- dovecot - dovecot.org

[Dovecot] 1.0.alpha4 released
by Timo Sirainen 02 Nov '05

02 Nov '05

The actual alpha4 release this time. With a few changes since the pre-release. The important changes again: - Default lock_method changed to flock instead of the old fcntl. Solaris users will need to set it back to fcntl. This makes sure that Dovecot's indexes aren't accidentally used with NFS. - IMAP: We might have sent extra EXPUNGE messages when output buffer got full. This could have caused various sorts of very bad behavior. This is the main reason why everyone should upgrade as soon as possible. - POP3: We sent duplicate replies for LIST command when output buffer got full. Probably caused Thunderbird's duplicate deletion bugs? (Although I thought someone checked that Dovecot's reply was correct when the bug occurred?) - pop3_uidl_format setting is now required to be explicitly set in configuration file for pop3 to work at all. I want to get rid of the old default setting which breaks Outlooks, and simply changing the default would break existing setups. - Multiple passdbs and userdbs of same type can now be added with different parameters. Some people asked about this earlier. - Authentication cache works now with other than SQL and LDAP passdbs. Some passdbs such as PAM require some additional settings to work. See example config file. - Some other fixes to authentication cache related to failure handling and non-plaintext authentication. - deny passdb wasn't working for non-plaintext authentication. New changes since alpha4 pre-release: - imap/pop3 proxy feature was broken - fixed an assert-crash in ostream-file.c that was only in the pre-release And some more changes since alpha3 that I didn't mention before: - zlib plugin updated in http://dovecot.org/patches/1.0/zlib-plugin.tar.gz to be much faster than before - Added ssl_username_from_cert setting. Not actually tested yet, does it work? - epoll was broken with 64bit systems - Added deny password databases. - Dovecot can be run from inetd again - Index breakage/crashfix related to adding new keywords

9 29

[Dovecot] Cannot build rpm with mysql support from dovecot.spec
by Erick Perez 02 Nov '05

02 Nov '05

I've been playing for hours with the dovecot.spec file to build --with-mysql. The resulting RPM builds fine but when dovecot runs it does not recognize the passdb mysql statement. I also noted that the spec file has a version of 1.0-stable and rpmbuild complains about an invalid '-' in the version. Being a newbie in rpmbuild, can someone assist me in building for CentOS 4 on i386? standard build options but --with-mysql added. I also tried to install it from sources and it does not work (at least for me). Being a RPM user now I have to clean what the source installation did and i have no clue where the 'make install' placed files. BTW I am trying to build a manual (pdf, html) with the following config and im only stuck with dovecot, the other daemons are ready. Target Server: CentOS 4 with apache, postfix, mysql, dovecot, openwebmail,clamav, clamd, php,zlib,openssh, webmin and samba. All virtual running from mysql where possible, no local users no local storage (all to the mysql db/tables). Not wanted: postgresql, courier,vpopmail,kerberos,sasl,ssl (that might be in manual v2.0 if 1.0 ever sees the light) The system does not have X (no need for fancy graphs) file used: http://www.dovecot.org/nightly/stable/dovecot-stable-20051102.tar.gz RPMs Used: All RPMs that can be located in the CentOS 4 CDs so new users (like me) can do as much as needed without downloading. Devel RPMs: All devel (mysql, pam, openssl) are installed and they are recognized at building time. Your help will be appreciated in this task. Thanks, -- ------------------------------------------- Erick Perez Linux User 376588 http://counter.li.org/ (Get counted!!!) Panama, Republic of Panama

2 3

[Dovecot] failed to start
by Export TheGeek 02 Nov '05

02 Nov '05

greetings, I'm having a bit of trouble running dovecot, I receive the error; "Fatal: Can't create directory /usr/local/var/run/dovecot: No such file or directory" with an unmodified install save for disabling imap and allowing secure imap and pop3, I uncommented the base_dir in the .conf, although that did nothing. Does anybody have any suggestions? Many thanks, -Ex

2 1

[Dovecot] Error: auth(default): Unknown userdb type 'mysql'
by Erick Perez 02 Nov '05

02 Nov '05

Hi there, I have configured dovecot with mysql but when I restart (Redhat enterprise 4) the following error appears: dovecot: Nov 01 18:47:08 Info: Dovecot v1.0-stable starting up dovecot: Nov 01 18:47:09 Error: Auth process died too early - shutting down dovecot: Nov 01 18:47:09 Error: auth(default): Unknown userdb type 'mysql' dovecot: Nov 01 18:47:09 Error: child 30738 (auth) returned error 89 I have all RPMs for mysql installed, as well as mysql-devel. how can I verify that mysql support was correctly compiled in? sugestions? Thanks in advance.

1 0

[Dovecot] Problems with dual ldap auth
by Stian Jordet 01 Nov '05

01 Nov '05

Hi, I can't seem to figure this out. Is it impossible to use two different ldap auth? It works if I use one ldap and one pam, but I do need to use ldap for both. This is from my config: auth default { mechanisms = plain passdb ldap { args = /etc/dovecot/ldap-virtual.conf } passdb ldap { args = /etc/dovecot/dovecot-ldap.conf } userdb ldap { args = /etc/dovecot/ldap-virtual.conf } userdb ldap { args = /etc/dovecot/dovecot-ldap.conf } user = root #chroot = #count = 1 #ssl_require_client_cert = no } It works well if I only use one of them (so they seem to be correct), but together, only the last (dovecot-ldap) is used. Anyone see a reason for that? Best regards, Stian

2 3

[Dovecot] dovecot-lda - sieve notify support
by Sebastjan Trepca 01 Nov '05

01 Nov '05

Hi, does current implementation of dovecot-lda supports sieve script like this: require ["notify"]; if header :contains "from" "boss(a)example.org" { notify :high "This is probably very important"; } And if it does, what happens in this case ? Is there any configuration for other notification methods? I didn't notice anything in configuration file. Thanks, Sebastjan

1 0

[Dovecot] Usernames and Passwords for Virtual Users Request
by Matt 01 Nov '05

01 Nov '05

A feature I think would be nice. When a single IP hosts email for multiple domains the solution is usually to use the complete email address as the username. I have users that have migrated from Cobalt RAQ's which do not work like that. If a user trys to authenticate with just there username such as "joeb" instead of joeb(a)dirt.com I would like Dovecot to check all the domains it hosts and if it only finds one with the username "joeb" assume thats the one. If multiple domains have the username "joeb" refuse to authenticate without the "@domain" part. Perhaps this is not possible. Sure would be handy though. Oh, it would also be nice to automatically lowercase all usernames before authentication. Matt

4 4

[Dovecot] popa3d migration problem
by Janusz Batko 01 Nov '05

01 Nov '05

Hello, I tried to migrate from popa3d to dovecot but I couldn't manage with 'pop3_reuse_xuidl = yes' option. First of all it turned out that the feature is not supported in dovecot for Fedora Core 4 (dovecot-0.99.14-4.fc4). So I downloaded latest stable release of Dovecot but it didn't have this option included too. Then I compiled the newest alpha version (dovecot 1.0.alpha4) and I tried to login with 'pop3_reuse_xuidl = yes' option enabled and I've got in my logfile the following output: Nov 1 00:58:33 sneogg dovecot: pop3-login: Login: user=<test2>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured Nov 1 00:58:33 sneogg dovecot: pop3(test2): Set pop3_uidl_format setting in config file Nov 1 00:58:33 sneogg dovecot: child 32067 (pop3) returned error 89 And my session was disconnected immediately each time after sucessful authentication.. I tried to set up pop3_uidl_format to MD5 (%m) but it didn't work... Let me ask if there is a possibility to migrate from popa3d to dovecot (by using a proper patch maybe?)? I'd thankful for any response... Janusz

3 3

[Dovecot] errors after 1.0a3 -> 1.0a4
by Jakob Hirsch 31 Oct '05

31 Oct '05

Hi, somebody else seeing these? Oct 21 09:14:06 ymmv dovecot: imap-login: Login: user=<xxxx>, method=CRAM-MD5, rip=84.162.151.124, lip=85.214.25.134, TLS Oct 21 09:14:07 ymmv dovecot: imap-login: epoll_ctl(): No such file or directory Oct 21 09:14:07 ymmv dovecot: child 11419 (login) returned error 89 mailbox access fails after that. Had this already yesterday, then downgraded to alpha3 and it worked again, upgraded again and it kept working. Strange thing is, access through squirrelmail works perfect, but using Thunderbird gives these errors. I'm using maildir with epoll and inotify, if that matters.

3 7

[Dovecot] login_user & first_valid_uid
by Alexander Shikoff 30 Oct '05

30 Oct '05

Hi all, I have next settings in .conf file ... # # Login user for SQL-based virtual users # login_user = dovecot first_valid_uid = 100 first_valid_gid = 100 ... System user dovecot has UID/GID = 101/101. But every time when user logins I see in log file Oct 29 15:51:25 orion dovecot: Logins with login process UID 101 (user elnino) not permitted (see login_user in config file). Oct 29 15:51:25 orion dovecot: auth(default): Growing pool 'plain_auth_request' with: 1024 Why dovecot generate these warnings and how I can get rid of them? Thanks in advance, Alexander -- Kind Regards, Alexander Shikoff minotaur(a)crete.org.ua

4 8