October 2012 - dovecot

[Dovecot] Irrelevant information filling logs
by 3.listas＠adminlinux.com.br 11 Oct '12

11 Oct '12

Hi, I have a "Ubuntu10.04 + dovecot-2.0.13" configuration in my server. My mailbox server is shared by ~ 10k domains. It works fine with ~50k accounts. There is a lot of logs of "quota exceeded" like this: Oct 10 13:00:56 mailboxserver5 dovecot: lmtp(29105, user@mailboxserver5): Error: ifcIN1NxdVCxcQAAMBx7mQ: sieve: msgid=unspecified: failed to store into mailbox 'INBOX': Quota exceeded (mailbox for user is full) These messages are not important to me. But these messages fill the log files, damaging the display of messages that could be important. Is there a way to send specific Dovecot errors on specific files or just discard them? Thanks -- Thiago Henrique adminlinux.com.br

6 5

[Dovecot] some questions on AOX or rather a mail system setup
by Christoph Anton Mitterer 11 Oct '12

11 Oct '12

Hi folks. Perhaps you find some time to look into this,... I'm trying to plan my mail system and would have some questions. The overall idea is about the following: - There is a (internet) server, which is the MTA (which will be postfix) and imap and/or pop3 server (which shall be, guess, dovecot ... AOX comes in later). - Any spam filtering, virus-scanning, mail filtering happens on that server. - I have not yet decided on whether to use maildrop for this or Sieve. Maildrop is nice, but has one major deficiency which I don't know how to work around. - A few clients (that means I won't serve 100 of users) connect to that server via imap and should see all mails, etc. already in some fancy sorted hierarchy (that means filtered into different directories). So far nothing complicated. But now... - Apart from spam, I never delete mail; and because I'm subscribed to many lists, I get a lot of mail. - Storage on my server is limited and it's located somewhere at my ISP, so I generally do not trust it with respect to safety... For both reasons, I want the canonical archive of all mail to be at home at some local server. - The local server should also be an imap server, so that I can access the archive from may computers at home. - The local server won't be available from the internet. - The local archive should have the same folder hierarchy as the internet server (I'd prefer not to filter twice). - The local archive might be AOX... Mail Flow: - I generally want to have _all_ mail (which is not sorted out because of being spam) to be archived at the local server. - But(!) I want to selectively keep (in addition) mail at the internet server. For example I may want to select the folder that contains all mail form some friend to be kept online completely. But I may want to decide that mailinglists keep only the last 10 days and/or 1000 messages of mail. - The idea is, that the local server regularly (when it is online/running) catches new mail from the internet server... and stores it in the archive. - So apart from new mail that has not yet been read, that local archive contains always all mails that are also on the internet server... the later may contain (for specific directories) the same, or just parts of. - The MUAs will then have two imap accounts, one to the internet server and one to the local archive,... each one being usable, depending on where I am. 1) This is where my first problem arises: How can I implement that mail flow, especially: - How do I secure that all mail is read from the internet server (i.e. that nothing is "forgotten"? - How do I make sure that no mails are retrieved twice (or more)? A problem which I often had with pop, when the mail client crashed during sync? - Further it must be secured, that when I delete something on the internet server, it is NOT deleted on the local server (on the next mail-fetching).... this is why I don't use the word "sync". a) One stupid solution would be, that I duplicate all mail on the online server,... one part is for staying online, one part is for being fetched to the local archive. As soon as it was fetched... that copy gets removed (always). That solution would give a clean and secured separation of both? b) I don't think offlineimap or any other caching-like solution is the right thing... especially as one must always fear that such a cache may be accidentally wiped. Are there better solutions than (a)? 2) Problem would be already a refinement of a working solution for (1) (but obviously not when using (1).(a) ). When e.g. reply to or forward a mail using the online server,... and that mail had already been fetched,... can I make the flag synced? 3) Is AOX suitable for the local server? - I couldn't use maildir locally, because I loose just to much space to the block fragmentation. But I guess I won't have this problem with the DB backend. a) Is AOX able to manage a really big folder hierarchy that basically ever keeps growing... with easily several 100k mails per folder... and that is in total already over 100GB? I read that e.g. dovecot would have more performance problems with that. b) I would prefer to have fast full text search. Does AOX provide this? I read that IMAP has limitations which make full text search not really usable via it? Further, I remember some dovecot wiki page that showed a comparison which said that both do not perfectly implement imap. Thanks a lot, Chris.

3 5

[Dovecot] iterate_query does not use userdb - mail_location not found
by dovecot＠freakout.de 11 Oct '12

11 Oct '12

Hi dovecot-comminity, can't get iterate_query working. doveadm cannot find mail_location which comes from userdb query. dovecot itself works fine with sql. Whats wrong? please help: [root@glen exim]# /opt/dovecot/bin/doveadm search -A mailbox Trash savedbefore 90d doveadm(uwe(a)mitmachnet.de): Error: user uwe(a)mitmachnet.de: Initialization failed: mail_location not set and autodetection failed: Mail storage autodetection failed with home=(not set) doveadm(uwe(a)mitmachnet.de): Error: User init failed dovecot.conf: passdb { driver = sql args = /etc/dovecot/sql.conf } userdb { driver = sql args = /etc/dovecot/sql.conf } sql.conf: driver = mysql connect = host=much dbname=toarx user=exim password=xxxxxxxx default_pass_scheme = PLAIN password_query = select user as username, password, userdb_home, userdb_mail, userdb_quota_rule from vusers where email = '%u' user_query = select user as username, userdb_home, userdb_mail, userdb_quota_rule from vusers where email = '%u' iterate_query = select email as user from vusers Cheers Axel

2 1

[Dovecot] Fwd: Re: Dovecot doesnot disconnect at end of pop3 session
by Robert JR 10 Oct '12

10 Oct '12

On 2012-10-10 17:47, Jack Bates wrote: > On 10/10/2012 9:40 AM, Robert JR wrote: > >> telnet mymail.com 110 user username pass password list quit all >> commands work except the quit command, Dovecot hang at this point >> !!! >> Why Dovecot hang on receiving the Quit command !!! and doesnot >> disconnect !! > Please include your dovecot version. Also, does the list command end > with a line that contains a period? You might want to include dovecot > -n > as well, which will show everyone what your mail storage type is and > other relevant information. Jack # 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-279.9.1.el6.x86_64 x86_64 CentOS release 6.3 (Final) auth_mechanisms = plain login auth_username_format = %Lu disable_plaintext_auth = no mail_debug = yes mail_location = mbox:~/mal:INBOX=/var/mail/%u mbox_write_locks = fcntl passdb { driver = pam } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } protocol pop3 { mail_max_userip_connections = 4 pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xv } Please find the output of dovecot -n list command return msg number and size only. Thanks

2 1

[Dovecot] Dovecot doesnot disconnect at end of pop3 session
by Robert JR 10 Oct '12

10 Oct '12

Hello, I have 3 users checking same email account using pop3 (outlook express) suddenly after some hours , users are unable to disconnect from pop3 after checking mail So i telnet to the pop3 and found that the issue is true but i do not know the reason telnet mymail.com 110 user username pass password list quit all commands work except the quit command, Dovecot hang at this point !!! Why Dovecot hang on receiving the Quit command !!! and doesnot disconnect !! Any help is greatly appreciated. Thanks.

2 1

Re: [Dovecot] I need a quota expert
by Tibby 10 Oct '12

10 Oct '12

I'm having problems with dovecot quota configuration. If I Include the driver mysql in dovecot-sql.conf I'm getting this error: dovecot: dict: Error in configuration file /etc/dovecot/dovecot-sql.conf line 1: Unknown setting: driver dovecot: dict: Failed to initialize dictionary 'quotadict' If I Don't include it: dovecot: auth(default): Fatal: sql: driver not set in configuration file /etc/dovecot/dovecot-sql.conf dovecot: auth(default): Fatal: sql: driver not set in configuration file /etc/dovecot/dovecot-sql.conf Now What??? How Should I configure quota ? My SQL has a mail db with a user table. The table has email, password, quota_kb fields. my dovecot.conf: ---------------- protocols = imap imaps pop3 pop3s log_timestamp = "%Y-%m-%d %H:%M:%S " mail_location = maildir:/home/vmail/%d/%n/Maildir disable_plaintext_auth = no ssl_cert_file = /etc/ssl/certs/dovecot.pem ssl_key_file = /etc/ssl/private/dovecot.pem namespace private { separator = . prefix = INBOX. inbox = yes } protocol imap { mail_plugins = quota imap_quota } protocol lda { log_path = /home/vmail/dovecot-deliver.log auth_socket_path = /var/run/dovecot/auth-master postmaster_address = postmaster(a)domain.tld mail_plugins = sieve quota global_script_path = /home/vmail/globalsieverc mail_plugin_dir = /usr/lib/dovecot/modules/lda } protocol pop3 { pop3_uidl_format = %08Xu%08Xv mail_plugins = quota } dict { quotadict = mysql:/etc/dovecot/dovecot-sql.conf } plugin { quota = dict:user::proxy::quotadict quota_rule = *:storage=10M:messages=1000 } auth default { user = root passdb sql { args = /etc/dovecot/dovecot-sql.conf } userdb sql { args = /etc/dovecot/dovecot-sql.conf } socket listen { master { path = /var/run/dovecot/auth-master mode = 0600 user = vmail } client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } } } mail_uid = 5000 mail_gid = 5000 my dovecot-sql.conf: ---------------- driver = mysql connect = host=127.0.0.1 dbname=mail user=****** password=****** default_pass_scheme = CRYPT password_query = SELECT email as user, password, concat('*:storage=', quota_kb) AS quota_rule FROM users WHERE email='%u'; user_query = SELECT CONCAT('/home/vmail/',CONCAT(SUBSTRING_INDEX(email,'@',-1),'/',SUBSTRING_INDEX(email,'@',1))) AS home, 5000 AS uid, 5000 AS gid, concat('*:storage=', quota_kb) AS quota_rule FROM users WHERE email='%u' map { pattern = priv/quota/storage table = user username_field = user value_field = quota_kb } SOMEBODY PLEASE HELP ME!!! :)

2 1

[Dovecot] About ManageSieve and TLS
by 3.listas＠adminlinux.com.br 10 Oct '12

10 Oct '12

Hi, I have a "ubuntu10.04 + dovecot-2.0.13" configuration in my server. It works fine with ~50k accounts. Recently I enabled TLS: $ cat /etc/dovecot/dovecot.conf ... # Use SSL ? ssl = yes ... The goal was to provide only IMAPS and POP3S. But Managesieve says "STARTTLS": $ telnet _MY_IP_ 2000 Trying _MY_IP_... Connected to _MY_IP_. Escape character is '^]'. "IMPLEMENTATION" "K8 ManageSieve" "SIEVE" "comparator-i;ascii-numeric copy envelope fileinto imapflags include notify regex reject relational subaddress vacation" "SASL" "PLAIN LOGIN" "STARTTLS" "VERSION" "1.0" OK "K8 IMAP/POP3 server" doveconf -a shows: service managesieve-login { ... inet_listener sieve { address = _MY_IP_ port = 4190 ssl = no } inet_listener sieve_deprecated { address = _MY_IP_ port = 2000 ssl = no } ... } I think there is something wrong there but I don't know. I think Managesieve should not say "STARTTLS". Can someone help me? Thanks. -- Thiago Henrique adminlinux.com.br

2 2

Re: [Dovecot] LDAP encryption
by James Devine 09 Oct '12

09 Oct '12

I don't think I understand. Right now the problem is the password retrieved from LDAP cannot be hashed to compare against what the user sent because it is encrypted. I have to perform my AES decryption before it can be hashed and compared. On Tue, Oct 9, 2012 at 1:03 PM, btb <btb(a)bitrate.net> wrote: > On 2012.10.09 14.41, James Devine wrote: > >> We have an LDAP server that contains AES encrypted passwords. So far I've >> been able to use this by adding a passdb module that encrypts the user's >> password prior to ldap comparison. Now I am looking at supporting >> client-side encrypted passwords. To do this I need to decrypt the >> password >> returned by LDAP. Is there a way to insert a module to do this decryption >> between ldap returning and the auth mechanism? >> >> that would be unwise, generally speaking. as a rule of thumb, in terms > of security fundamentals, only the rootdn [or equiv] should be able to read > the values in an ldap entry's password attribute. certainly the service > account used by dovecot should not. > > in the context of ldap, authentication should be accomplished by binding > as the user, not by retrieving attribute values and performing string > comparisons. among other things, this decouples the two components and > allows applications [e.g. dovecot] to be unconcerned with whatever password > hashing scheme the directory server might be using. > > -ben >

2 2

[Dovecot] LDAP encryption
by James Devine 09 Oct '12

09 Oct '12

We have an LDAP server that contains AES encrypted passwords. So far I've been able to use this by adding a passdb module that encrypts the user's password prior to ldap comparison. Now I am looking at supporting client-side encrypted passwords. To do this I need to decrypt the password returned by LDAP. Is there a way to insert a module to do this decryption between ldap returning and the auth mechanism?

1 0

[Dovecot] Quota - usage counting.
by wamp＠promax.media.pl 09 Oct '12

09 Oct '12

Hello, I use dovecot 1.2 version with postfix virtual users and mysql. All information about quota for every user is in mysql table. How dovecot compare if quota in database is over quota in /var/vmail/exampleuser directory ? It uses something like du command ? regards, Wamp

2 2