- dovecot - dovecot.org

[Dovecot] How to use deliver to deliver to virtual users
by Andrew Falanga 05 Jan '08

05 Jan '08

Hi, Ok, here's my setup, each virtual user has a home directory as follows: /virtusers/<v_userid> and per the INBOX directive in the dovecot.conf file I also have a file as follows: /var/mail/<v_userid> Now, I've followed the directions as outlined here: http://wiki.dovecot.org/LDA/Sendmail But every time I send mail to one of my virtual users, I get this message The original message was received at Sat, 5 Jan 2008 14:22:51 -0700 (MST) from wa-out-1112.google.com [209.85.146.183] ----- The following addresses had permanent fatal errors ----- /var/mail/jdunkin (reason: Can't create output) (expanded from: <jdunkin(a)whitneybaptist.org>) ----- Transcript of session follows ----- 550 5.0.0 /var/mail/jdunkin... Can't create output What could I be missing? Andy

1 0

[Dovecot] help using sendmail LDA
by Anil 04 Jan '08

04 Jan '08

I am stuck. I get nothing in the logs (about deliver). Sendmail complains about "User unknown". I am not sure I have my sendmail.mc configured right, can someone confirm or give me some sample config files that make use of Dovecot+LDAP and sendmail LDA? Dovecot is running as root. I am a little confused, so the auth-master is not even needed? (the whole socket listen {}, since I am using static userdb and the user information was already found at authentication/login) Thank You! # 20080102: /usr/local/dovecot/etc/dovecot.conf listen: *:143 ssl_disable: yes disable_plaintext_auth: no login_dir: /usr/local/dovecot/var/run/dovecot/login login_executable: /usr/local/dovecot/libexec/dovecot/imap-login login_log_format_elements: user=<%n@%d> method=%m rip=%r lip=%l %c login_max_connections: 64 max_mail_processes: 128 mail_location: maildir:~/Maildir mail_debug: yes auth default: verbose: yes debug: yes passdb: driver: ldap args: /usr/local/dovecot/etc/dovecot-ldap.conf userdb: driver: static args: uid=vmail gid=vmail home=/var/mail/apps/%d/%n socket: type: listen master: path: /var/run/dovecot-auth-master mode: 384 user: vmail group: vmail My sendmail.mc file: define(`confFALLBACK_SMARTHOST', `mailhost$?m.$m$.')dnl define(`LOCAL_MAILER_PATH',`/usr/local/dovecot/libexec/dovecot/deliver') define(`LOCAL_MAILER_FLAGS',`DFMPhfnu9') define(`LOCAL_MAILER_ARGS',`deliver -d $u') MAILER(`local')dnl MAILER(`smtp')dnl LOCAL_NET_CONFIG R$* < @ $* .$m. > $* $#esmtp $@ $2.$m $: $1 < @ $2.$m. > $3

2 3

[Dovecot] FETCH for mailbox INBOX UID 39641 got too little data: 4823 vs 4825
by Mikhail Teterin 04 Jan '08

04 Jan '08

Whenever I try to access an e-mail in the middle (rather than at the end) of the mailbox, my mail-client (KMail) gets an error a message like this is logged in the maillog: IMAP(mi): FETCH for mailbox INBOX UID 39641 got too little data: 4823 vs 4825 IMAP(mi): Disconnected: Disconnected The actual numbers vary, but it is always X vs X+2 The problem started when I upgraded to 1.0.8. Unfortunately, it is still here with 1.0.9. The mailbox in question is the standard Unix mbox (/var/mail/mi in my case). The server runs FreeBSD/amd64. Please, advise. Thanks! -mi

5 11

[Dovecot] backup dovecot
by Nikolay Shopik 04 Jan '08

04 Jan '08

What is correct way to backup dovecot store? Is am I right what is just enough to copy all maildir and my configuration. So in case failure I can just prepare new machine copy config, maildirs and I'm good to go with this.

7 11

[Dovecot] Optimizing POP3 performance?
by Sebastian Färber 04 Jan '08

04 Jan '08

Hello, I recently migrated to Dovecot from Courier-IMAP and i'm very happy with the IMAP Performance and Dovecot in general. The server is running qmail-ldap and i'm still using the qmail pop3 daemon for the POP3 users. Because i want to get rid of qmail completely (switching to exim) i just tried to replace the qmail pop3 daemon with dovecot too. Immediately after the migration the server became basically unusable because of the high I/O Load caused by the dovecot pop3 daemon. I did some debugging and it looks like dovecot opens every old mail in a users maildir and wants to create it's index files etc. I tried running dovecot pop3 with and without "in memory" indexes but this didn't change anything. Is it possible to disable the indexing of the old e-mails completly for pop3? I understand that dovecot is primarily an IMAP Server but i didn't expect the POP3 Performance to be that bad compared to the qmail pop3 daemon (which is very very basic i have to admit). Is there anything i may have overlooked which helps with the POP3 Performance, any patches that disable the unnecessary indexing etc.? If not, what do you guys recommend and use as a pop3 daemon that is fast and stable? I'm using dovecot 1.0.2 (i checked the ChangeLog, doesn't look like upgrading would give better pop3 performance?) and the relevant pop3-config is: mail_location: maildir:~/Maildir:INDEX=MEMORY mail_debug: yes dotlock_use_excl: yes maildir_copy_with_hardlinks: yes mail_executable: /usr/local/dovecot/libexec/dovecot/pop3 mail_plugin_dir: /usr/local/dovecot/lib/dovecot/pop3 pop3_enable_last: yes pop3_uidl_format: %f pop3_client_workarounds: outlook-no-nuls oe-ns-eoh Any hint in the right direction is greatly appreciated Regards, Sebastian Faerber

2 2

[Dovecot] Homedir permissions problems with LDAP
by "Fábio M. Catunda" 04 Jan '08

04 Jan '08

Sorry, my previous message entered like a reply, so I'm sending again to keep the list in order. Hi, I'm using dovecot 1.0.5-1 (debian stable) and I'm trying to build a virtual host machine with ldap. In my dovecot-ldap.conf thats what I have: uris = ldap://<ldapserver>/ dn = cn=Manager, dc=domain, dc=com, dc=br dnpass = <ultra secret passwd> sasl_bind = no tls = no ldap_version = 3 base = ou=Users, dc=domain, dc=com, dc=br deref = never scope = subtree user_attrs = homeDirectory=homeDirectory user_filter = (&(mail=%u)) pass_attrs = mail=user,userPassword=password pass_filter = (&(mail=%u)) default_pass_scheme = CRYPT user_global_uid = 107 user_global_gid = 109 But I don't want to read homeDirectory from LDAP, so I have the following in dovecot.conf mail_location = maildir:/var/virtual/%d/%n/ The question is when I try to log into imap I receive the following error: dovecot: 2008-01-03 10:03:55 Error: IMAP(magalhaes(a)fmcs.com.br): mkdir(/HOME_DIRECTORY_USED_BUT_NOT_GIVEN_BY_USERDB/expunged/cur) failed: Permission denied dovecot: 2008-01-03 10:03:55 Error: IMAP(magalhaes(a)fmcs.com.br): mkdir(/HOME_DIRECTORY_USED_BUT_NOT_GIVEN_BY_USERDB/deleted/cur) failed: Permission denied dovecot: 2008-01-03 10:03:55 Error: IMAP(magalhaes(a)fmcs.com.br): mkdir(/HOME_DIRECTORY_USED_BUT_NOT_GIVEN_BY_USERDB/deleted/expunged/cur) failed: Permission denied (I'm using lazy_expunge too) I can log in and etc, but this is strange for me, why do I receive this Permission denied message? The directory /var/virtual/<domain>/<user>/ is owned by uid 107 and gid 109, so, i believe thats ok. My homedir in ldap is /home/samba/<user> , so I changed tried to chown 107:109 too but I still get this error. Is there a way for me to know what is the full path that dovecot is trying to use? HOME_DIRECTORY_USED_BUT_NOT_GIVEN_BY_USERDB is no helping me too much! Oh, I imagine that my lazy_expunge conf may be helpfull: namespace private { prefix = .EXPUNGED/ separator = / location = maildir:~/expunged hidden = yes } namespace private { prefix = .DELETED/ separator = / location = maildir:~/deleted hidden = yes } namespace private { prefix = .DELETED/.EXPUNGED/ separator = / location = maildir:~/deleted/expunged hidden = yes } Thanks for all!

1 1

[Dovecot] Compile error introduced in b13 (Solaris 10)
by mikkel＠euro123.dk 03 Jan '08

03 Jan '08

Any news on the b13 compile issue on Solaris 10 (both Sparc and X86)? Would be nice to know whether it's our own headache or something thats not supposed to be and thus expected to be fixed in the next release. Just to be clear this didn't occur in any other release (I've compiled all previous v1.1 betas on the same setup including b12). Ref.: http://dovecot.org/list/dovecot/2007-December/027702.html http://dovecot.org/list/dovecot/2007-December/027704.html Regards, Mikkel

1 1

[Dovecot] latest 1.1 betas and quota warning
by arvids 03 Jan '08

03 Jan '08

Hello, I noticed that quota warning is not executed with latest 1.1 betas and I looked at the code that implements quota warning. Here it is (line 657 in quota.c): if ((bytes_current < warnings[i].bytes_limit && bytes_current >= warnings[i].bytes_limit) || (count_current < warnings[i].count_limit && count_current >= warnings[i].count_limit)) { quota_warning_execute(warnings[i].command); break; } It seems to me that quota_warning_execute function will never be executed. Timo, can you look at this code? Regards, Arvids

1 0

Re: [Dovecot] [Fwd: Re: Building path to maildir]
by Michel Bulgado 03 Jan '08

03 Jan '08

Hi Charles I receive the Timo's reply. thanks for send me again Use the option that i said, but the problem persists. userdb static { args = uid=500 gid=500 } userdb prefetch { } Jan 2 23:50:08 michel dovecot: auth(default): new auth connection: pid=18374 Jan 2 23:50:20 michel dovecot: auth(default): client in: AUTH 1 PLAIN service=POP3 secured lip=127.0.0.1 rip=127.0.0.1 resp=<hidden> Jan 2 23:50:20 michel dovecot: auth(default): pam(michel,127.0.0.1): lookup service=dovecot Jan 2 23:50:20 michel dovecot: auth(default): client out: OK 1 user=michel Jan 2 23:50:20 michel dovecot: auth(default): master in: REQUEST 1 18306 1 Jan 2 23:50:20 michel dovecot: auth(default): master out: USER 1 michel uid=503 gid=503 Jan 2 23:50:20 michel dovecot: POP3(michel): Loading modules from directory: /usr/lib64/dovecot/pop3 Jan 2 23:50:20 michel dovecot: pop3-login: Login: user=<michel>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured Jan 2 23:50:20 michel dovecot: POP3(michel): Module loaded: /usr/lib64/dovecot/pop3/lib10_quota_plugin.so Jan 2 23:50:20 michel dovecot: POP3(michel): Effective uid=503, gid=503 Jan 2 23:50:20 michel dovecot: POP3(michel): maildir: data=/var/spool/virtualmail//michel Jan 2 23:50:20 michel dovecot: POP3(michel): maildir: root=/var/spool/virtualmail//michel, index=/var/spool/virtualmail//michel, control=, inbox= Dovecot detect the username , but no detect the part domain that i need to build the path to maildir. Use ldap (active directory) to retrieve the mail attribute which specifies the address of my mail users. I ask, as I could do with pam. As I get the attribute mail with pam mail_location = maildir:/var/storage/virtualmail/%d/%n So must be /var/spool/virtualmail/casa.co.cu/michel not /var/spool/virtualmail//michel ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

3 2

[Dovecot] Building path to maildir
by Michel Bulgado 02 Jan '08

02 Jan '08

I have the following situation and I need help from all you people I have dovecot 0.99.11 and i want to migrate to a superior version like dovecot 1.0 looking forward to implement quotas in my system , and use the function deliver with postfix. My Scenario is as follow Dovecot + LDAP (ADS) + postfix My actual version is : 0.99.11 This is my actual configuration: Protocols = imap pop3 imap_listen = * pop3_listen = * login_dir = /var/run/dovecot-login login = imap login = pop3 default_mail_env = maildir:/var/spool/virtualmail/%d/%n mbox_locks = fcntl auth = dovecot-auth auth_mechanisms = plain auth_default_realm = CASA.CULT.CU auth_userdb = ldap /etc/dovecot-ldap.conf auth_passdb = pam dovecot auth_user = root auth_verbose = yes auth_debug = yes dovecot-ldap.conf hosts = ldap.casa.cult.cu base = ou=CASA,dc=casa,dc=cult,dc=cu dn = cn=unix-conector,cn=Users,dc=casa,dc=cult,dc=cu dnpass = ***** ldap_version = 3 deref = never scope = subtree user_global_uid = 500 user_global_gid = 500 user_attrs = mail,/var/spool/virtualmail/%d/%n,,,, user_filter = (&(objectClass=user)(!(objectClass=computer))(sAMAccountName=%n)) I see many changes in this new version. One of them is : -Renamed default_mail_env to mail_location - many changes in ldap queries With the new version my problem is when to dovecot tries to detect or builds the way where it´s stored the mailbox of my users. In /var/spool/virtualmail/%d/%u , it does not detect the domain when asking to my active directory (w2k) and consequently takes a value of my default realm = casa.cult.cu in this case the default domain where authenticate my users. My configuration in the new version of dovecot: protocols = imap pop3 protocol imap { listen = * } protocol pop3 { listen = * } login_dir = /var/run/dovecot/login login_chroot = yes login_greeting = Dovecot ready. mail_location = maildir:/var/spool/virtualmail/%d/%u mail_debug = yes mbox_read_locks = fcntl mbox_write_locks = fcntl protocol imap { mail_plugins = quota imap_quota } protocol pop3 { mail_plugins = quota } protocol lda { postmaster_address = postmaster(a)example.com mail_plugins = quota auth_socket_path = /var/run/dovecot/auth-master } auth_executable = /usr/libexec/dovecot/dovecot-auth auth_verbose = yes auth_debug = yes auth default { mechanisms = plain passdb pam { args = dovecot } userdb ldap { args = /etc/dovecot-ldap.conf } userdb prefetch { } user = root socket listen { master { path = /var/run/dovecot/auth-master mode = 0600 user = virtualmail group = virtualmail } } } dict { } plugin { quota = maildir:storage=10240 } user_attrs = mail,/var/spool/virtualmail/%d/%n,,,, The attribute mail in the old version returns to me user(a)casa.com or user(a)casa.cult.cu this way dovecot can build the way with no problems at all. But in this late version something is happening, it only takes the value %n= user , but not %d = domain . It´s not working. do you have any idea how I can solve this I beg your pardon for my poor English. ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

2 1