- dovecot - dovecot.org

[Dovecot] unclear alias behaviour
by andel 26 Aug '08

26 Aug '08

Hi all In /etc/aliases I have set up an alias for "root" pointing to "david" which is a unix account. Other email accounts are virtual dovecot accounts, one of them is "andel". They all work fine using /etc/postfix/virtual when used with the domain name which is defined in /etc/postfix/virtual.domains. But the alias "david andel" in /etc/postfix/virtual does work only when sending to "david(a)domain.com" but not for the local mails sent to "root". And then there is another behaviour I don't understand. In my virtual mail folder /srv/vmail/domain.com dovecot made a new directory structure "david" which I didn't intend, for postfix should rewrite it to "andel". Where is the error? Thanks for any hints, David

1 0

[Dovecot] Custom Debian package bulding
by Juan Asensio Sánchez 26 Aug '08

26 Aug '08

Hi I am using Debian source packages from http://xi.rename-it.nl/debian/. When downloading dependencies, I have seen that the package requires MySQL, that I don't use. How could I remove this dependency or chanage them? Is that defined in any file? However, I would like to use SQLite or Postgres to store dict data for the Expire plugin. Where should I enable these flags? Thanks.

1 0

[Dovecot] auth failed, 0 attempts
by Bruce Bodger 26 Aug '08

26 Aug '08

Does anyone have any ideas what this may be? Aug 25 12:19:01 G520X2 dovecot: imap-login: Disconnected (auth failed, 0 attempts): rip=192.168.1.1, lip=192.168.1.10 Aug 25 12:19:01 G520X2 dovecot: imap-login: Disconnected (auth failed, 0 attempts): rip=192.168.1.1, lip=192.168.1.10 Hits the server every minute. Running v 1.1.2 on OS X 192.168.1.1 is the router 192.168.1.10 is the server on which dovecot is running. Just started noticing it. Thanks, B. Bodger

2 2

[Dovecot] Issue with: Sendmail, Dovecot and Sieve: -- TECRA_A9 --
by dovecot＠guice.ath.cx 25 Aug '08

25 Aug '08

sendmail -- Version 8.14.2 Compiled with: DNSMAP LOG MAP_REGEX MATCHGECOS MILTER MIME7TO8 MIME8TO7 NAMED_BIND NETINET NETINET6 NETUNIX NEWDB NIS PIPELINING SASLv2 SCANF STARTTLS TCPWRAPPERS USERDB XDEBUG dovecot-1.0.7 Secure and compact IMAP and POP3 servers dovecot-sieve-1.0.2 A sieve plugin for the Dovecot LDA called 'deliver' With focus on the installed version of sieve, shown above, the following rule is within our ~.dovecot.sieve: } elsif header :is "X-Original-To" "dovecot(a)dovecot.org" { discard; stop; } The above rule is the seventh and last rule in the file, however the following mail is 'not being discarded'. Should this not be the appropriate forum, please direct me to the proper list and/or forum. Respectfully yours, dovecot_user

2 2

[Dovecot] LOCALSTATEDIR
by Radomir Zoltowski 25 Aug '08

25 Aug '08

Hi > make distclean between builds solved the issue. Apologies for the noise. Regards, Radomir Zoltowski -- _________________________________________________________ Radomir Zoltowski <Radomir.Zoltowski(a)s3group.com> Applications Engineer Silicon & Software Systems Ltd., IT Department South County Business Park, Leopardstown, Dublin 18, IRELAND Tel.: +353 1 291 1224, Fax: +353 1 291 1001 _________________________________________________________ The information contained in this e-mail and in any attachments is confidential and is designated solely for the attention of the intended recipient(s). If you are not an intended recipient, you must not use, disclose, copy, distribute or retain this e-mail or any part thereof. If you have received this e-mail in error, please notify the sender by return e-mail and delete all copies of this e-mail from your computer system(s). Please direct any additional queries to: communications(a)s3group.com. Thank You. Silicon and Software Systems Limited. Registered in Ireland no. 378073. Registered Office: South County Business Park, Leopardstown, Dublin 18

1 0

[Dovecot] LOCALSTATEDIR
by Radomir Zoltowski 25 Aug '08

25 Aug '08

Hi I'm doing a network install of Dovecot 1.1.2. All is fine apart from a little annoying mistake I've found: I do this: > ./configure --prefix=/appli/tools_Linux/dovecot/1.1.2 --localstatedir=/var && make && make install however, since the --localstatedir is equal to a default value, it is still being constructed as "PREFIX/var" for some reason and in effect produces binary with following strings being built-in: > strings dovecot | grep var /appli/tools/dovecot/1.1.2/var/lib/dovecot /appli/tools/dovecot/1.1.2/var/run/dovecot /appli/tools/dovecot/1.1.2/var/lib/dovecot/ssl-parameters.dat /appli/tools/dovecot/1.1.2/var/lib/dovecot/ssl-parameters.dat var-expand.c var_expand_table_build So, the question is, is this a bug or my understanding wrong? I just need a network install, using local /var directiories for runtime data. Imagine that I have no write permissions to the installation (--prefix) folder. If you can reproduce it, this should be it, if you can't let me know to email you all the environment details. Regards, Radomir Zoltowski -- _________________________________________________________ Radomir Zoltowski <Radomir.Zoltowski(a)s3group.com> Applications Engineer Silicon & Software Systems Ltd., IT Department South County Business Park, Leopardstown, Dublin 18, IRELAND Tel.: +353 1 291 1224, Fax: +353 1 291 1001 _________________________________________________________ The information contained in this e-mail and in any attachments is confidential and is designated solely for the attention of the intended recipient(s). If you are not an intended recipient, you must not use, disclose, copy, distribute or retain this e-mail or any part thereof. If you have received this e-mail in error, please notify the sender by return e-mail and delete all copies of this e-mail from your computer system(s). Please direct any additional queries to: communications(a)s3group.com. Thank You. Silicon and Software Systems Limited. Registered in Ireland no. 378073. Registered Office: South County Business Park, Leopardstown, Dublin 18

1 0

[Dovecot] Override config in deliver command line
by dovecot＠iotti.biz 25 Aug '08

25 Aug '08

Hi all In dovecot deliver LDA, is there a way to override some configuration settings for particular users? Tha full story is: I have a simple postfix/dovecot setup. No virtual users, delivery is done in /home/mail/%u. For a specific user, I would like to deliver to a maildir. Since mail_location is not explicitly configured, I simply created ~/Maildir for that user, relying on the default automatic mailbox location procedure used by dovecot. But I would like to be able to override this setting: for example if I wanted to use a name different from Maildir, this trick would not be sufficient. So it would be nice to have some way to change mail_location (and why not, other config parameters) only for particular users (and for me, doing this on the command line would be good: something like Postfix where you can override config parameters simply writing the new settings in master.cf on the daemon's command line). I noticed the -c command line switch, but I would prefer not to have entirely different configuration files for my users, where a single change must be manually propagated on all the files. I use dovecot-1.0.15 on CentOS5. Maybe this question can be read as a feature request too. Thanks Luigi

2 1

[Dovecot] Errors with dovecot 1.1.2
by Lauri Jesmin 25 Aug '08

25 Aug '08

Hello, i upgraded dovecot to 1.1.2 this weekend and i get those errors: grep dovecot /var/log/net/maillog |grep Panic | cut -d " " -f 11-100| sort | uniq -c | sort -rn 7368 file index-sync.c: line 39: assertion failed: (seq_range_exists(&ibox->recent_flags, uid)) 71 file index-mail.c: line 1091: assertion failed: (! mail->data.destroying_stream) 18 file mbox-sync-rewrite.c: line 590: assertion failed: (mails[idx].from_offset == start_offset) 5 file mbox-lock.c: line 675: assertion failed: (lock_type == F_RDLCK || mbox->mbox_lock_type != F_RDLCK) 3 file ostream-file.c: line 533: assertion failed: ((size_t)ret == total_size || !fstream->file) My setup is this: 3 servers, all Solaris, running dovecot, share home directiories via NFS, mbox format mailboxes in home directories. Indexes are separate in every server, not shared via NFS. About 20 000 users total. When old indexes (1.0.15) were present, mailboxes with UID validity problems did not fix themselves, but after i removed index directories in all machines, seems like it started to repair uid validity problems. The first panic seems to be tied to UID validity problems. Some locking problems may be, because i renamed index directory and created new while dovecot was running. -- Lauri Jesmin <lauri.jesmin(a)ut.ee> Tartu Ülikool

1 0

[Dovecot] Postfix and Dovecot SASL authentication error
by sharad kanekar 25 Aug '08

25 Aug '08

ear All, I configured Postfix 2.3.3-2 on CentOS 5.2 using SASL Dovecot authentication put I am facing the problem to receive mails . My postconf -n result is: [root@mails ~]# postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix debug_peer_level = 2 html_directory = no inet_interfaces = all mail_owner = postfix mail_spool_directory = /var/spool/mail mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = $myhostname, localhost.$mydomain, localhost mydomain = coreteamsolutions.in myhostname = mails.coreteamsolutions.in mynetworks = 192.168.1.0/24, 127.0.0.0/8 mynetworks_style = subnet myorigin = $myhostname newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES sample_directory = /usr/share/doc/postfix-2.3.3/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_path = private/auth smtpd_sasl_type = dovecot unknown_local_recipient_reject_code = 550 And my /var/log/maillog is: Aug 23 19:01:03 mails dovecot: Dovecot v1.0.rc15 starting up Aug 23 19:01:55 mails postfix/smtpd[3472]: warning: SASL: Connect to private/auth failed: No such file or directory Aug 23 19:01:55 mails postfix/smtpd[3472]: fatal: no SASL authentication mechanisms Aug 23 19:01:56 mails postfix/master[3407]: warning: process /usr/libexec/postfix/smtpd pid 3472 exit status 1 Aug 23 19:01:56 mails postfix/master[3407]: warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling Aug 23 19:02:56 mails postfix/smtpd[3507]: warning: SASL: Connect to private/auth failed: No such file or directory Aug 23 19:02:56 mails postfix/smtpd[3507]: fatal: no SASL authentication mechanisms Aug 23 19:02:57 mails postfix/master[3407]: warning: process /usr/libexec/postfix/smtpd pid 3507 exit status 1 Aug 23 19:02:57 mails postfix/master[3407]: warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling Aug 23 19:11:08 mails postfix/smtpd[3579]: warning: SASL: Connect to private/auth failed: No such file or directory Aug 23 19:11:08 mails postfix/smtpd[3579]: fatal: no SASL authentication mechanisms Aug 23 19:11:09 mails postfix/master[3407]: warning: process /usr/libexec/postfix/smtpd pid 3579 exit status 1 Aug 23 19:11:09 mails postfix/master[3407]: warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling Aug 23 19:12:09 mails postfix/smtpd[3582]: warning: SASL: Connect to private/auth failed: No such file or directory Aug 23 19:12:09 mails postfix/smtpd[3582]: fatal: no SASL authentication mechanisms Aug 23 19:12:10 mails postfix/master[3407]: warning: process /usr/libexec/postfix/smtpd pid 3582 exit status 1 Aug 23 19:12:10 mails postfix/master[3407]: warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling And our server 's fetchmail -vvv log is: [sharad@mails ~]$ fetchmail -vvv fetchmail: 6.3.6 querying coreteamsolutions.in (protocol POP3) at Sat 23 Aug 2008 07:13:41 PM IST: poll started Trying to connect to 66.7.148.25/110...connected. fetchmail: POP3< +OK Hello there. fetchmail: POP3> CAPA fetchmail: POP3< +OK Here's what I can do: fetchmail: POP3< STLS fetchmail: POP3< TOP fetchmail: POP3< USER fetchmail: POP3< LOGIN-DELAY 10 fetchmail: POP3< PIPELINING fetchmail: POP3< UIDL fetchmail: POP3< IMPLEMENTATION Courier Mail Server fetchmail: POP3< . fetchmail: POP3> USER sharad(a)coreteamsolutions.in fetchmail: POP3< +OK Password required. fetchmail: POP3> PASS * fetchmail: POP3< +OK logged in. fetchmail: selecting or re-polling default folder fetchmail: POP3> STAT fetchmail: POP3< +OK 1 805 fetchmail: POP3> LAST fetchmail: POP3< -ERR Invalid command. fetchmail: Invalid command. fetchmail: POP3> UIDL fetchmail: POP3< +OK fetchmail: POP3< 1 UID60-1217729843 fetchmail: 1 is unseen fetchmail: POP3< . 1 message for sharad(a)coreteamsolutions.in at coreteamsolutions.in (805 octets). fetchmail: POP3> LIST 1 fetchmail: POP3< +OK 1 805 fetchmail: POP3> TOP 1 99999999 fetchmail: POP3< +OK headers follow. reading message sharad@coreteamsolutions.in@coreteamsolutions.in:1 of 1 (805 octets) About to rewrite Return-Path: <sharad(a)coreteamsolutions.in> Rewritten version is Return-Path: <sharad(a)coreteamsolutions.in> About to rewrite From: <sharad(a)coreteamsolutions.in> Rewritten version is From: <sharad(a)coreteamsolutions.in> About to rewrite To: <sharad(a)coreteamsolutions.in> Rewritten version is To: <sharad(a)coreteamsolutions.in> Trying to connect to 127.0.0.1/25...connected. fetchmail: smtp listener protocol error Trying to connect to 127.0.0.1/25...connected. fetchmail: smtp listener protocol error fetchmail: SMTP connect to localhost failed fetchmail: POP3> QUIT fetchmail: POP3< This is an e-mail message sent automatically by Microsoft Office Outlook's Account Manager while testing the settings for your POP3 account. fetchmail: SMTP transaction error while fetching from sharad@coreteamsolutions.in@coreteamsolutions.in and delivering to SMTP host localhost fetchmail: 6.3.6 querying coreteamsolutions.in (protocol POP3) at Sat 23 Aug 2008 07:13:56 PM IST: poll completed fetchmail: discarding new UID list fetchmail: Query status=10 (SMTP) fetchmail: Deleting fetchids file. fetchmail: normal termination, status 10 fetchmail: Deleting fetchids file. please help me to rectify this problem. Thanks and Regards, -- Thanks and Regards, Sharad Kanekar

5 4

Re: [Dovecot] password issue
by Chris Buckley 25 Aug '08

25 Aug '08

On Mon, 25 Aug 2008, gishaust wrote: >> Easily fixed. (You are using MD5 for your passphrases, right?) >> >> in dovecot-sql.conf >> default_pass_scheme = MD5 >> >> /etc/init.d/dovecot restart >> >> That should work. >> > > It work great thankyou for your help. You find this on the ubuntu server > forum as I have posted the same issue and never got a response now i show it > solved thanks again this has been a week long issue. No problem. Please remember to keep dovecot-mailing-list on CC (reply-to-all) so others can benefit. NB: I would recommend looking at CentOS/Red Hat for a proper Enterprise Server OS. All the best, -- Kind Regards, :: http://www.cjbuckley.net/ Chris Buckley :: http://photos.cjbuckley.net/

1 0