- dovecot - dovecot.org

[Dovecot] Case sensitve problem
by Sven Schmidt 24 Jul '08

24 Jul '08

Hi! I am using Postfix, Mysql and Dovecot 1.0.rc15. It seems that Dovecot creates new mailboxes for eg. User(a)Domain.COM althoug in the name in databse is user(a)domain.com ny logging in pop3. How to solve this problem?

3 4

[Dovecot] how to store flags \Seen into read-only mailbox?
by seriv＠parkheights.dyndns.org 24 Jul '08

24 Jul '08

Hi, I'm trying to use dovecot for storing mailing lists and read-only access for users. The OS is Solaris, authentication for all readers of these lists are from Ldap through PAM, and one local user "listuser" will receive all mail and store them into it's folders (Maildirs). These maildirs are readable (read-only) for all others and they are shared by setting --- mail_location: maildir:/home/vmail/listuser/Maildir:CONTROL=/home/vmail/%u/Maildir/control:INDEX=/home/vmail/%u/Maildir/index --- Mail became readable because in each mail folder to be shared there is dovecot-shared with mode 064, and all users included into his group. But this is the problem: how to have flag \Seen stored in read-only mailbox? As recorded by rawlog, it is ignored now: --- bash-3.00# cat 20080724-103219-10616.in 3 namespace 4 lsub "" "*" 5 list "" "INBOX" 6 list "" "Trash" 7 create "Trash" 8 select "OmniTI.FreeLotto.Ops" 9 UID fetch 1:* (FLAGS) 10 uid store 1:3 +Flags (\Seen) 11 IDLE DONE 12 close 13 logout bash-3.00# cat 20080724-103219-10616.out * OK [RAWLOG TIMESTAMP] 2008-07-24 10:32:19 * NAMESPACE (("" ".")) NIL NIL 3 OK Namespace completed. * LSUB () "." "OmniTI.FreeLotto.ODS" * LSUB () "." "OmniTI.FreeLotto.Ops" 4 OK Lsub completed. * LIST (\HasNoChildren) "." "INBOX" 5 OK List completed. 6 OK List completed. 7 NO Internal error occurred. Refer to server log for more information. [2008-07-24 10:32:19] * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS ()] Read-only mailbox. * 3 EXISTS * 0 RECENT * OK [UNSEEN 1] First unseen. * OK [UIDVALIDITY 1216906857] UIDs valid * OK [UIDNEXT 4] Predicted next UID 8 OK [READ-ONLY] Select completed. * 1 FETCH (UID 1 FLAGS ()) * 2 FETCH (UID 2 FLAGS ()) * 3 FETCH (UID 3 FLAGS ()) 9 OK Fetch completed. 10 OK Store ignored with read-only mailbox. + idling 11 OK Idle completed. 12 OK Close completed. * BYE Logging out 13 OK Logout completed. --- -- Sergey ivanov.

1 0

[Dovecot] Quota
by M. Rodrigo Monteiro 24 Jul '08

24 Jul '08

Hello! This might be an easy question, but here it goes: how can I know the quota of an determined user? I'm trying to use maildir quota... Regards, Rodrigo. -- M. Rodrigo Monteiro falecom(a)rodrigomonteiro.net "Free as in Freedom, not free as in free beer" Linux User # 403730

2 2

Re: [Dovecot] Dovecot antispam (X-DSPAM-Signature)
by Johannes Berg 24 Jul '08

24 Jul '08

On Wed, 2008-07-23 at 23:44 +0100, Nuno Lopes wrote: > I think that the question wasn't to the point. The problem we have is in > the transition phase. At one point we have emails with the header and > emails that haven't got it but we don't want users to notice the > introduction of this plugin and DSPAM. So we would like to allow users > to move any mail to the spam folder even if those mails haven't got the > DSPAM signature. In which case the email could be moved and not passed > to dspam. > > If you see this as a functionality that could go into your plugin we > would be willing to develop the patch based on any idea you have on how > this should be done. Hmm. I don't necessarily see that as a desirable feature because in the case that something is actually wrong with the spam tagging you want to notice it isn't working right. If you really need that, just don't set an error when it happens and do nothing, allowing the move. johannes

1 0

[Dovecot] Dovecot antispam (X-DSPAM-Signature)
by isabel.estevao 24 Jul '08

24 Jul '08

Hi, I recently installed an IMAP server with dovecot and the dovecot antispam plugin with dspam backend. If I configure dspam to not include the signature in the X-DSPAM-Signature header will I be able to move mail into SPAM folder? Regards, Isabel

4 4

[Dovecot] Conversion help
by Jason Frisvold 24 Jul '08

24 Jul '08

Hi there, I'm working on converting my server from using bincimap to dovecot. I seem to be having some trouble with folders, however. Binc was set up like this : depot = "IMAPdir", /* Use Maildir++ style type = "Maildir", /* only Maildir path = "Maildir", /* default path */ auto create inbox = "yes", /* create INBOX in auto subscribe mailboxes = "INBOX", /* list mailboxes umask = "077" /* use this umask I have dovecot set up thusly : mail_location = maildir:/home/vpopmail/domains/%d/%n/Maildir namespace private { separator = / prefix = INBOX/ inbox = yes hidden = yes } The problem is, I'm not seeing any folders.. If I do a listing in the directory, I see this : -rw------- 1 vpopmail vchkpw 35453 Mar 10 2004 bincimap-cache -rw------- 1 vpopmail vchkpw 702 Jul 16 19:20 .bincimap-subscribed -rw------- 1 vpopmail vchkpw 73 Mar 10 2004 bincimap-uidvalidity drwx------ 2 vpopmail vchkpw 532480 Jul 21 11:49 cur -rw------- 1 vpopmail vchkpw 25956 Jul 21 11:49 dovecot.index -rw------- 1 vpopmail vchkpw 35840 Jul 21 11:49 dovecot.index.cache -rw------- 1 vpopmail vchkpw 18220 Jul 21 11:49 dovecot.index.log -rw------- 1 vpopmail vchkpw 42080 Jul 21 11:34 dovecot.index.log.2 -rw------- 1 vpopmail vchkpw 106631 Jul 21 11:49 dovecot-uidlist drwx------ 2 vpopmail vchkpw 4096 Jul 21 09:38 INBOX drwx------ 5 vpopmail vchkpw 4096 Jul 20 16:17 INBOX\.Drafts drwx------ 5 vpopmail vchkpw 4096 Jul 16 18:53 INBOX\.Learn FP drwx------ 5 vpopmail vchkpw 4096 Jul 20 17:37 INBOX\.Learn Spam drwx------ 5 vpopmail vchkpw 4096 Jul 16 18:56 INBOX\.Sent drwx------ 5 vpopmail vchkpw 4096 Jul 20 17:37 INBOX\.Spam drwx------ 5 vpopmail vchkpw 4096 Jul 21 11:44 INBOX\.Trash drwx------ 2 vpopmail vchkpw 348160 Jul 21 11:53 new -rw------- 1 vpopmail vchkpw 0 Jul 21 11:34 subscriptions drwx------ 2 vpopmail vchkpw 4096 Jul 21 11:53 tmp -rw------- 1 vpopmail vchkpw 72 Jul 16 18:57 uidvalfilename It would appear that I need to use . as my separator, but that doesn't work either.. Any thoughts? Also, I'm using SQL for authentication. Is there a limitation to the characters allowed in the password? I was unable to use a password with a # in it, or is there a way to escape it? # 1.0.7: /etc/dovecot.conf protocols: imap imaps ssl_cert_file: /path/to/cert.pem ssl_key_file: /path/to/cert.pem ssl_cipher_list: !ADH:RC4+RSA:HIGH:MEDIUM:LOW:EXP:+SSLv2:+EXP login_dir: /var/run/dovecot/login login_executable: /usr/libexec/dovecot/imap-login first_valid_uid: 89 mail_location: maildir:/home/vpopmail/domains/%d/%n/Maildir mail_debug: yes namespace: type: private separator: / prefix: INBOX/ inbox: yes hidden: yes auth default: user: vpopmail passdb: driver: sql args: /etc/dovecot-sql.conf userdb: driver: sql args: /etc/dovecot-sql.conf Thanks, -- Jason 'XenoPhage' Frisvold XenoPhage0(a)gmail.com http://blog.godshell.com

2 1

[Dovecot] v1.1.2 release candidate
by Timo Sirainen 24 Jul '08

24 Jul '08

I've finally read and answered most of the mails on this list. If you haven't received an answer to your question, resend it. There are a couple of tricky mbox issues left, but I'm not sure if I can do anything about them unless someone can show me how to reproduce the problems. There are quite a lot of new features in v1.1.2 actually. Most of them are in plugins so hopefully they shouldn't destabilize anything. Anyway I tought I'd just in case put out a quick release candidate so at least a few people could try it. I'll probably make the final v1.1.2 release in a day or two. So, please test: http://dovecot.org/tmp/dovecot-1.1.2-rc.tar.gz Largest changes since v1.1.1 are: + Added full text search indexing support for Apache Lucene Solr server: http://wiki.dovecot.org/Plugins/FTS/Solr + IMAP SORT: Added X-SCORE sort key for use with Solr searches. + zlib plugin supports now bzip2 also. + quota: All backends now take noenforcing parameter. + Maildir: Add ,S=<size> to maildir filename whenever quota plugin is loaded, even when not using Maildir++ quota. + deliver: Allow lda section to override plugin settings. + deliver: Giving a -m <namespace prefix> parameter now silently saves the mail to INBOX. This is useful for e.g. -m INBOX/${extension} + Added a new maildirlock utility for write-locking Dovecot Maildir. + dict-sql: Support non-MySQL databases by assuming they implement the "INSERT .. ON DUPLICATE KEY" using an INSERT trigger. - SORT: Fixed several crashes/errors with sort indexing. - IMAP: BODYSTRUCTURE is finally RFC 3501 compliant. Earlier versions didn't include Content-Location support. - IMAP: Fixed bugs with listing INBOX. - Maildir: maildirfolder file wasn't created when dovecot-shared file existed on the root directory - deliver didn't expand %variables in namespace location settings. - zlib: Copying non-compressed messages resulted in empty mails (except when hardlink-copying between maildirs). - mbox-snarf plugin was somewhat broken - deliver + Maildir: If uidlist couldn't be locked while saving, we might have assert-crashed

6 15

[Dovecot] Problems with deliver and account resolving
by Andreas Podgurski 24 Jul '08

24 Jul '08

Hi! I'm currently setting up my first mailsystem based on dovecot. For a far way, working with dovecot was very convenient, but after I had to integrate deliver, it became massivly painful. My components are postfix as MTA, postgresql as user database and dovecot as IMAP server. When translating the mail adresse into the account name, something goes terribly wrong (Mail adresses modified to protect against spam, think about them in correct format): dovecot: Jul 22 01:48:13 Info: auth(default-listen): master in: USER 1 Andreas.Podgurski_at_MediaGUILD.de service=deliver dovecot: Jul 22 01:48:13 Info: auth(default-listen): prefetch(Andreas.Podgurski_at_MediaGUILD.de): passdb didn't return userdb entries, trying the next userdb dovecot: Jul 22 01:48:13 Info: auth(default-listen): sql(Andreas.Podgurski_at_MediaGUILD.de): SELECT 1011 AS uid,1011 AS gid,'/var/www/jade/mail/' || admin.username AS home,admin.username AS user FROM admin,email WHERE lower(email.local_address) = lower('Andreas.Podgurski') AND email.receiver = admin.id; dovecot: Jul 22 01:48:13 Info: auth(default-listen): auth(Andreas.Podgurski_at_MediaGUILD.de): username changed Andreas.Podgurski_at_MediaGUILD.de -> SunAdmin dovecot: Jul 22 01:48:13 Info: auth(default-listen): master out: USER 1 SunAdmin uid=1011 gid=1011 home=/var/www/jade/mail/SunAdmin deliver(Andreas.Podgurski_at_MediaGUILD.de): Jul 22 01:48:13 Error: mkdir(/var/www/jade/mail/Andreas.Podgurski_at_MediaGUILD.de/cur) failed: Permission denied deliver(Andreas.Podgurski_at_MediaGUILD.de): Jul 22 01:48:13 Info: msgid=<20080721234813.302260(a)gmx.net>: save failed to INBOX: Internal error occurred. Refer to server log for more information. [2008-07-22 01:48:13] As you can see, the account SunAdmin has an email adresse andreas.podgurski_at_mediaguild.de assigned. The database seems to reveil the username correctly, but after that, deliver continues to use the original mail adresse, not the account name returned by the auth master. Any idea, where my solution went the wrong way? The uid/gid belong to vmail:vmail, which is used for the auth-master, as well as for running deliver and to dispatch the postfix messages. Btw., I ask myself, how dovecot can assume to use prefetch in this case, as prefetch bases upon the password query, which has to fail in this case, as there is no password. Shouldn't it not even try to use the prefetch values there...? Thanks in advance, Andreas Podgurski -- Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger

2 1

[Dovecot] cosmetic: "userdb" checkpassword
by Heiko Schlichting 24 Jul '08

24 Jul '08

Hi, $ dovecot --build-options Build options: ioloop=epoll notify=inotify Mail storages: maildir SQL drivers: Passdb: checkpassword Userdb: checkpassword prefetch Isn't "checkpassword" misplaced in the userdb list? For me it seems that USERDB_CHECKPASSWORD is only used in configure and for printing the build-options. Additionally checkpassword protocol does not makes any sense for a userdb. It could be used only for passdb plus prefetching userdb. Therefore I suggest to remove USERDB_CHECKPASSWORD to make this more obvious althought this is only cosmetic. Heiko Heiko Schlichting Freie Universität Berlin heiko(a)FU-Berlin.DE Zentraleinrichtung für Datenverarbeitung (ZEDAT) Telefon +49 30 838-54327 Fabeckstraße 32 Telefax +49 30 838454327 14195 Berlin

2 1

[Dovecot] Problem authenticating iPod Touch
by Mark Leisher 24 Jul '08

24 Jul '08

Given the (slightly edited) config info below, iPod Touch users are unable to connect, leaving the following message in the log file: dovecot: Jul 23 10:00:40 Info: imap-login: Disconnected (auth failed, 0 attempts): rip=1.2.3.4, lip=5.6.7.8, TLS handshaking: Disconnected Even with maximum logging on, no other error messages seem related to this problem. Am I missing something simple I didn't catch in the list archives? Or is it more likely a problem on the iPod side? The iPods connect to our non-dovecot IMAP servers with no problem. # 1.1.1: /usr/local/etc/dovecot.conf base_dir: /var/run/dovecot/ log_path: /var/log/imap-dovecot listen: *:143 ssl_listen *:943 ssl_cert_file: /etc/ssl/dovecot.pem login_dir: /var/run/dovecot/login login_executable: /usr/local/libexec/dovecot/imap-login login_user: _dovecot login_greeting: IMAP ready. login_processes_count: 10 login_max_processes_count: 30 mail_location: maildir:~/Maildir mail_nfs_index: yes auth default: passdb: driver: passwd userdb: driver: passwd -- Mark Leisher

2 1