- dovecot - dovecot.org

two listeners with different "driver = " configs
by mj 03 Jan '17

03 Jan '17

Hi, I would like to have two seperate imap listeners, with different authentication settings, but the mailstore and userbase etc will be identical. I know I can do this: > service imap-login { > inet_listener imap { > port = 143 > } > inet_listener imap2 { > port = 144 > } > } But I'm unsure how to configure imap/143 with "driver = ldap" and imap2/144 with "driver = pam" Just to explain why i would like this: I am using pam-script-saml (https://github.com/ck-ws/pam-script-saml) to enable saml-based access to dovecot. I would like to have one listener 144 to only serve this saml authentication listener, and the regular 143 listener with driver = ldap. Is that config possible? Best regards, MJ

5 10

differential SETACL silently fails if no vfile exists
by Vincent Breitmoser 02 Jan '17

02 Jan '17

In version 2.2.13, with `acl = vfile`, setting a differential ACL permission doesn't work if there are no permissions set yet. Example IMAP log: b1 GETACL test * ACL test valodim lrwstipekxacd b1 OK Getacl completed. b2 SETACL test valodim -l b2 OK Setacl complete. b3 GETACL test * ACL test valodim lrwstipekxacd b3 OK Getacl completed. My expectation was that the file would be created with default permissions, and the requested change then applied. However, no acl permission is set and no vfile is created for this mailbox in the process. This does work as expected (and a file is created) if I set a non-differential ACL first: b4 SETACL test valodim lrwstipekxacd b4 OK Setacl complete. b5 GETACL test * ACL test valodim akxeilprwtscd b5 OK Getacl completed. b6 SETACL test valodim -l b6 OK Setacl complete. b7 GETACL test * ACL test valodim akxeiprwtscd b7 OK Getacl completed. - V

1 0

dovecot and sssd
by Günther J. Niederwimmer 02 Jan '17

02 Jan '17

Hello, is there a way to configure dovecot over sssd ? like driver = sss Thanks for a answer, -- mit freundlichen Grüssen / best regards Günther J. Niederwimmer

2 1

Re: FreeBSD / dovecot 2.2.27 / libwrap
by Jim Pazarena 30 Dec '16

30 Dec '16

It works ! It was THAT easy ! Can you suggest how to replace the hair I pulled out ? :-) On 2016-12-29 5:27 PM, Larry Rosenman wrote: > login_access_sockets = tcpwrap > > service tcpwrap { > unix_listener login/tcpwrap { > group = $default_login_user > mode = 0600 > user = $default_login_user > } > } > > > > On Thu, Dec 29, 2016 at 7:21 PM, Jim Pazarena <dovecot(a)paz.bz> wrote: > >> I have compiled dovecot2 for FreeBSD with the tcpwrap option. >> >> A tcpwrap binary gets built and resides in the FreeBSD directory >> /usr/local/libexec/dovecot >> >> an examination of the compiled options (using the FreeBSD pkg install >> dovecot2) confirms: LIBWRAP : on >> >> yet, when I adjust dovecot.conf with: login_access_sockets = tcpwrap >> >> I get the following logged error message: >> >> 20161229 17:02:49 imap-login: Error: connect(tcpwrap) failed: No such file >> or directory >> >> Is there any way to turn up some super logging so that I can find just >> what dovecot feels is the failure ? >> >> Or, does anyone have an idea how to figure this out? What little hair I >> have is rapidly getting pulled out in frustration! >> >> Thank you. >> >> >> >> -- >> Jim Pazarena dovecot(a)paz.bz >> > > -- Jim Pazarena dovecot(a)paz.bz

2 1

FreeBSD / dovecot 2.2.27 / libwrap
by Jim Pazarena 30 Dec '16

30 Dec '16

I have compiled dovecot2 for FreeBSD with the tcpwrap option. A tcpwrap binary gets built and resides in the FreeBSD directory /usr/local/libexec/dovecot an examination of the compiled options (using the FreeBSD pkg install dovecot2) confirms: LIBWRAP : on yet, when I adjust dovecot.conf with: login_access_sockets = tcpwrap I get the following logged error message: 20161229 17:02:49 imap-login: Error: connect(tcpwrap) failed: No such file or directory Is there any way to turn up some super logging so that I can find just what dovecot feels is the failure ? Or, does anyone have an idea how to figure this out? What little hair I have is rapidly getting pulled out in frustration! Thank you. -- Jim Pazarena dovecot(a)paz.bz

2 1

doveadm expunge -A Error: Dictionary commit failed
by Alessio Cecchi 29 Dec '16

29 Dec '16

Hi, with the latest dovecot-ee version (dovecot-ee-2.2.26.1-10) if I run “doveadm expunge -A mailbox Spam savedbefore 30d” dovecot an error: doveadm: Error: dict-client: Commit failed: Dict server timeout: No input for 1916.209 secs (1 commands pending, oldest sent 0.000 secs ago: C1) (reply took 0.000 secs) doveadm: Error: expire: Dictionary commit failed Probably also "doveadm quota recalc -A" fail. Everything worked fine up to version 2.2.24 I hope can be fixed. Thanks -- Alessio Cecchi Postmaster AT http://www.qboxmail.it http://www.linkedin.com/in/alessice

3 6

dovecot-ldap.conf.ext for FreeIPA usage
by Matt . 29 Dec '16

29 Dec '16

Hello, I'm figuring out how to auth users against FreeIPA and I wonder if someone did this without GSAPI. My users are stored in a mysql DB where I wonder what I shall use as authname, the username or the mailaddress. As the mailaddress is always unique it could be best but if a user has multiple mailaddresses under seperate domains username might be better. Any clue here and maybe an example for dovecot-ldap.conf.ext when using FreeIPA ? Thanks! Matt

2 1

IPv4/IPv6 mismatches of doveadm: Fatal: connect(fd00:b::1:12345) failed: Connection refused
by Michael Grimm 28 Dec '16

28 Dec '16

Hi — I recently extendend my IPsec tunnel between two mail servers to deal with IPv4 addresses in addition to IPv6 ones. (No specific reason for that.) I ran into an issue worth reporting. This is Dovecot v2.2.27 (c0f36b0) at FreeBSD STABLE-11. Previously: dovecot.conf: plugin { mail_replica = tcp:remote.test } service doveadm { inet_listener { address = [::] } } | local> host remote.test: remote.test has IPv6 address fd00:b::1 working well. Currently: dovecot.conf: plugin { mail_replica = tcp:remote.test } service doveadm { inet_listener { address = * } } | local> host remote.test: remote.test has address 10.2.0.1 remote.test has IPv6 address fd00:b::1 Now, Replication stops and throws an error like: | <mail.crit> local.test dovecot: doveadm(user): Fatal: connect(fd00:b::1:12345) failed: Connection refused If I either #) remove IPv6 from my lokal DNS, #) use "mail_replica = tcp:10.2.0.1", or #) define the appropriate IPv4 address of remote.test in /etc/hosts, then replication works as usual. Hmm, shouldn't doveadm be more persistent in using every IP address of that entry of mail_replica *before* throwing a "Fatal:" error? Or do I miss something, and it's a feature, instead? Regards, Michael

1 0

Versioning Problem
by Günther J. Niederwimmer 28 Dec '16

28 Dec '16

Hello List, I have installed dovecot 2.2.25 on three Systems with two I have a problem with doveadm / dsync ? first: # 2.2.25 (7be1766): /etc/dovecot/dovecot.conf # Pigeonhole version 0.4.14 (099a97c) # OS: Linux 3.10.0-514.2.2.el7.x86_64 x86_64 CentOS Linux release 7.3.1611 (Core) second: # 2.2.25 (7be1766): /etc/dovecot/dovecot.conf # Pigeonhole version 0.4.14 (099a97c) # OS: Linux 3.10.0-514.2.2.el7.x86_64 x86_64 CentOS Linux release 7.3.1611 (Core) But I have this Error in the Logs ? Dec 27 12:00:12 mx dovecot: doveadm(2a02:xxxx:xxxx:xxxx::218): Error: doveadm client not compatible with this server (mixed old and new binaries?) Dec 27 12:01:08 mx dovecot: doveadm(2a02:xxxx:xxxx:xxxx::218): Error: doveadm client not compatible with this server (mixed old and new binaries?) can any tell me why ? -- mit freundlichen Grüssen / best regards Günther J. Niederwimmer

1 0

Identify if a message_part is an attachment ?
by Sai Kiran Gummaraj 27 Dec '16

27 Dec '16

Hello, This is my first post to this group. I have read through the instructions before posting. I hope am doing the right thing. If not my sincere apologies. I am in the process of developing a dovecot IMAP plugin (over v2.2.25). The plugin works with mdbox/sdbox which has ability to keep attachments as external references (via SiS POSIX). The plugin must enable fetching attachment from REDIS instead of local-store. To accomplish this I was following dovecot via my debugger. I wanted to understand if there was a way to determine a message_part to be of an attachment type ? Thanks. -- Regards, Sai Kiran cmd_fetch() |_ imap_fetch_more() |_ imap_fetch_more_int() |_ imap_fetch_state *state = &ctx->state; state->cur_mail is NULL. search mailbox |_ mailbox_search_next(state->search_ctx, &state->cur_mail) |_ mailbox_search_next_nonblock (via vfunc) |_ index_storage_search_next_nonblock |_ search_more_with_prefetching(ctx, mail_r) |_ mail = index_search_get_mail(ctx) |_ allocates mail (vfunc mail_alloc) and calls hook. |_ also allocates index_mails ret = search_more_with_mail(ctx, mail); |_ call handler (*h) => fetch_body_msgpart |_ imap_msgpart_open |_ imap_msgpart_find_part(mail, msgpart, &part); /* only mail comes here */ mail (uid=1739, seq=5) msgpart (section_number = 2, fetch_type = FETCH_MIME_BODY, partial_offset = 0, partial_size = 512, decode_cte_to_binary = 0) |_ mail_get_parts(mail, &parts) /* atmail send msgpart */ |_ call to p->v.get_parts(mail, parts_r) (index_mail_get_parts) /* atmail over-ride this function */ |_ get_cached_parts(mail) /* sets data->part */ |_ get_unserialized_parts(index_mail) |_ get_serialized_parts(mail, &part_buf) |_ index_mail_cache_lookup_field |_ mail_cache_lookup_field |_ imap_msgpart_open_normal() |_ .. see call stack below ..

2 1