- dovecot - dovecot.org

[Dovecot] automated mailbox trimming?
by Monique Y. Mudama 02 Feb '11

02 Feb '11

Hello all, If this is answered in the wiki, I apologize. Please point me to it and I'll be on my way ... This may be more of a MailDir-generic question, except that as I understand it there's some wiggle room in the naming of the message files. I've just switched from an mbox-based mail system to Dovecot with MailDir. With mbox, I used logrotate to keep some of my mailboxes (spam, sent, stuff like that) down to only the most recent messages. What's the best way to go about mailbox trimming with dovecot's implementation of maildir? I was thinking of writing a script to simply move or delete old files, but would I mess up dovecot's expectations for directory/file structure that way? My mail directories are in my user's home directory. I'm fine with writing a script or application (time permitting, of course), but before I do so, is there already a solution out there? In case it's relevant: $ dovecot --version 1.2.15 $ dovecot -n # 1.2.15: /etc/dovecot/dovecot.conf # OS: Linux 2.6.37 x86_64 Debian 6.0 log_timestamp: %Y-%m-%d %H:%M:%S ssl: required login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login mail_privileged_group: mail mbox_write_locks: fcntl dotlock auth default: passdb: driver: passwd-file args: /etc/dovecot/passwords userdb: driver: passwd userdb: driver: passwd-file args: /etc/dovecot/passwords

4 3

[Dovecot] Plugin delete-to-trash on Dovecot 2.0
by Antonio Perez-Aranda 01 Feb '11

01 Feb '11

There are some body using delete-to-trash on any version of Dovecot 2.0? -- Antonio Pérez-Aranda Alcaide aperezaranda(a)yaco.es Yaco Sistemas S.L. http://www.yaco.es/ C/ Rioja 5, 41001 Sevilla Teléfono +34 954 50 00 57 Fax +34 954 50 09 29

4 8

[Dovecot] Cannot authenticate with new Red Hat/Fedora SHA512
by John Cooper 01 Feb '11

01 Feb '11

RHEL6 and Fedora 14 use an improved password algorithm of SHA512 on a brand new install of the OS (:$6$ in shadow file). cat /etc/shadow user1:$6$<salt>$<password>:15006:0:99999:7::: I cannot get dovecot to authenticate. I've search for a way to change the default algorithm in dovecot and found you should use CRYPT but I don't know what to put in the /etc/dovecot/dovecot.conf or /etc/dovecot/conf.d/* Can this be done or do you need to use an alternate password file with MD5? Thanks, John.

3 5

[Dovecot] cgroup support
by Andreas Pelme 01 Feb '11

01 Feb '11

Hi, I am setting up a system that enforces cgroup restrictions when a user logs in via SSH, and for all the services that are run by a particular user. I am also running dovecot to give users IMAP/POP access to their mailboxes. However, to be part of a cgroup, PIDs must be explicitly added to the cgroup tasks file. So for now, all my processes are run with resource restrictions, except for Dovecot processes. It would be really cool if dovecots child/worker processes could be added the a cgroup in addition to the usual setuid/chroot protections that already exists. Adding a process to a cgroup is a matter of writing the PID to the correct cgroup tasks file. If this were implemented as an extra field in userdb, it could be very powerful, and allow for all kinds of resource management/accounting of dovecot processes. This would obviously not be cross-platform, since cgroups are a feature of the Linux kernel. Would that be a problem? Is support for cgroups something that could be considered for dovecot at all? Are there other ways to put dovecot processes in cgroups? I do not really have a patch or a plan for how everything would work out in detail. If this would be useful for dovecot, I would be happy to start hacking on a patch. Cheers Andreas

3 7

[Dovecot] cross compile dovecot with openssl
by kylixboy 01 Feb '11

01 Feb '11

hello everyone: i can configue dovecot with the following: ./configure --build='i686-pc-linux-gnu' --host='arm-openwrt-linux' --with-ssl=openssl --with-storages=maildir i_cv_epoll_works=yes i_cv_inotify_works=yes i_cv_posix_fallocate_works=yes i_cv_signed_size_t=no i_cv_gmtime_max_time_t=32 i_cv_signed_time_t=yes i_cv_mmap_plays_with_write=yes i_cv_fd_passing=yes i_cv_c99_vsnprintf=yes lib_cv_va_copy=yes lib_cv___va_copy=yes lib_cv_va_val_copy=yes CFLAGS="-gdwarf-2 -msoft-float" CFLAGS="-I/sdk-comcerto-openwrt-6.0/staging_dir/target-arm_glibc-2.7/usr/include" LDFLAGS="-L/sdk-comcerto-openwrt-6.0/staging_dir/target-arm_glibc-2.7/usr/lib" And can compile && make the dovecot binary, but except the following warnings and errors: configure: WARNING: openssl/ssl.h: accepted by the compiler, rejected by the preprocessor! configure: WARNING: openssl/ssl.h: proceeding with the compiler's result configure: WARNING: openssl/err.h: accepted by the compiler, rejected by the preprocessor! configure: WARNING: openssl/err.h: proceeding with the compiler's result configure: WARNING: zlib.h: accepted by the compiler, rejected by the preprocessor! configure: WARNING: zlib.h: proceeding with the compiler's result ./configure: line 22927: /sdk-comcerto-openwrt-6.0/staging_dir/toolchain-arm_gcc-4.1.2_glibc-2.7/usr/bin/rpcgen: cannot execute binary file Sorry about that i want to know why the warnings be happened and how to work out that. Best regards.

1 0

[Dovecot] Permissions issues after dovecot reload
by Matt Rude 31 Jan '11

31 Jan '11

Hello, Today while looking at a different issue (one user couldn't retrieve mail; DNS issue) I set 'mail_debug=yes' then ran `dovecot reload` on our mail server. After running the reload, dovecot started complaning about permission issues with the dict file, and preceded to try to kill it's self. The self reload didn't seem to work, and since this is a production system, I was forced to restart the dovecot service. After the restart of the service, everything seemed to go back to normal. Dovecot is currently working as expected, no other permission errors in the logs. Dovecot Version: 2.0.9 (3582271a897e) running on Fedora 14 running with a mySQL setup including dict tables (quota, expire). The virtual user's mail has a local user and group id of 1000. Below is the expert from the log: Jan 25 18:00:01 milly postfix/smtpd[9418]: connect from odin.example.com[174.143.172.159] Jan 25 18:00:01 milly postfix/smtpd[9418]: disconnect from odin.example.com[174.143.172.159] Jan 25 18:01:05 milly dovecot: dict: mysql: Connected to localhost (postfix) Jan 25 18:01:17 milly dovecot: master: Warning: SIGHUP received - reloading configuration Jan 25 18:01:27 milly postfix/anvil[6470]: statistics: max connection rate 2/60s for (submission:192.168.10.12) at Jan 25 17:57:19 Jan 25 18:01:27 milly postfix/anvil[6470]: statistics: max connection count 1 for (smtp:168.100.1.4) at Jan 25 17:52:25 Jan 25 18:01:27 milly postfix/anvil[6470]: statistics: max cache size 3 at Jan 25 17:55:23 Jan 25 18:01:59 milly dovecot: imap(matt): Error: net_connect_unix(/usr/var/run/dovecot/dict) failed: Permission denied (euid=1000(virtualmail) egid=1000(virtualmail) missing +r perm: /usr/var/run/dovecot/dict, euid is not dir owner) Jan 25 18:01:59 milly dovecot: imap(matt): Error: Internal quota calculation error Jan 25 18:02:02 milly dovecot: imap(matt): Error: net_connect_unix(/usr/var/run/dovecot/dict) failed: Permission denied (euid=1000(virtualmail) egid=1000(virtualmail) missing +r perm: /usr/var/run/dovecot/dict, euid is not dir owner) Jan 25 18:02:02 milly dovecot: imap(matt): Error: Internal quota calculation error Jan 25 18:02:14 milly dovecot: imap(matt): Error: net_connect_unix(/usr/var/run/dovecot/dict) failed: Permission denied (euid=1000(virtualmail) egid=1000(virtualmail) missing +r perm: /usr/var/run/dovecot/dict, euid is not dir owner) Jan 25 18:02:14 milly dovecot: imap(matt): Error: net_connect_unix(/usr/var/run/dovecot/dict) failed: Permission denied (euid=1000(virtualmail) egid=1000(virtualmail) missing +r perm: /usr/var/run/dovecot/dict, euid is not dir owner) Jan 25 18:02:14 milly dovecot: imap(matt): Error: net_connect_unix(/usr/var/run/dovecot/dict) failed: Permission denied (euid=1000(virtualmail) egid=1000(virtualmail) missing +r perm: /usr/var/run/dovecot/dict, euid is not dir owner) Jan 25 18:02:14 milly dovecot: imap(matt): Error: net_connect_unix(/usr/var/run/dovecot/dict) failed: Permission denied (euid=1000(virtualmail) egid=1000(virtualmail) missing +r perm: /usr/var/run/dovecot/dict, euid is not dir owner) Jan 25 18:02:17 milly dovecot: master: Warning: Processes aren't dying after reload, sending SIGTERM. Jan 25 18:02:17 milly dovecot: imap: Warning: Killed with signal 15 (by pid=5922 uid=0 code=kill) Jan 25 18:02:17 milly dovecot: imap: Server shutting down. bytes=73545/124557 Jan 25 18:02:17 milly dovecot: imap: Warning: Killed with signal 15 (by pid=5922 uid=0 code=kill) Jan 25 18:02:17 milly dovecot: imap: Server shutting down. bytes=9609/127653 Jan 25 18:02:17 milly dovecot: imap: Warning: Killed with signal 15 (by pid=5922 uid=0 code=kill) Jan 25 18:02:17 milly dovecot: imap: Warning: Killed with signal 15 (by pid=5922 uid=0 code=kill) Jan 25 18:02:17 milly dovecot: imap: Server shutting down. bytes=2836/8394 Jan 25 18:02:17 milly dovecot: imap: Server shutting down. bytes=9335/53756 Jan 25 18:02:17 milly dovecot: imap: Warning: Killed with signal 15 (by pid=5922 uid=0 code=kill) Jan 25 18:02:17 milly dovecot: imap: Server shutting down. bytes=2449/6084 Jan 25 18:02:17 milly dovecot: imap: Warning: Killed with signal 15 (by pid=5922 uid=0 code=kill) Jan 25 18:02:17 milly dovecot: imap: Server shutting down. bytes=1000/2416 Jan 25 18:02:17 milly dovecot: imap: Warning: Killed with signal 15 (by pid=5922 uid=0 code=kill) Jan 25 18:02:17 milly dovecot: imap: Warning: Killed with signal 15 (by pid=5922 uid=0 code=kill) Jan 25 18:02:17 milly dovecot: imap: Server shutting down. bytes=52000/12276 Jan 25 18:02:17 milly dovecot: imap: Server shutting down. bytes=3796/86595 Jan 25 18:02:17 milly dovecot: imap: Warning: Killed with signal 15 (by pid=5922 uid=0 code=kill) Jan 25 18:02:17 milly dovecot: imap: Server shutting down. bytes=557/2333 Jan 25 18:02:17 milly dovecot: imap: Warning: Killed with signal 15 (by pid=5922 uid=0 code=kill) Jan 25 18:02:17 milly dovecot: imap: Server shutting down. bytes=2003/6833 Jan 25 18:02:17 milly dovecot: imap: Warning: Killed with signal 15 (by pid=5922 uid=0 code=kill) Jan 25 18:02:17 milly dovecot: imap: Server shutting down. bytes=60624/207831 Jan 25 18:02:17 milly dovecot: imap: Warning: Killed with signal 15 (by pid=5922 uid=0 code=kill) Jan 25 18:02:17 milly dovecot: imap: Server shutting down. bytes=103883/195056 Jan 25 18:02:17 milly dovecot: imap: Warning: Killed with signal 15 (by pid=5922 uid=0 code=kill) Jan 25 18:02:17 milly dovecot: imap: Server shutting down. bytes=68919/371893 Jan 25 18:02:17 milly dovecot: config: Warning: Killed with signal 15 (by pid=5922 uid=0 code=kill) Jan 25 18:02:17 milly dovecot: dict: Warning: Killed with signal 15 (by pid=5922 uid=0 code=kill) ( I manually restarted the dovecot service ) Jan 25 18:03:09 milly dovecot: lda: Debug: Loading modules from directory: /usr/lib/dovecot/ Jan 25 18:03:09 milly dovecot: lda: Debug: Module loaded: /usr/lib/dovecot//lib10_quota_plugin.so Jan 25 18:03:09 milly dovecot: lda: Debug: Module loaded: /usr/lib/dovecot//lib20_expire_plugin.so Jan 25 18:03:09 milly dovecot: lda: Debug: Module loaded: /usr/lib/dovecot//lib90_sieve_plugin.so Jan 25 18:03:09 milly dovecot: auth: mysql: Connected to localhost (postfix) Jan 25 18:03:09 milly dovecot: lda: Debug: auth input: lists maildir=lists uid=1000 gid=1000 home=/var/spool/virtualmailboxes/lists quota_rule=*:storage=4194304 mail=mdbox:/var/spool/virtualmailboxes/lists Jan 25 18:03:09 milly dovecot: lda: Debug: changed username to lists Jan 25 18:03:09 milly dovecot: lda: Debug: Added userdb setting: plugin/maildir=lists Jan 25 18:03:09 milly dovecot: lda: Debug: Added userdb setting: plugin/quota_rule=*:storage=4194304 Jan 25 18:03:09 milly dovecot: lda: Debug: Added userdb setting: mail=mdbox:/var/spool/virtualmailboxes/lists Jan 25 18:03:09 milly dovecot: lda(lists): Debug: Effective uid=1000, gid=1000, home=/var/spool/virtualmailboxes/lists Jan 25 18:03:09 milly dovecot: lda(lists): Debug: Quota root: name=User quota backend=dict args=:proxy::quota Jan 25 18:03:09 milly dovecot: lda(lists): Debug: Quota rule: root=User quota mailbox=* bytes=4294967296 messages=0 Jan 25 18:03:09 milly dovecot: lda(lists): Debug: Quota rule: root=User quota mailbox=Trash bytes=+858993459 (20%) messages=0 Jan 25 18:03:09 milly dovecot: lda(lists): Debug: Quota rule: root=User quota mailbox=Junk bytes=+858993459 (20%) messages=0 Jan 25 18:03:09 milly dovecot: lda(lists): Debug: dict quota: user=lists, uri=proxy::quota, noenforcing=0 Jan 25 18:03:09 milly dovecot: lda(lists): Debug: Namespace : type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes location=mdbox:/var/spool/virtualmailboxes/lists Jan 25 18:03:09 milly dovecot: lda(lists): Debug: fs: root=/var/spool/virtualmailboxes/lists, index=, control=, inbox= Jan 25 18:03:09 milly dovecot: lda(lists): Debug: Namespace : Using permissions from /var/spool/virtualmailboxes/lists: mode=0700 gid=-1 Jan 25 18:03:09 milly dovecot: lda(lists): Debug: Namespace : type=shared, prefix=shared/%u/, sep=/, inbox=no, hidden=no, list=children, subscriptions=no location=maildir:%h/ Jan 25 18:03:09 milly dovecot: lda(lists): Debug: shared: root=/usr/var/run/dovecot, index=, control=, inbox= Jan 25 18:03:09 milly dovecot: lda(lists): Debug: Namespace : type=public, prefix=Public/, sep=/, inbox=no, hidden=no, list=yes, subscriptions=yes location=mdbox:/var/spool/virtualmailboxes//public Jan 25 18:03:09 milly dovecot: lda(lists): Debug: fs: root=/var/spool/virtualmailboxes//public, index=, control=, inbox= Jan 25 18:03:09 milly dovecot: lda(lists): Debug: Namespace Public/: Using permissions from /var/spool/virtualmailboxes//public: mode=0700 gid=-1 Jan 25 18:03:09 milly dovecot: lda(lists): Debug: Quota root: name=User quota backend=dict args=:proxy::quota Jan 25 18:03:09 milly dovecot: lda(lists): Debug: Quota rule: root=User quota mailbox=* bytes=1073741824 messages=100000 Jan 25 18:03:09 milly dovecot: lda(lists): Debug: Quota rule: root=User quota mailbox=Trash bytes=+214748364 (20%) messages=0 Jan 25 18:03:09 milly dovecot: lda(lists): Debug: Quota rule: root=User quota mailbox=Junk bytes=+214748364 (20%) messages=0 Jan 25 18:03:09 milly dovecot: lda(lists): Debug: dict quota: user=lists(a)example.com, uri=proxy::quota, noenforcing=0 Jan 25 18:03:09 milly dovecot: lda(lists): Debug: none: root=, index=, control=, inbox= I can provide my doveconf -n output and any other info you may need. Thanks -Matt

2 2

[Dovecot] disable_plaintext_auth = no ignored by dovecot in Ubuntu 10.04
by David Mattox 31 Jan '11

31 Jan '11

Help!! I have been trying to get Dovecot configured to allow plaintext auth with no success. After some testing with the mail system I discovered the >dovecot -a commant to dump the config file values from the program. Gee, changing the value of disable_plaintext_auth had no effect on what the program reported this value to be! To eliminate possible errors caused by other config file entries I finally restored the /etc/dovecot/dovecot.conf file that was created by installing the package. I then changed the one line to uncomment disable_plaintext_auth and set it equal to no. restart the box and execute dovecot -a The value is still set to the default value of yes... Help! What is happening and how to I get this system to allow plain text auth without TLS? I did also try setting different ports for imap, imaps, pop3, pop3s inside the seperate protocol blocks with no effect. Below you will find a partial of the config file. Below that you will find the output of >dovecot -a and >dovecot -n Thank you in advance for any help with this problem. Dave dave@mail:~$ cat /etc/dovecot/dovecot.conf ## Dovecot configuration file # If you're in a hurry, see http://wiki.dovecot.org/QuickConfiguration # "dovecot -n" command gives a clean output of the changed settings. Use it # instead of copy&pasting this file when posting to the Dovecot mailing list. # '#' character and everything after it is treated as comments. Extra spaces # and tabs are ignored. If you want to use either of these explicitly, put the # value inside quotes, eg.: key = "# char and trailing whitespace " ... #listen = * disable_plaintext_auth = no dave@mail:~$ sudo dovecot -n # 1.2.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-24-generic i686 Ubuntu 10.04.1 LTS log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap pop3 imaps pop3s managesieve ssl_cert_file: /etc/ssl/certs/ssl-mail.pem ssl_key_file: /etc/ssl/private/ssl-mail.key ssl_cipher_list: ALL:!LOW:!SSLv2:ALL:!aNULL:!ADH:!eNULL:!EXP:RC4+RSA:+HIGH:+MEDIUM login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login mail_privileged_group: mail mail_location: maildir:~/Maildir mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve imap_client_workarounds(default): outlook-idle delay-newmail imap_client_workarounds(imap): outlook-idle delay-newmail imap_client_workarounds(pop3): imap_client_workarounds(managesieve): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh pop3_client_workarounds(managesieve): lda: postmaster_address: postmaster mail_plugins: sieve quota_full_tempfail: yes deliver_log_format: msgid=%m: %$ rejection_reason: Your message to <%t> was automatically rejected:%n%r auth default: mechanisms: plain login passdb: driver: pam userdb: driver: passwd socket: type: listen client: path: /var/spool/postfix/private/dovecot-auth mode: 432 user: postfix group: postfix plugin: sieve: ~/.dovecot.sieve sieve_dir: ~/sieve dave@mail:~$ dave@mail:~$ sudo dovecot -a # 1.2.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-24-generic i686 Ubuntu 10.04.1 LTS base_dir: /var/run/dovecot log_path: info_log_path: log_timestamp: %Y-%m-%d %H:%M:%S syslog_facility: mail protocols: imap pop3 imaps pop3s managesieve listen: * ssl_listen: ssl: yes ssl_ca_file: ssl_cert_file: /etc/ssl/certs/ssl-mail.pem ssl_key_file: /etc/ssl/private/ssl-mail.key ssl_key_password: ssl_parameters_regenerate: 168 ssl_cipher_list: ALL:!LOW:!SSLv2:ALL:!aNULL:!ADH:!eNULL:!EXP:RC4+RSA:+HIGH:+MEDIUM ssl_cert_username_field: commonName ssl_verify_client_cert: no disable_plaintext_auth: yes verbose_ssl: no

3 4

[Dovecot] Particular user post-login hang
by Henry C. 31 Jan '11

31 Jan '11

Greets, I'm using dovecot 2.0.9 (also tried rolling back to 2.0.8 which does the same - the output below is from 2.0.8), and this problem is imap specific. The following is a recurring problem with a specific user - as far as we can tell, other users are working just fine (there are thousands); but I bet there are others. In a nutshell: User authenticates OK, then the imap process hangs. It's almost as if something in the user's inbox is causing the problem, since if I clear all emails (and cache), then things work fine. The user will then receive emails OK for some random period (maybe a few days) and be able to read/write OK via imap, and the problem will re-occur. The debug output shows nothing untoward: auth: Debug: auth client connected (pid=20774) auth: Debug: client in: AUTH 1 PLAIN service=imap secured lip=127.0.0.1 rip=127.0.0.1 lport=144 rport=41641 resp=<hidden> auth: Debug: shadow(username,127.0.0.1): lookup auth: Debug: client out: OK 1 user=username auth: Debug: master in: REQUEST 1938161665 20774 1 238230058d076a9af1cd4405244d33ba auth: Debug: passwd(username,127.0.0.1): lookup auth: Debug: master out: USER 1938161665 username system_groups_user=username uid=17286 gid=300 home=/home/mailusers/username imap-login: Info: Login: user=<username>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=20775, secured imap(username): Debug: Effective uid=17286, gid=300, home=/home/mailusers/username imap(username): Debug: fs: root=/home/mailusers/username/., index=, control=, inbox=/var/mail/username Rawlog looks good: IN: A002 CAPABILITY A003 NAMESPACE C64 EXAMINE "" A002 STATUS "INBOX" (MESSAGES UNSEEN RECENT) A003 SELECT "INBOX" A004 EXPUNGE A005 SELECT "INBOX" A006 EXPUNGE A007 UID SEARCH UNSEEN A008 UID FETCH 2533:2588 (FLAGS BODY.PEEK[HEADER.FIELDS (RECEIVED)]) OUT: ... * 15 FETCH (UID 2536 FLAGS () BODY[HEADER.FIELDS (RECEIVED)] {944} ... * 67 FETCH (UID 2588 FLAGS () BODY[HEADER.FIELDS (RECEIVED)] {945} ... A008 OK Fetch completed. It's at this point that nothing happens for a short while and the user gets a blank screen. I tried running it through gdb (ie, "Talk IMAP Directly" - as described at http://dovecot.org/bugreport.html) but that fails with "Cannot find user-level thread for LWP nnnn: generic error", which is probably specific to our old box/installation. strace hangs with: Process 6574 attached - interrupt to quit gettimeofday({1296472202, 318955}, NULL) = 0 gettimeofday({1296472202, 319073}, NULL) = 0 epoll_wait(0x8, 0x806c4f8, 0x6, 0x1b708d gdb backtrace gives: 0xb7e2bff9 in epoll_wait () from /lib/tls/libc.so.6 (gdb) bt full #0 0xb7e2bff9 in epoll_wait () from /lib/tls/libc.so.6 No symbol table info available. #1 0xb7eed4eb in io_loop_handler_run (ioloop=0x806c390) at ioloop-epoll.c:181 ctx = (struct ioloop_handler_context *) 0x806c4b8 list = (struct io_list *) 0x8082850 io = (struct io_file *) 0x806c4f8 tv = {tv_sec = 1696, tv_usec = 510098} msecs = 8 ret = -1 i = 0 j = -1208929836 call = 8 #2 0xb7eec249 in io_loop_run (ioloop=0x806c390) at ioloop.c:404 No locals. #3 0xb7ed8e15 in master_service_run (service=0x806c2e0, callback=0xfffffffc) at master-service.c:484 No locals. #4 0x0805ee75 in main (argc=1, argv=0x806c1d8) at main.c:375 set_roots = {0x8061d80, 0x0} service_flags = 6 storage_service_flags = MAIL_STORAGE_SERVICE_FLAG_DISALLOW_ROOT postlogin_socket_path = 0x806c2e0 "\220�\006\bp�\006\b\200�\006\b\b" username = 0x0 c = -4 (gdb) lsof shows: COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME imap 6574 username cwd DIR 9,0 4096 30130787 /home2/home/mailusers/username imap 6574 username rtd DIR 3,1 4096 2 / imap 6574 username txt REG 9,0 941700 35836003 /home2/local/libexec/dovecot/imap imap 6574 username mem REG 0,0 0 [heap] (stat: No such file or directory) imap 6574 username mem REG 9,0 109568 30130578 /home2/home/mailusers/username/.imap/INBOX/dovecot.index.cache imap 6574 username mem REG 3,1 41351 13749135 /lib/tls/libnss_files-2.3.5.so imap 6574 username mem REG 3,1 41583 13749137 /lib/tls/libnss_nis-2.3.5.so imap 6574 username mem REG 3,1 92501 13749132 /lib/tls/libnsl-2.3.5.so imap 6574 username mem REG 3,1 35866 13749133 /lib/tls/libnss_compat-2.3.5.so imap 6574 username mem REG 3,1 87827 13749140 /lib/tls/libpthread-2.3.5.so imap 6574 username mem REG 3,1 1366940 13749126 /lib/tls/libc-2.3.5.so imap 6574 username mem REG 3,1 34582 13749142 /lib/tls/librt-2.3.5.so imap 6574 username mem REG 3,1 13120 13749129 /lib/tls/libdl-2.3.5.so imap 6574 username mem REG 9,0 17380 6897709 /home2/home/mailusers/username/.imap/INBOX/dovecot.index.log imap 6574 username mem REG 9,0 1980063 35835914 /home2/local/lib/dovecot/libdovecot.so.0.0.0 imap 6574 username mem REG 9,0 4911010 35835915 /home2/local/lib/dovecot/libdovecot-storage.so.0.0.0 imap 6574 username mem REG 3,1 27274 654816 /lib/libsafe.so.2.0.16 imap 6574 username mem REG 3,1 99790 654754 /lib/ld-2.3.5.so imap 6574 username 0w CHR 1,3 327760 /dev/null imap 6574 username 1w CHR 1,3 327760 /dev/null imap 6574 username 2w FIFO 0,5 1548069248 pipe imap 6574 username 3w FIFO 0,5 1548064788 pipe imap 6574 username 4r FIFO 0,5 1548414049 pipe imap 6574 username 5w FIFO 0,5 1548069260 pipe imap 6574 username 6u unix 0xe481b180 1548069218 /usr/local/var/run/dovecot/login/imap imap 6574 username 7w FIFO 0,5 1548414049 pipe imap 6574 username 8u 0000 0,6 0 9 unknown inode type imap 6574 username 9u REG 9,0 17380 6897709 /home2/home/mailusers/username/.imap/INBOX/dovecot.index.log imap 6574 username 10u IPv4 1548412828 TCP localhost:144->localhost:38067 (ESTABLISHED) imap 6574 username 11u REG 9,0 2632 30130623 /home2/home/mailusers/username/.imap/INBOX/dovecot.index imap 6574 username 12u REG 9,0 109568 30130578 /home2/home/mailusers/username/.imap/INBOX/dovecot.index.cache imap 6574 username 13u REG 9,0 10472498 9257043 /home2/var/spool/mail/username Any pointers? Thanks Henry ---------------------- CONFIG: ------- auth_debug = yes auth_mechanisms = plain login default_login_user = nobody first_valid_uid = 200 listen = * log_path = /var/log/dovecot.log mail_debug = yes mail_location = mbox:~/.:INBOX=/var/mail/%u passdb { driver = shadow } protocols = imap service imap-login { inet_listener imap { port = 144 # 143 is for imap proxy } } ssl = no userdb { driver = passwd }

2 4

[Dovecot] dovecot can't see mail that is there
by Joachim Ferreira 31 Jan '11

31 Jan '11

Hi list, I've yet to figure out what's the issue with my installation, why I can't see the mails that are definitely there. I've updated with last package: dovecot-2.0.9-1.fc14.x86_64.rpm and performed the following test: 1) send a simple 2 lines test mail from "root" to user "testdvct" with alpine 2) login under "testdvct" + run alpine + list (only list, not read) the mail: +------------------------------ Alpine Output --------------------------------------+ | ALPINE 2.02(1266) MESSAGE INDEX Folder: INBOX Message 1 of 1 NEW | | | | + N 1 17:43 root (881) | +--------------------------------------------------------------------------- --------+ so it tells me I've got one mail from root 3) I issue the command: "strace -o strace-dovecot.txt -p 2218" where 2218 is the /usr/sbin/dovecot PID 4) telnet into pop3: # telnet localhost pop3 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. +OK Dovecot ready. user testdvct +OK pass <my-password> +OK Logged in. list +OK 0 messages: . quit +OK Logging out. Connection closed by foreign host. 5) kill strace Still no joy! Is there anything else I can do to debug this issue? Thanks, JF ------------------------------------------- There are not dovect entries in the syslog ------------------------------------------- # ls -lhR /var/run/dovecot /var/run/dovecot: total 12K srw------- 1 root root 0 Jan 19 17:38 anvil srw------- 1 root root 0 Jan 19 17:38 anvil-auth-penalty srw------- 1 root root 0 Jan 19 17:38 auth-client srw------- 1 dovecot root 0 Jan 19 17:38 auth-login srw------- 1 root root 0 Jan 19 17:38 auth-master srw------- 1 root root 0 Jan 19 17:38 auth-userdb srw------- 1 dovecot root 0 Jan 19 17:38 auth-worker srw------- 1 root root 0 Jan 19 17:38 config srw------- 1 root root 0 Jan 19 17:38 dict srw------- 1 root root 0 Jan 19 17:38 director-admin srw------- 1 root root 0 Jan 19 17:38 director-userdb srw-rw-rw- 1 root root 0 Jan 19 17:38 dns-client srw------- 1 root root 0 Jan 19 17:38 doveadm-server lrwxrwxrwx 1 root root 25 Jan 19 17:38 dovecot.conf -> /etc/dovecot/dovecot.conf drwxr-xr-x 2 root root 4.0K Dec 18 12:30 empty srw-rw-rw- 1 root root 0 Jan 19 17:38 lmtp drwxr-x--- 2 root dovenull 4.0K Jan 19 17:38 login -rw------- 1 root root 5 Jan 19 17:38 master.pid /var/run/dovecot/empty: total 0 /var/run/dovecot/login: total 0 srw-rw-rw- 1 root root 0 Jan 19 17:38 dns-client srw-rw-rw- 1 root root 0 Jan 19 17:38 imap srw-rw-rw- 1 root root 0 Jan 19 17:38 login srw-rw-rw- 1 root root 0 Jan 19 17:38 pop3 srw-rw-rw- 1 root root 0 Jan 19 17:38 ssl-params --------------------------------------------------------- # dovecot -n # 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.35.10-74.fc14.x86_64 x86_64 Fedora release 14 (Laughlin) auth_debug = yes auth_debug_passwords = yes auth_verbose_passwords = plain disable_plaintext_auth = no mail_location = mbox:INBOX=/var/mail/%u mbox_write_locks = fcntl passdb { driver = pam } pop3_client_workarounds = outlook-no-nuls oe-ns-eoh service imap-login { group = dovenull } service pop3-login { group = dovenull } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } -------------------------------------------------------- -----Original Message----- From: dovecot-bounces+joach_ferr=yahoo.co.uk(a)dovecot.org [mailto:dovecot-bounces+joach_ferr=yahoo.co.uk@dovecot.org] On Behalf Of Joachim Ferreira Sent: 06 January 2011 19:46 To: dovecot(a)dovecot.org Subject: [Dovecot] dovecot can't see mail that is there I used to install dovecot on any Fedora fresh installation and I could fetch my internal mail few minutes later. Now I've been struggling for two days and I haven't got my mail working yet. I have Fedora 14 with sendmail. Some application on the same machine send mail to an account on the same machine (hence all is confined to one machine) and I want to retrieve it from a laptop on the same LAN via Outlook. If I login into the account and check the mail with the alpine (ex pine) client, I see that there are 10 mails. When I "telnet localhost pop3" and login into the account, the "list" command says there are 0 mails. Various suggestions found on the internet for slightly different configuration did not help. All the help will be very much appreciated. Thanks, Joachim ++++++++++++++++++++++++++++++++++++++++++++ The output of dovecot -n ------------------------ # dovecot -n # 2.0.8: /etc/dovecot/dovecot.conf # OS: Linux 2.6.35.10-74.fc14.x86_64 x86_64 Fedora release 14 (Laughlin) auth_debug = yes auth_debug_passwords = yes auth_verbose_passwords = plain disable_plaintext_auth = no mail_location = mbox:INBOX=/var/mail/%u mbox_write_locks = fcntl passdb { driver = pam } pop3_client_workarounds = outlook-no-nuls oe-ns-eoh ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } NOTE - I don't use ssl, but disabling ssl + certificate did not change behaviour. THE OUTPUT OF /var/log/maillog ----------------------------------------- Jan 6 19:14:26 BEATLES dovecot: auth: Debug: Loading modules from directory: /usr/lib64/dovecot/auth Jan 6 19:14:26 BEATLES dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libauthdb_ldap.so Jan 6 19:14:26 BEATLES dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libdriver_sqlite.so Jan 6 19:14:26 BEATLES dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libmech_gssapi.so Jan 6 19:14:26 BEATLES dovecot: auth: Debug: pam(joachim,192.168.0.88): lookup service=dovecot Jan 6 19:14:26 BEATLES dovecot: auth: Debug: pam(joachim,192.168.0.88): #1/1 style=1 msg=Password: Jan 6 19:14:26 BEATLES dovecot: auth: Debug: client out: OK#0111#011user=joachim Jan 6 19:14:26 BEATLES dovecot: auth: Debug: master in: REQUEST#0113019243521#01112409#0111#0116f7f83729469c6158f08283ec2e20067 Jan 6 19:14:26 BEATLES dovecot: auth: Debug: passwd(joachim,192.168.0.88): lookup Jan 6 19:14:26 BEATLES dovecot: auth: Debug: master out: USER#0113019243521#011joachim#011system_groups_user=joachim#011uid=500#011gi d=500#011home=/home/joachim Jan 6 19:14:26 BEATLES dovecot: pop3-login: Login: user=<joachim>, method=PLAIN, rip=192.168.0.88, lip=192.168.0.2, mpid=12414 Jan 6 19:14:26 BEATLES dovecot: pop3(joachim): Disconnected: Logged out top=0/0, retr=0/0, del=0/0, size=0

2 2

[Dovecot] Duplicate messages when moving message to inbox
by Ron Garret 31 Jan '11

31 Jan '11

Hello, I am encountering a strange problem but I'm not sure if it's a dovecot problem or a Mac Mail problem. The symptom is that if I move a message from a folder into my inbox the message ends up showing up as a duplicate in Mac Mail. On the server it's still just one message. This ONLY happens when I move a message IN to the inbox. It does not happen when I move a message out of my inbox into a folder, or when I move a message between folders. I can force a sync on Mac Mail and the duplicate is still there. If however I quit Mac Mail and start it up again, the duplicate disappears. I can move one of the duplicated messages out of my inbox into a folder and then back into my inbox repeatedly and end up with (apparently) an arbitrary number of copies of the same message. On the server, though, there is still only one file. Surely I'm not the first person to have encountered this behavior? Does anyone happen to know if this is a dovecot bug or a Mac Mail bug (or, hopefully, a configuration problem)? Thanks, rg

2 1