- dovecot - dovecot.org

[Dovecot] Dovecot deliver LDA problem
by Alex 05 May '10

05 May '10

Hello folks, I was trying to set up Dovecot deliver LDA instead of Postfix default virtual LDA In Postfix main.cf I specified: virtual_transport = dovecot dovecot_destination_recipient_limit = 1 In Postfix master.cf I entered: dovecot unix - n n - - pipe user=mailer flags=DRhu argv=/usr/local/mail/libexec/dovecot/deliver -f ${sender} -d ${recipient} In Dovecot dovecot.conf I have the following entries: passdb sql { args = /etc/dovecot/dovecot-sql.conf } userdb prefetch { } userdb sql { args = /etc/dovecot/dovecot-sql.conf } In Dovecot dovecot-sql.conf I have this: user_query = SELECT maildir as mail FROM dovecot_email_maps WHERE email = '%u' password_query = SELECT user, password, userdb_uid, userdb_gid, userdb_home, userdb_mail FROM dovecot_user_maps WHERE user = '%n' After reloading postfix and restarting dovecot I'm getting this type of warnings in dovecot.err log: May 04 10:43:10 deliver(some_address(a)some_domain.com): Error: userdb lookup: connect(/var/run/dovecot//auth-master) failed: No such file or directory Could somebody please help me to resolve this mistery. What am I missing ether in configuration file or somewhere else? Many thanks in advance, Alex

2 2

[Dovecot] CDB Authentication database
by Luca Corti 04 May '10

04 May '10

Hello, I'd be interested in seeing a CDB based backend for the userdb/passdb lookups. Is anyone working on this? Is there any documentation (other than the wiki Design section and the code itself) on implementing database backends? thanks Luca

5 5

[Dovecot] Dovecot antispam plugin with virtual users
by Philipp 04 May '10

04 May '10

Hi, I'm running dovecot 1.2.11 with the antispam plugin 1.2+20090702-1+b1 installed from the debian repos (squeeze) and dspam 3.9.0+git20100416-1. Unfortunately this doesn't seem to work well with my virtual users, stored on a local openldap server: While sending mail manually to dspam does work, there's some trouble when trying to use the antispam plugin. I tried using both sendmail (exim4 in my case) and configuring antispam_mail_sendmail = /usr/bin/dspam to point to dspam, with similar results: exim: [15042] Failed to get user name for uid 5001 dspam: dspam[18961]: Unable to determine the runtime user both errors are reproducible by running exim/dspam with sudo -u \#5001 with 5001 being the virtual uid used of the user that is logged in through imap. Of course the uid 5001 is invalid for the rest of the system, so it can't run anything, but as far as I can tell the plugin uses this uid to call the respective programs :\ Now I was wondering if it was possible to keep the plugin from using the imap-uid and instead specifying one elsewhere? I guess this would be of fairly great interest for everyone using virtual users, be it ldap or anything else. Or is there a different way to do this? Do I maybe just miss setting a variable somewhere? Philipp

2 1

[Dovecot] dovecot user
by Timo Sirainen 04 May '10

04 May '10

Any thoughts on this: The primary use for "dovecot" user has been for login processes. But people keep misunderstanding this and try to use dovecot for accessing mails. For years I've been wondering about renaming this user to something else like dovelogin, but it never really seemed practical. So now with v2.0 there are a bunch of new processes, and for example anvil and dict are now run as dovecot user by default. But it's not really good that login processes can just go and kill those processes. And even worse, if drop_priv_before_exec=yes they could ptrace these processes. So I think we need two Dovecot users for v2.0: 1. Completely untrusted user for login processes. 2. Slightly more trusted internal Dovecot user. So "dovecot" could be reused for 2. And it would no longer be a mortal sin to use dovecot user for owning mail files. For 1. there would be a new user. I'd use "dovelogin", but apparently tools still don't much like usernames that are longer than 8 characters. Like ps could show numeric uid instead of 9 character long username. So .. any suggestions? "dovlogin" could be one possibility I guess. It would be nice if the name somehow reminded of login processes, but maybe something else could be used too, like: dovenil, dovenull, dovezero, dovenone, dovevoid, doveint, dovedown, dovein, dove0

17 33

[Dovecot] Dovecot SQL user_query
by Alex 04 May '10

04 May '10

Hello folkz, Is it possible to setup in dovecot-sql.conf file to run user_query twice if its first run didn't yield any values. And likewise don't proceed with the second run if the first user_query execution produced the result. I have to query two tables which specify there email messages shall be delivered via Dovecot deliver LDA depending on the incoming email addresses. Please don't question me about this setup. I inherited this mess from the previous Network Admin. First query should be ran like this: user_query = SELECT concat('maildir:/data/mail/',maildir) as mail FROM folders WHERE email = '%u' If the first query doesn't yield any result the second shall be ran like this: user_query = SELECT maildir as home FROM users WHERE email = '%u' Please advise if such user_query setup is possible at all. Thanks in advance, Alex

5 4

[Dovecot] exit codes for 'sievec'
by Jerry 04 May '10

04 May '10

As far as I can tell, 'sievec' always exits with '0' whether there is an error or not. If that is correct, I believe it should be modified to exit with some other code if the conversion and writing of the new file are not completed successfully. I have written a few script files and a 'make' file specifically for sievec. The inability to get an accurate exit code is problematic for me. -- Jerry Dovecot.user(a)seibercom.net Disclaimer: off-list followups get on-list replies or get ignored. Please do not ignore the Reply-To header. __________________________________________________________________ Fortune's Fictitious Country Song Title of the Week: "How Can I Miss You if You Won't Go Away?"

2 2

[Dovecot] zlib Plugin Dovecot 2.0 - ostream
by Alex Baule 03 May '10

03 May '10

Hello Everyone... In zlib save mail have it: struct ostream *output; There is a way to get the file descriptor from output used in ostream zlib plugin ? to get in istream is i_stream_get_fd, but don't have o_stream_get_fd......

2 6

[Dovecot] Dovecot Vs Procmail LDA
by Wilberth Pérez 03 May '10

03 May '10

Hi everyone: Anyone knows what are the differences (or advantages and disadvantages) between Dovecot LDA with postfix Vs. Procmail LDA with postfix ? -- -------------------------------------------------------- LCC Wilberth de Jesús Pérez Segura CCSA- Administración de Servicios y Seguridad de las TI Correo: wilberth.perez(a)uady.mx Universidad Autónoma de Yucatán Secretaría General Coordinación Administrativa de Tecnologías de Información RIUADY C-59 x Av. Itzáes (999)923-74-28 Ext. 1117 Mérida, Yucatán, México 2010 --------------------------------------------------------

1 0

[Dovecot] [SUGGESTION] Managesieve: Transparent home dir creation
by Felix Leimbach 03 May '10

03 May '10

Hi all, I'm using dovecot 2.0-beta4's sieve plugin and it works great but here is an idea for improvement: When creating the first sieve script for an account whose home dir does not yet exist then dovecot *does* create that homedir but the sieve client times out. Tried Thunderbird's sieve addon as well as horde's ingo. The log says: dovecot: managesieve-login: Login: user=<me(a)example.com>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured dovecot: managesieve(me(a)example.com): sieve-storage: sieve_storage_verify_dir(/mnt/data/vmail/dovecot-homedirs/example.com/me//s… failed: File exists dovecot: managesieve(me(a)example.com): Fatal: Failed to open Sieve storage. Because the homedir was created (great!) when I retry the same action then all works perfectly well. So why not make that homedir creation transparent so that the clients' first try succeeds instead of the second try? Cheers, Felix

3 3

[Dovecot] Migrating domain with diferent default_pass_scheme
by emiliojoel 03 May '10

03 May '10

Hi I have now my main mail server using dovecot with diferents domains and for user auth using mysql with default_pass_scheme = PLAIN, Now I am migrating a new domain from other server with dovecot using mysql with default_pass_scheme = MD5. My question is: Is possible have a different default_pass_scheme depending of the domain? could I use dovecot with domains using mysql auth with default_pass_scheme = PLAIN and other with default_pass_scheme = MD5? any sugestion? thanks Emilio -- View this message in context: http://old.nabble.com/Migrating-domain-with-diferent-default_pass_scheme-tp… Sent from the Dovecot mailing list archive at Nabble.com.

2 1