- dovecot - dovecot.org

Re: [Dovecot] Lots of pop3-logins
by V S Rao 25 Jun '09

25 Jun '09

> Hello, > > Doing a "ps aux" on my Slackware box, I have approx 100 PID's of "pop3-login's going on. This is a production mail server, but it is getting VERY low traffic. In fact, only 3 people can "pop3" into it. I've check their e-mail clients, and they are not checking mail any more often than every 5 minutes. > > This is a new installation and I've had the server up and running since Sunday. If it matters, I'm using Postfix for the MTA and using the Dovecot SASL library to AUTH SMTP. > > Is this a cause for concern? Why does Dovecot need this many processes? > >> Because dovecot preforks the *-login processes to speed-up the login. >> No need to worry. 100 login sessions for just 3 connections? That is not right, no matter what. There is definitely some issue. Once the load increases the system will start timing out on POP3 connections or other network connections, such as IMAP, SSH etc. Better check out the system logs, utilization etc. for any abnormal values. Regards Rao

2 1

[Dovecot] Lots of pop3-logins
by Rodman Frowert 25 Jun '09

25 Jun '09

Hello, Doing a "ps aux" on my Slackware box, I have approx 100 PID's of "pop3-login's going on. This is a production mail server, but it is getting VERY low traffic. In fact, only 3 people can "pop3" into it. I've check their e-mail clients, and they are not checking mail any more often than every 5 minutes. This is a new installation and I've had the server up and running since Sunday. If it matters, I'm using Postfix for the MTA and using the Dovecot SASL library to AUTH SMTP. Is this a cause for concern? Why does Dovecot need this many processes? Thanks! Rodman

3 3

Re: [Dovecot] deliver does not update maildirsize
by ftriboix＠falcon-one.com 24 Jun '09

24 Jun '09

Hi Timo, Thank you very much for replying! > What does your configuration look like now? v1.1 has different quota > configuration. Is the problem only with deliver, or is imap also not > updating quota? And dovecot -n unfortunately doesn't show > protocol lda {} contents, so could you show them too? And finally, > enable mail_debug=yes and paste its logs when a message is delivered. mail_debug was already enabled, actually. maildirsize is not updated with imap now. If I logged in imap with dovecot 1.0.13, maildirsize was updated. This is not the case anymore with dovecot 1.1.16 ... I am actually realizing something. Do I need to add the "quota" plugin in the "protocol lda {}" section of dovecot.conf? Please find the configuration information below: # dovecot -n # 1.1.16: /etc/dovecot-1.1.16/dovecot.conf # OS: Linux 2.6.27.10-grsec-xxxx-grs-ipv4-32 i686 Debian 4.0 ext3 base_dir: /var/dovecot-1.1.16 log_path: /var/dovecot-1.1.16/log/errors.log info_log_path: /var/dovecot-1.1.16/log/info.log ssl_disable: yes disable_plaintext_auth: no login_dir: /var/dovecot-1.1.16/login login_executable: /usr/local/dovecot-1.1.16/libexec/dovecot/imap-login login_user: ldovecotlogin mail_location: maildir:/var/vmail/%d/%n mail_debug: yes mail_plugins: quota imap_quota auth default: mechanisms: plain login user: nobody chroot: /var/dovecot-1.1.16 verbose: yes debug: yes debug_passwords: yes passdb: driver: sql args: /etc/dovecot-1.1.16/dovecot-mysql-passdb.conf userdb: driver: sql args: /etc/dovecot-1.1.16/dovecot-mysql-userdb.conf socket: type: listen client: path: /var/postfix-2.5.1/private/auth.dovecot mode: 432 user: lpostfix group: lpostfix master: path: /var/dovecot-1.1.16/auth-master mode: 384 user: vmail group: vmail plugin: quota: maildir:Quota protocol lda { # Address to use when sending rejection mails. postmaster_address = postmaster@MyDomain # Hostname to use in various parts of sent mails, eg. in Message-Id. # Default is the system's real hostname. #hostname = # Support for dynamically loadable plugins. mail_plugins is a space separated # list of plugins to load. #mail_plugins = #mail_plugin_dir = /usr/lib/dovecot/lda # Binary to use for sending mails. #sendmail_path = /usr/lib/sendmail # UNIX socket path to master authentication server to find users. #auth_socket_path = /var/run/dovecot/auth-master log_path = /var/dovecot-1.1.16/log/delivery.log auth_socket_path = /var/dovecot-1.1.16/auth-master } # egrep '^deliver.test' info.log | tail deliver(test@MyDomain): Jun 24 13:28:35 Info: auth input: uid=5000 deliver(test@MyDomain): Jun 24 13:28:35 Info: auth input: gid=5000 deliver(test@MyDomain): Jun 24 13:28:35 Info: auth input: mail=maildir:/home/vmail/MyDomain/test deliver(test@MyDomain): Jun 24 13:28:35 Info: auth input: home=/home/vmail/MyDomain/test/home deliver(test@MyDomain): Jun 24 13:28:35 Info: auth input: quota=maildir:Quota deliver(test@MyDomain): Jun 24 13:28:35 Info: auth input: quota_rule=*:storage=1024 deliver(test@MyDomain): Jun 24 13:28:35 Info: auth input: quota_rule2=Trash:storage=50M deliver(test@MyDomain): Jun 24 13:28:35 Info: Home dir not found: /home/vmail/MyDomain/test/home deliver(test@MyDomain): Jun 24 13:28:35 Info: maildir: data=/home/vmail/MyDomain/test deliver(test@MyDomain): Jun 24 13:28:35 Info: maildir++: root=/home/vmail/MyDomain/test, index=, control=, inbox=/home/vmail/MyDomain/test deliver(test@MyDomain): Jun 24 13:28:35 Info: msgid=<290034.94281.qm(a)web24608.mail.ird.yahoo.com>: saved mail to INBOX deliver(test@MyDomain): Jun 24 16:59:57 Info: auth input: uid=5000 deliver(test@MyDomain): Jun 24 16:59:57 Info: auth input: gid=5000 deliver(test@MyDomain): Jun 24 16:59:57 Info: auth input: mail=maildir:/home/vmail/MyDomain/test deliver(test@MyDomain): Jun 24 16:59:57 Info: auth input: home=/home/vmail/MyDomain/test/home deliver(test@MyDomain): Jun 24 16:59:57 Info: auth input: quota=maildir:Quota deliver(test@MyDomain): Jun 24 16:59:57 Info: auth input: quota_rule=*:storage=1024 deliver(test@MyDomain): Jun 24 16:59:57 Info: auth input: quota_rule2=Trash:storage=50M deliver(test@MyDomain): Jun 24 16:59:57 Info: Home dir not found: /home/vmail/MyDomain/test/home deliver(test@MyDomain): Jun 24 16:59:57 Info: maildir: data=/home/vmail/MyDomain/test deliver(test@MyDomain): Jun 24 16:59:57 Info: maildir++: root=/home/vmail/MyDomain/test, index=, control=, inbox=/home/vmail/MyDomain/test deliver(test@MyDomain): Jun 24 16:59:57 Info: msgid=<542353.92671.qm(a)web24614.mail.ird.yahoo.com>: saved mail to INBOX # cat maildirsize 1048576S 1846384 10 Best regards, Fabrice

2 2

[Dovecot] Quota_rules ignored
by A. Gideonse 24 Jun '09

24 Jun '09

Today I upgraded to version 1.1.16 of Dovecot (and Sieve), because I wanted to use mailbox quotas. I tried using the instructions on http://wiki.dovecot.org/Quota/1.1 and simular websites for 4 hours now, but it seems that all quota_rules are ignored. Also, whenever I use a '*' in my MySQL query I get the error: 'unknown quota backend'. With the following query the quota from the database is used (if value is not NULL), but the quota_rules are ignored once again: user_query = SELECT maildir AS home, 5000 AS uid, 5000 AS gid, CONCAT('maildir:storage=', quota) AS quota FROM mailbox WHERE username = '%u' Below is my configuration: # 1.1.16: /etc/dovecot/dovecot.conf # OS: Linux 2.6.24-19-virtual i686 Ubuntu 8.04.1 nfs log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s ssl_disable: yes disable_plaintext_auth: no login_dir: /usr/local/var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login mail_privileged_group: mail mail_location: maildir:/data/vmail/%d/%n mail_debug: yes mmap_disable: yes dotlock_use_excl: no mbox_write_locks: fcntl mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 auth default: mechanisms: plain login debug: yes passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: passwd userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: static args: uid=5000 gid=5000 home=/home/vmail/%d/%n allow_all_users=yes socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail plugin: quota: maildir:User quota quota_rule: *:storage=1G quota_rule2: .Trash:storage=100M Any thoughts on how to solve this problem? Thanks in advance!

3 14

[Dovecot] deliver does not update maildirsize
by ftriboix＠falcon-one.com 24 Jun '09

24 Jun '09

Hello, I have installed postfix 2.5.1 + dovecot 1.0.13 + MySQL and it all works perfectly. I use deliver as the local delivery agent and use IMAP only with maildir mailboxes. I am using virtual mailboxes. Now I wanted to introduce quotas, but I can't manage to make them work. Quota information is retreived from MySQL in userdb requests. I have noticed that the maildirsize file is not updated by deliver when a new mail comes in. I don't know if this is correct or not... It is updated though when I log in. But even then mails are still received without any kind of problem while the mailbox is well over the quota. I tried to add a "-v" option to deliver in postfix's master.cf to debug deliver, but it apparently does not like this option. Please find below my postfix and dovecot's configurations. Thank you very much for any help. NB: I removed some sensitive configuration option for this email NB2: The user in question has a quota of 1MB # postconf -n alias_maps = mysql:/etc/postfix-2.5.1/mysql-localalias.cf append_at_myorigin = no append_dot_mydomain = no biff = no command_directory = /usr/local/postfix-2.5.1/sbin config_directory = /etc/postfix-2.5.1 daemon_directory = /usr/local/postfix-2.5.1/libexec data_directory = /var/postfix-2.5.1/data debug_peer_level = 2 html_directory = /usr/local/postfix-2.5.1/doc/html mail_owner = lpostfix mail_spool_directory = /var/mail mailq_path = /usr/local/postfix-2.5.1/bin/mailq manpage_directory = /usr/local/postfix-2.5.1/man mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain mydomain = MyHostingDomain myhostname = MyMachine.MyHostingDomain mynetworks_style = host myorigin = $mydomain newaliases_path = /usr/local/postfix-2.5.1/bin/newaliases queue_directory = /var/postfix-2.5.1 readme_directory = /usr/local/postfix-2.5.1/doc/text relay_domains = relayhost = [MyRelayHost] sample_directory = /etc/postfix-2.5.1 sendmail_path = /usr/sbin/sendmail setgid_group = lpostdrop smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix-2.5.1/tmp-sasl-pwd smtp_sasl_security_options = noanonymous smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_non_fqdn_hostname, reject_non_fqdn_sender, reject_non_fqdn_recipient, reject_unauth_destination, reject_unauth_pipelining, reject_invalid_hostname smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = private/auth.dovecot smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot syslog_facility = local0 unknown_local_recipient_reject_code = 550 virtual_alias_maps = mysql:/etc/postfix-2.5.1/mysql-alias.cf,mysql:/etc/postfix-2.5.1/mysql-global-alias.cf,mysql:/etc/postfix-2.5.1/mysql-email2email.cf virtual_gid_maps = static:5000 virtual_mailbox_domains = mysql:/etc/postfix-2.5.1/mysql-domain.cf virtual_mailbox_maps = mysql:/etc/postfix-2.5.1/mysql-mailbox.cf virtual_transport = dovecot virtual_uid_maps = static:5000 # cat master.cf # # Postfix master process configuration file. For details on the format # of the file, see the master(5) manual page (command: "man 5 master"). # # Do not forget to execute "postfix reload" after editing this file. # # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== smtp inet n - n - - smtpd #submission inet n - n - - smtpd # -o smtpd_tls_security_level=encrypt # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #smtps inet n - n - - smtpd # -o smtpd_tls_wrappermode=yes # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #628 inet n - n - - qmqpd pickup fifo n - n 60 1 pickup cleanup unix n - n - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - n 300 1 oqmgr tlsmgr unix - - n 1000? 1 tlsmgr rewrite unix - - n - - trivial-rewrite bounce unix - - n - 0 bounce defer unix - - n - 0 bounce trace unix - - n - 0 bounce verify unix - - n - 1 verify flush unix n - n 1000? 0 flush proxymap unix - - n - - proxymap proxywrite unix - - n - 1 proxymap smtp unix - - n - - smtp # When relaying mail as backup MX, disable fallback_relay to avoid MX loops relay unix - - n - - smtp -o smtp_fallback_relay= # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - n - - showq error unix - - n - - error retry unix - - n - - error discard unix - - n - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - n - - lmtp anvil unix - - n - 1 anvil scache unix - - n - 1 scache dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/local/dovecot-1.0.13/libexec/dovecot/deliver -f ${sender} -d ${recipient} # dovecot -n # 1.0.13: /etc/dovecot-1.0.13/dovecot.conf base_dir: /var/dovecot-1.0.13 log_path: /var/dovecot-1.0.13/log/errors.log info_log_path: /var/dovecot-1.0.13/log/info.log ssl_disable: yes disable_plaintext_auth: no login_dir: /var/dovecot-1.0.13/login login_executable: /usr/local/dovecot-1.0.13/libexec/dovecot/imap-login login_user: ldovecotlogin mail_location: maildir:/var/vmail/%d/%n mail_debug: yes maildir_copy_with_hardlinks: yes mail_plugins: quota imap_quota auth default: mechanisms: plain login user: nobody chroot: /var/dovecot-1.0.13 verbose: yes debug: yes debug_passwords: yes passdb: driver: sql args: /etc/dovecot-1.0.13/dovecot-mysql-passdb.conf userdb: driver: sql args: /etc/dovecot-1.0.13/dovecot-mysql-userdb.conf socket: type: listen client: path: /var/postfix-2.5.1/private/auth.dovecot mode: 432 user: lpostfix group: lpostfix master: path: /var/dovecot-1.0.13/auth-master mode: 384 user: vmail group: vmail plugin: quota: maildir:storage=10240:ignore=Trash # cat dovecot-mysql-passdb.conf driver = mysql connect = [ --- snip --- ] default_pass_scheme = PLAIN-MD5 password_query = SELECT password FROM view_vuser WHERE email = '%u' AND active = 1 # cat dovecot-mysql-passdb.conf driver = mysql connect = [ --- snip --- ] default_pass_scheme = PLAIN-MD5 user_query = SELECT 5000 AS uid, 5000 AS gid, CONCAT("maildir:", mail) AS mail, CONCAT(mail, "/home") AS home, CONCAT("maildir:storage=", quota_mb * 1024, ":ignore=Trash") AS quota FROM view_vuser WHERE email = '%u' AND active = 1 # ls -l maildirsize -rw------- 1 vmail vmail 20 2009-06-23 08:47 maildirsize # cat maildirsize 1048576S 1846384 10

3 3

[Dovecot] Dovecot Problem
by Robert Sloan 24 Jun '09

24 Jun '09

Every 2 or 3 days dovecot will not allow me to log into my IMAP server. It keeps requesting my username and password. If I do a /etc/init.d/dovecot restart it will start working again for a few days. I have dovecot set up to use Maildir. Dovecot Version: Not sure but it is the one that comes with Ubuntu 9.04 OS: Ubuntu 9.04 CPU: x86 Filesystem: Local EXT4 Dovecot Config: # 1.1.11: /etc/dovecot/dovecot.conf # OS: Linux 2.6.28-11-server i686 Ubuntu 9.04 log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_privileged_group: mail mail_location: maildir:~/Maildir mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 auth default: passdb: driver: pam userdb: driver: passwd Thanks.

2 3

[Dovecot] Asked about Dovecot Logging
by Jose Luis Marin Perez 24 Jun '09

24 Jun '09

Dear Sirs, I was able to migrate successfully from Courier-Imap to Dovecot, Timo I appreciate your help. I have notices that the file /var/log/dovecot.log shows the following: dovecot: Jun 23 15:04:05 Info: imap-login: Login: user=<dtoledo>, method=PLAIN, rip=172.16.10.15, lip=172.16.10.19 dovecot: Jun 23 15:04:06 Info: imap-login: Login: user=<abonilla>, method=PLAIN, rip=172.16.10.14, lip=172.16.10.19 dovecot: Jun 23 15:04:06 Info: IMAP(abonilla): Disconnected: Logged out bytes=59/566 dovecot: Jun 23 15:04:06 Info: imap-login: Login: user=<slopez>, method=PLAIN, rip=172.16.10.14, lip=172.16.10.19 dovecot: Jun 23 15:04:06 Info: IMAP(slopez): Disconnected: Logged out bytes=59/567 dovecot: Jun 23 15:04:06 Info: IMAP(dtoledo): Disconnected: Logged out bytes=1252/34481 dovecot: Jun 23 15:04:07 Info: imap-login: Login: user=<slopez>, method=PLAIN, rip=172.16.10.14, lip=172.16.10.19 dovecot: Jun 23 15:04:07 Info: IMAP(slopez): Disconnected: Logged out bytes=59/567 dovecot: Jun 23 15:04:07 Info: IMAP(framirez): Disconnected: Logged out bytes=1252/34041 dovecot: Jun 23 15:04:08 Info: imap-login: Login: user=<mgomez>, method=PLAIN, rip=172.16.10.14, lip=172.16.10.19 dovecot: Jun 23 15:04:10 Info: IMAP(mgomez): Disconnected: Logged out bytes=1805/66570 dovecot: Jun 23 15:04:13 Info: imap-login: Login: user=<curibe>, method=PLAIN, rip=172.16.10.14, lip=172.16.10.19 dovecot: Jun 23 15:04:15 Info: IMAP(curibe): Disconnected: Logged out bytes=749/351591 Given that there are several domains hosted on the server, how can I configure Dovecot to the log file shows the full user name. Example: user=<user1(a)dominio1.com> user=<user2(a)dominio2.com> Thanks Jose Luis _________________________________________________________________ Invite your mail contacts to join your friends list with Windows Live Spaces. It's easy! http://spaces.live.com/spacesapi.aspx?wx_action=create&wx_url=/friends.aspx…

2 9

[Dovecot] Deliver, sieve and duplicate message
by jean-Noël Chardron 24 Jun '09

24 Jun '09

Hello, Some users subscribe to several mailing lists which causes them to have the same message several times what they do not want . Today we use procmail as delivery agent to discard duplicate message, we want to migrate to dovecot deliver + sieve I read a previous post about the duplicate messages : http://www.dovecot.org/list/dovecot/2007-March/021085.html But I do not understand if this feature exists and how to activate Some explanations or documentation would be welcome. thank you, -- Jean-Noel Chardron

2 1

[Dovecot] dovecot-antispam problem with sa-learn
by maxlosblob＠tiscali.it 24 Jun '09

24 Jun '09

Hi all, I just set up a dovecot+postfix+roundcubemail+spamassassin system with virtual users. These applications work fine, I have a problem with the dovecot-antispam plugin. Dovecot is compiled from tarball, version 1.1.16, the plugin is version 1.2. The problem is that when I move messages from or to "Posta indesiderata", which is in antispam_spam list, nothing happens. I have no logs about sa-learn activity in /var/log/maillog, nor in /var/log messages, no matter if I set DEBUG=syslog or DEBUG=stderr. Here are my confs: dovecot-antispam .config BACKEND=mailtrain USER=root GROUP=root DEBUG=syslog DEBUG_VERBOSE=5 PLUGINNAME=antispam dovecot -n # 1.1.16: /usr/local/etc/dovecot.conf # OS: Linux 2.6.18-sblob i686 CentOS release 5.2 (Final) simfs protocols: imap pop3 ssl_disable: yes disable_plaintext_auth: no login_dir: /usr/local/var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login last_valid_uid: 500 first_valid_gid: 500 last_valid_gid: 500 mail_location: maildir:/var/virtual/%d/%n/Posta mail_debug: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable (pop3): /usr/local/libexec/dovecot/pop3 mail_plugins(default): listescape antispam mail_plugins(imap): listescape antispam mail_plugins (pop3): mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir (pop3): /usr/local/lib/dovecot/pop3 namespace: type: private separator: / inbox: yes list: yes subscriptions: yes auth default: passdb: driver: sql args: /etc/dovecot-sql.conf userdb: driver: static args: uid=500 gid=500 home=/var/virtual/% d/%u plugin: antispam_trash: trash;Trash;Deleted Items;Cestino; antispam_spam: Spam;Posta indesiderata;.Posta indesiderata;SPAM;.SPAM antispam_mail_sendmail: /usr/bin/sa-learn antispam_mail_spam: --spam antispam_mail_notspam: --ham antispam_mail_tmpdir: /tmp Thanks in advance Max Non rinunciare ai tuoi ricordi...Tiscali Photo affronta la crisi con incredibili offerte http://photo.tiscali.it

2 1

[Dovecot] v1.2.rc6 released
by Timo Sirainen 24 Jun '09

24 Jun '09

http://dovecot.org/releases/1.2/rc/dovecot-1.2.rc6.tar.gz http://dovecot.org/releases/1.2/rc/dovecot-1.2.rc6.tar.gz.sig I think it's time to get v1.2.0 released soon. There is apparently still one rare crashing bug in virtual plugin, but unless someone can reproduce the bug I'm not going to delay v1.2.0 because of it. The release plan is: - Release v1.2.rc7 next Friday (assuming there have been some fixes) - Release v1.2.0 the next Monday I'll be giving a Dovecot talk in Berlin on July 2nd, and I really want to have v1.2.0 released by them. So July 1st is the absolute final deadline for v1.2.0. :) Changes since rc5: * imap proxy: Pass through to client unexpected untagged replies from remote server (e.g. alerts). * Solr: Don't use "any" copyfield, it doubles the index size. * mail_location: Allow using ":" characters in dir names by escaping it as "::". - mbox: Don't crash with invalid From_-lines. - IMAP: Don't crash if IDLE command is pipelined after a long-running UID FETCH or UID SEARCH. - ACL / shared mailbox fixes - Some metadata files were incorrectly getting 0666 permissions.

4 3

[Dovecot] courier-imap 2 Dovecot Migration
by Odhiambo ワシントン 24 Jun '09

24 Jun '09

I have a question about migration from courier-imap. I have a server running courier-imap which I'd like to change to dovecot. The problem at hand is that there are POP3 users as well as IMAP4 users.Some of the POP3 users have the option to "leave a copy of the message on the server" set in their MuAs. Is it possible to migrate from courier-imap --> Dovecot and not have these people re fetching all their old e-mails all over again? -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ "If you have nothing good to say about someone, just shut up!." -- Lucky Dube

2 1

[Dovecot] tcp_wrappers
by listmail 23 Jun '09

23 Jun '09

Hi, I've just started using Dovecot (v1.1.14), and I'm noticing a lot of dictionary attacks. I searched through the documentation and the mailing list archives hoping to find support for tcp_wrappers (hosts.deny) support. I did find some suggested patches in the list from last year, but as far as I can tell, there is no support in the released versions. Is this implemented and undocumented, or just unimplemented? I would be surprised to find it unimplemented in such an otherwise sophisticated project. Thanks in advance, --Bill

4 3

[Dovecot] A X-Mailbox header?
by Alessandro Ranellucci 23 Jun '09

23 Jun '09

Hi all, I'm waiting for the virtual mailbox feature in order to make a single POP3 access to retrieve messages contained in all my mailbox folders. This is because I use webmail and other IMAP clients but my main workstation uses a POP3-only client. I was wondering if there's a way to keep the name of the folder containing each message while retrieving via POP3. I guess this could be done by dynamically adding a header to messages at retrieval time. Is there a feature for this or a plugin API? Otherwise I was thinking about modifying the messages themselves on the server using a script. However, such a script would need to be run when a IMAP user moves a message to a folder and I believe Dovecot doesn't provide a trigger/hook mechanism. I also don't know if modifying stored messages is allowed since it could break some caching/hashing mechanism. Do you have any idea for this? Thanks in advance and thanks to Timo for the great work! - alessandro.

2 5

[Dovecot] Dovecot failing to start
by dovecot＠corwyn.net 23 Jun '09

23 Jun '09

So I rebooted my mail server, and now dovecot fails to start with: Stopping Dovecot Imap: [FAILED] Starting Dovecot Imap: Fatal: listen(::, 143) failed: Address already in use [FAILED] [root@agencymail postfix]# dovecot -n # 1.1.8: /etc/dovecot.conf # OS: Linux 2.6.18-92.el5 i686 Red Hat Enterprise Linux Server release 5.2 (Tikanga) ext3 ssl_cert_file: /etc/httpd/certs/agencymail_example_com.crt ssl_key_file: /etc/httpd/certs/agencymail.example.com.key.no.password login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login login_max_processes_count: 256 mail_uid: 1015 mail_gid: 105 mail_location: maildir:/var/spool/mail/%d/%n/Maildir mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugins(default): acl quota imap_quota expire trash mail_plugins(imap): acl quota imap_quota expire trash mail_plugins(pop3): expire quota mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail outlook-idle imap_client_workarounds(imap): delay-newmail outlook-idle imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh dict_db_config: /etc/dovecot-db.conf auth default: mechanisms: plain login passdb: driver: sql args: /etc/dovecot-sql.conf userdb: driver: passwd userdb: driver: sql args: /etc/dovecot-sql.conf userdb: driver: static socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vuser group: vuser plugin: quota: maildir quota_rule: *:storage=102400000 quota_rule2: Trash:storage=100M acl: vfile:/etc/dovecot/acls trash: /etc/dovecot-trash.conf expire: Trash 14 Trash/* 14 Spam 14 expire_dict: proxy::expire dict: expire: mysql:/etc/dovecot-dict-expire.conf Rick Steeves http://www.sinister.net "The more I learn, it seems, the less I know." Frazz

2 2

[Dovecot] Problem migration from Courier-Imap to Dovecot
by Jose Luis Marin Perez 23 Jun '09

23 Jun '09

Dear friends, My intention is to migrate from Courier-Imap Dovecot 4.4.1 to 1.1.16, the problem is that I've noticed that when creating folders using the Courier does not create the file courierimapsubscribed therefore I doubt if this will bring me problems trying to perform the migration script by courier-dovecot-migrate.pl drwx------ 8 vpopmail vchkpw 4096 Jun 18 16:38 . drwx------ 3 vpopmail vchkpw 4096 Jun 18 09:32 .. drwx------ 2 vpopmail vchkpw 4096 Jun 18 16:36 courierimapkeywords -rw-r--r-- 1 vpopmail vchkpw 265566 Jun 18 16:36 courierimapuiddb drwx------ 2 vpopmail vchkpw 593920 Jun 16 10:05 cur drwx------ 2 vpopmail vchkpw 4096 Jun 18 09:32 new drwx------ 6 vpopmail vchkpw 4096 Jun 18 16:38 .Personal drwx------ 6 vpopmail vchkpw 4096 Jun 18 16:38 .RPV drwx------ 2 vpopmail vchkpw 4096 Jun 18 16:41 tmp Please could help me with this problem because I do not have much experience in this type of migration. Thanks Jose Luis _________________________________________________________________ Discover the new Windows Vista http://search.msn.com/results.aspx?q=windows+vista&mkt=en-US&form=QBRE

2 10

[Dovecot] CRAM-MD5 authentication but plain-md5 password storage.
by Richard 22 Jun '09

22 Jun '09

Hi all, Got a question on configuring dovecot, I'm still new at this so I might be doing this all wrong. I want dovecot to authenticate the mail client using CRAM-MD5 so I've setup the config in dovecot.conf: auth default { mechanisms = cram-md5 passdb sql { # Path for SQL configuration file, see doc/dovecot-sql-example.conf args = /etc/dovecot/dovecot-sql.conf } <snipped> } In my dovecot-sql.conf I've setup the password scheme to be: default_pass_scheme = MD5 Somehow this does not work, the error I see in the logfile is: auth-worker(default): password(info(a)richard5.tld,127.0.0.1): Requested CRAM-MD5 scheme, but we have only MD5 Is there a way to get this working or does this feature only works with passwords stored in plain text ? Thanks! Richard

2 3

[Dovecot] dedup in dovecot?
by Roy Sigurd Karlsbakk 22 Jun '09

22 Jun '09

Hi all Deduplicating data is not really a new thing, but quite efficient in mail systems where an email with an nMB attachment may be sent to multiple recipients. This might call for deduplicating data. Is there a way to do this, or is it far off? If I understand the system correctly, usually an MTA is calling dovecot on every single message, meaning the message itself won't necessarily be a duplicate in terms of headers (BCCs and so on). Would it be possible to dedup the content in terms of using separate files for the header and content and then deduping this with hard or symbolic links? Sorry if this is an old question, but I couldn't find anything about it. roy -- Roy Sigurd Karlsbakk (+47) 97542685 roy(a)karlsbakk.net http://blogg.karlsbakk.net/ -- I all pedagogikk er det essensielt at pensum presenteres intelligibelt. Det er et elementært imperativ for alle pedagoger å unngå eksessiv anvendelse av idiomer med fremmed opprinnelse. I de fleste tilfeller eksisterer adekvate og relevante synonymer på norsk.

3 3

[Dovecot] Dovecot v1.2 share user Maildir problems with %%h
by Steffen Kaiser 22 Jun '09

22 Jun '09

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, I'm using Dovecot v1.2 9133:f65112bd90b3 with attached config and try to share user Maildirs. The ACLs are working. However the %%h gives me head aches, well, the location in general: I've copied the default mail_location and changed its CONTROL and INDEX settings: namespace shared { ... location = maildir:%%h/Maildir:CONTROL=/var/cache/dovecot/%i/control/shared/%%u:INDEX=/var/cache/dovecot/%i/index/shared/%%u } Now the first wows are that: a) IMAP insists to connect to $install_prefix/var/run/dovecot/auth-master instead of /var/run/dovecot/auth-master used by deliver. My workaround was to symlink /var/run/dovecot/ to $install_prefix/var/run/dovecot/ b) This socket needs to be r/w for every user, which is a security risk as mentioned in the conf and the default permission is 0600. For deliver I changed the socket attr to permission 0660 and group=mail; for making %%h work I added mail_access_groups=mail c) The user's mailbox is not found still, because: 2009-06-17 15:04:57 auth(default): Info: master in: USER 1 testusr/INBOX service=internal 2009-06-17 15:04:57 auth(default): Info: auth(?): Invalid username: testusr/INBOX 2009-06-17 15:04:57 auth(default): Info: userdb(?): Username contains disallowed character: 0x2f 2009-06-17 15:04:57 auth(default): Info: master out: NOTFOUND 1 The imap process passes the mailbox to the authentificator, too. Also, it changes the '.' to '/', although rawlog has: select "shared.testusr.INBOX" If I allow "/" as userchar, I get: 2009-06-17 15:43:00 auth(default): Info: ldap(testusr/INBOX): Unknown user 2009-06-17 15:43:00 auth(default): Info: master out: NOTFOUND 1 It reallt requests the data of user "testusr/INBOX". d) If I use location = maildir:/home/%%u/Maildir: instead of %%h/Maildir, things work _except_ that some user's %%h != /home/%%u . ============== Basically I have yet another problem with location in the user-share namespace: Because one can override the default mail_location for each user, I did so for some users. Some of them even do not have the Maildir. That leads to the problem, that I need one shared namespace for each location template. There had been a suggestion of a special user-shared namespace a while back. How about to add the base location in the shared-mailboxes.db? So instead of "1" the value is the base of the shared location, e.g. maildir:/local/testuser or maildir:/home/user/Maildir..., and some %%? token takes the string from there. Because the path is known from the db now, the other problems mentioned above do no longer apply. Bye, - -- Steffen Kaiser -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iQEVAwUBSjj/63WSIuGy1ktrAQLliQf9E/fh9BK+5eeHfiJBwfD1kGfP7AYc4CwE Kj6Snkq/eG05F7VM5TyANDZVNFpGY0WsNkmQHutx3OSfh+gVe2gxNljk7KdISMpC 7+PS1Rsnz+0iqq6ueCbs7LGNQCgZyD9Ne14XTzRymJJElw7MfHh7A6+Zhul+CzTL 4D7owW+vcyOVBMY9G2e978MkzXXWQ0zDBHamjeFm4idx4Bl1sbMOuqpWHCse+sP8 XET58VXOMI1LBsrdgoobXRGojLFxZe7r77lSrTkUprFa3ljOsYIIxOEk6mskELue SAftwNlqbkHMAwZQ0G0rlD6vBdyw7B3sN48yFoLEd/cw1SyttVrCdA== =vC9k -----END PGP SIGNATURE-----

2 5

Re: [Dovecot] How do I get my mail from fetchmail into dovecot
by Michael Steinbeck-Reeves 22 Jun '09

22 Jun '09

> Message: 3 > Date: Wed, 29 Apr 2009 16:53:49 +0300 > From: Odhiambo ????? <odhiambo(a)gmail.com> > Subject: Re: [Dovecot] How do I get my mail from fetchmail into > dovecot? > To: Dovecot Mailing List <dovecot(a)dovecot.org> > Message-ID: > <991123400904290653g205c603m2e4b511486a69b52(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > On Wed, Apr 29, 2009 at 4:46 PM, Michael Steinbeck-Reeves < > michael(a)steinbeck-reeves.uk.com> wrote: > > > I have dovecot (with squirrel mail etc.) running without any problems > > but cannot understand how to get e-mail from a pop server into dovecot. > > I have fetchmail configured to pick up the mail from the pop3 server but > > don't understand how to get it from there into my dovecot mbox > > > Where does fetchmail put the e-mails? > Point dovecot there with "mail_location =..." then use your favorite MuA to > access the e-mail. That is the problem, fetchmail just forwards it to port 25 (I think) and I need to work out what to put between fetchmail and dovecot in order to get the mail into the correct folders... And I am just going around in circles on this at the moment. Any hint would be appreciated! Thanks, Michael

6 6

[Dovecot] POP3 -ERR Authentication failed.
by Tariq Ismail Dalvi 22 Jun '09

22 Jun '09

Hello guys I am having problem of pop3 with my mail server I am using postfix-2.3.3 and Dovecot v1.0.7 when i telnet localhost or xyz.net i get following output [root@dalvis ~]# telnet mail.xyz.net 110 Trying 192.168.12.14... Connected to mail.xyz.net (192.168.12.14). Escape character is '^]'. +OK Dovecot ready. user johne(a)xyz.net +OK pass 768tidzx -ERR Authentication failed. Connection closed by foreign host. and my maillog shows Jun 21 19:25:20 localhost dovecot: pop3-login: Aborted login: user=<johne(a)xyz.net>, method=PLAIN, rip=::ffff:192.168.12.14, lip=::ffff:192.168.12.14, secured my dovecot.conf is as follow:- # Remove pop3 things if you don't want them protocols = imap imaps pop3 pop3s # It's nice to have separate log files for Dovecot. You could do this # by changing syslog configuration also, but this is easier. log_path = /var/log/dovecot.log info_log_path = /var/log/dovecot-info.log # Disable SSL for now. ssl_disable = yes disable_plaintext_auth = no # We're using Maildir format mail_location = maildir:~/Maildir # If you're using POP3, you'll need this: pop3_uidl_format = %08Xu%08Xv # Optimizations: dotlock_use_excl=yes maildir_copy_with_hardlinks=yes # Authentication configuration: auth_verbose = yes auth default { mechanisms = plain passdb passwd-file { args = /etc/dovecot/passwd } userdb static { args = uid=vmail gid=vmail home=/var/mail/vmail/%d/%u } } I shall highly appreciate if anyone shall have a look at it and let me know what i am doing wrong. Thank you Best regards. Supports Team Leader tariq(a)dalvis.net tariq(a)unitedinfotechs.net tariqdalvi(a)gmail.com Mobile : 9769681727 Tel : 22 26319389

3 2

[Dovecot] exceeds the global size limit
by Pawel Eljasz 22 Jun '09

22 Jun '09

hi all, I cannot come up if anything sensible? I get this message when I'm sending and quota plugins are disabled, no fs quotas? ... ??? cheers

2 2

[Dovecot] ldap , quotes, upgrade from dovecot-1.0.14 (q2.0)
by razor razor 22 Jun '09

22 Jun '09

hello list help me please - i am trying to fix quotas about 2 days :( i was using 1.0.14+ldap as userdb/passwd+lda+exim, and after upgrading to last release my quotas goes away so > pkg_info | grep dove dovecot-1.1.16 Secure and compact IMAP and POP3 servers dovecot-sieve-1.1.6 A Sieve plugin for the Dovecot 'deliver' LDA dovecot.conf ... protocol imap { listen = *:143 ssl_listen = *:993 mail_plugin_dir = /usr/local/lib/dovecot/imap mail_plugins = quota imap_quota login_executable = /usr/local/libexec/dovecot/imap-login login_greeting_capability = yes imap_client_workarounds = delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep } ... protocol lda { postmaster_address = postmaster at lg.informjust.ua # mail_plugins = cmusieve quota mail_plugin_dir = /usr/local/lib/dovecot/lda mail_plugins = quota ... auth default { mechanisms = plain socket listen { master { path = /var/run/dovecot/auth-master mode = 0700 user = mailnull group = mail } } passdb ldap { args = /usr/local/etc/dovecot-ldap.conf } userdb prefetch { } userdb ldap { args = /usr/local/etc/dovecot-ldap.conf } user = mailnull } plugin { #########quota = maildir:storage=20240 quota = maildir:User quota quota_rule = maildir:storage=500000K ####quota_rule = *:bytes=500000K ####quota_rule = maildir:storage=50240K #####new for 1.1 ver quota_overide = *:storage=20M } ============================ dovecot-ldap.conf ... ldap_version = 3 ... #WAS IN 1.0.14 VER #for deliver #user_attrs = uid,,,homeDirectory=home,uidNumber=uid,gidNumber=gid,boxQuota=quota=dirsize:storage,status user_attrs = homeDirectory=home,uidNumber=uid,gidNumber=gid,boxQuota=quote_rule=maildir:storage=%$K,status user_filter = (&(objectClass=posixAccount)(uid=%u)) pass_attrs = uid=user,,,homeDirectory=userdb_home,uidNumber=userdb_uid,gidNumber=userdb_gid,boxQuota=userdb_quota=maildir:storage=%$K,userPassword=password,status=userdb_status pass_filter = (&(objectClass=posixAccount)(uid=%u)) ================= plan is: 1. if there is a quota in ldap (boxQuota) - we use it 2. if not - quota_rule = maildir:storage=500000K but in real world i have : in my box maildirsize : 512000000S <----------- not 300 mb from my ldap 188854660 1623 1245 1 but in dovecot.log: dovecot: Jun 16 11:00:03 Info: auth(default): ldap(XXXXXXXX,10.2.29.1): pass search: base=cn=XX,dc=XX,dc=lg scope=subtree filter=(&(objectClass=posixAccount)(uid=XXXXXXXX)) fields=uid,homeDirectory,uidNumber,gidNumber,boxQuota,userPassword,status dovecot: Jun 16 11:00:03 Info: auth(default): ldap(XXXXXXXX,10.2.29.1): result: uid(user)=XXXXXXXX uidNumber(userdb_uid)=26 g idNumber(userdb_gid)=6 homeDirectory(userdb_home)=/nonexistent status(userdb_status)=True userPassword(password)=irfaxbr boxQuota(userdb_quota=maildir:storage=%$K)=maildir:storage=50000K <---- CORRECT!! dovecot: Jun 16 11:00:03 Info: auth(default): client out: OK 1 user=XXXXXXXX dovecot: Jun 16 11:00:03 Info: auth(default): master in: REQUEST 219 96373 1 dovecot: Jun 16 11:00:03 Info: auth(default): prefetch(XXXXXXXX,10.2.29.1): success dovecot: Jun 16 11:00:03 Info: auth(default): master out: USER 219 perevdvs uid=26 gid=6 home=/nonexistent status=True quota=maildir:storage=50000K dovecot: Jun 16 11:00:03 Info: imap-login: Login: user=<XXXXXXXX>, method=PLAIN, rip=10.2.29.1, lip=10.2.29.1, secured dovecot: Jun 16 11:00:03 Info: IMAP(perevdvs): Connection closed bytes=50/96360 and in dovecot-delivery.log: deliver(vrog): Jun 16 13:08:08 Info: Loading modules from directory: /usr/local/lib/dovecot/lda deliver(vrog): Jun 16 13:08:08 Info: Module loaded: /usr/local/lib/dovecot/lda/lib10_quota_plugin.so deliver(vrog): Jun 16 13:08:08 Info: auth input: uid=26 deliver(vrog): Jun 16 13:08:08 Info: auth input: gid=6 deliver(vrog): Jun 16 13:08:08 Info: auth input: home=/nonexistent deliver(vrog): Jun 16 13:08:08 Info: auth input: status=True deliver(vrog): Jun 16 13:08:08 Info: auth input: quote_rule=*:storage=50000K <-----CORRECT deliver(vrog): Jun 16 13:08:08 Info: Home dir not found: /nonexistent deliver(vrog): Jun 16 13:08:08 Info: Quota root: name=User quota backend=maildir args= deliver(vrog): Jun 16 13:08:08 Info: Quota rule: root=User quota mailbox=maildir bytes=512000000 messages=0 <-----NOT CORRECT deliver(vrog): Jun 16 13:08:08 Info: Namespace: type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=ye s deliver(vrog): Jun 16 13:08:08 Info: maildir: data=/XXXX/Maildir deliver(vrog): Jun 16 13:08:08 Info: maildir++: root=/XXXX/Maildir, index=, control=, inbox= /XXX/Maildir what am i doing wrong? -- Using Opera's revolutionary e-mail client: http://www.opera.com/mail/

3 7

[Dovecot] auth_cache multiple passwords ?
by Geoffroy Desvernay 22 Jun '09

22 Jun '09

Hi, First, thanks Timo and Stefan for this great IMAP/Sieve implementation... We are using 1.1.16+cmu_sieve/managesieve additions for now (following releases since ~ 1.0.1). We have a specific problem here with auth-cache: We use direct imap/sieve connection from different clients, using LDAP password: everything is fine. The problem appears with our webmail access using a web-SSO system (jasig's CAS), using one-time-tickets as password for imap connections (checked by pam_cas module for now). For a single webmail connection par login, it work, thanks to cache_key using client's IP. But for multiple use of the same login in the webmail, there are more than one 'password' valid at a time… What may be the 'correct' solution: - patching auth-cache.c (auth_cache_lookup function ?) - writing a different login backend ? - ??? Hope I'm clear enough… -- geoffroy desvernay Ecole Centrale de Marseille

2 4

[Dovecot] dovecot-acl file questions
by Steffen Kaiser 22 Jun '09

22 Jun '09

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, playing around with Dovecot's v1.2 ACLs I wondered about some things about the dovecot-acl files: + They are created within the Maildirs, as described in http://wiki.dovecot.org/ACL. But why? Shouldn't they belong to the CONTROL= directories? So it is more compatible with filesystem quota. + They have 0666 permissions, but all other files (e.g. when I create a new mailbox) have 0660 permissions. Are the permissions selected explicitly to allow "a"-right for other (system) users? + When one removes all rights, the size of the file drops to zero. The wasted space is no great deal; but how much processing is wasted if such file is present? I mean, the log says that the files are opened very regularily. Would it help to remove zero-size files? Regards, - -- Steffen Kaiser -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iQEVAwUBSjdoh3WSIuGy1ktrAQKlfQf/X6jxEKTINNwdiFAYq7XEW78Lgjf7FDNc xK3PnT8Opz+4yCiWxDSlUSJPjdc2csTIimR1ZKDn2hUN54jcfJBt6U6bWKPl6rvB Fyycsnx3ONNiYBaqcIoFG4LWGk+QLnXZaVWdCVil2Pn3LotW2Unxe26d51pvt38Q N8dXyyv1yaCpIBzhgFYyn0J7DZxM8HzWUVZNybXGnwm1u13GPf+g7pMlAcF0wNsQ 6gSrFVmu3tzp5FF+3v5rb7GVMAYyLeKeZkzDBOQetuNCkUrUcY3qqYplwKEHvLe5 70e69zh7epGPw9UiSV/FJm+Q/GStz7T7vl7hdoO+WHeJcDhX/IXFBg== =XTLy -----END PGP SIGNATURE-----

2 2

[Dovecot] Dovecot v1.2 assert() in ACL
by Steffen Kaiser 22 Jun '09

22 Jun '09

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, using Dovecot v1.2 changeset: 9126:b745911012bb ACL config: acl = vfile # To let users LIST mailboxes shared by other users, Dovecot needs a # shared mailbox dictionary. For example: acl_shared_dict = file:/var/cache/dovecot/shared-mailboxes telnet localhost imap 0 login .... 1 getacl Sent * ACL "Sent" "testuser" lrwstipekxacd 1 OK Getacl completed. 2 setacl Sent timo +lrwtsd 2 OK Setacl complete. 3 setacl Sent timo -lrwtsd Aborted (core dumped) cat /var/cache/dovecot/shared-mailboxes shared/shared-boxes/user/timo/testuser 1 === The assert happens when the last right is to remove: setacl I user +lwp setacl I user -l setacl I user -w setacl I user -p Abort === log: Panic: file ../../../src/lib/array.h: line 162 (array_idx_i): assertion failed: (idx * array->element_size < array->buffer->used) Raw backtrace: imap [0x80e9ed0] -> imap(i_syslog_fatal_handler+0x2d) [0x80e9f6d] -> imap [0x80e97da] -> /usr/local/dovecot-1.2.rc5unpatched/lib/dovecot/imap/lib01_acl_plugin.so [0xb7e4ede4] -> /usr/local/dovecot-1.2.rc5unpatched/lib/dovecot/imap/lib01_acl_plugin.so [0xb7e4ee40] -> /usr/local/dovecot-1.2.rc5unpatched/lib/dovecot/imap/lib01_acl_plugin.so [0xb7e50c3b] -> /usr/local/dovecot-1.2.rc5unpatched/lib/dovecot/imap/lib01_acl_plugin.so(acl_object_update+0x18) [0xb7e4de98] -> /usr/local/dovecot-1.2.rc5unpatched/lib/dovecot/imap/lib02_imap_acl_plugin.so [0xb7f951cf] -> imap [0x8063dbc] -> imap [0x8063e6b] -> imap(client_handle_input+0x3f) [0x8063fbf] -> imap(client_input+0x5f) [0x8064b2f] -> imap(io_loop_handler_run+0x110) [0x80f2a10] -> imap(io_loop_run+0x28) [0x80f1ad8] -> imap(main+0x764) [0x806cf34] -> /lib/tls/i686/cmov/libc.so.6(__libc_start_main+0xc8) [0xb7e6eea8] -> imap [0x805cb71] (gdb) bt full #0 0xb7f99410 in ?? () No symbol table info available. #1 0xbfe106ac in ?? () No symbol table info available. #2 0x00000006 in ?? () No symbol table info available. #3 0x000054a6 in ?? () No symbol table info available. #4 0xb7e82811 in raise () from /lib/tls/i686/cmov/libc.so.6 No symbol table info available. #5 0xb7e83fb9 in abort () from /lib/tls/i686/cmov/libc.so.6 No symbol table info available. #6 0x080e9edd in default_fatal_finish (type=<value optimized out>, status=0) at failures.c:160 backtrace = 0x81205e0 "imap [0x80e9ed0] -> imap(i_syslog_fatal_handler+0x2d) [0x80e9f6d] -> imap [0x80e97da] -> /usr/local/dovecot-1.2.rc5unpatched/lib/dovecot/imap/lib01_acl_plugin.so [0xb7e4ede4] -> /usr/local/dovecot-1.2"... #7 0x080e9f6d in i_syslog_fatal_handler (type=LOG_TYPE_PANIC, status=0, fmt=0xb7e55714 "file %s: line %d (%s): assertion failed: (%s)", args=0xbfe10854 "\"Y?") at failures.c:315 No locals. #8 0x080e97da in i_panic ( format=0xb7e55714 "file %s: line %d (%s): assertion failed: (%s)") at failures.c:207 args = 0xbfe10854 "\"Y?" #9 0xb7e4ede4 in modify_right_list (pool=0x8154330, rightsp=0x8154450, modify_rights=0x8120338, modify_mode=ACL_MODIFY_MODE_REMOVE) at ../../../src/lib/array.h:162 old_rights = (const char * const *) 0x8154360 new_rights = (const char * const *) 0xbfe10894 null = 0x0 #10 0xb7e4ee40 in vfile_object_modify_right (aclobj=0x81542d0, idx=0, update=0xbfe10a2c) at acl-backend-vfile.c:940 c1 = 74 c2 = <value optimized out> #11 0xb7e50c3b in acl_backend_vfile_object_update (_aclobj=0x81542d0, update=0xbfe10a2c) at acl-backend-vfile.c:1099 str = <value optimized out> i = <value optimized out> ret = <value optimized out> output = <value optimized out> rights = <value optimized out> aclobj = (struct acl_object_vfile *) 0x0 dotlock = <value optimized out> path = <value optimized out> i = 0 fd = 7 changed = <value optimized out> __PRETTY_FUNCTION__ = "acl_backend_vfile_object_update" #12 0xb7e4de98 in acl_object_update (aclobj=0x81542d0, update=0xbfe10a2c) at acl-api.c:137 No locals. #13 0xb7f951cf in cmd_setacl (cmd=0x8130a10) at imap-acl-plugin.c:574 ns = (struct mail_namespace *) 0x8129988 storage = <value optimized out> box = (struct mailbox *) 0x8154f88 backend = (struct acl_backend *) 0x812e2f0 update = {rights = {id_type = ACL_ID_USER, identifier = 0x8135b18 "timo", rights = 0x8120338, neg_rights = 0x0, global = 0}, modify_mode = ACL_MODIFY_MODE_REMOVE, neg_modify_mode = ACL_MODIFY_MODE_REMOVE} mailbox = 0x8135b10 "Sent" identifier = 0x8135b18 "timo" rights = 0x8135b21 "lrwtsd" error = <value optimized out> negative = false #14 0x08063dbc in client_command_input (cmd=0x8130a10) at client.c:607 client = (struct client *) 0x812f748 command = <value optimized out> __PRETTY_FUNCTION__ = "client_command_input" #15 0x08063e6b in client_command_input (cmd=0x8130a10) at client.c:656 client = (struct client *) 0x812f748 command = (struct command *) 0x54a6 __PRETTY_FUNCTION__ = "client_command_input" #16 0x08063fbf in client_handle_input (client=0x812f748) at client.c:697 _data_stack_cur_id = 3 remove_io = <value optimized out> handled_commands = false __PRETTY_FUNCTION__ = "client_handle_input" #17 0x08064b2f in client_input (client=0x812f748) at client.c:748 cmd = <value optimized out> output = (struct ostream *) 0x813098c bytes = 27 __PRETTY_FUNCTION__ = "client_input" #18 0x080f2a10 in io_loop_handler_run (ioloop=0x8128ac8) at ioloop-epoll.c:208 ctx = <value optimized out> event = (const struct epoll_event *) 0x8128c10 list = (struct io_list *) 0x812f808 io = (struct io_file *) 0x812f7e0 tv = {tv_sec = 1789, tv_usec = 997764} t_id = 2 msecs = <value optimized out> ret = 1 i = 0 j = 0 call = <value optimized out> #19 0x080f1ad8 in io_loop_run (ioloop=0x8128ac8) at ioloop.c:338 No locals. #20 0x0806cf34 in main (argc=Cannot access memory at address 0x54a6 ) at main.c:323 buf = <value optimized out> - -- Steffen Kaiser -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iQEVAwUBSjZLO3WSIuGy1ktrAQIiQQf+OVIEEnHua9i/f282/LLGyo48jQMQjq6b VsxUuS6pwPc6HNq16EUNfWOEA6F1/dItNLW0LbvG4bOFwtGv5HnfrzUkkf0WwZun RrVvuXCD+5vF9pMJMbilhGm4h+js+Ymu9dnl43Y64l+7t7lDMPl/JYhGgTYPFF2g 7AgNfwaRG0G4G6zQrjQr9TdefCpq9esZadQwiYMMTWTZA1krfj4QW2ITTeoKaEIL gOR6wjMWVCw6XTYYoLG9dXXJ989U3yhXEu8aXkjAZjdf6Pb/nSrrTluLDgawK65+ IlIIVD5Nx/sqsVQAZ9dK9WGNdG4i6RK/1MZH80bomJ8Ot+KrhW76oQ== =d3r4 -----END PGP SIGNATURE-----

2 6