- dovecot - dovecot.org

[Dovecot] Security hole #2: Off-by-one buffer overflow with mmap_disable=yes
by Timo Sirainen 19 Nov '06

19 Nov '06

Version: 1.0test53 .. 1.0.rc14 (ie. all 1.0alpha, 1.0beta and 1.0rc versions so far). 0.99.x versions are safe (they don't even have mmap_disable setting). Problem: When mmap_disable=yes setting is used, dovecot.index.cache file is read to memory using "file cache" code. It contains a "mapped pages" bitmask buffer. In some conditions when updating the buffer it allocates one byte too little. Exploitability: I think it's going to be pretty difficult to cause anything else than a crash, but I wouldn't say impossible. Only logged in IMAP/POP3 users can exploit this. In theory you might be able to exploit this for other users as well by sending them a lot of specially crafted emails, but this requires knowing what dovecot.index.cache file contains. Normally its contents can't be predicted, although perhaps with POP3 users it gets empty often enough that the exploit could be tried. Then again, the exploit requires having at least 4MB cache file, which won't happen with POP3 users before the mailbox has about 170k mails (if I counted right). With IMAP the cache file is used more, so it's easier to fill the 4MB with for example a lot of To-headers. Workaround: Use INDEX=MEMORY so the cache files aren't used at all. Fix: 1.0.rc15 fixes this. You can also use this patch: http://dovecot.org/patches/1.0/file-cache-buffer-overflow-fix.diff

1 0

[Dovecot] I/O leak
by Jim Horner 19 Nov '06

19 Nov '06

I upgraded from rc12 to rc14 last night... sifting through the logs I noticed the following. I point this out since it appears dovecot is in high gear bug-fix mode. This issue is not big for me; I rarely stop dovecot. My init.d script for dovecot is basically stop) killall dovecot imap-login I am guessing there might be a more graceful way to stop dovecot? Or rc14 fixed this? I see in rc14 changelog: - rc13 crashed if client disconnected while IDLEing but only user1 was IDLE. Nov 15 21:53:23 myserver dovecot: IMAP(user1(a)arinbe.com): Disconnected in IDLE Nov 15 21:53:23 myserver dovecot: imap-login: Killed with signal 15 Nov 15 21:53:23 myserver dovecot: IMAP(user2(a)arinbe.com): Disconnected Nov 15 21:53:23 myserver dovecot: imap-login: Killed with signal 15 Nov 15 21:53:23 myserver dovecot: IMAP(user3(a)arinbe.com): Disconnected Nov 15 21:53:23 myserver dovecot: imap-login: Killed with signal 15 Nov 15 21:53:23 myserver dovecot: I/O leak: 0x804d7a0 (17) Nov 15 21:53:23 myserver dovecot: I/O leak: 0x804d7a0 (15) Nov 15 21:53:23 myserver dovecot: I/O leak: 0x804d7a0 (19) Nov 15 21:53:30 myserver postfix/master[31974]: terminating on signal 15 Nov 15 21:54:02 myserver dovecot: Dovecot v1.0.rc14 starting up Jim

2 2

[Dovecot] 1.0.rc14 released
by Timo Sirainen 19 Nov '06

19 Nov '06

http://dovecot.org/releases/dovecot-1.0.rc14.tar.gz http://dovecot.org/releases/dovecot-1.0.rc14.tar.gz.sig More fixes. "Duplicate header extension keywords" is the only known problem (or if I forgot something, remind me). I'll try to figure out a way to reproduce it easily and then get it fixed. * LDAP: Don't try to use ldap_bind() with empty passwords, since Windows 2003 AD skips password checking with them and just returns success. * verbose_ssl=yes: Don't bother logging "syscall failed: EOF" messages. No-one cares about them. + Dovecot sources should now compile without any warnings with gcc 3.2+ - rc13 crashed if client disconnected while IDLEing - LDAP: auth_bind=yes fixes - %variables: Fixed zero padding handling and documented it. %0.1n shouldn't enable it, and it really shouldn't stay for the next %variable. -sign also shouldn't stay for the next variable. - Don't leak opened .log.2 transaction logs. - Fixed a potential hang in IDLE command (probably really rare). - Fixed potential problems with client disconnecting while master was handling the login. - quota plugin didn't work in Mac OS X

4 7

[Dovecot] quota plugin enhancement request
by Michael Tibben 19 Nov '06

19 Nov '06

Hi am having a small issue with the quota plugin In Squirrelmail when a message is deleted, it seems to be copied to the Trash folder *before* it is deleted from the current folder. However if it is a large message being deleted and the mailbox is close to its quota limit, it means dovecot will deny the copy operation as the quota will be exceeded if the message is copied Because of this, I am wondering if it is possible to have an option for the quota plugin to track, but not enforce the quota. This is because I don't require quota enforcement on IMAP, as Postfix will enforce quota on incoming mail anyway. I hope this makes sense... Michael

5 6

[Dovecot] Is "Resource temporarily unavailable" an old problem?
by Ricardo Dias Campos 19 Nov '06

19 Nov '06

Hi. I've installed dovecot recently in a Fedora 5 Linux. It seemed to be OK but I begun to get the message "Can't connect to auth server at default: Resource temporarily unavailable". When I get the message, dovecot hangs. The problem is that "temporarily" is not quite true since the only way to get dovecot running again is to restart it. As a matter of fact, I cannot say that it never recovers. What I know is that it is out for a long, long time. Then a new problem arose: the time between hang-ups begun to diminish. Trying to find why I discovered that the number or dovecot-auth processes was too high (last time I got 169 processes, a lot of them <defuncts>). It seems that, if I kill all these processes, it takes more time before it hangs again. I looked up for messages in the Internet and I found a mail exchange between people from this list. The first hint I got was to upgrade dovecot. As I said, I'm using Fedora 5 and the version distributed with it was dovecot-1.0-0.beta2.7.i386. I upgraded it to dovecot-1.0-0.beta8.2.fc5.i386. I couldn't make any direct relantionship between this versions and the ones in dovecot site so I cannot tell what dovecot version I'm using in terms of dovecot site versioning. Any help is welcome. Thanks, Ricardo

3 3

[Dovecot] CHANGE REQUEST: Move config files out of main $sysconfdir
by Brian G. Peterson 19 Nov '06

19 Nov '06

Currently, dovecot places it's config files in $sysconfdir In Makefile.am, this is defines as: confdir = $(sysconfdir) It would be far more friendly to an already overloaded /etc/ directory, and easier to locate the files, to follow the now-common convention and place files in $sysconfdir / dovecot / ... on most systems this would mean: /etc/dovecot/ If there is only a dovecot.conf, it doesn't really matter, but when additional config files get added for ldap, sql, sieve, it starts to add up. Some distributions already make this change, but placing this change in the dovecot core would make it unnecessary for downstream packagers to make a change to the core dovecot distribution files. Regards, - Brian

3 2

Re: [Dovecot] NTLM authentication from Outlook
by Lars Skovgaard 19 Nov '06

19 Nov '06

> Hi all > > I've enabled ntlm authentication in dovecot, and use dovecot sasl in > postfix as well. > > Authentication with ntlm works well from Mac OS X Mail.app, as well > as from Outlook Express, but fails with Outlook. Strangely enough, > ntml authentication works in Outlook when using smtp (via postfix), > but neither from imap or pop3 (both dovecot). As dovecot sasl handles > all authentication against a mysql userdb, this strikes me as very > strange. > > I've instructed my clients with Outlook to fetch mail using a ssl- > encrypted connection, and to send using ntlm-authentication. This > works, but I would like to have ntlm available as an option to all my > clients, without forcing them to change mail-clients. > > I've turned on auth_verbose, auth_debug and auth_debug_passwords, and > compared the passwordstring with the one calculated using dovecotpw, > and they match. The only odd thing is that the username is returned > from Outlook as an all-caps string, so user(a)domain.tld becomes > USER(a)DOMAIN.TLD. I don't know if it matters, but I don't think so, as > changing the user-login to an all-caps version doesn't solve the > problem. > > Any hints will be most welcome. > > /Lars Greetings, everyone I'm sorry, but I seem to have made a mistake regarding the passwordstring from Outlook – seems like the string I looked at was from MS Entourage... (that's what you get from trying to debug something when you're too tired to think straight). I've now enabled debugging again, and have tried logging in from Outlook with ntlm-authentication. The log-entries are as follows: Nov 16 23:29:09 SD-Server dovecot: auth(default): client in: AUTH 1 NTLM service=IMAP lip=192.168.2.2 rip=192.168.2.13 Nov 16 23:29:09 SD-Server dovecot: auth(default): client out: CONT 1 Nov 16 23:29:09 SD-Server dovecot: auth(default): client in: CONT 1 TlRM7IIog0ADQAuAAAFASgKAAAAD0AABgATVNTUAABYUEFSQkVKRFNHUlVQUAAAABGACgAAA lNQUNEU= Nov 16 23:29:09 SD-Server dovecot: auth(default): client out: CONT 1 TlRMTVNAAAAFAHgAeAAAAAAAADAA +H1XooTUAACAAAAyZ9yMNkAAdgBlAHIALgBsAG8AACYAJgBOAAAAUwBEAC0AUwBlAHIAYwBh AGwAAwAeAFMAyAC4AbABvsAAAAAGMAYRAAtAFMAZQByAHYAZQBQBAAA= Nov 16 23:29:09 SD-Server dovecot: auth(default): client in: CONT 1 TlRMAYAHwAAAAYABgAlAAAAAwADTVNTUAFQAAAAMAAAAAAAAEAH3ZyprYRPWIAAAAAAcgBkA EkATQBBAEMAWABQAAAAACsAAADAAAAGAABIAqMx1XpiwbAAAHAAcwAcABQNAEEAQwBYAFAAT ABpAHMAYQAgAFMAawBvAHYAZwBhAGAAAAAKIAgUBKAoAAAAPSQBAAAAAAAAAAAJILBz4x4RA Ixsp2rhFi8VB6g== Nov 16 23:29:09 SD-Server dovecot: auth(default): ntlm(?, 192.168.2.13): Username contains disallowed characters Nov 16 23:29:10 SD-Server dovecot: auth(default): client out: FAIL 1 The same account logs in without problems if I use a plaintext password (SSL-encrypted, since plaintext-login is disabled). in dovecot.conf I have the following: auth default { mechanisms = plain digest-md5 cram-md5 ntlm rpa } The authentication is done against a mysql-db, which until now has worked with every client I've tested (except Outlook). I have set up postfix to use dovecot-sasl, and use the same userdb for smtp-authentication. Strangely enough the exact same data is accepted when using ntml-authentication with smtp, though a warning is added to my logs. This is an example of a log-entry from an Outlook-user sending a mail: Nov 14 16:40:49 SD-Server postfix/smtpd[8354]: connect from unknown [hid.den.ip.adr] Nov 14 16:40:49 SD-Server dovecot: auth-worker(default): mysql: Connected to localhost (dovecot_auth) Nov 14 16:40:51 SD-Server postfix/smtpd[8354]: warning: unknown [hid.den.ip.adr]: SASL NTLM authentication failed: TlRMTVNTUAACAAMAZYAAQByAHAFAooAOINYZ// +97QAAAAAAAAUwBEAC0AUwBlAHIAdgBlAHIALgBsAG8AYwBhAGwAAwAeAFMARAAtAFAbABvA GMAYAAAAHgAeADAQAAAAAACYAJgBOBZQByAC4sAAAAAAA= Nov 14 16:40:51 SD-Server postfix/smtpd[8354]: AC6402D668E: client=unknown[hid.den.ip.adr], sasl_method=NTLM, sasl_username=user(a)domain.dk Nov 14 16:40:51 SD-Server postfix/cleanup[8358]: AC6402D668E: message- id=<006a01c70803$4dcd1b00$0200a8c0@acerce5220052b> Nov 14 16:41:13 SD-Server postfix/qmgr[8494]: AC6402D668E: from=<user(a)domain.dk>, size=819330, nrcpt=1 (queue active) Nov 14 16:41:16 SD-Server postfix/smtpd[8354]: disconnect from unknown [hid.den.ip.adr] Nov 14 16:41:29 SD-Server postfix/smtp[8361]: AC6402D668E: to=<user(a)otherdomain.dk>, relay=smtp.domain.dk[hid.den.ip.adr]:25, delay=37, delays=22/0.08/0.06/15, dsn=2.0.0, status=sent (250 156794624 mailfe12 Message accepted for delivery) Nov 14 16:41:29 SD-Server postfix/qmgr[8494]: AC6402D668E: removed The same warning is issued from postfix when a user sends mail from Outlook Express, but not when the same user sends from Thunderbird or Mail.app. In fact, I've only seen these problems when the users are using MS products. I really hope someone can shed some light on what is going on. Best regards Lars

2 1

[Dovecot] dovecot:IMAP(user) killed with signal 6
by Spil Oss 18 Nov '06

18 Nov '06

Hi all, After rc10 I have problems with imap and imaps Hi all, After rc10 I have problems with imap and imaps Nov 16 15:42:39 beastie dovecot: IMAP(user1): open(/home/user1/Maildir/.MeldWelSpam/dovecot-keywords) failed: Permission denied Nov 16 15:44:09 beastie dovecot: IMAP(user2): open(/home/user2/Maildir/.MeldWelSpam/dovecot-keywords) failed: Permission denied Nov 16 15:44:09 beastie dovecot: IMAP(user2): file maildir-keywords.c: line 222 (maildir_keywords_lookup_or_create): assertion failed: (mk->synced) Nov 16 15:44:09 beastie dovecot: child 98798 (imap) killed with signal 6 Nov 16 15:46:10 beastie dovecot: IMAP(user2): open(/home/user2/Maildir/.MeldWelSpam/dovecot-keywords) failed: Permission denied Nov 16 15:46:10 beastie dovecot: IMAP(user2): file maildir-keywords.c: line 222 (maildir_keywords_lookup_or_create): assertion failed: (mk->synced) Nov 16 15:46:10 beastie dovecot: child 98819 (imap) killed with signal 6 The Permission denied messages where there in rc10 as well, but that was not causing problems. These folders are symlinks to shared spam and ham folders for spamassassin learning. Any clue on how to fix this? FreeBSD-i386 6.1-RELEASE-p10 dovecot-1.0.r13 from ports Kind regards, Spil.

3 3

[Dovecot] updated gentoo ebuild provides dovecot-sieve
by Brian G. Peterson 18 Nov '06

18 Nov '06

I'm hoping that there are some Gentoo users on this list who will chime in on a bug that is near and dear to my heart. We've created an updated Gentoo ebuild that adds a sieve USE flag and builds dovecot-sieve if the use flag is enabled. The gentoo bug is here: https://bugs.gentoo.org/show_bug.cgi?id=141743 and the ebuild is available as an attachment to that bug, or as a patch attachment (in case you're not running rc14, or just prefer the look of a unified diff) Any gentoo users on this list are urged to install from the ebuild/patch on the bug, and *report back* on the bug or this list, so that the Gentoo dev will know that it's safe to add this to portage CVS. Thank You. Regards, - Brian

2 1

[Dovecot] Dovecot LDA, LDAP, Postfix and Spawning programs..
by Jorgen Lundman 18 Nov '06

18 Nov '06

Qmail, when using LDAP, a user can specify delvieryProgramPath, or a .qmail file, to launch something like procmail. Qmail correctly setuid() to the uids set for the user in LDAP, as well as set up the common env vars (HOME, USER, MAILDIR). We moved to Postfix but found that it is quite lacking in the features supported when it comes to "virtual" users. No .forward, and if you set up an alternate transport, they are run as "any user but root, nor postfix, nor the virtual-user's uid". And worse, does not even supply the HOME/MAILDIR values to transport delivery plugin. (Forcing it to getpwnam() or similar). I have an option to make my own setuid program to query LDAP (postmap -q would work), setuid() and call, say, procmail. It has been suggested I can use "maildrop" as it can talk to LDAP. However, I picked "Dovecot" as my pop3/imap program due to an irrational dislike of Courier imap. So, if I tried Dovecot-LDA, would it support the user optionally having a ".forward" file, or perhaps the LDAP attribute deliveryProgramPath, or some other way to filter based on subject/body to sort, and/or forward, mail? If it can use LDAP, will it setuid() to the users uid (as set in LDAP, assuming I cook the LDAP conf entries correctly) when delivering(I'd hope so!) and running external filters? I am still running rc10, which works well but flips out regularly. (Previously mentioned 'too many files open' bug, some leaks in locks) I will upgrade when the LDAP changes are deemed stable. Lund -- Jorgen Lundman | <lundman(a)lundman.net> Unix Administrator | +81 (0)3 -5456-2687 ext 1017 (work) Shibuya-ku, Tokyo | +81 (0)90-5578-8500 (cell) Japan | +81 (0)3 -3375-1767 (home)

2 1

[Dovecot] Failed Assert in RC13 on FC4
by Joseph D. Wagner 18 Nov '06

18 Nov '06

I received the following notices from logwatch: dovecot: IMAP(userid): file ioloop.c: line 22 (io_add): assertion failed: (fd >= 0): 1 Time(s) dovecot: child 16976 (imap) killed with signal 6: 1 Time(s) Please let me know if you need any further information from me. Joseph D. Wagner

2 1

[Dovecot] two assertion failures
by Mikhail Teterin 18 Nov '06

18 Nov '06

Hello! I was able to overcome the earlier-reported problems (of dovecot treating the standard mailboxes in /var/mail/ as directories) by specifying mail_location (continuing to use the 0.99-era dovecot.conf did not work). Then I started seeing assertion-failures like: file istream-raw-mbox.c: line 499 (istream_raw_mbox_get_body_size): assertion failed: (rstream->mail_size != (uoff_t)-1) these disappeared, when I disabled mmap-access (mmap is limited to 1Gb on FreeBSD/i386), although dovecot-0.99 worked... I can now get to my mail again, but every once in a while the following assertion kills the connection: file mail-transaction-log.c: line 273 (mail_transaction_log_close): assertion failed: (log->files == NULL) Please, advise... Thanks! -mi

2 1

[Dovecot] Auth checking also the service
by Alex 18 Nov '06

18 Nov '06

Hello everyone. I'm switching to dovecot from courier-imap and after some problems with Apple Mail client, now everything seems to be fine. The only problem that I have not solved yet is to check also the service (pop3, pop3s, imap, imaps) in the authentication phase. In courier-authlib I do this: MYSQL_SELECT_CLAUSE SELECT username, \ password, \ "", \ 1002, \ 1003, \ '/vmail', \ maildir, \ quota, \ name, \ "" \ FROM mailbox \ WHERE username="$(local_part)@$(domain)" \ AND active=1 \ AND $(service)=1 where $(service) can be pop3, pop3s, imap or imaps. Is it possible to do a similar thing in dovecot? Thank you in advance, Alex

3 4

[Dovecot] sieve newbie question
by matteo＠progettomio.net 17 Nov '06

17 Nov '06

Hi all, can you clarify my doubts about sieve? I understand what is it, but what's the different between use exim with rules + dovecot and use exim + dovecot-lda + sieve rules? i can create many kind of rules on exim, then i don't get the difference. if someone is so kind to explain me the main points i'll appreciate it! Regards, Matteo

3 3

[Dovecot] Help needed
by Ricardo Dias Campos 17 Nov '06

17 Nov '06

Hi. Days ago I sent a message to this list asking for help on a problem that seemed to me to be old: dovecot hangs and dovecot-auth posts log messages like: Nov 16 17:04:39 netuno dovecot: imap-login: Can't connect to auth server at default: Resource temporarily unavailable Nov 16 17:04:42 netuno dovecot: pop3-login: Can't connect to auth server at default: Resource temporarily unavailable Unfortunatelly when this happens the only way to recover is to restart dovecot. After I while I begun to clean the dovecot-auth processes (defunct or not) that remain in the process list and the cycle of running/hunging restart from 1 hang a day until it reaches 1 hang each 10 minutes, when I kill dovecot-auth again. I've seen some days ago some messages related to this problem but they were inconclusive, meaning that they didn't point to a solution. Any help is welcome. Thanks. Ricardo

1 0

[Dovecot] LDA Question
by Jeff 17 Nov '06

17 Nov '06

I need some advice about replacing maildrop with the Dovecot LDA. I need to replicate a setup that uses postfix+maildrop+spamassassin. We'll be using Dovecot 1rc13. In the current setup, maildrop reads a file called .mailfilter in each user's folder, then call spamassassin according to the user's preferences. The file is simple, and looks like this -- if ( $SIZE > 20971520 ) { EXITCODE=77 echo "Your email was rejected because it exceeded limit of 20 MB" exit } if ( $SIZE < 26144 ) { exception { xfilter "/usr/local/bin/spamc -u user(a)domain.com" } } exception { to "$DEFAULT/Maildir/" } What is the most straightforward way to have 'Deliver' do the same thing, without changing the way that SA gets called? Apologies in advance if this is a boneheaded question. I've been sorting through Sieve documentation and HOWTOs and I see everything but what I need.

2 1

[Dovecot] maildirsize update error?
by Maykel Moya 16 Nov '06

16 Nov '06

According to [1], Trash is a reserverd folder name. When moving a message to it, maildirsize should be update with a negative byte count. If I move a message from any folder to Trash, maildirsize gets two lines, one positive and one negative. The problem is that a user can't move messages to Trash while being overquota because the positive entry goes before the negative. I'm using dovecot-1.0rc14. Regards maykel [1] http://www.inter7.com/courierimap/README.maildirquota.html

1 0

[Dovecot] Dovecot tries to create bogus files in /var/mail
by Mikhail Teterin 16 Nov '06

16 Nov '06

After upgrading from 0.99.2 to 1.0rc14, I started seeing log-entries like: Nov 16 12:56:22 corbulon dovecot: IMAP(mksarch): mkdir_parents(/var/mail/mksarch/.imap/INBOX) failed: Not a directory Nov 16 12:56:51 corbulon dovecot: IMAP(anat): open(/var/mail/anat/inbox, O_CREAT) failed: Not a directory Nov 16 12:56:51 corbulon dovecot: IMAP(anat): mkdir_parents(/var/mail/anat/.imap/INBOX) failed: Not a directory And my IMAP client (KMail) shows up error message with "Internal server error". The files in /var/mail/ are just that -- files (in the bad old Unix mbox format), and not directories, why is dovecot treating them as directories? Please advise... Thanks! -mi

1 0

[Dovecot] NFSV4?
by Charles Marcus 16 Nov '06

16 Nov '06

Hi Timo, I just read about NFSv4 now being included in SuSE and Redhat Enterprise versions, and although I don't use it myself, wondered how this will impact Dovecot for those using it? Will it make life easier? Or is it even supported currently? Just curious... thanks... -- Best regards, Charles

3 3

[Dovecot] Dovecot's MySQL authentication driver
by guard 16 Nov '06

16 Nov '06

Hi, I'm wonderig if dovecot have any mechanism which prevent sql injection? I didn't find anything about that. How can I escape inputs in sql query? Best regards.

7 7

[Dovecot] Problem with authentication?
by Lisa Rau 15 Nov '06

15 Nov '06

We have things set up so Outlook and Outlook express are sending passwords via plain text, but Dovecot is saying the server was expecting an excrypted password -- can anyone help / give us a list of things to look at??? Hopefully, Lisa

4 3

[Dovecot] dovecot & pine
by erald troja 15 Nov '06

15 Nov '06

Hello, using dovecot-1.0.r12 on a 6.1 FreeBSD system and pine-4.64 on FreeBSD as well. After switching from Courier..i cannot seem to access my folders anymore. Just INBOX is viewable. On different mail clients on has to resubscribe..yet there's no such feature w/Pine. Anyone ever had this issue? Also, let me know what sort of info you need me to post in here to get some help on this. Thanks

2 2

[Dovecot] 1.0.rc13 released
by Timo Sirainen 15 Nov '06

15 Nov '06

http://dovecot.org/releases/dovecot-1.0.rc13.tar.gz http://dovecot.org/releases/dovecot-1.0.rc13.tar.gz.sig I'll just keep on making new releases now whenever something important is fixed. Hopefully there shouldn't be many left anymore. Most of the bugs fixed in this release were found by stress testing with my imaptest tool (http://dovecot.org/tools/imaptest.c) If you're interested in knowing how perfectly your Dovecot setup works (especially if you're using NFS), you could try the tool yourself also. I still see one crash with mmap_disable=yes, but it's pretty rare. Will see if I get it fixed before v1.0, but it's not that important. + deliver: If we're executing as a normal system user, get the HOME environment from passwd if it's not set. This makes it possible to run deliver from .forward. - Older compilers caused LDAP authentication to crash - Dying LDAP connections weren't handled exactly correctly in rc11, although it seemed to work usually - Fixed crashes and memory leaks with AUTHENTICATE command - Fixed crashes and leaks with IMAP/POP3 proxying - maildir: Changing a mailbox while another process was saving a message there at the same may have caused the changes to not be made into the maildir, which could have caused other problems later..

4 9

[Dovecot] Dovecot/Postfix SASL problem
by Tomislav Filipčić 15 Nov '06

15 Nov '06

Hi. I'm trying to get Dovecot - Postfix - SASL to work. But I need some help. Dovecot v1.0.rc14 Postfix 2.3.4 dovecot.conf ---------------- auth default { mechanisms = plain login passdb pam { } passdb passwd { } socket listen { client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } } } postfix/main.cf ------------------ smtpd_sasl_auth_enable = yes smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination broken_sasl_auth_clients = yes smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth smtpd_sasl_authenticated_header = yes telnet test session ----------------------- orion:~ tomislav$ telnet ra.mahune.org 25 Trying 63.99.9.80... Connected to ra.mahune.org. Escape character is '^]'. 220 ra.mahune.org ESMTP Postfix EHLO ra.mahune.org 250-ra.mahune.org 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-AUTH PLAIN LOGIN 250-AUTH=PLAIN LOGIN 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN AUTH PLAIN bmFddAc0b2pvAHRvam8= 535 5.7.0 Error: authentication failed: mail logs: ------------- Nov 14 22:21:38 [postfix/smtpd] connect from 83-131-68-11.adsl.net.t-com.hr[83.131.68.11] Nov 14 22:22:24 [dovecot] auth(default): client in: AUTH_1_PLAIN_service=smtp_resp=bmFddAc0b2pvAHRvam8= Nov 14 22:22:24 [dovecot] auth(default): passdb(najt,master): Attempted master login with no master passdbs Nov 14 22:22:25 [dovecot] auth(default): client out: FAIL_1_user=tojo Nov 14 22:22:25 [postfix/smtpd] warning: 83-131-68-11.adsl.net.t-com.hr[83.131.68.11]: SASL PLAIN authentication failed: Any ideas? Thank you

3 2

[Dovecot] 45second delays on log in
by Ben Marsh 14 Nov '06

14 Nov '06

Dear List Members, We have been running Dovecot as an IMAP server for web based access to email for our customers. At the moment, when the server is under load, some users are finding that it takes 45 seconds to log in. I was wondering if any of you guys would have any tips. I would love any information that would help solve or debug this issue. Background information: The server is Debian with kernel 2.4.31. We are running Dovecot 1.0rc6. I have reviewed the change logs and not found any changes pertinent to our situation from rc6 to rc14 (But maybe I am wrong). We have our own auth mechanism. This auth mechanism is the same used across our other products and we haven't had the same delays with the other products. From the information in the various log files the auth mechanism responds almost instantaneously but it still takes a long time for 1 OK Logged in. message to arrive on the screen when using telnet localhost 143 to login. All the mailboxes are stored over NFS. I have taken the step of moving the INDEXES from NFS to a local hard drive using default_mail_env = maildir:%h/mail:INDEX=/spare/%h in the config file. (/spare is a locally attached hard drive). We are using Maildir for our mailboxes so I am told that locking should not be a problem. A mailbox would never be accessed by two machines simultaneously due to the architecture of the system. In order to gain performance increases we also implemented an IMAP proxy between the webmail client and the imap server. This removes delays in all but the first attempt to access webmail. When logging into a user for which login has been verified to take about 45seconds deletion of the large numbers of messages seemed to speed up login for that particular mailbox indicating to me that it was other things that dovecot does after login and before the 1 OK Logged in. message is displayed that takes up all the time. Unfortunately this theory failed when I tried it with other users. I have also analysed the log files. of the 100,000 lines in the log file 49 were messages: Child 12040 (login) returned error 89 54 were messages: imap-login: Master sent reply with unknown tag 18 The actual number at the end of the message changes lots. The frequency of the extended logins would make it extremely unlikely that these messages are the problem. Any help is very much appreciated. Thanks, Ben Marsh

4 4

[Dovecot] Problem with image attachment
by Marc Morata 14 Nov '06

14 Nov '06

Hi, I have a litle problem: The image attachment has a one line blank in top. This provokes that the image are corrupt. Only happens with imap acces. With pop3 are visualized correctly. Thank you. -- Marc Morata Fité mmorata(a)gnuine.com Gnuine www.gnuine.com

2 2

[Dovecot] Question regarding bounce messages on quota full.
by Mustafa A. Hashmi 14 Nov '06

14 Nov '06

Hi all, Using dovecot's LDA (debian backports package: 1.0rc2), users who have exceeded their quota when receiving messages see the message get bounced. This works fine for us, however, the sender is sent a message as follows: -- Start bounce text ERROR This is the Postfix program at host foo.domain.com I'm sorry to have to inform you that your message could not be be delivered to one or more recipients. It's attached below. For further assistance, please send mail to <postmaster> If you do so, please include this problem report. You can delete your own text from the attached returned message. The Postfix program <user(a)foo.domain.com>: Command died with status 11: "/usr/lib/dovecot/deliver" -- End bounce text Is it not possible to specify something a bit more civil for the sender? a "User is over quota" message works much better here. We're already running a script which notifies users when they approach a certain specified % that they're about to exceed quota, however, hoping they all comply is another thing entirely. Any assistance would be much appreciated. Regards, -- Mustafa A. Hashmi mahashmi(a)gmail.com mh(a)stderr.net

2 3

[Dovecot] NTLM authentication from Outlook
by Lars Skovgaard 14 Nov '06

14 Nov '06

Hi all I've enabled ntlm authentication in dovecot, and use dovecot sasl in postfix as well. Authentication with ntlm works well from Mac OS X Mail.app, as well as from Outlook Express, but fails with Outlook. Strangely enough, ntml authentication works in Outlook when using smtp (via postfix), but neither from imap or pop3 (both dovecot). As dovecot sasl handles all authentication against a mysql userdb, this strikes me as very strange. I've instructed my clients with Outlook to fetch mail using a ssl- encrypted connection, and to send using ntlm-authentication. This works, but I would like to have ntlm available as an option to all my clients, without forcing them to change mail-clients. I've turned on auth_verbose, auth_debug and auth_debug_passwords, and compared the passwordstring with the one calculated using dovecotpw, and they match. The only odd thing is that the username is returned from Outlook as an all-caps string, so user(a)domain.tld becomes USER(a)DOMAIN.TLD. I don't know if it matters, but I don't think so, as changing the user-login to an all-caps version doesn't solve the problem. Any hints will be most welcome. /Lars

1 0

[Dovecot] MacOS X and quota-plugin
by Lars Skovgaard 13 Nov '06

13 Nov '06

Hi all, I've installed dovecot 1.0 rc12 on a MacOS X client system with only a handful of users – all virtual – and would like to enable quotas. I've tried searching the wiki for information on how to do this, but haven't been able to find anything – which is why I turn to the list in hope there's someone out there who can point me in the right direction. I've compiled dovecot without any other authentication than sql and pam, and have enabled ssl, pop3 and dovecot lda (for use with postfix when I get around to it). The installation went smoothly, and dovecot is working great without quota-support. However, when I enable quota- support, the imap child-process crashes. Here's a few lines from the log, slightly altered to protect user-identities: Nov 8 23:05:09 SD-Server dovecot: imap-login: Login: user=<imapuser>, method=PLAIN, rip=192.168.2.10, lip=192.168.2.2, TLS Nov 8 23:05:09 SD-Server dovecot: child 22662 (imap) killed with signal 11 Nov 8 23:05:09 SD-Server crashdump[22663]: imap crashed Nov 8 23:05:09 SD-Server crashdump[22663]: crash report written to: / Library/Logs/CrashReporter/imap.crash.log Nov 8 23:05:12 SD-Server dovecot: imap-login: Login: user=< imapuser >, method=PLAIN, rip=192.168.2.10, lip=192.168.2.2, TLS Nov 8 23:05:13 SD-Server dovecot: child 22665 (imap) killed with signal 11 Nov 8 23:05:13 SD-Server crashdump[22666]: imap crashed Nov 8 23:05:13 SD-Server crashdump[22666]: crash report written to: / Library/Logs/CrashReporter/imap.crash.log Nov 8 23:05:16 SD-Server dovecot: imap-login: Login: user=< imapuser >, method=PLAIN, rip=192.168.2.10, lip=192.168.2.2, TLS Nov 8 23:05:17 SD-Server dovecot: child 22670 (imap) killed with signal 11 Nov 8 23:05:17 SD-Server crashdump[22671]: imap crashed Nov 8 23:05:17 SD-Server crashdump[22671]: crash report written to: / Library/Logs/CrashReporter/imap.crash.log This is what I have done in dovecot.conf to enable quota: protocol imap { mail_plugins = quota imap_quota mail_plugin_dir = /usr/local/lib/dovecot/imap } plugin { #quota = dict:storage=10240 #quota = dirsize:storage=10240 #quota = maildir:storage=10240 #quota = maildir:storage=10240 mysql:/usr/local/etc/dovecot-sql.conf #quota = fs:storage=10240 #quota = fs } As you might guess from the lines under "plugin", I've tried a lot of different combinations. If I enable ANY of the above lines under plugin, the child-processes die upon login. When all have been commented out, there's no more crashing – until I try to see how much space is available, then it crashes again. I've tried adding an extra "quota" field to my mysql userdb to handle quotas, but with the same result. mysql-query looks like this (as described in the wiki): user_query = SELECT home, uid, gid, 'dirsize:storage=' || quota_kb AS quota FROM users WHERE userid = '%u' As with the settings in dovecot.conf, Ive tried various combinations of dict, dirsize and so on, but without any luck. This is what the entries in my crashdump file looks like: Host Name: SD-Server Date/Time: 2006-11-09 00:06:17.151 +0100 OS Version: 10.4.7 (Build 8J135) Report Version: 4 Command: imap Path: /usr/local/libexec/dovecot/imap Parent: dovecot [8370] Version: ??? (???) PID: 23101 Thread: 0 Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_PROTECTION_FAILURE (0x0002) at 0x00000044 Thread 0 Crashed: 0 lib01_quota_plugin.so 0x00256ca8 quota_root_iter_next + 32 (array.h:144) 1 lib02_imap_quota_plugin.so 0x00273700 cmd_getquotaroot + 280 (imap-quota-plugin.c:87) 2 imap 0x000076b8 _client_input + 556 (client.c:377) 3 imap 0x0006e9a8 io_loop_handler_run + 424 (ioloop-poll.c:200) 4 imap 0x0005e214 io_loop_run + 40 (ioloop.c: 280) 5 imap 0x0000fd38 main + 1740 (main.c:241) 6 imap 0x00001df4 _start + 348 (crt.c:272) 7 imap 0x00001c94 start + 60 Thread 0 crashed with PPC Thread State 64: srr0: 0x0000000000256ca8 srr1: 0x000000000200f030 vrsave: 0x0000000000000000 cr: 0x48000244 xer: 0x0000000000000004 lr: 0x0000000000256c94 ctr: 0x0000000000256c88 r0: 0x0000000000273700 r1: 0x00000000bffff410 r2: 0x0000000000000000 r3: 0x0000000000501e10 r4: 0x0000000000000010 r5: 0x0000000000000010 r6: 0x0000000000000022 r7: 0x0000000000000000 r8: 0x0000000000000002 r9: 0x0000000000501e20 r10: 0x0000000000000000 r11: 0x0000000000275044 r12: 0x0000000000256c88 r13: 0x0000000000000000 r14: 0x0000000000000000 r15: 0x0000000000000000 r16: 0x0000000000000000 r17: 0x0000000000000000 r18: 0x0000000000000000 r19: 0x0000000000000000 r20: 0x0000000000000000 r21: 0x0000000000000000 r22: 0x0000000000000000 r23: 0x0000000000000000 r24: 0x0000000000000000 r25: 0x000000000007e808 r26: 0x0000000000000000 r27: 0x0000000000500a24 r28: 0x0000000000501e10 r29: 0x0000000000500a24 r30: 0x00000000002492d0 r31: 0x0000000000256c94 Binary Images Description: 0x1000 - 0x7efff imap /usr/local/libexec/dovecot/imap 0x253000 - 0x258fff lib01_quota_plugin.so /usr/local/lib/ dovecot/imap/lib01_quota_plugin.so 0x273000 - 0x274fff lib02_imap_quota_plugin.so /usr/local/lib/ dovecot/imap/lib02_imap_quota_plugin.so 0x8fe00000 - 0x8fe52fff dyld 45.3 /usr/lib/dyld 0x90000000 - 0x901bbfff libSystem.B.dylib /usr/lib/libSystem.B.dylib 0x90213000 - 0x90218fff libmathCommon.A.dylib /usr/lib/system/ libmathCommon.A.dylib 0x92d65000 - 0x92e53fff libiconv.2.dylib /usr/lib/libiconv.2.dylib 0x936e3000 - 0x93703fff libmx.A.dylib /usr/lib/libmx.A.dylib Best regards, Lars

2 2

[Dovecot] my_strncasecmp ignores max_chars
by Ben Winslow 13 Nov '06

13 Nov '06

my_strncasecmp ignores the length parameter, which breaks all sorts of things on platforms where the function actually gets used. Trivial patch attached. -- Ben Winslow <rain(a)bluecherry.net>

2 2

Re: [Dovecot] assertion failed: (need_space == (uoff_t)-mails[idx].space)
by David King 13 Nov '06

13 Nov '06

>> Ah, makes sense, I feel dumb now :) >> Here's a backtrace from imap.core, I can do more with the core if it >> helps >> #0 0x182bc437 in kill () from /lib/libc.so.6 >> #1 0x182bc3d6 in raise () from /lib/libc.so.6 >> #2 0x182baf02 in abort () from /lib/libc.so.6 > .. > Not having debugging information stripped would be helpful :) Well now I feel dumber :) FreeBSD uses the install-strip target in the Makefile to install the binaries, so even if I have -g in COPTS the binaries get stripped. I overwrote the binaries with those from src/ and reproduced the crash (which is as easy and opening the folder in an IMAP client), here's the new backtrace (gdb) bt #0 0x182bc437 in kill () from /lib/libc.so.6 #1 0x182bc3d6 in raise () from /lib/libc.so.6 #2 0x182baf02 in abort () from /lib/libc.so.6 #3 0x080b7355 in i_internal_panic_handler (fmt=0x0, args=0x0) at failures.c:382 #4 0x080b6dc9 in i_panic (format=0x0) at failures.c:180 #5 0x0807c19d in mbox_sync_read_and_move (sync_ctx=0xbfbfe8b0, mail_ctx=0xbfbfe580, mails=0x80fb000, seq=405589544, idx=0, padding=3217024224, move_diff=37, expunged_space=0, end_offset=3333, first_nonexpunged=true) at mbox-sync-rewrite.c:405 #6 0x0807c70e in mbox_sync_rewrite (sync_ctx=0xbfbfe8b0, mail_ctx=0x0, end_offset=3333, move_diff=37, extra_space=63, first_seq=1, last_seq=0) at mbox-sync-rewrite.c:507 #7 0x08076df9 in mbox_sync_handle_missing_space (mail_ctx=0xbfbfe7b0) at mbox-sync.c:854 #8 0x0807756b in mbox_sync_loop (sync_ctx=0xbfbfe8b0, mail_ctx=0xbfbfe7b0, partial=true) at mbox-sync.c:1158 #9 0x08078326 in mbox_sync_do (sync_ctx=0xbfbfe8b0, flags=MBOX_SYNC_REWRITE) at mbox-sync.c:1480 #10 0x08078bea in mbox_sync (mbox=0x80e5840, flags=MBOX_SYNC_REWRITE) at mbox-sync.c:1732 #11 0x08070456 in mbox_storage_close (box=0x80e5840) at mbox- storage.c:1063 #12 0x080a8607 in mailbox_close (_box=0x0) at mail-storage.c:371 #13 0x08058a4d in cmd_logout (cmd=0x80e8044) at cmd-logout.c:18 #14 0x0805b12c in client_handle_input (cmd=0x80e8044) at client.c:377 #15 0x0805b21d in _client_input (context=0x80e8000) at client.c:428 #16 0x080bd39c in io_loop_handler_run (ioloop=0x80e4000) at ioloop- poll.c:199 #17 0x080bccb8 in io_loop_run (ioloop=0x80e4000) at ioloop.c:281 #18 0x08064078 in main (argc=3, argv=0x0, envp=0x0) at main.c:280 >> Sure, you can get it here: > You don't have X-IMAPbase or X-IMAP header in the first mail, so I > guess > you're also reading and modifying the mailbox outside Dovecot? That by > itself shouldn't break it as long as the locking is done correctly. > But > I guess your problem is somehow related to that. I couldn't anyway > cause > a crash using the file. Procmail writes to the folders, but it uses dotlocks, and I don't have logs of it crashing, whereas I do have logs of dovecot crashing :) I'm confused as to what the last sentence says, do you mean that you were able to reproduce the crash?

1 0

[Dovecot] imap - file ioloop.c: line 22 (io_add): assertion failed: (fd >= 0)
by Wolfgang Fischer 12 Nov '06

12 Nov '06

in dovecot 1.0RC13 after "Disconnected in IDLE" I get following Error: Nov 12 19:49:51 mini1 dovecot: IMAP(wolfgang): Disconnected in IDLE Nov 12 19:49:51 mini1 dovecot: IMAP(wolfgang): file ioloop.c: line 22 (io_add): assertion failed: (fd >= 0) Nov 12 19:49:51 mini1 dovecot: child 1301 (imap) killed with signal 6 dovecot is running with Mac OS 10.4.8 (PowerPC), Mailbox Format is mbox. Wolfgang

2 1

[Dovecot] mail_chroot: no variables support?
by Lev Serebryakov 12 Nov '06

12 Nov '06

Hello dovecot, It seems, that mail_chroot setting can't use variables. I try to set it to `%h' and it deosn't work :( Are here any security considerations, or it is bug? -- Best regards, Lev mailto:lev@serebryakov.spb.ru

2 3

[Dovecot] lda quota
by razor 12 Nov '06

12 Nov '06

hello i am using dovecot-1.0.r7 on freebsd 5.4 everything is fine, but i wanna more -) i am using dovecot-lda + plugin quota. when i am trying to send a email for user with overquota i am getting "local delivery failed". can i make some more informatic message for users like "your recipient box is overquoted". exim configure : ... dovecot_delivery: driver = pipe debug_print = "T: ldap_maildir_home for $local_part@$domain" command = /usr/local/libexec/dovecot/deliver -d $local_part message_prefix = message_suffix = user = mailnull group = mail delivery_date_add envelope_to_add return_path_add log_output ... dovecot.conf ... protocol lda { mail_plugins = quota } ... thanx -- regards, Razorenov Alex

2 3

[Dovecot] 1.0.rc11 released
by Timo Sirainen 12 Nov '06

12 Nov '06

http://dovecot.org/releases/dovecot-1.0.rc11.tar.gz http://dovecot.org/releases/dovecot-1.0.rc11.tar.gz.sig Hopefully the last RC release? As far as I know there are no major problems left now. If nothing big shows up, v1.0 should be out in a couple of weeks. * Renamed default_mail_env to mail_location. default_mail_env still works for backwards compatibility. * deliver: When sending rejects, don't include Content-Type in the rejected mail's headers. * LDAP changes: * If auth binds are used, bind back to the default dn before doing a search. Otherwise it could fail if a user gave an invalid password. * Initial binding at connect is now done asynchronously. * Use pass_attrs even with auth_bind=yes since it may contain useful non-password fields. + passdb checkpassword: Give TCPLOCALIP and TCPREMOTEIP and PROTO=TCP environments to the checkpassword binary so we're UCSPI (and vchkpw) compatible. - mbox handling was a bit broken in rc10 - Using Dovecot via inetd kept crashing dovecot master - deliver: Don't crash with -f "". Changed the default from envelope to be "MAILER-DAEMON". - INBOX wasn't shown with LSUB command if only prefixed namespaces were used. - passdb ldap: Reconnecting to LDAP server wasn't working with auth binds. - passdb sql: Non-plaintext authentication didn't work - MySQL passdb ignored all non-password checks, such as allow_nets - trash plugin was broken

3 15

[Dovecot] Deliver: command time exceed limit
by Dominique Feyer 12 Nov '06

12 Nov '06

We use Dovecot on a cluster (10'000 domains, 30'000 account) without any problem with pop/imap. We use Dovecot 1.0 RC10 Now we use virtual transport from postfix for mail delivery. We need the Dovecot LDA for sieve support. We test this solution on some domains with success. But if we change the configuration of all our domains, we have a lots of bounce with this error in postfix log: postfix/pipe[24573]: 4F6D7CF11: to=<info(a)XXXX.com>, relay=dovecot, delay=1200, status=bounced (Command time limit exceeded: "/usr/local/dovecot/libexec/dovecot/deliver") If I watch the deliver activity with ps/awk/watch, I see that if deliver duration time exceed some seconds, the deliver process stay in memory but do nothing. Here a strace output of this case: Process 349 attached - interrupt to quit gettimeofday({1161965973, 768478}, {0, 0}) = 0 poll( Strace output nothing before the SIGKILL from postfix (command time exceed 1200 second), the end of the strace: [{fd=5, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=9, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 2, 2147483647) = -1 EINTR (Interrupted system call) +++ killed by SIGKILL +++ I'm not sure is this problem has a relation with our deliver problem. But in the deliver log /var/log/dovecot/deliver, I have a lots of message: deliver(info(a)labomex.com): 2006.10.27 18:29:28 Error: file_dotlock_replace(/var/mail/labomex.com/mails/info/.dovecot.lda-dupes) failed: No such file or directory deliver(info(a)labomex.com): 2006.10.27 18:29:28 Error: rename(/var/mail/labomex.com/mails/info/.dovecot.lda-dupes.lock, /var/mail/labomex.com/mails/info/.dovecot.lda-dupes) failed: No such file or directory Our dovecot.conf (lda parts): protocol lda { postmaster_address = postmaster(a)clm.net4all.ch #hostname = mail_plugins = cmusieve mail_plugin_dir = /usr/local/dovecot/lib/dovecot/lda sendmail_path = /usr/sbin/sendmail auth_socket_path = /var/run/dovecot/auth-master log_timestamp = %Y.%m.%d %H:%M:%S%t log_path = /var/log/dovecot/deliver info_log_path = /var/log/dovecot/deliver.info } We use on UID/GID per domain so every account of a domain use the same UID/GID. The mail storage is on a Debian Sarge NFS server with 2.4.27-3-686-smp. Indexes are stored localy on each POP/IMAP/LDA server. I don't understand why we have this problem. If somebody can help us, thanks a lots. Dominique Feyer

2 7

[Dovecot] Output to logfile
by Egbert Jan 12 Nov '06

12 Nov '06

Hello, Has everybody those irritating '^I' (tabs?) in his syslog for dovecot messages? Why not replace them by ordinary singe spaces? Maby something for a future release? Egbert Jan

2 1

[Dovecot] Writing to mail directory
by Gerard Seibert 12 Nov '06

12 Nov '06

FreeBSD 6.1 Dovecot 1.0.rc12 Using Dovecot as an LDA produces this error message: // START ERROR MESSAGE // deliver(gerard): Error:open(/var/mail/.temp.scorpio.seibercom.net.812.03034e3c3c1ab1c8) failed: Permission denied deliver(gerard): Error: file_lock_dotlock() failed with mbox file /var/mail/gerard: Permission denied // END ERROR MESSAGE// Actually, there are dozens of similar messages for all of my accounts. One example is enough to see what I am referring to. I am using Postfix for my mail-server. If I change the permissions on the directory to '1777' the error goes away and everything seems normal. The problem is that I should not have to do that and I do not understand what the problem is. Has anyone else experienced this phenomena and come up with a solution? Thanks! -- Gerard "Off list mail from *.gmail.com is rejected/deleted unseen. Don't waste your time."

2 2

[Dovecot] Using Substring Width with Mailhome Variables
by Matthew Fisch 12 Nov '06

12 Nov '06

Hello All, I am currently running Dovecot v1.0.rc13 from dovecot-1.0-0_31.rc13.fc5.at.i386.rpm on Linux HOST 2.6.17-1.2157_FC5 #1 Tue Jul 11 22:55:46 EDT 2006 i686 i686 i386 GNU/Linux. I am trying to install Dovecot in a large mail hosting environment and running into troubles. I have specified my mail home in dovecot.conf as follows: default_mail_env = maildir:/mnt/fileserver/maildir/%0.1d/%1.1d/%d/%n I've also tried among other variations: default_mail_env = maildir:/mnt/fileserver/maildir/%0d/%1.1d/%d/%n The expected behavior here, is to resolve this to: /mnt/fileserver/maildir/a/b/abc.com/user However, Dovecot seems to resolve this to: /mnt/raidzone01/maildir/abc.com/bc.com/abc.com/user/ It appears to me using 'width' with a substring does not work as is advertised on http://wiki.dovecot.org/Variables. This page does describe I need to be using 1.0-tests, what is 1.0-tests? I've also tried the default FC5 package: 1.0-0.beta8.2.fc5. Did I misunderstand the syntax? Am I using the wrong version? I won't be able to use dovecot without support for this feature as I am hosting many thousands of domains and know not how else to resolve them all. Thanks for all your time in advance, Matt Matthew Fisch Your-Site.com

2 1

Re: [Dovecot] Too many open files
by Timo Sirainen 12 Nov '06

12 Nov '06

On Wed, 2006-11-08 at 11:45 -0500, bofh list wrote: > imap 12009 user 16u REG 0,19 135348 > 9876198 /chroot/mailstore/user/Maildir/.Trash/dovecot.index.log.2 > (netapp-storage:/vol/mailstore) > imap 12009 user 17u REG 0,19 135348 > 9876198 /chroot/mailstore/user/Maildir/.Trash/dovecot.index.log.2 > (netapp-storage:/vol/mailstore) .. Oh, I see. Could you test if this patch fixes it: http://dovecot.org/list/dovecot-cvs/2006-November/006767.html

2 3

[Dovecot] RFC 2822 - message-id
by Tom Allison 10 Nov '06

10 Nov '06

I was porting some email from one imap server location to another and ran into a feature of something. One of them writes message-id as 'Message-Id' and the other writes it as 'Message-ID'. Because of this, all the messages are forever different. All mail is delivered from postfix and will be in the future. But I'm asking which of these syntaxes is correct or if there is a right/wrong way of writing the headers? RFC2822 doesn't come right out and say it, but all the examples therein are "Message-ID". RFC 822 says they are all the same. Both?

3 2

[Dovecot] 1.0.rc12 released
by Timo Sirainen 10 Nov '06

10 Nov '06

http://dovecot.org/releases/dovecot-1.0.rc12.tar.gz http://dovecot.org/releases/dovecot-1.0.rc12.tar.gz.sig Since rc11 has problems compiling with BSDs, here's a new release. Just two changes: - rc11 didn't compile with some compilers - default_mail_env fallbacking was broken with --exec-mail Here's also again the rc11 changes: * Renamed default_mail_env to mail_location. default_mail_env still works for backwards compatibility. * deliver: When sending rejects, don't include Content-Type in the rejected mail's headers. * LDAP changes: * If auth binds are used, bind back to the default dn before doing a search. Otherwise it could fail if a user gave an invalid password. * Initial binding at connect is now done asynchronously. * Use pass_attrs even with auth_bind=yes since it may contain useful non-password fields. + passdb checkpassword: Give TCPLOCALIP and TCPREMOTEIP and PROTO=TCP environments to the checkpassword binary so we're UCSPI (and vchkpw) compatible. - mbox handling was a bit broken in rc10 - Using Dovecot via inetd kept crashing dovecot master - deliver: Don't crash with -f "". Changed the default from envelope to be "MAILER-DAEMON". - INBOX wasn't shown with LSUB command if only prefixed namespaces were used. - passdb ldap: Reconnecting to LDAP server wasn't working with auth binds. - passdb sql: Non-plaintext authentication didn't work - MySQL passdb ignored all non-password checks, such as allow_nets - trash plugin was broken

7 10

[Dovecot] LDAP authentication windows 2003
by Matheus Antonio Oliveira 09 Nov '06

09 Nov '06

4 4

[Dovecot] Qpopper migration?
by Steve Goodman (lists) 09 Nov '06

09 Nov '06

Hello, As this is my first post to the list, first and foremost I'd like to thank Timo for writing great software; we've successfully moved to Dovecot for over 10,000 users from UW-IMAP and get great performance. On our overloaded staff POP3/IMAP server, we are looking at replacing qpopper+uw-imapd with dovecot, as an interim before moving them to the main Unix mailstore. The system is primarily POP3, with a small number of heavy IMAP users causing the system grief. There are a large number of POP3 users who leave messages on the server. What I want to ensure doesn't happen is that they are forced to download them again. Do I need to add anything specific in the pop3_uidl_format or am I barking up the wrong tree? Kind Regards, Steve

3 2

[Dovecot] SSL-read error in logfile
by Egbert Jan van den Bussche 08 Nov '06

08 Nov '06

Now most things seem to work (rc12 on Mandriva 2007.0), I've been looking more thoroughly at the syslog file. I see a 'syscall failed' at the end of a normal timed poll from the client. I wonder what it means. Sorry for the layout, it is messed up by the cut and paste. I have created the selfsigned cert and key in the /etc/ssl/dovecot/[certs,private] directories. Egbert Jan Nov 8 21:31:39 dev dovecot: auth(default): client in: AUTH^I1^IPLAIN^Iservice=IMAP^Isecured^Ilip=192.168.1.10^Irip=192.168.1.13^Iresp=<hidden> Nov 8 21:31:41 dev dovecot: auth(default): pam(user(a)domain.tld,192.168.1.13): pam_authenticate() failed: User not known to the underlying authentication module Nov 8 21:31:41 dev dovecot: auth-worker(default): sql(user(a)domain.tld,192.168.1.13): query: SELECT password FROM mailbox WHERE username = 'user(a)domain.tld' AND active='1' Nov 8 21:31:41 dev dovecot: auth(default): client out: OK^I1^Iuser=user(a)domain.tld Nov 8 21:31:41 dev dovecot: auth(default): master in: REQUEST^I14^I4012^I1 Nov 8 21:31:41 dev dovecot: auth(default): passwd(user(a)domain.tld,192.168.1.13): unknown user Nov 8 21:31:41 dev dovecot: auth-worker(default): sql(user(a)domain.tld,192.168.1.13): SELECT maildir, 1001 AS uid, 1001 AS gid, 'Maildir:/home/virtual/domain.tld/user' as mail FROM mailbox WHERE username = 'user(a)domain.tld' AND active = '1' Nov 8 21:31:41 dev dovecot: auth(default): master out: USER^I14^Iuser@domain.tld^Imaildir=domain.tld/user/^Iuid=1001^Igid=1001^Imail=Maildir:/home/virtual/domain.tld/user Nov 8 21:31:41 dev dovecot: imap-login: Login: user=<user(a)domain.tld>, method=PLAIN, rip=192.168.1.13, lip=192.168.1.10, TLS Nov 8 21:31:41 dev dovecot: auth(default): client in: AUTH^I1^IPLAIN^Iservice=IMAP^Isecured^Ilip=192.168.1.10^Irip=192.168.1.13^Iresp=<hidden> Nov 8 21:31:44 dev dovecot: auth(default): pam(user(a)domain.tld,192.168.1.13): pam_authenticate() failed: User not known to the underlying authentication module Nov 8 21:31:44 dev dovecot: auth-worker(default): sql(user(a)domain.tld,192.168.1.13): query: SELECT password FROM mailbox WHERE username = 'user(a)domain.tld' AND active='1' Nov 8 21:31:44 dev dovecot: auth(default): client out: OK^I1^Iuser=user(a)domain.tld Nov 8 21:31:44 dev dovecot: auth(default): master in: REQUEST^I15^I3990^I1 Nov 8 21:31:44 dev dovecot: auth(default): passwd(user(a)domain.tld,192.168.1.13): unknown user Nov 8 21:31:44 dev dovecot: auth-worker(default): sql(user(a)domain.tld,192.168.1.13): SELECT maildir, 1001 AS uid, 1001 AS gid, 'Maildir:/home/virtual/domain.tld/user' as mail FROM mailbox WHERE username = 'user(a)domain.tld' AND active = '1' Nov 8 21:31:44 dev dovecot: auth(default): master out: USER^I15^Iuser@domain.tld^Imaildir=domain.tld/user/^Iuid=1001^Igid=1001^Imail=Maildir:/home/virtual/domain.tld/user Nov 8 21:31:44 dev dovecot: imap-login: Login: user=<user(a)domain.tld>, method=PLAIN, rip=192.168.1.13, lip=192.168.1.10, TLS Nov 8 21:31:44 dev dovecot: imap-login: SSL_read() syscall failed: EOF [192.168.1.13] Nov 8 21:31:44 dev dovecot: IMAP(user(a)domain.tld): Disconnected Nov 8 21:31:44 dev dovecot: imap-login: SSL_read() syscall failed: EOF [192.168.1.13] Nov 8 21:31:44 dev dovecot: IMAP(user(a)domain.tld): Disconnected: Logged out EOF

3 2

[Dovecot] Quota without dovecot LDA
by Riccardo Bini 08 Nov '06

08 Nov '06

Hi all, I use dovecot with maildir quota plugin + qmail + vpopmail but not dovecot LDA. My dovecot configuration: default_mail_env=maildir:~/Maildir:INDEX=/var/cache/dovecot/indexes/%h/%u:CONTROL=/var/cache/dovecot/control/%h If CONTROL env is set the maildirsize file is stored in /var/cache/dovecot/control/ but I use vpopmail as LDA. It's possible to add a setting in dovecot.conf to specify if dovecot LDA is active?? This is my pseudo-patch: src/plugins/quota/quota-maildir.c static const char *maildirsize_get_path(struct mail_storage *storage) { if (lda_enable) { return t_strconcat(mail_storage_get_mailbox_control_dir(storage, ""), } else { bool is_file; return t_strconcat(mail_storage_get_mailbox_path(storage, "", &is_file), "/"MAILDIRSIZE_FILENAME, NULL); } } dovecot.conf: lda_enable = no Ciao Rick

2 5

[Dovecot] How to give system and virtual users their own mail_location?
by Egbert Jan 08 Nov '06

08 Nov '06

Hi all. Now hopefully as a new thread because I still have this question. Apologies to Geert and Timo for my misbehaviour...(repling to the list and changing the subject). I hace Dovecot rc12 working on Mandriva 2007.0 now for system accounts and virtual accounts both imap and imaps can be used. Th problem now is that I cannot use both types of user at the same time. The 'mail_location = ' strings are very different: Real system users have their Maildir in /home/%u/Maildir/ but virtual users have their maildir in /home/virtual/%d/%n/. How can tell dovecot to use the first for /etc/passwd clients and second for mysql authenticated clients? Just adding two private namespaces does not work. That is for ONE user having more mailbox locations, isn't it? Thanks for any hints! Egbert Jan (NL)

1 1

[Dovecot] Wiki documentation
by Timo Sirainen 08 Nov '06

08 Nov '06

I spent most of today adding new content to the Wiki and cleaning up the existing content. The front page is now also reorganized, but there are several links in it to pages which are still missing. Please write them. :)

5 11

[Dovecot] L4 probes..
by Jorgen Lundman 08 Nov '06

08 Nov '06

Probably a special case here, but everytime the L4 probes the port, a line as added to the log. This gets a bit noisy. If a random IP connects, I'd want to see it, but maybe it would be nice to have the option to silence the log entry from certain hosts. For now I patch it locally, but without any .conf finesse. For example: Nov 8 10:55:24 corppop01 dovecot: [ID 107833 mail.info] pop3-login: Disconnected: rip=172.16.253.5, lip=172.16.253.128, TLS handshake Nov 8 10:58:00 corppop01 dovecot: [ID 107833 mail.info] pop3-login: Aborted login: rip=172.16.253.5, lip=172.16.253.128 -- Jorgen Lundman | <lundman(a)lundman.net> Unix Administrator | +81 (0)3 -5456-2687 ext 1017 (work) Shibuya-ku, Tokyo | +81 (0)90-5578-8500 (cell) Japan | +81 (0)3 -3375-1767 (home)

2 1

[Dovecot] dovecot lda works with maildir++ but does not enforce the quota?
by Antonio Casado Rodríguez 08 Nov '06

08 Nov '06

Hi all, I use Dovecot lda. Is there the possibility that dovecot lda works with maildir++ but does not enforce the quota? I have dovecot 1.0rc12, postfix, RedHat Enterprise Linux ES 4.0 Update 4. IMAP client Thunderbird 1.5.0.7 Only namespace: namespace private { separator = / inbox = yes prefix = location = maildir:~/Maildir/ } Thanks a lot.

2 2

[Dovecot] deliver feature request (filter)
by Neal Becker 08 Nov '06

08 Nov '06

I'm using maildrop for delivery, because I want to filter through spamassassin before delivery. Maildrop makes that trivial. It seems deliver can pipe (one way) to a command, but what is needed is to pipe: deliver -> spamd -> deliver which is what the maildrop xfilter does.

3 4

[Dovecot] Duplicate header extension keywords
by Rainer Ophoven 07 Nov '06

07 Nov '06

I'm running dovecot supporting imaps and pop3s in a small home-office environment on a Linux-box, kernel 2.4.33, with postfix-2.3.4, amavisd-new and spamassassin. I use Thunderbird as mail-client on Windows XP. ever since upgrading to RC10 I every now and then find these error messages in doveocot.log: Error: IMAP(rainer): Corrupted index file /home/rainer/Maildir/.software.Dovecot/dovecot.index: Duplicate header extension keywords and close by: Error: IMAP(rainer): Fixed index file /home/rainer/Maildir/.software.Dovecot/dovecot.index: first_recent_uid_lowwater 1952 -> 1951 Misconfiguration or where is the problem? -- in diesem Sinne, Rainer

2 1

[Dovecot] Corrupted index cache file dovecot.index.cache: invalid record size
by bofh list 07 Nov '06

07 Nov '06

Hi, Our dovecot setup consists of two hosts running dovecot-1.0.beta9 with Maildir/indices stored on NFS(noac,actimeo=0 used). I am seeing these messages at times - but no real problems on the client side. Is this something to worry about? dovecot: Oct 17 10:33:31 Error: IMAP(user): Corrupted index cache file mailstore/user/Maildir/.mail.incoming/dovecot.index.cache: invalid record size Thanks!

2 6

[Dovecot] RC10 errors
by Eric Rostetter 07 Nov '06

07 Nov '06

I just installed a limited test of RC10 last night. So far, all is great except for errors being logged for one user (out of about 150 users total). This one user has not yet complained or anything, but the log file has repeated entries of the following format for him (host and username changed to protect the guilty/innocent): Oct 24 06:13:02 mail dovecot: IMAP(username): file mbox-sync-rewrite.c: line 405 (mbox_sync_read_and_move): assertion failed: (need_space == (uoff_t)-mails[idx].space) Oct 24 06:13:02 mail1 dovecot: child 18235 (imap) killed with signal 6 I find it most interesting that only 1 out of 150+ users is getting this error... And again, no complaints from the user. Setup is: wu-imap mbox files in /var/spool/mail (exported via NFS, but local to the dovecot server). Mail in ~/mail/ (NFS mount, foreign to devecot server). Indexes in /var/dovecot/indexes (local to dovecot server with no NFS at all). -- Eric Rostetter The Department of Physics The University of Texas at Austin Go Longhorns!

1 1

[Dovecot] rc13 soon
by Timo Sirainen 07 Nov '06

07 Nov '06

I think I'll just start making new releases whenever I've fixed something important. You'll have a while to report more bugs and then I'll make rc13 release, maybe in about 5 hours or maybe tomorrow. I updated already the nightly snapshot if you want to test the upcoming rc13. Changes so far: + deliver: If we're executing as a normal system user, get the HOME environment from passwd if it's not set. This makes it possible to run deliver from .forward. - Older compilers caused LDAP authentication to crash - Dying LDAP connections weren't handled exactly correctly in rc11, although it seemed to work usually - Fixed crashes and memory leaks with AUTHENTICATE command - Fixed crashes and leaks with IMAP/POP3 proxying

1 0

[Dovecot] 1.0rc10 proxy memory usage problem
by Laurent Papier 07 Nov '06

07 Nov '06

Hi, I have a rather large dovecot setup (4 proxy only servers and 21 IMAP/POP3 servers) in production for 3 days now. The memory usage on my proxy servers only grows over time. It looks like a memory leak somewhere in dovecot. I have a RRD graph available on demand. Any advise on the configuration ? Timo, I have strace a process before the manual restart. If it can help just ask for. My configuration : Linux kernel 2.6. I use MySQL as authentication back-end. # dovecot --version 1.0.rc10 # dovecot --build-options Build options: ioloop=epoll notify=dnotify ipv6 openssl SQL drivers: mysql Passdb: checkpassword pam passwd passwd-file shadow sql Userdb: checkpassword passwd prefetch passwd-file sql static ----- config ----- protocols = pop3 imap disable_plaintext_auth = no ssl_disable = yes login_process_size = 128 login_process_per_connection = no login_processes_count = 16 login_max_connections = 512 login_greeting = ready auth_cache_size = 32768 auth_cache_ttl = 1800 auth_worker_max_count = 30 auth default { mechanisms = plain # Userdb settings are not used with proxy but there need to be something. userdb static { args = static uid=5000 gid=5000 home=/dev/null } passdb sql { args = /etc/dovecot-mysql.conf } user = root count = 1 } -- Laurent Papier

2 5

[Dovecot] Dovecot-ldap doesnt reconnect if openldap restarts
by Peter Nixon 07 Nov '06

07 Nov '06

Hi Guys I have recently migrated an existing courier install to dovecot + openldap and think dovecot is wonderfull. Great work! However, I am seeing that dovecot-ldap doesnt reconnect if openldap restarts. Is there an options I am missing or is this a know problem?As I am using dovecot for sasl with postfix and pop/imap this basically completely stops my mail sytem... Thanks in Advance -- Peter Nixon http://www.peternixon.net/ PGP Key: http://www.peternixon.net/public.asc

2 6

[Dovecot] move the message between folder problem with quota.
by Antonio Casado Rodríguez 07 Nov '06

07 Nov '06

Hi, i have dovecot 1.0rc12, postfix, RedHat Enterprise Linux ES 4.0 Update 4. IMAP client Thunderbird 1.5.0.7 Only namespace: namespace private { separator = / inbox = yes prefix = location = maildir:~/Maildir/ } When the quota limit is near... more maildirsize 5242880S 0 0 2688058 1 1993336 1 ... if i move the message betweeen foders, dovecot say: quota exceeded. Is this a error? If i delete the message (trash folder), it not work too. would not have to work as Maildir++ specification says? http://www.inter7.com/courierimap/README.maildirquota.html (Reading from a Maildir++) Thanks a lot.

2 1

[Dovecot] rc12 dovecot-auth core dump with ldap
by Chris Wakelin 07 Nov '06

07 Nov '06

Hi, I've got a core dump during initialisation when I use 1.0.rc12 and LDAP with authenticated binds in Solaris. It worked OK in 1.0.rc10. Here's the non-commented entries in dovecot-ldap.conf - some of which are probably redundant :) :- hosts = xxx.yyy.rdg.ac.uk auth_bind = yes auth_bind_userdn = "cn=%n,cn=users,dc=xxx,dc=yyy,dc=rdg,dc=ac,dc=uk" ldap_version = 3 base = "dc=xxx,dc=yyy,dc=rdg,dc=ac,dc=uk" deref = never scope = subtree user_filter = (&(objectClass=User)(sAMAccountName=%n)) pass_filter = (&(objectClass=User)(sAMAccountName=%n)) Strangely, it crashes in a different place when I don't define the scope, so I'm guessing it's something to do with reading parameters. backtrace with "scope = subtree" : #0 0x1ec94 in db_ldap_init ( config_path=0x5bc08 "/opt/RDGdovect/etc/dovecot-ldap.conf") at db-ldap.c:661 661 if (*conn->set.user_global_gid == '\0') (gdb) bt #0 0x1ec94 in db_ldap_init ( config_path=0x5bc08 "/opt/RDGdovect/etc/dovecot-ldap.conf") at db-ldap.c:661 #1 0x246e8 in passdb_ldap_preinit (auth_passdb=0x5bbe8, args=0x5bc08 "/opt/RDGdovect/etc/dovecot-ldap.conf") at passdb-ldap.c:486 #2 0x2328c in passdb_preinit (auth=0x5b838, driver=0xffbefec0 "ldap", args=0x0, id=332176) at passdb.c:169 #3 0x17648 in auth_preinit () at auth.c:45 #4 0x1ff0c in drop_privileges () at main.c:195 #5 0x2024c in main (argc=0, argv=0xffbefb54) at main.c:319 and with scope left commented out: #0 0xff0cf600 in strcasecmp () from /usr/lib/libc.so.1 (gdb) bt #0 0xff0cf600 in strcasecmp () from /usr/lib/libc.so.1 #1 0x1df58 in scope2str (str=0x0) at db-ldap.c:116 #2 0x1ec4c in db_ldap_init ( config_path=0x5bc08 "/opt/RDGdovect/etc/dovecot-ldap.conf") at db-ldap.c:648 #3 0x246e8 in passdb_ldap_preinit (auth_passdb=0x5bbe8, args=0x5bc08 "/opt/RDGdovect/etc/dovecot-ldap.conf") at passdb-ldap.c:486 #4 0x2328c in passdb_preinit (auth=0x5b838, driver=0xffbefec0 "ldap", args=0x0, id=332176) at passdb.c:169 #5 0x17648 in auth_preinit () at auth.c:45 #6 0x1ff0c in drop_privileges () at main.c:195 #7 0x2024c in main (argc=0, argv=0xffbefb54) at main.c:319 If I don't define "deref" then I get an error in the dovecot log (but no crash) :- dovecot: Nov 07 12:36:45 Error: auth(default): LDAP: Unknown deref option 'subtree' I'll keep digging and see if I can find the cause, but has anybody else seen this? Chris -- --+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+- Christopher Wakelin, c.d.wakelin(a)reading.ac.uk IT Services Centre, The University of Reading, Tel: +44 (0)118 378 8439 Whiteknights, Reading, RG6 2AF, UK Fax: +44 (0)118 975 3094

2 1

[Dovecot] suspected bug in dovecot-ldap setup?
by Pedro Venda 07 Nov '06

07 Nov '06

Hi everyone, [first post: long and boring. beware!] I've been working on a virtual multidomain MX server with pop3 access. Accounting for users/domains is done via OpenLDAP with the Jamm[1] schema and dovecot is 1.0rc10 (dovecot-1.0-0_27.rc10.el4.at fetched as RPM from atrpms.net for CentOS 4.4). I intended to have authenticated binds but there was a problem with the user_filter directive being ignored: user_filter = (&(objectClass=JammMailAccount)(mail=%n@%d)(accountActive=TRUE) (delete=FALSE)) dovecot: Oct 26 16:20:58 Info: auth(default): client in: AUTH 1 PLAIN service=IMAP secured lip=::ffff:192.168.0.5 rip=::ffff:192.168.0.69 resp=<hidden> dovecot: Oct 26 16:20:58 Info: auth(default): ldap(dave@info.test,::ffff:192.168.0.69): bind search: base=o=hosting,dc=example,dc=com scope=subtree filter= **(&(objectClass=posixAccount(uid=dave(a)info.test))** dovecot: Oct 26 16:20:58 Info: auth(default): ldap(dave@info.test,::ffff:192.168.0.69): unknown user dovecot: Oct 26 16:20:59 Info: auth(default): client out: FAIL 1 user=dave(a)info.test dovecot: Oct 26 16:20:59 Info: imap-login: Disconnected: user=<dave(a)info.test>, method=PLAIN, rip=::ffff:192.168.0.69, lip=::ffff:192.168.0.5, TLS (nevermind the data, it's test only) As you can see from the info file, the search filter used was being (&(objectClass=posixAccount(uid=dave(a)info.test)) and not (&(objectClass=JammMailAccount)(mail=dave(a)info.test)(accountActive=TRUE) (delete=FALSE)). I sorted this out by trying to enable auth_bind_userdn: auth_bind_userdn = mail=%n@%d,jvd=%d,o=hosting,dc=example,dc=com Now, the login worked well and the debug info is as follows: dovecot: Oct 27 12:01:48 Info: auth(default): client in: AUTH 1 PLAIN service=IMAP lip=::ffff:192.168.0.5 rip=::ffff:192.168.0.69 resp=AGRhdmVAaW5mb y50ZXN0AFRlbXAuMTIz dovecot: Oct 27 12:01:48 Info: auth(default): client out: OK 1 user=dave(a)info.test dovecot: Oct 27 12:01:48 Info: auth(default): master in: REQUEST 1 10634 1 dovecot: Oct 27 12:01:48 Info: auth(default): ldap(dave@info.test,::ffff:192.168.0.69): base=o=hosting,dc=example,dc=com scope=subtree filter=(&(objectClass=JammMailAccount)(mail=dave(a)info.test) (accountActive=TRUE)(delete=FALSE)) fields=mailbox dovecot: Oct 27 12:01:48 Info: auth(default): master out: USER 1 dave(a)info.test mail=info.test/dave/ uid=5000 gid=5000 (nevermind the debug data, passwords, etc. it's test only) In this case, the search filter is ok: (&(objectClass=JammMailAccount)(mail=dave(a)info.test)(accountActive=TRUE) (delete=FALSE)) So aparently, the auth_bind_userdn directive that supposedly adds a performance gain by sparing one bind request, seems to interfere with the user_filter directive. I suspect this might be a bug, so here's my report. Is this a new issue? Thanks for surviving this far through this post, Best regards, Pedro Venda. [1]: [Java Mail Manager]: web applications to manage virtual email account information stored in an LDAP directory. (http://jamm.sourceforge.net) -- Pedro João Lopes Venda email: pjvenda at pjvenda org http://www.pjvenda.org

2 5

[Dovecot] Store outgoing mail in users mailbox
by Mark Ruys 07 Nov '06

07 Nov '06

This might be a MTA question, but because I use Dovecot as an LDA, maybe some can help me here. Our users would like that outgoing mail is automatically saved in some folder, say Sent. We use Postfix with virtual domains, Maildir and Dovecot+Sieve as LDA. Outgoing mail is relayed by our imap-server (with authentification of course, no open relay). Most people seem to advice Postfix sender_bcc_maps and Dovecot's deliver with the -m argument. But I can't get it work. I tried: In master.cf: dovecot-archive unix - n n - - pipe flags=DRhu user=mailowner:mailowner argv=/usr/libexec/dovecot/deliver -d ${recipient} -m Sent In main.cf: sender_bcc_maps = hash:/etc/postfix/sender_bcc_map In sender_bcc_map: tester(a)ruijs.cc dovecot-archive: But that doesn't work. It looks like "dovecot-archive:" should be a real email address, not a transport (this give an idea of my Postfix knowledge ;). Then I tried: In sender_bcc_map: tester(a)ruijs.cc tester+archive(a)ruijs.cc But I don't think Dovecot's LDA supports plus addressing. So my question is, has anyone here done a similar thing in a similar setting. If so, how did you configure it. Thans, Mark Oudenhof 14b, 4191 NW Geldermalsen, The Netherlands Web site and travel directions: www.in2sports.net Phone +31.345.473699 :: Mobile +31.6.51298623

2 1

[Dovecot] Upgrade from RC7 to RC10 didn't go too well...
by Ivo Truxa 06 Nov '06

06 Nov '06

I have the same problem after upgrading to RC10. Did you find a solution? Should I update to RC11 or rather downgrade back to an earlier version? Thanks, Ivo Truxa >>>>>>> original message >>>>>>> Hi, On the weekend I tried to upgrade from RC7 to RC10. Clearly, I have to change some things before I can do this. What does it take to get to RC10? As is, my mail client got an error trying to list messages in /INBOX (via IMAP) and the mail.err log shows the following messages: Oct 29 10:27:32 siona dovecot: IMAP(archangel): open(/var/mail/archangel/inbox, O_CREAT) failed: Not a directory Oct 29 10:27:32 siona dovecot: IMAP(archangel): mkdir_parents(/var/mail/archangel/.imap/INBOX) failed: Not a directory Oct 29 10:27:32 siona dovecot: IMAP(archangel): open() failed with subscription file /var/mail/archangel/.subscriptions: Not a directory My dovecot.conf includes default_mail_env = mbox:/var/mail/%u And other then enabling SSL, I've got a pretty vanilla configuration (e.g. nothing in the IMAP section at all, no odd namespaces...) /var/mail/archangel is an mbox file, why is dovecot trying to open files under there? I know at least part of the discussion has happened on the list before so I'm sorry for duplicating other questions. My TODO is about ten km long so I hope someone can at least give me a couple good pointers. Thanks in advance! -- Dominic Lepiane The IRMACS Centre

3 2

[Dovecot] v1.0 plans, rc11 tomorrow
by Timo Sirainen 06 Nov '06

06 Nov '06

As you can probably guess from my today's burst of activity, I'm no longer extremely busy. Actually it looks like for the next 3-4 weeks I don't have anything especially time consuming to do. So it's time to get Dovecot v1.0 released :) I've now read all the mails from this list again, and it looks like pretty much the only problems with rc10 was the mbox assert crash, which is now fixed. My TODO contains: v1.0 blocker: - inetd logins are broken? I should look more into this.. I only remembered this just now while writing this mail. New non-v1.0 blockers: - trash plugin is apparently broken? - mbox_min_index_size != 0 causes Invalid new transaction log sequence (4 >= 4) The old preferrably-fixed-for-v1.0 items are: - ldap auth is leaking memory? maybe not, maybe it's something else. - master leaks log fds with kqueue. I don't have a machine to test this on. Could someone give me an account in some BSD system for a while to test this? Anyway, I'll most likely release rc11 tomorrow, but it would be nice if you tested today's CVS snapshot already to see if I accidentally broke something. :) http://dovecot.org/nightly/dovecot-latest.tar.gz Oh and one thing that I wanted for Dovecot v1.0 was nice documentation. I think the current wiki is a bit chaotic. I started http://wiki.dovecot.org/NewIndex a long time ago. Maybe I should finish it finally and put it as the new main index..

9 16

[Dovecot] Auto-expire messages in a folder
by Mike Cisar 05 Nov '06

05 Nov '06

I have a Fedora 5 server running Dovecot (currently 1.0 rc10). The spam filter (amavis) automatically tags email (using plussed addressing) such that messages flagged as spam are sorted into a "spambox" folder by procmail. Seemed like a good idea at the time, but because of some legacy issues with filesystem quota also being in place, combined with most users connecting with POP3 rather than IMAP... spam doesn't stay in their inbox, they don't check their spambox and they are very quickly over quota. What I would like to do is stick with the "spambox" folder idea, but have any messages in that folder which are older than a certain number of days deleted automatically. Could this be done by Dovecot? If so how would dovecot know to visit all the user's mailboxes to do it... or would it only be able to do so when a user logged in via IMAP (as opposed to POP3)? If not, is anyone aware of a script that I could run in nightly maintenance to do a cleanup pass on all the mailboxes? I know there are any number of ways that this could be accomplished but I would like to do it as much within my existing framework as possible... sendmail/procmail/amavis on the delivery side, dovecot in the middle, horde/imp for webmail and whatever email client the end users have (likely Outlook/Outlook Express for the most part)... all pretty generic, standard mailbox formats... nothing fancy like data stored in mySQL or anything like that. As everyone encounters, the more parts you change, the more other parts you have to fix to be compatible with the changes :-) Obviously I would like the solution to also be as feature rich as I can at the same time (might as well wish for it all right :-). Maybe for the sake of the POP3 folks it would also be nice to generate a once-daily email with the names, subjects of the messages in the folder saying "here's what is in your spam folder, please log in to webmail to manage your spam" (and in a perfect world some sort of link to click on which could move the message from the spambox back into the inbox). Does anyone have any solutions they can share that run within a similar framework to what I have set up? The thing that I need in the immediate term is to purge the spam folder automatically, the mid-term goal is to evolve that into a sort of spam-processing center/solution for the users. Thanks for any suggestions! Cheers, >>>>> Mike <<<<<

3 2

[Dovecot] ~/.maildir preferable to %h/Maildir and ~/Maildir?
by Jeff Kowalczyk 05 Nov '06

05 Nov '06

I have a recently deployed dovecot server and am readying another. Upon updating to rc12, I note the following change in the default dovecot.conf file: -default_mail_env = mbox:/var/spool/mail/%u:INDEX=/var/dovecot/%u +mail_location = maildir:~/.maildir Integrating this change to my local dovecot.conf: # formerly used default_mail_env = maildir:%h/Maildir # dovecot default mail_location = maildir:~/.maildir mail_location = maildir:~/Maildir With unix users of the form: myuser:x:505:100:My User:/home/myuser:/sbin/nologin each having ~/Maildir, should I: 1) use the ~/.maildir form over ~/Maildir. 2) use the ~ instead of %h 3) do anything for dovecot's benefit (reindex, etc.) besides a per-user 'mv ~/Maildir ~/.maildir' if 1). I came straight from an ancient sendmail mbox setup to dovecot, so I want to do things the best-pracitce IMAP/dovecot way. Thanks.

3 4

[Dovecot] RC11 Build Failure on FreeBSD 6.1
by Tim Wilde 05 Nov '06

05 Nov '06

I just ran into a build failure on Dovecot 1.0RC11 on FreeBSD 6.1. Identical command sequence for the build worked fine for RC10. uname -a: FreeBSD thor.krellis.org 6.1-RELEASE-p5 FreeBSD 6.1-RELEASE-p5 #0: Fri Sep 1 01:47:32 EDT 2006 root@jail7.jvds.com:/usr/obj/usr/src/sys/JAIL7 i386 Configured with a straight ./configure, no options, no problems reported during configure, but make failed with: if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT mountpoint.o -MD -MP -MF ".deps/mountpoint.Tpo" -c -o mountpoint.o mountpoint.c; then mv -f ".deps/mountpoint.Tpo" ".deps/mountpoint.Po"; else rm -f ".deps/mountpoint.Tpo"; exit 1; fi mountpoint.c:11:30: #if with no expression mountpoint.c:40: warning: unused parameter 'path' mountpoint.c:40: warning: unused parameter 'pool' *** Error code 1 Stop in /usr/home/tim/build/dovecot-1.0.rc11/src/lib. *** Error code 1 Stop in /usr/home/tim/build/dovecot-1.0.rc11/src. *** Error code 1 Stop in /usr/home/tim/build/dovecot-1.0.rc11. *** Error code 1 Stop in /usr/home/tim/build/dovecot-1.0.rc11. Full output of everything I did after untarring (I apologize in advance for any bad wrapping, I can attach as text/plain if necessary for diagnosis): [tim@thor ~/build/dovecot-1.0.rc11]$ ./configure checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... no checking for nawk... nawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for style of include used by make... GNU checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for library containing strerror... none required checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking dependency style of gcc... (cached) gcc3 checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for inline... inline checking build system type... i386-unknown-freebsd6.1 checking host system type... i386-unknown-freebsd6.1 checking for a sed that does not truncate output... /usr/bin/sed checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognise dependent libraries... pass_all checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking how to run the C++ preprocessor... g++ -E checking for g77... no checking for f77... f77 checking whether we are using the GNU Fortran 77 compiler... yes checking whether f77 accepts -g... yes checking the maximum length of command line arguments... 196608 checking command to parse /usr/bin/nm -B output from gcc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... yes checking dynamic linker characteristics... freebsd6.1 ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by g++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC checking if g++ PIC flag -fPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... freebsd6.1 ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for f77 option to produce PIC... -fPIC checking if f77 PIC flag -fPIC works... yes checking if f77 static flag -static works... yes checking if f77 supports -c -o file.o... yes checking whether the f77 linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... freebsd6.1 ld.so checking how to hardcode library paths into programs... immediate checking for ld used by GCC... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... /usr/local/bin/bash: ./config.rpath: No such file or directory done checking for iconv... no, consider installing GNU libiconv checking for strings.h... (cached) yes checking for stdint.h... (cached) yes checking for unistd.h... (cached) yes checking dirent.h usability... yes checking dirent.h presence... yes checking for dirent.h... yes checking sys/uio.h usability... yes checking sys/uio.h presence... yes checking for sys/uio.h... yes checking sys/sysmacros.h usability... no checking sys/sysmacros.h presence... no checking for sys/sysmacros.h... no checking sys/resource.h usability... yes checking sys/resource.h presence... yes checking for sys/resource.h... yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking libgen.h usability... yes checking libgen.h presence... yes checking for libgen.h... yes checking sys/quota.h usability... no checking sys/quota.h presence... no checking for sys/quota.h... no checking sys/fs/ufs_quota.h usability... no checking sys/fs/ufs_quota.h presence... no checking for sys/fs/ufs_quota.h... no checking ufs/ufs/quota.h usability... yes checking ufs/ufs/quota.h presence... yes checking for ufs/ufs/quota.h... yes checking jfs/quota.h usability... no checking jfs/quota.h presence... no checking for jfs/quota.h... no checking mntent.h usability... no checking mntent.h presence... no checking for mntent.h... no checking sys/mnttab.h usability... no checking sys/mnttab.h presence... no checking for sys/mnttab.h... no checking sys/event.h usability... yes checking sys/event.h presence... yes checking for sys/event.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking sys/mkdev.h usability... no checking sys/mkdev.h presence... no checking for sys/mkdev.h... no checking linux/dqblk_xfs.h usability... no checking linux/dqblk_xfs.h presence... no checking for linux/dqblk_xfs.h... no checking xfs/xqm.h usability... no checking xfs/xqm.h presence... no checking for xfs/xqm.h... no checking sasl.h usability... no checking sasl.h presence... no checking for sasl.h... no checking sasl/sasl.h usability... no checking sasl/sasl.h presence... no checking for sasl/sasl.h... no checking for socket... yes checking for inet_addr... yes checking for fdatasync... no checking for fdatasync in -lrt... no checking for fcntl... yes checking for flock... yes checking for lockf... yes checking for inet_aton... yes checking for sigaction... yes checking for getpagesize... yes checking for madvise... yes checking for strcasecmp... yes checking for stricmp... no checking for vsnprintf... yes checking for vsyslog... yes checking for writev... yes checking for pread... yes checking for setrlimit... yes checking for setproctitle... yes checking for seteuid... yes checking for setreuid... yes checking for setegid... yes checking for setresgid... yes checking for strtoull... yes checking for strtouq... yes checking for setpriority... yes checking for quotactl... yes checking for getmntent... no checking for kqueue... yes checking for kevent... yes checking for getrusage... yes checking for poll... yes checking if we can use inotify... "no" checking if we can use dnotify... "no" checking for int... yes checking size of int... 4 checking for long... yes checking size of long... 4 checking for void *... yes checking size of void *... 4 checking for long long... yes checking size of long long... 8 checking for _Bool... yes checking for uoff_t... no checking type of off_t... long long checking whether size_t is signed... no checking type of size_t... unsigned int checking for stdint.h... (cached) yes checking for uintmax_t... yes checking for uint_fast32_t... yes checking for socklen_t... yes checking for /dev/urandom... yes checking for tm_gmtoff... yes checking how large time_t values gmtime() accepts... 32 checking for struct iovec... yes checking Linux compatible mremap()... no checking whether shared mmaps get updated by write()s... yes checking whether fd passing works... yes checking for sendfile in -lsendfile... no checking Linux compatible sendfile()... no checking FreeBSD compatible sendfile()... yes checking if we should use _XPG6 macro for crypt()... yes checking if statvfs.f_mntfromname exists... no checking if statfs.f_mntfromname exists... yes checking if struct dqblk.dqb_curblocks exists... yes checking if struct dqblk.dqb_curspace exists... no checking if struct Q_QUOTACTL ioctl exists... no checking for an implementation of va_copy()... yes checking for an implementation of __va_copy()... no checking whether va_lists can be copied by value... yes checking for SSL_read in -lssl... yes checking openssl/ssl.h usability... yes checking openssl/ssl.h presence... yes checking for openssl/ssl.h... yes checking openssl/err.h usability... yes checking openssl/err.h presence... yes checking for openssl/err.h... yes checking for getspnam... no checking for pam_start in -lpam... yes checking security/pam_appl.h usability... yes checking security/pam_appl.h presence... yes checking for security/pam_appl.h... yes checking pam/pam_appl.h usability... no checking pam/pam_appl.h presence... no checking for pam/pam_appl.h... no checking for pam_setcred in -lpam... yes checking for auth_userokay... no checking for vpopmail configuration at ~vpopmail/etc/lib_deps... not found checking for crypt in -lcrypt... yes checking for dlopen... yes checking whether byte ordering is bigendian... no checking for IPv6... yes checking zlib.h usability... yes checking zlib.h presence... yes checking for zlib.h... yes configure: creating ./config.status config.status: creating Makefile config.status: creating doc/Makefile config.status: creating src/Makefile config.status: creating src/lib/Makefile config.status: creating src/lib-sql/Makefile config.status: creating src/lib-auth/Makefile config.status: creating src/lib-charset/Makefile config.status: creating src/lib-dict/Makefile config.status: creating src/lib-imap/Makefile config.status: creating src/lib-index/Makefile config.status: creating src/lib-mail/Makefile config.status: creating src/lib-ntlm/Makefile config.status: creating src/lib-settings/Makefile config.status: creating src/lib-storage/Makefile config.status: creating src/lib-storage/index/Makefile config.status: creating src/lib-storage/index/maildir/Makefile config.status: creating src/lib-storage/index/mbox/Makefile config.status: creating src/lib-storage/index/dbox/Makefile config.status: creating src/lib-storage/subscription-file/Makefile config.status: creating src/lib-storage/register/Makefile config.status: creating src/auth/Makefile config.status: creating src/deliver/Makefile config.status: creating src/dict/Makefile config.status: creating src/imap/Makefile config.status: creating src/imap-login/Makefile config.status: creating src/login-common/Makefile config.status: creating src/master/Makefile config.status: creating src/pop3/Makefile config.status: creating src/pop3-login/Makefile config.status: creating src/util/Makefile config.status: creating src/plugins/Makefile config.status: creating src/plugins/acl/Makefile config.status: creating src/plugins/convert/Makefile config.status: creating src/plugins/quota/Makefile config.status: creating src/plugins/imap-quota/Makefile config.status: creating src/plugins/trash/Makefile config.status: creating src/plugins/zlib/Makefile config.status: creating stamp.h config.status: creating dovecot-config.in config.status: creating config.h config.status: executing depfiles commands Install prefix ...................... : /usr/local File offsets ........................ : 64bit I/O loop method ..................... : poll File change notification method ..... : none Building with SSL support ........... : yes (OpenSSL) Building with IPv6 support .......... : yes Building with pop3 server ........... : yes Building with mail delivery agent .. : yes Building with GSSAPI support ........ : no Building with user database modules . : static prefetch passwd passwd-file checkpassword (modules) Building with password lookup modules : passwd passwd-file pam checkpassword (modules) Building with SQL drivers ............: [tim@thor ~/build/dovecot-1.0.rc11]$ make make all-recursive Making all in src Making all in lib if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT base64.o -MD -MP -MF ".deps/base64.Tpo" -c -o base64.o base64.c; then mv -f ".deps/base64.Tpo" ".deps/base64.Po"; else rm -f ".deps/base64.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT bsearch-insert-pos.o -MD -MP -MF ".deps/bsearch-insert-pos.Tpo" -c -o bsearch-insert-pos.o bsearch-insert-pos.c; then mv -f ".deps/bsearch-insert-pos.Tpo" ".deps/bsearch-insert-pos.Po"; else rm -f ".deps/bsearch-insert-pos.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT buffer.o -MD -MP -MF ".deps/buffer.Tpo" -c -o buffer.o buffer.c; then mv -f ".deps/buffer.Tpo" ".deps/buffer.Po"; else rm -f ".deps/buffer.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT close-keep-errno.o -MD -MP -MF ".deps/close-keep-errno.Tpo" -c -o close-keep-errno.o close-keep-errno.c; then mv -f ".deps/close-keep-errno.Tpo" ".deps/close-keep-errno.Po"; else rm -f ".deps/close-keep-errno.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT compat.o -MD -MP -MF ".deps/compat.Tpo" -c -o compat.o compat.c; then mv -f ".deps/compat.Tpo" ".deps/compat.Po"; else rm -f ".deps/compat.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT data-stack.o -MD -MP -MF ".deps/data-stack.Tpo" -c -o data-stack.o data-stack.c; then mv -f ".deps/data-stack.Tpo" ".deps/data-stack.Po"; else rm -f ".deps/data-stack.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT env-util.o -MD -MP -MF ".deps/env-util.Tpo" -c -o env-util.o env-util.c; then mv -f ".deps/env-util.Tpo" ".deps/env-util.Po"; else rm -f ".deps/env-util.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT failures.o -MD -MP -MF ".deps/failures.Tpo" -c -o failures.o failures.c; then mv -f ".deps/failures.Tpo" ".deps/failures.Po"; else rm -f ".deps/failures.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT fd-close-on-exec.o -MD -MP -MF ".deps/fd-close-on-exec.Tpo" -c -o fd-close-on-exec.o fd-close-on-exec.c; then mv -f ".deps/fd-close-on-exec.Tpo" ".deps/fd-close-on-exec.Po"; else rm -f ".deps/fd-close-on-exec.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT fd-set-nonblock.o -MD -MP -MF ".deps/fd-set-nonblock.Tpo" -c -o fd-set-nonblock.o fd-set-nonblock.c; then mv -f ".deps/fd-set-nonblock.Tpo" ".deps/fd-set-nonblock.Po"; else rm -f ".deps/fd-set-nonblock.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT fdpass.o -MD -MP -MF ".deps/fdpass.Tpo" -c -o fdpass.o fdpass.c; then mv -f ".deps/fdpass.Tpo" ".deps/fdpass.Po"; else rm -f ".deps/fdpass.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT file-cache.o -MD -MP -MF ".deps/file-cache.Tpo" -c -o file-cache.o file-cache.c; then mv -f ".deps/file-cache.Tpo" ".deps/file-cache.Po"; else rm -f ".deps/file-cache.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT file-copy.o -MD -MP -MF ".deps/file-copy.Tpo" -c -o file-copy.o file-copy.c; then mv -f ".deps/file-copy.Tpo" ".deps/file-copy.Po"; else rm -f ".deps/file-copy.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT file-dotlock.o -MD -MP -MF ".deps/file-dotlock.Tpo" -c -o file-dotlock.o file-dotlock.c; then mv -f ".deps/file-dotlock.Tpo" ".deps/file-dotlock.Po"; else rm -f ".deps/file-dotlock.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT file-lock.o -MD -MP -MF ".deps/file-lock.Tpo" -c -o file-lock.o file-lock.c; then mv -f ".deps/file-lock.Tpo" ".deps/file-lock.Po"; else rm -f ".deps/file-lock.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT file-set-size.o -MD -MP -MF ".deps/file-set-size.Tpo" -c -o file-set-size.o file-set-size.c; then mv -f ".deps/file-set-size.Tpo" ".deps/file-set-size.Po"; else rm -f ".deps/file-set-size.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT hash.o -MD -MP -MF ".deps/hash.Tpo" -c -o hash.o hash.c; then mv -f ".deps/hash.Tpo" ".deps/hash.Po"; else rm -f ".deps/hash.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT hex-binary.o -MD -MP -MF ".deps/hex-binary.Tpo" -c -o hex-binary.o hex-binary.c; then mv -f ".deps/hex-binary.Tpo" ".deps/hex-binary.Po"; else rm -f ".deps/hex-binary.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT hex-dec.o -MD -MP -MF ".deps/hex-dec.Tpo" -c -o hex-dec.o hex-dec.c; then mv -f ".deps/hex-dec.Tpo" ".deps/hex-dec.Po"; else rm -f ".deps/hex-dec.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT hmac-md5.o -MD -MP -MF ".deps/hmac-md5.Tpo" -c -o hmac-md5.o hmac-md5.c; then mv -f ".deps/hmac-md5.Tpo" ".deps/hmac-md5.Po"; else rm -f ".deps/hmac-md5.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT home-expand.o -MD -MP -MF ".deps/home-expand.Tpo" -c -o home-expand.o home-expand.c; then mv -f ".deps/home-expand.Tpo" ".deps/home-expand.Po"; else rm -f ".deps/home-expand.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT hostpid.o -MD -MP -MF ".deps/hostpid.Tpo" -c -o hostpid.o hostpid.c; then mv -f ".deps/hostpid.Tpo" ".deps/hostpid.Po"; else rm -f ".deps/hostpid.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT imem.o -MD -MP -MF ".deps/imem.Tpo" -c -o imem.o imem.c; then mv -f ".deps/imem.Tpo" ".deps/imem.Po"; else rm -f ".deps/imem.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT iostream.o -MD -MP -MF ".deps/iostream.Tpo" -c -o iostream.o iostream.c; then mv -f ".deps/iostream.Tpo" ".deps/iostream.Po"; else rm -f ".deps/iostream.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT istream.o -MD -MP -MF ".deps/istream.Tpo" -c -o istream.o istream.c; then mv -f ".deps/istream.Tpo" ".deps/istream.Po"; else rm -f ".deps/istream.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT istream-data.o -MD -MP -MF ".deps/istream-data.Tpo" -c -o istream-data.o istream-data.c; then mv -f ".deps/istream-data.Tpo" ".deps/istream-data.Po"; else rm -f ".deps/istream-data.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT istream-file.o -MD -MP -MF ".deps/istream-file.Tpo" -c -o istream-file.o istream-file.c; then mv -f ".deps/istream-file.Tpo" ".deps/istream-file.Po"; else rm -f ".deps/istream-file.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT istream-limit.o -MD -MP -MF ".deps/istream-limit.Tpo" -c -o istream-limit.o istream-limit.c; then mv -f ".deps/istream-limit.Tpo" ".deps/istream-limit.Po"; else rm -f ".deps/istream-limit.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT istream-mmap.o -MD -MP -MF ".deps/istream-mmap.Tpo" -c -o istream-mmap.o istream-mmap.c; then mv -f ".deps/istream-mmap.Tpo" ".deps/istream-mmap.Po"; else rm -f ".deps/istream-mmap.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT istream-seekable.o -MD -MP -MF ".deps/istream-seekable.Tpo" -c -o istream-seekable.o istream-seekable.c; then mv -f ".deps/istream-seekable.Tpo" ".deps/istream-seekable.Po"; else rm -f ".deps/istream-seekable.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT ioloop.o -MD -MP -MF ".deps/ioloop.Tpo" -c -o ioloop.o ioloop.c; then mv -f ".deps/ioloop.Tpo" ".deps/ioloop.Po"; else rm -f ".deps/ioloop.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT ioloop-iolist.o -MD -MP -MF ".deps/ioloop-iolist.Tpo" -c -o ioloop-iolist.o ioloop-iolist.c; then mv -f ".deps/ioloop-iolist.Tpo" ".deps/ioloop-iolist.Po"; else rm -f ".deps/ioloop-iolist.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT ioloop-notify-none.o -MD -MP -MF ".deps/ioloop-notify-none.Tpo" -c -o ioloop-notify-none.o ioloop-notify-none.c; then mv -f ".deps/ioloop-notify-none.Tpo" ".deps/ioloop-notify-none.Po"; else rm -f ".deps/ioloop-notify-none.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT ioloop-notify-dn.o -MD -MP -MF ".deps/ioloop-notify-dn.Tpo" -c -o ioloop-notify-dn.o ioloop-notify-dn.c; then mv -f ".deps/ioloop-notify-dn.Tpo" ".deps/ioloop-notify-dn.Po"; else rm -f ".deps/ioloop-notify-dn.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT ioloop-notify-inotify.o -MD -MP -MF ".deps/ioloop-notify-inotify.Tpo" -c -o ioloop-notify-inotify.o ioloop-notify-inotify.c; then mv -f ".deps/ioloop-notify-inotify.Tpo" ".deps/ioloop-notify-inotify.Po"; else rm -f ".deps/ioloop-notify-inotify.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT ioloop-notify-kqueue.o -MD -MP -MF ".deps/ioloop-notify-kqueue.Tpo" -c -o ioloop-notify-kqueue.o ioloop-notify-kqueue.c; then mv -f ".deps/ioloop-notify-kqueue.Tpo" ".deps/ioloop-notify-kqueue.Po"; else rm -f ".deps/ioloop-notify-kqueue.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT ioloop-poll.o -MD -MP -MF ".deps/ioloop-poll.Tpo" -c -o ioloop-poll.o ioloop-poll.c; then mv -f ".deps/ioloop-poll.Tpo" ".deps/ioloop-poll.Po"; else rm -f ".deps/ioloop-poll.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT ioloop-select.o -MD -MP -MF ".deps/ioloop-select.Tpo" -c -o ioloop-select.o ioloop-select.c; then mv -f ".deps/ioloop-select.Tpo" ".deps/ioloop-select.Po"; else rm -f ".deps/ioloop-select.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT ioloop-epoll.o -MD -MP -MF ".deps/ioloop-epoll.Tpo" -c -o ioloop-epoll.o ioloop-epoll.c; then mv -f ".deps/ioloop-epoll.Tpo" ".deps/ioloop-epoll.Po"; else rm -f ".deps/ioloop-epoll.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT ioloop-kqueue.o -MD -MP -MF ".deps/ioloop-kqueue.Tpo" -c -o ioloop-kqueue.o ioloop-kqueue.c; then mv -f ".deps/ioloop-kqueue.Tpo" ".deps/ioloop-kqueue.Po"; else rm -f ".deps/ioloop-kqueue.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT lib.o -MD -MP -MF ".deps/lib.Tpo" -c -o lib.o lib.c; then mv -f ".deps/lib.Tpo" ".deps/lib.Po"; else rm -f ".deps/lib.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT lib-signals.o -MD -MP -MF ".deps/lib-signals.Tpo" -c -o lib-signals.o lib-signals.c; then mv -f ".deps/lib-signals.Tpo" ".deps/lib-signals.Po"; else rm -f ".deps/lib-signals.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT md4.o -MD -MP -MF ".deps/md4.Tpo" -c -o md4.o md4.c; then mv -f ".deps/md4.Tpo" ".deps/md4.Po"; else rm -f ".deps/md4.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT md5.o -MD -MP -MF ".deps/md5.Tpo" -c -o md5.o md5.c; then mv -f ".deps/md5.Tpo" ".deps/md5.Po"; else rm -f ".deps/md5.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT mempool.o -MD -MP -MF ".deps/mempool.Tpo" -c -o mempool.o mempool.c; then mv -f ".deps/mempool.Tpo" ".deps/mempool.Po"; else rm -f ".deps/mempool.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT mempool-alloconly.o -MD -MP -MF ".deps/mempool-alloconly.Tpo" -c -o mempool-alloconly.o mempool-alloconly.c; then mv -f ".deps/mempool-alloconly.Tpo" ".deps/mempool-alloconly.Po"; else rm -f ".deps/mempool-alloconly.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT mempool-datastack.o -MD -MP -MF ".deps/mempool-datastack.Tpo" -c -o mempool-datastack.o mempool-datastack.c; then mv -f ".deps/mempool-datastack.Tpo" ".deps/mempool-datastack.Po"; else rm -f ".deps/mempool-datastack.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT mempool-system.o -MD -MP -MF ".deps/mempool-system.Tpo" -c -o mempool-system.o mempool-system.c; then mv -f ".deps/mempool-system.Tpo" ".deps/mempool-system.Po"; else rm -f ".deps/mempool-system.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT mempool-unsafe-datastack.o -MD -MP -MF ".deps/mempool-unsafe-datastack.Tpo" -c -o mempool-unsafe-datastack.o mempool-unsafe-datastack.c; then mv -f ".deps/mempool-unsafe-datastack.Tpo" ".deps/mempool-unsafe-datastack.Po"; else rm -f ".deps/mempool-unsafe-datastack.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT mkdir-parents.o -MD -MP -MF ".deps/mkdir-parents.Tpo" -c -o mkdir-parents.o mkdir-parents.c; then mv -f ".deps/mkdir-parents.Tpo" ".deps/mkdir-parents.Po"; else rm -f ".deps/mkdir-parents.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT mmap-anon.o -MD -MP -MF ".deps/mmap-anon.Tpo" -c -o mmap-anon.o mmap-anon.c; then mv -f ".deps/mmap-anon.Tpo" ".deps/mmap-anon.Po"; else rm -f ".deps/mmap-anon.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT mmap-util.o -MD -MP -MF ".deps/mmap-util.Tpo" -c -o mmap-util.o mmap-util.c; then mv -f ".deps/mmap-util.Tpo" ".deps/mmap-util.Po"; else rm -f ".deps/mmap-util.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT module-dir.o -MD -MP -MF ".deps/module-dir.Tpo" -c -o module-dir.o module-dir.c; then mv -f ".deps/module-dir.Tpo" ".deps/module-dir.Po"; else rm -f ".deps/module-dir.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT mountpoint.o -MD -MP -MF ".deps/mountpoint.Tpo" -c -o mountpoint.o mountpoint.c; then mv -f ".deps/mountpoint.Tpo" ".deps/mountpoint.Po"; else rm -f ".deps/mountpoint.Tpo"; exit 1; fi mountpoint.c:11:30: #if with no expression mountpoint.c:40: warning: unused parameter 'path' mountpoint.c:40: warning: unused parameter 'pool' *** Error code 1 Stop in /usr/home/tim/build/dovecot-1.0.rc11/src/lib. *** Error code 1 Stop in /usr/home/tim/build/dovecot-1.0.rc11/src. *** Error code 1 Stop in /usr/home/tim/build/dovecot-1.0.rc11. *** Error code 1 Stop in /usr/home/tim/build/dovecot-1.0.rc11. I don't /think/ I did anything or changed anything from rc10 to rc11 that would cause this. Any assistance would be greatly appreciated. Regards, Tim Wilde

3 3

[Dovecot] Sending email using IMAP
by Marc Perkel 05 Nov '06

05 Nov '06

This is something for after the 1.0 release but I think it's important and I'm going to try to figure out how to make it happen. I'd like to see some way to pass outgoing email from Thunderbird back to dovecot through some new command that we would have to make up. Email would be sent back over the IMAP connection and when Dovecot gets it dovecot would hand it off to an SMTP server that would deliver it. If a crude experimental spec can be written I'll try to find someone on the Thunderbird side to write some sort of module to talk to it. The reason for this is that I think that the elimination of SMTP from the client is a big step to control spam. The idea being that if IMAP can transfer outgoing mail the SMTP wouldn't be necessary for clients and we can block port 25 on windows machines and viruses can't send email. And the virus wouldn't have access to the IMAP password so viruses can't authenticate to send mail. So - the key question is - what would it take to create an outgoing spec for sending email over IMAP? Like to see something clean and simple.

20 36

[Dovecot] trash plugin not working as expected
by Robert Schetterer 04 Nov '06

04 Nov '06

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi @ll ,i use dovecot 1.rc7 setting in dovecot.conf protocol imap { mail_plugins = quota imap_quota } protocol pop3 { mail_plugins = quota } plugin { quota = maildir trash = /etc/dovecot/dovecot-trash.conf } dovecot-trash.conf file 1 Sent results in Disconnected: Too many invalid IMAP commands when i try to sent mails from a mailbox which is nearly full with inbox and Sent mails folder I expected the oldest mail in Sent to be deleted before copy to Sent after deliver. as described here http://wiki.dovecot.org/Plugins/Trash the client was squirrelmail 1.48 the setup works very nice without having tras installed sombody with an idea, or did i miss something in the conf or missunderstood the wiki? - -- Mit freundlichen Gruessen Best Regards Robert Schetterer robert_at_schetterer_dot_org Munich / Bavaria / Germany https://www.schetterer.org https://www.schetterer.com/public-gpg-robert-schetterer.key -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (MingW32) iD8DBQFFL9a6NxddAhXBw7QRAsusAKCeeGoK5ePoc7ccO6UHbsextBbJSwCfd1ry aBhnaGZSVizfwunNU0iZYZ4= =jtrL -----END PGP SIGNATURE----- -- Diese Nachricht wurde auf Viren und andere gefährliche Inhalte untersucht und ist - aktuelle Virenscanner vorausgesetzt - sauber.

2 1

[Dovecot] INIT startup script for Fedora Core 5
by jaysen＠emtjaysen.net 04 Nov '06

04 Nov '06

4 3

[Dovecot] MySQL Configuration
by Gerard Seibert 04 Nov '06

04 Nov '06

Dovecot 1.0.rc10 FreeBSD 6.1 This is probably a dumb question; however, I have never let a little thing like that bother me in the past. In the 'dovecot.conf' file there are the follow two sections: # SQL database passdb sql { # Path for SQL configuration file, see doc/dovecot-sql.conf for example args = /usr/local/etc/dovecot-sql.conf } userdb sql { # Path for SQL configuration file, see doc/dovecot-sql.conf for example args = /usr/local/etc/dovecot-sql.conf } I keep the 'users' and their respective 'passwords' in the same MySQL database. I am not sure why I wouldn't. Therefore, would it not make more sense to have just one MySQL configuration line in the 'dovecot.conf' file rather than two, or am I missing something here? -- Gerard Seibert gerard(a)seibercom.net Laws are like sausages. It's better not to see them being made. Otto von Bismarck

2 1

[Dovecot] auth-req-handler.c adds spurious tab
by Chris Laif 04 Nov '06

04 Nov '06

If the auth backend (postgresql in my case) returns extra fields, and all of these extra_fields begin with 'userdb_', the auth_callback functions adds an unwanted extra tab at the end of the response: auth(default): client out: OK^I8^Iuser=foo@bar^I This extra tab at the end confuses exim's dovecot-auth handler (the exim-dovecot auth handler does not correctly count the number of returned fields then (side note: the code on exim's side should probably be cleaned up as well)). A quick fix is attached below. Chris --- src/auth/auth-request-handler.c.orig 2006-11-03 13:10:35.000000000 +0100 +++ src/auth/auth-request-handler.c 2006-11-03 13:08:32.000000000 +0100 @@ -139,6 +139,10 @@ str_append(str, fields[src]); } } + + if (str_len(str) == 0) + return NULL; + return str_c(str); }

2 1

[Dovecot] mbox sync: Expunged message reappeared in mailbox
by Jim Garrison 04 Nov '06

04 Nov '06

Starting at 05:32 this morning, one user on my dovecot server is receiving hundreds of copies of old email. This is a short excerpt from my dovecot.log showing the problem: > dovecot: Nov 03 05:27:02 Info: pop3-login: Login: > user=<howard(a)obfusca.ted>, method=PLAIN, rip=::ffff:81.44.31.210, > lip=::ffff:zz.zz.zz.zz, TLS > dovecot: Nov 03 05:27:02 Info: POP3(howard(a)obfusca.ted): Disconnected: > Logged out top=0/0, retr=0/0, del=0/0, size=0 > dovecot: Nov 03 05:32:01 Error: POP3(joyce(a)obfusca.ted): mbox sync: > Expunged message reappeared in mailbox > /var/mail/vhosts/obfusca.ted/joyce (UID 1443 < 1446, seq=2, idx_msgs=0) > dovecot: Nov 03 05:32:01 Info: pop3-login: Login: > user=<joyce(a)obfusca.ted>, method=PLAIN, rip=::ffff:67.9.149.201, > lip=::ffff:zz.zz.zz.zz, TLS > dovecot: Nov 03 05:32:02 Info: pop3-login: Login: > user=<howard(a)obfusca.ted>, method=PLAIN, rip=::ffff:81.44.31.210, > lip=::ffff:zz.zz.zz.zz, TLS > dovecot: Nov 03 05:32:03 Info: POP3(joyce(a)obfusca.ted): Disconnected: > Logged out top=0/0, retr=3/163473, del=3/3, size=163419 > dovecot: Nov 03 05:32:03 Error: POP3(joyce(a)obfusca.ted): mbox sync: > Expunged message reappeared in mailbox > /var/mail/vhosts/obfusca.ted/joyce (UID 1443 < 1449, seq=2, idx_msgs=0) > dovecot: Nov 03 05:32:03 Info: POP3(howard(a)obfusca.ted): Disconnected: > Logged out top=0/0, retr=0/0, del=0/0, size=0 > dovecot: Nov 03 05:37:02 Info: pop3-login: Login: > user=<howard(a)obfusca.ted>, method=PLAIN, rip=::ffff:81.44.31.210, > lip=::ffff:zz.zz.zz.zz, TLS > dovecot: Nov 03 05:37:03 Info: POP3(howard(a)obfusca.ted): Disconnected: > Logged out top=0/0, retr=0/0, del=0/3, size=0 > dovecot: Nov 03 05:42:01 Info: pop3-login: Login: > user=<joyce(a)obfusca.ted>, method=PLAIN, rip=::ffff:67.9.149.201, > lip=::ffff:zz.zz.zz.zz, TLS > dovecot: Nov 03 05:42:02 Info: pop3-login: Login: > user=<howard(a)obfusca.ted>, method=PLAIN, rip=::ffff:81.44.31.210, > lip=::ffff:zz.zz.zz.zz, TLS > dovecot: Nov 03 05:42:02 Info: POP3(howard(a)obfusca.ted): Disconnected: > Logged out top=0/0, retr=0/0, del=0/0, size=0 > dovecot: Nov 03 05:42:03 Info: POP3(joyce(a)obfusca.ted): Disconnected: > Logged out top=0/0, retr=3/163461, del=3/3, size=0 > dovecot: Nov 03 05:47:02 Info: pop3-login: Login: > user=<howard(a)obfusca.ted>, method=PLAIN, rip=::ffff:81.44.31.210, > lip=::ffff:zz.zz.zz.zz, TLS > dovecot: Nov 03 05:47:02 Info: POP3(howard(a)obfusca.ted): Disconnected: > Logged out top=0/0, retr=0/0, del=0/0, size=0 > dovecot: Nov 03 05:52:01 Error: POP3(joyce(a)obfusca.ted): mbox sync: > Expunged message reappeared in mailbox > /var/mail/vhosts/obfusca.ted/joyce (UID 1449 < 1452, seq=2, idx_msgs=0) > dovecot: Nov 03 05:52:01 Info: pop3-login: Login: > user=<joyce(a)obfusca.ted>, method=PLAIN, rip=::ffff:67.9.149.201, > lip=::ffff:zz.zz.zz.zz, TLS > dovecot: Nov 03 05:52:02 Info: pop3-login: Login: > user=<howard(a)obfusca.ted>, method=PLAIN, rip=::ffff:81.44.31.210, > lip=::ffff:zz.zz.zz.zz, TLS > dovecot: Nov 03 05:52:02 Info: POP3(howard(a)obfusca.ted): Disconnected: > Logged out top=0/0, retr=0/0, del=0/0, size=0 > dovecot: Nov 03 05:52:03 Info: POP3(joyce(a)obfusca.ted): Disconnected: > Logged out top=0/0, retr=3/163473, del=3/3, size=163419 > dovecot: Nov 03 05:52:03 Error: POP3(joyce(a)obfusca.ted): mbox sync: > Expunged message reappeared in mailbox > /var/mail/vhosts/obfusca.ted/joyce (UID 1449 < 1455, seq=2, idx_msgs=0) > dovecot: Nov 03 05:57:02 Info: pop3-login: Login: > user=<howard(a)obfusca.ted>, method=PLAIN, rip=::ffff:81.44.31.210, > lip=::ffff:zz.zz.zz.zz, TLS > dovecot: Nov 03 05:57:03 Info: POP3(howard(a)obfusca.ted): Disconnected: > Logged out top=0/0, retr=0/0, del=0/3, size=0 > dovecot: Nov 03 06:02:01 Info: pop3-login: Login: > user=<joyce(a)obfusca.ted>, method=PLAIN, rip=::ffff:67.9.149.201, > lip=::ffff:zz.zz.zz.zz, TLS > dovecot: Nov 03 06:02:02 Info: pop3-login: Login: > user=<howard(a)obfusca.ted>, method=PLAIN, rip=::ffff:81.44.31.210, > lip=::ffff:zz.zz.zz.zz, TLS > dovecot: Nov 03 06:02:02 Info: POP3(howard(a)obfusca.ted): Disconnected: > Logged out top=0/0, retr=0/0, del=0/0, size=0 > dovecot: Nov 03 06:02:02 Info: POP3(joyce(a)obfusca.ted): Disconnected: > Logged out top=0/0, retr=3/163461, del=3/3, size=0 > dovecot: Nov 03 06:07:02 Info: pop3-login: Login: > user=<howard(a)obfusca.ted>, method=PLAIN, rip=::ffff:81.44.31.210, > lip=::ffff:zz.zz.zz.zz, TLS > dovecot: Nov 03 06:07:02 Info: POP3(howard(a)obfusca.ted): Disconnected: > Logged out top=0/0, retr=0/0, del=0/0, size=0 > dovecot: Nov 03 06:12:01 Error: POP3(joyce(a)obfusca.ted): mbox sync: > Expunged message reappeared in mailbox > /var/mail/vhosts/obfusca.ted/joyce (UID 1455 < 1458, seq=2, idx_msgs=0) Dovecot version: [jhg@helios ~]$ rpm -q dovecot dovecot-1.0-0.beta8.2.fc5 The MTA is postfix, and this is the first time this has ever happened. I made a copy of the mbox file, and find that it's over a megabyte long. Checking the postfix maillog I find that only three messages arrived for that user in the hour preceding the start of this behavior (all SPAM). No other users are affected, and I can't see anything obviously wrong in the mbox file. Could a bad message cause this?

2 2

[Dovecot] Server-side mail archiving - possible dovecot lda feature?
by Charles Marcus 03 Nov '06

03 Nov '06

Hi Timo, I have a question on the feasibility of adding the capability directly in dovecot LDA (or maybe this wouldn't be the correct place?) to provide a server-side mail archiving feature. What I'd like is a simple way to define a maildir, ie: vmail/archive/$user/Inbox and vmail/archive/$user/Inbox.Sent And then have the dovecot LDA deliver a copy of all mail (incoming and outgoing) to this archive folder. Is the dovecot LDA the best place for this to go? Or would an entirely new plug-in be more appropriate? My boss may be willing to pay to have this capability added. I have investigated other third party solutions, but I would prefer something that is tightly integrated with dovecot. I look forward to your response... -- Best regards, Charles

5 9

[Dovecot] Authentication in outlook
by Paul Aguirre 03 Nov '06

03 Nov '06

Hi all, I have instaled dovecot 1.0.rc10, and my configuration works fine if I get the mail with Evolution mail client, bu if I try to use outlook to get mails the authentication fail and I can't pass through the logon window. The maillog appear this message: dovecot: pop3-login: Disconnected: rip=192.168.0.22, lip=192.168.0.1 My dovecot configuration is: protocols = pop3 ssl_disable = yes mail_extra_groups = mail protocol imap { } protocol pop3 { pop3_uidl_format = %v.%u } protocol lda { postmaster_address = postmaster(a)example.com } auth_username_translation = "@." auth default { mechanisms = plain passdb pam { } userdb passwd { } user = root } dict { } plugin { } any idea to solve. thanks Paul

6 7

Re: [Dovecot] installation problem
by jaysen＠emtjaysen.net 03 Nov '06

03 Nov '06

2 1

[Dovecot] Last connection date/time
by Luigi Rosa 03 Nov '06

03 Nov '06

Hi, in an installation of Dovecot I need to know when each user made his/her last POP3 connection in a maildir environment. The date of which of the index files maintained by Dovecot can I use to get this information? Thanks. Ciao, luigi -- / +--[Luigi Rosa]-- \ Left-Handers have rights too.

2 1

[Dovecot] any idea why the mail downloading is slow?
by LeVA 03 Nov '06

03 Nov '06

Hi! I'm using rc10, but had this problem with previous releases too. Not sure if this is a dovecot problem, but I can not think of anything else. The mail downloading with pop3 is ~very slow, approx. 20 Kbyte / sec. no matter how many mails I've got in my mailbox, or how big are the mails. My ISP provides me a dedicated 100mbit line, and everything else works as fast as expected eg. http, ftp, scp... The OS is OpenBSD 3.9-stable and the system is not under heavy load at all. I've tried to turn off TLS but there was no change. Is the pop3 protocol this slow by design or there is something wrong with my setup? Thanks! Daniel -- LeVA

2 4

[Dovecot] installation problem
by jaysen＠emtjaysen.net 03 Nov '06

03 Nov '06

2 1

[Dovecot] CRAM-MD5 auth broken with postgresql passdb?
by Chris Laif 03 Nov '06

03 Nov '06

I'm currently experiencing a problem which has already been described by Jonathan in http://www.dovecot.org/list/dovecot/2006-August/015501.html If I use CRAM-MD5 auth with passwd-file as a backend (Thunderbird client) everything works fine (MD5-hashes have been shortened for readability): dovecot: auth(default): password(bob(a)foo.bar,10.0.0.123): Credentials: f12c884ba3cc82.. dovecot: imap-login: Login: user=<bob(a)foo.bar>, method=CRAM-MD5, rip=10.0.0.123, lip=10.0.0.234 My passwd file contains a line like this: bob@foo.bar:{HMAC-MD5}f12c884ba3cc82.. If I change to postgresql-based passdb, PLAIN auth works (!) and CRAM-MD5 does not work: dovecot: auth(default): sql(bob(a)foo.bar,10.0.0.123): query: SELECT 'bob(a)foo.bar' AS user, '{HMAC-MD5}f12c884ba3cc82..' AS password dovecot: auth(default): password(bob(a)foo.bar,10.0.0.123): Credentials: dovecot: auth(default): cram-md5(bob(a)foo.bar,10.0.0.123): password mismatch Please note the ultra-simple SELECT-statement (I've tried other combinations as well - no success). sql.conf setting is "default_pass_scheme = HMAC-MD5". Dovecot version 1.0.rc10. In the postgresql-based example the "Credentials:" variable is empty. I wonder if this is a bug in dovecot. Please let me know if you need any further information to resolve this issue. Thanks, Chris (As a side not I still do not understand how CRAM-MD5 auth is able to work without a plain text password, but that's another story. If it works with an HMAC-MD5 hash in a passwd-file backend it should work with the postgresql-db backend as well.)

2 3

[Dovecot] quota question
by Jakob Curdes 03 Nov '06

03 Nov '06

.. maybe a silly one, but how does the user get notified when he is over quota? Did not find anything in the docs. Is there a general IMAP way to do this or what else ? Yours JC

4 4

[Dovecot] Check plugin loading for LDA and dovecot-sieve
by Will Prater 03 Nov '06

03 Nov '06

Hello, I found this thread: http://www.dovecot.org/list/dovecot/2006- September/015955.html and have successfully compiled and installed cmusieve plugin. How does one test to make sure its being loaded? It's not parsing my sieve files in the users homes and I'd like to first check if the plugin is being loaded, since I am getting no errors about it. Thanks

2 3

[Dovecot] Postfix + Dovecot LDA Problem
by Steven F Siirila 03 Nov '06

03 Nov '06

I am having a problem setting up a server to handle e-mail in a way in which it had always done traditionally, but with Postfix+Dovecot LDA. Here's a rundown... Solaris 9 Postfix 2.3.3 Dovecot 1.0.rc10 Postfix non-defaults (postconf -n): alias_maps = dbm:/etc/mail/aliases command_directory = /opt/postfix/sbin config_directory = /etc/opt/postfix daemon_directory = /opt/postfix/libexec debug_peer_level = 2 html_directory = no inet_interfaces = $myhostname mail_owner = postfix mailbox_command = /opt/dovecot/libexec/dovecot/deliver -f "$SENDER" mailq_path = /opt/postfix/bin/mailq manpage_directory = /opt/postfix/man masquerade_domains = tc.umn.edu masquerade_exceptions = root mydestination = $myhostname mynetworks = 127.0.0.0/8, ... (omitted) myorigin = $mydomain newaliases_path = /opt/postfix/bin/newaliases queue_directory = /var/spool/postfix readme_directory = no relayhost = [omitted.tc.umn.edu] sample_directory = /etc/opt/postfix sendmail_path = /opt/postfix/sbin/sendmail setgid_group = postdrop smtpd_client_restrictions = permit_mynetworks, reject unknown_local_recipient_reject_code = 550 This works just like our old MTA, with one exception: sending e-mail to addresses within our domain (@tc.umn.edu) requires us to specify the @tc.umn.edu -- otherwise it is rejected with a message like alias(a)host.tc.umn.edu does not exist. I want such messages to be relayed to the relayhost. When I set mydestination to null, and luser_relay = $user@$domain the message goes into a black hole (I never get the message, nor do I get an NDN.) I am posting this to both the Dovecot and Postfix lists since I'm not sure where the fault lies, configuration- or software-wise. Thanks in advance for any helpful tips. -- Steven F. Siirila Office: Lind Hall, Room 130B Internet Services E-mail: sfs(a)umn.edu Office of Information Technology Voice: (612) 626-0244 University of Minnesota Fax: (612) 626-7593

1 0

[Dovecot] errors on copying messages to sent-mail
by Herr Nagengast 03 Nov '06

03 Nov '06

Howdy, In rc10 I'm still experiencing the occasional error copying mail to my sent messages folder. This is on Thunderbird 1.5.0.7 on a Mac. My configure command: ./configure --without-shadow --localstatedir=/var -with-cyrus-sasl2 --without-gssapi --without-vpopmail --prefix=/usr/local --build=i386-portbld-freebsd5.3 FYI, Todd

2 2

[Dovecot] compiling dovecot-sieve
by Fintec 02 Nov '06

02 Nov '06

Our server is an CentOS4.4 box and we use the atrpms built RPMs for installing dovecot. I am wanting to use the sieve plug-in so I've followed the dovecot wiki instructions, downloaded the files from CVS, but I'm not sure what configure options to use. When I try without any options I get: dovecot-config not found from /usr/src/dovecot-sieve, use --with-dovecot=PATH to give path to compiled Dovecot sources I tried using "./configure --with-dovecot=/usr/libexec/dovecot" but get the same problem. Any help would be greatly appreciated. Gavin -- ATRPMS RPM file listing -- /etc/dovecot.conf /etc/pam.d/dovecot /etc/pki/dovecot/dovecot-openssl.cnf /etc/rc.d/init.d/dovecot /usr/lib64/dovecot/imap /usr/lib64/dovecot/imap/lib01_acl_plugin.so /usr/lib64/dovecot/imap/lib01_convert_plugin.so /usr/lib64/dovecot/imap/lib01_quota_plugin.so /usr/lib64/dovecot/imap/lib01_zlib_plugin.a /usr/lib64/dovecot/imap/lib01_zlib_plugin.la /usr/lib64/dovecot/imap/lib01_zlib_plugin.so /usr/lib64/dovecot/imap/lib02_imap_quota_plugin.a /usr/lib64/dovecot/imap/lib02_imap_quota_plugin.la /usr/lib64/dovecot/imap/lib02_imap_quota_plugin.so /usr/lib64/dovecot/imap/lib02_trash_plugin.so /usr/lib64/dovecot/lda /usr/lib64/dovecot/lda/lib01_acl_plugin.so /usr/lib64/dovecot/lda/lib01_convert_plugin.so /usr/lib64/dovecot/lda/lib01_quota_plugin.so /usr/lib64/dovecot/lda/lib02_trash_plugin.so /usr/lib64/dovecot/lib01_acl_plugin.a /usr/lib64/dovecot/lib01_acl_plugin.la /usr/lib64/dovecot/lib01_acl_plugin.so /usr/lib64/dovecot/lib01_convert_plugin.a /usr/lib64/dovecot/lib01_convert_plugin.la /usr/lib64/dovecot/lib01_convert_plugin.so /usr/lib64/dovecot/lib01_quota_plugin.a /usr/lib64/dovecot/lib01_quota_plugin.la /usr/lib64/dovecot/lib01_quota_plugin.so /usr/lib64/dovecot/lib02_trash_plugin.a /usr/lib64/dovecot/lib02_trash_plugin.la /usr/lib64/dovecot/lib02_trash_plugin.so /usr/lib64/dovecot/pop3 /usr/lib64/dovecot/pop3/lib01_convert_plugin.so /usr/lib64/dovecot/pop3/lib01_quota_plugin.so /usr/libexec/dovecot /usr/libexec/dovecot/checkpassword-reply /usr/libexec/dovecot/deliver /usr/libexec/dovecot/dict /usr/libexec/dovecot/dovecot-auth /usr/libexec/dovecot/gdbhelper /usr/libexec/dovecot/imap /usr/libexec/dovecot/imap-login /usr/libexec/dovecot/pop3 /usr/libexec/dovecot/pop3-login /usr/libexec/dovecot/rawlog /usr/libexec/dovecot/ssl-build-param /usr/sbin/dovecot /usr/sbin/dovecotpw /usr/share/doc/dovecot-1.0 /usr/share/doc/dovecot-1.0/REDHAT-FAQ.txt /usr/share/doc/dovecot-1.0/USE-WIKI-INSTEAD /usr/share/doc/dovecot-1.0/UW-to-Dovecot-Migration /usr/share/doc/dovecot-1.0/UW-to-Dovecot-Migration/maildir-migration.txt /usr/share/doc/dovecot-1.0/UW-to-Dovecot-Migration/migrate-folders /usr/share/doc/dovecot-1.0/UW-to-Dovecot-Migration/migrate-users /usr/share/doc/dovecot-1.0/UW-to-Dovecot-Migration/perfect_maildir.pl /usr/share/doc/dovecot-1.0/auth-protocol.txt /usr/share/doc/dovecot-1.0/auth.txt /usr/share/doc/dovecot-1.0/configuration.txt /usr/share/doc/dovecot-1.0/design.txt /usr/share/doc/dovecot-1.0/examples /usr/share/doc/dovecot-1.0/examples/dovecot-ldap.conf /usr/share/doc/dovecot-1.0/examples/dovecot-sql.conf /usr/share/doc/dovecot-1.0/examples/mkcert.sh /usr/share/doc/dovecot-1.0/index.txt /usr/share/doc/dovecot-1.0/mail-storages.txt /usr/share/doc/dovecot-1.0/multiaccess.txt /usr/share/doc/dovecot-1.0/nfs.txt /usr/share/doc/dovecot-1.0/securecoding.txt /usr/share/doc/dovecot-1.0/variables.txt /var/cache/dovecot /var/cache/dovecot/indexes /var/run/dovecot /var/run/dovecot/login

3 15

[Dovecot] making dovecot and exim write to one log
by Zbigniew Szalbot 02 Nov '06

02 Nov '06

Hello, I am looking for some advice. I am trying to force dovecot to run to the same log as exim does. In dovecot.conf I put the exim log path /var/log/exim/mainlog. I restarted dovecot and the process worked fine. However at midnight exim log file is rotated and since then dovecot stops logging to this log. In syslog.conf I put: mail.* /var/log/exim/mainlog And in newsyslog.conf I have: /var/log/exim/mainlog mailnull:mail 640 60 * @T00 Z I used to have an N flag next to Z but after reading the man I realized that its job is not to inform other processes about log creation. My qeustion is how do I set up things that dovecot and exim happily write to one log without having to restart dovecot at midnight? I am fairly new to FreeBSD which I use so I beg your patience with me. Thanks! -- Zbigniew Szalbot

2 1

Re: [Dovecot] deliver + quota failure
by Mark Ruijs 02 Nov '06

02 Nov '06

I investigated the deliver with quota's bug a little more (rc10, mysql, virtual domains, maildir). My log files reads: deliver(test(a)ruijs.cc): Info: msgid=<000f01c6fac1$bd4e8670$8801a8c0@Moskou>: save failed to INBOX deliver(test(a)ruijs.cc): Info: sieve runtime error: Keep: Generic Error deliver(test(a)ruijs.cc): Info: msgid=<000f01c6fac1$bd4e8670$8801a8c0@Moskou>: save failed to INBOX deliver(test(a)ruijs.cc): Error: open(ruijs.cc/test//.temp.in2sports2.vianetworks.nl.13210.72d247ac698d0019) failed: No such file or directory deliver(mark(a)ruijs.cc): Info: msgid=<dovecot-1162066721-407295-0(a)in2sports2.vianetworks.nl>: saved mail to Junk Dovecot tries to deliver, but notices quota exceeded. I don't think Sieve is playing a role here - I added Sieve before I encountered the problem. Two problems: 1) The .dovecot.lda-dupes can't be written (that's what the open...failed notice is about). 2) The Quota Exceed mail seem to contain mal-formed headers (that's why it the notice-mail ends in my junk-folder). Digging into deliver.c, I noticed that auth_client_put_user_env() changes the HOME environment from /var/mail (which is ok), to ruijs.cc/test/ (which is the maildir, relative to /var/mail). And then fopen fails (see the trace below). So I think that the code auth_socket = getenv("AUTH_SOCKET_PATH"); if (auth_socket == NULL) auth_socket = DEFAULT_AUTH_SOCKET_PATH; ret = auth_client_put_user_env(ioloop, auth_socket, destination, process_euid); if (ret != 0) return ret; home = getenv("HOME"); if (home != NULL) { /* If possible chdir to home directory so core file could be written. If it fails, don't worry. */ (void)chdir(home); is the key. Should the chdir be done *before* the call to auth_client_put_user_env()? I'm not familiar with the internal workings of the Dovecot LDA, so I won't suggest a proper fix. Who will. As for the mal-formed headers, I'll take a look at it later. Mark #0 i_error (format=0x80ac5f7 "open(%s) failed: %m") at failures.c:203 #1 0x0809f900 in dotlock_create (path=0x9ece2c0 "ruijs.cc/test//.dovecot.lda-dupes", dotlock=0x9edfc48, flags=Variable "flags" is not available. ) at file-dotlock.c:265 #2 0x0809fb71 in file_dotlock_open (set=0x80b9c90, path=0x9ece2c0 "ruijs.cc/test//.dovecot.lda-dupes", flags=0, dotlock_r=0x9ee7920) at file-dotlock.c:614 #3 0x08056ec5 in duplicate_new (path=0x9ece2c0 "ruijs.cc/test//.dovecot.lda-dupes") at duplicate.c:157 #4 0x080571c6 in duplicate_mark (id=0x9ece270, id_size=55, user=0xbf9edb45 "test(a)ruijs.cc", time=1162163205) at duplicate.c:195 #5 0x080573c9 in mail_send_rejection (mail=0x9ede7e0, recipient=0xbf9edb45 "test(a)ruijs.cc", reason=0x9edc218 "Quota exceeded") at mail-send.c:51 #6 0x08056c51 in main (argc=5, argv=0xbf9ec5d4) at deliver.c:595

3 4

[Dovecot] INBOX un-subscribable (is that a word?)
by Jim Horner 02 Nov '06

02 Nov '06

I am trying to get open-xchange installed and working (which after two days might be futile). In doing this I noticed that no email client can subscribe to INBOX. I'm using rc10 and my namespaces are the following. 99% of the email clients ignore the inability to subscribe to INBOX and display all the folders underneath anyway which is why I've never noticed this issue... however, open-xchange is not in that camp and only displays messages in INBOX. All folders are in the subscriptions file including INBOX but all email clients always list INBOX as not subscribed to. COMPANY are ROOTMAIL are share folders with ACLs in /etc/dovecot/acl and those top folders are not subscribable either. namespace public { separator = . prefix = COMPANY. location = maildir:/home/services/mail/arinbe.com/arinbe/Maildir:CONTROL=%h/shared-set… hidden = no inbox = no } namespace public { separator = . prefix = ROOTMAIL. location = maildir:/home/services/mail/arinbe.com/rootmail/Maildir:CONTROL=%h/shared-s… hidden = no inbox = no } # default namespace namespace private { separator = . inbox = yes hidden = no prefix = INBOX. }

2 1

[Dovecot] FC4 and Dovecot 1.0 not displaying all migrated mailboxes
by Lovell Mcilwain 02 Nov '06

02 Nov '06

Hello all, I recently switched to dovecot on my FC4 server from UW-IMAP on my Mac OS X 10.3 machine and I was able to get my inbox and my trash box to be seen without any issues but all of my other mailboxes don't seem to show up. My mail directory is ~/mail and that is where I placed all of my mailboxes that I moved from my mac, but when I log into my new server using SSL/IMAP, only my trash and my inbox show up. My other mailboxes don't show up at all. Can anyone tell me how I can get my other mailboxes to show? As far as I know these mailboxes are standard unix mailbox files. Thanks

2 1

[Dovecot] another suggestion
by Hans Morten Kind 02 Nov '06

02 Nov '06

On our solaris systems we quite often sees dovecot coredump on exit when trying to free a null buffer. After including if (array->buffer == NULL) return; in array_free() in array.h these coredums have been avoided. hmk

2 1

[Dovecot] BUG in RC10 deliver using mbox format
by Steven F Siirila 02 Nov '06

02 Nov '06

After recently adding the -f parameter to the call to the deliver command which is called by Postfix, I found that e-mail with a null return path (MAIL FROM:<>) was causing Dovecot deliver to SEGFAULT. I verified this by making this patch to deliver.c (notice I fixed a typo here, too): *** deliver.c.orig Fri Oct 13 07:32:28 2006 --- deliver.c Fri Oct 27 21:26:08 2006 *************** *** 446,454 **** i++; if (i == argc) { i_fatal_status(EX_USAGE, ! "Missing envleope argument"); } ! envelope_sender = argv[i]; } else { print_help(); i_fatal_status(EX_USAGE, --- 446,455 ---- i++; if (i == argc) { i_fatal_status(EX_USAGE, ! "Missing envelope argument"); } ! if (*argv[i]) ! envelope_sender = argv[i]; } else { print_help(); i_fatal_status(EX_USAGE, While this fixed my SEGFAULT, it still leaves the "From_" line with the default "dovecot.deliver" as the return path, something I don't want. It should be "MAILER-DAEMON" or some-such just like all the other LDAs in the case of a NULL return path. Perhaps there needs to be a new parameter so one can specify what a NULL return path should be converted to when it is encountered... Also, note that the "Usage" message in deliver.c does not include the relatively new -f option either, so that should have been part of my above patch as well. -- Steven F. Siirila Office: Lind Hall, Room 130B Internet Services E-mail: sfs(a)umn.edu Office of Information Technology Voice: (612) 626-0244 University of Minnesota Fax: (612) 626-7593

3 2

[Dovecot] quota with sendmail and dovecot
by Antonio Casado Rodríguez 02 Nov '06

02 Nov '06

I have a problem with dovecot and quotas I don't want quota in INBOX with sendmail (mbox), it's work ok. Sendmail can put the new messages in INBOX although exceed the quota limit. I have two namespace in dovecot: namespace private { separator = / inbox = yes prefix = "#mbox/" location = mbox:/Public/Maildir/%n_mbox_indexes:INBOX=/var/mail/%n } namespace private { separator = / prefix = "" location = maildir:/Public/Maildir/%n } I have this quota: plugin { quota = maildir:storage=10240 } It's work ok, i have 10 MB in INBOX and i have 10 MB in maildir. My clients are Mozilla Thunderbird My problem: when Sendmail put one new message in INBOX, Thunderbird see it, but the quota don't change. I think that when dovecot do a full sync it must update the quota.

2 1

[Dovecot] mbox_sync_read_and_move failure
by Timothy Daly 02 Nov '06

02 Nov '06

Hi, I recently switched to using dovecot for my IMAP server. I'm running dovecot 1.0rc10 on redhat linux 7.3. The filesystem is ext2, not NFS. I'm using mbox for mail storage. It worked okay for a day or two, but now when I try to check my mail I get an error from evolution, my imap client, saying that the server unexpectedly disconnected. In the server logs I see: Nov 2 13:10:49 tenkan dovecot: imap-login: Login: user=<tim>, method=PLAIN, rip=192.132.92.15, lip=216.114.78.229, TLS Nov 2 13:10:58 tenkan dovecot: IMAP(tim): file mbox-sync-rewrite.c: line 405 (mbox_sync_read_and_move): assertion failed: (need_space == (uoff_t)-mails[idx].space) Nov 2 13:10:58 tenkan dovecot: child 30315 (imap) killed with signal 6 I see that this came up on this list a little while ago, but it doesn't sound like it got resolved. For the moment, I'm unable to read my mail via IMAP. :/ Any ideas? Cheers, Tim ____________________________________________________________________________________ Access over 1 million songs - Yahoo! Music Unlimited (http://music.yahoo.com/unlimited)

1 1

[Dovecot] Dovecot-auth stand alone
by Jorgen Lundman 02 Nov '06

02 Nov '06

Since you have to have a SASL implementation with Postfix, either Cyrus or Dovecot, would it be feasable to have autoconf options to build only those parts required? Currently I attempt to disable most things, except for LDAP which we want to use: ./configure --with-ldap --without-pop3d --without-passwd --without-passwd-file --without-shadow --without-pam --without-checkpassword --without-bsdauth --without-vpopmail --without-ssl --without-deliver --without-sql-drivers --with-storages= That still compiles, and installs, imap. No way to stop that. However, master process "dovecot" does not want to start with "protocols=" set to empty. This is somewhat understandable, but I really do not want any listening ports, just the Unix auth socket and dovecot-auth process. Bind localhost for now? I take it I should run dovecot-auth as stand-alone, setting the AUTH_1 environment variable as well as a few others. Lund -- Jorgen Lundman | <lundman(a)lundman.net> Unix Administrator | +81 (0)3 -5456-2687 ext 1017 (work) Shibuya-ku, Tokyo | +81 (0)90-5578-8500 (cell) Japan | +81 (0)3 -3375-1767 (home)

3 5

[Dovecot] 1.0.rc10 status report
by David Lee 02 Nov '06

02 Nov '06

(Background: Relatively new to dovecot; looking to do transparent replacement of long-established UW-IMAP on cluster of Linux boxes which NFS-mount a shared "/var/spool/mail".) With rc8, where I had already increased "login_max_processes_count" from default 128 to 1024, we had still hit the issue of too many logins crashing dovecot, so that trial had only lasted a couple of hours. With rc10, I doubled this to try to avoid the problem (I didn't want to risk testing the new code that addressed the problem... sorry!). We ran for almost a full working day. Good! Because of a few issues (below) I then backed off. 1. "User unknown": We use NIS for our passwd information. On the earlier rc8 test we had had several occurences of "User unknown" (from "deliver") giving "dsn=5..." for perfectly valid users. So for this rc10 test I applied a local patch so these were reduced to "EX_TEMPFAIL" (dsn=4...). (This was triggered, as epected, a few times and subsequent delivery attemtps succeeded.) I strongly suspect that this is some sort of issue with FC5, probably "nscd" and nothing to do with dovecot. Hints would be nice, but from the dovecot perspective you may probably ignore this item. 2. For one particular user, the "deliver" consistently gave: Failed to create storage for '...' with mail 'mbox:/HOME_DIRECTORY_USED_BUT_NOT_GIVEN_BY_USERDB:INBOX=... I think this is ultimately due to something strange in the user ".forward" file. I'd be delighted to follow this up with anyone else who might have seen it. Although in one sense we may be drifting off-topic, in another sense I suspect that there is scope for adjusting "deliver" to handle this more gracefully. 3. There were several occurences of: IMAP(...): file ../../../../../src/lib-storage/index/mbox/mbox-sync-rewrite.c: line 405 (mbox_sync_read_and_move): assertion failed: (need_space == (uoff_t)-mails[idx].space) child 30842 (imap) killed with signal 6 This looks particularly awkward. Any thoughts? 4. There were two occurences of: IMAP(...): file ../../../src/lib-index/mail-index.c: line 1801 (mail_index_move_to_memory): assertion failed: (index->fd == -1) child 20493 (imap) killed with signal 6 Again, this looks particularly awkward. Any thoughts? For these last two items, note that the indexes are currently NFS-shared alongside the INBOX area. I'm still not clear on how to regard the concept of indexes, as applied to a small cluster of machines, and handling simultaneous updates to INBOXes (analogous to the vital importance of INBOX locking for such updates). If one imagines the IMAP daemon (and pop and deliver) as file-clients of the (NFS-shared) INBOXes on a fileserver, do the indexes belong very close to the INBOXes (fileserver) or the dovecot software (file client)? So should I have the indexes on the fileserver (one instance), or should they be on each cluster machine's private storage (possibly several instances; one per cluster machine)? I've got them on the server; would they be better on the cluster clients? (Might that be the cause and fix of these two problems?) -- : David Lee I.T. Service : : Senior Systems Programmer Computer Centre : : Durham University : : http://www.dur.ac.uk/t.d.lee/ South Road : : Durham DH1 3LE : : Phone: +44 191 334 2752 U.K. :

3 2

[Dovecot] deliver + quota failure
by Mark Ruijs 02 Nov '06

02 Nov '06

I use Dovecot's deliver as the LDA for Postfix in a virtual user setting. My maillog reads: Oct 22 00:17:51 mail dovecot: auth(default): master in: USER 1 mark.ruys(a)in2sports.net service=deliver Oct 22 00:17:51 mail dovecot: auth-worker(default): sql(mark.ruys(a)in2sports.net): SELECT maildir AS home, 5000 AS uid, 5000 AS gid, CONCAT('dirsize:storage=', round(quota/1000)) AS quota FROM mailbox WHERE username = 'mark.ruys(a)in2sports.net' AND active = 1 Oct 22 00:17:51 mail dovecot: auth(default): master out: USER 1 mark.ruys(a)in2sports.net home=in2sports.net/mark.ruys/ uid=5000 gid=5000 quota=dirsize:storage=10240 Oct 22 00:17:51 mail deliver(mark.ruys(a)in2sports.net): msgid=<00c801c6f55e$af416fb0$8801a8c0@Moskou>: save failed to INBOX Oct 22 00:17:51 mail deliver(mark.ruys(a)in2sports.net): open(in2sports.net/mark.ruys//.temp.mail.in2sports.net.12777.5c70c02bb158bd1 a) failed: No such file or directory The reason is, I'm out of quota. I expected some kind of bounce, but the message is killed by Amavis because of a bad header: Content-Type: text/plain; charset=utf-8 Content-Disposition: inline Content-Transfer-Encoding: 8bit Your message was automatically rejected by Dovecot Mail Delivery Agent. The following reason was given: Quota exceeded --12684/mail.in2sports.net Content-Type: message/disposition-notification Reporting-UA: mail.in2sports.net; Dovecot Mail Delivery Agent Final-Recipient: rfc822; mark.ruys(a)in2sports.net The problem is, there is no recipient (header is missing). Anyone a clue how to fix it? Thanks for some directions. Mark Ruys Config: - Dovecot rc 10 - postfix-2.3.3-2.mysql.sasl2.vda.fc4 dovecot.conf: protocol imap { mail_plugins = quota imap_quota } protocol lda { postmaster_address = postmaster(a)in2sports.net mail_plugins = quota auth_socket_path = /var/run/dovecot/auth-master } postfix/main.cf: dovecot_destination_recipient_limit = 1 virtual_transport = dovecot virtual_create_maildirsize = yes virtual_mailbox_limit_maps = mysql:/etc/postfix/mysql/limits.cfg virtual_mailbox_limit_override = yes virtual_overquota_bounce = yes

2 1

[Dovecot] valid_chroot_dirs question
by Luca Corti 02 Nov '06

02 Nov '06

Hello, I've got a dovecot setup using PAM and real system users. In this setup I also use pure-ftpd to give local users ftp access to their $HOMEs. To have pure-ftpd chroot into the user home i replaced /home/user with /home/user/./ in /etc/passwd. Unfortunately this breaks Dovecot this way: Oct 23 18:18:20 localhost dovecot: Invalid chroot directory '/home/foo' (user foo) (see valid_chroot_dirs in config file) and dovecot.conf says # ':' separated list of directories under which chrooting is allowed for mail # processes (ie. /var/mail will allow chrooting to /var/mail/foo/bar too). # This setting doesn't affect login_chroot or auth_chroot variables. # WARNING: Never add directories here which local users can modify, that # may lead to root exploit. Usually this should be done only if you don't # allow shell access for users. See doc/configuration.txt for more information. #valid_chroot_dirs = Now if I set valid_chroot_dirs = /home everything works, but the WARNING pretty much scares me since user foo HAS shell access. Is this safe? Is there a way to avoid this? Why I can't chroot to /home/foo/./ if I can to /home/foo ? I'm on 1.0rc10 thanks

2 1

[Dovecot] Dovecot imap bug
by Lauri Jesmin 02 Nov '06

02 Nov '06

Hello, i got such error from dovecot RC10, Oct 24 10:38:58 raud dovecot: [ID 107833 mail.info] imap-login: Login: user=<eleppik>, method=PLAIN, rip=xxx, lip=yyy Oct 24 10:39:03 raud dovecot: [ID 107833 mail.error] IMAP(eleppik): file mbox-sync-rewrite.c: line 405 (mbox_sync_read_and_move): assertion failed: (need_space == (uoff_t)-mails[idx].space) This is Solaris on x86, 32 bit executable, compiled with gcc, and there is enough room for index creation. -- Lauri Jesmin <lauri.jesmin(a)ut.ee> Tartu Ülikool

2 1

[Dovecot] Installation of Dovecot
by Steven F Siirila 02 Nov '06

02 Nov '06

When I configure Dovecot to conform to our directory hierarchy, it insists on adding 'dovecot/' to the prefixes I specify. Is there any way to inhibit this? My configure command is: ./configure --prefix=/opt/dovecot --sysconfdir=/etc/opt/dovecot \ --libexecdir=/opt/dovecot/libexec --localstatedir=/var/opt/dovecot \ --without-sql-drivers --with-ssl=openssl \ --with-ssldir=/etc/opt/dovecot My problem is with the resulting directories: /opt/dovecot/libexec/dovecot is used instead of /opt/dovecot/libexec /var/opt/dovecot/lib/dovecot is used instead of /var/opt/dovecot/lib /var/opt/dovecot/run/dovecot is used instead of /var/opt/dovecot/run It seems that Dovecot assumes that libexecdir and localstatedir refer to non-Dovecot-specific directories, and adds 'dovecot/' to the path. Is there any way to avoid this? In our environment )we use: /opt/XXX Optional software XXX /etc/opt/XXX Configuration for optional software XXX /var/opt/XXX Variable data for optional software XXX (Which makes for easier upgrades) -- Steven F. Siirila Office: Lind Hall, Room 130B Internet Services E-mail: sfs(a)umn.edu Office of Information Technology Voice: (612) 626-0244 University of Minnesota Fax: (612) 626-7593

2 1

[Dovecot] Maildir++?
by Marten Lehmann 02 Nov '06

02 Nov '06

Hello just to have up2date records: Is the current dovecot release capable of the maildirsizefile as described in http://www.exim.org/exim-html-4.63/doc/html/spec_html/ch26.html#id2643923 ? Regards Marten

2 1

[Dovecot] Fw: POP 23 problem
by Manoj Fernandez 02 Nov '06

02 Nov '06

Hi there I am using Dovecot on Ubuntu 6 LTS forPOP3 services. The user account created at installation works fine and Iam able to log to POP3 services by telnetr. When I created a another user and tried tologin via telnet this is what happens telnet XXX.XXX.XXX.XXX 10 + OK Dovecot ready user XXXX + OK pass XXX +OK logged in Connection tohost lost and session terminates. Pls advise what could be the problem Tks Manoj Sri Lanka

2 1