- dovecot - dovecot.org

Re: [Dovecot] POP3 protection
by Jos Chrispijn 03 Dec '06

03 Dec '06

Odhiambo WASHINGTON: > Okay, Jos is just starting up administering e-mail services. One server, > 79 users max ;) Oke, i got the message; I am a simple home user with an _out_of_hand hobby and no commercial squils @ all :-) > SQL>update users set pop3 = '0' where username = 'jos(a)domain.tld'; > > That is faster than > cd /some/directory/path > vi somefilename > add entries > restart daemon (perhaps) You are quite right. But I still have some bad feelings about an extra sql database cause if this server is offline, my whole mailsystem is down. I fixed my problem with: http://wiki.dovecot.org/Authentication/RestrictAccess It works (thanks Jack and Timo) but now I have another little problem to solve (chaos theory lives!) > Over to you, Jos. I hope that my stupid questions still make sense after all <grin> Jos

1 0

Re: [Dovecot] Can't drop root group privileges
by Jackie Hunt 03 Dec '06

03 Dec '06

An update on my problem dropping root group privileges. I discovered this is a problem for a user if they are in the system group (gid 0). If I remove the user from the system group, and leave them in their primary group, I don't see the error. I've tried setting first_valid_gid to something like 4, hoping dovecot would filter out gid 0, but that doesn't work. Still searching for an answer... Jackie > > Hi all, > > I need your insight. I've been testing Dovecot on an AIX 5.2 > system. Compiled and running fine. We have some users on an > AIX 5.1 system, so I'm working on installing it there, so we > can do further testing. > > I'm using Dovecot 1.0 RC15 with OpenSSL 9.0.7e, configured to use > port 10143 (imap) and 10993 (imaps). The error I'm seeing in the log is: > > dovecot: Nov 28 09:23:54 Info: imap-login: Login: user=<jackie>, method=PLAIN, r > ip=xx.x.xxx.xxx, lip=xxx.xx.xxx.xx, TLS > dovecot: Nov 28 09:23:54 Error: IMAP(jackie): We couldn't drop root group privil > eges (wanted=200, gid=200, egid=0) > dovecot: Nov 28 09:23:54 Error: child 860274 (imap) returned error 89 > > I've seen this error reported on the list, with the suggested resolution > being to set the first_valid_gid = 0 in dovecot.conf. I've tried that, > and nothing changes. > > Any help would be greatly appreciated! > > Jackie > --- > Jackie Hunt > ACNS Voice: (970) 663-3789 > Colorado State University FAX: (970) 491-1958 > Fort Collins, CO 80523 Email: jackie.hunt(a)colostate.edu > Jackie Hunt ACNS Voice: (970) 663-3789 Colorado State University FAX: (970) 491-1958 Fort Collins, CO 80523 Email: jackie.hunt(a)colostate.edu

2 2

Re: [Dovecot] Marking all messages in folder as read doesn't work
by John and Catherine Allen 03 Dec '06

03 Dec '06

> > My only guess is that the imap process doesn't have permissions to > rename the files. >This seems plausible. I'll have another look at the permissions. Timo, On this specific point I cannot see anything wrong on my system. The maildir folders all have permissions 0700 and the messages in all folders 0600. Owner and group are the same throughout all my folders. John -- John Allen Bofferdange, Luxembourg allen(a)vo.lu http://www.homepages.lu/allen

1 0

[Dovecot] small mbox and index files problem
by Paul Shackel 03 Dec '06

03 Dec '06

Dovecot version: 1.0-0_33.rc15 built by atrpms Operating system: Redhat EL4 CPU architecture: x86 Filesystem you used: mailboxs via nfs to fileserver using xfs Just upgraded from 1.0-0_20.rc7 to 1.0-0_33.rc15 built by atrpms and we had previously set mbox_min_index_size to 1024 (1Mb) and now all mailboxes (mbox format) that are under this size are not able to be opened and throw an "Internal error occured. Refer to server log for more information." using either Thunderbird or Outlook Express, both of which are recent versions. The small mailboxes can be opened after turning mbox_min_index_size setting back to 0, at which time it creates indexes. There is nothing in the syslog file. I am looking in the right place as I can see the dovecot startup message. paul --

3 2

[Dovecot] Inactivity, Thunderbird -> bad password
by Peter Veerman 03 Dec '06

03 Dec '06

Hi, I'm running dovecot rc13 now on sparc64, freebsd 6.1-STABLE When i'm connected with my 5 accounts to my dovecot imap over ssl/tls server i get the following message in my logs: Nov 18 15:25:47 Info: imap-login: Disconnected: Inactivity: rip=x.x.x.x, lip=x.x.x.x, TLS My client (thunderbird) then re-requests my password for only one of the 5 accounts. In my dovecot.conf is the following variable set: imap_client_workarounds = delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep

2 8

[Dovecot] Loging folder based information etc?
by Mart Pirita 03 Dec '06

03 Dec '06

Hello. Today one user lost Sent Items folder, seems he deleted it, but I want to be sure. But how? Right now I'm using: login_log_format_elements = %u [%r] %m %c What should I use to see in logs information about created/deleted folders etc? -- Mart

2 1

[Dovecot] Freebsd: fs quota / big maildir
by Geoffroy Desvernay 03 Dec '06

03 Dec '06

I'm testing dovecot as courier-imap replacement. My setup: FreeBSD 6.1 nfs homedirs on FreeBSD server ~/Maildir 's LDAP auth - bind_auth=yes Seems to work well in most cases, but: - No way to read a maildir with 35000+ messages (a freebsd mailing-list for some years) => Nov 21 12:11:42 host dovecot: child 7217 (imap) killed with signal 11 - No way to have quota plugin reporting anything => quotactl(Q_GETQUOTA, /users/group) failed: Operation not supported Any idea ? What did I forget ? What could I do to debug this ? (mail_debug = yes) -- ___________________________________________________________ / Geoffroy DESVERNAY | \ /\ `Service info` | Tel: (+33|0)4 91 05 45 24 /\ \/ Ecole Centrale de Marseille | Fax: (+33|0)4 91 05 45 98 \/ \ (ex-EGIM) | Mail: dgeo(a)ec-marseille.fr / -----------------------------------------------------------

3 3

[Dovecot] Caching passwords?
by Hein Celliers 03 Dec '06

03 Dec '06

Hi all! I need some help....changing passwords....... Dovecot server, appears to cache the old credentials. It only discovers the change upon a restart. I need to know how to configure dovecot (dovecot-1.0-0.beta2.7) as not to cache the passwords. (Using fedora core 5) Thanks Hein Celliers

2 1

Re: [Dovecot] dovecot:IMAP(user) killed with signal 6
by Spil Oss 03 Dec '06

03 Dec '06

Thanks Timo! Since I've been running rc10 again dovecot stopped aborting. By the way, when I used the create_shares.pl script, it created a symlink for every file in the directory to be shared. Simple symlinking the dir seemed to 'almost' work but for the keyword file errors. Upgrading to rc15 fixes the problem as well, the Permission Denied message still comes up, but dovecot no longer aborts. Will try the create_shares.pl script again and see where my symlink-config is wrong. FWIW I wouldn't want any undocumented behaviour in dovecot just because I'm a stupid twat... Kind regards, Spil. On 20/11/06, Spil Oss <spil.oss(a)googlemail.com> wrote: > That's indeed very standard, but it was complaining before (up to > rc10) but not aborting. > > Dovecot keeps resetting the mode and owner on the keyword file > > lrwxr-xr-x 1 user1 user 37 Nov 9 21:48 .MeldWelSpam -> > /home/sharedmail/Maildir/.MeldWelSpam > > $ ls -l /home/sharedmail/Maildir/.MeldWelSpam > total 68 > drwxrwx--- 2 sharedmail sharedmail 1024 Nov 16 16:49 cur > -rw------- 1 user2 sharedmail 50 Nov 16 16:49 dovecot-keywords > -rwxrws--- 1 sharedmail sharedmail 0 Oct 17 15:01 dovecot-shared > -rw-rw---- 1 user2 sharedmail 12451 Nov 16 16:49 dovecot-uidlist > -rw-rw---- 1 sharedmail sharedmail 712 Nov 16 16:51 dovecot.index > -rw-rw---- 1 sharedmail sharedmail 17408 Oct 17 14:58 dovecot.index.cache > -rw-rw---- 1 sharedmail sharedmail 26436 Nov 16 16:51 dovecot.index.log > -rwxrws--- 1 sharedmail sharedmail 0 Oct 17 14:39 maildirfolder > drwxrwx--- 2 sharedmail sharedmail 512 Nov 14 21:41 new > drwxrwx--- 2 sharedmail sharedmail 1536 Nov 16 16:49 tmp > > It seems that whoever gets there first, creates the dovecot-keywords > file with perms 600 and subsequent users of the shared folder are out > of luck. > > # chown sharedmail:sharedmail dovecot-keywords dovecot-uidlist ; chmod > 660 dovecot-keywords > #ls -l dovecot-keywords dovecot-uidlist > -rw-rw---- 1 sharedmail sharedmail 50 Nov 16 16:49 dovecot-keywords > -rw-rw---- 1 sharedmail sharedmail 12451 Nov 16 16:49 dovecot-uidlist > > Moving some folders into the MeldWelSpam folder as user1 > # ls -l dovecot-keywords dovecot-uidlist > -rw------- 1 user1 sharedmail 258 Nov 16 16:57 dovecot-keywords > -rw-rw---- 1 user1 sharedmail 12736 Nov 16 16:57 dovecot-uidlist > > As long as dovecot keeps setting the mode to 600, I can't see how I > get this fixed. > > Spil. > > On 16/11/06, Odhiambo WASHINGTON <odhiambo.raburu(a)wananchi.com> wrote: > > * On 16/11/06 16:17 +0100, Spil Oss wrote: > > | Just upgraded to rc14 and problem persists. > > | > > | On 16/11/06, Spil Oss <spil.oss(a)googlemail.com> wrote: > > | >Hi all, > > | > > > | >After rc10 I have problems with imap and imaps > > | > > > | >Hi all, > > | > > > | >After rc10 I have problems with imap and imaps > > | > > > | >Nov 16 15:42:39 beastie dovecot: IMAP(user1): > > | >open(/home/user1/Maildir/.MeldWelSpam/dovecot-keywords) failed: > > | >Permission denied > > | >Nov 16 15:44:09 beastie dovecot: IMAP(user2): > > | >open(/home/user2/Maildir/.MeldWelSpam/dovecot-keywords) failed: > > | >Permission denied > > | >Nov 16 15:44:09 beastie dovecot: IMAP(user2): file maildir-keywords.c: > > | >line 222 (maildir_keywords_lookup_or_create): assertion failed: > > | >(mk->synced) > > | >Nov 16 15:44:09 beastie dovecot: child 98798 (imap) killed with signal 6 > > | >Nov 16 15:46:10 beastie dovecot: IMAP(user2): > > | >open(/home/user2/Maildir/.MeldWelSpam/dovecot-keywords) failed: > > | >Permission denied > > | >Nov 16 15:46:10 beastie dovecot: IMAP(user2): file maildir-keywords.c: > > | >line 222 (maildir_keywords_lookup_or_create): assertion failed: > > | >(mk->synced) > > | >Nov 16 15:46:10 beastie dovecot: child 98819 (imap) killed with signal 6 > > | > > > | >The Permission denied messages where there in rc10 as well, but that > > | >was not causing problems. These folders are symlinks to shared spam > > | >and ham folders for spamassassin learning. > > | > > > | >Any clue on how to fix this? > > | > > > | >FreeBSD-i386 6.1-RELEASE-p10 > > | >dovecot-1.0.r13 from ports > > > > "Permission Denied" is such a straight error message that you should be > > able to figure out and fix, everything being standard[1] > > > > What are the permissions on that folder (.MeldWelSpam)? > > Is it really owned by user2? > > Dovecot wants to write to it, but is being denied that chance. It should > > be writable by dovecot, I believe. So that folder should be group > > writable and dovecot should be in that group. > > > > But again, perhaps we should see the permissions on the dovecot binary > > also, because dovecot should be writing there "as user2" (suid), yes? > > > > > > [1] I suppose you are installing dovecot using the ports tree and that > > you have not tweaked your box beyond your own comprehension. > > I don't see > > > > > > -Wash > > > > http://www.netmeister.org/news/learn2quote.html > > > > DISCLAIMER: See http://www.wananchi.com/bms/terms.php > > > > -- > > +======================================================================+ > > |\ _,,,---,,_ | Odhiambo Washington <wash(a)wananchi.com> > > Zzz /,`.-'`' -. ;-;;,_ | Wananchi Online Ltd. www.wananchi.com > > |,4- ) )-,_. ,\ ( `'-'| Tel: +254 20 313985-9 +254 20 313922 > > '---''(_/--' `-'\_) | GSM: +254 722 743223 +254 733 744121 > > +======================================================================+ > > > > Garbage In -- Gospel Out. > > >

2 1

[Dovecot] Problem with rc10, perhaps 11-15
by Steven F Siirila 03 Dec '06

03 Dec '06

I don't recall if I mentioned this on the list, but when you are configured with mbox format, and a user has no Dovecot index files yet, and the config is such that mbox_min_index_size is set to non-zero, non-default (128 in my test case), dovecot deliver fails. Commenting out "mbox_min_index_size" fixed the problem, and the indexes then get created. This problems exists in RC10 -- I'm mentioned this in case it still exists in the latest revs so it can get fixed before release. -- Steven F. Siirila Office: Lind Hall, Room 130B Internet Services E-mail: sfs(a)umn.edu Office of Information Technology Voice: (612) 626-0244 University of Minnesota Fax: (612) 626-7593

2 1

[Dovecot] IMAPS works, IMAP does not
by Peter Lindgren 03 Dec '06

03 Dec '06

Hello! I have a simple (I think) problem. I have had IMAPS working fine for a long time. Now I want to start to use IMAP and STARTLS, since my mobile SonyEricsson P900 can't use IMAPS directly. But I can't connect even locally to the IMAP port (143), no-one listens there according to netstat (*.imaps is in LISTEN state). I have the following settings in my /etc/dovecot.conf: protocols = imap imaps ssl_cert_file = /etc/ssl/dovecotcert.pem ssl_key_file = /etc/ssl/private/dovecot.pem disable_plaintext_auth = no login_user = _dovecot login_greeting = Dovecot@casiopea ready. mail_read_mmaped = yes mmap_no_write = no protocol imap { login_greeting_capability = yes } protocol pop3 { } auth_verbose = yes auth default { mechanisms = cram-md5 digest-md5 passdb passwd { } userdb passwd { } user = root } I have restarted (SIGTERM) dovecot to be sure that dovecot is restarted. I still run 1.0beta3 on OpenBSD. TIA, Peter -- Peter Lindgren, dataingenjör E-post: peter "at" norrskenkonsult punkt com http://www.norrskenkonsult.com

2 1

[Dovecot] shared folder
by T. Horsnell 03 Dec '06

03 Dec '06

The dovecot wiki says: The only way to implement shared folders with Dovecot 0.99.x is to create a "shared userid" which all of the users log in to read mail. Does this mean that folders owned by that shared uid can be *simultaneously* manipulated by multiple users logged in to that shared uid? This doesnt seem to be the case on my dovecot-0.99.11-4.EL4 system, and before investigating further I just wanted to check whether it should be possible or not. Cheers, Terry.

2 1

[Dovecot] Nested folders in FS supported yet?
by Sweth Chandramouli 03 Dec '06

03 Dec '06

The last time I checked, dovecot didn't support having nested IMAP folders be implemented via actual nested maildir folders in the filesystem, but that feature was on the "someday maybe it'll happen list", IIRC. I can't find any recent mention of that feature or its absence on the web or in the list archives; is it still on the someday list? (If it isn't implemented yet, does anyone know of an IMAP server that DOES support it?) Thanks, Sweth. -- Sweth Chandramouli sweth(a)ethicalhomes.com - http://EthicalHomes.com/ Thinking about buying a home, but feel like the local real estate market has left you behind? Know others who have the same questions? I teach at homebuying seminars for local housing agencies, and would be glad to help set up a free seminar for your company or organization.

3 2

[Dovecot] Heimdal & gssapi.h
by Chris Wakelin 03 Dec '06

03 Dec '06

I've had some trouble compiling GSSAPI on SuSE Enterprise 9 using Heimdal. It turns out that this installation has /usr/include/heimdal/gssapi.h rather than gssapi/gssapi.h. krb5-config correctly sets -I/usr/include/heimdal in the CFLAGS. Looking back, there was a similar issue a few months ago:- http://www.dovecot.org/list/dovecot/2006-July/014945.html I'm a complete newbie to autotools but here's my attempt at a patch inspired by http://ximbiot.com/cvs/cvshome/dev/patches/gss - which I Googled for ;) I was hampered by the version of aclocal (and possibly the rest of autotools) being out-of-date on SuSE Enterprise 9 ... Chris -- --+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+- Christopher Wakelin, c.d.wakelin(a)reading.ac.uk IT Services Centre, The University of Reading, Tel: +44 (0)118 378 8439 Whiteknights, Reading, RG6 2AF, UK Fax: +44 (0)118 975 3094 --- dovecot-1.0.rc15/configure.in.orig 2006-11-18 23:41:31.000000000 +0000 +++ dovecot-1.0.rc15/configure.in 2006-11-28 15:25:16.889043097 +0000 @@ -1438,6 +1438,12 @@ CFLAGS="$CFLAGS `krb5-config --cflags gssapi`" AC_CHECK_HEADER([gssapi/gssapi.h], [ AC_DEFINE(HAVE_GSSAPI,, Build with GSSAPI support) + AC_DEFINE(HAVE_GSSAPI_GSSAPI_H,, GSSAPI headers in gssapi/gssapi.h) + have_gssapi=yes + ]) + AC_CHECK_HEADER([gssapi.h], [ + AC_DEFINE(HAVE_GSSAPI,, Build with GSSAPI support) + AC_DEFINE(HAVE_GSSAPI_H,, GSSAPI headers in gssapi.h) have_gssapi=yes ]) CFLAGS=$old_CFLAGS --- dovecot-1.0.rc15/config.h.in.orig 2006-11-18 23:42:14.000000000 +0000 +++ dovecot-1.0.rc15/config.h.in 2006-11-28 15:27:24.584537526 +0000 @@ -75,6 +75,12 @@ /* Build with GSSAPI support */ #undef HAVE_GSSAPI +/* GSSAPI headers in gssapi/gssapi.h */ +#undef HAVE_GSSAPI_GSSAPI_H + +/* GSSAPI headers in gssapi.h */ +#undef HAVE_GSSAPI_H + /* Define if you have the iconv() function. */ #undef HAVE_ICONV --- dovecot-1.0.rc15/src/auth/mech-gssapi.c.orig 2006-09-22 15:55:18.000000000 +0100 +++ dovecot-1.0.rc15/src/auth/mech-gssapi.c 2006-11-28 15:37:25.733077117 +0000 @@ -24,7 +24,13 @@ #ifdef HAVE_GSSAPI +#ifdef HAVE_GSSAPI_H +#include <gssapi.h> +#endif + +#ifdef HAVE_GSSAPI_GSSAPI_H #include <gssapi/gssapi.h> +#endif /* Non-zero flags defined in RFC 2222 */ enum sasl_gssapi_qop {

2 1

[Dovecot] dovecot-1.0.rc15 with quota-rewrite on FreeBSD
by Félix Langelier 03 Dec '06

03 Dec '06

Hello, I tried to compile dovecot rc15 from the sources with the quota-rewrite patch (http://dovecot.org/patches/1.0/quota-rewrite.diff) on FreeBSD 6.1, but the compilation stop with the following errors. I am not very good in coding, so if you could fix the patch for FreeBSD it will be great. Making all in trash if /usr/local/bin/bash ../../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../.. -I../../../src/lib -I../../../src/lib-mail -I../../../src/lib-storage -I../../../src/plugins/quota -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT trash-plugin.lo -MD -MP -MF ".deps/trash-plugin.Tpo" -c -o trash-plugin.lo trash-plugin.c; then mv -f ".deps/trash-plugin.Tpo" ".deps/trash-plugin.Plo"; else rm -f ".deps/trash-plugin.Tpo"; exit 1; fi mkdir .libs gcc -DHAVE_CONFIG_H -I. -I. -I../../.. -I../../../src/lib -I../../../src/lib-mail -I../../../src/lib-storage -I../../../src/plugins/quota -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT trash-plugin.lo -MD -MP -MF .deps/trash-plugin.Tpo -c trash-plugin.c -fPIC -DPIC -o .libs/trash-plugin.o trash-plugin.c:103: warning: "struct quota_root_transaction_context" declared inside parameter list trash-plugin.c:103: warning: its scope is only this definition or declaration, which is probably not what you want trash-plugin.c: In function `trash_try_clean_mails': trash-plugin.c:118: error: dereferencing pointer to incomplete type trash-plugin.c: At top level: trash-plugin.c:183: warning: "struct quota_root_transaction_context" declared inside parameter list trash-plugin.c: In function `trash_quota_root_try_alloc': trash-plugin.c:185: error: dereferencing pointer to incomplete type trash-plugin.c:189: error: structure has no member named `try_alloc' trash-plugin.c: At top level: trash-plugin.c:212: warning: "struct quota_root_transaction_context" declared inside parameter list trash-plugin.c: In function `trash_quota_root_try_alloc_bytes': trash-plugin.c:214: error: dereferencing pointer to incomplete type trash-plugin.c:218: error: structure has no member named `try_alloc_bytes' trash-plugin.c: At top level: trash-plugin.c:236: warning: "struct quota_root_transaction_context" declared inside parameter list trash-plugin.c: In function `trash_quota_root_test_alloc_bytes': trash-plugin.c:238: error: dereferencing pointer to incomplete type trash-plugin.c:242: error: structure has no member named `test_alloc_bytes' trash-plugin.c: In function `trash_quota_root_created': trash-plugin.c:277: error: structure has no member named `v' trash-plugin.c:278: error: structure has no member named `v' trash-plugin.c:279: error: structure has no member named `v' trash-plugin.c:280: error: structure has no member named `v' trash-plugin.c:281: error: structure has no member named `v' *** Error code 1 Stop in /usr/home/felix.langelier/sources/dovecot-1.0.rc15/src/plugins/trash. *** Error code 1 Stop in /usr/home/felix.langelier/sources/dovecot-1.0.rc15/src/plugins. *** Error code 1 Stop in /usr/home/felix.langelier/sources/dovecot-1.0.rc15/src. *** Error code 1 Stop in /usr/home/felix.langelier/sources/dovecot-1.0.rc15. *** Error code 1 Stop in /usr/home/felix.langelier/sources/dovecot-1.0.rc15. Thanks in advance. -- Felix Langelier

2 1

[Dovecot] Can't remove folder
by Leroy van Logchem 03 Dec '06

03 Dec '06

Hello, Here is a 'me too' somewhat like: http://www.dovecot.org/list/dovecot/2006-January/010759.html Example scenario: /u/username/Mail/subfolder/somebox subfolder is a directory somebox is a mbox When I use Thunderbird's "Delete folder" function on the somebox the message appears: "Target mailbox doesn't allow inferiour mailboxes". Thunderbird, by default, tries to move it to Trash instead of deleting it directly. When I change the preference to "Remove it immediately" it works. Which component is at fault here: - limitation of a mbox only setup? - thunderbird should know - limitation of the imap protocol to advice the client it's mbox backed - feature of dovecot, could it be fixed or worked around somehow -- Leroy

2 1

[Dovecot] Logging
by Steven F Siirila 03 Dec '06

03 Dec '06

In trying to determine why someone was unable to use port 110 w/STLS (POP) I had great difficulty finding the session in which the user switched to this port from using port 995. This is because Dovecot does not log any port number information. Furthermore, it isn't obvious to me if it logs whether a session was negotiated SSL (via STARTTLS w/IMAP or STLS w/POP) or started out SSL (ports 993 and 995). If this seems reasonable, I can whip up a patch to log this information. However, I'd rather see Dovecot 1.0 released first. -- Steven F. Siirila Office: Lind Hall, Room 130B Internet Services E-mail: sfs(a)umn.edu Office of Information Technology Voice: (612) 626-0244 University of Minnesota Fax: (612) 626-7593

2 1

[Dovecot] authentication
by eric 03 Dec '06

03 Dec '06

Good evening from Aotearoa; First some details: Clients are all Outlook2003 on XP yawn Server is Suse 9.3 Samba, postfix, fetchmail and dovecot 1.0 rc13 I succesfully installed Dovecot on my test network at home, but at the job site its a mystery. I seem to be able to get one client to authenticate but not another. And only if i created a password file consisting of logins and no passwords. Dovecot won't use standard unix passwd successfully. So here is the conf: base_dir = /var/run/dovecot/ protocols = pop3 listen = *:110 disable_plaintext_auth = no ssl_listen = ssl_disable = yes login_dir = /var/run/dovecot/login login_user = dovecot login_greeting = Dovecot ready. mail_extra_groups = users mail last_valid_uid = 2000 pop3_uidl_format = %08Xu%08Xv protocol lda { # Address to use when sending rejection mails. postmaster_address = postmaster(a)example.com } auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@ auth_debug_passwords = yes auth default { mechanisms = plain passdb passwd-file { args = /usr/local/etc/passwords } userdb passwd { } user = root default_mail_env = mbox:/var/spool/mail/:INBOX=/var/spool/mail/%u And here is a sample of two of the syslogs.: I am not worried about the UID warning,I was try to login on from various clients. Though this is not a requirement. Sample of Mail log Nov 30 18:30:27 SCSIServer dovecot: POP3(user): Couldn't open INBOX: Internal error occurred. Refer to server log for more information. [2006-11-30 18:30:27] Nov 30 18:19:50 SCSIServer dovecot: pop3-login: Login: user=<user1>, method=PLAIN, rip=192.168.1.113, lip=192.168.1.199 Nov 30 18:19:50 SCSIServer dovecot: POP3(user1): UIDVALIDITY changed (1164764972 -> 1164774199) in mbox file /var/spool/mail/user1 Nov 30 18:19:50 SCSIServer dovecot: POP3(user1): Disconnected: Mailbox is in inconsistent state. top=0/0, retr=0/0, del=0/0, size=0 Nov 30 18:20:04 SCSIServer dovecot: auth(default): client in: AUTH 1 PLAIN service=POP3 lip=192.168.1.199 rip=192.168.1.113 resp=AG9saXZpYQA= Nov 30 18:20:46 SCSIServer dovecot: pop3-login: Login: user=<user2>, method=PLAIN, rip=192.168.1.115, lip=192.168.1.199 Nov 30 18:20:46 SCSIServer dovecot: POP3(user2): open() failed with index file /var/spool/mail/.imap/INBOX/dovecot.index: Permission denied Nov 30 18:20:46 SCSIServer dovecot: POP3(user2): open() failed with index file /var/spool/mail/.imap/INBOX/dovecot.index: Permission denied Nov 30 18:20:46 SCSIServer dovecot: POP3(user2): Couldn't open INBOX: Internal error occurred. Refer to server log for more information. Warn log; Nov 30 18:30:27 SCSIServer dovecot: POP3(user2): open() failed with index file /var/spool/mail/.imap/INBOX/dovecot.index: Permission denied Nov 30 18:30:27 SCSIServer dovecot: POP3(user2): Couldn't open INBOX: Internal error occurred. Refer to server log for more information. [2006-11-30 18:30:27] It just occured to me these leading blanks in the conf file may effect, I am sure I read that somewhere to do with one of these things? Any other ideas would be greatly appreciated.

2 1

[Dovecot] mysql +update
by SysOp 03 Dec '06

03 Dec '06

Hi all, how to put in databaswe (mysql) some information after login dovecot can only get information from database (user_query, password_query) exist some query to put in, for example last login date into database ? Maciek

2 1

[Dovecot] method= in log file
by Luigi Rosa 03 Dec '06

03 Dec '06

In Dovecot log I have: Nov 30 20:35:16 xx dovecot: pop3-login: Login: user=<xxx>, method=PLAIN, rip=x.x.x.102, lip=y.y.y.53 Nov 30 20:35:16 xx dovecot: imap-login: Login: user=<xxx>, method=plain, rip=x.x.x.102, lip=y.y.y.53 Apart the protocol (IMAP and POP3) is there a difference between "method=PLAIN" and "method=plain"? Ciao, luigi -- / +--[Luigi Rosa]-- \ 667: The neighbor of the beast.

2 1

[Dovecot] Problems using Squirrelmail / Dovecot / Sendmail / Fedora Core 6 - ERROR: Connection dropped by IMAP server
by Alexander Lapajne 03 Dec '06

03 Dec '06

Hello I just installed Fedora Core 6 and I'm having problems with SquirrelMail. I'm using Squirrelmail/Dovecot/Sendmail and when I log into Squirrelmail and try to view any folder that contains any messages I get: ERROR: Connection dropped by IMAP server. Query: SORT (ARRIVAL) ISO-8859-1 ALL Now, I've tried to disable server side sorting in Squirrelmail but that only leads to a new error message: ERROR: Connection dropped by IMAP server. Query: FETCH 1:* (FLAGS UID RFC822.SIZE INTERNALDATE BODY.PEEK[HEADER.FIELDS (Date To Cc From Subject X-Priority Importance Priority Content-Type)]) I'm using the default setup and POP3 mail is working. Using Thunderbird I can read email using POP3. So the problem only appears when using Squirrelmail. I had the exact same setup in Fedora Core 5 and it was working perfectly. Same config files and everything. _________________________________________________________ Flyger tiden iväg? Fånga dagen med Yahoo! Mails inbyggda kalender. Dessutom 250 MB gratis, virusscanning och antispam. Få den på: http://se.mail.yahoo.com

2 1

[Dovecot] Auth process died too early
by Kenny Dail 03 Dec '06

03 Dec '06

Hello all, Trying an Install of Dovecot 1.0rc15. We have previously used 1.0b8 without too many troubles. starting Dovecot 1.0rc15 yields: Dec 1 16:31:08 mailtest1 dovecot: Dovecot v1.0.rc15 starting up Dec 1 16:31:09 mailtest1 dovecot: pop3-login: Aborted login: rip=172.30.0.3, lip=172.30.0.30 Dec 1 16:31:09 mailtest1 dovecot: Auth process died too early - shutting down Dec 1 16:31:09 mailtest1 dovecot: auth(default): Socket already exists: /var/run/dovecot/auth-client Dec 1 16:31:09 mailtest1 last message repeated 7 times Dec 1 16:31:09 mailtest1 dovecot: child 14664 (auth) returned error 89 Dec 1 16:31:09 mailtest1 dovecot: child 14665 (auth) returned error 89 Dec 1 16:31:09 mailtest1 dovecot: child 14666 (auth) returned error 89 Dec 1 16:31:09 mailtest1 dovecot: child 14667 (auth) returned error 89 Dec 1 16:31:09 mailtest1 dovecot: child 14668 (auth) returned error 89 Dec 1 16:31:09 mailtest1 dovecot: child 14669 (auth) returned error 89 Dec 1 16:31:09 mailtest1 dovecot: child 14670 (auth) returned error 89 Dec 1 16:31:09 mailtest1 dovecot: child 14671 (auth) returned error 89 Dec 1 16:31:09 mailtest1 dovecot: child 14672 (auth) returned error 89 Dec 1 16:31:09 mailtest1 dovecot: auth(default): Socket already exists: /var/run/dovecot/auth-client Dec 1 16:31:09 mailtest1 dovecot: Temporary failure in creating login processes, slowing down for now Dec 1 16:31:09 mailtest1 dovecot: I/O leak: 0x804d720 (47) and then it dies. Any thoughts on that which I am doing wrong? dovecot.conf currently looks like such: protocols = imap imaps pop3 pop3s disable_plaintext_auth = no login_greeting = amigo.net ready. mail_location = maildir:%h/Maildir namespace private { separator = . prefix = INBOX. inbox = yes hidden = no } mail_extra_groups = mail mmap_disable = yes lock_method = dotlock first_valid_uid = 465 valid_chroot_dirs = /var/mail/virtual maildir_copy_with_hardlinks = yes protocol imap { mail_plugins = quota imap_quota trash login_greeting_capability = yes imap_client_workarounds = outlook-idle } protocol pop3 { pop3_uidl_format = %08Xu%08Xv mail_plugins = quota pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } protocol lda { postmaster_address = postmaster(a)amigo.net } auth_default_realm = amigo.net auth_username_translation = %@ auth_username_format = %Ln@%d auth_worker_max_count = 60 auth default { mechanisms = plain login apop digest-md5 cram-md5 passdb sql { args = /etc/dovecot/dovecot-sql.conf } userdb prefetch { } user = vmail count = 10 socket listen { master { path = /var/run/dovecot/auth-master mode = 0660 user = postfix group = mail } client { path = /var/run/dovecot/auth-client mode = 0660 } } } plugin { quota = maildir trash = /etc/dovecot/dovecot-trash.conf } Dovecot-sql.conf: driver = mysql connect = host=myhost dbname=mydb user=myuser password=mypass password_query = SELECT username as user, clearpw as password, home as userdb_home, uid as userdb_uid, gid as userdb_gid FROM EmailAccounts where username = '%u' -- Kenny Dail <kend(a)amigo.net>

2 1

Re: [Dovecot] POP3 protection
by Jos Chrispijn 03 Dec '06

03 Dec '06

Odhiambo WASHINGTON: > Use a database and create an imap_enable field that is 1 if enabled and > 0 if disabled and use this condition in the query. Actually I am suggesting to let go SQL only for that and do it with a simple, plain text solution from within the configuration file. That can't be that difficult can it? It Postfix can do stuff with sender_checks and client_checks why using a database for a simple 0 or 1 :-) thanks for your reply, Floor

3 6

[Dovecot] %s service variable substitution
by Jim Horner 02 Dec '06

02 Dec '06

I'm using 1.0rc15. We switched over to using deliver LDA and using dovecot's sasl implementation for postfix... In our ldap configuration we were using (similar for password filter) user_filter = (&(objectClass=mailUser)(mail=%u)(mailSettingValue=%s)) The problem is these new services, namely deliver and postfix, are accessing the authentication mechanisms and I am not sure what to put in ldap so the %s can match. Each user currently only has a mailSettingValue=IMAP. This can be expanded for multiple entries. Thanks, Jim

1 1

[Dovecot] Quota's with Thunderbird
by Richard Mayhew - Nashua Mobile Broadband Division 30 Nov '06

30 Nov '06

Hi, Does anyone know how to get Thunderbird to correctly report the mailbox quota's? I know Dovecot is correctly enforcing the quotas on the mailbox when using Thunderbird, but Thunderbird reports that the "server does not support quota's" when trying to view the usage? Is Thunderbird expecting something different? Viewing the mailbox through Squirelmail, the quota's are reported correctly, so I would thnk that Thunderbird is where the problem lies. Regards Richard

3 3