- dovecot - dovecot.org

[Dovecot] auth-worker always opens PAM session
by Miguel Di Ciurcio Filho 21 Feb '09

21 Feb '09

I'm using Dovecot 1.1.7 on CentOS 5.2. I've changed my passdb from passwd to pam, it works fine, but I've found this messages on /var/log/secure: dovecot-auth: PAM adding faulty module: /lib64/security/pam_limits.so dovecot-auth: PAM unable to dlopen(/lib64/security/pam_limits.so) dovecot-auth: PAM [error: /lib64/security/pam_limits.so: failed to map segment from shared object: Cannot allocate memory] Latter I realized that my auth_process_size was 64. Changed it to 128 and problem solved. But I suspect that dovecot should not be opening sessions, because there is no session=yes on my passdb configuration. According to the docs: args = dovecot [session=yes] [setcred=yes] [failure_show_msg=yes] [cache_key=<key>] [<service name>] session=yes makes Dovecot open and immediately close PAM session. Some PAM plugins need this to work, such as pam_mkhomedir. I checked the source code in passdb-pam.c: struct pam_passdb_module { struct passdb_module module; const char *service_name, *pam_cache_key; unsigned int pam_setcred:1; unsigned int pam_session:1; unsigned int failure_show_msg:1; }; And this: /* -session for backwards compatibility */ if (strcmp(t_args[i], "-session") == 0 || strcmp(t_args[i], "session=yes") == 0) module->pam_session = TRUE; It seams to me that the session is going to be opened anyway, since pam_session is always TRUE. Regards, Miguel

2 3

[Dovecot] quota and dict quota
by Osvaldo Alvarez Pozo 21 Feb '09

21 Feb '09

Hi I am running dovecot with quota. as show in this part of dovecot.conf . protocols = imap pop3 protocol imap { mail_plugins = quota imap_quota imap_client_workarounds = outlook-idle delay-newmail } protocol pop3 { mail_plugins = quota pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xv } protocol lda { mail_plugins = quota log_path = /var/log/dovecot-deliver.log info_log_path = /var/log/dovecot-deliver.log } Now I want to see the users's use of quota in postfixadmin, wich demende the use of dict quota. That is wath I do not understang. Can I have dict quota and mail_plugins=quota at the same time? How do I do? Thanks

2 5

[Dovecot] Dovecot 1.2.beta1 Backtrace POP3
by Steven King 21 Feb '09

21 Feb '09

I am testing out the new Dovecot 1.2.beta1 software. I am getting reports from people using POP3 that it randomly drops connections. Looking at the log file I see that the POP3 process they were connecting to panics and dumps a Raw bactrace. Below is a copy of the logs (IP addresses striped for security): dovecot: Feb 21 13:10:45 Info: auth(default): passwd-file(janna(a)jantics.com,x.x.x.x): lookup: user=janna(a)jantics.com file=/etc/postfix/passwd dovecot: Feb 21 13:10:45 Info: auth(default): master out: USER 3340 janna(a)jantics.com uid=1005 gid=102 home=/var/mail/vhosts/%d/%n quota=maildir quota_rule=*:storage=100M quota_rule2=Trash:storage=50M dovecot: Feb 21 13:10:45 Panic: POP3(janna(a)jantics.com): Trying to allocate 0 bytes dovecot: Feb 21 13:10:45 Error: POP3(janna(a)jantics.com): Raw backtrace: pop3 [0x80d18fc] -> pop3 [0x80d195a] -> pop3 [0x80d125b] -> pop3 [0x80db683] -> pop3(i_malloc+0x15) [0x80d5ee5] -> pop3(client_create+0x503) [0x805c573] -> pop3(main+0x3ce) [0x805e00e] -> /lib/libc.so.6(__libc_start_main+0xe0) [0xb7e39390] -> pop3 [0x805b7e1] dovecot: Feb 21 13:10:45 Error: child 26895 (pop3) killed with signal 6 dovecot: Feb 21 13:10:45 Info: pop3-login: Login: user=<janna(a)jantics.com>, method=PLAIN, rip=69.54.221.129, lip=x.x.x.x -- Steve King Network Engineer - Liquid Web, Inc. Cisco Certified Network Associate CompTIA Linux+ Certified Professional CompTIA A+ Certified Professional

2 2

[Dovecot] Maildir with INBOX and other folders at same level
by Seth Rhudy 21 Feb '09

21 Feb '09

Hello- I have set up Dovecot before and feel fairly comfortable with it but am having some issues with a new setup and have not been able to find a solution via Google or the list archives. I use offlineiimap to sync an IMAP account with an email provider. After the sync is complete, my ~/Maildir is set up with a folder called INBOX (with cur,new,tmp inside) and all my other folders set up at same level as INBOX (also with cur,new,tmp inside): ~/Maildir INBOX cur new tmp Otherfolder1 cur new tmp Otherfolder2 cur new tmp etc.. This email provider says that they use '/' as the IMAP folder separator so '.' can be used in folder names. Anyway, I am using Dovecot 1.0.15 on Debian Lenny and can't seem to get Dovecot to recognize this folder structure and display it in my MUA. In my dovecot.conf, I have: mail_location = maildir:~/Maildir When I fire up my MUA it connects fine but does not display anything -- the INBOX is empty and the other folders are not there. I have tried various configurations with the namespace private {} section but without success. What am I missing? Thank you in advance for your assistance.

2 2

[Dovecot] Sendmail + Deliver as an LDA probs
by ben 21 Feb '09

21 Feb '09

Hi, I'm having trouble setting up sendmail to be able to use dovecot deliver as an LDA... I don't want to be able to deliver mail locally, everything should go via deliver (virtual user setup)... And i'm confused about all the procmail/lda entry's in different sendmail config files... When using $# deliver -u testuser < testmail <-- he delivers my mail in the correct mailbox as stated in my dovecot passdb file homedir. So deliver is working fine ! ---- I used the dovecot.m4 from wiki.dovecot.org/LDA/sendmail sendmail.mc fragment (only lines affecting Local delivery) : DOMAIN(`blaat')dnl MODIFY_MAILER_FLAGS(`LOL', `-S')dnl FEATURE(`local_procmail')dnl define(`LOL_MAILER_PATH',`/usr/bin/procmail')dnl define(`PROCMAIL_MAILER_PATH',`/usr/bin/procmail')dnl dnl MAILER(`local')dnl MAILER(`smtp')dnl MAILER(`procmail')dnl MAILER(`dovecot')dnl dnl ------ blaat.m4 fragment : define(`LOCAL_MAILER_PATH',`/usr/bin/procmail') define(`PROCMAIL_MAILER_PATH',`/usr/bin/procmail') ------ more /usr/local/src/sendmail-x.x/cf/mailer/dovecot.m4 : ######################*****############## ### DOVECOT Mailer specification ### ##################*****################## Mdovecot, P=/opt/dovecot/libexec/dovecot/deliver, F=DFMPhnu9, S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP/HdrFromSMTP, T=DNS/RFC822/X-Unix, A=deliver -d $u ------- virtusertable/virtusertable.db : test(a)testdomain.com blaatuser --------- aliases/aliases.db : blaatuser | /opt/dovecot/libexec/dovecot/deliver -d $u ---- sendmail.cw = empty ----- mailertable/mailertable.db : testdomain.com dovecot:dovecot ################# When I run #$ sendmail -bv test(a)testdomain.com sendmail gives : test(a)testdomain.com... deliverable: mailer local, user test (as a matter of fact the user test does exist on my machine, so what he does is stripping of the domainname and he delivers the mail in /var/spool/mqueue/test :-/ ) And I don't see anything in my deliver logfile of course... Help would be appreciated ! thx Ben

2 5

[Dovecot] v1.2.beta1 virtual plugin raw trace
by Robert Schetterer 21 Feb '09

21 Feb '09

Hi Timo, using 1.2 beta with virtual plugin testing parallel imap/pop3 download with dovecot-virtual virtual/INBOX -Trash -Trash/* all dovecot: Feb 11 07:03:08 Panic: POP3(.....@.....): file mailbox-list.c: line 420 (mailbox_list_iter_init_multiple): assertion failed: (*patterns != NULL) dovecot: Feb 11 07:03:08 Error: POP3(....@.....): Raw backtrace: pop3 [0x80ddb01] -> pop3 [0x80ddb82] -> pop3 [0x80dd529] -> pop3 [0x80a609c] -> pop3(mailbox_list_iter_init_namespaces+0xed) [0x80a623d] -> /usr/lib/dovecot/modules/pop3/lib20_virtual_plugin.so(virtual_config_read+0x706) [0xb7ddbec6] -> /usr/lib/dovecot/modules/pop3/lib20_virtual_plugin.so [0xb7ddda0b] -> /usr/lib/dovecot/modules/pop3/lib20_mail_log_plugin.so [0xb7de42ea] -> /usr/lib/dovecot/modules/pop3/lib10_quota_plugin.so [0xb7df014a] -> pop3(mailbox_open+0x52) [0x80a4772] -> pop3(client_create+0x16f) [0x805edcf] -> pop3(main+0x416) [0x8060e96] -> /lib/tls/i686/cmov/libc.so.6(__libc_start_main+0xe0) [0xb7e0b450] -> pop3 [0x805e3d1] as allready described * -Trash -Trash/* all produces Virtual mailbox loops: INBOX dovecot: Feb 11 07:02:00 Error: POP3(....@.....): Couldn't open INBOX: Internal error occurred. Refer to server log for more information. [2009-02-11 07:02:00] whatever i tried setup cant get virtual plugin to work as awaited -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

2 1

[Dovecot] location of temporary files in deliver
by Stuart Henderson 21 Feb '09

21 Feb '09

deliver has the following: -- -- -- /* After buffer grows larger than this, create a temporary file to /tmp where to read the mail. */ #define MAIL_MAX_MEMORY_BUFFER (1024*128) ... static struct istream *create_raw_stream(int fd, time_t *mtime_r) ... input = i_stream_create_seekable(input_list, MAIL_MAX_MEMORY_BUFFER, "/tmp/dovecot.deliver."); -- -- -- On most of my systems, /tmp is relatively small (a few hundred MB, and sometimes on ramdisk), and I like to use /var/tmp for larger temp space. I just had a problem where I exceeded the space available in /tmp while delivering a (multi recipient) message and had to modify the above line to use an alternative location, and recompile. Would it be appropriate to make this a configurable option instead? Thanks. Feb 3 15:14:51 mh1-pl7 deliver(169(a)example.com): write_full(/tmp/dovecot.deliver....) failed: No space left on device Feb 3 15:14:51 mh1-pl7 deliver(149(a)example.com): write_full(/tmp/dovecot.deliver....) failed: No space left on device Feb 3 15:14:51 mh1-pl7 deliver(opx-cc(a)example.com): write_full(/tmp/dovecot.deliver....) failed: No space left on device Feb 3 15:14:51 mh1-pl7 deliver(142(a)example.com): write_full(/tmp/dovecot.deliver....) failed: No space left on device Feb 3 15:14:51 mh1-pl7 deliver(165(a)example.com): write_full(/tmp/dovecot.deliver....) failed: No space left on device Feb 3 15:14:51 mh1-pl7 deliver(152(a)example.com): stat(/tmp/Dovecot Delivery Mail) failed: No space left on device Feb 3 15:14:51 mh1-pl7 deliver(152(a)example.com): msgid=<49885EB9.60706(a)example.com>: save failed to INBOX: BUG: Unknown internal error Feb 3 15:14:51 mh1-pl7 deliver(152(a)example.com): sieve runtime error: Keep: Generic Error Feb 3 15:14:51 mh1-pl7 deliver(152(a)example.com): sieve_execute_bytecode(/home/vmail/example.com/152/.dovecot.sievec) failed Feb 3 15:14:51 mh1-pl7 deliver(125(a)example.com): stat(/tmp/Dovecot Delivery Mail) failed: No space left on device Feb 3 15:14:51 mh1-pl7 deliver(125(a)example.com): msgid=<49885EB9.60706(a)example.com>: save failed to INBOX: BUG: Unknown internal error Feb 3 15:14:51 mh1-pl7 deliver(125(a)example.com): sieve runtime error: Keep: Generic Error Feb 3 15:14:51 mh1-pl7 deliver(125(a)example.com): sieve_execute_bytecode(/home/vmail/example.com/125/.dovecot.sievec) failed

2 1

[Dovecot] How many namespaces for several groups of shared mailboxes ?
by Thomas Hummel 21 Feb '09

21 Feb '09

Hello Timo, let's say you want to implement several distinct groups of shared mailboxes via one (several) public namespace(s) with dovecot-1.1.x/Maildir. For instance, team1, team2 and team3 work on different projects (project1, project2, project3). Obviously, as many public namespaces (#team1, #team2, #team3) would do the trick, but then, any user (including users who don't belong to any above team) would 'see' useless non-selectionable folders #team*. So my idea would be to create only one public namespace (#Public) into which I'd store directories team1, team2, team3, into which I'd put the needed shared mailboxes. Something like /courriel/boites/public/team1/.shared-project1/ /team2/.shared-project2/ /team3/.shared-project3/ with something like namespace public { separator = / prefix = '#Public/' location = maildir:/courriel/boites/public inbox = no hidden = no list = yes subscriptions = yes } I guess if unix right and ACL are set up correctly, other people would only see non-selectionable '#Public'. The only problem is the subscription file : my understanding is that you have only one subscription file per namespace. Maybe unless you specify something like location = maildir:/courriel/boites/public:CONTROL=<some user dependent location> But wouldn't that induce another problem : such a CONTROL directive would put dovecot-uidlist and dovecot-keywords in the same user dependent location. As I want to share the \Seen flag, I have to . put a dovecot-shared file . not specify INDEX (or at least, not to some user dependent location) So I would end up with . uid lists in some user dependant location (as a side effect of having several subscriptions files) . but indexes shared as uid is listed in index : wouldn't that be a problem ? thanks -- Thomas Hummel | Institut Pasteur <hummel(a)pasteur.fr> | Pôle informatique - systèmes et réseau

2 1

[Dovecot] trash plugin and LDA
by dovecot＠corwyn.net 21 Feb '09

21 Feb '09

I just switched from the default postfix LDA to the dovecot LDA, deliver, and am looking into what new features I have. The wiki references the trash plugin with imap. Can I also enable trash with the lda? Rick Rick Steeves http://www.sinister.net "The journey is the destination"

2 1

[Dovecot] Expire plugin does not delete expired mail
by Nicolas Letellier 21 Feb '09

21 Feb '09

Hello. I use expire plugin with dovecot 1.1.10. See my dovecot -n: # 1.1.10: /usr/local/etc/dovecot.conf # OS: FreeBSD 6.3-RELEASE-p9 i386 ufs syslog_facility: local6 protocols: imap imaps managesieve ssl_cert_file: /etc/ssl/mail/mail.domain.net.cert ssl_key_file: /etc/ssl/mail/mail.domain.net.key disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(managesieve): /usr/local/libexec/dovecot/managesieve-login login_user: dovecot-auth login_greeting: Domain mail server login_processes_count: 2 verbose_proctitle: yes first_valid_uid: 143 last_valid_uid: 143 first_valid_gid: 143 last_valid_gid: 143 mail_access_groups: mail mail_location: maildir:/var/mail/vmail/%u/ mail_debug(default): no mail_debug(imap): no mail_debug(managesieve): yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(managesieve): /usr/local/libexec/dovecot/managesieve mail_plugins(default): quota imap_quota mail_log expire mail_plugins(imap): quota imap_quota mail_log expire mail_plugins(managesieve): mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(managesieve): /usr/local/lib/dovecot/managesieve imap_client_workarounds(default): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(managesieve): sieve(default): sieve(imap): sieve(managesieve): ~/dovecot.sieve auth default: mechanisms: plain login master_user_separator: * passdb: driver: passwd-file args: /usr/local/etc/dovecot.masterusers master: yes passdb: driver: sql args: /usr/local/etc/dovecot/dovecot-sql.conf userdb: driver: sql args: /usr/local/etc/dovecot/dovecot-sql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix master: path: /var/run/dovecot/auth-master mode: 432 user: dovecot group: mail plugin: quota: maildir quota_rule: *:storage=1000M quota_rule2: Trash:storage=50M quota_warning: storage=80%% /usr/home/scripts/mail_quota-warning.sh 80 quota_warning2: storage=90%% /usr/home/scripts/mail_quota-warning.sh 85 quota_warning3: storage=95%% /usr/home/scripts/mail_quota-warning.sh 90 quota_warning4: storage=95%% /usr/home/scripts/mail_quota-warning.sh 95 sieve: /var/mail/vmail/%u/dovecot.sieve expire: Trash 7 Pubs 15 Junk 1 expire_dict: proxy::expire dict: expire: mysql:/usr/local/etc/dovecot/dovecot-dict-expire.conf The expire plugin works with mysql database. The mysql table is used, and expire_stamp are written on it: user1(a)domain.net/Trash 1234701558 user1(a)domain.net/Junk 1234386055 user2(a)domain.net/Trash 1234874172 user2(a)domain.net/Junk 1234400921 user1(a)domain.net/Pubs 1235576243 I launch /usr/local/sbin/dovecot --exec-mail ext /usr/local/libexec/dovecot/expire-tool every 4 hours. For 3 days, no mails were deleted. However, I have date_stamp in mysql table. I dropped ALL my mails in Junk/Trash folder ; and delete all dovecot.index* in these folders. After, I restarted dovecot with expire plugin, and when a first mail arrived in one of these folder, a line is created in mysql table. But nothing is deleted in my Trash/Pubs/Junk folder. I'm waiting for 3 days. (first mail arrived in these folder on 2009/02/08). Any ideas? Have I to use cronjob/find to delete the expired mail? Regards, -- -Nicolas.

3 4