- dovecot - dovecot.org

[Dovecot] Postfix/Dovecot virtual - directory structure
by Johan Folin 23 Dec '06

23 Dec '06

Hi, perhaps I should post this in a Postfix forum but I'll give it a shot: I want my accounts sorted under /home/vmail/[domain]/[username] (and I managed to get Dovecot to look for mail there with %d and %n ), but how do I tell Postfix to sort the mail? I can't figure out how to do it. The virtual_mail_base is /home/vmail/ but there I get a bunch of folders in the form [username]@[domain]. I use mysql for the virtual mailboxes if that matters. I'll be grateful for any suggestions. /Johan Folin

3 3

[Dovecot] Filter logging
by Bas van den Dikkenberg 23 Dec '06

23 Dec '06

Hi, I have question i have loadbalancer that's connects every x seconds to my pop3 and Imap to see if it's still working. Every time it connects I see its ip is there a way to say don't log ip x.x.x.x ? With kind regards, Bas van den Dikkenberg

4 4

[Dovecot] Feature request: don't allow subscriptions to deleted mail boxes
by Erik van Oosten 23 Dec '06

23 Dec '06

Hello, Due to Thunderbird's mailbox deletion problem I was able to remove a mailbox while keeping the subscription. This was hugely annoying as Thunderbird is totally incapable of removing the subscription, even though the mailbox is long gone. It took me a while before I found a work around: I had to actually log in and remove a line from the .subscriptions file. You will probably get the same problem when you manually delete or rename a mailbox. So here is my feature request: please check for subscriptions to non-existing mail boxes and delete these when found. I am not sure what events would be appropriate for triggering the check, but I am sure there are some. Environment: - Dovecot 1.0 rc15 - SuSE Linux 10.0 - Thunderbird 1.5 Regards, Erik. PS. Thanks for Dovecot, it is the best IMAP server I have ever used. -- Erik van Oosten http://day-to-day-stuff.blogspot.com/

2 2

[Dovecot] NFS
by Timo Sirainen 23 Dec '06

23 Dec '06

I've finally managed to run Dovecot without errors in two computers with maildir and indexes stored in NFS. I added a page to wiki about this: http://wiki.dovecot.org/NFS Suggestions how to keep attribute cache enabled but to allow Dovecot to specifically request not to use a cached value (when it's important) would be welcome.

4 7

[Dovecot] Telnet Listing of IMAP mailboxes
by Lovell McIlwain 23 Dec '06

23 Dec '06

Hello all, I am trying to figure out why I am can't seem to access any of my mailboxes that I moved from my OS X machine using UW-IMAP and I followed the directions on the wiki (http://wiki.dovecot.org/MissingMailboxes) to try and figure this out. I believe based on what I saw that my client seems to be the problem, but my question is. Can anyone tell me what the difference between (\NoInferiors) and (\NoInferiors \Marked) All of my mailboxes showed up when I telnet'd to my IMAP server but I noticed some had that tag and some didn't and I'm just wondering if I should be concerned with the difference? If your not sure what I mean, here is a snipet of the command I ran and a small output: B list "" * * LIST (\NoInferiors) "/" INBOX * LIST (\NoInferiors \Marked) "/" "Junk E-mail"

2 1

[Dovecot] Dovecot killing OpenLDAP
by Gavin Henry 23 Dec '06

23 Dec '06

Hi all, For some reason, dovecot is holding a connection up, so we can't shutdown our directory server. OpenLDAP just sits there waiting for the thread to finish. Our OpenLDAP logs show (binding example and shutdown): connection_input: conn=1 deferring operation: binding daemon: shutdown requested and initiated. conn=1 fd=12 closed (slapd shutdown) slapd shutdown: waiting for 1 threads to terminate Sometimes the IMAP connection is also dropped. We are storing our users in the directory for passdb and userdb, no prefetch enabled. Running rc15 on FC6. This is crashing OpenLDAP 2.3.31 (bdb 4.2.52), as it won't shutdown. We have to do a db_recover after removing alock. Thanks. -- Kind Regards, Gavin Henry. Managing Director. T +44 (0) 1224 279484 M +44 (0) 7930 323266 F +44 (0) 1224 824887 E ghenry(a)suretecsystems.com Open Source. Open Solutions(tm). http://www.suretecsystems.com/

1 0

[Dovecot] NEWBIE: Package Requirements List?
by Aaron J Weber 23 Dec '06

23 Dec '06

I can't seem to find a succinct listing of the packages (and optional packages) required to compile dovecot. I see references to various RDBMS's, but nothing that says I actually _require_ one, etc. I see references to openssl, but similarly, I don't see that it's technically required. Is there a link I'm missing that indicates the pre-conditions (pre-installed/configured software) before compiling and linking dovecot? Thanks in advance! -AJ

2 1

[Dovecot] First Login (Thunderbird) Aborted in RC15?
by Timothy White 23 Dec '06

23 Dec '06

Not sure if this is anything to worry about. Just upgraded to RC15 to do some testing, and like always, I monitor the logs when I do this. I restarted the server (basically a clean install, uninstalled RC2, installed RC15, same config file), and then opened Thunderbird. (Ip's masked) Dec 15 14:35:50 mafeking dovecot: imap-login: Login: user=<joeblogs>, method=plain, rip=<me>, lip=<server>, TLS Dec 15 14:35:50 mafeking dovecot: imap-login: Aborted login: rip=<me>, lip=<server>, TLS Dec 15 14:35:50 mafeking dovecot: imap-login: Login: user=<joeblogs>, method=plain, rip=<me>, lip=<server>, TLS It seems ether Thunderbird tried to login twice and one failed, or it failed the first time but succeeded the second time? Doing the equivalent from Sylpheed (all IMAP, same account) produced just the following line. Dec 15 14:38:31 mafeking dovecot: imap-login: Login: user=<joeblogs>, method=PLAIN, rip=<me>, lip=<server>, TLS Any ideas? Thanks Tim -- Linux Counter user #273956

2 1

[Dovecot] dovecot and yahoo
by jason oommd 23 Dec '06

23 Dec '06

Hi gang, We just yum updated BQ server and now use dovecot instead of imapd/pop3 with a slight config all is well accept for one of our users that has a fancy yahoo account that allows them to pop other accounts into it. Used to work great until we switched to dovecot. any ideas ? jason intuitiveisp

3 2

[Dovecot] dovecot lda truncates messages
by Jef Driesen 23 Dec '06

23 Dec '06

I'm running dovecot 1.0.rc2 (package from ubuntu 6.10) and use the dovecot lda 'deliver' (also a package from ubuntu 6.10 with sieve filtering) to deliver messages to maildir. Everything works well, until I discovered a truncated message this week. The problematic message is a message bounced by the majordomo mailinglist software. I think the problem is related to the fact that the message body is another mail message (including the original headers and body). I attached two (scramled) versions of the message. The first one (message-normal.txt) is the file which is delivered to the maildir by the built-in postfix lda. The second one (message-truncated.txt) is delivered by the dovecot lda. Return-Path: <xxxxx-xxxxxxx(a)xxxxxxxxxxx.xx> X-Original-To: xxx(a)xxxxxxxxxxx.xxxxx Delivered-To: xxx(a)xxxxxxxxxxx.xxxxx Received: xxxx xxxxxxxxx (xxxxxxxxx [xxx.x.x.x]) xx xxxxx.xxxxxxxxxxx.xxxxx (xxxxxxx) xxxx xxxxx xx xxxxxxxxxx xxx <xxx(a)xxxxxxxxxxx.xxxxx>; xxx, xx xxx xxxx xx:xx:xx +xxxx (xxx) Delivered-To: xxxxxxxxxx(a)xxxxxxx.xx Received: xxxx xxx.xxxxxxx.xx [xxx.xxx.xxx.xx] xx xxxxxxxxx xxxx xxxx (xxxxxxxxx-x.x.x) xxx <xxx(a)xxxxxxxxxxx.xxxxx> (xxxxxx-xxxx); xxx, xx xxx xxxx xx:xx:xx +xxxx (xxx) Received: (xxxxx xxxxx xxxxxxx xxxx xxxxxxx); xx xxx xxxx xx:xx:xx -xxxx Received: xxxx xxxxxxxxx.xxxxxxx-xxx.xx ([xxx.xxx.xxx.xx]) (xxxxxxxx-xxxxxx <xxxxx-xxxxxxx(a)xxxxxxxxxxx.xx>) xx xxxxxx.xxxxxxx-xxx.xx (xxxxx-xxxx-x.xx) xxxx xxxx xxx <xxxxxxxxxx(a)xxxxxxx.xx>; xx xxx xxxx xx:xx:xx -xxxx Received: xxxx xxxxxxxxx.xxxxxxx-xxx.xx (xxxxxxxxx.xxxxxxx-xxx.xx [xxx.xxx.xxx.xx]) xx xxxxxxxxx.xxxxxxx-xxx.xx (x.xx.x/x.xx.x) xxxx xxxxx xx xxxxxxxxxxxxxx xxx <xxxxxxxxxx(a)xxxxxxx.xx>; xxx, xx xxx xxxx xx:xx:xx +xxxx Received: xxxx xxxxx.xxxxxxx-xxx.xx (xxxxx.xxxxxxx-xxx.xx [xxx.xxx.xxx.xx]) xx xxxxxxxxx.xxxxxxx-xxx.xx (xxxxxxx) xxxx xxxxx xx xxxxxxxxxxx xxx <xxxxxxxxxx(a)xxxxxxx.xx>; xxx, xx xxx xxxx xx:xx:xx +xxxx (xxx) Received: xxxx xxx.xxxxxxxxxx.xx (xxx.xxxxxxxxxx.xx [xxx.xx.xx.xx]) xx xxxxx.xxxxxxx-xxx.xx (xxxxxxx) xxxx xxxxx xx xxxxxxxxxxx xxx <xxxxxxxxxx(a)xxxxxxx.xx>; xxx, xx xxx xxxx xx:xx:xx +xxxx (xxx) Received: xxxx xxxxxxxxx xx xxx.xxxxxxxxxx.xx xxxx xxxxx (xxxx x.xx) xx xxxxxx-xxxxxx-xx xxx xxxxxxx-xxxxxxxx(a)xxxxxxxxxxx.xx; xxx, xx xxx xxxx xx:xx:xx +xxxx To: xxxxxxx-xxxxxxxx(a)xxxxxxxxxxx.xx From: xxxxx-xxxxxxx(a)xxxxxxxxxxx.xx Subject: xxxxxx xxxxxxx(a)xxxxxxxxxxx.xx: xxxxxxx xxx xxxx (>xxxxx xxxxx) Message-Id: <xxxxxxx-xxxxxx-xx(a)xxx.xxxxxxxxxx.xx> Date: Fri, 15 Dec 2006 13:31:45 +0100 >From xxx.xxxx.xxxx(a)xxxxx.xx Fri Dec 15 13:31:44 2006 Received: xxxx xxxxxxxx.xx.xx.xx ([xxx.xxx.xxx.xx]) xx xxx.xxxxxxxxxx.xx xxxx xxxxxx (xxxxx:xxxxxx-xxx:xxx) (xxxx x.xx) xx xxxxxx-xxxxxx-xx xxx xxxxxxx(a)xxxxxxxxxxx.xx; xxx, xx xxx xxxx xx:xx:xx +xxxx Received: xxxx xxxxxxx.xx.xx.xx.xx (xxxxxxx.xx.xx.xx [xxx.xxx.xxx.xx]) xx xxxxxxxx.xx.xx.xx (x.xx.x/x.xx.x) xxxx xxxxx xx xxxxxxxxxxxxxx xxx <xxxxxxx(a)xxxxxxxxxxx.xx>; xxx, xx xxx xxxx xx:xx:xx +xxxx Received: xxxx [xxx.xxx.xx.xx] ([xxx.xxx.xx.xx]) xx xxxxxxx.xx.xx.xx.xx xxxx xxx xxxxxxx xxxxxxx xxxx xxxxxxxxx xxxxxxx(x.x.xxxx.xxxx); xxx, xx xxx xxxx xx:xx:xx +xxxx Message-ID: <xxxxxxxx.xxxxxxx(a)xxxxx.xx> Date: Fri, 15 Dec 2006 13:28:50 +0100 From: xxx xxxx xxxx xxxxxx <xxx.xxxx.xxxx(a)xxxxx.xx> Reply-To: xxxxxxxxxx(a)xxxxxxx.xx User-Agent: xxxxxxxxxxx x.x.x.x (xxxxxxx/xxxxxxxx) MIME-Version: x.x To: xxx xxxx xxxx xxxxx <xxxxxxx(a)xxxxxxxxxxx.xx> Subject: xxxxxxx: [xxx: xxx xxxxxxxx xxxx] Content-Type: multipart/mixed; xxxxxxxx="------------xxxxxxxxxxxxxxxxxxxxxxxx" X-OriginalArrivalTime: xx xxx xxxx xx:xx:xx.xxxx (xxx) xxxxxxxx=[xxxxxxxx:xxxxxxxx] X-Greylist: xxxxxx xx xxxxxxxxxxx, xxx xxxxxxx xx xxxxxx-xxxxxxxx-x.xxxx (xxxxxxxx.xx.xx.xx [xxx.xxx.xxx.xx]); xxx, xx xxx xxxx xx:xx:xx +xxxx (xxx) X-Envelope-Recipient: <xxxxxxx(a)xxxxxxxxxxx.xx> X-Virus-Scanned-By: xxxxxxxx.xx.xx.xx xxxxx xxxxx. xxxxxx: xxxxx. X-Scanned-By: xxxxxxxxxx x.xx xx xxx.xxx.xxx.xx xxxx xx x xxxxx-xxxx xxxxxxx xx xxxx xxxxxx. --------------xxxxxxxxxxxxxxxxxxxxxxxx xxxxxxx-xxxx: xxxx/xxxxx; xxxxxxx=xxx-xxxx-x; xxxxxx=xxxxxx xxxxxxx-xxxxxxxx-xxxxxxxx: xxxx -------- xxxxxxxx xxxxxxx -------- xxxxxxx: xxx xxxxxxxx xxxx xxxx: xxx, xx xxx xxxx xx:xx:xx +xxxx xxxx: xxxxxx xxxxxx <xxxxxx.xxxxxx(a)xxxxxx.xx> xxxxx xxxxxxx , xx xxx xxxxxx xxx xxxxx xxxx xx xxxx xxxx xx xxx xxxxxxxxx xx xxxx xxxx xxxxx xx xxxxxxxxxx xxxxxx xx xxxxxxxxx xx xxxx xxxxxx xxxx xxxxxx.xxxxxx(a)xxxxxx.xx xx xx xxxxxxx xxx xxxxxxxx xxxx xx xxxxxxxx xxxxxxxxx xxxxxxx xxxxxx --------------xxxxxxxxxxxxxxxxxxxxxxxx xxxxxxx-xxxx: xxxxxxxxxxx/xxx; xxxx="xxxxxxxx xxxxx xx xxxxxxxxxx.xxx" xxxxxxx-xxxxxxxx-xxxxxxxx: xxxxxx xxxxxxx-xxxxxxxxxxx: xxxxxxxxxx; xxxxxxxx="xxxxxxxx xxxxx xx xxxxxxxxxx.xxx" --------------xxxxxxxxxxxxxxxxxxxxxxxx-- >From xxxxx-xxxxxxx(a)xxxxxxxxxxx.xx Sat Dec 16 16:48:08 2006 Return-Path: <xxxxx-xxxxxxx(a)xxxxxxxxxxx.xx> X-Original-To: xxx(a)xxxxxxxxxxx.xxxxx Delivered-To: xxx(a)xxxxxxxxxxx.xxxxx Received: xxxx xxxxxxxxx (xxxxxxxxx [xxx.x.x.x]) xx xxxxx.xxxxxxxxxxx.xxxxx (xxxxxxx) xxxx xxxxx xx xxxxxxxxxx xxx <xxx(a)xxxxxxxxxxx.xxxxx>; xxx, xx xxx xxxx xx:xx:xx +xxxx (xxx) Delivered-To: xxxxxxxxxx(a)xxxxxxx.xx Received: xxxx xxx.xxxxxxx.xx [xxx.xxx.xxx.xx] xx xxxxxxxxx xxxx xxxx (xxxxxxxxx-x.x.x) xxx <xxx(a)xxxxxxxxxxx.xxxxx> (xxxxxx-xxxx); xxx, xx xxx xxxx xx:xx:xx +xxxx (xxx) Received: (xxxxx xxxxx xxxxxxx xxxx xxxxxxx); xx xxx xxxx xx:xx:xx -xxxx Received: xxxx xxxxxxxxx.xxxxxxx-xxx.xx ([xxx.xxx.xxx.xx]) (xxxxxxxx-xxxxxx <xxxxx-xxxxxxx(a)xxxxxxxxxxx.xx>) xx xxxxxx.xxxxxxx-xxx.xx (xxxxx-xxxx-x.xx) xxxx xxxx xxx <xxxxxxxxxx(a)xxxxxxx.xx>; xx xxx xxxx xx:xx:xx -xxxx Received: xxxx xxxxxxxxx.xxxxxxx-xxx.xx (xxxxxxxxx.xxxxxxx-xxx.xx [xxx.xxx.xxx.xx]) xx xxxxxxxxx.xxxxxxx-xxx.xx (x.xx.x/x.xx.x) xxxx xxxxx xx xxxxxxxxxxxxxx xxx <xxxxxxxxxx(a)xxxxxxx.xx>; xxx, xx xxx xxxx xx:xx:xx +xxxx Received: xxxx xxxxx.xxxxxxx-xxx.xx (xxxxx.xxxxxxx-xxx.xx [xxx.xxx.xxx.xx]) xx xxxxxxxxx.xxxxxxx-xxx.xx (xxxxxxx) xxxx xxxxx xx xxxxxxxxxxx xxx <xxxxxxxxxx(a)xxxxxxx.xx>; xxx, xx xxx xxxx xx:xx:xx +xxxx (xxx) Received: xxxx xxx.xxxxxxxxxx.xx (xxx.xxxxxxxxxx.xx [xxx.xx.xx.xx]) xx xxxxx.xxxxxxx-xxx.xx (xxxxxxx) xxxx xxxxx xx xxxxxxxxxxx xxx <xxxxxxxxxx(a)xxxxxxx.xx>; xxx, xx xxx xxxx xx:xx:xx +xxxx (xxx) Received: xxxx xxxxxxxxx xx xxx.xxxxxxxxxx.xx xxxx xxxxx (xxxx x.xx) xx xxxxxx-xxxxxx-xx xxx xxxxxxx-xxxxxxxx(a)xxxxxxxxxxx.xx; xxx, xx xxx xxxx xx:xx:xx +xxxx To: xxxxxxx-xxxxxxxx(a)xxxxxxxxxxx.xx From: xxxxx-xxxxxxx(a)xxxxxxxxxxx.xx Subject: xxxxxx xxxxxxx(a)xxxxxxxxxxx.xx: xxxxxxx xxx xxxx (>xxxxx xxxxx) Message-Id: <xxxxxxx-xxxxxx-xx(a)xxx.xxxxxxxxxx.xx> Date: Fri, 15 Dec 2006 13:31:45 +0100

2 1

[Dovecot] Configuration Question.
by James Andrews 23 Dec '06

23 Dec '06

Hi Everyone. I have recently installed dovecot for the first time on a RHEL3 server. I have it working for the most part, but am a bit baffled by part of the configuration, something that I am sure I am just doing incorrectly. I can successfully access my normal mailbox which is in /var/spool/ mail/username, but I also want to create mail folders, and that's the problem I am having. I want the folders to live in ~/mail/ I have tried default_mail_env = mbox:~/mail/:INBOX=/var/spool/mail/%u and default_mail_env = maildir:~/mail:INBOX=/var/spool/mail/%u What on earth am I doing wrong? I'm sure it's something small that I just don't understand. Thanks James

4 4

[Dovecot] Bug: (dovecot-auth), exited on signal 6
by art 23 Dec '06

23 Dec '06

Hello What additional information I should give? uname -a FreeBSD mail 6.2-PRERELEASE FreeBSD 6.2-PRERELEASE #1: Thu Oct 19 16:57:14 UTC 2006 root@:/usr/obj/usr/src/sys/my i386 mail# dovecot --version 1.0.rc15 mail# dovecot --build-options Build options: ioloop=kqueue notify=kqueue openssl SQL drivers: mysql Passdb: checkpassword pam passwd passwd-file sql Userdb: checkpassword passwd prefetch passwd-file sql static Dec 19 12:49:42 mail dovecot: auth(default): cache(m52(a)academ.org): Password mismatch Dec 19 12:49:42 mail dovecot: auth(default): file passdb-blocking.c: line 125 (passdb_blocking_verify_plain): assertion failed: (request->extra_fields == NULL) Dec 19 12:49:42 mail dovecot: child 91510 (auth) killed with signal 6 Dec 19 09:20:39 mail pid 96304 (dovecot-auth), uid 65534: exited on signal 6 Dec 19 09:43:31 mail pid 21093 (dovecot-auth), uid 65534: exited on signal 6 Dec 19 09:49:54 mail pid 36637 (dovecot-auth), uid 65534: exited on signal 6 Dec 19 10:02:08 mail pid 40803 (dovecot-auth), uid 65534: exited on signal 6 Dec 19 10:52:43 mail pid 50557 (dovecot-auth), uid 65534: exited on signal 6 Dec 19 10:57:30 mail pid 91182 (dovecot-auth), uid 65534: exited on signal 6 Dec 19 11:33:11 mail pid 94522 (dovecot-auth), uid 65534: exited on signal 6 Dec 19 11:38:21 mail pid 27978 (dovecot-auth), uid 65534: exited on signal 6 Dec 19 11:43:22 mail pid 32969 (dovecot-auth), uid 65534: exited on signal 6 Dec 19 11:48:31 mail pid 36764 (dovecot-auth), uid 65534: exited on signal 6 Dec 19 11:53:32 mail pid 40849 (dovecot-auth), uid 65534: exited on signal 6 Dec 19 11:58:41 mail pid 45037 (dovecot-auth), uid 65534: exited on signal 6 Dec 19 12:03:52 mail pid 49541 (dovecot-auth), uid 65534: exited on signal 6 Dec 19 12:08:51 mail pid 54324 (dovecot-auth), uid 65534: exited on signal 6 Dec 19 12:14:02 mail pid 58746 (dovecot-auth), uid 65534: exited on signal 6 Dec 19 12:19:02 mail pid 63283 (dovecot-auth), uid 65534: exited on signal 6 Dec 19 12:24:11 mail pid 68142 (dovecot-auth), uid 65534: exited on signal 6 Dec 19 12:29:22 mail pid 72969 (dovecot-auth), uid 65534: exited on signal 6 Dec 19 12:34:21 mail pid 77396 (dovecot-auth), uid 65534: exited on signal 6 Dec 19 12:39:32 mail pid 81976 (dovecot-auth), uid 65534: exited on signal 6 Dec 19 12:44:36 mail pid 86217 (dovecot-auth), uid 65534: exited on signal 6 Dec 19 12:44:41 mail pid 91404 (dovecot-auth), uid 65534: exited on signal 6

2 1

[Dovecot] auto-detection of user mailbox type
by John Harper 23 Dec '06

23 Dec '06

The config file indicates that if mail_location is empty, dovecot will try to find the mailboxes automatically (and by implication determine if the user is using mbox or Maildir format). But if the mbox inbox is non-standard (I have procmail delivering to ~/.mail) then one needs to specify mail_location = mbox:~/mail:INBOX=~/.mail and presumably dovecot will no longer try to determine what each user is doing. I'd like to slowly convert users from mbox to Maildir (putting DEFAULT=Maildir/ in the users' .procmailrc accomplishes that from the delivery side) and have dovecot still automatically figure out which way to work, based on finding ~/Maildir (or not). Somehow I don't think mail_location = maildir:~/Maildir:mbox:~/mail:INBOX=~/.mail is going to do what I want. I saw the example on multiple mailboxes using namespaces, but I confess I'm not clear on that especially with ragard to the INBOX setting. I know I can set mail_location on a per-user basis using the userdb (eg ldap) but was hoping to avoid that. Is there a way to specify the details of the mbox configuration, but have dovecot instead use Maildir if that exists? Thanks, John Harper ------------------------------------------------- Senior Systems Administrator Information and Instructional Technology Services University of Toronto Scarborough harper(a)utsc.utoronto.ca

2 3

[Dovecot] Lazy expunge plugin
by Timo Sirainen 23 Dec '06

23 Dec '06

There's now a plugin called lazy_expunge in CVS. Instead of EXPUNGE expunging the mails directly, they're moved to a mailbox with same name in another namespace where user can still copy the mails back. Also DELETEd mailboxes are moved to another namespace. See http://wiki.dovecot.org/Plugins/Lazyexpunge for more information. This is similar to Cyrus's two phase expunge: http://www-uxsup.csx.cam.ac.uk/~dpc22/cyrus/two_phase_expunge.html

2 2

[Dovecot] TR: Mail location
by Fatou Ndiaye 23 Dec '06

23 Dec '06

-----Message d'origine----- De : Fatou Ndiaye [mailto:fatou.ndiaye@orange.sn] Envoyé : jeudi 21 décembre 2006 08:47 À : 'Dovecot Mailing List' Cc : 'Timo Sirainen' Objet : Mail location Hi all, Is it possible to have two mail locations in the dovecot.conf? In fact, the disk where were the mailboxes is almost full and It will be easier for me to just add an other disk hotplug and add an other mail location. -----Message d'origine----- De : dovecot-bounces(a)dovecot.org [mailto:dovecot-bounces@dovecot.org] De la part de Timo Sirainen Envoyé : mercredi 16 août 2006 13:02 À : Marcin Deranek Cc : dovecot(a)dovecot.org Objet : Re: [Dovecot] dovecot 1.0rc6 and LDAP problem On Wed, 2006-08-16 at 09:38 +0200, Marcin Deranek wrote: > Aug 15 18:58:36 ftp dovecot: login: tried to change state 2 -> 2 (if you > can't login at all, see src/lib/fdpass.c) I'm not sure about the LDAP problems, but this is interesting. Are you using login_process_per_connection=yes or no?

2 1

[Dovecot] umask 007 ineffective with newly created Maildir message
by Steve James 22 Dec '06

22 Dec '06

This is for Dovecot 1.0.rc15 from Debian Backports on 3.1 Stable, x86; Filesystems are local reiserfs; IMAPs client is KMail 1.9.5 Non-default settings in dovecot.conf: protocols = imaps ssl_cert_file = /etc/dovecot/mail.cert.pem ssl_key_file = /etc/dovecot/mail.key.pem mail_location = maildir:/var/mail/ambrosia.plus.com/%n mail_extra_groups = mail first_valid_uid = 1000 first_valid_gid = 1000 umask = 007 maildir_copy_with_hardlinks = yes To reproduce:- 1. Using your IMAP client with two IMAP accounts, copy a message from a folder in one account, to a folder in the other account 2. See that the newly created message file is -rw------- If a message is moved between folders on the _same_ account, however, the group permissions are preserved (ie not masked off). So it seems that the umask option is ineffective when the imap daemon creates a new maildir message file. Thanks, Steve. -- BOFH excuse #400: We are Microsoft. What you are experiencing is not a problem; it is an undocumented feature.

4 4

[Dovecot] Assertion failed
by Steven F Siirila 22 Dec '06

22 Dec '06

We have been running 1.0-rc15 for some time on a very small set of users. We recently have increased the user population and just ran into a problem with one user. That user is using a client we apparently had not tested yet and is causing us to get these errors in the logs: [Host name, IP address, and user name are not real] Dec 21 15:23:00 [hostname] dovecot: imap-login: Login: user=<username>, method=PLAIN, rip=10.10.10.10, lip=10.10.10.11, TLS Dec 21 15:23:00 [hostname] dovecot: IMAP(username): file strfuncs.c: line 151 (p_strdup_until): assertion failed: ((const char *) start <= (const char *) end) Dec 21 15:23:00 [hostname] dovecot: child 7151 (imap) killed with signal 6 -- Steven F. Siirila Office: Lind Hall, Room 130B Internet Services E-mail: sfs(a)umn.edu Office of Information Technology Voice: (612) 626-0244 University of Minnesota Fax: (612) 626-7593

2 1

[Dovecot] Deleting mail accounts older than 6 monthes
by Najib Abi Fadel 22 Dec '06

22 Dec '06

Hi, i have a mail server with many users and i am using dovecot as pop3 server. I was wondering if there is a way to detect the last date each user logged in to the server for retrieving his mail. I need to delete the users that has not logged in to their accounts the last 6 monthes. Many thanks for any help. __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

4 5

[Dovecot] dbox support state
by Farkas Levente 22 Dec '06

22 Dec '06

hi, what is the current state of dovecot dbox support? is it stable, fast and usable? is it have current advantage over maildir or it will only have when it'll be optimized? is it worth to choose as a default mailbox format in a new dovecot install? thanks. yours. -- Levente "Si vis pacem para bellum!"

3 4

Re: [Dovecot] dbox support state
by Bill Boebel 22 Dec '06

22 Dec '06

On Fri, December 22, 2006 2:14 am, Steffen Kaiser <skdovecot(a)smail.inf.fh-bonn-rhein-sieg.de> said: > On Thu, 21 Dec 2006, Timo Sirainen wrote: > >> One optimization left for it would be to not store flags and keywords to >> the dbox files at all, but keep everything in index files. Once I get >> that implemented, I'll start benchmarking it. Of course the problem with >> that is that it relies on index files completely then. > > IMHO this is not good for disaster recovery and makes life needlessly hard > in such case. Esp. when both files become out-of-sync, you need a cunning > tool to re-construct any good state, rather than a simple "REINDEX". This > should apply to each kind of "index" file. Also, consider upgrades to > newer index file formats etc.pp. > > Are there really that many writes of message attributes? I mean, there is > only an improvement because you have just one write into the indexes > rather than two, one to the indexes and one into the message. > You've wrote that you reserve space for the flags in mbox, in case they > get updated, so you reduce the probability to rewrite the whole mbox for > each flag. Doing so should apply to dbox as well? It should be an option. Big mail systems can benefit from this optimization, but many systems may not see anything noticeable. You can do a lot of cool things with your storage once you're dealing with write-once mail data, where all actions after receiving a message get written somewhere outside of where the mail content is stored... including expunges. This is a step in that direction. Bill

1 0

[Dovecot] [Fwd: Re: missing /etc/aliases file]
by Kartagis 22 Dec '06

22 Dec '06

Forgot to Reply All -------- Original Message -------- Subject: Re: missing /etc/aliases file Date: Fri, 22 Dec 2006 09:42:46 +0200 From: Kartagis <kartagis(a)kunduz.org> To: Keith Roberts <keith(a)karsites.net> References: <D2B43561-0BAD-440F-97C0-712616E1E560(a)cox.net> <200612210856.40994.ml(a)awinkelmann.de> <64A0FED1-F20E-4D90-A0E9-0FE8A67DC0EC(a)cox.net> <20061221182636.GM8372(a)piias899.ms.com> <6F42AC60-7A86-4ABE-BC15-2200C347472A(a)cox.net> <2f8462f30612211433v63cfbf1eu8c1bdb56ebe32e6a(a)mail.gmail.com> <317AC147-BEB2-4365-9DAE-719A8CD1658E(a)cox.net> <2f8462f30612211525t35664570m5c1ebdb102566309(a)mail.gmail.com> <Pine.LNX.4.64.0612220702470.29122(a)karsites.net> Keith Roberts wrote: > Hi all. I've been getting the following errors on FC6 when > trying to start postfix: > > The following error occured after a clean installation of > postfix and fetchmail. > > part contents of /var/log/maillog: > > Dec 22 07:08:16 fedora-laptop postfix/postalias[3132]: > fatal: open /etc/aliases: No such file or directory > > Dec 22 07:08:18 fedora-laptop postfix/postfix-script: > starting the Postfix mail system > > Dec 22 07:08:18 fedora-laptop postfix/master[3178]: daemon > started -- version 2.3.3, configuration /etc/postfix > > Dec 22 07:09:43 fedora-laptop postfix/smtpd[3198]: fatal: > open database /etc/aliases.db: No such file or directory > > Dec 22 07:09:44 fedora-laptop postfix/master[3178]: warning: > process /usr/libexec/postfix/smtpd pid 3198 exit status 1 > > Dec 22 07:09:44 fedora-laptop postfix/master[3178]: warning: > /usr/libexec/postfix/smtpd: bad command startup -- > throttling > > The problem appears to be no /etc/aliases text file in the > said directory, /etc. > Try *find /etc/ -name aliases* and see where its exact location is > I see that postfix will actually generate the > /etc/aliases.db file from /etc/aliases, on each startup of > postfix. > That's incorrect. You need to run *newaliases* each time you edit aliases file and a new aliases.db will be generated. > My main question is where does the text file /etc/aliases > originate from? > > Is it part of the standard Linux distribution? > > Or is it generated somehow for each specific Linux > installation? > > Also, Can I use the /etc/aliases text file on my laptop for > my main machine, if one does not exist there after > installing postfix on it? > > I need to know that the postfix installation will complete > successfully with FC6 on my main machine, before installing > FC6 there, in place of SuSE 10.1. > > TIA > > Keith Roberts > > ------------------------------------------------------------ > http://www.karsites.net > http://www.raised-from-the-dead.org.uk > > This email address is challenge-response protected with > http://www.tmda.net > ------------------------------------------------------------ >

1 1

[Dovecot] email message size limit
by Fred Bauer 22 Dec '06

22 Dec '06

Simple question: I've discovered that dovecot's IMAP server imposes a ~5Mb limit on email message size. After a day of searching I cannot find the configuration parameter that governs this size. What is it? Or is there no such parameter? Thanks in advance, Fred P.S. ... and yes I've discovered the quota, Maildir++, etc plugin but that doesn't seem to be what I'm after.

3 3

[Dovecot] [PATCH] Fix for dovecotpw on powerpc and other architectures
by Fabio Tranchitella 21 Dec '06

21 Dec '06

Hi, please apply the following patch to dovecotpw. Without this, it will be unusable on powerpc and (maybe) other architectures where the char is unsigned by default. --- dovecot-1.0/src/util/dovecotpw.c (revisione 2066) +++ dovecot-1.0.new/src/util/dovecotpw.c (copia locale) @@ -40,7 +40,7 @@ const char *user = NULL; char *scheme = NULL; char *plaintext = NULL; - char ch; + signed char ch; int lflag = 0, Vflag = 0; lib_init(); Thanks! Fabio Tranchitella <kobold(a)debian.org> .''`. Proud Debian GNU/Linux developer, admin and user. : :' : `. `'` http://people.debian.org/~kobold/ `- _____________________________________________________________________ 1024D/7F961564, fpr 5465 6E69 E559 6466 BF3D 9F01 2BF8 EE2B 7F96 1564

3 2

[Dovecot] HELLO IS THERE ANYBODY OUT THERE ????
by Rian Booyer - Camden County Library District 21 Dec '06

21 Dec '06

hey guy's anyone have a clue as to why my dovecot is going so slow??? Rian Booyer Library Systems Analyst Camden County Library District rian(a)ccld.us <http://www.ccld.us/> http://www.ccld.us Phone: 573-346-7733 Fax: 573-346-1263

4 3

Re: [Dovecot] Userdb authentication cache
by Bill Boebel 21 Dec '06

21 Dec '06

On Thu, December 21, 2006 1:28 pm, Timo Sirainen <tss(a)iki.fi> said: > On Thu, 2006-12-21 at 18:16 +0100, LeVA wrote: >> 2006. December 21. 17:05, Timo Sirainen: >> > Committed to CVS HEAD already. I think this is small enough change >> > that it won't break anything too badly for v1.0, but I'd like to get >> > some testing first. Here's a patch against branch_1_0 CVS and latest >> > nightly snapshot (looks like they haven't been updating for a while, >> > started building new a new one now): >> > >> > http://dovecot.org/patches/userdb-cache.diff >> > >> > Please try and tell me if it breaks something. :) >> What is this doing? What is an userdb auth cache? > > See auth_cache_size setting, it already caches passdb lookups. So things > such as SQL and LDAP queries. I vote yes, commit this to branch_1_0 once it is tested a bit. We'll do some testing. Bill

1 0

Re: [Dovecot] dbox support state
by Bill Boebel 21 Dec '06

21 Dec '06

On Thu, December 21, 2006 11:24 am, Timo Sirainen <tss(a)iki.fi> said: > > One optimization left for it would be to not store flags and keywords to > the dbox files at all, but keep everything in index files. Once I get > that implemented, I'll start benchmarking it. Of course the problem with > that is that it relies on index files completely then. > With dbox, have you considered having one collection of dbox files per namespace, rather than one collection of dbox files per mailbox/folder, and then use indexes to track which emails belong to each mailbox/folder? This would drastically speed up copying between folders, because you'd just update the index rather than writing the copied email to a new dbox file. Just a thought. Bill

2 1

[Dovecot] Userdb authentication cache
by Timo Sirainen 21 Dec '06

21 Dec '06

Committed to CVS HEAD already. I think this is small enough change that it won't break anything too badly for v1.0, but I'd like to get some testing first. Here's a patch against branch_1_0 CVS and latest nightly snapshot (looks like they haven't been updating for a while, started building new a new one now): http://dovecot.org/patches/userdb-cache.diff Please try and tell me if it breaks something. :)

2 2

[Dovecot] Sloooooow pop3 downloads
by Rian Booyer - Camden County Library District 21 Dec '06

21 Dec '06

it's verry slow i saw in the archives something about strace and will include it below please help: my dovecot is crawling when downloading through pop here is my last trace file contents :18:04.657706 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:04.756949 gettimeofday({1165868284, 756976}, {360, 0}) = 0 14:18:04.757076 gettimeofday({1165868284, 757102}, NULL) = 0 14:18:04.757204 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:04.757392 gettimeofday({1165868284, 757419}, {360, 0}) = 0 14:18:04.757519 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:04.757584 gettimeofday({1165868284, 757610}, NULL) = 0 14:18:04.757708 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:04.856950 gettimeofday({1165868284, 856977}, {360, 0}) = 0 14:18:04.857104 gettimeofday({1165868284, 857134}, NULL) = 0 14:18:04.857231 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:04.857421 gettimeofday({1165868284, 857447}, {360, 0}) = 0 14:18:04.857521 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:04.857587 gettimeofday({1165868284, 857613}, NULL) = 0 14:18:04.857710 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:04.956915 gettimeofday({1165868284, 956942}, {360, 0}) = 0 14:18:04.957014 gettimeofday({1165868284, 957041}, NULL) = 0 14:18:04.957140 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:04.957329 gettimeofday({1165868284, 957355}, {360, 0}) = 0 14:18:04.957430 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:04.957495 gettimeofday({1165868284, 957521}, NULL) = 0 14:18:04.957593 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:05.056920 gettimeofday({1165868285, 56949}, {360, 0}) = 0 14:18:05.057022 gettimeofday({1165868285, 57048}, NULL) = 0 14:18:05.057124 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:05.057340 gettimeofday({1165868285, 57366}, {360, 0}) = 0 14:18:05.057466 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:05.057531 gettimeofday({1165868285, 57558}, NULL) = 0 14:18:05.057656 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:05.156940 gettimeofday({1165868285, 156968}, {360, 0}) = 0 14:18:05.157015 gettimeofday({1165868285, 157041}, NULL) = 0 14:18:05.157115 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:05.157325 gettimeofday({1165868285, 157351}, {360, 0}) = 0 14:18:05.157426 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:05.157517 gettimeofday({1165868285, 157543}, NULL) = 0 14:18:05.157642 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:05.256904 gettimeofday({1165868285, 256933}, {360, 0}) = 0 14:18:05.257006 gettimeofday({1165868285, 257032}, NULL) = 0 14:18:05.257133 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:05.257323 gettimeofday({1165868285, 257349}, {360, 0}) = 0 14:18:05.257423 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:05.257517 gettimeofday({1165868285, 257543}, NULL) = 0 14:18:05.257615 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:05.356854 gettimeofday({1165868285, 356881}, {360, 0}) = 0 14:18:05.357007 gettimeofday({1165868285, 357033}, NULL) = 0 14:18:05.357104 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:05.357311 gettimeofday({1165868285, 357338}, {360, 0}) = 0 14:18:05.357466 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:05.357584 gettimeofday({1165868285, 357610}, NULL) = 0 14:18:05.357714 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:05.456866 gettimeofday({1165868285, 456893}, {360, 0}) = 0 14:18:05.456993 gettimeofday({1165868285, 457022}, NULL) = 0 14:18:05.457089 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:05.457278 gettimeofday({1165868285, 457304}, {360, 0}) = 0 14:18:05.457405 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:05.457471 gettimeofday({1165868285, 457497}, NULL) = 0 14:18:05.457594 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:05.556842 gettimeofday({1165868285, 556869}, {360, 0}) = 0 14:18:05.556995 gettimeofday({1165868285, 557026}, NULL) = 0 14:18:05.557123 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:05.557312 gettimeofday({1165868285, 557338}, {360, 0}) = 0 14:18:05.557438 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:05.557530 gettimeofday({1165868285, 557556}, NULL) = 0 14:18:05.557653 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:05.656809 gettimeofday({1165868285, 656836}, {360, 0}) = 0 14:18:05.656909 gettimeofday({1165868285, 656935}, NULL) = 0 14:18:05.657010 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:05.657199 gettimeofday({1165868285, 657225}, {360, 0}) = 0 14:18:05.657298 gettimeofday({1165868285, 657324}, NULL) = 0 14:18:05.657395 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:05.657600 gettimeofday({1165868285, 657627}, {360, 0}) = 0 14:18:05.657707 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:05.657798 gettimeofday({1165868285, 657824}, NULL) = 0 14:18:05.657948 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:05.756800 gettimeofday({1165868285, 756828}, {360, 0}) = 0 14:18:05.756901 gettimeofday({1165868285, 756928}, NULL) = 0 14:18:05.757002 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:05.757218 gettimeofday({1165868285, 757244}, {360, 0}) = 0 14:18:05.757344 gettimeofday({1165868285, 757370}, NULL) = 0 14:18:05.757441 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:05.757629 gettimeofday({1165868285, 757660}, {360, 0}) = 0 14:18:05.757761 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:05.757897 gettimeofday({1165868285, 757924}, NULL) = 0 14:18:05.758053 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:05.857810 gettimeofday({1165868285, 857845}, {360, 0}) = 0 14:18:05.857893 gettimeofday({1165868285, 857920}, NULL) = 0 14:18:05.857963 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:05.858150 gettimeofday({1165868285, 858176}, {360, 0}) = 0 14:18:05.858224 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:05.858292 gettimeofday({1165868285, 858318}, NULL) = 0 14:18:05.858389 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:05.957788 gettimeofday({1165868285, 957819}, {360, 0}) = 0 14:18:05.957893 gettimeofday({1165868285, 957920}, NULL) = 0 14:18:05.957994 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:05.958209 gettimeofday({1165868285, 958237}, {360, 0}) = 0 14:18:05.958309 gettimeofday({1165868285, 958335}, NULL) = 0 14:18:05.958434 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:05.958626 gettimeofday({1165868285, 958652}, {360, 0}) = 0 14:18:05.958726 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:05.958819 gettimeofday({1165868285, 958845}, NULL) = 0 14:18:05.958947 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:06.058937 gettimeofday({1165868286, 58997}, {360, 0}) = 0 14:18:06.059058 gettimeofday({1165868286, 59095}, NULL) = 0 14:18:06.059153 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:06.059412 gettimeofday({1165868286, 59449}, {360, 0}) = 0 14:18:06.059514 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:06.059619 gettimeofday({1165868286, 59657}, NULL) = 0 14:18:06.059713 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:06.158966 gettimeofday({1165868286, 159029}, {360, 0}) = 0 14:18:06.159093 gettimeofday({1165868286, 159131}, NULL) = 0 14:18:06.159191 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:06.159463 gettimeofday({1165868286, 159501}, {360, 0}) = 0 14:18:06.159566 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:06.159663 gettimeofday({1165868286, 159703}, NULL) = 0 14:18:06.159751 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:06.258728 gettimeofday({1165868286, 258761}, {360, 0}) = 0 14:18:06.258808 gettimeofday({1165868286, 258835}, NULL) = 0 14:18:06.258934 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:06.259120 gettimeofday({1165868286, 259148}, {360, 0}) = 0 14:18:06.259219 gettimeofday({1165868286, 259247}, NULL) = 0 14:18:06.259318 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:06.259506 gettimeofday({1165868286, 259533}, {360, 0}) = 0 14:18:06.259585 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:06.259653 gettimeofday({1165868286, 259681}, NULL) = 0 14:18:06.259778 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:06.358698 gettimeofday({1165868286, 358726}, {360, 0}) = 0 14:18:06.358772 gettimeofday({1165868286, 358799}, NULL) = 0 14:18:06.358898 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:06.359060 gettimeofday({1165868286, 359087}, {360, 0}) = 0 14:18:06.359186 gettimeofday({1165868286, 359214}, NULL) = 0 14:18:06.359337 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:06.359544 gettimeofday({1165868286, 359578}, {360, 0}) = 0 14:18:06.359678 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:06.359744 gettimeofday({1165868286, 359771}, NULL) = 0 14:18:06.359869 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:06.459681 gettimeofday({1165868286, 459710}, {360, 0}) = 0 14:18:06.459835 gettimeofday({1165868286, 459864}, NULL) = 0 14:18:06.459987 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:06.460176 gettimeofday({1165868286, 460203}, {360, 0}) = 0 14:18:06.460277 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:06.460369 gettimeofday({1165868286, 460396}, NULL) = 0 14:18:06.460467 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:06.559692 gettimeofday({1165868286, 559722}, {360, 0}) = 0 14:18:06.559795 gettimeofday({1165868286, 559822}, NULL) = 0 14:18:06.559949 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:06.560137 gettimeofday({1165868286, 560164}, {360, 0}) = 0 14:18:06.560236 gettimeofday({1165868286, 560263}, NULL) = 0 14:18:06.560359 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:06.560550 gettimeofday({1165868286, 560577}, {360, 0}) = 0 14:18:06.560624 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:06.560716 gettimeofday({1165868286, 560743}, NULL) = 0 14:18:06.560841 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL, revents=POLLIN}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 1 14:18:06.644487 gettimeofday({1165868286, 644526}, {360, 0}) = 0 14:18:06.644621 recvmsg(16, {msg_name(0)=NULL, msg_iov(1)=[{"\1\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 56}], msg_controllen=0, msg_flags=0}, 0) = 56 14:18:06.644763 gettimeofday({1165868286, 644794}, NULL) = 0 14:18:06.644994 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL, revents=POLLIN}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 15) = 1 14:18:06.650474 gettimeofday({1165868286, 650519}, {360, 0}) = 0 14:18:06.650582 recvmsg(16, {msg_name(0)=NULL, msg_iov(1)=[{"\1\0\0\0\1\0\0\0\356Z\0\0\1\0\0\0\n\0\0\0\0\0\0\0\0\0\0"..., 56}], msg_controllen=16, {cmsg_len=16, cmsg_level=SOL_SOCKET, cmsg_type=SCM_RIGHTS, {19}}, msg_flags=0}, 0) = 56 14:18:06.650783 fcntl64(19, F_GETFD) = 0 14:18:06.650880 fcntl64(19, F_SETFD, FD_CLOEXEC) = 0 14:18:06.650985 write(13, "REQUEST\t67\t23590\t1\n", 19) = 19 14:18:06.651094 gettimeofday({1165868286, 651137}, NULL) = 0 14:18:06.651189 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL, revents=POLLIN}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 8) = 1 14:18:06.651373 gettimeofday({1165868286, 651402}, {360, 0}) = 0 14:18:06.651451 read(13, "USER\t67\tericah\tsystem_user=erica"..., 3834) = 67 14:18:06.651564 pipe([30, 31]) = 0 14:18:06.651671 fcntl64(30, F_GETFD) = 0 14:18:06.651736 fcntl64(30, F_SETFD, FD_CLOEXEC) = 0 14:18:06.651857 fcntl64(31, F_GETFD) = 0 14:18:06.651974 fcntl64(31, F_SETFD, FD_CLOEXEC) = 0 14:18:06.652067 fstat64(30, {st_mode=S_IFIFO|0600, st_size=0, ...}) = 0 14:18:06.652197 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0xb7f4b708) = 23601 14:18:06.653589 close(31) = 0 14:18:06.653694 write(16, "\1\0\0\0\1\0\0\0", 8) = 8 14:18:06.654389 --- SIGCHLD (Child exited) @ 0 (0) --- 14:18:06.654449 close(19) = 0 14:18:06.654557 gettimeofday({1165868286, 654597}, NULL) = 0 14:18:06.654656 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL, revents=POLLIN|POLLHUP}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL, revents=POLLIN|POLLHUP}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=30, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 18, 5) = 2 14:18:06.655027 gettimeofday({1165868286, 655069}, {360, 0}) = 0 14:18:06.655134 recvmsg(16, {msg_name(0)=NULL, msg_iov(1)=[{"C\0\0\0\1\0\0\0\1\0\0\0\1\0\0\0C\0\0\0\v\333\5\10v\356"..., 56}], msg_controllen=0, msg_flags=0}, 0) = 0 14:18:06.655261 close(16) = 0 14:18:06.655339 read(20, "\1ILogin: user=<ericah>, method=P"..., 1024) = 86 14:18:06.655456 time(NULL) = 1165868286 14:18:06.655558 stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=1279, ...}) = 0 14:18:06.655733 write(9, "dovecot: Dec 11 14:18:06 Info: p"..., 127) = 127 14:18:06.655872 gettimeofday({1165868286, 655899}, NULL) = 0 14:18:06.655997 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=30, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL, revents=POLLHUP}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 4) = 1 14:18:06.656194 gettimeofday({1165868286, 656220}, {360, 0}) = 0 14:18:06.656293 read(20, "", 938) = 0 14:18:06.656362 close(20) = 0 14:18:06.656433 gettimeofday({1165868286, 656459}, NULL) = 0 14:18:06.656565 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=30, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 16, 3) = 0 14:18:06.659700 gettimeofday({1165868286, 659726}, {360, 0}) = 0 14:18:06.659800 gettimeofday({1165868286, 659830}, NULL) = 0 14:18:06.659954 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=30, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 16, 0) = 0 14:18:06.660154 gettimeofday({1165868286, 660181}, {360, 0}) = 0 14:18:06.660280 gettimeofday({1165868286, 660306}, NULL) = 0 14:18:06.660403 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=30, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 16, 0) = 0 14:18:06.660595 gettimeofday({1165868286, 660622}, {360, 0}) = 0 14:18:06.660722 waitpid(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], WNOHANG) = 23590 14:18:06.660805 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:06.660875 gettimeofday({1165868286, 660901}, NULL) = 0 14:18:06.660999 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=30, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL, revents=POLLIN}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 16, 99) = 1 14:18:06.665861 --- SIGCHLD (Child exited) @ 0 (0) --- 14:18:06.665905 gettimeofday({1165868286, 665936}, {360, 0}) = 0 14:18:06.665987 read(30, "\1ILogout. top=0/0, retr=0/ del=0"..., 1024) = 43 14:18:06.666106 time(NULL) = 1165868286 14:18:06.666230 stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=1279, ...}) = 0 14:18:06.666374 write(9, "dovecot: Dec 11 14:18:06 Info: p"..., 86) = 86 14:18:06.666500 gettimeofday({1165868286, 666536}, NULL) = 0 14:18:06.666633 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=30, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL, revents=POLLHUP}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 16, 93) = 1 14:18:06.666826 gettimeofday({1165868286, 666854}, {360, 0}) = 0 14:18:06.666927 read(30, "", 981) = 0 14:18:06.667022 close(30) = 0 14:18:06.667119 gettimeofday({1165868286, 667146}, NULL) = 0 14:18:06.667243 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 15, 92) = 0 14:18:06.759648 gettimeofday({1165868286, 759678}, {360, 0}) = 0 14:18:06.759776 gettimeofday({1165868286, 759807}, NULL) = 0 14:18:06.759850 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 15, 0) = 0 14:18:06.760028 gettimeofday({1165868286, 760055}, {360, 0}) = 0 14:18:06.760127 gettimeofday({1165868286, 760154}, NULL) = 0 14:18:06.760251 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 15, 0) = 0 14:18:06.760401 gettimeofday({1165868286, 760428}, {360, 0}) = 0 14:18:06.760561 waitpid(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], WNOHANG) = 23601 14:18:06.760640 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:06.760707 gettimeofday({1165868286, 760734}, NULL) = 0 14:18:06.760806 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 15, 99) = 0 14:18:06.860607 gettimeofday({1165868286, 860636}, {360, 0}) = 0 14:18:06.860681 gettimeofday({1165868286, 860708}, NULL) = 0 14:18:06.860778 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 15, 0) = 0 14:18:06.861002 gettimeofday({1165868286, 861030}, {360, 0}) = 0 14:18:06.861129 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:06.861220 gettimeofday({1165868286, 861247}, NULL) = 0 14:18:06.861317 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 15, 99) = 0 14:18:06.960619 gettimeofday({1165868286, 960647}, {360, 0}) = 0 14:18:06.960718 gettimeofday({1165868286, 960745}, NULL) = 0 14:18:06.960844 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 15, 0) = 0 14:18:06.961021 gettimeofday({1165868286, 961048}, {360, 0}) = 0 14:18:06.961120 gettimeofday({1165868286, 961147}, NULL) = 0 14:18:06.961244 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 15, 0) = 0 14:18:06.961421 gettimeofday({1165868286, 961448}, {360, 0}) = 0 14:18:06.961553 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:06.961645 gettimeofday({1165868286, 961690}, NULL) = 0 14:18:06.961817 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 15, 99) = 0 14:18:07.061579 gettimeofday({1165868287, 61607}, {360, 0}) = 0 14:18:07.061653 gettimeofday({1165868287, 61680}, NULL) = 0 14:18:07.061751 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 15, 0) = 0 14:18:07.061930 gettimeofday({1165868287, 61957}, {360, 0}) = 0 14:18:07.062057 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:07.062176 gettimeofday({1165868287, 62204}, NULL) = 0 14:18:07.062274 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 15, 98) = 0 14:18:07.160589 gettimeofday({1165868287, 160617}, {360, 0}) = 0 14:18:07.160663 gettimeofday({1165868287, 160690}, NULL) = 0 14:18:07.160790 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 15, 0) = 0 14:18:07.160967 gettimeofday({1165868287, 160994}, {360, 0}) = 0 14:18:07.161093 gettimeofday({1165868287, 161137}, NULL) = 0 14:18:07.161235 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 15, 0) = 0 14:18:07.161413 gettimeofday({1165868287, 161446}, {360, 0}) = 0 14:18:07.161520 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:07.161612 gettimeofday({1165868287, 161639}, NULL) = 0 14:18:07.161683 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 15, 99) = 0 14:18:07.260552 gettimeofday({1165868287, 260582}, {360, 0}) = 0 14:18:07.260654 gettimeofday({1165868287, 260681}, NULL) = 0 14:18:07.260779 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 15, 0) = 0 14:18:07.260930 gettimeofday({1165868287, 260957}, {360, 0}) = 0 14:18:07.261082 gettimeofday({1165868287, 261109}, NULL) = 0 14:18:07.261207 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 15, 0) = 0 14:18:07.261383 gettimeofday({1165868287, 261410}, {360, 0}) = 0 14:18:07.261483 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:07.261561 socketpair(PF_FILE, SOCK_STREAM, 0, [16, 19]) = 0 14:18:07.261697 pipe([20, 30]) = 0 14:18:07.261775 fcntl64(20, F_GETFD) = 0 14:18:07.261867 fcntl64(20, F_SETFD, FD_CLOEXEC) = 0 14:18:07.261959 fcntl64(30, F_GETFD) = 0 14:18:07.262051 fcntl64(30, F_SETFD, FD_CLOEXEC) = 0 14:18:07.262142 fstat64(20, {st_mode=S_IFIFO|0600, st_size=0, ...}) = 0 14:18:07.262270 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0xb7f4b708) = 23602 14:18:07.263480 fcntl64(16, F_GETFL) = 0x2 (flags O_RDWR) 14:18:07.263584 fcntl64(16, F_SETFL, O_RDWR|O_NONBLOCK) = 0 14:18:07.263668 fcntl64(16, F_GETFD) = 0 14:18:07.263753 fcntl64(16, F_SETFD, FD_CLOEXEC) = 0 14:18:07.263845 _llseek(16, 0, 0xbf968590, SEEK_CUR) = -1 ESPIPE (Illegal seek) 14:18:07.263942 getsockname(16, {sa_family=AF_FILE, path="'"}, [2]) = 0 14:18:07.264133 close(19) = 0 14:18:07.264203 close(30) = 0 14:18:07.264282 gettimeofday({1165868287, 264316}, NULL) = 0 14:18:07.264372 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL, revents=POLLIN}], 17, 96) = 1 14:18:07.268409 gettimeofday({1165868287, 268449}, {360, 0}) = 0 14:18:07.268510 recvmsg(16, {msg_name(0)=NULL, msg_iov(1)=[{"\1\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 56}], msg_controllen=0, msg_flags=0}, 0) = 56 14:18:07.268652 gettimeofday({1165868287, 268684}, NULL) = 0 14:18:07.268732 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 92) = 0 14:18:07.361564 gettimeofday({1165868287, 361594}, {360, 0}) = 0 14:18:07.361668 gettimeofday({1165868287, 361694}, NULL) = 0 14:18:07.361768 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:07.361959 gettimeofday({1165868287, 361986}, {360, 0}) = 0 14:18:07.362061 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:07.362128 gettimeofday({1165868287, 362155}, NULL) = 0 14:18:07.362279 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 98) = 0 14:18:07.460532 gettimeofday({1165868287, 460559}, {360, 0}) = 0 14:18:07.460659 gettimeofday({1165868287, 460686}, NULL) = 0 14:18:07.460755 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:07.460918 gettimeofday({1165868287, 460944}, {360, 0}) = 0 14:18:07.461024 gettimeofday({1165868287, 461050}, NULL) = 0 14:18:07.461121 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:07.461309 gettimeofday({1165868287, 461336}, {360, 0}) = 0 14:18:07.461386 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:07.461451 gettimeofday({1165868287, 461478}, NULL) = 0 14:18:07.461576 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:07.560534 gettimeofday({1165868287, 560563}, {360, 0}) = 0 14:18:07.560663 gettimeofday({1165868287, 560693}, NULL) = 0 14:18:07.560764 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:07.560952 gettimeofday({1165868287, 560978}, {360, 0}) = 0 14:18:07.561077 gettimeofday({1165868287, 561104}, NULL) = 0 14:18:07.561174 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:07.561363 gettimeofday({1165868287, 561394}, {360, 0}) = 0 14:18:07.561441 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:07.561532 gettimeofday({1165868287, 561559}, NULL) = 0 14:18:07.561686 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:07.661549 gettimeofday({1165868287, 661578}, {360, 0}) = 0 14:18:07.661652 gettimeofday({1165868287, 661681}, NULL) = 0 14:18:07.661779 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:07.661968 gettimeofday({1165868287, 661994}, {360, 0}) = 0 14:18:07.662068 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:07.662133 gettimeofday({1165868287, 662160}, NULL) = 0 14:18:07.662258 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 98) = 0 14:18:07.760511 gettimeofday({1165868287, 760538}, {360, 0}) = 0 14:18:07.760584 gettimeofday({1165868287, 760611}, NULL) = 0 14:18:07.760684 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:07.760846 gettimeofday({1165868287, 760872}, {360, 0}) = 0 14:18:07.760972 gettimeofday({1165868287, 760998}, NULL) = 0 14:18:07.761096 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:07.761275 gettimeofday({1165868287, 761302}, {360, 0}) = 0 14:18:07.761408 gettimeofday({1165868287, 761434}, NULL) = 0 14:18:07.761532 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:07.761727 gettimeofday({1165868287, 761753}, {360, 0}) = 0 14:18:07.761880 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:07.761946 gettimeofday({1165868287, 761972}, NULL) = 0 14:18:07.762069 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:07.861531 gettimeofday({1165868287, 861559}, {360, 0}) = 0 14:18:07.861631 gettimeofday({1165868287, 861656}, NULL) = 0 14:18:07.861728 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:07.861935 gettimeofday({1165868287, 861963}, {360, 0}) = 0 14:18:07.862036 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:07.862129 gettimeofday({1165868287, 862155}, NULL) = 0 14:18:07.862253 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 98) = 0 14:18:07.960481 gettimeofday({1165868287, 960507}, {360, 0}) = 0 14:18:07.960580 gettimeofday({1165868287, 960610}, NULL) = 0 14:18:07.960708 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:07.960897 gettimeofday({1165868287, 960923}, {360, 0}) = 0 14:18:07.961023 gettimeofday({1165868287, 961049}, NULL) = 0 14:18:07.961147 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:07.961338 gettimeofday({1165868287, 961364}, {360, 0}) = 0 14:18:07.961438 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:07.961530 gettimeofday({1165868287, 961556}, NULL) = 0 14:18:07.961631 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:08.061468 gettimeofday({1165868288, 61498}, {360, 0}) = 0 14:18:08.061601 gettimeofday({1165868288, 61627}, NULL) = 0 14:18:08.061699 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:08.061862 gettimeofday({1165868288, 61888}, {360, 0}) = 0 14:18:08.061962 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:08.062028 gettimeofday({1165868288, 62054}, NULL) = 0 14:18:08.062178 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 98) = 0 14:18:08.160451 gettimeofday({1165868288, 160479}, {360, 0}) = 0 14:18:08.160607 gettimeofday({1165868288, 160633}, NULL) = 0 14:18:08.160731 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:08.160920 gettimeofday({1165868288, 160965}, {360, 0}) = 0 14:18:08.161038 gettimeofday({1165868288, 161065}, NULL) = 0 14:18:08.161188 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:08.161411 gettimeofday({1165868288, 161438}, {360, 0}) = 0 14:18:08.161539 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:08.161608 gettimeofday({1165868288, 161634}, NULL) = 0 14:18:08.161732 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:08.261436 gettimeofday({1165868288, 261464}, {360, 0}) = 0 14:18:08.261566 gettimeofday({1165868288, 261592}, NULL) = 0 14:18:08.261690 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:08.261878 gettimeofday({1165868288, 261905}, {360, 0}) = 0 14:18:08.262005 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:08.262072 gettimeofday({1165868288, 262099}, NULL) = 0 14:18:08.262197 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 98) = 0 14:18:08.360411 gettimeofday({1165868288, 360438}, {360, 0}) = 0 14:18:08.360567 gettimeofday({1165868288, 360592}, NULL) = 0 14:18:08.360690 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:08.360879 gettimeofday({1165868288, 360906}, {360, 0}) = 0 14:18:08.361005 gettimeofday({1165868288, 361031}, NULL) = 0 14:18:08.361129 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:08.361326 gettimeofday({1165868288, 361353}, {360, 0}) = 0 14:18:08.361427 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:08.361492 gettimeofday({1165868288, 361518}, NULL) = 0 14:18:08.361619 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:08.461403 gettimeofday({1165868288, 461431}, {360, 0}) = 0 14:18:08.461533 gettimeofday({1165868288, 461558}, NULL) = 0 14:18:08.461683 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:08.461892 gettimeofday({1165868288, 461918}, {360, 0}) = 0 14:18:08.461992 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:08.462110 gettimeofday({1165868288, 462136}, NULL) = 0 14:18:08.462263 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 98) = 0 14:18:08.560388 gettimeofday({1165868288, 560415}, {360, 0}) = 0 14:18:08.560516 gettimeofday({1165868288, 560542}, NULL) = 0 14:18:08.560640 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:08.560830 gettimeofday({1165868288, 560856}, {360, 0}) = 0 14:18:08.560930 gettimeofday({1165868288, 560956}, NULL) = 0 14:18:08.561054 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:08.561267 gettimeofday({1165868288, 561294}, {360, 0}) = 0 14:18:08.561394 gettimeofday({1165868288, 561420}, NULL) = 0 14:18:08.561520 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:08.561708 gettimeofday({1165868288, 561734}, {360, 0}) = 0 14:18:08.561808 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:08.561873 gettimeofday({1165868288, 561899}, NULL) = 0 14:18:08.561998 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:08.661373 gettimeofday({1165868288, 661400}, {360, 0}) = 0 14:18:08.661502 gettimeofday({1165868288, 661528}, NULL) = 0 14:18:08.661626 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:08.661814 gettimeofday({1165868288, 661840}, {360, 0}) = 0 14:18:08.661914 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:08.662032 gettimeofday({1165868288, 662058}, NULL) = 0 14:18:08.662182 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 98) = 0 14:18:08.760351 gettimeofday({1165868288, 760379}, {360, 0}) = 0 14:18:08.760452 gettimeofday({1165868288, 760483}, NULL) = 0 14:18:08.760581 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:08.760769 gettimeofday({1165868288, 760795}, {360, 0}) = 0 14:18:08.760894 gettimeofday({1165868288, 760920}, NULL) = 0 14:18:08.761018 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:08.761210 gettimeofday({1165868288, 761235}, {360, 0}) = 0 14:18:08.761335 gettimeofday({1165868288, 761361}, NULL) = 0 14:18:08.761433 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:08.761617 gettimeofday({1165868288, 761644}, {360, 0}) = 0 14:18:08.761745 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:08.761862 gettimeofday({1165868288, 761888}, NULL) = 0 14:18:08.761986 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:08.861344 gettimeofday({1165868288, 861371}, {360, 0}) = 0 14:18:08.861473 gettimeofday({1165868288, 861499}, NULL) = 0 14:18:08.861597 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:08.861786 gettimeofday({1165868288, 861812}, {360, 0}) = 0 14:18:08.861940 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:08.862031 gettimeofday({1165868288, 862057}, NULL) = 0 14:18:08.862155 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 98) = 0 14:18:08.960327 gettimeofday({1165868288, 960354}, {360, 0}) = 0 14:18:08.960427 gettimeofday({1165868288, 960457}, NULL) = 0 14:18:08.960555 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:08.960734 gettimeofday({1165868288, 960761}, {360, 0}) = 0 14:18:08.960861 gettimeofday({1165868288, 960887}, NULL) = 0 14:18:08.960985 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:08.961177 gettimeofday({1165868288, 961203}, {360, 0}) = 0 14:18:08.961302 gettimeofday({1165868288, 961328}, NULL) = 0 14:18:08.961426 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:08.961619 gettimeofday({1165868288, 961645}, {360, 0}) = 0 14:18:08.961746 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:08.961837 gettimeofday({1165868288, 961863}, NULL) = 0 14:18:08.961962 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:09.061313 gettimeofday({1165868289, 61343}, {360, 0}) = 0 14:18:09.061389 gettimeofday({1165868289, 61416}, NULL) = 0 14:18:09.061517 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:09.061706 gettimeofday({1165868289, 61732}, {360, 0}) = 0 14:18:09.061833 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:09.061898 gettimeofday({1165868289, 61924}, NULL) = 0 14:18:09.062023 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:09.161296 gettimeofday({1165868289, 161324}, {360, 0}) = 0 14:18:09.161425 gettimeofday({1165868289, 161451}, NULL) = 0 14:18:09.161550 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:09.161739 gettimeofday({1165868289, 161765}, {360, 0}) = 0 14:18:09.161866 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:09.161984 gettimeofday({1165868289, 162010}, NULL) = 0 14:18:09.162108 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 98) = 0 14:18:09.260274 gettimeofday({1165868289, 260303}, {360, 0}) = 0 14:18:09.260401 gettimeofday({1165868289, 260427}, NULL) = 0 14:18:09.260550 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:09.260739 gettimeofday({1165868289, 260765}, {360, 0}) = 0 14:18:09.260865 gettimeofday({1165868289, 260891}, NULL) = 0 14:18:09.260989 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:09.261184 gettimeofday({1165868289, 261211}, {360, 0}) = 0 14:18:09.261337 gettimeofday({1165868289, 261363}, NULL) = 0 14:18:09.261463 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:09.261652 gettimeofday({1165868289, 261678}, {360, 0}) = 0 14:18:09.261780 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:09.261845 gettimeofday({1165868289, 261871}, NULL) = 0 14:18:09.261986 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:09.361240 gettimeofday({1165868289, 361267}, {360, 0}) = 0 14:18:09.361314 gettimeofday({1165868289, 361340}, NULL) = 0 14:18:09.361415 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:09.361604 gettimeofday({1165868289, 361630}, {360, 0}) = 0 14:18:09.361731 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:09.361822 gettimeofday({1165868289, 361848}, NULL) = 0 14:18:09.361947 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:09.461224 gettimeofday({1165868289, 461251}, {360, 0}) = 0 14:18:09.461351 gettimeofday({1165868289, 461381}, NULL) = 0 14:18:09.461479 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:09.461712 gettimeofday({1165868289, 461738}, {360, 0}) = 0 14:18:09.461839 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:09.461904 gettimeofday({1165868289, 461930}, NULL) = 0 14:18:09.462001 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:09.561207 gettimeofday({1165868289, 561234}, {360, 0}) = 0 14:18:09.561361 gettimeofday({1165868289, 561387}, NULL) = 0 14:18:09.561485 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:09.561673 gettimeofday({1165868289, 561700}, {360, 0}) = 0 14:18:09.561774 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:09.561865 gettimeofday({1165868289, 561891}, NULL) = 0 14:18:09.561990 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:09.661219 gettimeofday({1165868289, 661247}, {360, 0}) = 0 14:18:09.661349 gettimeofday({1165868289, 661375}, NULL) = 0 14:18:09.661473 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:09.661679 gettimeofday({1165868289, 661706}, {360, 0}) = 0 14:18:09.661806 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:09.661872 gettimeofday({1165868289, 661898}, NULL) = 0 14:18:09.661996 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:09.761177 gettimeofday({1165868289, 761205}, {360, 0}) = 0 14:18:09.761277 gettimeofday({1165868289, 761304}, NULL) = 0 14:18:09.761374 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:09.761563 gettimeofday({1165868289, 761590}, {360, 0}) = 0 14:18:09.761690 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:09.761782 gettimeofday({1165868289, 761808}, NULL) = 0 14:18:09.761906 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:09.861402 gettimeofday({1165868289, 861462}, {360, 0}) = 0 14:18:09.861520 gettimeofday({1165868289, 861554}, NULL) = 0 14:18:09.861610 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:09.861856 gettimeofday({1165868289, 861889}, {360, 0}) = 0 14:18:09.861947 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:09.862035 gettimeofday({1165868289, 862068}, NULL) = 0 14:18:09.862121 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 98) = 0 14:18:09.960217 gettimeofday({1165868289, 960255}, {360, 0}) = 0 14:18:09.960305 gettimeofday({1165868289, 960332}, NULL) = 0 14:18:09.960406 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:09.960622 gettimeofday({1165868289, 960649}, {360, 0}) = 0 14:18:09.960721 gettimeofday({1165868289, 960747}, NULL) = 0 14:18:09.960846 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:09.961062 gettimeofday({1165868289, 961089}, {360, 0}) = 0 14:18:09.961189 gettimeofday({1165868289, 961215}, NULL) = 0 14:18:09.961290 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:09.961506 gettimeofday({1165868289, 961532}, {360, 0}) = 0 14:18:09.961650 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:09.961719 gettimeofday({1165868289, 961746}, NULL) = 0 14:18:09.961870 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:10.061191 gettimeofday({1165868290, 61224}, {360, 0}) = 0 14:18:10.061274 gettimeofday({1165868290, 61301}, NULL) = 0 14:18:10.061400 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:10.061645 gettimeofday({1165868290, 61672}, {360, 0}) = 0 14:18:10.061746 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:10.061813 gettimeofday({1165868290, 61839}, NULL) = 0 14:18:10.061963 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:10.161131 gettimeofday({1165868290, 161162}, {360, 0}) = 0 14:18:10.161209 gettimeofday({1165868290, 161235}, NULL) = 0 14:18:10.161363 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:10.161578 gettimeofday({1165868290, 161603}, {360, 0}) = 0 14:18:10.161678 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:10.161744 gettimeofday({1165868290, 161770}, NULL) = 0 14:18:10.161867 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:10.261129 gettimeofday({1165868290, 261156}, {360, 0}) = 0 14:18:10.261230 gettimeofday({1165868290, 261256}, NULL) = 0 14:18:10.261327 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:10.261537 gettimeofday({1165868290, 261564}, {360, 0}) = 0 14:18:10.261638 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:10.261705 gettimeofday({1165868290, 261731}, NULL) = 0 14:18:10.261836 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:10.361142 gettimeofday({1165868290, 361169}, {360, 0}) = 0 14:18:10.361244 gettimeofday({1165868290, 361270}, NULL) = 0 14:18:10.361368 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:10.361555 gettimeofday({1165868290, 361581}, {360, 0}) = 0 14:18:10.361681 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:10.361746 gettimeofday({1165868290, 361772}, NULL) = 0 14:18:10.361871 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:10.461091 gettimeofday({1165868290, 461119}, {360, 0}) = 0 14:18:10.461248 gettimeofday({1165868290, 461275}, NULL) = 0 14:18:10.461399 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:10.461587 gettimeofday({1165868290, 461613}, {360, 0}) = 0 14:18:10.461714 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:10.461805 gettimeofday({1165868290, 461831}, NULL) = 0 14:18:10.461933 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:10.561080 gettimeofday({1165868290, 561107}, {360, 0}) = 0 14:18:10.561236 gettimeofday({1165868290, 561262}, NULL) = 0 14:18:10.561333 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:10.561521 gettimeofday({1165868290, 561547}, {360, 0}) = 0 14:18:10.561621 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:10.561738 gettimeofday({1165868290, 561764}, NULL) = 0 14:18:10.561863 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:10.661056 gettimeofday({1165868290, 661083}, {360, 0}) = 0 14:18:10.661156 gettimeofday({1165868290, 661184}, NULL) = 0 14:18:10.661308 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:10.661496 gettimeofday({1165868290, 661522}, {360, 0}) = 0 14:18:10.661623 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:10.661714 gettimeofday({1165868290, 661740}, NULL) = 0 14:18:10.661838 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:10.761025 gettimeofday({1165868290, 761052}, {360, 0}) = 0 14:18:10.761125 gettimeofday({1165868290, 761153}, NULL) = 0 14:18:10.761224 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:10.761412 gettimeofday({1165868290, 761438}, {360, 0}) = 0 14:18:10.761512 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:10.761596 gettimeofday({1165868290, 761622}, NULL) = 0 14:18:10.761720 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:10.861034 gettimeofday({1165868290, 861060}, {360, 0}) = 0 14:18:10.861162 gettimeofday({1165868290, 861188}, NULL) = 0 14:18:10.861286 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:10.861474 gettimeofday({1165868290, 861500}, {360, 0}) = 0 14:18:10.861574 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:10.861639 gettimeofday({1165868290, 861665}, NULL) = 0 14:18:10.861763 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:10.961020 gettimeofday({1165868290, 961047}, {360, 0}) = 0 14:18:10.961123 gettimeofday({1165868290, 961149}, NULL) = 0 14:18:10.961221 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:10.961425 gettimeofday({1165868290, 961452}, {360, 0}) = 0 14:18:10.961526 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:10.961591 gettimeofday({1165868290, 961617}, NULL) = 0 14:18:10.961714 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 99) = 0 14:18:11.060980 gettimeofday({1165868291, 61007}, {360, 0}) = 0 14:18:11.061107 gettimeofday({1165868291, 61133}, NULL) = 0 14:18:11.061231 poll([{fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=15, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=13, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=17, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=23, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=22, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=25, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=14, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=27, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=28, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=24, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=21, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=26, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=18, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=29, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=20, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=16, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 17, 0) = 0 14:18:11.061419 gettimeofday({1165868291, 61445}, {360, 0}) = 0 14:18:11.061546 waitpid(-1, 0xbf9686a8, WNOHANG) = 0 14:18:11.061612 gettimeofday({1165868291, 61638}, NULL) = 0 14:18:11.061735 poll( <unfinished .> Rian Booyer Library Systems Analyst Camden County Library District rian(a)ccld.us <http://www.ccld.us/> http://www.ccld.us Phone: 573-346-7733 Fax: 573-346-1263

2 3

[Dovecot] config files
by Farkas Levente 21 Dec '06

21 Dec '06

hi, now as dovecot can be more and more conf files it'd be better to move all of the to a same place under eg. /etc/dovecot/. or if this is a simple setup may be one /etc/dovecot.conf can be enough, but all other files in the examples and docs can point into /etc/dovecot/{sql.conf,acl,dict-quota.conf} etc. just my 2c. yours. -- Levente "Si vis pacem para bellum!"

2 1

[Dovecot] Dovecot release schedule
by Adrian Vasile 21 Dec '06

21 Dec '06

Hello list, Just a quick question, what is the release schedule for 1.0 ? It's been a couple (4+) of months now and still no sign of a production ready version. Is there a TODO list of features not yet implemented and/or of current bugs? Thanks, Adrian

4 4

[Dovecot] umask 007 ineffective with newly created Maildir message
by Steve James 20 Dec '06

20 Dec '06

This is for Dovecot 1.0.rc15 from Debian Backports on 3.1 Stable, x86; Filesystems are local reiserfs; IMAPs client is KMail 1.9.5 Non-default settings in dovecot.conf: protocols = imaps ssl_cert_file = /etc/dovecot/mail.cert.pem ssl_key_file = /etc/dovecot/mail.key.pem mail_location = maildir:/var/mail/ambrosia.plus.com/%n mail_extra_groups = mail first_valid_uid = 1000 first_valid_gid = 1000 umask = 007 maildir_copy_with_hardlinks = yes To reproduce:- 1. Using your IMAP client with two IMAP accounts, copy a message from a folder in one account, to a folder in the other account 2. See that the newly created message file is -rw------- If a message is moved between folders on the _same_ account, however, the group permissions are preserved (ie not masked off). So it seems that the umask option is ineffective when the imap daemon creates a new maildir message file. Thanks, Steve. -- BOFH excuse #400: We are Microsoft. What you are experiencing is not a problem; it is an undocumented feature.

1 0

[Dovecot] Unable to authenticate with Pam
by Patrick Begou 20 Dec '06

20 Dec '06

Hi, I'm trying to solve this problem for several weeks and this is a SOS! I've 2 Debian server runing heartbeat and drbd for high availability. I'm using LDAP for user database, PAM for authentication and Dovecot for Pop3s access. On the master server all is fine. If dovecot is started on the slave server (instead of the master) it does not accept to authenticate with the pam/ldap. Between the 2 servers there is just a release level of some filesets wich is different, but it do not concern dovecot, nor pam, nor ldap! I can provide a diff file. The problem occur if the ldap server is on the same node _and_ if it is on the other node. These are the messages : Dec 20 15:39:18 dean pop3-login: unable to dlopen /usr/lib/sasl2/libanonymous.so.2: /usr/lib/sasl2/libanonymous.so.2: failed to map segment from shared object: Cannot allocate memory Dec 20 15:39:18 dean pop3-login: unable to dlopen /usr/lib/sasl2/libplain.so.2: /usr/lib/sasl2/libplain.so.2: failed to map segment from shared object: Cannot allocate memory Dec 20 15:39:18 dean pop3-login: unable to dlopen /usr/lib/sasl2/liblogin.so.2: /usr/lib/sasl2/liblogin.so.2: failed to map segment from shared object: Cannot allocate memory Dec 20 15:39:18 dean pop3-login: unable to dlopen /usr/lib/sasl2/libntlm.so.2: /usr/lib/sasl2/libntlm.so.2: failed to map segment from shared object: Cannot allocate memory Dec 20 15:39:28 dean dovecot-auth: (pam_unix) check pass; user unknown Dec 20 15:39:28 dean dovecot-auth: (pam_unix) authentication failure; logname= uid=0 euid=0 tty= ruser= rhost=194.254.67.78 The library error messages occurs on the 2 servers wich have the same libsasl packages.libsaslA2, libsasl2-modules and sasl2-bin are at level 2.1.19-1.5sarge1 The tests I've ran: => The ldap server in runing (all computers of my network use it) => ldapsearch -x \ -D "uid=begou,ou=People,........." \ -W '(uid=begou)' userPassword works fine on this host whith my password. => I'm runing sendmail on the same host with sasl to authenticate on the ldap server and: testsaslauthd -u begou -p my-password works fine and sendmail authenticate. => I'm using PLAIN passwords with ssl. ssl is working with the test: openssl s_client -connect mostha2.hmg.inpg.fr:pop3s: CONNECTED(00000003) depth=0 /C=FR/ST=RA/L=Grenoble/O=LEGI/OU=MoST/CN=Dovecot/emailAddress=Patrick.Begou(a)hmg.inpg.fr verify error:num=18:self signed certificate verify return:1 depth=0 /C=FR/ST=RA/L=Grenoble/O=LEGI/OU=MoST/CN=Dovecot/emailAddress=Patrick.Begou(a)hmg.inpg.fr verify return:1 --- Certificate chain 0 s:/C=FR/ST=RA/L=Grenoble/O=LEGI/OU=MoST/CN=Dovecot/emailAddress=Patrick.Begou@hmg.inpg.fr i:/C=FR/ST=RA/L=Grenoble/O=LEGI/OU=MoST/CN=Dovecot/emailAddress=Patrick.Begou@hmg.inpg.fr --- Server certificate -----BEGIN CERTIFICATE----- MIIEgzCCA2ugAwIBAgIJAP3u4iOMcvbhMA0GCSqGSIb3DQEBBAUAMIGHMQswCQYD ..... cut ..... 5XFFP1f0AQ== -----END CERTIFICATE----- subject=/C=FR/ST=RA/L=Grenoble/O=LEGI/OU=MoST/CN=Dovecot/emailAddress=Patrick.Begou(a)hmg.inpg.fr issuer=/C=FR/ST=RA/L=Grenoble/O=LEGI/OU=MoST/CN=Dovecot/emailAddress=Patrick.Begou(a)hmg.inpg.fr --- No client certificate CA names sent --- SSL handshake has read 1321 bytes and written 468 bytes --- New, TLSv1/SSLv3, Cipher is AES256-SHA Server public key is 2048 bit SSL-Session: Protocol : TLSv1 Cipher : AES256-SHA Session-ID: C2F2FFA0..... cut ......456C194EE3D5F Session-ID-ctx: Master-Key: 31D764620903C00A..... cut ......4B7101909B3A84F Key-Arg : None Krb5 Principal: None Start Time: 1166628727 Timeout : 300 (sec) Verify return code: 18 (self signed certificate) --- +OK dovecot ready. If I use: USER begou PASS my-password dovecot answer: -ERR Authentication failed. If a use a local user (from /etc/passwd), ex: root , it works and dovecot connect the session. ------------------------------------------------ /etc/dovecot.conf ------------------------------------------------ protocols = imaps pop3s imaps_listen = xxx.xxx.xxx.xxx pop3s_listen = xxx.xxx.xxx.xxx login = imap login = pop3 first_valid_uid = 100 mail_extra_groups = mail default_mail_env = mbox:/services/_POP-IMAP/%d/%n/:INBOX=/var/mail/%u:INDEX=/services/_POP-IMAP/%d/%n/indexes/ auth = default auth_mechanisms = plain auth_userdb = passwd auth_passdb = pam dovecot auth_user = root auth_verbose = yes auth_debug = yes ------------------------------------------------ /etc/pam.d/dovecot ------------------------------------------------ auth required pam_ldap.so account required pam_ldap.so session required pam_ldap.so ------------------------------------------------ dpkg -l \*dovecot\* ------------------------------------------------ ii dovecot-common 0.99.14-1sarge0 ii dovecot-imapd 0.99.14-1sarge0 ii dovecot-pop3d 0.99.14-1sarge0 Thanks for your help Patrick -- =============================================================== | Equipe M.O.S.T. | http://most.hmg.inpg.fr | | Patrick BEGOU | ------------ | | LEGI | mailto:Patrick.Begou@hmg.inpg.fr | | BP 53 X | Tel 04 76 82 51 35 | | 38041 GRENOBLE CEDEX | Fax 04 76 82 52 71 | ===============================================================

1 0

Re: [Dovecot] Odd Error: Expecting '='
by Patrick Rutkowski 20 Dec '06

20 Dec '06

Ok, so now I have 1.0 running. That error I had before went away, but now I have a new error. When I do "USER user(a)foo.org" over a telnet to dovecot on my test server I get "-ERR Plaintext authentication disabled." as a response. This is puzzling because in dovecot- sql.conf I have "default_pass_scheme = PLAIN" and in dovecot.conf in the auth default {} section I have "mechanisms = plain" I wrote the configs from scratch this time, so they are very short; there they are in their entirety: === dovecot.conf === ssl_disable = yes protocols = pop3 pop3s default_mail_env = maildir:~/ auth default { mechanisms = plain login passdb sql { args = /opt/dovecot/etc/dovecot-sql.conf } userdb sql { args = /opt/dovecot/etc/dovecot-sql.conf } } === dovecot-sql.conf === driver = pgsql connect = host=localhost dbname=mails user=mailreader password=secret default_pass_scheme = PLAIN password_query = SELECT password FROM users WHERE userid = '%u' user_query = SELECT '/home/'||home AS home, uid, gid FROM users WHERE userid = '%u' On Dec 19, 2006, at 10:48 PM, Patrick Rutkowski wrote: > Shoot, I'm using 0.99.14. I should have known Debian was a version > behind (it always is). I'll compile 1.0 by hand and give it a shot, > I hear the configs go by different rules in 1.0. Thanks for > alerting me about the version. > > I'll let you know how it goes with 1.0, > Patrick > > On Dec 19, 2006, at 10:11 PM, Curtis Maloney wrote: > >> Patrick Rutkowski wrote: >>> Any clues would be much appreciated, >> >> A clue to which version of Dovecot you're using would also be >> welcomed... >> >> -- >> Curtis Maloney >> cmaloney(a)cardgate.net >> >

1 1

[Dovecot] Odd Error: Expecting '='
by Patrick Rutkowski 20 Dec '06

20 Dec '06

Hi all, I'm working on setting up dovecot on a test system. When I try to start dovecot I get this error: Fatal: Error in configuration file /etc/dovecot/dovecot.conf line 504: Expecting '=' Line 504 in my config is this: auth default { passdb sql { args = /usr/local/etc/dovecot-sql.conf } userdb sql { args = /usr/local/etc/dovecot-sql.conf } } I don't see how that can be wrong because the dovecot docs mention exactly such a structure and I used the same syntax: http:// wiki.dovecot.org/BasicConfiguration Any clues would be much appreciated, Patrick P.S. My entire config can be found here: http://www.rutski89.com: 31597/upload/dovecot.txt

1 0

[Dovecot] dovecot with pam -> nss_ldap seems to work fine
by Jorge Salamero Sanz 19 Dec '06

19 Dec '06

hi all, some time ago i remember have had read (on the wiki) that dovecot couldn't work with pam against nss_ldap but i've build a setup using etch's dovecot rc15 and seems to work fine until now thru the server has a low usage (50 users). congratulations for such a nice imap server :)

3 2

[Dovecot] mbox somewhere else?
by Tolga 19 Dec '06

19 Dec '06

Hi, I want to store my folders somewhere else, it used be in ~/mail. Is this as easy as moving everything in ~/mail to /var/mail/ and editing /etc/dovecot/dovecot.conf to read mail_location=mbox:~/mail:INBOX=/var/mail/%u ? Also, is the syntax mail_location=mbox:/var/mail/%u-folders:INBOX=/var/mail/%u correct? Regards, -- Whatever it is, I fear Greeks even when they bring gifts. -- Publius Vergilius Maro (Virgil)

1 0

[Dovecot] rc15 in FC6
by Axel Thimm 19 Dec '06

19 Dec '06

Hi, just a note that FC6 now has the very latest of dovecot as an official update. :) It will upgrade the atrpms packages automatically to the official vendor version, there is nothing you need to take care of. -- Axel.Thimm at ATrpms.net

2 1

[Dovecot] Solaris NFS woes
by John Harper 18 Dec '06

18 Dec '06

I am using dovecot 1.0.rc15 (a similar problem occurred in rc10) on Solaris 9 (sparc). When working with a user who's home dir is on a local disk everything seems fine. But when that home is on an NFS-mounted disk things are very badly awry. Both the indices and the subscriptions file are being destroyed and what is left behind are files with names of the form .nfs72C034 etc. These files are described in the shell script nfsfind - every Solaris system ships with a root cron to run nfsfind and delete stale files: # These files are created by NFS clients when an open file # is removed. To preserve some semblance of Unix semantics # the client renames the file to a unique name so that the # file appears to have been removed from the directory, but # is still usable by the process that has the file open. I dont't see why dovecot would be unlink'ing it's active files while running - but I actually managed to see the dovecot.index.log appear briefly and then change to a .nfsXXXX file during the test user login. dovecot.index always seems to exist correctly but from local tests I know there should be a dovecot-uidlist, dovecot.index.cache, dovecot.index.log too, and these all appear to be .nfsXXXX files I can't seem to find anything relating to this specific problem in the archives, although these files have been mentioned a few times. And yes I do have mmap_disable = yes (but that is only relevant to the indexes, and the same thing is happening to the subscriptions file - ie some common library code for dealing with files has an issue) I should also note that these NFS mounts have been in existence for years and lots of things are running through them, so there shouldn't be anything wrong there. Suggestions, please? Thanks, John Harper ------------------------------------------------- Senior Systems Administrator Information and Instructional Technology Services University of Toronto Scarborough harper(a)utsc.utoronto.ca

4 4

[Dovecot] [PATCH] don't force read bit on base_dir
by Max Kellermann 18 Dec '06

18 Dec '06

Hi, I would like to disallow dovecot to read its base_dir (mode 0310). This is currently not possible, because settings_verify() in src/master/master-settings.c will "fix" the directory mode to 0750. The following patch for 1.0rc15 ignores the read bit (0444) when checking the directory permissions. Max

2 1

Re: [Dovecot] Problems with Mailstorage path.
by Raja T Nair 17 Dec '06

17 Dec '06

Hi, I have created symlinks to all the mail folders with caps in their name. but that does not solve the issue. If a user types in mixed case username( e.g. RtNaiR for rtnair ), dovecot creates a new mailfolder for that username; Is there a way to instruct dovecot not to create a mailbox and throw an error if the folder does not exist? raja. On 12/12/06, Kenny Dail <kend(a)amigo.net> wrote: > > > > Currently I've configured dovecote to find user's mail folder like this: > > > > dovecot.conf > > > > mail_location = maildir:/var/vmail/%d/%u/Maildir > > > > > > Thats a good setup. For simplicity's sake, why not use it? > > > > :) yes i agree. but the problem is that some of the existing ldap > > entries need to be changed. there are more than 15,000 mailboxes and > > problem users are randomly distributed. currently i'm using > > courier-imap and it perfectly lands each user in his/her own mailbox. > > the only problem i find with courier is that it becomes sluggish at > > peak hours. > I'll admit I'm ignorant in matters of ldap, is it really very hard to > pull a list of all aberrant entries? With only 15000 total accounts, > even if they all needed correcting, it wouldn't take very long to > symlink them all. > > -- > Kenny Dail <kend(a)amigo.net> > > -- +91 944 715 5548(Cell)

2 1

[Dovecot] On vacation message
by arto.saraniva＠artio.net 17 Dec '06

17 Dec '06

Hello, I am away from office and will read my emails again on sunday 17th December. Regarding urgent issues, please contact info(a)artio.net. Best Regards, Arto Saraniva Artio Oy

1 0

[Dovecot] 1.0 Release?
by John Gray 16 Dec '06

16 Dec '06

Timo, What are you thoughts on when we might see 1.0? Thanks, John -- John Gray gray(a)agora-net.com AgoraNet, Inc. (302) 224-2475 314 E. Main Street, Suite 1 (302) 224-2552 (fax) Newark, De 19711 http://www.agora-net.com

7 6

[Dovecot] Proxy MD5/NTLM requests not working
by Cassidy B. Larson 16 Dec '06

16 Dec '06

Having some problems with setting up a proxy with any authentication mechanisms other than PLAIN. My passwords are stored in my database in plaintext (and MD5), so I figure I could use whatever scheme I want. Using the latest RC15. MySQL for the backend. This first one is CRAM-MD5. It fails (scheme_r != NULL??) then PLAIN tries to take over, but the auth server is restarting: Info: auth(default): client in: AUTH 1 CRAM-MD5 service=POP3 secured lip=204.x.x.x rip=209.x.x.x resp= Info: auth(default): client out: CONT 1 PDA1MTA2OTcxNzY0NjA1MTAuMTE2NjIwMjUxNkBtYXJiZWxsYS5pbmZvd2VzdC5jb20+ Info: auth(default): client in: CONT 1 YnV0Y2hAaW5mb3dlc3QuY29tIDBhNGNjNDJlN2QxOWI4ZjlkYjk0MjE2OTgxOGVmM2Ri Error: auth(default): file passdb-cache.c: line 120 (passdb_cache_lookup_credentials): assertion failed: (*scheme_r != NULL) Error: child 63406 (auth) killed with signal 6 Info: pop3-login: Authenticate PLAIN failed: Authentication failed: Authentication server isn't connected, try again later..: method=PLAIN, rip= 209.x.x.x, lip=204.x.x.x, TLS After this I tried adding this line to my Proxy dovecot-sql.conf file since the Destination already had it: default_pass_scheme = plain When I try connecting now, I get this: Info: auth(default): client in: AUTH 1 CRAM-MD5 service=POP3 secured lip=204.x.x.x rip=209.x.x.x resp= Info: auth(default): client out: CONT 1 PDg1NDgyMTgxOTgyNzI0NDIuMTE2NjIwMzg2MkBtYXJiZWxsYS5pbmZvd2VzdC5jb20+ Info: auth(default): client in: CONT 1 YnV0Y2hAaW5mb3dlc3QuY29tIDIzM2FjODE3NmMwNzZkNWE1MmZhNzdhNDJlODVmMjAy Info: auth-worker(default): sql(user(a)host.com,209.x.x.x): query: SELECT NULL AS password, v.storeIP AS host, v.userID AS destuser, 'Y ' AS nologin, 'Y' AS nodelay, 'Y' AS proxy FROM virtmailbox AS v WHERE v.userID = 'user(a)host.com' and v.imap_active = 1 Error: auth-worker(default): file passdb.c: line 120 (passdb_handle_credentials): assertion failed: (password != NULL) Error: child 69536 (auth-worker) killed with signal 6 Info: auth(default): client out: FAIL 1 user=user(a)host.com temp This last error is the same that I get when trying NTLM. Now, the password should be NULL, since I dont want to do any authentication on the Proxy, but simply forward it off to let the destination host handle it. Now the host that the proxy sends it off to works fine when I connect to it directly. I have the same default mechanisms allowed on both Proxy and destination. Anybody have any clues? I'd really like to figure out how to proxy "secure password" requests to my destination server without having to rely on plaintext. Plaintext works fine with the proxy, but I am unable to get anything else working. Am I overlooking something obvious? Thanks, Cassidy

2 1

[Dovecot] Trash and quota
by Kenny Dail 16 Dec '06

16 Dec '06

I can't seem to find the magic combination to get dovecot to ignore the trash folder when counting quota. I've got 1.0rc15 and using maildir quotas. Not being able to trash messages when over quota is quite annoying. the docs suggest the following: plugin { quota = maildir:storage=10240:ignore=Trash } but as my quotas are defined per user via mysql DB, I'm thinking that I need a modified version such as: plugin { quota = maildir:ignore=Trash } Which does not work. just in case it's a semantic problem, I also tried: plugin { quota = maildir:ignore=INBOX.Trash } which also doesn't work. I need other ideas of what to try to make it work if you please. -- Kenny Dail <kend(a)amigo.net>

4 5

[Dovecot] On vacation message
by arto.saraniva＠artio.net 15 Dec '06

15 Dec '06

Hello, I am away from office and will read my emails again on sunday 17th December. Regarding urgent issues, please contact info(a)artio.net. Best Regards, Arto Saraniva Artio Oy

1 0

Re: [Dovecot] Dovecot "open files" (again?)
by falz 15 Dec '06

15 Dec '06

On 12/15/06, Ejay Hire <ehire(a)cbrweb.com> wrote: > > I'm looking at this too, for me it isn't releasing all of the index files consistently. > Two questions. > > 1. I have a dumb question. Does FreeBSD allow you to see /set the # of files a process can open with ulimit? Yep, in FreeBSD it's just "limits" which gives: Resource limits (current): cputime infinity secs filesize infinity kb datasize 524288 kb stacksize 65536 kb coredumpsize infinity kb memoryuse infinity kb memorylocked infinity kb maxprocesses 5547 openfiles 22190 sbsize infinity bytes vmemoryuse infinity kb 22190 is double the default. When I'm running without the issue (quota = dirsize) the # of open files is generally around 5k: # sysctl kern.openfiles kern.openfiles: 4910 When I change it, I can get it to go as high as I want (I then change dovecot back to dirsize for quota) sysctl kern.openfiles kern.openfiles: 19906 > 2. can you do an lsof (ls open files) and send that (zipped!!) over so I can see what it has open? I just tried, but being a busy time right now, doing "lsof -p [PID] > lsof.txt" never returns before the # of open files gets maxed and the server goes to hell. I'll have to try again at a slower time to see if it will return- right now's about the busiest time of day on this box. Is there anything in particular you're looking for in there? Most of the lines are similar to the ones in the attached (small!) text file. Thanks, falz

1 0

[Dovecot] considering dovecot
by Rick Hazey 15 Dec '06

15 Dec '06

Hi all. I'm making a case to use Dovecot over Courier and would like some feedback. I've searched the web extensively and have been unable to find any hard information regarding Dovecot's IMAP performance. I've got some pressure to use Courier but my gut tells me that Dovecot should be much faster. In particular, I will have typical users with mailboxes exceeding 10,000 emails and in some cases up to 100,000. Courier might be the "safe" choice but I'm not confident it can handle inboxes with that many messages. Dovecot, with its indexes, should be much, much faster. Can anyone point me to some benchmarks or production uses of dovecot that bear this out? From my research, Courier maildrop appears to be what I need for local delivery. Is it possible to use Maildrop for local delivery with Dovecot? Or is the Dovecot LDA needed to update the maildir indexes? I also need the capability for users to set their own vacation messages via a web page. Maildrop looks to handle this easily (by allowing me to link the maildrop filter to a file with the vacation message) but I don't see similar capability with the Sieve plugin. I do see where I can create a vacation message with Sieve but the text of the message seems to be required to reside within the Sieve script. Perhaps I'm missing something? Any feedback would be greatly appreciated.

12 21

[Dovecot] testing my filter - ignore
by "M. Tolga Özses" 15 Dec '06

15 Dec '06

-- Per rinvigorirmi un po', [il dottore] mi ha mandato a fare i massaggi, li' nelle parti basse... E' arrivata un'infermiera con due braccia cosi', che ha iniziato a massaggiare, tirare, spostare... Un dolore! Alla fine le ho detto: "Signora, faccia un po' di attenzione! Magari per lei e' uno dei tanti, ma per me e' l'unico!". -- Commendator Attilio Bossolazzi (Giorgio Faletti)

1 0

Re: [Dovecot] Full text search indexing
by Bill Boebel 15 Dec '06

15 Dec '06

On Sat, December 9, 2006 8:05 pm, Timo Sirainen <tss(a)iki.fi> said: > As I've explained a couple of times already, IMAP RFC says that searches > are done by matching substrings, so the Lucene backend isn't fully RFC > compliant. Currently it's anyway used to optimize standard SEARCH > BODY/TEXT rules, but I'll probably make it optional and instead add new > X-NONEXACT-BODY/TEXT rules. Then it will be possible to use both Lucene > and Squat backends to optimize different searches (eg. Lucene for your > modified webmail and Squat for standard IMAP clients). Very cool. Will searches other than BODY and TEXT use Lucene, Squat or the normal Dovecot indexes?... such as SEARCH SUBJECT/TO/CC/FROM/HEADER Bill

2 1

[Dovecot] problem on "multiple addresses"
by Quentin Chung (KTS) 15 Dec '06

15 Dec '06

I have do a search on google but found nothing.. My configuration is: RH ES3 Dovecot 1.0.0.4 from atrpms (dovecot-1.0-0_4_stable20050221.el3.at) My problem is.. my mailbox has 2 internet (interface A, ip 1.2.3.4 and interface B, 9.8.7.6) and 1 intranet (interface C, 192.168.0.x) access. Default route is on interface A. pop3/imap access from connection A & C has no problem at all. But, any connection from interface B it will get a timeout error. I can sure routing is correct.. since I have virtual host on web server and running ftp server, I tested it connecting from both IP it shows no error.. Anyone can give me some hints to fix it ?? thanks in advance.

2 1

[Dovecot] dovecot's LDA agent
by Bartosz Giza 15 Dec '06

15 Dec '06

Hi! I am using courier IMAP with maildrop as LDA. I started reading about dovecot and i like started to feel that i can switch to it. I have couple questions mostly about dovecot's LDA. My main problem with maildrop is that i have to create manualy user directories grr. All my domains are set up as virtual with postfix. So when i add new accout thru my web panel and i have to create user dir manually. This is really annoying thing. Maildrop checks if there is user dir before delivering mail. If not it report error. I want to know if dovecot's LDA create automaticly user dirs or not. I need also filtering language in LDA and i kknow that LDA has option to use sieve scrips. Generaly i am not sure that dovecot will be a good choice to switch from courier. Could anybody help me ? -- best regards, Bartosz Giza

2 1

[Dovecot] Error in Thunderbird
by Luigi Rosa 15 Dec '06

15 Dec '06

I received a mail, Thunderbird was supposed to move that mail in a folder, according to its filter rules, but appeared this popup: http://luigi.rosa.name/dovecot1.gif The log entries are: Dec 14 07:23:07 mail dovecot: IMAP(lrosa): Fixed index file /var/spool/mail2/lrosa/.HT list/dovecot.index: first_recent_uid_lowwater 839 -> 838 Dec 14 07:23:07 mail dovecot: IMAP(lrosa): Corrupted index file /var/spool/mail2/lrosa/.HT list/dovecot.index: Duplicate header extension keywords The file http://luigi.rosa.name/dovecot1.tgz contains the dovecot files I found in the folder "HT list" (no problem about privacy: the archives of that mailing list are public). Ciao, luigi -- / +--[Luigi Rosa]-- \ There ain't no such thing as a free lunch.

2 1

[Dovecot] Shared folder subscriptions
by Nagy László 15 Dec '06

15 Dec '06

Hello! I have this shared folder: namespace public { separator = / prefix = Public/ location = maildir:/var/mail/public } It is accessible for all users in a specific group (mode 770, umask 0007). Users in that group should always be subscribed to all subfolders, so I did not use a different CONTROL for each user. All of our IMAP users were in that group, until now. I added a new user and she should not be able to access the public folder. She is not in the right group, so everything is okay, except that her e-mail client TRIES to open Public. It is because she is also subscribed to that folder. My question is: is it possible to have different control files for different groups of users? Having a different control file for each user would not be good for me, it would cause lot trouble. Having the same control file for all users is also bad, I would get many complaints because error messages would show up. In the worst case I can write a script that automatically subscribes everybody to the correct folders, but this would be very clumsy. Any ideas? Thanks, Laszlo

2 1

[Dovecot] On vacation message
by arto.saraniva＠artio.net 14 Dec '06

14 Dec '06

Hello, I am away from office and will read my emails again on sunday 17th December. Regarding urgent issues, please contact info(a)artio.net. Best Regards, Arto Saraniva Artio Oy

1 0

[Dovecot] Actually what is the SQL DB used for?
by Aaron J Weber 14 Dec '06

14 Dec '06

Is a RDBMS required for Dovecot to run in small (SOHO) environments? (Does it store indexes to the mail, etc.?) Or is it strictly leveraged for larger-scale environments? I'm asking, because the INSTALL says ./configure and make is enough for most...but as my previous post requested...there isn't anywhere that lists Required Packages/Software. We need to get that out there before 1.0RC becomes 1.0! :) -AJ

2 1

[Dovecot] On vacation message
by arto.saraniva＠artio.net 13 Dec '06

13 Dec '06

Hello, I am away from office and will read my emails again on sunday 17th December. Regarding urgent issues, please contact info(a)artio.net. Best Regards, Arto Saraniva Artio Oy

1 0

[Dovecot] New script mdsmon
by Antonio Casado Rodríguez 13 Dec '06

13 Dec '06

Hi all, I have created mdsmon (MailDirSize Monitor) script modifying postmmon (POSTfix Mbox Monitor) script of Ricardo Malafaia. Features: - It works with maildirsize file of users. (all inbox folders in one directory). - It sends alert and warning mails to users if quota is above 50% or 85%. - It creates accounting file. All the suggestions and errors are welcome: http://www.ual.es/personal/acasado/mdsmon/ Thanks.

1 0

[Dovecot] Slightly off topic question but ...
by Marc Perkel 13 Dec '06

13 Dec '06

I'm using files for passwords that look like the unix passwd and shadow files, except each domain has it's own pair of shadow and password files for that domain. And dovecot works fine with that. So - here's my off topic question. I'm trying to create a PHP interface to allow user to change their password in these passwd / shadow file combos. What kind of encryption do they use and specifically what PHP command would I use to encrypt a password like the shadow file has? Thanks in advance.

4 3

[Dovecot] Recipient delimiters, deliver and SQL databases
by Nils Vogels 13 Dec '06

13 Dec '06

Hi! As a new user, I'm trying to set up a postfix + dovecot combination, and so far all is running smoothly. I'm using the guidelines that came with postfix and adjusting them as I go. My user and alias database is stored in MySQL, using the scheme from 'PostfixAdmin' (http://high5.net/page9.html) and I am using the dovecot LDA 'deliver' to drop messages into mailboxes that exist solely as virtual users. Users can login using both pop3 and imap, and retrieve the e-mails sent directly to them, so I'm happy with that. One of the features supported by postfix, and required for my setup is recipient delimiters. Using recipient delimiters, you can basically send extra information in the e-mail address, to maybe deliver the message into subfolders directly, or to run anti-spam software such as TMDA against. When I try to deliver such a message, I get a user unknown: Dec 9 14:25:01 vm-mail postfix/pickup[91477]: 4574A6420: uid=0 from=<root> Dec 9 14:25:01 vm-mail postfix/cleanup[91487]: 4574A6420: message-id=<20061209142501.4574A6420(a)vm-mail.mydomain> Dec 9 14:25:01 vm-mail postfix/qmgr[91478]: 4574A6420: from=<root(a)vm-mail.mydomain>, size=290, nrcpt=1 (queue active) Dec 9 14:25:01 vm-mail dovecot: auth(default): master in: USER 1 user+test@mydomain service=deliver Dec 9 14:25:01 vm-mail dovecot: auth-worker(default): sql(user+test@mydomain): SELECT maildir, 143 AS uid, 143 AS gid FROM mailbox WHERE username = 'user+test@mydomain' AND active = '1' Dec 9 14:25:01 vm-mail dovecot: auth-worker(default): sql(user+test@mydomain): User not found Dec 9 14:25:01 vm-mail dovecot: auth(default): master out: NOTFOUND 1 Dec 9 14:25:01 vm-mail postfix/pipe[91489]: 4574A6420: to=<user+test@mydomain>, relay=dovecot, delay=0.14, delays=0.07/0.03/0/0.04, dsn=5.1.1, status=bounced (user unknown) Relevant snippets from postfix's master.cf: # Dovecot LDA dovecot unix - n n - - pipe flags=DRhu user=dovecot:dovecot argv=/usr/local/libexec/dovecot/deliver -d ${recipient} and postfix's main.cf: virtual_gid_maps = static:143 virtual_mailbox_base = /mail/virtual virtual_minimum_uid = 125 dovecot_destination_recipient_limit = 1 virtual_transport = dovecot virtual_uid_maps = static:143 and dovecot's dovecot.conf: protocol lda { postmaster_address = postmaster@mydomain sendmail_path = /usr/sbin/sendmail auth_socket_path = /var/run/dovecot-auth-master } auth default { passdb sql { args = /usr/local/etc/dovecot-mysql.conf } userdb sql { args = /usr/local/etc/dovecot-mysql.conf } socket listen { client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } master { path = /var/run/dovecot-auth-master mode = 0600 user = dovecot group = dovecot } } } And offcourse dovecot-mysql.conf: # Database driver: mysql, pgsql driver = mysql # Currently supported schemes include PLAIN, PLAIN-MD5, DIGEST-MD5, and CRYPT. default_pass_scheme = CRYPT # Database options connect = host=myhost dbname=mydb user=myuser password=mypass password_query = SELECT password FROM mailbox WHERE username = '%u' AND active = '1' user_query = SELECT maildir, 143 AS uid, 143 AS gid FROM mailbox WHERE username = '%u' AND active = '1' #EOF Now, I am pretty sure the problem lies with the %u, expanding to user+test@mydomain, which in some way should become user@mydomain, since the latter is the actual mailbox name of the user, but: how? Thanks in advance, Nils -- Those who desire to give up freedom in order to gain security, will not have, nor do they deserve, either one. ~Benjamin Franklin (American Statesman, Scientist, Philosopher, Printer, Writer and Inventor. 1706-1790)

3 7

Re: [Dovecot] Problems with Mailstorage path.
by Kenny Dail 12 Dec '06

12 Dec '06

> Currently I've configured dovecote to find user's mail folder like this: > dovecot.conf > mail_location = maildir:/var/vmail/%d/%u/Maildir Thats a good setup. For simplicity's sake, why not use it? > > All my domain mailboxes are under /var/vmail, as evident. But there > are some users whose mail folders are directly under /var/vmail like > this one: > /var/vmail/myuser1(a)mydomain1.com > Move or symlink them. Maintenance and migration is a lot easier if you use a uniform layout. -- Kenny Dail <kend(a)amigo.net>

2 1

[Dovecot] dovecot imap mbox multiple connections
by Danni Allen 12 Dec '06

12 Dec '06

Hi, The company that I work for are currently looking at a changeover in clients from pegasus mail(v4) to Thunderbird (v1.5.0.8). We run dovecot (v 0.99.13) with mbox. We currently have a bunch of shared folders sitting in a dummy imap account that they all connect to and view. I have read that problems with Thunderbird have been encountered with this setup due to multiple connections to the account and that a possible solution is to convert from mbox to maildir. I was simply wondering if anyone knows anything about this, as I don't seem to be able to find any information on it other than a single thread with a single comment with what seems like anecdotal evidence rather than something acknowledged. Is there a problem with this? Rgds, Danni Allen

2 2

Re: [Dovecot] dovecot+exim4+thunderbird+shared-folders-with-links+permissions-problems
by Uwe Fechner 11 Dec '06

11 Dec '06

Eric, thanks, works fine now, the debian package is updating only the pop3d and not the imapd. Needed to install it seperately. Uwe Eric schrieb: > Uwe Fechner wrote: >> Eric, thanks, >> >> upgraded to 1.0.rc15 >> but still the same issue. >> >> Uwe >> >> Eric schrieb: >>> Uwe Fechner wrote: >>>> Hello, >>>> >>>> I'm using 0.99.14 with debian 2.6.8-2-386 #1 Tue Aug 16 12:46:35 >>>> UTC 2005 i686 GNU/Linux and >>>> exim4. >>>> >>> first thing you need to do is update to rc15 and try again. old >>> versions are not supported and tons of issues have been fixed since >>> the .99 releases >> > now is when the list will get involved =)

1 0

[Dovecot] dovecot+exim4+thunderbird+shared-folders-with-links+permissions-problems
by Uwe Fechner 11 Dec '06

11 Dec '06

Hello, I'm using 0.99.14 with debian 2.6.8-2-386 #1 Tue Aug 16 12:46:35 UTC 2005 i686 GNU/Linux and exim4. I use the shared folder with symlinks, created by the script create_dovecot_shares-1.06. I have set the permissions and use umask 0007 on dovecot and in exim in maildir_home: directory_mode = 0770 mode = 0660 every thing works well, but if I'm moving a mail from my inbox with thunderbird into the shared mailbox it gets permissions -rw------- 1 user group 11811 2006-12-09 12:58 1165785386.P10056Q2M666099.blupp:2,Sa instead of -rw-rw---- 1 xxx group 31970 2006-12-10 17:26 1165767986.H344527P28279.blupp:2,Sb What am I doing wrong? kind regards Uwe

2 1

[Dovecot] 'NO' 'Unknown error'
by Nagy László 11 Dec '06

11 Dec '06

Dear List, I'm writting a program in Python that connects to a dovecot server and copies/moves messages across different shared folders. The program throws an error while executing this IMAP command: UID COPY 232 Archive/Notifications The same program works fine with other directories and messages. This is the response from the dovecot server: ('NO', ['Unknown error']) Do you have an idea what is the problem? This error message is very cryptic, it does not tell anythig about what is causing the problem and how to fix it. By the way, I'm using dovecot-1.0.r7_2 on FreeBSD 6.1-RELEASE. I cannot upgrade to a newer - I had to downgrade to r7 before because dovecot did not find the inboxes of my POP3s users. (But it did find the same inboxes for my IMAPs users.) Thanks, Laszlo

1 1

[Dovecot] Using custom Maildir subfolders with pop3 deliveri
by Bojan Popovic 11 Dec '06

11 Dec '06

Greetings, I am trying to make my antispam protection on user basis. So I need something like .junkmail folder in every user maildir. But the problem I am having is that my mail client can not download mail put in .junkmail folder. I am usin POP3 only, Maildir mailboxes (default_mail_env = maildir:/var/mail/%u) and whether I make folder with leadin dot or not it is never shown in mail client. Sincerely I don`t even know if it is posible with POP3, but it would be very hard converting to IMAP at this moment. Thanks in advance.

2 1

[Dovecot] Problems with Mailstorage path.
by Raja T Nair 11 Dec '06

11 Dec '06

Hi all, my environment: dovecot-1.0.rc15 Fedora Directory Server 1.0.2 Currently I've configured dovecote to find user's mail folder like this: dovecot.conf mail_location = maildir:/var/vmail/%d/%u/Maildir All my domain mailboxes are under /var/vmail, as evident. But there are some users whose mail folders are directly under /var/vmail like this one: /var/vmail/myuser1(a)mydomain1.com also, some have their folder names starting with caps like: /var/vmai/mudomain1.com/Myuser1(a)mydomain1.com This creates problems when these users try to login. Here I want dovecote to kind of assemble the mail storage path from mailMessageStore ldap attribute of the particular user. i.e, dovecot should add the mailMessageStore attribute's value to /var/vmail. Can somebody help me in solving this issue? regards, raja. -- +91 944 715 5548(Cell)

2 1

[Dovecot] Huge IMAP folder takes forever
by Peter Lindgren 10 Dec '06

10 Dec '06

Hi! Just updated to 1.0 rc15, but the problem remains. I think it could be client-dependent to some extent. I have only IMAPS access and Maildir. I have one mailbox which contains some 10,200 mails. That mailbox takes forever (have waited 30 minutes and then aborted) to open with Thunderbird 1.5.0.7. Other mailboxes (like dovecot :-), only 6984 mails) opens quickly. When Thunderbird tries to open this folder, the imap process on the server uses roughly all cpu resources. There isn't much disk I/O, at least as far as I can tell by listening at the server. The dovecot is upgraded from 0.99.something. Should I remove index files first, and in that case which? Is there something cached in Thunderbird? Here's the directory listing for the troublesome folder: -rw------- 1 peter peter 28 Jan 7 2006 .customflags -rw------- 1 peter peter 49248 Feb 7 2006 .imap.index -rw------- 1 peter peter 420998 Feb 7 2006 .imap.index.data -rw------- 1 peter peter 10256 Feb 7 2006 .imap.index.log -rw------- 1 peter peter 49200 Feb 7 2006 .imap.index.tree drwx------ 2 peter peter 686592 Dec 10 15:06 cur -rw------- 1 peter peter 64 Jun 6 2006 dovecot-keywords -rw------- 1 peter peter 619832 Dec 10 15:04 dovecot-uidlist -rw------- 1 peter peter 162992 Dec 10 15:21 dovecot.index -rw------- 1 peter peter 8826880 Dec 9 15:36 dovecot.index.cache -rw------- 1 peter peter 33776 Dec 10 15:22 dovecot.index.log -rw------- 1 peter peter 193660 Dec 3 12:50 dovecot.index.log.2 drwx------ 2 peter peter 512 Dec 10 15:06 new drwx------ 2 peter peter 512 Dec 10 15:04 tmp Thanks in advance, Peter -- Peter Lindgren, dataingenjör E-post: peter "at" norrskenkonsult punkt com http://www.norrskenkonsult.com

1 2

[Dovecot] Configuring for virtual users
by Gerard Seibert 10 Dec '06

10 Dec '06

I haven't tried this yet; however, I would like to know if it would work. Using Postfix, I am setting up numerous virtual users. These users obviously do not have an account on the mail server. I have created a "domain.net" account. Assuming that Postfix is properly set up to deliver to the specified accounts, which will be held under the "domain.net" directory, will this work in the dovecot.conf file: # default_mail_env = maildir:/var/mail/%d/%u or do I need to modify it somehow? -- Gerard

2 1

[Dovecot] Full text search indexing
by Timo Sirainen 10 Dec '06

10 Dec '06

There are now two full text search backends in CVS HEAD: - squat: My own full text search index based on ideas from Cyrus Squat indexes. Supports substring searches. - lucene: Uses CLucene library. It should be pretty easy to add support for more backends. As I've explained a couple of times already, IMAP RFC says that searches are done by matching substrings, so the Lucene backend isn't fully RFC compliant. Currently it's anyway used to optimize standard SEARCH BODY/TEXT rules, but I'll probably make it optional and instead add new X-NONEXACT-BODY/TEXT rules. Then it will be possible to use both Lucene and Squat backends to optimize different searches (eg. Lucene for your modified webmail and Squat for standard IMAP clients). The Squat index finally worked better than I thought. It has two limitations: - Search strings must be at least 4 characters long - Those 4 characters can't contain spaces So eg. searching for "ip add" doesn't work, but "ip addr" does. By "doesn't work" I mean it fallbacks to the slow old way of going through all the mails. The space limitation exists only because I thought that such searches are going to be rare, and this reduces the index size by 20-50%. So the Squat indexing works by looking at 4 character blocks. So when searching for "address": - Get a list of UIDs for "ress" - Filter out UIDs which don't appear for "dres" - The same for "ddre" and "addr" - Open all the messages that are left in the UID list and drop out the messages where the whole "address" word doesn't exist. I think searching the words backwards usually finds fewer hits and makes the search faster. As for the index sizes, indexing my dovecot mbox with 7495 messages and size of 32479980 bytes it produced: dovecot.index.search : 2166526 bytes dovecot.index.search.uids : 6074155 bytes So that's about 25% of the mailbox size. Last I checked, Cyrus Squat took about 120% (with different messages). Anyway as you can see the uids file is larger than the search trie file, so the number of messages is more important in determining the index size than the number of bytes. The initial index build is pretty slow, but adding new messages to the existing index should be pretty fast. The new messages aren't indexed until client does a SEARCH BODY/TEXT. I'm not sure if the messages should be optionally indexed immediately as they're seen (or even added by Dovecot LDA). Oh and another difference to Cyrus Squat is that Dovecot's version indexes 16bit characters and not bytes. So non-English messages get indexed much more nicely. If you want to try this yourself, you'll need to add: protocol imap { .. mail_plugins = fts fts_squat } plugin { fts = squat }

1 0

Re: [Dovecot] Blocked
by Joseph Tam 09 Dec '06

09 Dec '06

On Fri, 8 Dec 2006, dovecot-request(a)dovecot.org wrote: > Date: Fri, 08 Dec 2006 12:33:04 +0100 > From: Jos Chrispijn <jos(a)webrz.net> > Subject: Re: [Dovecot] Blocked > > ... > I block pop3 to force my users to use webmail (that is in fact using IMAP). > What mechanism should trigger sending a message that pop3 is blocked? > Once this message is send, it is either send by postfix to alternative > email account (Postfix forward) or just read once thru Webmail. In the > mean time this user is trying to establish pop3 on a 24/7 basis $-) If you are not selective on which users get the message (i.e. you want this notice to go out to all POP users), then you can do what the previous poster said and make a read-only mailbox and redirect the user's INBOX to this file (via symlinks, or dovecot.conf or what-have-you). This is probably the easier route. Another easy solution might to use tcp-wrappers and reply to all connections to port 110 with -ERR Please contact ... Some (most?) mail readers will pop this message to the user. Another solution which I employed (for another reason) is to make your own mini-dameon which enters into a fake POP session. Just allow any authentication information and server up your fake notice. The POP3 protocol is fairly simple and you only have to implement a small subset of commands: user(noop), pass(noop), list, stat, retr, top, rset(noop), noop(noop), dele(noop), quit. I return a "OK" for most of these commands and most of them are noops. I wrote a patch for qpopper to do this but you could probably modify the source to make it a stand-alone server: http://www.math.ubc.ca/~tam/Software/Qpopper.M2W/m2w.patch For the curious, the reason why I had to make this bizarre patch: http://www.math.ubc.ca/~tam/Software/Qpopper.M2W/ Joseph Tam <tam(a)math.ubc.ca>

1 0

[Dovecot] Dovecot+outlook express timeout error
by Artur Słowik 09 Dec '06

09 Dec '06

Hi When my outlook express client first time connect to Dovecot pop3 server, I receive error timeout 60s. When I close client and run client again then client receive mail correctly. I have in config file: //pop3_client_workarounds = outlook-no-nuls, oe-ns-eoh// best regards Arti

1 0

Re: [Dovecot] Blocked
by Kenny Dail 08 Dec '06

08 Dec '06

> I block pop3 to force my users to use webmail (that is in fact using IMAP). > What mechanism should trigger sending a message that pop3 is blocked? > Once this message is send, it is either send by postfix to alternative > email account (Postfix forward) or just read once thru Webmail. In the > mean time this user is trying to establish pop3 on a 24/7 basis $-) What's wrong with just ignoring the login attempts? Why not stop listening for POP3 altogether? Or, you can block the particular user at the firewall. Or if you have a special someone who is allowed POP3 you can give them an alternate port to login with, and not listen at all on port 110 if it really bothers you. -- Kenny Dail <kend(a)amigo.net>

1 0

Re: [Dovecot] Blocked
by Jos Chrispijn 08 Dec '06

08 Dec '06

Dominic Marks: > An alternative which does this is to replace their mailbox with > a read-only mbox or maildir containing a single mail with the > 'you have been blocked' message you want. Obviously you would > need to allow them to log in again, but they would only receive > the message you choose. I block pop3 to force my users to use webmail (that is in fact using IMAP). What mechanism should trigger sending a message that pop3 is blocked? Once this message is send, it is either send by postfix to alternative email account (Postfix forward) or just read once thru Webmail. In the mean time this user is trying to establish pop3 on a 24/7 basis $-) Jos

2 1

[Dovecot] Blocked
by Jos Chrispijn 08 Dec '06

08 Dec '06

I have blocked some pop3 user sessions: Dec 8 00:03:38 xxxxxx pop3-login: Disconnected: user=<johndoe> Is there a way of sending a message to a user that constantly tries to establish a block pop3 session? Example: From: noreply(a)mysite.com Subject: Your POP3 session Message: Hello, Your POP3 session is blocked; please contact systemmanagement --

3 2

Re: [Dovecot] Blocked
by Jos Chrispijn 08 Dec '06

08 Dec '06

Alan Premselaar schreef (08-12-06 3:06): > if you're blocking their POP3 access, how are those users ever supposed > to receive that mail notification? > That's simple: i am blocking them on username. Example: I am blocking johndoe's pop3 session. In Postfix I forward all mail for johndoe to johndoe(a)another.email.adress.com So johndoe can still receive mail. > Also, what if it's a brute force bot or something trying to access a > random blocked account via POP3? (alright, not as likely, but still > possible) > There you've got a point... > a more suitable solution would be if there was a way to return an error > during the authentication process that was returned as a result of > trying to authenticate to a blocked user. > The text I am sending could be any text, from 'your pop3 box = blocked' to '<any errornumber> on your POP3 box' Jos

1 0

[Dovecot] specifying INBOX with maildir for mail_location
by Post Master 08 Dec '06

08 Dec '06

I'd like to store all of my mail in maildir, but I want to store the inbox and indices on fast storage and everything else on deep storage. Does the following configuration value for mail_location accomplish this? mail_location = maildir:/data/deep/%Ld/mail/%Ln:INBOX=/data/fast/%Ld/mail/%Ln:INDEX=/data/fast/%Ld/indices/%Ln ------------------------------------------------------------------------ If not, does the following configuration accomplish this with namespaces? mail_location = maildir:/data/fast/%Ld/mail/%Ln:INDEX=/data/fast/%Ld/indices/%Ln namespace private { separator = / inbox = yes hidden = yes prefix = location = } namespace private { separator = / hidden = yes prefix = ??? location = maildir:/data/deep/%Ld/mail/%Ln/??? } ------------------------------------------------------------------------ Actually, I can't quite finish the namespace configuration. I'd like to set something like: prefix = * location = maildir:/data/deep/%Ld/mail/%Ln But I suspect the '*' won't actually match everything, and even if it did, I suppose it would also match the inbox. I began with listing any and every typical folder in its own namespace like: namespace private { separator = / hidden = yes prefix = drafts location = maildir:/data/deep/%Ld/mail/%Ln/drafts } namespace private { separator = / hidden = yes prefix = templates location = maildir:/data/deep/%Ld/mail/%Ln/templates } namespace private { separator = / hidden = yes prefix = sent location = maildir:/data/deep/%Ld/mail/%Ln/sent } and so on, but that doesn't seem very elegant. Also, namespaces scare me for client compatibility. Am I missing something obvious?

2 2

[Dovecot] Extra inbox problem
by Stephen Allen 07 Dec '06

07 Dec '06

One of my users (who uses Outlook) has lost all her folders that were inside her INBOX. She collects her mail by IMAP. I have confirmed that she has no folders in her INBOX. However, if I use Pine, I can see a couple of extra folders, "INBOX." and "Junk Email." that I don't think should be there. There already folders by that name but without the dot on the end. If I look in "INBOX." I can see the folders she's missing and the folder that they contain etc. I backed up and moved the files listed under .maildir, and Dovecot recreated them, but it made no difference to the problem. I don't understand why those extra folders appear in Pine, but not Outlook. Kind regards, Steve

3 2

[Dovecot] rc15 dumped core
by Hans Morten Kind 07 Dec '06

07 Dec '06

We have been running rc15 since Sunday experiencing no trouble, but today one user crashed. rc15 on Solaris-5.9, the server had app 6GB free memory at the time of the crash, app 70% idle running with an avg.load at 4 of 8 processors available. The USER's INBOX was quite smooth, app 13MB containing 320 messages. The core dump was accompanied with these log-entries: Nov 23 2006 12:27:00 [local3.error] IMAP(USER): Corrupted index cache file imapindex/USER/.imap/INBOX/dovecot.index.cache: invalid field header size 12:28:23 [local3.error] IMAP(USER): mremap_anon(1164206080) failed: Not enough space 12:28:23 [local3.error] IMAP(USER): mremap_anon(8192) failed: Invalid argument 12:28:24 [local3.error] child 17510 (imap) killed with signal 10 12:28:25 [local3.info] imap-login: Login: user=<USER>, method=PLAIN, rip=000.177.00.21, pid=19178 We have been observing a few of the 'invalid field header size' messages while running rc15. But as this USER, others seem to recover after the message has been logged. The messages from 'mremap_anon' have never been seen before. Actually '1164206080' looks very much like a timestamp, differing 75223 seconds from the time of the crash ... spooky I will start running the supplied code for memory debugging on this user and I enclose a back trace from the crash. The interessting stuff from the back trace is probably that hdr (and so cache->hdr) is 0xffffffff so that hdr->continued_record_count gives no sense (Cannot access memory at address 0xb) but cache->index->map->records_count is 320 Still on this and another server running rc15 (Sol5.8), we have thousands of happy users beeing served very fast by Dovecot. hmk

2 5

[Dovecot] rc15 sort bug
by Cor Bosman 07 Dec '06

07 Dec '06

Hi, ive come across what looks like a bug in how dovecot sorts the mail when sorting on subject. We noticed this on our current beta8 version, and I can also reproduce it in rc15. One of our customers has hundreds of emails with subjects like this: Subject: 20060823 Kanglaonline-NSCN(IM) cadres violating Tml truce: NSCN(K) Subject: 20060824 LSE - Shell jv denies 3.2 bln usd fraud claims by Nigerian parliament Subject: =?iso-8859-1?Q?20060824_Ibinda_-_Onze_militares_angolanos_mortos_em_comba?= Subject: =?iso-8859-1?Q?20060824_Gingaocultural=2C_VoA_-_Deputados_constatam_clima?= Some of the Subject lines are encoded, some arent. All the encoded Subject lines end up being sorted wrong. Here is a UID SORT output: * SORT 3 4 5 10 20 26 27 28 29 30 33 35 36 37 39 43 44 46 47 58 59 60 83 85 87 8 8 89 90 93 112 113 115 116 118 124 126 127 130 131 132 134 135 137 139 140 141 1 79 205 206 208 209 210 211 212 215 217 226 237 238 240 241 250 282 283 285 291 2 92 293 314 315 316 317 318 319 320 321 328 329 330 337 355 377 378 379 380 381 3 82 383 384 385 407 411 413 423 427 398 409 367 374 376 371 348 372 353 369 400 3 66 352 396 50 370 354 402 347 404 412 415 356 419 408 414 420 388 243 251 21 386 31 1 2 7 6 9 8 349 13 11 12 32 15 34 14 16 22 23 18 17 25 24 19 45 38 48 397 40 3 49 41 40 42 421 56 82 54 53 51 55 52 57 86 63 64 61 62 65 67 71 66 77 76 72 74 75 68 70 84 69 73 80 81 78 79 91 92 128 133 94 97 98 95 96 242 100 102 99 101 1 03 249 114 105 104 247 108 106 107 109 111 375 110 117 387 322 129 125 136 122 1 21 123 144 143 120 233 119 138 142 166 214 149 156 153 155 152 158 159 165 162 1 51 157 154 148 150 160 145 146 147 161 410 418 417 163 164 172 168 173 171 170 1 69 167 178 174 175 176 177 180 184 181 182 186 183 185 213 389 230 232 207 231 2 29 246 216 234 248 225 390 189 275 277 187 340 204 200 197 195 194 192 193 191 1 99 198 196 416 188 190 391 350 201 218 202 245 203 361 228 279 239 220 224 221 2 23 222 235 244 219 280 236 281 278 252 254 304 351 256 257 253 255 274 276 273 2 64 265 263 261 262 258 272 260 259 294 357 227 290 269 286 358 266 270 271 268 2 87 267 288 284 289 359 310 309 307 303 305 306 373 295 300 297 298 296 299 311 3 12 302 308 301 313 332 325 326 324 323 333 346 327 331 362 334 339 335 336 360 3 41 344 338 345 342 343 401 365 392 363 368 399 394 405 395 406 422 424 425 426 4 29 428 393 For instance, UID 112 is an encoded subject and should appear after UID 111 later on in the output. Bug or feature? Regards, Cor Bosman XS4ALL

1 0

[Dovecot] Quota Display with Horde and LDAP
by Raja T Nair 07 Dec '06

07 Dec '06

Hi All, I am using dovecot-1.0.rc15 wth LDAP authentication configured. My webmail is Horde/IMP. While logging in, Horde gives `Unable to retrieve quota' message, instead of the usage report. capability string is: OK [CAPABILITY IMAP4rev1 SASL-IR SORT THREAD=REFERENCES MULTIAPPEND UNSELECT LITERAL+ IDLE CHILDREN NAMESPACE LOGIN-REFERRALS AUTH=PLAIN] Dovecot ready. There is no QUOTA shown as part of capability, whereas courier-imap used to show it. I have uncommented the quota = maildir line in dovecot.conf. Do I need to do something extra to enable quota query from LDAP and proper reporting? regards, raja. -- +91 944 715 5548(Cell)

3 2

[Dovecot] Pre-rev1 compatibility
by Hans Werner Strube 07 Dec '06

07 Dec '06

What about adding some compatibility for pre-rev1 IMAP4 clients which are still around (e.g., CDE dtmail, even in Solaris 10)? Especially, the understanding of command FETCH message (... RFC822.HEADER.LINES (parameters)) instead of FETCH message (... BODY.PEEK[HEADER.FIELDS (parameters)]) (with correspondingly changed replies) would be desirable and shouldn't be too difficult to implement.

4 4

[Dovecot] rc15 'configure' fails at "unexpected token `SSL,'"
by snowcrash+dovecot 06 Dec '06

06 Dec '06

i'm building dovecot-1.0.rc15 on osx. when i, ./configure --with-ssl=openssl --with-ssldir=/etc/ssl_certs --disable-static --enable-shared --disable-maintainer-mode --disable-ipv6 --with-mysql --with-sql-drivers=mysql --with-deliver --with-pop3d --with-storages=maildir,mbox --disable-debug it fails at, ... checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool ./configure: line 20184: AM_ICONV: command not found checking for strings.h... (cached) yes checking for stdint.h... (cached) yes ... checking whether va_lists can be copied by value... yes ./configure: line 26434: syntax error near unexpected token `SSL,' ./configure: line 26434: ` PKG_CHECK_MODULES(SSL, openssl)' i've checked the cvs co of the 1.0-branch, and the same problem exists. any help? thanks.

3 4

[Dovecot] quota question
by Kenny Dail 06 Dec '06

06 Dec '06

I'm afraid I'm being a little confused by the whole quota setup with dovecot. I see references to quotas about, but I'm not certain how many of them apply to 1.0rc15. I currently have the conf setup as indicated on http://wiki.dovecot.org/Quota So, in my setup, I'm using Postfix, Maildrop and Dovecot. Mailstore is on NFS. Dovecot is handling the pop3 and imap connects. There seems to be some trouble in the quotas because Courier counts quota one way and Dovecot in a different way. Quotas are stored on a per user basis in the MySQL DB. The trouble I'm getting is that very frequently the quota being reported is quite different from reality. This leads to erroneous over quota delivery errors. So what is necessary to make sure the quotas work as they are supposed to in my environment? Once again thank you very much for your help. -- Kenny Dail <kend(a)amigo.net>

1 0

[Dovecot] Quota's KB or MB
by Richard Mayhew - Nashua Mobile Broadband Division 05 Dec '06

05 Dec '06

Hi, Did dovecot ever implement quota's in MB's or has it always used quota's in KB's? I have RC15 using quota's in KB and beta8 somehow using quota's in MB's. Am I going mad? Regards Richard

1 0

[Dovecot] Thunderbird and Quota
by Richard Mayhew - Nashua Mobile Broadband Division 05 Dec '06

05 Dec '06

Ok, I found my problem, I run a backend IMAP/POP3 Server (DoveCot) with a front end IMAP/POP3 Proxy Server (DoveCot). I found that the proxy server was not advertising the fact that it supported QUOTA's. Once I enabled mail_plugins with quota support for the 2 protocols it all worked. Is this correct for a proxy server config. I have included my config below for comments? ################################## base_dir = /var/run/dovecot/ protocols = imap pop3 disable_plaintext_auth = no shutdown_clients = yes syslog_facility = mail ssl_disable = yes login_process_per_connection = no login_processes_count = 5 login_max_processes_count = 128 login_max_connections = 256 login_greeting = POP3/IMAP Server Ready. protocol imap { mail_plugins = quota imap_quota } protocol pop3 { mail_plugins = quota } auth_cache_size = 16384 auth_cache_ttl = 1800 auth_verbose = no auth_debug = no auth_debug_passwords = no verbose_proctitle = yes auth default { mechanisms = plain passdb sql { args = /etc/dovecot/sql.conf } userdb static { args = static uid=1000 gid=1000 home=/dev/null } user = root count = 1 } plugin { quota = maildir }

1 0

[Dovecot] checking during authentification if imap or pop3 connection
by wiki kaha 05 Dec '06

05 Dec '06

Hello. I'd like to know if there is a way to differ between imap and pop3 during mysql-auth. I would need the possibility to allow some users imap and only allow pop3 to the rest. I think there could be a flag that'll be substituted in my auth query. Thanks for infos. Regards. ____________________________________________________________________________________ Cheap talk? Check out Yahoo! Messenger's low PC-to-Phone call rates. http://voice.yahoo.com

2 2

[Dovecot] maildir quotas, dovecot-lda
by Dean Manners 05 Dec '06

05 Dec '06

Hey guys, Running rc15, I have maildir quotas working with deliver - however I seem to be unable to get the maildir quota ignore option to work. Am trying to ignore a user wide directory "Maildir/Filtered/", where detected virii/spam gets sorted to. Does deliver take notice of the maildir ignore option ? Applicable line from dovecot-sql.conf: user_query = SELECT CONCAT('/var/mailstore/',Domain,'/',Partition,'/',Email,'/') AS home, CONCAT('maildir:/var/mailstore/',Domain,'/',Partition,'/',Email,'/') AS mail, 5000 AS uid, 5000 AS gid, CONCAT('maildir:storage=10240:ignore=Filtered') AS quota FROM Mailbox WHERE Email = '%u' AND Status = '1' As a side note is there a configurable variable/template to set the "Your message was automatically rejected by Dovecot Mail Delivery Agent" messages. Or is customization only possible by modifying the source ? Regards __________________________________________ Dean Manners

1 0

[Dovecot] Invalid password encoding
by Kenny Dail 04 Dec '06

04 Dec '06

ok so now I've got Dovecot 1.0rc15 started on the test server. however it seems that the auth-workers don't like their job: auth-worker(default): plain_md5_verify((null)): Invalid password encoding What do I need to do to make their life easier? Current dovecot.conf: protocols = imap imaps pop3 pop3s disable_plaintext_auth = no login_greeting = amigo.net ready. mail_location = maildir:%h/Maildir namespace private { separator = . prefix = INBOX. inbox = yes hidden = no } mail_extra_groups = mail mmap_disable = yes lock_method = dotlock first_valid_uid = 465 valid_chroot_dirs = /var/mail/virtual maildir_copy_with_hardlinks = yes protocol imap { mail_plugins = quota imap_quota trash login_greeting_capability = yes imap_client_workarounds = outlook-idle } protocol pop3 { pop3_uidl_format = %08Xu%08Xv mail_plugins = quota pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } protocol lda { postmaster_address = postmaster(a)amigo.net } auth_default_realm = amigo.net auth_username_translation = %@ auth_username_format = %Ln@%d auth_worker_max_count = 60 auth default { mechanisms = plain login apop digest-md5 cram-md5 passdb sql { args = /etc/dovecot/dovecot-sql.conf } userdb prefetch { } user = vmail count = 1 socket listen { master { path = /var/run/dovecot/auth-master mode = 0660 user = postfix group = mail } client { path = /var/run/dovecot/auth-client mode = 0660 } } } plugin { quota = maildir trash = /etc/dovecot/dovecot-trash.conf } -- Kenny Dail <kend(a)amigo.net>

2 1

[Dovecot] maildirsize update error
by Maykel Moya 04 Dec '06

04 Dec '06

According to [1], Trash is a reserverd folder name. When moving a message to it, maildirsize should be update with a negative byte count. If I move a message from any folder to Trash, maildirsize gets two lines, one positive and one negative. The problem is that a user can't move messages to Trash while being overquota because the positive entry goes before the negative. I'm using dovecot-1.0rc14. Regards maykel [1] http://www.inter7.com/courierimap/README.maildirquota.html

6 15

[Dovecot] convert_mail ?
by Andrew Z 04 Dec '06

04 Dec '06

I can't find much documentation on the convert_mail plugin. For example, on the wiki plugins page, clicking on convert goes to <http://wiki.dovecot.org/InterWiki> which is not relevant. Can I use convert_mail to migrate from UW IMAP 2002 mbox format where some mail is in ~/ and the inboxes are in /var/spool/mail? Will it know which files are mbox folders, so it doesn't try to convert other files in the home directories? When are the e-mails converted? Are the old files deleted? Is this configuration snippet valid? default_mail_env = maildir:~/Maildir convert_mail = mbox:~/:INBOX=/var/mail/%u If I can do that, it seems like an easy change. Andrew

3 4

[Dovecot] Performance Tuning Recommendations for Dovecot
by Jack Stewart 04 Dec '06

04 Dec '06

Hi, I'm wondering if anyone has some performance tuning recommendations for Dovecot. We are currently building a series of department e-mail/imap servers and we will be replacing our central core in the coming summer. The department servers are relatively small 100-200 users and the central server is modest - around 7000 accounts. They will be using local filesystem or SAN for the backend storage. So far, enabling hard links seems to be a big win. I'm curious if there are others out there that people have found useful. I am considering putting the indexes on memory disks but I haven't scoped out the requirements for the central system yet (i.e. it is unclear to me how large the index will be for approximately 13 million messages take take up roughly 800GB of disk space. Any pointers are greatly appreciated. Sincerely, ---Jack Stewart

2 1

[Dovecot] assertion failed
by Richard Mayhew - Nashua Mobile Broadband Division 04 Dec '06

04 Dec '06

Hi, Would anyone know what these errors mean? Running DoveCot RC15 on RedHat ES 4 Dec 1 17:30:53 serv-01 dovecot: pop3-login: file client.c: line 423 (client_unref): assertion failed: (client->destroyed) Dec 1 17:31:21 serv-01 dovecot: pop3-login: file client.c: line 423 (client_unref): assertion failed: (client->destroyed) Dec 1 17:31:25 serv-01 dovecot: pop3-login: file client.c: line 423 (client_unref): assertion failed: (client->destroyed) Dec 1 17:31:29 serv-01 dovecot: pop3-login: file client.c: line 423 (client_unref): assertion failed: (client->destroyed) Dec 1 17:31:33 serv-01 dovecot: pop3-login: file client.c: line 423 (client_unref): assertion failed: (client->destroyed) Dec 1 17:31:41 serv-01 dovecot: pop3-login: file client.c: line 423 (client_unref): assertion failed: (client->destroyed) Dec 1 17:31:45 serv-01 dovecot: pop3-login: file client.c: line 423 (client_unref): assertion failed: (client->destroyed) Dec 1 17:31:49 serv-01 dovecot: pop3-login: file client.c: line 423 (client_unref): assertion failed: (client->destroyed) Dec 1 17:31:53 serv-01 dovecot: pop3-login: file client.c: line 423 (client_unref): assertion failed: (client->destroyed) Regards Richard

2 4

[Dovecot] Deliver bounces messages if can't write to logs
by Francisco Reyes 04 Dec '06

04 Dec '06

I am new to using Dovecot's LDA deliver. One particular item which I think may be improved.. If one uses logs instead of syslog and if Dovecot/Deliver can't write to the logs, mail is bounced. In contrast if it can't connect to the authentication socket auth-master, it defers. Shouldn't mail be deferred if access to the log files fails due to rights? Doesn defer makes more sense than to bounce in this case? In all likelihood it was postfix that bounced/deferred, but I believe it has to do with what response postfix got from deliver.

3 5

[Dovecot] Enabling different quota limits for different users for /etc/passwd as userdatabase on FC3
by ankush grover 04 Dec '06

04 Dec '06

hey friends, I am running my company's mail server on FC3 which comprises of Postfix + Dovecot + MailScanner + Clamav + Squirrelmail + MailWatch + Spamassassin. I am using Dovecot 0.99.13-3 version on FC3 and I want to implement Quota limits for the users. I am using userdatabase as /etc/passwd file (auth_userdb = passwd ) and password database as pam(auth_passdb = pam) for dovecot. I read the documentation of dovecot but the quota example for /etc/passwd is missing. I want to have different quota limits for different users for example Quota limitation will depend upon the users, well there will be a global quota limit which will takes place if there is no limit specified for that particular user. Can anybody guide me how to configure quota's for different users in dovecot for /etc/passwd as userdatabase and pam as password database. Please let me know if you need any further inputs. Thanks & Regards Ankush Grover

2 1

[Dovecot] Protecting folders
by Hr. Daniel Mikkelsen 04 Dec '06

04 Dec '06

Hi. Is it possible to prevent certain folders from being deleted via IMAP using Dovecot? I don't want to write protect the folders, just prevent people from deleting their Junk, Trash, Drafts, etc. -- Daniel Mikkelsen Copyleft Software AS

2 1

[Dovecot] / and . in folder names
by Magnus Holmgren 04 Dec '06

04 Dec '06

Right now, trying to create folders with "/" or "." in their name can yield strange results, because Dovecot simply turns every occurrence of the current folder hierarchy separator in a folder name given by the client into a "." (or so it seems). If the folder separator isn't ".", clients can try to create folders with names containing ".", and Dovecot will convert those "." back to the folder separator on listing. It will look like there is an intermediate folder, but Dovecot is unaware of it. If the folder separator isn't "/", clients can try to create folders with names containing "/", which will simply fail. Judging from to http://www.courier-mta.org/?maildir.html, Courier encodes "." and "/" in the names of the directories the folders are stored as on disk. This means that that of "." and "/" that isn't the folder separator can be used in folder names, but it also means that Dovecot has to be able to perform the recoding. Has any thought been given to this? -- Magnus Holmgren holmgren(a)lysator.liu.se (No Cc of list mail needed, thanks) "Exim is better at being younger, whereas sendmail is better for Scrabble (50 point bonus for clearing your rack)" -- Dave Evans

1 0

Re: [Dovecot] Auth process died too early
by Ken Dail 04 Dec '06

04 Dec '06

> On Fri, 2006-12-01 at 16:40 -0700, Kenny Dail wrote: >> Hello all, >> Trying an Install of Dovecot 1.0rc15. We have previously used 1.0b8 >> without too many troubles. >> starting Dovecot 1.0rc15 yields: >> >> Dec 1 16:31:08 mailtest1 dovecot: Dovecot v1.0.rc15 starting up >> Dec 1 16:31:09 mailtest1 dovecot: pop3-login: Aborted login: >> rip=172.30.0.3, lip=172.30.0.30 >> Dec 1 16:31:09 mailtest1 dovecot: Auth process died too early - >> shutting down >> Dec 1 16:31:09 mailtest1 dovecot: auth(default): Socket already >> exists: /var/run/dovecot/auth-client > .. >> count = 10 > > Auth sockets are unfortunately incompatible with count > 1. Too large > change to fix before v1.0. I don't think it worked in beta8 either? That does appear to be the problem. However, as far as I can tell it is working on our beta8 machines with count = 10. Thanks! Kenny

1 0

[Dovecot] Evolution: DATA command failed: Requested mail action aborted: exceeded storage allocation.
by Rob Frohne 03 Dec '06

03 Dec '06

Hi Everyone, I have been recently getting these errors in Evolution 2.6.1. I think it is a client issue, as I don't see them using Thunderbird on the same machine (though I get a lot of "disconnected from servers" from Thunderbird. On Evolution 2.8.1 on another machine I haven't noticed these issues. DATA command failed: Requested mail action aborted: exceeded storage allocation. It seems that it happens when my sent messages are attempted to be stored on my IMAP sent folder on the server (running dovecot 1rc15, and OS X. I can't find any hints in the mail.log on the server or the system.log on the server, or the system.log on the client. Any idea on how to troubleshoot this? Thanks, Rob -- Rob Frohne, Ph.D., P.E. E.F. Cross School of Engineering Walla Walla College 100 SW 4th Street College Place, WA 99324 (509) 529-3585 http://www.wwc.edu/~frohro/

3 2

Re: [Dovecot] Unsolved : mbox-sync-rewrite.c : assertion failed
by Timo Sirainen 03 Dec '06

03 Dec '06

Looks like I broke keyword handling for mboxes in rc10, fix here: http://dovecot.org/list/dovecot-cvs/2006-October/006632.html

6 10

[Dovecot] problem in rc15 (proxy mode)
by Laurent Papier 03 Dec '06

03 Dec '06

Hi, I have test dovecot on one of my pop3/imap proxies (from rc10 to rc15). I immediately get a lot of error messages like this one : Nov 27 15:10:45 mproxy1 dovecot: pop3-login: file client.c: line 423 (client_unref): assertion failed: (client->destroyed) Nov 27 15:10:45 mproxy1 dovecot: child 21677 (login) killed with signal 6 A lot means one every 2 or 3 seconds. Any suggestion ? ---------------- protocols = pop3 imap disable_plaintext_auth = no ssl_disable = yes login_process_size = 64 login_process_per_connection = no login_processes_count = 8 login_max_connections = 256 login_greeting = loktar auth_cache_size = 16384 auth_cache_ttl = 1800 auth_worker_max_count = 30 auth default { mechanisms = plain # Userdb settings are not used with proxy but there need to be something. userdb static { args = static uid=5000 gid=5000 home=/dev/null } passdb sql { args = /etc/dovecot-mysql.conf } user = root count = 1 } -- Laurent Papier - 03 88 75 80 50 Admin. système - SdV Plurimedia - <http://www.sdv.fr/>

3 3

[Dovecot] Deliver Root Setuid
by Láďa 03 Dec '06

03 Dec '06

Hi, I just configured my Postfix installation to deliver via Dovecot LDA. But because I use separate uids for virtual domains I had to set deliver to be setuid root. Altough I find this as frequent answer to this problem with deliver LDA I am not a 100% sure - basically because I try to avoid root setuids as much as I can. What should be better solution - to have all mailboxes with one owner or this setuid binary? My main reason for separate uids was filesystem quotas for whole domain. But my mail partition resides on XFS so I can do the same with directory quotas and I also noticed changes in quotas which should be also per domain in some next release or with patch. Thanks for any advice and also thanks for all great work on Dovecot. Láďa

4 7

[Dovecot] Too many open files
by bofh list 03 Dec '06

03 Dec '06

dovecot: Nov 08 04:04:23 Error: IMAP(user): open() failed with file mailstore/user/Maildir/.Alerts/dovecot.index.log.2: Too many open files dovecot: Nov 08 04:04:23 Error: IMAP(user): open(mailstore/user/Maildir/.Alerts/tmp/1162976663.P4853Q1817.server) failed: Too many open files dovecot: Nov 08 04:04:23 Error: IMAP(user): open() failed with file mailstore/user/Maildir/dovecot.index.tmp: Too many open files Seeing this with both 1.0beta9 and 1.0rc12 This occured when a user was not using the client, however the client(Thunderbird) filtering mechanism was active as their client is left on 24x7. Do we really need to increase individual user maxfiles to >1024 ? Dovecot is set to 31768 so it is definately the user process here. Anything I can tweak in dovecot.conf to prevent this? Thanks!

5 7

[Dovecot] Dovecot hung or what?
by Odhiambo WASHINGTON 03 Dec '06

03 Dec '06

Here is my first major problem with dovecot. I am running rc15 on FreeBSD 6.1. I run dovecot supervised by DJB's daemontools. I run only the pop3 service. A colleague informed me that pop3 service was simply not responding. They could not rcv mail. When I checked the server, tail-ing dovecot.log, here is what was scrolling: [wash@nbi ~]$ tail -f /var/log/dovecot.log dovecot: Nov 23 18:04:11 Info: pop3-login: Disconnected: Inactivity: rip=196.200.37.94, lip=62.8.64.64 dovecot: Nov 23 18:04:11 Info: pop3-login: Disconnected: Inactivity: rip=196.200.42.212, lip=196.200.36.2 dovecot: Nov 23 18:04:12 Info: pop3-login: Disconnected: Inactivity: rip=196.200.35.130, lip=62.8.64.64 dovecot: Nov 23 18:04:13 Info: pop3-login: Disconnected: Inactivity: rip=168.144.108.27, lip=62.8.64.64 dovecot: Nov 23 18:04:14 Info: pop3-login: Disconnected: Inactivity: rip=168.144.108.8, lip=62.8.64.64 dovecot: Nov 23 18:04:17 Info: pop3-login: Disconnected: Inactivity: rip=196.200.39.169, lip=62.8.64.64 dovecot: Nov 23 18:04:17 Info: pop3-login: Disconnected: Inactivity: rip=41.220.126.2, lip=196.200.38.2 dovecot: Nov 23 18:04:17 Info: pop3-login: Disconnected: Inactivity: rip=196.200.39.169, lip=62.8.64.64 dovecot: Nov 23 18:04:18 Info: pop3-login: Disconnected: Inactivity: rip=196.200.37.174, lip=62.8.64.64 dovecot: Nov 23 18:04:19 Info: pop3-login: Disconnected: Inactivity: rip=196.216.68.230, lip=62.8.64.64 dovecot: Nov 23 18:04:22 Info: pop3-login: Disconnected: Inactivity: rip=196.200.45.54, lip=62.8.64.64 dovecot: Nov 23 18:04:26 Info: pop3-login: Disconnected: Inactivity: rip=196.200.35.130, lip=62.8.64.64 dovecot: Nov 23 18:04:27 Info: pop3-login: Disconnected: Inactivity: rip=196.200.45.54, lip=62.8.64.64 dovecot: Nov 23 18:04:28 Info: pop3-login: Disconnected: Inactivity: rip=41.220.126.2, lip=62.8.64.64 dovecot: Nov 23 18:04:28 Info: pop3-login: Disconnected: Inactivity: rip=196.207.23.28, lip=62.8.64.64 dovecot: Nov 23 18:04:31 Info: pop3-login: Disconnected: Inactivity: rip=82.109.38.129, lip=62.8.64.64 dovecot: Nov 23 18:04:32 Info: pop3-login: Disconnected: Inactivity: rip=41.222.12.121, lip=196.200.36.2 ^C [wash@nbi ~]$ su Password: nbi# sh /usr/local/etc/rc.d/svscan.sh stop Stopping svscan. nbi# sh /usr/local/etc/rc.d/svscan.sh start Starting svscan. I then restarted the service .... nbi# nbi# tail -f /var/log/dovecot.log dovecot: Nov 23 18:04:47 Info: pop3-login: Disconnected: Shutting down: rip=196.200.37.126, lip=62.8.64.64 dovecot: Nov 23 18:04:47 Info: pop3-login: Disconnected: Shutting down: rip=196.200.39.74, lip=62.8.64.64 dovecot: Nov 23 18:04:47 Info: pop3-login: Disconnected: Shutting down: rip=196.200.35.146, lip=62.8.64.64 dovecot: Nov 23 18:04:47 Info: pop3-login: Disconnected: Shutting down: rip=196.200.37.42, lip=62.8.64.64 dovecot: Nov 23 18:04:47 Info: pop3-login: Disconnected: Shutting down: rip=196.200.46.122, lip=62.8.64.64 dovecot: Nov 23 18:04:50 Info: Dovecot v1.0.rc15 starting up After this, dovecot was now answering as expected. 1. What could the problem be? 2. How can I reproduce it. PS: This has never happened ever since with the previous versions. -Wash http://www.netmeister.org/news/learn2quote.html DISCLAIMER: See http://www.wananchi.com/bms/terms.php -- +======================================================================+ |\ _,,,---,,_ | Odhiambo Washington <wash(a)wananchi.com> Zzz /,`.-'`' -. ;-;;,_ | Wananchi Online Ltd. www.wananchi.com |,4- ) )-,_. ,\ ( `'-'| Tel: +254 20 313985-9 +254 20 313922 '---''(_/--' `-'\_) | GSM: +254 722 743223 +254 733 744121 +======================================================================+ It's lucky you're going so slowly, because you're going in the wrong direction.

4 4

[Dovecot] UIDs broken with partial sync in mbox
by illicoweb, eric 03 Dec '06

03 Dec '06

Hi all, I have some trouble: multiple copies of mail and error messages: IMAP(contact): UIDs broken with partial sync in mbox file /var/mail/contact Fedora core 5 x86 - dovecot-1.0-0.beta8.2.fc5 Can you help me ? -- thanks, Eric ____________________________________________ Cet email a ete verifie par ILLICOWEB Anti-virus Clamav / Anti-Spam Spamassassin

4 3

[Dovecot] Pop3 migration (was Status of commercial support?)
by Francisco Reyes 03 Dec '06

03 Dec '06

Odhiambo WASHINGTON writes: > | Courier 4 POP migration to dovecot. > > This should be very easy, I think. > Once you know the uidl format used by Courier 4 POP. The migration is Courier 4 to Dovecot using Maildir format. I used some scripts I found on the net and adapted them. I got everything to come over (ie imap subscriptions), except POP3 UIDs. My Courier POP3-uid files look like: /2 19 1164413643 <message file name>,S=28985:2,S 29648 10:1164413643 <message file name>,S=5913:2,S 6042 11:1164413643 <message file name>,S=5121:2, 5236 12:1164413643 <message file name>,S=5257:2, 5373 13:1164413643 <message file name>,S=5106:2, 5215 14:1164413643 <message file name>,S=5618:2, 5745 15:1164413643 <message file name>,S=30619:2, 31353 16:1164413643 <message file name>,S=34785:2, 35609 17:1164413643 <message file name>,S=6695:2, 6852 18:1164413643 My pop3_uidl_format is pop3_uidl_format = %08Xu%08Xv Looking at what Dovecot generates on a brand new pop account the files look like: 1 1164413643 29 10 <message file name> 11 <message file name> 12 <message file name> 13 <message file name> ... and more with the same format... So I write an AWK script which creates the proper first line and gets for each line the message ID and message file name. Yet after I do the conversion and run a pop3 client against the migrated pop account, old mails are re-downloaded.

2 2

[Dovecot] cache_key assertion error 1.0.beta8
by Frank Cusack 03 Dec '06

03 Dec '06

I just added auth caching with pam, and I'm getting this error: dovecot: [ID 107833 mail.error] auth(default): file passdb.c: line 178 (passdb_init): assertion failed: (passdb->passdb->default_pass_scheme != NULL || passdb->passdb->cache_key == NULL) A google search turns up <http://www.dovecot.org/list/dovecot-cvs/2005-March/004117.html> which looks approx like this except the assertion above is in passdb.c. Anyway, is this a known problem in 1.0.beta8? I've been reluctant to upgrade to the rc's due to all the problems. -frank

2 5

[Dovecot] Indexing transfered mails?
by Francisco Reyes 03 Dec '06

03 Dec '06

Going to be transfering a number of domains from a Courier setup to Dovecot. Is there a way to get Dovecot to index the files before the users access their accounts?

2 2

[Dovecot] Status of commercial support?
by Francisco Reyes 03 Dec '06

03 Dec '06

Was going over the archives looking for any info on commercial support. Only found some emails back from 2005. Is there commercial support available? If not, any consultants that could help with an installation. In particular Courier 4 POP migration to dovecot.

6 8

[Dovecot] assertion failed: (fd >= 0)
by Jos Chrispijn 03 Dec '06

03 Dec '06

After I activated disabling POP3 for one of my users (not user 'jos'), the following is in my logfile: Dec 3 16:03:33 webrz dovecot: IMAP(jos): Disconnected Dec 3 16:03:36 webrz dovecot: IMAP(jos): Disconnected in IDLE Dec 3 16:03:36 webrz dovecot: IMAP(jos): file ioloop.c: line 22 (io_add): assertion failed: (fd >= 0) Dec 3 16:03:36 webrz dovecot: child 74197 (imap) killed with signal 6 Can someone tell me what is going wrong? Have a deny.imap file with no users in it and a deny.pop3 file with one user in it... Jos

2 2

[Dovecot] [IDEA] Shared Folders via LDAP Lookups
by Gavin Henry 03 Dec '06

03 Dec '06

Hi All, We've been thinking a lot about the 2 different ways dovecot implements shares; namespaces and symlinks. We currently use the symlink version for our clients and they use the create_dovecot_shares.pl tool we did at: http://dovecot.org/tools/ Our idea is either in the namespace declaration or if a folder has a dovecot-shared file/symlink, have a ldap lookup defined in say, dovecot-ldap-shares.conf or dovecot-ldap.conf, that queries a dn and looks for memberUID or a group dn, then those uids/groups can get into the IMAP maildir. Obviously the original folder would need to be owned by some predefined user, e.g dovecot etc. Then it's just a simple matter of adding a new memberUID/group to the share listing. We can do a custom dovecot.schema if needed (for say a dovecotShare attribute etc.), as long as we get dovecot a Private Enterprise Number from: http://www.iana.org/cgi-bin/enterprise.pl If Timo hasn't already got one, but I can't see one in: http://www.iana.org/assignments/enterprise-numbers Thoughts? -- Kind Regards, Gavin Henry. Managing Director. T +44 (0) 1224 279484 M +44 (0) 7930 323266 F +44 (0) 1224 824887 E ghenry(a)suretecsystems.com Open Source. Open Solutions(tm). http://www.suretecsystems.com/

3 4

Re: [Dovecot] assertion failed: (fd >= 0)
by Jos Chrispijn 03 Dec '06

03 Dec '06

Saw some messages before that Time wrote that the problem might be in the Dovecot.conf. What I changes was this: -- cut -- auth default { mechanisms = plain passdb passwd-file { args = /letc/deny.%Ls deny = yes } passdb pam { } userdb passwd { } user = root } -- cut -- Did I forget a '{' somewhere? "Jos Chrispijn" wrote in message news:<4572E96B.3030401(a)webrz.net>... > After I activated disabling POP3 for one of my users (not user 'jos'), > the following is in my logfile: > > Dec 3 16:03:33 webrz dovecot: IMAP(jos): Disconnected > Dec 3 16:03:36 webrz dovecot: IMAP(jos): Disconnected in IDLE > Dec 3 16:03:36 webrz dovecot: IMAP(jos): file ioloop.c: line 22 > (io_add): assertion failed: (fd >= 0) > Dec 3 16:03:36 webrz dovecot: child 74197 (imap) killed with signal 6 > > Can someone tell me what is going wrong? > Have a deny.imap file with no users in it and a deny.pop3 file with one > user in it... > > Jos >

1 0

[Dovecot] POP3 protection
by Jos Chrispijn 03 Dec '06

03 Dec '06

I have some users that I will not allow to use POP3 thru my system, but force them to use webmail. Would it be possible to put an extra option in dovecot.conf to force this: # ----------------------------------------------------------------- # Logon processes # user = <username>,<password> # ----------------------------------------------------------------- user = johndoe,another_secret_password user = mike,trouble_in_paradise If unix user johndoe logs on, he cannot fetch mail thru POP3 for he has a differect password from his logon password. thanx for listening, Jos

5 7

Re: [Dovecot] POP3 protection
by Jos Chrispijn 03 Dec '06

03 Dec '06

Odhiambo WASHINGTON: > Okay, Jos is just starting up administering e-mail services. One server, > 79 users max ;) Oke, i got the message; I am a simple home user with an _out_of_hand hobby and no commercial squils @ all :-) > SQL>update users set pop3 = '0' where username = 'jos(a)domain.tld'; > > That is faster than > cd /some/directory/path > vi somefilename > add entries > restart daemon (perhaps) You are quite right. But I still have some bad feelings about an extra sql database cause if this server is offline, my whole mailsystem is down. I fixed my problem with: http://wiki.dovecot.org/Authentication/RestrictAccess It works (thanks Jack and Timo) but now I have another little problem to solve (chaos theory lives!) > Over to you, Jos. I hope that my stupid questions still make sense after all <grin> Jos

1 0

Re: [Dovecot] Can't drop root group privileges
by Jackie Hunt 03 Dec '06

03 Dec '06

An update on my problem dropping root group privileges. I discovered this is a problem for a user if they are in the system group (gid 0). If I remove the user from the system group, and leave them in their primary group, I don't see the error. I've tried setting first_valid_gid to something like 4, hoping dovecot would filter out gid 0, but that doesn't work. Still searching for an answer... Jackie > > Hi all, > > I need your insight. I've been testing Dovecot on an AIX 5.2 > system. Compiled and running fine. We have some users on an > AIX 5.1 system, so I'm working on installing it there, so we > can do further testing. > > I'm using Dovecot 1.0 RC15 with OpenSSL 9.0.7e, configured to use > port 10143 (imap) and 10993 (imaps). The error I'm seeing in the log is: > > dovecot: Nov 28 09:23:54 Info: imap-login: Login: user=<jackie>, method=PLAIN, r > ip=xx.x.xxx.xxx, lip=xxx.xx.xxx.xx, TLS > dovecot: Nov 28 09:23:54 Error: IMAP(jackie): We couldn't drop root group privil > eges (wanted=200, gid=200, egid=0) > dovecot: Nov 28 09:23:54 Error: child 860274 (imap) returned error 89 > > I've seen this error reported on the list, with the suggested resolution > being to set the first_valid_gid = 0 in dovecot.conf. I've tried that, > and nothing changes. > > Any help would be greatly appreciated! > > Jackie > --- > Jackie Hunt > ACNS Voice: (970) 663-3789 > Colorado State University FAX: (970) 491-1958 > Fort Collins, CO 80523 Email: jackie.hunt(a)colostate.edu > Jackie Hunt ACNS Voice: (970) 663-3789 Colorado State University FAX: (970) 491-1958 Fort Collins, CO 80523 Email: jackie.hunt(a)colostate.edu

2 2

Re: [Dovecot] Marking all messages in folder as read doesn't work
by John and Catherine Allen 03 Dec '06

03 Dec '06

> > My only guess is that the imap process doesn't have permissions to > rename the files. >This seems plausible. I'll have another look at the permissions. Timo, On this specific point I cannot see anything wrong on my system. The maildir folders all have permissions 0700 and the messages in all folders 0600. Owner and group are the same throughout all my folders. John -- John Allen Bofferdange, Luxembourg allen(a)vo.lu http://www.homepages.lu/allen

1 0

[Dovecot] small mbox and index files problem
by Paul Shackel 03 Dec '06

03 Dec '06

Dovecot version: 1.0-0_33.rc15 built by atrpms Operating system: Redhat EL4 CPU architecture: x86 Filesystem you used: mailboxs via nfs to fileserver using xfs Just upgraded from 1.0-0_20.rc7 to 1.0-0_33.rc15 built by atrpms and we had previously set mbox_min_index_size to 1024 (1Mb) and now all mailboxes (mbox format) that are under this size are not able to be opened and throw an "Internal error occured. Refer to server log for more information." using either Thunderbird or Outlook Express, both of which are recent versions. The small mailboxes can be opened after turning mbox_min_index_size setting back to 0, at which time it creates indexes. There is nothing in the syslog file. I am looking in the right place as I can see the dovecot startup message. paul --

3 2

[Dovecot] Inactivity, Thunderbird -> bad password
by Peter Veerman 03 Dec '06

03 Dec '06

Hi, I'm running dovecot rc13 now on sparc64, freebsd 6.1-STABLE When i'm connected with my 5 accounts to my dovecot imap over ssl/tls server i get the following message in my logs: Nov 18 15:25:47 Info: imap-login: Disconnected: Inactivity: rip=x.x.x.x, lip=x.x.x.x, TLS My client (thunderbird) then re-requests my password for only one of the 5 accounts. In my dovecot.conf is the following variable set: imap_client_workarounds = delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep

2 8

[Dovecot] Loging folder based information etc?
by Mart Pirita 03 Dec '06

03 Dec '06

Hello. Today one user lost Sent Items folder, seems he deleted it, but I want to be sure. But how? Right now I'm using: login_log_format_elements = %u [%r] %m %c What should I use to see in logs information about created/deleted folders etc? -- Mart

2 1

[Dovecot] Freebsd: fs quota / big maildir
by Geoffroy Desvernay 03 Dec '06

03 Dec '06

I'm testing dovecot as courier-imap replacement. My setup: FreeBSD 6.1 nfs homedirs on FreeBSD server ~/Maildir 's LDAP auth - bind_auth=yes Seems to work well in most cases, but: - No way to read a maildir with 35000+ messages (a freebsd mailing-list for some years) => Nov 21 12:11:42 host dovecot: child 7217 (imap) killed with signal 11 - No way to have quota plugin reporting anything => quotactl(Q_GETQUOTA, /users/group) failed: Operation not supported Any idea ? What did I forget ? What could I do to debug this ? (mail_debug = yes) -- ___________________________________________________________ / Geoffroy DESVERNAY | \ /\ `Service info` | Tel: (+33|0)4 91 05 45 24 /\ \/ Ecole Centrale de Marseille | Fax: (+33|0)4 91 05 45 98 \/ \ (ex-EGIM) | Mail: dgeo(a)ec-marseille.fr / -----------------------------------------------------------

3 3

[Dovecot] Caching passwords?
by Hein Celliers 03 Dec '06

03 Dec '06

Hi all! I need some help....changing passwords....... Dovecot server, appears to cache the old credentials. It only discovers the change upon a restart. I need to know how to configure dovecot (dovecot-1.0-0.beta2.7) as not to cache the passwords. (Using fedora core 5) Thanks Hein Celliers

2 1

Re: [Dovecot] dovecot:IMAP(user) killed with signal 6
by Spil Oss 03 Dec '06

03 Dec '06

Thanks Timo! Since I've been running rc10 again dovecot stopped aborting. By the way, when I used the create_shares.pl script, it created a symlink for every file in the directory to be shared. Simple symlinking the dir seemed to 'almost' work but for the keyword file errors. Upgrading to rc15 fixes the problem as well, the Permission Denied message still comes up, but dovecot no longer aborts. Will try the create_shares.pl script again and see where my symlink-config is wrong. FWIW I wouldn't want any undocumented behaviour in dovecot just because I'm a stupid twat... Kind regards, Spil. On 20/11/06, Spil Oss <spil.oss(a)googlemail.com> wrote: > That's indeed very standard, but it was complaining before (up to > rc10) but not aborting. > > Dovecot keeps resetting the mode and owner on the keyword file > > lrwxr-xr-x 1 user1 user 37 Nov 9 21:48 .MeldWelSpam -> > /home/sharedmail/Maildir/.MeldWelSpam > > $ ls -l /home/sharedmail/Maildir/.MeldWelSpam > total 68 > drwxrwx--- 2 sharedmail sharedmail 1024 Nov 16 16:49 cur > -rw------- 1 user2 sharedmail 50 Nov 16 16:49 dovecot-keywords > -rwxrws--- 1 sharedmail sharedmail 0 Oct 17 15:01 dovecot-shared > -rw-rw---- 1 user2 sharedmail 12451 Nov 16 16:49 dovecot-uidlist > -rw-rw---- 1 sharedmail sharedmail 712 Nov 16 16:51 dovecot.index > -rw-rw---- 1 sharedmail sharedmail 17408 Oct 17 14:58 dovecot.index.cache > -rw-rw---- 1 sharedmail sharedmail 26436 Nov 16 16:51 dovecot.index.log > -rwxrws--- 1 sharedmail sharedmail 0 Oct 17 14:39 maildirfolder > drwxrwx--- 2 sharedmail sharedmail 512 Nov 14 21:41 new > drwxrwx--- 2 sharedmail sharedmail 1536 Nov 16 16:49 tmp > > It seems that whoever gets there first, creates the dovecot-keywords > file with perms 600 and subsequent users of the shared folder are out > of luck. > > # chown sharedmail:sharedmail dovecot-keywords dovecot-uidlist ; chmod > 660 dovecot-keywords > #ls -l dovecot-keywords dovecot-uidlist > -rw-rw---- 1 sharedmail sharedmail 50 Nov 16 16:49 dovecot-keywords > -rw-rw---- 1 sharedmail sharedmail 12451 Nov 16 16:49 dovecot-uidlist > > Moving some folders into the MeldWelSpam folder as user1 > # ls -l dovecot-keywords dovecot-uidlist > -rw------- 1 user1 sharedmail 258 Nov 16 16:57 dovecot-keywords > -rw-rw---- 1 user1 sharedmail 12736 Nov 16 16:57 dovecot-uidlist > > As long as dovecot keeps setting the mode to 600, I can't see how I > get this fixed. > > Spil. > > On 16/11/06, Odhiambo WASHINGTON <odhiambo.raburu(a)wananchi.com> wrote: > > * On 16/11/06 16:17 +0100, Spil Oss wrote: > > | Just upgraded to rc14 and problem persists. > > | > > | On 16/11/06, Spil Oss <spil.oss(a)googlemail.com> wrote: > > | >Hi all, > > | > > > | >After rc10 I have problems with imap and imaps > > | > > > | >Hi all, > > | > > > | >After rc10 I have problems with imap and imaps > > | > > > | >Nov 16 15:42:39 beastie dovecot: IMAP(user1): > > | >open(/home/user1/Maildir/.MeldWelSpam/dovecot-keywords) failed: > > | >Permission denied > > | >Nov 16 15:44:09 beastie dovecot: IMAP(user2): > > | >open(/home/user2/Maildir/.MeldWelSpam/dovecot-keywords) failed: > > | >Permission denied > > | >Nov 16 15:44:09 beastie dovecot: IMAP(user2): file maildir-keywords.c: > > | >line 222 (maildir_keywords_lookup_or_create): assertion failed: > > | >(mk->synced) > > | >Nov 16 15:44:09 beastie dovecot: child 98798 (imap) killed with signal 6 > > | >Nov 16 15:46:10 beastie dovecot: IMAP(user2): > > | >open(/home/user2/Maildir/.MeldWelSpam/dovecot-keywords) failed: > > | >Permission denied > > | >Nov 16 15:46:10 beastie dovecot: IMAP(user2): file maildir-keywords.c: > > | >line 222 (maildir_keywords_lookup_or_create): assertion failed: > > | >(mk->synced) > > | >Nov 16 15:46:10 beastie dovecot: child 98819 (imap) killed with signal 6 > > | > > > | >The Permission denied messages where there in rc10 as well, but that > > | >was not causing problems. These folders are symlinks to shared spam > > | >and ham folders for spamassassin learning. > > | > > > | >Any clue on how to fix this? > > | > > > | >FreeBSD-i386 6.1-RELEASE-p10 > > | >dovecot-1.0.r13 from ports > > > > "Permission Denied" is such a straight error message that you should be > > able to figure out and fix, everything being standard[1] > > > > What are the permissions on that folder (.MeldWelSpam)? > > Is it really owned by user2? > > Dovecot wants to write to it, but is being denied that chance. It should > > be writable by dovecot, I believe. So that folder should be group > > writable and dovecot should be in that group. > > > > But again, perhaps we should see the permissions on the dovecot binary > > also, because dovecot should be writing there "as user2" (suid), yes? > > > > > > [1] I suppose you are installing dovecot using the ports tree and that > > you have not tweaked your box beyond your own comprehension. > > I don't see > > > > > > -Wash > > > > http://www.netmeister.org/news/learn2quote.html > > > > DISCLAIMER: See http://www.wananchi.com/bms/terms.php > > > > -- > > +======================================================================+ > > |\ _,,,---,,_ | Odhiambo Washington <wash(a)wananchi.com> > > Zzz /,`.-'`' -. ;-;;,_ | Wananchi Online Ltd. www.wananchi.com > > |,4- ) )-,_. ,\ ( `'-'| Tel: +254 20 313985-9 +254 20 313922 > > '---''(_/--' `-'\_) | GSM: +254 722 743223 +254 733 744121 > > +======================================================================+ > > > > Garbage In -- Gospel Out. > > >

2 1

[Dovecot] Problem with rc10, perhaps 11-15
by Steven F Siirila 03 Dec '06

03 Dec '06

I don't recall if I mentioned this on the list, but when you are configured with mbox format, and a user has no Dovecot index files yet, and the config is such that mbox_min_index_size is set to non-zero, non-default (128 in my test case), dovecot deliver fails. Commenting out "mbox_min_index_size" fixed the problem, and the indexes then get created. This problems exists in RC10 -- I'm mentioned this in case it still exists in the latest revs so it can get fixed before release. -- Steven F. Siirila Office: Lind Hall, Room 130B Internet Services E-mail: sfs(a)umn.edu Office of Information Technology Voice: (612) 626-0244 University of Minnesota Fax: (612) 626-7593

2 1

[Dovecot] IMAPS works, IMAP does not
by Peter Lindgren 03 Dec '06

03 Dec '06

Hello! I have a simple (I think) problem. I have had IMAPS working fine for a long time. Now I want to start to use IMAP and STARTLS, since my mobile SonyEricsson P900 can't use IMAPS directly. But I can't connect even locally to the IMAP port (143), no-one listens there according to netstat (*.imaps is in LISTEN state). I have the following settings in my /etc/dovecot.conf: protocols = imap imaps ssl_cert_file = /etc/ssl/dovecotcert.pem ssl_key_file = /etc/ssl/private/dovecot.pem disable_plaintext_auth = no login_user = _dovecot login_greeting = Dovecot@casiopea ready. mail_read_mmaped = yes mmap_no_write = no protocol imap { login_greeting_capability = yes } protocol pop3 { } auth_verbose = yes auth default { mechanisms = cram-md5 digest-md5 passdb passwd { } userdb passwd { } user = root } I have restarted (SIGTERM) dovecot to be sure that dovecot is restarted. I still run 1.0beta3 on OpenBSD. TIA, Peter -- Peter Lindgren, dataingenjör E-post: peter "at" norrskenkonsult punkt com http://www.norrskenkonsult.com

2 1

[Dovecot] shared folder
by T. Horsnell 03 Dec '06

03 Dec '06

The dovecot wiki says: The only way to implement shared folders with Dovecot 0.99.x is to create a "shared userid" which all of the users log in to read mail. Does this mean that folders owned by that shared uid can be *simultaneously* manipulated by multiple users logged in to that shared uid? This doesnt seem to be the case on my dovecot-0.99.11-4.EL4 system, and before investigating further I just wanted to check whether it should be possible or not. Cheers, Terry.

2 1

[Dovecot] Nested folders in FS supported yet?
by Sweth Chandramouli 03 Dec '06

03 Dec '06

The last time I checked, dovecot didn't support having nested IMAP folders be implemented via actual nested maildir folders in the filesystem, but that feature was on the "someday maybe it'll happen list", IIRC. I can't find any recent mention of that feature or its absence on the web or in the list archives; is it still on the someday list? (If it isn't implemented yet, does anyone know of an IMAP server that DOES support it?) Thanks, Sweth. -- Sweth Chandramouli sweth(a)ethicalhomes.com - http://EthicalHomes.com/ Thinking about buying a home, but feel like the local real estate market has left you behind? Know others who have the same questions? I teach at homebuying seminars for local housing agencies, and would be glad to help set up a free seminar for your company or organization.

3 2

[Dovecot] Heimdal & gssapi.h
by Chris Wakelin 03 Dec '06

03 Dec '06

I've had some trouble compiling GSSAPI on SuSE Enterprise 9 using Heimdal. It turns out that this installation has /usr/include/heimdal/gssapi.h rather than gssapi/gssapi.h. krb5-config correctly sets -I/usr/include/heimdal in the CFLAGS. Looking back, there was a similar issue a few months ago:- http://www.dovecot.org/list/dovecot/2006-July/014945.html I'm a complete newbie to autotools but here's my attempt at a patch inspired by http://ximbiot.com/cvs/cvshome/dev/patches/gss - which I Googled for ;) I was hampered by the version of aclocal (and possibly the rest of autotools) being out-of-date on SuSE Enterprise 9 ... Chris -- --+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+- Christopher Wakelin, c.d.wakelin(a)reading.ac.uk IT Services Centre, The University of Reading, Tel: +44 (0)118 378 8439 Whiteknights, Reading, RG6 2AF, UK Fax: +44 (0)118 975 3094 --- dovecot-1.0.rc15/configure.in.orig 2006-11-18 23:41:31.000000000 +0000 +++ dovecot-1.0.rc15/configure.in 2006-11-28 15:25:16.889043097 +0000 @@ -1438,6 +1438,12 @@ CFLAGS="$CFLAGS `krb5-config --cflags gssapi`" AC_CHECK_HEADER([gssapi/gssapi.h], [ AC_DEFINE(HAVE_GSSAPI,, Build with GSSAPI support) + AC_DEFINE(HAVE_GSSAPI_GSSAPI_H,, GSSAPI headers in gssapi/gssapi.h) + have_gssapi=yes + ]) + AC_CHECK_HEADER([gssapi.h], [ + AC_DEFINE(HAVE_GSSAPI,, Build with GSSAPI support) + AC_DEFINE(HAVE_GSSAPI_H,, GSSAPI headers in gssapi.h) have_gssapi=yes ]) CFLAGS=$old_CFLAGS --- dovecot-1.0.rc15/config.h.in.orig 2006-11-18 23:42:14.000000000 +0000 +++ dovecot-1.0.rc15/config.h.in 2006-11-28 15:27:24.584537526 +0000 @@ -75,6 +75,12 @@ /* Build with GSSAPI support */ #undef HAVE_GSSAPI +/* GSSAPI headers in gssapi/gssapi.h */ +#undef HAVE_GSSAPI_GSSAPI_H + +/* GSSAPI headers in gssapi.h */ +#undef HAVE_GSSAPI_H + /* Define if you have the iconv() function. */ #undef HAVE_ICONV --- dovecot-1.0.rc15/src/auth/mech-gssapi.c.orig 2006-09-22 15:55:18.000000000 +0100 +++ dovecot-1.0.rc15/src/auth/mech-gssapi.c 2006-11-28 15:37:25.733077117 +0000 @@ -24,7 +24,13 @@ #ifdef HAVE_GSSAPI +#ifdef HAVE_GSSAPI_H +#include <gssapi.h> +#endif + +#ifdef HAVE_GSSAPI_GSSAPI_H #include <gssapi/gssapi.h> +#endif /* Non-zero flags defined in RFC 2222 */ enum sasl_gssapi_qop {

2 1

[Dovecot] dovecot-1.0.rc15 with quota-rewrite on FreeBSD
by Félix Langelier 03 Dec '06

03 Dec '06

Hello, I tried to compile dovecot rc15 from the sources with the quota-rewrite patch (http://dovecot.org/patches/1.0/quota-rewrite.diff) on FreeBSD 6.1, but the compilation stop with the following errors. I am not very good in coding, so if you could fix the patch for FreeBSD it will be great. Making all in trash if /usr/local/bin/bash ../../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../.. -I../../../src/lib -I../../../src/lib-mail -I../../../src/lib-storage -I../../../src/plugins/quota -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT trash-plugin.lo -MD -MP -MF ".deps/trash-plugin.Tpo" -c -o trash-plugin.lo trash-plugin.c; then mv -f ".deps/trash-plugin.Tpo" ".deps/trash-plugin.Plo"; else rm -f ".deps/trash-plugin.Tpo"; exit 1; fi mkdir .libs gcc -DHAVE_CONFIG_H -I. -I. -I../../.. -I../../../src/lib -I../../../src/lib-mail -I../../../src/lib-storage -I../../../src/plugins/quota -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT trash-plugin.lo -MD -MP -MF .deps/trash-plugin.Tpo -c trash-plugin.c -fPIC -DPIC -o .libs/trash-plugin.o trash-plugin.c:103: warning: "struct quota_root_transaction_context" declared inside parameter list trash-plugin.c:103: warning: its scope is only this definition or declaration, which is probably not what you want trash-plugin.c: In function `trash_try_clean_mails': trash-plugin.c:118: error: dereferencing pointer to incomplete type trash-plugin.c: At top level: trash-plugin.c:183: warning: "struct quota_root_transaction_context" declared inside parameter list trash-plugin.c: In function `trash_quota_root_try_alloc': trash-plugin.c:185: error: dereferencing pointer to incomplete type trash-plugin.c:189: error: structure has no member named `try_alloc' trash-plugin.c: At top level: trash-plugin.c:212: warning: "struct quota_root_transaction_context" declared inside parameter list trash-plugin.c: In function `trash_quota_root_try_alloc_bytes': trash-plugin.c:214: error: dereferencing pointer to incomplete type trash-plugin.c:218: error: structure has no member named `try_alloc_bytes' trash-plugin.c: At top level: trash-plugin.c:236: warning: "struct quota_root_transaction_context" declared inside parameter list trash-plugin.c: In function `trash_quota_root_test_alloc_bytes': trash-plugin.c:238: error: dereferencing pointer to incomplete type trash-plugin.c:242: error: structure has no member named `test_alloc_bytes' trash-plugin.c: In function `trash_quota_root_created': trash-plugin.c:277: error: structure has no member named `v' trash-plugin.c:278: error: structure has no member named `v' trash-plugin.c:279: error: structure has no member named `v' trash-plugin.c:280: error: structure has no member named `v' trash-plugin.c:281: error: structure has no member named `v' *** Error code 1 Stop in /usr/home/felix.langelier/sources/dovecot-1.0.rc15/src/plugins/trash. *** Error code 1 Stop in /usr/home/felix.langelier/sources/dovecot-1.0.rc15/src/plugins. *** Error code 1 Stop in /usr/home/felix.langelier/sources/dovecot-1.0.rc15/src. *** Error code 1 Stop in /usr/home/felix.langelier/sources/dovecot-1.0.rc15. *** Error code 1 Stop in /usr/home/felix.langelier/sources/dovecot-1.0.rc15. Thanks in advance. -- Felix Langelier

2 1

[Dovecot] Can't remove folder
by Leroy van Logchem 03 Dec '06

03 Dec '06

Hello, Here is a 'me too' somewhat like: http://www.dovecot.org/list/dovecot/2006-January/010759.html Example scenario: /u/username/Mail/subfolder/somebox subfolder is a directory somebox is a mbox When I use Thunderbird's "Delete folder" function on the somebox the message appears: "Target mailbox doesn't allow inferiour mailboxes". Thunderbird, by default, tries to move it to Trash instead of deleting it directly. When I change the preference to "Remove it immediately" it works. Which component is at fault here: - limitation of a mbox only setup? - thunderbird should know - limitation of the imap protocol to advice the client it's mbox backed - feature of dovecot, could it be fixed or worked around somehow -- Leroy

2 1

[Dovecot] Logging
by Steven F Siirila 03 Dec '06

03 Dec '06

In trying to determine why someone was unable to use port 110 w/STLS (POP) I had great difficulty finding the session in which the user switched to this port from using port 995. This is because Dovecot does not log any port number information. Furthermore, it isn't obvious to me if it logs whether a session was negotiated SSL (via STARTTLS w/IMAP or STLS w/POP) or started out SSL (ports 993 and 995). If this seems reasonable, I can whip up a patch to log this information. However, I'd rather see Dovecot 1.0 released first. -- Steven F. Siirila Office: Lind Hall, Room 130B Internet Services E-mail: sfs(a)umn.edu Office of Information Technology Voice: (612) 626-0244 University of Minnesota Fax: (612) 626-7593

2 1

[Dovecot] authentication
by eric 03 Dec '06

03 Dec '06

Good evening from Aotearoa; First some details: Clients are all Outlook2003 on XP yawn Server is Suse 9.3 Samba, postfix, fetchmail and dovecot 1.0 rc13 I succesfully installed Dovecot on my test network at home, but at the job site its a mystery. I seem to be able to get one client to authenticate but not another. And only if i created a password file consisting of logins and no passwords. Dovecot won't use standard unix passwd successfully. So here is the conf: base_dir = /var/run/dovecot/ protocols = pop3 listen = *:110 disable_plaintext_auth = no ssl_listen = ssl_disable = yes login_dir = /var/run/dovecot/login login_user = dovecot login_greeting = Dovecot ready. mail_extra_groups = users mail last_valid_uid = 2000 pop3_uidl_format = %08Xu%08Xv protocol lda { # Address to use when sending rejection mails. postmaster_address = postmaster(a)example.com } auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@ auth_debug_passwords = yes auth default { mechanisms = plain passdb passwd-file { args = /usr/local/etc/passwords } userdb passwd { } user = root default_mail_env = mbox:/var/spool/mail/:INBOX=/var/spool/mail/%u And here is a sample of two of the syslogs.: I am not worried about the UID warning,I was try to login on from various clients. Though this is not a requirement. Sample of Mail log Nov 30 18:30:27 SCSIServer dovecot: POP3(user): Couldn't open INBOX: Internal error occurred. Refer to server log for more information. [2006-11-30 18:30:27] Nov 30 18:19:50 SCSIServer dovecot: pop3-login: Login: user=<user1>, method=PLAIN, rip=192.168.1.113, lip=192.168.1.199 Nov 30 18:19:50 SCSIServer dovecot: POP3(user1): UIDVALIDITY changed (1164764972 -> 1164774199) in mbox file /var/spool/mail/user1 Nov 30 18:19:50 SCSIServer dovecot: POP3(user1): Disconnected: Mailbox is in inconsistent state. top=0/0, retr=0/0, del=0/0, size=0 Nov 30 18:20:04 SCSIServer dovecot: auth(default): client in: AUTH 1 PLAIN service=POP3 lip=192.168.1.199 rip=192.168.1.113 resp=AG9saXZpYQA= Nov 30 18:20:46 SCSIServer dovecot: pop3-login: Login: user=<user2>, method=PLAIN, rip=192.168.1.115, lip=192.168.1.199 Nov 30 18:20:46 SCSIServer dovecot: POP3(user2): open() failed with index file /var/spool/mail/.imap/INBOX/dovecot.index: Permission denied Nov 30 18:20:46 SCSIServer dovecot: POP3(user2): open() failed with index file /var/spool/mail/.imap/INBOX/dovecot.index: Permission denied Nov 30 18:20:46 SCSIServer dovecot: POP3(user2): Couldn't open INBOX: Internal error occurred. Refer to server log for more information. Warn log; Nov 30 18:30:27 SCSIServer dovecot: POP3(user2): open() failed with index file /var/spool/mail/.imap/INBOX/dovecot.index: Permission denied Nov 30 18:30:27 SCSIServer dovecot: POP3(user2): Couldn't open INBOX: Internal error occurred. Refer to server log for more information. [2006-11-30 18:30:27] It just occured to me these leading blanks in the conf file may effect, I am sure I read that somewhere to do with one of these things? Any other ideas would be greatly appreciated.

2 1

[Dovecot] mysql +update
by SysOp 03 Dec '06

03 Dec '06

Hi all, how to put in databaswe (mysql) some information after login dovecot can only get information from database (user_query, password_query) exist some query to put in, for example last login date into database ? Maciek

2 1

[Dovecot] method= in log file
by Luigi Rosa 03 Dec '06

03 Dec '06

In Dovecot log I have: Nov 30 20:35:16 xx dovecot: pop3-login: Login: user=<xxx>, method=PLAIN, rip=x.x.x.102, lip=y.y.y.53 Nov 30 20:35:16 xx dovecot: imap-login: Login: user=<xxx>, method=plain, rip=x.x.x.102, lip=y.y.y.53 Apart the protocol (IMAP and POP3) is there a difference between "method=PLAIN" and "method=plain"? Ciao, luigi -- / +--[Luigi Rosa]-- \ 667: The neighbor of the beast.

2 1

[Dovecot] Problems using Squirrelmail / Dovecot / Sendmail / Fedora Core 6 - ERROR: Connection dropped by IMAP server
by Alexander Lapajne 03 Dec '06

03 Dec '06

Hello I just installed Fedora Core 6 and I'm having problems with SquirrelMail. I'm using Squirrelmail/Dovecot/Sendmail and when I log into Squirrelmail and try to view any folder that contains any messages I get: ERROR: Connection dropped by IMAP server. Query: SORT (ARRIVAL) ISO-8859-1 ALL Now, I've tried to disable server side sorting in Squirrelmail but that only leads to a new error message: ERROR: Connection dropped by IMAP server. Query: FETCH 1:* (FLAGS UID RFC822.SIZE INTERNALDATE BODY.PEEK[HEADER.FIELDS (Date To Cc From Subject X-Priority Importance Priority Content-Type)]) I'm using the default setup and POP3 mail is working. Using Thunderbird I can read email using POP3. So the problem only appears when using Squirrelmail. I had the exact same setup in Fedora Core 5 and it was working perfectly. Same config files and everything. _________________________________________________________ Flyger tiden iväg? Fånga dagen med Yahoo! Mails inbyggda kalender. Dessutom 250 MB gratis, virusscanning och antispam. Få den på: http://se.mail.yahoo.com

2 1

[Dovecot] Auth process died too early
by Kenny Dail 03 Dec '06

03 Dec '06

Hello all, Trying an Install of Dovecot 1.0rc15. We have previously used 1.0b8 without too many troubles. starting Dovecot 1.0rc15 yields: Dec 1 16:31:08 mailtest1 dovecot: Dovecot v1.0.rc15 starting up Dec 1 16:31:09 mailtest1 dovecot: pop3-login: Aborted login: rip=172.30.0.3, lip=172.30.0.30 Dec 1 16:31:09 mailtest1 dovecot: Auth process died too early - shutting down Dec 1 16:31:09 mailtest1 dovecot: auth(default): Socket already exists: /var/run/dovecot/auth-client Dec 1 16:31:09 mailtest1 last message repeated 7 times Dec 1 16:31:09 mailtest1 dovecot: child 14664 (auth) returned error 89 Dec 1 16:31:09 mailtest1 dovecot: child 14665 (auth) returned error 89 Dec 1 16:31:09 mailtest1 dovecot: child 14666 (auth) returned error 89 Dec 1 16:31:09 mailtest1 dovecot: child 14667 (auth) returned error 89 Dec 1 16:31:09 mailtest1 dovecot: child 14668 (auth) returned error 89 Dec 1 16:31:09 mailtest1 dovecot: child 14669 (auth) returned error 89 Dec 1 16:31:09 mailtest1 dovecot: child 14670 (auth) returned error 89 Dec 1 16:31:09 mailtest1 dovecot: child 14671 (auth) returned error 89 Dec 1 16:31:09 mailtest1 dovecot: child 14672 (auth) returned error 89 Dec 1 16:31:09 mailtest1 dovecot: auth(default): Socket already exists: /var/run/dovecot/auth-client Dec 1 16:31:09 mailtest1 dovecot: Temporary failure in creating login processes, slowing down for now Dec 1 16:31:09 mailtest1 dovecot: I/O leak: 0x804d720 (47) and then it dies. Any thoughts on that which I am doing wrong? dovecot.conf currently looks like such: protocols = imap imaps pop3 pop3s disable_plaintext_auth = no login_greeting = amigo.net ready. mail_location = maildir:%h/Maildir namespace private { separator = . prefix = INBOX. inbox = yes hidden = no } mail_extra_groups = mail mmap_disable = yes lock_method = dotlock first_valid_uid = 465 valid_chroot_dirs = /var/mail/virtual maildir_copy_with_hardlinks = yes protocol imap { mail_plugins = quota imap_quota trash login_greeting_capability = yes imap_client_workarounds = outlook-idle } protocol pop3 { pop3_uidl_format = %08Xu%08Xv mail_plugins = quota pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } protocol lda { postmaster_address = postmaster(a)amigo.net } auth_default_realm = amigo.net auth_username_translation = %@ auth_username_format = %Ln@%d auth_worker_max_count = 60 auth default { mechanisms = plain login apop digest-md5 cram-md5 passdb sql { args = /etc/dovecot/dovecot-sql.conf } userdb prefetch { } user = vmail count = 10 socket listen { master { path = /var/run/dovecot/auth-master mode = 0660 user = postfix group = mail } client { path = /var/run/dovecot/auth-client mode = 0660 } } } plugin { quota = maildir trash = /etc/dovecot/dovecot-trash.conf } Dovecot-sql.conf: driver = mysql connect = host=myhost dbname=mydb user=myuser password=mypass password_query = SELECT username as user, clearpw as password, home as userdb_home, uid as userdb_uid, gid as userdb_gid FROM EmailAccounts where username = '%u' -- Kenny Dail <kend(a)amigo.net>

2 1

Re: [Dovecot] POP3 protection
by Jos Chrispijn 03 Dec '06

03 Dec '06

Odhiambo WASHINGTON: > Use a database and create an imap_enable field that is 1 if enabled and > 0 if disabled and use this condition in the query. Actually I am suggesting to let go SQL only for that and do it with a simple, plain text solution from within the configuration file. That can't be that difficult can it? It Postfix can do stuff with sender_checks and client_checks why using a database for a simple 0 or 1 :-) thanks for your reply, Floor

3 6

[Dovecot] %s service variable substitution
by Jim Horner 02 Dec '06

02 Dec '06

I'm using 1.0rc15. We switched over to using deliver LDA and using dovecot's sasl implementation for postfix... In our ldap configuration we were using (similar for password filter) user_filter = (&(objectClass=mailUser)(mail=%u)(mailSettingValue=%s)) The problem is these new services, namely deliver and postfix, are accessing the authentication mechanisms and I am not sure what to put in ldap so the %s can match. Each user currently only has a mailSettingValue=IMAP. This can be expanded for multiple entries. Thanks, Jim

1 1

[Dovecot] Quota's with Thunderbird
by Richard Mayhew - Nashua Mobile Broadband Division 30 Nov '06

30 Nov '06

Hi, Does anyone know how to get Thunderbird to correctly report the mailbox quota's? I know Dovecot is correctly enforcing the quotas on the mailbox when using Thunderbird, but Thunderbird reports that the "server does not support quota's" when trying to view the usage? Is Thunderbird expecting something different? Viewing the mailbox through Squirelmail, the quota's are reported correctly, so I would thnk that Thunderbird is where the problem lies. Regards Richard

3 3

[Dovecot] update quota
by Alex 30 Nov '06

30 Nov '06

I'm working with last dovecot r15 and exim 4.63 When I download my emails, pop3, dovecot not upadtes the maildirsize file

2 1

[Dovecot] lmtp: help needed
by Leonardo Lanzi 30 Nov '06

30 Nov '06

Hi all, parsing the mailing list archive, it seems that the lmtp-server will not be developed soon, so I'm looking for someone that could help me in writing one, even if not the best one. That's why: I've just started to study dovecot, as I was recruited, just about forced, to help The System Manager of our University in the global e-mail migration - more than 37'000 users, 440 mailing lists, everything synchronized with administrative databases and so on - from open-vms (yes... you have not sight problems: OpenVMS ... please don't blame us). In particular, we have (we'd like so much) to directly deliver from a front-end load-balanced anti-spam&virus all "good" messages into maildirs, updating at the same time the indexes for dovecot. Our idea is to write an lmtp, possibly not from scratch; we have already a threaded server, recently born as a raw smtp server to test the antivirus and antispam system under heavy load (before to start the migration), that can be converted to lmtp protocol, but we lack of information on the dovecot API for delivering in a "dovecot-way". As often occurs, we have not months to get it done, therefore _any_ kind of suggestion will be very much appreciated. Thank you all for the help, and patience! -- Leonardo Lanzi Department of Physics - University of Florence - Italy -- PS - Examples of help: 1. "The code is self-explaining, but obviously you're too old to learn: accept to be in the mist, and switch to cyrus" 2. "the following n-functions ... of deliver can accept your data from memory and do all the job" 3. "I've already done everything, download it at the following url..." 3a. "I've already done everything, but you must send me, _before_, your smtp stressing server, or all your tests on latency of irq handlers with 2.6 kernel, or at least one 18-year-old scottish-malt-whisky bottle!"

3 3

[Dovecot] Subfolders with Thunderbird and maildir?
by Andrew Z 30 Nov '06

30 Nov '06

I setup a test dovecot-1.0-0.beta8.2.fc5 and left most of the settings as the defaults. In Thunderbird 1.5.0.8 Windows, when I tried to create a subfolder named "subfolder" under INBOX, it showed up as the same level a INBOX and with the name "INBOX^subfolder". I was able to manually create a subfolder using "mkdir ~/mail/test_manual_subfolder; touch ~/mail_test_subfolder/blah" and then subscribing to it. That's too much work. :) Now when I try to create a subfolder of a non-inbox folder, nothing happens (not even an error). Screen shot: http://img452.imageshack.us/my.php?image=subfoldersthunderbird15ao6.png The Dovecot system is Fedora Core 5 x86 and an NFS client for /home. I'm considering switching from Trustix, UW-IMAP, and mbox. I'm also considering changing INBOX to a Maildir (not /var/spool/mail/%u). Andrew

2 2

[Dovecot] MAILDIR environment
by adcx＠server101.com 29 Nov '06

29 Nov '06

from docs/mail-storages.txt: "Also as a special case, if MAILDIR environment exists, maildir storage is used with the directory specified in it." Forgive me if this seems obvious, but is this talking about setting MAILDIR as an enivornment variable? I have it set on my system in both /etc/profile and ~/.bash_profile: MAILDIR=/path/to/maildir/ export MAILDIR and have confirmed this worked by running 'echo $MAILDIR'. I've logged the user in question out and then in again, as well as restarting dovecot but it still defaults to checking ~/Maildir when the user logs in. Setting the location using default_mail_env is not an option here as I need the fallback behaviour that occurs when default_mail_env is not set. Any advice appreciated.

2 1

[Dovecot] Redundant shared mail store?
by Jasper Bryant-Greene 29 Nov '06

29 Nov '06

Hi guys I'm about to embark on a project replacing a legacy single mail server running proprietary software with a cluster of Dovecot servers. We clearly need a shared mail store for these servers, but we are not happy with simply using a server running NFS as this becomes a single point of failure. What have other people used? AFAICT our options are: * A shared block device (Fibre Channel, iSCSI, ATAoE etc) running GFS or similar to allow multiple servers to access it concurrently * Two or more NFS units, either with built-in support for replication of FS changes and failover, or with scripts for achieving this functionality I prefer option 1, although it's expensive. What have other people used? Do we have other options? TIA -- Jasper Bryant-Greene Director Album Limited jasper(a)albumltd.co.nz +64 21 708 334 / 0800 425 286 http://www.albumltd.co.nz/

4 3

[Dovecot] Quota problems on uidlist files
by James Nunnerley 29 Nov '06

29 Nov '06

Hi All, Please excuse me for this somewhat a slightly uneducated explanation of a problem we are experiencing. I'm more a web developer rather than a sysadmin, and have only recently been looking at how exactly dovecot works. We're having a problem when users/groups quotas are reached on our server platform. Our platform bases quotas on groups - i.e. domains, so a single user has a user username and group of their domain; and the domain has a set amount of space available. This means that if they then try and access their email, via either imap or in most cases webmail, it would seem that dovecot is unable to create the dovecot-uidlist file - which makes complete sense, because it's running as that user and under the group as detailed above.. We've tried changing a pre-existing file to have group ownership of nobody, but from what we can gather, this file is not actually updated, but deleted and recreated when changes occur. One solution would be to take the dovecot-uidlist file out of the mail directory structure, on which the quotas are enforced, but this is not configurable in dovecot. Alternatively, having someway of changing to ownership of the file would also get around this problem. Does anyone have any experience of either a work around for this, or something which we can change in dovecot that will allow users to create a dovecot file, even if they are over quotas? Many thanks James James Nunnerley Applications Developer Namesco Limited

2 1

[Dovecot] [Fwd: Re: Authentication]
by "M. Tolga Özses" 29 Nov '06

29 Nov '06

Sorry, I forgot to Reply all -------- Original Message -------- Subject: Re: [Dovecot] Authentication Date: Wed, 29 Nov 2006 09:49:42 +0200 From: "M. Tolga Özses" <mtozses(a)sabanciuniv.edu> To: eric <eric(a)ccat.co.nz> References: <456D3221.2030900(a)ccat.co.nz> eric wrote: > Try as I may, I cannot get Dovecot to allow anything but blank > passwords listed in a custom file I made for the purpose. It will not > recognise anybody in passwd. > Only using POP3 on an internal network so little danger of incursions. > Once I created a password file with user names and no password, one > user could login (from Outlook 2003) but another could not. > Telnet test also fails to authenticate. > > I have allowed the group to write to the /var/spool/folder > Syslog simply showed authentication failed. > Relevant bits of my config: > disable plain text = no It is disable_plaintext_auth = no for me, and it works well > mail extra group = users It should be mail_extra_groups = mail, same > pop3 uidl format %08Xu%08Xv pasted direct from the help > I have un commented auth user name characteres > mechanisms = plain > and I have set auth debug passwords = yes > user = root > > System: Suse 9.3 > Dovecot 1.0 rc13 > > Any ideas? > > -- M. Tolga Özses Bilgi Teknolojisi Sabanci Üniversitesi Orhanli 34956 Tuzla Istanbul Tel: (216) 483 91 98 Web: http://people.sabanciuniv.edu/mtozses -- M. Tolga Özses Bilgi Teknolojisi Sabanci Üniversitesi Orhanli 34956 Tuzla Istanbul Tel: (216) 483 91 98 Web: http://people.sabanciuniv.edu/mtozses

3 2

[Dovecot] Keep getting this
by Brent Clark 29 Nov '06

29 Nov '06

Hey all I just installed logcheck and with the result im seeing quiet a few of these. Nov 28 16:59:11 mail dovecot: IMAP(user): file ioloop.c: line 22 (io_add): assertion failed: (fd >= 0) My question is, is it something I need to be concerned about, and also is there something I can do to help dovecot. Kind Regards Brent Clark

3 2

[Dovecot] Extra_fields / first check userdb?
by Leroy van Logchem 29 Nov '06

29 Nov '06

Hi, I would like to supply a few users with extra_fields. All users are found by PAM first so the userdb passwd-file doesnt seem to be used. How to alter the lookup sequence? We can't remove the accounts from the central passwd, just for Dovecot. Thanks, Leroy

2 2

[Dovecot] Authentication
by eric 29 Nov '06

29 Nov '06

Try as I may, I cannot get Dovecot to allow anything but blank passwords listed in a custom file I made for the purpose. It will not recognise anybody in passwd. Only using POP3 on an internal network so little danger of incursions. Once I created a password file with user names and no password, one user could login (from Outlook 2003) but another could not. Telnet test also fails to authenticate. I have allowed the group to write to the /var/spool/folder Syslog simply showed authentication failed. Relevant bits of my config: disable plain text = no mail extra group = users pop3 uidl format %08Xu%08Xv pasted direct from the help I have un commented auth user name characteres mechanisms = plain and I have set auth debug passwords = yes user = root System: Suse 9.3 Dovecot 1.0 rc13 Any ideas? -- John McC

1 0

Re: [Dovecot] considering dovecot
by Rick Hazey 29 Nov '06

29 Nov '06

On Nov 28, 2006, at 3:43 PM, Ejay Hire wrote: > Hello. What email client do you use? Most of the one's I've used (on > Windows) choke at 5k. Our users tend to use one of the following: Apple Mail Entourage (basically Outlook for Mac) Outlook Outlook Express Thunderbird and then there's the webmail system we provide. Apple Mail has virtually no limit on messages it will handle. I currently have over 500,000 emails in my Apple Mail. It stores email much like Dovecot; each email is in a separate file. This makes backups a breeze, which a reason to switch to a server that uses maildir. Entourage, Outlook Express and Outlook have problems if the data file exceeds 2GB. This is an ongoing problem and I'm hoping by keeping email on the server, the support headaches will be reduced. I'm not sure what limits Thunderbird has. I use Thunderbird to connect to the main directory for all email and it doesn't seem to have any trouble handling it. Currently, everyone is using POP3 but I want to move to IMAP. (Thunderbird is the only client that connects via IMAP on our systems) The motivation for moving to IMAP is primarily for spam handling. Instead of users contacting us for emails that might be caught as spam, the spam will be moved to a "junk mail" folder. Then the user can peruse the folder themselves to find any legit email improperly categorized as junk. Vacation messages is the other item that is prompting a change. Everyone is screaming for that feature.

1 0

[Dovecot] Can't drop root group privileges
by Jackie Hunt 28 Nov '06

28 Nov '06

Hi all, I need your insight. I've been testing Dovecot on an AIX 5.2 system. Compiled and running fine. We have some users on an AIX 5.1 system, so I'm working on installing it there, so we can do further testing. I'm using Dovecot 1.0 RC15 with OpenSSL 9.0.7e, configured to use port 10143 (imap) and 10993 (imaps). The error I'm seeing in the log is: dovecot: Nov 28 09:23:54 Info: imap-login: Login: user=<jackie>, method=PLAIN, r ip=xx.x.xxx.xxx, lip=xxx.xx.xxx.xx, TLS dovecot: Nov 28 09:23:54 Error: IMAP(jackie): We couldn't drop root group privil eges (wanted=200, gid=200, egid=0) dovecot: Nov 28 09:23:54 Error: child 860274 (imap) returned error 89 I've seen this error reported on the list, with the suggested resolution being to set the first_valid_gid = 0 in dovecot.conf. I've tried that, and nothing changes. Any help would be greatly appreciated! Jackie --- Jackie Hunt ACNS Voice: (970) 663-3789 Colorado State University FAX: (970) 491-1958 Fort Collins, CO 80523 Email: jackie.hunt(a)colostate.edu

1 0

[Dovecot] POP3 && Folders
by Timothy White 28 Nov '06

28 Nov '06

I'm sure this has come up on the list before... I have a number of accounts normally only accessed via IMAP, and for this reason, there is a global sieve script for all users (also required for the spam filtering). What this means though, is that ever users has 3-4 set folders, that are forced on. I now have a few users that want to use POP3. Is there a way to make it download all messages, in all folders, rather than just the inbox? I'm using Maildir's Thanks Tim -- Linux Counter user #273956 Don't email joeblogs(a)scouts.org.au

2 1

[Dovecot] dovecot-1.0.rc13 LDA
by Peter Bauer 26 Nov '06

26 Nov '06

Hello, I've installed dovecot-1.0.rc13 on FreeBSD-6.1 with LDA support. But I didn't found the /var/run/dovecot/auth-master file on my system. I need this file for the protocol lda { ... auth_socket_path = /var/run/dovecot-auth-master ... } settings in the /usr/local/etc/dovecot.conf. Does anyone has an idea? PS: On a older installation (dovecot-1.0.rc7) the file exists and works very well. Thanks. -- Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! Ideal für Modem und ISDN: http://www.gmx.net/de/go/smartsurfer

3 4

[Dovecot] Dovecot, Postfix, Mysql and Virtual Users
by Justin Sung Kim 25 Nov '06

25 Nov '06

Hi, I am looking for a guide or manual to implement Dovecot, Postfix, Mysql and postfixadmin to manage virtual users. Can I get a help from someone? The main issue for me is the SMTP authentication with Mysql. postfixadmin stores the password in md5. How can you make that so it works on both smtp and dovecot? Please help me out. I am stuck with installing and re-installing. Thank you in advance. Justin.

2 1

[Dovecot] Thanks! Migration UWimap -> Dovecot report
by Leroy van Logchem 25 Nov '06

25 Nov '06

Best Dovecot devs, We moved from UW-imap&pop3 to Dovecot this morning (~500 accounts) and reduced our traffic from the home directory server to the imap server bigtime: | 22 Nov| 0.1 0.8| 0.0 0.0| 0.4 0.5| 1550.6 42.9| 1557.3 67.9| | 23 Nov| 0.3 1.0| 0.0 0.1| 0.4 0.6| 1331.8 37.3| 1337.2 46.3| | 24 Nov| 0.0 0.4| 0.0 0.0| 0.2 0.2| 186.8 8.8| 188.9 9.2| Yesterday and the day before we averaged 1.35 TB of NFS traffic for all the remote imap folders (mbox format) while today we only use 1/10th :) Also the lazy purge and writes are absolutly fast now, thanks! One question: Our pop3 users recieved all mail while 'leave mail on server' was enabled -it didnt delete it-. After one such run it's fine. Any idea to improve a uw/ipop3d migration for the next time? <dovecot.conf of rc15> pop3_uidl_format = %08Xu%08Xv pop3_client_workarounds = outlook-no-nuls oe-ns-eoh -- Leroy

2 1

Re: [Dovecot] dovecont.conf and "Evolution Mail" configuration
by maria.freixes_graells＠alcatel.es 24 Nov '06

24 Nov '06

> Please....I am lost completly!! Could anyone help me to solve the > question of how can I configure the mail in my linux machine.... > The scenarious is that this linux machine with red had enterprise > linux 4 receives mail from another machine via sendmail. This mail is > saved into /var/spool/mail/ directori, the user is webmaster. > But I want that the mails into /var/spool/mail/webmaster are sended to > the "evolution mail" via pop protocol. > Any idea? > If you could weaste some time with me, I be very gratefully for it!! > Thanks a lot, > Maria > > maria.freixes_graells(a)alcatel.es escribió: >> Hello people!! >> >> First, thanks very much to Ejay Hire and to John Peacock for your >> quickly answer!! >> >> Now, I've dovecot installed, I downloaded the source and I compiled >> them. It's running ok now. >> >> But.....as I am new in all these issues I have some problems with the >> configuration. >> >> I have a user called "webmaster" that have a mail into >> /var/spool/mail, I want to redirect these mails to the "Evolution >> Mail" program from my Linux Desktop. >> I have doubts in two ways: >> >> 1.- Is the dovecot.conf file correct? >> 2.- Are the "Evolution Mail" setting correct? >> >> Evolution Account Settings: >> Name: webmaster(a)bar.ses.alcatel.es >> Full Name: webmaster >> Email Address: webmaster(a)bar.ses.alcatel.es >> Server Type: POP >> Host: 159.23.98.66 >> Username: webmaster >> Server Type: SMTP >> Server Configuration: 159.23.98.66 >> >> >>

4 7

Re: [Dovecot] Question regarding bounce messages on quota full. [solved]
by Mustafa A. Hashmi 24 Nov '06

24 Nov '06

On 11/14/06, Mustafa A. Hashmi <mahashmi(a)gmail.com> wrote: In the following section: > auth default { > mechanisms = plain > > socket listen { > master { > path = /var/run/dovecot-auth-master > mode = 0600 > user = vmail # User running Dovecot LDA > #group = mail # Or alternatively mode 0660 + LDA user in this group > } > } > > passdb pam { > > } > > # LDAP database > userdb ldap { > args = /etc/dovecot/dovecot-ldap.conf > } > user = root # <<-- wrong > } user = vmail fixes the issue. Apologies about the noise. Thanks all. Regards, -- Mustafa A. Hashmi mahashmi(a)gmail.com mh(a)stderr.net

2 2

[Dovecot] mailadm? authentication vs. authorization?
by David Lee 24 Nov '06

24 Nov '06

Does "dovecot" have anything similar to the UW IMAP "mailadm" group operation? From near the end of: http://www.washington.edu/imap/documentation/RELNOTES.html 'Support for SASL authentication identity vs. authorization identity in the IMAP and POP3 servers. If the user indicated by the authentication identity is in the "mailadm" group, he may specify any authorization identity and get logged in as the authorization identity user.' This allows an email administrator (member of group "mailadm") to sort out problems in a user's mailbox as that user identifier. (We try to train our users not to reveal their password to anyone, not even to our own staff. But sometimes, as staff, it is very useful to be able to do operations as a particular user to diagnose a problem.) -- : David Lee I.T. Service : : Senior Systems Programmer Computer Centre : : Durham University : : http://www.dur.ac.uk/t.d.lee/ South Road : : Durham DH1 3LE : : Phone: +44 191 334 2752 U.K. :

2 1

[Dovecot] LDAP authentication windows 2003
by Matheus Antonio Oliveira 24 Nov '06

24 Nov '06

1 0

[Dovecot] Two email accounts writing to one nfs shared home directory
by John McDonald 23 Nov '06

23 Nov '06

I use dovecot as a local imap server on my desktop machine due to the fact that my workplace only support POP3. I use fetchmail to pop, postfix to deliver, and dovecot for client access. At present I have a single email account which is the same as my system login and have postfix and dovecot setup to use ~/Maildir. The home directories on our system are served from a central file system, using nfs, which has full backup/disaster recovery policy implemented. I now need to setup a second separate email account for a specific task. Our sysadmins have setup this account for me on the POP3 server. The problem is that this account does not have a home directory on our system and therefore I can't write to ~/Maildir. What I would like to do is setup the same type of system for this second account without necessitating the creation of a home directory. That is, I would like a second Maildir folder in my own user account to which this second email account's messages are delivered. This way I will have full backup of the messages. What is the most straightforward way of achieving this? (or can it be done at all?) Thanks for the help. Regards, John McDonald.

3 2

[Dovecot] dovecont.conf and "Evolution Mail" configuration
by maria.freixes_graells＠alcatel.es 23 Nov '06

23 Nov '06

Hello people!! First, thanks very much to Ejay Hire and to John Peacock for your quickly answer!! Now, I've dovecot installed, I downloaded the source and I compiled them. It's running ok now. But.....as I am new in all these issues I have some problems with the configuration. I have a user called "webmaster" that have a mail into /var/spool/mail, I want to redirect these mails to the "Evolution Mail" program from my Linux Desktop. I have doubts in two ways: 1.- Is the dovecot.conf file correct? 2.- Are the "Evolution Mail" setting correct? Evolution Account Settings: Name: webmaster(a)bar.ses.alcatel.es Full Name: webmaster Email Address: webmaster(a)bar.ses.alcatel.es Server Type: POP Host: 159.23.98.66 Username: webmaster Server Type: SMTP Server Configuration: 159.23.98.66 ## Dovecot configuration file # If you're in a hurry, see http://wiki.dovecot.org/QuickConfiguration # '#' character and everything after it is treated as comments. Extra spaces # and tabs are ignored. If you want to use either of these explicitly, put the # value inside quotes, eg.: key = "# char and trailing whitespace " # Default values are shown for each setting, it's not required to uncomment # any of the lines. Exception to this are paths, they're just examples with # the real defaults being based on configure options. The paths listed here # are for configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var # --with-ssldir=/etc/ssl # Base directory where to store runtime data. #base_dir = /var/run/dovecot/ # Protocols we want to be serving: imap imaps pop3 pop3s # If you only want to use dovecot-auth, you can set this to "none". protocols = imap imaps pop3 pop3s # IP or host address where to listen in for connections. It's not currently # possible to specify multiple addresses. "*" listens in all IPv4 interfaces. # "[::]" listens in all IPv6 interfaces, but may also listen in all IPv4 # interfaces depending on the operating system. # # If you want to specify ports for each service, you will need to configure # these settings inside the protocol imap/pop3 { ... } section, so you can # specify different ports for IMAP/POP3. For example: # protocol imap { # listen = *:10143 # ssl_listen = *:10943 # .. # } # protocol pop3 { # listen = *:10100 # .. # } #listen = * # Disable LOGIN command and all other plaintext authentications unless # SSL/TLS is used (LOGINDISABLED capability). Note that if the remote IP # matches the local IP (ie. you're connecting from the same computer), the # connection is considered secure and plaintext authentication is allowed. #disable_plaintext_auth = yes # Should all IMAP and POP3 processes be killed when Dovecot master process # shuts down. Setting this to "no" means that Dovecot can be upgraded without # forcing existing client connections to close (although that could also be # a problem if the upgrade is eg. because of a security fix). This however # means that after master process has died, the client processes can't write # to log files anymore. #shutdown_clients = yes ## ## Logging ## # Use this logfile instead of syslog(). /dev/stderr can be used if you want to # use stderr for logging (ONLY /dev/stderr - otherwise it is closed). #log_path = # For informational messages, use this logfile instead of the default #info_log_path = # Prefix for each line written to log file. % codes are in strftime(3) # format. #log_timestamp = "%b %d %H:%M:%S " # Syslog facility to use if you're logging to syslog. Usually if you don't # want to use "mail", you'll use local0..local7. Also other standard # facilities are supported. #syslog_facility = mail ## ## SSL settings ## # IP or host address where to listen in for SSL connections. Defaults # to above if not specified. #ssl_listen = # Disable SSL/TLS support. ssl_disable = yes # PEM encoded X.509 SSL/TLS certificate and private key. They're opened before # dropping root privileges, so keep the key file unreadable by anyone but # root. Included doc/mkcert.sh can be used to easily generate self-signed # certificate, just make sure to update the domains in dovecot-openssl.cnf #ssl_cert_file = /etc/ssl/certs/dovecot.pem #ssl_key_file = /etc/ssl/private/dovecot.pem # If key file is password protected, give the password here. Alternatively # give it when starting dovecot with -p parameter. #ssl_key_password = # File containing trusted SSL certificate authorities. Usually not needed. # The CAfile should contain the CA-certificate(s) followed by the matching # CRL(s). CRL checking is new in dovecot .rc1 #ssl_ca_file = # Request client to send a certificate. #ssl_verify_client_cert = no # How often to regenerate the SSL parameters file. Generation is quite CPU # intensive operation. The value is in hours, 0 disables regeneration # entirely. #ssl_parameters_regenerate = 168 # SSL ciphers to use #ssl_cipher_list = ALL:!LOW # Show protocol level SSL errors. #verbose_ssl = no ## ## Login processes ## # Directory where authentication process places authentication UNIX sockets # which login needs to be able to connect to. The sockets are created when # running as root, so you don't have to worry about permissions. Note that # everything in this directory is deleted when Dovecot is started. #login_dir = /var/run/dovecot/login # chroot login process to the login_dir. Only reason not to do this is if you # wish to run the whole Dovecot without roots. # http://wiki.dovecot.org/Rootless #login_chroot = yes # User to use for the login process. Create a completely new user for this, # and don't use it anywhere else. The user must also belong to a group where # only it has access, it's used to control access for authentication process. # Note that this user is NOT used to access mails. # http://wiki.dovecot.org/UserIds login_user = linus # Set max. process size in megabytes. If you don't use # login_process_per_connection you might need to grow this. #login_process_size = 32 # Should each login be processed in it's own process (yes), or should one # login process be allowed to process multiple connections (no)? Yes is more # secure, espcially with SSL/TLS enabled. No is faster since there's no need # to create processes all the time. #login_process_per_connection = yes # Number of login processes to keep for listening new connections. #login_processes_count = 3 # Maximum number of login processes to create. The listening process count # usually stays at login_processes_count, but when multiple users start logging # in at the same time more extra processes are created. To prevent fork-bombing # we check only once in a second if new processes should be created - if all # of them are used at the time, we double their amount until the limit set by # this setting is reached. #login_max_processes_count = 128 # Maximum number of connections allowed per each login process. This setting # is used only if login_process_per_connection=no. Once the limit is reached, # the process notifies master so that it can create a new login process. # You should make sure that the process has at least # 16 + login_max_connections * 2 available file descriptors. #login_max_connections = 256 # Greeting message for clients. #login_greeting = Dovecot ready. # Space-separated list of elements we want to log. The elements which have # a non-empty variable value are joined together to form a comma-separated # string. #login_log_format_elements = user=<%u> method=%m rip=%r lip=%l %c # Login log format. %$ contains login_log_format_elements string, %s contains # the data we want to log. #login_log_format = %$: %s ## ## Mailbox locations and namespaces ## # Location for users' mailboxes. This is the same as the old default_mail_env # setting. The default is empty, which means that Dovecot tries to find the # mailboxes automatically. This won't work if the user doesn't have any mail # yet, so you should explicitly tell Dovecot the full location. # # If you're using mbox, giving a path to the INBOX file (eg. /var/mail/%u) # isn't enough. You'll also need to tell Dovecot where the other mailboxes are # and where Dovecot can place its index files. This is called the "root mail # directory", and it must be the first path given in the mail_location setting. # # There are a few special variables you can use, eg.: # # %u - username # %n - user part in user@domain, same as %u if there's no domain # %d - domain part in user@domain, empty if there's no domain # %h - home directory # # See doc/variables.txt for full list. Some examples: # # mail_location = maildir:~/Maildir # mail_location = mbox:~/mail:INBOX=/var/mail/%u # mail_location = mbox:/var/mail/%d/%1n/%n:INDEX=/var/indexes/%d/%1n/%n # # http://wiki.dovecot.org/MailLocation # mail_location = mbox:~/mail:INBOX=/var/mail/%u:INDEX=/var/indexes/%u # If you need to set multiple mailbox locations or want to change default # namespace settings, you can do it by defining namespace sections: # # You can have private, shared and public namespaces. The only difference # between them is how Dovecot announces them to client via NAMESPACE # extension. Shared namespaces are meant for user-owned mailboxes which are # shared to other users, while public namespaces are for more globally # accessible mailboxes. # # REMEMBER: If you add any namespaces, the default namespace must be added # explicitly, ie. mail_location does nothing unless you have a namespace # without a location setting. Default namespace is simply done by having a # namespace with empty prefix. #namespace private { # Hierarchy separator to use. You should use the same separator for all # namespaces or some clients get confused. '/' is usually a good one. # The default however depends on the underlying mail storage format. #separator = # Prefix required to access this namespace. This needs to be different for # all namespaces. For example "Public/". #prefix = # Physical location of the mailbox. This is in same format as # mail_location, which is also the default for it. #location = # There can be only one INBOX, and this setting defines which namespace # has it. #inbox = yes # If namespace is hidden, it's not advertised to clients via NAMESPACE # extension or shown in LIST replies. This is mostly useful when converting # from another server with different namespaces which you want to depricate # but still keep working. For example you can create hidden namespaces with # prefixes "~/mail/", "~%u/mail/" and "mail/". #hidden = yes #} # Grant access to these extra groups for mail processes. Typical use would be # to give "mail" group write access to /var/mail to be able to create dotlocks. #mail_extra_groups = # Allow full filesystem access to clients. There's no access checks other than # what the operating system does for the active UID/GID. It works with both # maildir and mboxes, allowing you to prefix mailboxes names with eg. /path/ # or ~user/. #mail_full_filesystem_access = no ## ## Mail processes ## # Enable mail process debugging. This can help you figure out why Dovecot # isn't finding your mails. #mail_debug = no # Log prefix for mail processes. See doc/variables.txt for list of possible # variables you can use. #mail_log_prefix = "%Us(%u): " # Use mmap() instead of read() to read mail files. read() seems to be a bit # faster with my Linux/x86 and it's better with NFS, so that's the default. # Note that OpenBSD 3.3 and older don't work right with mail_read_mmaped = yes. #mail_read_mmaped = no # Don't use mmap() at all. This is required if you store indexes to shared # filesystems (NFS or clustered filesystem). #mmap_disable = no # Don't write() to mmaped files. This is required for some operating systems # which use separate caches for them, such as OpenBSD. #mmap_no_write = no # Locking method for index files. Alternatives are fcntl, flock and dotlock. # Dotlocking uses some tricks which may create more disk I/O than other locking # methods. NOTE: If you use NFS, remember to change also mmap_disable setting! #lock_method = fcntl # Drop all privileges before exec()ing the mail process. This is mostly # meant for debugging, otherwise you don't get core dumps. It could be a small # security risk if you use single UID for multiple users, as the users could # ptrace() each others processes then. #mail_drop_priv_before_exec = no # Show more verbose process titles (in ps). Currently shows user name and # IP address. Useful for seeing who are actually using the IMAP processes # (eg. shared mailboxes or if same uid is used for multiple accounts). #verbose_proctitle = no # Valid UID range for users, defaults to 500 and above. This is mostly # to make sure that users can't log in as daemons or other system users. # Note that denying root logins is hardcoded to dovecot binary and can't # be done even if first_valid_uid is set to 0. #first_valid_uid = 500 #last_valid_uid = 0 # Valid GID range for users, defaults to non-root/wheel. Users having # non-valid GID as primary group ID aren't allowed to log in. If user # belongs to supplementary groups with non-valid GIDs, those groups are # not set. #first_valid_gid = 1 #last_valid_gid = 0 # Maximum number of running mail processes. When this limit is reached, # new users aren't allowed to log in. #max_mail_processes = 1024 # Set max. process size in megabytes. Most of the memory goes to mmap()ing # files, so it shouldn't harm much even if this limit is set pretty high. #mail_process_size = 256 # Maximum allowed length for mail keyword name. It's only forced when trying # to create new keywords. #mail_max_keyword_length = 50 # Default umask to use for mail files and directories. #umask = 0077 # ':' separated list of directories under which chrooting is allowed for mail # processes (ie. /var/mail will allow chrooting to /var/mail/foo/bar too). # This setting doesn't affect login_chroot or auth_chroot variables. # WARNING: Never add directories here which local users can modify, that # may lead to root exploit. Usually this should be done only if you don't # allow shell access for users. See doc/configuration.txt for more information. #valid_chroot_dirs = # Default chroot directory for mail processes. This can be overridden for # specific users in user database by giving /./ in user's home directory # (eg. /home/./user chroots into /home). Note that usually there is no real # need to do chrooting, Dovecot doesn't allow users to access files outside # their mail directory anyway. #mail_chroot = ## ## Mailbox handling optimizations ## # Space-separated list of fields to initially save into cache file. Currently # these fields are allowed: # # flags, date.sent, date.received, size.virtual, size.physical # mime.parts, imap.body, imap.bodystructure # # Different IMAP clients work in different ways, so they benefit from # different cached fields. Some do not benefit from them at all. Caching more # than necessary generates useless disk I/O, so you don't want to do that # either. # # Dovecot attempts to automatically figure out what client wants and it keeps # only that. However the first few times a mailbox is opened, Dovecot hasn't # yet figured out what client needs, so it may not perform optimally. If you # know what fields the majority of your clients need, it may be useful to set # these fields by hand. If client doesn't actually use them, Dovecot will # eventually drop them. # # Usually you should just leave this field alone. The potential benefits are # typically unnoticeable. #mail_cache_fields = # Space-separated list of fields that Dovecot should never save to cache file. # Useful if you want to save disk space at the cost of more I/O when the fields # needed. #mail_never_cache_fields = # The minimum number of mails in a mailbox before updates are done to cache # file. This allows optimizing Dovecot's behavior to do less disk writes at # the cost of more disk reads. #mail_cache_min_mail_count = 0 # When IDLE command is running, mailbox is checked once in a while to see if # there are any new mails or other changes. This setting defines the minimum # time to wait between those checks. Dovecot is however able to use dnotify # and inotify with Linux to reply immediately after the change occurs. #mailbox_idle_check_interval = 30 # Save mails with CR+LF instead of plain LF. This makes sending those mails # take less CPU, especially with sendfile() syscall with Linux and FreeBSD. # But it also creates a bit more disk I/O which may just make it slower. # Also note that if other software reads the mboxes/maildirs, they may handle # the extra CRs wrong and cause problems. #mail_save_crlf = no ## ## Maildir-specific settings ## # By default LIST command returns all entries in maildir beginning with dot. # Enabling this option makes Dovecot return only entries which are directories. # This is done by stat()ing each entry, so it causes more disk I/O. # (For systems setting struct dirent->d_type, this check is free and it's # done always regardless of this setting) #maildir_stat_dirs = no # Copy mail to another folders using hard links. This is much faster than # actually copying the file. This is problematic only if something modifies # the mail in one folder but doesn't want it modified in the others. I don't # know any MUA which would modify mail files directly. IMAP protocol also # requires that the mails don't change, so it would be problematic in any case. # If you care about performance, enable it. #maildir_copy_with_hardlinks = no ## ## mbox-specific settings ## # Which locking methods to use for locking mbox. There are four available: # dotlock: Create <mailbox>.lock file. This is the oldest and most NFS-safe # solution. If you want to use /var/mail/ like directory, the users # will need write access to that directory. # fcntl : Use this if possible. Works with NFS too if lockd is used. # flock : May not exist in all systems. Doesn't work with NFS. # lockf : May not exist in all systems. Doesn't work with NFS. # # You can use multiple locking methods; if you do the order they're declared # in is important to avoid deadlocks if other MTAs/MUAs are using multiple # locking methods as well. Some operating systems don't allow using some of # them simultaneously. #mbox_read_locks = fcntl #mbox_write_locks = dotlock fcntl # Maximum time in seconds to wait for lock (all of them) before aborting. #mbox_lock_timeout = 300 # If dotlock exists but the mailbox isn't modified in any way, override the # lock file after this many seconds. #mbox_dotlock_change_timeout = 120 # When mbox changes unexpectedly we have to fully read it to find out what # changed. If the mbox is large this can take a long time. Since the change # is usually just a newly appended mail, it'd be faster to simply read the # new mails. If this setting is enabled, Dovecot does this but still safely # fallbacks to re-reading the whole mbox file whenever something in mbox isn't # how it's expected to be. The only real downside to this setting is that if # some other MUA changes message flags, Dovecot doesn't notice it immediately. # Note that a full sync is done with SELECT, EXAMINE, EXPUNGE and CHECK # commands. #mbox_dirty_syncs = yes # Like mbox_dirty_syncs, but don't do full syncs even with SELECT, EXAMINE, # EXPUNGE or CHECK commands. If this is set, mbox_dirty_syncs is ignored. #mbox_very_dirty_syncs = no # Delay writing mbox headers until doing a full write sync (EXPUNGE and CHECK # commands and when closing the mailbox). This is especially useful for POP3 # where clients often delete all mails. The downside is that our changes # aren't immediately visible to other MUAs. #mbox_lazy_writes = yes # If mbox size is smaller than this (in kilobytes), don't write index files. # If an index file already exists it's still read, just not updated. #mbox_min_index_size = 0 ## ## dbox-specific settings ## # Maximum dbox file size in kilobytes until it's rotated. #dbox_rotate_size = 2048 # Minimum dbox file size in kilobytes before it's rotated # (overrides dbox_rotate_days) #dbox_rotate_min_size = 16 # Maximum dbox file age in days until it's rotated. Day always begins from # midnight, so 1 = today, 2 = yesterday, etc. 0 = check disabled. #dbox_rotate_days = 0 ## ## IMAP specific settings ## protocol imap { # Login executable location. #login_executable = /usr/libexec/dovecot/imap-login # IMAP executable location. Changing this allows you to execute other # binaries before the imap process is executed. # # This would write rawlogs into ~/dovecot.rawlog/ directory: # mail_executable = /usr/libexec/dovecot/rawlog /usr/libexec/dovecot/imap # # This would attach gdb into the imap process and write backtraces into # /tmp/gdbhelper.* files: # mail_executable = /usr/libexec/dovecot/gdbhelper /usr/libexec/dovecot/imap # #mail_executable = /usr/libexec/dovecot/imap # Maximum IMAP command line length in bytes. Some clients generate very long # command lines with huge mailboxes, so you may need to raise this if you get # "Too long argument" or "IMAP command line too large" errors often. #imap_max_line_length = 65536 # Support for dynamically loadable plugins. mail_plugins is a space separated # list of plugins to load. #mail_plugins = #mail_plugin_dir = /usr/lib/dovecot/imap # Send IMAP capabilities in greeting message. This makes it unnecessary for # clients to request it with CAPABILITY command, so it saves one round-trip. # Many clients however don't understand it and ask the CAPABILITY anyway. #login_greeting_capability = no # Override the IMAP CAPABILITY response. #imap_capability = # Workarounds for various client bugs: # delay-newmail: # Send EXISTS/RECENT new mail notifications only when replying to NOOP # and CHECK commands. Some clients ignore them otherwise, for example # OSX Mail. Outlook Express breaks more badly though, without this it # may show user "Message no longer in server" errors. Note that OE6 still # breaks even with this workaround if synchronization is set to # "Headers Only". # outlook-idle: # Outlook and Outlook Express never abort IDLE command, so if no mail # arrives in half a hour, Dovecot closes the connection. This is still # fine, except Outlook doesn't connect back so you don't see if new mail # arrives. # netscape-eoh: # Netscape 4.x breaks if message headers don't end with the empty "end of # headers" line. Normally all messages have this, but setting this # workaround makes sure that Netscape never breaks by adding the line if # it doesn't exist. This is done only for FETCH BODY[HEADER.FIELDS..] # commands. Note that RFC says this shouldn't be done. # tb-extra-mailbox-sep: # With mbox storage a mailbox can contain either mails or submailboxes, # but not both. Thunderbird separates these two by forcing server to # accept '/' suffix in mailbox names in subscriptions list. # The list is space-separated. #imap_client_workarounds = outlook-idle } ## ## POP3 specific settings ## protocol pop3 { # Login executable location. #login_executable = /usr/libexec/dovecot/pop3-login # POP3 executable location. See IMAP's mail_executable above for examples # how this could be changed. #mail_executable = /usr/libexec/dovecot/pop3 # Don't try to set mails non-recent or seen with POP3 sessions. This is # mostly intended to reduce disk I/O. With maildir it doesn't move files # from new/ to cur/, with mbox it doesn't write Status-header. #pop3_no_flag_updates = no # Support LAST command which exists in old POP3 specs, but has been removed # from new ones. Some clients still wish to use this though. Enabling this # makes RSET command clear all \Seen flags from messages. #pop3_enable_last = no # If mail has X-UIDL header, use it as the mail's UIDL. #pop3_reuse_xuidl = no # Keep the mailbox locked for the entire POP3 session. #pop3_lock_session = no # POP3 UIDL format to use. You can use following variables: # # %v - Mailbox UIDVALIDITY # %u - Mail UID # %m - MD5 sum of the mailbox headers in hex (mbox only) # %f - filename (maildir only) # # If you want UIDL compatibility with other POP3 servers, use: # UW's ipop3d : %08Xv%08Xu # Courier version 0 : %f # Courier version 1 : %u # Courier version 2 : %v-%u # Cyrus (<= 2.1.3) : %u # Cyrus (>= 2.1.4) : %v.%u # Older Dovecots : %v.%u # tpop3d : %Mf # # Note that Outlook 2003 seems to have problems with %v.%u format which was # Dovecot's default, so if you're building a new server it would be a good # idea to change this. %08Xu%08Xv should be pretty fail-safe. # # NOTE: Nowadays this is required to be set explicitly, since the old # default was bad but it couldn't be changed without breaking existing # installations. %08Xu%08Xv will be the new default, so use it for new # installations. # #pop3_uidl_format = # POP3 logout format string: # %t - number of TOP commands # %p - number of bytes sent to client as a result of TOP command # %r - number of RETR commands # %b - number of bytes sent to client as a result of RETR command # %d - number of deleted messages # %m - number of messages (before deletion) # %s - mailbox size in bytes (before deletion) #pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s # Support for dynamically loadable plugins. mail_plugins is a space separated # list of plugins to load. #mail_plugins = #mail_plugin_dir = /usr/lib/dovecot/pop3 # Workarounds for various client bugs: # outlook-no-nuls: # Outlook and Outlook Express hang if mails contain NUL characters. # This setting replaces them with 0x80 character. # oe-ns-eoh: # Outlook Express and Netscape Mail breaks if end of headers-line is # missing. This option simply sends it if it's missing. # The list is space-separated. #pop3_client_workarounds = } ## ## LDA specific settings ## protocol lda { # Address to use when sending rejection mails. postmaster_address = postmaster(a)example.com # Hostname to use in various parts of sent mails, eg. in Message-Id. # Default is the system's real hostname. #hostname = # Support for dynamically loadable plugins. mail_plugins is a space separated # list of plugins to load. #mail_plugins = #mail_plugin_dir = /usr/lib/dovecot/lda # Binary to use for sending mails. #sendmail_path = /usr/lib/sendmail # UNIX socket path to master authentication server to find users. #auth_socket_path = /var/run/dovecot/auth-master } ## ## Authentication processes ## # Executable location #auth_executable = /usr/libexec/dovecot/dovecot-auth # Set max. process size in megabytes. #auth_process_size = 256 # Authentication cache size in kilobytes. 0 means it's disabled. # Note that bsdauth, PAM and vpopmail require cache_key to be set for caching # to be used. Also note that currently auth cache doesn't work very well if # you're using multiple passdbs with same usernames in them. #auth_cache_size = 0 # Time to live in seconds for cached data. After this many seconds the cached # record is no longer used, *except* if the main database lookup returns # internal failure. We also try to handle password changes automatically: If # user's previous authentication was successful, but this one wasn't, the # cache isn't used. For now this works only with plaintext authentication. #auth_cache_ttl = 3600 # Space separated list of realms for SASL authentication mechanisms that need # them. You can leave it empty if you don't want to support multiple realms. # Many clients simply use the first one listed here, so keep the default realm # first. #auth_realms = # Default realm/domain to use if none was specified. This is used for both # SASL realms and appending @domain to username in plaintext logins. #auth_default_realm = # List of allowed characters in username. If the user-given username contains # a character not listed in here, the login automatically fails. This is just # an extra check to make sure user can't exploit any potential quote escaping # vulnerabilities with SQL/LDAP databases. If you want to allow all characters, # set this value to empty. #auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@ # Username character translations before it's looked up from databases. The # value contains series of from -> to characters. For example "#@/@" means # that '#' and '/' characters are translated to '@'. #auth_username_translation = # Username formatting before it's looked up from databases. You can use # the standard variables here, eg. %Lu would lowercase the username, %n would # drop away the domain if it was given, or "%n-AT-%d" would change the '@' into # "-AT-". This translation is done after auth_username_translation changes. #auth_username_format = # If you want to allow master users to log in by specifying the master # username within the normal username string (ie. not using SASL mechanism's # support for it), you can specify the separator character here. The format # is then <username><separator><master username>. UW-IMAP uses "*" as the # separator, so that could be a good choice. #auth_master_user_separator = # Username to use for users logging in with ANONYMOUS SASL mechanism #auth_anonymous_username = anonymous # More verbose logging. Useful for figuring out why authentication isn't # working. #auth_verbose = no # Even more verbose logging for debugging purposes. Shows for example SQL # queries. #auth_debug = no # In case of password mismatches, log the passwords and used scheme so the # problem can be debugged. Requires auth_debug=yes to be set. #auth_debug_passwords = no # Maximum number of dovecot-auth worker processes. They're used to execute # blocking passdb and userdb queries (eg. MySQL and PAM). They're # automatically created and destroyed as needed. #auth_worker_max_count = 30 # Kerberos keytab to use for the GSSAPI mechanism. Will use the system # default (usually /etc/krb5.keytab) if not specified. #auth_krb5_keytab = auth default { # Space separated list of wanted authentication mechanisms: # plain login digest-md5 cram-md5 ntlm rpa apop anonymous gssapi mechanisms = plain # # Password database is used to verify user's password (and nothing more). # You can have multiple passdbs and userdbs. This is useful if you want to # allow both system users (/etc/passwd) and virtual users to login without # duplicating the system users into virtual database. # # http://wiki.dovecot.org/PasswordDatabase # # By adding master=yes setting inside a passdb you make the passdb a list # of "master users", who can log in as anyone else. Unless you're using PAM, # you probably still want the destination user to be looked up from passdb # that it really exists. This can be done by adding pass=yes setting to the # master passdb. # # http://wiki.dovecot.org/MasterPassword # Users can be temporarily disabled by adding a passdb with deny=yes. # If the user is found from that database, authentication will fail. # The deny passdb should always be specified before others, so it gets # checked first. Here's an example: #passdb passwd-file { # File contains a list of usernames, one per line #args = /etc/dovecot.deny #deny = yes #} # PAM authentication. Preferred nowadays by most systems. # Note that PAM can only be used to verify if user's password is correct, # so it can't be used as userdb. If you don't want to use a separate user # database (passwd usually), you can use static userdb. # REMEMBER: You'll need /etc/pam.d/dovecot file created for PAM # authentication to actually work. # http://wiki.dovecot.org/PasswordDatabase/PAM passdb pam { # [session=yes] [setcred=yes] [cache_key=<key>] [<service name>] # # session=yes makes Dovecot open and immediately close PAM session. Some # PAM plugins need this to work, such as pam_mkhomedir. # # setcred=yes makes Dovecot establish PAM credentials if some PAM plugins # need that. They aren't ever deleted though, so this isn't enabled by # default. # # cache_key can be used to enable authentication caching for PAM # (auth_cache_size also needs to be set). It isn't enabled by default # because PAM modules can do all kinds of checks besides checking password, # such as checking IP address. Dovecot can't know about these checks # without some help. cache_key is simply a list of variables (see # doc/variables.txt) which must match for the cached data to be used. # Here are some examples: # %u - Username must match. Probably sufficient for most uses. # %u%r - Username and remote IP address must match. # %u%s - Username and service (ie. IMAP, POP3) must match. # # If service name is "*", it means the authenticating service name # is used, eg. pop3 or imap (/etc/pam.d/pop3, /etc/pam.d/imap). # # Some examples: # args = session=yes * # args = cache_key=%u dovecot #args = dovecot } # /etc/passwd or similar, using getpwnam() # In many systems nowadays this uses Name Service Switch, which is # configured in /etc/nsswitch.conf. # http://wiki.dovecot.org/AuthDatabase/Passwd #passdb passwd { #} # /etc/shadow or similiar, using getspnam(). Deprecated by PAM nowadays. # http://wiki.dovecot.org/PasswordDatabase/Shadow #passdb shadow { #} # PAM-like authentication for OpenBSD. # http://wiki.dovecot.org/PasswordDatabase/BSDAuth #passdb bsdauth { # [cache_key=<key>] - See cache_key in PAM for explanation. #args = #} # passwd-like file with specified location # http://wiki.dovecot.org/AuthDatabase/PasswdFile #passdb passwd-file { # Path for passwd-file #args = #} # checkpassword executable authentication # NOTE: You will probably want to use "userdb prefetch" with this. # http://wiki.dovecot.org/PasswordDatabase/CheckPassword #passdb checkpassword { # Path for checkpassword binary #args = #} # SQL database # http://wiki.dovecot.org/AuthDatabase/SQL #passdb sql { # Path for SQL configuration file, see doc/dovecot-sql.conf for example #args = #} # LDAP database # http://wiki.dovecot.org/AuthDatabase/LDAP #passdb ldap { # Path for LDAP configuration file, see doc/dovecot-ldap.conf for example #args = #} # vpopmail authentication # http://wiki.dovecot.org/AuthDatabase/VPopMail #passdb vpopmail { # [cache_key=<key>] - See cache_key in PAM for explanation. #args = #} # # User database specifies where mails are located and what user/group IDs # own them. For single-UID configuration use "static". # # http://wiki.dovecot.org/UserDatabase # # /etc/passwd or similar, using getpwnam() # In many systems nowadays this uses Name Service Switch, which is # configured in /etc/nsswitch.conf. WARNING: nss_ldap is known to be broken # with Dovecot. Don't use it, or users might log in as each others! # http://wiki.dovecot.org/AuthDatabase/Passwd userdb passwd { } # passwd-like file with specified location # http://wiki.dovecot.org/AuthDatabase/PasswdFile #userdb passwd-file { # Path for passwd-file #args = #} # static settings generated from template # http://wiki.dovecot.org/UserDatabase/Static #userdb static { # Template for the fields. Can return anything a userdb could normally # return. For example: # # args = uid=500 gid=500 home=/var/mail/%u # #args = #} # SQL database # http://wiki.dovecot.org/AuthDatabase/SQL #userdb sql { # Path for SQL configuration file, see doc/dovecot-sql.conf for example #args = #} # LDAP database # http://wiki.dovecot.org/AuthDatabase/LDAP #userdb ldap { # Path for LDAP configuration file, see doc/dovecot-ldap.conf for example #args = #} # vpopmail # http://wiki.dovecot.org/AuthDatabase/VPopMail #userdb vpopmail { #} # "prefetch" user database means that the passdb already provided the # needed information and there's no need to do a separate userdb lookup. # This can be made to work with SQL and LDAP databases, see their example # configuration files for more information how to do it. # http://wiki.dovecot.org/UserDatabase/Prefetch #userdb prefetch { #} # User to use for the process. This user needs access to only user and # password databases, nothing else. Only shadow and pam authentication # requires roots, so use something else if possible. Note that passwd # authentication with BSDs internally accesses shadow files, which also # requires roots. Note that this user is NOT used to access mails. # That user is specified by userdb above. user = root # Directory where to chroot the process. Most authentication backends don't # work if this is set, and there's no point chrooting if auth_user is root. # Note that valid_chroot_dirs isn't needed to use this setting. #chroot = # Number of authentication processes to create #count = 1 # Require a valid SSL client certificate or the authentication fails. #ssl_require_client_cert = no # Take the username from client's SSL certificate, using # X509_NAME_get_text_by_NID() which returns the subject's DN's # CommonName. #ssl_username_from_cert = no # It's possible to export the authentication interface to other programs: #socket listen { #master { # Master socket is typically used to give Dovecot's local delivery # agent access to userdb so it can find mailbox locations. It can # however also be used to disturb regular user authentications. # WARNING: Giving untrusted users access to master socket may be a # security risk, don't give too wide permissions to it! #path = /var/run/dovecot/auth-master #mode = 0600 # Default user/group is the one who started dovecot-auth (root) #user = #group = #} #client { # The client socket is generally safe to export to everyone. Typical use # is to export it to your SMTP server so it can do SMTP AUTH lookups # using it. #path = /var/run/dovecot/auth-client #mode = 0660 #} #} } # If you wish to use another authentication server than dovecot-auth, you can # use connect sockets. They assumed to be already running, Dovecot's master # process only tries to connect to them. They don't need any other settings # than the path for the master socket, as the configuration is done elsewhere. # Note that the client sockets must exist in the login_dir. #auth external { # socket connect { # master { # path = /var/run/dovecot/auth-master # } # } #} ## ## Dictionary server settings ## # Dictionary can be used by some plugins to store key=value lists. # Currently this is only used by dict quota backend. The dictionary can be # used either directly or though a dictionary server. The following dict block # maps dictionary names to URIs when the server is used. These can then be # referenced using URIs in format "proxy:<name>". dict { #quota = mysql:/etc/dovecot-dict-quota.conf } ## ## Plugin settings ## plugin { # Here you can give some extra environment variables to mail processes. # This is mostly meant for passing parameters to plugins. %variable # expansion is done for all values. # Quota plugin. Multiple backends are supported: # dirsize: Find and sum all the files found from mail directory # dict: Keep quota stored in dictionary (eg. SQL) # maildir: Maildir++ quota # fs: Read-only support for filesystem quota #quota = maildir # ACL plugin. vfile backend reads ACLs from "dovecot-acl" file from maildir # directory. You can also optionally give a global ACL directory path where # ACLs are applied to all users' mailboxes. The global ACL directory contains # one file for each mailbox, eg. INBOX or sub.mailbox. #acl = vfile:/etc/dovecot-acls # Convert plugin. If set, specifies the source storage path which is # converted to destination storage (mail_location). #convert_mail = mbox:%h/mail # Trash plugin. When saving a message would make user go over quota, this # plugin automatically deletes the oldest mails from configured mailboxes # until the message can be saved within quota limits. The configuration file # is a text file where each line is in format: <priority> <mailbox name> # Mails are first deleted in lowest -> highest priority number order #trash = /etc/dovecot-trash.conf }

1 0

[Dovecot] Which version of dovecat I must use quit mysql 14.12 5.0.24a?
by maria.freixes_graells＠alcatel.es 22 Nov '06

22 Nov '06

Hello everybody!! I'm new on linux machine configuration, and I have a question related to product versions. We've Linux seweb1 2.6.9-5.EL installed, but instead of install the mysql product from "Red Hat Interprise Linux 4" CD what is mysql-0:4.1.7-4.RHEL4.1.i386, we installed: *mysql 14.12 5.0.24a *So, now, when we tried to install dovecot, it needs mysql-0:4.1.7-4.RHEL4.1.i386, perl-DBD-MySQL-0:2.9004-3.1.i386 and postgresql-libs-0:74.6-1.RHEL4.2.i386. I don't want to install these packets from mysql because I'm afraid to crash the mysql that we've now working...... So, my question is, what I need to do in this case? Can I install the mysql CD version without interferring to our actual BD working: *mysql 14.12 5.0.24a? *Or....Which version of dovecot we must install in order to work with *mysql 14.12 5.0.24a. *I would be very gratefully if you could help me, beacause we afraid to crash the BD that is working now, and we don't know how to install dovecot in this case. Best regards, Maria

2 1

[Dovecot] assertion failed: (need_space == (uoff_t)-mails[idx].space)
by David King 21 Nov '06

21 Nov '06

I'm running Dovecot dovecot-1.0.r13 on FreeBSD (FreeBSD 6.1-RELEASE- p10). Mail is stored in mbox format (dovecot.conf after the msg). Procmail delivers mail to subfolders under ~/.mail, locking using dotfiles. One folder in particular for one user has an mbox file ~/.mail/Cron. Quite often, I'll see that procmail processes are stacking up because ~/.mail/Cron.lock exists, and they (rightly) refuse to deliver to a locked mailbox. It seems that dovecot is creating these lock files and then dying. The .lock file's contents refer to a PID that, by the time I see the lockfile, doesn't exist. It appears that dovecot is leaving behind the lock files, after exiting with a signal 6 (sometimes 11) and leaving behind messages in /var/log/maillog (and the end of this message). In dovecot.conf I have mail_drop_priv_before_exec = no, but I can't find the core file that I would expect it to dump, so I can't give you a backtrace. Hopefully the assertion in /var/log/maillog is enough. With ~/.mail/Cron perpetually locked, I'm not able to receive mail in this folder, and with any IMAP client that tries to access that folder having the IMAP server shut down, it keeps me from getting mail. Any ideas? # tail /var/log/maillog Nov 11 23:05:32 melchoir dovecot: imap-login: Login: user=<ketralnis>, method=PLAIN, rip=10.0.1.239, lip=10.0.0.1, TLS Nov 11 23:05:32 melchoir dovecot: IMAP(ketralnis): Disconnected: Logged out Nov 11 23:06:52 melchoir dovecot: IMAP(ketralnis): file mbox-sync- rewrite.c: line 405 (mbox_sync_read_and_move): assertion failed: (need_space == (uoff_t)-mails[idx].space) Nov 11 23:06:52 melchoir dovecot: child 16929 (imap) killed with signal 6 Here is dovecot.conf: # cat /usr/local/etc/dovecot.conf | sed -E 's/^(.*)#.*$/\1/' | grep - Ev '(^#|^[ ]*$' protocols = imap pop3 imaps pop3s ssl_cert_file = /etc/ssl/mail-cert.pem ssl_key_file = /etc/ssl/private/mail-key.pem disable_plaintext_auth = no login_user = dovecot verbose_proctitle = yes first_valid_gid = 0 mail_extra_groups = mail default_mail_env = mbox:%h/.mail:INBOX=/var/mail/%u mmap_disable = no lock_method = fcntl mbox_read_locks = dotlock mbox_write_locks = dotlock fcntl mail_drop_priv_before_exec = no protocol imap { login_greeting_capability = yes imap_client_workarounds = delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep } protocol pop3 { pop3_uidl_format = %08Xu%08Xv pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } auth default { mechanisms = plain login passdb pam { } userdb passwd { } userdb prefetch { } user = root }

2 3

[Dovecot] Dovecot on Solaris
by Steven F Siirila 21 Nov '06

21 Nov '06

For those running Dovecot on Solaris, what are your positive/negative experiences with building the software with CC vs. GCC? We are currently letting ./configure find our gcc and build with it, but wondered if anyone has any experience with Sun CC (does it even compile, for example). -- Steven F. Siirila Office: Lind Hall, Room 130B Internet Services E-mail: sfs(a)umn.edu Office of Information Technology Voice: (612) 626-0244 University of Minnesota Fax: (612) 626-7593

6 5

[Dovecot] RAID benchmarks
by Ethan Sommer 21 Nov '06

21 Nov '06

We (a small college with about 3000 active accounts) are currently in the process of moving from UW IMAP running on linux to dovecot running on a cluster of 3 or 4 new faster Linux machines. (Initially using perdition to split the load.) As we are building and designing the system, I'm attempting to take (or find) benchmarks everywhere I can in order to make informed decisions and so that when we need something faster we have something to compare it to. I've looked all over the Internet and I haven't seen very many good benchmarks running on recent hardware for things like this. Even simple things like how different raid levels perform with fast CPUs and really fast disks. We recently got the first of the cluster machines (which has the following specs: (from penguin computing) 2x 1.6ghz woodcrest (so 4 cores total) 2g ram (we may upgrade to more, depending on what we seem to need) 6x 15k SAS 73G hard drives. I've always read that RAID 10 is the RAID of choice for mail, because the checksums take time and whatnot, but on a system that fast I'm sure that's not an issue (which I could see from the cpu usage during benchmarks.) We were also wondering whether RAID6 would be a good option since it would give more redundancy. (raid6 allows 2 drive failures) All tests were run on ext3 with all 6 disks in the raid. Everything is using Linux software raid. I used bonnie++ to run the benchmarks, and here are the initial results we got: Output Input RAID "Per Chr" "Block" "Per Chr" "Block" RAID6 34628, 97983, 23316, 39077 RAID5 39559, 32715, 32036, 52231 RAID10 38816, 229062, 40645, 267418 I assume that mail running maildir (as we intend to do) is somewhere between writing one char at a time and writing huge blocks to fill 4g files. Since the Per Chr values seemed to have maxed out the CPU and we'll have 4 cores available, I tried the same thing running 4 copies of bonnie at once and adding the results. (I worked backwards and didn't bother with raid 6 for obvious reasons) Output Input RAID "Per Chr" "Block" "Per Chr" "Block" RAID5 37465, 37095, 102828, 174263 RAID10 111239, 128287, 93400, 230320 So, if our system is ever running full out, basically disk bound, it should be able to handle about 4X as many writes and at least as many reads using RAID10 than raid 5, and since raid 6 was pretty similar to raid 5 in the first tests, I assume it will be here too. I have the full bonnie results if anyone's interested. I also plan to come up with some basic benchmarks as we start to actually have dovecot working as we want it to. (Possibly using the macs in our labs and XGrid as a "client".. finally a use for that thing :) ) Do people have suggestions as to what to test for a primarily IMAP (+ a little POP) server? I was thinking of doing something similar to http://www.courier-mta.org/mbox-vs-maildir/ which selects a mail box, deletes and expunges a message, fetches a few messages, and then does some searches. Also, while I have the opportunity, are there any other benchmarks I should run? I suppose I could compare dovecot with mbox vs maildir, with indexing and without. Dovecot with indexing but the indexes deleted, etc. I could compare dovecot to uw imap. Anything else? I probably can't justify the time to get cyrus up and running. (I did that a few months ago when deciding which server to use...) Ethan Sommer -- -- Ethan Sommer Systems Administrator Gustavus Adolphus College 507-933-7042 sommere(a)gac.edu

3 5

[Dovecot] rc14 and rc15 performance issues
by Jeff A. Earickson 21 Nov '06

21 Nov '06

Hi, I am stuck at rc13 because rc14 and rc15 have both failed to keep up with imap connections on my (slow old) system. I have the problem where if a lot of people check their email at once (like at the top of the hour) then my load goes way up and things slow to a crawl. My setup: Solaris 10 on an E220R, mbox format, imap and imaps only. I also use "login_process_per_connection = no". Any suggestions? Jeff Earickson Colby College

5 6

[Dovecot] how to configure dovecot
by Hein Celliers 21 Nov '06

21 Nov '06

Hi all! I need some help....changing passwords....... Dovecot server, appears to cache the old credentials. It only discovers the change upon a restart. I need to know how to configure dovecot (dovecot-1.0-0.beta2.7) as not to cache the passwords. (Using fedora core 5) Thanks Hein Celliers

1 0

Re: [Dovecot] Dovecot on Solaris
by Joseph Tam 21 Nov '06

21 Nov '06

> For those running Dovecot on Solaris, what are your positive/negative > experiences with building the software with CC vs. GCC? We are currently > letting ./configure find our gcc and build with it, but wondered if anyone > has any experience with Sun CC (does it even compile, for example). I once used StudioCC to compile dovecot to see if the problem I had was a compiler bug, but in general, I use gcc since a lot of software is tested against it. I don't use Studio unless performance is critical. >From what I know, IMAP performance is basically disk-memory bounded, so it might not be worth sweating over: use whatever gives you the least grief. Joseph Tam <tam(a)math.ubc.ca>

1 0

[Dovecot] manageSIEVE implementation
by Brian G. Peterson 20 Nov '06

20 Nov '06

I found a thread from last year that suggested that a manageSIEVE (port 2000) implementation for dovecot-sieve doesn't exist yet. I assume that this is still true. Could somebody please provide a status on this? Thanks, - Brian

3 3

Re: [Dovecot] Auth checking also the service
by Andrey Panin 20 Nov '06

20 Nov '06

On 322, 11 18, 2006 at 12:56:41 +0100, Alessandro Astarita wrote: > Alle 12:14, sabato 18 novembre 2006, Johannes Berg ha scritto: > > I don't see why it wouldn't be possible but haven't looked at the code. > > > > I wonder why you even need to distinguish between these though. Are we > > still in the days where encryption is a value-added service? :) > > I have to distinguish pop3/pop3s and imap/imaps because I need mailboxes with > ssl access only. It's a way to force users to do secure connection. :-) Please try attached patch. It adds %c variable which expands to "TLS" if connection is secure. > -- > Alessandro 'Asterix' Astarita <aleast(a)capri.it> > Capri Online S.r.l. http://www.caprionline.it/ > "Unix IS user friendly. It's just selective about who its friend are" > -- Andrey Panin | Linux and UNIX system administrator pazke(a)donpac.ru | PGP key: wwwkeys.pgp.net

3 2

[Dovecot] BUG: passdb checkpassword {} and lastauth file
by Max A 20 Nov '06

20 Nov '06

(Repeat, because on the first message there was no reaction) Hi. If checkpassword interface is used for working with vpopmail, function vpopmail "Record time and ip of last auth attempt" (--enable-auth-logging option for configure) won't work - the file "lastauth" is created in Maildir, but does not contain ip-address. If I had correctly understood, dovecot woldn't have set a enviroment variable TCPREMOTEIP for vchkpw. If changes are made in auth/passdb-checkpassword.c (a patch in attachment), everything will work. Probably, the patch is incorrect and does not solve all problems, however the request is to pay attention to existence of the problem. Also it is possible, that a similar problem exists with other variables TCP UCSPI protocol (http://cr.yp.to/proto/ucspi-tcp.txt) P.S. If use the interface vpopmail instead of checkpassword, the file "lastauth" will not be created at all, that is a little bit inconvenient. ********************************** System: dovecot-1.0.rc10 vpopmail-5.4.17 ASP Linux Server II (RHEL3 clone) kernel 2.4.21-47.EL.aspsmp CPU architecture: x86 (IBM xSeries 336) Filesystem: ext3 ********************************** dovecot configuration: base_dir = /var/run/dovecot/ protocols = imap pop3 disable_plaintext_auth = no ssl_disable = yes login_greeting = Ready. first_valid_uid = 89 last_valid_uid = 89 first_valid_gid = 89 last_valid_gid = 89 protocol imap { listen = 81.26.136.8:144 mail_executable = /usr/local/libexec/dovecot/imap mail_plugins = quota imap_quota mail_plugin_dir = /usr/local/lib/dovecot/imap imap_client_workarounds = delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep } protocol pop3 { listen = 81.26.136.8:112 login_executable = /usr/local/libexec/dovecot/pop3-login mail_executable = /usr/local/libexec/dovecot/pop3 pop3_uidl_format = %f mail_plugins = quota mail_plugin_dir = /usr/local/lib/dovecot/pop3 pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } auth default { mechanisms = plain login passdb checkpassword { args = /var/qmail/vpopmail/bin/vchkpw } userdb prefetch { } user = root } dict { } plugin { quota = maildir } *************************************** dovecot configure options: ./configure \ --disable-ipv6 \ --prefix=/usr/local \ --sysconfdir=/etc/dovecot \ --without-passwd \ --without-passwd-file \ --without-shadow \ --without-pam \ --without-bsdauth \ --with-checkpassword \ --with-vpopmail \ --without-static-userdb \ --with-prefetch-userdb \ --without-sql \ --without-pgsql \ --without-mysql \ --without-sqlite \ --with-ssl=openssl \ --with-pop3d \ --without-deliver \ --with-storages=maildir \ --with-docs ***************************************** vpopmail configure options: ./configure \ --enable-auth-module=cdb \ --enable-logging=p \ --enable-md5-passwords \ --enable-make-seekable \ --enable-file-sync \ --enable-ip-alias-domains \ --enable-clear-passwd \ --disable-roaming-users \ --disable-learn-passwords \ --disable-passwd \ --enable-auth-logging diff -ur dovecot-1.0.rc10.orig/src/auth/passdb-checkpassword.c dovecot-1.0.rc10/src/auth/passdb-checkpassword.c --- dovecot-1.0.rc10.orig/src/auth/passdb-checkpassword.c 2006-08-22 06:37:56.000000000 +0400 +++ dovecot-1.0.rc10/src/auth/passdb-checkpassword.c 2006-10-17 16:47:09.000000000 +0400 @@ -226,6 +226,10 @@ env_put(t_strconcat("REMOTE_IP=", net_ip2addr(&request->remote_ip), NULL)); + env_put(t_strconcat("TCPREMOTEIP=", + net_ip2addr(&request->remote_ip), + NULL)); + } if (request->master_user != NULL) { env_put(t_strconcat("MASTER_USER=",

2 5

[Dovecot] dovecot and ldap passwords.
by Mauro Sanna 20 Nov '06

20 Nov '06

Hallo. First of all I'm sorry for my bad english. I have a question about how dovecot use passwords. I have all my mail accounts in a ldap database. The user password are stored in form: {crypt}mypasswd. In dovecot-ldap.conf I have default_pass_scheme = CRYPT. All is working fine. The problem in the crypt scheme is that I can't have passwords more than 8 characters long. So I've tried to change the type of the ldap passwords in SSHA or SMD5, but in this way the users can't authenticate yourselfs. Dovecot doesn't understand SSHA or SMD5?

3 3

[Dovecot] Problem with rc10
by Steven F Siirila 20 Nov '06

20 Nov '06

I just upgraded our test server from rc6 to rc10... ISSUE #1 I noticed that we no longer are getting two "From_" lines. However, the one that was good (had the original sender e-mail address) is now gone. The one with "dovecot.deliver" remains. I attempted to add "-d test" to the mailbox_command line in main.cf as follows: mailbox_command = /opt/dovecot/libexec/dovecot/deliver -d test and things turned ugly and caused Postfix to defer messages: Oct 17 16:31:50 hostname postfix/local[7230]: D14632C9C: to=<someuser@somehost>, relay=local, delay=3.6, delays=3/0.02/0/0.62, dsn=4.3.0, status=deferred (temporary failure) I removed the "-d test" from the Postfix main.cf and the problem went away. So, how do I fix the "From_" lines? ISSUE #2 After upgrading, messages cannot be moved from the INBOX to a folder. Thunderbird claims there was an internal error and to consule the server logs, but I see nothing in the dovecot logs that would indicate what's going on. For example, I attempted to move a message into my Trash folder which did not currently have any index files. Here is a Solaris truss output of that attempt: poll(0x000B4C98, 2, 999) = 0 poll(0x000B4C98, 2, 0) = 0 poll(0x000B4C98, 2, 999) = 1 read(0, " D O N E\r\n", 3323) = 6 write(1, " 2 8 O K I d l e c".., 23) = 23 read(0, 0x000BC5BB, 3317) Err#11 EAGAIN poll(0x000B4C98, 2, 675) = 1 read(0, " 3 0 u i d c o p y ".., 3317) = 27 stat64("/home/sfs/Trash", 0xFFBFF5C8) = 0 alarm(120) = 0 fcntl(6, F_SETLKW64, 0xFFBFF308) = 0 alarm(0) = 120 stat64("/home/sfs/Trash", 0xFFBFF640) = 0 mkdir("/home/sfs/.imap/Trash", 0770) Err#17 EEXIST stat64("/home/sfs/.imap/Trash", 0xFFBFF4C0) = 0 stat64("/home/sfs/Trash", 0xFFBFF4C0) = 0 time() = 1161122396 open64("/home/sfs/.imap/Trash/dovecot.index", O_RDWR) Err#2 ENOENT open64("/home/sfs/.imap/Trash/dovecot.index", O_RDWR) Err#2 ENOENT write(1, " 3 0 N O I n t e r n".., 96) = 96 poll(0x000B4C98, 2, 588) = 0 poll(0x000B4C98, 2, 0) = 0 poll(0x000B4C98, 2, 410) = 0 Someone else using a different IMAP client caused these errors to occur (this is even after I wiped all of their dovecot index files): Oct 17 16:43:11 earth.tc.umn.edu dovecot: IMAP(kor): Corrupted transaction log file /home/kor/.imap/INBOX/dovecot.index.log: invalid indexid (1161121145 != 1156185395) Oct 17 16:43:11 earth.tc.umn.edu dovecot: IMAP(kor): Corrupted transaction log file /home/kor/.imap/INBOX/dovecot.index.log: invalid new transaction log sequence (6 >= 6) Oct 17 16:47:09 earth.tc.umn.edu dovecot: IMAP(kor): Corrupted transaction log file /home/kor/.imap/INBOX/dovecot.index.log: invalid indexid (1161121145 != 1161120959) Oct 17 16:47:09 earth.tc.umn.edu dovecot: IMAP(kor): Corrupted transaction log file /home/kor/.imap/INBOX/dovecot.index.log: invalid new transaction log sequence (2 >= 2) Oct 17 17:05:59 earth.tc.umn.edu dovecot: IMAP(kor): Corrupted transaction log file /home/kor/.imap/INBOX/dovecot.index.log: invalid indexid (1161121145 != 1161120959) Oct 17 17:05:59 earth.tc.umn.edu dovecot: IMAP(kor): Corrupted transaction log file /home/kor/.imap/INBOX/dovecot.index.log: invalid new transaction log sequence (4 >= 4) Here are our non-standard dovecot.conf items: protocols = imap imaps pop3 pop3s shutdown_clients = no syslog_facility = local6 ssl_cert_file = /etc/opt/openssl/certs/dovecot.pem ssl_key_file = /etc/opt/openssl/private/dovecot.pem default_mail_env = mbox:~/:INBOX=/var/mail/%u # Default namespace namespace private { separator = / prefix = location = mbox:~/:INBOX=/var/mail/%u inbox = yes hidden = yes } mail_full_filesystem_access = yes first_valid_uid = 100 max_mail_processes = 8192 mbox_min_index_size = 128 imap_client_workarounds = delay-newmail outlook-idle tb-extra-mailbox-sep pop3_uidl_format = %08Xu%08Xv protocol lda { postmaster_address = postmaster(a)umn.edu mail_plugins = cmusieve } auth_verbose = yes auth_debug = yes auth default { passdb pam { args = session=yes * } } I am now backing out to rc6 for now... we never saw this behavior on rc6. -- Steven F. Siirila Office: Lind Hall, Room 130B Internet Services E-mail: sfs(a)umn.edu Office of Information Technology Voice: (612) 626-0244 University of Minnesota Fax: (612) 626-7593

2 4

[Dovecot] Problems Creating Core Dumps
by Joseph D. Wagner 20 Nov '06

20 Nov '06

Dovecot 1.0.rc15 crashed on my FC4 server, but it didn't create a core dump. Upon further research, I found these lines tucked away in the /etc/rc.d/init.d/functions file: # make sure it doesn't core dump anywhere unless requested ulimit -S -c ${DAEMON_COREFILE_LIMIT:-0} >/dev/null 2>&1 The /etc/rc.d/init.d/functions file is a master file that is referenced by all of the init scripts, so I didn't want to change it. Instead, I created a file /etc/sysconfig/dovecot with the following line: DAEMON_COREFILE_LIMIT=unlimited If I'm reading the /etc/rc.d/init.d/functions file correctly, this should work, but my bash is rusty. I was hoping someone else could check my work. Joseph D. Wagner

2 1

[Dovecot] Backtraces without core dumps
by Timo Sirainen 19 Nov '06

19 Nov '06

Since getting core dumps seems to be difficult sometimes, especially with login processes, I've now added code to log the backtrace when Dovecot crashes in some assert check (or some other reason why it decides to abort()). This code works with Linux and Solaris, but I don't know about BSDs. Apparently there exists libexecinfo library which could be used. I think this code could be used to log backtraces also for segfaults, but that's more risky so I didn't do it yet. Maybe it should be done only optionally. If you're interested in trying, the code is now in CVS and in the latest nightly snapshot. When it crashes, it prints something like: Panic: file client.c: line 55 (client_create): assertion failed: (my_client != NULL) Error: Backtrace: ./imap [0x80b2ffa] -> ./imap [0x80b2ecc] -> ./imap [0x805bbb3] -> ./imap(main+0x426) [0x80634a6] -> /lib/tls/libc.so.6 (__libc_start_main+0xc8) [0xb7e53ea8] -> ./imap [0x80566a1] Looks like the symbol name resolving doesn't work all that great. But here gdb will help you: gdb ./imap (gdb) b *0x80b2ffa Breakpoint 1 at 0x80b2ffa: file failures.c, line 126. (gdb) b *0x80b2ecc Breakpoint 2 at 0x80b2ecc: file failures.c, line 185. (gdb) b *0x805bbb3 Breakpoint 3 at 0x805bbb3 (gdb) b *0x80634a6 Breakpoint 4 at 0x80634a6: file main.c, line 223. That went pretty well, except for some reason it couldn't figure out where 0x805bbb3 was. To get some kind of an idea about that, you can do: (gdb) x 0x805bbb3 0x805bbb3 <client_create+467>: 0x90909090 If someone knows better ways to do all of this, please tell me too :)

1 0

[Dovecot] Dovecot (unofficial) patches
by Egbert Jan 19 Nov '06

19 Nov '06

Dear list, As a recent dovecot addict, I'm a bit puzzled by the sheer amount of patches available. I have not seen the history of these patches and I could not find a README explainng the patches. Are all these personal wishes/nice to have things or are they (to be) incorporated in dovecot-final? I use rpmbuild to create new rpms from the latest tarball but in that process still several patches are included during the build. I wonder if they are still needed in rc15. I use the orignal spec file (the latest I could find) was created for rc7 and in there I see: Patch2 dovecot-0.99.10-mbox-patch Seems to be to change the order of ./Mail before ./mail Patch3 dovecot-CVE-2006-2414 Overview from CVE db:Directory traversal vulnerability in Dovecot 1.0 beta and 1.0 allows remote attackers to list files and directories under the mbox parent directory and obtain mailbox names via ".." sequences in the (1) LIST or (2) DELETE IMAP command. I'm not a spec file wizard, so I change as less as possible. Unfortunately the maintainer (Jerome Soyer) has never responded to my emails. My server runs Mandriva Official 2007.0 and Postfix 2.3.3 and dovecot rc14 (will move to rc15 soon). TNX EgbertJan (NL)

2 1

[Dovecot] TLS timeout with Thunderbird
by Jason Dixon 19 Nov '06

19 Nov '06

I'm trying to get dovecot working with various clients on my new mailserver. I installed the base rc2 that comes with OpenBSD 4.0, then upgraded to rc14 when I ran into problems with TLS and Thunderbird. The server has no problems with Mail.app on my laptop, but any connection attempts from Thunderbird timeout after the TCP handshake. 13:53:41.074438 66.x.x.2.50483 > 38.x.x.248.993: S 3787736038:3787736038(0) win 65535 <mss 1460,nop,wscale 0,nop,nop,timestamp 2064284084 0,sackOK,eol> (DF) 13:53:41.074554 38.x.x.248.993 > 66.x.x.2.50483: S 1565942120:1565942120(0) ack 3787736039 win 16384 <mss 1460,nop,nop,sackOK,nop,wscale 0,nop,nop,timestamp 2681405076 2064284084> (DF) 13:53:41.459434 66.x.x.2.50483 > 38.x.x.248.993: . ack 1 win 65535 <nop,nop,timestamp 2064284084 2681405076> (DF) 13:53:47.028621 66.x.x.2.50483 > 38.x.x.248.993: F 1:1(0) ack 1 win 65535 <nop,nop,timestamp 2064284096 2681405076> (DF) The only thing logged by dovecot is a disconnection event. There is nothing else logged, even with ssl_verbose enabled. Nov 17 14:23:05 colo2 dovecot: imap-login: Disconnected: rip=66.x.x. 2, lip=38.x.x.248, TLS handshake This happens with Thunderbird 1.5.0.4 and 1.5.0.8 on Mac OS X, and Thunderbird 1.5.0.7 on Windows 2000. Any ideas would be greatly appreciated. Thanks, -- Jason Dixon DixonGroup Consulting http://www.dixongroup.net

7 11

[Dovecot] 1.0.rc15 released
by Timo Sirainen 19 Nov '06

19 Nov '06

http://dovecot.org/releases/dovecot-1.0.rc15.tar.gz http://dovecot.org/releases/dovecot-1.0.rc15.tar.gz.sig * Fixed an off-by-one buffer overflow in cache file handling. The code is executed only with mmap_disable=yes and only if index files are used (ie. INDEX=MEMORY is safe). * passdb checkpassword: Handle vpopmail's non-standard exit codes. - rc14 sometimes assert-crashed if .log.2 file existed in a mailbox (earlier versions leaked memory and file descriptors) - io_add() assert-crashfixes - Potential SSL hang fix at the beginning of the connection

1 0

[Dovecot] Security hole #2: Off-by-one buffer overflow with mmap_disable=yes
by Timo Sirainen 19 Nov '06

19 Nov '06

Version: 1.0test53 .. 1.0.rc14 (ie. all 1.0alpha, 1.0beta and 1.0rc versions so far). 0.99.x versions are safe (they don't even have mmap_disable setting). Problem: When mmap_disable=yes setting is used, dovecot.index.cache file is read to memory using "file cache" code. It contains a "mapped pages" bitmask buffer. In some conditions when updating the buffer it allocates one byte too little. Exploitability: I think it's going to be pretty difficult to cause anything else than a crash, but I wouldn't say impossible. Only logged in IMAP/POP3 users can exploit this. In theory you might be able to exploit this for other users as well by sending them a lot of specially crafted emails, but this requires knowing what dovecot.index.cache file contains. Normally its contents can't be predicted, although perhaps with POP3 users it gets empty often enough that the exploit could be tried. Then again, the exploit requires having at least 4MB cache file, which won't happen with POP3 users before the mailbox has about 170k mails (if I counted right). With IMAP the cache file is used more, so it's easier to fill the 4MB with for example a lot of To-headers. Workaround: Use INDEX=MEMORY so the cache files aren't used at all. Fix: 1.0.rc15 fixes this. You can also use this patch: http://dovecot.org/patches/1.0/file-cache-buffer-overflow-fix.diff

1 0

[Dovecot] I/O leak
by Jim Horner 19 Nov '06

19 Nov '06

I upgraded from rc12 to rc14 last night... sifting through the logs I noticed the following. I point this out since it appears dovecot is in high gear bug-fix mode. This issue is not big for me; I rarely stop dovecot. My init.d script for dovecot is basically stop) killall dovecot imap-login I am guessing there might be a more graceful way to stop dovecot? Or rc14 fixed this? I see in rc14 changelog: - rc13 crashed if client disconnected while IDLEing but only user1 was IDLE. Nov 15 21:53:23 myserver dovecot: IMAP(user1(a)arinbe.com): Disconnected in IDLE Nov 15 21:53:23 myserver dovecot: imap-login: Killed with signal 15 Nov 15 21:53:23 myserver dovecot: IMAP(user2(a)arinbe.com): Disconnected Nov 15 21:53:23 myserver dovecot: imap-login: Killed with signal 15 Nov 15 21:53:23 myserver dovecot: IMAP(user3(a)arinbe.com): Disconnected Nov 15 21:53:23 myserver dovecot: imap-login: Killed with signal 15 Nov 15 21:53:23 myserver dovecot: I/O leak: 0x804d7a0 (17) Nov 15 21:53:23 myserver dovecot: I/O leak: 0x804d7a0 (15) Nov 15 21:53:23 myserver dovecot: I/O leak: 0x804d7a0 (19) Nov 15 21:53:30 myserver postfix/master[31974]: terminating on signal 15 Nov 15 21:54:02 myserver dovecot: Dovecot v1.0.rc14 starting up Jim

2 2

[Dovecot] 1.0.rc14 released
by Timo Sirainen 19 Nov '06

19 Nov '06

http://dovecot.org/releases/dovecot-1.0.rc14.tar.gz http://dovecot.org/releases/dovecot-1.0.rc14.tar.gz.sig More fixes. "Duplicate header extension keywords" is the only known problem (or if I forgot something, remind me). I'll try to figure out a way to reproduce it easily and then get it fixed. * LDAP: Don't try to use ldap_bind() with empty passwords, since Windows 2003 AD skips password checking with them and just returns success. * verbose_ssl=yes: Don't bother logging "syscall failed: EOF" messages. No-one cares about them. + Dovecot sources should now compile without any warnings with gcc 3.2+ - rc13 crashed if client disconnected while IDLEing - LDAP: auth_bind=yes fixes - %variables: Fixed zero padding handling and documented it. %0.1n shouldn't enable it, and it really shouldn't stay for the next %variable. -sign also shouldn't stay for the next variable. - Don't leak opened .log.2 transaction logs. - Fixed a potential hang in IDLE command (probably really rare). - Fixed potential problems with client disconnecting while master was handling the login. - quota plugin didn't work in Mac OS X

4 7

[Dovecot] quota plugin enhancement request
by Michael Tibben 19 Nov '06

19 Nov '06

Hi am having a small issue with the quota plugin In Squirrelmail when a message is deleted, it seems to be copied to the Trash folder *before* it is deleted from the current folder. However if it is a large message being deleted and the mailbox is close to its quota limit, it means dovecot will deny the copy operation as the quota will be exceeded if the message is copied Because of this, I am wondering if it is possible to have an option for the quota plugin to track, but not enforce the quota. This is because I don't require quota enforcement on IMAP, as Postfix will enforce quota on incoming mail anyway. I hope this makes sense... Michael

5 6

[Dovecot] Is "Resource temporarily unavailable" an old problem?
by Ricardo Dias Campos 19 Nov '06

19 Nov '06

Hi. I've installed dovecot recently in a Fedora 5 Linux. It seemed to be OK but I begun to get the message "Can't connect to auth server at default: Resource temporarily unavailable". When I get the message, dovecot hangs. The problem is that "temporarily" is not quite true since the only way to get dovecot running again is to restart it. As a matter of fact, I cannot say that it never recovers. What I know is that it is out for a long, long time. Then a new problem arose: the time between hang-ups begun to diminish. Trying to find why I discovered that the number or dovecot-auth processes was too high (last time I got 169 processes, a lot of them <defuncts>). It seems that, if I kill all these processes, it takes more time before it hangs again. I looked up for messages in the Internet and I found a mail exchange between people from this list. The first hint I got was to upgrade dovecot. As I said, I'm using Fedora 5 and the version distributed with it was dovecot-1.0-0.beta2.7.i386. I upgraded it to dovecot-1.0-0.beta8.2.fc5.i386. I couldn't make any direct relantionship between this versions and the ones in dovecot site so I cannot tell what dovecot version I'm using in terms of dovecot site versioning. Any help is welcome. Thanks, Ricardo

3 3

[Dovecot] CHANGE REQUEST: Move config files out of main $sysconfdir
by Brian G. Peterson 19 Nov '06

19 Nov '06

Currently, dovecot places it's config files in $sysconfdir In Makefile.am, this is defines as: confdir = $(sysconfdir) It would be far more friendly to an already overloaded /etc/ directory, and easier to locate the files, to follow the now-common convention and place files in $sysconfdir / dovecot / ... on most systems this would mean: /etc/dovecot/ If there is only a dovecot.conf, it doesn't really matter, but when additional config files get added for ldap, sql, sieve, it starts to add up. Some distributions already make this change, but placing this change in the dovecot core would make it unnecessary for downstream packagers to make a change to the core dovecot distribution files. Regards, - Brian

3 2

Re: [Dovecot] NTLM authentication from Outlook
by Lars Skovgaard 19 Nov '06

19 Nov '06

> Hi all > > I've enabled ntlm authentication in dovecot, and use dovecot sasl in > postfix as well. > > Authentication with ntlm works well from Mac OS X Mail.app, as well > as from Outlook Express, but fails with Outlook. Strangely enough, > ntml authentication works in Outlook when using smtp (via postfix), > but neither from imap or pop3 (both dovecot). As dovecot sasl handles > all authentication against a mysql userdb, this strikes me as very > strange. > > I've instructed my clients with Outlook to fetch mail using a ssl- > encrypted connection, and to send using ntlm-authentication. This > works, but I would like to have ntlm available as an option to all my > clients, without forcing them to change mail-clients. > > I've turned on auth_verbose, auth_debug and auth_debug_passwords, and > compared the passwordstring with the one calculated using dovecotpw, > and they match. The only odd thing is that the username is returned > from Outlook as an all-caps string, so user(a)domain.tld becomes > USER(a)DOMAIN.TLD. I don't know if it matters, but I don't think so, as > changing the user-login to an all-caps version doesn't solve the > problem. > > Any hints will be most welcome. > > /Lars Greetings, everyone I'm sorry, but I seem to have made a mistake regarding the passwordstring from Outlook – seems like the string I looked at was from MS Entourage... (that's what you get from trying to debug something when you're too tired to think straight). I've now enabled debugging again, and have tried logging in from Outlook with ntlm-authentication. The log-entries are as follows: Nov 16 23:29:09 SD-Server dovecot: auth(default): client in: AUTH 1 NTLM service=IMAP lip=192.168.2.2 rip=192.168.2.13 Nov 16 23:29:09 SD-Server dovecot: auth(default): client out: CONT 1 Nov 16 23:29:09 SD-Server dovecot: auth(default): client in: CONT 1 TlRM7IIog0ADQAuAAAFASgKAAAAD0AABgATVNTUAABYUEFSQkVKRFNHUlVQUAAAABGACgAAA lNQUNEU= Nov 16 23:29:09 SD-Server dovecot: auth(default): client out: CONT 1 TlRMTVNAAAAFAHgAeAAAAAAAADAA +H1XooTUAACAAAAyZ9yMNkAAdgBlAHIALgBsAG8AACYAJgBOAAAAUwBEAC0AUwBlAHIAYwBh AGwAAwAeAFMAyAC4AbABvsAAAAAGMAYRAAtAFMAZQByAHYAZQBQBAAA= Nov 16 23:29:09 SD-Server dovecot: auth(default): client in: CONT 1 TlRMAYAHwAAAAYABgAlAAAAAwADTVNTUAFQAAAAMAAAAAAAAEAH3ZyprYRPWIAAAAAAcgBkA EkATQBBAEMAWABQAAAAACsAAADAAAAGAABIAqMx1XpiwbAAAHAAcwAcABQNAEEAQwBYAFAAT ABpAHMAYQAgAFMAawBvAHYAZwBhAGAAAAAKIAgUBKAoAAAAPSQBAAAAAAAAAAAJILBz4x4RA Ixsp2rhFi8VB6g== Nov 16 23:29:09 SD-Server dovecot: auth(default): ntlm(?, 192.168.2.13): Username contains disallowed characters Nov 16 23:29:10 SD-Server dovecot: auth(default): client out: FAIL 1 The same account logs in without problems if I use a plaintext password (SSL-encrypted, since plaintext-login is disabled). in dovecot.conf I have the following: auth default { mechanisms = plain digest-md5 cram-md5 ntlm rpa } The authentication is done against a mysql-db, which until now has worked with every client I've tested (except Outlook). I have set up postfix to use dovecot-sasl, and use the same userdb for smtp-authentication. Strangely enough the exact same data is accepted when using ntml-authentication with smtp, though a warning is added to my logs. This is an example of a log-entry from an Outlook-user sending a mail: Nov 14 16:40:49 SD-Server postfix/smtpd[8354]: connect from unknown [hid.den.ip.adr] Nov 14 16:40:49 SD-Server dovecot: auth-worker(default): mysql: Connected to localhost (dovecot_auth) Nov 14 16:40:51 SD-Server postfix/smtpd[8354]: warning: unknown [hid.den.ip.adr]: SASL NTLM authentication failed: TlRMTVNTUAACAAMAZYAAQByAHAFAooAOINYZ// +97QAAAAAAAAUwBEAC0AUwBlAHIAdgBlAHIALgBsAG8AYwBhAGwAAwAeAFMARAAtAFAbABvA GMAYAAAAHgAeADAQAAAAAACYAJgBOBZQByAC4sAAAAAAA= Nov 14 16:40:51 SD-Server postfix/smtpd[8354]: AC6402D668E: client=unknown[hid.den.ip.adr], sasl_method=NTLM, sasl_username=user(a)domain.dk Nov 14 16:40:51 SD-Server postfix/cleanup[8358]: AC6402D668E: message- id=<006a01c70803$4dcd1b00$0200a8c0@acerce5220052b> Nov 14 16:41:13 SD-Server postfix/qmgr[8494]: AC6402D668E: from=<user(a)domain.dk>, size=819330, nrcpt=1 (queue active) Nov 14 16:41:16 SD-Server postfix/smtpd[8354]: disconnect from unknown [hid.den.ip.adr] Nov 14 16:41:29 SD-Server postfix/smtp[8361]: AC6402D668E: to=<user(a)otherdomain.dk>, relay=smtp.domain.dk[hid.den.ip.adr]:25, delay=37, delays=22/0.08/0.06/15, dsn=2.0.0, status=sent (250 156794624 mailfe12 Message accepted for delivery) Nov 14 16:41:29 SD-Server postfix/qmgr[8494]: AC6402D668E: removed The same warning is issued from postfix when a user sends mail from Outlook Express, but not when the same user sends from Thunderbird or Mail.app. In fact, I've only seen these problems when the users are using MS products. I really hope someone can shed some light on what is going on. Best regards Lars

2 1

[Dovecot] dovecot:IMAP(user) killed with signal 6
by Spil Oss 18 Nov '06

18 Nov '06

Hi all, After rc10 I have problems with imap and imaps Hi all, After rc10 I have problems with imap and imaps Nov 16 15:42:39 beastie dovecot: IMAP(user1): open(/home/user1/Maildir/.MeldWelSpam/dovecot-keywords) failed: Permission denied Nov 16 15:44:09 beastie dovecot: IMAP(user2): open(/home/user2/Maildir/.MeldWelSpam/dovecot-keywords) failed: Permission denied Nov 16 15:44:09 beastie dovecot: IMAP(user2): file maildir-keywords.c: line 222 (maildir_keywords_lookup_or_create): assertion failed: (mk->synced) Nov 16 15:44:09 beastie dovecot: child 98798 (imap) killed with signal 6 Nov 16 15:46:10 beastie dovecot: IMAP(user2): open(/home/user2/Maildir/.MeldWelSpam/dovecot-keywords) failed: Permission denied Nov 16 15:46:10 beastie dovecot: IMAP(user2): file maildir-keywords.c: line 222 (maildir_keywords_lookup_or_create): assertion failed: (mk->synced) Nov 16 15:46:10 beastie dovecot: child 98819 (imap) killed with signal 6 The Permission denied messages where there in rc10 as well, but that was not causing problems. These folders are symlinks to shared spam and ham folders for spamassassin learning. Any clue on how to fix this? FreeBSD-i386 6.1-RELEASE-p10 dovecot-1.0.r13 from ports Kind regards, Spil.

3 3

[Dovecot] updated gentoo ebuild provides dovecot-sieve
by Brian G. Peterson 18 Nov '06

18 Nov '06

I'm hoping that there are some Gentoo users on this list who will chime in on a bug that is near and dear to my heart. We've created an updated Gentoo ebuild that adds a sieve USE flag and builds dovecot-sieve if the use flag is enabled. The gentoo bug is here: https://bugs.gentoo.org/show_bug.cgi?id=141743 and the ebuild is available as an attachment to that bug, or as a patch attachment (in case you're not running rc14, or just prefer the look of a unified diff) Any gentoo users on this list are urged to install from the ebuild/patch on the bug, and *report back* on the bug or this list, so that the Gentoo dev will know that it's safe to add this to portage CVS. Thank You. Regards, - Brian

2 1

[Dovecot] Dovecot LDA, LDAP, Postfix and Spawning programs..
by Jorgen Lundman 18 Nov '06

18 Nov '06

Qmail, when using LDAP, a user can specify delvieryProgramPath, or a .qmail file, to launch something like procmail. Qmail correctly setuid() to the uids set for the user in LDAP, as well as set up the common env vars (HOME, USER, MAILDIR). We moved to Postfix but found that it is quite lacking in the features supported when it comes to "virtual" users. No .forward, and if you set up an alternate transport, they are run as "any user but root, nor postfix, nor the virtual-user's uid". And worse, does not even supply the HOME/MAILDIR values to transport delivery plugin. (Forcing it to getpwnam() or similar). I have an option to make my own setuid program to query LDAP (postmap -q would work), setuid() and call, say, procmail. It has been suggested I can use "maildrop" as it can talk to LDAP. However, I picked "Dovecot" as my pop3/imap program due to an irrational dislike of Courier imap. So, if I tried Dovecot-LDA, would it support the user optionally having a ".forward" file, or perhaps the LDAP attribute deliveryProgramPath, or some other way to filter based on subject/body to sort, and/or forward, mail? If it can use LDAP, will it setuid() to the users uid (as set in LDAP, assuming I cook the LDAP conf entries correctly) when delivering(I'd hope so!) and running external filters? I am still running rc10, which works well but flips out regularly. (Previously mentioned 'too many files open' bug, some leaks in locks) I will upgrade when the LDAP changes are deemed stable. Lund -- Jorgen Lundman | <lundman(a)lundman.net> Unix Administrator | +81 (0)3 -5456-2687 ext 1017 (work) Shibuya-ku, Tokyo | +81 (0)90-5578-8500 (cell) Japan | +81 (0)3 -3375-1767 (home)

2 1

[Dovecot] Failed Assert in RC13 on FC4
by Joseph D. Wagner 18 Nov '06

18 Nov '06

I received the following notices from logwatch: dovecot: IMAP(userid): file ioloop.c: line 22 (io_add): assertion failed: (fd >= 0): 1 Time(s) dovecot: child 16976 (imap) killed with signal 6: 1 Time(s) Please let me know if you need any further information from me. Joseph D. Wagner

2 1

[Dovecot] two assertion failures
by Mikhail Teterin 18 Nov '06

18 Nov '06

Hello! I was able to overcome the earlier-reported problems (of dovecot treating the standard mailboxes in /var/mail/ as directories) by specifying mail_location (continuing to use the 0.99-era dovecot.conf did not work). Then I started seeing assertion-failures like: file istream-raw-mbox.c: line 499 (istream_raw_mbox_get_body_size): assertion failed: (rstream->mail_size != (uoff_t)-1) these disappeared, when I disabled mmap-access (mmap is limited to 1Gb on FreeBSD/i386), although dovecot-0.99 worked... I can now get to my mail again, but every once in a while the following assertion kills the connection: file mail-transaction-log.c: line 273 (mail_transaction_log_close): assertion failed: (log->files == NULL) Please, advise... Thanks! -mi

2 1

[Dovecot] Auth checking also the service
by Alex 18 Nov '06

18 Nov '06

Hello everyone. I'm switching to dovecot from courier-imap and after some problems with Apple Mail client, now everything seems to be fine. The only problem that I have not solved yet is to check also the service (pop3, pop3s, imap, imaps) in the authentication phase. In courier-authlib I do this: MYSQL_SELECT_CLAUSE SELECT username, \ password, \ "", \ 1002, \ 1003, \ '/vmail', \ maildir, \ quota, \ name, \ "" \ FROM mailbox \ WHERE username="$(local_part)@$(domain)" \ AND active=1 \ AND $(service)=1 where $(service) can be pop3, pop3s, imap or imaps. Is it possible to do a similar thing in dovecot? Thank you in advance, Alex

3 4

[Dovecot] sieve newbie question
by matteo＠progettomio.net 17 Nov '06

17 Nov '06

Hi all, can you clarify my doubts about sieve? I understand what is it, but what's the different between use exim with rules + dovecot and use exim + dovecot-lda + sieve rules? i can create many kind of rules on exim, then i don't get the difference. if someone is so kind to explain me the main points i'll appreciate it! Regards, Matteo

3 3

[Dovecot] Help needed
by Ricardo Dias Campos 17 Nov '06

17 Nov '06

Hi. Days ago I sent a message to this list asking for help on a problem that seemed to me to be old: dovecot hangs and dovecot-auth posts log messages like: Nov 16 17:04:39 netuno dovecot: imap-login: Can't connect to auth server at default: Resource temporarily unavailable Nov 16 17:04:42 netuno dovecot: pop3-login: Can't connect to auth server at default: Resource temporarily unavailable Unfortunatelly when this happens the only way to recover is to restart dovecot. After I while I begun to clean the dovecot-auth processes (defunct or not) that remain in the process list and the cycle of running/hunging restart from 1 hang a day until it reaches 1 hang each 10 minutes, when I kill dovecot-auth again. I've seen some days ago some messages related to this problem but they were inconclusive, meaning that they didn't point to a solution. Any help is welcome. Thanks. Ricardo

1 0

[Dovecot] LDA Question
by Jeff 17 Nov '06

17 Nov '06

I need some advice about replacing maildrop with the Dovecot LDA. I need to replicate a setup that uses postfix+maildrop+spamassassin. We'll be using Dovecot 1rc13. In the current setup, maildrop reads a file called .mailfilter in each user's folder, then call spamassassin according to the user's preferences. The file is simple, and looks like this -- if ( $SIZE > 20971520 ) { EXITCODE=77 echo "Your email was rejected because it exceeded limit of 20 MB" exit } if ( $SIZE < 26144 ) { exception { xfilter "/usr/local/bin/spamc -u user(a)domain.com" } } exception { to "$DEFAULT/Maildir/" } What is the most straightforward way to have 'Deliver' do the same thing, without changing the way that SA gets called? Apologies in advance if this is a boneheaded question. I've been sorting through Sieve documentation and HOWTOs and I see everything but what I need.

2 1

[Dovecot] maildirsize update error?
by Maykel Moya 16 Nov '06

16 Nov '06

According to [1], Trash is a reserverd folder name. When moving a message to it, maildirsize should be update with a negative byte count. If I move a message from any folder to Trash, maildirsize gets two lines, one positive and one negative. The problem is that a user can't move messages to Trash while being overquota because the positive entry goes before the negative. I'm using dovecot-1.0rc14. Regards maykel [1] http://www.inter7.com/courierimap/README.maildirquota.html

1 0

[Dovecot] Dovecot tries to create bogus files in /var/mail
by Mikhail Teterin 16 Nov '06

16 Nov '06

After upgrading from 0.99.2 to 1.0rc14, I started seeing log-entries like: Nov 16 12:56:22 corbulon dovecot: IMAP(mksarch): mkdir_parents(/var/mail/mksarch/.imap/INBOX) failed: Not a directory Nov 16 12:56:51 corbulon dovecot: IMAP(anat): open(/var/mail/anat/inbox, O_CREAT) failed: Not a directory Nov 16 12:56:51 corbulon dovecot: IMAP(anat): mkdir_parents(/var/mail/anat/.imap/INBOX) failed: Not a directory And my IMAP client (KMail) shows up error message with "Internal server error". The files in /var/mail/ are just that -- files (in the bad old Unix mbox format), and not directories, why is dovecot treating them as directories? Please advise... Thanks! -mi

1 0

[Dovecot] NFSV4?
by Charles Marcus 16 Nov '06

16 Nov '06

Hi Timo, I just read about NFSv4 now being included in SuSE and Redhat Enterprise versions, and although I don't use it myself, wondered how this will impact Dovecot for those using it? Will it make life easier? Or is it even supported currently? Just curious... thanks... -- Best regards, Charles

3 3

[Dovecot] Dovecot's MySQL authentication driver
by guard 16 Nov '06

16 Nov '06

Hi, I'm wonderig if dovecot have any mechanism which prevent sql injection? I didn't find anything about that. How can I escape inputs in sql query? Best regards.

7 7

[Dovecot] Problem with authentication?
by Lisa Rau 15 Nov '06

15 Nov '06

We have things set up so Outlook and Outlook express are sending passwords via plain text, but Dovecot is saying the server was expecting an excrypted password -- can anyone help / give us a list of things to look at??? Hopefully, Lisa

4 3

[Dovecot] dovecot & pine
by erald troja 15 Nov '06

15 Nov '06

Hello, using dovecot-1.0.r12 on a 6.1 FreeBSD system and pine-4.64 on FreeBSD as well. After switching from Courier..i cannot seem to access my folders anymore. Just INBOX is viewable. On different mail clients on has to resubscribe..yet there's no such feature w/Pine. Anyone ever had this issue? Also, let me know what sort of info you need me to post in here to get some help on this. Thanks

2 2

[Dovecot] 1.0.rc13 released
by Timo Sirainen 15 Nov '06

15 Nov '06

http://dovecot.org/releases/dovecot-1.0.rc13.tar.gz http://dovecot.org/releases/dovecot-1.0.rc13.tar.gz.sig I'll just keep on making new releases now whenever something important is fixed. Hopefully there shouldn't be many left anymore. Most of the bugs fixed in this release were found by stress testing with my imaptest tool (http://dovecot.org/tools/imaptest.c) If you're interested in knowing how perfectly your Dovecot setup works (especially if you're using NFS), you could try the tool yourself also. I still see one crash with mmap_disable=yes, but it's pretty rare. Will see if I get it fixed before v1.0, but it's not that important. + deliver: If we're executing as a normal system user, get the HOME environment from passwd if it's not set. This makes it possible to run deliver from .forward. - Older compilers caused LDAP authentication to crash - Dying LDAP connections weren't handled exactly correctly in rc11, although it seemed to work usually - Fixed crashes and memory leaks with AUTHENTICATE command - Fixed crashes and leaks with IMAP/POP3 proxying - maildir: Changing a mailbox while another process was saving a message there at the same may have caused the changes to not be made into the maildir, which could have caused other problems later..

4 9

[Dovecot] Dovecot/Postfix SASL problem
by Tomislav Filipčić 15 Nov '06

15 Nov '06

Hi. I'm trying to get Dovecot - Postfix - SASL to work. But I need some help. Dovecot v1.0.rc14 Postfix 2.3.4 dovecot.conf ---------------- auth default { mechanisms = plain login passdb pam { } passdb passwd { } socket listen { client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } } } postfix/main.cf ------------------ smtpd_sasl_auth_enable = yes smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination broken_sasl_auth_clients = yes smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth smtpd_sasl_authenticated_header = yes telnet test session ----------------------- orion:~ tomislav$ telnet ra.mahune.org 25 Trying 63.99.9.80... Connected to ra.mahune.org. Escape character is '^]'. 220 ra.mahune.org ESMTP Postfix EHLO ra.mahune.org 250-ra.mahune.org 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-AUTH PLAIN LOGIN 250-AUTH=PLAIN LOGIN 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN AUTH PLAIN bmFddAc0b2pvAHRvam8= 535 5.7.0 Error: authentication failed: mail logs: ------------- Nov 14 22:21:38 [postfix/smtpd] connect from 83-131-68-11.adsl.net.t-com.hr[83.131.68.11] Nov 14 22:22:24 [dovecot] auth(default): client in: AUTH_1_PLAIN_service=smtp_resp=bmFddAc0b2pvAHRvam8= Nov 14 22:22:24 [dovecot] auth(default): passdb(najt,master): Attempted master login with no master passdbs Nov 14 22:22:25 [dovecot] auth(default): client out: FAIL_1_user=tojo Nov 14 22:22:25 [postfix/smtpd] warning: 83-131-68-11.adsl.net.t-com.hr[83.131.68.11]: SASL PLAIN authentication failed: Any ideas? Thank you

3 2