- dovecot - dovecot.org

[Dovecot] Make install error
by kengheng 05 Jun '13

05 Jun '13

Hi, I'm recompiling dovecot 2.2.0/2.2.1 with error below during make install: test -z "/usr/local/dovecot/lib/dovecot/auth" || /usr/bin/mkdir -p "/usr/local/dovecot/lib/dovecot/auth" /usr/bin/mkdir: cannot create directory ‘/usr/local/dovecot/lib/dovecot/auth’: File exists make[3]: *** [install-auth_moduleLTLIBRARIES] Error 1 make[3]: Leaving directory `/usr/local/src/dovecot-2.2.1/src/auth' make[2]: *** [install-am] Error 2 make[2]: Leaving directory `/usr/local/src/dovecot-2.2.1/src/auth' make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory `/usr/local/src/dovecot-2.2.1/src' make: *** [install-recursive] Error 1 The target Svr OS: OpenSuse 12.2 x86 and installed success for qmail/vpopmail. The configuration for dovecot as below: ./configure \ --prefix=/usr/local/dovecot \ --with-vpopmail \ --with-docs \ --with-ssl \ --without-shadow \ --without-pam \ --without-ldap \ --without-pgsql \ --without-sql \ --without-mysql \ --without-sqlite Thanks, KH. Chan

4 11

[Dovecot] Director in v2.2.2
by Joe Wong 05 Jun '13

05 Jun '13

Hi, I am going to try and study Dovecot with Director in v2.2.2, would like to confirm the Director bundled there is the latest version, as I saw #define DIRECTOR_VERSION_NAME "director" #define DIRECTOR_VERSION_MAJOR 1 #define DIRECTOR_VERSION_MINOR 3 in director.h thanks, - Joe

1 0

[Dovecot] Support not compiled in for passdb driver 'pam' + telnet localhost imap.
by Maria Jose Yañez Dacosta 05 Jun '13

05 Jun '13

Hi!, I Install dovecot version 2.1.16 on CentOS 6.4 x86_64. When I try to test the installation (by telnet localhost imap) the following error occurs: "auth: Fatal: Support not compiled in for passdb driver 'pam'". I do not discover what caused this. Here I leave the configuration data and the log. Thanks ------------------------------------ / var / log / maillog --------------------------------------- May 31 15:45:55 prueba-mail dovecot: master: Dovecot v2.1.16 starting up (core dumps disabled) May 31 15:46:04 prueba-mail dovecot: auth: Fatal: Support not compiled in for passdb driver 'pam' May 31 15:46:04 prueba-mail dovecot: master: Error: service(auth): command startup failed, throttling for 2 secs May 31 15:46:04 prueba-mail dovecot: imap-login: Disconnected: Auth process broken (disconnected before greeting, waited 0 secs): user=<>, rip=::1, lip=::1, secured, session=<jabyBgjevAAAAAAAAAAAAAAAAAAAAAAB> ------------------------------------ doveconf-n -------------------------------------------------- # 2.1.16: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 2.6.32-358.6.2.el6.x86_64 x86_64 CentOS release 6.4 (Final) auth_use_winbind = yes namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } passdb { driver = pam } protocols = imap pop3 ssl = no userdb { args = uid=10000 gid=10000 home=/mail/%d/%n allow_all_users=yes driver = static } -- Maria José

1 0

[Dovecot] Fw: Cannot Authenticate via LDAP
by Christian Wiese 04 Jun '13

04 Jun '13

Hello Christian, I tried what you suggested by adding "REFERALS off" to /etc/ldap/ldap.conf and restarting slapd and dovecot, but the error persists. On Tue, Jun 4, 2013 at 7:56 AM, Christian Wiese < christian.wiese(a)securepoint.de> wrote: > Hi Ron, > > I didn't had the time to check all logs but the error log. > First thing you should check if there are LDAP REFFERALS enabled in > the systems ldap.conf. > I had a similar looking issue and it took me a good amount of time to > figure out that I had to disable LDAP REFFERALS globally. > This happened when using an AD as LDAP backend, but also applies to > Samba4 as you can see in the following mailing list thread: > > > http://dovecot.markmail.org/message/mjurv4fp4w65u2ib?q=Dovecot+LDA+LDAP+loo… > > The settings within the systems ldap.conf might influence dovecot, > because libldap (openldap) functions might read the global ldap.conf > settings. > > Hope that helps. > > Cheers, > Chris > > Am Tue, 4 Jun 2013 05:50:16 -0400 > schrieb Ron Scott-Adams <ron(a)tohuw.net>: > > > a login tohuw [myPassword] returns "NO [AUTHENTICATIONFAILED] > > Authentication failed." I believe I'm missing a configuration > > detail, but what? > > > > > > info.log: http://pastebin.ca/2388873 > > > > debug.log: http://pastebin.ca/2388872 > > > > error.log: http://pastebin.ca/2388871 > > > > dovecot -n: http://pastebin.ca/2388870 > > > > dovecot-ldap.conf.ext summary: http://pastebin.ca/2388867 > >

3 5

[Dovecot] Administrative mailbox deletions
by Alan Brown 04 Jun '13

04 Jun '13

I'm in the process of nuking a bunch of dead mailboxes after they've been migrated to other servers - but the accounts have been kept. A simple shell script takes care of most of it, BUT.... (there's always a "but" isn't there?) One user has named all his mailboxes with leading hyphens. ie: -foo -bar -bazz and "doveadm mailbox delete" doesn't like it. Does anyone have the magic sauce needed to escape the - character? Thanks in advance Alan

3 2

[Dovecot] Cannot Authenticate via LDAP
by Ron Scott-Adams 04 Jun '13

04 Jun '13

a login tohuw [myPassword] returns "NO [AUTHENTICATIONFAILED] Authentication failed." I believe I'm missing a configuration detail, but what? info.log: http://pastebin.ca/2388873 debug.log: http://pastebin.ca/2388872 error.log: http://pastebin.ca/2388871 dovecot -n: http://pastebin.ca/2388870 dovecot-ldap.conf.ext summary: http://pastebin.ca/2388867

2 1

Re: [Dovecot] Administrative mailbox deletions
by Alan Brown 04 Jun '13

04 Jun '13

>> and "doveadm mailbox delete" doesn't like it. >> >> Does anyone have the magic sauce needed to escape the - character? > > An "escaping" that works at the *nix level (not necessarily with > doveadm, but I would assume it works there too) is, e.g., > > rm -- -foo > > i.e., double dashes to nullify the "-" option flag, followed by the > filename. That does work. Thanks. Alan

1 0

[Dovecot] Imap Server as storage backend for dovecot
by Micha Krause 04 Jun '13

04 Jun '13

Hi, I remember reading about the possibility to configure a namespace to point to another imap server (not dovecot) and use it as a backend for storing mails. However, I could not find any documentation about this, so Im not sure if I remember correctly. Micha Krause

1 0

[Dovecot] recursive mail_location?
by Eric Abrahamsen 04 Jun '13

04 Jun '13

Forgive what may be a newby question, but I'm trying to get a new setup working, and there are many different things confusing me. I'm trying for a gnus + dovecot + mbsync arrangement, with mbsync writing to maildirs, and gnus reading from those dirs with a dovecot invocation. Fairly standard, I think. I have multiple email accounts I'm trying to sync, all of them gmail. My problem is that mbsync creates one maildir structure for each mailbox in each account. So I end up with: ~/mail ├── acc1 │ ├── INBOX │ │ ├── cur │ │ ├── new │ │ └── tmp │ └── OTHERBOX │ ├── cur │ ├── new │ └── tmp └── acc2 ├── INBOX │ ├── cur │ ├── new │ └── tmp └── OTHERBOX ├── cur ├── new └── tmp And so on, for many accounts, and many mailboxes. I believe there's something I can configure in mbsync to collapse this a little, but there's still going to be quite a bit of nesting. Gnus, meanwhile, is meant to invoke dovecot with the "-o mail_location" switch, and as far as I can tell that needs to be pointed at a maildir structure, which means I would need a separate gnus server for each mailbox in each account. Does anyone have a recommended way of handling this? Is it possible to either "flatten" the structure further, or somehow tell dovecot to recurse into directories? I don't mind having a separate gnus server for each mail account, but I'd hate to have to do one per mailbox. I'm only just getting started and haven't invested myself in any particular setup, so if the answer is "you're doing it all wrong", I would love to hear that. Thanks! Eric

3 5

[Dovecot] Configuration advice needed.
by Olivier Girard 03 Jun '13

03 Jun '13

Hello, First, thanks for this great piece of software. I'm new to dovecot and i've just converted my old courier configuration on pop/imap server side, everithing is working just fine on this side and speed gain expected was found (not enough for our busy servers :). Setup is done with 3 dovecot virtual servers load balanced with a Hardware load balancer (this part is a big point of the question). Postfix and dovecot servers use an NFS share on a NetApp for mail, Postfix servers are writting directly to inbox maildirs. Load balanced is maintaining afinity betwen client and server so i've got no problem with this for the moment. Now, i want to setup postfix (3 HW load balanced) for local delivery with LMTP on deovecot servers, and here come my questions. Afinity can't be maintained between IMAP and LMTP for a user with my load balancer so mail can be delivered on dovecot01 and read on dovecot02, from what i've read this can be an issue with indexes. I think i need to setup a director to maintain LMTP and IMAP afinity between users and servers but on imap servers i'm identifying user with their UID, and LMTP need to see emails. Does dovecot see the same user or 2 users with the same homedir? So my question is: could you point me to the right direction with this setup, do you have any advice on this config. Actual configurations: (postlogin not in real use, just a touch on (imap/pop3)_last_login) POP/IMAP server: dovecot01# doveconf -n # 2.1.15: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 8.3-RELEASE-p3 amd64 auth_cache_negative_ttl = 0 auth_cache_size = 10 M auth_mechanisms = plain login auth_verbose = yes default_client_limit = 1500 default_process_limit = 500 default_vsz_limit = 1 G disable_plaintext_auth = no dotlock_use_excl = no lock_method = dotlock mail_fsync = always mail_gid = vmail mail_location = maildir:%h/Maildir:INDEX=/mail_index%h mail_nfs_index = yes mail_nfs_storage = yes mail_plugins = " stats" mail_uid = vmail mmap_disable = yes namespace { inbox = yes location = prefix = INBOX. separator = . } passdb { args = /usr/local/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { stats_refresh = 30 secs stats_track_cmds = yes } protocols = imap pop3 service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } user = $default_internal_user } service imap-postlogin { executable = script-login /usr/local/bin/imap-postlogin.sh user = vmail } service imap { executable = imap imap-postlogin process_limit = 1024 } service pop3-postlogin { executable = script-login /usr/local/bin/pop3-postlogin.sh user = vmail } service pop3 { executable = pop3 pop3-postlogin process_limit = 1024 } service stats { fifo_listener stats-mail { mode = 0600 user = vmail } } ssl_cert = </etc/ssl/cert/mail.univ-angers.fr.pem ssl_key = </etc/ssl/cert/mail.univ-angers.fr.key userdb { args = /usr/local/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocol imap { mail_plugins = " stats imap_stats" } Postfix Test Server: %doveconf -n # 2.1.15: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 8.3-RELEASE-p3 amd64 auth_debug = yes auth_mechanisms = plain login auth_verbose = yes default_client_limit = 1500 default_process_limit = 500 default_vsz_limit = 512 M disable_plaintext_auth = no dotlock_use_excl = no lock_method = dotlock mail_fsync = always mail_gid = vmail mail_location = maildir:%h/Maildir:INDEX=/mail_index%h mail_nfs_index = yes mail_nfs_storage = yes mail_uid = vmail mmap_disable = yes namespace { inbox = yes location = prefix = INBOX. separator = . } passdb { args = /usr/local/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocols = lmtp service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } unix_listener auth-userdb { user = vmail } user = $default_internal_user } service imap-postlogin { executable = script-login /usr/local/bin/imap-postlogin.sh user = vmail } service imap { executable = imap imap-postlogin process_limit = 1024 } service lmtp { inet_listener lmtp { address = * :: port = 24 } process_min_avail = 20 user = vmail } service pop3-postlogin { executable = script-login /usr/local/bin/pop3-postlogin.sh user = vmail } service pop3 { executable = pop3 pop3-postlogin process_limit = 1024 } ssl_cert = </etc/ssl/cert/mail.univ-angers.fr.pem ssl_key = </etc/ssl/cert/mail.univ-angers.fr.key userdb { args = /usr/local/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } File dovecot-ldap.conf.ext uris = ldap://ldap.uang dn = cn=acces-smtp, ou=access, dc=univ-angers, dc=fr dnpass = ********** base = ou=people, dc=univ-angers, dc=fr user_attrs = homeDirectory=home user_filter = (&(|(uid=%u) (mail=%u) (auaAliasEmail=%u))(|(auaStatut=etu)(auaStatut=etu-sortant)(auaStatut=perso)(auaStatut=perso-sortant))) pass_attrs = uid=user,userPassword=password pass_filter = (&(|(uid=%u) (mail=%u) (auaAliasEmail=%u)) (|(auaStatut=etu)(auaStatut=etu-sortant)(auaStatut=perso) (auaStatut=perso-sortant))) iterate_attrs = uid=user iterate_filter = (|(auaStatut=etu)(auaStatut=etu-sortant)(auaStatut=perso)(auaStatut=perso-sortant)) default_pass_scheme = MD5-CRYPT

2 2

[Dovecot] An unconstructive grumble
by dd 03 Jun '13

03 Jun '13

5 hours of configuration attempts, error after confusing error, documentation with examples that only show extracts of working configurations. I really feel like throwing in the towel with dovecot. It should not be this hard and frankly almost impossible to understand and configure for such an incedibly simple configuration. /home/vmail/domain.name/username/cur /home/vmail/domain.name/username/new /home/vmail/domain.name/username/tmp 3 virtual users. All I want is a username and password to access my email. I have to have hit every error and problem there can be. No response at all from server, unable to find password file, unable to recognise user, invalid password. God it went on and on and on for five or more hours. For such a simple config. I know this is a totally unconstructive complaint and I should be taking the time to set out a careful explanation of my problem along with errors and logfiles but I just can't be bothered. I've tried so many many configurations and options and nothing works. How can it possibly be this hard to ghet some emails off the server with simple username/password configurations. Go ahead and flame me to a crisp. -- View this message in context: http://dovecot.2317879.n4.nabble.com/An-unconstructive-grumble-tp42598.html Sent from the Dovecot mailing list archive at Nabble.com.

7 7

[Dovecot] Settings: Dovecot + NTLM + Single Sing On + Windows + Outlook or Thunderbird.
by Maria Jose Yañez Dacosta 03 Jun '13

03 Jun '13

I am following the steps listed in: http://wiki.dovecot.org/HowTo/ActiveDirectoryNtlm My goal is to have single sign-on for Microsoft Outlook applications. I working and I have some doubts since I never set up an imap server, hope I can help :). The version that I have installed is devecot 2.0.9. "dovecot -n" shows the following: # 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-71.el6.x86_64 x86_64 CentOS release 6.4 (Final) auth_use_winbind = yes mbox_write_locks = fcntl passdb { driver = pam } protocols = imap pop3 ssl = no userdb { args = uid=10000 gid=10000 home=/mail/%d/%n driver = static } I show what I have in /etc/samba/smb.conf [global] workgroup = EJEMPLO realm = EJEMPLO.COM.UY server string = %h (Samba %v) security = ADS password server = ad.domain.dom username map = /etc/samba/mapeousuarios map untrusted to domain = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 name resolve order = wins host bcast local master = No domain master = No dns proxy = No wins server = here active directory ip panic action = /usr/share/samba/panic-action %d winbind separator = + winbind use default domain = Yes winbind rpc only = Yes idmap config * : range = 1200-3000 idmap config * : backend = tdb [usuarios3] path = /exports/archivos-usuarios read only = No map acl inherit = Yes store dos attributes = Yes "wbinfo -g" and "wbinfo -u" work well. kinit Administrator work well also. Some steps of the configuration in dovecot.conf does not recognize: 1) "protocols = imap imaps pop3 pop3s". 2) "mechanisms = plain ntlm login". 3) "allow_all_users=yes" y "mail=maildir:/home/vmail/%d/%1Ln/%Ln:INBOX=/home/vmail/%d/%1Ln/%Ln". I'm not sure I should put in place. I also have some doubts: 1) I have to create a keytab file containing the principal for imap and pop?, as it would indicate Dovecot?. 2) That should indicate values uid y el gid? 3) I have to set something in pam? if I make "telnet localhost imap" shows the following: OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN] Dovecot ready NTLM not appears in the options. I hope I can shed some light on the subject :) Thanks and greetings. -- Maria José

2 5

[Dovecot] =Davide Pasquale=
by Davide Pasquale 02 Jun '13

02 Jun '13

http://archiv.isusice.eu/ewcyozyg/fltdigdpmijtefzkeuuepzdutvxu.hnfzuk

1 0

Re: [Dovecot] MS asks for feedback on standards support in Outlook/Exchange
by Robert Schetterer 01 Jun '13

01 Jun '13

Am 01.06.2013 13:40, schrieb Timo Sirainen: > On 1.6.2013, at 9.35, Robert Schetterer <rs(a)sys4.de> wrote: > >> Am 01.06.2013 00:28, schrieb Timo Sirainen: >>> Someone should at least mention that they should support the real SPECIAL-USE instead of just Gmail-specific XLIST.. >> >> i cant see any major Problems recent with i.e outlook 2013 and dovecot >> and SPECIAL-USE, perhaps look the screens at > > What about http://dovecot.org/list/dovecot/2013-May/090489.html ? > --- Outlook 2013 is only working when adding XLIST manually to imap_capability imap_capability = +XLIST --- i dont have this on my servers, and outlook 2013 works with special use as expected perhaps this helps http://social.technet.microsoft.com/Forums/de-DE/officeitpro/thread/eacaa11… --- You're welcome. Regarding your questions: Exchange 2010 and its supported (and unsupported and deviations from) IMAP standards are described on MS-STANXIMAP (MSDN). As far as I can tell, neither XLIST nor the enhanced (=extension of the standard) version of LIST is supported. Please keep in mind that this wouldn't matter very much, since most would connect to an Exchange 2010 server using either ActiveSync or MAPI/RPC. The following scenarios would definitely work: (A) your provider allows connections using ActiveSync (often referred to as "mobile" connection/access) and you're using Outlook 2013, (B) your provider allows connections using MAPI/RPC and you're using Outlook 2010. Outlook 2013 supports the extension specified in RFC 6154 and implements it using the XLIST command (as per MS-STANOIMAP), as documented in MS-STANOIMAP part 2.2.38; however, the LIST command in the same document doesn't mention the extension, so I'd assume it (Outlook 2013) doesn't necessarily support this feature using LIST as specified per RFC6154 (but only using explicitly XLIST.) Usually, any newer IMAP server supporting RFC6154 "LIST" ("XLIST") supports both the older XLIST as well as the newer LIST syntax. If it doesn't, a patch implementing this feature shouldn't be longer than a few (10 maybe?) lines of code and a few kind words to the developer team to get it into the next release of the server in question. --- http://msdn.microsoft.com/en-us/library/ee624430%28v=exchg.80%29.aspx ----------- V0061: The specification describes how to define an experimental command or any command that is not part of the specification. Microsoft Office Outlook 2007, Microsoft Outlook 2010 Outlook does not define any such commands. Microsoft Outlook 2013 Outlook 2013 implements the IMAP LIST extension specified in [RFC6154] as the XLIST command. --------------- so it may more a typical microsoft doku problem *g but however ,in fact no working trouble with dovecot SPECIAL-USE as far i remmeber to that list posting the problem whas there should get fixed was outlooks meaning of the Junk folder stuff, which is basicly done in another way by having its own antispam feature setup, so there are a few way to workaround that problem which i never tested and never will. My simple answer always is, Outlook is the client of exchange, with few stuff supporting normal internet mail ( imap etc ), dont use it with internet mail or live with its problems for notice Horde will implement Outlook 2013 complete active sync stack , so if that will happen, use active sync modus outlook 2013 with calender, abook, push mail , should no need for direct imap server con then, and it should "feel" like using exchnage ( but i think for one account only ), as horde has caldav and carddav , syncml too it can be used as middleware between many clients on many different os types i.e thunderbird lightning and k9 or native androids mail clients in exchange mode Best Regards MfG Robert Schetterer -- [*] sys4 AG http://sys4.de, +49 (89) 30 90 46 64 Franziskanerstraße 15, 81669 München Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263 Vorstand: Patrick Ben Koetter, Axel von der Ohe, Marc Schiffbauer Aufsichtsratsvorsitzender: Florian Kirstein Best Regards MfG Robert Schetterer -- [*] sys4 AG http://sys4.de, +49 (89) 30 90 46 64 Franziskanerstraße 15, 81669 München Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263 Vorstand: Patrick Ben Koetter, Axel von der Ohe, Marc Schiffbauer Aufsichtsratsvorsitzender: Florian Kirstein

1 1

[Dovecot] v2.2.2 (7b1152c83e3e) latest changes break LMTP
by Thomas Leuxner 01 Jun '13

01 Jun '13

Suppose this one breaks it: http://hg.dovecot.org/dovecot-2.2/rev/c4a85c9df948 ==> /var/log/mail.log <== Jun 1 14:01:30 spectre postfix/lmtp[456]: 3bN0qP5kwFzSy: to=<tlx(a)leuxner.net>, relay=spectre.leuxner.net[private/dovecot-lmtp], delay=1481, delays=1481/0/0.01/0.01, dsn=4.3.0, status=deferred (host spectre.leuxner.net[private/dovecot-lmtp] said: 451 4.3.0 <tlx(a)leuxner.net> Temporary internal error (in reply to end of DATA command)) ==> /var/log/dovecot/dovecot.log <== Jun 1 14:01:30 spectre dovecot: lmtp(523): Error: Can't open delivery mail as raw: Invalid mailbox name: Name is empty Regards Thomas

4 7

[Dovecot] real and virtual users
by devocotml＠fuckaround.org 01 Jun '13

01 Jun '13

Hi all! I use debian with real users (pam) and virtual users: I receive mail from virtual users but not from real users. Real users can connect and do login but no email received :-( Any idea? thanks! dovecot -n # 1.2.15: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-686 i686 Debian 6.0.7 log_path: /var/log/dovecot.log log_timestamp: %Y-%m-%d %H:%M:%S protocols: pop3s ssl_cert_file: /etc/dovecot/ssl/dovecotpop.crt ssl_key_file: /etc/dovecot/ssl/dovecotpop.key login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/pop3-login mail_location: maildir:~Maildir mbox_write_locks: fcntl dotlock mail_executable: /usr/lib/dovecot/pop3 mail_plugin_dir: /usr/lib/dovecot/modules/pop3 lda: auth_socket_path: /var/run/dovecot/auth-master postmaster_address: max(a)nuvolabianca.org mail_plugins: sieve log_path: /var/log/dovecot-lda.log log_path: auth default: mechanisms: plain login verbose: yes passdb: driver: passwd-file args: scheme=SHA256 /etc/dovecot/v_users.conf passdb: driver: pam userdb: driver: static args: uid=5000 gid=5000 home=/home/vhosts/%d/%n allow_all_users=yes socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: vmail

1 0

[Dovecot] Fwd: MS asks for feedback on standards support in Outlook/Exchange
by Timo Sirainen 01 Jun '13

01 Jun '13

Someone should at least mention that they should support the real SPECIAL-USE instead of just Gmail-specific XLIST.. Begin forwarded message: > From: Andrew Laurence <atlauren(a)me.com> > Subject: [imapext] MS asks for feedback on standards support in Outlook/Exchange > Date: 1. kesäkuuta 2013 1.18.42 UTC+3.00 > To: HIED-EMAILADMIN(a)LISTSERV.ND.EDU, windows-hied(a)lists.stanford.edu, office365(a)ucdavis.edu, imapext(a)ietf.org > > Hello everyone, > > Forgive the massive list cross-posting, but I thought this noteworthy enough to spread around. > > Via their Openness@Microsoft blog, Microsoft invites input on their standards support in Outlook and Exchange. I'm sure they'd like to hear thoughtful, detailed, insightful responses from the customer world at large. > http://blogs.technet.com/b/openness/archive/2013/05/31/feedback-exchange-se… > > Cheers, > Andrew > -- > Andrew Laurence Office of Information Technology > atlauren(a)uci.edu University of California, Irvine > atlauren(a)me.com (Lists) > > _______________________________________________ > imapext mailing list > imapext(a)ietf.org > https://www.ietf.org/mailman/listinfo/imapext

2 2

[Dovecot] dovecot-lmtp does not work
by He Shiming 01 Jun '13

01 Jun '13

Dear Community, I've got a weird problem regarding lmtp setup with dovecot 2.0.19 on ubuntu 12.04.2 LTS. My reference of the configuration is at https://library.linode.com/email/postfix/postfix2.9.6-dovecot2.0.19-mysql , and my configuration is identical to it with the exception of opening the 110 pop3 port, and enabling plain text auth. Everything from imap, smtp, pop3 (including auth) works except for lmtp. I saw thousands of the following messages in /var/log/mail.log: May 31 09:05:24 postfix/lmtp[3664]: 2FD80321F4: to=<myaddress(a)me.com>, relay=none, delay=0.41, delays=0.41/0/0/0, dsn=4.4.1, status=deferred (connect to me.com[private/dovecot-lmtp]: No such file or directory) And it happens when an incoming email is received. Here's the output of configuration: root@prosp:/etc/dovecot/conf.d# dovecot -n # 2.0.19: /etc/dovecot/dovecot.conf # OS: Linux 3.8.4-linode50 i686 Ubuntu 12.04.2 LTS ext3 auth_mechanisms = plain login disable_plaintext_auth = no mail_location = maildir:/var/mail/vhosts/%d/%n mail_privileged_group = mail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap pop3 sieve service auth-worker { user = vmail } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } unix_listener /var/spool/postfix/private/dovecot-auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { mode = 0600 user = vmail } user = dovecot } service imap-login { inet_listener imap { port = 0 } } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0600 user = postfix } } service pop3-login { inet_listener pop3 { port = 110 } } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_cipher_list = ALL:!LOW:!SSLv2:ALL:!aNULL:!ADH:!eNULL:!EXP:RC4+RSA:+HIGH:+MEDIUM ssl_key = </etc/ssl/private/dovecot.pem userdb { args = uid=vmail gid=vmail home=/var/mail/vhosts/%d/%n driver = static } protocol imap { imap_client_workarounds = delay-newmail mail_max_userip_connections = 10 } protocol pop3 { mail_max_userip_connections = 10 pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } protocol lda { deliver_log_format = msgid=%m: %$ mail_plugins = sieve postmaster_address = postmaster quota_full_tempfail = yes rejection_reason = Your message to <%t> was automatically rejected:%n%r } This problem has been discussed here: http://serverfault.com/questions/512219/dovecot-lmtp-does-not-exist . I've then tried switching from unix socket to inet listener, and still got the same result. I cannot get lmtp service to start. I'm also seeing no errors in the log when dovecot is restarted (see the above link for the log). I'm wondering how do I go about troubleshooting this problem? What might be the possible cause? Is it possible for dovecot to output verbose logs regarding service startups? Thank you. -- Best regards, He Shiming *Kaoya.me <http://kaoya.me> | Goals.io<http://itunes.apple.com/us/app/goals.io-realize-your-dreams/id496228828?ls=…> | Toppin'Wiper <https://itunes.apple.com/app/toppinwiper/id553527232?mt=8> | MediaMan <http://www.imediaman.com>*

2 3

[Dovecot] imapc "moving email to another folder" crashes
by Michael Miller 01 Jun '13

01 Jun '13

Hello List, I am having the same problem with dovecot 2.2.1 on RHEL and dovecot 2.2.2 on FreeBSD and the imapc proxy. moving eMail from one folder to another folder. the error is reproducible. Logfile RHEL/Dovecot 2.2.1: May 31 19:57:45 imap(mail(a)--------.com): Panic: file mail-storage.c: line 2100 (mailbox_copy): assertion failed: (!ctx->unfinished) May 31 19:57:45 imap(mail(a)--------.com): Error: Raw backtrace: /usr/lib64/dovecot/libdovecot.so.0(+0x5f68a) [0x7fd60b76a68a] -> /usr/lib64/dovecot/libdovecot.so.0(+0x5f6d6) [0x7fd60b76a6d6] -> /usr/lib64/dovecot/libdovecot.so.0(+0x1fffa) [0x7fd60b72affa] -> /usr/lib64/dovecot/libdovecot-storage.so.0(+0x792f2) [0x7fd60ba402f2] -> dovecot/imap() [0x40bebb] -> dovecot/imap(command_exec+0x3d) [0x41502d] -> dovecot/imap() [0x414190] -> dovecot/imap() [0x41427d] -> dovecot/imap(client_handle_input+0x11d) [0x4144fd] -> dovecot/imap(client_input+0x6f) [0x41486f] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_call_io+0x36) [0x7fd60b7799d6] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_handler_run+0xa7) [0x7fd60b77aa87] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_run+0x28) [0x7fd60b779978] -> /usr/lib64/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7fd60b72fa63] -> dovecot/imap(main+0x2a9) [0x41dcf9] -> /lib64/libc.so.6(__libc_start_main+0xfd) [0x7fd60b396cdd] -> dovecot/imap() [0x40a579] May 31 19:57:45 imap(mail(a)--------.com): Fatal: master: service(imap): child 27742 killed with signal 6 (core dumped) Logfile FreeBSD / Dovecot 2.2.2: May 31 19:53:41 imap(mail(a)--------.com): Panic: file mail-storage.c: line 2105 (mailbox_copy): assertion failed: (!ctx->unfinished) May 31 19:53:41 imap(mail(a)--------.com): Fatal: master: service(imap): child 2077 killed with signal 6 (core not dumped) the configuration is more or less the same on both: # 2.2.1: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-358.6.2.el6.x86_64 x86_64 CentOS release 6.4 (Final) auth_mechanisms = plain login first_valid_uid = 97 imapc_host = imap.upstreamserver.com log_path = /var/log/dovecot.log mail_gid = dovecot mail_home = /clusterdata2/imapcache/%u mail_location = imapc:~/imapc mail_uid = dovecot passdb { args = host=imap.upstreamserver.com default_fields = userdb_imapc_user=%u userdb_imapc_password=%w driver = imap } protocols = imap service auth { unix_listener auth-client { mode = 0666 user = dovecot } } service imap { drop_priv_before_exec = yes } ssl_cert = </etc/ssl/imap-myserver-de.crt ssl_key = </etc/ssl/imap_myserver-de.key userdb { driver = prefetch } and finally the coredump from RHEL/Dovecot 2.2.1: # gdb /usr/libexec/dovecot/imap core GNU gdb (GDB) Red Hat Enterprise Linux (7.2-60.el6_4.1) Copyright (C) 2010 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-redhat-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /usr/libexec/dovecot/imap...(no debugging symbols found)...done. [New Thread 27742] Reading symbols from /usr/lib64/dovecot/libdovecot-storage.so.0...(no debugging symbols found)...done. Loaded symbols for /usr/lib64/dovecot/libdovecot-storage.so.0 Reading symbols from /usr/lib64/dovecot/libdovecot.so.0...(no debugging symbols found)...done. Loaded symbols for /usr/lib64/dovecot/libdovecot.so.0 Reading symbols from /lib64/libc.so.6...(no debugging symbols found)...done. Loaded symbols for /lib64/libc.so.6 Reading symbols from /lib64/librt.so.1...(no debugging symbols found)...done. Loaded symbols for /lib64/librt.so.1 Reading symbols from /lib64/libdl.so.2...(no debugging symbols found)...done. Loaded symbols for /lib64/libdl.so.2 Reading symbols from /lib64/ld-linux-x86-64.so.2...(no debugging symbols found)...done. Loaded symbols for /lib64/ld-linux-x86-64.so.2 Reading symbols from /lib64/libpthread.so.0...(no debugging symbols found)...done. [Thread debugging using libthread_db enabled] Loaded symbols for /lib64/libpthread.so.0 Reading symbols from /lib64/libnss_files.so.2...(no debugging symbols found)...done. Loaded symbols for /lib64/libnss_files.so.2 Reading symbols from /lib64/libgcc_s.so.1...(no debugging symbols found)...done. Loaded symbols for /lib64/libgcc_s.so.1 Core was generated by `dovecot/imap'. Program terminated with signal 6, Aborted. #0 0x00007fd60b3aa8a5 in raise () from /lib64/libc.so.6 Missing separate debuginfos, use: debuginfo-install dovecot-2.2.1-0_134.el6.x86_64 (gdb) bt full #0 0x00007fd60b3aa8a5 in raise () from /lib64/libc.so.6 No symbol table info available. #1 0x00007fd60b3ac085 in abort () from /lib64/libc.so.6 No symbol table info available. #2 0x00007fd60b76a698 in ?? () from /usr/lib64/dovecot/libdovecot.so.0 No symbol table info available. #3 0x00007fd60b76a6d6 in ?? () from /usr/lib64/dovecot/libdovecot.so.0 No symbol table info available. #4 0x00007fd60b72affa in i_panic () from /usr/lib64/dovecot/libdovecot.so.0 No symbol table info available. #5 0x00007fd60ba402f2 in mailbox_copy () from /usr/lib64/dovecot/libdovecot-storage.so.0 No symbol table info available. #6 0x000000000040bebb in ?? () No symbol table info available. #7 0x000000000041502d in command_exec () No symbol table info available. #8 0x0000000000414190 in ?? () No symbol table info available. #9 0x000000000041427d in ?? () No symbol table info available. #10 0x00000000004144fd in client_handle_input () No symbol table info available. #11 0x000000000041486f in client_input () No symbol table info available. #12 0x00007fd60b7799d6 in io_loop_call_io () from /usr/lib64/dovecot/libdovecot.so.0 No symbol table info available. #13 0x00007fd60b77aa87 in io_loop_handler_run () from /usr/lib64/dovecot/libdovecot.so.0 No symbol table info available. #14 0x00007fd60b779978 in io_loop_run () from /usr/lib64/dovecot/libdovecot.so.0 No symbol table info available. #15 0x00007fd60b72fa63 in master_service_run () from /usr/lib64/dovecot/libdovecot.so.0 No symbol table info available. #16 0x000000000041dcf9 in main () No symbol table info available. (gdb) any ideas ?

2 2

[Dovecot] LDA/LMTP - saving to INBOX fallback on tempfail?
by Timo Sirainen 31 May '13

31 May '13

Currently if saving to mailbox fails for any reason, the mail is saved to INBOX instead. Same if a Sieve redirect fails, the mail is saved to INBOX. I'm wondering if anyone actually prefers this behavior when the error is temporary? For example if some index file corruption was detected, the save will most likely succeed the next time it's attempted. Or if the redirect fails because the SMTP server can't be connected to at the moment. So I was thinking about changing v2.2 LDA/LMTP to simply return temporary failure instead of saving the mail to INBOX.

3 5

Re: [Dovecot] dovecot Digest, Vol 121, Issue 84
by Arun Gupta 31 May '13

31 May '13

Thanks...... On Fri, 31 May 2013, dovecot-request(a)dovecot.org wrote: > Send dovecot mailing list submissions to > dovecot(a)dovecot.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://dovecot.org/cgi-bin/mailman/listinfo/dovecot > or, via email, send a message with subject or body 'help' to > dovecot-request(a)dovecot.org > > You can reach the person managing the list at > dovecot-owner(a)dovecot.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of dovecot digest..." > > > Today's Topics: > > 1. Re: IMAP QUOTA (Steffen) > 2. Settings: Dovecot + NTLM + Single Sing On + Windows + Outlook > or Thunderbird. (Maria Jose Ya?ez Dacosta) > 3. Re: Settings: Dovecot + NTLM + Single Sing On + Windows + > Outlook or Thunderbird. (Charles Marcus) > 4. Re: IMAP QUOTA (Timo Sirainen) > 5. Re: Settings: Dovecot + NTLM + Single Sing On + Windows + > Outlook or Thunderbird. (Maria Jose Ya?ez Dacosta) > 6. Re: Dovecot mysql replication (Robert Schetterer) > 7. Re: Dovecot mysql replication (Noel Butler) > 8. Re: Dovecot mysql replication (Noel Butler) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 30 May 2013 17:09:27 +0200 > From: Steffen <skdovecot(a)smail.inf.fh-brs.de> > To: Dovecot Mailing List <dovecot(a)dovecot.org> > Subject: Re: [Dovecot] IMAP QUOTA > Message-ID: <51A76BA7.8040501(a)smail.inf.fh-brs.de> > Content-Type: text/plain; charset=ISO-8859-1 > > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Arun Gupta wrote: >> >> I read about Snarf plugin, it works if the mail already in spool >> area, but I want to know whether it is possible if users quota >> exceeded then instead of mail rejected it should delived to user >> spool area or somewhere else. > > I understand and you should consider Charles' advice :-) > > This is something your MDA should do. Neither the Dovecot LMTP server > nor the current Dovecot deliver can do so. But deliver is rather > small, so you could hack it in. > > Or use Dovecot deliver in combination with Snarf and a MDA wrapper, e.g.: > > The wrapper script first checks, if the recipient is over quota, in > that case use another maildrop programm, such as procmail, that > delivers the message to a spool area; otherwise call Dovecot deliver > with the usual arguments. Or if you call Dovecot deliver and it exits > with exit code 69 (Tempfailure), call that other MDA. > > Then let Snarf pull the messages into the INBOX next time. > > - -- > Steffen > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.9 (Darwin) > Comment: Using GnuPG with undefined - http://www.enigmail.net/ > > iQEVAwUBUadrp13r2wJMiz2NAQIpiAf+JSeuZns89NoJV5aW2Li4myLp209HycHt > j3varTiBYgekw1vMAhDXYH/RKnMwWlOFSe15YIMTcCIY8gjTIqCx6YA/W1cJVZL+ > 3zRVA/75t3CsAFx70/+fecrZJnY6u0Ok7VUXJ4DAxdJgsOyqXZy9/6bt+t43TcaT > pUlug3nAmIP9GwZ2GQFGkEFxfD74EPVRVg8opAZzTaSPuv/IfKsC8f4RA64JtQ2S > EACc/nEC4xVmjDAz/9cpLLsWiLlYfy/cEDIw49XA2MrQsIIS7qkHcDLawuqsVsAk > HHXX/iqmcRBtznpO94XS9SCtvUa/5fDkVYv56uuDazEHpy4urBrtyA== > =Qo2f > -----END PGP SIGNATURE----- > > > ------------------------------ > > Message: 2 > Date: Thu, 30 May 2013 12:34:24 -0300 > From: Maria Jose Ya?ez Dacosta <mariajose1982(a)gmail.com> > To: dovecot(a)dovecot.org > Subject: [Dovecot] Settings: Dovecot + NTLM + Single Sing On + Windows > + Outlook or Thunderbird. > Message-ID: > <CAHQv7acLG6X23w3vxhUtdR2RkSBAXhMHM+uSi9zASbUjtfstXA(a)mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > I am following the steps listed in: > http://wiki.dovecot.org/HowTo/ActiveDirectoryNtlm > > My goal is to have single sign-on for Microsoft Outlook applications. > > I working and I have some doubts since I never set up an imap server, hope > I can help :). > > The version that I have installed is devecot 2.0.9. > > "dovecot -n" shows the following: > > # 2.0.9: /etc/dovecot/dovecot.conf > # OS: Linux 2.6.32-71.el6.x86_64 x86_64 CentOS release 6.4 (Final) > auth_use_winbind = yes > mbox_write_locks = fcntl > passdb { > driver = pam > } > protocols = imap pop3 > ssl = no > userdb { > args = uid=10000 gid=10000 home=/mail/%d/%n > driver = static > } > > I show what I have in /etc/samba/smb.conf > > [global] > workgroup = EJEMPLO > realm = EJEMPLO.COM.UY > server string = %h (Samba %v) > security = ADS > password server = ad.domain.dom > username map = /etc/samba/mapeousuarios > map untrusted to domain = Yes > syslog = 0 > log file = /var/log/samba/log.%m > max log size = 1000 > name resolve order = wins host bcast > local master = No > domain master = No > dns proxy = No > wins server = here active directory ip > panic action = /usr/share/samba/panic-action %d > winbind separator = + > winbind use default domain = Yes > winbind rpc only = Yes > idmap config * : range = 1200-3000 > idmap config * : backend = tdb > > [usuarios3] > path = /exports/archivos-usuarios > read only = No > map acl inherit = Yes > store dos attributes = Yes > > > "wbinfo -g" and "wbinfo -u" work well. > > kinit Administrator work well also. > > Some steps of the configuration in dovecot.conf does not recognize: > > 1) "protocols = imap imaps pop3 pop3s". > > 2) "mechanisms = plain ntlm login". > > 3) "allow_all_users=yes" y > "mail=maildir:/home/vmail/%d/%1Ln/%Ln:INBOX=/home/vmail/%d/%1Ln/%Ln". > > I'm not sure I should put in place. > > I also have some doubts: > > 1) I have to create a keytab file containing the principal for > imap and pop?, as it would indicate Dovecot?. > > 2) That should indicate values uid y el gid? > > 3) I have to set something in pam? > > if I make "telnet localhost imap" shows the following: > > OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE > AUTH=PLAIN] Dovecot ready > > NTLM not appears in the options. > > I hope I can shed some light on the subject :) Thanks and greetings. > > > -- Regards, Arun Kumar Gupta Mail Administrator National PARAM Supercomputing Facility (NPSF) Centre for Development of Advanced Computing Ganeshkhind Road Pune University Campus PUNE-Maharastra Phone : +91-20-25704347 WEB : http://www.cdac.in/ ------------------------------------------------------------------------------------------------------------------------------- This e-mail is for the sole use of the intended recipient(s) and may contain confidential and privileged information. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies and the original message. Any unauthorized review, use, disclosure, dissemination, forwarding, printing or copying of this email is strictly prohibited and appropriate legal action will be taken. -------------------------------------------------------------------------------------------------------------------------------

1 0

[Dovecot] IMAP QUOTA
by Arun Gupta 30 May '13

30 May '13

Hi, I configured imap quota on dovecot-2.0 with backend Maildir++, after exceeding user quota the sender receiving bounce mails, Is there any way that after exceeding user quota the mail will deliver somewhere else like user spool area? so that after increasing quota user will get the mails. -- Regards, Arun Kumar Gupta ------------------------------------------------------------------------------------------------------------------------------- This e-mail is for the sole use of the intended recipient(s) and may contain confidential and privileged information. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies and the original message. Any unauthorized review, use, disclosure, dissemination, forwarding, printing or copying of this email is strictly prohibited and appropriate legal action will be taken. -------------------------------------------------------------------------------------------------------------------------------

4 3

Re: [Dovecot] IMAP QUOTA
by Arun Gupta 30 May '13

30 May '13

Hi, Thanks for replying... Dear Steffen I search about "slurp" plugin but didn't get it if possible kindly provde me the doc, link etc for the same. Regards, Arun Gupta On Tue, 28 May 2013, Arun Gupta wrote: > I configured imap quota on dovecot-2.0 with backend Maildir++, after > exceeding user quota the sender receiving bounce mails, Is there any way that > after exceeding user quota the mail will deliver somewhere else like user > spool area? so that after increasing quota user will get the mails. Check out the "slurp" plugin and let your MTA deliver mails to, say, /var/mail/<uid> . You will have no Sieve rules then, I think. However, some sort of quota enforcing you will need there, too. - -- Steffen Kaiser ------------------------------------------------------------------------------------------------------------------------------- This e-mail is for the sole use of the intended recipient(s) and may contain confidential and privileged information. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies and the original message. Any unauthorized review, use, disclosure, dissemination, forwarding, printing or copying of this email is strictly prohibited and appropriate legal action will be taken. -------------------------------------------------------------------------------------------------------------------------------

4 4

[Dovecot] Sieve/pigeonhole with Exim and Dovecot LDA
by Sebastian Arcus 30 May '13

30 May '13

I am trying to configure my Dovecot installation to provide Vacation/Out-of-the-office emails using the Sieve plugin. My setup is a little bit peculiar: Internet Internet | ^ V | Provider's POP3 server Provider's SMTP server | ^ V | -------------- getmail | my server | | V | Dovecot LDA ---> Sieve/vacation -----> Exim | V Dovecot my server --------------- Sorry for the ASCII art above - I thought it would be quicker than trying to explain. The trouble I'm having is getting the Dovecot LDA to send successfully through the local exim instance out-of-office replies back to the provider's smtp server - when receiving fresh email from the provider (through getmail). Dovecot LDA tries to send the replies - but Exim freezes them because they don't contain the sender data in the format Exim wants it. Exim can either receive sender info: 1. On the command line, after the "-f" command line switch (but only when called by root or other users passed under "trusted_users" in exim.conf). 2. In the header of the email - in the "From:" field - but only, apparently, if it was called with the "-t" switch. Full exim command line documentation here: http://www.exim.org/exim-html-current/doc/html/spec_html/ch-the_exim_comman… I can't figure out what command line options the Dovecot LDA is using when calling exim. I also couldn't find a way to get Dovecot LDA to pass extra options to exim, when trying to send email. The exim log has the following: 2013-05-20 15:35:15 1UeRBB-0001xc-Ar Frozen (message created with -f <>) I've inspected the frozen message - and it has the correct sender in the "From:" field - but it seems that exim isn't using that, because it wasn't called with the "-t" option. In dovecot.conf, I have the following for Dovecot LDA and sieve: protocols = imap sieve protocol lda { log_path = /var/log/dovecot/dovecot-deliver.log info_log_path = /var/log/dovecot/dovecot-deliver-info.log postmaster_address = admin(a)mydomain.co.uk hostname = mydomain.co.uk mail_plugins = sieve mail_plugin_dir = /usr/lib/dovecot sendmail_path = /usr/sbin/exim } service managesieve-login { inet_listener sieve { port = 4190 } } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } Dovecot LDA is called by getmail using the vmail user - and using the same user it is trying to call exim to deliver the out-of-office replies. I'm using Dovecot 2.2.1 with pigeonhole 0.4.0. I can post the rest of dovecot.conf if it would help. I've read through the stuff at dovecot.org - but all the Dovecot LDA and exim info refers to Exim passing email to Dovecot using Dovecot LDA - not Dovecot LDA sending email out using Exim.

2 8

Re: [Dovecot] Dovecot 2.2 build rpm on Centos6
by Burak GÜRER 30 May '13

30 May '13

On 30-05-2013 10:52, Arto Saraniva wrote: > >> -----Original Message----- >> From: dovecot-bounces(a)dovecot.org [mailto:dovecot-bounces@dovecot.org] >> On Behalf Of Burak GÜRER >> Sent: Thursday, May 30, 2013 10:34 AM >> To: Nikolaos Milas >> Cc: Dovecot Mailing List >> Subject: Re: [Dovecot] Dovecot 2.2 build rpm on Centos6 >> >> On 27-05-2013 16:56, Nikolaos Milas wrote: >>> On 27/5/2013 1:07 μμ, Birta Levente wrote: >>> >>>> I tried to build rpm based on dovecot-2.2.2-2.fc20.src.rpm on Centos >>>> 6.4 >>> You may want to try: >>> >>> dovecot-2.2.2-2.noa.el6.src.rpm >>> >>> which produces: >>> >>> dovecot-2.2.2-2.noa.el6.x86_64.rpm >>> dovecot-debuginfo-2.2.2-2.noa.el6.x86_64.rpm >>> dovecot-devel-2.2.2-2.noa.el6.x86_64.rpm >>> dovecot-mysql-2.2.2-2.noa.el6.x86_64.rpm >>> dovecot-pgsql-2.2.2-2.noa.el6.x86_64.rpm >>> dovecot-pigeonhole-2.2.2-2.noa.el6.x86_64.rpm >>> >>> available at: http://www.noa.gr/rpmfiles/ >>> >>> This package is using LTB Project's Openldap RPMs for LDAP linking: >>> >>> http://ltb-project.org/wiki/download#openldap >>> >>> The above Dovecot SRPM has evolved from fakessh's rpms: >>> http://ns.fakessh.eu/rpms/ and I like it because it is clean and >> clear >>> (to me, at least). >>> >>> Nick >> another question.. anybody built dovecot 2.2 on rhel/centos 5 >> >> there is any knowhow or any builded pack > http://www.city-fan.org/ftp/contrib/mail/ > > -arto > thanks arto

1 0

[Dovecot] Dovecot 2.2 build rpm on Centos6
by Birta Levente 30 May '13

30 May '13

Hi list, I tried to build rpm based on dovecot-2.2.2-2.fc20.src.rpm on Centos 6.4 rpmbuild --define 'rhel 64' -ba dovecot-2.2.spec I get this error: checking for C compiler default output file name... configure: error: in `/home/builder/rpmbuild/BUILD/dovecot-2.2.2': configure: error: C compiler cannot create executables See `config.log' for more details. (config.log attached) What I missing? I'm not totally beginner, built dovecot 2.1 rpm-s many times same way like this, but not know mutch about building rpms and with this I just can get to work. Thank you! Levi

6 10

[Dovecot] Perfect LDAP tree
by Evgeny Basov 30 May '13

30 May '13

Hello everybody and Timo. I have the next problem. With LDAP tree like ou=mail | - dc=example1.com,ou=Mail | - mail=box1(a)example1.com,dc=example1.com,ou=Mail | - mail=box2(a)example1.com,dc=example1.com,ou=Mail … | - dc=example2.com,ou=Mail | - mail=box1(a)example2.com,dc=example2.com,ou=Mail | - mail=box2(a)example2.com,dc=example2.com,ou=Mail … and settings in dovecot configuration files auth_bind = yes auth_bind_userdn = mail=%u,dc=%d,ou=mail base = ou=mail user_attrs = \ =home=/var/vmail/%Ld/%Ln, \ =quota_rule=*:storage=%{ldap:mailQuota}M user_filter = (&(objectClass=mailUser)(accountStatus=active)(mail=%u)) pass_attrs = \ =user=%{ldap:mail}, \ =proxy_maybe=yes, \ =host=%{ldap:mailHost}, \ =userdb_home=/var/vmail/%Ld/%Ln, \ =userdb_quota_rule=*:storage=%{ldap:mailQuota}M pass_filter = (&(objectClass=mailUser)(accountStatus=active)(mail=%u)) iterate_attrs = mail=user iterate_filter = (&(objectClass=mailUser)(accountStatus=active)) all works fine. But my soul of perfectionist do not like this configuration because in every mailbox record duplicated information about domain: mail=box1(a)example2.com and dc=example2.com I want to set next LDAP tree ou=mail | - dc=example1.com,ou=Mail | - mail=box1,dc=example1.com,ou=Mail | - mail=box2,dc=example1.com,ou=Mail … | - dc=example2.com,ou=Mail | - mail=box1,dc=example2.com,ou=Mail | - mail=box2,dc=example2.com,ou=Mail … but I don't understand how to limit query to box1(a)example1.com in dc=example1.com,ou=mail without using base=dc=%d,ou=Clients,o=m and how to get working iterate query for all boxes to get list box1(a)example1.com box2(a)example1.com box1(a)example2.com box2(a)example2.com in some command like doveadm quota recalc -A. Is it possible? How to take it?

2 2

[Dovecot] imap/pop problem
by MP Netsai 30 May '13

30 May '13

Dear All, I hope you can help me on this trouble i am getting. I cant seem to get email even though i have given the correct directory for mail location. Here is my config: ===== # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-4-amd64 x86_64 Debian 7.0 ext4 auth_mechanisms = plain login disable_plaintext_auth = no first_valid_uid = 1001 last_valid_uid = 1001 mail_debug = yes mail_gid = exim mail_location = maildir:/var/mail/virtual/%d/%n mail_uid = exim namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = " imap pop3" service auth { unix_listener auth-userdb { group = exim mode = 0600 user = exim } } ssl_cert = </usr/local/etc/exim/exim.cert ssl_key = </usr/local/etc/exim/exim.key userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol pop3 { pop3_uidl_format = %08Xu%08Xv } ===== the virtual email directory is as follows: ===== root@peyote:/var/mail/virtual# ls -l drwx------ 9691 exim exim 266240 May 28 16:17 mydomain.co.zw ===== Mail is moving ok, into the virtual directory. I just cant seem to pop them out of there. I hope someone can get to point me in the right direction. Regards,

2 2

Re: [Dovecot] system account delivery userdb authentication
by Ben Morrow 29 May '13

29 May '13

[Please keep replies on the list.] At 6AM +0200 on 29/05/13 you (Yann Shukor) wrote: > > Although simpler to set up, I chose to steer clear of the single user > representing 'all' because I liked the idea of giving users access to > Usermin allowing them to manage their own password and vacation msg > (+filtering, ...) and furthermore they could login with their username > (domain-less). While it's often convenient to make a distinction between 'system' and 'virtual' users, Dovecot doesn't actually know the difference. It just looks users up in the passdb and userdb you have configured. This means it's perfectly straightforward to do a completely 'virtual user' setup, and then change the passdb to 'pam', which will let the users log in with their ordinary Unix password. To allow users to log in with just a username, all you need to do is make sure the users in the userdb and passdb are listed that way. Userdb passwd and passdb pam naturally are, but there's nothing to stop you using other userdbs if you want to. The only trick here is that if you're using LDA/LMTP then incoming deliveries will (or, at least, usually should) be addressed to a full email address, so you need auth_username_format to trim that back to a username. I don't know anything about Usermin, but if it is trying to set up traditional procmail filtering and vacation(1), you may be in trouble. Or, at least, you may have to give up on using Dovecot to deliver the mail and let Postfix's local(8) and procmail deliver it into maildirs themselves. If you're happy with this, this isn't a problem for Dovecot, but it might be better to go with Sieve filtering instead. Sieve is a newish mail filtering language, designed primarily to be safe (procmail has a nasty habit of letting users run arbitrary programs). Dovecot's LDA has a pretty complete sieve implementation called Pigeonhole (you may need to install it separately), which also supports a protocol called ManageSieve designed for uploading sieve scripts remotely. There are plugins for some webmail systems (and some desktop mail clients, for that matter) which let the user edit their filters in a gooey way; this includes setting up vacation messages. I use Roundcube webmail for this purpose; it also has a perfectly good PAM password- changing plugin. Ben

1 0

[Dovecot] dsync
by Erik Colson 29 May '13

29 May '13

Hi Is dovecot dsync considered an alternative to offlineimap (or others) when both distant and local are IMAP dovecot servers ? I used offlineimap for this, but somehow offlineimap got messed up (more than once, but without me able to explain how it happened). So I'm considering dsync for this purpose... Thanks! -- erik

1 0

[Dovecot] Enable IMAP only for certain users/IP
by Simone Marx :: Edinet Srl 29 May '13

29 May '13

Hi, I'm trying to config dovecot to enable IMAP protocol only for certain IPs and users. The logical steps I've followed are: 1. If a user is trying to login from an IP that I've authorized ( listed in a file) the request is authorized. 2. If not, if the user is listed in a second file the request is authorized. 3. If also this check fails the request is rejected. I'm using PAM for passdb and a passwd-file for userdb: passdb { driver = pam args = session=yes failure_show_msg=yes max_requests=16 cache_key=%u%r%l dovecot-%s } userdb { driver = passwd-file args = /etc/passwd-dovecot } In /etc/pam.d/ there are two files: dovecot-pop3 dovecot-imap dovecot-pop3: #%PAM-1.0 @include common-auth @include common-account @include common-session (for this protocol everything works fine, I don't want to limit it.) dovecot-imap: #%PAM-1.0 @include common-auth auth sufficient pam_listfile.so item=rhost sense=allow file=/etc/dovecot/imaphosts onerr=fail auth required pam_listfile.so item=user sense=allow file=/etc/dovecot/imapusers onerr=fail @include common-account @include common-session If I'm not wrong, once the user is authenticated, PAM checks if the remote IP address is in imaphosts; if it's true, it returns PAM_SUCCESS and stops the execution of the auth block, else if it's false, PAM executes the next line, verifying the presence of the username in imapusers file; if found, then return PAM_SUCCESS, else fail. If this can work, I've a problem with pam_listfile.so and IP addresses: I want to do something smarter than specifying 2^11 IP addresses instead a /21 or IP/netmask Are there alternatives for doing it better? Thanks. Sincerely, Simone Marx.

2 4

[Dovecot] Corrupt index file zlib
by Paul Lim 29 May '13

29 May '13

Hi, I'm getting this error constantly on a couple of folders. No matter what I do it keeps recurring. -- 2013-05-29 14:15:03 imap(nj(a)***.com.au): Error: Cached message size smaller than expected (2551 < 8192) 2013-05-29 14:15:03 imap(nj(a)***.com.au): Error: Maildir filename has wrong S value, renamed the file from /home/***.com.au/nj/.***.Builders/cur/1369030267.M775209P12595.pygmy,S= /2551:2,S to /home/***.com.au/nj/.***.Builders/cur/1369030267.M775209P12595.pygmy,S= /2551:2,S 2013-05-29 14:15:03 imap(nj(a)***.com.au): Error: Corrupted index cache file /home/archarch.com.au/nj/.***.Builders/dovecot.index.cache: Broken /physical size for mail UID 13 2013-05-29 14:15:03 imap(nj(a)***.com.au): Error: Cached message size smaller than expected (2551 < 8284) 2013-05-29 14:15:03 imap(nj(a)***.com.au): Error: Maildir filename has wrong S value, renamed the file from /home/***.com.au/nj/.***.Builders/cur/1369030267.M775209P12595.pygmy,S= /2551:2,S to /home/***.com.au/nj/.***.Builders/cur/1369030267.M775209P12595.pygmy,S= /2551:2,S 2013-05-29 14:15:03 imap(nj(a)***.com.au): Error: Corrupted index cache file /home/archarch.com.au/nj/.***.Builders/dovecot.index.cache: Broken /physical size for mail UID 13 2013-05-29 14:15:03 imap(nj(a)***.com.au): Error: read(/home/***.com.au/nj/.***.Builders/cur/1369030267.M775209P12595. pygmy,S=2551:2,S) failed: Input/output error (uid=13) --- stuff I've done: - Deleted dovecot* in .Builders/ - run maildir-size-fix.pl -v -r -f- c on .Builders/ - delete and recreate the folder Dovecot 2.1.7 (wheezy) zlib enabled maildir_broken_filename_sizes = yes There are only 6 emails, so it's only building dovecot.index.log, not the cache file --- dovecot-uidlist --- 3 V1317717759 N1 G1b2d4a37936fa551430d0000c0318918 1 :1369030267.M775209P12595.pygmy,S=8284 2 :1369030564.M957106P12595.pygmy,S=13188 3 :1369030568.M223636P12595.pygmy,S=23270 4 :1369030568.M223637P12595.pygmy,S=10813 5 :1369030568.M223638P12595.pygmy,S=58600 6 :1369030615.M783237P12595.pygmy,S=9677 7 :1369030267.M775209P12595.pygmy,S=2551 8 :1369030564.M957106P12595.pygmy,S=3560 ----- --- ls cur --- 1369030267.M775209P12595.pygmy,S=8284:2,S 1369030564.M957106P12595.pygmy,S=13188:2,RS 1369030568.M223636P12595.pygmy,S=23270:2,RS 1369030568.M223637P12595.pygmy,S=10813:2,RS 1369030568.M223638P12595.pygmy,S=58600:2,RS 1369030615.M783237P12595.pygmy,S=9677:2,RS ---- It all seems to match... but it continues to break. If I delete the first email file, it breaks on the next one as well. Any thoughts?? I'm thinking I'll probably disable zlib if I can't find a solution... will this mean I have to decompress all the compressed emails? cheers Paul

2 3

[Dovecot] Dovecot 2.1.7-7 only allow localhost access to IMAP and POP3
by Torben Schou Jensen 29 May '13

29 May '13

Recently I have upgraded my server to Debian 7. Debian have now removed uw-imapd and suggest using dovecot instead. Debian include dovecot version 2.1.7-7. On http://www.debian-administration.org/articles/275 and http://www.debian-administration.org/articles/200 I can read how to setup older version of dovecot with SquirrelMail. They recommend to use uncrypted IMAP when SquirrelMail is on same server. What I would like to support is then imap, imaps, pop3 and pop3s. imaps and pop3s for external users. imap and pop3 only open for localhost, that is SquirrelMail on same machine. With dovecot 1 you could restrict access using "imap_listen = localhost" How do I make the same restriction with localhost on dovecot 2 ??? Brgds Torben

3 2

[Dovecot] dsync Panic: Unknown key: send_mail_requests
by Oli Schacher 29 May '13

29 May '13

Hi Timo With the current dovecot hg we're getting dsync replication errors "Panic: Unknown key: send_mail_requests" followed by a crash. This seems to have been introduced somewhere around http://hg.dovecot.org/dovecot-2.2/rev/4883a8e1db13 Log output from latest hg, 2.2.2 (e7c474011934+): May 29 09:30:53 munged03 dovecot: doveadm(luke(a)example.com): Panic: Unknown key: send_mail_requests May 29 09:30:53 munged03 dovecot: doveadm(luke(a)example.com): Error: Raw backtrace: /usr/lib64/dovecot/libdovecot.so.0(+0x5f7da) [0x7f84f84637da] -> /usr/lib64/dovecot/libdovecot.so.0(+0x5f826) [0x7f84f8463826] -> /usr/lib64/dovecot/libdovecot.so.0(+0x2006a) [0x7f84f842406a] -> dovecot/doveadm-server() [0x42c41b] -> dovecot/doveadm-server() [0x42908b] -> dovecot/doveadm-server(dsync_brain_master_init+0x1c9) [0x4186f9] -> dovecot/doveadm-server() [0x416606] -> dovecot/doveadm-server() [0x40c94f] -> dovecot/doveadm-server() [0x414b7a] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_call_io+0x36) [0x7f84f8472b66] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_handler_run+0xa7) [0x7f84f8473c17] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_run+0x28) [0x7f84f8472b08] -> /usr/lib64/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f84f8428ae3] -> dovecot/doveadm-server(main+0x121) [0x4152c1] -> /lib64/libc.so.6(__libc_start_main+0xfd) [0x34de41ecdd] -> dovecot/doveadm-server() [0x40c1b9] May 29 09:30:53 munged03 dovecot: doveadm(luke(a)example.com): Fatal: master: service(doveadm): child 49077 killed with signal 6 (core dumped) dovecot -n is attached Best regards Oli -- message transmitted on 100% recycled electrons

2 1

[Dovecot] Email migration
by Romer Ventura 29 May '13

29 May '13

Hello, So I am currently running dovecot 1.2.11 on Debian 5 for our production email systems. We just deployed some new Debian 7 servers and we will be upgrading to the latest dovecot version. I've been reading the docs, but I wanted to heard some feedback on the import of all my current email into the new installation. We have 320GB worth of email. Any gotchas I should be prepared for? Any complications I should be aware of when importing all these data? Any thoughts would be appreciated. Thanks. <BR CLEAR="ALL"> <hr style="border: 1px solid #CCC;"> <p style="font-style:italic; font-size:8pt; font-family:verdana; color:gray;">This document and attachments may contain technical data controlled under the U.S. International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR) and may not be exported to a Foreign Person, either in the U.S. or abroad, without the proper authorization by the U.S. Department of State or Department of Commerce, whichever is applicable. CONFIDENTIALITY NOTE: This electronic transmission, including all attachments, is directed in confidence solely to the person(s) to whom it is addressed, or an authorized recipient, and may not otherwise be distributed, copied or disclosed. The contents of the transmission may also be subject to intellectual property rights and such rights are expressly claimed and are not waived. If you have received this transmission in error, please notify the sender immediately by return electronic transmission and then immediately delete this transmission, including all attachments, without copying, distributing or disclosing same. The recipient should check this e-mail and any attachments for the presence of viruses. Houston Sigma Technologies L.P. accepts no liability for any damage caused by any virus transmitted by this e-mail.</p>

2 1

[Dovecot] system account delivery userdb authentication
by Yann Shukor 29 May '13

29 May '13

Hi I have a remaining issue with a mail server setup. Composed of Postfix and Dovecot it is is a 'local' mail server At first I relied upon Mysql to store the various parameters, and then switched to a flat file approach I also initially set the server up to handle virtual users, but then I realized that it was destined to manage local system accounts only. So I reconfigured it accordingly Relying on system accounts for authentication means that the domain name component is absent from the username (as opposed to virtual user identifiers) This caused me some difficulty at first with roundcube, but I was able to get around it through a manual adjustment in Mysql The remaining aspect that isn't working is the delivery of emails. The entry in master.cf for dovecot looks looks this: dovecot unix - n n - - pipe flags=DRhu user=mail:mail argv=/usr/lib/dovecot/deli ver -d ${recipient} The problem is that the recipient equates to the users email address, which can't in fact be used for authentication purposes with system accounts. I then tried replacing recipient with user: dovecot unix - n n - - pipe flags=DRhu user=mail:mail argv=/usr/lib/dovecot/deliver -d ${user} There seems to be a rights issue because I get the following error: dovecot Fatal: setgid(100(users)) failed with euid=8(mail), gid=8(mail), egid=8(mail): Operation not permitted Any ideas ? thanks yann # 1.2.15: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-686 i686 Debian 6.0.7 ext4 log_timestamp: %d-%m-%Y %H:%M:%S protocols: imap imaps pop3 pop3s ssl_cert_file: /etc/ssl/certs/postfix.pem ssl_key_file: /etc/ssl/private/postfix.key login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_privileged_group: mail mail_location: maildir:/var/mail/%u mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 lda: auth_socket_path: /var/run/dovecot/auth-master postmaster_address: postmaster(a)holinice.com mail_plugins: sieve log_path: syslog_facility: mail auth default: mechanisms: plain login verbose: yes passdb: driver: pam userdb: driver: passwd socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 432 user: mail group: mail

2 1

[Dovecot] dovecot + virtio (9p2000.L) = errors
by epek＠gmx.net 28 May '13

28 May '13

Hi! I hope someone knows more about the issues I've encountered in: Setup: I am running dovecot 2.1.7 on Debian Wheezy in a virtual machine (kvm-style qemu-kvm: host: ubuntu 13.04/1.4.0-dfsg-1expubuntu). The mail storage is a directory on the host machine mounted via virtfs (9p2000.L) on the guest. Furthermore ISPConfig is involved in that setup, but that should not make any significant difference at that point. Problem resolved: The problem is, that similar to nfs mmap() and dotlocking seem to fail - the mmap issue could be resolved by adding: mmap_disable=yes to dovecot.conf Problem remaining: Still the following errors remain, despite dotlock_use_excl=no May 27 12:54:51 host dovecot: imap(test@mydomain): Error: fstat(/var/vmail/mydomain/test/.quotausage.lock) failed: No such file or directory May 27 12:54:51 host dovecot: imap(test@mydomain): Error: file dict commit: file_dotlock_open(/var/vmail/mydomain/test/.quotausage) failed: No such file or directory May 27 12:54:51 host dovecot: imap(test@mydomain): Error: fstat(/var/vmail/mydomain/test/Maildir/dovecot-uidlist.lock) failed: No such file or directory May 27 12:54:51 host dovecot: imap(test@mydomain): Error: fstat(/var/vmail/mydomain/test/Maildir/dovecot-uidlist.lock) failed: No such file or directory May 27 12:54:51 host dovecot: imap(test@mydomain): Error: fstat(/var/vmail/mydomain/test/Maildir/dovecot-uidlist.lock) failed: No such file or directory May 27 12:54:51 host dovecot: imap(test@mydomain): Error: fstat(/var/vmail/mydomain/test/Maildir/dovecot-uidlist.lock) failed: No such file or directory May 27 12:54:51 host dovecot: imap(test@mydomain): Error: fstat(/var/vmail/mydomain/test/Maildir/dovecot-uidlist.lock) failed: No such file or directory May 27 12:54:51 host dovecot: imap(test@mydomain): Error: fstat(/var/vmail/mydomain/test/Maildir/dovecot-uidlist.lock) failed: No such file or directory May 27 12:54:52 host dovecot: imap(test@mydomain): Error: fstat(/var/vmail/mydomain/test/Maildir/dovecot-uidlist.lock) failed: No such file or directory May 27 12:54:52 host dovecot: imap(test@mydomain): Error: file_dotlock_create(/var/vmail/mydomain/test/Maildir/dovecot-uidlist) failed: No such file or directory May 27 12:54:52 host dovecot: imap(test@mydomain): Error: fstat(/var/vmail/mydomain/test/Maildir/dovecot-uidlist.lock) failed: No such file or directory May 27 12:54:52 host dovecot: imap(test@mydomain): Error: fstat(/var/vmail/mydomain/test/Maildir/dovecot-uidlist.lock) failed: No such file or directory May 27 12:54:52 host dovecot: imap(test@mydomain): Error: file_dotlock_create(/var/vmail/mydomain/test/Maildir/dovecot-uidlist) failed: No such file or directory The "failed" files are existing on that path - permissions for the configured "vmail" user and group exist (0600). I'd be greatful for any hint on how to resolve that issue - Thanks in advance! Regards Erich

1 0

[Dovecot] put users's mailbox in read only mode
by Frank Bonnet 28 May '13

28 May '13

Hello For internal purpose I need to put some users's mailboxes and IMAP folders in read only mode during few days. We use MBOX format and UNIX real users mode ( FreeBSD 9.1 ) thanks for any info

2 1

[Dovecot] UIDLs problem on migration to dovecot
by Oscar A. Jara 27 May '13

27 May '13

Hello list, I'm about to migrate from Courier 4.6 (POP and IMAP) to Dovecot 1.2. I am currently trying to match UIDLs of both servers to avoid redownload of mails but I could not success. I've already configured dovecot POP3 to format UIDLs like this: pop3_uidl_format = UID%u-%v I also executed the script 'courier-dovecot-migrate.pl' to do the migration in a couple of test accounts but the IDs don't match for all mails and the script didn't report any errors. I have production courier pop3 server running on port 110 and the new dovecot server running on another port. Here I paste some of the missmatches in one of the test accounts: 8827 UID9060-1259354075 | 8827 UID9041-1259354075 8828 UID9061-1259354075 | 8828 UID9023-1259354075 8829 UID9062-1259354075 | 8829 UID9067-1259354075 8830 UID9063-1259354075 | 8830 UID9064-1259354075 8831 UID9064-1259354075 | 8831 UID9043-1259354075 8832 UID9065-1259354075 | 8832 UID9061-1259354075 8833 UID9066-1259354075 | 8833 UID9025-1259354075 8834 UID9067-1259354075 | 8834 UID9047-1259354075 One thing that I don't know if is important is that I am using dovecot-lda since long ago, not courier lda. I don't know what I am missing here and I would appreciate some help. Thank you. __________ Information from ESET Mail Security, version of virus signature database 8381 (20130527) __________ The message was checked by ESET Mail Security. http://www.eset.com

1 0

[Dovecot] Problem with dsync replication : mails are not deleted correctly
by Nicolas ROCHE 27 May '13

27 May '13

Hello, I would like to configure a postfix / dovecot cluster based on ssh / dsync replication. I have two linux serveurs (Oracle RHEL 5 86_64) and I install both sides dovecot (V2.2.2+), postfix (2.10.0) and mysql (Ver 14.12 Distrib 5.0.77). I configured these servers in order to make them replicate, and I created some virtual users. I use some java code in order to send mail (with SMTP) and to get mail (with POP3). When the java code get a mail, it deletes it from mailbox (the flag "DELETED" is set to true). When I send a mail on server A, I can see the mail replicated on both servers A and B : a file containing the message data exists in /home/vmail/test03/new/ in both sides. When I get the mail from server A with my java POP3 client, all is OK : the mail is deleted on both servers A and B (no more file in /home/vmail/test03/new/). The problem is when I send a mail on server A and I get it from server B : I can get the mail, but the mail is not deleted from server B, and neither from server A. When I try a second time to get the mail on server B, then all becomes OK : the mail is deleted on both server A and B. I can reproduce the problem every time. Is it a known bug or not ? If yes, is there a patch ? If no, may the problem come from my config ? Regards, Nicolas. [root@int-proxy1 dovecot-2.2.2-p1]# doveconf -n # 2.2.2: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 2.6.18-194.el5xen x86_64 Red Hat Enterprise Linux Server release 5.5 (Tikanga) ext3 disable_plaintext_auth = no hostname = int-proxy1 mail_location = maildir:/home/vmail/%u mail_plugins = acl quota notify replication mail_privileged_group = mail mbox_write_locks = fcntl namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = /usr/local/etc/dovecot/dovecot-sql.conf driver = sql } plugin { mail_replica = remote:vmail@int-proxy2 replication_full_sync_interval = 1 hours } pop3_uidl_format = %g postmaster_address = postmaster(a)mail.fluid-e.int service aggregator { fifo_listener replication-notify-fifo { mode = 0666 user = vmail } unix_listener replication-notify { mode = 0666 user = vmail } } service auth-worker { user = root } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } unix_listener auth-userdb { mode = 0666 user = vmail } user = root } service config { unix_listener config { user = vmail } } service doveadm { user = vmail } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0666 user = postfix } } service pop3-login { inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 ssl = yes } } service replicator { process_min_avail = 1 } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem submission_host = int-proxy1:25 userdb { args = /usr/local/etc/dovecot/dovecot-sql.conf driver = sql } protocol imap { mail_plugins = acl quota imap_acl imap_quota mail_log notify }

3 6

[Dovecot] Upgrading 1.2 to 2.x
by Simon B 27 May '13

27 May '13

Hi In an unscheduled maintenance window next week, I will have the opportunity to upgrade to 2.x should I wish to do and provided I can get it working on stage first. My questions: I've seen a lot on the list about the rock-solidness of 1.2 but also some people saying that some versions of 2.x better than others. Is there a recommended version - I don't need bleeding edge, I'd prefer stability, or one most of you can agree on? What am I missing by not upgrading? A few months ago I tried to convert a Dovecot 1.2 config into 2.1 and wasn't very successful. Any tips on how to go about it? Thanks. Simon

2 2

[Dovecot] mixing virtual and system users
by Julien Beauviala 27 May '13

27 May '13

Hello all, I'm setting up a small mail server for aprox 20 users, and I'm trying to keep it really simple so I went the virtual users as text file way, following this page : http://lukas-schulze.de/2012/02/setup-postfix-and-dovecot-on-debian-squeeze… It seemed to work fine except for the 'system' users, and I am stumped by this. Basically the config does not 'see' /etc/aliases, so mail to root or mailman are 'Recipient address rejected: User unknown'. I've added the backup pam as explained by the following page* and tried many permutations in /etc/postfix/main.cf but still not good, systems users are rejected. Obviously something is amiss. * http://wiki2.dovecot.org/Authentication/MultipleDatabases If someone could point me in the right direction, that would be great. The system is debian 6, details of the configuration below. dovecot -n : ------------ # 1.2.15: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.7 ext3 log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s ssl_cert_file: /etc/ssl/certs/postfix.pem ssl_key_file: /etc/ssl/private/postfix.key login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login first_valid_uid: 5000 last_valid_uid: 5000 first_valid_gid: 5000 last_valid_gid: 5000 mail_privileged_group: vmail mail_location: maildir:/var/vmail/%d/%n/Maildir mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 lda: auth_socket_path: /var/run/dovecot/auth-master postmaster_address: postmaster(a)example.net mail_plugins: sieve log_path: auth default: mechanisms: plain login verbose: yes passdb: driver: pam passdb: driver: passwd-file args: scheme=CRAM-MD5 /etc/dovecot/users.conf userdb: driver: static args: uid=5000 gid=5000 home=/var/vmail/%d/%n allow_all_users=yes userdb: driver: passwd socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: vmail postconf -n : ------------- alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix debug_peer_level = 2 inet_interfaces = all mailbox_size_limit = 0 mydestination = localhost mydomain = example.net myhostname = osiris.example.net mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = $mydomain queue_directory = /var/spool/postfix recipient_delimiter = + relayhost = show_user_unknown_table_name = no smtp_tls_CAfile = /etc/ssl/certs/ca-certificates.crt smtp_tls_note_starttls_offer = yes smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name smtpd_helo_required = yes smtpd_helo_restrictions = reject_invalid_helo_hostname smtpd_recipient_restrictions = reject_unknown_recipient_domain, reject_unauth_pipelining, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous smtpd_sasl_tls_security_options = $smtpd_sasl_security_options smtpd_sasl_type = dovecot smtpd_tls_CAfile = /etc/ssl/certs/ca-certificates.crt smtpd_tls_cert_file = /etc/ssl/certs/postfix.pem smtpd_tls_key_file = /etc/ssl/private/postfix.key smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_tls_session_cache_timeout = 3600s smtpd_use_tls = yes tls_random_source = dev:/dev/urandom virtual_alias_maps = hash:/etc/postfix/virtual_alias_maps virtual_gid_maps = static:5000 virtual_mailbox_base = /var/vmail virtual_mailbox_domains = hash:/etc/postfix/virtual_mailbox_domains virtual_mailbox_maps = hash:/etc/postfix/virtual_mailbox_maps virtual_minimum_uid = 100 virtual_transport = dovecot virtual_uid_maps = static:5000 /etc/postfix/virtual_mailbox_domains : -------------------------------------- @example.net OK @osiris.example.net OK /etc/postfix/virtual_mailbox_maps : ----------------------------------- elisabethp(a)example.net example.net/elisabethp /etc/postfix/virtual_alias_maps : --------------------------------- elisabeth(a)example.net elisabethp(a)example.net j.

2 1

[Dovecot] NFS mount permissions
by Patrick Westenberg 26 May '13

26 May '13

Hi everyone, I would like to move my mails from ocfs2 to an NFS share. As the mountpoint and all folders and files belong to nobody/nogroup, dovecot is only able to access the mails if I give full access to "others". I don't like that. How do you NFS-using guys solve this problem? Regards Patrick

3 4

[Dovecot] Problems with Apple Mail: Enter Password for Account "..."
by Frank Röhm 26 May '13

26 May '13

Hello I have on Ubuntu 12.04 a postfix 2.9.3-2 mailserver with dovecot 2.0.19 I get email from my pc (thunderbird), my smartphone (k9mail) and my MacBook (Apple Mail 4.6 - 1085 on Mac OS 10.6.8) all with IMAP and SSL. All is working normally but sometimes I get an error message from my MacBook, which is irritating. It says this (more or less): "Enter Password for Account "..." The IMAP-Server "..." rejected the password for user "..." Enter your password again or cancel. ... o Remember this password in my keychain" The password was NOT wrong, but anyway, if reenter it, Apple Mail won't accept it, the message will come again and again. I guess that dovecot blocks apple mail maybe because the other two clients try to login at the same time? Is there any setting where I could adjust this blocking (if it is blocking) in dovecot? Only if this really is the reason. The issue is coming not regularily but when it comes, often for half an hour I cannot check mails for this account (other accounts on apple mail won't be touched). If I restart Apple Mail, the problem could be fixed, but maybe not. In the logfiles of Dovecot I don't find anything about this. Thank you and kind regards frank

4 4

Re: [Dovecot] Dovecot mysql replication
by Alex Crow 26 May '13

26 May '13

Hi, Balls, the silly script (written in largely incomprehensible perl by a predecessor of mine) is supposed to catch mailing lists, and HR won't let us have it auto-terminate or update... :-( Thanks for giving me an another few hours work :-) Alex On 24/05/13 08:54, Edwardo Garcia wrote: > Alex, you on long vacation? > > Hi, I am on leave, returning on Thursday 9th May If your query is > urgent, please raise contact the team onitdept(a)integrafin.co.uk > <mailto:itdept@integrafin.co.uk>. Regards Alex > > > On Fri, May 24, 2013 at 5:48 PM, Alex Crow <acrow(a)integrafin.co.uk > <mailto:acrow@integrafin.co.uk>> wrote: > > On 24/05/13 08:45, Edwardo Garcia wrote: > > Halo, > > (First time posting, please forgive English is not native) > > Change from Courier to Dovecot 2.1.16 > > Having two server. > > Having mysql on thiz two server, one master, one slave. > > What we wish is slave Dovecot only ask slave mysql, unless > slave mysql not > work when then ask master, we have Postfix do thiz fallover > good, but > Dovecot talk to slave and master no mater what, we think thiz > defeat > fallover as we not want this aktion, but aktion like Postfix. > > The problemo is can not find Dovecot option for thiz in > wiki2.dovecot.org <http://wiki2.dovecot.org>, > is possible? > > > You could set up MySQL in Dual Master mode instead.... > > Alex > > > > -- > This message has been scanned for viruses and > dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is > believed to be clean.

1 0

[Dovecot] dovecot-sieve (pigeonhole) -- is is possible to "re-filter" INBOX when filters have been updated?
by Lev Serebryakov 25 May '13

25 May '13

Hello, Dovecot. I want to migrate to webmail (roundcube) over dovecot + sieve (pigeonhole). Now I'm using on-client (The Bat!) filters, but I need to have acccess to my mail everywhere, not only on my workstation. And I wonder, is here simple way to re-filter INBOX after sieve filters have been changed? Any offline (desktop) mail client could run new filters on old messages -- is here any way to do this with dovecot-sieve (pigeonhole)? I'm using postfix + dovecot LMTP to run sieve filters. -- // Black Lion AKA Lev Serebryakov <lev(a)serebryakov.spb.ru>

2 4

[Dovecot] Virtual Servers, or different authentication setups.
by Joshua Gardner 25 May '13

25 May '13

I want to know if there is any virtual server functionality in Dovecot? I would like to have two separate configurations, that access the same email, running in the same Dovecot instance. They would bind different ports and/or IPs, but have different authentication settings. In particular, one would use a PLAIN password scheme, the other SSHA. How would I go about setting up these virtual servers? Or, would I have to run separate instances of Dovecot? If I do have to run separate instances, how do I keep them from interfering with eachother? -Josh

2 1

[Dovecot] Passwordless auth?
by Dan Mahoney, System Admin 25 May '13

25 May '13

Hey all, I'm in the process of writing some scripts which I want to be able to take actions on my local mailbox. (For example, to move a subset of messages to the trash over time, if unread for a week. To act on messages in my learn-spam folder and then delete them). What occured to me as being a Neat Idea is if Dovecot could honor ident (rfc1413) lookups, from trusted hosts (i.e. 127.0.0.1). In this way I get all the benefits of dovecot's indexing being updated and nice locking, but I don't have to leave my password laying around in a plaintext file. (Yes, this assumes I'm running a shell on the mail server. I'm not concerned about the same level of security when you could simply cat my mail spool). I'd definitely consider something like an SSH key with a forced command (I do see questions in the FAQ about making dovecot work over a socket connection), but that forgoes using standard imap clients. I could also create a dovecot-only user with my UID and no other login privileges, but I'd like this to "just work" for anyone. I don't know anything about if dovecot supports X509 auth, but this would require the client libraries to support such a thing, which not all do. I'd love to hear about any other ways people have thought about to do this. Any ideas? -Dan Mahoney -- --------Dan Mahoney-------- Techie, Sysadmin, WebGeek Gushi on efnet/undernet IRC ICQ: 13735144 AIM: LarpGM Site: http://www.gushi.org ---------------------------

7 9

[Dovecot] userdb section order seems important in config file
by Ken A 24 May '13

24 May '13

Hi Timo, et al, I'm using Dovecot 2.2.2, with dict file based quota and a quota_rule in dovecot.conf. I have userdb configured like so: userdb { driver = passwd-file args = /etc/dovecot/passwd-file } userdb { driver = passwd } I get the behavior I want with a single line in the passwd-file for any users that I'd like to override the default quota. BUT, if I list the userdb sections in the reverse order, with the driver=passwd first, then the quotas in passwd-file are ignored. I have a feeling I am counting on undocumented behavior that might change in the future. Or is this okay to depend on? Thanks, Ken -- Ken Anderson Pacific Internet - http://www.pacific.net

1 1

[Dovecot] Store Mails into SQL DB
by Leander S. 24 May '13

24 May '13

Hi, is there an option to store eMails into DB right away instead of storing them as files on the HDD?

3 2