- dovecot - dovecot.org

[Dovecot] 2.2.4 + metadata plugin: autoconf failed
by Andreas Schulze 29 Aug '13

29 Aug '13

Hello, I can compile metadata plugin using debian squeeze + wheezy. But build on suse enterprise server 9,10 and 11 failed. The metadata plugin require autoconf-2.65 which i too new. On the other side I can build the dovecot-2.2.4 and pigeonhole-0.4.0 plugin without problems: dovecot require autoconf-2.59 and pigeonhole does not require any specific autoconf version. I asked the authors of the plugin for support but got no response. Maybe somebody could review the plugin. Thanks Andreas -- Andreas Schulze Internetdienste | P252 DATEV eG 90329 Nürnberg | Telefon +49 911 319-0 | Telefax +49 911 319-3196 E-Mail info @datev.de | Internet www.datev.de Sitz: 90429 Nürnberg, Paumgartnerstr. 6-14 | Registergericht Nürnberg, GenReg Nr.70 Vorstand Prof. Dieter Kempf (Vorsitzender) Dipl.-Kfm. Wolfgang Stegmann (stellvertretender Vorsitzender) Dipl.-Kfm. Michael Leistenschneider Dipl.-Kfm. Dr. Robert Mayr Jörg Rabe v. Pappenheim Dipl.-Vw. Eckhard Schwarzer Vorsitzender des Aufsichtsrates: Reinhard Verholen

2 3

Re: [Dovecot] Dovecot Dsync
by Ed W 29 Aug '13

29 Aug '13

On 27/08/2013 09:54, Ben wrote: > On 23/08/2013 13:08, Ed W wrote: >> Hi >> >>> I'm on an Ubuntu LTS release so the dovecot came from their release. >>> I'd prefer to stay that way unless I really have to... >> >> Everyone is entitled to their own opinions, but "IMHO" this kind of >> attitude is a huge detriment to most software projects. I see very >> little reason to take such policies personally... >> >> 1) I use virtualisation (especially lightweight virtualisation such as >> vservers) so that each service is in its own container. Now if I have no >> interest in some container and want to let it rot (ie as per LTS), then >> I can just do so. >> 2) I use a fast moving rolling distro (gentoo in my case, Arch is >> probably a good choice also) so that I have the option to stay up to >> date when I want to >> >> The end result is you can be as up to date as you want, or let things >> rot, as you please. >> >> Unfortunately if you want to use a very old bit of software, then you >> also get to keep all it's bugs... Sorry. >> >> Good luck! Hope this inspires you to try a different route! >> >> Ed W > > Whilst to some degree I appreciate where you're coming from and agree > with you to a certain extent, I would caution that following the > bleeding edge, always running the latest versions is not without risk > or bugs either ! OK, but virtualisation also helps you mitigate this: - I setup my "containers" so that I have at least two mount points, one for the operating system and any data broken out into it's own mount. - This makes it quite simple to duplicate the container and spin up a test version pointing if required at the live data - Now you can run a test upgrade on the test container. If it works either swap them around or upgrade the original Additionally: - My choice of distro (gentoo) makes it fairly simple to build binary packages of the software I'm using. - I then use these binary packages on all my containers, additionally with guided profiles which control which packages and which options we deploy. - It's fairly simple to roll back most packages to the previous binary version if a problem is detected (logging of package changes is built-in) So it's quite low risk to use such a rolling distro in general. Note, I can't speak for other distros, but gentoo "stable" is fairly conservative and shouldn't be a problem for an experienced admin to keep up to date. It has the option to unmask "bleeding edge" packages where necessary and this can be useful to hit specific version numbers of software. It's also pretty trivial to keep a private repo of customised packages (ebuilds) with either personal patches or to pin certain versions of software. (So for example if you run, say, Dovecot with a few custom patches, then it's fairly trivial to drop these patches in a directory and now you can use the package manager to follow stable builds, but your custom patches will be rolled in for you with each update - can be very handy for some requirements) I don't have the same experience with RPM/DEB so I can't say that all the same is easy to do, but the key thing is the use of containers/virtualisation to assist with testing and upgrades. Even worst case you have to do a whole OS upgrade, at least if you can do that in a test container while the live remains running, is a big advantage Good luck Ed W

1 0

Re: [Dovecot] mailbox_list_index, stops showing new mails in mailboxes
by Joseph Tam 29 Aug '13

29 Aug '13

Anton Lundin writes: > I'm using 2.2.4 over imap and ssh/imap, and after a while dovecot > stops noticing new mail in some folders. Its always the same 2-3 > folders of about 30. > ... > This is dovecot 2.2.4, running on Solaris 10 x86_64 to homedirs on zfs, > where procmail is used to deliver mail to mailboxes in mbox-format. What's your procmail recipe for delivering messages? If you're storing it directly to a mbox file, dovecot will never get a chance to see it and update the indices. An example of invoking LDA to store messages :0 Hw * /^From:.*dummy@/ | dovecot-lda -d yourusername -m dummybox # Dump mail into my INBOX using dovecot's LDA :0 w | dovecot-lda -d yourusername Joseph Tam <jtam.home(a)gmail.com>

2 1

[Dovecot] Issues with dovecot-antipsam plugin
by Vijay Rajah 29 Aug '13

29 Aug '13

Hello list, I have a postfix 2.11 with dovecot 2.2.5 instance. I have configured and installed anavisd-new to use Spamassassin. I want to train the filter. For that i choose dovecot's antispam plugin using mailtrain backend. I compiled and installed the latest version of the antispam plugin from http://hg.dovecot.org/dovecot-antispam-plugin/rev/5ebc6aae4d7c The configuration is below. Whenever I receive an email, the LMTP process segfaults. If I comment out the antispam plugin part in the config files, all works good. THis leads me to believe the issue is with antispam plugin, or its configuration. Here is what i see in /var/log/mailllog Aug 28 23:06:31 hostname.tld postfix/qmgr[1437]: 055F6345E: from=< sender(a)example.com>, size=10370, nrcpt=1 (queue active) Aug 28 23:06:31 hostname.tld postfix/smtpd[5512]: disconnect from localhost[127.0.0.1] Aug 28 23:06:31 hostname.tld amavis[5369]: (05369-05) Passed SPAM {RelayedTaggedInbound,Quarantined}, [74.125.82.176]:51219 [74.125.82.176] < sender(a)example.com> -> <email(a)mydomain.tld>, quarantine: spam-J09TFNU33sxa.gz, Queue-ID: 3A8093119, Message-ID: < CAMGVk5vH9YzkNFJ3xnWJ0060vpuf1PPzaCHWx71AmGF_qgJTmg(a)mail.gmail.com>, mail_id: J09TFNU33sxa, Hits: 12.123, size: 9323, queued_as: 055F6345E, dkim_sd=20120113:gmail.com, 606 ms Aug 28 23:06:31 hostname.tld postfix/lmtp[5510]: 3A8093119: to=<email(a)mydomain.tld>, relay=127.0.0.1[127.0.0.1]:10024, delay=1.6, delays=0.94/0/0/0.61, dsn=2.0.0, status=sent (250 2.0.0 from MTA(smtp:[127.0.0.1]:10025): 250 2.0.0 Ok: queued as 055F6345E) Aug 28 23:06:31 hostname.tld postfix/qmgr[1437]: 3A8093119: removed Aug 28 23:06:31 hostname.tld dovecot: lmtp(5514): Connect from local Aug 28 23:06:31 hostname.tld dovecot: lmtp(5514): Fatal: master: service(lmtp): child 5514 killed with signal 11 (core dumps disabled) Aug 28 23:06:31 hostname.tld postfix/lmtp[5513]: 055F6345E: to=<email(a)mydomain.tld>, relay=hostname.tld[/opt/var/postfix/dovecot-lmtp], delay=0.09, delays=0.04/0/0.04/0, dsn=4.4.2, status=deferred (lost connection with hostname.tld[/opt/var/postfix/dovecot-lmtp] while sending end of data -- message may be sent more than once) Can someone help in fixing the issue… -Thanks in advance Vijay ######doveconf -n # 2.2.5: /opt/dovecot/2.2.5/etc/dovecot/dovecot.conf # OS: Linux 2.6.32-358.14.1.el6.x86_64 x86_64 CentOS release 6.4 (Final) ext4 auth_mechanisms = plain login digest-md5 cram-md5 auth_socket_path = /opt/var/dovecot/run/auth-userdb base_dir = /opt/var/dovecot/run/ debug_log_path = /var/log/dovecot-debug.log hostname = mail1(a)rvijay.me mail_debug = yes mail_location = maildir:/opt/mailbox/%d/%n/Maildir mail_plugin_dir = /opt/dovecot/2.2.5/lib/dovecot/ mail_plugins = " virtual quota antispam zlib" managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace inbox { inbox = yes location = mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Junk { auto = subscribe special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Spam { auto = subscribe } mailbox Trash { auto = subscribe special_use = \Trash } prefix = separator = / type = private } passdb { args = /opt/dovecot/2.2.5/etc/dovecot/conf.d/dovecot-sql.conf.ext driver = sql } plugin { antispam_allow_append_to_spam = no antispam_backend = mailtrain antispam_mail_notspam = --ham antispam_mail_sendmail = /opt/dovecot/2.2.5/bin/sa-learn-pipe.sh antispam_mail_sendmail_args = -u vmail antispam_mail_spam = --spam antispam_mail_tmpdir = /tmp antispam_spam = Spam antispam_trash = Trash mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size quota = maildir:User quota quota_grace = 10%% quota_rule = *:storage=1GB quota_rule2 = Trash:storage=+10%% quota_rule3 = Spam:storage=+20%% quota_status_nouser = DUNNO quota_status_overquota = 450 4.2.2 Mailbox is full. Try again later quota_status_success = DUNNO quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u quota_warning3 = -storage=100%% quota-warning below %u sieve = ~/.dovecot.sieve sieve_before = /opt/var/dovecot/sieve/ sieve_dir = ~/sieve sieve_global_dir = /opt/var/dovecot/sieve zlib_save = bz2 zlib_save_level = 9 } protocols = imap lmtp sieve service auth { unix_listener /opt/var/postfix/dovecot-auth { group = postfix mode = 0660 user = postfix } } service imap-login { inet_listener imap { port = 143 } } service lmtp { unix_listener /opt/var/postfix/dovecot-lmtp { group = postfix mode = 0660 user = postfix } } service managesieve-login { inet_listener sieve { port = 4190 } service_count = 10 vsz_limit = 64 M } service managesieve { process_limit = 1024 } service quota-status { client_limit = 1 executable = quota-status -p postfix inet_listener { port = 12340 } } service quota-warning { executable = script /opt/dovecot/2.2.5/etc/dovecot/conf.d/quota-warning.sh user = vmail } shutdown_clients = no ssl_ca = </opt/dovecot/2.2.5/etc/dovecot/ssl/mayca.crt.pem ssl_cert = </opt/dovecot/2.2.5/etc/dovecot/ssl/cert.pem ssl_key = </opt/dovecot/2.2.5/etc/dovecot/ssl/key.key ssl_parameters_regenerate = 30 hours submission_host = 127.0.0.1:587 userdb { driver = prefetch } userdb { args = /opt/dovecot/2.2.5/etc/dovecot/conf.d/dovecot-sql.conf.ext driver = sql } protocol lda { mail_plugins = " virtual quota antispam zlib sieve zlib" } protocol imap { mail_plugins = " virtual quota antispam zlib imap_quota imap_zlib" } protocol lmtp { debug_log_path = /var/log/dovecot-lmtp-debg.log mail_plugins = " virtual quota antispam zlib sieve zlib" }

1 0

[Dovecot] Enforcing server cipher list order
by Phillip Odam 28 Aug '13

28 Aug '13

I noticed a similar/same discussion back on Aug 14th titled force ciphers order for clients. However from that thread I can't find quite what I'm after. From my testing of dovecot 2.1.6, by default it appears to honor the clients cipher list order for SSL/TLS connections. I can't find any documentation on dovecot providing a setting like Apache HTTPDs to either honor the client or server cipher list i.e. SSLHonorCipherOrder. Do newer versions (> 2.1.6) of dovecot either make this configurable or force honoring of the servers cipher list order? Or is the cipher selection a function that openssl performs? The version of openssl in use is 1.0.1e-fips. Thanks Phillip

1 0

Re: [Dovecot] Log successful login plain text password
by Joseph Tam 28 Aug '13

28 Aug '13

Marco Fretz writes: > Maybe you can find a way in this direction > > http://wiki2.dovecot.org/HowTo/ConvertPasswordSchemes I've sync'd a separate password system by process tracing dovecot's auth process and dumping out the arguments of read() calls for some fixed set of descriptors and piping it into password synching script. A bit of a hack, but it works without having to touch dovecot. Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] Bug in dovecot 2.2.5: segfault due to bad alignment
by Andreas F. Borchert 28 Aug '13

28 Aug '13

Take a look at the sources, hmac.h declares struct hmac_context: struct hmac_context { char ctx[HMAC_MAX_CONTEXT_SIZE]; char ctxo[HMAC_MAX_CONTEXT_SIZE]; const struct hash_method *hash; }; If compiled for a 32 bit virtual address space, this has an alignment requirement of 4 due to the hash pointer. In line 171 of auth-token.c, we have following declaration of ctx as a local variable in auth_token_get(): struct hmac_context ctx; This is put on an address with an alignment requirement of 4. In lines 174 and 175 hmac_init is invoked with hash_method_sha1: hmac_init(&ctx, (const unsigned char*)username, strlen(username), &hash_method_sha1); In hmac.c, lines 43 and following, ctx->ctx with an alignment of 4 is passed to meth->init and meth->loop where meth refers to hash_method_sha1: meth->init(ctx->ctx); meth->loop(ctx->ctx, k_ipad, 64); These functions refer now to sha1_init and sha1_loop where the first parameter is expected to be a pointer to struct sha1_ctxt, a data structure which is declared in sha1.h: struct sha1_ctxt { union { uint8_t b8[20]; uint32_t b32[5]; } h; union { uint8_t b8[8]; uint64_t b64[1]; } c; union { uint8_t b8[64]; uint32_t b32[16]; } m; uint8_t count; }; Here we have with b64 one uint64_t which has on a SPARC platform an alignment requirement of 8. In consequence, struct sha1_ctxt has an alignment requirement of 8. With the invocations of meth->init and meth->loop above we pass a pointer to a data structure of alignment 4 to a function expecting a pointer to a data structure of alignment 8. Chances are that the alignment requirement is not met, causing a segmentation violation. This must be solved by declaring struct hmac_context such that is not just big enough but respects also the highest alignment required for one of the hashing data structures. There are several options to do this: * Beginning with C11, you are free to use an alignment specifier, i.e. add _Alignas ( uint64_t ) (see section 6.7.5 in ISO 9899-2011) * GCC supports alignment attributes, i.e. add __attribute__ ((aligned (8))) or whatever is required instead of 8, see http://gcc.gnu.org/onlinedocs/gcc/Variable-Attributes.html * Do not use a local variable for it, allocate the data structure using malloc instead. If you want to see a live crash, here is the relevant output of gdb that debugs ${prefix}/libexec/dovecot/auth. Program received signal SIGSEGV, Segmentation fault. sha1_loop (ctxt=0xffbff63c, input=0xffbff548, len=64) at sha1.c:224 224 sha1.c: No such file or directory. (gdb) where #0 sha1_loop (ctxt=0xffbff63c, input=0xffbff548, len=64) at sha1.c:224 #1 0xff2e218c in hmac_init (ctx=ctx@entry=0xffbff63c, key=key@entry=0x6a698 "borchert", key_len=8, meth=0x555d0 <hash_method_sha1>) at hmac.c:44 #2 0x00023310 in auth_token_get (service=service@entry=0x6a648 "imap", session_pid=0x56071 "26272", username=0x6a698 "borchert", session_id=0x6a650 "AErv6nbk6gB/AAAB") at auth-token.c:174 #3 0x00021708 in userdb_callback (result=USERDB_RESULT_OK, request=0x6a530) at auth-request-handler.c:668 #4 0x0001f144 in auth_request_userdb_callback (result=<optimized out>, result@entry=USERDB_RESULT_OK, request=request@entry=0x6a530) at auth-request.c:1039 #5 0x000312c8 in prefetch_lookup (auth_request=0x6a530, callback=0x1f058 <auth_request_userdb_callback>) at userdb-prefetch.c:40 #6 0x0001f37c in auth_request_lookup_user (request=0x6a530, callback=callback@entry=0x2150c <userdb_callback>) at auth-request.c:1072 #7 0x00022034 in auth_request_handler_master_request ( handler=<optimized out>, master=master@entry=0x6b120, id=1292369921, client_id=1, params=0x55bfc) at auth-request-handler.c:758 #8 0x0001be98 in master_input_request (args=<optimized out>, conn=0x6b120) at auth-master-connection.c:127 #9 auth_master_input_line (line=<optimized out>, conn=0x6b120) at auth-master-connection.c:598 #10 master_input (conn=0x6b120) at auth-master-connection.c:653 #11 0xff2ecca4 in io_loop_call_io (io=io@entry=0x6b398) at ioloop.c:387 #12 0xff2ed604 in io_loop_handler_run (ioloop=ioloop@entry=0x5e5e8) at ioloop-poll.c:211 #13 0xff2ec7a8 in io_loop_run (ioloop=0x5e5e8) at ioloop.c:406 #14 0xff29ad7c in master_service_run (service=0x5e128, callback=0x27b40 <client_connected>) at master-service.c:566 #15 0x0001852c in main (argc=1, argv=0xffbffd54) at main.c:393 (gdb) print ctxt $1 = (struct sha1_ctxt *) 0xffbff63c As you can see, ctxt is on a 4-byte boundary, not on an 8-byte boundary. The crash happens at sha1.c:224 where the 8-byte-alignment is indeed mandatory on a SPARC architecture: ctxt->c.b64[0] += copysiz * 8; The environment is Solaris 10 on SPARCv9. The sources have been compiled using gcc 4.8.0 for 32 bit. Andreas.

2 1

[Dovecot] Dovecot proxy to Microsoft Exchange 2013
by Ricardo Machini Barbosa 28 Aug '13

28 Aug '13

Hello, I am trying to do a proxy with dovecot to IMAP backend server that are using Microsoft Exchange 2013. I already did this with Microsoft Exchange 2007 and Microsoft Exchange 2010 and it works perfectly! But with Microsoft Exchange 2013 I can not perform LOGIN. The error log message is: /imap-login: Error: proxy(user(a)domain.com.br): Login for exchange2013.domain.com.br:143 timed out in state=4 (after 30 secs, local=x.x.x.x:59640)/ My troubleshoot was: - tcpdump on dovecot server side: I can see the commands sent/received by Microsoft Exchange. But no the "OK LOGIN" response. /* OK The Microsoft Exchange IMAP4 service in xxxx is ready.// //C CAPABILITY// //L LOGIN "user(a)domain.com.br" "123456"// //* CAPABILITY IMAP4 IMAP4rev1 AUTH=PLAIN STARTTLS UIDPLUS CHILDREN IDLE NAMESPACE LITERAL+// //C OK CAPABILITY completed./ - tcpdump with telnet login on dovecot server side: Works fine. /* OK The Microsoft Exchange IMAP4 service in xxxx is ready.// //a login "user(a)domain.com.br" "123456"// //a OK LOGIN completed.// //a logout// //* BYE Microsoft Exchange Server 2013 IMAP4 server signing off.// //a OK LOGOUT completed./ - Log verbose on Microsoft Exchange 2013. Look like that Microsoft Exchange did not receive the login command. Someone already tried do this with Microsoft Exchange 2013 ? See bellow some information about my dovecot configuration: /# 2.2.2: dovecot.conf// //# OS: Linux 2.6.32-358.2.1.el6.centos.plus.x86_64 x86_64 CentOS release 6.4 (Final)// // //base_dir = /var/run/dovecot/// //disable_plaintext_auth = no// //listen = x.x.x.x// //mbox_write_locks = fcntl// //passdb {// // args = /etc/dovecot/dovecot-ldap.conf.ext// // driver = ldap// //}// // //protocols = imap pop3// //service imap-login {// // inet_listener imap {// // port = 143// // }// // inet_listener imaps {// // port = 993// // ssl = yes// // }// // process_min_avail = 4// // service_count = 0// // vsz_limit = 512 M// //}// //service pop3-login {// // inet_listener pop3 {// // port = 110// // }// // inet_listener pop3s {// // port = 995// // ssl = yes// // }// // process_min_avail = 4// // service_count = 0// // vsz_limit = 512 M// //}// //ssl_cert = </etc/dovecot/certificate/chained.crt// //ssl_key = </etc/dovecot/certificate/cert.key// //userdb {// // driver = prefetch// //}// // ///etc/dovecot/dovecot-ldap.conf.ext// //hosts = x.x.x.x// //dn = cn=admin,o=email// //dnpass = xxxxxxx// //ldap_version = 3// //base = o=email// //scope=subtree// //pass_filter = mail=%u// //pass_attrs = uid=user,=password=,=proxy=y,mailHost=host,=nopassword=y/ Thanks, Ricardo Machini

4 7

[Dovecot] Disable PAM username change?
by George 28 Aug '13

28 Aug '13

Hi! I have a problem involving Samba4, exim4, fetchmail, Dovecot and PAM... I am using Dovecot 2.1.7 on Debian Wheezy. I have setup a "maildrop" machine, which fetches mail from an external POP3 server for multiple accounts using fetchmail, delivers to local users mailboxes through exim4 and then serves them on the intranet via IMAP with Dovecot. This works great with local unix users, but I am having some trouble to configure it to work with Samba4 AD users (Samba 4.0.9 running as a DC on the same machine). Basically, I have configured PAM with winbind and it works fine (AD users can SSH the machine for example). Dovecot also authenticates properly via PAM, but the problem is that the username gets changed in the process (PAM returrns the "username" as "DOMAIN\username"): Aug 21 22:50:22 dc2 dovecot: auth-worker(5179): Debug: auth(foo,127.0.0.1): username changed foo -> DOMAIN\foo Aug 21 22:50:22 dc2 dovecot: auth: Debug: auth(foo,127.0.0.1,<0bBfg3/kpQB/AAAB>): username changed foo -> DOMAIN\foo Aug 21 22:50:22 dc2 dovecot: auth: Debug: client out: OK#0111#011user=DOMAIN\foo So the actual problem is that exim4 is delivering the mail to, for example, "/var/mail/foo" but Dovecot is looking for the mailbox on "/var/mail/DOMAIN\foo", even if the username given in the IMAP session is just "foo". The wiki mentions<http://wiki2.dovecot.org/PasswordDatabase/PAM>that "a PAM module can change the username". Can this be avoided? I need either: * Exim to deliver the mail to the user mailbox, *including* the domain part (out of scope of this list, but information is welcome), or * Dovecot to fetch the mail *not* using the domain part as part of the username variable. As a quick and dirty workaround, I hardcoded the domain part in the exim delivery path (something like "/var/mail/DOMAIN\\$local_part"), but this is far from optimal since I cannot use both unix users and AD users, I cannot use dovecot_delivery LDA transport, etc. As a bottom line, I also posted this to the Samba list because I believe this could also be solved if winbind just always returned the username without the domain when queried (conf option not working, probable bug) Ideas are welcome!! Best regards, Jorge

1 1

[Dovecot] Install of Dovecot 2.2.5 on Solaris 10/Openssl version 0.9.7d 17 Mar 2004
by Haney, Donald 28 Aug '13

28 Aug '13

Greetings! I am attempting to install Dovecot 2.2.5 on Solaris 10 Sparc hardware with openssl version 0.9.7d 17 Mar 2004. I have created a dovecot user and a dove null user, assigned them their own login directories specifying the ksh shell and assigned them to their own groups. I have run the configure command successfully and am having trouble with the make. At first, I received the problem listed below: /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/lib -I../../src/lib-test -DMODULE_DIR=\""/usr/local/lib/dovecot"\" -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -fno-builtin-strftime -I/usr/sfw/include -MT iostream-openssl-context.lo -MD -MP -MF .deps/iostream-openssl-context.Tpo -c -o iostream-openssl-context.lo iostream-openssl-context.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/lib -I../../src/lib-test -DMODULE_DIR=\"/usr/local/lib/dovecot\" -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -fno-builtin-strftime -I/usr/sfw/include -MT iostream-openssl-context.lo -MD -MP -MF .deps/iostream-openssl-context.Tpo -c iostream-openssl-context.c -fPIC -DPIC -o .libs/iostream-openssl-context.o iostream-openssl-context.c: In function `ssl_proxy_ctx_set_crypto_params': iostream-openssl-context.c:451: error: `SSL_OP_SINGLE_ECDH_USE' undeclared (first use in this function) iostream-openssl-context.c:451: error: (Each undeclared identifier is reported only once iostream-openssl-context.c:451: error: for each function it appears in.) I followed directions found in http://hg.dovecot.org/dovecot-2.2/rev/27ebd9552471 to resolve this problem (I believe). I am now seeing the following error: test-http-server.c: In function `main': test-http-server.c:122: error: size of array `type name' is negative *** Error code 1 make: Fatal error: Command failed for target `test-http-server.o' Current working directory /export/home/hanedo00/dovecot-2.2.5/src/lib-http *** Error code 1 The following command caused the error: fail= failcom='exit 1'; \ for f in x $MAKEFLAGS; do \ case $f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ I have not had any luck thus far finding the solution for this error against test-http-server.o. Any assistance would be appreciated. Thanks, Don Haney This message and any attachments are solely for the use of intended recipients. The information contained herein may include trade secrets, protected health or personal information, privileged or otherwise confidential information. Unauthorized review, forwarding, printing, copying, distributing, or using such information is strictly prohibited and may be unlawful. If you are not an intended recipient, you are hereby notified that you received this email in error, and that any review, dissemination, distribution or copying of this email and any attachment is strictly prohibited. If you have received this email in error, please contact the sender and delete the message and any attachment from your system. Thank you for your cooperation

2 1