- dovecot - dovecot.org

Trying to install Mailcrypt, receive completely blank emails
by sewing 22 Aug '19

22 Aug '19

Hi - perhaps someone can help me. Starting from a good and well-functioning mailserver setup, I have installed MailCrypt as per the instructions (I think) to have the per-user passworded keys setup. dovecot.conf /Added:/ mail_attribute_dict = file:%h/Maildir/dovecot-attributes mail_plugins = $mail_plugins mail_crypt dovecot-sql.conf.ext /commented this/ #password_query = SELECT email as user, password FROM virtual_users WHERE email='%u'; /Added this/ password_query = SELECT \ email as user, password, \ '%w' AS userdb_mail_crypt_private_password \ FROM virtual_users WHERE email='%u'; 90-plugin.conf /Updated this section/ plugin { mail_crypt_curve = secp521r1 mail_crypt_save_version = 2 /Have also tried all configurations this option set /#mail_crypt_require_encrypted_user_key = yes } /The user is in the mailserver SQL database:/ | user | password | userdb_mail_crypt_private_password | +----------------------+------------------------------------------------------------------------------------------------------------+------------------------------------+ | user@domain | 4t63ttt36tttttt3rt6r763r76t8998t858t4y48ht4huu4hti.76876t847t47yt4ty478yt4wgwygfwffweggggggggggwy8yey83//FElgiApZU. | %w /I have reissued the keys as other problem resolutions have instructed to do, and I can see the new keys are active./ doveadm -o plugin/mail_crypt_private_password=(same password as user@domain when created in SQL) mailbox cryptokey generate -u user@domain -UR /I have restarted dovecot and postfix each time./ /I then send an email either from the user@domain > user@domain OR otheruser@otherdomain > user@domain from Outlook. Authentication is fine (POP and SMTP). No errors appear in any logs - the logs show the mail as being received and I can see the mail in the user@domain /cur folder. If I try to Postcat any of these messages I get:/ postcat '1*********2.M**********3.(host),S=633,W=649:2,S' *** ENVELOPE RECORDS 1*********2.M*********3.(host),S=633,W=649:2,S *** message_size: YPTED postcat: fatal: invalid size record: YPTED??? */Within a minute or so I receive the email in the Outlook Inbox - except it is completely empty of anything. There is no TO / FROM/ SUBJECT / Body or even Routing information. See screencaps from Outlook/* <http://dovecot.2317879.n4.nabble.com/file/t5785/message_list_view.jpg> <http://dovecot.2317879.n4.nabble.com/file/t5785/empty-emails.jpg> /This happens with existing user mailboxes and new test mailboxes I create. If I deactivate Mailcrypt all mailboxes/user-accounts work fine. Any ideas??? I would like to get the working - thanks in advance for your expertise and time!/ Graham -- Sent from: http://dovecot.2317879.n4.nabble.com/

1 0

imapsieve suddenly not working anymore
by Thomas Stein 21 Aug '19

21 Aug '19

Hello one and all. Dovecot version 2.3.7.1 I've configured imapsieve like https://wiki.dovecot.org/HowTo/AntispamWithSieve a while a go and it worked for years now. Suddenly i noticed moving mails to the spamfolder does not trigger the report-spam.sieve script anymore. sieve-test gives: ~/.maildir/.Spam/cur $ sieve-test /usr/share/dovecot/sieve/report-spam.sieve 1542388745.M99384P16720.meine-oma.de\,S\=8173\,W\=8373\:2\,S -D sieve-test(himbeere): Debug: sieve: Pigeonhole version 0.5.7.1 (db5c74be) initializing sieve-test(himbeere): Debug: sieve: include: sieve_global is not set; it is currently not possible to include `:global' scripts. sieve-test(himbeere): Debug: sieve: Sieve imapsieve plugin for Pigeonhole version 0.5.7.1 (db5c74be) loaded sieve-test(himbeere): Debug: sieve: Sieve Extprograms plugin for Pigeonhole version 0.5.7.1 (db5c74be) loaded debug: file storage: Using Sieve script path: /usr/share/dovecot/sieve/report-spam.sieve. debug: file script: Opened script `report-spam' from `/usr/share/dovecot/sieve/report-spam.sieve'. debug: Script binary /usr/share/dovecot/sieve/report-spam.svbin successfully loaded. debug: binary save: not saving binary /usr/share/dovecot/sieve/report-spam.svbin, because it is already stored. report-spam: error: the imapsieve extension cannot be used outside IMAP. sieve-test(himbeere): Info: final result: failed; resolved with successful implicit keep ~/.maildir/.Spam/cur $ I'm not sure the "the imapsieve extension cannot be used outside IMAP" is the error already or thats only because the sieve-test script. Any ideas on that? cheers, t.

1 3

maildir very dirty sync option
by Yousif Alkhateeb 20 Aug '19

20 Aug '19

Hello , I have an active passive dovecot setup with glusterfs as a mail storage and using maildirs, we used to have a problem when users with large mailboxes sync their folders. This caused the load average to increase in the server , after a while we have enabled the very_dirty_sync option in dovecot , things got better and the problem disappeared but we need to know if there is any thing else that we need to do or know about the very_dirty_sync option that may cause future problems . Thanks in advance

3 2

Dovecot and Oauth
by Michael Hallager 20 Aug '19

20 Aug '19

Hi all, I am considering expanding a mail server to support Oauth with Google. I have read through the following: https://wiki.dovecot.org/PasswordDatabase/oauth2 however, it doesn't work and appears to me to be missing important information, the least of which is API authorisation. Searching with Google, I can't find any more information beyond what amounts to C&P'ing of the above link. Has anyone successfully deployed Oauth with Google and could they please send me their config files? Thanks, Michael

2 1

Dovecot and hard links?
by ＠lbutlr 18 Aug '19

18 Aug '19

I was looking at a mail folder and I noted that a file in the inbox had a total of 11 hard links to it: 👹 # exa -lH cur/1564249738.M167990P53982.mail.covisp.net,S=8572,W=8738:2,Sgl .rw------- 11 8.6k vpopmail 19 Jul 19:59 cur/1564249738.M167990P53982.mail.covisp.net,S=8572,W=8738:2,Sgl 👹 # find . -samefile cur/1564249738.M167990P53982.mail.covisp.net,S=8572,W=8738:2,Sgl [6:59] [/usr/local/virtual/kreme(a)kreme.com/Maildir] ./.Junk/cur/1564253637.M808919P50422.mail.covisp.net,S=8572,W=8738:2,bc ./.Junk/cur/1564253637.M808920P50422.mail.covisp.net,S=8572,W=8738:2,bc ./.Junk/cur/1564253723.M977674P50422.mail.covisp.net,S=8572,W=8738:2,bc ./.Junk/cur/1564253723.M977675P50422.mail.covisp.net,S=8572,W=8738:2,bc ./.Junk/cur/1564253723.M977676P50422.mail.covisp.net,S=8572,W=8738:2,bc ./.Junk/cur/1563587951.M591499P47868.mail.covisp.net,S=8572,W=8738:2, ./.Junk/cur/1564851795.M381461P10380.mail.covisp.net,S=8572,W=8738:2,bc ./.Junk/cur/1564851795.M381462P10380.mail.covisp.net,S=8572,W=8738:2,bc ./.Junk/cur/1564852369.M760020P10380.mail.covisp.net,S=8572,W=8738:2,bc ./.Trash/cur/1563587951.M591499P47868.mail.covisp.net,S=8572,W=8738:2,S ./cur/1564249738.M167990P53982.mail.covisp.net,S=8572,W=8738:2,Sgl A bit of background: a few weeks ago I had thousands of files in the mail store that had hundreds of links, and I got that all cleaned up through juggling some grep and awk to delete all but one of the linked files. I figured this was caused by something I’d done when I moved local users into being virtual users and eliminated pam authentication in favor of sql. But this gives me pause. I think it’s normal for a file in the INBOX that is marked as junk or as deleted to have a single hard link (or at least it is since the default was set to maildir_copy_with_hardlinks), but 11? And when do these hard links get cleaned off? If I delete the trashed and junked messages, when does dovecot go through and removed the linked files in the cur/ folder? (It’s not immediate, I trashed those copies in Junk and Trash and the original file is still in the cur folder) -- There is nothing so stupid that some person somewhere will not, with earnestness, say it.

3 5

Re: Submission and TLS client certificate
by Christian Rößner 18 Aug '19

18 Aug '19

Hi, > Am 18.08.2019 um 16:52 schrieb Stephan Bosch via dovecot <dovecot(a)dovecot.org>: > > > >>> On 18/08/2019 10:09, Christian Rößner via dovecot wrote: >> Hi, >> is there some configuration parameter in Dovecot, which sends a TLS client certificate to the SMTP server? I would need this to have XCLIENT enabled and TLS with Postfix. This way I could permit sending based on the certificates fingerprint. > > Can you elaborate? Are you talking about the submission relay service or submission of outgoing messages from e.g. Sieve? The submission relay service. I like the idea of this service. Currently I did not activate the relay trust option, because I have no idea on how I could give permissions on the Postfix side. If Dovecot would send the certificate as reply to the smtpd_ask_ccert option, I could turn on XCLIENT in Dovecot and give permission based on the certificate fingerprint. At the moment I do STARTTLS from Dovecot to Postfix and have added Dovecot‘s IP to mynetworks in Postfix. But I would prefer XCLIENT. Thanks in advance Christian > > Regards, > > Stephan. > >> Thanks in advance >> Christian >> Von unterwegs aus gesendet >> -- >> Rößner-Network-Solutions >> Karl-Bröger-Str. 10, 36304 Alsfeld <x-apple-data-detectors://0/0> >> Fax: +49 6631 78823409 <tel:+49%206631%2078823409>, Mobil: +49 171 9905345 <tel:+49%20171%209905345> >> USt-IdNr.: DE225643613, https://roessner.website <https://roessner.website/> >> PGP Fingerprint: 8FB3 132F 85D8 C9C7 A9F1 9A3F 5183 D46C B885 897E

1 0

Submission and TLS client certificate
by Christian Rößner 18 Aug '19

18 Aug '19

Hi, is there some configuration parameter in Dovecot, which sends a TLS client certificate to the SMTP server? I would need this to have XCLIENT enabled and TLS with Postfix. This way I could permit sending based on the certificates fingerprint. Thanks in advance Christian Von unterwegs aus gesendet -- Rößner-Network-Solutions Karl-Bröger-Str. 10, 36304 Alsfeld Fax: +49 6631 78823409, Mobil: +49 171 9905345 USt-IdNr.: DE225643613, https://roessner.website PGP Fingerprint: 8FB3 132F 85D8 C9C7 A9F1 9A3F 5183 D46C B885 897E

2 1

exim+dovecot+sieve issue
by JM 18 Aug '19

18 Aug '19

Hi, We have mail server in production, with Exim + Dovecot + Mailman + OpenLDAP + Roundcube webmail server. Openldap keeps mail accounts in db, exim uses lmtp transport to deliver messages to dovecot. Mailman is responsible for mailing lists, Roundcube webmail has managsieve module to create sieve filters. Exim router,transport for dovecot > localuser: > driver = accept > domains = +local_domains : +virt_domains > check_local_user > transport = dovecot_lmtp > cannot_route_message = Unknown account > no_more > dovecot_lmtp: > driver = lmtp > socket = /var/spool/dovecot/lmtp > batch_max = 500 > rcpt_include_affixes It worked perfectly, but after upgrade from Dovecot 2.2 to Dovecot 2.3 major version, I've found a lot of strange errors in exim panic.log > mail exim[7821] Failed to get user name for uid 1175 > mail exim[7880]: Failed to get user name for uid 1173 etc where uids are ldap accounts and recognized by system (id 1175 shows user's name and group) Even worse, some clients start to receive notify email with strange content, when sending email to mailing lists > user(a)domain.com > Delay reason: error in redirect data: malformed address: > someuser1(a)domain.com may not follow someuser2(a)domain.com in " > someuser3(a)domain.com ..some crap here.." , where someuser addresses are > not related to recipient address and unknown for sender. After some investigation,I've found out that dovecot's sieve produces these errors (I suspect sieve vacation, when user creates vacation via Roundcube webmail). If set "submission_host = exim ip" in dovecot.conf, exim doesn't produce errors in panic.log anymore, but clients still receive email with malformed address. Please help me to find the root of the problem (some broken sieve filter in user's maildir, misconfiguration or breaking changes in new Dovecot version?) Current software Gentoo with 4.14.90 kernel Dovecot-2.3.7.1 Exim-4.92.1 Mailman 2.1.29 Openldap-2.4.47 Roundcube-1.3.8 Dovecot.conf attached Regards, Juri

2 1

2.3.7 + stats
by Matt Bryant 17 Aug '19

17 Aug '19

Is there any additional documentation/information around the new stats module. Have added some metrics just to see what they produce ## ## Metrics ### metric imap { event_name = imap_command_finished #source_location = example.c:123 #categories = fields = name args running_usecs bytes_in bytes_out #filter { # field_key = wildcard #} } metric sql { event_name = sql_query_finished } metric auth { event_name = auth_request_finished fields = user transport error successful } and get the following [root@stargate dovecot]# doveadm stats dump metric_name field count sum min max avg median stddev %95 imap duration 370 2007904499 130 62955249 5426768.92 2068 16436817.37 60026465 imap name 370 0 0 0 0.00 0 0.00 0 imap args 0 0 0 0 0.00 0 0.00 0 imap running_usecs 370 2007865330 81 62955127 5426663.05 1991 16436816.76 60026329 imap bytes_in 370 5366 2 173 14.50 8 19.04 35 imap bytes_out 370 2119971 0 941517 5729.65 41 53760.89 2082 sql duration 18 28991 991 2305 1610.61 1660 377.36 2305 auth duration 12 26046980 8146 7079879 2170581.67 847730 2457811.23 7079879 auth user 12 0 0 0 0.00 0 0.00 0 auth transport 12 0 0 0 0.00 0 0.00 0 auth error 0 0 0 0 0.00 0 0.00 0 auth successful 0 0 0 0 0.00 0 0.00 0 the main wiki page on stats/events doesnt really hold much detail whats stores for each event the above fields dont make much sense and top no longer works out of the box [root@stargate dovecot]# doveadm stats top usage: doveadm [-Dv] [-f <formatter>] stats <command> [<args>] dump [-s <stats socket path>] [-r] [-f <fields>] has is been removed ? do you need to specify something additional now ??? rgds Matt

3 2

James spooling messages problem
by Adam Raszkiewicz 16 Aug '19

16 Aug '19

For some reason my James setup is creating some kind of spooling queue of sending messages. It will queue 3 of them and then forth “sent” message will make 1st one to be sent outside. Any thoughts? Thanks -- Adam

1 0