which must have wider utility. The second requirement is a bit more specific, kind of like an xfilter wrapper which could be setup by the administrator I guess? Thanks Ed W

1 0

Re: [Dovecot] How to run Dovecot as IMAP Proxy?
by V S Rao 22 May '09

22 May '09

> > You will not get any support for 0.99 here, unless Timo can provide it. > It is *that* old, and your decision to use it - regardless of your > claimed reason - is baffling. I admit I am running a pretty old version and frankly speaking I was not hoping for any support. Let RH earn their money we paid as support. As you would have noticed I was looking for help in running Dovecot as a IMAP Proxy without the need to setup SQL etc. I only went into details to give clarity. I really appreciate all the responses and suggestions. >> We use recent Dovecot from atrpms.net with RHEL 5.3. Userbase is 25.000. >> Dovecot runs on three machines - as master (proxy) and with two slaves. >> The system is stable. We hardly need to touch it. I would be very much interested in knowing the details of your setup as I am suffering here with only 6000+ users. And that too with a config, which I frankly think is an overkill for our requirement. However maybe I should start a separate thread for that? Thanks and Regards V S Rao.

1 0

Re: [Dovecot] How to run Dovecot as IMAP Proxy?
by V S Rao 22 May '09

22 May '09

So I guess I will take the problem to imapproxy group and find out if I can get a clue to the issue I am facing. BTW, just to confirm once again, are there any known issues with Dovecot & imapproxyd? Because I find it strange that there should be around 8000 established connections between Squirrelmail and imapproxyd & around 400 connections between imapproxyd and Dovecot while on the mail server I see only a couple of connections (typically around 40). Or is it some configuration in Dovecot which is causing this kind of behavior, as I did not notice this while running uw-imap. Regards V S Rao

4 3

[Dovecot] v1.2.rc4 released
by Timo Sirainen 22 May '09

22 May '09

http://dovecot.org/releases/1.2/rc/dovecot-1.2.rc4.tar.gz http://dovecot.org/releases/1.2/rc/dovecot-1.2.rc4.tar.gz.sig I'm pretty hopeful that virtual mailbox code is finally crash-free. If people don't find many problems from this release, I'm thinking that rc5 could come in a couple of weeks and that would be renamed to v1.2.0 after a week or so if no one has reported bugs. v1.2.rc4 2009-05-17 Timo Sirainen <tss(a)iki.fi> * If /dev/arandom exists, use it instead of /dev/urandom (OpenBSD). * When logging to a file, the lines now start with a timestamp instead of "dovecot: " prefix. + IMAP: When multiple commands are pipelined, try harder to combine their mailbox syncing together. For example with Maildir pipelining STORE 1:* +FLAGS \Deleted and EXPUNGE commands the files won't be unnecessarily rename()d before being unlink()ed. + imap-proxy: Send backend's CAPABILITY if it's different from what was sent to client before. + IMAP: struct mail now keeps track of all kinds of statistics, such as number of open()s, stat()s, bytes read, etc. These fields could be exported by some kind of a statistics plugin (not included yet). + IMAP: SEARCH command now dynamically figures out how to run about 0.20 .. 0.25 seconds before seeing if there's other work to do. This makes the SEARCH performance much better. - Fixes to shared mailbox handling. - Fixes to virtual mailboxes. - THREAD command could have crashed. - Fixes to expire-tool. - mbox: Don't break if From_-line is preceded by CRLF (instead of LF). - dict process wasn't restarted after SIGHUP was sent to master.

2 1

[Dovecot] v1.1.15 released
by Timo Sirainen 22 May '09

22 May '09

http://dovecot.org/releases/1.1/dovecot-1.1.15.tar.gz http://dovecot.org/releases/1.1/dovecot-1.1.15.tar.gz.sig The command pipelining fix is pretty interesting. Wonder how much it improves performance, especially when deleting lots of messages from a large mailbox. v1.1.15 2009-05-17 Timo Sirainen <tss(a)iki.fi> + IMAP: When multiple commands are pipelined, try harder to combine their mailbox syncing together. For example with Maildir pipelining STORE 1:* +FLAGS \Deleted and EXPUNGE commands the files won't be unnecessarily rename()d before being unlink()ed. - IMAP: SEARCH command was slower than necessary in a large mailbox. - deliver: When forwarding messages, if -f parameter was given, it should have been used as the Return-Path. - Maildir saving: Fixed race condition bugs in uidlist handling, causing files to be given new UIDs sometimes. - mbox: Don't crash when expunging all messages and file doesn't end with [CR]LF. - expire-tool: Use mail_uid and mail_gid settings if userdb doesn't return uid/gid. - Berkeley DB dict: Transaction rollbacking was implemented wrong. - zlib plugin: Some email / FETCH command combinations could have disconnected the client or sent compressed garbage.

2 1

Re: [Dovecot] Authenticating with /etc/passwd
by June Qiu 22 May '09

22 May '09

Apologies for the confusion.. But I finally got what you meant. Yes, the version exists, but was omitted in the extract of the email. --- On Thu, 5/21/09, Charles Marcus <CMarcus(a)Media-Brokers.com> wrote: > From: Charles Marcus <CMarcus(a)Media-Brokers.com> > Subject: Re: [Dovecot] Authenticating with /etc/passwd > To: dovecot(a)dovecot.org > Date: Thursday, May 21, 2009, 10:17 PM > On 5/21/2009 10:11 AM, June Qiu > wrote: > > it is as displayed > > So there's some weird dovecot -n bug that doesn't show the > dovecot > version if the 'Warning: fd limit...' warning is output? > > > --- On Thu, 5/21/09, Charles Marcus <CMarcus(a)Media-Brokers.com> > wrote: > > > >> From: Charles Marcus <CMarcus(a)Media-Brokers.com> > >> Subject: Re: [Dovecot] Authenticating with > /etc/passwd > >> To: "June Qiu" <qljune(a)yahoo.com> > >> Cc: dovecot(a)dovecot.org > >> Date: Thursday, May 21, 2009, 6:39 PM > >> On 5/20/2009, June Qiu (qljune(a)yahoo.com) > >> wrote: > >>> dovecot -n: > >>> > >>> Warning: fd limit 256 is lower than what > Dovecot can > >> use under full load (more than 768). Either grow > the limit > >> or change login_max_processes_count and > max_mail_processes > >> settings > >>> # OS: SunOS 5.10 sun4u > >>> info_log_path: /var/log/dovecot.log > >> Is the missing version line a copy/paste error? Or > did the > >> warning > >> obscure it somehow? > > > -- > > Best regards, > > Charles >

1 0

Re: [Dovecot] How to run Dovecot as IMAP Proxy?
by V S Rao 22 May '09

22 May '09

Thanks for the many responses and views. I have taken RH support for my mail server only and so have to ensure they support me. So am going with their recommended version which is 0.99.x. Now on the webmail I have migrated to RHEL 5.3 and the dovecot being used there is 1.0.7.x. So that should support proxying, right? BTW, originally I did not go to Redhat. I moved from uw-imap to Dovecot 1.1.14 on the mail server for POP3. The problem of POP3 timeouts continued and I could not find any reason why POP3 was timing out when 400+ concurrent IMAP sessions were working fine. Moreover other network services such as SMTP, Telnet, SSH etc were working fine. Had the box installed behind a IPS box to see if there were any DoS attacks, but had to rule that out. As a last resort, paid RH for support and they made me downgrade Dovecot from 1.1.14 to 0.99.x. Surprisingly the moment I downgraded dovecot, the problem shifted to IMAP & remained ever since. So naturally they told me uw-imap was the problem and made me move to Dovecot 0.99.x for IMAP as well, but no improvement. But the surprising thing, as I mentioned in my original post, IMAP works fine on command line, with clients such as Outlook, THunderbird etc., but Webmail is very slow that its almost not available. BTW webmail was also running on RHEL 4.0. Seeing that the problem existed in webmail alone I upgraded webmail to RHEL 5.3 with all the latest RH supported packages on a new hardware. Any ideas to help me debug this issue would be of great help as I am stuck on this issue for almost a month now. Oh, btw regarding stats, I don't have a measure, but when webmail was working the login was well within 5 seconds. Now it takes forever (more than a min) or timeouts most of the time. Even after login, any request such as opening a mail or changing to a mail folder was well within 5 seconds. Now again it takes forever or timeouts most of the time. Thanks and Regards V S Rao ----- Original Message ----- From: "Timo Sirainen" <tss(a)iki.fi> To: "Dovecot Mailing List" <dovecot(a)dovecot.org> Sent: Friday, May 22, 2009 12:32:24 AM GMT +05:30 Chennai, Kolkata, Mumbai, New Delhi Subject: Re: [Dovecot] How to run Dovecot as IMAP Proxy? On Thu, 2009-05-21 at 11:47 -0700, Seth Mattinen wrote: > Yes, that too. My point was not to judge Dovecot's performance based on > a 0.99 version. ;) I've successfully used several versions of dovecot > 1.1.x with imapproxyd and IMAP-only webmail clients. Do you have any numbers about how much faster it works with imapproxyd vs. without?

4 3

Re: [Dovecot] How to run Dovecot as IMAP Proxy?
by V S Rao 21 May '09

21 May '09

Hi Timo, Thanks for the response. Apologize, but my responses are going to be a bit lengthy. > I have migrated from uw-imap to Dovecot for POP3 & IMAP service. I run > webmail using squirrelmail. When running uw-imap I used to run > up.imapproxyd on the webmail server for faster responses. After > migrating to Dovecot, I find that up.imapproxyd does not work well > with dovecot. > Why not? Here are my observations. I have around 6000+ mailboxes and roughly the same number of users. Earlier the mail server (running sendmail + uw-imap for POP3 & IMAP) would have around 80 pop3 connections (peak) and around 300 IMAP connections, concurrent. (ps -aef | grep imap | wc -l or ps -aef | grep pop3 | wc -l). There have been cases where I have observed upto 500 concurrent IMAP sessions. The IMAP connections are from a webmail server running Apache with Squirrelmail. The observation was that response was slow & so based on the suggestion on Squirrelmail for performance improvement we have installed up-imapproxyd on the squirrelmail machine. There was a significant improvement in the response times for the users, because of caching. After that I encountered some strange problems of POP3 timing out for users (earlier I did post that problem in this forum). I opened a ticket with Redhat and naturally they refused to support me with uw-imap running. So switched to Dovecot 0.99.x (I run the server on RHEL 4.0 and that is the max version supported by Redhat for that version). Ever since I did that POP3 works fine but now webmail is almost not available to the users. People usually get "connection dropped by IMAP server". However the IMAP server seems to work fine. Checked through manual "telnet <ip.address.of.mailserver> 143 & also through other client such as outlook & Thunderbird. I noticed that while the number of established connections for the webmail to mail server was shown as around 40 to 50 on the mail server, the same is shown as around 700 on webmail server. { netstat -an | grep :143 | grep ESTABLISHED | wc -l }. imapproxyd is configured to listen on port 9143 on the localhost and communicates to the mail server on std port 143. What was really bizzare is that when I check for the number of connections on port 9143 it shows around 8000! netstat -an | grep :9143 | grep ESTABLISHED | wc -l So I disabled the imapproxyd on the webmail & now at least the 50 connections are consistent. However the response is extremely slow and so was contemplating on the idea of trying out using another IMAP Proxy server and hence the question. > I don't understand Databases and don't want to install mysql etc for a > simple thing like IMAP PRoxy. > Do you just want it to proxy everyone to a single destination or to > different servers based on username? If you want everyone to the same > destination, why do you even want to use a proxy? I want to proxy all user to the same server. The idea being as explained above benefit from caching. > My question is can Dovecot be run as a IMAP PRoxy without the hassle > of setting up mysql etc? I use /etc/passwd for auth on the actual > dovecot server running IMAP & POP3. > Using checkpassword or SQLite would probably be the easiest solution. Or > generation of a passwd-file, but you'd have to keep it updated if users > change. If I used a passwd file on the webmail machine, running dovecot as a Proxy how would I configure dovecot on the webmail server? It has to accept connections from the squirrelmail and talk to the mailserver. I can do a rsync of the passwd file from the mail server to the webmail server using a small script whenever the file changes on the mail server. Of course the fundamental question from your response, I guess is, without a proxy why is the webmail slow? If proxy is not my problem, can you pls throw some light on why I am facing performance issues on my webmail alone? Thanks and Regards V S Rao

4 6

[Dovecot] IMAP Get Savedate plugin
by Alaa Ibrahim 21 May '09

21 May '09

Hi, I want to add a feature to the fetch command in IMAP, by enabling it to return the save date, when I request the SAVEDATE parameter. I want to use this for my webmail application, so I can show the users the deleted date when they are viewing the Trash folder. I was able to put it directly into the code (patch attached), but I was wondering if there is a way to put it as a plugin instead. Can somebody guide me on how to do that. Thanks a lot. ------------------------- Play the best Flash Games on the web with Maktoob Shams Games. http://games.maktoob.com/

2 3

[Dovecot] How to run Dovecot as IMAP Proxy?
by V S Rao 21 May '09

21 May '09

Hi All, I have migrated from uw-imap to Dovecot for POP3 & IMAP service. I run webmail using squirrelmail. When running uw-imap I used to run up.imapproxyd on the webmail server for faster responses. After migrating to Dovecot, I find that up.imapproxyd does not work well with dovecot. I tried to use dovecot as IMAP PRoxy server as per the document http://wiki.dovecot.org/PasswordDatabase/ExtraFields/Proxy I don't understand Databases and don't want to install mysql etc for a simple thing like IMAP PRoxy. My question is can Dovecot be run as a IMAP PRoxy without the hassle of setting up mysql etc? I use /etc/passwd for auth on the actual dovecot server running IMAP & POP3. Thanks V S Rao

2 1

[Dovecot] crypt() failure is possible
by Arkadiusz Miskiewicz 21 May '09

21 May '09

dovecot 1.1.15 in src/auth/password-scheme.c contains: static bool crypt_verify(const char *plaintext, const char *user ATTR_UNUSED, const unsigned char *raw_password, size_t size) { const char *password; if (size == 0) { /* the default mycrypt() handler would return match */ return FALSE; } password = t_strndup(raw_password, size); return strcmp(mycrypt(plaintext, password), password) == 0; } but according to man page crypt() can fail and NULL is returned then. On other hand glibc info page is silent about such failure. The thing is that I'm seeing crypt() failure here with new glibc 2.10.1 built with nss backend for crypt(), so it would be good to handle such case. (crypt failure was due to improper nss packaging but it could also happen if somehow nss file becomes corrupted) -- Arkadiusz Miśkiewicz PLD/Linux Team arekm / maven.pl http://ftp.pld-linux.org/

2 1

Re: [Dovecot] Authenticating with /etc/passwd
by June Qiu 21 May '09

21 May '09

it is as displayed --- On Thu, 5/21/09, Charles Marcus <CMarcus(a)Media-Brokers.com> wrote: > From: Charles Marcus <CMarcus(a)Media-Brokers.com> > Subject: Re: [Dovecot] Authenticating with /etc/passwd > To: "June Qiu" <qljune(a)yahoo.com> > Cc: dovecot(a)dovecot.org > Date: Thursday, May 21, 2009, 6:39 PM > On 5/20/2009, June Qiu (qljune(a)yahoo.com) > wrote: > > dovecot -n: > > > > Warning: fd limit 256 is lower than what Dovecot can > use under full load (more than 768). Either grow the limit > or change login_max_processes_count and max_mail_processes > settings > > # OS: SunOS 5.10 sun4u > > info_log_path: /var/log/dovecot.log > > Is the missing version line a copy/paste error? Or did the > warning > obscure it somehow? > > > -- > > Best regards, > > Charles >

2 1

[Dovecot] Authenticating with /etc/passwd
by June Qiu 21 May '09

21 May '09

I am trying to do authentication with /etc/passwd and something is not working right for me. Pls help! When i try to authenticate via pop3, I get: -ERR Authentication failed. In the logs, I get: May 21 11:14:07 Info: auth(default): client in: AUTH 1 PLAIN service=pop3 secured lip=127.0.0.1 rip=127.0.0.1 lport=110 rport=32774 resp=AGp1bmUAU0lORzNlcnQ= May 21 11:14:07 Info: auth(default): passwd(test1,127.0.0.1): lookup May 21 11:14:07 Info: auth(default): passwd(test1,127.0.0.1): Password mismatch May 21 11:14:07 Info: auth(default): passwd(test1,127.0.0.1): CRYPT(password) != 'x' May 21 11:14:09 Info: auth(default): client out: FAIL 1 user=test1 May 21 11:14:17 Info: pop3-login: Disconnected (auth failed, 1 attempts): user=<test1>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured dovecot -n: Warning: fd limit 256 is lower than what Dovecot can use under full load (more than 768). Either grow the limit or change login_max_processes_count and max_mail_processes settings # OS: SunOS 5.10 sun4u info_log_path: /var/log/dovecot.log protocols: imap pop3 listen(default): 127.0.0.1:143 listen(imap): 127.0.0.1:143 listen(pop3): * ssl_disable: yes disable_plaintext_auth: no login_dir: /usr/local/var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_greeting: IMAP ready. login_processes_count: 2 mail_debug: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 namespace: type: private separator: . prefix: INBOX. inbox: yes list: yes subscriptions: yes auth default: verbose: yes debug: yes debug_passwords: yes passdb: driver: passwd userdb: driver: passwd args: blocking=yes

3 2

[Dovecot] mkdir no permission
by Anna Obertacke 21 May '09

21 May '09

Hallo list-member, Please ignore my bad english. I cant wright bad but i understand well. I reinstalled my server and have big problems with (V 1.1.11) dovecot now. I work with Ubuntu 9.04 Server and want to use pop and imap with easy configuration. I fetch all my Mails on the server and want to look them up by apple Mail. Until yesterday dovecot only worked after I logged in and did something on the server, for example call "mail" oder call "mail.log". After reinstall yesterday it works no more. The new entry in log is "Internal error". Anything else was before yesterday also. My Error Logs: mail.log: May 19 10:00:38 ubuntu dovecot: POP3(annalein): mkdir(/home/annalein/Maildir/cur) failed: Permission denied (euid=1000(annalein) egid=1000(annalein) missing +w perm: /home/ annalein) May 19 10:00:38 ubuntu dovecot: POP3(annalein): Couldn't open INBOX: Internal error occurred. Refer to server log for more information. [2009-05-19 10:00:38] May 19 10:00:38 ubuntu dovecot: POP3(annalein): Couldn't open INBOX top=0/0, retr=0/0, del=0/0, size=0 May 19 10:00:43 ubuntu dovecot: IMAP(annalein): mkdir(/home/annalein/Maildir/cur) failed: Permission denied (euid=1000(annalein) egid=1000(annalein) missing +w perm: /home/ annalein) syslog: May 19 10:22:34 ubuntu dovecot-auth: pam_sm_authenticate: Called May 19 10:22:34 ubuntu dovecot-auth: pam_sm_authenticate: username = [annalein] May 19 10:22:34 ubuntu dovecot-auth: Warning: Using default salt value (undefined in ~/.ecryptfsrc) May 19 10:22:36 ubuntu dovecot-auth: Passphrase key already in keyring; rc = [1] May 19 10:22:36 ubuntu dovecot-auth: ecryptfs_add_passphrase_key_to_keyring: Error adding auth tok with sig [e54db404244691b7] to the keyring; rc = [1] May 19 10:22:36 ubuntu dovecot-auth: Error attempting to add filename encryption key to user session keyring; rc = [1] May 19 10:22:36 ubuntu dovecot-auth: Passphrase key already in keyring; rc = [1] May 19 10:22:36 ubuntu dovecot-auth: ecryptfs_add_passphrase_key_to_keyring: Error adding auth tok with sig [d7f23dd0d7e04b51] to the keyring; rc = [1] May 19 10:22:36 ubuntu dovecot-auth: Error attempting to add passphrase key to user session keyring; rc = [1] May 19 10:22:36 ubuntu dovecot-auth: There is already a key in the user session keyring for the given passphrase. My configuration ist in dovecot-postfix.conf. I can't call it by dovecot -n. But i changed allmost nothing from default- disable_plaintext_auth=no Some points in the file: protocols = imap pop3 imaps pop3s managesieve mail_location = maildir:~/Maildir Please tell what i should show you. Thank you for help. Greetings, Anna Obertacke.

3 5

Re: [Dovecot] Migration questions...
by Richard Hobbs 21 May '09

21 May '09

Hello again, people, I have been reading all of the emails sent back and forth recently, and reading many web pages, and I have a new draft of my migration plan. If anyone has the time and generosity to read through this latest plan for me and let me know if you spot any potential problems with it, i'd really appreciate it. FYI, we're moving from a Debian 3.1/exim/uw-imapd/qpopper/mbox setup to a Debian 5.0/exim/dovecot/maildir setup, and the final version of this document can hopefully become a useful guide for lots of people in future too, if I get it right :-) Anyway... here's the plan... 1. Install Debian with exim, spamassassin, mysqld (for Horde/IMP) and mailman. Use ReiserFS for the indexes and data. XFS would be second choice for filesystem, and this is something of a religious argument, but Dovecot's own page states that ReiserFS is a better choice, and loads of pages on the Internet say that one or the other is better - there's no clear winner, really, so ReiserFS (the FS we already know and trust) wins the battle. 2. Run an online update. 3. Setup IPMI and monitor it from Nagios. 4. Install HotSaNIC to monitor historical system stats. 5. Install and configure Dell OpenManage Server Administrator (or whatever it's called) to monitor hardware, and make sure we will be emailed if a hard drive fails. 6. Rsync homedirs and inboxes onto new server, ready for initial exim configuration. 7. Configure exim as per existing mail server and test that mailing lists and normal email works. You should now have the existing mail delivery solution on the brand new hardware. 8. Configure Spamassassin as per current configuration and test. 9. Configure mailman as per current configuration and test. 10. Once mail delivery is sorted, add "deb http://www.backports.org/debian lenny-backports main contrib non-free" into "/etc/apt/sources.list" and run "aptitude update && aptitude install debian-backports-keyring && aptitude update". 11. Install dovecot (at the time of writing, this was version 1.1.13-2). 12. Run the conversion utility (use "mb2md.py" from http://wiki.dovecot.org/Migration/MailFormat because "convert-tool" doesn't preserve msg UIDs) to convert all existing "mbox" mailboxes into "maildir" mailboxes, for use with Dovecot. 13. Setup exim to use Dovecot's delivery agent ("deliver") so the indexes are updated on mail delivery instead of when the mailbox is requested and also to use the new maildir format. 14. Setup dovecot for IMAP and POP3 and test. *****THIS IS WHERE THE REPEATABLE SECTION BEGINS***** 15. Stop exim and dovecot services. 16. Rsync homedirs and inboxes onto new server again. 17. Run the conversion utility (use "mb2md.py" from http://wiki.dovecot.org/Migration/MailFormat because "convert-tool" doesn't preserve msg UIDs) to convert all existing "mbox" mailboxes into "maildir" mailboxes. 18. Start exim and dovecot services and test SMTP, Spamassassin, mailman, IMAP and POP3. *****THIS IS WHERE THE REPEATABLE SECTION ENDS***** 19. Once everything is working perfectly, send an email to the entire company instructing them what to do after the outage and arrange an outage and do the following steps as soon as the outage begins: a. Unplug DMZ switch from firewall to make delivered mail wait at the sender. b. Stop exim, IMAP, POP3 and dovecot services on both mail servers. c. Rsync homedirs and inboxes onto new server again. d. Run the conversion utility (use "mb2md.py" from http://wiki.dovecot.org/Migration/MailFormat because "convert-tool" doesn't preserve msg UIDs) to convert all existing "mbox" mailboxes into "maildir" mailboxes. e. Start exim and dovecot services and test SMTP, Spamassassin, mailman, IMAP and POP3. f. Reconfigure my own mail client to point to the new mail server (192.168.2.3). g. Reconfigure firewall to think the mail server is now on 192.168.2.3 instead of 192.168.2.2. h. Prepare an email in webmail somewhere in the world, ready to send to a user on our mail server. i. Plug DMZ switch back into firewall and begin monitoring exim logs to check that mail is being delivered. j. Send the email from webmail and check that is goes through exim perfectly and is sitting in the users Inbox. NOTE: We now have a working mail delivery solution! k. Start dovecot IMAP and POP3 and test both. l. Once exim and dovecot are both working against live mailboxes, tell everyone the outage is over. 20. Install and configure Horde & IMP to access email via IMAP. 21. Reconfigure backup script to make sure new server is backed up. 22. Modify Nagios config to monitor new server. 23. DONE! Thanks in advance, everyone! :-) Richard. Brandon Lamb wrote: > On Fri, May 15, 2009 at 5:02 AM, Richard Hobbs > <richard.hobbs(a)crl.toshiba.co.uk> wrote: >> Seth Mattinen wrote: >>> Richard Hobbs wrote: >>>> Seth Mattinen wrote: >>>>> Phillip Macey wrote: >>>>>> On 14/05/2009 5:11 PM, Steffen Kaiser wrote: >>>>>>> On Wed, 13 May 2009, Richard Hobbs wrote: >>>>>>>> The main complaint we have from users is that their IMAP Inbox, with >>>>>>>> 5000 emails in it takes ages to appear, and no amount of coaxing will >>>>>>>> convince them to split their inbox into multiple folders. >>>>>>> Oh, we serve Maildir via Dovecot IMAP and 5000 messages per folder are >>>>>>> a wimp. Problems start if the user: >>>>>> We are having some performancec issues on our server at the moment - all >>>>>> I can put it down to is the large size of some maildirs. Eg. `ls -ld >>>>>> Maildir/cur` might show a directory >20Mb in size for some of our users >>>>>> (20-30k emails). >>>>>> (Performance issues == everything is running ok then all of a sudden >>>>>> load avg goes through the roof, system cpu time goes crazy. Reading mail >>>>>> grinds to a halt. Then everything recovers just as suddenly and the load >>>>>> avg gradually returns to normal levels) >>>>> Are you using ext3 by chance? Vanilla ext3 without directory indexing >>>>> (or whatever it's called) *hates* directories with a lot of files - like >>>>> maildir. Personally, I use XFS, which doesn't suffer from this problem >>>>> since it uses b-trees instead of a table(!) like ext3 does. >>>> This raises another question for me actually... >>>> >>>> We will have one volume for indexes and another volume for data (using >>>> maildir). We will be using the latest stable Debian Linux distro. >>>> >>>> Any opinions on the best filesystem to use? We would normally go >>>> ReiserFS for large volumes, and ext3 for small volumes because of the >>>> unlimited inodes in reiserfs, but i understand that support for that is >>>> beginning to disappear given that Hans Reiser got into a bit of trouble >>>> a few years ago. >>>> >>>> Anyway... that would leave ext3, but is there a better choice i could >>>> make in this instance? We do want performance, of course, but also >>>> complete reliability and resilience when it comes to system crashes >>>> etc... we do *not* want data corruption, and ext3 we know has a very >>>> good journalling and data recovery methods. Well... they're very mature, >>>> anyway. >>>> >>> I used to use ext3, ran into its horrible performance even with >>> directory indexing enabled, went to XFS and never looked back. All of my >>> systems are Debian stable. Reiser3 is part of the kernel so I wouldn't >>> worry about that; Namesys considered it complete and stopped work on it >>> long before the whole murder thing. Both Reiser3 and XFS have worse >>> reputations than ext3, however, I've seen ext3 filesystems hosed beyond >>> repair, too. All my XFS filesystems have battery-backed cache >>> controllers, so it hasn't happened to me yet, hopefully never. ;) One >>> catch with XFS (such as with LVM) to keep in mind is you can't ever >>> shrink it, only grow. >> Trouble is... i've been googling this as well, just now, and loads of >> people say XFS has the better performance, but loads of other people say >> ReiserFS has the better performance. >> >> We have battery backed up RAID controllers too, in this new system, and >> the systems are UPSd, so on that basis i'm still none the wiser! lol >> >> I appreciate your experience with XFS is a positive one, but even the >> dovecot web site says XFS might now be a good choice... >> >> http://wiki.dovecot.org/MailboxFormat/Maildir >> >> What a tough decision! I know it probably won't make too much difference >> in my situation, but i want this to be a very long-term solution, so >> want to do it right first time! >> >> Any other opinions on XFS vs Reiserfs with Dovecot maildir? >> >> Thanks again! >> >> Richard. >> >> >>> ext3 is mature but IMHO completely unsuitable for a busy mail server or >>> any situation where you'll have a bajillion of files in one directory. >>> The exact point at which ext3 will screw you over obviously depends on >>> many factors. But when it happens it'll probably be painful to reformat >>> to something better. >>> >>> ~Seth >>> >>> ______________________________________________________________________ >>> This email has been scanned by the MessageLabs Email Security System. >>> For more information please visit http://www.messagelabs.com/email >>> ______________________________________________________________________ >>> >>> >> -- >> Richard Hobbs (IT Specialist) >> Toshiba Research Europe Ltd. - Cambridge Research Laboratory >> Email: richard.hobbs(a)crl.toshiba.co.uk >> Web: http://www.toshiba-europe.com/research/ >> Tel: +44 1223 436999 Mobile: +44 7811 803377 > > We have been using XFS on our raids for the last few years. We have > fairly new hardware, and using maildir. Delivering over nfs using > exim+dovecot deliver. pop3/imap is near instant load on our webmail. > We have about 16,000 email accounts with ~175 imap+pop3 connections > open all the time. 20 drive sata2 raid 10. amd quad core 9850 with 8 > gigs ram. load sits about 0.30 - 0.45 all day/night. Last I checked > backups were 30-45 minutes, 413 gigs. 6,403,942 files. > > ______________________________________________________________________ > This email has been scanned by the MessageLabs Email Security System. > For more information please visit http://www.messagelabs.com/email > ______________________________________________________________________ > > -- Richard Hobbs (IT Specialist) Toshiba Research Europe Ltd. - Cambridge Research Laboratory Email: richard.hobbs(a)crl.toshiba.co.uk Web: http://www.toshiba-europe.com/research/ Tel: +44 1223 436999 Mobile: +44 7811 803377

2 2

Re: [Dovecot] pop3 gives a permission denied error on chdir
by Kenneth Gonsalves 21 May '09

21 May '09

On Wednesday 20 May 2009 01:20:37 you wrote: > On Tue, 2009-05-19 at 13:35 +0530, Kenneth Gonsalves wrote: > > May 19 09:16:10 greenchilly dovecot: chdir(/home/vmail/example.com/john) > > failed with uid 5000: Permission denied > > .. > > > I have looked at the archives and see that the problem has been reported > > before, but cannot find any solution. Dovecot as LDA has no problem > > accessing and writing mails to the directory as UID 5000. I suspect that > > it is trying to access some other directory and the error message is > > misleading. The directory /home/vmail/example.com/john is owned by user > > vmail with UID 5000. Any clues? > > And all the directories before that are also available for that user? yes > Are you using NFS? Are you using SELinux or something? no > Anyway that > chdir() syscall really failed with that error message. The reason for > that is less clear then.. v1.1+ would give a much nicer error message > here telling exactly what is wrong.. I have installed version 1.1.13, here is the mail log: May 20 10:33:54 greenchilly dovecot: auth(default): new auth connection: pid=1181 May 20 10:34:07 greenchilly dovecot: auth(default): client in: AUTH^I1^IPLAIN^Iservice=pop3^Isecured^Ilip=127.0.0.1^Irip=127.0.0.1^Ilport=110^Irport=42418^Iresp=<hidden> May 20 10:34:07 greenchilly dovecot: auth-worker(default): pam(john(a)example.com,127.0.0.1): lookup service=dovecot May 20 10:34:07 greenchilly dovecot: auth-worker(default): pam(john(a)example.com,127.0.0.1): #1/1 style=1 msg=Password: May 20 10:34:10 greenchilly dovecot: auth-worker(default): pam(john(a)example.com,127.0.0.1): unknown user May 20 10:34:10 greenchilly dovecot: auth(default): sql(john(a)example.com,127.0.0.1): query: SELECT email as user, passwd as password FROM view_users WHERE email='john(a)example.com'; May 20 10:34:10 greenchilly dovecot: auth(default): client out: OK^I1^Iuser=john(a)example.com May 20 10:34:10 greenchilly dovecot: auth(default): master in: REQUEST^I3^I1166^I1 May 20 10:34:10 greenchilly dovecot: auth(default): passwd(john(a)example.com,127.0.0.1): lookup May 20 10:34:10 greenchilly dovecot: auth(default): passwd(john(a)example.com,127.0.0.1): unknown user May 20 10:34:10 greenchilly dovecot: auth(default): master out: USER^I3^Ijohn@example.com^Iuid=5000^Igid=5000^Ihome=/home/vmail/example.com/john May 20 10:34:10 greenchilly dovecot: Fatal: chdir(/home/vmail/example.com/john) failed with uid 5000: Permission denied May 20 10:34:10 greenchilly dovecot: child 1182 (pop3) returned error 89 (Fatal failure) May 20 10:34:10 greenchilly dovecot: pop3-login: Login: user=<john(a)example.com>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured and here is the session info: lawgon@greenchilly:~$ telnet localhost pop3 Trying 127.0.0.1... Connected to localhost.localdomain. Escape character is '^]'. +OK Dovecot ready. user john(a)example.com +OK pass summersun +OK Logged in. Connection closed by foreign host. -- regards Kenneth Gonsalves Associate NRC-FOSS http://nrcfosshelpline.in/web/

3 7

Re: [Dovecot] Authenticating with /etc/passwd
by June Qiu 21 May '09

21 May '09

Solved. Thanks, Timo! --- On Thu, 5/21/09, Timo Sirainen <tss(a)iki.fi> wrote: > From: Timo Sirainen <tss(a)iki.fi> > Subject: Re: [Dovecot] Authenticating with /etc/passwd > To: "June Qiu" <qljune(a)yahoo.com> > Cc: dovecot(a)dovecot.org > Date: Thursday, May 21, 2009, 11:31 AM > On Wed, 2009-05-20 at 20:16 -0700, > June Qiu wrote: > > I am trying to do authentication with /etc/passwd and > something is not working right for me. Pls help! > .. > > May 21 11:14:07 Info: auth(default): > passwd(test1,127.0.0.1): CRYPT(password) != 'x' > > /etc/passwd doesn't have passwords nowadays. They're in > /etc/shadow. > Either user passdb shadow or passdb pam. > >

1 0

[Dovecot] compile error with patched dovecot-1.2.rc4
by Carlos Xavier 21 May '09

21 May '09

Hi, I just downloaded the dovecot-1.2.rc4.tar.gz to do some tests. I coud compile it and generate the package with no trouble on my Slackware 12.2.0 Then as I wanted to try the patchs available at http://hg.dovecot.org/dovecot-1.2/# I downloaded them and applied at once. When I tried to compile once again I got this error: cmd-thread.o: In function `cmd_thread': cmd-thread.c:(.text+0x219): undefined reference to `mail_thread_type_parse' ../../src/lib-storage/libstorage.a(mail-search-build.o): In function `search_arg_build': mail-search-build.c:(.text+0x10b9): undefined reference to `mail_thread_type_parse' collect2: ld returned 1 exit status make[3]: *** [imap] Error 1 make[3]: Leaving directory `/usr/local/src/dovecot-1.2.rc4/src/imap' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/usr/local/src/dovecot-1.2.rc4/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/usr/local/src/dovecot-1.2.rc4' make: *** [all] Error 2 I removed the patched folder and untarred it again, but at this time I decided to apply one patch at time just to see witch one gave me the trouble. When the first set of patch ( http://hg.dovecot.org/dovecot-1.2/rev/d42a8623a008 ) was applied I got the same error. Just to confirm it was this set of patch, I applied all the other set of patchs leaving that one not applied and the compilation went out with no trouble. As im not a expert so I am sending this report to the list in order to get it fixed. Best Regards, Carlos Xavier.

2 2

[Dovecot] Problem with pam/krb5 auth on AIX 5.3
by Jonathan Siegle 20 May '09

20 May '09

I'm using pam to authenticate users against my krb5 realm. Here is the problem scenario: User test2 attempts to login and their password is not expired so dovecot says: 0 login test2 myfavoritepassword 0 OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE SORT THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT IDLE CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH] Logged in 1 logout * BYE Logging out 1 OK Logout completed. User test1 attempts to login, but their password is expired. So dovecot says: 0 login test1 myfavoritepassword 0 NO d expired User test2 attempts to login and their password is not expired. But dovecot still says: 0 login test2 myfavoritepassword 0 NO d expired If I kill the pid with name "dovecot-auth -w", user test2 can login just fine unless I login with the user test1 before trying user test2. So it seems like something is getting cached. I'm running imap-login out of inetd, in case that matters. In my dovecot.conf, I don't have any caching/authentication variables activated. I don't see anything obvious to type in passdb pam{ } to type. For debug, I've enable pam for telnet and tested that without error. Also, the logs show that test2 This is dovecot revision 9062:694714d59cd9 . Looking at the logs, I see user test2 authenticate correctly in all instances. thanks, Jonathan

2 2

[Dovecot] %d does not expand to domain
by Giuliano Gavazzi 20 May '09

20 May '09

Hello, dovecot-1.1.7 on FreeBSD 7.1. Usernames have dot in them (like uname.example for a user in example.com) in dovecot.conf I have: mail_location: maildir:/userhomes/maildirs/%d/%n/Maildir and for authentication: username_format: %Ln In the client, tried with CONE and Mail.app, I put the username as: uname.example(a)example.com So, the authentication works fine, as it extracts the uname.example from the uname.example(a)example.com supplied. The mail_location does not: Apr 27 17:21:26 drum dovecot: imap-login: Login: user=<uname.example>, method=PLAIN, rip=88.149.183.86, lip=88.149.202.106, TLS Apr 27 17:21:26 drum dovecot: IMAP(name.example): Effective uid=1301, gid=1301, userhomes=/userhomes/example.com/uname Apr 27 17:21:26 drum dovecot: IMAP(uname.example): Namespace: type=private, prefix=INBOX., sep=., inbox=yes, hidden=no, list=yes, subscriptions=yes Apr 27 17:21:26 drum dovecot: IMAP(uname.example): maildir: data=/ userhomes/maildirs//uname.example/Maildir Apr 27 17:21:26 drum dovecot: IMAP(uname.example): maildir++: root=/ userhomes/maildirs//uname.example/Maildir, index=, control=, inbox=/ userhomes/maildirs//uname.example/Maildir it looks like the %d expands to the empty string. Could this be due to the "." in the username? Thanks Giuliano

3 12

[Dovecot] maildir filename with eg. ,S=1000, omitted
by Joseph LP 20 May '09

20 May '09

Hello. I encountered the wiki entry on maildirs not long ago. In it, it is suggested that the use of ,S= and ,W= may improve performance as dovecot does not need to calculate size itself. While my maildir filenames have ,W=, they lack ,S=. I've grepped dovecot.conf, but I can find no option to address this. Regards, Joseph

2 1

[Dovecot] Deleting everything left from lazy expunge
by Romer Ventura 20 May '09

20 May '09

Hello, My storage is running low and i was wondering what would be the best and easy way of deleting everything within the "deleted" and "expunged" folders for every user...? My mail resides in: /srv/mail/vmail/MYDOMAIN.COM/<users>/Maildir/ Thanks..!

3 3

Re: [Dovecot] using postfix+dovecot+squirrell+amavisd and spam folder per user
by ESGLinux 20 May '09

20 May '09

HI again, I cant get this work. I have followed these instructions: http://wiki.dovecot.org/LDA/Postfix Now I have this in my configuratio files: main.cf: .... virtual_transport = dovecot ..... master.cf: .... dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/libexec/dovecot/deliver -f ${sender} -d ${recipient} ... dovecot.conf: protocol lda { postmaster_address = postmaster(a)xeridia.com mail_plugins = quota cmusieve #sieve_global_dir = /etc/dovecot/sieve/ sieve = /etc/dovecot/sieve/dovecot.sieve log_path = /var/log/dovecot-deliver.log info_log_path = /var/log/dovecot-deliver.log } but when I send mails I don´t see that it uses dovecot lda at all: this is an extract of the log: ay 20 12:55:49 SBPRUEBAS postfix/cleanup[7049]: 9546769339: message-id=< 20090520105549.9546769339(a)SBPRUEBAS.dominio.com> May 20 12:55:49 SBPRUEBAS postfix/qmgr[7039]: 9546769339: from=< root(a)xerida.com>, size=314, nrcpt=1 (queue active) May 20 12:55:49 SBPRUEBAS amavis[6965]: (06965-01) (!!)WARN: all primary virus scanners failed, considering backups May 20 12:55:51 SBPRUEBAS postfix/smtpd[7056]: connect from unknown[127.0.0.1] May 20 10:55:51 SBPRUEBAS postfix/smtpd[7056]: 85D616933C: client=unknown[127.0.0.1] May 20 12:55:51 SBPRUEBAS postfix/cleanup[7049]: 85D616933C: message-id=< 20090520105549.9546769339(a)SBPRUEBAS.dominio.com> May 20 12:55:51 SBPRUEBAS postfix/qmgr[7039]: 85D616933C: from=< root(a)xerida.com>, size=760, nrcpt=1 (queue active) May 20 12:55:51 SBPRUEBAS amavis[6965]: (06965-01) Passed CLEAN, < root(a)xerida.com> -> <prueba(a)pruebax2.com>, Message-ID: < 20090520105549.9546769339(a)SBPRUEBAS.dominio.com>, mail_id: eaVsoxO6Fxg4, Hits: 1.374, size: 314, queued_as: 85D616933C, 1926 ms May 20 12:55:51 SBPRUEBAS postfix/smtp[7052]: 9546769339: to=< prueba(a)pruebax2.com>, relay=127.0.0.1[127.0.0.1]:10024, delay=2, delays=0.03/0.01/0.01/1.9, dsn=2.0.0, status=sent (250 2.0.0 Ok, id=06965-01, from MTA([127.0.0.1]:10025): 250 2.0.0 Ok: queued as 85D616933C) May 20 12:55:51 SBPRUEBAS postfix/qmgr[7039]: 9546769339: removed May 20 12:55:51 SBPRUEBAS postfix/virtual[7061]: 85D616933C: to=< prueba(a)pruebax2.com>, relay=virtual, delay=0.03, delays=0.01/0.01/0/0.01, dsn=2.0.0, status=sent (delivered to maildir) May 20 12:55:51 SBPRUEBAS postfix/qmgr[7039]: 85D616933C: removed I think I´m missing something, but I dont know what. thanks in advance for your answers ESG

2 2

[Dovecot] %d isn't expanded
by Roy Sigurd Karlsbakk 20 May '09

20 May '09

Hi all I have a box running Debian Lenny 5.0.1 and Dovecot 1.0.15. The user query given below does not expand %d, making logins fail. The password query seems to work well, according to the mysql query log. Any ideas why this happens? Best regards roy user_query = SELECT 'maildir:/var/spool/dovecot/%d/%n' as mail, uid, gid, domain FROM users WHERE username = '%n' and domain = '%d' # 1.0.15: /etc/dovecot/dovecot.conf log_path: /var/log/dovecot/dovecot.log log_timestamp: %Y-%m-%d %H:%M:%S disable_plaintext_auth: no verbose_ssl: yes login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login verbose_proctitle: yes mail_privileged_group: mail mail_location: maildir:/var/spool/dovecot/%d/%n auth default: default_realm: eventchief.com verbose: yes debug: yes passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf -- Roy Sigurd Karlsbakk (+47) 97542685 / 98013356 roy(a)karlsbakk.net http://blogg.karlsbakk.net/ -- I all pedagogikk er det essensielt at pensum presenteres intelligibelt. Det er et elementært imperativ for alle pedagoger å unngå eksessiv anvendelse av idiomer med fremmed opprinnelse. I de fleste tilfeller eksisterer adekvate og relevante synonymer på norsk.

1 0

[Dovecot] Dovecot is emptying Maildir folders
by Alexander Johannes 20 May '09

20 May '09

Hello, i have a annoying problem with dovecot after updating to 1.1.14. Dovecot seems to empty all cur/ and new/ Folders in the Maildir of a particular user several times a day (3 times so far). It leaves only unread messages in their place. All Index-Files are getting updated and reflect the "empty"-State of the Mailbox. A quick look over the logfiles reveals nothing which seems to be relevant to this malfunction. The error_log is empty for the relevant timeframe. There is no Expire/Expunge-Plugin running. Fortunately i have a hourly backup-snapshot to restore the Mailboxes, but this is obviously no solution. How can i debug this problem? Any advice is welcome. System: FreeBSD 7.1-RELEASE, dovecot-1.1.14, dovecot-managesieve-0.10.6, dovecot-sieve-1.1.6 (all installed via the ports-tree), exim-4.69_3 Clients: Thunderbird, Mail.app both IMAP only Regards, Alex

4 7

[Dovecot] using postfix+dovecot+squirrell+amavisd and spam folder per user
by ESGLinux 20 May '09

20 May '09

Hi All, As I say in the subject I use postfix, dovecot with squirrellmail as webmail and amavisd as spam control, My problem is that all the spam I catch is send to /var/lib/amavis/virus but I want to send this mails to the spam folder of each user. This way the user can see the mails and determine if they are really spam or false positive. I dont know exactly what element of the system is the responsible to do that (dovecot, amavis, posttix) any suggest? (although only be the initial point to look for it) Thanks in advance ESG

2 3

[Dovecot] expire-tool segmentation fault
by LEVAI Daniel 20 May '09

20 May '09

Hi! I'm using Dovecot 1.1.15 on OpenBSD 4.4. How can I debug this? # /usr/local/sbin/dovecot --exec-mail ext /usr/local/libexec/dovecot/expire- tool Segmentation fault (core dumped) # gdb /usr/local/sbin/dovecot (gdb) run --exec-mail ext /usr/local/libexec/dovecot/expire-tool Starting program: /usr/local/sbin/dovecot --exec-mail ext /usr/local/libexec/dovecot/expire-tool Program received signal SIGTRAP, Trace/breakpoint trap. Cannot remove breakpoints because program is no longer writable. It might be running in another process. Further execution is probably impossible. 0x044628c0 in ?? () (gdb) bt full #0 0x044628c0 in ?? () No symbol table info available. What else could I do? Thanks! Daniel -- LÉVAI Dániel PGP key ID = 0x4AC0A4B1 Key fingerprint = D037 03B9 C12D D338 4412 2D83 1373 917A 4AC0 A4B1

2 4

[Dovecot] National symbols imap search
by Max Ivanov 20 May '09

20 May '09

How does imap server should handle search requests with non latin symbols? Rightnow thunderbird 2.0.0.21 and dovecot1.2rc3 are unable to find any message if I try to search for cyrillic symbols. fts, and squat plugins are enabled

3 2

[Dovecot] POP3 with lot of messages
by Matt 20 May '09

20 May '09

Running Dovecot 1.1.8. Have several email accounts with thousands of messages in them that are left on server. Is there anyway to speed up POP3 access without switching to IMAP? Doubt it but thought I would ask. Matt

3 4

[Dovecot] pop3 gives a permission denied error on chdir
by Kenneth Gonsalves 19 May '09

19 May '09

hi, I am running debian lenny standard install and dovecot also as a standard install. I have a problem with POP3 access. The error message is: May 19 09:16:10 greenchilly dovecot: chdir(/home/vmail/example.com/john) failed with uid 5000: Permission denied May 19 09:16:10 greenchilly dovecot: child 26253 (pop3) returned error 89 May 19 09:16:10 greenchilly dovecot: pop3-login: Login: user=<john(a)example.com>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured I have looked at the archives and see that the problem has been reported before, but cannot find any solution. Dovecot as LDA has no problem accessing and writing mails to the directory as UID 5000. I suspect that it is trying to access some other directory and the error message is misleading. The directory /home/vmail/example.com/john is owned by user vmail with UID 5000. Any clues? my config: greenchilly:/etc/dovecot# dovecot -n # 1.0.15: /etc/dovecot/dovecot.conf log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_privileged_group: mail mail_location: maildir:/home/vmail/%d/%n/Maildir mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv auth default: mechanisms: plain login passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: passwd userdb: driver: static args: uid=5000 gid=5000 home=/home/vmail/%d/%n allow_all_users=yes socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail -- regards Kenneth Gonsalves Associate NRC-FOSS http://nrcfosshelpline.in/web/

2 1

[Dovecot] Virtual users, local delivery via LDA and LDAP troubles
by Konstantin Khomoutov 19 May '09

19 May '09

We're investigating the possibiliy to migrate our mail system from Sendmail+Cyrus to Sendmail+Dovecot. The system must use authentication against Windows AD (supposedly using LDAP) and must use virtual hosting. So far we managed to work around a bug reported in [1], and IMAP/POP3 authentication on LDAP works OK. LDAP auth is set up using binds (Cyrus and Ejabberd authenticate against the same LDAP server without problems). As we use virtual users, userdb is set to be "static" in a standard way: userdb static { args = uid=10513 gid=10513 home=/var/local/dovecot/%u } After verifying IMAP/POP3 authentication works, I've set up the Dovecot LDA to deliver mail for domain users. This exposed another problem which I don't understand: the delivery program tries to figure out whether the user exists (which is perfectly sensible), it talks to the "master" authentication process which seemingly uses passdb backend to search LDAP. But this fails with the message "passdb doesn't support lookups, can't verify user's existence". [2] suggests it's auth binds that prevent this scheme from functioning correctly, but we can't stop using auth binds as Windows AD doesn't store users' passwords in any way sensible for external consumption. This would also pose unnecessary security risk on the domain, as the account used for initial binding should have had rights to read passwords, and its credentials are placed in the Dovecot configuration file in clear text. I read about "allow_all_users" in [3], but our Sendmail doesn't check whether the target user exists and we don't want to implement this as it logically pertains to the program which actually manages users' mailboxes -- Dovecot in our case. Is there a way to solve the problem at hand within the specified constraints? 1. http://dovecot.org/pipermail/dovecot/2009-May/039540.html 2. http://www.mail-archive.com/dovecot@dovecot.org/msg09449.html 3. http://www.mail-archive.com/dovecot@dovecot.org/msg08848.html

2 1

[Dovecot] what is deliver(1.1.10) doing in /tmp
by Pawel Eljasz 19 May '09

19 May '09

dear all, first part of log snippet is to show a bit of contrast, to me it's peculiar situation it's about messages between local users, actually one user, when I use command line mailx or anther local account to send to A_local user - ok second part is this weir error, it's selinux which prevents deliver write to /tmp, I believe thsese messages are from A_local user cron jobs(to himself) why would dovecot act differently in these scenarios, why would it need /tmp one time and not need it another May 19 14:32:29 whale postfix/pickup[9588]: 725F08F95500: uid=0 from=<root> May 19 14:32:29 whale postfix/cleanup[10877]: 725F08F95500: message-id=<20090519133229.725F08F95500(a)whale.hindhead.local> May 19 14:32:29 whale postfix/qmgr[3083]: 725F08F95500: from=<root(a)hindhead.local>, size=445, nrcpt=1 (queue active) May 19 14:32:30 whale dovecot: auth(default): new auth connection: pid=10883 May 19 14:32:30 whale postfix/smtpd[10883]: connect from localhost.localdomain[127.0.0.1] May 19 14:32:30 whale postfix/smtpd[10883]: 1E96A8F95501: client=localhost.localdomain[127.0.0.1] May 19 14:32:30 whale postfix/cleanup[10877]: 1E96A8F95501: message-id=<20090519133229.725F08F95500(a)whale.hindhead.local> May 19 14:32:30 whale postfix/qmgr[3083]: 1E96A8F95501: from=<root(a)hindhead.local>, size=906, nrcpt=1 (queue active) May 19 14:32:30 whale postfix/smtpd[10883]: disconnect from localhost.localdomain[127.0.0.1] May 19 14:32:30 whale amavis[9369]: (09369-14) Passed CLEAN, <root(a)hindhead.local> -> <pawel(a)hindhead.local>, Message-ID: <20090519133229.725F08F95500(a)whale.hindhead.local>, mail_id: D3qbEK-TL0Hi, Hits: 0.028, size: 445, queued_as: 1E96A8F95501, 650 ms May 19 14:32:30 whale postfix/smtp[10880]: 725F08F95500: to=<pawel(a)hindhead.local>, relay=127.0.0.1[127.0.0.1]:10024, delay=0.67, delays=0.02/0.01/0/0.65, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as 1E96A8F95501) May 19 14:32:30 whale postfix/qmgr[3083]: 725F08F95500: removed May 19 14:32:30 whale deliver(pawel): Loading modules from directory: /usr/lib64/dovecot/lda May 19 14:32:30 whale deliver(pawel): Module loaded: /usr/lib64/dovecot/lda/lib90_cmusieve_plugin.so May 19 14:32:30 whale deliver(pawel): maildir: data=/home/pawel/Maildir May 19 14:32:30 whale deliver(pawel): maildir++: root=/home/pawel/Maildir, index=, control=, inbox=/home/pawel/Maildir _May 19 14:32:30 whale deliver(pawel): cmusieve: Using sieve path: /home/pawel/.dovecot.sieve May 19 14:32:30 whale deliver(pawel): cmusieve: Executing script /home/pawel/.dovecot.sievec_ May 19 14:32:30 whale deliver(pawel): msgid=<20090519133229.725F08F95500(a)whale.hindhead.local>: saved mail to INBOX May 19 14:32:30 whale postfix/local[10884]: 1E96A8F95501: to=<pawel(a)hindhead.local>, relay=local, delay=0.02, delays=0/0.01/0/0.01, dsn=2.0.0, status=sent (delivered to command: /usr/libexec/dovecot/deliver) May 19 14:32:30 whale postfix/qmgr[3083]: 1E96A8F95501: removed and right after above: May 19 14:33:05 whale postfix/pickup[9588]: 2607F8F95500: uid=501 from=<pawel> May 19 14:33:05 whale postfix/cleanup[10877]: 2607F8F95500: message-id=<20090519133305.2607F8F95500(a)whale.hindhead.local> May 19 14:33:05 whale postfix/qmgr[3083]: 2607F8F95500: from=<pawel(a)hindhead.local>, size=2892071, nrcpt=1 (queue active) May 19 14:33:05 whale postfix/smtpd[10883]: connect from localhost.localdomain[127.0.0.1] May 19 14:33:05 whale postfix/smtpd[10883]: 8DC458F95501: client=localhost.localdomain[127.0.0.1] May 19 14:33:05 whale postfix/cleanup[10877]: 8DC458F95501: message-id=<20090519133305.2607F8F95500(a)whale.hindhead.local> May 19 14:33:05 whale postfix/smtpd[10883]: disconnect from localhost.localdomain[127.0.0.1] May 19 14:33:05 whale postfix/qmgr[3083]: 8DC458F95501: from=<pawel(a)hindhead.local>, size=2899979, nrcpt=1 (queue active) May 19 14:33:05 whale deliver(pawel): Loading modules from directory: /usr/lib64/dovecot/lda May 19 14:33:05 whale deliver(pawel): Module loaded: /usr/lib64/dovecot/lda/lib90_cmusieve_plugin.so May 19 14:33:05 whale deliver(pawel): maildir: data=/home/pawel/Maildir May 19 14:33:05 whale deliver(pawel): maildir++: root=/home/pawel/Maildir, index=, control=, inbox=/home/pawel/Maildir May 19 14:33:05 whale deliver(pawel): maildir++: root=/home/pawel/Maildir, index=, control=, inbox=/home/pawel/Maildir _May 19 14:33:05 whale deliver(pawel): cmusieve: Using sieve path: /home/pawel/.dovecot.sieve May 19 14:33:05 whale deliver(pawel): cmusieve: Executing script /home/pawel/.dovecot.sievec_ *May 19 14:33:05 whale deliver(pawel): creat(/tmp/dovecot.deliver..1242739985.10903.8aa6fa47dffdc26d) failed: Permission denied May 19 14:33:05 whale deliver(pawel): copy: i_stream_read() failed: Permission denied* May 19 14:33:05 whale amavis[9395]: (09395-14) Passed CLEAN, <pawel(a)hindhead.local> -> <pawel(a)hindhead.local>, Message-ID: <20090519133305.2607F8F95500(a)whale.hindhead.local>, mail_id: QY0vutvX3AMN, Hits: -, size: 2896598, queued_as: 8DC458F95501, 449 ms May 19 14:33:05 whale postfix/smtp[10880]: 2607F8F95500: to=<pawel(a)hindhead.local>, orig_to=<pawel>, relay=127.0.0.1[127.0.0.1]:10024, delay=3, delays=2.5/0/0/0.45, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as 8DC458F95501) May 19 14:33:05 whale deliver(pawel): msgid=<20090519133305.2607F8F95500(a)whale.hindhead.local>: save failed to INBOX: Internal error occurred. Refer to server log for more information. [2009-05-19 14:33:05] *May 19 14:33:05 whale deliver(pawel): sieve runtime error: Keep: Generic Error May 19 14:33:05 whale deliver(pawel): sieve_execute_bytecode(/home/pawel/.dovecot.sievec) failed* May 19 14:33:05 whale postfix/local[10884]: 8DC458F95501: to=<pawel(a)hindhead.local>, relay=local, delay=0.07, delays=0.06/0/0/0.01, dsn=4.3.0, status=deferred (temporary failure) May 19 14:33:05 whale postfix/qmgr[3083]: 2607F8F95500: removed cheers

2 1

[Dovecot] ext3/ext4 performance issue
by Timo Sirainen 19 May '09

19 May '09

Wonder if anyone else has actually noticed this and has some kind of statistics? http://marc.info/?t=124234003300001&r=1&w=2

6 8

[Dovecot] Segfault in deliver server
by Sascha Wilde 19 May '09

19 May '09

Hi Timo, Hi list, I finally got along to test the current dovecot 1.2 with our Kolab Server. And I'm very excited to see all the cool ACL and shared name spaces stuff upstream, thanks a lot Timo! Anyway I just stumbled across a new bug using our metadata-plugin (which in turn uses the dict back end): Making a few annotations requests after another it stops working. dovecot.log sais something like: Feb 03 11:58:21 burlywood3 <info> dovecot[10486]: IMAP(4(a)burlywood3.rgb): metadata_get_metadata_entry: dict key=shared//kolab/var/dovecot/spool/4@burlywood3. rgb/home/maildir/.Calendar//vendor/kolab/folder-type Feb 03 11:58:21 burlywood3 <error> dovecot[10486]: child 10503 (dict) killed with signal 11 Feb 03 11:58:21 burlywood3 <error> dovecot[10486]: IMAP(4(a)burlywood3.rgb): read(/kolab/var/dovecot/run/dict-server) failed: Connection reset by peer Feb 03 11:58:21 burlywood3 <critical> dovecot[10520]: Fatal: dup2(3) failed: Bad file descriptor Feb 03 11:58:21 burlywood3 <error> dovecot[10486]: child 10520 (dict) returned error 89 (Fatal failure) Feb 03 11:58:21 burlywood3 <critical> dovecot[10486]: Panic: file ioloop.c: line 38 (io_add): assertion failed: (fd >= 0) (END) I attached gdb to dict and got this: Program received signal SIGSEGV, Segmentation fault. array_idx_modifiable_i (array=0x38, idx=0) at array.c:10 10 pos = idx * array->element_size; (gdb) bt #0 array_idx_modifiable_i (array=0x38, idx=0) at array.c:10 #1 0x0805e9a2 in sql_pool_unlink (ctx=0x80fb670) at sql-pool.c:64 #2 0x0805ea24 in sql_pool_new (pool=0x80f9470, db_driver=0x80dd498 "sqlite", connect_string=0x810ad78 "/kolab/var/dovecot/lib/metadata-dict.sqlite") at sql-pool.c:97 #3 0x0805bb3c in sql_dict_init (driver=0x80f9ae0, uri=0xbfce9f76 "/kolab/etc/dovecot/metadata-dict.conf", value_type=DICT_DATA_TYPE_STRING, username=0x80fb910 "4(a)burlywood3.rgb") at dict-sql.c:86 #4 0x0805c9ca in dict_init (uri=0xbfce9f6f "sqlite:/kolab/etc/dovecot/metadata-dict.conf", value_type=DICT_DATA_TYPE_STRING, username=0x80fb910 "4(a)burlywood3.rgb") at dict.c:87 #5 0x0805a1b1 in dict_client_connection_input (conn=0x80fb8d0) at dict-server.c:407 #6 0x0806637c in io_loop_handler_run (ioloop=0x80f8a80) at ioloop-epoll.c:202 #7 0x080652fd in io_loop_run (ioloop=0x80f8a80) at ioloop.c:338 #8 0x0805a42d in main () at main.c:122 (gdb) li 5 6 void *array_idx_modifiable_i(struct array *array, unsigned int idx) 7 { 8 size_t pos; 9 10 pos = idx * array->element_size; 11 if (pos >= array->buffer->used) { 12 /* index doesn't exist yet, initialize with zero */ 13 buffer_append_zero(array->buffer, pos + array->element_size - 14 array->buffer->used); (gdb) p array $1 = (struct array *) 0x38 (gdb) p *array Cannot access memory at address 0x38 (gdb) up #1 0x0805e9a2 in sql_pool_unlink (ctx=0x80fb670) at sql-pool.c:64 64 next_ctx = SQL_POOL_CONTEXT(ctx->prev); (gdb) p *ctx $2 = {module_ctx = {reg = 0x0}, prev = 0x0, next = 0x810d2b0, pool = 0x80f9470, refcount = 0, key = 0x80fb638 "sqlite\t/kolab/var/dovecot/lib/metadata-dict.sqlite", orig_deinit = 0x805f229 <driver_sqlite_deinit_v>} (gdb) li 59 prev_ctx->next = ctx->next; 60 } 61 if (ctx->next == NULL) 62 ctx->pool->unused_head = ctx->prev; 63 else { 64 next_ctx = SQL_POOL_CONTEXT(ctx->prev); 65 next_ctx->prev = ctx->prev; 66 } 67 ctx->pool->unused_count--; 68 } (gdb) c Continuing. Program terminated with signal SIGSEGV, Segmentation fault. The program no longer exists It's quite possible, that we got any details in the usage of the dict back end wrong, but I guess that in any case the dict server shouldn't segfault... cheers sascha -- Sascha Wilde OpenPGP key: 4BB86568 http://www.intevation.de/~wilde/ http://www.intevation.de/ Intevation GmbH, Neuer Graben 17, 49074 Osnabrück; AG Osnabrück, HR B 18998 Geschäftsführer: Frank Koormann, Bernhard Reiter, Dr. Jan-Oliver Wagner

2 2

[Dovecot] Multiple dovecot versions side-by-side
by Max Ivanov 19 May '09

19 May '09

I'm current maintainer of dovecot packages in ALTLinux distro and I plan to make possible to install multiple dovecot versions side-by-side (1.0, 1.1, 1.2) to make upgrade process easier and more robust. Is there any consequences of doing that? I worry about locking maildirs and mboxes, does dovecot handle it correctly if another dovecot process tries to work on same mail location?

2 1

[Dovecot] LDA and postfix with recipient delimiter: documentation
by John Fawcett 18 May '09

18 May '09

Just a comment about the documentation for postfix integration when using receipient delimiter and delivery of user+foo(a)domain.ext to user@domain: http://wiki.dovecot.org/LDA/Postfix I had some issues to get this working, so thought I'd share my experience. Dovecot version 1.2.rc3. Postfix version postfix-2.7-20090511. I have no local (unix) mailboxes, everything is delivered to dovecot, so in postfix I have set mailbox_transport = dovecot. In this case the following syntax taken from the docs does not work: dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -f ${sender} -d ${user}@${nexthop} whereas the following does work: dovecot unix - n n - - pipe flags=DRhu user=vmail:mail argv=/usr/lib/dovecot/deliver -f ${sender} -d ${user}@${domain} I think that ${domain} is always what is wanted and only when ${nexthop} happens to have the same value as ${domain} - for example when using a transport table entry like this: /etc/postfix/transport domain.ext dovecot: will the ${user}@${nexthop} form be deliverable. Can anyone see a reason for not using always ${user}@${domain} instead of ${user}@${nexthop}? John

5 6

[Dovecot] dovecot 2.0 (revision 9271:d467712aee77) compile problems on AIX 5.3
by Jonathan Siegle 18 May '09

18 May '09

Having some problems compiling on AIX 5.3 with IBM vac version 8. Programs that I had problems building: test-mail test-imap test-index To fix the undefined symbols problem: ld: 0711-317 ERROR: Undefined symbol: .charset_to_utf8_end ld: 0711-317 ERROR: Undefined symbol: .charset_to_utf8_begin ld: 0711-317 ERROR: Undefined symbol: .charset_to_utf8 ld: 0711-317 ERROR: Undefined symbol: .charset_is_utf8 ld: 0711-317 ERROR: Undefined symbol: .charset_to_utf8_str ld: 0711-317 ERROR: Undefined symbol: .message_header_decode_utf8 ld: 0711-317 ERROR: Undefined symbol: .rfc822_parser_init ld: 0711-317 ERROR: Undefined symbol: .rfc822_skip_lwsp ld: 0711-317 ERROR: Undefined symbol: .rfc822_parse_content_type ld: 0711-317 ERROR: Undefined symbol: .rfc2231_parse ld: 0711-317 ERROR: Undefined symbol: .rfc822_parse_mime_token ld: 0711-317 ERROR: Undefined symbol: .rfc822_parse_atom ld: 0711-317 ERROR: Undefined symbol: .message_address_parse ld: 0711-317 ERROR: Undefined symbol: .iconv ld: 0711-317 ERROR: Undefined symbol: .iconv_open ld: 0711-317 ERROR: Undefined symbol: .iconv_close I add this ../lib-charset/.libs/libcharset.a -liconv to the Makefiles (./src/lib-imap/Makefile;./src/lib-index/Makefile;./src/lib-mail/ Makefile) below: $ find . -name Makefile -exec egrep -p libcharset.a {} \; -print clean-noinstPROGRAMS: @list='$(noinst_PROGRAMS)'; for p in $$list; do \ f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ echo " rm -f $$p $$f"; \ rm -f $$p $$f ; \ done test-imap$(EXEEXT): $(test_imap_OBJECTS) $(test_imap_DEPENDENCIES) @rm -f test-imap$(EXEEXT) $(LINK) $(test_imap_LDFLAGS) $(test_imap_OBJECTS) $ (test_imap_LDADD) $(LIBS) \ ../lib-mail/.libs/libmail.a ../lib-charset/.libs/libcharset.a -liconv ./src/lib-imap/Makefile clean-noinstPROGRAMS: @list='$(noinst_PROGRAMS)'; for p in $$list; do \ f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ echo " rm -f $$p $$f"; \ rm -f $$p $$f ; \ done test-index$(EXEEXT): $(test_index_OBJECTS) $(test_index_DEPENDENCIES) @rm -f test-index$(EXEEXT) $(LINK) $(test_index_LDFLAGS) $(test_index_OBJECTS) $ (test_index_LDADD) $(LIBS) ../lib-charset/.libs/libcharset.a -liconv ./src/lib-index/Makefile clean-noinstPROGRAMS: @list='$(noinst_PROGRAMS)'; for p in $$list; do \ f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ echo " rm -f $$p $$f"; \ rm -f $$p $$f ; \ done test-mail$(EXEEXT): $(test_mail_OBJECTS) $(test_mail_DEPENDENCIES) @rm -f test-mail$(EXEEXT) $(LINK) $(test_mail_LDFLAGS) $(test_mail_OBJECTS) $ (test_mail_LDADD) $(LIBS) ../lib-charset/.libs/libcharset.a -liconv ./src/lib-mail/Makefile Then compilation occurs fine. Thanks! Jonathan

2 4

[Dovecot] How to manage Seen flags via sieve?
by Max Ivanov 18 May '09

18 May '09

I use public namespace for group mailboxes. If someone sends email from this mailbox , MTA detects it and delivers copy of that message to mailbox/Sent folder, to keep history of all messages available for every group member. I'd like to set Seen flag on all messages that dovecots deliver puts into "Sent" folder. Is it posible somehow?

2 1

[Dovecot] 1.1.13 squat core dump
by David Halik 18 May '09

18 May '09

While using 1.1.13 and squat with local pine imap on Solaris 9 I had a random core dump today. I was doing a search in a maildir folder with about 2000 emails. Unfortunately, I haven't been able to reproduce it yet, but I wanted to send along the info anyways. Environment: # uname -a SunOS 5.9 Generic_122300-39 sun4u sparc SUNW,Sun-Blade-100 Backtrace: http://pastebin.com/f7aa8bb5 ~# dovecot -n # 1.1.13: /usr/local/etc/dovecot.conf # OS: SunOS 5.9 sun4u protocols: imap imaps pop3 pop3s ssl_disable: yes disable_plaintext_auth: no login_dir: /usr/local/var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_greeting_capability(default): yes login_greeting_capability(imap): yes login_greeting_capability(pop3): no mail_location: maildir:~/Maildir:INDEX=/heroes/u1/dovecot-index/sparc/index/%u:CONTROL=/heroes/u1/dovecot-index/control/%u mmap_disable: yes mail_nfs_storage: yes mail_nfs_index: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota fts fts_squat mail_plugins(imap): quota imap_quota fts fts_squat mail_plugins(pop3): quota mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 pop3_uidl_format(default): %08Xu%08Xv pop3_uidl_format(imap): %08Xu%08Xv pop3_uidl_format(pop3): UID%u-%v namespace: type: private separator: . prefix: INBOX. inbox: yes list: yes subscriptions: yes auth default: passdb: driver: pam args: * userdb: driver: passwd plugin: quota: fs fts: squat fts_squat: partial=4 full=4 -- ================================ David Halik System Administrator OIT-CSS Rutgers University dhalik(a)jla.rutgers.edu ================================

5 14

Re: [Dovecot] LDA and postfix with recipient delimiter: documentation
by john.ml＠erba.tv 18 May '09

18 May '09

> Hi John, > no i didnt wrote that, i only have user(a)domain.ext > layout in use currently in my test servers > > -- > Best Regards > > MfG Robert Schetterer > > Germany/Munich/Bavaria > Hi Robert I probably didn't make it clear. The problem with the published syntax is that it does not work for receipient delimiter and delivery to mailbox, except as far as I can see when next_hop is the same as domain, which is not always the case. I think that the documentation should report the syntax with ${domain} instead of ${next_hop}, unless there's something I'm missing, since this should always work. thanks again John

2 1

[Dovecot] migration and conversion from courier
by Giuliano Gavazzi 18 May '09

18 May '09

Dear all, back in January I posted about migration from courier and in particular on the script courier-dovecot-migrate.pl. That script had a bug on BSD (or should I say not-Linux?) type systems*. On FreeBSD (6.1) and MacOSX (10.5) it appended a lot of binary garbage at the end of dovecot-keywords files. On a couple of systems I had not actually run the script with the -- convert option, as I had misunderstood the procedure, so those systems, ironically, are the ones that I migrated better... Now to the issue. My final question at the time was (http://dovecot.org/pipermail/dovecot/2009-January/036292.html) can one delete the dovecot-keywords and rerun the script (leaving alone the dovecot-uidlist)? There is a problem if this cannot be done, as those files have the following structure: 0 flag0 1 flag1 ... m binary garbage [optionally followed by more lines like the last] and if a new keyword is added, the file ends up like (this is copy and paste example): 0 JunkRecorded 1 $NotJunk 2 $Junk 3 Redirected 4 ^A<F0># 5 <B0><96># 6 $Forwarded It does not look like a nice thing to me. I doubt though that the script will cope with flags correctly, as in principle will get the flags from an out of date courierimapkeywords, thus missing any new ones. Perhaps the only solution is to have a new script that deletes the garbage lines and renumbers the following ones, so that the above example would become: 0 JunkRecorded 1 $NotJunk 2 $Junk 3 Redirected 4 $Forwarded and then renames all *g files to *e. Thoughts? Giuliano * This bug was fixed back then by Timo who replaced the script on the site http://www.dovecot.org/tools/courier-dovecot-migrate.pl. But there's no note of the change on the site nor was an announcement made to the list, AFAIK.

2 4

[Dovecot] Quota over NFS
by Flavio Costa 18 May '09

18 May '09

I have accidentaly reply only to Timo, so I'm forwarding to discussion back to the list. Sorry! ---------- Forwarded message ---------- From: Timo Sirainen <tss(a)iki.fi> Date: Mon, May 11, 2009 at 3:12 PM Subject: Re: [Dovecot] Quota over NFS To: Flavio Costa <flavio.cdc(a)gmail.com> On Mon, 2009-05-11 at 15:03 -0300, Flavio Costa wrote: > I get that the server doesn't reply correctly to Dovecot, but the > thing is: why does the LDA works properly? > > May 6 13:15:35 SERVER_NAME deliver(USER_TO): > msgid=<eb4d7eac0905060915y130b9af6i93567e198659d5f7(a)mail.gmail.com>: rejected: Not enough disk space Because it's the NFS server that enforces the quota here. You'd get this error even if you didn't load quota plugin at all. Also note that it's saying "Not enough disk space", not "Quota exceeded" which is the error message from Dovecot v1.0's quota plugin. > And yet, why does 'quota <user>' replies correctly and Dovecot > doesn't? Looking at quota-tools sources, it seemed to ignore the active-check entirely. So I don't know if Dovecot should ignore it too.. > They all obtain the info from the rpc.rquotad running on the > fileserver, right? Yeah. -- Flávio Coutinho da Costa

2 8

[Dovecot] expire plugin error
by Michael Lechtermann 18 May '09

18 May '09

Hi, I am using the db backend for the expire plugin and found the following error message in the logfile: dovecot: Jan 22 10:10:55 Error: dict: secondary db: unable to allocate space from the buffer cache dovecot: Jan 22 10:10:55 Error: dict: Failed to initialize dictionary 'expire' dovecot: Jan 22 10:10:55 Error: IMAP(xxxxxxxxxx): read(/var/dovecot/dict-server) failed: Remote disconnected Anyone know how to fix this? I do not want to use SQL as backend, that would be overkill. # ls -alFh /var/dovecot/dict-server srwxrwxrwx 1 root wheel - 0B Jan 22 10:08 /var/dovecot/dict-server= # dovecot -n # 1.1.8: /etc/dovecot.conf # OS: OpenBSD 4.4 sparc64 ffs base_dir: /var/dovecot/ log_path: /var/log/dovecot.log protocols: imaps pop3s listen: xxxxxxxxxxxx ssl_ca_file: /etc/ssl/xxxxxxxxxxxx.ca ssl_cert_file: /etc/ssl/xxxxxxxxxxxx.crt ssl_key_file: /etc/ssl/private/xxxxxxxxxxxx.key login_dir: /var/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_user: _dovecot mail_max_userip_connections(default): 25 mail_max_userip_connections(imap): 25 mail_max_userip_connections(pop3): 5 first_valid_uid: 10000 last_valid_uid: 19999 first_valid_gid: 100 last_valid_gid: 100 mail_gid: 100 mail_location: mbox:/var/data/mail/%u/mbox:INBOX=/var/data/mail/%u/mbox/inbox:INDEX=/var/dovecot/index/%u mbox_write_locks: fcntl mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugins(default): expire imap_quota quota trash zlib mail_plugins(imap): expire imap_quota quota trash zlib mail_plugins(pop3): expire quota zlib mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: passdb: driver: bsdauth userdb: driver: passwd socket: type: listen master: path: /var/run/dovecot/auth-master mode: 384 plugin: quota: fs:user:noenforcing:mount=/var/data trash: /etc/dovecot-trash.conf expire: Trash 14 expire_dict: proxy:/var/dovecot/dict-server:expire dict: expire: db:/var/lib/dovecot/expire.db

3 5

[Dovecot] pine vs dovecot-zlib (mbox.gz)
by Darabos Edvárd Konrád 18 May '09

18 May '09

Hello! Always reproducible pine vs dovecot-imap-mbox.gz scene has weird errors. - Initial message is OK: [Folder "SAVE.gz" opened with 211 messages READONLY] - Some mails at the end are listed correctly, others are listed with empty sender/size/subject (just numbering). - All mails have no bodies. Full header command produces total blank screen. Even before any error message. Error messages appear during navigation: [{localhost/imap/user="nil"}SAVE.gz : Missing IMAP reply key: )] [MAIL FOLDER "SAVE.gz" CLOSED DUE TO ACCESS ERROR] Seamonkey works with both mbox-es and mbox.gz-s. Mbox-es are working with both SeaMonkey and pine. Technical environment description follows... Thanks, Nil. PS: Tried to gzip other folder, same results. -- 8< -- Dovecot version: 1.0.15 Linux version 2.6.26-1-amd64 (Debian 2.6.26-13) (waldi(a)debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 17:57:00 UTC 2009 Debian GNU/Linux 5.0 (lenny) Filesystem: ext3 -- 8< -- ~/.pinerc (all other lines are comments or equal to nothing) smtp-server=localhost inbox-path={localhost}INBOX default-fcc={localhost}Sent feature-list=enable-full-header-and-text, enable-full-header-cmd, enable-8bit-esmtp-negotiation, enable-8bit-nntp-posting character-set=utf-8 folder-collections=IMAP {localhost}[] last-time-prune-questioned=109.2 last-version-used=5.10 ssh-path=/usr/local/bin/imapd.sh color-style=use-termdef current-indexline-style=flip-colors titlebar-color-style=default normal-foreground-color=255,255,255 normal-background-color=000,000,000 meta-message-foreground-color=255,255,255 meta-message-background-color=000,000,255 index-opening-foreground-color=000,000,000 index-opening-background-color=000,255,255 -- 8< -- /usr/local/bin/imapd.sh (just tried to redirect server stderr, did not helped): #!/bin/bash /usr/lib/dovecot/imap 2> /dev/null -- 8< -- # 1.0.15: /etc/dovecot/dovecot.conf Warning: mail_extra_groups setting was often used insecurely so it is now deprecated, use mail_access_groups or mail_privileged_group instead log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3s listen(default): localhost listen(imap): localhost listen(pop3): * ssl_listen: * login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_extra_groups: mail mail_access_groups: mail mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugins: zlib mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv auth default: passdb: driver: pam userdb: driver: passwd -- 8< --

2 2

[Dovecot] expire plugin + dovecot 1.1.7
by Georg Käfer 18 May '09

18 May '09

Hi, testing expire plugin I get an error message "User lookup failed": /usr/sbin/dovecot --exec-mail ext /usr/libexec/dovecot/expire-tool -test Error: userdb(lukas(a)manual.at) didn't return uid Info: User lookup failed: lukas(a)manual.at Info: gkaefer2(a)manual.at/INBOX.Sent: stop, expire time in future: Wed Mar 31 14:38:33 2010 Reviewing the expires database I see simmilar entries like for gkaefer2(a)manual.at (which is working) lukas(a)manual.at/INBOX.Trash 1241181173 lukas(a)manual.at/INBOX 1270238935 lukas(a)manual.at/INBOX.Sent 1271417514 Dovecot -n # 1.1.7: /etc/dovecot/dovecot.conf # OS: Linux 2.6.26-gentoo-r3 i686 Gentoo Base System release 1.12.11.1 ext3 syslog_facility: local0 protocols: pop3 pop3s imap imaps ssl_cert_file: /etc/ssl/dovecot/xxx.pem ssl_key_file: /etc/ssl/dovecot/xxx.key disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login login_process_per_connection: no login_greeting_capability(default): yes login_greeting_capability(imap): yes login_greeting_capability(pop3): no login_process_size: 128 login_processes_count: 10 login_max_processes_count: 256 mail_max_userip_connections(default): 10 mail_max_userip_connections(imap): 10 mail_max_userip_connections(pop3): 30 first_valid_uid: 8 last_valid_uid: 8 first_valid_gid: 12 last_valid_gid: 12 mail_privileged_group: mail mail_uid: mail mail_gid: mail mail_location: maildir:/var/mail/%d/%n/Maildir/:INDEX=/var/mail/%d/%n/indexes mail_debug: yes mail_full_filesystem_access: yes mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota trash expire mail_plugins(imap): quota imap_quota trash expire mail_plugins(pop3): quota expire mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 imap_client_workarounds(default): outlook-idle delay-newmail imap_client_workarounds(imap): outlook-idle delay-newmail imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: mechanisms: plain login verbose: yes debug: yes debug_passwords: yes passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: prefetch userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: mail group: mail plugin: quota: maildir:User quota quota_rule: *:storage=500M quota_rule2: *:messages=5000 quota_rule3: Trash:storage=10%% quota_rule4: Spam:storage=20%% quota_warning: storage=90%% /usr/bin/quota-warning.sh 90 quota_warning2: storage=70%% /usr/bin/quota-warning.sh 70 quota_warning3: messages=70%% /usr/bin/quota-warning.sh 70 trash: /etc/dovecot/dovecot-trash.conf expire: Trash 30 Trash/* 30 INBOX.Trash 30 Spam 30 Junk-E-Mail 30 INBOX.Sent 365 Sent 365 INBOX 365 expire_dict: proxy::expire dict: expire: mysql:/etc/dovecot/dovecot-dict-expire.conf dovecot-dict-expire.conf: connect = host=localhost dbname=postfixadmin user=postfixadmin password=xxx # dovecot v1.1 only: table = expires select_field = expire_stamp where_field = mailbox username_field = not_used and users home (lukas@] ls -ltra shows: -rw------- 1 mail mail 0 Mar 31 10:25 dovecot-uidvalidity.49d1d387 drwx------ 4 mail mail 4096 Mar 31 10:25 .. -rw------- 1 mail mail 36 Mar 31 11:53 subscriptions -rw------- 1 mail mail 8 Mar 31 14:31 dovecot-uidvalidity drwx------ 5 mail mail 4096 Apr 1 14:33 .INBOX.Trash drwx------ 2 mail mail 4096 Apr 2 22:09 tmp -rw------- 1 mail mail 161 Apr 2 22:09 dovecot-uidlist drwx------ 2 mail mail 4096 Apr 3 13:42 new drwx------ 2 mail mail 4096 Apr 3 13:42 cur drwx------ 8 mail mail 4096 Apr 16 11:32 . drwx------ 5 mail mail 4096 Apr 16 11:35 .INBOX.Drafts -rw------- 1 mail mail 64 Apr 16 13:31 maildirsize drwx------ 5 mail mail 4096 Apr 22 12:44 .INBOX.Sent any idea what is causing the "didn't return uid" / "User lookup failed:" ? many thanks, Liebe Gruesse Georg Kaefer

2 1

[Dovecot] dovecot 1.2 plugin virtual and shared namespace with thunderbird
by Robert Schetterer 18 May '09

18 May '09

Hi Timo, using latest dovecot 1.2 and latest thunderbird i noticed if using virtual plugin like here with mysql http://wiki.dovecot.org/Plugins/Virtual everthing works like expected until i add a shared namespace Tb then looses its subscriptions under imap to the private namespace only the shared namespace gets shown up , any idea? I dont see something special in the logs why this happens -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

2 16