- dovecot - dovecot.org

[Dovecot] Vacation Notice Not Working
by Ch Chai 03 Jan '13

03 Jan '13

To Dovecot, When I try to active Vacation Notice using Egroupware, I can see (xxxx.sieve) generated in mail server. but not working. OS : Fedora 14 Installed Packages: - Postfix - Dovecot (2.0.15) note : come with Fedora 14 - Dovecot-pigeonhole (2.0.15) note: come with Fedora 14 - ispconfig 2 - Egroupware (Email Client) my setting in /etc/dovecot/dovecot.conf protocols = sieve imap pop3 plugin { plugin = sieve sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } service managesieve-login { inet_listener managesieve-login { address = * port = 2000 } } protocol lda { #hostname = example.com mail_plugins = sieve quota postmaster_address = postmaster(a)example.com auth_socket_path = /var/run/dovecot/auth-master log_path = /var/log/dovecot-deliver.log } protocol sieve { managesieve_implementation_string = Cyrus timsieved v2.2.13 managesieve_logout_format = bytes ( in=%i : out=%o ) managesieve_max_line_length = 65536 }

4 10

[Dovecot] How To Remove?
by Christian Guastella 03 Jan '13

03 Jan '13

hi, i was looking to setup imap on an old PPC G5 mac i have running as webserver and gateway/firewall machine.. found a dovecot-2.1.7-0.pkg online, and it looked like the typical easy install thing.. someplace called rudix made the package.. not much there in way of instructions, but after i finally figured out where the executable had been stuck i tried it, just to see what kinda config errors would be thrown-up.. got the line below.. /usr/local/sbin/dovecot: Bad CPU type in executable so i'm guessing this means dovecot is intel-cpu only? i don't have the time or patience to read all the unix junk, and get a compiler, do all the make files etc.. been years since i did any of that, and don't want to do it again.. the pkg installer did not come with an uninstaller, and since the install is pretty much useless, is there some list of what it installed so i can get rid of it all? thanks, christian

4 4

[Dovecot] Help with LDA
by Joy 01 Jan '13

01 Jan '13

Hi, Can anyone tell me how to specify correctly the following line:- |/var/qmail/bin/preline -f /usr/local/dovecot/libexec/dovecot/dovecot-lda -d $USER@$DOMAIN i want dovecot lda to look for mail address instead of uid which is without domain in my case. Thanks

1 0

Re: [Dovecot] Dovecot Virtual Users with Sendmail
by DormitionSkete＠hotmail.com 01 Jan '13

01 Jan '13

Well our situation is kind of like this: We've been using UW-Imap for 12-15 years, and have loved it. It has a beauty and simplicity to it that is simply wonderful. We're located in a remote part of the Rocky Mountains, and the only internet connection we can get that's faster than a dial-up is a satellite. Lousy upload speeds. Can't host our own sites here. We've been hosting our sites on one of our parishioner's servers for years; but through the years, that's become more and more problematic, and we'd like to do more with it than we currently can. We'd like to set up our own server at our guest house in town. I wanted to use OpenIndiana (Solaris) to take advantage of some of the really amazing features it has. So, I set up UW-Imap on it. Works great. Glory be to our holy God. The problem is, after I got all that working, I went to set up the users for it, and discovered the GUI for creating the users won't allow me to add any users with usernames longer than eight characters. I'm not real dependent on GUI's, and a quick search on the net told me that I can easily add the users with the long user names from the command line. So, I asked on the UW-Imap and on the OpenIndiana list for people's experience about this. Two people said they'd been using long user names on Solaris and BSD for years without any problems, while two others recommended changing to an IMAP server that supports virtual users. One of those recommended Dovecot. So I started looking at Dovecot. I'm not real keen on Sendmail, but to make matters worse, we host our own email on our server here in the mountains. Since we can't get reverse DNS set up for our satellite connection, we have to relay our emails through our parishioner's server, which does have reverse DNS, or else most people's email servers reject them as spam. We also need to be able to send and receive emails from multiple domains. So, I have to be able to figure out how to do both parts of the relay -- our part where we tell our MTA to relay it through the other host, and what will become the server at our guest house to accept those emails and relay them on to the recipients. And the multiple domain issue. I can do all this with UW-Imap and Sendmail, because we've already done all the fighting necessary to get it to work. We've been doing it for years. It just leaves us with the question of whether it's better to go with using UW-Imap on a system that's not designed to support long user names, and possibly getting bit by that, or whether it's better to fight it out trying to learn all this other stuff with a different IMAP server and MTA? Fun! I could probably get Cyrus IMAP to work with Sendmail, because I tried it briefly years ago and already have gone through the grief of figuring that out. But I didn't particularly care for it. One of the things I like most about UW-Imap -- and Dovecot shares this -- is that it's easy to backup, restore inadvertently deleted directories, and to move emails from one server to another. From what I remember, Cyrus wasn't so friendly about that. And it was more difficult to administer than UW-Imap and Dovecot. After reading the 13-page article Ken posted this afternoon, I started looking at Postfix. My impression is, that maybe this might be a good route to try. Dovecot - PostFix - and if I'm going to go through all that, I might as well go with Sieve, instead of Procmail, like we've been using for years. I used Sieve briefly with Cyrus. I've never been thrilled with Procmail. So, with all that background, if anyone would like to share any suggestions or advice, I would certainly appreciate it. Cordially, Peter, hieromonk On Dec 31, 2012, at 8:34 PM, Noel Butler wrote: > On Mon, 2012-12-31 at 16:52 -0700, DormitionSkete(a)hotmail.com wrote: >> >> Thank you very much for the article. It was quite interesting. All thirteen pages! >> >> Unless somebody else posts that they've managed to get Sendmail to work with Dovecot virtual users, then I think your suggestion to look at a different MTA might just be the best route to take. >> >> Thank you again. I do appreciate it. >> >> I hope you have a happy new year! -- All year long!! >> >> fp >> >> > Hi, > Years (well decade) ago we used Sendmail, then we started having more domains, it was getting very messy, the choice was move to Cyrus or change our MTA,Cyrus was a maze of bdb hell it was very picky, so it never made it off the dev box, moved to qmail with vpopmail , but then qmail was useless as a ..... on a bull, so we used sendmail up front redirecting to qmail, in 2008 we re structured and moved to postfix and dovecot and never looked back since. > > If you don't have a central portal, there is code out there to allow you and your domain managers and their users to manage their mail, postfixadmin (I never really liked) or vmail manager GRS from grsoft, wrote by Peter Gutwein which is what I use personally. > > I was a long time fan of sendmail, but I tried to get mysql options included to make virtual users easy, but it was decided that would not happen, and as I predicted, sendmails popularity would suffer because of it, since postfix w/mysql is a breeze. > > So learn from everyone else's lessons, and give very serious consideration to changing your setup now, before you get too big an the change will become a nightmare <face-smile.png> > >

1 0

[Dovecot] dovecot crashing?
by Eric 30 Dec '12

30 Dec '12

Happy holidays! I am experiencing an issue when trying to check my mail using IMAP. with Dovecot I have tried checking my mail using a full GUI client (Thunderbird) and telnet. Both times I get disconnected before all of my messages can be downloaded and I see an error in my mail log. Here are the details: [root@cust19-1-prod-domain userqa]# dovecot --version 2.0.9 [root@cust19-1-prod-domain userqa]# dovecot -n # 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-164.11.1.el5 x86_64 CentOS release 5.4 (Final) disable_plaintext_auth = no login_trusted_networks = 172.19.136.0 mail_location = maildir:~/Maildir mail_max_userip_connections = 100 mbox_write_locks = fcntl mmap_disable = yes passdb { args = scheme=plain username_format=%n /etc/dovecot/users driver = passwd-file } protocols = imap ssl = no userdb { args = username_format=%n /etc/dovecot/users driver = passwd-file } [root@cust19-1-prod-domain userqa]# i try to check my mail: username@ops1-1-domain:~$ telnet cust19-1-prod-domain imap Trying 172.19.136.223... Connected to cust19-1-prod-domain.domain.net (172.19.136.223). Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN] Dovecot ready. 1 LOGIN userqa mypassword 1 OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS] Logged in 3 EXAMINE INBOX * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS ()] Read-only mailbox. * 1 EXISTS * 0 RECENT * OK [UNSEEN 1] First unseen. * OK [UIDVALIDITY 1356130761] UIDs valid * OK [UIDNEXT 5] Predicted next UID * OK [HIGHESTMODSEQ 1] Highest 3 OK [READ-ONLY] Select completed. 4 FETCH 1 BODY[] I get some binary output and some mail headers, but then it crashes.. Not sure if you guys want to see all of the extremely verbose output, so I put it at the end of this message. The last messages that it processes is a message with an Excel spreadsheet attached to it (a .xlsx file) i enabled core dumps: echo 'DAEMON_COREFILE_LIMIT="unlimited"' >> /etc/sysconfig/dovecot Now I see this in /var/log/maillog: 2012-12-25T17:53:47-08:00 cust19-1-prod-domain dovecot: master: Error: service(imap): child 11265 killed with signal 11 (core dumped) core dumps are being written here, but they're empty: [root@cust19-1-prod-domain userqa]# pwd /mnt/mail/userqa [root@cust19-1-prod-domain userqa]# ls -lh total 20K -rw------- 1 userqa userqa 0 Dec 25 17:52 core.11111 -rw------- 1 userqa userqa 0 Dec 25 17:53 core.11265 -rw------- 1 userqa userqa 0 Dec 25 17:58 core.11812 drwx------ 7 userqa userqa 4.0K Dec 25 17:58 Maildir [root@cust19-1-prod-domain userqa]# What should I try now? Is it possible that Dovecot is having difficulty processing the attachment file? If I delete this user's mailbox file and send basic text e-mail to the user I can read/retrieve them just fine.. there only seems to be an issue when this message with its attachment arrives. The attachment seems small in size: Content-Disposition: attachment; filename="report_amex.xlsx"; size=20527; That means the attachment is 20527 bytes, correct? Thank you for any suggestions/help you can offer! Here's the message that it seems to be having issues with: Return-Path: <user(a)company.com> Received: from mxout.mailprovider.com (slb1-prod-domain.domain.net[172.19.136.4]) by cust19-1-prod-domain.domain.net (8.13.8/8.13.8) with ESMTP id qBOM8oIE029715 for <userqa_2938(a)integration.company.com>; Mon, 24 Dec 2012 14:08:50 -0800 Received: from mxout.mailprovider.com (localhost [127.0.0.1]) by mxout.mailprovider.com (Postfix) with ESMTP id 017E455325B for <userqa_2938(a)integration.company.com>; Mon, 24 Dec 2012 17:08:51 -0500 (EST) X-Virus-Scanned: by SpamTitan at mail.lan Received: from HUB025.mail.lan (unknown [10.110.2.1]) by mxout.mailprovider.com (Postfix) with ESMTP id 63DA0553132 for <userqa_2938(a)integration.company.com>; Mon, 24 Dec 2012 17:08:50 -0500 (EST) Received: from MAILR001.mail.lan ([10.110.18.28]) by HUB025.mail.lan ([10.110.17.25]) with mapi; Mon, 24 Dec 2012 17:08:48 -0500 From: User Name <user(a)company.com> To: "userqa_2938(a)integration.company.com" <userqa_2938(a)integration.company.com> Date: Mon, 24 Dec 2012 17:08:47 -0500 Subject: Thread-Index: Ac3fx0lCAoza6rTzQTSh8g52mx84GwAC2GGwAAH1lkAAkiyekA== Message-ID: <0370E60157CA7E4097D81B9E09728A941CB269A29D(a)MAILR001.mail.lan> Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: yes X-MS-TNEF-Correlator: acceptlanguage: en-US Content-Type: multipart/mixed; boundary="_004_0370E60157CA7E4097D81B9E09728A941CB269A29DMAILR001maill_" MIME-Version: 1.0 --_004_0370E60157CA7E4097D81B9E09728A941CB269A29DMAILR001maill_ Content-Type: multipart/alternative; boundary="_000_0370E60157CA7E4097D81B9E09728A941CB269A29DMAILR001maill_" --_000_0370E60157CA7E4097D81B9E09728A941CB269A29DMAILR001maill_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable From: User Name Sent: Friday, December 21, 2012 6:23 PM To: 'userqa_2938(a)integration.company.com' Subject: FW: With Best Regards, User Name From: User Name Sent: Friday, December 21, 2012 5:27 PM To: 'userqa_2938(a)integration.company.com' Subject: FW: With Best Regards, User Name From: User Name Sent: Friday, December 21, 2012 4:05 PM To: 'userqa_2938(a)integration.company.com' Subject: With Best Regards, User Name --_000_0370E60157CA7E4097D81B9E09728A941CB269A29DMAILR001maill_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"><head><META HTTP-EQUIV=3D"Content-Type" CONTENT= =3D"text/html; charset=3Dus-ascii"><meta name=3DGenerator content=3D"Micros= oft Word 12 (filtered medium)"><style></style></head><body lang=3DEN-US link=3Dblue vli= nk=3Dpurple><div class=3DWordSection1><o:p> </o:p><o:p> </o:p><div><s= pan style=3D'color:#1F497D'>With Best Regards,<o:p></o:p>User Name<o:p></o:p></= p>______________________= _<o:p></o:p>s= kype: user<o:p></o:p>cell phone: +1 224 600 0072<o:p></o:p></div><o:p> </o:p><div= ><div style=3D'border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in= 0in 0in'>From: User Name Sent: Friday, Dec= ember 21, 2012 6:23 PM To: 'userqa_2938(a)integration.aggregateknow= ledge.com' Subject: FW: <o:p></o:p></div></div><o:p> </o:p><o:p> </o:p><div>With Best Regards,<o:p></o:p>User Name<o:p></o:p>_______________________<o:p></= o:p>skype: eg= irik<o:p></o:p>cell phone: +1 224 600 0072<o:p></o:p></div><o:p> </o:p><div><div styl= e=3D'border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in'>= From: User Name Sent: Friday, December 21, = 2012 5:27 PM To: 'userqa_2938(a)integration.company.com'= Subject: FW: <o:p></o:p></div></div><o:p> </o:p><o:p> </o:p><div>With Best Regards,<o:p></o:p><spa= n style=3D'color:#1F497D'>User Name<o:p></o:p>_______________________<o:p></o:p></span= >skype: user<o:p><= /o:p>cell pho= ne: +1 224 600 0072<o:p></o:p></div><o:p> </o:p><div><div style=3D'borde= r:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in'>From: User Name Sent: Friday, December 21, 2012 4:0= 5 PM To: 'userqa_2938(a)integration.company.com' S= ubject: <o:p></o:p></div></div><o:p>&nb= sp;</o:p><o:p> </o:p><o:p> </o:p>With Best Regards,<o:p></o:p></p= >User Name<o:p></o:p>______= _________________<o:p></o:p>skype: user<o:p></o:= p>cell phone: +1 224 600 0072<o:p></o:p><o:p> </o:p></div></body></html>= --_000_0370E60157CA7E4097D81B9E09728A941CB269A29DMAILR001maill_-- --_004_0370E60157CA7E4097D81B9E09728A941CB269A29DMAILR001maill_ Content-Type: application/vnd.openxmlformats-officedocument.spreadsheetml.sheet; name="report_company.xlsx" Content-Description: report_company.xlsx Content-Disposition: attachment; filename="report_company.xlsx"; size=20527; creation-date="Thu, 11 Oct 2012 22:38:14 GMT"; modification-date="Mon, 24 Dec 2012 22:08:22 GMT" Content-Transfer-Encoding: base64 UEsDBBQABgAIAAAAIQDretKTYgEAAJAEAAATANwBW0NvbnRlbnRfVHlwZXNdLnhtbCCi2AEooAAC AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAArFTLTsMwELwj8Q+RryhxywEh1LQHHkeoBHyAsTeNVce2vNvS/j2bhFaASqSq vSSKop2ZnRl7Mts0LltDQht8KcbFSGTgdTDWL0rx/vaU34oMSXmjXPBQii2gmE0vLyZv2wiY8bTH UtRE8U5K1DU0CosQwfOfKqRGEX+mhYxKL9UC5PVodCN18ASecmoxxHTywgKSNZDNVaJn1TCP3DhJ jAb9c1wwnsju+8GWuxQqRme1IlYu1978Yc1DVVkNJuhVw1xFB3bVosh/CZG2DvBkKowJlMEagBpX 9KA75geo1MpR9rhhB3rTEzg8brVvMwue7NbH2kYcYBj2btiTz5CWHyEsz+1K607RKOt3ug+VgNOb pxBRctYnC4DWcgMmjwwJiSzsPTvEzQVsd+9iRNm9Tm/h72rs8Yc8YB1YqwTmlRKfyrPX8yf2kI59 FjokOD6MXWfb6QMJyO4+mX4BAAD//wMAUEsDBBQABgAIAAAAIQC1VTAj9QAAAEwCAAALAM4BX3Jl bHMvLnJlbHMgosoBKKAAAgAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAADlDAAAeGwv c3R5bGVzLnhtbFBLAQItABQABgAIAAAAIQDppiW4ggYAAFMbAAATAAAAAAAAAAAAAAAAALIUAAB4 bC90aGVtZS90aGVtZTEueG1sUEsBAi0AFAAGAAgAAAAhAOhJXyi8LAAAyx8BABgAAAAAAAAAAAAA AAAAZRsAAHhsL3dvcmtzaGVldHMvc2hlZXQxLnhtbFBLAQItABQABgAIAAAAIQAU45/9UAEAAGMC AAARAAAAAAAAAAAAAAAAAFdIAABkb2NQcm9wcy9jb3JlLnhtbFBLAQItABQABgAIAAAAIQBxujxc hQEAAAMDAAAQAAAAAAAAAAAAAAAAAN5KAABkb2NQcm9wcy9hcHAueG1sUEsFBgAAAAAKAAoAgAIA AJlNAAAAAA== --_004_0370E60157CA7E4097D81B9E09728A941CB269A29DMAILR001maill_-- Connection closed by foreign host.

3 5

Re: [Dovecot] question
by Simon Brereton 29 Dec '12

29 Dec '12

On Dec 29, 2012 3:46 PM, "Matt K" <mattk(a)kraner.us> wrote: > > At 08:40 PM 12/28/2012, Simon Brereton wrote: >> >> On Dec 28, 2012 8:28 PM, <mattk(a)kraner.us> wrote: >> > >> > I just install Dovecot and postfix. When I'm pull dovecot I see in the log >> > that its checking for mail. if a put a test message locally on the server >> > I can pull the message down to my cell phone and other computers. But when >> > I try to a message from gmail or aol it doesn't come in to the server. >> > >> > >> > it always bounces back to the place were I sent it from >> >> That would indicate a postfix issue since it would seem you are not getting >> mail from outside your network/host. >> >> But either way you'll need config and log files of you'd like real help. >> >> Simon > > > here is what i was able to find in /var/log/mail.err > Dec 28 18:02:36 kraner postfix/smtpd[26226]: fatal: no SASL authentication mechanisms > Dec 28 18:09:17 kraner postfix/smtpd[26229]: fatal: no SASL authentication mechanisms > Dec 28 18:29:15 kraner postfix/smtpd[26395]: fatal: no SASL authentication mechanisms > Dec 28 18:43:18 kraner postfix/smtpd[26736]: fatal: no SASL authentication mechanisms > Dec 28 18:48:59 kraner postfix/smtpd[26741]: fatal: no SASL authentication mechanisms > Dec 29 18:06:06 kraner postfix[27406]: fatal: usage: postfix [-c config_dir] [-Dv] command > Dec 29 18:19:38 kraner postfix/smtpd[27511]: fatal: no SASL authentication mechanisms > Dec 29 18:22:48 kraner postfix/smtpd[27514]: fatal: no SASL authentication mechanisms > Dec 29 20:20:43 kraner postfix/smtpd[27862]: fatal: no SASL authentication mechanisms > Dec 29 20:42:03 kraner postfix/smtpd[27969]: fatal: no SASL authentication mechanisms > > Postfix config file > > alias_database = hash:/etc/aliases > alias_maps = hash:/etc/aliases > body_checks = regexp:/etc/postfix/body_checks > command_directory = /usr/sbin > config_directory = /etc/postfix > daemon_directory = /usr/lib/postfix > data_directory = /var/lib/postfix > debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin ddd $daemon_directory/$process_name $process_id & sleep 5 > header_checks = regexp:/etc/postfix/header_checks > home_mailbox = Maildir/ > inet_protocols = ipv4 > local_recipient_maps = proxy:unix:passwd.byname $alias_maps > mailbox_size_limit = 1073741824 > mailq_path = /usr/bin/mailq > message_size_limit = 10485760 > mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain > mydomain = kraner.org > myhostname = kraner.org > mynetworks = 127.0.0.0/8 > myorigin = $mydomain > newaliases_path = /usr/bin/newaliases > sendmail_path = /usr/sbin/postfix > setgid_group = postdrop > smtpd_banner = $myhostname ESMTP $mail_name (@@DISTRO@@) > smtpd_client_restrictions = permit_mynetworks,reject_unknown_client,permit > smtpd_recipient_restrictions = permit_mynetworks,permit_auth_destination,permit_sasl_authenticated,reject > smtpd_sasl_auth_enable = yes > smtpd_sasl_local_domain = $myhostname > smtpd_sasl_path = private/auth > smtpd_sasl_security_options = noanonymous > smtpd_sasl_type = dovecot > unknown_local_recipient_reject_code = 550 > fatal: no SASL authentication mechanisms is pretty clear. Postfix doesn't allow external hosts to connect & relay mail, which explains what you're seeing. Why you're seeing that is better addressed on the postfix list, although you seem to have told postfix to use Dovecot for sasl auth, so maybe, since this is the Dovecot list you should send your Dovecot conf so we can see why it's not working. Also, if you ask on the postfix list you will be asked for the out-put of postfinger which can diagnose sasl problems. Simon

1 0

Re: [Dovecot] question
by Matt K 29 Dec '12

29 Dec '12

At 08:40 PM 12/28/2012, Simon Brereton wrote: >On Dec 28, 2012 8:28 PM, <mattk(a)kraner.us> wrote: > > > > I just install Dovecot and postfix. When I'm pull dovecot I see in the log > > that its checking for mail. if a put a test message locally on the server > > I can pull the message down to my cell phone and other computers. But when > > I try to a message from gmail or aol it doesn't come in to the server. > > > > > > it always bounces back to the place were I sent it from > >That would indicate a postfix issue since it would seem you are not getting >mail from outside your network/host. > >But either way you'll need config and log files of you'd like real help. > >Simon here is what i was able to find in /var/log/mail.err Dec 28 18:02:36 kraner postfix/smtpd[26226]: fatal: no SASL authentication mechanisms Dec 28 18:09:17 kraner postfix/smtpd[26229]: fatal: no SASL authentication mechanisms Dec 28 18:29:15 kraner postfix/smtpd[26395]: fatal: no SASL authentication mechanisms Dec 28 18:43:18 kraner postfix/smtpd[26736]: fatal: no SASL authentication mechanisms Dec 28 18:48:59 kraner postfix/smtpd[26741]: fatal: no SASL authentication mechanisms Dec 29 18:06:06 kraner postfix[27406]: fatal: usage: postfix [-c config_dir] [-Dv] command Dec 29 18:19:38 kraner postfix/smtpd[27511]: fatal: no SASL authentication mechanisms Dec 29 18:22:48 kraner postfix/smtpd[27514]: fatal: no SASL authentication mechanisms Dec 29 20:20:43 kraner postfix/smtpd[27862]: fatal: no SASL authentication mechanisms Dec 29 20:42:03 kraner postfix/smtpd[27969]: fatal: no SASL authentication mechanisms Postfix config file alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases body_checks = regexp:/etc/postfix/body_checks command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/lib/postfix data_directory = /var/lib/postfix debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin ddd $daemon_directory/$process_name $process_id & sleep 5 header_checks = regexp:/etc/postfix/header_checks home_mailbox = Maildir/ inet_protocols = ipv4 local_recipient_maps = proxy:unix:passwd.byname $alias_maps mailbox_size_limit = 1073741824 mailq_path = /usr/bin/mailq message_size_limit = 10485760 mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain mydomain = kraner.org myhostname = kraner.org mynetworks = 127.0.0.0/8 myorigin = $mydomain newaliases_path = /usr/bin/newaliases sendmail_path = /usr/sbin/postfix setgid_group = postdrop smtpd_banner = $myhostname ESMTP $mail_name (@@DISTRO@@) smtpd_client_restrictions = permit_mynetworks,reject_unknown_client,permit smtpd_recipient_restrictions = permit_mynetworks,permit_auth_destination,permit_sasl_authenticated,reject smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot unknown_local_recipient_reject_code = 550

2 1

[Dovecot] Update 1.2 -> 2.0 ... INBOX away?
by Martin Rabl 29 Dec '12

29 Dec '12

Hi, yesterday I did an update from dovecot 1.2 to 2.0.19 (Ubuntu 10.04 -> 12.04). After fixing the configuration dovecot startups as it should, but with one error, I don't understand: the INBOX will not be delivered to the Mailclient and will not be filled by "deliver". Instead, dovecot create the two dirs "new" and "cur" directly in "Maildir". the filesystem looks now like: domain/user1/Maildir/INBOX # official INBOX domain/user1/Maildir/new # new mail domain/user1/Maildir/cur # read mail We have searched for an configuration error, but didn't found anything - or did not see one ;-) Maybe there is someone in the list, which see our error in a moment? We are using only imap/s and managesieve, no pop3. Maildir-Layout is FS. Here a snippet of our configuration: ------------ mail_home = mail_location = maildir:~/Maildir:LAYOUT=fs namespace { hidden = no inbox = yes list = yes location = prefix = separator = / subscriptions = yes type = private } namespace { list = yes location = maildir:%%h/Maildir/:INDEX=%%h/Maildir/shared/%u:LAYOUT=fs prefix = shared/%%u/ separator = / subscriptions = no type = shared } namespace { list = yes location = maildir:/srv/vmail/public:LAYOUT=fs prefix = public/ separator = / subscriptions = no type = public } protocol lda { mail_plugins = sieve autocreate } protocol imap { imap_client_workarounds = delay-newmail tb-lsub-flags tb-lsub-flags mail_max_userip_connections = 10 mail_plugins = acl autocreate imap_acl } ------------ Hope you can help! Thank you! Martin

2 3

[Dovecot] question
by mattk＠kraner.us 29 Dec '12

29 Dec '12

I just install Dovecot and postfix. When I'm pull dovecot I see in the log that its checking for mail. if a put a test message locally on the server I can pull the message down to my cell phone and other computers. But when I try to a message from gmail or aol it doesn't come in to the server. it always bounces back to the place were I sent it from

3 2

[Dovecot] mdbox: more then one altstorage
by Peer Heinlein 29 Dec '12

29 Dec '12

The mdbox-format with the altstorage-feature is quite nice and important. But we're having much more then >> 30 TB of maildata and doing an fsck on huge partitions takes too much (down-) time for our mailsystem. It would be much easier, if Dovecot would be able to use at least THREE storage-paths for his m-Files (and not just TWO like now). Having an altstorage1 and altstorage2, we would be able to move away all mails from on altstorage-mountpoint, we could put this storage-moungpoint into "maintenance" and do an fsck without Downtime for Dovecot. It would be nice having a doveadm-feature to put a altstorage-path in "maintenance-mode", so to move easily away all m-files to other alt-storage-paths and to let Dovecot know not to use this locked partition. Having even more then 3 storage-paths would be nice for huge setups: In this case we could easily use different SMALLER partitions without having just two or three huge partitions > 15 TB. The architecture of the altstorage-system is nice and simple. Wouldn't it be easily possible to look (at least) in three, then just in two places for a m-file? What about a "hash_dir"-system for the storage? What about a configuration-parameter like altstorage_dirs=4 which would mean, that there are 4 storage-mountpoints that could be addressed by "%m": mail_location = mdbox:/vmail/%d/%n/mdbox:altstorage/alt/%m/%d/%n In this case, Dovecot could easily use all existing partitions automatically "round-robin". Or maybe it would be better to tell Dovecot the partitions by: altstorage_dirs_existing = 1,2,3,4 altstorage_dirs_newmail = 1,4 so it would be very easy to tell Dovecot in which partitions he has to look for m-files and where he is allowed to save round-robin new e-mails. With this setup it's easy to put a partition in maintenance mode. Peer -- Heinlein Support GmbH Schwedter Str. 8/9b, 10119 Berlin http://www.heinlein-support.de Tel: 030 / 405051-42 Fax: 030 / 405051-19 Zwangsangaben lt. §35a GmbHG: HRB 93818 B / Amtsgericht Berlin-Charlottenburg, Geschäftsführer: Peer Heinlein -- Sitz: Berlin

4 5

[Dovecot] dovecot 2.1.12 panic in mbox-sync.c
by "Antje Miederhöfer" 28 Dec '12

28 Dec '12

Hello! I use dovecot 2.1.12 locally on a 32bit Linux with an ext4 filesystem and after deleting a lot of emails from a mbox folder, I now get the following messages in the log: dovecot: imap(amied): Panic: file mbox-sync.c: line 1351 (mbox_sync_handle_eof_updates): assertion failed: (offset == 0 || offset > 31) dovecot: imap(amied): Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(+0x4559a) [0x6f68959a] -> /usr/lib/dovecot/libdovecot.so.0(+0x45611) [0x6f689611] -> /usr/lib/dovecot/libdovecot.so.0(i_fatal+0) [0x6f658fa0] -> /usr/lib/dovecot/libdovecot-storage.so.0(+0x2d707) [0x6f708707] -> /usr/lib/dovecot/libdovecot-storage.so.0(mbox_sync+0x53) [0x6f7091d3] -> /usr/lib/dovecot/libdovecot-storage.so.0(mbox_storage_sync_init+0x6d) [0x6f70936d] -> /usr/lib/dovecot/libdovecot-storage.so.0(mailbox_sync_init+0x3b) [0x6f72333b] -> /usr/lib/dovecot/libdovecot-storage.so.0(mailbox_sync+0x3f) [0x6f72347f] -> dovecot/imap(cmd_select_full+0x16b) [0x805529b] -> dovecot/imap(cmd_select+0x17) [0x8055c57] -> dovecot/imap(command_exec+0x32) [0x80596f2] -> dovecot/imap() [0x80586fd] -> dovecot/imap() [0x805880d] -> dovecot/imap(client_handle_input+0x125) [0x8058a05] -> dovecot/imap(client_input+0x60) [0x80592f0] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x44) [0x6f6981f4] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0xce) [0x6f6991ce] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_run+0x40) [0x6f697cd0] -> /usr/lib/dovecot/libdovecot.so.0(master_service_run+0x2e) [0x6f680dbe] -> dovecot/imap(main+0x279) [0x804fdd9] -> /lib/libc.so.6(__libc_start_main+0xf5) [0x6f49bad5] -> dovecot/imap() [0x804ff51] The mbox file seems to be unchanged and a .lock file remains even after stopping dovecot. The folder is not accessible any more. A fix would be nice. :-) dovecot config: listen = 127.0.0.1 mail_fsync = never mail_location = maildir:/var/mails/%u managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace { inbox = no location = mbox:/var/mails/mbox/%u prefix = mbox/ separator = / } namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = separator = / } passdb { args = * driver = pam } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap ssl_cert = </etc/ssl/dovecot/server.pem ssl_key = </etc/ssl/dovecot/server.key userdb { driver = passwd } protocol lda { mail_plugins = sieve } Greetings Antje

1 0

[Dovecot] Mixing v2.1 and 2.0 directors ?
by Jan-Frode Myklebust 28 Dec '12

28 Dec '12

I'm preparing to set up a new set of directors on dovecot-ee-2.1.10.3-1, but would prefer to do this a bit gradually. Will it be OK to set up a ring of directors with 2x dovecot-ee-2.1.10.3-1 and 2x dovecot-2.0.14 ? -jf

2 2

[Dovecot] Help Regarding Multiple Base DN
by Joy 28 Dec '12

28 Dec '12

Dear Expert, Can i specify multiple Base DN for user lookup in dovecot like :- dc=abc,dc=com dc=abc,dc=net dc=xzy,dc=com dc=xyz,dc=net Thanks

3 3

[Dovecot] dovecot testinstallation does not tell how to quit
by Robert Moskowitz 28 Dec '12

28 Dec '12

I am having problems logging in with RoundCube, so thought I should see if there were instructions for testing Dovecot login, and sure enough I found some at: wiki.dovecot.org/Testinstallation Well it works, so the problem is probably all RoundCube's, but this wiki page is missing an important line about how to end the Telnet session without killing Telnet! What is the quit/exit command? And please add this to the wiki! Oh, I just guessed it: a logout

3 3

[Dovecot] Missing Emails
by David Morsberger 28 Dec '12

28 Dec '12

I reported a problem with disappearing emails on my Apple Mountain Lion server. Not sure if it ever stopped but I do know it is happening again. Help!!!! This is a company email server. They live and die by their emails. Emails show up in inbox and then disappear. Anyone know why our emails are disappearing? I see a reference to it in the dovecot.index.cache file (last item) ^@^@^@Q^@^@^@0^@^@^@^@^@^@^@Message-ID: <1356660917.93498.YahooMailNeo(a)web163605.mail.gq1.yahoo.com> ^@^@^@^M^@^@^@7^@^@^@4^@^@^@^@^@^@^@Subject: Funeral program for Eileen Zbignewich ^@^E^@^@^@^@^@^@^@^F^@^@^@Z^@^@^@7^@^@^@^@^@^@^@Content-Type: multipart/mixed; boundary="-1578497492-264297203-1356660917=:93498" ^@^@^G^@^@^@4^@^@^@1^@^@^@^@^@^@^@Date: Thu, 27 Dec 2012 18:15:17 -0800 (PST) ^@^@^@^@^@^@^@^K^@^@^@^@^@^@^@^L^@^@^@^@^@^@^@^N^@^@^@8^@^@^@5^@^@^@^@^@^@^@To: "info(a)mmpcrofton.com" <info(a)mmpcrofton.com> I searched the filesystem and cannot find them. bash-3.2# find . -exec grep Zbignewich {} \; -print Dec 04 00:30:26 master: Info: Dovecot v2.0.19apple1 starting up (core dumps disabled) I believe I turned on all debug and info messages. Here is what I see in postfix log: Dec 27 21:15:39 mini.mmpcrofton.com postfix/smtpd[20081]: 3CE164F4420: client=pascal.junkemailfilter.com[184.105.182.188] Dec 27 21:15:39 mini.mmpcrofton.com postfix/cleanup[20086]: 3CE164F4420: message-id=<1356660917.93498.YahooMailNeo(a)web163605.mail.gq1.yahoo.com> Dec 27 21:15:40 mini.mmpcrofton.com postfix/qmgr[95]: 3CE164F4420: from=<hagermary(a)yahoo.com>, size=307659, nrcpt=1 (queue active) Dec 27 21:15:40 mini.mmpcrofton.com postfix/smtpd[20081]: disconnect from pascal.junkemailfilter.com[184.105.182.188] Dec 27 21:15:40 mini.mmpcrofton.com postfix/smtpd[20106]: connect from localhost[127.0.0.1] Dec 27 21:15:40 mini.mmpcrofton.com postfix/smtpd[20106]: 5168E4F4447: client=localhost[127.0.0.1] Dec 27 21:15:40 mini.mmpcrofton.com postfix/cleanup[20086]: 5168E4F4447: message-id=<1356660917.93498.YahooMailNeo(a)web163605.mail.gq1.yahoo.com> Dec 27 21:15:40 mini.mmpcrofton.com postfix/smtpd[20106]: disconnect from localhost[127.0.0.1] Dec 27 21:15:40 mini.mmpcrofton.com postfix/qmgr[95]: 5168E4F4447: from=<hagermary(a)yahoo.com>, size=308299, nrcpt=1 (queue active) Dec 27 21:15:40 mini.mmpcrofton.com postfix/smtp[20102]: 3CE164F4420: to=<info(a)mmpcrofton.com>, relay=127.0.0.1[127.0.0.1]:10024, delay=1.1, delays=0.85/0.01/0/0.27, dsn=2.0.0, status=sent (250 2.0.0 from MTA(smtp:[127.0.0.1]:10025): 250 2.0.0 Ok: queued as 5168E4F4447) Dec 27 21:15:40 mini.mmpcrofton.com postfix/qmgr[95]: 3CE164F4420: removed Dec 27 21:15:40 mini.mmpcrofton.com postfix/pipe[20110]: 5168E4F4447: to=<graphicartist(a)mini.mmpcrofton.com>, orig_to=<info(a)mmpcrofton.com>, relay=dovecot, delay=0.39, delays=0.03/0.01/0/0.35, dsn=2.0.0, status=sent (delivered via dovecot service) Dec 27 21:15:41 mini.mmpcrofton.com postfix/qmgr[95]: 5168E4F4447: removed dovecot_info.log Dec 27 21:15:40 lda(pid 20111 user graphicartist): Info: msgid=<1356660917.93498.YahooMailNeo(a)web163605.mail.gq1.yahoo.com>: saved mail to INBOX Dec 27 21:15:40 lda(pid 20111 user graphicartist): Info: push-notify: push notification enabled Dec 27 21:15:40 lda(pid 20111 user graphicartist): Info: push-notify: notify: graphicartist Dec 27 21:15:40 lda(pid 20111 user graphicartist): Info: push-notify: data sent: 1680 dovecot_debug.log Dec 27 21:15:40 lda: Debug: Loading modules from directory: /Applications/Server.app/Contents/ServerRoot/usr/lib/dovecot Dec 27 21:15:40 lda: Debug: Module loaded: /Applications/Server.app/Contents/ServerRoot/usr/lib/dovecot/lib10_quota_plugin.so Dec 27 21:15:40 lda: Debug: Module loaded: /Applications/Server.app/Contents/ServerRoot/usr/lib/dovecot/lib20_fts_plugin.so Dec 27 21:15:40 lda: Debug: Module loaded: /Applications/Server.app/Contents/ServerRoot/usr/lib/dovecot/lib20_push_notify_plugin.so Dec 27 21:15:40 lda: Debug: Module loaded: /Applications/Server.app/Contents/ServerRoot/usr/lib/dovecot/lib20_zlib_plugin.so Dec 27 21:15:40 lda: Debug: Module loaded: /Applications/Server.app/Contents/ServerRoot/usr/lib/dovecot/lib21_fts_sk_plugin.so Dec 27 21:15:40 lda: Debug: Module loaded: /Applications/Server.app/Contents/ServerRoot/usr/lib/dovecot/lib90_sieve_plugin.so Dec 27 21:15:40 lda: Debug: auth input: graphicartist uid=214 gid=6 quota=maildir:User quota:noenforcing quota_rule=*:storage=0 mail=maildir:/Library/Server/Mail/Data/mail/B5E3E436-DEA0-4D5A-A5DF-34D6AB56FED6 mail_location=maildir:/Library/Server/Mail/Data/mail/B5E3E436-DEA0-4D5A-A5DF-34D6AB56FED6 sieve=/Library/Server/Mail/Data/rules/B5E3E436-DEA0-4D5A-A5DF-34D6AB56FED6/dovecot.sieve sieve_dir=/Library/Server/Mail/Data/rules/B5E3E436-DEA0-4D5A-A5DF-34D6AB56FED6 sieve_storage=/Library/Server/Mail/Data/rules/B5E3E436-DEA0-4D5A-A5DF-34D6AB56FED6 Dec 27 21:15:40 lda: Debug: Added userdb setting: plugin/quota=maildir:User quota:noenforcing Dec 27 21:15:40 lda: Debug: Added userdb setting: plugin/quota_rule=*:storage=0 Dec 27 21:15:40 lda: Debug: Added userdb setting: mail=maildir:/Library/Server/Mail/Data/mail/B5E3E436-DEA0-4D5A-A5DF-34D6AB56FED6 Dec 27 21:15:40 lda: Debug: Added userdb setting: mail_location=maildir:/Library/Server/Mail/Data/mail/B5E3E436-DEA0-4D5A-A5DF-34D6AB56FED6 Dec 27 21:15:40 lda: Debug: Added userdb setting: plugin/sieve=/Library/Server/Mail/Data/rules/B5E3E436-DEA0-4D5A-A5DF-34D6AB56FED6/dovecot.sieve Dec 27 21:15:40 lda: Debug: Added userdb setting: plugin/sieve_dir=/Library/Server/Mail/Data/rules/B5E3E436-DEA0-4D5A-A5DF-34D6AB56FED6 Dec 27 21:15:40 lda: Debug: Added userdb setting: plugin/sieve_storage=/Library/Server/Mail/Data/rules/B5E3E436-DEA0-4D5A-A5DF-34D6AB56FED6 Dec 27 21:15:40 lda(pid 20111 user graphicartist): Debug: Effective uid=214, gid=6, home= Dec 27 21:15:40 lda(pid 20111 user graphicartist): Debug: Quota root: name=User quota backend=maildir args=noenforcing Dec 27 21:15:40 lda(pid 20111 user graphicartist): Debug: Quota rule: root=User quota mailbox=* bytes=0 messages=0 Dec 27 21:15:40 lda(pid 20111 user graphicartist): Debug: Quota warning: bytes=0 (100%) messages=0 reverse=no command=quota-exceeded graphicartist Dec 27 21:15:40 lda(pid 20111 user graphicartist): Debug: maildir++: root=/Library/Server/Mail/Data/mail/B5E3E436-DEA0-4D5A-A5DF-34D6AB56FED6, index=, control=, inbox=/Library/Server/Mail/Data/mail/B5E3E436-DEA0-4D5A-A5DF-34D6AB56FED6, alt= Dec 27 21:15:40 lda(pid 20111 user graphicartist): Debug: Quota root: name=User quota backend=maildir args= Dec 27 21:15:40 lda(pid 20111 user graphicartist): Debug: Quota warning: bytes=0 (100%) messages=0 reverse=no command=quota-exceeded graphicartist Dec 27 21:15:40 lda(pid 20111 user graphicartist): Debug: none: root=, index=, control=, inbox=, alt= Dec 27 21:15:40 lda(pid 20111 user graphicartist): Debug: fts_sk: Disabled with in-memory indexes Dec 27 21:15:40 lda(pid 20111 user graphicartist): Debug: fts: No backends enabled by the fts setting Dec 27 21:15:40 lda(pid 20111 user graphicartist): Debug: Destination address: graphicartist(a)mini.mmpcrofton.com (source: user@hostname) Dec 27 21:15:40 lda(pid 20111 user graphicartist): Debug: auth input: graphicartist uid=214 gid=6 quota=maildir:User quota:noenforcing quota_rule=*:storage=0 mail=maildir:/Library/Server/Mail/Data/mail/B5E3E436-DEA0-4D5A-A5DF-34D6AB56FED6 mail_location=maildir:/Library/Server/Mail/Data/mail/B5E3E436-DEA0-4D5A-A5DF-34D6AB56FED6 sieve=/Library/Server/Mail/Data/rules/B5E3E436-DEA0-4D5A-A5DF-34D6AB56FED6/dovecot.sieve sieve_dir=/Library/Server/Mail/Data/rules/B5E3E436-DEA0-4D5A-A5DF-34D6AB56FED6 sieve_storage=/Library/Server/Mail/Data/rules/B5E3E436-DEA0-4D5A-A5DF-34D6AB56FED6 Dec 27 21:15:40 lda(pid 20111 user graphicartist): Debug: sieve: include: sieve_global_dir is not set; it is currently not possible to include `:global' scripts. Dec 27 21:15:40 lda(pid 20111 user graphicartist): Debug: sieve: user's script path /Library/Server/Mail/Data/rules/B5E3E436-DEA0-4D5A-A5DF-34D6AB56FED6/dovecot.sieve doesn't exist (using global script path in stead) Dec 27 21:15:40 lda(pid 20111 user graphicartist): Debug: sieve: user has no valid personal script Dec 27 21:15:40 lda(pid 20111 user graphicartist): Debug: sieve: no scripts to execute: reverting to default delivery. Anyone know why our emails are disappearing?

2 2

[Dovecot] Using -module flag on sieve libs
by Dimitri 26 Dec '12

26 Dec '12

Some modern distros (Mageia, Mandriva) use -no-undefined as a default linker flag for building software. However, undefined symbols are OK if the binary being linked is a plugin. To detect plugins, build system looks for presence of "-module" libtool flag in makefiles. There are two libraries in Pigeonhole that couldn't be linked with -no-undefined: src/lib-sieve/plugins/mailbox/libsieve_ext_mailbox.la src/lib-sieve/libdovecot-sieve.la These modules do contain undefined symbols, but they are not linked against library that provides them. It would be good if corresponding makefiles contained "-module" flags, so that build system could selectively turn off that -no-undefined linker flag. Please see proposed patch (attached). Thanks, Dimitri Mageia Linux packager

2 4

Re: [Dovecot] Dovecot 1.2.7 and Roundcube LIST-EXTENDED commands
by Aristidis Fesarlis 25 Dec '12

25 Dec '12

Anyone?

1 0

[Dovecot] Postfix/mysql/dovecot - Understanding password encryption
by Robert Moskowitz 25 Dec '12

25 Dec '12

I am switching from a fedora/postfix/mysql/couriermail/squirrelmail to Centos/.../dovecot/roundcubemail and adding postfixadmin to the mix. My tutorial before was an earlier version (on F14) of: http://www.howtoforge.com/virtual-users-and-domains-with-postfix-courier-my… Now I am using http://www.campworld.net/thewiki/pmwiki.php/LinuxServersCentOS/Cent6VirtMai… to get me started. I am up to roundcubemail setup and am stumbling to understand what the author here is doing with encrypted passwords, so felt it was time to delve deeper into this. My old setup uses mysql-crypt for the password. MYSQL_CRYPT_PWFIELD password and users could be added to the table with: INSERT INTO `users` (`email`, `password`, `quota`) VALUES ('sales(a)example.com', ENCRYPT('secret'), 10485760); But where this was all simple and no choices, I get to figure out what to do with my dovecot setup. Some of the 'secret' is hinted at in postfixadmin's config.inc.php: // Encrypt // In what way do you want the passwords to be crypted? // md5crypt = internal postfix admin md5 // md5 = md5 sum of the password // system = whatever you have set as your PHP system default // cleartext = clear text passwords (ouch!) // mysql_encrypt = useful for PAM integration // authlib = support for courier-authlib style passwords // dovecot:CRYPT-METHOD = use dovecotpw -s 'CRYPT-METHOD'. Example: dovecot:CRAM-MD5 $CONF['encrypt'] = 'md5crypt'; Where is there information on the different choices and how to choose. Is it as 'simple' as setting up postfixadmin to control the password encryption format then 'inform' dovecot in the dovecot-mysql.conf with default_pass_scheme = MD5-CRYPT Thank you for any pointers.

2 3

[Dovecot] Undeserved permissions error with g+s folder permissions
by tlhackque 24 Dec '12

24 Dec '12

I have a (mbox/IMAP) directory under my mail directory with these permissions: drwxrws--- 4 tlhackque mail 4096 Dec 1 10:34 Vendors/ It contains a subdirectory: -rw-rw---- 1 thlackque mail 84805345 Dec 1 10:34 Vendors/AVendor If I try to rename the AVendor folder (client is Thunderbird 17.0), I get this error: Unable to rename across conflicting directory permisssions If I chmod g-s Vendors, the RENAME command succeeds. I shouldn't have to do this... Version and configuration information: dovecot --version 2.1.10 # OS: Linux 2.6.22.14-72.fc6 i686 Fedora Core release 6 (Zod) first_valid_gid = 4000 first_valid_uid = 4000 hostname = example.net login_greeting = Dovecot ready. Unauthorized access is prohibited. mail_access_groups = mail mail_location = mbox:~/mail:INBOX=/var/mail/%n mail_privileged_group = mail namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = separator = / } passdb { driver = pam } plugin { autocreate = Trash autocreate2 = Train As Spam autocreate3 = Train As Ham autocreate4 = Train As Forgotten autosubscribe = Trash autosubscribe2 = Train As Spam autosubscribe3 = Train As Ham autosubscribe4 = Train As Forgotten } service imap-login { inet_listener imap { address = imap.v4.example.net imap.v6.example.net port = 143 } inet_listener imaps { address = imap.v4.example.net imap.v6.example.net port = 993 ssl = yes } } service pop3-login { inet_listener pop3 { address = pop.v4.example.net pop.v6.example.net port = 110 } inet_listener pop3s { address = pop.v4.example.net pop.v6.example.net port = 995 ssl = yes } } ssl_ca = </etc/pki/tls/certs/example_net_ca-cert-crl.pem ssl_cert = </etc/pki/tls/certs/servers-example-net.pem ssl_key = </etc/pki/tls/private/servers-example-net.pmk userdb { driver = passwd } protocol imap { imap_client_workarounds = tb-extra-mailbox-sep tb-lsub-flags mail_plugins = " autocreate" } protocol pop3 { mail_plugins = " autocreate" pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xv } -- This communication may not represent my employer's views, if any, on the matters discussed.

3 5

[Dovecot] Understanding Sockets
by Tim Smith 22 Dec '12

22 Dec '12

Hi, Just trying to consolidate my knowledge of Dovecot and I want to understand various things rather than just key out lines of config in dovecot.conf with the hope of it working. What I wanted to clarify is my understanding the "socket listen" section of the config file. From my limited understanding, this section details how other processes can access the userdb defined in Dovecot. The master socket is used for "internal" processes which is mainly dovecot-lda so that when Dovecot receives mail it knows where to deliver it and client is defined for "external" processes, for example Postfix who would use the info to determine if a user existed. Would you say this is a fair (albeit) dumbed down!!) synopsis of sockets and their purpose? Thanks in advance! Tim

6 10

[Dovecot] [Antispam]rev 990a43d44c73 breaks compilation for dovecot 2.1
by Simone Caruso 22 Dec '12

22 Dec '12

Dovecot 2.1.12 and antispam-plugin 0319240072d8 bash-# make Entering directory src. signature-log.c: In function 'signature_log_transaction_begin': signature-log.c:122: error: too many arguments to function 'dict_init' Failed to compile signature-log.c (plugin)! make[3]: *** [signature-log.plugin.o] Error 1 make[2]: *** [all] Error 2 make[1]: *** [src] Error 2 make: *** [all] Error 2 Reversing the deff the builing process ends with no error. -- Simone Caruso IT Consultant +39 349 65 90 805

1 0

Re: [Dovecot] migration to dovecot pop3
by Joseph Tam 21 Dec '12

21 Dec '12

Rajesh M writes: > i am planning to migrate from qmail pop3 to dovecot pop3 > > the number of users on the server is large over 5000 > ... > also data volume is large - over 3.5 tb -- ie many users several 1000s of > emails in their inbox If you stay on the list, you might find some people here whose mail metrics are several orders of magnitude larger than this. > 1) will the migration cause all the emails on the server to re-download > ... > 4) has anybody migrated from qmail pop3 to dovecot pop3 successfully > without emails being downloaded again A proper migration will avoid this. Google is your friend http://lmgtfy.com/q=POP+qmail+to+dovecot+migration The top hits provide exactly what you're looking for. > 2) can dovecot be configured to allow only one download at a time - pop3 > locking with time out setting that can be customized > > 3) can dovecot pop3 be configured so that it will allow download of emails > only of the last say 15 days ie even if the same pop3 user is configure on > another machine it will download only messages of the last 15 days I can't answer this, but if this is an attempt to prevent mass download, the answer to 1+4 makes these questions irrelevant. Joseph Tam <jtam.home(a)gmail.com>

3 2

Re: [Dovecot] dovecot Digest, Vol 116, Issue 38
by Douglas Mortensen 21 Dec '12

21 Dec '12

Austinator, What's the JLG maintenance schedule? I should show you how to setup a CW Service Template & then you can have it as a weekly ticket. :-) - Doug Mortensen Impala Networks Sent from my Windows Phone ________________________________ From: dovecot-request(a)dovecot.org<mailto:dovecot-request@dovecot.org> Sent: ‎12/‎21/‎2012 1:44 AM To: dovecot(a)dovecot.org<mailto:dovecot@dovecot.org> Subject: dovecot Digest, Vol 116, Issue 38 Send dovecot mailing list submissions to dovecot(a)dovecot.org To subscribe or unsubscribe via the World Wide Web, visit http://dovecot.org/cgi-bin/mailman/listinfo/dovecot or, via email, send a message with subject or body 'help' to dovecot-request(a)dovecot.org You can reach the person managing the list at dovecot-owner(a)dovecot.org When replying, please edit your Subject line so it is more specific than "Re: Contents of dovecot digest..."

1 0

[Dovecot] Non-dovecot user looking for feedback
by Chris Ross 21 Dec '12

21 Dec '12

I've been using UW-IMAPd for neigh on forever (at least since 2001). But, as it's basically stalled, and I'm about to update the hardware that is my mail server, I thought it was time to review existing open-source IMAP servers. Dovecot is the top three in my looking. The other of the top three candidates, because I know of people who've used it, is Cyrus IMAP. So, I should note that my thoughts are "uw-imapd, because I already know how to use it", "Cyrus, because someone I know/trust liked it years ago", and dovecot, because "it seems stable, professional, and to meet all of my needs". I guess the biggest question I have is how files/folders are stored in the filesystem. uw-imapd has a "mbx" format that all of my folders are in, and also has support for mbox and maildir (i think). mbx had some advantages for speed access, which would be unimportant I assume with dovecot's indexes, but IIRC there was also some reason the mbox format coped poorly with multiple clients accessing the same folder at the same time. So, am I right that dovecot supports only the "one big full file" mbox format, and the maildir format? And if so, is it known to allow multiple simultaneous IMAP clients to access and monitor and/or modify the same folder simultaneously? After those questions, it's just a "what do you think the pros and cons of each are?" I know asking in this forum, that I will get most if not all votes for Dovecot. And that's fine, as long as you have specific reasons why it would be better for someone with only a handful of users and minimal time available to administer the systems in question. Thanks! I appreciate any and all feedback. - Chris

5 5

[Dovecot] doveadm-lda - segfault
by kjonca＠o2.pl 20 Dec '12

20 Dec '12

I have simple old message: --8<---------------cut here---------------start------------->8--- X-Mozilla-Status: 0011 X-Mozilla-Status2: 00000000 Date: Wed, 26 Jan 2000 13:38:41 +0100 From: Kamil Jonca <kjonca(a)localhost.localdomain> To: Somebody X <xx(a)tiger.com.pl> Subject: Re: Opisy Message-ID: <20000126133839.B2888(a)localhost.localdomain> References: <Pine.LNX.4.05.10001261335010.19250-100000(a)aa.bbb.ccc> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-2 Content-Transfer-Encoding: 8bit X-Mailer: Mutt 0.95.5us In-Reply-To: <Pine.LNX.4.05.10001261335010.19250-100000(a)xxx.yyy.cc>; from Somebody X on Wed, Jan 26, 2000 at 01:37:52PM +0000 X-Operating-System: 'Linux localhost.localdomain 2.2.9-27mdk #1 Mon Jan 24 15:49:34 CET 2000 i686 unknown' X-Geek: GIT d s+:- a-- C++ UL P+ L++ E W N+ w- PS+ PE++ PGP t-- X-- R- tv- b+ D+ G e h-- r- z? Lines: 30 X-KJONCA-Clamav-Status: No jd;fladflsd;lc dfgn;sdhgfad abffhahgl fadn;al sdfnad;hfa fna;lhfla -- shfkah --8<---------------cut here---------------end--------------->8--- When I try to dovecot-lda < message.txt (for sieve refiltering) I got segmentation fault. Does it is bug in lda, or message does not keep standards? KJ -- http://modnebzdury.wordpress.com/2009/10/01/niewiarygodny-list-prof-majewsk… Sanity and insanity overlap a fine grey line.

4 7