- dovecot - dovecot.org

[Dovecot] imapc with Outlook.com transfers max 22-23 messages per mailbox!?
by Nicholas Riley 08 May '14

08 May '14

Hi, I'm trying to migrate a user from Outlook.com IMAP to Dovecot. I'm using a setup similar to that on http://wiki2.dovecot.org/Migration/Dsync: imapc_host = imap-mail.outlook.com imapc_user = [...](a)hotmail.com imapc_password = [...] imapc_features = rfc822.size fetch-headers mail_prefetch_count = 20 imapc_port = 993 imapc_ssl = imaps imapc_ssl_verify = yes ssl_client_ca_dir = /etc/ssl # this needs fixing on the wiki page Here's how I sync a single mailbox, which should have a few hundred messages in it: % doveadm -D -v -c [...] sync -1 -R -u [...] -m Avalon imapc: Output is at http://sabi.net/temp/sync.txt But every mailbox contains at most 22-23 messages. % for i in Maildir/**/cur; do echo $i $(ls -1 $i | wc -l) done Maildir/Alaska/cur 23 Maildir/Avalon/cur 22 Maildir/Christine Scott/cur 22 Maildir/Cornell/cur 22 Maildir/Coupons/cur 10 Maildir/Deleted/cur 22 [...] I was using 2.2.9 but I also tried with the dovecot-2.2 hg tip and did not see any difference. Is there a rawlog equivalent for imapc? I'm hoping that there is a simple protocol usage change that could let me get entire mailboxes. -- Nicholas Riley <njriley(a)illinois.edu>

3 4

[Dovecot] segfault with shared namespace version > 2.1.16
by Tom Lieuallen 08 May '14

08 May '14

We're currently running 2.1.16. I've been wanting to update to a 2.2.X version, but have been running into problems, even with the latest (2.2.12). I'm not sure at what version this issue appeared, but I believe I've tried 2.2.10, 2.2.11, and now 2.2.12. We have a shared maildir setup. With that configuration in place and with a user in the dovecot-acl file, I can do the following to make it segfault every time. Note if I comment out the shared namespace config, it does not segfault. /private/dovecot/libexec/dovecot/imap -u tom2 * PREAUTH [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS THREAD=ORDEREDSUBJECT MULTIAPPEND URL-PARTIAL CATENATE UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS SPECIAL-USE BINARY MOVE] Logged in as tom2 l list "" * Segmentation fault (core dumped) The /a1 and /a2 mentioned here for shared folders and indexes are both local ext4 file systems. =========== Here is the output of dovecot -n: # 2.2.12: /private/dovecot/etc/dovecot/dovecot.conf # OS: Linux 2.6.32-431.el6.x86_64 x86_64 CentOS release 6.5 (Final) first_valid_uid = 100 listen = * mail_location = mbox:~/mail:INBOX=/var/mail/%u:INDEX=/a2/imap-index/%u mail_plugins = quota acl namespace { hidden = yes inbox = no list = children location = maildir:/a1/dove-shared:INDEX=/a2/imap-index/dove-shared/%u prefix = sharedimap/ separator = / type = shared } namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = separator = / type = private } passdb { args = /private/dovecot/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } passdb { args = scheme=CRYPT username_format=%u /private/dovecot/etc/passwd driver = passwd-file } plugin { acl = vfile quota = fs:INBOX:mount=/a1 quota2 = fs:Home quota:mount=%h } protocols = imap lmtp service imap-login { process_limit = 500 process_min_avail = 16 service_count = 1 } service imap { process_limit = 2048 } ssl_cert = </private/ssl/certs/mail.engr.oregonstate.edu.pem ssl_key = </private/ssl/certs/mail.engr.oregonstate.edu.pem userdb { args = /private/dovecot/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } userdb { args = username_format=%u /private/dovecot/etc/passwd driver = passwd-file } ============== I've got core dumps from it. I assume the gdb examples give a reverse trace of the calls. If more is needed, I can supply. Core was generated by `/private/dovecot/libexec/dovecot/imap -u tom2'. Program terminated with signal 11, Segmentation fault. #0 mailbox_settings_find (user=0x6866c0, vname=0x670800 "sharedimap/support-reports") at mail-storage.c:624 624 { Missing separate debuginfos, use: debuginfo-install glibc-2.12-1.132.el6.x86_64 sssd-client-1.9.2-129.el6.x86_64 (gdb) bt full #0 mailbox_settings_find (user=0x6866c0, vname=0x670800 "sharedimap/support-reports") at mail-storage.c:624 box_set = <value optimized out> ns = <value optimized out> #1 0x00007f1cb0323fd0 in mailbox_list_get_storage (list=0x7fff73b39088, vname=<value optimized out>, storage_r=0x7fff73b39080) at mailbox-list.c:821 set = <value optimized out> #2 0x00007f1cb03164a7 in mail_namespace_find_shared ( namespaces=<value optimized out>, mailbox=0x670800 "sharedimap/support-reports") at mail-namespace.c:651 list = 0x68ea30 storage = 0x0 #3 mail_namespace_find (namespaces=<value optimized out>, mailbox=0x670800 "sharedimap/support-reports") at mail-namespace.c:669 ns = 0x68ad70 __FUNCTION__ = "mail_namespace_find" .... .... thank you Tom Lieuallen Oregon State University

2 3

[Dovecot] Error Panic: file mail-storage.c
by Davide 08 May '14

08 May '14

Hi to all, i have dovecot 2.2.12 compiled from source on debian 6 i find this errors on errorlog ...... 2014-05-08 12:44:21 imap(XXXXXXXXX): Panic: file mail-storage.c: line 2141 (mailbox_copy): assertion failed: (!ctx->unfinished) 2014-05-08 12:44:21 imap(XXXXXXXXX): Error: Raw backtrace: /usr/local/lib/dovecot/libdovecot.so.0(+0x6f47a) [0x7f54671e847a] -> /usr/local/lib/dovecot/libdovecot.so.0(+0x6f4f6) [0x7f54671e84f6] -> /usr/local/lib/dovecot/libdovecot.so.0(i_error+0) [0x7f546719d9ef] -> /usr/local/lib/dovecot/libdovecot-storage.so.0(+0x899f8) [0x7f54674d79f8] -> /usr/local/lib/dovecot/libdovecot-storage.so.0(mailbox_move+0x1d) [0x7f54674d7a2d] -> dovecot/imap() [0x40d797] -> dovecot/imap(command_exec+0x3d) [0x419c0d] -> dovecot/imap() [0x418c00] -> dovecot/imap() [0x418d15] -> dovecot/imap(client_handle_input+0x125) [0x4191a5] -> dovecot/imap(client_input+0x6f) [0x419a5f] -> /usr/local/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x36) [0x7f54671f8fc6] -> /usr/local/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x95) [0x7f54671fa345] -> /usr/local/lib/dovecot/libdovecot.so.0(io_loop_run+0x38) [0x7f54671f8f38] -> /usr/local/lib/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f54671a2ed3] -> dovecot/imap(main+0x2a7) [0x423907] -> /lib/libc.so.6(__libc_start_main+0xfd) [0x7f5466e35c8d] -> dovecot/imap() [0x40bcc9] 2014-05-08 12:44:21 imap(XXXXXXXXX): Fatal: master: service(imap): child 23777 killed with signal 6 (core dumps disabled) 2014-05-08 12:44:21 imap(XXXXXXXXX): Panic: file mail-storage.c: line 2141 (mailbox_copy): assertion failed: (!ctx->unfinished) 2014-05-08 12:44:21 imap(XXXXXXXXX): Error: Raw backtrace: /usr/local/lib/dovecot/libdovecot.so.0(+0x6f47a) [0x7f31fc2ae47a] -> /usr/local/lib/dovecot/libdovecot.so.0(+0x6f4f6) [0x7f31fc2ae4f6] -> /usr/local/lib/dovecot/libdovecot.so.0(i_error+0) [0x7f31fc2639ef] -> /usr/local/lib/dovecot/libdovecot-storage.so.0(+0x899f8) [0x7f31fc59d9f8] -> /usr/local/lib/dovecot/libdovecot-storage.so.0(mailbox_move+0x1d) [0x7f31fc59da2d] -> dovecot/imap() [0x40d797] -> dovecot/imap(command_exec+0x3d) [0x419c0d] -> dovecot/imap() [0x418c00] -> dovecot/imap() [0x418d15] -> dovecot/imap(client_handle_input+0x125) [0x4191a5] -> dovecot/imap(client_input+0x6f) [0x419a5f] -> /usr/local/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x36) [0x7f31fc2befc6] -> /usr/local/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x95) [0x7f31fc2c0345] -> /usr/local/lib/dovecot/libdovecot.so.0(io_loop_run+0x38) [0x7f31fc2bef38] -> /usr/local/lib/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f31fc268ed3] -> dovecot/imap(main+0x2a7) [0x423907] -> /lib/libc.so.6(__libc_start_main+0xfd) [0x7f31fbefbc8d] -> dovecot/imap() [0x40bcc9] 2014-05-08 12:44:21 imap(XXXXXXXXX): Fatal: master: service(imap): child 23779 killed with signal 6 (core dumps disabled) ..... Some advice to resolve the problem? -- *Davide Marchi* *T*eorema *F*errara *Srl* Via Spronello, 7 - Ferrara - 44121 Tel. *0532783161* Fax. *0532783368* E-m@il: *davide.marchi(a)mail.cgilfe.it* Skype: *davide.marchi73* Web: *http://www.cgilfe.it* *CONFIDENZIALITA'* *Ai sensi del D.Lgs. 196/2003 si precisa che le informazioni contenute in questo messaggio sono riservate ed a uso esclusivo del destinatario/dei destinatari. Qualora il messaggio in parola Le fosse pervenuto per errore, La invitiamo ad eliminarlo senza copiarlo e a non inoltrarlo a terzi, dandocene gentilmente comunicazione.* *Per favore, pensa all'ambiente. Stampa questa email solo se necessario.*

1 0

[Dovecot] Dsync via dovecot proxy
by mtrainer＠cloud-free.com 08 May '14

08 May '14

Hi All, I need to import mailboxes into my Director NFS setup via one of my director proxy's as doing a direct dsync to the backend mailstores appears to giving me NFS locking issues. It looks like it may be possible to do this using doveadm listeners. I have setup doveadm listeners on a test proxy and backend mailstore. I am not sure how to make the dsync proxy through to the backend mailstore - it doesn't appear to be doing so below. My dovecot configs follow further below. Any help would be greatly appreciated. Murray dsync -v -D -u test1(a)example777.com mirror ssh root@mailproxy-test01 dsync -c /etc/dovecot/dovecot.conf -u test1(a)example777.com doveadm(test1(a)example777.com): Debug: Added userdb setting: mail=maildir:/home/user1/mail/example777.com/test1 doveadm(test1(a)example777.com): Debug: Added userdb setting: plugin/quota=maildir:storage=0 doveadm(test1(a)example777.com): Debug: Effective uid=501, gid=502, home=/home/user1/mail/example777.com/test1 doveadm(test1(a)example777.com): Debug: Namespace : type=private, prefix=INBOX., sep=, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:/home/user1/mail/example777.com/test1 doveadm(test1(a)example777.com): Debug: maildir++: root=/home/user1/mail/example777.com/test1, index=, indexpvt=, control=, inbox=/home/user1/mail/example777.com/test1, alt= doveadm(test1(a)example777.com): Debug: Namespace : type=private, prefix=, sep=, inbox=no, hidden=yes, list=no, subscriptions=no location=fail::LAYOUT=none doveadm(test1(a)example777.com): Debug: none: root=, index=, indexpvt=, control=, inbox=, alt= doveadm(test1(a)example777.com): Debug: Namespace INBOX.: Using permissions from /home/user1/mail/example777.com/test1: mode=0751 gid=default root@mailproxy-test01's password: doveadm(test1(a)example777.com): Error: user test1(a)example777.com: Initialization failed: Initializing mail storage from environment MAIL failed: Ambiguous mail location setting, don't know what to do with it: /var/mail/root (try prefixing it with mbox: or maildir:) doveadm(test1(a)example777.com): Fatal: User init failed dsync-local(test1(a)example777.com): Debug: brain M: in state=master_recv_handshake dsync-local(test1(a)example777.com): Error: read(remote) failed: EOF (version not received) dsync-local(test1(a)example777.com): Debug: brain M: out state=master_recv_handshake changed=0 # 2.2.9: /etc/dovecot/dovecot-director.conf # OS: Linux 3.2.0-4-amd64 x86_64 Debian 7.1 auth_cache_size = 32 M auth_cache_ttl = 2 hours auth_debug = yes auth_mechanisms = plain login auth_verbose = yes base_dir = /var/run/dovecot/ director_mail_servers = 27.54.95.50 director_servers = 27.54.95.36 disable_plaintext_auth = no doveadm_allowed_commands = all doveadm_password = xxxxxxxxxxx lmtp_proxy = yes log_path = /var/log/dovecot.log mail_debug = yes passdb { args = nopassword=y proxy=y driver = static } protocols = " imap lmtp pop3" service auth-worker { user = dovecot } service auth { client_limit = 4096 unix_listener auth-userdb { group = mail mode = 0666 user = dovecot } } service director { fifo_listener login/proxy-notify { mode = 0666 } inet_listener { address = 27.54.95.36 port = 9090 } unix_listener director-userdb { mode = 0600 } unix_listener login/director { mode = 0666 } } service doveadm { executable = doveadm-server director inet_listener doveadm-server { port = 24245 } } service imap-login { chroot = login executable = imap-login director inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } process_limit = 2048 process_min_avail = 32 service_count = 1 user = dovecot vsz_limit = 256 M } service imap { process_limit = 4096 vsz_limit = 256 M } service ipc { unix_listener ipc { mode = 0666 user = dovecot } } service lmtp { inet_listener lmtp { address = 27.54.95.36 port = 24 } process_limit = 2048 process_min_avail = 32 } service pop3-login { chroot = login executable = pop3-login director inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 ssl = yes } process_limit = 2048 process_min_avail = 32 service_count = 1 user = dovecot vsz_limit = 256 M } service pop3 { process_limit = 4096 vsz_limit = 256 M } ssl_cert = ssl_key = userdb { driver = prefetch } userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocol lmtp { auth_socket_path = director-userdb lmtp_save_to_detail_mailbox = yes recipient_delimiter = + } protocol doveadm { auth_socket_path = director-userdb } protocol imap { imap_client_workarounds = tb-extra-mailbox-sep imap_logout_format = bytes=%i/%o imap_max_line_length = 128 k mail_max_userip_connections = 50 mail_plugins = quota imap_quota } protocol pop3 { mail_max_userip_connections = 50 mail_plugins = quota pop3_client_workarounds = outlook-no-nuls pop3_fast_size_lookups = yes pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s pop3_uidl_format = %08Xu%08Xv } # 2.2.9: /etc/dovecot/dovecot-mailstore.conf # OS: Linux 3.2.0-4-amd64 x86_64 Debian 7.1 auth_cache_size = 64 M auth_cache_ttl = 2 hours auth_debug = yes auth_debug_passwords = yes auth_failure_delay = 0 auth_mechanisms = plain login auth_verbose = yes auth_worker_max_count = 256 base_dir = /var/run/dovecot/ disable_plaintext_auth = no first_valid_gid = 1001 first_valid_uid = 1001 mail_debug = yes mail_fsync = always mail_location = maildir:~/ mmap_disable = yes namespace { inbox = yes location = mailbox Drafts { special_use = Drafts } mailbox Junk { special_use = Junk } mailbox Sent { special_use = Sent } mailbox "Sent Messages" { special_use = Sent } mailbox Trash { special_use = Trash } prefix = subscriptions = yes } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { mail_log_fields = uid box msgid size quota = maildir:User quota sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = " imap lmtp pop3" service anvil { client_limit = 4106 } service auth-worker { user = dovecot } service auth { client_limit = 4096 unix_listener auth-userdb { group = mail mode = 0666 user = dovecot } } service doveadm { inet_listener doveadm-server { port = 24245 } user = root } service imap-login { chroot = login inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } process_limit = 2048 process_min_avail = 32 service_count = 1 user = dovecot vsz_limit = 256 M } service imap { process_limit = 4096 vsz_limit = 256 M } service lmtp { inet_listener lmtp { address = 27.54.95.50 port = 24 } process_min_avail = 32 } service pop3-login { chroot = login inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 ssl = yes } process_limit = 2048 process_min_avail = 32 service_count = 1 user = dovecot vsz_limit = 256 M } service pop3 { process_limit = 4096 vsz_limit = 256 M } ssl_cert = ssl_key = userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } verbose_proctitle = yes verbose_ssl = yes protocol imap { imap_client_workarounds = tb-extra-mailbox-sep imap_logout_format = bytes=%i/%o imap_max_line_length = 128 k mail_max_userip_connections = 50 mail_plugins = quota imap_quota } protocol pop3 { mail_max_userip_connections = 50 mail_plugins = quota pop3_client_workarounds = outlook-no-nuls pop3_fast_size_lookups = yes pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s pop3_uidl_format = %08Xu%08Xv } local 27.54.95.32/27/27 { doveadm_password = xxxxxxxxxx }

2 1

[Dovecot] dsync replication does not replicate new subfolders
by Nikolaos Milas 08 May '14

08 May '14

Hello, Although this issue has been raised in another thread: https://www.mail-archive.com/dovecot@dovecot.org/msg57281.html I decided I should create a new one dedicated on it because that thread includes other issues as well, and the issue in question still remains unresolved although it is an important one (and I am hoping to attract Timo's attention on it, too ;-) ). The problem is that when dsync is configured between two servers (master/master), messages do get replicated, but newly created subfolders do not get replicated; as a result, when messages are moved by users from existing folders to newly created ones, replication results in chaos. Manually running a dsync command does not resolve the issue. See details of debug log on the above thread. I remind you that the configs of the two master/master installations (2.2.12) are available at: Primary Master: https://www.mail-archive.com/dovecot@dovecot.org/msg57298.html Secondary Master: https://www.mail-archive.com/dovecot@dovecot.org/msg57304.html The questions: 1. Is it an expected dsync behavior that newly created subfolders do not get replicated? 2. If yes, how can we replicate those? 3. If not, what is going wrong in the replication process? Does our configuration need a fix (which?) or does Dovecot needs one? Please advise! Sincerely, Nick

2 1

[Dovecot] Dovecot quoting problem?
by Gerhard Wiesinger 07 May '14

07 May '14

Hello Timo, I think the following commit makes problems: http://hg.dovecot.org/dovecot-2.2/rev/68a8b650578e # Doesn't work A01 LIST "" ~/Mail/Gesendet # OK with quoted mailbox A02 LIST "" "~/Mail/Gesendet" Details: imap * PREAUTH [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS THREAD=ORDEREDSUBJECT MULTIAPPEND URL-PARTIAL CATENATE UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS SPECIAL-USE BINARY MOVE] Logged in as user A01 LIST "" ~/Mail/Gesendet A01 BAD Error in IMAP command LIST: literal8 not allowed here A02 LIST "" "~/Mail/Gesendet" * LIST (\NoInferiors \UnMarked) "/" ~/Mail/Gesendet A02 OK List completed. A03 STATUS ~/Mail/Gesendet (MESSAGES UNSEEN RECENT) A03 BAD Error in IMAP command STATUS: literal8 not allowed here A04 STATUS "~/Mail/Gesendet" (MESSAGES UNSEEN RECENT) * STATUS ~/Mail/Gesendet (MESSAGES 0 RECENT 0 UNSEEN 0) A04 OK Status completed. Is this a bug of dovecot or a bug of the IMAP client (roundcube mail)? Thank you Ciao, Gerhard

2 2

[Dovecot] TCP Cluster replication headache
by FUSTE Emmanuel 07 May '14

07 May '14

Hello, After going crazy building a dovecot cluster, I finally see the light ;-)) But some things are "strange" and could probably be fixed/enhanced. First : I follow the wiki doc, setting global doveadm_port. Things did not work, I've got: dovecot: doveadm(X1234567): Error: sync: /var/run/dovecot/auth-userdb: Configured passdbs don't support crentials lookups (to see if user is proxied, because doveadm_port is set) Same kind of error too when trying to use doveadm on the command line to get the replica status. My user/auth db is LDAP with "auth_bind = yes", but I don't understand the message in these context and did'nt know how to fix this. I tried to hardcode proxy/proxy_maybe property in the passdb declaration etc... Finally, I remove the global "doveadm_port 12345" and add ":12345" at the end of my "mail_replica =" line and all began to work ! Is it a wanted and expected error/fix ? Secondly: Now all is working and "doveadm replicator status '*' " correctly list all my users and the status, but after a few seconds (after replication kick in), I see all user listed twice. One time, as declared in the userdb with letters in uppercase : "X1234567" One time, in lowercase : "x1234567" On disk, all is OK, with only one replica in an uppercase directory. I initially think that it was a mismatch between userdb and passdb users return, but it was in fact the default value of auth_username_format that was the culprit. After going from the default %Lu to %u doveadm replicator status show only one entry per user as expected. Is it wanted and expected too? why auth_username_format is used/interact with/in the replication process and/or the replicator status command ? Not all is functionally tested, I go back to work. My is conf at the end of this message. Thanks Simo for this great piece of software. Emmanuel # 2.2.12.7 (f7731356530e+): /etc/dovecot/dovecot.conf # OS: Linux 3.11.0-19-generic x86_64 Ubuntu 12.04.4 LTS auth_master_user_separator = * auth_username_format = %u doveadm_password = xxxxxxxxxxx lda_mailbox_autocreate = yes listen = * mail_gid = vmail mail_location = maildir:~/Maildir mail_plugins = quota notify replication mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace { hidden = no inbox = yes list = yes location = prefix = separator = / subscriptions = yes type = private } namespace { hidden = no inbox = no list = children location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u prefix = shared/%%u/ separator = / subscriptions = no type = shared } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { acl = vfile acl_anyone = allow acl_shared_dict =file:/appli/vmail/shared-mailboxes mail_replica = tcp:thsmytmbx02p.online.corp.thales:12345 quota = dict:userquota::file:/appli/vmail/local_userquota/%%h/dovecot-quota quota_rule = *:storage=100M quota_rule2 = INBOX:storage=+20%% quota_rule3 = Trash:storage=+10%% sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap sieve service aggregator { fifo_listener replication-notify-fifo { user = vmail } unix_listener replication-notify { user = vmail } } service auth { unix_listener auth-userdb { group = vmail mode = 0660 } } service doveadm { inet_listener { port = 12345 } user = vmail } service replicator { process_min_avail = 1 unix_listener replicator-doveadm { mode = 0666 } } ssl = no userdb { args = /etc/dovecot/dovecot-users-ldap.conf.ext driver = ldap } protocol lda { mail_plugins = quota sieve } protocol imap { mail_plugins = quota imap_quota } dovecot-users-ldap.conf.ext: dovecot-ldap.conf.ext: uris = ldapi:/// dn = uid=dovecot,dc=mydomain,dc=com dnpass = xxxxxxxxxxxx auth_bind = yes ldap_version = 3 base = ou=users,dc=mydomain,dc=com user_attrs = =home=/appli/vmail/%{ldap:uid} user_filter = (&(objectClass=inetOrgPerson)(|(uid=%u)(mail=%u))) pass_attrs = =user=%{ldap:uid} pass_filter = (&(objectClass=inetOrgPerson)(uid=%u)(!(pwdReset=TRUE))) iterate_attrs = uid=user iterate_filter = (objectClass=inetOrgPerson)

1 1

[Dovecot] BUG report: doveadm HEADER <field> <pattern> when concatenating with another Search key
by megodin＠inboxalias.com 07 May '14

07 May '14

Hey there, I'm pretty sure I've found a bug with doveadm when concatenating with another search key. While doveadm HEADER <field pattern> works fine when not using additional search keys, it doesn't work properly when concatenating with other serarch keys - it then simply seems to ignore the additional HEADER <field pattern> search key. It's reproduceable, also with different user accounts on 2 different productive systems. Testing it on latest dovecot-ee 2.2.9.2 and 2.2.5.5. I think it's best explained with showing some examples: doveadm search -u exampleuser SUBJECT Silvester (outputs correctly 10 matches) 5a09f50926daef51b50e000025ab05f8 1106 5a09f50926daef51b50e000025ab05f8 1107 5a09f50926daef51b50e000025ab05f8 1579 5a09f50926daef51b50e000025ab05f8 4092 5a09f50926daef51b50e000025ab05f8 5330 5a09f50926daef51b50e000025ab05f8 9773 5a09f50926daef51b50e000025ab05f8 11460 5a09f50926daef51b50e000025ab05f8 12718 5a09f50926daef51b50e000025ab05f8 15653 5a09f50926daef51b50e000025ab05f8 15697 doveadm search -u exampleuser SUBJECT Silvester HEADER Return-Path someuser(a)example.com (gives exactly the same output - but this is WRONG, as the given Subject AND Return-Path is really only found in 1 Message - uid 15697) 5a09f50926daef51b50e000025ab05f8 1106 5a09f50926daef51b50e000025ab05f8 1107 5a09f50926daef51b50e000025ab05f8 1579 5a09f50926daef51b50e000025ab05f8 4092 5a09f50926daef51b50e000025ab05f8 5330 5a09f50926daef51b50e000025ab05f8 9773 5a09f50926daef51b50e000025ab05f8 11460 5a09f50926daef51b50e000025ab05f8 12718 5a09f50926daef51b50e000025ab05f8 15653 5a09f50926daef51b50e000025ab05f8 15697 doveadm search -u exampleuser HEADER Return-Path someuser(a)example.com (showing that Return-Path as standalone search key is working fine - note that message uid 15697 with subject "Silvester" is also found of course. I manually checked all Mails showing up here, they all contained the Return-Path "someuser(a)example.com" as they should): 5a09f50926daef51b50e000025ab05f8 14080 5a09f50926daef51b50e000025ab05f8 14814 5a09f50926daef51b50e000025ab05f8 14815 5a09f50926daef51b50e000025ab05f8 14820 5a09f50926daef51b50e000025ab05f8 14825 5a09f50926daef51b50e000025ab05f8 14830 5a09f50926daef51b50e000025ab05f8 14832 5a09f50926daef51b50e000025ab05f8 14833 5a09f50926daef51b50e000025ab05f8 15427 5a09f50926daef51b50e000025ab05f8 15428 5a09f50926daef51b50e000025ab05f8 15430 5a09f50926daef51b50e000025ab05f8 15431 5a09f50926daef51b50e000025ab05f8 15697 Further testing with: doveadm search -u exampleuser HEADER Return-Path completegarbageforsurenotinheaders (Correctly no output was given.) doveadm search -u exampleuser SUBJECT Silvester HEADER Return-Path completegarbageforsurenotinheaders (again ignoring the additional HEADER and showing all uids which just match the SUBJECT) 5a09f50926daef51b50e000025ab05f8 1106 5a09f50926daef51b50e000025ab05f8 1107 5a09f50926daef51b50e000025ab05f8 1579 5a09f50926daef51b50e000025ab05f8 4092 5a09f50926daef51b50e000025ab05f8 5330 5a09f50926daef51b50e000025ab05f8 9773 5a09f50926daef51b50e000025ab05f8 11460 5a09f50926daef51b50e000025ab05f8 12718 5a09f50926daef51b50e000025ab05f8 15653 5a09f50926daef51b50e000025ab05f8 15697 Moreove, when playing with HEADER Reply-To it shows some strange behaviour, note the differences with the ":" : doveadm search -u exampleuser SUBJECT blubbs HEADER Reply-to kacke(a)example.com f64cf50926daef51b50e000025ab05f8 2231 f64cf50926daef51b50e000025ab05f8 2781 5a09f50926daef51b50e000025ab05f8 13620 5a09f50926daef51b50e000025ab05f8 15763 doveadm search -u exampleuser SUBJECT blubbs HEADER Reply-to: kacke(a)example.com f64cf50926daef51b50e000025ab05f8 2231 5a09f50926daef51b50e000025ab05f8 13620 Can you please have a look at this and fix it? Thanks in advance, Megodin -- mailstorage @ NFS with nfsvers=3 (NetApp) # 2.2.5.5 (e5350245ad9b): /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-358.23.2.el6.x86_64 x86_64 Red Hat Enterprise Linux Server release 6.4 (Santiago) nfs import_environment = TZ DEBUG_OUTOFMEM DOVECOT_HOSTDOMAIN # 2.2.9.2 (8d71ef248a6e): /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-358.23.2.el6.x86_64 x86_64 CentOS release 6.5 (Final) nfs _________________________________________________________________ Send and receive anonymous emails to your inbox with InboxAlias. http://www.inboxalias.com

2 1

[Dovecot] New global ACL mailbox pattern feature in HG
by Thomas Leuxner 07 May '14

07 May '14

Hi, I played around with changeset 9376bf098692 a bit. Right now I'm unsure how to describe a namespace using this feature. Using something like 'Public/*" doesn't seem to work while 'Public*" does, but would also potentially alter non-related mailboxes elsewhere: $ cat global-acl INBOX owner lrwstiekxap Public* group=PublicMailboxAdmins lrwsik Regards Thomas

2 8

[Dovecot] Corrupted mailbox, how to fix?
by Ralf Hildebrandt 07 May '14

07 May '14

>From my log: May 06 16:26:49 imap(loginname): Error: zlib.read(/var/mail/loginname/mdbox/storage/m.94): gz trailer has wrong CRC value at 2412347 May 06 16:26:49 imap(loginname): Error: read() failed: Invalid argument (FETCH for mailbox INBOX UID 3434) How do I fix that? -- Ralf Hildebrandt Geschäftsbereich IT | Abteilung Netzwerk Charité - Universitätsmedizin Berlin Campus Benjamin Franklin Hindenburgdamm 30 | D-12203 Berlin Tel. +49 30 450 570 155 | Fax: +49 30 450 570 962 ralf.hildebrandt(a)charite.de | http://www.charite.de

2 1