- dovecot - dovecot.org

[Dovecot] Shared namespace
by Daniel L. Miller 07 May '12

07 May '12

I'm not sure what's triggered it - I THINK it has something to do with a force-resync, but not sure. I'm no longer viewing my full list of shared mailboxes. I used to have a number of users shown - they had all had their ACL's set individually and were shown in the list. "doveadm acl debug" shows they SHOULD be shown - at least I think so, as the output for the mailboxes that DO appear is identical for those that don't. Where should I look for breakage? -- Daniel

1 0

Re: [Dovecot] mdbox packing
by Daniel L. Miller 07 May '12

07 May '12

On 5/6/2012 8:09 PM, Daniel L. Miller wrote: > On 4/30/2012 5:23 PM, Timo Sirainen wrote: >> On Mon, 2012-04-30 at 12:43 -0700, Daniel L. Miller wrote: >>> Is there a way to manually force an mdbox storage to be rebuilt into >>> new >>> files? Particularly files of the maximum size? >> You could do it with dsync. >> >> > dsync seems to do a marvelous job - new question.? > > Given a mailbox with a larger number of older mails - assuming any new > mails will have later dates - will the new mail storage files be > identical? I'm probably not saying the right - let me try this: > > 1. "dsync backup mdbox" (with appropriate args) is run for a given user. > 2. "dsync mirror mdbox" is done just to catch up. > 3. Old mailstore moved off. > 4. New mailstore moved to active location. > > I'm sure there's a safer way to do the above - but I've got a > low-traffic site and I can just shut down mail service altogether for > a few minutes if I want during this. > > Now - repeat the above four steps. Will mail files m.1 through > m.(n-1) be identical to the last run? Is this a valid packing > strategy prior to performing an rsync type backup - assuming no > changes are being made to the archived mails between pack runs? Given the above, and SIS - if the backup is performed in the same spool, i.e. original is /var/mail/domain/user, backup is /var/mail/domain/user-new - will this result in any problems with SIS? If after the pack and rename operation, the old mail tree is simply deleted - will that leave SIS files unreferenced if the user later deletes the messages from their active store? -- Daniel

1 0

[Dovecot] mdbox packing
by Daniel L. Miller 07 May '12

07 May '12

Is there a way to manually force an mdbox storage to be rebuilt into new files? Particularly files of the maximum size? -- Daniel

3 3

[Dovecot] Authentication process holding open filehandles
by George Barnett 07 May '12

07 May '12

Hi, We're using dovecot to provide pop3 for a number of mailboxes. The setup is pretty simple: Each user / domain has a mailstore in /data/mailstore/<domain>/<user>/Maildir (backed by NFS). Passwords are in simple passwd-file format in the top level domain directory eg: # cat /data/mailstore/foo.com/.passwd user:{plain}password The passdb setup looks like this. passdb { args = username_format=%n /data/mailstore/%d/.passwd driver = passwd-file } The problem we're having is that when we want to remove a domain from the system and we go to rm -rf /data/mailstore/<domain>/ we are unable to because the auth process is still holding onto the file handles for the password file. Can somebody suggest an alternative pattern that I could use for storing password files? Ideally, we'd avoid one large file to prevent locking issues and would also keep the passwd-file setup since it's simple. It would be possible to have the password files in a separate dir, but over time I'm guessing that would lead to nfs turds? Easy to clean up I suppose, but maybe there's a simpler solution I'm missing? George

2 1

[Dovecot] smtp -auth with using clear text password
by Agnello George 06 May '12

06 May '12

Hi I am setting up a mailserver .. where clients need to authenticate to the mail server . The mta i am using is postfix . It is possible to use a file like this : ---------------------------------- cat /etc/postfix/dovecote_passwd agnello:123456 --------------------------------- where user is agnello and password is 123456 If you can please send me some reference links thanks a ton -- Regards Agnello D'souza

5 9

Re: [Dovecot] IMAP STARTTLS Problem
by Patrick Ben Koetter 06 May '12

06 May '12

* markus(a)opsys.de <markus(a)opsys.de>: > Am 05.05.2012 22:44, schrieb Patrick Ben Koetter: > >* Markus Fritz <markus.fritz(a)opsys.de>: > >>Am 05.05.2012 21:06, schrieb Markus Fritz: > >Assuming your server cert is located in > >/etc/ssl/certs/ca-certificates.crt try > >this on your server: > > > >openssl s_client -starttls imap -CAfile > >/etc/ssl/certs/ca-certificates.crt -connect localhost:143 > > > >Use "2 logout" to get out of the session. > > > >If it works, try the same from your client host. > > > >Does it work both times? > > yes: > > Verify return code: 0 (ok) > --- > . OK Capability completed. > > it works. But I cannot login with Thunderbird. I imported the cert > in Thunderbird, too. IIRC it is not enough to import the cert. You also need to set a policy i.e. allow the cert to be used for e-mail. p@rick -- state of mind () http://www.state-of-mind.de Franziskanerstraße 15 Telefon +49 89 3090 4664 81669 München Telefax +49 89 3090 4666 Amtsgericht München Partnerschaftsregister PR 563

1 0

[Dovecot] HG 3d8a25a4394d Patch breaks UserDB Lookups
by Thomas Leuxner 06 May '12

06 May '12

Patch http://hg.dovecot.org/dovecot-2.1/rev/3d8a25a4394d breaks auth May 5 09:01:52 spectre dovecot: lmtp(24442): Connect from local May 5 09:01:52 spectre dovecot: lmtp(24442): Error: userdb lookup(tlx(a)leuxner.net): Disconnected unexpectedly May 5 09:01:52 spectre dovecot: auth: Fatal: master: service(auth): child 24443 killed with signal 11 (core not dumped) May 5 09:01:52 spectre dovecot: lmtp(24442): Disconnect from local: Client quit (in reset) Regards Thomas

2 2

[Dovecot] IMAP STARTTLS Problem
by Markus Fritz 05 May '12

05 May '12

Hello, I have this problem: May 5 21:02:35 opsys dovecot: imap-login: Disconnected (no auth attempts): rip=84.150.52.31, lip=78.46.216.126 Connecting via Thunderbird to STARTTLS won't work, but with a website from the same server it works for tls://opsys.de. So why is the port closed for external ip's? IPTABLES entry for imap is this: fail2ban-dovecot-pop3imap tcp -- anywhere anywhere multiport dports pop3,pop3s,imap2,imaps Key files are correct TLS is working from localhost. System is Debian squeeze -- Markus Fritz Administration opsys.de

3 4

[Dovecot] Corrupted mdbox file
by Daniel L. Miller 05 May '12

05 May '12

With an error like this: doveadm(dmiller(a)amfes.com): Error: Corrupted dbox file /var/mail/amfes.com/dmiller/mdbox/storage/m.20 (around offset=74408): Unexpected EOF while reading metadata header What can be done? -- Daniel

2 1

[Dovecot] Dovecot/doveadm crash
by Daniel L. Miller 05 May '12

05 May '12

Having a problem with a mailbox. I've been trying to rebuild - but doveadm force-resync crashes. This is mdbox with sis. doveadm purge -u dmiller(a)amfes.com doveadm(dmiller(a)amfes.com): Panic: file istream.c: line 466 (i_stream_grow_buffer): assertion failed: (stream->max_buffer_size > 0) doveadm(dmiller(a)amfes.com): Error: Raw backtrace: /usr/local/lib/dovecot/libdovecot.so.0(+0x4167a) [0x7fb73465467a] -> /usr/local/lib/dovecot/libdovecot.so.0(default_fatal_handler+0x32) [0x7fb734654762] -> /usr/local/lib/dovecot/libdovecot.so.0(i_fatal+0) [0x7fb73462c2a0] -> /usr/local/lib/dovecot/libdovecot.so.0(+0x4949b) [0x7fb73465c49b] -> /usr/local/lib/dovecot/libdovecot.so.0(i_stream_get_buffer_space+0x82) [0x7fb73465c522] -> /usr/local/lib/dovecot/libdovecot.so.0(+0x4b1c8) [0x7fb73465e1c8] -> /usr/local/lib/dovecot/libdovecot.so.0(i_stream_read+0x69) [0x7fb73465bb69] -> /usr/local/lib/dovecot/libdovecot.so.0(i_stream_read_next_line+0x1d) [0x7fb73465c04d] -> /usr/local/lib/dovecot/libdovecot-storage.so.0(mdbox_purge+0x921) [0x7fb7348d7d71] -> doveadm() [0x40e1e6] -> doveadm() [0x40e018] -> doveadm() [0x40ea83] -> doveadm(doveadm_mail_try_run+0x141) [0x40eef1] -> doveadm(main+0x3c1) [0x415911] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xff) [0x7fb73429deff] -> doveadm() [0x40de39] -- Daniel

2 2