- dovecot - dovecot.org

UID Purge?
by Kevin 28 Mar '17

28 Mar '17

Hi, I've just migrated to Dovecot from cyrus-imapd, and I notice that when I move emails from one folder to another they appear to be automatically marked deleted (expected) and also purged (not expected). With cyrus, I am used to emails being marked deleted, but still existing until a manual purge (expunge). Is this normal behaviour with Dovecot, and is it configurable? Thanks. Kevin.

2 1

replicator crashing - oom
by Daniel Miller 24 Mar '17

24 Mar '17

I have the following in my log: Mar 21 14:46:59 bubba dovecot: replicator: Panic: data stack: Out of memory when allocating 1073741864 bytes Mar 21 14:46:59 bubba dovecot: replicator: Error: Raw backtrace: /usr/local/lib/dovecot/libdovecot.so.0(+0x97c90) [0x7f4638a7cc90] -> /usr/local/lib/dovecot/libdovecot.so.0(+0x97d6e) [0x7f4638a7cd6e] -> /usr/local/lib/dovecot/libdovecot.so.0(i_fatal+0) [0x7f4638a14322] -> /usr/local/lib/dovecot/libdovecot.so.0(+0x95e3f) [0x7f4638a7ae3f] -> /usr/local/lib/dovecot/libdovecot.so.0(+0x9608b) [0x7f4638a7b08b] -> /usr/local/lib/dovecot/libdovecot.so.0(+0xb15f8) [0x7f4638a965f8] -> /usr/local/lib/dovecot/libdovecot.so.0(+0x93c42) [0x7f4638a78c42] -> /usr/local/lib/dovecot/libdovecot.so.0(buffer_write+0x74) [0x7f4638a78fb4] -> dovecot/replicator(replicator_queue_push+0x13b) [0x40519b] -> dovecot/replicator() [0x4049c2] -> dovecot/replicator() [0x4040a8] -> dovecot/replicator() [0x404275] -> /usr/local/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x52) [0x7f4638a907d2] -> /usr/local/lib/dovecot/libdovecot.so.0(io_loop_handler_run_internal+0xe7) [0x7f4638a91d17] -> /usr/local/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x3c) [0x7f4638a9086c] -> /usr/local/lib/dovecot/libdovecot.so.0(io_loop_run+0x38) [0x7f4638a90a28] -> /usr/local/lib/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f4638a1dfc3] -> dovecot/replicator(main+0x17a) [0x40342a] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf5) [0x7f4638640ec5] -> dovecot/replicator() [0x4034c5] Mar 21 14:47:00 bubba dovecot: replicator: Fatal: master: service(replicator): child 15650 killed with signal 6 (core dumped) -- Daniel

4 7

One way dsync replication with dsync -R
by Wolfgang Hennerbichler 24 Mar '17

24 Mar '17

Hi dovecot users, I’ve found the -R parameter for dsync. Does this enable one-way syncing if enabled on the slave in replication_dsync_parameters? The documentation doesn’t mention much what happens if I enable this on the “replciation slave”. Before you ask: Two way synchronisation causes issues in my installation (see the unanswered thread here: http://www.dovecot.org/list/dovecot/2017-March/107431.html) it causes unread, deleted messages to re-appear. I would hope that one-way synchronisation would avoid this, but I’d also like to know if the -R parameter is safe to use. I am also still wondering if anybody has a perfectly working 2-way-synchronised dovecot installation (and I’m interested in your dovecot -n). wogri

2 5

FTS on shared/virtual folders
by Daniel Miller 24 Mar '17

24 Mar '17

A question on how FTS is implemented with regards to shared & virtual mailbox. In particular - with Solr. Does Dovecot treat each shared and virtual mailbox as completely independent - which means Solr would reindex each appearance independently? If that's the case, has any thought been given to potentially identifying such queries and passing them to Solr against the "native" or private mailboxes that are referenced? -- Daniel

1 0

"Connection queue full" error
by Mark Moseley 23 Mar '17

23 Mar '17

Just a quickie: why is "Connection queue full" logged under Info, instead of something like error? Or at least have the word 'error' in it? Seems like a pretty error-ish thing to happen. Anything that causes the connection to fail from the server side should show up in a grep -i for error. I.e. I don't care about clients failing to match up SSL cipher suites; that's fine as Info (SSL errors ironically do have 'error' in them, though I assume that's coming from the ssl libs). But the server dropping connections due to running out of available daemons (and any other "server isn't working right" conditions) is definitely worthy of Error.

1 0

dsync with namespaces
by Tom Sommer 23 Mar '17

23 Mar '17

I have a major dsync headache which I am hoping someone can help me with. I have to migrate mails from a 'namespace/inbox/prefix=INBOX.' server to a 'namespace/inbox/prefix=' server. So I'm trying # dsync -o 'namespace/inbox/prefix=' sync -1 -f -u xx(a)xx.com tcp:1.2.3.4 It works fine for some accounts, however for others many hundreds and sometimes thousands of mails go missing from the destination inbox, and a resync doesn't pick them up. The debug output doesn't recognize these either. If I remove the 'namespace/inbox/prefix=' part, then I get 'Error: Couldn't find namespace for mailbox X' errors. Both source and destination is running 2.2.27 I can't imapsync :S Thanks. -- Tom

1 0

Re: Can't verify remote server certs without trusted CAs (ssl_client_ca_* settings)
by Ralf Hildebrandt 23 Mar '17

23 Mar '17

* Aki Tuomi <aki.tuomi(a)dovecot.fi>: > Could you send us the gdb bt full backtrace for the core file? Currently I can't get it to create coredumps doveconf -n: # 2.2.devel (3f97702): /etc/dovecot/dovecot.conf # Pigeonhole version 0.4.devel (023f391) # OS: Linux 4.4.0-65-generic x86_64 Ubuntu 16.04.2 LTS auth_mechanisms = plain login default_vsz_limit = 1 G imapc_host = exchange-imap.charite.de imapc_port = 993 imapc_ssl = imaps imapc_ssl_verify = no listen = *,:: mail_gid = imapproxy mail_home = /home/imapproxy/%u mail_location = imapc:~/imapc mail_plugins = mail_log notify mail_uid = imapproxy passdb { args = host=exchange-imap.charite.de port=993 ssl=imaps default_fields = userdb_imapc_user=%u userdb_imapc_password=%w userdb_imapc_host=exchange-imap.charite.de userdb_imapc_ssl=imaps userdb_imapc_port=993 driver = imap } plugin { sieve = file:~/sieve;active=~/.dovecot.sieve } protocols = imap service auth { inet_listener { address = 127.0.0.1 port = 12345 } } ssl = required ssl_ca = </etc/ssl/certs/ca-certificates.crt ssl_cert = </etc/dovecot/dovecot.pem ssl_cipher_list = EECDH+ECDSA+AESGCM:EECDH+aRSA+AESGCM:EECDH+ECDSA+SHA384:EECDH+ECDSA+SHA256:EECDH+aRSA+SHA384:EECDH+aRSA+SHA256:EECDH+aRSA+RC4:EECDH:EDH+aRSA:!aNULL:!eNULL:!LOW:!3DES:!MD5:!EXP:!PSK:!SRP:!DSS:!RC4 ssl_client_ca_file = /etc/ssl/certs/ca-certificates.crt ssl_key = # hidden, use -P to show it ssl_prefer_server_ciphers = yes ssl_protocols = !SSLv2 !SSLv3 userdb { driver = prefetch } verbose_proctitle = yes Ralf Hildebrandt Geschäftsbereich IT | Abteilung Netzwerk Charité - Universitätsmedizin Berlin Campus Benjamin Franklin Hindenburgdamm 30 | D-12203 Berlin Tel. +49 30 450 570 155 | Fax: +49 30 450 570 962 ralf.hildebrandt(a)charite.de | http://www.charite.de

3 4

Ubuntu Dovecot 2.2.9 several Errors, Transaction log as well as BUG message
by Kein Name 23 Mar '17

23 Mar '17

Hello List, I am running an Ubuntu 14.04.5 LTS Server with Dovecot 2.2.9, only local filesystems and authentication done via mysql backend. Server is a Strato Virtual Server running 2.6.32-042stab120.11 #1 SMP Fri Mar 10 16:52:50 MSK 2017 i686 i686 i686 GNU/Linux Sometimes I see errors in the log like this for one user: Error: Transaction log /var/vmail/ example.net/jena/Maildir/.Archives.2017/dovecot.index.log: duplicate transaction log sequence (2) After seeing these, some time later, (mostly 2h), Dovecot starts to deny login from all clients with messages like this: Mar 23 01:32:27 h2312250 dovecot: auth: Error: BUG: Authentication client sent unknown handshake command: REQUEST?1804861441?19318?1?9ce500129289a0237e4e85a6c880a047?session_pid=19323... Mar 23 01:32:27 h2312250 dovecot: imap: Error: Authentication server didn't send valid SPID as expected: MECH#011PLAIN#011plaintext Mar 23 01:32:27 h2312250 dovecot: imap: Error: Disconnected from auth server, aborting (client-pid=19318 client-id=1) Mar 23 01:32:27 h2312250 dovecot: imap-login: Internal login failure (pid=19318 id=1) (internal failure, 1 successful auths): user=< user(a)example.net>, method=PLAIN, rip=X, lip=X, mpid=19323, session=<G9f4AltL4ABRqZ4X> I do not know if these problems have something to do with each other or not. But it happened several times now (maybe once or twice every month or so). When I restart Dovecot, the error seems gone for the moment, until it comes back in a month or some weeks. For reference, here is the running config: dovecot.conf # 2.2.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-042stab120.11 i686 Ubuntu 14.04.5 LTS auth_mechanisms = plain login auth_verbose = yes disable_plaintext_auth = no log_timestamp = "%Y-%m-%d %H:%M:%S " managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave passdb { args = /etc/dovecot/dovecot-mysql.conf driver = sql } plugin { quota = maildir:User quota quota_rule = *:bytes=10M sieve = ~/dovecot.sieve } protocols = imap pop3 sieve service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-master { mode = 0600 user = vmail } user = root } ssl_cert = </etc/postfix/sslcert/mailserver.crt ssl_key = </etc/postfix/sslcert/mailserver.key userdb { args = /etc/dovecot/dovecot-mysql.conf driver = sql } protocol pop3 { mail_plugins = quota pop3_uidl_format = %08Xu%08Xv } protocol imap { mail_plugins = quota imap_quota } protocol lda { auth_socket_path = /var/run/dovecot/auth-master mail_plugins = sieve quota postmaster_address = postmaster(a)example.net quota_full_tempfail = yes } dovecot-mysql.conf driver = mysql connect = host=localhost dbname=mail user=user password=XXX default_pass_scheme = CRYPT password_query = SELECT password FROM users WHERE email = '%u' user_query = SELECT CONCAT('/var/vmail/',SUBSTRING_INDEX(email,'@',-1),'/',SUBSTRING_INDEX(email,'@',1),'/') AS home, CONCAT('maildir:/var/vmail/',SUBSTRING_INDEX(email,'@',-1),'/',SUBSTRING_INDEX(email,'@',1),'/Maildir/') AS mail, 5000 AS uid, 5000 AS gid, concat('*:bytes=', quota) AS quota_rule FROM users WHERE email = '%u' Any help is appreciated. Thanks Stefan Koenig

2 2

dovecot configuration oops
by Liam Parker 23 Mar '17

23 Mar '17

Hi, I've just transitioned from using courier to dovecot. Thanks for making this possible. During the 'quite simple' transition process, I didn't do much prep as I'm in more of a more of a fix-compile-fix-compile mode rather than a 'read all the docs first' so you may just want to give up now :) If you are still with me, I just wanted to say, it wasn't completely obvious that I needed a password and a user database [PAM not virtual]. Maybe that's just me but anyway, I spent longer than I should have trying to get PAM to work before eventually realising 'internal error check server logs' meant 'where's your user database'. I guess I assumed PAM could cover it all. If you are in to that kind of thing (usability), it might be sensible to have some kind of "basic errors" check during the config file parse phase which picks up stuff like this and points out a more specific error. I did check the logs vigorously and I even turn on every kind of debug_ (to the extent I started getting plain text passwords in the log!) but the 'internal server error check logs' was actually the only log entry for this issue. In case the point is still unclear, I would have spent less time running in the wrong direction if the error message had been "At least one user database must be configured" or some such. I completely understand if your philosophy is "read the manual or suffer the consequences" and it wasn't a complete fail but a simple up front config check could have helped. Thanks for your time today, Kind Regards, Liam

2 1

Understanding quotas
by Robert Moskowitz 22 Mar '17

22 Mar '17

Just to level-set, I am using Centos7-arm which supplies Dovecot 2.2.10. I don't have access to a arm build or mock environment and use what is available (I DID try to install them but had dependency issues). Much of what I have is from campworld, but some I have picked up from other Centos mailserver builders. Also I am using Postfixadmin which provides quotas per user in mysql database. To access those quotas for dovecot, I have the following script: cat <<EOF>/etc/dovecot/dovecot-dict-quota.conf || exit 1 connect = host=localhost dbname=postfix user=postfix password=$Postfix_Database_Password map { pattern = priv/quota/storage table = quota2 username_field = username value_field = bytes } map { pattern = priv/quota/messages table = quota2 username_field = username value_field = messages } EOF Where $Postfix_Database_Password is an env variable in my install howto. I am setting up quota plugins as follows: sed -i "/#mail_plugins/ a mail_plugins = quota sieve" /etc/dovecot/conf.d/15-lda.conf sed -i "/#mail_plugins / a mail_plugins = quota imap_quota trash" /etc/dovecot/conf.d/20-imap.conf sed -i "/#mail_plugins/ a mail_plugins = quota" /etc/dovecot/conf.d/20-pop3.conf But I am having 'challenges' with how to actually enable quotas and understanding 90-quota.conf. I am starting from campworld's 'reduced' dovecot.conf seeing: dict { quotadict = mysql:/etc/dovecot/dovecot-dict-quota.conf } and plugin { quota = dict:user::proxy::quotadict acl = vfile:/etc/dovecot/acls trash = /etc/dovecot/trash.conf sieve_global_path = /home/sieve/globalfilter.sieve sieve = ~/dovecot.sieve sieve_dir = ~/sieve sieve_global_dir = /home/sieve/ #sieve_extensions = +notify +imapflags sieve_max_script_size = 1M } I have put the sieve plugin lines into the 90-sieve.conf and the acl into 10-acl.conf. Trash is a separate matter for a later question... So I am looking for guidance as to how to integrate the Postfixadmin quota information properly into 90-quota.conf thank you

2 3

Re: replicator crashing - oom
by Daniel Miller 22 Mar '17

22 Mar '17

Think I got it: #0 0x00007fddaf597c37 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56 #1 0x00007fddaf59b028 in __GI_abort () at abort.c:89 #2 0x00007fddaf9c0c86 in default_fatal_finish (type=<optimized out>, status=status@entry=0) at failures.c:201 #3 0x00007fddaf9c0d6e in i_internal_fatal_handler (ctx=0x7fff7197d000, format=<optimized out>, args=<optimized out>) at failures.c:670 #4 0x00007fddaf958322 in i_panic (format=format@entry=0x7fddafa047b8 "data stack: Out of memory when allocating %lu bytes") at failures.c:275 #5 0x00007fddaf9bee3f in mem_block_alloc (min_size=536870912) at data-stack.c:341 #6 0x00007fddaf9bf08b in t_malloc_real (size=size@entry=536870912, permanent=permanent@entry=true) at data-stack.c:396 #7 0x00007fddaf9bf0ca in t_malloc (size=size@entry=536870912) at data-stack.c:442 #8 0x00007fddaf9da5f8 in pool_data_stack_realloc (pool=<optimized out>, mem=0x7fdd99f59038, old_size=268435449, new_size=536870912) at mempool-datastack.c:126 #9 0x00007fddaf9bcc42 in p_realloc (new_size=<optimized out>, old_size=<optimized out>, mem=<optimized out>, pool=<optimized out>) at mempool.h:88 #10 buffer_alloc (buf=buf@entry=0xf849a8, size=536870912) at buffer.c:36 #11 0x00007fddaf9bcfb4 in buffer_check_limits (data_size=32, pos=268435424, buf=0xf849a8) at buffer.c:75 #12 buffer_write (_buf=0xf849a8, pos=268435424, data=0xfa0420, data_size=32) at buffer.c:187 #13 0x000000000040519b in array_append_i (count=1, data=0xfa0420, array=<synthetic pointer>) at ../../../src/lib/array.h:168 #14 replicator_queue_handle_sync_lookups (user=0xfa3fc0, queue=0xf92260) at replicator-queue.c:278 ---Type <return> to continue, or q <return> to quit--- #15 replicator_queue_push (queue=0xf92260, user=0xfa3fc0) at replicator-queue.c:296 #16 0x00000000004049c2 in dsync_callback (reply=DSYNC_REPLY_OK, state=0xf84590 "AQAAAHX+sC3O3gNSjAoAAOEwx0RQoclMAwAAAAQ", 'A' <repeats 20 times>, "DAAAAEu2cNfSIZk0oMgAAO8QcX0yhyUwDAAAAlg", 'A' <repeats 20 times>, "IAAADFjqMEUPIEU+IlAACdtazLUaHJTAcAAAAI", 'A' <repeats 20 times>, "BwAAAEfYPTqXct9VYRMAAJ21"..., context=0xfa1560) at replicator-brain.c:121 #17 0x00000000004040a8 in dsync_callback (client=0xfa14a0, state=<optimized out>, reply=DSYNC_REPLY_OK) at dsync-client.c:65 #18 0x0000000000404275 in dsync_input_line (line=0xf84988 "+", client=0xfa14a0) at dsync-client.c:132 #19 dsync_input (client=0xfa14a0) at dsync-client.c:153 #20 0x00007fddaf9d47d2 in io_loop_call_io (io=0xfa15a0) at ioloop.c:599 #21 0x00007fddaf9d5d17 in io_loop_handler_run_internal (ioloop=ioloop@entry=0xf8c720) at ioloop-epoll.c:223 #22 0x00007fddaf9d486c in io_loop_handler_run (ioloop=ioloop@entry=0xf8c720) at ioloop.c:648 #23 0x00007fddaf9d4a28 in io_loop_run (ioloop=0xf8c720) at ioloop.c:623 #24 0x00007fddaf961fc3 in master_service_run (service=0xf8c5c0, callback=callback@entry=0x404720 <client_connected>) at master-service.c:641 #25 0x000000000040342a in main (argc=1, argv=0xf8c390) at replicator.c:112 Daniel On 3/22/2017 9:11 AM, Daniel Miller wrote: > Where would I find the core file? I'm not finding anything obvious. > > The replicator path is /usr/local/libexec/dovecot/replicator > > Daniel > > On 3/22/2017 12:52 AM, Aki Tuomi wrote: >> Can you provide us gdb bt full dump? >> >> gdb /usr/libexec/dovecot/replicator /path/to/core >> >> on some systems, it's /usr/lib/dovecot/replicator >> >> Aki >> >> On 21.03.2017 23:48, Daniel Miller wrote: >>> I have the following in my log: >>> >>> Mar 21 14:46:59 bubba dovecot: replicator: Panic: data stack: Out of >>> memory when allocating 1073741864 bytes >>> Mar 21 14:46:59 bubba dovecot: replicator: Error: Raw backtrace: >>> /usr/local/lib/dovecot/libdovecot.so.0(+0x97c90) [0x7f4638a7cc90] -> >>> /usr/local/lib/dovecot/libdovecot.so.0(+0x97d6e) [0x7f4638a7cd6e] -> >>> /usr/local/lib/dovecot/libdovecot.so.0(i_fatal+0) [0x7f4638a14322] -> >>> /usr/local/lib/dovecot/libdovecot.so.0(+0x95e3f) [0x7f4638a7ae3f] -> >>> /usr/local/lib/dovecot/libdovecot.so.0(+0x9608b) [0x7f4638a7b08b] -> >>> /usr/local/lib/dovecot/libdovecot.so.0(+0xb15f8) [0x7f4638a965f8] -> >>> /usr/local/lib/dovecot/libdovecot.so.0(+0x93c42) [0x7f4638a78c42] -> >>> /usr/local/lib/dovecot/libdovecot.so.0(buffer_write+0x74) >>> [0x7f4638a78fb4] -> dovecot/replicator(replicator_queue_push+0x13b) >>> [0x40519b] -> dovecot/replicator() [0x4049c2] -> dovecot/replicator() >>> [0x4040a8] -> dovecot/replicator() [0x404275] -> >>> /usr/local/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x52) >>> [0x7f4638a907d2] -> >>> /usr/local/lib/dovecot/libdovecot.so.0(io_loop_handler_run_internal+0xe7) >>> >>> [0x7f4638a91d17] -> >>> /usr/local/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x3c) >>> [0x7f4638a9086c] -> >>> /usr/local/lib/dovecot/libdovecot.so.0(io_loop_run+0x38) >>> [0x7f4638a90a28] -> >>> /usr/local/lib/dovecot/libdovecot.so.0(master_service_run+0x13) >>> [0x7f4638a1dfc3] -> dovecot/replicator(main+0x17a) [0x40342a] -> >>> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf5) >>> [0x7f4638640ec5] -> dovecot/replicator() [0x4034c5] >>> Mar 21 14:47:00 bubba dovecot: replicator: Fatal: master: >>> service(replicator): child 15650 killed with signal 6 (core dumped) >>>

1 0

Permission denied when logrotating dovecot.log
by Michael Heuberger 22 Mar '17

22 Mar '17

Hello guys Having headaches here how to make logrotation for dovecot log files work. Having permission issues: michael.heuberger@xxx /e/l/daily ❯❯❯ sudo logrotate -fv dovecot.daily ⏎ reading config file dovecot.daily Handling 1 logs rotating pattern: /var/log/dovecot*.log forced from command line (10 rotations) empty log files are rotated, old logs are removed considering log /var/log/dovecot.log error: skipping "/var/log/dovecot.log" because parent directory has insecure permissions (It's world writable or writable by group which is not "root") Set "su" directive in config file to tell logrotate which user/group should be used for rotation. This is my current logrotation conf for dovecot: /var/log/dovecot*.log { rotate 10 missingok sharedscripts postrotate doveadm log reopen endscript } And the /var/log folder has these permissions: drwxrwxr-x 12 root syslog 4.0K Mar 19 12:43 log Any clues what's wrong? Thanks Michael -- Binary Kitchen Michael Heuberger 1/33 Parrish Road Sandringham Auckland 1025 (New Zealand) Mobile (text only) ... +64 21 261 89 81 Email ................ michael(a)binarykitchen.com Website .............. http://www.binarykitchen.com

5 9

SIS and mailbox restore
by Jean-Luc Oms 22 Mar '17

22 Mar '17

Still on the problem with dovecot 2.2.27 .... I use the single instance storage, and mdbox format. I use 2 zfs file systems, one for mailboxes, the other for attachements. I use znapzend to generate many zfs snapshots for backup purpose (inode numbers are preserved but it is unusefull). When I try to restore a deleted/purged mailbox with doveadm import I get the error of the first attachement missing in the SIS and the process stops. Option 1: the python script is working but it's really too long. * I restore all the SIS missing files since the snapshot date, preserving hard link count; * I restore the mailbox * I purge all the mailbox to delete the large number of unnecessery files restored Option 2: looking in the list archive I see that doveadm dump can guive me the msg.ext-ref that was missing to my knowledge. I try this use of doveadm dump: doveadm dump /MySnapShot/vmail/user/mdbox/storage/m.* Is this correct to get all the information I need ? I have to write a script to get msg.ext-ref for a particular msf.guid, or a specific mailbox Is there a way with doveadm dump to extract this type of information for a particular mailbox ? Thanks for your support. -- __________________________________________ Jean-Luc Oms STI-RéseauX - LIRMM - CNRS/UM2 161 rue Ada - BAT 4 - CC 477 34095 Montpellier cedex 5 Tel +33 4 67 41 85 93 Urg +33 6 32 01 04 17 __________________________________________

1 0

[Sieve] Is the way to run external script to get attachment?
by Konstantin Shalygin 22 Mar '17

22 Mar '17

Hello. Read all about Extprograms, but have a question. Use case: Every day we have couple messages with attachment (from one sender, this is one-way communication). This attachment is uploads to ownCloud. By hand... need some automation. As I see, pipe cat execute scripts with text data USER/FROM/SUBJECT - and I think with variables it can be any text data, how about attachment? How I see this: script executes and as arg receives from sieve attachment file, or message file and we can parse it for attachment. When we have attachment - upload to ownCloud via RESTapi and purge message. Found some realization for encrypt messages https://github.com/EtiennePerot/gpgit/blob/master/encmaildir.sh but for me more easy just connect to IMAP and do what I want (but I love sieve). Thanks. <http://wiki.dovecot.org/Pigeonhole/Sieve/Plugins/Extprograms>

2 2

Problem with sieve_before
by Ger Hooton Scoil Chroí Íosa Blarney 22 Mar '17

22 Mar '17

Hi All, I cannot get the sieve_before to work. I have dovecot & sieve installed on Debian 7 as follows /etc/dovecot/conf.d/90-sieve.conf : plugin { # The path to the user's main active script. If ManageSieve is used, this the # location of the symbolic link controlled by ManageSieve. sieve = ~/.dovecot.sieve # The default Sieve script when the user has none. This is a path to a global # sieve script file, which gets executed ONLY if user's private Sieve script # doesn't exist. Be sure to pre-compile this script manually using the sievec # command line tool. # --> See sieve_before fore executing scripts before the user's personal # script. sieve_default = /var/lib/dovecot/sieve/default.sieve # Directory for :personal include scripts for the include extension. This # is also where the ManageSieve service stores the user's scripts. sieve_dir = ~/sieve/ # Directory for :global include scripts for the include extension. sieve_global_dir = /var/lib/dovecot/sieve/ # Path to a script file or a directory containing script files that need to be # executed before the user's script. If the path points to a directory, all # the Sieve scripts contained therein (with the proper .sieve extension) are # executed. The order of execution within a directory is determined by the # file names, using a normal 8bit per-character comparison. Multiple script # file or directory paths can be specified by appending an increasing number. sieve_before = /var/lib/dovecot/sieve/before #####sieve_before2 = /var/lib/dovecot/sieve/before/default2.sieve #sieve_before3 = (etc...) # Identical to sieve_before, only the specified scripts are executed after the # user's script (only when keep is still in effect!). Multiple script file or # directory paths can be specified by appending an increasing number. #sieve_after = #sieve_after2 = #sieve_after2 = (etc...) # Which Sieve language extensions are available to users. By default, all # supported extensions are available, except for deprecated extensions or # those that are still under development. Some system administrators may want # to disable certain Sieve extensions or enable those that are not available # by default. This setting can use '+' and '-' to specify differences relative # to the default. For example `sieve_extensions = +imapflags' will enable the # deprecated imapflags extension in addition to all extensions were already # enabled by default. #sieve_extensions = +notify +imapflags ................................. In /var/lib/dovecot/sieve/before I have : drwxrwxrwx 3 mail mail 4096 Mar 20 23:47 .. -rw-rw-rw- 1 root root 195 Mar 21 09:57 default2.svbin -rwxrwxrwx 1 mail mail 157 Mar 21 11:12 default2.sieve default2.sieve is as follows: require ["fileinto"]; if allof (header :matches "subject" "*JUNK*") { fileinto "INBOX.Junk"; } The users personal filters work. Thanks for your help. __________________________________________________ Please consider the environment before printing this email. Ger

3 13

getmail with dovecot delivering problems
by Samuel Reina Calvo 22 Mar '17

22 Mar '17

Hi there, I put together a mail server with postfix+dovecot+mysql with virtual users and it works just fine as internal mail server, but when i put ir under a multidrop email server it sends ok but so far coulnd make getmail to deliver mails correctly. the use of getmail + dovecot downloads email via pop3 but then put all the emails in the same inbox. my maildir is /var/vmail/[domain] getmalirc conf is [retriever]type = MultidropPOP3Retriver server username password envelope_recipient = delivered-to:1 [destination] type = MDA_external path = /usr/local/libexec/dovecot/deliverthen when i run sudo -H -u vmail bash -c 'getmail -g /etc/.getmail -r /etc/.getmail/getmailrc' i get all the time all the messages delivered into /var/vmail/vmail (being vmail the linux user who handles my virtual users) __________ Información de ESET NOD32 Antivirus, versión de la base de firmas de virus 14929 (20170213) __________ ESET NOD32 Antivirus ha comprobado este mensaje. http://www.eset.com

2 1

last_login LDAP - killed with signal 11 (core dumped)
by Leon Kyneur 22 Mar '17

22 Mar '17

Hi I am trying to configure the last_login plugin with LDAP dictionary which is causing dict service to crash. Not sure if this is a bug or some configuration parameter I'm getting wrong? Running latest dovecot but was having the same problem in earlier version 2.2.25 # dovecot --version 2.2.28 (bed8434) I have configured dovecot like so: dovecot.conf (before conf.d/*.conf: dict { #quota = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext #expire = sqlite:/etc/dovecot/dovecot-dict-sql.conf.ext lastlogin = ldap:/etc/dovecot/dovecot-ldap-dict.conf.ext } conf.d/10-master.conf service dict { # If dict proxy is used, mail processes should have access to its socket. # For example: mode=0660, group=vmail and global mail_access_groups=vmail unix_listener dict { mode = 0660 user = vmail group = vmail } } conf.d/20-imap.conf: protocol imap { # Space separated list of plugins to load (default is global mail_plugins). mail_plugins = $mail_plugins last_login # Maximum number of IMAP connections allowed for a user from each IP address. # NOTE: The username is compared case-sensitively. #mail_max_userip_connections = 10 } 90-plugins.conf plugin { #setting_name = value #last_login_dict = proxy::lastlogin last_login_dict = proxy:dict:lastlogin zlib_save = gz zlib_save_level = 6 } dovecot-ldap-dict.conf.ext: uri = ldap://ldap.internal bind_dn = cn=Manager,dc=mail,dc=com password = XXXX tls = no debug = 1 map { pattern = last-login/$user filter = (&(mail=%{user})(objectClass=mailUser)) # the () is required base_dn = o=domains,dc=mail,dc=com username_attribute = mail value_attribute = lastLoginTime fields { mail=$user } } I don't see dovecot ever making a connection to the LDAP server I've configured in the dovecot-ldap-dict.conf.ext file. Log shows ==> /var/log/dovecot.log <== Mar 22 07:49:30 imap-login: Info: Login: user=<leon(a)mail.com>, method=PLAIN, rip=X.X.X.X, lip=X.X.X.X, mpid=36105, secured, session=<o0Lu/0xL4N3LhgGR> Mar 22 07:49:30 dict: Fatal: master: service(dict): child 36107 killed with signal 11 (core dumped) Mar 22 07:49:30 imap(leon(a)mail.com): Error: dict-client: Commit may have failed: Connection closed (reply took 0.015 secs) Mar 22 07:49:30 imap(leon(a)mail.com): Error: last_login_dict: Write was unconfirmed (timeout or disconnect) for user leon(a)mail.com Backtrace: # gdb /var/core/36107 GNU gdb (GDB) Red Hat Enterprise Linux 7.6.1-94.el7 Copyright (C) 2013 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-redhat-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... [New LWP 36107] Reading symbols from /usr/libexec/dovecot/dict...Reading symbols from /usr/lib/debug/usr/libexec/dovecot/dict.debug...done. done. Missing separate debuginfo for Try: yum --enablerepo='*debug*' install /usr/lib/debug/.build-id/b0/07fede01895dec1aca9d8b8993fe27d70a3a20 [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib64/libthread_db.so.1". Core was generated by `dovecot/dict'. Program terminated with signal 11, Segmentation fault. #0 0x0000000000000000 in ?? () (gdb) bt full #0 0x0000000000000000 in ?? () No symbol table info available. #1 0x00007fbcf11bd04f in cmd_begin (cmd=0x7fbcf2c02910, line=<optimized out>) at dict-commands.c:365 trans = 0x7fbcf2c029a0 id = 1 #2 0x00007fbcf11bdef8 in dict_command_input (conn=conn@entry=0x7fbcf2bf24d0, line=line@entry=0x7fbcf2bf48cb "B1") at dict-commands.c:625 cmd_func = 0x7fbcf13c85c0 <cmds+32> cmd = 0x7fbcf2c02910 ret = <optimized out> #3 0x00007fbcf11bc6ee in dict_connection_input_more (conn=0x7fbcf2bf24d0) at dict-connection.c:117 _data_stack_cur_id = 3 line = 0x7fbcf2bf48cb "B1" ret = <optimized out> #4 0x00007fbcf11bc7d2 in dict_connection_input (conn=0x7fbcf2bf24d0) at dict-connection.c:167 line = <optimized out> conn = 0x7fbcf2bf24d0 #5 0x00007fbcf0d1b2d2 in io_loop_call_io (io=0x7fbcf2bf2890) at ioloop.c:599 ioloop = 0x7fbcf2be0740 t_id = 2 __FUNCTION__ = "io_loop_call_io" #6 0x00007fbcf0d1c95f in io_loop_handler_run_internal (ioloop=ioloop@entry=0x7fbcf2be0740) at ioloop-epoll.c:223 ctx = 0x7fbcf2beded0 events = <optimized out> list = 0x7fbcf2bf28f0 io = <optimized out> tv = {tv_sec = 2147483, tv_usec = 0} events_count = <optimized out> msecs = <optimized out> ret = 1 i = 0 call = <optimized out> __FUNCTION__ = "io_loop_handler_run_internal" #7 0x00007fbcf0d1b36c in io_loop_handler_run (ioloop=ioloop@entry=0x7fbcf2be0740) at ioloop.c:648 No locals. #8 0x00007fbcf0d1b528 in io_loop_run (ioloop=0x7fbcf2be0740) at ioloop.c:623 __FUNCTION__ = "io_loop_run" #9 0x00007fbcf0ca4603 in master_service_run (service=0x7fbcf2be05e0, callback=callback@entry=0x7fbcf11be150 <client_connected>) at master-service.c:641 No locals. #10 0x00007fbcf11bbff9 in main (argc=1, argv=0x7fbcf2be0390) at main.c:161 set_roots = {0x7fbcf13c88a0 <dict_setting_parser_info>, 0x0} error = 0x0

2 3

Help
by Bhushan Bhosale 22 Mar '17

22 Mar '17

Hello, I'm getting below error in /var/log/dovecot-proxy.log. Please help. Thanks in advance. Mar 21 14:40:36 tejas3 dovecot: director: Error: Director 192.168.1.11/in disconnected: Connection closed: Illegal seek (connected 0 secs, in=0 out=43, handshake ME not received Regards, Bhushan

2 1

dovecot POP3 log shows too many identical RETR entries
by Bappasaheb Nirmal 22 Mar '17

22 Mar '17

Hello, Dovecot log is showing too many POP3 RETR entries which are identical lines. I also suspect that it is causing high pop traffic eating most of the network bandwidth. Here are some of the lines out of 11009 in a day. Such pattern is observed only for few users. dovecot version is 2.1.17. ============== Mar 20 00:00:07 pi3 dovecot: pop3(user(a)example.com): Disconnected: Logged out top=0/0, retr=1/64014, del=0/1429, size=478762716 Mar 20 00:00:07 pi3 dovecot: pop3-login: Login: user=<user(a)example.com>, method=PLAIN, rip=43.243.173.97, lip=192.168.1.18, mpid=26645, secured, session=<5CGrmRlLyAAr861h> Mar 20 00:00:10 pi3 dovecot: pop3(user(a)example.com): Disconnected: Logged out top=0/0, retr=1/64014, del=0/1429, size=478762716 Mar 20 00:00:11 pi3 dovecot: pop3-login: Login: user=<user(a)example.com>, method=PLAIN, rip=43.243.173.97, lip=192.168.1.18, mpid=29932, secured, session=<k6/gmRlL3gAr861h> Mar 20 00:00:12 pi3 dovecot: pop3(user(a)example.com): Disconnected: Logged out top=0/0, retr=1/64014, del=0/1429, size=478762716 Mar 20 00:00:13 pi3 dovecot: pop3-login: Login: user=<user(a)example.com>, method=PLAIN, rip=43.243.173.97, lip=192.168.1.18, mpid=26819, secured, session=<3DX6mRlLUQAr861h> Mar 20 00:00:14 pi3 dovecot: pop3(user(a)example.com): Disconnected: Logged out top=0/0, retr=1/64014, del=0/1429, size=478762716 Mar 20 00:00:15 pi3 dovecot: pop3-login: Login: user=<user(a)example.com>, method=PLAIN, rip=43.243.173.97, lip=192.168.1.18, mpid=9636, secured, session=<x5ghmhlLjwAr861h> Mar 20 00:00:16 pi3 dovecot: pop3(user(a)example.com): Disconnected: Logged out top=0/0, retr=1/64014, del=0/1429, size=478762716 Mar 20 00:00:17 pi3 dovecot: pop3-login: Login: user=<user(a)example.com>, method=PLAIN, rip=43.243.173.97, lip=192.168.1.18, mpid=4585, secured, session=<8Yw+mhlL0AAr861h> Mar 20 00:00:18 pi3 dovecot: pop3(user(a)example.com): Disconnected: Logged out top=0/0, retr=1/64014, del=0/1429, size=478762716 Mar 20 00:00:18 pi3 dovecot: pop3-login: Login: user=<user(a)example.com>, method=PLAIN, rip=43.243.173.97, lip=192.168.1.18, mpid=30049, secured, session=<UsJOmhlLmAAr861h> Mar 20 00:00:19 pi3 dovecot: pop3(user(a)example.com): Disconnected: Logged out top=0/0, retr=1/64014, del=0/1429, size=478762716 Mar 20 00:00:20 pi3 dovecot: pop3-login: Login: user=<user(a)example.com>, method=PLAIN, rip=43.243.173.97, lip=192.168.1.18, mpid=9636, secured, session=<B6VimhlLNgAr861h> Mar 20 00:00:20 pi3 dovecot: pop3(user(a)example.com): Disconnected: Logged out top=0/0, retr=1/64014, del=0/1429, size=478762716 Mar 20 00:00:20 pi3 dovecot: pop3-login: Login: user=<user(a)example.com>, method=PLAIN, rip=43.243.173.97, lip=192.168.1.18, mpid=4584, secured, session=<pVpxmhlLPwAr861h> Mar 20 00:00:21 pi3 dovecot: pop3(user(a)example.com): Disconnected: Logged out top=0/0, retr=1/64014, del=0/1429, size=478762716 Mar 20 00:00:23 pi3 dovecot: pop3-login: Login: user=<user(a)example.com>, method=PLAIN, rip=43.243.173.97, lip=192.168.1.18, mpid=4585, secured, session=<MlGam ============== What could be the possible reason? Thanks, Bappasaheb

2 2

Crash on doveadm index
by Larry Rosenman 22 Mar '17

22 Mar '17

http://www.lerctr.org/~ler/dovecot/doveadm-2017-03-20.txt doveconf –n attached and at: http://www.lerctr.org/~ler/dovecot/doveconf.n.txt -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 214-642-9640 E-Mail: larryrtx(a)gmail.com US Mail: 17716 Limpia Crk, Round Rock, TX 78664-7281

2 4

Is it possible to use sieve when delivering via pipe to the dovecot deliver command ?
by Thomas Carrié 21 Mar '17

21 Mar '17

Hello, I am using Exim with this delivery configuration: virtual_delivery: driver = pipe command = /usr/lib/dovecot/deliver -d $local_part@$domain -f ... I have enabled manage-sieve and uploaded a simple sieve script that I can see on the server. man page of /usr/lib/dovecot/deliver says it supports sieve. Mail debug is enabled: $ dovecot -n | grep debug mail_debug = yes Delivering a mail shows only this line in dovecot log: Jan 21 17:38:51 myserver dovecot: lda(joe(a)something.com): msgid=<20170121183537.7313f219@homenetwork>: saved mail to INBOX According to page http://wiki2.dovecot.org/Pigeonhole/Sieve/Troubleshooting#Sieve_Scripts_are… I should have a log saying that the sieve plugin is loaded Here is the sieve relevant parts of dovecot -n: # 2.2.13: /etc/dovecot/dovecot.conf ... plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } ... protocols = " imap sieve pop3 sieve" ... protocol lda { mail_plugins = " sieve" } Is there a requirement to use delivery via service (unix socket) so that sieve is enabled? Or is there a configuration thing I forgot ? Thank you for your help Thomas

2 2

Re: Corruption & migration
by Daniel Miller 21 Mar '17

21 Mar '17

Now I'm seeing a bunch of these: 02:28 bubba dovecot: dsync-local(user(a)mydomain.com): Error: bzlib.read(/var/mail/mydomain.com/user/mdbox/storage/m.20): corrupted data at 24123649 Mar 21 11:02:28 bubba dovecot: dsync-local(user(a)mydomain.com): Error: dsync(oldserver.host): read(zlib(/var/mail/mydomain.com/user/mdbox/storage/m.20)) failed: read(/var/mail/mydomain.com/user/mdbox/storage/m.20) failed: bzlib.read(/var/mail/mydomain.com/user/mdbox/storage/m.20): corrupted data at 24123649 (last sent=mail, last recv=mail_request (EOL)) Mar 21 11:02:28 bubba dovecot: doveadm: Error: dsync-remote(user(a)mydomain.com): Error: dsync(localhost): read() failed: read((fd)) failed: dot-input stream ends without '.' line (last sent=mail_request (EOL), last recv=mail) Daniel On 3/20/2017 11:30 PM, Daniel Miller wrote: > I'm getting close - I believe I have one-way replication processing > now. It's amazing watching the mails magically appear in the new > server! I'll tender some updates to the wiki in the hopes it will > help others. > > At this time, I have two errors I haven't been able to eliminate with > config changes: > > dovecot: doveadm: Error: dsync-remote(user(a)mydomain.com): Warning: > Transaction log file > /var/mail/mydomain.com/user/sdbox/mailboxes/INBOX/dbox-Mails/dovecot.index.log > was locked for 109 seconds (rotating while syncing) > Mar 20 23:22:04 bubba dovecot: dsync-local(user(a)mydomain.com): Error: > Remote command returned error 75: ssh -lvmail 192.168.0.4 doveadm > dsync-server -uuser(a)mydomain.com > > I don't know if the transaction lock issue will fix itself via > repeated replication runs. But I have no idea what the "error 75" is. > > Daniel > > > On 3/20/2017 10:05 PM, Daniel Miller wrote: >> I have an existing server using mdbox & sis. There is a quantity of >> corruption - I have no idea where it came in. I'd had a previous >> rebuild some years ago and I thought I had a clean datastore. By >> "corruption" I mean missing attachments and either missing or >> mixed-up emails. >> >> I've setup a new server on a virtual machine. Instead of copying the >> old configs I hand-adjusted individual settings using the current >> distribution example. The new server is running...but empty. >> >> So now my intent is to migrate the mail to the new machine. A few >> items to note: >> 1. The existing mail server is the virtual host. The mails are >> stored locally, in mdbox format, with sis enabled. And possibly zlib. >> 2. The new server, via VirtualBox, is presently configured for >> Maildir. I may change to sdbox - I'm now a little reserved about mdbox. >> 3. Instead of storing the mails within the virtual machine, I'm >> using the host's drive. This is via an exported NFS4 folder from the >> host, mounted on the guest, using the options: >> "auto,noatime,hard,intr,async,nordirplus". >> 4. My intent is to have the new virtual server become the primary >> mail server. The mail store will continue to be accessed by NFS4. No >> other servers or processes (besides backup) should access the mail >> store. >> >> So...my question is what is the best method for the migration? >> >> Reading the docs on Dovecot replication I'm still very unsure of how >> to implement it - particularly the "master-master" or "master-client" >> relationships. The docs are not 100% clear on which server gets >> which options. I can guess...which I'd really rather not do. But it >> seems to me getting one-way replication working would be the most >> "elegant" solution here. >> >> Manual dsync is also an option - but again I'm not on which machine I >> should execute which options. >> >> Imapsync is a possibility and the syntax is clear - but very slow in >> execution for 100k mails. >> >> Any suggestions or pointers would be welcome. >>

1 0

New Member
by Ger Hooton Scoil Chroí Íosa Blarney 21 Mar '17

21 Mar '17

Hi All, Before I start posting where /how can I check to see if the question I wish to ask about has already been covered? __________________________________________________ Please consider the environment before printing this email. Ger

3 2

Re: Dovecot can't connect to openldap over starttls [REQUEST OF OPENLDAP]
by info＠gwarband.de 21 Mar '17

21 Mar '17

Can sombody say something about this request? This is an email from the openldap-technical mailinglist from openldap. Systemdetails are mention in the other email. -------- Originalnachricht -------- Betreff: Re: Dovecot can't connect to openldap over starttls Datum: 2017-03-20 16:18 Absender: Dan White <dwhite(a)cafedemocracy.org> Empfänger: info(a)gwarband.de Kopie: openldap-technical(a)openldap.org On 03/20/17 16:06 +0100, info(a)gwarband.de wrote: >> Debug Dovecot's implementation of ldap_start_tls_s(). > I don't have any idea how to set a higher debug level to dovecot. In > my opinion I have the highest. So I can't deliver a greater log. I recommend consulting Dovecot's advice on how to run a debugger, or dig into the code which calls libldap.

2 8

doveadm-sync stateful
by Cédric ML 21 Mar '17

21 Mar '17

Hello, I'm trying to migrate mail accounts from an old server to a new one. As I need to migrate dozens of accounts which take about 1G each, I need to do stateful sync to make my migration in two times : 1 - I run a : doveadm -D -o mail_fsync=never -o imapc_user=user1(a)olddomain.fr sync -s "" -R -1 -u user1(a)newdomain.fr imapc: > /tmp/firstsync.log 2>&1 my accounts are synced, and I get a "state" string (AQAAAHm4+Jk=) as the output of doveadm sync command. 2 - Changes are made on the old server, and I expect next dsync will sync only the changes / new mails. So I run a : doveadm -D -o mail_fsync=never -o imapc_user=user1(a)olddomain.fr sync -s "AQAAAHm4+Jk=" -R -1 -u user1(a)newdomain.fr imapc: > /tmp/secondsync.log 2>&1 My problem is that state of messages are not synchronized (mails marked as read on old server are still unread on new server, mails moved on a folder on the old server are still in the INBOX of new server). The full debug of ran commands is available here : http://fpaste.scsys.co.uk/557551 The result of "doveconf -n" is available here : http://fpaste.scsys.co.uk/557552 I'm using version 2.2.27 Can anyone tell me if I'm doing something wrong ? How can I debug more ? Regards, Cédric

2 2

Re: Corruption & migration
by Daniel Miller 21 Mar '17

21 Mar '17

I'm getting close - I believe I have one-way replication processing now. It's amazing watching the mails magically appear in the new server! I'll tender some updates to the wiki in the hopes it will help others. At this time, I have two errors I haven't been able to eliminate with config changes: dovecot: doveadm: Error: dsync-remote(user(a)mydomain.com): Warning: Transaction log file /var/mail/mydomain.com/user/sdbox/mailboxes/INBOX/dbox-Mails/dovecot.index.log was locked for 109 seconds (rotating while syncing) Mar 20 23:22:04 bubba dovecot: dsync-local(user(a)mydomain.com): Error: Remote command returned error 75: ssh -lvmail 192.168.0.4 doveadm dsync-server -uuser(a)mydomain.com I don't know if the transaction lock issue will fix itself via repeated replication runs. But I have no idea what the "error 75" is. Daniel On 3/20/2017 10:05 PM, Daniel Miller wrote: > I have an existing server using mdbox & sis. There is a quantity of > corruption - I have no idea where it came in. I'd had a previous > rebuild some years ago and I thought I had a clean datastore. By > "corruption" I mean missing attachments and either missing or mixed-up > emails. > > I've setup a new server on a virtual machine. Instead of copying the > old configs I hand-adjusted individual settings using the current > distribution example. The new server is running...but empty. > > So now my intent is to migrate the mail to the new machine. A few > items to note: > 1. The existing mail server is the virtual host. The mails are > stored locally, in mdbox format, with sis enabled. And possibly zlib. > 2. The new server, via VirtualBox, is presently configured for > Maildir. I may change to sdbox - I'm now a little reserved about mdbox. > 3. Instead of storing the mails within the virtual machine, I'm using > the host's drive. This is via an exported NFS4 folder from the host, > mounted on the guest, using the options: > "auto,noatime,hard,intr,async,nordirplus". > 4. My intent is to have the new virtual server become the primary > mail server. The mail store will continue to be accessed by NFS4. No > other servers or processes (besides backup) should access the mail store. > > So...my question is what is the best method for the migration? > > Reading the docs on Dovecot replication I'm still very unsure of how > to implement it - particularly the "master-master" or "master-client" > relationships. The docs are not 100% clear on which server gets which > options. I can guess...which I'd really rather not do. But it seems > to me getting one-way replication working would be the most "elegant" > solution here. > > Manual dsync is also an option - but again I'm not on which machine I > should execute which options. > > Imapsync is a possibility and the syntax is clear - but very slow in > execution for 100k mails. > > Any suggestions or pointers would be welcome. >

1 0

Corruption & migration
by Daniel Miller 21 Mar '17

21 Mar '17

I have an existing server using mdbox & sis. There is a quantity of corruption - I have no idea where it came in. I'd had a previous rebuild some years ago and I thought I had a clean datastore. By "corruption" I mean missing attachments and either missing or mixed-up emails. I've setup a new server on a virtual machine. Instead of copying the old configs I hand-adjusted individual settings using the current distribution example. The new server is running...but empty. So now my intent is to migrate the mail to the new machine. A few items to note: 1. The existing mail server is the virtual host. The mails are stored locally, in mdbox format, with sis enabled. And possibly zlib. 2. The new server, via VirtualBox, is presently configured for Maildir. I may change to sdbox - I'm now a little reserved about mdbox. 3. Instead of storing the mails within the virtual machine, I'm using the host's drive. This is via an exported NFS4 folder from the host, mounted on the guest, using the options: "auto,noatime,hard,intr,async,nordirplus". 4. My intent is to have the new virtual server become the primary mail server. The mail store will continue to be accessed by NFS4. No other servers or processes (besides backup) should access the mail store. So...my question is what is the best method for the migration? Reading the docs on Dovecot replication I'm still very unsure of how to implement it - particularly the "master-master" or "master-client" relationships. The docs are not 100% clear on which server gets which options. I can guess...which I'd really rather not do. But it seems to me getting one-way replication working would be the most "elegant" solution here. Manual dsync is also an option - but again I'm not on which machine I should execute which options. Imapsync is a possibility and the syntax is clear - but very slow in execution for 100k mails. Any suggestions or pointers would be welcome. -- Daniel

1 0

Re: Dovecot 2.2.27 proxy - enforcing per client IP connection limits
by Joseph Tam 20 Mar '17

20 Mar '17

Sami Ketola writes: >> Can anyone with Solr installed confirm/refute this: does installing >> Solr keep iOS clients from roofing the connection count? > > I doubt it, but since IMAP SEARCH goes all the way down to the backends > mail_max_userip_connections can be used to limit the number of > connections. Understood -- that's the current situation I'm in now. Our iOS users would launch a search resulting in a connection burst, hit the connection cap, log out all IMAP sessions out, then start the cycle again. This sometimes lasts for 10's of minutes. I'm not sure what the users sees. Sample logs entries: Mar 19 01:21:30 server dovecot: imap-login: Login: user=<user> ... [... 14 similar logins removed ...] Mar 19 01:21:41 server dovecot: imap-login: Login: user=<user> ... Mar 19 01:21:42 server dovecot: imap-login: Maximum number of connections from user+IP exceeded (mail_max_userip_connections=16) : user=<user> ... Mar 19 01:21:42 server dovecot: imap(user): Logged out in=425 out=1107 [... 14 similar logouts removed ...] Mar 19 01:21:42 server dovecot: imap(user): Logged out in=382 out=1107 Mar 19 01:21:42 server dovecot: imap-login: Login: user=<user> ... Mar 19 01:21:42 server dovecot: imap-login: Login: user=<user> ... Mar 19 01:21:43 server dovecot: imap-login: Login: user=<user> ... Mar 19 01:21:44 server dovecot: imap-login: Login: user=<user> ... Mar 19 01:21:44 server dovecot: imap(user): Logged out in=442 out=1173 Mar 19 01:21:44 server dovecot: imap(user): Logged out in=442 out=1155 Mar 19 01:21:44 server dovecot: imap(user): Logged out in=442 out=1166 Mar 19 01:21:44 server dovecot: imap(user): Logged out in=442 out=1174 Mar 19 01:21:44 server dovecot: imap-login: Login: user=<user> ... Mar 19 01:21:47 server dovecot: imap-login: Login: user=<user> ... Mar 19 01:21:47 server dovecot: imap-login: Login: user=<user> ... Mar 19 01:21:48 server dovecot: imap-login: Login: user=<user> ... Mar 19 01:21:48 server dovecot: imap-login: Login: user=<user> ... Mar 19 01:21:49 server dovecot: imap-login: Login: user=<user> ... { ... and on and on for the next 10 minutes ... } However, there is a pause between each login that might be long enough to squeeze the search results in if given quickly enough. From the I/O stats, most of these searches have empty results. It probably won't prevent the connection cap problem, but it might minimize the length and severity of these connection storms. Of course, the real fix is for iOS mail-app developers to stop assuming the IMAP server is owned exclusively by the user by configuring some reasonable connection throttles. Joseph Tam <jtam.home(a)gmail.com>

2 1

Dovecot can't connect to openldap over starttls
by info＠gwarband.de 20 Mar '17

20 Mar '17

Hello guys, actually I'm trying to configure dovecot to access openldap for passwordcheck. My openldap is only allow access over "secure ldap". The dovecot can communicate with the openldap server but there is maybe a failure in the sslhandshake. Additional information you can find in the logs or in the dump below. Also I have my ldap config from dovecot in the links below. I have already created an bug reporting in the system of openldap but the answer was to get support from her. All datalinks: https://gwarband.de/openldap/dovecot.log https://gwarband.de/openldap/dovecot-ldap.conf https://gwarband.de/openldap/openldap.log https://gwarband.de/openldap/trace.dump The bugreportinglink from openldap: http://www.openldap.org/its/index.cgi/Incoming?id=8615 I hope you can help me. Regards. Tobias Warband

2 10

Can't verify remote server certs without trusted CAs (ssl_client_ca_* settings)
by Ralf Hildebrandt 20 Mar '17

20 Mar '17

Hi! I upgraded the 2.2 packages today (from 2:2.2.28-1~auto+5 to 2:2.2.28-1~auto+8) I now I'm getting an error: Mar 20 13:25:58 mproxy dovecot: auth: Error: imapc(email.charite.de:993): Couldn't initialize SSL context: Can't verify remote server certs without trusted CAs (ssl_client_ca_* settings) I checked, and alas, I had ssl_client_ca_dir = ssl_client_ca_file = So I set: ssl_client_ca_file = </etc/ssl/certs/ca-certificates.crt But I'm still getting the error above. I addition, dovecot is crashing with SIGSEGV: Mar 20 13:28:23 mproxy dovecot: auth: Error: imapc(email.charite.de:993): Couldn't initialize SSL context: Can't verify remote server certs without trusted CAs (ssl_client_ca_* settings) Mar 20 13:28:23 mproxy dovecot: auth: Error: imapc(email.charite.de:993): No SSL context Mar 20 13:28:23 mproxy dovecot: auth: Error: imap(la***sch,87.77.180.61): Disconnected from server Mar 20 13:28:23 mproxy postfix/submission/smtpd[32682]: warning: zb43d.pia.fu-berlin.de[87.77.180.61]: SASL PLAIN authentication failed: Connection lost to authentication server Mar 20 13:28:23 mproxy dovecot: auth: Fatal: master: service(auth): child 32685 killed with signal 11 (core dumped) -- Ralf Hildebrandt Geschäftsbereich IT | Abteilung Netzwerk Charité - Universitätsmedizin Berlin Campus Benjamin Franklin Hindenburgdamm 30 | D-12203 Berlin Tel. +49 30 450 570 155 | Fax: +49 30 450 570 962 ralf.hildebrandt(a)charite.de | http://www.charite.de

2 5

doveadm proxy password
by Angel L. Mateo 20 Mar '17

20 Mar '17

Hi, I'm configuring a proxy host to connect to backend servers. As proxy is done based on an LDAP attribute of the user, I'm not using director. In the proxy server I have configured: doveadm_port = 24245 doveadm_password = secret And in the backend: service doveadm { inet_listener { port = 24245 } } local <mynetwork> { doveadm_password = secret } But when I run a doveadm command in the proxy I get: amateo_adm@musio10:/etc/dovecot/conf.d$ sudo doveadm quota get -u amateo(a)um.es doveadm(amateo(a)um.es): Error: doveadm authentication failed () doveadm(amateo(a)um.es): Error: myotis50.um.es:24245: Command quota get failed for amateo(a)um.es: EOF Quota name Type Value Limit % And in the backed I get: Mar 20 15:52:01 myotis50 dovecot: doveadm: Error: doveadm client authenticated with wrong password I have checked with tcpdump and in the command is sending the base64 encoding of "doveadmsecret" Any help? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información y las Comunicaciones Aplicadas (ATICA) http://www.um.es/atica Tfo: 868889150 Fax: 868888337

1 0

Re: Dovecot 2.2.27 proxy - enforcing per client IP connection limits
by Joseph Tam 20 Mar '17

20 Mar '17

Adi Pircalabu writes: > For us it is, we're periodically getting hammered by iOS devices that > try to open 300+ simultaneous IMAP connections for a single user from > the same IP, while the average hovers usually below 50 for the busier > mailboxes with many folders. Oh yeah, I've seen this. I think this happens when someone does a global pattern search, which causes the client to launch IMAP SEARCH commands on each and every mailbox. I've wondered whether installing Solr would alleviate this: it wouldn't directly address the connection limit problem, but perhaps it can return results fast enough to keep the concurrent connections count down. Can anyone with Solr installed confirm/refute this: does installing Solr keep iOS clients from roofing the connection count? Joseph Tam <jtam.home(a)gmail.com>

2 1

Mail restore and single storage attachement
by Jean-Luc Oms 20 Mar '17

20 Mar '17

Bonjour, I'm finishing the upgrade of an old installation of Dovecot/postfix mail system for my lab. In the configuration i plan ( dovecot 2.2.27 ), i choose to use: - mdbox format - single storage for attachements - 2 zfs file systems, one for mdboxes, the other for attachments The last tests before production concern my hability to restore a lost mail (or mailbox) ... (lot of changes when you are used to mbox format). 1) I uses doveadm import to restore part of mail from one of the zfs snapshot with a cde like: doveadm -Dv import -U bof2 -s -u bof2 mdbox:/mailpool/lirmm/.zfs/snapshot/zfs-auto-snap_frequent-2017-03-15-1645/vmail/bof2/mdbox Recup-AAAA mailbox AAAA I get this error: doveadm(bof2): Error: open() failed with file /mailpool/lirmm/.zfs/snapshot/zfs-auto-snap_frequent-2017-03-15-1645/vmail/bof2/mdbox/mailboxes/AAAA/dbox-Mails/dovecot.index.log: Read-only file system Thats right, my snapshot is ro, but why the import has to write to the source ? I'm missing something ? 2) I don't find any way to specify a source for attachements with the import command, then I first restore all the atachements from one snapshot, then make import, then purge. Is there a way to use a source for attachement file tree, or a command to find the mssing files for the import command ? Thanks -- __________________________________________ Jean-Luc Oms STI-RéseauX - LIRMM - CNRS/UM2 161 rue Ada - BAT 4 - CC 477 34095 Montpellier cedex 5 Tel +33 4 67 41 85 93 Urg +33 6 32 01 04 17 __________________________________________

1 1

Deploying Diffie-Hellman for TLS
by Jerry 20 Mar '17

20 Mar '17

I have been reading up on TLS and Dovecot and came across this URL: https://www.weakdh.org/sysadmin.html which recommended these settings for Dovecot. I would like to know if they are correct? Some much documentation on the web is pure garbage. Dovecot These changes should be made in /etc/dovecot.conf Cipher Suites ssl_cipher_list=ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256:kEDH+AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:DHE-RSA-AES256-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:AES:CAMELLIA:DES-CBC3-SHA:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!MD5:!PSK:!aECDH:!EDH-DSS-DES-CBC3-SHA:!EDH-RSA-DES-CBC3-SHA:!KRB5-DES-CBC3-SHA ssl_prefer_server_ciphers = yes (Dovecot 2.2.6 or greater) DH parameters #regenerates every week ssl_dh_parameters_length = 2048 Contrary to what the site recommends, I would have thought that changes should be made in the "10-ssl.conf" file. I am running "Dovecot 2.2.28" on a FreeBSD-11 machine with OpenSSL 1.0.2k, if that makes any difference. Thanks -- Jerry

2 1

Server migration
by Gandalf Corvotempesta 20 Mar '17

20 Mar '17

Hi to all. It's time to migrate an old server to a newer platform Some questions: 1) what happens by changing the pop3/IMAP server on the client? Is the client (Outlook, Thunderbird,...) smart enough to not download every message again? I'm asking this because the easier way to migrate would be move all mailboxes to the new server and then change the hostname on the client 2) what if I add a dovecot proxy on the new server, proxing back all requests to the older one, if the mailbox is still not migrated? Would the whole pop3/IMAP transaction happen through the proxy or there is something an http redirect (or anything similiar to the SIP protocol) ? 3) I think the response to this is no: is dovecot able to log the hostname used for the connection? I have multiple domains pointing to the same IP. Something like the Host header in Http.

2 1

[Bug] Mailbox aliases still broken
by azurit＠pobox.sk 20 Mar '17

20 Mar '17

Hi, about an year ago i was reporting a bug in mailbox aliases, which remains unfixed and unasnwered (probably totally ignored, don't understand why). I thought it was because the bug is old and already fixed but yesterday i upgraded to Dovecot 2.2.24 and problem persists. Here is the original report, everything, except the Dovecot version, is still correct: http://dovecot.org/list/dovecot/2015-June/101176.html Will this be fixed? Thanks for info. azur

4 7

dovecot problem with ssl
by Nilton Jose Rizzo 19 Mar '17

19 Mar '17

Hi all, I already searched for this error on google and nothing I never install dovecot, this is a first time. This error, I know, is too newbie and stupid, but I checked more than twice. root@server:/usr/local/etc/dovecot # sievec /home3/virtual/default.sieve doveconf: Fatal: Error in configuration file /usr/local/etc/dovecot/conf.d/10-ssl.conf line 7: Unknown setting: ssl root@server:/usr/local/etc/dovecot # I'm running a FreeBSD 12-current and compile all from ports (mysql, dovecot2, portfix3.1, and all needs ports, but this error don't leave. I'm fowling this tutorial to install all, but when I'll run a sievec this stop with this error. I'm not new in FreeBSD, I'm have good experience in FreeBSD. --- /************************************************* **Nilton José Rizzo UFRRJ **http://www.rizzo.eng.br http://www.ufrrj.br **http://lattes.cnpq.br/0079460703536198 **************************************************/

4 11

replication issues between to nodes
by Remko Lodder 18 Mar '17

18 Mar '17

Hi, Some time ago I posted the below but never got a reponse that I could work with. So i am retrying now in the hope that there might be a better idea/suggestion on how to approach this. Situation; I have two nodes, which should replicate to eachother. My main machine receives most mail and the other one receives mostly system messages and should get replicated. (This used to be delivered on both machines, but given the issues below I had to make sure that the customer email at least arrives on machine A, as detailed below). When a mail arrives on main machine (A) everything is fine and things are synchronised asap. Customers can see the email directly via webmail/imap. When a mail arrives on the secondary machine (B) the replication is not issued until machine A starts a sync session. Customers do not see the email on machine A via webmail/imap. When a mail arrives on A, the synchronisation occurs, and all messages on B, not yet on A, are synchronised as well. Customers can now see the email on machine A as well via webmail/imap. Sadly this can mean that emails that became visible are hours late (read: were delivered hours before, but not visible for the customer). Both machines are configured through puppet, only individual settings like IP addresses and certificates are different because well, they have to. I included the difference below, and both ‘doveconf -n’s. If someone has a suggestion on seeing why machine B is not issueing (or does not seem to issue) replication, let me know. I verified that I can connect to the remote machines via IPv4 and IPv6 (for doveadm / replication purposes). Difference between configurations; --- tmp1.txt 2017-03-18 15:18:41.000000000 +0100 +++ tmp2.txt 2017-03-18 15:18:56.000000000 +0100 @@ -55,7 +55,7 @@ imapsieve_mailbox2_name = * mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size - mail_replica = tcps:mail.jr-hosting.nl:12346 + mail_replica = tcps:mail2.jr-hosting.nl:12346 sieve = ~/.dovecot.sieve sieve_dir = ~/sieve sieve_execute_bin_dir = /usr/local/lib/dovecot/sieve @@ -105,7 +105,7 @@ } service lmtp { inet_listener lmtp { - address = XXX/X 127.0.0.1 ::1 + address = YYYY/Y 127.0.0.1 ::1 port = 24 } unix_listener /var/spool/postfix/private/dovecot-lmtp { @@ -123,8 +123,8 @@ mode = 0666 } } -ssl_ca = </usr/local/etc/letsencrypt/live/mail2.jr-hosting.nl/fullchain.pem -ssl_cert = </usr/local/etc/letsencrypt/live/mail2.jr-hosting.nl/cert.pem +ssl_ca = </usr/local/etc/letsencrypt/live/mail.jr-hosting.nl/fullchain.pem +ssl_cert = </usr/local/etc/letsencrypt/live/mail.jr-hosting.nl/cert.pem ssl_client_ca_file = /usr/local/certificates/letsencrypt-ca.pem ssl_key = # hidden, use -P to show it ssl_protocols = !SSLv2 !SSLv3 Machine A (the best working machine) # 2.2.28 (bed8434): /usr/local/etc/dovecot/dovecot.conf # Pigeonhole version 0.4.17 (e179378) # OS: FreeBSD 11.0-RELEASE-p8 amd64 auth_mechanisms = plain login disable_plaintext_auth = no doveadm_password = # hidden, use -P to show it haproxy_trusted_networks = XXXX/X lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes lmtp_save_to_detail_mailbox = yes mail_debug = yes mail_fsync = always mail_location = mdbox:~/mdbox mail_plugins = " quota notify replication" managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext imapsieve namespace { inbox = yes location = mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Spam { auto = subscribe special_use = \Junk } mailbox Trash { auto = subscribe special_use = \Trash } prefix = separator = . } passdb { driver = pam } plugin { imapsieve_mailbox1_before = file:/usr/local/lib/dovecot/sieve/report-spam.sieve imapsieve_mailbox1_causes = COPY imapsieve_mailbox1_name = Spam imapsieve_mailbox2_before = file:/usr/local/lib/dovecot/sieve/report-ham.sieve imapsieve_mailbox2_causes = COPY imapsieve_mailbox2_from = Spam imapsieve_mailbox2_name = * mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size mail_replica = tcps:mail2.jr-hosting.nl:12346 sieve = ~/.dovecot.sieve sieve_dir = ~/sieve sieve_execute_bin_dir = /usr/local/lib/dovecot/sieve sieve_global_dir = /usr/local/etc/dovecot/sieve/global/ sieve_global_extensions = +vnd.dovecot.pipe +vnd.dovecot.execute sieve_global_path = /usr/local/etc/dovecot/sieve/default.sieve sieve_pipe_bin_dir = /usr/local/lib/dovecot/sieve sieve_plugins = sieve_imapsieve sieve_extprograms } postmaster_address = postmaster(a)jr-hosting.nl protocols = imap pop3 lmtp sieve replication_dsync_parameters = -d -N -l 60 -U replication_max_conns = 100 service aggregator { fifo_listener replication-notify-fifo { mode = 0666 } unix_listener replication-notify { mode = 0666 } } service auth { unix_listener /var/spool/postfix/private/auth { mode = 0666 } } service doveadm { inet_listener { port = 12346 ssl = yes } } service imap-login { inet_listener imap_haproxy { haproxy = yes port = 10143 } inet_listener imaps_haproxy { haproxy = yes port = 10144 ssl = yes } service_count = 1 } service imap { process_limit = 1024 } service lmtp { inet_listener lmtp { address = XXXX/X 127.0.0.1 ::1 port = 24 } unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0600 user = postfix } } service pop3 { process_limit = 1024 } service replicator { process_min_avail = 1 unix_listener replicator-doveadm { mode = 0666 } } ssl_ca = </usr/local/etc/letsencrypt/live/mail.jr-hosting.nl/fullchain.pem ssl_cert = </usr/local/etc/letsencrypt/live/mail.jr-hosting.nl/cert.pem ssl_client_ca_file = /usr/local/certificates/letsencrypt-ca.pem ssl_key = # hidden, use -P to show it ssl_protocols = !SSLv2 !SSLv3 userdb { driver = passwd } verbose_proctitle = yes protocol lmtp { auth_username_format = %n mail_plugins = quota sieve postmaster_address = postmaster(a)jr-hosting.nl } protocol lda { mail_plugins = " quota notify replication sieve" } protocol imap { mail_max_userip_connections = 50 mail_plugins = " quota notify replication imap_quota imap_sieve” } Machine B: # 2.2.28 (bed8434): /usr/local/etc/dovecot/dovecot.conf # Pigeonhole version 0.4.17 (e179378) # OS: FreeBSD 11.0-RELEASE-p8 amd64 auth_mechanisms = plain login disable_plaintext_auth = no doveadm_password = # hidden, use -P to show it haproxy_trusted_networks = XXX/X lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes lmtp_save_to_detail_mailbox = yes mail_debug = yes mail_fsync = always mail_location = mdbox:~/mdbox mail_plugins = " quota notify replication" managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext imapsieve namespace { inbox = yes location = mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Spam { auto = subscribe special_use = \Junk } mailbox Trash { auto = subscribe special_use = \Trash } prefix = separator = . } passdb { driver = pam } plugin { imapsieve_mailbox1_before = file:/usr/local/lib/dovecot/sieve/report-spam.sieve imapsieve_mailbox1_causes = COPY imapsieve_mailbox1_name = Spam imapsieve_mailbox2_before = file:/usr/local/lib/dovecot/sieve/report-ham.sieve imapsieve_mailbox2_causes = COPY imapsieve_mailbox2_from = Spam imapsieve_mailbox2_name = * mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size mail_replica = tcps:mail.jr-hosting.nl:12346 sieve = ~/.dovecot.sieve sieve_dir = ~/sieve sieve_execute_bin_dir = /usr/local/lib/dovecot/sieve sieve_global_dir = /usr/local/etc/dovecot/sieve/global/ sieve_global_extensions = +vnd.dovecot.pipe +vnd.dovecot.execute sieve_global_path = /usr/local/etc/dovecot/sieve/default.sieve sieve_pipe_bin_dir = /usr/local/lib/dovecot/sieve sieve_plugins = sieve_imapsieve sieve_extprograms } postmaster_address = postmaster(a)jr-hosting.nl protocols = imap pop3 lmtp sieve replication_dsync_parameters = -d -N -l 60 -U replication_max_conns = 100 service aggregator { fifo_listener replication-notify-fifo { mode = 0666 } unix_listener replication-notify { mode = 0666 } } service auth { unix_listener /var/spool/postfix/private/auth { mode = 0666 } } service doveadm { inet_listener { port = 12346 ssl = yes } } service imap-login { inet_listener imap_haproxy { haproxy = yes port = 10143 } inet_listener imaps_haproxy { haproxy = yes port = 10144 ssl = yes } service_count = 1 } service imap { process_limit = 1024 } service lmtp { inet_listener lmtp { address = XXXX/X 127.0.0.1 ::1 port = 24 } unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0600 user = postfix } } service pop3 { process_limit = 1024 } service replicator { process_min_avail = 1 unix_listener replicator-doveadm { mode = 0666 } } ssl_ca = </usr/local/etc/letsencrypt/live/mail2.jr-hosting.nl/fullchain.pem ssl_cert = </usr/local/etc/letsencrypt/live/mail2.jr-hosting.nl/cert.pem ssl_client_ca_file = /usr/local/certificates/letsencrypt-ca.pem ssl_key = # hidden, use -P to show it ssl_protocols = !SSLv2 !SSLv3 userdb { driver = passwd } verbose_proctitle = yes protocol lmtp { auth_username_format = %n mail_plugins = quota sieve postmaster_address = postmaster(a)jr-hosting.nl } protocol lda { mail_plugins = " quota notify replication sieve" } protocol imap { mail_max_userip_connections = 50 mail_plugins = " quota notify replication imap_quota imap_sieve” }

1 0

sievec
by Robert Moskowitz 17 Mar '17

17 Mar '17

I am building a new mailserver on Centos7. My sieve is created with: mkdir /home/sieve cat <<EOF>/home/sieve/globalfilter.sieve || exit 1 require "fileinto"; if exists "X-Spam-Flag" { if header :contains "X-Spam-Flag" "NO" { } else { fileinto "Spam"; stop; } } if header :contains "subject" ["***SPAM***"] { fileinto "Spam"; stop; } EOF chown -R vmail:mail /home/sieve But in 90-sieve.conf there is the comment: # A path to a global sieve script file, which gets executed ONLY # if user's private Sieve script doesn't exist. Be sure to # pre-compile this script manually using the sievec command line # tool. #sieve_global_path = /var/lib/dovecot/sieve/default.sieve Do I run sievec on this script? And I found the following comment on a blog, about 3 years old: 2: Having a user-defined sieve script will cancel out the global script for redirecting spam. In the dovecot.conf, get rid of the sieve_global_path and sieve_global_dir, and instead use: sieve_before = /path/to/global.sieve -- what this will do is make sure that the global script runs before any user scripts, which allows the spam redirecting to actually work. What is current situation on this? thank you

4 8

Do I need to configure director?
by Angel L. Mateo 17 Mar '17

17 Mar '17

Hi, I'm configuring a farm of dovecot proxies redirecting users to backend servers. The decision of which backend server is used for a user is based in its ldap account information. In my previous configuration I was using an inherited director configuration in these proxy servers, but now I was wondering that because the decision is made according to user information, I don't need to run director. Do it? Is there any advantage of running director in this scenario? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información y las Comunicaciones Aplicadas (ATICA) http://www.um.es/atica Tfo: 868889150 Fax: 868888337

2 2

Replication Troubles
by Wolfgang Hennerbichler 16 Mar '17

16 Mar '17

Hi Dovecot Users, I’ve configured dovecot dsync replication and I see troubles in the logs and get user complaints which I can’t explain. I found similar threads on this mailinglist, but I couldn’t find a solution anywhere. Does anybody have dsync running without problems on a high volume mailserver? I see the following logs, examples given: Feb 17 18:16:49 dovecot dovecot: imap(zoechi): Warning: /var/mail/zoechi/dovecot-uidlist: Duplicate file entry at line 10395: 1487350019.M138380P28563.dovecot.wogri.at,S=18930,W=19377 (uid 41092 -> 41093) - retrying by re-reading from beginning with this one I’m not sure - it might be that this is completely OK because due to replication UIDs clash. Maybe that’s OK, but I couldn’t find a confirmation. Feb 17 18:16:49 dovecot dovecot: imap(zoechi): Warning: Maildir /var/mail/zoechi: Expunged message reappeared, giving a new UID (old uid=41092, file=1487350019.M138380P28563.dovecot.wogri.at,S=18930,W=19377) This one is definitely a problem, deleted messages re-appear in the mailbox. I made sure that the 2 hosts doing replication have different hostnames. I run 2.2.27 (from debian-jessie backports). Config below. Thanks for hints (or pointers to other example configs where dsync works without problems) # dovecot -n # 2.2.27 (c0f36b0): /etc/dovecot/dovecot.conf # Pigeonhole version 0.4.16 (fed8554) # OS: Linux 4.8.14 x86_64 Debian 8.7 ext4 auth_verbose = yes debug_log_path = /var/log/dovecot.debug doveadm_password = # hidden, use -P to show it first_valid_gid = 106 first_valid_uid = 104 hostname = localhost last_valid_gid = 106 last_valid_uid = 104 mail_gid = dovecot mail_location = maildir:/var/mail/%n mail_plugins = quota fts fts_lucene virtual notify replication mail_temp_dir = /var/lib/dovecot/tmp mail_uid = dovecot managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext editheader namespace { list = children location = virtual:/var/mail/%n/virtual prefix = virtual. separator = . } namespace inbox { inbox = yes list = yes location = mailbox "Deleted Messages" { auto = subscribe special_use = \Trash } mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { auto = no special_use = \Sent } mailbox Spam { auto = subscribe special_use = \Junk } mailbox Trash { special_use = \Trash } prefix = separator = . subscriptions = yes type = private } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { default_language = de fts = lucene fts_lucene = whitespace_chars=@. mail_replica = tcp:172.16.1.1:12345 quota = maildir:User quota quota_rule = *:storage=5G quota_rule2 = Trash:storage=+200M quota_rule3 = Spam:ignore quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u sieve = /etc/sieve/%n.sieve sieve_default = /etc/sieve/default.sieve sieve_dir = ~/sieve sieve_extensions = +editheader } pop3_deleted_flag = $POP3Deleted postmaster_address = postmaster(a)wogri.at protocols = " imap lmtp sieve pop3" service aggregator { fifo_listener replication-notify-fifo { user = dovecot } unix_listener replication-notify { user = dovecot } } service doveadm { inet_listener { port = 12345 } } service imap { process_limit = 1024 } service lmtp { inet_listener lmtp { port = 2003 } unix_listener lmtp { user = dovecot } user = dovecot } service managesieve-login { inet_listener sieve { port = 4190 } service_count = 1 } service pop3 { process_limit = 1024 } service quota-warning { executable = script /usr/local/sbin/quota-warning.sh unix_listener quota-warning { user = dovecot } user = dovecot } service replicator { process_min_avail = 1 unix_listener replicator-doveadm { mode = 0600 } } ssl = required ssl_cert = </etc/dovecot/server.cert.pem ssl_key = # hidden, use -P to show it userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocol lmtp { mail_plugins = quota sieve virtual notify replication } protocol lda { mail_plugins = quota fts fts_lucene virtual notify replication sieve } protocol imap { mail_max_userip_connections = 50 mail_plugins = quota fts fts_lucene virtual notify replication imap_quota } protocol pop3 { mail_plugins = quota fts fts_lucene virtual notify replication } local 2a00:XXX::/64 { doveadm_password = # hidden, use -P to show it }

3 4

Timeout Leak
by Luciano Mannucci 16 Mar '17

16 Mar '17

Hello all, I've got 3 occurences of this message in my log file: auth: Warning: Timeout leak: 0x805e480 (auth-request-handler.c:550) Can I ignore it, or is it a syhmptom of something wrong? I'm running dovecot 2.2.28 (bed8434). I'll post my doveconf -n if it is worth investigating further... Cheers, Luciano. -- /"\ /Via A. Salaino, 7 - 20144 Milano (Italy) \ / ASCII RIBBON CAMPAIGN / PHONE : +39 2 485781 FAX: +39 2 48578250 X AGAINST HTML MAIL / E-MAIL: posthamster(a)sublink.sublink.ORG / \ AND POSTINGS / WWW: http://www.lesassaie.IT/

2 2

'doveadm who' behind nginx mail proxy
by Edgaras Lukoševičius 16 Mar '17

16 Mar '17

Hello, we have configured nginx to work as mail proxy for backend dovecot servers. Dovecot servers behind nginx proxy are showing internal nginx ip address for every client when running 'doveadm who' instead of showing real client IP addresses. Is is possible to configure this setup to show real client IP addresses when running 'doveadm who' on internal dovecot servers or to configure nginx to show which user-ip pairs are proxied to which servers?

1 0

LDAP locking problems - home related
by Ganael Laplanche 16 Mar '17

16 Mar '17

Hi list, # dovecot --version 2.2.13 We use Dovecot LDA and I've discovered lots of messages stating that lock files cannot be written: Mar 16 12:02:03 mailhost dovecot: lda(someuser): Error: file_dotlock_open(/home/sg/someuser/.dovecot.lda-dupes) failed: No such file or directory That user's home directory is fetched from LDAP and does not exist locally on our 'mailhost' machine, so those error messages do make sense; I would like to fix that situation. In our current Dovecot configuration, only mail_location is set: mail_location = maildir:/var/mail/%u I would like to ignore the erroneous 'home' attribute fetched from LDAP and specify a common mail_home, i.e. set: mail_home = /var/mail/%u/home but if I understand correctly, that global mail_home configuration directive would still be overridden by the LDAP 'home' attribute fetched from passdb: [...] pass_attrs = supannAliasLogin=user,userPassword=password,\ homeDirectory=userdb_home,uidNumber=userdb_uid,gidNumber=userdb_gid [...] Can I just remove homeDirectory from pass_attrs to skip fetching 'home' from LDAP and then set the global mail_home ? Also, if that works: We would switch from a situation where a home is set (but wrong) to one where it becomes valid. Can there be any side-effect in that case (apart from fixing locking problems) ? Finally, will mail_home (leaf) directory be created if it does not exist yet (parent directory exists) ? Best regards, -- Ganael Laplanche <ganael.laplanche(a)centralesupelec.fr> Unix Systems Engineer @CentraleSupelec Rennes

1 1

Dovecot 2.2.27 proxy - enforcing per client IP connection limits
by Adi Pircalabu 16 Mar '17

16 Mar '17

Hi, Trying to keep abusive/buggy IMAP clients at bay on a number of Dovecot proxy servers, I've reconfigured them to use "mail_max_userip_connections = 50" in the "protocol imap" section, followed by restarting Dovecot. Yet, I'm still seeing 160+ established connections from a single IP address for the same email account. Am I missing anything? # 2.2.27 (c0f36b0): /etc/dovecot/dovecot.conf # Pigeonhole version 0.4.16 (fed8554) # OS: Linux 2.6.32-642.4.2.el6.x86_64 x86_64 CentOS release 6.8 (Final) auth_cache_negative_ttl = 5 mins auth_cache_size = 16 M auth_cache_ttl = 18 hours default_client_limit = 6120 default_process_limit = 500 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext imapflags notify mbox_write_locks = fcntl namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { sieve = file:~/sieve;active=~/.dovecot.sieve sieve_extensions = +notify +imapflags } protocols = imap pop3 lmtp sieve service auth { client_limit = 6120 } service imap-login { process_limit = 2048 process_min_avail = 20 service_count = 0 vsz_limit = 256 M } service imap { process_limit = 2048 } service managesieve-login { inet_listener sieve { port = 4190 } service_count = 0 vsz_limit = 128 M } service managesieve { process_limit = 1024 } service pop3 { process_limit = 1024 } [...] protocol imap { imap_capability = IMAP4rev1 SASL-IR LOGIN-REFERRALS ID ENABLE IDLE mail_max_userip_connections = 50 } -- Adi Pircalabu

3 6

Postfix Ignoring lmtp, delivering straight to maildir
by Doug Barton 16 Mar '17

16 Mar '17

First I'd like to thank all the developers and contributors to dovecot. I've been using it for many years, and deeply appreciate your fine work. :) dovecot --version 2.2.22 (fe789d2) I have a working installation with postfix and dovecot, and I want to add sieve to it, so I am trying to configure postfix to use lmtp instead of 'virtual' for its delivery service. However it is ignoring that request, and for every message I get "status=sent (delivered to maildir)" and it shows up in my Inbox. On my mail host I have 1 normal user, let's say the username is 'myuser'. I have postfix configured to accept mail for several different domains, and each domain has a lot of different mail usernames (I use this for mailing lists and such). I use the virtual_maps feature of postfix, and have a map file that looks like this: abuse(a)dougbarton.us myuser hostmaster(a)dougbarton.us myuser dougb(a)dougbarton.us myuser ... All of this works great, and mail for all the different usernames and domains gets delivered into my one real user's Maildir, and I can see the mail with my IMAP clients. I've configured sieve in dovecot, and I can see the socket for lmtp in /var/spool/postfix/private/. I can also see the managesieve port in netstat, and I can use a sieve client to connect to it and edit scripts, etc. So according to all the tutorials I've read my next step is this in postfix' main.cf: virtual_transport = lmtp:unix:private/dovecot-lmtp which I did, and postfix restarts with no errors. But, it seems to avoid lmtp altogether, and as I mentioned above it delivers straight to my Maildir Inbox every time. I do have a sieve file, and the ~/dovecot.sieve symlink exists. I created a very simple filter: require ["fileinto", "imap4flags"]; if header :contains "Subject" "test" { fileinto "Junk"; } which my sieve client says is correct syntax. Still no joy. :-/ Any thoughts or suggestions are welcome. (And sorry this is so long, but based on my extensive searches it seems my configuration is a bit unique, so I explained it in some length.) Doug

3 5

Backing Up and Restoring mailboxes
by Jerry 15 Mar '17

15 Mar '17

I am going to be wiping clean my system and doing a complete upgrade. I have dovecot installed. I want to back up the mail system, and then be able to restore it. I thought that I could do this. doveadm -Dv backup -u user(a)example.com maildir:~/DoveBU Then I was going to gunzip that directory and put it onto a USB Drive. Now, after updating the system, I thought that I could just unzip the file from the USB drive. My question is, what command do I run to return the files to the same place they were originally. Assuming the structure was: "/var/mail/vmail/", what would I do? Thanks -- Jerry

1 0

FW: Unable to create needed folders
by Ken Zachreson 15 Mar '17

15 Mar '17

Never mind, I am stupid and did not read all available information. Needed to change permissions on /var/mail/* Thank You, Ken Z -----Original Message----- From: Ken Zachreson Sent: Wednesday, March 15, 2017 10:28 AM To: 'dovecot(a)dovecot.org' <dovecot(a)dovecot.org> Subject: Unable to create needed folders Greetings, The log reports that a process cannot create the needed folders. Please review and tell me what I have done wrong. dovecot 2.0.9 # 2.0.9: /etc/dovecot/dovecot.conf doveconf: Warning: NOTE: You can get a new clean config file with: doveconf -n > dovecot-new.conf doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:85: protocol { ssl_listen } has been replaced by service { inet_listener { address } } # OS: Linux 2.6.32-642.15.1.el6.x86_64 x86_64 CentOS release 6.8 (Final) auth_mechanisms = plain login last_valid_gid = 520 last_valid_uid = 520 mail_location = mbox:~/mail/:INBOX=/var/mail/%u mbox_write_locks = fcntl passdb { args = dovecot driver = pam } protocols = imap service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } } service imap-login { inet_listener imaps { address = * } } service pop3-login { inet_listener pop3s { address = * } } ssl_ca = /etc/pki/tls/certs/gd_bundle-g2-g1.crt ssl_cert = </etc/pki/tls/certs/c1e209e3ca2e1e5.crt ssl_key = </etc/pki/tls/private/gcrcnet.key userdb { driver = passwd } protocol pop3 { pop3_uidl_format = %08Xv%08Xu } ERROR Message from log Mar 15 10:14:03 MultiTronic6 dovecot: imap-login: Login: user=<wifi.adm>, method=LOGIN, rip=xx.xx.xx.xx, lip=yy.yy.yy.yy, mpid=5973, TLS Mar 15 10:14:03 MultiTronic6 dovecot: imap(wifi.adm): Error: chown(/home/wifi.adm/mail/.imap/INBOX, -1, 12(mail)) failed: Operation not permitted (egid=504(wifi.adm), group based on /var/mail/wifi.adm) Mar 15 10:14:03 MultiTronic6 dovecot: imap(wifi.adm): Error: mkdir(/home/wifi.adm/mail/.imap/INBOX) failed: Operation not permitted Mar 15 10:14:03 MultiTronic6 dovecot: imap(wifi.adm): Connection closed bytes=39/423 Thank You, Ken Zachreson IT Manager, Grand Canyon Resort Corp 928-769-2629 928-769-2638 Help Desk

1 0

Unable to create needed folders
by Ken Zachreson 15 Mar '17

15 Mar '17

Greetings, The log reports that a process cannot create the needed folders. Please review and tell me what I have done wrong. dovecot 2.0.9 # 2.0.9: /etc/dovecot/dovecot.conf doveconf: Warning: NOTE: You can get a new clean config file with: doveconf -n > dovecot-new.conf doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:85: protocol { ssl_listen } has been replaced by service { inet_listener { address } } # OS: Linux 2.6.32-642.15.1.el6.x86_64 x86_64 CentOS release 6.8 (Final) auth_mechanisms = plain login last_valid_gid = 520 last_valid_uid = 520 mail_location = mbox:~/mail/:INBOX=/var/mail/%u mbox_write_locks = fcntl passdb { args = dovecot driver = pam } protocols = imap service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } } service imap-login { inet_listener imaps { address = * } } service pop3-login { inet_listener pop3s { address = * } } ssl_ca = /etc/pki/tls/certs/gd_bundle-g2-g1.crt ssl_cert = </etc/pki/tls/certs/c1e209e3ca2e1e5.crt ssl_key = </etc/pki/tls/private/gcrcnet.key userdb { driver = passwd } protocol pop3 { pop3_uidl_format = %08Xv%08Xu } ERROR Message from log Mar 15 10:14:03 MultiTronic6 dovecot: imap-login: Login: user=<wifi.adm>, method=LOGIN, rip=xx.xx.xx.xx, lip=yy.yy.yy.yy, mpid=5973, TLS Mar 15 10:14:03 MultiTronic6 dovecot: imap(wifi.adm): Error: chown(/home/wifi.adm/mail/.imap/INBOX, -1, 12(mail)) failed: Operation not permitted (egid=504(wifi.adm), group based on /var/mail/wifi.adm) Mar 15 10:14:03 MultiTronic6 dovecot: imap(wifi.adm): Error: mkdir(/home/wifi.adm/mail/.imap/INBOX) failed: Operation not permitted Mar 15 10:14:03 MultiTronic6 dovecot: imap(wifi.adm): Connection closed bytes=39/423 Thank You, Ken Zachreson IT Manager, Grand Canyon Resort Corp 928-769-2629 928-769-2638 Help Desk

1 0

autocreate ONLY for new Users
by plataleas 15 Mar '17

15 Mar '17

Hi All We are currently migrating accounts to Dovecot. The existing accounts do have special folders with different names. (i.e. sent, sent-mail) The autocreate-function of "special folders" is useful. However we need this feature ONLY for new users. The existing accounts have a mapping for their own "special folders". There are discussions about this topic on the mailing list: /http://www.dovecot.org/list/dovecot/2014-August/097313.html https://dovecot.org/list/dovecot/2016-May/104296.html/ Did someone manage to implement this ? Are there workarounds? Thanks and regards plataleas

3 6

Custom cache_key for passdb-sql
by Tom Sommer 15 Mar '17

15 Mar '17

The cache_key for the SQL-passdb should be created automatically, but for some reason the service (%s) is not part of the key, and I need it to be I've tried to set a manual cache_key, but that fails: Mar 15 11:54:02 auth: Fatal: sql /etc/dovecot/dovecot-sql.conf cache_key=%s%u%{real_ip}: Can't open configuration file /etc/dovecot/dovecot-sql.conf cache_key=%s%u%{real_ip}: No such file or directory passdb { args = /etc/dovecot/dovecot-sql.conf cache_key=%s%u%{real_ip} driver = sql } Is this not possible? -- Tom

1 0

welcome plugin
by David Mehler 14 Mar '17

14 Mar '17

Hello, If anyone is using the welcome plugin in dovecot 2.2.x to sent a one-time new welcome email to new users can I get a look at your configuration? I'm stuck, I create a user and the welcome action does not execute. If you've got a script to send the mail can I get a look at that as well? Thanks. Dave.

3 2

Users with extra mailbox: namespace/mailbox in userdb lookup?
by MRob 14 Mar '17

14 Mar '17

Hello, We have a need for some users to have an additional folder created and subscribed for them. Is is possible to return an override for the default "namespace inbox" containing the needed mailbox definitions in the userdb lookup for such users? If so, how would the userdb lookup result be formatted? Presumably as just one long string, but how would the setting be named given there can't be a space in it? Can I replace the space with an underscore, e.g. userdb_namespace_inbox = '{ mailbox Drafts { auto=subscribe special_use = \Drafts } mailbox Trash { auto=subscribe special_use = \Trash } }' Or is there some other way to do this?

4 11

strange behaviour of dovecot
by Masaharu Kawada 14 Mar '17

14 Mar '17

Dear dovecot-list, Dovecot gives the below error messages and those errors go away after running 'systemctl restart dovecot'(Restarting dovecot service)', however, the same happens after a while later(like after 300 mails delivered). --- master : Error : service(anvil) : Initial Status notification no received in 30 seconds, killing the process master : Error : service(log) : Initial Status notification no received in 30 seconds, killing the process master : Error : service(ssl-params) : Initial Status notification no received in 30 seconds, killing the process master : Error : service(log) : child 3703 killed with signal 9 --- then the log process is not there so that no mail log gets captured in maillog: --- root 28036 0.0 0.0 19864 1604 ? Ss 11:45 0:00 /usr/sbin/dovecot -F dovecot 28074 0.0 0.0 9312 1000 ? S 11:46 0:00 dovecot/anvil root 28075 0.0 0.0 12324 2084 ? S 11:46 0:00 dovecot/config --- Does this have something to do with any limitation in dovecot configuration? If anyone in the list ever has similar or same experience, please give me a clue that shows where to look at from here. Thanks, -- Masaharu Kawada

2 2

Solr 6.4.2
by Daniel Miller 13 Mar '17

13 Mar '17

For those trying Solr - version 6.4.2 fixed a number of bugs in the 6.4.x series. Speed is incredible. If you haven't tried it - I strongly recommend it! And, using the included installation script (with Solr) combined with my schema - installation was painless. I'm now running in single core mode without issues (running in cloud mode with a single core seemed silly anyway). -- Daniel

1 0

Re: First time setting up Director Woes
by Jesse C. Smillie 13 Mar '17

13 Mar '17

Working again. Explains a lot actually. Inital box I was experimenting on PAM was already setup and had worked. That error I got caught up in was with SSSD and PAM wasn't working. Fixing the error shot myself in the foot in other ways. Thank you! -Jesse C. Smillie On 3/13/17 4:38 PM, Aki Tuomi wrote: >> On March 13, 2017 at 10:21 PM "Jesse C. Smillie" <jsmillie(a)gatewayk12.org> wrote: >> >> >> I'm trying to setup our first director server. Trying to keep the >> initial config simple really as just maybe a proof of concept and its >> got me pulling my hair out today. Initially I just tried to convert one >> of my already running IMAP servers to be a director just to see if I >> could do it. I modified the configs as it appeared they needed based on: >> >> https://wiki2.dovecot.org/Director >> http://wiki2.dovecot.org/PasswordDatabase/ExtraFields/Proxy >> >> But it didn't work. Kept serving files locally instead of proxing off >> to the servers listed. > Remove this: > >> passdb { >> driver = pam >> } > Aki

1 0

First time setting up Director Woes
by Jesse C. Smillie 13 Mar '17

13 Mar '17

I'm trying to setup our first director server. Trying to keep the initial config simple really as just maybe a proof of concept and its got me pulling my hair out today. Initially I just tried to convert one of my already running IMAP servers to be a director just to see if I could do it. I modified the configs as it appeared they needed based on: https://wiki2.dovecot.org/Director http://wiki2.dovecot.org/PasswordDatabase/ExtraFields/Proxy But it didn't work. Kept serving files locally instead of proxing off to the servers listed. -----------------------------------------------------------------------------------------------==== Mar 13 15:58:27 fugitoid dovecot: imap-login: Login: user=<makaveli>, method=PLAIN, rip=10.0.15.114, lip=10.1.12.221, mpid=3022, TLS, session=<YCCCIqJKmMIKAA9y> Mar 13 15:58:27 fugitoid dovecot: imap(makaveli): Error: User initialization failed: Namespace '': mkdir(/home/makaveli/Maildir) failed: Permission denied (euid=2605(makaveli) egid=1100(<unknown>) missing +w perm: /home, dir owned by 0:0 mode=0755) Mar 13 15:58:27 fugitoid dovecot: imap: Error: Invalid user settings. Refer to server log for more information. Thinking it was just something with that box (still running Dovecot 2.2.10 as well) I moved on to setup a new Centos7 server and go through the setup again and initially it was working for a few hours. -----------------------------------------------------------------------------------------------==== Mar 13 12:19:03 fugitoid dovecot: imap-login: proxy(makaveli): started proxying to 10.1.12.228:993: user=<makaveli>, method=PLAIN, rip=10.0.15.114, lip=10.1.12.221, TLS, session=<CzfaEZ9KXgAKAA9y> Then at some point I got side tracked by a pam error message and when I came back from working that out Dovecot was trying to authenticate users locally again. I really feel like I'm missing something here, but for the life of me I can't figure it out. Any ideas would be welcome. Thanks. # 2.2.28 (bed8434): /etc/dovecot/dovecot.conf # OS: Linux 3.10.0-514.10.2.el7.x86_64 x86_64 CentOS Linux release 7.3.1611 (Core) auth_mechanisms = plain login default_client_limit = 1024 director_mail_servers = 10.1.12.229 10.1.12.228 10.1.12.225 director_servers = 10.1.12.221:9090 mail_fsync = always mail_nfs_storage = yes mbox_write_locks = fcntl namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { driver = pam } passdb { args = proxy=y nopassword=y ssl=any-cert driver = static } protocols = imap service director { fifo_listener login/proxy-notify { mode = 0666 } inet_listener { port = 9090 } unix_listener director-userdb { mode = 0600 } unix_listener login/director { mode = 0666 } } service imap-login { executable = imap-login director inet_listener imaps { port = 993 ssl = yes } } ssl = required ssl_ca = </etc/GoDaddy_SSL/gd_bundle.crt ssl_cert = </etc/GoDaddy_SSL/gatewayk12.cert ssl_cipher_list = ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256:kEDH+AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:DHE-RSA-AES256-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:AES:CAMELLIA:DES-CBC3-SHA:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!MD5:!PSK:!aECDH:!EDH-DSS-DES-CBC3-SHA:!EDH-RSA-DES-CBC3-SHA:!KRB5-DES-CBC3-SHA ssl_dh_parameters_length = 2048 ssl_key = # hidden, use -P to show it ssl_protocols = TLSv1 TLSv1.1 TLSv1.2 userdb { driver = passwd }

2 1

change mdbox rotation size?
by Dave McGuire 13 Mar '17

13 Mar '17

Hey folks. Is it possible/advisable to change the mdbox rotation size on an operational mdbox spool? If so, is there any way to "repackage" (for the lack of a better term) an existing mdbox spool to a different rotation size? Thanks, -Dave -- Dave McGuire, AK4HZ New Kensington, PA

1 0

Dict protocol changes string
by Nagy, Attila 13 Mar '17

13 Mar '17

Hi, I use pass and userdb with dict protocol in a similar way: key passdb { key = passdb^MAuth-User: %u^MAuth-Pass: %w^MAuth-Protocol: %s^MClient-IP: %r format = json } (^M is an \r character, inserted with vi CTRL-v + enter) Until 2.2.24 this has worked, but 2.2.25 seems to convert that ASCII 13 into an ASCII 1 and an "r". Python printout from what I get with 2.2.25: 'Lshared/passdb\x01rAuth-User: user\x01rAuth-Pass: pass\x01rAuth-Protocol: pop3\x01rClient-IP: 1.2.3.4' Is this change intentional? Why?

2 4

dovecot: master: Dovecot v2.2.22 (fe789d2) starting up for imap, pop3 (core dumps disabled)
by Basdove 13 Mar '17

13 Mar '17

Hi. Always the below log appraring log under /var/log/mail.log Is this right or How to resolve it. Ubuntu 16.04.2 LTS server edition Mar 13 06:13:20 home dovecot: master: Dovecot v2.2.22 (fe789d2) starting up for imap, pop3 (core dumps disabled) Mar 13 06:13:30 home postfix/master[1495]: daemon started -- version 3.1.0, configuration /etc/postfix dovecot -n output -------------------------------------------------------------------- # 2.2.22 (fe789d2): /etc/dovecot/dovecot.conf # Pigeonhole version 0.4.13 (7b14904) # OS: Linux 4.4.0-64-generic x86_64 Ubuntu 16.04.2 LTS auth_mechanisms = plain login mail_location = mbox:~/mail:INBOX=/var/mail/%u mail_privileged_group = mail namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { driver = pam } protocols = " imap pop3" service auth-worker { user = root } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } } ssl_ca = >/etc/ssl/certs/01.pem ssl_cert = </etc/ssl/certs/cacert.pem ssl_key = </etc/ssl/private/cakey.pem ssl_key_password = # hidden, use -P to show it ssl_protocols = TLSv1 ssl_verify_client_cert = yes userdb { driver = passwd } ---------------------------------------------------------- Thanhs & Regards Baskaranand

2 1

I’m slightly shocked
by dovecot 10 Mar '17

10 Mar '17

Hey! Just take a look at that crazy stuff, I'm slightly shocked! Here it is http://web.wacinema.com/6869 Yours, dovecot

1 0

virtual all mails folder in dovecot
by Rahul Singh Badyal 10 Mar '17

10 Mar '17

I have Centos 7 mail server installed with dovecot and postfix with MariaDB. I am trying to add a virtual All Mails folder for every user so that they can have all mails such as inbox, sent in a single folder, something like gmail. Please help me for this. *Regards,* *Rahul*

2 1

(no subject)
by Rahul Singh Badyal 10 Mar '17

10 Mar '17

I have Centos 7 mail server installed with dovecot and postfix with MariaDB. I am trying to add a virtual All Mails folder for every user so that they can have all mails such as inbox, sent in a single folder, something like gmail. Please help me for this. *Regards,* *Rahul*

1 0

new article
by dovecot 10 Mar '17

10 Mar '17

Hi, There is an article I've written recently and I wanted to hear your thoughts about it, please read it here http://example.wowcinema.com/6f6e Best regards, dovecot

1 0

v2.2.28 released
by Timo Sirainen 10 Mar '17

10 Mar '17

http://dovecot.org/releases/2.2/dovecot-2.2.28.tar.gz http://dovecot.org/releases/2.2/dovecot-2.2.28.tar.gz.sig * director: "doveadm director move" to same host now refreshes user's timeout. This allows keeping user constantly in the same backend by just periodically moving the user there. * When new mailbox is created, use initially INBOX's dovecot.index.cache caching decisions. * Expunging mails writes GUID to dovecot.index.log now only if the GUID is quickly available from index/cache. * pop3c: Increase timeout for PASS command to 5 minutes. * Mail access errors are no longer ignored when searching or sorting. With IMAP the untagged SEARCH/SORT reply is still sent the same as before, but NO reply is returned instead of OK. + Make dovecot.list.index's filename configurable. This is needed when there are multiple namespaces pointing to the same mail root (e.g. lazy_expunge namespace for mdbox). + Add size.virtual to dovecot.index when folder vsizes are accessed (e.g. quota=count). This is mainly a workaround to avoid slow quota recalculation performance when message sizes get lost from dovecot.index.cache due to corruption or some other reason. + auth: Support OAUTHBEARER and XOAUTH2 mechanisms. Also support them in lib-dsasl for client side. + auth: Support filtering by SASL mechanism: passdb { mechanisms } + Shrink the mail processes' memory usage by not storing settings duplicated unnecessarily many times. + imap: Add imap_fetch_failure setting to control what happens when FETCH fails for some mails (see example-config). + imap: Include info about last command in disconnection log line. + imap: Created new SEARCH=X-MIMEPART extension. It's currently not advertised by default, since it's not fully implemented. + fts-solr: Add support for basic authentication. + Cassandra: Support automatically retrying failed queries if execution_retry_interval and execution_retry_times are set. + doveadm: Added "mailbox path" command. + mail_log plugin: If plugin { mail_log_cached_only=yes }, log the wanted fields only if it doesn't require opening the email. + mail_vsize_bg_after_count setting added (see example-config). + mail_sort_max_read_count setting added (see example-config). + pop3c: Added pop3c_features=no-pipelining setting to prevent using PIPELINING extension even though it's advertised. - Index files: day_first_uid wasn't updated correctly since v2.2.26. This caused dovecot.index.cache to be non-optimal. - imap: SEARCH/SORT may have assert-crashed in client_check_command_hangs - imap: FETCH X-MAILBOX may have assert-crashed in virtual mailboxes. - imap: Running time in tagged command reply was often wrongly 0. - search: Using NOT n:* or NOT UID n:* wasn't handled correctly - director: doveadm director kick was broken - director: Fix crash when using director_flush_socket - director: Fix some bugs when moving users between backends - imapc: Various error handling fixes and improvements - master: doveadm process status output had a lot of duplicates. - autoexpunge: If mailbox's rename timestamp is newer than mail's save-timestamp, use it instead. This is useful when autoexpunging e.g. Trash/* and an entire mailbox is deleted by renaming it under Trash to prevent it from being autoexpunged too early. - autoexpunge: Multiple processes may have been trying to expunge the same mails simultaneously. This was problematic especially with lazy_expunge plugin. - auth: %{passdb:*} was empty in auth-worker processes - auth-policy: hashed_password was always sent empty. - dict-sql: Merge multiple UPDATEs to a single statement if possible. - fts-solr: Escape {} chars when sending queries - fts: fts_autoindex_exclude = \Special-use caused crashes - doveadm-server: Fix leaks and other problems when process is reused for multiple requests (service_count != 1) - sdbox: Fix assert-crash on mailbox create race - lda/lmtp: deliver_log_format values weren't entirely correct if Sieve was used. especially %{storage_id} was broken. - lmtp_user_concurrency_limit didn't work if userdb changed username

6 7

Maildirsize not updated
by chaouche yacine 08 Mar '17

08 Mar '17

Hello dovecot Problem : maildirsize and dovecot quota get have different values dovecot version : 2.2.13 happens with : some mailboxes This issue happens only to some mailboxes and only for a specific period of time until maildirsize gets updated by something (not me). I can't reproduce this now because it happened this morning and now its 2 PM and the problem is gone (maildirsize was updated). Anybody experienced the same situation ? -- Yassine.

3 6

iOS Mail app and rapid authenticate / disconnect on Dovecot proxy
by Robert Giles 07 Mar '17

07 Mar '17

Hi folks, I have a handful of iOS 10.2.1 Mail app IMAP clients that intermittently break into this unexplained authenticate-then-immediately-disconnect behavior when connecting to a RHEL7 Dovecot (dovecot-2.2.10-7.el7) proxy, providing proxied connections to a backend Panda/UW-IMAP server. From talking to the users, the activity would appear to be spontaneous (ie: not caused by user interaction with the device). The behavior doesn't seem to have any observable implications for the end user, other than momentarily hitting the Dovecot process_limit (which, if not raised to a rather large number, disrupts new IMAP proxy connections momentarily). I reckon this is not an issue with Dovecot, but I'm curious to know if other folks have observed this behavior when dealing with iOS Mail app clients? The log entries look like this: iOS 10 device = 172.16.0.1 RHEL7 Dovecot proxy host = 192.168.0.1 ("proxyhost") Panda/UW-IMAP target = panda.imap.tld Mar 6 12:11:00 proxyhost dovecot: imap-login: proxy(jdoe): started proxying to panda.imap.tld:993: user=<jdoe>, method=PLAIN, rip=172.16.0.1, lip=192.168.0.1, TLS, session=<VvzqehVKhwBCol00> Mar 6 12:11:00 proxyhost dovecot: imap-login: proxy(jdoe): disconnecting 172.16.0.1 (Disconnected by client): user=<jdoe>, method=PLAIN, rip=172.16.0.1, lip=192.168.0.1, TLS: Disconnected, session=<VvzqehVKhwBCol00> Mar 6 12:11:01 proxyhost dovecot: imap-login: proxy(jdoe): started proxying to panda.imap.tld:993: user=<jdoe>, method=PLAIN, rip=172.16.0.1, lip=192.168.0.1, TLS, session=<jaXxehVKiABCol00> Mar 6 12:11:01 proxyhost dovecot: imap-login: proxy(jdoe): disconnecting 172.16.0.1 (Disconnected by server): user=<jdoe>, method=PLAIN, rip=172.16.0.1, lip=192.168.0.1, TLS, session=<jaXxehVKiABCol00> Mar 6 12:11:01 proxyhost dovecot: imap-login: proxy(jdoe): started proxying to panda.imap.tld:993: user=<jdoe>, method=PLAIN, rip=172.16.0.1, lip=192.168.0.1, TLS, session=<RmX4ehVKiQBCol00> Mar 6 12:11:01 proxyhost dovecot: imap-login: proxy(jdoe): disconnecting 172.16.0.1 (Disconnected by server): user=<jdoe>, method=PLAIN, rip=172.16.0.1, lip=192.168.0.1, TLS, session=<RmX4ehVKiQBCol00> Mar 6 12:11:02 proxyhost dovecot: imap-login: proxy(jdoe): started proxying to panda.imap.tld:993: user=<jdoe>, method=PLAIN, rip=172.16.0.1, lip=192.168.0.1, TLS, session=<inYBexVKigBCol00> Mar 6 12:11:02 proxyhost dovecot: imap-login: proxy(jdoe): disconnecting 172.16.0.1 (Disconnected by server): user=<jdoe>, method=PLAIN, rip=172.16.0.1, lip=192.168.0.1, TLS, session=<inYBexVKigBCol00> Mar 6 12:11:02 proxyhost dovecot: imap-login: proxy(jdoe): started proxying to panda.imap.tld:993: user=<jdoe>, method=PLAIN, rip=172.16.0.1, lip=192.168.0.1, TLS, session=<GwAJexVKiwBCol00> Mar 6 12:11:02 proxyhost dovecot: imap-login: proxy(jdoe): disconnecting 172.16.0.1 (Disconnected by server): user=<jdoe>, method=PLAIN, rip=172.16.0.1, lip=192.168.0.1, TLS, session=<GwAJexVKiwBCol00> Mar 6 12:11:03 proxyhost dovecot: imap-login: proxy(jdoe): started proxying to panda.imap.tld:993: user=<jdoe>, method=PLAIN, rip=172.16.0.1, lip=192.168.0.1, TLS, session=<asUPexVKswBCol00> Mar 6 12:11:03 proxyhost dovecot: imap-login: proxy(jdoe): disconnecting 172.16.0.1 (Disconnected by server): user=<jdoe>, method=PLAIN, rip=172.16.0.1, lip=192.168.0.1, TLS, session=<asUPexVKswBCol00> Mar 6 12:11:03 proxyhost dovecot: imap-login: proxy(jdoe): started proxying to panda.imap.tld:993: user=<jdoe>, method=PLAIN, rip=172.16.0.1, lip=192.168.0.1, TLS, session=<n9YYexVKjQBCol00> Mar 6 12:11:04 proxyhost dovecot: imap-login: proxy(jdoe): disconnecting 172.16.0.1 (Disconnected by server): user=<jdoe>, method=PLAIN, rip=172.16.0.1, lip=192.168.0.1, TLS, session=<n9YYexVKjQBCol00> ...and on and on, usually until the 'service imap-login' process_limit is reached. You could naturally apply some iptables rate-limiting to avoid hitting process_limit, but it'd be nice to have the iOS client simply behave properly instead. dovecot -n: --- # 2.2.10: /etc/dovecot/dovecot.conf # OS: Linux 3.10.0-514.6.2.el7.x86_64 x86_64 Red Hat Enterprise Linux Server release 7.3 (Maipo) auth_mechanisms = plain login auth_verbose = yes first_valid_uid = 1000 imap_capability = +I18NLEVEL=1 mbox_write_locks = fcntl passdb { args = nopassword=y default_fields = proxy=y ssl=any-cert host=panda.imap.tld driver = static } protocols = imap pop3 service imap-login { process_limit = 400-ish at the moment process_min_avail = 2 } service pop3-login { inet_listener pop3s { port = 995 ssl = yes } } ssl = required ssl_ca = </etc/pki/ca-trust/extracted/pem/tls-ca-bundle.pem ssl_cert = <proxyhost.crt ssl_dh_parameters_length = 2048 ssl_key = <proxyhost.key ssl_protocols = !SSLv3 !SSLv3 ssl_require_crl = no userdb { driver = static } --- Thanks for any insight out there. Robert Giles

1 0

SiS hashes file ?
by Sai Kiran Gummaraj 07 Mar '17

07 Mar '17

Hello, In mdbox SiS POSIX mail box setting - There are hard-links under - <mail_attachment_dir>/ha/sh/<hash>-<guid-1> <mail_attachment_dir>/ha/sh/<hash>-<guid-2> Why is a copy of the file kept under hashes/<hash> ? -- Regards, Sai Kiran

1 0

Transitioning away from mail_location = maildir:~
by Chris Stankevitz 06 Mar '17

06 Mar '17

Hi, I have been using this setup for years: mail_home = /var/mail/vhosts/%d/%n mail_location = maildir:~ I have since learned that mail_home and mail_location should be different. I plan to use this: mail_home = /var/mail/vhosts/%d/%n mail_location = maildir:~/mail I would like the transition to be transparent for my email clients. I don't want mail/directories/sieve_scripts to disappear. 1. Should I manually create the maildir:~/mail directories? 2. Should I move files from /var/mail/vhosts/%d/%n into maildir:~/mail? Which files? (In other words: which files are "home directory" files and which files are "mail files"?) Thank you, Chris Example home directory: drwx------ . drwxr-xr-x .. drwx------ .Archives drwx------ .Archives.2016 drwx------ .Archives.2017 drwx------ .Drafts drwx------ .Junk drwx------ .Notes drwx------ .Sent drwx------ .Sent drwx------ .Trash drwx------ .work drwx------ .home drwx------ .todo lrwx------ .dovecot.sieve -rw------- .dovecot.sieve.log -rw------- .dovecot.sieve.log.0 -rw------- .dovecot.svbin drwx------ cur -rw------- dovecot-keywords -rw------- dovecot-uidlist -rw------- dovecot-uidvalidity -r--r--r-- dovecot-uidvalidity.55411048 -rw------- dovecot.index -rw------- dovecot.index.cache -rw------- dovecot.index.log -rw------- dovecot.mailbox.log drwx------ new drwx------ sieve -rw------- subscriptions drwx------ tmp $ dovecot -n # 2.2.27 (c0f36b0): /usr/local/etc/dovecot/dovecot.conf # Pigeonhole version 0.4.16 (fed8554) # OS: FreeBSD 10.3-RELEASE-p11 amd64 lmtp_save_to_detail_mailbox = yes mail_gid = 1002 mail_home = /var/mail/vhosts/%d/%n mail_location = maildir:~ mail_privileged_group = vpostfix mail_uid = 1002 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = scheme=CRYPT username_format=%u /usr/local/etc/dovecot/users driver = passwd-file } plugin { recipient_delimiter = - sieve = file:~/sieve;active=~/.dovecot.sieve } protocols = imap pop3 lmtp sieve recipient_delimiter = - service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } unix_listener auth-userdb { group = postfix mode = 0600 user = postfix } } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0666 user = postfix } } service managesieve-login { inet_listener sieve { port = 4190 } } ssl_cert = xxx ssl_key = xxx userdb { args = username_format=%u /usr/local/etc/dovecot/users driver = passwd-file } protocol lmtp { mail_plugins = " sieve" postmaster_address = xxx } protocol lda { mail_plugins = " sieve" }

5 6

quota-warning: possible to have size also?
by dovecot＠avv.solutions 06 Mar '17

06 Mar '17

Hello Community, My dovecot setup works fine with quotas and quota-warning. I have a questions though: when running the warning script, the example foundis it possible to pass the *quota size *as argument also? This would be useful with per-user quota. e.g. /some/script xx% username *xxxbytes* (order is not relevant of course) Thank you for your help. Cheers

4 4

dovecot 2.2.x listening on multiple interfaces
by David Mehler 06 Mar '17

06 Mar '17

Hello, I'm wondering if it's possible to get dovecot to listen on multiple interfaces without designating * for everything? I've got a machine with three interfaces going to three different networks. I'm not wanting to let dovecot listen on all interfaces * just two of them, standard ports. Is this doable? Thanks. Dave.

2 1

Upgrade from 2.0. to 2.2
by Jakob Curdes 06 Mar '17

06 Mar '17

Hello, we have a centos 6 server running dovecot 2.0 provided with the OS, currently 2.0.9. We would like to upgrade to the 2.2.19 package provided by the mailserver.guru repo. I read the upgrading docs for 2.1 and 2.2 and found the following issues: 2.0 - 2.1: - define namespace inbox or delete 15-mailboxes.conf (we do not "care about special use mailboxes") - plugins and UTF-8: we do not use one of the listed plugins - to allow mixed usernames set auth_username_format to "nothing" - solr backend: not used in our setup - expire plugin: not used - dsync: not used 2.1 - 2.2 - fts-solr: not used (?) - autocreate: not used - other changes: trivial or not used Are there other things that we need to observe? Is a direct update from 2.0.9 to 2.2.19 feasible with the above precautions or do we need to put in a 2.1 version in between? Thank you for hints, Jakob

4 6

welcome plugin
by David Mehler 06 Mar '17

06 Mar '17

Hello, Is anyone using the welcome plugin? I'm trying to utilize it to send a message when a user first logs in to the system, containing important information for them to know. The plugin loads, I don't have a configuration problem, but the message never gets sent. What can I provide to more easily troubleshoot this? Thanks. Dave.

3 5

[enhancement] fts-solr low performance
by azurit＠pobox.sk 05 Mar '17

05 Mar '17

Hi, we have activated fts-solr about a week ago and immediately started to experience really *low* performance with MOVE and EXPUNGE commands. After several days of googling, tcpdumping and straceing i was able to find and resolve the problem. We are using Dovecot 2.2.27 from Debian Jessie (jessie-backports), which is doing a soft commit in solr after every MOVE or EXPUNGE command - this behavior cannot be, currently, changed. The problem is that this was causing every MOVE/EXPUNGE to take about 6 seconds to complete. The problem appears to be in very old version of Solr - 3.6.2 (!!). This is the only version which is shipped with current (Jessie) and also next (Stretch) version of Debian, don't ask my why, i don't understand it either. Solr versions below 4.0 are NOT supporting soft commits, so all commits are hard and this was the problem. Finally, i decided to patch our Dovecot to not send a commit at all and everything started to be super fast. I'm doing hard commits every minute via cron so the only consequence of this is that you cannot search for messages delivered before less then a minute (which you, usually, don't need to do anyway). While googling i also find out that Solr supports autoCommit function (and from version 4.0 also autoSoftCommit), so there's no reason for Dovecot to handle this on it's own (and potentially doing hundreds or thousands of soft commits every second) - you can just set Solr to, for example, do autoSoftCommit every second and autoCommit every minute: https://cwiki.apache.org/confluence/display/solr/UpdateHandlers+in+SolrConf… Also this wiki page should be updated with warning about old versoins of Solr not supporting soft commits (you could also mention the auto[Soft]Commit function): http://wiki2.dovecot.org/Plugins/FTS/Solr I suggest to allow completely disable Solr commits in Dovecot by configuration, so people like me can handle this easily. What do you think? azur

1 0

fts_solr and connection via https://
by Jan Vonde 04 Mar '17

04 Mar '17

Hi, I am trying to get fts_solr working and my index server is available via HTTPS only. Dovecot is running on a Debian Jessie system and the Solr server has a letsencrypt certificate. My dovecot version is: 2.2.devel (a9ed8ae) The current setup is: 10-mail.conf: mail_plugins = fts fts_solr 90-fts.conf: plugin { fts = solr fts_autoindex = yes fts_solr = url=https://foo.example.com/solr/dovecot/ } When I try to index the mailboxes I am getting error messages like this: doveadm(user@host): Error: fts_solr: Lookup failed: 9002 Couldn't initialize SSL context: Can't verify remote server certs without trusted CAs (ssl_client_ca_* settings) doveadm(user@host): Error: Mailbox INBOX: Status lookup failed: Internal error occurred. Refer to server log for more information. [2017-01-22 09:52:38] Segmentation fault Contacting the index server via curl on the command line on the same host works, it returns HTTP 200: user@host ~ $ curl -s -o /dev/null -w "%{http_code}" https://foo.example.com/solr/ 200 user@host ~ $ Currently I have the following ssl related settings: user@host ~ $ doveconf -n -P | grep -i ssl ssl_cert = </etc/ssl/certs/mail.example.org.crt ssl_cipher_list = ALL:!LOW:!SSLv2:ALL:!aNULL:!ADH:!eNULL:!EXP:RC4+RSA:+HIGH:+MEDIUM ssl_key = </etc/ssl/private/mail.example.org.key ssl_protocols = !SSLv2 !SSLv3 I tried adding the following settings but that didn't help: ssl_ca = < /etc/ssl/certs/ca-certificates.crt ssl_client_ca_dir = /etc/ssl/certs Can you give me a hint how I can get the ssl certificate accepted? Thanks in advance and have a nice day, Jan :-)

2 10

mdbox Inconsistency in map index
by bOnK 04 Mar '17

04 Mar '17

After a (power)crash two accounts have been corrupted. I tried to rescue things by running force-resync multiple times, but that didn't work out. Searching the archives, I found a recent suggestion (by Timo) to delete the index files, but I'm not sure which files to delete and what the consequences will be. When I deleted ``storage/dovecot.map.index'' in an unimportant account of my own, things only grew worse and I decided to delete the account and start fresh... Something I obviously don't want to do with the other account as it belongs to a client with about 2.5G mails (856 m.* files), which we don't want to lose. I have observed the following behavior in the logs: When a new mail arrives: (The second line below is always the same, however there's no mail with uid 12819 according to doveadm search uid 12819) Mar 04 11:43:28 lda(user): Warning: mdbox /var/mail/user/storage: Inconsistency in map index (117,1060 != 117,1883660) Mar 04 11:43:28 lda(user): Error: Log synchronization error at seq=117,offset=1546660 for /var/mail/user/storage/dovecot.map.index: Extension record inc drops number below zero (uid=12819, diff=-1, orig=0) Mar 04 11:43:28 lda(user): Warning: fscking index file /var/mail/user/storage/dovecot.map.index Mar 04 11:43:28 lda(user): Info: msgid=<d760229d563e99dc787acd0746b18b31(a)feedback.1dayfly.net>: saved mail to INBOX Mar 04 11:43:28 lda(user): Warning: mdbox /var/mail/user/storage: Inconsistency in map index (117,1060 != 117,1883784) Mar 04 11:43:28 lda(user): Warning: fscking index file /var/mail/user/storage/dovecot.map.index Mar 04 11:43:28 lda(user): Warning: mdbox /var/mail/user/storage: rebuilding indexes Mar 04 11:43:28 lda(user): Warning: fscking index file /var/mail/user/storage/dovecot.map.index Mar 04 11:43:28 imap(user): Error: /var/mail/user/mailboxes/INBOX/dbox-Mails/dovecot.index reset, view is now inconsistent Mar 04 11:43:28 imap(user): Info: IMAP session state is inconsistent, please relogin. in=2011 out=108358 deleted=0 expunged=0 trashed=0 When user logs in next (might be from another box/MUA) Mar 04 11:44:36 imap-login: Info: Login: user=<user>, method=PLAIN, rip=82.95.XX.XX, lip=37.97.XX.XX, mpid=14884, TLS, session=<VfvML+ZJuO9SX18R> Mar 04 11:44:37 imap(user): Warning: mdbox /var/mail/user/storage: Inconsistency in map index (117,1060 != 117,1884336) Mar 04 11:44:37 imap(user): Warning: fscking index file /var/mail/user/storage/dovecot.map.index Mar 04 11:44:37 imap(user): Warning: mdbox /var/mail/user/storage: rebuilding indexes Mar 04 11:44:37 imap(user): Error: /var/mail/user/mailboxes/INBOX/dbox-Mails/dovecot.index reset, view is now inconsistent Mar 04 11:44:37 imap(user): Info: IMAP session state is inconsistent, please relogin. in=331 out=178391 deleted=0 expunged=0 trashed=0 Mar 04 11:44:37 imap(user): Warning: mdbox /var/mail/user/storage: Inconsistency in map index (117,1060 != 117,1884396) Mar 04 11:44:37 imap(user): Warning: fscking index file /var/mail/user/storage/dovecot.map.index Mar 04 11:44:37 imap(user): Warning: fscking index file /var/mail/user/storage/dovecot.map.index Mar 04 11:44:37 imap-login: Info: Login: user=<user>, method=PLAIN, rip=82.95.XX.XX, lip=37.97.XX.XX, mpid=14886, TLS, session=<AUTbL+ZJuu9SX18R> Besides the nuisance of getting kicked of every time a new mail arrives, user cannot delete mails (as in: move to Trash). TL;DR: which files to delete and what will be the consequences? -- b.

1 0

letsencrypt
by David Mehler 04 Mar '17

04 Mar '17

Hello, I know some users here are using letsencrypt for their CA. If this is to off topic write me privately. I'm wanting letsencrypt to take over as my CA, replacing existing self signed certificates. I've got web working, a certificate for https sites and one for webmail as they have different names. What I'm now wanting to do is get letsencrypt going for my email setup, the smtp handled by postfix, but mail, and imap I believe are handled by dovecot. With the web it was easy just let apache serve the token that letsencrypt needed and I got certificates. How do I do this with regards email? I hope that's clear. Any help appreciated. Thanks. Dave.

8 9

Re: letsencrypt
by Joseph Tam 03 Mar '17

03 Mar '17

> Thanks. Is there another way of doing this? I've got a web server > running on 80 and 443. Are there any other options? I'm getting this list in digest mode, so it's possible by the time this gets to you, I will have repeated someone else' suggestion. In this situation, where your dovecot server lives on the same host as a web server (wembail?), and this web server is already going certificate renewal, then just change the certificate to use SNI extension and add all LS services that live on this host. (This does not count as a cert renewal, but a new cert). (E.g. if you are using a certbot to get a certifiticate for "webmail.mydomain", then add "pop3.mydomain", "imap.mydomain" and "smtp.mydomain" to the certificate.) Your web server will have to virtually host those domains for the purposes of mapping the token pickup folder. Then you can use the same certificate for all TLS services hosted on that server. Joseph Tam <jtam.home(a)gmail.com>

1 0

Re: letsencrypt
by Joseph Tam 03 Mar '17

03 Mar '17

David Mehler <dave.mehler(a)gmail.com> writes: > I'm wanting letsencrypt to take over as my CA, replacing existing self > signed certificates. I've got web working, a certificate for https > sites and one for webmail as they have different names. What I'm now > wanting to do is get letsencrypt going for my email setup, the smtp > handled by postfix, but mail, and imap I believe are handled by > dovecot. SMTP is handled by postfix, imap/pop is handled by dovecot. > With the web it was easy just let apache serve the token that > letsencrypt needed and I got certificates. How do I do this with > regards email? You can do the DNS challenge method if your server has the ability to update DNS entries, or you can use certbot clients in standalone-mode that will act as a simple web server just long enough to serve out the token to complete the authentication. Joseph Tam <jtam.home(a)gmail.com>

1 0

Director+NFS Experiences
by Mark Moseley 03 Mar '17

03 Mar '17

As someone who is about to begin the process of moving from maildir to mdbox on NFS (and therefore just about to start the 'director-ization' of everything) for ~6.5m mailboxes, I'm curious if anyone can share any experiences with it. The list is surprisingly quiet about this subject, and articles on google are mainly just about setting director up. I've yet to stumble across an article about someone's experiences with it. * How big of a director cluster do you use? I'm going to have millions of mailboxes behind 10 directors. I'm guessing that's plenty. It's actually split over two datacenters. In the larger, we've got about 200k connections currently, so in a perfectly-balanced world, each director would have 20k connections on it. I'm guessing that's child's play. Any good rule of thumb for ratio of 'backend servers::director servers'? In my larger DC, it's about 5::1. * Do you use the perl poolmon script or something else? The perl script was being weird for me, so I rewrote it in python but it basically does the exact same things. * Seen any issues with director? In testing, I managed to wedge things by having my poolmon script running on all the cluster boxes (I think). I've since rewritten it to run *only* on the lowest-numbered director. When it wedged, I had piles (read: hundreds per second) of log entries that said: Feb 12 06:25:03 director: Warning: director(10.1.20.5:9090/right): Host 10.1.17.3 is being updated before previous update had finished (down -> up) - setting to state=up vhosts=0 Feb 12 06:25:03 director: Warning: director(10.1.20.5:9090/right): Host 10.1.17.3 is being updated before previous update had finished (up -> down) - setting to state=down vhosts=0 Feb 12 06:25:03 director: Warning: director(10.1.20.3:9090/left): Host 10.1.17.3 is being updated before previous update had finished (down -> up) - setting to state=up vhosts=0 Feb 12 06:25:03 director: Warning: director(10.1.20.3:9090/left): Host 10.1.17.3 is being updated before previous update had finished (up -> down) - setting to state=down vhosts=0 Because it was in testing, I didn't notice it and it was like this for several days till dovecot was restarted on all the director nodes. I'm not 100% on what happened, but my *guess* is that two boxes tried to update the status of the same backend server in rapid succession. * Assuming you're using NFS, do you still see non-trivial amounts of indexes getting corrupted? * Again, assuming NFS and assuming at least some corrupted indexes, what's your guess for success rate % for dovecot recovering them automatically? And how about success rate % for ones that dovecot wasn't able to do automatically but you had to use doveadm to repair it? Really what I'm trying to figure out is 1) how often sysops will need to manually recover indexes; and 2) how often admins *can't* manually recover indexes? * if you have unrecoverable indexes (and assuming you have snapshots on your NFS server), does grabbing the most recent indexes from the snapshots always work for recovery (obviously, up till the point that the snapshot was taken)? * Any gotchas you've seen anywhere in a director-fied stack? I realize that's a broad question :) * Does one of your director nodes going down cause any issues? E.g. issues with the left and right nodes syncing with each other? Or when the director node comes back up? * Does a backend node going down cause a storm of reconnects? In the time between deploying director and getting mailboxes converted to mdbox, reconnects for us will mean cold local-disk dovecot caches. But hopefully consistent hashing helps with that? * Do you have consistent hashing turned on? I can't think of any reason not to have it turned on, but who knows * Any other configuration knobs (including sysctl) that you needed to futz with, vs the default? I appreciate any feedback!

8 14

Mailbox size in log file
by Sergio Bastian Rodríguez 03 Mar '17

03 Mar '17

Hello Dovecot list. I need that Dovecot log writes mailbox size in all POP / IMAP connections, but I do not know if Dovecot can do that. I have been searching about that with not successful. For example, this is the log of our last email platform, different than Dovecot: 06:48:14 025BEE83 POP3 LOGIN user 'xxx(a)xxx.com' MailboxSize = 61708 Capacity = 2% ...... 06:49:19 025BEE83 POP3 LOGOUT user 'xxx(a)xxx.com' MailboxSize = 14472 Capacity = 0% In this example we can know the mailbox size before and after the connection, and it shows that user has removed or downloaded all messages from server. Now in Dovecot we have no information about that, and I cannot find any plugin which gives this us functionality. Is it possible to have this feature in Dovecot? Thanks for your help. ________________________________ ------------------------------------------------------------------------ Le informamos, como destinatario de este mensaje, que el correo electrónico y las comunicaciones por medio de Internet no permiten asegurar ni garantizar la confidencialidad de los mensajes transmitidos, así como tampoco su integridad o su correcta recepción, por lo que TELECABLE DE ASTURIAS, S.A. no asume responsabilidad alguna por tales circunstancias. Si no consintiese en la utilización del correo electrónico o de las comunicaciones vía Internet le rogamos nos lo comunique y ponga en nuestro conocimiento de manera inmediata. Este mensaje va dirigido, de manera exclusiva, a su destinatario y contiene información confidencial y sujeta al secreto profesional, cuya divulgación no está permitida por la ley. En caso de haber recibido este mensaje por error, le rogamos que, de forma inmediata, nos lo comunique mediante correo electrónico remitido a nuestra atención o a través del teléfono (+ 34) 984191000 y proceda a su eliminación, así como a la de cualquier documento adjunto al mismo. Asimismo, le comunicamos que la distribución, copia o utilización de este mensaje, o de cualquier documento adjunto al mismo, cualquiera que fuera su finalidad, están prohibidas por la ley. ------------------------------------------------------------------------

3 4

Dovecot + SpamAssassin through dovecot-antispam
by Bernard 03 Mar '17

03 Mar '17

Hello, I am new to the list. /Waving at everyone/ I got a basic SpamAssassin working on a Debian setup (w/ debian-spamd user), running as a Postfix transport. I am currently trying to switch it to a dovecot plugin in order to make it interactively work with the email storage (react to mail classification, being able to train it from already received emails, aso.) My problem is now making it able to access my emails. Here is my setup: userdb { driver = static args = uid=<fixed> gid=<fixed> home=/var/mail/vhosts/%d/%n } passdb { driver = passwd-file args = <path to passwords file> } mail_location = maildir:~/mail:LAYOUT=fs mail_privileged_group = vmail Translating into this on the FS: drwxrwsr-x root mail /var/mail/ drwxrws--- root vmail /var/mail/vhosts drwx--S--- vmail vmail /var/mail/vhosts/domain1 drwx--S--- vmail vmail /var/mail/vhosts/domain1/user1 drwx--S--- vmail vmail /var/mail/vhosts/domain1/user2 drwx--S--- vmail vmail /var/mail/vhosts/domain2 drwx--S--- vmail vmail /var/mail/vhosts/domain2/user1 The drwx--S--- access rights are propagated into lower branches/leafs. I am having a hard time understanding what to do, reading http://wiki2.dovecot.org/SharedMailboxes/Permissions, to make all the folders and subsequent files readable by the vmail group too. Based on this documentation, the way dovecot propagate permissions from parent folders is a bit cryptic to me. What needs to be done to achieve that? The idea would be that even if I decided to allocated per-virtual-user a system user for stored files, all the files would still be stored and accessible with the same system group. I understand this would be done with the help of mail_access_groups = vmail, right? FWIW, I am getting inspiration from the following explanations: https://www.christianroessler.net/tech/2015/spamassassin-dovecot-postfix.ht… If I understand correctly, the guy is bypassing the authentication completely with allow_all_users=yes, right? I do not want to do that anyway. I hope what I am trying to achieve is clear enough and that I provided information enough. Would you help me? --- Bernard

4 5

passdb evaluation order
by Angel L. Mateo 03 Mar '17

03 Mar '17

Hello, I could have several password databases in dovecot. And according to http://wiki.dovecot.org/PasswordDatabase these passwdbs could allow or deny users and they could have different result_failure and result_sucess behaviors. So the order in which they are evaluated may be significant. So, how do I define this order? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información y las Comunicaciones Aplicadas (ATICA) http://www.um.es/atica Tfo: 868889150 Fax: 868888337

3 2

Faster way to import Thunderbird pop emails into dovecot imap Maildirs?
by Ian Evans 03 Mar '17

03 Mar '17

Until recently, I was using POP on my desktop and imap to access my email on my phone and laptop. Got tired of not having everything everywhere, so decided to go full imap. Followed the suggestions online and created a new imap account for my site in Thunderbird and copied my pop folders over to the imap ones so that the emails would get uploaded to the dovecot server and Maildir folders. That worked for some smaller folders, but in a couple of folders, I have in excess of 20,000 emails. Thunderbird/Dovecot seems to choke on that, apparently timing out at some point. I've tried doing about 1000 messages at a time, but even that is taking more than an hour and I have to be around for each chunk. I'm sure someone here is going to point me to some eureka moment method of exporting the thunderbird folders to some format, sftp'ing them to the server and importing. Just want to be careful that I don't mess up the current batch of emails on the imap server. Thanks for any suggestions.

3 3

Re: Re: welcome plugin
by Larry Rosenman 03 Mar '17

03 Mar '17

Directory probably needs rx to allow search. On Mar 2, 2017 at 6:52 PM, <David Mehler <dave.mehler(a)gmail.com>> wrote: Hello, Thank you. My configuration is below. It looks like a perm problem, i've set +r on the directory and it is readable. One other thing I noticed when going through the log the testuser logs in, then logs out. Then logs in again, and then gets the error. Any ideas why the two logins? I see this all the time, a log in log out, then another log in log out then the email transaction. Thanks. Dave. # 2.2.28 (bed8434): /usr/local/etc/dovecot/dovecot.conf # Pigeonhole version 0.4.17 (e179378) # OS: FreeBSD 10.3-RELEASE-p11 amd64 ufs auth_default_realm = domain.tld auth_mechanisms = plain login cram-md5 dict { sqlquota = mysql:/usr/local/etc/dovecot/dovecot-dict-sql.conf.ext } first_valid_gid = 999 first_valid_uid = 999 hostname = mail.domain.tld imap_client_workarounds = delay-newmail tb-extra-mailbox-sep tb-lsub-flags last_valid_gid = 999 last_valid_uid = 999 lmtp_rcpt_check_quota = yes mail_gid = vmail mail_home = /home/vmail/%d/%n/home mail_location = maildir:/home/vmail/%d/%n:LAYOUT=fs mail_plugins = acl quota zlib welcome mail_server_admin = mailto:postmaster@domain.tld mail_uid = vmail mailbox_list_index = yes maildir_broken_filename_sizes = yes maildir_empty_new = yes maildir_stat_dirs = yes maildir_very_dirty_syncs = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress tldparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext imapflags notify imapsieve namespace { list = yes location = maildir:/home/vmail/public:LAYOUT=fs prefix = public/ separator = / subscriptions = yes type = public } namespace inbox { hidden = no inbox = yes list = yes location = mailbox Drafts { auto = no special_use = \Drafts } mailbox Sent { auto = subscribe special_use = \Sent } mailbox Spam { auto = subscribe special_use = \Junk } mailbox Trash { auto = no special_use = \Trash } prefix = separator = / subscriptions = yes type = private } passdb { args = /usr/local/etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { imapsieve_mailbox1_before = file:/usr/local/lib/dovecot/sieve/report-spam.sieve imapsieve_mailbox1_causes = COPY imapsieve_mailbox1_name = Spam imapsieve_mailbox2_before = file:/usr/local/lib/dovecot/sieve/report-ham.sieve imapsieve_mailbox2_causes = COPY imapsieve_mailbox2_from = Spam imapsieve_mailbox2_name = * last_login_dict = redis:host=127.0.0.1:port=6379 quota = dict:User quota::proxy::sqlquota quota_grace = 10%% quota_status_nouser = DUNNO quota_status_overquota = 552 5.2.2 Mailbox is full quota_status_success = DUNNO sieve = ~/.dovecot.sieve sieve_before = /usr/local/etc/dovecot/sieve/before.d sieve_extensions = +notify +imapflags sieve_global_extensions = +vnd.dovecot.pipe +vnd.dovecot.execute sieve_pipe_bin_dir = /usr/local/lib/dovecot/sieve sieve_plugins = sieve_imapsieve sieve_extprograms } postmaster_address = postmaster(a)domain.tld protocols = imap service auth-worker { user = vmail } service auth { unix_listener /var/spool/postfix/private/auth { mode = 0666 } unix_listener auth-userdb { mode = 0600 user = vmail } } service dict { unix_listener dict { mode = 0600 user = vmail } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } } service lmtp { unix_listener dovecot-lmtp { group = postfix mode = 0660 user = postfix } } service quota-status { client_limit = 1 executable = quota-status -p postfix inet_listener { address = 127.0.0.1 port = 12345 } } ssl_ca = /etc/ssl/certs/cacert.crt ssl_cert = </etc/ssl/certs/server.crt ssl_cipher_list = EECDH+ECDSA+AESGCM:EECDH+aRSA+AESGCM:EECDH+ECDSA+SHA384:EECDH+ECDSA+SHA256:EECDH+aRSA+SHA384:EECDH+aRSA+SHA256:EECDH+aRSA+RC4:EECDH:EDH+aRSA:!aNULL:!eNULL:!LOW:!3DES:!MD5:!EXP:!PSK:!SRP:!DSS:!RC4 ssl_dh_parameters_length = 2048 ssl_key = # hidden, use -P to show it ssl_options = no_tldpression ssl_prefer_server_ciphers = yes ssl_protocols = !SSLv2 !SSLv3 userdb { args = /usr/local/etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol lmtp { mail_plugins = acl quota zlib welcome sieve } protocol lda { mail_plugins = acl quota zlib welcome quota sieve } protocol imap { mail_plugins = acl quota zlib welcome imap_acl imap_quota imap_sieve imap_zlib last_login } /var/log/maillog: Feb 28 14:52:06 hostname dovecot: imap-login: Login: user=<testuser(a)domain.tld>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=5840, secured, session=<5EXYh5xJesx/AAAB> Feb 28 14:52:06 hostname dovecot: imap(testuser(a)domain.tld): Logged out in=102 out=1373 Feb 28 14:52:06 hostname dovecot: imap-login: Login: user=<testuser(a)domain.tld>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=7724, secured, session=<0nPch5xJMeR/AAAB> Feb 28 14:52:06 hostname dovecot: lda(testuser(a)domain.tld): Error: userdb lookup: connect(/var/run/dovecot/auth-userdb) failed: Permission denied (euid=143(dovecot) egid=143(dovecot) missing +r perm: /var/run/dovecot/auth-userdb, dir owned by 0:0 mode=0755) Feb 28 14:52:06 hostname dovecot: lda: Fatal: Internal error occurred. Refer to server log for more information. Feb 28 14:52:06 hostname dovecot: welcome: Fatal: master: service(welcome): child 8781 returned error 75 Feb 28 14:52:06 hostname dovecot: imap(testuser(a)domain.tld): Logged out in=234 out=1549 On 3/2/17, @lbutlr <kremels(a)kreme.com> wrote: > On 2017-03-02 (16:54 MST), David Mehler <dave.mehler(a)gmail.com> wrote: >> >> Is anyone using the welcome plugin? I'm trying to utilize it to send a >> message when a user first logs in to the system, containing important >> information for them to know. The plugin loads, I don't have a >> configuration problem, but the message never gets sent. > > I would say you DO have a configuration problem if the mail doesn’t get > sent. > >> What can I provide to more easily troubleshoot this? > > I’d start with the settings for the welcome plugin and any logs. > > > -- > Apple broke AppleScripting signatures in Mail.app, so no random signatures. >

1 0

IMAP MOVE command with FTS
by TACHIBANA Masashi 03 Mar '17

03 Mar '17

Hi, I'm using Dovecot 2.2.28 with fts. It seems to work fine almost things. But I found a bug (or my setting problem?) My setting is "fts_autoindex=yes" in /etc/dovecot/conf.d/90-fts.conf Then, I have mailboxes like bellow: a a/lot a/lot/of There are some mails is in "a/lot" folder, then create sub like: a/lot/of/apples And move the mails from "a/lot" to "a/lot/of/apples" by MOVE command. In this case, FTS function fts_backend_xx_update_expunge is called. But fts_backend_xx_update_set_build_key is not called. Another case, follow functions are called and mails will be indexed. fts_backend_xx_update_expunge() fts_backend_xx_update_set_build_key() By the way, in the first case, I tried a command as bellow, then the mails ware indexed correctly: # doveadm index -u user1(a)example.com \* I think MOVE is better way to move mails than COPY+FLAG DEL+EXPUNGE. My settings problem? Any hints? Regards, -- Astro.M

1 0

make check failing in CentOS 6
by Peter Ajamian 02 Mar '17

02 Mar '17

Dovecot builds just fine, but fails the tests in src/lib-index. Note that reverting this commit fixes the issue: https://github.com/dovecot/core/commit/dfa4b048ec9a174a42d6668e94501db2fb70… $ make check for bin in test-mail-index-map test-mail-index-modseq test-mail-index-sync-ext test-mail-index-transaction-finish test-mail-index-transaction-update test-mail-transaction-log-append test-mail-transaction-log-view; do \ if ! ./$bin; then exit 1; fi; \ done mail index map lookup seq range ...................................... : ok 0 / 1 tests failed mail_transaction_log_file_get_modseq_next_offset() ................... : ok 0 / 1 tests failed mail index sync ext atomic inc ....................................... : ok 0 / 1 tests failed mail index transaction finish flag updates n_so_far=0 ................ : ok mail index transaction finish flag updates n_so_far=1 ................ : ok mail index transaction finish flag updates n_so_far=2 ................ : ok mail index transaction finish check conflicts n_so_far=0 ............. : ok mail index transaction finish check conflicts n_so_far=1 ............. : ok mail index transaction finish check conflicts n_so_far=2 ............. : ok mail index transaction finish modseq updates n_so_far=0 .............. : ok mail index transaction finish modseq updates n_so_far=1 .............. : ok mail index transaction finish modseq updates n_so_far=2 .............. : ok mail index transaction finish expunges n_so_far=0 .................... : ok mail index transaction finish expunges n_so_far=1 .................... : ok mail index transaction finish expunges n_so_far=2 .................... : ok 0 / 12 tests failed mail index append .................................................... : ok mail index append with uids .......................................... : ok mail index flag update fast paths .................................... : ok mail index flag update simple merges ................................. : ok mail index flag update complex merges ................................ : ok mail index flag update random ........................................ : ok mail index flag update appends ....................................... : ok mail index cancel flag updates ....................................... : ok mail index transaction get flag update pos ........................... : ok mail index modseq update ............................................. : ok mail index expunge ................................................... : ok test-mail-index-transaction-update.c:649: Assert(#1) failed: new_hdr.day_stamp == tests[i].new_day_stamp + timezone test-mail-index-transaction-update.c:652: Assert(#1) failed: memcmp(new_hdr.day_first_uid, tests[i].new_day_first_uid, sizeof(uint32_t) * 8) == 0 test-mail-index-transaction-update.c:649: Assert(#3) failed: new_hdr.day_stamp == tests[i].new_day_stamp + timezone test-mail-index-transaction-update.c:652: Assert(#3) failed: memcmp(new_hdr.day_first_uid, tests[i].new_day_first_uid, sizeof(uint32_t) * 8) == 0 test-mail-index-transaction-update.c:649: Assert(#4) failed: new_hdr.day_stamp == tests[i].new_day_stamp + timezone test-mail-index-transaction-update.c:649: Assert(#5) failed: new_hdr.day_stamp == tests[i].new_day_stamp + timezone test-mail-index-transaction-update.c:652: Assert(#5) failed: memcmp(new_hdr.day_first_uid, tests[i].new_day_first_uid, sizeof(uint32_t) * 8) == 0 test-mail-index-transaction-update.c:649: Assert(#6) failed: new_hdr.day_stamp == tests[i].new_day_stamp + timezone test-mail-index-transaction-update.c:652: Assert(#6) failed: memcmp(new_hdr.day_first_uid, tests[i].new_day_first_uid, sizeof(uint32_t) * 8) == 0 test-mail-index-transaction-update.c:649: Assert(#7) failed: new_hdr.day_stamp == tests[i].new_day_stamp + timezone test-mail-index-transaction-update.c:652: Assert(#7) failed: memcmp(new_hdr.day_first_uid, tests[i].new_day_first_uid, sizeof(uint32_t) * 8) == 0 test-mail-index-transaction-update.c:649: Assert(#8) failed: new_hdr.day_stamp == tests[i].new_day_stamp + timezone test-mail-index-transaction-update.c:652: Assert(#8) failed: memcmp(new_hdr.day_first_uid, tests[i].new_day_first_uid, sizeof(uint32_t) * 8) == 0 test-mail-index-transaction-update.c:649: Assert(#9) failed: new_hdr.day_stamp == tests[i].new_day_stamp + timezone test-mail-index-transaction-update.c:652: Assert(#9) failed: memcmp(new_hdr.day_first_uid, tests[i].new_day_first_uid, sizeof(uint32_t) * 8) == 0 test-mail-index-transaction-update.c:649: Assert(#10) failed: new_hdr.day_stamp == tests[i].new_day_stamp + timezone test-mail-index-transaction-update.c:652: Assert(#10) failed: memcmp(new_hdr.day_first_uid, tests[i].new_day_first_uid, sizeof(uint32_t) * 8) == 0 test-mail-index-transaction-update.c:649: Assert(#11) failed: new_hdr.day_stamp == tests[i].new_day_stamp + timezone test-mail-index-transaction-update.c:649: Assert(#12) failed: new_hdr.day_stamp == tests[i].new_day_stamp + timezone mail index update day first uid ...................................... : FAILED test: random seed #1 was 1488809888 1 / 12 tests failed make: *** [check-test] Error 1

3 2

dovecot lda bouncing postfix aliases
by Ian Evans 02 Mar '17

02 Mar '17

Recently configured postfix to use the dovecot lda as I wanted to use sieve. Got that working a few days ago but noticed that I wasn't getting any emails to aliases. Checked the logs and saw messages like: Mar 1 08:19:59 carson postfix/lmtp[16949]: 0DCD22016BE: to=< sales(a)example.com>, relay=carson.example.com[private/dovecot-lmtp], delay=0.07, delays=0.01/0.01/0/0.04, dsn=5.1.1, status=bounced (host carson.example.com[private/dovecot-lmtp] said: 550 5.1.1 <sales(a)example.com> User doesn't exist: sales(a)example.com (in reply to RCPT TO command)) Aliases were working previously and are in /etc/postfix/vmaps Anything I need to check on the dovecot end of things to get dovecot to recognize postfix aliases? Thanks...reaching for my morning coffee. Info below: Dovecot 2.2.9 # 2.2.9: /etc/dovecot/dovecot.conf # OS: Linux 3.11.0-19-generic x86_64 Ubuntu 14.04.5 LTS ext4 auth_mechanisms = plain login cram-md5 mail_debug = yes mail_location = maildir:/home/vmail/%d/%n/Maildir managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = username_format=%u /etc/dovecot/shadow driver = passwd-file } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap pop3 sieve lmtp service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener /var/spool/postfix/private/dovecot-auth { group = postfix mode = 0660 user = postfix } } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0600 user = postfix } } ssl_cert = </etc/letsencrypt/live/example.com/fullchain.pem ssl_cipher_list = ALL:!LOW:!SSLv2:ALL:!aNULL:!ADH:!eNULL:!EXP:RC4+RSA:+HIGH:+MEDIUM ssl_key = </etc/letsencrypt/live/example.com/privkey.pem userdb { driver = passwd } userdb { args = username_format=%u /etc/dovecot/users driver = passwd-file } protocol lmtp { mail_plugins = sieve postmaster_address = postmaster(a)example.com } protocol lda { deliver_log_format = msgid=%m: %$ mail_plugins = sieve postmaster_address = postmaster quota_full_tempfail = yes rejection_reason = Your message to <%t> was automatically rejected:%n%r } protocol imap { imap_client_workarounds = delay-newmail mail_max_userip_connections = 10 } protocol pop3 { mail_max_userip_connections = 10 pop3_client_workarounds = outlook-no-nuls oe-ns-eoh }

2 3

Sieve subaddress matching
by Peter Chiochetti 02 Mar '17

02 Mar '17

Hello Stephan, Maybe this is not an issue at all and nothing but a curiosity; maybe though you do care: When there is only a local part in "To", the "subaddress" extension does not match on the "detail" part. This happened when I made a device on the LAN send to "name+foo", where "name" is a system account on the computer used as smtp. Such mail gets filed into INBOX. Matching the whole address against "name+foo" works. This is with dovecot-sieve 2.2.13, postfix here obviously does not alter the To header. -- peter

2 1

Search problems after activating fts/solr
by azurit＠pobox.sk 02 Mar '17

02 Mar '17

Hi, after activating fts/solr, we can see a changed behavior of standard (not fulltext) searches. For example, when searching the 'From' field for something(a)example.com, before activating solr it was ok to start search for word 'some' and the result was correct and complete (all messages from that user was found). After activating fts/solr, searches like this are returning none or only part of messages - i need to search for 'something' to get correct and complete result. Any hints? azur

1 0

Fwd: Some mails do not get replicated anymore after memory-exhaust
by Christoph Kluge 02 Mar '17

02 Mar '17

Hey guys, overall I have an working dovecot replication between 2 servers running on amazon cloud. Sadly I had some messages that my server ran out of memory. After investigating a little bit further I realized that some mails didn't got replicated, but I'm not sure if this was related to the memory exhaust. I was expecting that the full-sync would catch them up but sadly it's not. Attached I'm adding: * /etc/dovecot/dovecot.conf from both servers * one sample of my memory-exhaust exception * maildir directory listing of one mailbox on both servers * commands + outpot of manual attempt for full-replication * grep information of missing mail inside Maildir on both servers Here is my configuration from both servers. The configugration is 1:1 the same except the mail_replica server. Please note one server runs on debian 8.7 and the other one on 7.11. ---- SERVER A > # dovecot -n > # 2.2.13: /etc/dovecot/dovecot.conf > # OS: Linux 3.2.0-4-amd64 x86_64 Debian 8.7 > ---- SERVER B > # dovecot -n > # 2.2.13: /etc/dovecot/dovecot.conf > # OS: Linux 2.6.32-34-pve i686 Debian 7.11 > auth_mechanisms = plain login > disable_plaintext_auth = no > doveadm_password = **** > doveadm_port = 12345 > listen = *,[::] > log_timestamp = "%Y-%m-%d %H:%M:%S " > mail_max_userip_connections = 100 > mail_plugins = notify replication quota > mail_privileged_group = vmail > passdb { > args = /etc/dovecot/dovecot-sql.conf > driver = sql > } > plugin { > mail_replica = tcp:*.****.de > quota = dict:user::file:/var/vmail/%d/%n/.quotausage > replication_full_sync_interval = 1 hours > sieve = /var/vmail/%d/%n/.sieve > sieve_max_redirects = 25 > } > protocols = imap > replication_max_conns = 2 > service aggregator { > fifo_listener replication-notify-fifo { > mode = 0666 > user = vmail > } > unix_listener replication-notify { > mode = 0666 > user = vmail > } > } > service auth { > unix_listener /var/spool/postfix/private/auth { > group = postfix > mode = 0660 > user = postfix > } > unix_listener auth-userdb { > group = vmail > mode = 0600 > user = vmail > } > user = root > } > service config { > unix_listener config { > user = vmail > } > } > service doveadm { > inet_listener { > port = 12345 > } > user = vmail > } > service imap-login { > client_limit = 1000 > process_limit = 512 > } > service lmtp { > unix_listener /var/spool/postfix/private/dovecot-lmtp { > group = postfix > mode = 0600 > user = postfix > } > } > service replicator { > process_min_avail = 1 > unix_listener replicator-doveadm { > mode = 0666 > } > } > ssl_cert = </etc/postfix/smtpd.cert > ssl_key = </etc/postfix/smtpd.key > ssl_protocols = !SSLv2 !SSLv3 > userdb { > driver = prefetch > } > userdb { > args = /etc/dovecot/dovecot-sql.conf > driver = sql > } > protocol imap { > mail_plugins = notify replication quota imap_quota > } > protocol pop3 { > mail_plugins = quota > pop3_uidl_format = %08Xu%08Xv > } > protocol lda { > mail_plugins = notify replication quota sieve > postmaster_address = webmaster@localhost > } > protocol lmtp { > mail_plugins = notify replication quota sieve > postmaster_address = webmaster@localhost > } This is the exception which I got several times: Feb 26 16:16:39 mx dovecot: replicator: Panic: data stack: Out of memory > when allocating 268435496 bytes > Feb 26 16:16:39 mx dovecot: replicator: Error: Raw backtrace: > /usr/lib/dovecot/libdovecot.so.0(+0x6b6fe) [0x7f7ca2b0a6fe] -> > /usr/lib/dovecot/libdovecot.so.0(+0x6b7ec) [0x7f7ca2b0a7ec] -> > /usr/lib/dovecot/libdovecot.so.0(i_fatal+0) [0x7f7ca2ac18fb] -> > /usr/lib/dovecot/libdovecot.so.0(+0x6977e) [0x7f7ca2b0877e] -> > /usr/lib/dovecot/libdovecot.so.0(+0x699db) [0x7f7ca2b089db] -> > /usr/lib/dovecot/libdovecot.so.0(+0x82198) [0x7f7ca2b21198] -> > /usr/lib/dovecot/libdovecot.so.0(+0x6776d) [0x7f7ca2b0676d] -> > /usr/lib/dovecot/libdovecot.so.0(buffer_write+0x6c) [0x7f7ca2b069dc] -> > dovecot/replicator(replicator_queue_push+0x14e) [0x7f7ca2fa17ae] -> > dovecot/replicator(+0x4f9e) [0x7f7ca2fa0f9e] -> dovecot/replicator(+0x4618) > [0x7f7ca2fa0618] -> dovecot/replicator(+0x4805) [0x7f7ca2fa0805] -> > /usr/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x3f) [0x7f7ca2b1bd0f] > -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run_internal+0xf9) > [0x7f7ca2b1cd09] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x9) > [0x7f7ca2b1bd79] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_run+0x38) > [0x7f7ca2b1bdf8] -> /usr/lib/dovecot/libdovecot.so.0(master_service_run+0x13) > [0x7f7ca2ac6dc3] -> dovecot/replicator(main+0x195) [0x7f7ca2f9f8b5] -> > /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf5) [0x7f7ca2715b45] > -> dovecot/replicator(+0x395d) [0x7f7ca2f9f95d] > Feb 26 16:16:39 mx dovecot: imap(***.com): Warning: replication(***.com): > Sync failure: > Feb 26 16:16:39 mx dovecot: replicator: Fatal: master: > service(replicator): child 24012 killed with signal 6 (core dumps disabled) This is the current maildir listing on Server A # ls -la /var/vmail/*.eu/*h/Maildir/new/ > total 24 > drwx------ 2 vmail vmail 4096 Feb 27 18:12 . > drwx------ 15 vmail vmail 4096 Feb 27 21:47 .. > -rw------- 1 vmail vmail 3600 Feb 27 14:49 1488206976.M277562P25620.mail, > S=3600,W=3671 > -rw------- 1 vmail vmail 4390 Feb 27 15:17 1488208642.M513542P27111.mail, > S=4390,W=4478:2,S > -rw------- 1 vmail vmail 3577 Feb 27 16:32 1488213157.M307300P30773.mail, > S=3577,W=3648:2,S This is the current maildir listing on Server B # ls -la /var/vmail/*.eu/*h/Maildir/new/ > total 16 > drwx------ 2 vmail vmail 12288 Feb 27 16:45 . > drwx------ 15 vmail vmail 4096 Feb 27 21:47 .. This is how I tried to manually sync it doveadm -v sync -u *h(a)*.eu -f tcp:mx.***.de:12345 This is the users sync status # doveadm replicator status 'cheecoh(a)ragequit.eu' > username priority fast sync full sync failed > *h(a)*.eu none 00:24:47 10:57:04 - Then I tried to lookup for the mail-id which is also the same on both servers # grep -ri "M277562P25620" /var/vmail/*.eu/*h/ > /var/vmail/*.eu/*h/Maildir/dovecot-uidlist:493 :1488206976.M277562P25620. > mail,S=3600,W=3671 I have no idea what else I could do. I could also pass a "doveadm -Dv sync" output but this one is really huge.. Best Regards Christoph Kluge

1 1

dovecot-lda crash after upgrade to 2.2.28
by Max Kostikov 01 Mar '17

01 Mar '17

Hi! I posted this problem few days ago in FreeBSD bugtracker https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=217364 So, the problem is in crash of dovecot-lda client while local mailbox delivery with this message in log > dovecot: lda(my@email): Panic: file mail-namespace.c: line 709 > (mail_namespace_find): assertion failed: (ns != NULL) My Dovecot config stills the same from previous 2.2.27 installation to I believe that problem in new Dovecot code related namespace. System: > # uname -v > FreeBSD 11.0-RELEASE-p8 #0: Wed Feb 22 06:12:04 UTC 2017 > root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC Options: > root@beta:/usr/ports/mail/dovecot2 # make showconfig | grep =on > DOCS=on: Build and/or install documentation > EXAMPLES=on: Build and/or install examples > KQUEUE=on: kqueue(2) support > LIBWRAP=on: TCP wrapper support > LZ4=on: LZ4 compression support > MYSQL=on: MySQL database support > GSSAPI_BASE=on: Use GSSAPI from base Config: # doveconf -n # 2.2.27 (c0f36b0): /usr/local/etc/dovecot/dovecot.conf # Pigeonhole version 0.4.16 (fed8554) # OS: FreeBSD 11.0-RELEASE-p8 amd64 ufs auth_mechanisms = plain login default_login_user = dovecot dict { sqluserquota = mysql:/usr/local/etc/dovecot/dovecot-dict-sql-user.conf } disable_plaintext_auth = no first_valid_gid = 0 first_valid_uid = 25 lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes login_access_sockets = tcpwrap login_greeting = Dovecot ready! login_log_format_elements = user=<%u> method=%m rip=%r lip=%l %c mail_access_groups = mail mail_gid = 6 mail_location = maildir:/var/mail/%d/%n mail_plugins = acl quota trash mail_privileged_group = mail mail_uid = 26 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext namespace { location = maildir:/var/mail/%d/.public:INDEXPVT=/var/mail/%d/%n/public prefix = public. separator = . subscriptions = no type = public } namespace inbox { inbox = yes location = mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Junk { auto = subscribe special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox Trash { auto = subscribe special_use = \Trash } prefix = separator = . type = private } passdb { args = /usr/local/etc/dovecot/dovecot-sql.conf driver = sql } plugin { acl = vfile::cache_secs=300 antispam_backend = mailtrain antispam_mail_notspam = %u-revoke antispam_mail_sendmail = /usr/local/etc/dovecot/move-cmd.sh antispam_mail_sendmail_args = antispam_mail_spam = %u-report antispam_spam = Junk antispam_trash = Trash quota = dict:user_quota::proxy::sqluserquota quota_grace = 10%% quota_rule2 = Trash:storage=+10%% quota_rule3 = Junk:storage=+10%% quota_warning = storage=100%% quota-exceeded 100 %u quota_warning2 = storage=95%% quota-warning 95 %u quota_warning3 = storage=90%% quota-warning 90 %u quota_warning4 = storage=75%% quota-warning 75 %u sieve = ~/dovecot.sieve sieve_before = /usr/local/etc/dovecot/default.sieve sieve_dir = ~/sieve sieve_global_path = /usr/local/etc/dovecot/default.sieve trash = /usr/local/etc/dovecot/dovecot-trash.conf } protocols = imap pop3 lmtp sieve service auth { unix_listener auth-client { mode = 0660 user = mailnull } unix_listener auth-master { mode = 0660 user = mailnull } user = root } service dict { unix_listener dict { mode = 0660 user = mailnull } } service imap-login { chroot = login client_limit = 64 executable = /usr/local/libexec/dovecot/imap-login inet_listener imap { port = 143 } inet_listener imaps { port = 993 } process_limit = 32 process_min_avail = 8 service_count = 1 user = $default_login_user vsz_limit = 64 M } service imap { executable = /usr/local/libexec/dovecot/imap } service managesieve-login { inet_listener sieve { port = 4190 } process_min_avail = 1 service_count = 1 user = $default_login_user vsz_limit = 64 M } service managesieve { process_limit = 10 } service pop3-login { chroot = login client_limit = 64 executable = /usr/local/libexec/dovecot/pop3-login inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 } process_limit = 32 process_min_avail = 8 service_count = 1 user = $default_login_user vsz_limit = 64 M } service pop3 { executable = /usr/local/libexec/dovecot/pop3 } service quota-warning { executable = script /usr/local/etc/dovecot/quota_warning.sh unix_listener quota-warning { mode = 0660 user = mailnull } } service tcpwrap { unix_listener login/tcpwrap { mode = 0600 user = $default_login_user } } ssl_ca = </usr/local/etc/letsencrypt/live/peek.ru/chain.pem ssl_cert = </usr/local/etc/letsencrypt/live/peek.ru/cert.pem ssl_cipher_list = ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS ssl_dh_parameters_length = 2048 ssl_key = # hidden, use -P to show it ssl_prefer_server_ciphers = yes userdb { args = /usr/local/etc/dovecot/dovecot-sql.conf driver = sql } protocol sieve { managesieve_implementation_string = dovecot managesieve_max_line_length = 65536 } protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep mail_plugins = acl quota trash antispam imap_acl imap_quota } protocol lmtp { mail_plugins = acl quota trash sieve } protocol pop3 { pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xv } protocol lda { auth_socket_path = /var/run/dovecot/auth-master mail_plugins = acl quota trash sieve postmaster_address = postmaster(a)peek.ru sendmail_path = /usr/sbin/sendmail } local_name *.domain.ru { ssl_ca = </usr/local/etc/letsencrypt/live/domain.ru/chain.pem ssl_cert = </usr/local/etc/letsencrypt/live/domain.ru/cert.pem ssl_key = # hidden, use -P to show it } -- With best regards, Max Kostikov BBM: 24CA5DF8 | W: https://kostikov.co

3 11

Exclude namespace from replication
by George Kontostanos 01 Mar '17

01 Mar '17

Hello list, I am using replication with dsync and I am facing some issues with shared folders. More particularly expunged message reappearing. I have searched a bit and it was suggested that shared folders should not be synced. My namespace looks like that: namespace { inbox = no list = children location = maildir:/usr/local/vhosts/mail/%%d/%%n:LAYOUT=fs:INDEX=/usr/local/vhosts/indexes/%d/%n/shared/%%u:INDEXPVT=/usr/local/vhosts/indexes/%d/%n/shared/%%u prefix = shared/%%d/%%n/ separator = / subscriptions = no type = shared } I was wondering if defining: replication_dsync_parameters = -d -N -l 30 -U -x shared Is enough. Or do I need to change the syntax of the namespace like that: namespace shared { .... .... type = shared } Thanks for your help

1 0

Replacement for antispam plugin
by Aki Tuomi 01 Mar '17

01 Mar '17

Hi! Since antispam plugin is deprecated and we would really prefer people not to use it, we wrote instructions on how to replace it with IMAPSieve. Comments and suggestions are most welcome. https://wiki.dovecot.org/HowTo/AntispamWithSieve --- Aki Tuomi Dovecot oy

18 42

Expunged message reappeared, giving a new UID
by Γιώργος Δημακόπουλος 01 Mar '17

01 Mar '17

Dovecot 2.2.27 dsync-server(account_name): Warning: Maildir /usr/local/vhosts/mail/*******/info/Sent: Expunged message reappeared, giving a new UID (old uid=29787, file=*******) What triggers this replication for ever ?? Thank you George

2 1

Preserve environment variables for doveadm
by Teodor Milkov 01 Mar '17

01 Mar '17

Hello, I noticed there are ways to instruct various dovecot processes to preserve particular environment variables. One way is to use import_environment in dovecot.conf and yet another is to export DOVECOT_PRESERVE_ENVS variable – both can contain space delimited list of variables to preserve. I found report that this is supposed to work for dsync: http://www.dovecot.org/list/dovecot/2012-October/138659.html Unfortunately I can't it to work for "doveadm quota recalc". Is it supposed to work or am I doing something wrong? I did strace on the doveadm process and noticed it does exec() doveconf which in turn does exec() doveadm again. If I replace doveconf with a shell script which exports my environment variables then they become available to doveadm: # cat /dovecot/bin/doveconf.wrapper #!/bin/sh export LD_PRELOAD='dovecot-preload.so' exec /dovecot/bin/doveconf.orig "$@"

1 0

Expunged message reappeared, giving a new UID
by Γιώργος Δημακόπουλος 01 Mar '17

01 Mar '17

Please help. How to stop email replication is on going. dsync-server : Warning Expunged message reappeared, giving a new UID

1 0

Query about list policy?
by Andy R 28 Feb '17

28 Feb '17

Greetings for a second time today, As a quick query, what is the policy about linking to user-scripts and small addons ? I've used a couple of perl scripts to help me with dspam training from dovecot-antispam and imapsieve triggering for sorting and feeding messages to dspam in the background. They are most likely not the greatest but seem to work at least. I've posted them to github, but just wanted to ask whether it was an issue if i linked them here, or if they would need any review before posting or any other answer? Many thanks, and to Aki Tuomi and the dovecot team also. Andy R.

1 0

Quota usage value shows 140% of actual disk usage
by Umut Erol Kaçar 28 Feb '17

28 Feb '17

Hello everyone, Our server has these installed: dovecot-2.0.21-2.el6.x86_64 dovecot-pigeonhole-2.0.21-2.el6.x86_64 dovecot-mysql-2.0.21-2.el6.x86_64 ...and has been running for quite a long time, with several hundred domains and thousands of accounts on it. My colleagues reported that it's been showing quota usage values that are more than actual disk usage, so I investigated and found that Dovecot shows a quota usage value roughly around 140% of actual disk usage. It's also valid on newly created accounts. My test account for example: doveadm quota get -u test(a)example.local Quota name Type Value Limit % User quota STORAGE 4359 512000 0 User quota MESSAGE 7 - 0 du -sc /home/vmail/example.local/test/Maildir/{*,.[!.]*} 1044 /home/vmail/example.local/test/Maildir/cur 28 /home/vmail/example.local/test/Maildir/dovecot.index.cache 8 /home/vmail/example.local/test/Maildir/dovecot.index.log 4 /home/vmail/example.local/test/Maildir/dovecot.mailbox.log 4 /home/vmail/example.local/test/Maildir/dovecot-uidlist 4 /home/vmail/example.local/test/Maildir/dovecot-uidvalidity 0 /home/vmail/example.local/test/Maildir/dovecot-uidvalidity.56a4dc8e 4 /home/vmail/example.local/test/Maildir/new 4 /home/vmail/example.local/test/Maildir/subscriptions 4 /home/vmail/example.local/test/Maildir/tmp 24 /home/vmail/example.local/test/Maildir/.Junk 1932 /home/vmail/example.local/test/Maildir/.Sent 44 /home/vmail/example.local/test/Maildir/.Trash 3104 total 4359/3104=1,40431701 So it shows roughly around 1,4*actualDiskUsage. The ratio is mostly the same for almost all the other accounts. It can vary between like 1,3-1,6. So, the gap gets insane when more disk space is used, say like with 2GB disk usage, Dovecot thinks 3,5GB quota is used... dovecot quota recalc does not fix the issue, it only sets the same value again (I've checked with tcpdump and saw the query with the same quota usage value). The method is Dictionary quota with SQL. I'm attaching the dovecot -n output with some other config files. I've tried setting messages and bytes value to -1 on the MariaDB database to force recalculation. But as soon as I run doveadm quota recalc, it gets the same wrong value again. What can I do to fix this? Thanks in advance.

3 3

Index queue
by azurit＠pobox.sk 28 Feb '17

28 Feb '17

Hi, can i, somehow, list mailboxes which are to be indexed by indexer-worker (=index queue?) ? How can i know what part of all mailboxes was indexed so far? Are there any statistics about Solr data dir size based on emails amount? For example, we have about 5TB of emails, what should i except about index size in Solr? Thank you. azur

1 0