- dovecot - dovecot.org

[Dovecot] Dovecot.conf
by Clovis Tristão 07 Dec '05

07 Dec '05

Hi, I am mounting a server of email with the Dovecot as MUA, i would like to restrict the access to imap and ipop to one determined range of IP. As I configure this in dovecot.conf, I did not understand the functioning of listen = * or [: ] Thanks a lot, Clovis -- Clóvis Tristão -------------------:-oo)---- Seja Legal, use GNU/Linux ----------------------------------------

2 2

[Dovecot] Tools to analyze status/stats?
by wolff 07 Dec '05

07 Dec '05

Hello, I recently installed dovecot on a server running Debian. I only have 10 users, but we probably have 6Gig of email between us. Things were working flawlessly for a couple of weeks, and I'm still getting email, but the last few days we are getting fewer emails that we typically do. So although things seem to be working well, everyone is suspicious something is wrong due to the lack of email volume. Is there a size limit that dovecot can manage? Are there any admin tools to get status messages for dovecot? Are there any reporting tools to show how many messages are processed/managed by dovecot? Thanks!!

8 9

[Dovecot] 1.0alpha4: pop3_reuse_xuidl patch
by grant beattie 06 Dec '05

06 Dec '05

hi all, this is needed to make the pop3_reuse_xuidl option work in 1.0alpha4. I am using maildir and I noticed that for each message which doesn't have an indexed X-UIDL header, the entire message is read from disk. as this is reading only headers, it is probably reasonable to stop reading at the end of the headers. it would also be neat if dovecot could be configured to only try reading X-UIDL headers from messages if the mailbox indexes don't exist, since I guess it would be common to want to preserve existing X-UIDLs but not bother for new messages (perhaps some mtime comparison, or something). opinions? I haven't looked at the source enough yet to be able to do this, but these two optimizations would vastly reduce the amount of disk IO as a result of using this option. grant. [apologies if this shows up twice, I originally sent it from an address which isn't subscribed, and it got held] --- src/pop3/commands.c.orig 2005-10-17 02:21:39.000000000 +1000 +++ src/pop3/commands.c 2005-11-09 15:26:15.000000000 +1100 @@ -567,6 +567,8 @@ mail_get_first_header(ctx->mail, "X-UIDL"); if (uidl == NULL) var_expand(str, uidl_format, tab); + else + str_append(str, uidl); ret = client_send_line(client, "%s", str_c(str)); t_pop();

2 5

[Dovecot] Unknown message data
by Paul 06 Dec '05

06 Dec '05

Running 1.0-alpha4 on Sarge, when I move a message with a blank subject from one mailbox into another, and then open that destination mailbox in Pine, Pine gives me the error "Unknown message data: 1001 FETCH", where 1001 is the UID of the message. Paul

2 2

[Dovecot] Struggling with namespaces...
by Kev Latimer 06 Dec '05

06 Dec '05

Hi all, I've been using dovecot 0.99x as a basic POP3/IMAP server at a couple of sites for a few months now and am very happy with it's simplicity, stability and performance, especially over the rather 'clunky' courier and the mammoth cyrus. I'm building up a top level mail server for our organisation and am desperate to use dovecot in there but I'm really struggling with using namespaces to create some shared maildirs - note that in this case I'm using the 1.0alpha4 debian packages that recently made it into 'etch'. I have very simple requirements here - I just want to be able to have some common folders subscribable by certain users, for my testing an announcements folder accessible by all and an archive folder I want to place some restrictions on. Whenever someone needs access to someone elses folder (ie. holiday watch), symlinking should be sufficient. I can start up dovecot, log in as a user (I authenticate against LDAP btw), see the directories specified in my namespace directives be created but I can't subscribe to anything. Squirrelmail gives an error stating "[TRYCREATE] Mailbox doesn't exist: archives" while Thunderbird shows the folder names in grey and refuses to subscribe. Am I missing the point of namespaces or have I failed to create something in the folders to get them to play? I read something about a dovecot-shared file but I think this is a 0.99 thing, although I tried creating the file with the permissions I wanted applied to the folder and it didn't do anything... I did notice that when the folders are created, they are created owned by the first user logged in. I have tried chmod'ing them to 777 to see if it makes a difference, but alas, no. The relevant bit of dovecot.conf is: namespace private { separator = / #prefix = #location = inbox = yes #hidden = yes } namespace public { separator = / prefix = announcements/ location = maildir:/var/mail/announcements/Maildir } namespace shared { separator = / prefix = archives/ location = maildir:/var/mail/archives/Maildir } I'm sure I'm just being picky, but a better explanation of namespaces in the docs might be in order, maybe with some examples. If I get this sussed out, I'll put one in the wiki ;) Any help much appreciated! Kev

2 1

[Dovecot] 1.0.alpha4 process creation wierdness
by Mark Rosenstand 06 Dec '05

06 Dec '05

Hi list! I'm a little confused. I have set "login_process_per_connection = yes" and "login_processes_count = 1", and this is how my pstree looks when nobody is connected: dovecot -,- dovecot-auth `- imap-login However, when I connect with a client it looks like this: dovecot -,- dovecot-auth |- imap `- 2*[imap-login] I would expect it to only have one imap-login running. Anyway, when I disconnect the client, the imap process exits but imap-login keeps running: dovecot -,- dovecot-auth `- 2*[imap-login] This is when it gets really wierd. When I connect a client again, my pstree looks like I would have expected it to on my first connect: dovecot -,- dovecot-auth |- imap `- imap-login If I re-connect, we start over again (i.e. dovecot-auth, imap, 2 * imap-login). Anybody got a clue what's going on? :-) -- .-. Mark Rosenstand (-.) oo| cc ) /`'\ (+45) 255 31337 3-n-( (\_;/) mark(a)borkware.net _(|/`->

2 3

[Dovecot] Feature/bug starting from xinetd
by Geoffrey S. Mendelson 06 Dec '05

06 Dec '05

Hi, I hate to have my first post be a bug, but this drove me crazy for a while. I compiled the latest version from source and followed the instalation instructions. I then copied the xinetd.d entries from the Wiki and proceded to test. No matter what I did I could not log on. I found that while I was editing /usr/local/etc/dovecot.conf, nothing was hapening. I then started it manualy and found several errors in my editing. :-) After fixing the errors and getting it to work properly, I went back to running it from xinetd. It would not allow me to log on, nor would it use any of the loging options I set. After making a symlink from /usr/local/etc/dovecot.conf to /etc/dovecot.conf, it worked perfectly. My suggestions: 1. Change the Wiki to point out the difference in the config file location. 2. Change the inetd version to default to /usr/local/etc. 3. Add (and/or document) an option to the inetd version to specify config file location. Thanks, Geoff. ( A very happy Dovecot user, thanks for a good product). -- Geoffrey S. Mendelson, Jerusalem, Israel gsm(a)mendelson.com N3OWJ/4X1GM IL Voice: (07)-7424-1667 IL Fax: 972-2-648-1443 U.S. Voice: 1-215-821-1838 You should have boycotted Google while you could, now Google supported BPL is in action. Time is running out on worldwide radio communication.

2 1

[Dovecot] New Install Assistance
by Cliff Hayes 06 Dec '05

06 Dec '05

Hello, I built a Fedora 4 sendmail server to replace our old one. I wanted to try the stock Dovecot popper (we currently use pop3d). I tried implementing Dovecot this morning and failed. All I want to use is the POP portion (no IMAP). From what I could find on the Internet, all I had to do is change dovecot.conf protocols line to read like this: protocols = pop3 Apparently, that wasn't enough. Here are the errors I saw in maillog: Oct 31 07:54:23 sendmail dovecot: child 25511 (pop3) returned error 89 Oct 31 07:54:24 sendmail pop3(cliffhayes): mbox: Can't create root IMAP folder /home/cliffhayes/mail: Permission denied Oct 31 07:54:24 sendmail pop3(cliffhayes): MAIL environment missing and autodetection failed (home /home/cliffhayes) Now, I did find out that I had a permissions problem with /var/spool/mail (I had done an SCP of all our users to var/spool/mail on new box). All user mailboxes had root/root as user/group. I know how to fix that for next time, but why is it trying to use a home directory (we don't use those)? And what MAIL environment is missing? Do I need to mess with the following settings: # default_mail_env = maildir:/var/mail/%1u/%u/Maildir # default_mail_env = mbox:~/mail/:INBOX=/var/mail/%u # default_mail_env = mbox:/var/mail/%d/%n/:INDEX=/var/indexes/%d/%n Thanks, Cliff

2 1

[Dovecot] Big quota problem
by Riccardo Bini 06 Dec '05

06 Dec '05

Hi, I'm using dovecot 1.0a3. I setup my system with quota filesystem. If a user is over quota and he try to read the email in pop3 dovecot return the following error: Oct 14 18:51:59 blackhole dovecot: pop3(user): write_full(/home/user/Maildir/dovecot-uidlist.lock) failed: Disk quota exceeded I think it's a big problem. Rick

3 5

[Dovecot] Dovecot and loadbalancer
by Cyril Feraudet 06 Dec '05

06 Dec '05

Hi all, I've 4 servers with dovecot and ldap authentication behind a loadbalancer (Alteon). To connect to dovecot, client need to use a vip of the loadbalancer. To connect to the ldap server, dovecot need to use the loadbalancer cause there are several ldap server. The loadbalancer close a connection without activity during 30mn Dovecot lauch several authentication process who have a connection to the ldap server each. Each client (user) have several imap connection to dovecot. I've 2 problemes : - If a client (thunderbird for ex.) don't use a connection during 30mn, the loadbalancer delete this connection from his connection table and the client seem not able to correctly reopen another - If a dovecot authentication proccess want to request ldap but haven't do it in the last 30mn, it fail an say that the authentification fail. Somebody have already use dovecot in a redundent environnement ? Have you an idea to solve these problems Thanks, Cyril Feraudet

3 3