- dovecot - dovecot.org

Processing incoming mail efficiently
by Ron Garret 30 Jan '21

30 Jan '21

I’ve asked a related question on this list before but I now have a much better handle on what I’m doing and I realize that I still don’t know the answer, so I’m going to ask this again in a slightly different form. I’m writing a spam filter, so obviously I need to feed incoming mail to it somehow. The “obvious” way to do this is with a sieve script using the pipe extension. There are two problems with this: 1. This will always pipe the entire file no matter how big it is. The filter will often not need to process the body of the message, only the headers, or only the first part of a multipart MIME message. Is there any way to allow my filter to open the file in which the message is stored rather than piping it a copy of the message? 2. Once the filter has processed the message and decided if it’s spam it still needs to move the message to the appropriate folder (INBOX or Junk). To do this it needs to somehow correlate the *content* of the message that was piped to it with the UID of the message that needs to be moved. One way to do this is to pull out the message-id header and then use doveadm to find the file containing the message with that message-id, but there are two problems with this. First, not all messages have message-ids. I can work around this by adding my own message-id to messages that don’t already have them, but this just feel wrong. And second, unless dovecot keeps an index of message-ids (does it?) then this will be horribly inefficient because it will have to essentially grep for the message id every time I want to move a message. So it seems like there has to be a better way, but I can’t think of what that would be. I figure this has to be a solved problem because I am obviously not the first person to write a spam filter for dovecot. What is the Right Way to do this? Thanks, rg

3 6

What is the right way to move messages between mailboxes?
by Ron Garret 30 Jan '21

30 Jan '21

I’m working on a spam filter. Incoming messages are sent to an “incoming” folder (via a sieve script) where they are processed by the filter and moved either to INBOX or Junk. My question is: what is the right way to effect this move? Can I just mv the file? With Dovecot automatically notice this and update any connected IMAP clients? Or is there some other procedure and/or utility (doveadm?) that I should be using for this? Thanks, rg

1 0

dovecot and broken uidlist
by Maciej Milaszewski 29 Jan '21

29 Jan '21

Hi I have been trying resolve my problem with dovecot for a few days and I dont have idea.... My environment is: dovecot director+5 dovecot guest dovecot-2.2.36.4 from source Linux 3.16.0-11-amd64 storage via nfs (NetApp) all works fine but when I update OS from debian 8 (kernel 3.16.x) to debian 9 (kernel 4.9.x ) sometimes I get random in logs: Broken dovecot-uidlist examle: Error: Broken file /vmail2/po/pollygraf.xxx_pg_pollygraf/Maildir/dovecot-uidlist line 88: Invalid data: (for random users - sometimes 10 error in day per node, some times more) File looks ok But if I change kernel to 3.16.x problem with "Broken file dovecot-uidlist" - not exists if turn to 4.9 or 5.x - problem exists I have storage via nfs with opions: rw,sec=sys,noexec,noatime,tcp,hard,rsize=65536,wsize=65536,intr,nordirplus,nfsvers=3,tcp,actimeo=120 I tested with "nocto" or without "nocto" - nothing changes ...... nfs options in node: mmap_disable = yes mail_fsync = always I bet the configuration is correct and I wonder why the problem occurs with other kernels 3.x.x - ok 4.x - not ok I check and user who have problem did not connect to another node in this time I dont have idea why problem exists on the kernel 4.x but not in 3.x

6 14

Long Term Archival
by Rupert Gallagher 29 Jan '21

29 Jan '21

Hello, I would like to know what is your strategy for legally compliant long term archival of e-mails (up to 10 years). Thank you

3 2

10G mails use 90G on disk
by Markus Schönhaber 29 Jan '21

29 Jan '21

Hello, on a system I administer the disk where Dovecot's mailstore (mdbox) resides got filled up to the brim although the combined quotas for the users are much smaller than the disk's capacity. For one user I see the following: doveadm quota get -u <USER>@<DOMAIN> Username Quota name Type Value Limit % <USER>@<DOMAIN> User quota STORAGE 10231248 20971520 48 <USER>@<DOMAIN> User quota MESSAGE 11176 - 0 So this user has used ~10G of his 20G quota. But looking at the space used on disk: # du -hs /var/spool/vmail/mail/<DOMAIN>/<USER>/storage/ 90G /var/spool/vmail/mail/<DOMAIN>/<USER>/storage/ What might be the reason that mail size and disk space used differ so much? And most of all: how can I prevent that from happening? Regards mks # doveconf -n # 2.3.13 (89f716dc2): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.13 (cdd19fe3) # OS: Linux 4.19.0-13-amd64 x86_64 Debian 10.7 ext4 # Hostname: … auth_mechanisms = plain login dict { quota = pgsql:/etc/dovecot/dovecot-dict-sql.conf.ext } imap_id_log = * login_log_format_elements = user=<%u> method=%m rip=%r lip=%l lport=%a mpid=%e %c mail_home = /var/spool/vmail/home/%d/%n mail_location = mdbox:/var/spool/vmail/mail/%d/%n mail_plugins = " quota acl" managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Entwürfe { special_use = \Drafts } mailbox Entw&APw-rfe { special_use = \Drafts } mailbox "Gelöschte Objekte" { special_use = \Trash } mailbox "Gel&APY-schte Objekte" { special_use = \Trash } mailbox "Gesendete Objekte" { special_use = \Sent } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = separator = / } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { acl = vfile mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size quota = dict:User quota::proxy::quota recipient_delimiter = + sieve = file:~/sieve;active=~/.dovecot.sieve sieve_redirect_envelope_from = orig_recipient } protocols = " imap lmtp sieve" service auth-worker { user = $default_internal_user } service auth { inet_listener { port = 12345 } unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } } service dict { unix_listener dict { group = vmail mode = 0600 user = vmail } } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0600 user = postfix } } service stats { client_limit = 10000 unix_listener stats-writer { group = vmail user = vmail } } ssl_cert = </etc/letsencrypt/live/<DOMAIN>/fullchain.pem ssl_dh = # hidden, use -P to show it ssl_key = # hidden, use -P to show it userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } verbose_proctitle = yes protocol lmtp { mail_plugins = " quota acl quota sieve" } protocol lda { mail_plugins = " quota acl sieve" } protocol imap { mail_plugins = " quota acl imap_quota acl" } remote 192.168.1.0/24 { protocol imap { disable_plaintext_auth = no } }

2 4

mail event
by Marc Roos 29 Jan '21

29 Jan '21

> > Using mail_log plugin is always very recommended, > > https://doc.dovecot.org/configuration_manual/plugins/mail_event_logging/ > I am not sure if I am correct, but I think this logs every deleted message not? I was testing with this a while ago. Is there also an option that only logs something like '300 messages deleted'?

1 0

SMTP tool for Email validation
by Amol Kale 29 Jan '21

29 Jan '21

Hi, We are looking for a tool for bulk SMTP testing / Email validation using telnet or similar protocol ( which doesn't send the mails ) It generally involves steps like NSlookup to check MX of destination server, opening port25, telnet to communicate with client server, then finally checking the correctness of user email account. Please connect if you have such ready tool with you or you can develop Process example- <https://blog.mailtrap.io/verify-email-address-without-sending/> https://blog.mailtrap.io/verify-email-address-without-sending/ Thanks & regards Amol Kale Founder Director Talent Trackers HR 7350002596

4 3

Enabling auth_cache_verify_password_with_worker disables proxy mode
by Malte Schmidt 29 Jan '21

29 Jan '21

Setting "auth_cache_verify_password_with_worker = yes" in order to leverage multiple cores for the Dovecot authentication-process causes Dovecot not to proxy anymore. With debug-logging I figured: auth_cache_verify_password_with_worker = no passdb out: OK 1 user=username host=bla port=10993 ssl=any-cert mail_crypt_global_public_key=key mail_crypt_global_private_key=otherkey hostip=123.123.123.123 proxy pass=pw auth_cache_verify_password_with_worker = yes passdb out: OK 1 user=username The rest seems missing. Dovecot version: v2.3.11.3 Searching for this issue, I found at least two posts mentioning the same symptoms: https://dovecot.org/pipermail/dovecot/2018-April/111583.html https://dovecot.org/pipermail/dovecot/2020-April/118564.html https://listen.jpberlin.de/pipermail/dovecot/2020-April/001915.html (same as the english one from april 2020)

2 1

Infinity loop when run "doveadm quota get -A" from Dovecot Director with 500 users
by Duc Anh Do 29 Jan '21

29 Jan '21

Hi all, I have one Dovecot Director, two Dovecot Backends and one LDAP server with about 500 users. I would like to run *doveadm quota get -A* from the Director. In each Backend, there is no problem when run the command: # doveadm quota get -A user1 User quota STORAGE 0 1048576000000000 0 user1 User quota MESSAGE 0 - 0 … user500 User quota STORAGE 0 1048576000000000 0 user500 User quota MESSAGE 0 - 0 However, when I run from the Director, the command might stuck in an infinity loop (I have to terminate to quit): # doveadm quota get -A user1 User quota STORAGE 0 1048576000000000 0 user1 User quota MESSAGE 0 - 0 … user49 User quota STORAGE 0 1048576000000000 0 user49 User quota MESSAGE 0 - 0 user66 User quota STORAGE 0 1048576000000000 0 user66 User quota MESSAGE 0 - 0 ^Cdoveadm(user86): Error: doveadm server failure doveadm: Error: Failed to iterate through some users doveadm: Error: backend2.local:24245: Command quota get failed for user53: EOF doveadm: Error: backend1.local:24245: Command quota get failed for user66: EOF doveadm: Error: Aborted This problem occurs in both Dovecot 2.2.36 and Dovecot 2.3.11, 2.3.13 (I build Dovecot from source). It's ok for me to get quota of one user from the Director: # doveadm quota get -u user1 Quota name Type Value Limit % User quota STORAGE 0 1048576000000000 0 User quota MESSAGE 0 - 0 And if there's only one Backend, *doveadm quota get -A* from the Director works well too. After investigating, I found the infinity loop: File src/doveadm/doveadm-mail-server.c: static void doveadm_server_flush_one(struct doveadm_server *server) { unsigned int count = array_count(&server->queue); do { io_loop_run(current_ioloop); } while (array_count(&server->queue) == count && doveadm_server_have_used_connections(server) && !DOVEADM_MAIL_SERVER_FAILED()); } In case there're many Backends, I see only global variable *current_ioloop* is used to notify in the callback function. Might this be a race condition? I understand there's a workaround to do my work: - Run *doveadm user '*'* to get all users - Loop through all users and run *doveadm quota get -u xxx* Thanks, Anh Do

2 2

Dovecot Mail Server - Cloud Compatibility
by Kristie Buller 28 Jan '21

28 Jan '21

4 3

2.13 read, i_stream_read_memarea: assertion failed: (!stream->blocking)
by Stuart Henderson 28 Jan '21

28 Jan '21

I'm seeing this on some mailboxes with 2.13 on OpenBSD amd64 (recent snapshot): dovecot: imap(sthen)<47220><ARy1oKS5lWDDX7sa>: Panic: file istream.c: line 332 (i_stream_read_memarea): assertion failed: (!stream->blocking) Using sieve, imapsieve, replicator, zlib (zlib_save = lz4 and has been for some time, so the relevant messages probably use this). Using mmap_disable because OpenBSD. Any suggestions how to handle it, preferably automatically? (even if a message is corrupt/lost it would be really nice if a standard client could still access the mailbox rather than kill the imap process while reading headers). bt first for ease of reading, followed by bt full in case it has any additional clues. (gdb) bt #0 thrkill () at /tmp/-:3 #1 0x00000e9158c7c3ae in _libc_abort () at /usr/src/lib/libc/stdlib/abort.c:51 #2 0x00000e91adc00c26 in default_fatal_finish (type=LOG_TYPE_PANIC, status=0) at failures.c:459 #3 0x00000e91adbff034 in fatal_handler_real (ctx=0x7f7ffffcdd90, format=<optimized out>, args=<optimized out>) at failures.c:471 #4 0x00000e91adbfffb1 in i_internal_fatal_handler (ctx=0x0, format=0x6 <error: Cannot access memory at address 0x6>, args=0x0) at failures.c:866 #5 0x00000e91adbff266 in i_panic (format=0x6 <error: Cannot access memory at address 0x6>) at failures.c:523 #6 0x00000e91adc0f15c in i_stream_read_memarea (stream=0xe917ead3480) at istream.c:332 #7 0x00000e91adc1925f in read_more (sstream=0xe91431c4800) at istream-seekable.c:149 #8 0x00000e91adc19090 in read_from_buffer (sstream=0xe91431c4800, ret_r=0x7f7ffffcded8) at istream-seekable.c:204 #9 0x00000e91adc1856d in i_stream_seekable_read (stream=0xe91431c4800) at istream-seekable.c:265 #10 0x00000e91adc0f0a4 in i_stream_read_memarea (stream=0xe91431c4880) at istream.c:313 #11 0x00000e91adc16bbc in i_stream_limit_read (stream=0xe91e9ccca00) at istream-limit.c:49 #12 0x00000e91adc0f0a4 in i_stream_read_memarea (stream=0xe91e9ccca80) at istream.c:313 #13 0x00000e91adc0f79c in i_stream_read_copy_from_parent (istream=<optimized out>) at istream.c:387 #14 0x00000e918e9729fa in i_stream_mail_read (stream=0xe91e9ccc000) at istream-mail.c:115 #15 0x00000e91adc0f0a4 in i_stream_read_memarea (stream=0xe91e9ccc080) at istream.c:313 #16 0x00000e91adc104f5 in i_stream_read (stream=0xe91e9ccc080) at istream.c:271 #17 i_stream_read_data (stream=0xe91e9ccc080, data_r=0x7f7ffffce110, size_r=0x7f7ffffce100, threshold=1) at istream.c:747 #18 0x00000e91adbd6a18 in i_stream_read_bytes (stream=0x0, data_r=<optimized out>, size_r=<optimized out>, wanted=<optimized out>) at ../../src/lib/istream.h:214 #19 message_parse_header_next (ctx=0xe9183e1b180, hdr_r=0x7f7ffffce1d0) at message-header-parser.c:85 #20 0x00000e91adbceef2 in read_header (mstream=0xe91e9cc6000) at istream-header-filter.c:195 #21 i_stream_header_filter_read (stream=0xe91e9cc6000) at istream-header-filter.c:450 #22 0x00000e91adc0f0a4 in i_stream_read_memarea (stream=0xe91e9cc6080) at istream.c:313 #23 0x00000e91adc104f5 in i_stream_read (stream=0xe91e9cc6080) at istream.c:271 #24 i_stream_read_data (stream=0xe91e9cc6080, data_r=0x7f7ffffce2c0, size_r=0x7f7ffffce2c8, threshold=0) at istream.c:747 #25 0x00000e91adbdc07b in i_stream_read_bytes (stream=0xe91e9cc6080, data_r=<optimized out>, size_r=<optimized out>, wanted=<error reading variable: Cannot access memory at address 0x1>) at ../../src/lib/istream.h:214 #26 message_get_header_size (input=0xe91e9cc6080, hdr=0x7f7ffffce328, has_nuls_r=0x7f7ffffce3b7) at message-size.c:19 #27 0x00000e8f25e767d9 in imap_msgpart_get_partial_header (mail=0xe91e9cc4848, mail_input=<optimized out>, msgpart=0xe91c92a2048, virtual_size_r=<optimized out>, result_r=0x7f7ffffce408, have_crlfs_r=<optimized out>) at imap-msgpart.c:401 #28 imap_msgpart_open_normal (mail=<optimized out>, msgpart=0xe91c92a2048, part=<optimized out>, virtual_size_r=<optimized out>, result_r=0x7f7ffffce408, have_crlfs_r=<optimized out>) at imap-msgpart.c:637 #29 imap_msgpart_open (mail=<optimized out>, msgpart=0xe91c92a2048, result_r=0x7f7ffffce408) at imap-msgpart.c:706 #30 0x00000e8f25e672ff in fetch_body_msgpart (ctx=0xe9159845368, mail=<optimized out>, body=0xe91e9cb4398) at imap-fetch-body.c:184 #31 0x00000e8f25e65837 in imap_fetch_more_int (ctx=0xe9159845368, cancel=false) at imap-fetch.c:562 #32 0x00000e8f25e6552c in imap_fetch_more (ctx=0xe9159845368, cmd=0xe9159845048) at imap-fetch.c:617 #33 0x00000e8f25e55521 in cmd_fetch (cmd=0xe9159845048) at cmd-fetch.c:337 #34 0x00000e8f25e62d12 in command_exec (cmd=0xe9159845048) at imap-commands.c:201 #35 0x00000e8f25e61576 in client_command_input (cmd=0xe9159845048) at imap-client.c:1204 #36 0x00000e8f25e61682 in client_command_input (cmd=0xe9159845048) at imap-client.c:1269 #37 0x00000e8f25e5ffb4 in client_handle_next_command (client=0xe9159845848, remove_io_r=<optimized out>) at imap-client.c:1313 #38 client_handle_input (client=0xe9159845848) at imap-client.c:1327 #39 0x00000e8f25e5e755 in client_input (client=0xe9159845848) at imap-client.c:1371 #40 0x00000e91adc1c851 in io_loop_call_io (io=0xe91eb5d0b00) at ioloop.c:714 #41 0x00000e91adc1f84c in io_loop_handler_run_internal (ioloop=0xe9162373d00) at ioloop-kqueue.c:164 #42 0x00000e91adc1cfd9 in io_loop_handler_run (ioloop=0xe9162373d00) at ioloop.c:766 #43 0x00000e91adc1cce8 in io_loop_run (ioloop=0xe9162373d00) at ioloop.c:739 #44 0x00000e91adb77655 in master_service_run (service=0xe9193c39600, callback=0x6) at master-service.c:853 #45 0x00000e8f25e70dd1 in main (argc=1, argv=<optimized out>) at main.c:532 (gdb) bt full #0 thrkill () at /tmp/-:3 No locals. #1 0x00000e9158c7c3ae in _libc_abort () at /usr/src/lib/libc/stdlib/abort.c:51 sa = { __sigaction_u = { __sa_handler = 0x0, __sa_sigaction = 0x0 }, sa_mask = 4294967295, sa_flags = 0 } mask = 4294967263 #2 0x00000e91adc00c26 in default_fatal_finish (type=LOG_TYPE_PANIC, status=0) at failures.c:459 recursed = 0 backtrace = <optimized out> #3 0x00000e91adbff034 in fatal_handler_real (ctx=0x7f7ffffcdd90, format=<optimized out>, args=<optimized out>) at failures.c:471 status = 6 #4 0x00000e91adbfffb1 in i_internal_fatal_handler (ctx=0x0, format=0x6 <error: Cannot access memory at address 0x6>, args=0x0) at failures.c:866 No locals. #5 0x00000e91adbff266 in i_panic (format=0x6 <error: Cannot access memory at address 0x6>) at failures.c:523 ctx = { type = LOG_TYPE_PANIC, exit_status = 0, timestamp = 0x0, timestamp_usecs = 0, log_prefix = 0x0, log_prefix_type_pos = 0 } args = {{ gp_offset = 40, fp_offset = 48, overflow_arg_area = 0x7f7ffffcddf0, reg_save_area = 0x7f7ffffcdce0 }} #6 0x00000e91adc0f15c in i_stream_read_memarea (stream=0xe917ead3480) at istream.c:332 _stream = 0xe917ead3400 old_size = 0 ret = 0 #7 0x00000e91adc1925f in read_more (sstream=0xe91431c4800) at istream-seekable.c:149 ret = <optimized out> size = <optimized out> #8 0x00000e91adc19090 in read_from_buffer (sstream=0xe91431c4800, ret_r=0x7f7ffffcded8) at istream-seekable.c:204 old_skip = <optimized out> stream = 0xe91431c4800 size = <optimized out> data = <optimized out> avail_size = <optimized out> #9 0x00000e91adc1856d in i_stream_seekable_read (stream=0xe91431c4800) at istream-seekable.c:265 sstream = 0xe91431c4800 ret = 16019855444480 size = <optimized out> data = <optimized out> pos = <optimized out> #10 0x00000e91adc0f0a4 in i_stream_read_memarea (stream=0xe91431c4880) at istream.c:313 _stream = 0xe91431c4800 old_size = 0 ret = <optimized out> #11 0x00000e91adc16bbc in i_stream_limit_read (stream=0xe91e9ccca00) at istream-limit.c:49 lstream = 0xe91e9ccca00 pos = 16017421909770 ret = <optimized out> left = <optimized out> #12 0x00000e91adc0f0a4 in i_stream_read_memarea (stream=0xe91e9ccca80) at istream.c:313 _stream = 0xe91e9ccca00 old_size = 0 ret = <optimized out> #13 0x00000e91adc0f79c in i_stream_read_copy_from_parent (istream=<optimized out>) at istream.c:387 stream = 0xe91e9ccc000 pos = <optimized out> ret = <optimized out> #14 0x00000e918e9729fa in i_stream_mail_read (stream=0xe91e9ccc000) at istream-mail.c:115 mstream = 0xe91e9ccc000 ret = <optimized out> size = <optimized out> #15 0x00000e91adc0f0a4 in i_stream_read_memarea (stream=0xe91e9ccc080) at istream.c:313 _stream = 0xe91e9ccc000 old_size = 0 ret = <optimized out> #16 0x00000e91adc104f5 in i_stream_read (stream=0xe91e9ccc080) at istream.c:271 _stream = 0xe91e9ccc000 ret = <optimized out> #17 i_stream_read_data (stream=0xe91e9ccc080, data_r=0x7f7ffffce110, size_r=0x7f7ffffce100, threshold=1) at istream.c:747 read_more = false ret = <error reading variable ret (Cannot access memory at address 0x0)> #18 0x00000e91adbd6a18 in i_stream_read_bytes (stream=0x0, data_r=<optimized out>, size_r=<optimized out>, wanted=<optimized out>) at ../../src/lib/istream.h:214 No locals. #19 message_parse_header_next (ctx=0xe9183e1b180, hdr_r=0x7f7ffffce1d0) at message-header-parser.c:85 skip = <error reading variable skip (Cannot access memory at address 0x0)> line = 0xe9183e1b180 colon_pos = 4294967295 no_newline = <error reading variable no_newline (Cannot access memory at address 0x0)> crlf_newline = <error reading variable crlf_newline (Cannot access memory at address 0x0)> continued = false size = 0 msg = 0xe91adafee50 <uchar_nul> "" startpos = 0 continues = <error reading variable continues (Cannot access memory at address 0x0)> i = <optimized out> parse_size = <optimized out> ret = <optimized out> last_crlf = <optimized out> last_no_newline = <optimized out> #20 0x00000e91adbceef2 in read_header (mstream=0xe91e9cc6000) at istream-header-filter.c:195 highwater_offset = <optimized out> max_buffer_size = 8192 hdr = 0x0 hdr_ret = <optimized out> ret = <optimized out> ret2 = <optimized out> #21 i_stream_header_filter_read (stream=0xe91e9cc6000) at istream-header-filter.c:450 mstream = 0xe91e9cc6000 v_offset = <optimized out> ret = <optimized out> #22 0x00000e91adc0f0a4 in i_stream_read_memarea (stream=0xe91e9cc6080) at istream.c:313 _stream = 0xe91e9cc6000 old_size = 0 ret = <optimized out> #23 0x00000e91adc104f5 in i_stream_read (stream=0xe91e9cc6080) at istream.c:271 _stream = 0xe91e9cc6000 ret = <optimized out> #24 i_stream_read_data (stream=0xe91e9cc6080, data_r=0x7f7ffffce2c0, size_r=0x7f7ffffce2c8, threshold=0) at istream.c:747 read_more = false ret = <error reading variable ret (Cannot access memory at address 0x0)> #25 0x00000e91adbdc07b in i_stream_read_bytes (stream=0xe91e9cc6080, data_r=<optimized out>, size_r=<optimized out>, wanted=<error reading variable: Cannot access memory at address 0x1>) at ../../src/lib/istream.h:214 No locals. #26 message_get_header_size (input=0xe91e9cc6080, hdr=0x7f7ffffce328, has_nuls_r=0x7f7ffffce3b7) at message-size.c:19 size = 0 msg = 0xe91adafee50 <uchar_nul> "" startpos = <error reading variable startpos (Cannot access memory at address 0x0)> missing_cr_count = <error reading variable missing_cr_count (Cannot access memory at address 0x0)> ret = <optimized out> i = <optimized out> #27 0x00000e8f25e767d9 in imap_msgpart_get_partial_header (mail=0xe91e9cc4848, mail_input=<optimized out>, msgpart=0xe91c92a2048, virtual_size_r=<optimized out>, result_r=0x7f7ffffce408, have_crlfs_r=<optimized out>) at imap-msgpart.c:401 hdr_size = { physical_size = 0, virtual_size = 0, lines = 0 } hdr_fields = 0xe91c92a21f8 hdr_count = <optimized out> input = 0xe91e9cc6080 has_nuls = false #28 imap_msgpart_open_normal (mail=<optimized out>, msgpart=0xe91c92a2048, part=<optimized out>, virtual_size_r=<optimized out>, result_r=0x7f7ffffce408, have_crlfs_r=<optimized out>) at imap-msgpart.c:637 hdr_size = { physical_size = 0, virtual_size = 0, lines = 0 } body_size = { physical_size = 0, virtual_size = 0, lines = 0 } input = <optimized out> unknown_crlfs = <error reading variable unknown_crlfs (Cannot access memory at address 0x0)> part_size = <error reading variable part_size (Cannot access memory at address 0x0)> #29 imap_msgpart_open (mail=<optimized out>, msgpart=0xe91c92a2048, result_r=0x7f7ffffce408) at imap-msgpart.c:706 part = <optimized out> ret = <optimized out> virtual_size = 1 binary = <optimized out> have_crlfs = <optimized out> #30 0x00000e8f25e672ff in fetch_body_msgpart (ctx=0xe9159845368, mail=<optimized out>, body=0xe91e9cb4398) at imap-fetch-body.c:184 result = { input = 0x0, size = 0, size_field = (unknown: 0), binary_decoded_input_has_nuls = false } str = <optimized out> #31 0x00000e8f25e65837 in imap_fetch_more_int (ctx=0xe9159845368, cancel=false) at imap-fetch.c:562 _data_stack_cur_id = <optimized out> client = <optimized out> ret = <optimized out> handlers = 0xe91e9cb4020 count = 5 #32 0x00000e8f25e6552c in imap_fetch_more (ctx=0xe9159845368, cmd=0xe9159845048) at imap-fetch.c:617 ret = <optimized out> #33 0x00000e8f25e55521 in cmd_fetch (cmd=0xe9159845048) at cmd-fetch.c:337 qresync_args = { qresync_sample_seqset = 0xe9159845368, qresync_sample_uidset = 0xe9159845020 } args = <optimized out> send_vanished = <optimized out> client = 0xe9159845848 messageset = <optimized out> search_args = 0x0 ret = <optimized out> ctx = 0x0 next_arg = <optimized out> list_arg = <optimized out> #34 0x00000e8f25e62d12 in command_exec (cmd=0xe9159845048) at imap-commands.c:201 hook = <optimized out> #35 0x00000e8f25e61576 in client_command_input (cmd=0xe9159845048) at imap-client.c:1204 client = 0xe9159845848 command = <optimized out> tag = <optimized out> ret = <optimized out> name = <optimized out> #36 0x00000e8f25e61682 in client_command_input (cmd=0xe9159845048) at imap-client.c:1269 client = 0xe9159845848 command = <optimized out> tag = <optimized out> ret = <optimized out> name = <optimized out> #37 0x00000e8f25e5ffb4 in client_handle_next_command (client=0xe9159845848, remove_io_r=<optimized out>) at imap-client.c:1313 No locals. #38 client_handle_input (client=0xe9159845848) at imap-client.c:1327 _data_stack_cur_id = <optimized out> handled_commands = false ret = <optimized out> remove_io = <optimized out> #39 0x00000e8f25e5e755 in client_input (client=0xe9159845848) at imap-client.c:1371 output = 0xe92088000a0 bytes = 218 cmd = <optimized out> #40 0x00000e91adc1c851 in io_loop_call_io (io=0xe91eb5d0b00) at ioloop.c:714 ioloop = 0xe9162373d00 t_id = 0 #41 0x00000e91adc1f84c in io_loop_handler_run_internal (ioloop=0xe9162373d00) at ioloop-kqueue.c:164 tv = { tv_sec = 3, tv_usec = 410626 } ts = { tv_sec = 3, tv_nsec = 410626000 } ctx = 0xe9171193980 msecs = <optimized out> events_count = <optimized out> events = <optimized out> ret = <optimized out> i = <optimized out> io = 0xe91eb5d0b00 #42 0x00000e91adc1cfd9 in io_loop_handler_run (ioloop=0xe9162373d00) at ioloop.c:766 No locals. #43 0x00000e91adc1cce8 in io_loop_run (ioloop=0xe9162373d00) at ioloop.c:739 No locals. #44 0x00000e91adb77655 in master_service_run (service=0xe9193c39600, callback=0x6) at master-service.c:853 No locals. #45 0x00000e8f25e70dd1 in main (argc=1, argv=<optimized out>) at main.c:532 set_roots = {0xe91adc66270 <smtp_submit_setting_parser_info>, 0xe8f25e7e310 <imap_setting_parser_info>, 0x0} login_set = { auth_socket_path = 0xe9136774490 "HEADER.FIELDS (DATE FROM SENDER SUBJECT TO CC MESSAGE-ID REFERENCES CONTENT-TYPE CONTENT-DESCRIPTION IN-REPLY-TO REPLY-TO LINES LIST-POST X-LABEL)", postlogin_socket_path = 0x0, postlogin_timeout_secs = 60, callback = 0xe8f25e70fc0 <login_client_connected>, failure_callback = 0xe8f25e712b0 <login_client_failed>, request_auth_token = true } username = <optimized out> storage_service_flags = <optimized out> service_flags = <optimized out> auth_socket_path = <optimized out> c = <optimized out> error = 0x7f7ffffcea18 "]\353\374\377\177\177" (gdb)

2 3

Where is dovemon
by lists＠mlserv.org 27 Jan '21

27 Jan '21

7 7

doveadm http api expunge call
by tim＠linux-daus.de 26 Jan '21

26 Jan '21

Hi all, i'm start porting some of my maintenance scripts from doveadm cli to doveadm http api. I stumble over the doveadm expunge call. The response doesn't contain any additional output but the generic doveadmresponse object without any additional information. The list is always empty wether the expunge has expunged some emails or not: [['doveadmResponse', [], 'tag1']] Other then the cli command wich outputs a list of the mails that were expunged. Is this a bug? Best regards, Tim

1 0

Forwarding parameters for imapc
by bra＠fsn.hu 26 Jan '21

26 Jan '21

Hi, I have the following IMAP setup: dovecot proxy -> dovecot server -> IMAP backend (imapc) What I want to achieve is to have the original client parameters from the proxy in the IMAP backend. Dovecot in proxy mode sends them via an ID command, like this: ID ("x-session-id" "SESS" "x-originating-ip" "IP" "x-originating-port" "PORT" "x-connected-ip" "IP" "x-connected-port" "PORT" "x-proxy-ttl" "4") Is it possible with current dovecot versions to send this to the imapc backend as well? Of course I would expect that if the dovecot proxy is in login_trusted_networks, information from it should be used (IMAP: ID, POP/LMTP: XCLIENT). If this is not the case, could you please implement it? Thanks,

1 0

Error "collect2: error: ld returned 213 exit status" when build Dovecot 2.3.13 on CentOS 7&8 with Valgrind
by Duc Anh Do 26 Jan '21

26 Jan '21

Hi all, I'm building Dovecot from source of Dovecot 2.3.13. When doing make check, I saw an error: make[1]: Entering directory '/home/xxx/rpmbuild/BUILD/xxx/dovecot-2.3.13/src/lib-ssl-iostream' for bin in test-iostream-ssl; do \ if ! /bin/sh ../../run-test.sh ../.. ./$bin; then exit 1; fi; \ done collect2: error: ld returned 213 exit status Failed to run: ./test-iostream-ssl This is my configuration in spec file: %configure \ INSTALL_DATA="install -c -p -m644" \ --docdir=%{_docdir}/%{name} \ --disable-static \ --disable-rpath \ --with-nss \ --with-shadow \ --with-pam \ --with-gssapi=plugin \ --with-ldap=plugin \ --with-sql=plugin \ --with-pgsql \ --with-mysql \ --with-sqlite \ --with-zlib \ --with-libcap \ --with-ssl=openssl \ --with-ssldir=%{ssldir} \ --with-docs I installed OpenSSL and Valgrind: # yum list installed | egrep "valgrind|openssl" openssl-devel.x86_64 1:1.1.1g-12.el8_3 @BaseOS openssl-libs.x86_64 1:1.1.1g-12.el8_3 @BaseOS valgrind.x86_64 1:3.16.0-2.el8 @AppStream valgrind-devel.x86_64 1:3.16.0-2.el8 @AppStream I investigated the problem and found something: - Unlike other lib-xxx, libtool doesn't generate executable binary test-iostream-ssl inside lib-ssl-iostream directory. That's a shell script and actual executable binary is inside ./libs directory ( https://www.gnu.org/software/libtool/manual/libtool.html#Linking-executables ): $ pwd /home/xxx/rpmbuild/BUILD/xxx/dovecot-2.3.13/src/lib-ssl-iostream $ file test-iostream-ssl test-iostream-ssl: POSIX shell script, ASCII text executable, with very long lines $ file .libs/test-iostream-ssl .libs/test-iostream-ssl: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 3.2.0, BuildID[sha1]=c6a800c253c38a7eb78886286ef779d871550a6c, with debug_info, not stripped, too many notes (256) That means when running make check, Valgrind will monitor the shell script generated by libtool instead of the actual test code. And error occurs. - To confirm, I changed Makefile a bit: $ pwd /home/xxx/rpmbuild/BUILD/xxx/dovecot-2.3.13/src/lib-ssl-iostream $ vim Makefile check-local: for bin in $(test_programs); do \ export LD_LIBRARY_PATH=./.libs; \ if ! $(RUN_TEST) ./.libs/$$bin; then exit 1; fi; \ done Then do make check: $ cd ~/rpmbuild/BUILD/xxx/dovecot-2.3.13 $ make -C src/lib-ssl-iostream/ clean $ make -C src/lib-ssl-iostream/ check make[1]: Entering directory '/home/xxx/rpmbuild/BUILD/xxx/dovecot-2.3.13/src/lib-ssl-iostream' for bin in test-iostream-ssl; do \ export LD_LIBRARY_PATH=./.libs; \ if ! /bin/sh -x ../../run-test.sh ../.. ./.libs/$bin; then exit 1; fi; \ #if ! /bin/sh -x ../../run-test.sh ../.. ./$bin; then exit 1; fi; \ done ssl: handshake ....................................................... : ok ssl: o_stream_get_buffer_avail_size .................................. : ok ssl: small packets ................................................... : ok 0 / 3 tests failed + ret=0 + test -s test.out~19257 + test 0 '!=' 0 + exit 0 + rm -f test.out~19257 make[1]: Leaving directory '/home/xxx/rpmbuild/BUILD/xxx/dovecot-2.3.13/src/lib-ssl-iostream' make: Leaving directory '/home/xxx/rpmbuild/BUILD/xxx/dovecot-2.3.13/src/lib-ssl-iostream' - According to the manual of libtool, if I use libtool to generate library and executable binary, I should use libtool to execute (or debug or anything else). That will avoid misconfiguration and unexpected errors: - https://www.gnu.org/software/libtool/manual/html_node/Debugging-executables… - https://stackoverflow.com/a/14186488 My patch looks like this: diff --git a/src/lib-ssl-iostream/Makefile.am b/src/lib-ssl-iostream/Makefile.am index 5aaea5d..17ebf1d 100644 --- a/src/lib-ssl-iostream/Makefile.am +++ b/src/lib-ssl-iostream/Makefile.am @@ -56,6 +56,6 @@ noinst_PROGRAMS = $(test_programs) check-local: for bin in $(test_programs); do \ - if ! $(RUN_TEST) ./$$bin; then exit 1; fi; \ + if ! $(LIBTOOL) --mode execute $(RUN_TEST) ./$$bin; then exit 1; fi; \ done endif Result: make[2]: Entering directory '/home/xxx/rpmbuild/BUILD/xxx/dovecot-2.3.13/src/lib-ssl-iostream' make check-local make[3]: Entering directory '/home/xxx/rpmbuild/BUILD/xxx/dovecot-2.3.13/src/lib-ssl-iostream' for bin in test-iostream-ssl; do \ if ! /bin/sh ../../libtool --mode execute /bin/sh ../../run-test.sh ../.. ./$bin; then exit 1; fi; \ done ssl: handshake ....................................................... : ok ssl: o_stream_get_buffer_avail_size .................................. : ok ssl: small packets ................................................... : ok 0 / 3 tests failed make[3]: Leaving directory '/home/xxx/rpmbuild/BUILD/xxx/dovecot-2.3.13/src/lib-ssl-iostream' make[2]: Leaving directory '/home/xxx/rpmbuild/BUILD/xxx/dovecot-2.3.13/src/lib-ssl-iostream' Can anyone help to correct my understanding and my patch? Thanks, Anh Do

2 2

Deliver to different namespace with address detail
by Tobia Grosselle [ Terralink ] 25 Jan '21

25 Jan '21

can anyone confirm this?

1 0

Re: [BUG REPORT] In some cases dovecot sends (huge) binary data to solr for indexing
by Alexey Panov 25 Jan '21

25 Jan '21

Hello John, Sorry for a bit delayed reply. For some reason some of dovecot mail list messages are not reaching my inbox :( Indeed, I can confirm that your patch works as expected: meaning strips out just the message body. So yes, in my report I supposed to say: message bodies of affected messages are being ignored completely. Sorry for confusion and thanks again for such a useful patch!

1 0

New dovecot server, authentication confusion
by Jeff Abrahamson 24 Jan '21

24 Jan '21

I've set up a new dovecot+postfix instance with virtual (not system) users. I've a few questions, mostly about auth. I /think/ that postfix handles auth by asking dovecot. Users need to provide user + password to send (smtps) and receive (imaps). I see where I've configured this for dovecot, which is /etc/dovecot/passwd.db. That file contains lines like this: jeff@mobilitains.fr:{BLF-CRYPT}$2y$05$c... What concerns me is that I see occasional log items like this: Jan 24 11:26:33 nantes-m1 postfix/smtpd[4597]: fatal: no SASL authentication mechanisms (Also, I can't connect with thunderbird.) But I think I've configured SASL auth, so I'm not sure what to look at / how to debug this. I'm looking for suggestions how to approach this. I do not see how postfix knows who is allowed to connect, however. Am I correct that postfix delegates SASL to dovecot? This is the relevant config, I think: [T] jeff@nantes-m1:log $ doveconf -n # 2.3.7.2 (3c910f64b): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.7.2 () # OS: Linux 5.4.0-64-generic x86_64 Ubuntu 20.04.1 LTS # Hostname: nantes-m1.p27.eu auth_verbose = yes mail_location = mbox:~/mail:INBOX=/var/mail/%u mail_privileged_group = mail namespace inbox { inbox = yes location = mailbox Archive { auto = subscribe special_use = \Archive } mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Junk { auto = subscribe special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox Trash { auto = subscribe special_use = \Trash } prefix = } passdb { args = username_format=%u scheme=blf-crypt /etc/dovecot/passwd.db driver = passwd-file } plugin { sieve = file:~/sieve;active=~/.dovecot.sieve sieve_after = /var/mail/vmail/sieve-after sieve_before = /var/mail/vmail/sieve-before sieve_dir = ~/sieve } protocols = " imap" ssl = required ssl_cert = </etc/letsencrypt/live/nantes-m1.p27.eu/fullchain.pem ssl_client_ca_dir = /etc/ssl/certs ssl_dh = # hidden, use -P to show it ssl_key = # hidden, use -P to show it userdb { args = uid=4000 gid=4000 home=/var/mail/vmail/%d/%n driver = static } protocol lda { deliver_log_format = msgid=%m: %$ mail_plugins = sieve postmaster_address = postmaster@{{ primary_domain }} quota_full_tempfail = yes rejection_reason = Your message to <%t> was automatically rejected:%n%r } protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep tb-lsub-flags mail_max_userip_connections = 20 } [T] jeff@nantes-m1:log $ [T] jeff@nantes-m1:log $ postconf -n | grep -i sasl broken_sasl_auth_clients = yes smtpd_recipient_restrictions = reject_unknown_client_hostname,reject_unknown_sender_domain,reject_unknown_recipient_domain,permit_mynetworks,permit_sasl_authenticated,reject_unauth_destination,reject_invalid_hostname,reject_non_fqdn_sender smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_authenticated_header = yes smtpd_sasl_local_domain = smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot [T] jeff@nantes-m1:log $ postconf -Mf smtp inet n - y - - smtpd submission inet n - y - - smtpd -o syslog_name=postfix/submission -o smtpd_tls_security_level=encrypt -o smtpd_sasl_auth_enable=yes -o smtpd_client_restrictions= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions= -o smtpd_relay_restrictions=permit_sasl_authenticated,reject -o milter_macro_daemon_name=ORIGINATING smtps inet n - y - - smtpd -o syslog_name=postfix/smtps -o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes -o smtpd_reject_unlisted_recipient=no -o smtpd_client_restrictions= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions= -o smtpd_relay_restrictions=permit_sasl_authenticated,reject -o milter_macro_daemon_name=ORIGINATING ... Many thanks for any pointers. I'm also a bit confused on how to test it, really, short of connecting with a regular email client (mutt, thunderbird, etc.). If there are more appropriate tools that I've missed, I'm quite open to pointers. -- Jeff Abrahamson +33 6 24 40 01 57 +44 7920 594 255 http://p27.eu/jeff/ http://transport-nantes.com/

2 2

New dovecot server, authentication confusion
by Jeff Abrahamson 24 Jan '21

24 Jan '21

I've set up a new dovecot+postfix instance with virtual (not system) users. I've a few questions, mostly about auth. I /think/ that postfix handles auth by asking dovecot. Users need to provide user + password to send (smtps) and receive (imaps). I see where I've configured this for dovecot, which is /etc/dovecot/passwd.db. That file contains lines like this: jeff@mobilitains.fr:{BLF-CRYPT}$2y$05$c... What concerns me is that I see occasional log items like this: Jan 24 11:26:33 nantes-m1 postfix/smtpd[4597]: fatal: no SASL authentication mechanisms (Also, I can't connect with thunderbird.) But I think I've configured SASL auth, so I'm not sure what to look at / how to debug this. I'm looking for suggestions how to approach this. I do not see how postfix knows who is allowed to connect, however. Am I correct that postfix delegates SASL to dovecot? This is the relevant config, I think: [T] jeff@nantes-m1:log $ doveconf -n # 2.3.7.2 (3c910f64b): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.7.2 () # OS: Linux 5.4.0-64-generic x86_64 Ubuntu 20.04.1 LTS # Hostname: nantes-m1.p27.eu auth_verbose = yes mail_location = mbox:~/mail:INBOX=/var/mail/%u mail_privileged_group = mail namespace inbox { inbox = yes location = mailbox Archive { auto = subscribe special_use = \Archive } mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Junk { auto = subscribe special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox Trash { auto = subscribe special_use = \Trash } prefix = } passdb { args = username_format=%u scheme=blf-crypt /etc/dovecot/passwd.db driver = passwd-file } plugin { sieve = file:~/sieve;active=~/.dovecot.sieve sieve_after = /var/mail/vmail/sieve-after sieve_before = /var/mail/vmail/sieve-before sieve_dir = ~/sieve } protocols = " imap" ssl = required ssl_cert = </etc/letsencrypt/live/nantes-m1.p27.eu/fullchain.pem ssl_client_ca_dir = /etc/ssl/certs ssl_dh = # hidden, use -P to show it ssl_key = # hidden, use -P to show it userdb { args = uid=4000 gid=4000 home=/var/mail/vmail/%d/%n driver = static } protocol lda { deliver_log_format = msgid=%m: %$ mail_plugins = sieve postmaster_address = postmaster@{{ primary_domain }} quota_full_tempfail = yes rejection_reason = Your message to <%t> was automatically rejected:%n%r } protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep tb-lsub-flags mail_max_userip_connections = 20 } [T] jeff@nantes-m1:log $ [T] jeff@nantes-m1:log $ postconf -n | grep -i sasl broken_sasl_auth_clients = yes smtpd_recipient_restrictions = reject_unknown_client_hostname,reject_unknown_sender_domain,reject_unknown_recipient_domain,permit_mynetworks,permit_sasl_authenticated,reject_unauth_destination,reject_invalid_hostname,reject_non_fqdn_sender smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_authenticated_header = yes smtpd_sasl_local_domain = smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot [T] jeff@nantes-m1:log $ postconf -Mf smtp inet n - y - - smtpd submission inet n - y - - smtpd -o syslog_name=postfix/submission -o smtpd_tls_security_level=encrypt -o smtpd_sasl_auth_enable=yes -o smtpd_client_restrictions= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions= -o smtpd_relay_restrictions=permit_sasl_authenticated,reject -o milter_macro_daemon_name=ORIGINATING smtps inet n - y - - smtpd -o syslog_name=postfix/smtps -o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes -o smtpd_reject_unlisted_recipient=no -o smtpd_client_restrictions= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions= -o smtpd_relay_restrictions=permit_sasl_authenticated,reject -o milter_macro_daemon_name=ORIGINATING ... Many thanks for any pointers. I'm also a bit confused on how to test it, really, short of connecting with a regular email client (mutt, thunderbird, etc.). If there are more appropriate tools that I've missed, I'm quite open to pointers. -- Jeff Abrahamson +33 6 24 40 01 57 +44 7920 594 255 http://p27.eu/jeff/ http://transport-nantes.com/

1 0

Massive /tmp files
by MRob 22 Jan '21

22 Jan '21

Hello, I just found user who has single folder (standard maildir format) that filled with over 8mil files and 800GB in the /tmp subdirectory of that folder: /email/domain/username/.Folder/tmp The files in there are normal maildir email files. I think the dir ran out of inode space so its not ongoing problem. My question is only can I purge that folder without breaking something more? If it tries to re-fill again I will try to debug Thankyou!!

5 8

[BUG REPORT] In some cases dovecot sends (huge) binary data to solr for indexing
by Alexey Panov 21 Jan '21

21 Jan '21

In some cases (exact condition still unknown) dovecot sends binary data (attachments) to SOLR for indexing. This reduces index and overall FTS efficiency dramatically. In extreme condition (below an example of 20MB) dovecot’s hardwired timeout of 60s gets triggered during HTTP exchange with SOLR on just a single file. This results in an unfinished index which, by initial indexing, gets restarted over and over. With multiple affected mailboxes even on moderate usage this can cause an IO overload of the whole system. Message example (doveadm fetch text): https://filebin.ca/5oy5Wc1QrBK3/fetch-text.obfuscated.txt <https://filebin.ca/5oy5Wc1QrBK3/fetch-text.obfuscated.txt> Corresponding raw log data: https://filebin.ca/5oy6yqLSCr3H/rawlog.obfuscated.txt <https://filebin.ca/5oy6yqLSCr3H/rawlog.obfuscated.txt> (Both files were processed with perl doveadm-obfuscate.pl <https://www.dovecot.org/tools/doveadm-obfuscate.pl>; the script doesn’t replace non-latin characters so they were replaced with ‘R’ manually) Workaround: there is a useful patch by John Fawcett <https://www.mail-archive.com/dovecot@dovecot.org/msg82296.html> that allows to set the FTS indexing message body maximum size. It works perfectly, but affected messages are getting completely ignored by FTS. This bug report is a summarised result of this discussion <https://www.mail-archive.com/dovecot@dovecot.org/msg82599.html>.

2 1

Deliver to different namespace with address detail
by Tobia Grosselle [ Terralink ] 21 Jan '21

21 Jan '21

Hello, with this settings: Dovecot 2.3.7.2 (3c910f64b) namespace { list = yes type = private inbox = yes prefix = INBOX/ separator = / } namespace Archive { list = yes type = private inbox = no prefix = Archive/ separator = / mailbox Incoming { auto = create } } lmtp_save_to_detail_mailbox = yes recipient_delimiter = + userdb_query = SELECT accounts.username AS user, accounts.home AS home, CONCAT('mdbox:', accounts.home, '/mdbox') AS mail, CONCAT('mdbox:', accounts.home, '/archive') AS 'namespace/Archive/location', 'vmail' AS uid, 'vmail' as gid FROM accounts WHERE accounts.username = '%u' it is possible to deliver an email to Archive namespace instead of inbox with address detail (email+Archive/Incoming@domain)? If i try i see that the lmtp service search the path from the inbox namespace (so INBOX/Archive/Incoming). Thanks

2 2

Sieve fileinto :create is failing
by Ron Garret 21 Jan '21

21 Jan '21

I’m trying to get a sieve script to move messages into a folder, and to create that folder if it doesn’t already exist. I’m following the example code at: https://doc.dovecot.org/configuration_manual/sieve/examples/ and doing this: > require ["fileinto", "mailbox”]; > … > fileinto :create “myfolder”; > … That results in this error in the log file: error: unknown tagged argument ':create' for the fileinto command What am I doing wrong? rg

4 8

Where does sieve store its "vacation" state?
by Ron Garret 21 Jan '21

21 Jan '21

Pigeonhole/sieve has a “vacation” feature that keeps track of which addresses it has sent messages to already so it doesn’t send too many. The state for this feature seems to survive a dovecot restart, so it must be persistent somewhere and not just stored in RAM. But I don’t recall configuring any place where that state would reside. So where is it? rg

2 1

Mail crypt plugin with HSM
by Dima Kovalyov 21 Jan '21

21 Jan '21

Hello Dovecot developers, I'm using a mail-crypt plugin to perform encryption at rest using per user keys encrypted with their password. Great plugin and I really appreciate it's continuous development and improvement. I have a question regarding mail-crypt keys being stored in HSM. Is it possible? I'm almost sure I've seen some discussion about usage of PKCS#11 in mail-crypt but can't find it in the mailing list. Please advise. Thanks! - Dima

1 0

Timeout/Event leak
by Lefteris Tsintjelis 20 Jan '21

20 Jan '21

Hi, any idea what all this is? Jan 19 18:23:00 master: Warning: Killed with signal 15 (by pid=33729 uid=0 code=kill) Jan 19 18:23:03 config: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) Jan 19 18:23:03 stats: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) Jan 19 18:23:03 auth: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) Jan 19 18:23:03 auth: Warning: Timeout leak: 0x1059ce0 (auth-request-handler.c:617) Jan 19 18:23:03 auth: Warning: Timeout leak: 0x1059ce0 (auth-request-handler.c:617) Jan 19 18:23:03 auth: Warning: Timeout leak: 0x1059ce0 (auth-request-handler.c:617) Jan 19 18:23:03 auth: Warning: Timeout leak: 0x1059ce0 (auth-request-handler.c:617) Jan 19 18:23:03 auth: Warning: Timeout leak: 0x1059ce0 (auth-request-handler.c:617) Jan 19 18:23:03 auth: Warning: Timeout leak: 0x1059ce0 (auth-request-handler.c:617) Jan 19 18:23:03 auth: Warning: Timeout leak: 0x1059ce0 (auth-request-handler.c:617) Jan 19 18:23:03 auth: Warning: Timeout leak: 0x1059ce0 (auth-request-handler.c:617) Jan 19 18:23:03 auth: Warning: Timeout leak: 0x1059ce0 (auth-request-handler.c:617) Jan 19 18:23:03 auth: Warning: Timeout leak: 0x1059ce0 (auth-request-handler.c:617) Jan 19 18:23:03 auth: Warning: Event 0x120f0020 leaked (parent=0x120ecc20): auth-request.c:621 Jan 19 18:23:03 auth: Warning: Event 0x120ece20 leaked (parent=0x120ecc20): auth-request.c:111 Jan 19 18:23:03 auth: Warning: Event 0x120ecc20 leaked (parent=0x120ca620): auth-request.c:110 Jan 19 18:23:03 auth: Warning: Event 0x120eca20 leaked (parent=0x120ec620): auth-request.c:621 Jan 19 18:23:03 auth: Warning: Event 0x120ec820 leaked (parent=0x120ec620): auth-request.c:111 Jan 19 18:23:03 auth: Warning: Event 0x120ec620 leaked (parent=0x120b8620): auth-request.c:110 Jan 19 18:23:03 auth: Warning: Event 0x120ec220 leaked (parent=0x1207ee20): auth-request.c:667 Jan 19 18:23:03 auth: Warning: Event 0x120ec020 leaked (parent=0x1207ee20): auth-request.c:111 Jan 19 18:23:03 auth: Warning: Event 0x1207ee20 leaked (parent=0x12087220): auth-request.c:110 Jan 19 18:23:03 auth: Warning: Event 0x1207ec20 leaked (parent=0x1207e820): auth-request.c:667 Jan 19 18:23:03 auth: Warning: Event 0x1207ea20 leaked (parent=0x1207e820): auth-request.c:111 Jan 19 18:23:03 auth: Warning: Event 0x1207e820 leaked (parent=0x12087220): auth-request.c:110 Jan 19 18:23:03 auth: Warning: Event 0x1207e620 leaked (parent=0x1207e220): auth-request.c:621 Jan 19 18:23:03 auth: Warning: Event 0x1207e420 leaked (parent=0x1207e220): auth-request.c:111 Jan 19 18:23:03 auth: Warning: Event 0x1207e220 leaked (parent=0x120ca620): auth-request.c:110 Jan 19 18:23:03 auth: Warning: Event 0x1207e020 leaked (parent=0x120ada20): auth-request.c:621 Jan 19 18:23:03 auth: Warning: Event 0x120adc20 leaked (parent=0x120ada20): auth-request.c:111 Jan 19 18:23:03 auth: Warning: Event 0x120ada20 leaked (parent=0x120ad820): auth-request.c:110 Jan 19 18:23:03 auth: Warning: Event 0x120ad820 leaked (parent=0x12087220): auth-client-connection.c:338 Jan 19 18:23:03 auth: Warning: Event 0x120ad220 leaked (parent=0x120b8a20): auth-request.c:621 Jan 19 18:23:03 auth: Warning: Event 0x120ad020 leaked (parent=0x120b8a20): auth-request.c:111 Jan 19 18:23:03 auth: Warning: Event 0x120b8a20 leaked (parent=0x120ca620): auth-request.c:110 Jan 19 18:23:03 auth: Warning: Event 0x120b8420 leaked (parent=0x120cac20): auth-request.c:621 Jan 19 18:23:03 auth: Warning: Event 0x120cae20 leaked (parent=0x120cac20): auth-request.c:111 Jan 19 18:23:03 auth: Warning: Event 0x120cac20 leaked (parent=0x120caa20): auth-request.c:110 Jan 19 18:23:03 auth: Warning: Event 0x120caa20 leaked (parent=0x12087220): auth-client-connection.c:338 Thank you

2 2

Dovecot Gmail OAuth2.0 Setting Question
by 福田泰葵 19 Jan '21

19 Jan '21

Dear Sir or Madam Unable to build OAuth2.0 authentication to Gmail using dovecot as proxy. I have a question about how to use dovecot as a proxy to perform OAuth 2.0 authentication to Gmail using a mail client. 1. Is the following all I need to do to authenticate to Gmail using dovecot as a proxy? - passdb passdb { driver = oauth2 mechanisms = oauthbearer xoauth2 args = /etc/dovecot/dovecot-oauth2.token.conf.ext } passdb { driver = oauth2 mechanisms = plain login args = /etc/dovecot/dovecot-oauth2.plain.conf.ext } - create dovecot-oauth2.token.conf.ext and dovecot-oauth2.plain.conf.ext - create gmail service account api 2. grant_url in dovecot-oauth2.token.conf.ext and dovecot-oauth2.plain.conf.ext is URL for obtaining a Google access token for a web server that I have built myself? 3. I use a Gmail service account, so I don’t need a client ID and secret ID, right? 4. Do I set introspection_url to the URL of my own web server with the access token used for authentication to Google as the response? 5. The documentation says “pass_attrs = host=127.0.0.1”, but if you are authenticating to Gmail, I should use “pass_attrs = proxy=y host=%{if;%s;eq;imap;imap.gmail.com;%{if;%s;eq;pop3;smtp .gmail.com;pop.gmail.com}} port=%{if;%s;eq;imap;993;%{if;%s;eq;pop3;587;465}} proxy_mech=xoauth2 pass=%{oauth2:access_token} user=%{oauth2:email oauth2:email}”? 6. What is the difference between dovecot-oauth2.token.conf.ext and dovecot-oauth2.plain.conf.ext ? Do I need to configure both? I used https://doc.dovecot.org/configuration_manual/authentication/oauth2/#proxy as a reference. I would appreciate your reply. Yours faithfully, ------------------------------ e-mail: taiki.fukuda(a)justsystems.com TEL: 03-5324-7900 mobile: 080-6198-7328 ------------------------------

1 0

dovecot 2.3.13 : make check FAILURE : Assert failed: buffer_append_full_file
by J Lumby 19 Jan '21

19 Jan '21

After successfully building dovecot 2.3.13 (linux kernel 5.10.1 , glibc-2.32 , gcc-9.3) make check had one failure as follows : test-buffer-istream.c:54: Assert failed: buffer_append_full_file(result, TEST_FILENAME, SIZE_MAX, &error) == BUFFER_APPEND_READ_ERROR test-buffer-istream.c:56: Assert failed: error != NULL && *error != '\0' buffer_append_full_file .............................................. : FAILED After a brief look at the referenced code in test-buffer-istream.c , I can't find out what this FAIL really means or whether it is serious. The assert is finding that the result of the call to buffer_append_full_file is not BUFFER_APPEND_READ_ERROR, but it does not report what the result code actually was. Maybe errno was actually 0 and call succeeded? I don't know. Nor can I see how to add some code to find out. Can anyone offer any advice on what this means and/or how to investigate? Cheers, John Lumby

2 6

Changing the default delivery mailbox to something other than INBOX
by Ron Garret 18 Jan '21

18 Jan '21

Is there an easy way (i.e. a built-in configuration setting) to change the name of the mailbox that the dovecot LDA delivers mail into? The default is INBOX but I’d like mail to be delivered to some other mailbox. The reason for this is that I want all incoming mail to be invisible to the user by default until it has been screened for viruses and spam. I know I could do this with Sieve, but that is a PITA. More details in case anyone is interested: The goal of this filter is to make it work with very little training. To bootstrap the process, the filter is given access to outgoing mail (via a milter) which it uses as a reliable training corpus for good messages. It then leverages that information to filter incoming messages. For example, messages from senders which have been the recipients of outgoing messages are presumed to be good. There is also a spam honeypot to provide a reliable spam corpus. One of the heuristics I want to use is to look for the same subject line in multiple messages from unknown users received over a period of an hour or so because those are almost invariably spam. But that requires a time delay between when a message is received and when it is filtered, and that in turn requires a place to store messages for a while before they are processed. While they are in that temporary storage, I don’t want them in the user’s face, but I do want them to be accessible if the user wants to see them (e.g. if they know that an important message is coming in which may be stuck in the temp storage). So I’d like to make something like an INCOMING mailbox where all mail is delivered. The messages in INCOMING are scanned by the filter and moved to Junk or INBOX as appropriate. Thanks, rg

3 12

mbox to pst advice
by Marc Roos 18 Jan '21

18 Jan '21

Anyone an idea how to convert mbox ot pst on linux?

3 6

fts_solr: Indexing failed (fails on particular messages/mailboxes by timeout)
by Alexey Panov 18 Jan '21

18 Jan '21

Hello, I am running recent dovecot 2.3.13 (89f716dc2) within dockerized mailcow setup. During just another update routine I decided to reindex all mailboxes and some of them fail (timeout) on exactly SAME messages in SAME mailboxes: > doveadm(u@d): Error: fts_solr: Indexing failed: Request timed out (Request queued 73.213 secs ago, 1 send attempts in 73.098 secs, 60.597 in http ioloop, 0.000 in other ioloops, connected 127.875 secs ago) > doveadm(u@d): Error: Mailbox Sent: Mail search failed: Internal error occurred. Refer to server log for more information. [2021-01-14 11:23:46] > doveadm(u@d): Error: Mailbox Sent: Transaction commit failed: FTS transaction commit failed: backend deinit This error is persistent and affects only some, but always same folders of same mailboxes (i mean solr can't finish indexing them at all). I/O is in perfect condition and has no corruptions. I also tried to do fts rescan which made no change. RAM is fine, I haven't seen OOM conditions. During my research I found this discussion <https://www.mail-archive.com/dovecot@dovecot.org/msg76944.html> which lead me idea of reducing the batch_size to as low as 10 (for testing purposes). Observing SOLR logs during reindexing on the mailbox/folder causing the error I noticed the following strange behaviour. Firstly, it goes very fast but then always kinda freezes on these messages: > solr-mailcow_1 | 2021-01-14 16:05:09.615 INFO (qtp524223214-1151) [ x:dovecot-fts] o.a.s.u.p.LogUpdateProcessorFactory [dovecot-fts] webapp=/solr path=/update params={}{add=[6883/78a0ec27b091da5e4054000013681708/u@d (1688878773188952064), 6884/78a0ec27b091da5e4054000013681708/u@d (1688878773203632128), 6885/78a0ec27b091da5e4054000013681708/u@d (1688878773218312192), 6886/78a0ec27b091da5e4054000013681708/u@d (1688878773227749376), 6887/78a0ec27b091da5e4054000013681708/u@d (1688878773237186560), 6888/78a0ec27b091da5e4054000013681708/u@d (1688878773244526592), 6889/78a0ec27b091da5e4054000013681708/u@d (1688878773250818048), 6890/78a0ec27b091da5e4054000013681708/u@d (1688878773259206656), 6891/78a0ec27b091da5e4054000013681708/u@d (1688878773272838144), 6892/78a0ec27b091da5e4054000013681708/u@d (1688878773288566784)]} 0 101 > solr-mailcow_1 | 2021-01-14 16:06:42.540 INFO (qtp524223214-1143) [ x:dovecot-fts] o.a.s.u.p.LogUpdateProcessorFactory [dovecot-fts] webapp=/solr path=/update params={}{add=[6893/78a0ec27b091da5e4054000013681708/u@d (1688878773329461248), 6894/78a0ec27b091da5e4054000013681708/u@d (1688878773332606976), 6895/78a0ec27b091da5e4054000013681708/u@d (1688878774361260032), 6896/78a0ec27b091da5e4054000013681708/u@d (1688878850290745344), 6897/78a0ec27b091da5e4054000013681708/u@d (1688878851347709952), 6898/78a0ec27b091da5e4054000013681708/u@d (1688878852404674560), 6899/78a0ec27b091da5e4054000013681708/u@d (1688878853586419712), 6900/78a0ec27b091da5e4054000013681708/u@d (1688878870704422912), 6901/78a0ec27b091da5e4054000013681708/u@d (1688878870709665792), 6902/78a0ec27b091da5e4054000013681708/u@d (1688878870727491584)]} 0 92891 It takes almost one and a half minute to get those ten messages (6893-6902) indexed. It freezes exactly on that position every time I restart indexing. Actually only reducing the batch_size to 10 made it through. It was timing out with the default batch_size exactly here each time. Than it goes further again blazing fast until it reaches here: > solr-mailcow_1 | 2021-01-14 16:07:26.148 INFO (qtp524223214-1151) [ x:dovecot-fts] o.a.s.u.p.LogUpdateProcessorFactory [dovecot-fts] webapp=/solr path=/update params={}{add=[7443/78a0ec27b091da5e4054000013681708/u@d (1688878884286627840), 7444/78a0ec27b091da5e4054000013681708/u@d (1688878884293967872), 7445/78a0ec27b091da5e4054000013681708/u@d (1688878884304453632), 7446/78a0ec27b091da5e4054000013681708/u@d (1688878884502634496), 7447/78a0ec27b091da5e4054000013681708/u@d (1688878900331937792), 7448/78a0ec27b091da5e4054000013681708/u@d (1688878900508098560), 7449/78a0ec27b091da5e4054000013681708/u@d (1688878916409753600), 7450/78a0ec27b091da5e4054000013681708/u@d (1688878916424433664), 7451/78a0ec27b091da5e4054000013681708/u@d (1688878916438065152), 7452/78a0ec27b091da5e4054000013681708/u@d (1688878916448550912)]} 0 30682 > solr-mailcow_1 | 2021-01-14 16:09:40.277 INFO (qtp524223214-1325) [ x:dovecot-fts] o.a.s.u.p.LogUpdateProcessorFactory [dovecot-fts] webapp=/solr path=/update params={}{add=[7463/78a0ec27b091da5e4054000013681708/u@d (1688879057103486976)]} 0 1 > solr-mailcow_1 | 2021-01-14 16:10:00.628 INFO (qtp524223214-1009) [ x:dovecot-fts] o.a.s.u.p.LogUpdateProcessorFactory [dovecot-fts] webapp=/solr path=/update params={}{add=[7453/78a0ec27b091da5e4054000013681708/u@d (1688878916486299648), 7454/78a0ec27b091da5e4054000013681708/u@d (1688878916489445376), 7455/78a0ec27b091da5e4054000013681708/u@d (1688878916496785408), 7456/78a0ec27b091da5e4054000013681708/u@d (1688878917584158720), 7457/78a0ec27b091da5e4054000013681708/u@d (1688878994974310400), 7458/78a0ec27b091da5e4054000013681708/u@d (1688879073177108480), 7459/78a0ec27b091da5e4054000013681708/u@d (1688879074234073088), 7460/78a0ec27b091da5e4054000013681708/u@d (1688879075288940544), 7461/78a0ec27b091da5e4054000013681708/u@d (1688879076339613696), 7462/78a0ec27b091da5e4054000013681708/u@d (1688879077392384000)]} 0 154455 This results in the following error on the console where I start reindexing: > $ docker-compose exec dovecot-mailcow doveadm index -u u@d 'Sent' > doveadm(u@d): Error: fts_solr: Indexing failed: Request timed out (Request queued 134.122 secs ago, 1 send attempts in 134.098 secs, 131.923 in http ioloop, 0.000 in other ioloops, connected 376.408 secs ago) > doveadm(u@d): Error: Mailbox Sent: Mail search failed: Internal error occurred. Refer to server log for more information. [2021-01-14 17:09:40] > doveadm(u@d): Error: Mailbox Sent: Transaction commit failed: FTS transaction commit failed: backend deinit The last message about indexed block of ten messages (2021-01-14 16:10:00.628 7453-7462) arrives already after reindexing error on the other console occurs and doveadm exits. Interestingly, exactly at the time mentioned in the error message (2021-01-14 17:09:40, i.e. 16:06:40 - I don’t know why timezone differs) a message about indexing of a single message 7463 arrives (which is actually NEXT message to the block that gets indexed 20 seconds later). The whole mailbox consists of 8530 messages and doveadm/solr can’t finish indexing it at all starting over and over. Can you please help me understanding the reason of this behaviour? P.S. Is there any possibility to determine what message in vmail maildir corresponds to solr log, e.g. to 7463/78a0ec27b091da5e4054000013681708/u@d (1688879057103486976) ? Thanks, Programmierus

2 4

Additional custom fields in map dict with static values.
by Mimiko 17 Jan '21

17 Jan '21

Hello. Dovector version 2.2.27. How can I add custom fields in the map for the last_login. For example: map { pattern = shared/last_login/imap/$user/$client_ip table = users_last_login value_field = last_login_imap_int value_type = string fields { userid = $user last_login_client_ip_imap = $client_ip custom_field_name = some_static_value } }

1 0

Antispam plugin
by Maciej Milaszewski 17 Jan '21

17 Jan '21

Hi System centos8 + dovecot-2.3.8 from repo # 2.3.8 (9df20d2db): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.8 (b7b03ba2) # OS: Linux 4.18.0-193.19.1.el8_2.x86_64 x86_64 CentOS Linux release 8.2.2004 (Core) I need "Antispam plugin". What antispam-plugin I must use ? In older version dovecot-2.2.36.4 i use "dovecot-antispam-plugin" but in centos I had a problem with configure - probably toold wersion "./configure: line 3193: DC_DOVECOT: command not found" In wiki dovect is "antispam-plugin" I try this http://hg.dovecot.org/dovecot-antispam-plugin but get 404 Backand spamassassin

4 3

Re: dovecot 2.3.13 : make check FAILURE : Assert failed: buffer_append_full_file
by steve＠keptprivate.com 16 Jan '21

16 Jan '21

I was experiencing multiple failures with make check on a fresh installation of CentOS 8.3.The solution for me was to use mock instead of rpmbuild. (I was not building as root with rpmbuild.) With mock all tests were successful. Sent from my T-Mobile 4G LTE device------ Original message------From: J LumbyDate: Sat, Jan 16, 2021 11:31 AMTo: dovecot(a)dovecot.org;Cc: Subject:dovecot 2.3.13 : make check FAILURE : Assert failed: buffer_append_full_fileAfter successfully building dovecot 2.3.13 (linux kernel 5.10.1 , glibc-2.32 , gcc-9.3) make check had one failure as follows : test-buffer-istream.c:54: Assert failed: buffer_append_full_file(result, TEST_FILENAME, SIZE_MAX, &error) == BUFFER_APPEND_READ_ERROR test-buffer-istream.c:56: Assert failed: error != NULL && *error != '\0' buffer_append_full_file .............................................. : FAILED After a brief look at the referenced code in test-buffer-istream.c , I can't find out what this FAIL really means or whether it is serious. The assert is finding that the result of the call to buffer_append_full_file is not BUFFER_APPEND_READ_ERROR, but it does not report what the result code actually was. Maybe errno was actually 0 and call succeeded? I don't know. Nor can I see how to add some code to find out. Can anyone offer any advice on what this means and/or how to investigate? Cheers, John Lumby

1 0

outlook 2019 imap folder subscription
by Alexander Rivanykov 16 Jan '21

16 Jan '21

1 0

The use of %w in password_query leads to "Failed to expand plugin setting" error
by Filidor Wiese 16 Jan '21

16 Jan '21

Hi, I'm trying to convert my existing users to a more modern password scheme by following the how-to at https://wiki.dovecot.org/HowTo/ConvertPasswordSchemes. One of the steps is to include the use of '%w' in the password_query, like so: password_query = \ SELECT domain, password, '%w' AS userdb_plain_pass, \ domain as userdb_domain, concat('*:storage=', quota) AS userdb_quota_rule, 5000 as userdb_uid, 5000 as userdb_gid, '/home/%d/%n' as userdb_home \ FROM users WHERE (catch='%n' AND domain='%d') and also to configure: userdb { driver = prefetch } in order to combine the user/password_query into one. Now that all seemed to work well, except for one thing. When a user has a % sign in their password, the following error occurs: Error: Failed to expand plugin setting plain_pass = 'Tfew3322gYEp$%5Qjk0': Unknown variable '%Q' Which indicates that dovecot is trying to expand variables in the password. As a consequence, the login process fails. Is there some way around this behavior? Thanks in advance, Filidor Wiese

4 5

Replication issue: cannot delete or rename folders
by ppq＠tuta.io 15 Jan '21

15 Jan '21

Hi all, I'm trying to replace a shared NFS (rock solid, btw) with a replicated two-node setup. However I've been struggling with an issue connected in some way with the replication between the two servers (master-master). The issue is once a folder (say "aaa") is created one one account, it cannot be renamed or deleted. If deleted, it will instantly reappear (when replication is running) or when renamed to "bbb", the operation will fail with an error like the one below: Jan 15 18:21:22 ms1 dovecot: dsync-local(test2(a)mydomain.ext)<JtJJARLPAWBPJAAAxdOQ8Q>: Error: rename(/var/vmail-local/mydomain.ext/test2/idx/.bbb <http://mydomain.ext/test2/idx/.bbb>, /var/vmail-local/mydomain.ext/test2/idx/.aaa <http://mydomain.ext/test2/idx/.aaa>) failed: Directory not empty Jan 15 18:21:22 ms1 dovecot: dsync-local(test2(a)mydomain.ext)<JtJJARLPAWBPJAAAxdOQ8Q>: Error: rename(/var/vmail-local/mydomain.ext/test2/idx/.bbb <http://mydomain.ext/test2/idx/.bbb>, /var/vmail-local/mydomain.ext/test2/idx/.aaa <http://mydomain.ext/test2/idx/.aaa>) failed: Directory not empty I can see that the index directory contains both the .aaa and .bbb index directories with dovecot.log files inside. If I stop the one of the nodes all works nicely and I can create, delete and rename folders at will. My setup is as below. dovecot --version -> 2.3.4.1 (f79e8e7e4) the indexes are in a separate directory on /var/vmail-local/ (performance reasons). the mail spool is mounted on /var/vmail/ One node has local disks for everything. It runs with mmap_disable=no, mail_fsync=optimized, mail_nfs_storage=no, mail_nfs_index=no The other node has an NFS based /var/vmail/ and local disks for indexes. On this node I'm using the following settings: mmap_disable=yes, mail_fsync=always, mail_nfs_storage=yes, mail_nfs_index=no The nfs server is v4 The two servers are "orchestrated" by a two-node director cluster. I'm sure I'm missing or misconfigured something. The doveconf -n config is, part from the NFS quick, the same on both nodes as follows: -------- # 2.3.4.1 (f79e8e7e4): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.4 () doveconf: Warning: service auth { client_limit=1000 } is lower than required under max. load (2012) doveconf: Warning: service anvil { client_limit=1000 } is lower than required under max. load (1515) # OS: Linux 5.4.78-2-pve x86_64 Debian 10.7 # Hostname: dovecot1.mydomain.ext auth_master_user_separator = + auth_mechanisms = plain login default_process_limit = 500 disable_plaintext_auth = no doveadm_password = # hidden, use -P to show it doveadm_port = 12727 imap_capability = +SPECIAL-USE XLIST listen = *,[::] lmtp_rcpt_check_quota = yes log_timestamp = "%Y-%m-%d %H:%M:%S " login_trusted_networks = 172.16.20.0/24 172.16.30.0/24 mail_fsync = always mail_max_userip_connections = 100 mail_nfs_storage = yes mail_plugins = quota notify replication lazy_expunge acl mail_privileged_group = vmail mmap_disable = yes namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox EXPUNGED { autoexpunge = 1 days autoexpunge_max_mails = 20 } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = separator = . } passdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } passdb { args = /etc/dovecot/master-users driver = passwd-file master = yes result_success = continue } passdb { driver = pam } plugin { acl = vfile:/etc/dovecot/dovecot.acl lazy_expunge = EXPUNGED mail_replica = tcp:172.16.30.100:12727 quota = dict:user::file:/var/vmail/%d/%n/.quotausage quota_rule = EXPUNGED:ignore quota_status_nouser = DUNNO quota_status_overquota = 552 5.2.2 Mailbox is full quota_status_success = DUNNO sieve = /var/vmail/%d/%n/.sieve sieve_after = /var/vmail/%d/%n/.ispconfig.sieve sieve_before = /var/vmail/%d/%n/.ispconfig-before.sieve sieve_max_actions = 100 sieve_max_redirects = 25 sieve_max_script_size = 2M } protocols = imap pop3 lmtp service aggregator { fifo_listener replication-notify-fifo { group = root mode = 0660 user = vmail } unix_listener replication-notify { group = root mode = 0660 user = vmail } } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { group = vmail mode = 0600 user = vmail } user = root } service doveadm { inet_listener { port = 12727 } } service imap-login { client_limit = 1000 process_limit = 512 } service lmtp { inet_listener lmtp { port = 24 } unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0600 user = postfix } } service quota-status { client_limit = 1 executable = quota-status -p postfix unix_listener /var/spool/postfix/private/quota-status { group = postfix mode = 0660 user = postfix } } service replicator { process_min_avail = 1 unix_listener replicator-doveadm { mode = 0600 user = vmail } } service stats { unix_listener stats-reader { group = vmail mode = 0660 user = vmail } unix_listener stats-writer { group = vmail mode = 0660 user = vmail } } ssl = required ssl_cert = </etc/letsencrypt/live/mail.mydomain.ext/fullchain.pem <http://mail.mydomain.ext/fullchain.pem> ssl_dh = # hidden, use -P to show it ssl_key = # hidden, use -P to show it userdb { driver = prefetch } userdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } userdb { driver = passwd } protocol imap { auth_verbose = yes mail_plugins = quota imap_quota notify replication lazy_expunge acl } protocol pop3 { auth_verbose = yes mail_plugins = quota notify replication lazy_expunge acl pop3_uidl_format = %08Xu%08Xv } protocol lda { mail_plugins = sieve quota notify replication lazy_expunge acl postmaster_address = postmaster(a)dovecot1.mydomain.ext } protocol lmtp { mail_plugins = quota sieve notify replication lazy_expunge acl postmaster_address = postmaster(a)dovecot1.mydomain.ext } -------------- My sql config is this: --- password_query = SELECT email as user, password, maildir as userdb_home, CONCAT( maildir_format, ':', maildir, '/', IF(maildir_format='maildir','Maildir',maildir_format)) as userdb_mail, uid as userdb_uid, gid as userdb_gid, CONCAT('*:storage=', quota, 'B') AS userdb_quota_rule, CONCAT(maildir, '/.sieve') as userdb_sieve FROM mail_user WHERE (login = '%u' OR email = '%u') AND `disable%Ls` = 'n' AND server_id = '20' AND EXISTS (SELECT domain_id FROM mail_domain WHERE domain = '%d' AND active = 'y' AND server_id = 20) user_query = SELECT email as user, maildir as home, CONCAT( maildir_format, ':', maildir, '/', IF(maildir_format='maildir','Maildir',maildir_format),':INDEX=/var/vmail-local/%d/%n/idx') as mail, uid, gid, CONCAT('*:storage=', quota, 'B') AS quota_rule, CONCAT(maildir, '/.sieve') as sieve FROM mail_user WHERE (login = '%u' OR email = '%u') AND `disable%Ls` = 'n' AND server_id = '20' --- Best regards,Dave

1 0

doveadm, userdb, and ssl=any-cert
by Felipe Gasper 15 Jan '21

15 Jan '21

Hello, We have a server that answers userdb queries for Dovecot. As of 2.3.11 we’re finding that if proxying fields like `ssl=any-cert` are in a userdb response for doveadm, then doveadm complains about not recognizing that field, e.g.: ----- doveadm(_mainaccount(a)xferme.tld): Error: User lookup failed: Invalid settings in userdb: Invalid userdb input 'ssl=any-cert': Invalid value: any-cert doveadm(_mainaccount(a)xferme.tld): Warning: Event 0x55a3f911b9c0 leaked (parent=(nil)): mail-storage-service.c:1335 ----- We can avoid sending this field in response when doveadm is the requesting service, but was this apparent change in 2.3.11 intended? Thank you! cheers, -Felipe Gasper

1 0

Authentication segfault with Dovecot 2.3.13
by Harald Leithner 14 Jan '21

14 Jan '21

Hi, we have a problem upgrading Dovecot from 2.2 to 2.3.13 on one server it seems one user triggers a segfault while trying to authenticate. The user works fine with 2.2.36.4, our last update try mid-late 2020 was aborted because of this reason. While debugging the problem we noticed that the "auth_debug_passwords = no" option doesn't work at least in our logfiles are the passwords logged. We replaced the password in the log with "THIS_SHOULD_NOT_GET_LOGGED" and the user part with "user@redacted". The user uses APOP for authentication, but other users login successfully with APOP. Here is a stacktrace and a log dump: Jan 6 16:29:44 mail kernel: auth[2208397]: segfault at ec ip 00007f67fc147174 sp 00007ffeed993150 error 4 in libdovecot.so.0.0.0[7f67fc06e000+fc000] Jan 6 16:29:44 mail kernel: Code: 1f 80 00 00 00 00 41 54 e8 79 fd ff ff 31 f6 49 89 c4 48 89 c7 31 c0 e8 ca f8 ff ff 4c 89 e0 41 5c c3 0f 1f 40 00 53 48 89 fb <f6> 87 ec 00 00 00 04 75 43 48 83 3d 7b aa 0a 00 00 0f 85 50 15 f4 Jan 6 16:29:44 mail systemd[1]: Started Process Core Dump (PID 2208677/UID 0). Jan 6 16:29:44 mail systemd-coredump[2208678]: Process 2208397 (auth) of user 489 dumped core.#012#012Stack trace of thread 2208397:#012#0 0x00007f67fc147174 event_create_passthrough (libdovecot.so.0 + 0x116174)#012#1 0x0000555678812d6e auth_request_finished_event (auth + 0x1bd6e)#012#2 0x00005556788159ae auth_request_log_finished (auth + 0x1e9ae)#012#3 0x0000555678816ee0 n/a (auth + 0x1fee0)#012#4 0x0000555678826dc1 passdb_handle_credentials (auth + 0x2fdc1)#012#5 0x0000555678816c7e n/a (auth + 0x1fc7e)#012#6 0x0000555678824f27 n/a (auth + 0x2df27)#012#7 0x000055567881b02d auth_request_handler_auth_begin (auth + 0x2402d)#012#8 0x000055567880dfaf n/a (auth + 0x16faf)#012#9 0x00007f67fc143a79 io_loop_call_io (libdovecot.so.0 + 0x112a79)#012#10 0x00007f67fc144ae2 io_loop_handler_run_internal (libdovecot.so.0 + 0x113ae2)#012#11 0x00007f67fc143b21 io_loop_handler_run (libdovecot.so.0 + 0x112b21)#012#12 0x00007f67fc143ce0 io_loop_run (libdovecot.so.0 + 0x112ce0)#012#13 0x00007f67fc0b96f3 master_service_run (libdovecot.so.0 + 0x886f3)#012#14 0x000055567880c2db main (auth + 0x152db)#012#15 0x00007f67fbc9d042 __libc_start_main (libc.so.6 + 0x27042)#012#16 0x000055567880c48e _start (auth + 0x1548e) Jan 6 16:29:44 mail dovecot[2208071]: auth: Debug: client in: AUTH#011134#011PLAIN#011service=imap#011session=tgog/jy4erm5j7ZO#011lip=lan-ip#011rip=client-ip#011lport=143#011rport=47482 Jan 6 16:29:44 mail dovecot[2208071]: auth: Debug: client passdb out: CONT#011134 Jan 6 16:29:44 mail dovecot[2208071]: auth: Debug: client in: CONT<hidden> Jan 6 16:29:44 mail dovecot[2208071]: auth: Debug: sql(user@redacted,client-ip,<tgog/jy4erm5j7ZO>): Performing passdb lookup Jan 6 16:29:44 mail dovecot[2208071]: auth: Debug: sql(user@redacted,client-ip,<tgog/jy4erm5j7ZO>): cache expired Jan 6 16:29:44 mail dovecot[2208071]: auth-worker(2208404): Debug: conn unix:auth-worker (pid=2208397,uid=489): auth-worker<229>: Handling PASSV request Jan 6 16:29:44 mail dovecot[2208071]: auth-worker(2208404): Debug: conn unix:auth-worker (pid=2208397,uid=489): auth-worker<229>: sql(user@redacted,client-ip,<tgog/jy4erm5j7ZO>): Performing passdb lookup Jan 6 16:29:44 mail dovecot[2208071]: auth-worker(2208404): Debug: conn unix:auth-worker (pid=2208397,uid=489): auth-worker<229>: sql(user@redacted,client-ip,<tgog/jy4erm5j7ZO>): query: SELECT passwd as password, '127.0.0.1' as host, userid as destuser, passwd AS pass, 'Y' AS nologin, 'Y' AS nodelay, 'Y' AS proxy FROM dbmail_users WHERE userid='user@redacted' UNION (SELECT password as password, '127.0.0.1' as host, username as destuser, password AS pass, 'Y' AS nologin, 'Y' AS nodelay, 'Y' AS proxy FROM sasl_fake_auth WHERE username='user@redacted') limit 1; Jan 6 16:29:44 mail dovecot[2208071]: auth-worker(2208404): conn unix:auth-worker (pid=2208397,uid=489): auth-worker<229>: sql(user@redacted,client-ip,<tgog/jy4erm5j7ZO>): Password mismatch Jan 6 16:29:44 mail dovecot[2208071]: auth-worker(2208404): Debug: conn unix:auth-worker (pid=2208397,uid=489): auth-worker<229>: sql(user@redacted,client-ip,<tgog/jy4erm5j7ZO>): Finished passdb lookup Jan 6 16:29:44 mail dovecot[2208071]: auth-worker(2208404): Debug: conn unix:auth-worker (pid=2208397,uid=489): auth-worker<229>: Finished Jan 6 16:29:44 mail dovecot[2208071]: auth: Debug: sql(user@redacted,client-ip,<tgog/jy4erm5j7ZO>): Finished passdb lookup Jan 6 16:29:44 mail dovecot[2208071]: auth: Debug: auth(user@redacted,client-ip,<tgog/jy4erm5j7ZO>): Auth request finished Jan 6 16:29:44 mail dovecot[2208071]: auth: Debug: client in: AUTH#011443#011APOP#011service=pop3#011secured=tls#011session=n58h/jy4a0i5j7ZO#011lip=lan-ip#011rip=client-ip#011lport=995#011rport=18539#011local_name=mail#011resp=<hidden> Jan 6 16:29:44 mail dovecot[2208071]: auth: Debug: sql(user@redacted,client-ip,<n58h/jy4a0i5j7ZO>): Performing passdb lookup Jan 6 16:29:44 mail dovecot[2208071]: auth: Debug: sql(user@redacted,client-ip,<n58h/jy4a0i5j7ZO>): cache hit: <hidden>#011host=127.0.0.1#011destuser=user@redacted#011pass=THIS_SHOULD_NOT_GET_LOGGED#011nologin=Y#011nodelay=Y#011proxy=Y Jan 6 16:29:44 mail dovecot[2208071]: auth: Debug: sql(user@redacted,client-ip,<n58h/jy4a0i5j7ZO>): Finished passdb lookup Jan 6 16:29:44 mail dovecot[2208071]: auth: Debug: auth(user@redacted,client-ip,<n58h/jy4a0i5j7ZO>): Auth request finished Jan 6 16:29:44 mail dovecot[2208071]: auth: Debug: client passdb out: FAIL#011443#011user=user@redacted#011nodelay#011pass=<hidden>#011nodelay=Y Jan 6 16:29:44 mail dovecot[2208071]: pop3-login: Debug: Ignoring unknown passdb extra field: nodelay Jan 6 16:29:44 mail dovecot[2208071]: pop3-login: Debug: Ignoring unknown passdb extra field: nodelay Jan 6 16:29:44 mail dovecot[2208071]: pop3-login: Disconnected (auth failed, 1 attempts in 0 secs): user=<user@redacted>, client-ip, APOP, TLS, TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) Jan 6 16:29:44 mail dovecot[2208071]: auth-worker(2208404): Debug: conn unix:auth-worker (pid=2208397,uid=489): Disconnected: Connection closed (fd=-1) Jan 6 16:29:44 mail dovecot[2208071]: auth: Fatal: master: service(auth): child 2208397 killed with signal 11 (core dumped)h-worker<1>: Handling PASSV request Jan 6 16:20:05 mail dovecot[2208071]: auth: Debug: client in: AUTH#01179#011PLAIN#011service=imap#011session=QY6V2zy4FUm5j7YD#011lip=lan-ip#011rip=client-ip#011lport=143#011rport=18709 Jan 6 16:20:05 mail dovecot[2208071]: auth: Debug: client passdb out: CONT#01179 Jan 6 16:20:05 mail dovecot[2208071]: auth: Debug: client in: CONT<hidden> Jan 6 16:20:05 mail dovecot[2208071]: auth: Debug: sql(user@redacted,client-ip,<QY6V2zy4FUm5j7YD>): Performing passdb lookup Jan 6 16:20:05 mail dovecot[2208071]: auth: Debug: sql(user@redacted,client-ip,<QY6V2zy4FUm5j7YD>): cache expired Jan 6 16:20:05 mail dovecot[2208071]: auth-worker(2208083): Debug: conn unix:auth-worker (pid=2208074,uid=489): auth-worker<235>: Handling PASSV request Jan 6 16:20:05 mail dovecot[2208071]: auth-worker(2208083): Debug: conn unix:auth-worker (pid=2208074,uid=489): auth-worker<235>: sql(user@redacted,client-ip,<QY6V2zy4FUm5j7YD>): Performing passdb lookup Jan 6 16:20:05 mail dovecot[2208071]: auth-worker(2208083): Debug: conn unix:auth-worker (pid=2208074,uid=489): auth-worker<235>: sql(user@redacted,client-ip,<QY6V2zy4FUm5j7YD>): query: SELECT passwd as password, '127.0.0.1' as host, userid as destuser, passwd AS pass, 'Y' AS nologin, 'Y' AS nodelay, 'Y' AS proxy FROM dbmail_users WHERE userid='user@redacted' UNION (SELECT password as password, '127.0.0.1' as host, username as destuser, password AS pass, 'Y' AS nologin, 'Y' AS nodelay, 'Y' AS proxy FROM sasl_fake_auth WHERE username='user@redacted') limit 1; Jan 6 16:20:05 mail dovecot[2208071]: auth-worker(2208083): conn unix:auth-worker (pid=2208074,uid=489): auth-worker<235>: sql(user@redacted,client-ip,<QY6V2zy4FUm5j7YD>): Password mismatch Jan 6 16:20:05 mail dovecot[2208071]: auth-worker(2208083): Debug: conn unix:auth-worker (pid=2208074,uid=489): auth-worker<235>: sql(user@redacted,client-ip,<QY6V2zy4FUm5j7YD>): Finished passdb lookup Jan 6 16:20:05 mail dovecot[2208071]: auth-worker(2208083): Debug: conn unix:auth-worker (pid=2208074,uid=489): auth-worker<235>: Finished Jan 6 16:20:05 mail dovecot[2208071]: auth: Debug: sql(user@redacted,client-ip,<QY6V2zy4FUm5j7YD>): Finished passdb lookup Jan 6 16:20:05 mail dovecot[2208071]: auth: Debug: auth(user@redacted,client-ip,<QY6V2zy4FUm5j7YD>): Auth request finished Jan 6 16:20:05 mail dovecot[2208071]: auth: Debug: client in: AUTH#011215#011APOP#011service=pop3#011secured=tls#011session=ZJWX2zy4VzO5j7YD#011lip=lan-ip#011rip=client-ip#011lport=995#011rport=13143#011local_name=mail#011resp=<hidden> Jan 6 16:20:05 mail dovecot[2208071]: auth: Debug: sql(user@redacted,client-ip,<ZJWX2zy4VzO5j7YD>): Performing passdb lookup Jan 6 16:20:05 mail dovecot[2208071]: auth: Debug: sql(user@redacted,client-ip,<ZJWX2zy4VzO5j7YD>): cache hit: <hidden>#011host=127.0.0.1#011destuser=user@redacted#011pass=THIS_SHOULD_NOT_GET_LOGGED#011nologin=Y#011nodelay=Y#011proxy=Y Jan 6 16:20:05 mail dovecot[2208071]: auth: Debug: sql(user@redacted,client-ip,<ZJWX2zy4VzO5j7YD>): Finished passdb lookup Jan 6 16:20:05 mail dovecot[2208071]: auth: Debug: auth(user@redacted,client-ip,<ZJWX2zy4VzO5j7YD>): Auth request finished Jan 6 16:20:05 mail dovecot[2208071]: auth: Debug: client passdb out: FAIL#011215#011user=user@redacted#011nodelay#011pass=<hidden>#011nodelay=Y Jan 6 16:20:05 mail dovecot[2208071]: pop3-login: Debug: Ignoring unknown passdb extra field: nodelay Jan 6 16:20:05 mail dovecot[2208071]: pop3-login: Debug: Ignoring unknown passdb extra field: nodelay Jan 6 16:20:05 mail dovecot[2208071]: pop3-login: Disconnected (auth failed, 1 attempts in 0 secs): user=<user@redacted>, client-ip, APOP, TLS, TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) Jan 6 16:20:05 mail dovecot[2208071]: auth-worker(2208083): Debug: conn unix:auth-worker (pid=2208074,uid=489): Disconnected: Connection closed (fd=-1) Jan 6 16:20:05 mail dovecot[2208071]: auth: Fatal: master: service(auth): child 2208074 killed with signal 11 (core dumped) Jan 6 16:20:20 mail dovecot[2208071]: auth: Debug: client in: AUTH#011218#011APOP#011service=pop3#011secured=tls#011session=wXyB3Dy4W0i5j7YD#011lip=lan-ip#011rip=client-ip#011lport=995#011rport=18523#011local_name=mail#011resp=<hidden> Jan 6 16:20:20 mail dovecot[2208071]: auth: Debug: sql(user@redacted,client-ip,<wXyB3Dy4W0i5j7YD>): Performing passdb lookup Jan 6 16:20:20 mail dovecot[2208071]: auth: Debug: sql(user@redacted,client-ip,<wXyB3Dy4W0i5j7YD>): cache hit: <hidden>#011host=127.0.0.1#011destuser=user@redacted#011pass=THIS_SHOULD_NOT_GET_LOGGED#011nologin=Y#011nodelay=Y#011proxy=Y Jan 6 16:20:20 mail dovecot[2208071]: auth: Debug: sql(user@redacted,client-ip,<wXyB3Dy4W0i5j7YD>): Finished passdb lookup Jan 6 16:20:20 mail dovecot[2208071]: auth: Debug: auth(user@redacted,client-ip,<wXyB3Dy4W0i5j7YD>): Auth request finished Jan 6 16:20:20 mail dovecot[2208071]: auth: Debug: client passdb out: FAIL#011218#011user=user@redacted#011nodelay#011pass=<hidden>#011nodelay=Y Jan 6 16:20:20 mail dovecot[2208071]: pop3-login: Debug: Ignoring unknown passdb extra field: nodelay Jan 6 16:20:20 mail dovecot[2208071]: pop3-login: Debug: Ignoring unknown passdb extra field: nodelay Jan 6 16:20:20 mail dovecot[2208071]: pop3-login: Disconnected (auth failed, 1 attempts in 0 secs): user=<user@redacted>, client-ip, APOP, TLS, TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) Jan 6 16:20:20 mail dovecot[2208071]: auth-worker(2208392): Debug: conn unix:auth-worker (pid=2208385,uid=489): Disconnected: Connection closed (fd=-1) Jan 6 16:20:20 mail dovecot[2208071]: auth: Fatal: master: service(auth): child 2208385 killed with signal 11 (core dumped) Any help is appreciated thanks Harald -- ITronic Harald Leithner Wiedner Hauptstraße 120/5.1, 1050 Wien, Austria Tel: +43-1-545 0 604 Mobil: +43-699-123 78 4 78 Mail: leithner(a)itronic.at | itronic.at

4 10

Dovecot v2.3.13 released
by Aki Tuomi 13 Jan '21

13 Jan '21

We are pleased to release v2.3.13. Please find it from locations below: https://dovecot.org/releases/2.3/dovecot-2.3.13.tar.gz https://dovecot.org/releases/2.3/dovecot-2.3.13.tar.gz.sig Binary packages in https://repo.dovecot.org/ Docker images in https://hub.docker.com/r/dovecot/dovecot Aki Tuomi Open-Xchange oy --- * CVE-2020-24386: Specially crafted command can cause IMAP hibernate to allow logged in user to access other people's emails and filesystem information. * Metric filter and global event filter variable syntax changed to a SQL-like format. See https://doc.dovecot.org/configuration_manual/event_filter/ * auth: Added new aliases for %{variables}. Usage of the old ones is possible, but discouraged. * auth: Removed RPA auth mechanism, SKEY auth mechanism, NTLM auth mechanism and related password schemes. * auth: Removed passdb-sia, passdb-vpopmail and userdb-vpopmail. * auth: Removed postfix postmap socket + auth: Added new fields for auth server events. These fields are now also available for all auth events. See https://doc.dovecot.org/admin_manual/list_of_events/#authentication-server for details. + imap-hibernate: Added imap_client_hibernated, imap_client_unhibernated and imap_client_unhibernate_retried events. See https://doc.dovecot.org/admin_manual/list_of_events/ for details. + lib-index: Added new mail_index_recreated event. See https://doc.dovecot.org/admin_manual/list_of_events/#mail-index-recreated + lib-sql: Support TLS options for cassandra driver. This requires cpp-driver v2.15 (or later) to work reliably. + lib-storage: Missing $HasAttachment / $HasNoAttachment flags are now added to existing mails if mail_attachment_detection_option=add-flags and it can be done inexpensively. + login proxy: Added login_proxy_max_reconnects setting (default 3) to control how many reconnections are attempted. + login proxy: imap/pop3/submission/managesieve proxying now supports reconnection retrying on more than just connect() failure. Any error except a non-temporary authentication failure will result in reconnect attempts. - auth: Lua passdb/userdb leaks stack elements per call, eventually causing the stack to become too deep and crashing the auth or auth-worker process. - auth: SASL authentication PLAIN mechanism could be used to trigger read buffer overflow. However, this doesn't seem to be exploitable in any way. - auth: v2.3.11 regression: GSSAPI authentication fails because dovecot disallows NUL bytes for it. - dict: Process used too much CPU when iterating keys, because each key used a separate write() syscall. - doveadm-server: Crash could occur if logging was done outside command handling. For example http-client could have done debug logging afterwards, resulting in either segfault or Panic: file http-client.c: line 642 (http_client_context_close): assertion failed: (cctx->clients_list == NULL). - doveadm-server: v2.3.11 regression: Trying to connect to doveadm server process via starttls assert-crashed if there were no ssl=yes listeners: Panic: file master-service-ssl.c: line 22 (master_service_ssl_init): assertion failed: (service->ssl_ctx_initialized). - fts-solr: HTTP requests may have assert-crashed: Panic: file http-client-request.c: line 1232 (http_client_request_send_more): assertion failed: (req->payload_input != NULL) - imap: IMAP NOTIFY could crash with a segmentation fault due to a bad configuration that causes errors. Sending the error responses to the client can cause the segmentation fault. This can for example happen when several namespaces use the same mail storage location. - imap: IMAP NOTIFY used on a shared namespace that doesn't actually exist (e.g. public namespace for a nonexistent user) can crash with a panic: Panic: Leaked view for index /tmp/home/asdf/mdbox/dovecot.list.index: Opened in (null):0 - imap: IMAP session can crash with QRESYNC extension if many changes are done before asking for expunged mails since last sync. - imap: Process might hang indefinitely if client disconnects after sending some long-running commands pipelined, for example FETCH+LOGOUT. - lib-compress: Mitigate crashes when configuring a not compiled in compression. Errors with compression configuration now distinguish between not supported and unknown. - lib-compression: Using xz/lzma compression in v2.3.11 could have written truncated output in some situations. This would result in "Broken pipe" read errors when trying to read it back. - lib-compression: zstd compression could have crashed in some situations: Panic: file ostream.c: line 287 (o_stream_sendv_int): assertion failed: (!stream->blocking) - lib-dict: dict client could have crashed in some rare situations when iterating keys. - lib-http: Fix several assert-crashes in HTTP client. - lib-index: v2.3.11 regression: When mails were expunged at the same time as lots of new content was being saved to the cache (e.g. cache file was lost and is being re-filled) a deadlock could occur with dovecot.index.cache / dovecot.index.log. - lib-index: v2.3.11 regression: dovecot.index.cache file was being purged (rewritten) too often when it had a field that hadn't been accessed for over 1 month, but less than 2 months. Every cache file change caused a purging in this situation. - lib-mail: MIME parts were not returned correctly by Dovecot MIME parser. Regression caused by fixing CVE-2020-12100. - lib-mail: When max nested MIME parts were reached, IMAP BODYSTRUCTURE was written in a way that may have caused confusion for both IMAP clients and Dovecot itself when parsing it. The truncated part is now written out using application/octet-stream MIME type. - lib-mail: v2.3.11 regression: Mail delivery / parsing crashed when the 10000th MIME part was message/rfc822 (or if parent was multipart/digest): Panic: file message-parser.c: line 167 (message_part_append): assertion failed: (ctx->total_parts_count <= ctx->max_total_mime_parts). - lib-oauth2: Dovecot incorrectly required oauth2 server introspection reply to contain username with invalid token. - lib-ssl-iostream, lib-dcrypt: Fix building with OpenSSL that has deprecated APIs disabled. - lib-storage: When mail's size is different from the cached one (in dovecot.index.cache or Maildir S=size in the filename), this is handled by logging "Cached message size smaller/larger than expected" error. However, in some situations this also ended up crashing with: Panic: file istream.c: line 315 (i_stream_read_memarea): assertion failed: (old_size <= _stream->pos - _stream->skip). - lib-storage: v2.3 regression: Copying/moving mails was taking much more memory than before. This was mainly visible when copying/moving thousands of mails in a single transaction. - lib-storage: v2.3.11 regression: Searching messages assert-crashed (without FTS): Panic: file message-parser.c: line 174 (message_part_finish): assertion failed: (ctx->nested_parts_count > 0). - lib: Dovecot v2.3 moved signal handlers around in ioloops, causing more CPU usage than in v2.2. - lib: Fixed JSON parsing: '\' escape sequence may have wrongly resulted in error if it happened to be at read boundary. Any NUL characters and '\u0000' will now result in parsing error instead of silently truncating the data. - lmtp, submission: Server may hang if SSL client connection disconnects during the delivery. If this happened repeated, it could have ended up reaching process_limit and preventing any further lmtp/submission deliveries. - lmtp: Proxy does not always properly log TLS connection problems as errors; in some cases, only a debug message is logged if enabled. - lmtp: The LMTP service can hang when commands are pipelined. This can particularly occur when one command in the middle of the pipeline fails. One example of this occurs for proxied LMTP transactions in which the final DATA or BDAT command is pipelined after a failing RCPT command. - login-proxy: The login_source_ips setting has no effect, and therefore the proxy source IPs are not cycled through as they should be. - master: Process was using 100% CPU in some situations when a broken service was being throttled. - pop3-login: POP3 login would fail with "Input buffer full" if the initial response for SASL was too long. - stats: Crash would occur when generating openmetrics data for metrics using aggregating functions.

5 6

migration with doveadm backup to new cluster running dovecot 2.2.36 and replicator
by Thomas Winterstein 12 Jan '21

12 Jan '21

Hello everyone, we are working on migrating from dovecot 2.0.9 (maildir) to 2.2.36 (mdbox). The new cluster has two backend mail servers which replicate through doveadm replicator. To move the data initially we use doveadm backup (imapc). Our migration command doveadm -o mail_fsync=never backup -R -u $user imapc: To test the replication of new and purge of old mails with live data changes we ran imapc on a daily basis but encountered the problem that some mailboxes multiplied in size. We then made sure that imapc and replication don't run at the same time but after the first incremental imapc process, we still had the same problems. The doveadm-backup man-page states that it's possible to run it multiple times during migration. But is it also possible to have the replicator running in between? From our understanding the doveadm backup should just work as an imap connection between the servers, synchronizing all changes made on the source to the destination. Or does the conversion from maildir to mdbox format in our case produce the problems? If you're not supposed to run the replicator before having fully migrated, how can we shorten the downtime? rsync? And how can we be sure that similar problems don't occur after the migration if we can't test all mechanisms together with live data? thanks -- Thomas Winterstein

3 7

Dovecot FST not using plugins
by Joan Moreau 12 Jan '21

12 Jan '21

Hello, With recent git version of dovecot, I can see that the FTS does not use the configured plugin anymore, but tries to sort the mailbox directly on the spot (which is of course very painful). Is there a change in the configuration file in order to recover the old behavior ? or something else has changed ? Thank you Joan

2 2

Remap login before authentication
by Miloslav Hůla 11 Jan '21

11 Jan '21

Hi, with Dovecot 2.3.4 I would like to allow user to login with two different usernames: - USERNAME (no domain) - now works - name.surname(a)domain.tld - would like to add Problem is, that the only authentication method I have is LDAP bind by USERNAME. Now I use: ============ passdb { driver = ldap args = /etc/dovecot/dovecot-ldap.conf.ext } # Args uris = ldaps://ldap.domain.tld auth_bind = yes auth_bind_userdn = uid=%u,dc=domain,dc=tld base = ============ I know passdb can remap user&domain, but I have no password hash at all. And for example '{SASL}' is not supported password scheme to return e.g. from SQL passdb. Is there any way how to achive this? Maybe somehow remap username in first passdb and then continue to LDAP bind? 1. login as name.surname(a)domain.tld 2. remap to USERNAME 3. do the LDAP bind Milo

2 5

Re: status of test code
by steve＠keptprivate.com 11 Jan '21

11 Jan '21

Update:I was finally able to build 2.3.13 on centos 8 (8.3). I managed this by going back to the qmailtoaster spec file, removing a few things no longer relevant (vpopmail) and disabling all the tests. Most tests were still running but there were also many that did not. The good news is the resulting executable in the RPM no longer complains about not being able to find libdovecot.so. i've done some basic testing on imap and everything appears to be working.Someone who maintains the tests and rpm build should really have a look. Doing a build on a fresh centos 8 machine, as I was able to with the qmailtoaster source rpm, should really be much simpler. My impression is the current spec file may have edits that were eroneously committed? SteveSent from my T-Mobile 4G LTE device------ Original message------From: steve(a)keptprivate.comDate: Sat, Jan 9, 2021 3:42 PMTo: dovecot(a)dovecot.org;Cc: Subject:status of test codeHi, I'm continuing to try to build 2.3.13 with a source RPM. At this point I've taken the source zip file and I'm working with the previously working qmailtoaster SPEC file and RPM build process. The toaster SPEC file runs the built-in dovecot tests after build... 2.3.11 would make it through all the tests with a few minor exceptions. 2.3.13 seems no longer able to run the test is lib-ssl-iostream or lib-lua (and perhaps others, but that's as far as I've gotten). I can selectively disable the tests to make progress, but it raises the question of what the plans are for the built-in tests. Also, I continue to not be able to find where all the testing is turned on/off at once? I'm sure it will be obvious when someone tells me but please tell me, because I'm pulling my hair out. Steve

2 1

lzma mdboxes with unexpected EOF
by Bjoern Franke 10 Jan '21

10 Jan '21

Hi, I'm running dovecot 2.3.13 (until 05.01. it was 2.3.11.3) on Arch Linux and used lzma compressed mdboxes. Yesterday a user called me that she is missing all mails from the beginning of the month until now. I took a look into the logs and saw several "lzma.read [...] unexpected EOF at <....>". As I had no clue why the mdboxes are broken, I tried to convert all 3 mailboxes to Maildir using "doveadm sync" to prevent further issues and stumbled upon several lzma errors for mdbox files of my own user. So I wrote a script which took the offset and size via "doveadm dump" und then dds the xz parts out of the broken mdboxes and extracts them via 7z. But I'm wondering why that happened at all. I stumpled upon [1] but there was no further discussion about it. Best Regards Bjoern [1]https://dovecot.org/pipermail/dovecot/2019-September/117007.html

1 1

auth error log format change
by Adrian Minta 10 Jan '21

10 Jan '21

Hi, we recently upgraded to 2.3.13 from 2.3.11 and the log format for auth errors seems to have change. This change may have an adverse effect on fail2ban rules. Is there a way to revert to old format ? Thank you ! Old log example: Jan 10 00:32:37 mail dovecot: auth-worker(50806): sql(name(a)domain,112.18.92.0.104,<Dg/+P3+49cMFt1xo>): Password mismatch Jan 10 03:20:02 mail dovecot: auth-worker(26057): sql(name(a)domain,112.18.92.0.104,<oMyxloG4M7AFt1xo>): Password mismatch New log example: Jan 10 00:32:37 mail dovecot: auth-worker(50806): conn unix:auth-worker (pid=22503,uid=0): auth-worker<585236>: sql(name(a)domain,112.18.92.0.104,<Dg/+P3+49cMFt1xo>): Password mismatch Jan 10 03:20:02 mail dovecot: auth-worker(26057): conn unix:auth-worker (pid=25928,uid=0): auth-worker<4234337>: sql(name(a)domain,112.18.92.0.104,<oMyxloG4M7AFt1xo>): Password mismatch -- Best regards, Adrian Minta

1 0

problem building on centos 8 (8.3 kernel)
by steve＠keptprivate.com 09 Jan '21

09 Jan '21

Hi, I'm converting from qmailtoaster/vpopmail build. When I try to build dovecot-2.3.13-2.src.rpm for centos 8.3 the first thing I run into is this: + sed -i 's|/etc/ssl|/etc/pki/dovecot|' doc/mkcert.sh doc/example-config/conf.d/10-ssl.conf + '[' -e buildinfo.commit ']' ++ head -1 buildinfo.commit + COMMIT=89f716dc2ec7362864a368d32533184b55fb7831 ++ /bin/sh /home/build/rpmbuild/SOURCES/lsb_release -is /bin/sh: /home/build/rpmbuild/SOURCES/lsb_release: No such file or directory + ID= error: Bad exit status from /var/tmp/rpm-tmp.WFaLYQ (%build) RPM build errors: Macro expanded in comment on line 455: %{_libdir}/dovecot/settings Bad exit status from /var/tmp/rpm-tmp.WFaLYQ (%build) I can get past this with an edit to the dovecot.spec file (removing sourcedir): if [ -e "buildinfo.commit" ]; then COMMIT=`head -1 buildinfo.commit` ID=`/bin/sh %̶{̶_̶s̶o̶u̶r̶c̶e̶d̶i̶r̶}̶/̶lsb_release -is` RELEASE=`/bin/sh %̶{̶_̶s̶o̶u̶r̶c̶e̶d̶i̶r̶}̶/̶lsb_release -rs` CODENAME=`/bin/sh %̶{̶_̶s̶o̶u̶r̶c̶e̶d̶i̶r̶}̶/̶lsb_release -cs` ARCH=`arch` fi The RPM builds but it fails to run with this message in the logs: Jan 6 20:52:11 beta1 systemd[1]: Starting Dovecot IMAP/POP3 email server... Jan 6 20:52:11 beta1 systemd[1]: Started Dovecot IMAP/POP3 email server. Jan 6 20:52:11 beta1 dovecot[356909]: /usr/sbin/dovecot: error while loading shared libraries: libdovecot.so.0: cannot open shared object file: No such file or directory Jan 6 20:52:11 beta1 systemd[1]: dovecot.service: Main process exited, code=exited, status=127/n/a Jan 6 20:52:11 beta1 systemd[1]: dovecot.service: Failed with result 'exit-code'. Any ideas what I have going wrong? Also, a side question, when I build the rpm it's not running the extensive tests that the old qmailtoaster source rpm used to run. I've looked through the spec file and I don't really see where to turn that back on. Sorry if any of this is stupid, but I'm new to building directly from the dovecot repo. Steve

3 3

Dovecot 2.3.13 source rpm build fails on Centos 8
by steve＠keptprivate.com 08 Jan '21

08 Jan '21

I tried to post this in a more nuanced way, but the fact is the latest source RPM does not build on the latest Centos 8.> + sed -i 's|/etc/ssl|/etc/pki/dovecot|' doc/mkcert.sh doc/example-config/conf.d/10-ssl.conf > + '[' -e buildinfo.commit ']' > ++ head -1 buildinfo.commit > + COMMIT=89f716dc2ec7362864a368d32533184b55fb7831 > ++ /bin/sh /home/build/rpmbuild/SOURCES/lsb_release -is > /bin/sh: /home/build/rpmbuild/SOURCES/lsb_release: No such file or directory > + ID= > error: Bad exit status from /var/tmp/rpm-tmp.WFaLYQ (%build) > > > RPM build errors: > Macro expanded in comment on line 455: %{_libdir}/dovecot/settings > > Bad exit status from /var/tmp/rpm-tmp.WFaLYQ (%build) > > I can get past this with an edit to the dovecot.spec file (removing sourcedir): > > if [ -e "buildinfo.commit" ]; then > COMMIT=`head -1 buildinfo.commit` > ID=`/bin/sh %̶{̶_̶s̶o̶u̶r̶c̶e̶d̶i̶r̶}̶/̶lsb_release -is` > RELEASE=`/bin/sh %̶{̶_̶s̶o̶u̶r̶c̶e̶d̶i̶r̶}̶/̶lsb_release -rs` > CODENAME=`/bin/sh %̶{̶_̶s̶o̶u̶r̶c̶e̶d̶i̶r̶}̶/̶lsb_release -cs` > ARCH=`arch` > fiCan someone who knows the source rpm build config. please respond?The committed spec file contains errors.ThanksSent from my T-Mobile 4G LTE device

3 6

2.3.13: newly introduced TLS bug : tls_construct_server_key_exchange
by Marius Schwarz 08 Jan '21

08 Jan '21

Hi, since the update from 2.3.11 to 2.3.13 some clients generate this bug : TLS handshaking: SSL_accept() failed: error:141EC044:SSL routines:tls_construct_server_key_exchange:internal error As it looks for now, they use the old SSL approach on Ports 993 and 995. SSL Config says: ssl = yes ssl_cert = </etc/pki/tls/certs/exim.pem ( Lets Encrypt R3 based cert ) ssl_key = </etc/pki/tls/private/exim.pem ssl_dh_parameters_length = 2048 ssl_dh= </etc/dovecot/dh.pem ssl_cipher_list = PROFILE=SYSTEM OS: Fedora 32 X86_64 Ext4 file storage on local disks Versions: dovecot-2.3.13-1.fc32.x86_64 openssl-1.1.1i-1.fc32.x86_64 best regards, Marius Schwarz

2 2

Re: problem building on centos 8 (8.3 kernel)
by steve＠keptprivate.com 07 Jan '21

07 Jan '21

Another thought... Could I use a different build mechanism that would result in the same installation rpm? There's no reason I have to use source rpms, I'm just used to it because of qmailtoaster.SteveSent from my T-Mobile 4G LTE device------ Original message------From: steve(a)keptprivate.comDate: Thu, Jan 7, 2021 3:48 PMTo: Aki Tuomi;dovecot(a)dovecot.org;Cc: Subject:Re: problem building on centos 8 (8.3 kernel) Any ideas about the lsb_release error in the spec file and where that came from? I have a very vanilla centos 8 install I'm trying to bulid on. Any thoughts appreciated because I'm stuck and at something of a loss on what to try next. My first thought is to look at spec file revisions.SteveSent from my T-Mobile 4G LTE device------ Original message------From: Aki TuomiDate: Thu, Jan 7, 2021 3:10 AMTo: steve@keptprivate.com;dovecot@dovecot.org;Cc: Subject:Re: problem building on centos 8 (8.3 kernel)> On 07/01/2021 03:57 steve(a)keptprivate.com wrote: > > > Hi, > > I'm converting from qmailtoaster/vpopmail build. > When I try to build dovecot-2.3.13-2.src.rpm for centos 8.3 the first thing I run into is this: > > + sed -i 's|/etc/ssl|/etc/pki/dovecot|' doc/mkcert.sh doc/example-config/conf.d/10-ssl.conf > + '[' -e buildinfo.commit ']' > ++ head -1 buildinfo.commit > + COMMIT=89f716dc2ec7362864a368d32533184b55fb7831 > ++ /bin/sh /home/build/rpmbuild/SOURCES/lsb_release -is > /bin/sh: /home/build/rpmbuild/SOURCES/lsb_release: No such file or directory > + ID= > error: Bad exit status from /var/tmp/rpm-tmp.WFaLYQ (%build) > > > RPM build errors: > Macro expanded in comment on line 455: %{_libdir}/dovecot/settings > > Bad exit status from /var/tmp/rpm-tmp.WFaLYQ (%build) > > I can get past this with an edit to the dovecot.spec file (removing sourcedir): > > if [ -e "buildinfo.commit" ]; then > COMMIT=`head -1 buildinfo.commit` > ID=`/bin/sh %̶{̶_̶s̶o̶u̶r̶c̶e̶d̶i̶r̶}̶/̶lsb_release -is` > RELEASE=`/bin/sh %̶{̶_̶s̶o̶u̶r̶c̶e̶d̶i̶r̶}̶/̶lsb_release -rs` > CODENAME=`/bin/sh %̶{̶_̶s̶o̶u̶r̶c̶e̶d̶i̶r̶}̶/̶lsb_release -cs` > ARCH=`arch` > fi > > The RPM builds but it fails to run with this message in the logs: > > Jan 6 20:52:11 beta1 systemd[1]: Starting Dovecot IMAP/POP3 email server... > Jan 6 20:52:11 beta1 systemd[1]: Started Dovecot IMAP/POP3 email server. > Jan 6 20:52:11 beta1 dovecot[356909]: /usr/sbin/dovecot: error while loading shared libraries: libdovecot.so.0: cannot open shared object > file: No such file or directory > Jan 6 20:52:11 beta1 systemd[1]: dovecot.service: Main process exited, code=exited, status=127/n/a > Jan 6 20:52:11 beta1 systemd[1]: dovecot.service: Failed with result 'exit-code'. > > Any ideas what I have going wrong? > > Also, a side question, when I build the rpm it's not running the extensive tests that the old qmailtoaster source rpm used to run. I've > looked through the spec file and I don't really see where to turn that back on. > > Sorry if any of this is stupid, but I'm new to building directly from the dovecot repo. > > Steve I think the file is installed under /usr/lib64/, so check ldd /usr/lib64/libdovecot.so.0 Is there some reason you are building the rpms yourself? Aki

1 0