- dovecot - dovecot.org

[Dovecot] I'm confused about my namespace parms
by Steve Campbell 18 Feb '12

18 Feb '12

Hi, I'm new to the list and to dovecot. I'm having a strange situation that provides no errors, so I'm having a little problem diagnosing what's going on. I've been running a Centos 3 mail server with sendmail for our company for quite a few years. I finally got approval for new servers this year and put Centos 6.2 on it. I'm sticking with sendmail, but that's not important. Up to this point, I've got all working fairly well. I've found that if I configure dovecot to use the mixed format (pop and imap INBOX in /var/spool/mail, Imap folders in /home/user/mail, two namespaces) as in the examples for "namespace", most works fine. Anyone who has used imap previously on our old system and work as if nothing has changed. Anyone who has never used Imap before can't seem to access the server using our webmail app (Horde/Imp). Dovecot is providing both pop and imap. An account that is set up from a normal mail client as imap has no problems as well. Sendmail is set up to create a new user in the /var/spool/mail folder. When I moved from the old server to the new server, I copied /home and /var/spool/mail to the new server - in other words, I kept the same scheme. There are no errors in the maillog, and it indicates that the user is getting logged in and out, but the return to Horde is that the user entered the wrong name or password. I'm thinking that this is probably due to how dovecot is trying to look for the imap folders, but the lack or any errors makes it a little difficult to diagnose. I'm fairly certain that what was installed on the old server was UW-Imap and was provided by the imap-2002 rpm. I tried using the examples for UW-Imap compatability but that didn't work at all. I haven't been able to figure out what's different about the old imap folder contents and what's missing in the newly created imap folders to allow Horde to access this account. I'll look at the Horde config to see if anything is there, but I'm cautious about changing anything that might break the current users' ability. Most of the accounts are set up as POP with the ability to see what's left on the server using Horde, webmail, and IMAP. Any help in tracing this down would really help. I think my biggest problem is I don't understand the "namespace" parameter as well as I should. So there it is. It seems I've got at least 3 areas to concentrate on. Steve Campbell ------------------------------------------------- This mail sent through IMP: http://horde.org/imp/

2 2

[Dovecot] Move templates args to override_fields setting?
by Ralf Hildebrandt 18 Feb '12

18 Feb '12

After upgrading from 2.0.x to 2.1.x I get a lot of: Feb 18 18:18:12 postamt dovecot: auth-worker(31443): Warning: userdb passwd: Move templates args to override_fields setting OK, it's just a warning, but how do I fix that in a 2.0.x compatible way? The only place userdb is used is in this contaxt: # for user*masteruser logins passdb { args = /usr/local/etc/dovecot/dovecot.masteruser driver = passwd-file master = yes } # User via passwd userdb { driver = passwd args = cache_key=%u } -- Ralf Hildebrandt Geschäftsbereich IT | Abteilung Netzwerk Charité - Universitätsmedizin Berlin Campus Benjamin Franklin Hindenburgdamm 30 | D-12203 Berlin Tel. +49 30 450 570 155 | Fax: +49 30 450 570 962 ralf.hildebrandt(a)charite.de | http://www.charite.de

2 2

[Dovecot] expunging
by Micah Anderson 18 Feb '12

18 Feb '12

I am having trouble scaling some regular dovecot cleanup operations on our servers. On a daily basis, I'm wanting to do this on each server, which contains its own isolated set of user storage: /usr/bin/doveadm expunge -A mailbox Trash* savedbefore 21d /usr/bin/doveadm expunge -A mailbox Spam savedbefore 7d /usr/bin/doveadm expunge -A mailbox Sent savedbefore 120d but these are a very expensive operations. For example, just doing the Spam expunge takes 30 minutes (or more, depending on the load) of heavy disk operations, on each machine it is run on. There are approximately 20k users on each machine. It seems like it does not use the iterate query, but rather it looks into the database at the expires table and rather it iterates over every user mentioned there. This is a problem because I've got multiple dovecot machines with different sets of users on them, using the same table, so that means that its doing stat() calls on each system for every user mentioned there and failing to find the user on the filesystem (because the user is on another system). In these cases it spits out an error: doveadm(user): Info: User no longer exists, skipping For users that do exist on this system, it seems to do something on the order of 15 stat() calls, at minimum. What are some things I can do to make this less of an expensive process? If I had a shared storage system that each machine used, this would cut down on the resource waste because I'd only need to run the query once, but unfortuntely, that isn't how these systems were designed. thanks for any ideas, tips etc. micah

3 3

[Dovecot] Quota warnings and LMTP
by joshua＠hybrid.pl 18 Feb '12

18 Feb '12

Hello, I have dovecot 2.0 configured with virtual users in MySQL, SMTP is handled by exim which uses dovecot LMTP transport. I'd like to test quota warning messages, but in wiki2 there is only an example for delivering it with dovecot-lda. I tried several ways of using lmtp binary, but without success. How to replace this: cat << EOF | /usr/local/libexec/dovecot/dovecot-lda -d $USER -o "plugin/quota=maildir:User quota:noenforcing" From: postmaster(a)domain.com Subject: quota warning Your mailbox is now $PERCENT% full. EOF with lmtp? Greetings, -- Jacek Osiecki

3 2

[Dovecot] Order of operations in Dovecot
by Eric Gregory 18 Feb '12

18 Feb '12

Hi, I'm working on an IMAP client and had a question about the order in which commands are responded to in Dovecot. In other IMAP servers I've looked at, when you issue two commands simultaneously (i.e. pipelining) it looks something like this: a fetch something b fetch something else * 1 FETCH (result) a OK FETCH completed * 1 FETCH (result) b OK FETCH completed This works well because it's clear which results are associated with which tag; the 'a' fetch results immediately precede the a's OK response, and likewise the 'b' fetch results immediately precede the b's OK response. But in Dovecot (version 2.0.13) the results of the two simultaneous commands are ordered like this: a fetch something b fetch something else * 1 FETCH (result) * 1 FETCH (result) a OK FETCH completed b OK FETCH completed This makes associating the results of the fetch commands quite a bit more difficult, since it's not entirely clear which results are paired with which tag. My question is this: is this Dovecot's intended behavior, or did I find a bug? I realize the IMAP spec is really vague about this. If this is the intended behavior, is there any advice for clients on how to determine which results are associated with which command? Thanks! - Eric

2 1

[Dovecot] Upgraded to 2.1 - ulimit error
by Marc Perkel 17 Feb '12

17 Feb '12

Not sure what this means: Warning: fd limit (ulimit -n) is lower than required under max. load (4096 < 20000), because of service auth { client_limit } What do I need to do?

1 1

[Dovecot] Dovecot 2.1.0 packages for CentOS 6 / RHEL6
by Morten Stevens 17 Feb '12

17 Feb '12

Hi, First, Timo, Thank you for Dovecot 2.1.0. I've built Dovecot 2.1.0 RPMs including Dovecot-Pigeonhole 0.3.0 for RHEL6, CentOS 6 and Scientific Linux 6. If anyone is interested in testing these RPMs: http://oss.imt-systems.com/mstevens/el6/dovecot/2.1.0/ Feedback would be appreciated. After some testing, we will use these RPMs on our IMAP servers. Best regards, Morten

2 2

[Dovecot] Dovecot lda parameters
by Клименко Николай 17 Feb '12

17 Feb '12

hi all I have the following scheme. Postfix with virtual users with dovecot LDA. AD as database. Dovecot and Postfix get the following Idap attributes from AD: sAMAccountName, mail and mail_alias. The problem is that I can’t make dovecot lda move the user’s mail to the folder with the name from sAMAccountName attribute, as mail always moves to folder with e-mail address name. Is it posible to delivery e-mail to folder with name from ldap attributes sAMAccountName? --

1 0

[Dovecot] Favorable mention in Linux Productivity Magazine
by Steve Litt 16 Feb '12

16 Feb '12

Hi all, The latest Linux Productivity Magazine, http://www.troubleshooters.com/lpm/201202/201202.htm, discusses the positive role Dovecot played in my migration away from Kmail. This is currently topical as Kmail is in the midst to transforming to Kmail2, which requires an Akonadi database and is not popular. I hope you enjoy the magazine. SteveT Steve Litt Troubleshooters.Com

1 0

[Dovecot] How to delete old mails in dovecot 1.2.x
by Przemysław Orzechowski 16 Feb '12

16 Feb '12

Hi I have already read this page but there is no info on how to delete old mails in dovecot 1.2 http://wiki1.dovecot.org/QuestionsAndAnswers#How_can_I_create_a_cron_or_som… I need to delete old mails from over 100 mailboxes with average of 10k mails / mailbox Is there a way to delete old mails (by message date not file creation date) as with doveadm in dovecot 2 ? Thanks in advance bellow my dovecot -n (not sure if it is neccessary or not so just in case) # 1.2.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-33-server x86_64 Ubuntu 10.04.3 LTS log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s ssl_cert_file: /etc/ssl/makolab/star_makolab_pl.crt ssl_key_file: /etc/ssl/makolab/star_makolab_pl.key disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_privileged_group: mail mail_location: maildir:~/Maildir mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 auth default: passdb: driver: pam userdb: driver: passwd plugin: quota: fs:Limit uzytkownika:user quota2: fs:Limit domeny:group

3 4