- dovecot - dovecot.org

Re: lda fails in parse_angle_addr if sieve is enabled
by Stephan Bosch 12 Apr '18

12 Apr '18

Hi, This code path is only executed when there is a return-path header. Given the fact that this fails consistently, can you provide an example of a message successfully delivered using an older version of Dovecot; i.e., as it is stored in the mailbox? There should be a return-path header there. Alternatively, you could temporarily wrap dovecot-lda in a shell script that copies the message to some file you can read after. I just need one example to confirm my suspicions. Regards, Stephan. Op 12-4-2018 om 11:54 schreef Leo Gaspard: > (sorry for the absence of In-Reply-To, I could neither find it on the ML > interface nor figure out a way to customize it in Thunderbird, and am > not subscribed) > > Just wanted to chime in to say I've hit the same issue with the upgrade > from 2.3.0.1 to 2.3.1. My setup is an opensmtpd sending mail to rspamd, > that then delivers to dovecot LDA. > > In the logs, I see (slightly reformated and censored): > > Panic: file message-address.c: line 147 (parse_angle_addr): assertion > failed: (*ctx->parser.data == '<') > Error: Raw backtrace: > /nix/store/[…]-dovecot-2.3.1/lib/dovecot/libdovecot.so.0(+[…]) […] > -> /nix/store/[…]-dovecot-2.3.1/lib/dovecot/libdovecot.so.0(+[…]) […] > -> /nix/store/[…]-dovecot-2.3.1/lib/dovecot/libdovecot.so.0(i_fatal+0) […] > -> /nix/store/[…]-dovecot-2.3.1/lib/dovecot/libdovecot.so.0(+[…]) […] > -> /nix/store/[…]-dovecot-2.3.1/lib/dovecot/libdovecot.so.0(+[…]) […] > -> > /nix/store/[…]-dovecot-2.3.1/lib/dovecot/libdovecot.so.0(message_address_parse_path+[…]) > […] > -> > /nix/store/[…]-dovecot-2.3.1/lib/dovecot/libdovecot-lda.so.0(mail_deliver_get_return_address+[…]) > […] > -> /etc/dovecot/modules/lib90_sieve_plugin.so(+[…]) […] > -> > /nix/store/[…]-dovecot-2.3.1/lib/dovecot/libdovecot-lda.so.0(mail_deliver+[…]) > [0x7f04e2d08e20] > -> /nix/store/[…]-dovecot-2.3.1/libexec/dovecot/deliver(main+[…]) […] > -> /nix/store/[…]-glibc-2.26-131/lib/libc.so.6(__libc_start_main+[…]) […] > -> /nix/store/[…]-dovecot-2.3.1/libexec/dovecot/deliver(_start+[…]) […] > > For some reason there are not many symbols, but hope that helps!

1 0

lda fails in parse_angle_addr if sieve is enabled
by Bernard Spil 12 Apr '18

12 Apr '18

Hi, Since updating to 2.3.1 on my FreeBSD mailserver mail delivery using lda is broken if I have sieve enabled. (Before updating this was 2.2 and pigeonhole 0.4) FreeBSD 11.1-p8 amd64 Dovecot 2.3.1 Pigeonhole 0.5.1 Mailflow is OpenSMTPd as MTA, using mda delivery to rspamc which utlimately delivers using dovecot-lda. smtpd.conf deliver to mda "rspamc -h scan --mime -e \"/usr/local/libexec/dovecot/deliver -d %{user.username}\"" %{user.username} is the local user after virtusers, aliases etc. verified using a shell wrapper and capturing the username. conf.d/15-lda.conf protocol lda { mail_plugins = $mail_plugins sieve } maillog: Apr 8 19:36:54 email smtpd[6390]: smtp-in: Accepted message 9db769b1 on session 81939f0d30337a47: from=<user1(a)example.org>, to=<user2(a)example.net>, size=2871, ndest=1, proto=ESMTP Apr 8 19:36:54 email smtpd[6390]: smtp-in: Closing session 81939f0d30337a47 Apr 8 19:36:55 email dovecot: lda(user2)<21091><Ljv6JzdTylpjUgAAWr0fMA>: Panic: file message-address.c: line 147 (parse_angle_addr): assertion failed: (*ctx->parser.data == '<') Apr 8 19:36:55 email smtpd[6390]: delivery: TempFail for 9db769b13edef5a7: from=<user1(a)example.org>, to=<user2(a)example.net>, user=bernard, method=mda, delay=1s, stat=Error ("") Apr 8 19:36:57 email smtpd[6390]: smtp-out: Closing session 81939f0c09f5140b: 1 message sent. Apr 8 19:37:04 email dovecot: lda(user2)<21102><vAChMkBTylpuUgAAWr0fMA>: Panic: file message-address.c: line 147 (parse_angle_addr): assertion failed: (*ctx->parser.data == '<') Apr 8 19:37:04 email smtpd[6390]: delivery: TempFail for 9db769b13edef5a7: from=<user1(a)example.org>, to=<user2(a)example.net>, user=bernard, method=mda, delay=10s, stat=Error ("") Removing sieve from mail_plugins configuration and restarting Apr 8 19:37:32 email dovecot: master: Warning: Killed with signal 15 (by pid=21106 uid=0 code=kill) Apr 8 19:37:32 email dovecot: imap(user2)<21085><WGCXullpKzasEQIC>: Server shutting down. in=774 out=5373 deleted=0 expunged=0 trashed=0 hdr_count=0 hdr_bytes=0 body_count=0 body_bytes=0 Apr 8 19:37:32 email dovecot: master: Dovecot v2.3.1 (8e2f634) starting up for imap, lmtp, sieve Apr 8 19:37:35 email dovecot: lda(user2)<21134><tNPZHl9TylqOUgAAWr0fMA>: msgid=<32984450d041e5c2f887bed5f6512c92(a)example.org>: saved mail to INBOX Apr 8 19:37:35 email smtpd[6390]: delivery: Ok for 9db769b13edef5a7: from=<user1(a)example.org>, to=<user2(a)example.net>, user=user2, method=mda, delay=41s, stat=Delivered Mail gets delivered. Don't understand why it is looking for a <>-address if sieve is enabled. Cheers, Bernard Spil.

2 6

two unrelated issues, lastlogin, and an out of memory fatal error
by David Mehler 11 Apr '18

11 Apr '18

Hello, I've got a few misc issues that I'm trying to get a handle on. I'm having what is probably a simple error with last logins. It's not working, unable to write values to the database. Here's the log lines: 2018-04-10 10:43:34 imap-login: Info: Login: user=<user(a)domain.com>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=75934, TLS, session=<db0EjH9pOix/AAAB> 2018-04-10 10:43:34 imap(user(a)domain.com)<75934><db0EjH9pOix/AAAB>: Error: last_login_dict: Failed to write value for user user(a)domain.com: dict-server returned failure: sql dict: commit failed: Field 'name' doesn't have a default value (reply took 0.013 secs (0.000 in dict wait, 0.012 in other ioloops, 0.000 in locks, async-id reply 0.002 secs ago, started on dict-server 0.005 secs ago, took 0.005 secs)) Here's an excerpt from my dovecot-dict-sql.conf.ext file: map { pattern = shared/last-login/$user table = accounts value_field = last_login value_type = uint fields { username = $user } } and the relevant database table: describe accounts; +------------+------------------+------+-----+---------+----------------+ | Field | Type | Null | Key | Default | Extra | +------------+------------------+------+-----+---------+----------------+ | id | int(10) unsigned | NO | PRI | NULL | auto_increment | | name | varchar(255) | NO | | NULL | | | username | varchar(64) | NO | MUL | NULL | | | domain | varchar(255) | NO | MUL | NULL | | | password | varchar(255) | NO | | NULL | | | quota | int(10) unsigned | YES | | 0 | | | enabled | tinyint(1) | YES | | 0 | | | sendonly | tinyint(1) | YES | | 0 | | | last_login | int(11) | YES | | NULL | | Second issue, I've used imapsync to download my gmail messages to dovecot. I am atempting to access these messages and getting: 2018-04-08 11:11:58 indexer-worker(user(a)domain.com)<44193><4GzoqFdpisJ/AAAB:StoZDD4xylqhrAAA0J78UA>: Info: Indexed 0 messages in INBOX 2018-04-08 11:11:58 indexer-worker(user(a)domain.com)<44193><4GzoqFdpisJ/AAAB:0AaXFD4xylqhrAAA0J78UA>: Info: Indexed 0 messages in INBOX 2018-04-08 11:11:58 indexer-worker(user(a)domain.com)<44193><4GzoqFdpisJ/AAAB:CP3TIT4xylqhrAAA0J78UA>: Info: Indexed 0 messages in INBOX 2018-04-08 11:11:58 indexer-worker(user(a)domain.com)<44193><4GzoqFdpisJ/AAAB:eNEWMT4xylqhrAAA0J78UA>: Info: Indexed 0 messages in INBOX 2018-04-08 11:15:28 imap(user(a)domain.com)<21374><4GzoqFdpisJ/AAAB>: Fatal: block_alloc(8388608): Out of memory 2018-04-08 11:15:28 imap(user(a)domain.com)<21374><4GzoqFdpisJ/AAAB>: Fatal: master: service(imap): child 21374 returned error 83 (Out of memory (service imap { vsz_limit=256 MB }, you may need to increase it) - set CORE_OUTOFMEM=1 environment to get core dump) when I atempt to do so. For completeness the imapsync command I used was: imapsync --host1 imap.gmail.com --user1 Username --password1 Password --host2 localhost --user2 username --password2 Password --ssl1 --useheader 'Message-Id' --regextrans2 's/\[Gmail\]/user\@domain/' Any help appreciated on either issue. Thanks. Dave. doveconf -n # 2.3.1 (8e2f634): /usr/local/etc/dovecot/dovecot.conf # Pigeonhole version 0.5.1 (d9bc6dfe) # OS: FreeBSD 11.1-RELEASE-p4 amd64 # Hostname: localhost auth_cache_size = 24 M auth_cache_ttl = 18 hours auth_default_realm = domain.com auth_mechanisms = plain login dict { acl = mysql:/usr/local/etc/dovecot/dovecot-dict-sql.conf.ext lastlogin = mysql:/usr/local/etc/dovecot/dovecot-dict-sql.conf.ext quota = mysql:/usr/local/etc/dovecot/dovecot-dict-sql.conf.ext } first_valid_gid = 999 first_valid_uid = 999 hostname = xxxx.xxxx.xxxx imap_idle_notify_interval = 10 mins last_valid_gid = 999 last_valid_uid = 999 lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes lda_original_recipient_header = X-Original-To listen = 127.0.0.1 xxx.xxx.xxx.xxx log_path = /var/log/dovecot/dovecot.log log_timestamp = "%Y-%m-%d %H:%M:%S " mail_access_groups = vmail mail_gid = vmail mail_home = /home/vmail/mailboxes/%d/%n mail_location = maildir:~/mail:LAYOUT=fs mail_plugins = acl mail_log notify quota trash virtual welcome zlib mail_privileged_group = vmail mail_server_admin = mailto:postmaster@davemehler.com mail_uid = vmail mailbox_idle_check_interval = 59 secs managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext spamtest spamtestplus virustest editheader imapflags notify imapsieve vnd.dovecot.imapsieve namespace { location = maildir:/home/vmail/public/:LAYOUT=fs:CONTROL=~/mail/public:INDEX=~/mail/public mailbox office { auto = subscribe comment = Public Folder for message sharing } prefix = public/ separator = / subscriptions = yes type = public } namespace inbox { inbox = yes location = mailbox Archives { auto = subscribe special_use = \Archive } mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Sent { auto = subscribe special_use = \Sent } mailbox Spam { auto = subscribe autoexpunge = 30 days special_use = \Junk } mailbox Trash { auto = subscribe autoexpunge = 30 days special_use = \Trash } mailbox virtual/All { comment = All my messages special_use = \All } prefix = separator = / type = private } namespace virtual { location = virtual:/usr/local/etc/dovecot/virtual:INDEX=~/virtual:CONTROL=~/virtual prefix = virtual/ separator = / } passdb { args = /usr/local/etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { acl = vfile:/usr/local/etc/dovecot/global-acls:cache_secs=300 acl_globals_only = yes acl_shared_dict = proxy::acl fts = lucene fts_autoindex = yes fts_autoindex_max_recent_msgs = 80 fts_index_timeout = 90 fts_lucene = whitespace_chars=@. normalize no_snowball imapsieve_mailbox1_before = file:/home/vmail/sieve/global/report-spam.sieve imapsieve_mailbox1_causes = COPY imapsieve_mailbox1_name = Spam imapsieve_mailbox2_before = file:/home/vmail/sieve/global/report-ham.sieve imapsieve_mailbox2_causes = COPY imapsieve_mailbox2_from = Spam imapsieve_mailbox2_name = * last_login_dict = proxy::lastlogin last_login_key = last-login/%n mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size quota = dict:User quota::proxy::quota quota_exceeded_message = Storage quota for this account has been exceeded, please try again later. quota_grace = 10%% quota_status_nouser = DUNNO quota_status_overquota = 552 5.2.2 Mailbox is full quota_status_success = DUNNO quota_vsizes = true quota_warning = storage=100%% quota-exceeded 100 %u quota_warning2 = storage=95%% quota-warning 95 %u quota_warning3 = storage=90%% quota-warning 90 %u quota_warning4 = storage=85%% quota-warning 85 %u quota_warning5 = storage=75%% quota-warning 75 %u sieve = ~/.dovecot.sieve sieve_before = /home/vmail/sieve/before.d sieve_default = /home/vmail/sieve/default.sieve sieve_dir = ~/sieve sieve_extensions = +notify +imapflags +spamtest +spamtestplus +virustest +editheader sieve_global_dir = /home/vmail/sieve sieve_global_extensions = +vnd.dovecot.pipe +vnd.dovecot.execute +vnd.dovecot.environment sieve_max_redirects = 30 sieve_max_script_size = 1M sieve_pipe_bin_dir = /home/vmail/sieve sieve_plugins = sieve_imapsieve sieve_extprograms sieve_spamtest_max_header = X-Spamd-Result: default: [[:alnum:]]+ \[-?[[:digit:]]+\.[[:digit:]]+ / (-?[[:digit:]]+\.[[:digit:]]+)\] sieve_spamtest_status_header = X-Spamd-Result: default: [[:alnum:]]+ \[(-?[[:digit:]]+\.[[:digit:]]+) / -?[[:digit:]]+\.[[:digit:]]+\] sieve_spamtest_status_type = score sieve_user_log = /home/vmail/sieve/sieve_error.log sieve_virustest_status_header = X-Virus-Scan: Found to be (.+)\. sieve_virustest_status_type = text sieve_virustest_text_value1 = clean sieve_virustest_text_value5 = infected trash = /usr/local/etc/dovecot/trash.conf welcome_script = welcome %u postmaster@%d welcome_wait = yes } postmaster_address = postmaster@xxx protocols = imap lmtp sieve sendmail_path = /usr/local/sbin/sendmail service auth-worker { user = vmail } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } unix_listener auth-userdb { group = vmail mode = 0666 user = vmail } } service dict { unix_listener dict { group = vmail mode = 0660 user = vmail } user = root } service imap-login { inet_listener imap { address = 127.0.0.1 } inet_listener imaps { address = xxx.xxx.xxx.xxx port = 993 ssl = yes } } service imap-postlogin { executable = script-login /usr/local/etc/dovecot/trackauth.sh user = vmail } service imap { executable = imap imap-postlogin } service lmtp { executable = lmtp unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0666 user = postfix } } service managesieve-login { inet_listener sieve { address = 127.0.0.1 port = 4190 } } service quota-status { client_limit = 1 executable = quota-status -p postfix unix_listener /var/spool/postfix/private/dovecot-quota { group = postfix mode = 0660 user = postfix } } service quota-warning { executable = script /usr/local/etc/dovecot/quota-warning.sh unix_listener quota-warning { group = vmail mode = 0660 user = vmail } user = vmail } service welcome { executable = script /usr/local/etc/dovecot/welcome.sh unix_listener welcome { user = vmail } user = vmail } ssl = required ssl_cert = </usr/local/etc/ssl/acme/davemehler.com/fullchain.pem ssl_cipher_list = ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256 ssl_dh = # hidden, use -P to show it ssl_key = # hidden, use -P to show it ssl_min_protocol = TLSv1.2 ssl_prefer_server_ciphers = yes userdb { args = /usr/local/etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol lmtp { info_log_path = /var/log/dovecot/dovecot-lmtp.log log_path = /var/log/dovecot/dovecot-lmtp-errors.log mail_plugins = acl mail_log notify quota trash virtual welcome zlib sieve } protocol lda { mail_plugins = acl mail_log notify quota trash virtual welcome zlib sieve } protocol imap { mail_max_userip_connections = 20 mail_plugins = acl mail_log notify quota trash virtual welcome zlib imap_acl imap_quota imap_sieve imap_zlib last_login fts fts_lucene } protocol sieve { info_log_path = /var/log/dovecot/dovecot-sieve.log log_path = /var/log/dovecot/dovecot-sieve-errors.log }

4 4

dovecot, imap sieve, roundcube markasjunk2 plugin
by David Mehler 10 Apr '18

10 Apr '18

Hello, Does anyone have the above combination going? Per the wiki: https://wiki.dovecot.org/HowTo/AntispamWithSieve I have configured Dovecot for imap sieve and rspamd setting up the learn sieve and shell scripts. This is working. Now i'd like to integrate roundcube's markasjunk2 plugin. Looking at it's config file I am uncertain as to which options to enable. If anyone has a working markasjunk2 roundcube config that works with dovecot and imap sieve i'd appreciate seeing it. Thanks. Dave.

1 0

IMAP_ID_LOG
by j.emerlik 10 Apr '18

10 Apr '18

Hi, there in configuration is possibile to set imap_id_log for logging Client ID e.g.: ID sent: name=Thunderbird, version=52.7.0. Is possible to set same but for POP3 or SMTP Auth ? Ideally, it would be possible to log in to the database e.g. using postlogin script. Regards, MattX

3 3

Filesystem level backups?
by Steve Atkins 09 Apr '18

09 Apr '18

Up until now I've been backing up my IMAP server by taking an atomic snapshot of the entire VM, so I've not really had to worry about it. I'm moving to hosting where I have neither VM snapshots nor a filesystem that can take snapshots, so I need to think about consistent backups a bit more. Will a simple backup of all the files of an multi-dbox give me a consistent state when I recover, or do I need to do something (e.g. lock writes to the mailbox) while I run a backup? (I could use doveadm backup if I were backing up to local storage I controlled, but I'm pushing it to offsite buckets so I'd prefer to avoid backing up the entire thing locally, then copying that offsite). Cheers, Steve

4 5

Raw Backtrace Error when backing up specific user
by Marius Fassbender 09 Apr '18

09 Apr '18

Hi, probably since the update to 2.3.1 I can't backup a specific users mailbox. For backup I use the command 'dsync -o plugin/quota= -f -u user@domain backup dbox:/backup/dir' When I execute this command with the -D option, I get to see (above only Debug messages) dsync(user@domain): Panic: file mailbox-attribute.c: line 362 (mailbox_attribute_get_stream): assertion failed: (value_r->value != NULL || value_r->value_stream != NULL) dsync(user@domain): Error: Raw backtrace: /usr/lib64/dovecot/libdovecot.so.0(+0xcc724) [0x7f0f15364724] -> /usr/lib64/dovecot/libdovecot.so.0(default_fatal_handler+0x2a) [0x7f0f1536476a] -> /usr/lib64/dovecot/libdovecot.so.0(i_fatal+0) [0x7f0f152d524b] -> /usr/lib64/dovecot/libdovecot-storage.so.0(+0x566ac) [0x7f0f156686ac] -> doveadm(dsync_mailbox_import_attribute+0x4d) [0x5581a663bf4d] -> doveadm(dsync_brain_sync_mails+0x2ef) [0x5581a66377ff] -> doveadm(dsync_brain_run+0x2b0) [0x5581a6632e90] -> doveadm(+0x2960c) [0x5581a661a60c] -> doveadm(+0x2b4f7) [0x5581a661c4f7] -> doveadm(+0x2c0dc) [0x5581a661d0dc] -> doveadm(doveadm_mail_try_run+0x205) [0x5581a661da75] -> doveadm(main+0x475) [0x5581a660cce5] -> /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f0f14ca3c05] -> doveadm(+0x1be65) [0x5581a660ce65] cancelled my dovecot -n output: # 2.3.1 (0580a21bf): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.1 (d9bc6dfe) # OS: Linux 3.10.0-693.21.1.el7.x86_64 x86_64 CentOS Linux release 7.4.1708 (Core) xfs doveconf: Warning: please set ssl_dh=</etc/dovecot/dh.pem doveconf: Warning: You can generate it with: dd if=/var/lib/dovecot/ssl-parameters.dat bs=1 skip=88 | openssl dhparam -inform der > /etc/dovecot/dh.pem auth_cache_negative_ttl = 0 auth_cache_size = 100 M auth_master_user_separator = * auth_mechanisms = login plain auth_verbose = yes auth_verbose_passwords = sha1:16 deliver_log_format = msgid=%m from=%f subject=%s psize=%p status=%$ first_valid_gid = 5000 first_valid_uid = 5000 hostname = imap_capability = +XLIST imap_client_workarounds = tb-extra-mailbox-sep tb-lsub-flags last_valid_gid = 5000 last_valid_uid = 5000 lmtp_rcpt_check_quota = yes lmtp_save_to_detail_mailbox = yes mail_attachment_dir = /storage/mail/attachments mail_attachment_hash = %{sha512} mail_gid = 5000 mail_home = /storage/mail/settings/%Ld/%Ln mail_location = sdbox:/storage/mail/mails/%Ld/%Ln mail_plugins = zlib quota acl listescape fts fts_lucene mail_server_admin = mailto:postmaster@domain mail_uid = 5000 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext imapsieve vnd.dovecot.imapsieve namespace { list = children location = sdbox:/storage/mail/mails/%%d/%%n prefix = shared/%%u/ separator = / subscriptions = no type = shared } namespace inbox { inbox = yes location = mailbox Archive { special_use = \Archive } mailbox Archives { special_use = \Archive } mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox "Gesendete Objekte" { special_use = \Sent } mailbox Junk { special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { auto = subscribe special_use = \Trash } prefix = separator = / subscriptions = yes type = private } passdb { args = /etc/dovecot/passwd.masterusers driver = passwd-file master = yes pass = yes } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { acl = vfile:/storage/mail/settings/global-acls:cache_secs=300 acl_shared_dict = file:/storage/mail/settings/shared-mailboxes fts = lucene fts_autoindex = yes fts_lucene = whitespace_chars=@. imapsieve_mailbox1_before = file:/usr/lib64/dovecot/sieve/report-spam.sieve imapsieve_mailbox1_causes = COPY imapsieve_mailbox1_name = Spam imapsieve_mailbox2_before = file:/usr/lib64/dovecot/sieve/report-ham.sieve imapsieve_mailbox2_causes = COPY imapsieve_mailbox2_from = Spam imapsieve_mailbox2_name = * mail_log_fields = uid box msgid size subject quota = dict:User quota::file:%h/dovecot-quota quota_grace = 5%% quota_rule = Trash:storage=+5%% quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u sieve = file:%h/sieve;active=%h/.dovecot.sieve sieve_execute_bin_dir = /usr/lib64/dovecot/sieve sieve_global_extensions = +vnd.dovecot.pipe +vnd.dovecot.execute sieve_pipe_bin_dir = /usr/lib64/dovecot/sieve sieve_plugins = sieve_imapsieve sieve_extprograms zlib_save = gz zlib_save_level = 6 } postmaster_address = postmaster@domain protocols = imap lmtp sieve service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0600 user = postfix } unix_listener auth-userdb { group = dovemail mode = 0600 user = dovemail } } service lmtp { inet_listener lmtp { address = 127.0.0.1 port = 24 } unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0600 user = postfix } } service managesieve-login { inet_listener sieve { port = 4190 } } service quota-warning { executable = script /usr/local/bin/quota-warning.sh unix_listener quota-warning { user = dovemail } user = dovecot } ssl = required ssl_cert = </etc/pki/tls/certs/cert.cer ssl_dh = # hidden, use -P to show it ssl_key = # hidden, use -P to show it userdb { args = /etc/dovecot/dovecot-ldap.conf.ext default_fields = master_user=%u driver = ldap } protocol lmtp { mail_plugins = zlib quota acl listescape fts fts_lucene sieve postmaster_address = postmaster@domain } protocol imap { mail_plugins = zlib quota acl listescape fts fts_lucene imap_acl imap_quota imap_sieve imap_zlib } I tried to rebuild the settings files of this mailbox by deleting them and restart the service but this didnt help. A reboot did neither. I dont know where to start fixing this problem, does anyone has an advice? Thanks in advance

1 0

Re: 2.3.1 Replication is throwing scary errors
by Reuben Farrelly 08 Apr '18

08 Apr '18

Hi, [Formatting is a bit rough, replying from a trimmed digest email] > Message: 1 > Date: Fri, 6 Apr 2018 15:04:35 +0200 > From: Michael Grimm <trashcan(a)ellael.org> > To: Dovecot Mailing List <dovecot(a)dovecot.org> > Subject: Re: 2.3.1 Replication is throwing scary errors > Message-ID: <E7E7A927-68F8-443F-BA59-E66CED8FE878(a)ellael.org> > Content-Type: text/plain; charset=utf-8 > > Reuben Farrelly wrote: >> From: Michael Grimm <trashcan(a)ellael.org> > >>> [This is Dovecot 2.3.1 at FreeBSD STABLE-11.1 running in two jails at distinct servers.] >>> I did upgrade from 2.2.35 to 2.3.1 today, and I do become pounded by error messages at server1 (and vice versa at server2) as follows: >>> | Apr 2 17:12:18 <mail.err> server1.lan dovecot: doveadm: Error: dsync(server2.lan): I/O has stalled, \ >>> no activity for 600 seconds (last sent=mail_change, last recv=mail_change (EOL)) >>> | Apr 2 17:12:18 <mail.err> server1.lan dovecot: doveadm: Error: Timeout during state=sync_mails \ >>> (send=changes recv=mail_requests) >>> [?] >>> | Apr 2 18:59:03 <mail.err> server1.lan dovecot: doveadm: Error: dsync(server2.lan): I/O has stalled, \ >>> no activity for 600 seconds (last sent=mail, last recv=mail (EOL)) >>> | Apr 2 18:59:03 <mail.err> server1.lan dovecot: doveadm: Error: Timeout during state=sync_mails \ >>> (send=mails recv=recv_last_common) >>> I cannot see in my personal account any missing replications, *but* I haven't tested this thoroughly enough. I do have customers being serviced at these productive servers, *thus* I'm back to 2.2.35 until I do understand or have learned what is going on. > > In my reply to this statement of mine I mentioned that I have seen those timeouts quite some times during the past year. Thus, I upgraded to 2.3.1 again, and boom: after some hours I ended up in hanging processes [1] like (see Remko's mail in addition) ... > > doveadm-server: [IP4/6 <USER1> SOME/MAILBOX import:0/0] (doveadm-server) > > ? at server2 paired with a file like ? > > -rw------- 1 vmail dovecot uarch 0 Apr 3 16:52 /home/to/USER1/.dovecot-sync.lock > > Corresponding logfile entries at server2 are like ? > > Apr 3 17:10:49 <mail.err> server2.lan dovecot: doveadm: Error: Couldn't lock /home/to/USER1/.dovecot-sync.lock: \ > fcntl(/home/to/USER1/.dovecot-sync.lock, write-lock, F_SETLKW) locking failed: Timed out after 30 seconds \ > (WRITE lock held by pid 51110) > > [1] Even stopping dovecot will not end those processes. One has to manually kill those before restarting dovecot. > > After one day of testing 2.3.1 with a couple of those episodes of locking/timeout, and now missing mails depending with server your MUA will connect to, I went back to 2.2.35. After two days at that version I never had such an episode again. > >> It's not just you. This issue hit me recently, and it was impacting >> replication noticeably. I am following git master-2.3 . > [...] >> There is also a second issue of a long standing race with replication >> occurring somewhere whereby if a mail comes in, is written to disk, is >> replicated and then deleted in short succession, it will reappear >> again to the MUA. I suspect the mail is being replicated back from >> the remote. A few people have reported it over the years but it's not >> reliable or consistent, so it has never been fixed. >> And lastly there has been an ongoing but seemingly minor issue >> relating to locking timing out after 30s particularly on the remote >> host that is being replicated to. I rarely see the problem on my >> local disk where almost all of the mail comes in, it's almost always >> occurring on the replicate/remote system. > > It might be time to describe our setups in order to possibly find common grounds that might trigger this issue you describe and Rimko and myself ran into as well. > > Servers: Cloud Instances (both identical), around 25ms latency apart. > Intel Core Processor (Haswell, no TSX) (3092.91-MHz K8-class CPU) > Both servers are connected via IPsec/racoon tunnels > OS: FreeBSD 11.1-STABLE (both servers) > Filesystem: ZFS > MTA: postfix 3.4-20180401 (postfix delivers via dovecot's LMTP) > IMAP: dovecot running in FreeBSD jails (issues with 2.3.1, fine with 2.2.35) > Replication: unsecured tcp / master-master > MUA: mainly iOS or macOS mail.app, rarely roundcube For me: Servers: Main: VM on a VMWare ESXi local system (light load), local SSD disks (no NFS) Redundant: Linode VM in Singapore, around 250ms away Also no NFS. Linode use SSDs for IO. There is native IPv6 connectivity between both VMs. As I am using TCPs I don't have a VPN between them - just raw IPv6 end to end. OS: Gentoo Linux x86_64 kept well up to date Filesystem: EXT4 for both MTA: Postfix 3.4-x (same as you) IMAP: Dovecot running natively on the machine (no jail/chroot) Replication: Secured TCP / master-master (but only one master is actively used for SMTP and MUA access) MUA: Thunderbird, Maildroid, MS Mail, Gmail client, Roundcube, LG Mail client on handset etc > I believe it is worthwhile to mention here that I run a poor man's fail-over approach (round-robin DNS) as follows: > > DNS: mail.server.tld resolves to one IP4 and one IP6 address of each server, thus 4 IP addresses in total For me I have a simple pair of servers that replicate mail to each other. Clients connect to the main server only, which is where mail comes in. The second one that experiences the problem with locking is only a redundant server which is a secondary MX, that only gets occasional SMTP deliveries from time to time. So the amount of replication back from the "secondary" is very minimal; the vast bulk of the replication is the primary replicating changes out. Reuben

1 0

changed behavior for dovecot-lda in 2.3.x
by Martin Waschbüsch 08 Apr '18

08 Apr '18

Hi all, Hey all, I upgraded to dovecot 2.3.1 (from 2.2.34) and noticed that the behavior for dovecot-lda changed. Apparently it no longer accepts -f "" or -f "<>? With 2.2.34, both were accepted now I get: root@mail:~# /usr/local/libexec/dovecot/dovecot-lda -f "<>" lda(root): Fatal: Invalid -f parameter: Null path not allowed or root@mail:~# /usr/local/libexec/dovecot/dovecot-lda -f "" lda(root): Fatal: Invalid -f parameter: Path is empty string I guess this must be a bug? I mean, envelope sender *must* be empty for bounces. Thanks, Martin

2 2

Can’t authenticate any users after upgrade.
by Kevin Cummings 08 Apr '18

08 Apr '18

I’m in the process of upgrading an old server from Fedora 21 to something more modern. Now, Dovecot won’t let any client login to get their email. PAM audit_log_acct_message() failed: Operation not permitted imap-login: Disconnected (AUTH failed, 2 attempts in 10 secs): user=<username>, method=PLAIN, rip=192.168.1.94 lip=192.168.1.94, TLS, session=<sessionid> # 2.3.1 (8e2f634): /etc/dovecot/dovecot.conf # OS: Linux 4.4.14-200.fc22.x86_64 x86_64 Fedora release 22 (Twenty Two) # Hostname: kjchome.homeip.net mbox_write_locks = fcntl namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { driver = pam } ssl = required ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_cipher_list = PROFILE=SYSTEM ssl_dh = # hidden, use -P to show it ssl_key = # hidden, use -P to show it userdb { driver = passwd } -- Kevin J. Cummings cummings(a)kjchome.homeip.net cummings(a)kjc386.framingham.ma.us kjchome(a)icloud.com Registered Linux User #1232 (http://www.linuxcounter.net/)

4 8