- dovecot - dovecot.org

[Dovecot] Duplicate emails with several clients
by Erick Perez 10 May '07

10 May '07

Hi, I'm using Centos 4.4 (which is redhat linux but free) that comes with dovecot-0.99.11-4.EL4. I have done a clean reinstall of the server and I have users reporting that everytime they hit "send/receive" in their outlook or outlook express software, they get the same messages, as well as the new ones, over and over again. I use postfix + dovecot and only the pop3 protocol. My dovecot.conf has the following relevant entries default_mail_env = mbox:~/mail/:INBOX=/var/mail/%u client_workarounds = oe6-fetch-no-newmail outlook-idle outlook-pop3-no-nuls mbox_locks = fcntl everything else is at default value. Also, we do not upgrade dovecot because it is not part of the upstream provider, and we do not want to break binary compatibility updates. Thanks for your guidance. -- ------------------------------------------------------------ Erick Perez Panama Sistemas Integradores de Telefonia IP y Soluciones Para Centros de Datos Panama, Republica de Panama Cel Panama. +(507) 6694-4780 ------------------------------------------------------------

2 3

[Dovecot] Managesieve: first steps
by Joseba Torre 10 May '07

10 May '07

Hi, I'm trying to get managesieve to work but, as usual, I have some issues... - First of all, the compilation process after applying the patch is a bit strange. I've used this way (i'm using centOS 4 for this pre-tests): $ tar zxvf dovecot-1.0.0.tar.gz $ cd dovecot-1.0.0 $ gzip -cd ../dovecot-1.0.rc28-MANAGESIEVE-v4.diff.gz | patch -p1 $ autoreconf (This ends with an error about missing ./ylwrap) $ automake --add-missing (This copies ylwrap to ., but fails if executed before autoreconf) $ autoreconf $ ./configure && make && sudo make install but I'm quite sure that should exist a better way... - After this, adding protocols = imap imaps pop3 pop3s managesieve and protocol managesieve { listen = *:2000 login_executable = /usr/local/libexec/dovecot/managesieve-login mail_executable = /usr/local/libexec/dovecot/managesieve } to dovecot.conf, everything seems to work fine (pop3 and imap work as usual, and I can connect to the managesieve port), but dovecot -n gives no output. (If I put out managesieve from the protocols, dovecot -n gives the normal output again). (This output is appended at the end) - Finally, I'm using Plain as the authentication mechanism, and I've been unable to connect using kmail or the sieve extension for thunderbird. As I'm not sure if any of these really work, I'll setup horde for further testing. Is there anything that I should be aware of? dovecot -n output: # /usr/local/etc/dovecot.conf syslog_facility: local1 protocols: imap imaps pop3 pop3s listen(default): *:143 listen(imap): *:143 listen(pop3): *:110 ssl_listen(default): *:993 ssl_listen(imap): *:993 ssl_listen(pop3): *:995 ssl_cert_file: /usr/share/ssl/certs/dovecot-beta.pem ssl_key_file: /usr/share/ssl/certs/dovecot-beta.pem login_dir: /usr/local/var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login mail_location: maildir:~/Maildir:INDEX=/var/dovecot/%u:CONTROL=/var/dovecot/%u mmap_disable: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %v.%u auth default: master_user_separator: * passdb: driver: passwd-file args: /usr/local/etc/dovecot-master.conf master: yes passdb: driver: pam args: blocking=yes userdb: driver: passwd args: blocking=yes socket: type: listen client: master: path: /var/run/dovecot/auth-master plugin: quota: fs Thanks. -- Joseba Torre. CIDIR Bizkaia.

1 0

[Dovecot] removing old emails
by Ray 10 May '07

10 May '07

Hello, I need to remove mail older than for example 30 days. Email is stored in maildir format. can I just use a cron job and shell script or will that mess up indexs? Thanks Ray

3 3

[Dovecot] Dovecot and horde issues
by John H. Bennett III 10 May '07

10 May '07

Hello, First time poster to this list, please be kind. I am having difficulties trying to get the current stable version of horde's imp webmail to work correctly using dovecot 1.0rc15. I am using a pre-release version of SME Server 8 which runs on top of CentOS 5. I have also tried using the 1.0 release of dovecot as well. What is happenning is that when I login to imp, I don't see any folders. I can create folders in imp which do get created in my Maildir directory, but I can't see them. If I revert back to dovecot-0.99.14-1.2, then I am able to see my folders. I have been looking in the wiki at the steps needed to upgrade from 0.99 to 1.0 and I thought everything had been taken care of, but since things aren't working, I have overlooked something. I also browsed the archives and see that others are using horde with various dovecot 1.x releases, so I know it should be possible to get it to work. My dovecot.conf currently only as the below, which works fine for 0.99: maildir_copy_with_hardlinks = no my /etc/pam.d/dovecot has: more /etc/pam.d/dovecot #%PAM-1.0 auth required pam_nologin.so auth include system-auth account include system-auth session include system-auth imp servers.php: $servers['_prompt'] = array( 'name' => 'Choose a mail server:' ); $servers['thebennetthome2.com'] = array( 'name' => 'IMAP Server', 'server' => 'localhost', 'protocol' => 'imap/notls', 'port' => '143', 'maildomain' => 'test.com', 'smtphost' => 'localhost', 'realm' => 'test.com', 'preferred' => '' ); php -v PHP 5.1.6 (cli) (built: Apr 9 2007 03:37:21) Copyright (c) 1997-2006 The PHP Group Zend Engine v2.1.0, Copyright (c) 1998-2006 Zend Technologies I do get some php errors when logging into horde, and a lot of php errors when creating folders that I can post if needed. I did post my issue to the horde list as well, but there has been no answer to date. Please let me know what other information is needed to assist me with fixing this issue. Thank you very much, John Bennett Thanks, John H. Bennett III bennettj(a)johnbennettservices.com

3 4

[Dovecot] Email client dowloads previously read messages as new during migration.
by Eric and Barbara Sammons 09 May '07

09 May '07

I am migrating from UW to dovecot and using mbox. I have been able to find mbox to maildir migration information and tools; however, I have had little luck finding any tool or information for performing such a migration where I wish to keep mbox. ( I know I should migrate to MailDir, but in the case I wish to take baby steps.) I have setup dovecot pop3 communication and I go to my email client and everything works fine with the exception that all mail I have previously read (when using UW as my POP server) is downloaded again as NEW. Is there a way to prevent this from happening without setting my client to delete mail from server? thank you!

4 3

[Dovecot] Troubleshooting enhancement request...
by Charles Marcus 09 May '07

09 May '07

Hi Timo, You were good enough to add the -n flag to the dovecot command to output the current *changed* config parameters (changed as compared to the defaults) of the running dovecot process. This makes it much easier to troubleshoot issues - thanks! Another flag that postfix has is the -d flag (postconf -d). This one outputs all of the DEFAULTS of the current running postfix process/version. I just used this today to compare what I had in my main.cf to what the defaults were - and for some reason I had uncommented a bunch of things that didn't need to be uncommented (because they were the default setting), resulting in a much larger output from the postconf -n command. I know its not a big deal, but any chance of implementing this for dovecot? This would make it easy to keep the conf file (and the -n output) clean and neat. Many, many thanks for 1.0.0! -- Best regards, Charles

2 2

[Dovecot] Trying to modify the source - fopen problems
by Phillip T. George 09 May '07

09 May '07

Hello all, I don't know if this needs to be sent to a different list or not, if so, please let me know. Anyways, I'm trying to modify the dovecot source a bit, but the problem I'm having is that whenever I use "fopen", it always returns NULL. I've tried a variety of things, even fopen("/dev/null", "w") -- because that should almost always work. I'm trying to get it to work in src/pop3-login/client-authenticate.c Any idea why this might be happening? Any suggestions as to where to put the code instead? (I'm trying to check the username against some information in a file OR pass the username to a process and have it do the work) Thanks, Phillip

2 1

[Dovecot] Inconsistent Mailbox with Eudora as POP3 client
by Amon Ott 09 May '07

09 May '07

Hello everyone, one of our customers using QUALCOMM Windows Eudora Version 7.1.0.9 as POP3 client with Dovecot 1.0.0 under Linux using Maildirs reports that on various accounts they get occasional "inconsistent mailbox" errors at quit. The same Docevot binary in the same environment on other servers works fine for several other customers and ourselves. We use Postfix 2.2 with Dovecot deliver and Sieve plugin, nothing else touches the Maildirs. I have no idea what goes wrong there, I already suspected memory corruptions. The system is low on memory and uses some swap (more memory soon), does that trigger such problems? The Eudora log shows: <Dominant>, Shutting down POP connection, QUIT [08:54:07 AM] There has been an error transferring your mail. I said: QUIT and then the POP3 server (xyz(a)my.domain.de) said: ERR Mailbox is in inconsistent state, please relogin. The mail syslog shows e.g.: Apr 27 08:50:26 gateway dovecot: POP3(mk): Disconnected: Mailbox is in inconsistent state. top=0/0, retr=0/0, del=0/715, size=20210522 # /etc/dovecot/dovecot.conf log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login first_valid_uid: 440 mail_extra_groups: mail maildir_copy_with_hardlinks: yes mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv auth default: user: dovecot-login verbose: yes passdb: driver: pam userdb: driver: passwd socket: type: listen client: path: /var/run/dovecot/auth-client mode: 432 master: path: /var/run/dovecot/auth-master mode: 384 plugin: quota: fs Amon Ott -- Amon Ott - m-privacy GmbH Am Köllnischen Park 1, 10179 Berlin Tel: +49 30 24342334 Fax: +49 30 24342336 Web: http://www.m-privacy.de Handelsregister: Amtsgericht Charlottenburg HRB 84946 Geschäftsführer: Dipl.-Kfm. Holger Maczkowsky, Roman Maczkowsky GnuPG-Key-ID: EA898571

2 1

[Dovecot] Hot to get rid of \"DON\'T DELETE THIS MESSAGE\" messages?
by foxx＠freemail.gr 09 May '07

09 May '07

I'm using Dovecot 1.0.0 (mbox) with Postfix 2.4 on my FreeBSD box, as a pop3-only server (imap is disabled). All account mailboxes are accessed using Outlook clients. I've noticed that, whenever I'm retrieving mail with pop3, a "DON'T DELETE THIS MESSAGE" is created in mbox. Although these messages are never sent to client MUAs, I found them very annoying. BTW I don't use (or used before) UW or Pine or any other c-client, therefore I assume it's a Dovecot issue. Previously I was using Cyrus and never had such a problem. Any idea how this can be fixed? FreeBSD 6.2 Release, Postfix 2.4, Dovecot 1.0.0 dovecot -n report: base_dir: /var/run/dovecot/ protocols: pop3 listen: * ssl_disable: yes disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable: /usr/local/libexec/dovecot/pop3-login login_process_per_connection: no login_processes_count: 1 login_max_processes_count: 10 verbose_proctitle: yes first_valid_uid: 2000 last_valid_uid: 2999 first_valid_gid: 2000 last_valid_gid: 2000 mail_extra_groups: mail mail_location: mbox:/var/empty/:INBOX=/var/mail/%u:INDEX=MEMORY dotlock_use_excl: yes mbox_read_locks: flock mbox_write_locks: flock mail_executable: /usr/local/libexec/dovecot/pop3 mail_plugin_dir: /usr/local/lib/dovecot/pop3 pop3_no_flag_updates: yes pop3_uidl_format: %08Xu%08Xv pop3_client_workarounds: outlook-no-nuls oe-ns-eoh auth default: default_realm: domain.com username_format: %n passdb: driver: passwd userdb: driver: passwd socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: regards, Athan

2 1

[Dovecot] sporadic slow/non response, problems copying to sent folder
by Danno Coppock 09 May '07

09 May '07

After experiencing these symptoms through many of the release candidates, we've been at v1.0.0 now for a few weeks, and they're still there. Perhaps a config issue with my setup (mbox locks?). It's really too disrupting to continue using this way. I've included symptoms, client info, mta info, log entries and config file. What other information can I provide? Please advise. Thanks, Danno symptoms: 1. Coming back to the idle client, and clicking on a newly arrived message, often a long delay (seems like minutes, sometimes) will occur before the message loads from the server. 2. Sending messages, as often as not, the client will stall, sometimes indefinitely, on "copying message to sent folder". client: * usually not more than 2-3 clients running at any time. * Thunderbird 1.5.0.10 (on XP) * Thunderbird 1.5.0.5 (on FreeBSD 5.5) mta: * Sendmail 8.13.6/8.13.6 * $sudo sendmail -bt -d0.10 < /dev/null | grep HASFLOCK OS Defines: BSD4_4_SOCKADDR HASFCHOWN HASFCHMOD HASFLOCK === log entries May 3 21:27:09 tejas dovecot: imap-login: Login: user=<annie>, method=PLAIN, rip=71.216.71.193, lip =68.224.168.249, TLS May 3 21:28:00 tejas dovecot: IMAP(annie): Disconnected May 3 21:28:01 tejas dovecot: imap-login: Login: user=<annie>, method=PLAIN, rip=71.216.71.193, lip =68.224.168.249, TLS May 3 21:32:08 tejas dovecot: IMAP(annie): Disconnected for inactivity May 3 21:37:01 tejas dovecot: IMAP(annie): Disconnected May 3 21:37:02 tejas dovecot: imap-login: Login: user=<annie>, method=PLAIN, rip=71.216.71.193, lip =68.224.168.249, TLS May 3 21:37:55 tejas dovecot: IMAP(annie): Disconnected in IDLE May 3 21:38:18 tejas dovecot: IMAP(annie): Disconnected in IDLE May 3 21:56:02 tejas dovecot: imap-login: Login: user=<danno>, method=PLAIN, rip=71.216.71.193, lip =68.224.168.249, TLS May 3 21:56:17 tejas dovecot: IMAP(annie): Disconnected for inactivity May 3 21:58:32 tejas dovecot: IMAP(danno): Disconnected May 3 22:02:31 tejas dovecot: imap-login: Login: user=<danno>, method=PLAIN, rip=71.216.71.193, lip =68.224.168.249, TLS May 3 22:03:14 tejas dovecot: imap-login: Login: user=<danno>, method=PLAIN, rip=71.216.71.193, lip =68.224.168.249, TLS May 3 22:14:10 tejas dovecot: IMAP(annie): Disconnected May 3 22:14:38 tejas dovecot: IMAP(danno): Disconnected in IDLE May 3 22:16:24 tejas dovecot: imap-login: Login: user=<danno>, method=PLAIN, rip=71.216.71.193, lip =68.224.168.249, TLS May 3 22:16:33 tejas dovecot: imap-login: Login: user=<annie>, method=PLAIN, rip=71.216.71.193, lip =68.224.168.249, TLS May 3 22:16:44 tejas dovecot: imap-login: Login: user=<annie>, method=PLAIN, rip=71.216.71.193, lip =68.224.168.249, TLS May 3 22:18:36 tejas dovecot: imap-login: Login: user=<annie>, method=PLAIN, rip=71.216.71.193, lip =68.224.168.249, TLS May 3 22:19:16 tejas dovecot: IMAP(danno): Disconnected May 3 22:19:17 tejas dovecot: imap-login: Login: user=<danno>, method=PLAIN, rip=71.216.71.193, lip =68.224.168.249, TLS ===== config $grep -E -v '^ *(#|$)' dovecot.conf protocols = imaps login_process_size = 64 default_mail_env = mbox:~/mail/:INBOX=/var/mail/%u mail_extra_groups = mail verbose_proctitle = yes first_valid_uid = 100 first_valid_gid = 0 mbox_read_locks = flock mbox_write_locks = flock protocol imap { imap_client_workarounds = delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep } protocol pop3 { pop3_uidl_format = %08Xu%08Xv pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } protocol lda { postmaster_address = postmaster(a)example.com sendmail_path = /usr/sbin/sendmail } auth default { mechanisms = plain passdb pam { } userdb passwd { } user = root } dict { } plugin { }

3 2