- dovecot - dovecot.org

[Dovecot] compile with ssl support
by Catalin Ciubotariu 27 Aug '08

27 Aug '08

Hi, I have installed 1.1.2 first with ssl_disable=yes, work fine but when i set ssl_disable to no and configuring according to dovecot.org (SSL certificates) i get 'SSL support not compiled in but ssl_disable=no' CPPFLAGS=-I/opt/openssl/include LDFLAGS=-L/opt/openssl/lib ./configure make make install what am i missing? i starting with a simple dovecot.conf protocol imap { } protocol pop3 { pop3_uidl_format = %08Xu%08Xv } protocol lda { } auth default { mechanisms = plain cram-md5 passdb passwd-file { args = /etc/passwd.dovecot } } user = root }

1 0

[Dovecot] vacation replies
by CJ Keist 26 Aug '08

26 Aug '08

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, Another wrinkle with vacation replies. I have user forwarding their mail from one domain to our mail server with the vacation reply set. Here is the dovecot script file: require ["fileinto", "vacation"]; # BEGIN VACATION vacation :days 30 :from "joe(a)domainB.edu" :addresses ["joe(a)domainA.edu", "joe(a)domainB.edu"] "********************** OUT OF THE OFFICE ******************* I am on research cruise and will be out of office till Sept. 8th. I will respond to your email when I return. If you need to contact me before then, please send short (<10kB) email to joe(a)someplace.edu. This email is sent by automated responder. Dr. Joe *************************************************************"; domainA would be my server with dovecot installed. Sending to joe@domainA works fine and the vacation reply is sent. But if I send to joe@domainB there is no vacation reply sent. It doesn't even create the .dovecot.lda-dupes file. The log files shows that it is running the sieve script but nothing else. I thought the addresses line allowed you to state that these addresses are good source email addresses to send the reply to. Running dovecot 1.1.2 with Sieve 1.1.5 - -- C. J. Keist Email: cj.keist(a)colostate.edu UNIX/Network Manager Phone: 970-491-0630 Engineering Network Services Fax: 970-491-5569 College of Engineering, CSU Ft. Collins, CO 80523-1301 All I want is a chance to prove 'Money can't buy happiness' -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFItElZA29OFr7C6jcRAtFhAJ9RQHVihxBBG71A6aaYPmCSYj6KHACfVchs 3NBx0Br0YnIO0uhjbss+/xc= =ZCSO -----END PGP SIGNATURE-----

1 1

Re: [Dovecot] namespaces...
by John Doe 26 Aug '08

26 Aug '08

> The SEPARATOR should just refer to the storage structure and the PREFIX > should refer to the hierarchy. So if you use "/" as your SEPARATOR, then > your storage structure will be user-directory/folder/sub-folder and if > you use "." as your storage structure (the default), then your storage > structure will be user-directory/.folder.sub-folder . A PREFIX of INBOX. > should cause all of the folders & sub-folders to appear under the inbox; > a PREFIX of "." should cause all of the folders to appear at the top > level; and a PREFIX of Mail. will should all of the folders to appear > under Mail with the exception of the INBOX. Thx for your long post! ^_^ I understood that it was something like .<prefix><separator>folder1<separator>folder2 But, from my tests, it seems not to work as expected... At least not with thunderbird. By default, Tbird has "allow server to override namespaces" prefix=INBOX. and separator=. => no prefix and Trash system not working. prefix= and separator=. => INBOX. prefix (from tbird) and Trash system working. '/' in prefix and separator seems to be ignored (converted to '.'). I guess I will leave it to prefix= and separator=. but one user who uses apple mail complained about some prefix problems... Thx, JD

2 1

[Dovecot] unclear alias behaviour
by andel 26 Aug '08

26 Aug '08

Hi all In /etc/aliases I have set up an alias for "root" pointing to "david" which is a unix account. Other email accounts are virtual dovecot accounts, one of them is "andel". They all work fine using /etc/postfix/virtual when used with the domain name which is defined in /etc/postfix/virtual.domains. But the alias "david andel" in /etc/postfix/virtual does work only when sending to "david(a)domain.com" but not for the local mails sent to "root". And then there is another behaviour I don't understand. In my virtual mail folder /srv/vmail/domain.com dovecot made a new directory structure "david" which I didn't intend, for postfix should rewrite it to "andel". Where is the error? Thanks for any hints, David

1 0

[Dovecot] Custom Debian package bulding
by Juan Asensio Sánchez 26 Aug '08

26 Aug '08

Hi I am using Debian source packages from http://xi.rename-it.nl/debian/. When downloading dependencies, I have seen that the package requires MySQL, that I don't use. How could I remove this dependency or chanage them? Is that defined in any file? However, I would like to use SQLite or Postgres to store dict data for the Expire plugin. Where should I enable these flags? Thanks.

1 0

[Dovecot] auth failed, 0 attempts
by Bruce Bodger 26 Aug '08

26 Aug '08

Does anyone have any ideas what this may be? Aug 25 12:19:01 G520X2 dovecot: imap-login: Disconnected (auth failed, 0 attempts): rip=192.168.1.1, lip=192.168.1.10 Aug 25 12:19:01 G520X2 dovecot: imap-login: Disconnected (auth failed, 0 attempts): rip=192.168.1.1, lip=192.168.1.10 Hits the server every minute. Running v 1.1.2 on OS X 192.168.1.1 is the router 192.168.1.10 is the server on which dovecot is running. Just started noticing it. Thanks, B. Bodger

2 2

[Dovecot] Issue with: Sendmail, Dovecot and Sieve: -- TECRA_A9 --
by dovecot＠guice.ath.cx 25 Aug '08

25 Aug '08

sendmail -- Version 8.14.2 Compiled with: DNSMAP LOG MAP_REGEX MATCHGECOS MILTER MIME7TO8 MIME8TO7 NAMED_BIND NETINET NETINET6 NETUNIX NEWDB NIS PIPELINING SASLv2 SCANF STARTTLS TCPWRAPPERS USERDB XDEBUG dovecot-1.0.7 Secure and compact IMAP and POP3 servers dovecot-sieve-1.0.2 A sieve plugin for the Dovecot LDA called 'deliver' With focus on the installed version of sieve, shown above, the following rule is within our ~.dovecot.sieve: } elsif header :is "X-Original-To" "dovecot(a)dovecot.org" { discard; stop; } The above rule is the seventh and last rule in the file, however the following mail is 'not being discarded'. Should this not be the appropriate forum, please direct me to the proper list and/or forum. Respectfully yours, dovecot_user

2 2

[Dovecot] LOCALSTATEDIR
by Radomir Zoltowski 25 Aug '08

25 Aug '08

Hi > make distclean between builds solved the issue. Apologies for the noise. Regards, Radomir Zoltowski -- _________________________________________________________ Radomir Zoltowski <Radomir.Zoltowski(a)s3group.com> Applications Engineer Silicon & Software Systems Ltd., IT Department South County Business Park, Leopardstown, Dublin 18, IRELAND Tel.: +353 1 291 1224, Fax: +353 1 291 1001 _________________________________________________________ The information contained in this e-mail and in any attachments is confidential and is designated solely for the attention of the intended recipient(s). If you are not an intended recipient, you must not use, disclose, copy, distribute or retain this e-mail or any part thereof. If you have received this e-mail in error, please notify the sender by return e-mail and delete all copies of this e-mail from your computer system(s). Please direct any additional queries to: communications(a)s3group.com. Thank You. Silicon and Software Systems Limited. Registered in Ireland no. 378073. Registered Office: South County Business Park, Leopardstown, Dublin 18

1 0

[Dovecot] LOCALSTATEDIR
by Radomir Zoltowski 25 Aug '08

25 Aug '08

Hi I'm doing a network install of Dovecot 1.1.2. All is fine apart from a little annoying mistake I've found: I do this: > ./configure --prefix=/appli/tools_Linux/dovecot/1.1.2 --localstatedir=/var && make && make install however, since the --localstatedir is equal to a default value, it is still being constructed as "PREFIX/var" for some reason and in effect produces binary with following strings being built-in: > strings dovecot | grep var /appli/tools/dovecot/1.1.2/var/lib/dovecot /appli/tools/dovecot/1.1.2/var/run/dovecot /appli/tools/dovecot/1.1.2/var/lib/dovecot/ssl-parameters.dat /appli/tools/dovecot/1.1.2/var/lib/dovecot/ssl-parameters.dat var-expand.c var_expand_table_build So, the question is, is this a bug or my understanding wrong? I just need a network install, using local /var directiories for runtime data. Imagine that I have no write permissions to the installation (--prefix) folder. If you can reproduce it, this should be it, if you can't let me know to email you all the environment details. Regards, Radomir Zoltowski -- _________________________________________________________ Radomir Zoltowski <Radomir.Zoltowski(a)s3group.com> Applications Engineer Silicon & Software Systems Ltd., IT Department South County Business Park, Leopardstown, Dublin 18, IRELAND Tel.: +353 1 291 1224, Fax: +353 1 291 1001 _________________________________________________________ The information contained in this e-mail and in any attachments is confidential and is designated solely for the attention of the intended recipient(s). If you are not an intended recipient, you must not use, disclose, copy, distribute or retain this e-mail or any part thereof. If you have received this e-mail in error, please notify the sender by return e-mail and delete all copies of this e-mail from your computer system(s). Please direct any additional queries to: communications(a)s3group.com. Thank You. Silicon and Software Systems Limited. Registered in Ireland no. 378073. Registered Office: South County Business Park, Leopardstown, Dublin 18

1 0

[Dovecot] Override config in deliver command line
by dovecot＠iotti.biz 25 Aug '08

25 Aug '08

Hi all In dovecot deliver LDA, is there a way to override some configuration settings for particular users? Tha full story is: I have a simple postfix/dovecot setup. No virtual users, delivery is done in /home/mail/%u. For a specific user, I would like to deliver to a maildir. Since mail_location is not explicitly configured, I simply created ~/Maildir for that user, relying on the default automatic mailbox location procedure used by dovecot. But I would like to be able to override this setting: for example if I wanted to use a name different from Maildir, this trick would not be sufficient. So it would be nice to have some way to change mail_location (and why not, other config parameters) only for particular users (and for me, doing this on the command line would be good: something like Postfix where you can override config parameters simply writing the new settings in master.cf on the daemon's command line). I noticed the -c command line switch, but I would prefer not to have entirely different configuration files for my users, where a single change must be manually propagated on all the files. I use dovecot-1.0.15 on CentOS5. Maybe this question can be read as a feature request too. Thanks Luigi

2 1