- dovecot - dovecot.org

[Dovecot] migration from IMAP/POP3 courier server to a remote dovecot server
by nik600 02 Sep '13

02 Sep '13

Dear all i'm planning a transparent migration from a courier server that provides both IMAP and POP3 access to users to a remote dovecot server with both IMAP and POP3 access. I have to migrate about 2500 users for 250 GB of space. I'm using dovecot 2.2.5.4 on debian6 squeeze. To make a transparent migration i have to maintain old IMAP UIDs and POP3 UIDs, so i've read http://wiki2.dovecot.org/Migration and http://wiki2.dovecot.org/Migration/Courier and http://wiki2.dovecot.org/Migration/Dsync And decided that probably the best tool to use is Dsync, as the courier-dovecot-migrate.pl<http://www.dovecot.org/tools/courier-dovecot-migrate.pl> script works only locally. I've tested the dsync following instructions reported above but after the migration of one test-account the client re-download messages. If i want to keep both IMAP UIDs and POP3 UIDs i have to sync both imapc and pop3c with two commands? doveadm -o imapc_user=foo -o pop3c_user=foo -o imapc_password=bar -o pop3c_password=bar backup -R -u user@domain imapc: doveadm -o imapc_user=foo -o pop3c_user=foo -o imapc_password=bar -o pop3c_password=bar backup -R -u user@domain pop3c: Or imapc is enough? Do you have any suggestion? Thanks -- /*************/ nik600 http://www.kumbe.it

1 2

[Dovecot] Getting back into Dovecot 2.2.5
by Kai Hendry 02 Sep '13

02 Sep '13

Hi there, I'm prompted to get into running my own mail server again with Gmail going bad. However I found /usr/share/doc/dovecot/example-config/conf.d/ a little scary, since I like to have my configs as minimalistic as possible, e.g. http://dabase.com/blog/Minimal_squid3_proxy_configuration/ So far I have: https://github.com/Webconverger/sg.webconverger.com/blob/master/dovecot/dov… I was kinda hoping for a Maildir, but this doesn't work: mail_location = maildir:~/Maildir:LAYOUT=fs:INBOX=/var/mail/%u I do realise /var/mail/%u is a mbox, but I was wondering if there could be some clever conversion. I was surprised something like INBOX=/var/mail/%u wasn't the default btw. Also surprised dovecot seems to choke on single line syntax like `passdb { driver = pam }` :-) Next thing I'm confused about is the `namespace inbox {` stuff. Is it really needed? I was expecting Dovecot to create the folders once I defined them, but mutt couldn't see them until I created them myself. The mail server is just for myself and a few colleagues. We will probably use mutt as our MUA and Apple Mail on IOS when we are out & about. I next plan to integrate dspam, and work out how to sort mails into folders like I previously effectively had with Gmail's labels. I was confused to which mechanism I should be using to sort mail into folders with rules. Sieve? Back to Procmail? Pigeonhole? I'm looking to avoid complexity here. On the topic of search, can I get away with not running a Solr server? Since I shudder at the thought of running Tomcat. http://wiki2.dovecot.org/Plugins/FTS Kiitos paljon for any pointers!

3 4

[Dovecot] Auto-blocking faulty login attempts
by Jos Chrispijn 01 Sep '13

01 Sep '13

Dear group, How can I block login attempts to dovecot after trying 5 times in error? -- Best regards, Jos Chrispijn --- Artificial intelligence is no match for natural stupidity

3 2

[Dovecot] Dovecot and Postfix Authentication
by Christopher Trom 31 Aug '13

31 Aug '13

I am a student and am trying to get a mail server setup for a project. I have all of the Postfix configuration taken care of, but I am confused by the way that authentication works with Dovecot in the mix. As a user of the system, am I supposed to authenticate myself to Postfix, Dovecot, both individually, or both together? My Postfix users are stored in a PostgreSQL database, should Dovecot also be connected to this db? Some basic pointers on how this setup ought to look is all that I'm hoping for. Thank you, Christopher

2 1

Re: [Dovecot] Bizarre permissions problem
by Joseph Tam 31 Aug '13

31 Aug '13

Bill Oliver writes: > There's *one* user I can't get it to work on without a > workaround. The user is "newuser" and the uid is 1111 (actual name and > number changed to protect the innocent). The error I get in my maillog > is: > > The error I get in may maillog is: > Aug 29 16:02:11 localbox dovecot: imap(newuser): Error: chown(/home/newuser/mail/.imap/INBOX, -1, 12(mail)) failed: Operation not permitted (egid=1111(newuser), group based on /var/mail/newuser) > Aug 29 16:02:11 localbox dovecot: imap(newuser): Error: mkdir(/home/newuser/mail/.imap/INBOX) failed: Operation not permitted > Aug 29 16:02:11 localbox dovecot: imap(newuser): Error: chown(/home/newuser/mail/.imap/INBOX, -1, 12(mail)) failed: Operation not permitted (egid=1111(newuser), group based on /var/mail/newuser) > Aug 29 16:02:11 localbox dovecot: imap(newuser): Error: mkdir(/home/newuser/mail/.imap/INBOX) failed: Operation not permitted > Aug 29 16:02:11 localbox dovecot: imap(newuser): Error: chown(/home/newuser/mail/.imap/INBOX, -1, 12(mail)) failed: Operation not permitted (egid=1111(newuser), group based on /var/mail/newuser) > Aug 29 16:02:11 localbox dovecot: imap(newuser): Error: mkdir(/home/newuser/mail/.imap/INBOX) failed: Operation not permitted > > Now, it looks to me like dovecot is saying that the user newuser can't > get to the /home/newuser/mail/.imap directory because it doesn't have > permission. However, the user newuser has all the permissions it needs: > > $ ls -la /home/newuser/mail > > total 20 > drwxrw---- 3 newuser newuser 4096 Aug 29 15:01 . > drwxrw---- 6 newuser newuser 4096 Aug 29 12:16 .. > drwxrwx--- 2 newuser newuser 4096 Aug 29 16:05 .imap > -rw-rw---- 1 newuser newuser 499 Aug 13 07:56 saved-messages > -rw-rw---- 1 newuser newuser 1756 Aug 16 11:15 sent-mail The output of doveconf -n would have been useful, especially as it relates to your mail_location value, but I can make a pretty good guess at what is happening. Dovecot is trying to create indices with analogous permissions to your mailbox files. Your user's INBOX (/var/mail/newuser) has permission user:group:mode = 1111:12:0660 *but* newuser is not in group "mail" (GID 12), hence it cannot do the required chown operations. (Notice the mode of .imap/: the group write is on so the chmod worked.) Your INBOX ended up this way because some LDA's auto-create new INBOX's with these permissions (to allow access to other part of the mail sysyem that are set-gid "mail"). Options: 1) chmod g-rwx /var/mail/newuser - assumes you have no other parts of your mailsystem that needs access to all user INBOX by assuming group "mail". - dovecot is smart enough to figure out group membersip is irrelevant is groups access is nil. 2) chgrp newuser /var/mail/newuser 3) To avoid future problems: make sure new mailboxes are created with workable permissions. There are also dovecot configs that loosen up some group access, but you'll have to investigate that yourself. Joseph Tam <tam(a)math.ubc.ca>

1 0

[Dovecot] kqueue bug?
by Timo Sirainen 31 Aug '13

31 Aug '13

Apparently Dovecot with kqueue ioloop enabled causes random crashes in FreeBSD 9.1. Anyone else noticed something like that? I'm wondering if Dovecot's kqueue code has a bug somewhere (I can't find it) or could it be that FreeBSD itself has a bug? Anyway it seems to be returning events for filters that have already been removed.

4 3

[Dovecot] Log successful login plain text password
by Marco Fretz 30 Aug '13

30 Aug '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi everyone, I want to use dovecot as a IMAP and POP3 proxy in front of our current E-Mail hosting server to log the plain text passwords of all successful logins for migration reasons. Actually I don't need the password to see in plain text, storing them as SHA256-CRYPT (or something dovecot can use later for auth) hash in a file or DB would be fine, too. I need this for the migration from the current mail server (using proprietary hashing to store passwords) to a new postfix / dovecot base mail system. I played around with "auth_debug_passwords" and all debug / logging options I found in the manual. Nothing logs successful login plaintext passwords. Any hint welcome. Thanks a lot, Marco -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.13 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJSHZ9tAAoJEKxm7Ju3UATui2cP/A3cf2TrNvOjjtP1TCgZZ5EC igsgngPlKiXU/RwHO9shBLXUyhKDHPGihNf9KL/RjoFnrgX1asPd/RF/2b080IU3 bNO49BLs8QqoroKz5E+TL8UNixlO5YQjnerKfJ5GIJbSUTC3MaxmN62Cl9jEaTWu 4dX3MXoB3ghoxt6FETSLXz6cEXsGd6KvqxolQC13NYtvpZED+qk7z3RywK8Xp/Au Ipx3xEnDRc/YvG3PeJlsjF9Ge80GxVVH0nudNOV/zmyuNfh4PkPRerk1R4Px01zI sxnXvcNjjenCJ6DMKBmOCyBii9Wl9i4opw9k4X4Z6MFEZGiodRz1usKWJMT0VqUG NBEJDOWsoWpasWMCtduBRrNQS3JI+o1tebDAI5n3K4lJ2d27+nosDvdQ8vNlVszM 8nhSn228RQNy9SJZNAvspOYQBM2gt5IQyWGA4jhrMUkwKeTfHZik8vh8lEcwbK9q H6Myue+i+G8wVa57F1V7/7x2LNGn56BWxTDlBrtKdK3KphCgEoCny/f5VYerO8It MnCMLPXI2oCC8qqkK7x45SYSe/eQhgV93LHpI5z25TqyeJ6R+7dglderRDQcNN0n OtbYMYkqlF8xJ4k+rVFwOC5VD7Bq+S2Q4LyLEf7wFH32Dc12pI/SnAL8DPvkNgbL FshgaVOXUEkb0WhnvROl =oEzx -----END PGP SIGNATURE-----

2 5

[Dovecot] Pigeonhole Sieve - sent message to xmpp account
by Ingo Thierack 30 Aug '13

30 Aug '13

Hello, does someone know, how far the implementation of enotify - xmpp is. Would be nice to push notifications to an jabber account for specific filtered mails. Regards, Ingo

2 1

[Dovecot] Bizarre permissions problem
by Bill Oliver 30 Aug '13

30 Aug '13

Help! I have been using dovecot for some years with great success. A little while ago, I changed my mail server from Fedora to CentOS linux. I reinstalled dovecot, and *almost* everything seems to be working, but one thing. There's *one* user I can't get it to work on without a workaround. The user is "newuser" and the uid is 1111 (actual name and number changed to protect the innocent). The error I get in my maillog is: The error I get in may maillog is: Aug 29 16:02:11 localbox dovecot: imap(newuser): Error: chown(/home/newuser/mail/.imap/INBOX, -1, 12(mail)) failed: Operation not permitted (egid=1111(newuser), group based on /var/mail/newuser) Aug 29 16:02:11 localbox dovecot: imap(newuser): Error: mkdir(/home/newuser/mail/.imap/INBOX) failed: Operation not permitted Aug 29 16:02:11 localbox dovecot: imap(newuser): Error: chown(/home/newuser/mail/.imap/INBOX, -1, 12(mail)) failed: Operation not permitted (egid=1111(newuser), group based on /var/mail/newuser) Aug 29 16:02:11 localbox dovecot: imap(newuser): Error: mkdir(/home/newuser/mail/.imap/INBOX) failed: Operation not permitted Aug 29 16:02:11 localbox dovecot: imap(newuser): Error: chown(/home/newuser/mail/.imap/INBOX, -1, 12(mail)) failed: Operation not permitted (egid=1111(newuser), group based on /var/mail/newuser) Aug 29 16:02:11 localbox dovecot: imap(newuser): Error: mkdir(/home/newuser/mail/.imap/INBOX) failed: Operation not permitted Aug 29 16:02:11 localbox dovecot: imap(newuser): Disconnected: Logged out bytes=108/669 Now, it looks to me like dovecot is saying that the user newuser can't get to the /home/newuser/mail/.imap directory because it doesn't have permission. However, the user newuser has all the permissions it needs: $ ls -la /home/newuser/mail total 20 drwxrw---- 3 newuser newuser 4096 Aug 29 15:01 . drwxrw---- 6 newuser newuser 4096 Aug 29 12:16 .. drwxrwx--- 2 newuser newuser 4096 Aug 29 16:05 .imap -rw-rw---- 1 newuser newuser 499 Aug 13 07:56 saved-messages -rw-rw---- 1 newuser newuser 1756 Aug 16 11:15 sent-mail newuser has the correct uid (1111) in /etc/dovecot/users newuser *is* the correct uid for that user, i.e.: $ id -u newuser 1111 the password is correct Both my web mail package (roundcube) and my android fail. Both work fine with all other accounts that are set up for imap services. The workaround, it turns out, is that if I make the directory /home/newuser/.imap/INBOX by hand as the user newuser, then things work. So, things seem to be working. However, I just don't understand why *this* user is having problems when none of the others are... The only thing that sets this user apart from any of the others is that it has administration privileges for the roundcube mailer MySQL database. Any explanations? Thanks! billo

2 1

[Dovecot] Sieve vacation reply problem (Dovecot+Sieve/Sendmail/Horde)
by megodin＠inboxalias.com 29 Aug '13

29 Aug '13

Hello Dovecot community, I have an annoying problem with successfully activating Sieve vacation replies - on which I have been working hard the last days without success :( I'm using Dovecot 2.2 + Sendmail + Sieve connected with Horde web-mailer IMP H3 which is generally working fine. BUT: Whenever I activate vacation script in Horde (via Ingo) and send a test-mail to this account, the mail itself arrives but the auto-vacation-reply failes: [mail.err] dovecot: lda(exampleuser): Error: sieve: original envelope recipient address 'exampleuser@dovecot_localhost' is unparsable [mail.warning] dovecot: lda(exampleuser): Warning: sieve: msgid=: vacation action aborted: envelope recipient is <> The Sieve Script which is generated and executed: # Sieve Filter produced by Ingo (http://www.horde.org/ingo/) (20.08.2013, 16:10) require ["vacation", "regex"]; # Abwesenheit if allof ( not exists ["list-help", "list-unsubscribe", "list-subscribe", "list-owner", "list-post", "list-archive", "list-id", "Mailing-List"], not header :comparator "i;ascii-casemap" :is "Precedence" ["list", "bulk", "junk"], not header :comparator "i;ascii-casemap" :matches "To" "Multiple recipients of*" ) { vacation :days 7 :addresses "example.user(a)example.com" :subject "vacation" "I am on vacation until xxxx. Please refer all urgent business to devnull(a)example.com ."; } I understand that Sieve is trying to send vacation replies to the envelope sender - apparently it gets it on the wrong line somewhere from the sendmail config. To get sendmail working along with Dovecot, I had to do some modifications: in /etc/mail/virtusertable (Alias with domain-path) @vlmail.example.com %1@dovecot_localhost in /etc/mail/access (allows relaying) to:dovecot_localhost RELAY in /etc/mail/mailertable (where to be relayed) dovecot_localhost dovecot:vlmail.example.com in /etc/mail/sendmail.cf (relevant part for the Dovecot Mailer specification): Mdovecot, P=/usr/libexec/dovecot/dovecot-lda, F=lDFMPhnu59, S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP/HdrFromSMTP, U=vmail:vmail, T=DNS/RFC822/X-Unix, A=/usr/libexec/dovecot/dovecot-lda -d $u After several hours playing with sendmail's config I came to the end that sendmail's part must be already over when sieve is getting the original envelope recipient - it seems like it gets it from dovecot-lda. Though, when playing with the Dovecot Mailer specifications in sendmail.cf I can get different error message if I add A=/usr/libexec/dovecot/dovecot-lda -d $u -a $n (adding username part in destination address): [mail.info] dovecot: lda(exampleuser): sieve: msgid=: discarding vacation response for implicitly delivered message; no known (envelope) recipient address found in message headers (recipient=, and additional `:addresses' are specified) BTW, the original mails arriving have a valid Return-Path in header... I am thinking of writing global Sieve scripts (executing before the user's private sieve script), telling Sieve to use the TO: field instead of the Envelope sender but I'm not sure if this is possible, and if, which commands are needed specifically. I really start getting desperate... Can somebody get me some clue what is wrong in my config / where I should put modifications to get sieve vacation replys working properly?! Thanks in advance!! Megodin My Setup: - Dovecot EE 2.2.5.3 + pigeonhole Sieve 0.4.1 - Sendmail Version 8.14.4 (compiled with: DNSMAP HESIOD HES_GETMAILHOST LDAPMAP LOG MAP_REGEX MATCHGECOS MILTER MIME7TO8 MIME8TO7 NAMED_BIND NETINET NETINET6 NETUNIX NEWDB NIS PIPELINING SASLv2 SCANF SOCKETMAP STARTTLS TCPWRAPPERS USERDB USE_LDAP_INIT) - Horde 3.3.13 (Ingo H3 1.2.6) doveconf -n # 2.2.5.3 (f54f8c8f5502): /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-279.22.1.el6.x86_64 x86_64 CentOS release 6.4 (Final) nfs auth_cache_size = 10 M auth_cache_ttl = 10 mins auth_debug = yes auth_master_user_separator = * auth_username_format = %n auth_verbose = yes disable_plaintext_auth = no listen = * lock_method = dotlock mail_debug = yes mail_fsync = always mail_gid = vmail mail_home = /mnt/vmails/%u mail_location = sdbox:/mnt/vmails/%u/mailstore mail_plugins = " quota fts fts_lucene" mail_privileged_group = mail mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave mmap_disable = yes passdb { args = /etc/dovecot/users.blocked deny = yes driver = passwd-file } passdb { args = /etc/dovecot/passwd.masterusers driver = passwd-file master = yes } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { fts = lucene fts_lucene = whitespace_chars=@. quota = dict:User quota::file:%h/dovecot-quota quota_rule = *:storage=100M quota_rule2 = Trash:storage=+50M quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=98%% quota-warning 98 %u sieve = /mnt/vmails/%u/.dovecot.sieve sieve_dir = /mnt/vmails/%u/sieve sieve_global_dir = /var/lib/dovecot/sieve/global/ sieve_global_path = /var/lib/dovecot/sieve/default.sieve } postmaster_address = postmaster(a)example.com protocols = imap pop3 sieve service auth { unix_listener auth-userdb { group = vmail user = vmail } } service managesieve-login { inet_listener sieve { port = 4190 } } service quota-warning { executable = script /usr/local/bin/quota-warning.sh unix_listener quota-warning { user = vmail } user = vmail } ssl_cert = --- Alle PostfÃ¤cher an einem Ort. Jetzt wechseln und E-Mail-Adresse mitnehmen! http://email.freenet.de/basic/Informationen _________________________________________________________________ Send and receive anonymous emails to your inbox with InboxAlias. http://www.inboxalias.com

2 1

[Dovecot] 2.2.4 + metadata plugin: autoconf failed
by Andreas Schulze 29 Aug '13

29 Aug '13

Hello, I can compile metadata plugin using debian squeeze + wheezy. But build on suse enterprise server 9,10 and 11 failed. The metadata plugin require autoconf-2.65 which i too new. On the other side I can build the dovecot-2.2.4 and pigeonhole-0.4.0 plugin without problems: dovecot require autoconf-2.59 and pigeonhole does not require any specific autoconf version. I asked the authors of the plugin for support but got no response. Maybe somebody could review the plugin. Thanks Andreas -- Andreas Schulze Internetdienste | P252 DATEV eG 90329 Nürnberg | Telefon +49 911 319-0 | Telefax +49 911 319-3196 E-Mail info @datev.de | Internet www.datev.de Sitz: 90429 Nürnberg, Paumgartnerstr. 6-14 | Registergericht Nürnberg, GenReg Nr.70 Vorstand Prof. Dieter Kempf (Vorsitzender) Dipl.-Kfm. Wolfgang Stegmann (stellvertretender Vorsitzender) Dipl.-Kfm. Michael Leistenschneider Dipl.-Kfm. Dr. Robert Mayr Jörg Rabe v. Pappenheim Dipl.-Vw. Eckhard Schwarzer Vorsitzender des Aufsichtsrates: Reinhard Verholen

2 3

Re: [Dovecot] Dovecot Dsync
by Ed W 29 Aug '13

29 Aug '13

On 27/08/2013 09:54, Ben wrote: > On 23/08/2013 13:08, Ed W wrote: >> Hi >> >>> I'm on an Ubuntu LTS release so the dovecot came from their release. >>> I'd prefer to stay that way unless I really have to... >> >> Everyone is entitled to their own opinions, but "IMHO" this kind of >> attitude is a huge detriment to most software projects. I see very >> little reason to take such policies personally... >> >> 1) I use virtualisation (especially lightweight virtualisation such as >> vservers) so that each service is in its own container. Now if I have no >> interest in some container and want to let it rot (ie as per LTS), then >> I can just do so. >> 2) I use a fast moving rolling distro (gentoo in my case, Arch is >> probably a good choice also) so that I have the option to stay up to >> date when I want to >> >> The end result is you can be as up to date as you want, or let things >> rot, as you please. >> >> Unfortunately if you want to use a very old bit of software, then you >> also get to keep all it's bugs... Sorry. >> >> Good luck! Hope this inspires you to try a different route! >> >> Ed W > > Whilst to some degree I appreciate where you're coming from and agree > with you to a certain extent, I would caution that following the > bleeding edge, always running the latest versions is not without risk > or bugs either ! OK, but virtualisation also helps you mitigate this: - I setup my "containers" so that I have at least two mount points, one for the operating system and any data broken out into it's own mount. - This makes it quite simple to duplicate the container and spin up a test version pointing if required at the live data - Now you can run a test upgrade on the test container. If it works either swap them around or upgrade the original Additionally: - My choice of distro (gentoo) makes it fairly simple to build binary packages of the software I'm using. - I then use these binary packages on all my containers, additionally with guided profiles which control which packages and which options we deploy. - It's fairly simple to roll back most packages to the previous binary version if a problem is detected (logging of package changes is built-in) So it's quite low risk to use such a rolling distro in general. Note, I can't speak for other distros, but gentoo "stable" is fairly conservative and shouldn't be a problem for an experienced admin to keep up to date. It has the option to unmask "bleeding edge" packages where necessary and this can be useful to hit specific version numbers of software. It's also pretty trivial to keep a private repo of customised packages (ebuilds) with either personal patches or to pin certain versions of software. (So for example if you run, say, Dovecot with a few custom patches, then it's fairly trivial to drop these patches in a directory and now you can use the package manager to follow stable builds, but your custom patches will be rolled in for you with each update - can be very handy for some requirements) I don't have the same experience with RPM/DEB so I can't say that all the same is easy to do, but the key thing is the use of containers/virtualisation to assist with testing and upgrades. Even worst case you have to do a whole OS upgrade, at least if you can do that in a test container while the live remains running, is a big advantage Good luck Ed W

1 0

Re: [Dovecot] mailbox_list_index, stops showing new mails in mailboxes
by Joseph Tam 29 Aug '13

29 Aug '13

Anton Lundin writes: > I'm using 2.2.4 over imap and ssh/imap, and after a while dovecot > stops noticing new mail in some folders. Its always the same 2-3 > folders of about 30. > ... > This is dovecot 2.2.4, running on Solaris 10 x86_64 to homedirs on zfs, > where procmail is used to deliver mail to mailboxes in mbox-format. What's your procmail recipe for delivering messages? If you're storing it directly to a mbox file, dovecot will never get a chance to see it and update the indices. An example of invoking LDA to store messages :0 Hw * /^From:.*dummy@/ | dovecot-lda -d yourusername -m dummybox # Dump mail into my INBOX using dovecot's LDA :0 w | dovecot-lda -d yourusername Joseph Tam <jtam.home(a)gmail.com>

2 1

[Dovecot] Issues with dovecot-antipsam plugin
by Vijay Rajah 29 Aug '13

29 Aug '13

Hello list, I have a postfix 2.11 with dovecot 2.2.5 instance. I have configured and installed anavisd-new to use Spamassassin. I want to train the filter. For that i choose dovecot's antispam plugin using mailtrain backend. I compiled and installed the latest version of the antispam plugin from http://hg.dovecot.org/dovecot-antispam-plugin/rev/5ebc6aae4d7c The configuration is below. Whenever I receive an email, the LMTP process segfaults. If I comment out the antispam plugin part in the config files, all works good. THis leads me to believe the issue is with antispam plugin, or its configuration. Here is what i see in /var/log/mailllog Aug 28 23:06:31 hostname.tld postfix/qmgr[1437]: 055F6345E: from=< sender(a)example.com>, size=10370, nrcpt=1 (queue active) Aug 28 23:06:31 hostname.tld postfix/smtpd[5512]: disconnect from localhost[127.0.0.1] Aug 28 23:06:31 hostname.tld amavis[5369]: (05369-05) Passed SPAM {RelayedTaggedInbound,Quarantined}, [74.125.82.176]:51219 [74.125.82.176] < sender(a)example.com> -> <email(a)mydomain.tld>, quarantine: spam-J09TFNU33sxa.gz, Queue-ID: 3A8093119, Message-ID: < CAMGVk5vH9YzkNFJ3xnWJ0060vpuf1PPzaCHWx71AmGF_qgJTmg(a)mail.gmail.com>, mail_id: J09TFNU33sxa, Hits: 12.123, size: 9323, queued_as: 055F6345E, dkim_sd=20120113:gmail.com, 606 ms Aug 28 23:06:31 hostname.tld postfix/lmtp[5510]: 3A8093119: to=<email(a)mydomain.tld>, relay=127.0.0.1[127.0.0.1]:10024, delay=1.6, delays=0.94/0/0/0.61, dsn=2.0.0, status=sent (250 2.0.0 from MTA(smtp:[127.0.0.1]:10025): 250 2.0.0 Ok: queued as 055F6345E) Aug 28 23:06:31 hostname.tld postfix/qmgr[1437]: 3A8093119: removed Aug 28 23:06:31 hostname.tld dovecot: lmtp(5514): Connect from local Aug 28 23:06:31 hostname.tld dovecot: lmtp(5514): Fatal: master: service(lmtp): child 5514 killed with signal 11 (core dumps disabled) Aug 28 23:06:31 hostname.tld postfix/lmtp[5513]: 055F6345E: to=<email(a)mydomain.tld>, relay=hostname.tld[/opt/var/postfix/dovecot-lmtp], delay=0.09, delays=0.04/0/0.04/0, dsn=4.4.2, status=deferred (lost connection with hostname.tld[/opt/var/postfix/dovecot-lmtp] while sending end of data -- message may be sent more than once) Can someone help in fixing the issue… -Thanks in advance Vijay ######doveconf -n # 2.2.5: /opt/dovecot/2.2.5/etc/dovecot/dovecot.conf # OS: Linux 2.6.32-358.14.1.el6.x86_64 x86_64 CentOS release 6.4 (Final) ext4 auth_mechanisms = plain login digest-md5 cram-md5 auth_socket_path = /opt/var/dovecot/run/auth-userdb base_dir = /opt/var/dovecot/run/ debug_log_path = /var/log/dovecot-debug.log hostname = mail1(a)rvijay.me mail_debug = yes mail_location = maildir:/opt/mailbox/%d/%n/Maildir mail_plugin_dir = /opt/dovecot/2.2.5/lib/dovecot/ mail_plugins = " virtual quota antispam zlib" managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace inbox { inbox = yes location = mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Junk { auto = subscribe special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Spam { auto = subscribe } mailbox Trash { auto = subscribe special_use = \Trash } prefix = separator = / type = private } passdb { args = /opt/dovecot/2.2.5/etc/dovecot/conf.d/dovecot-sql.conf.ext driver = sql } plugin { antispam_allow_append_to_spam = no antispam_backend = mailtrain antispam_mail_notspam = --ham antispam_mail_sendmail = /opt/dovecot/2.2.5/bin/sa-learn-pipe.sh antispam_mail_sendmail_args = -u vmail antispam_mail_spam = --spam antispam_mail_tmpdir = /tmp antispam_spam = Spam antispam_trash = Trash mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size quota = maildir:User quota quota_grace = 10%% quota_rule = *:storage=1GB quota_rule2 = Trash:storage=+10%% quota_rule3 = Spam:storage=+20%% quota_status_nouser = DUNNO quota_status_overquota = 450 4.2.2 Mailbox is full. Try again later quota_status_success = DUNNO quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u quota_warning3 = -storage=100%% quota-warning below %u sieve = ~/.dovecot.sieve sieve_before = /opt/var/dovecot/sieve/ sieve_dir = ~/sieve sieve_global_dir = /opt/var/dovecot/sieve zlib_save = bz2 zlib_save_level = 9 } protocols = imap lmtp sieve service auth { unix_listener /opt/var/postfix/dovecot-auth { group = postfix mode = 0660 user = postfix } } service imap-login { inet_listener imap { port = 143 } } service lmtp { unix_listener /opt/var/postfix/dovecot-lmtp { group = postfix mode = 0660 user = postfix } } service managesieve-login { inet_listener sieve { port = 4190 } service_count = 10 vsz_limit = 64 M } service managesieve { process_limit = 1024 } service quota-status { client_limit = 1 executable = quota-status -p postfix inet_listener { port = 12340 } } service quota-warning { executable = script /opt/dovecot/2.2.5/etc/dovecot/conf.d/quota-warning.sh user = vmail } shutdown_clients = no ssl_ca = </opt/dovecot/2.2.5/etc/dovecot/ssl/mayca.crt.pem ssl_cert = </opt/dovecot/2.2.5/etc/dovecot/ssl/cert.pem ssl_key = </opt/dovecot/2.2.5/etc/dovecot/ssl/key.key ssl_parameters_regenerate = 30 hours submission_host = 127.0.0.1:587 userdb { driver = prefetch } userdb { args = /opt/dovecot/2.2.5/etc/dovecot/conf.d/dovecot-sql.conf.ext driver = sql } protocol lda { mail_plugins = " virtual quota antispam zlib sieve zlib" } protocol imap { mail_plugins = " virtual quota antispam zlib imap_quota imap_zlib" } protocol lmtp { debug_log_path = /var/log/dovecot-lmtp-debg.log mail_plugins = " virtual quota antispam zlib sieve zlib" }

1 0

[Dovecot] Enforcing server cipher list order
by Phillip Odam 29 Aug '13

29 Aug '13

I noticed a similar/same discussion back on Aug 14th titled force ciphers order for clients. However from that thread I can't find quite what I'm after. From my testing of dovecot 2.1.6, by default it appears to honor the clients cipher list order for SSL/TLS connections. I can't find any documentation on dovecot providing a setting like Apache HTTPDs to either honor the client or server cipher list i.e. SSLHonorCipherOrder. Do newer versions (> 2.1.6) of dovecot either make this configurable or force honoring of the servers cipher list order? Or is the cipher selection a function that openssl performs? The version of openssl in use is 1.0.1e-fips. Thanks Phillip

1 0

Re: [Dovecot] Log successful login plain text password
by Joseph Tam 29 Aug '13

29 Aug '13

Marco Fretz writes: > Maybe you can find a way in this direction > > http://wiki2.dovecot.org/HowTo/ConvertPasswordSchemes I've sync'd a separate password system by process tracing dovecot's auth process and dumping out the arguments of read() calls for some fixed set of descriptors and piping it into password synching script. A bit of a hack, but it works without having to touch dovecot. Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] Bug in dovecot 2.2.5: segfault due to bad alignment
by Andreas F. Borchert 29 Aug '13

29 Aug '13

Take a look at the sources, hmac.h declares struct hmac_context: struct hmac_context { char ctx[HMAC_MAX_CONTEXT_SIZE]; char ctxo[HMAC_MAX_CONTEXT_SIZE]; const struct hash_method *hash; }; If compiled for a 32 bit virtual address space, this has an alignment requirement of 4 due to the hash pointer. In line 171 of auth-token.c, we have following declaration of ctx as a local variable in auth_token_get(): struct hmac_context ctx; This is put on an address with an alignment requirement of 4. In lines 174 and 175 hmac_init is invoked with hash_method_sha1: hmac_init(&ctx, (const unsigned char*)username, strlen(username), &hash_method_sha1); In hmac.c, lines 43 and following, ctx->ctx with an alignment of 4 is passed to meth->init and meth->loop where meth refers to hash_method_sha1: meth->init(ctx->ctx); meth->loop(ctx->ctx, k_ipad, 64); These functions refer now to sha1_init and sha1_loop where the first parameter is expected to be a pointer to struct sha1_ctxt, a data structure which is declared in sha1.h: struct sha1_ctxt { union { uint8_t b8[20]; uint32_t b32[5]; } h; union { uint8_t b8[8]; uint64_t b64[1]; } c; union { uint8_t b8[64]; uint32_t b32[16]; } m; uint8_t count; }; Here we have with b64 one uint64_t which has on a SPARC platform an alignment requirement of 8. In consequence, struct sha1_ctxt has an alignment requirement of 8. With the invocations of meth->init and meth->loop above we pass a pointer to a data structure of alignment 4 to a function expecting a pointer to a data structure of alignment 8. Chances are that the alignment requirement is not met, causing a segmentation violation. This must be solved by declaring struct hmac_context such that is not just big enough but respects also the highest alignment required for one of the hashing data structures. There are several options to do this: * Beginning with C11, you are free to use an alignment specifier, i.e. add _Alignas ( uint64_t ) (see section 6.7.5 in ISO 9899-2011) * GCC supports alignment attributes, i.e. add __attribute__ ((aligned (8))) or whatever is required instead of 8, see http://gcc.gnu.org/onlinedocs/gcc/Variable-Attributes.html * Do not use a local variable for it, allocate the data structure using malloc instead. If you want to see a live crash, here is the relevant output of gdb that debugs ${prefix}/libexec/dovecot/auth. Program received signal SIGSEGV, Segmentation fault. sha1_loop (ctxt=0xffbff63c, input=0xffbff548, len=64) at sha1.c:224 224 sha1.c: No such file or directory. (gdb) where #0 sha1_loop (ctxt=0xffbff63c, input=0xffbff548, len=64) at sha1.c:224 #1 0xff2e218c in hmac_init (ctx=ctx@entry=0xffbff63c, key=key@entry=0x6a698 "borchert", key_len=8, meth=0x555d0 <hash_method_sha1>) at hmac.c:44 #2 0x00023310 in auth_token_get (service=service@entry=0x6a648 "imap", session_pid=0x56071 "26272", username=0x6a698 "borchert", session_id=0x6a650 "AErv6nbk6gB/AAAB") at auth-token.c:174 #3 0x00021708 in userdb_callback (result=USERDB_RESULT_OK, request=0x6a530) at auth-request-handler.c:668 #4 0x0001f144 in auth_request_userdb_callback (result=<optimized out>, result@entry=USERDB_RESULT_OK, request=request@entry=0x6a530) at auth-request.c:1039 #5 0x000312c8 in prefetch_lookup (auth_request=0x6a530, callback=0x1f058 <auth_request_userdb_callback>) at userdb-prefetch.c:40 #6 0x0001f37c in auth_request_lookup_user (request=0x6a530, callback=callback@entry=0x2150c <userdb_callback>) at auth-request.c:1072 #7 0x00022034 in auth_request_handler_master_request ( handler=<optimized out>, master=master@entry=0x6b120, id=1292369921, client_id=1, params=0x55bfc) at auth-request-handler.c:758 #8 0x0001be98 in master_input_request (args=<optimized out>, conn=0x6b120) at auth-master-connection.c:127 #9 auth_master_input_line (line=<optimized out>, conn=0x6b120) at auth-master-connection.c:598 #10 master_input (conn=0x6b120) at auth-master-connection.c:653 #11 0xff2ecca4 in io_loop_call_io (io=io@entry=0x6b398) at ioloop.c:387 #12 0xff2ed604 in io_loop_handler_run (ioloop=ioloop@entry=0x5e5e8) at ioloop-poll.c:211 #13 0xff2ec7a8 in io_loop_run (ioloop=0x5e5e8) at ioloop.c:406 #14 0xff29ad7c in master_service_run (service=0x5e128, callback=0x27b40 <client_connected>) at master-service.c:566 #15 0x0001852c in main (argc=1, argv=0xffbffd54) at main.c:393 (gdb) print ctxt $1 = (struct sha1_ctxt *) 0xffbff63c As you can see, ctxt is on a 4-byte boundary, not on an 8-byte boundary. The crash happens at sha1.c:224 where the 8-byte-alignment is indeed mandatory on a SPARC architecture: ctxt->c.b64[0] += copysiz * 8; The environment is Solaris 10 on SPARCv9. The sources have been compiled using gcc 4.8.0 for 32 bit. Andreas.

2 1

[Dovecot] Dovecot proxy to Microsoft Exchange 2013
by Ricardo Machini Barbosa 29 Aug '13

29 Aug '13

Hello, I am trying to do a proxy with dovecot to IMAP backend server that are using Microsoft Exchange 2013. I already did this with Microsoft Exchange 2007 and Microsoft Exchange 2010 and it works perfectly! But with Microsoft Exchange 2013 I can not perform LOGIN. The error log message is: /imap-login: Error: proxy(user(a)domain.com.br): Login for exchange2013.domain.com.br:143 timed out in state=4 (after 30 secs, local=x.x.x.x:59640)/ My troubleshoot was: - tcpdump on dovecot server side: I can see the commands sent/received by Microsoft Exchange. But no the "OK LOGIN" response. /* OK The Microsoft Exchange IMAP4 service in xxxx is ready.// //C CAPABILITY// //L LOGIN "user(a)domain.com.br" "123456"// //* CAPABILITY IMAP4 IMAP4rev1 AUTH=PLAIN STARTTLS UIDPLUS CHILDREN IDLE NAMESPACE LITERAL+// //C OK CAPABILITY completed./ - tcpdump with telnet login on dovecot server side: Works fine. /* OK The Microsoft Exchange IMAP4 service in xxxx is ready.// //a login "user(a)domain.com.br" "123456"// //a OK LOGIN completed.// //a logout// //* BYE Microsoft Exchange Server 2013 IMAP4 server signing off.// //a OK LOGOUT completed./ - Log verbose on Microsoft Exchange 2013. Look like that Microsoft Exchange did not receive the login command. Someone already tried do this with Microsoft Exchange 2013 ? See bellow some information about my dovecot configuration: /# 2.2.2: dovecot.conf// //# OS: Linux 2.6.32-358.2.1.el6.centos.plus.x86_64 x86_64 CentOS release 6.4 (Final)// // //base_dir = /var/run/dovecot/// //disable_plaintext_auth = no// //listen = x.x.x.x// //mbox_write_locks = fcntl// //passdb {// // args = /etc/dovecot/dovecot-ldap.conf.ext// // driver = ldap// //}// // //protocols = imap pop3// //service imap-login {// // inet_listener imap {// // port = 143// // }// // inet_listener imaps {// // port = 993// // ssl = yes// // }// // process_min_avail = 4// // service_count = 0// // vsz_limit = 512 M// //}// //service pop3-login {// // inet_listener pop3 {// // port = 110// // }// // inet_listener pop3s {// // port = 995// // ssl = yes// // }// // process_min_avail = 4// // service_count = 0// // vsz_limit = 512 M// //}// //ssl_cert = </etc/dovecot/certificate/chained.crt// //ssl_key = </etc/dovecot/certificate/cert.key// //userdb {// // driver = prefetch// //}// // ///etc/dovecot/dovecot-ldap.conf.ext// //hosts = x.x.x.x// //dn = cn=admin,o=email// //dnpass = xxxxxxx// //ldap_version = 3// //base = o=email// //scope=subtree// //pass_filter = mail=%u// //pass_attrs = uid=user,=password=,=proxy=y,mailHost=host,=nopassword=y/ Thanks, Ricardo Machini

4 7

[Dovecot] Disable PAM username change?
by George 28 Aug '13

28 Aug '13

Hi! I have a problem involving Samba4, exim4, fetchmail, Dovecot and PAM... I am using Dovecot 2.1.7 on Debian Wheezy. I have setup a "maildrop" machine, which fetches mail from an external POP3 server for multiple accounts using fetchmail, delivers to local users mailboxes through exim4 and then serves them on the intranet via IMAP with Dovecot. This works great with local unix users, but I am having some trouble to configure it to work with Samba4 AD users (Samba 4.0.9 running as a DC on the same machine). Basically, I have configured PAM with winbind and it works fine (AD users can SSH the machine for example). Dovecot also authenticates properly via PAM, but the problem is that the username gets changed in the process (PAM returrns the "username" as "DOMAIN\username"): Aug 21 22:50:22 dc2 dovecot: auth-worker(5179): Debug: auth(foo,127.0.0.1): username changed foo -> DOMAIN\foo Aug 21 22:50:22 dc2 dovecot: auth: Debug: auth(foo,127.0.0.1,<0bBfg3/kpQB/AAAB>): username changed foo -> DOMAIN\foo Aug 21 22:50:22 dc2 dovecot: auth: Debug: client out: OK#0111#011user=DOMAIN\foo So the actual problem is that exim4 is delivering the mail to, for example, "/var/mail/foo" but Dovecot is looking for the mailbox on "/var/mail/DOMAIN\foo", even if the username given in the IMAP session is just "foo". The wiki mentions<http://wiki2.dovecot.org/PasswordDatabase/PAM>that "a PAM module can change the username". Can this be avoided? I need either: * Exim to deliver the mail to the user mailbox, *including* the domain part (out of scope of this list, but information is welcome), or * Dovecot to fetch the mail *not* using the domain part as part of the username variable. As a quick and dirty workaround, I hardcoded the domain part in the exim delivery path (something like "/var/mail/DOMAIN\\$local_part"), but this is far from optimal since I cannot use both unix users and AD users, I cannot use dovecot_delivery LDA transport, etc. As a bottom line, I also posted this to the Samba list because I believe this could also be solved if winbind just always returned the username without the domain when queried (conf option not working, probable bug) Ideas are welcome!! Best regards, Jorge

1 1

[Dovecot] Install of Dovecot 2.2.5 on Solaris 10/Openssl version 0.9.7d 17 Mar 2004
by Haney, Donald 28 Aug '13

28 Aug '13

Greetings! I am attempting to install Dovecot 2.2.5 on Solaris 10 Sparc hardware with openssl version 0.9.7d 17 Mar 2004. I have created a dovecot user and a dove null user, assigned them their own login directories specifying the ksh shell and assigned them to their own groups. I have run the configure command successfully and am having trouble with the make. At first, I received the problem listed below: /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/lib -I../../src/lib-test -DMODULE_DIR=\""/usr/local/lib/dovecot"\" -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -fno-builtin-strftime -I/usr/sfw/include -MT iostream-openssl-context.lo -MD -MP -MF .deps/iostream-openssl-context.Tpo -c -o iostream-openssl-context.lo iostream-openssl-context.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/lib -I../../src/lib-test -DMODULE_DIR=\"/usr/local/lib/dovecot\" -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -fno-builtin-strftime -I/usr/sfw/include -MT iostream-openssl-context.lo -MD -MP -MF .deps/iostream-openssl-context.Tpo -c iostream-openssl-context.c -fPIC -DPIC -o .libs/iostream-openssl-context.o iostream-openssl-context.c: In function `ssl_proxy_ctx_set_crypto_params': iostream-openssl-context.c:451: error: `SSL_OP_SINGLE_ECDH_USE' undeclared (first use in this function) iostream-openssl-context.c:451: error: (Each undeclared identifier is reported only once iostream-openssl-context.c:451: error: for each function it appears in.) I followed directions found in http://hg.dovecot.org/dovecot-2.2/rev/27ebd9552471 to resolve this problem (I believe). I am now seeing the following error: test-http-server.c: In function `main': test-http-server.c:122: error: size of array `type name' is negative *** Error code 1 make: Fatal error: Command failed for target `test-http-server.o' Current working directory /export/home/hanedo00/dovecot-2.2.5/src/lib-http *** Error code 1 The following command caused the error: fail= failcom='exit 1'; \ for f in x $MAKEFLAGS; do \ case $f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ I have not had any luck thus far finding the solution for this error against test-http-server.o. Any assistance would be appreciated. Thanks, Don Haney This message and any attachments are solely for the use of intended recipients. The information contained herein may include trade secrets, protected health or personal information, privileged or otherwise confidential information. Unauthorized review, forwarding, printing, copying, distributing, or using such information is strictly prohibited and may be unlawful. If you are not an intended recipient, you are hereby notified that you received this email in error, and that any review, dissemination, distribution or copying of this email and any attachment is strictly prohibited. If you have received this email in error, please contact the sender and delete the message and any attachment from your system. Thank you for your cooperation

2 1

[Dovecot] Trouble with case-sensitive LDAP user logins
by Jason Discount 28 Aug '13

28 Aug '13

Hi All, I have a client running Dovecot-Postfix on Debian Squeeze. I'm using Dovecot from the Squeeze repository. # dovecot --version 1.2.15 I've implemented a central mail_location and am using one vmail user, as I thought this would be be the best approach for when it came time to implement Shared and Public Mailboxes. # dovecot -n # 1.2.15: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-xen-686 i686 Debian 6.0.7 ext3 log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3s managesieve listen(default): 127.0.0.1:143 listen(imap): 127.0.0.1:143 listen(pop3): 127.0.0.1:110 listen(managesieve): * ssl_listen(default): *:993 ssl_listen(imap): *:993 ssl_listen(pop3): *:995 ssl_listen(managesieve): ssl_ca_file: /etc/ssl/certs/RapidSSL_CA_bundle.pem ssl_cert_file: /etc/ssl/certs/mail.example.com.2013.chain.pem ssl_key_file: /etc/ssl/private/example.2013.key login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login mail_max_userip_connections(default): 40 mail_max_userip_connections(imap): 40 mail_max_userip_connections(pop3): 10 mail_max_userip_connections(managesieve): 10 mail_privileged_group: mail mail_uid: vmail mail_gid: vmail mail_location: maildir:/var/spool/dovecot/%d/%u mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve namespace: type: private separator: / inbox: yes list: yes subscriptions: yes lda: postmaster_address: postmaster(a)example.com mail_plugins: sieve quota log_path: /var/log/dovecot-deliver.log info_log_path: /var/log/dovecot-deliver.log auth default: mechanisms: plain login passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf userdb: driver: ldap args: /etc/dovecot/dovecot-ldap-userdb.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: vmail plugin: quota: maildir:User quota_rule: *:storage=1200M quota_rule2: Deleted Messages:storage=10%% quota_rule3: Deleted Items:storage=10%% quota_rule4: Trash:storage=10%% sieve: /var/spool/sieve/%d/%u/.dovecot.sieve sieve_dir: /var/spool/sieve/%d/%u All of the mail users are LDAP users only (not local UNIX users - not using nsswitch). dovecot-ldap-userdb.conf is a symbolic link to dovecot-ldap.conf # grep -v '^ *$#.*$\?$' /etc/dovecot/dovecot-ldap.conf uris = ldaps://mail.example.com/ dn = uid=mail,ou=Services,dc=example,dc=com dnpass = ****************** tls_require_cert = hard auth_bind = yes base = ou=People,dc=example,dc=com user_attrs = quota=quota_rule=*:storage=%$M user_filter = (&(objectClass=posixAccount)(mail=%u)) pass_attrs = uid=mail,userPassword=password pass_filter = (&(objectClass=posixAccount)(mail=%u)) Now, mail addressed to user(a)example.com and user(a)EXAMPLE.com correctly gets delivered to the correct mail location of /var/spool/dovecot/example.com/user, but the problem occurs when the user creates their account with uppercase characters in their username, e.g. user(a)exaMPLE.com. This creates a new directory at /var/spool/dovecot/exaMPLE.com/user, which ever receives any mail. Is it possible to ignore the case the user enters in their mail client and always land them at the lowercase mail directory? Where would this be done? Thank you, Jay

1 0

[Dovecot] How do I get CRAM-MD5 to work?
by LuKreme 28 Aug '13

28 Aug '13

I know how to ENABLE CRAM-MD5, but getting it to actually work? <http://wiki2.dovecot.org/HowTo/CRAM-MD5> It looks like I have to 1) manually create a CRAM-MD5 data file and, I suppose, 2) manually manage the file? Given I do not know user's passwords, this might be tricky. Currently I have users authenticate against MySQL (virtual users) or pam (local users). Or do i just ignore it all and stick with PLAIN since the connection is already encrypted? What is LOGIN? My MUA supports "Password" (which is PLAIN evidently), kerberos 5, MD5 Challenge-response (CRAM-MD5), and NTML (??) -- If you have any young friends who aspire to become writers, the second-greatest favor you can do them is to present them with copies of The Elements of Style. The first-greatest, of course, is to shoot them now, while they're happy. -Dorothy Parker

1 0

[Dovecot] Migrating from Maildir to Maildir:LAYOUT=fs
by Rainer M Krug 27 Aug '13

27 Aug '13

Hi I have use dovecot together with offlineimap to download my gmail account on a single user computer and I have only one maildir (~/Maildir). As I switched to Mac, I would like to use spotlight to index my mails, which apparently does not work as they are in hidden directories (.directories). So I would like to change to LAYOUT=fs. Is there an easy way to migrate my email structure? I have several folders and subfolders, but a manual solution would be fine with me as well. My questions: 1) can I simply restructure the mailboxes and rename the folders / move them into the folders where I want them after changing the configuration of dovecot? 2) Is there an easy tool I can use for this for one mailbox which is doing it automatically? Thanks, Rainer -- Rainer M. Krug email: RMKrug<at>gmail<dot>com

3 4

[Dovecot] Developer docs?
by C. Mills 27 Aug '13

27 Aug '13

Hi, I'm looking to modify Dovecot slightly to add support for a custom feature. I've spent some time reading the code, and I've been wondering if there are any contributor/developer documents I've missed that would make getting up to speed easier. I've read much of the code, and most of the wiki, including the Design/* and /*Process pages. They give a good summary of some of the design decisions, but I don't see much other than that. The docs included in the tarball are just dumps of the wiki pages. I've browsed some of the list archives as well, without finding much to help me. Are there other resources I've missed? What I'm trying to do requires passing some additional information/state from the imap-login process (presumably through the master) to the imap mail process. Any pointers much appreciated! Thanks, C. -- ----------------------------------------------------------------------- C. Mills -----------------------------------------------------------------------

2 4

[Dovecot] Dovecot tuning for GFS2
by Andrea gabellini - SC 26 Aug '13

26 Aug '13

Hello, I'm deploing a new email cluster using Dovecot over GFS2. Actually I'm using courier over GFS. Actually I'm testing Dovecot with these parameters: mmap_disable = yes mail_fsync = always mail_nfs_storage = yes mail_nfs_index = yes lock_method = fcntl Are they correct? RedHat GFS support mmap, so is it better to enable it or leave it disabled? The documentation suggest the use of flock. What about it? Thanks, Andrea -- ---------------------------------------------------------------- Don't talk with a full mouth ... or with an empty head ---------------------------------------------------------------- Ing. *Andrea Gabellini* Email: andrea.gabellini(a)telecomitalia.sm <mailto:Andrea%20Gabellini%20%3Candrea.gabellini@telecomitalia.sm%3E> Skype: andreagabellini Tel: (+378) 0549 886111 Fax: (+378) 0549 886188 Telecom Italia San Marino S.p.A. Strada degli Angariari, 3 47891 Rovereta Republic of San Marino http://www.telecomitalia.sm

9 23

[Dovecot] zlib plugin issues
by Vijay Rajah 26 Aug '13

26 Aug '13

Hello, I'm running dovecot 2.2.5 in Centos 6.4 on EXT4 fs. I have activated zlib plugin. The incoming mails is compressed. However, when i try to retrieve the mail using imap I'm getting this error Aug 25 22:17:31 vrajah-vps5 dovecot: imap(me@<mydomain.tld>): Error: Cached message size smaller than expected (1464 < 2452) Aug 25 22:17:31 vrajah-vps5 dovecot: imap(me@<mydomain.tld>): Error: Maildir filename has wrong S value, renamed the file from /mail/mailbox/ rvijay.me/me/Maildir/.vijay_gmail/cur/1377448276.M960004P32378.vrajah-vps5,S=1464:2, to /mail/mailbox/<mydomain.tld>/me/Maildir/.vijay_gmail/cur/1377448276.M960004P32378.vrajah-vps5,S=1464:2, Aug 25 22:17:31 vrajah-vps5 dovecot: imap(me@<mydomain.tld>): Error: Corrupted index cache file /mail/mailbox/<mydomain.tld>/me/Mai ldir/.vijay_gmail/dovecot.index.cache: Broken physical size for mail UID 12 $ file /mail/mailbox/<mydomain.tld>/me/Maildir/.vijay_gmail/cur/1377448276.M960004P32378.vrajah-vps5\,S\=1464\:2\,S /mail/mailbox/<mydomain.tld>/me/Maildir/.vijay_gmail/cur/1377448276.M960004P32378.vrajah-vps5,S=1464:2,S: bzip2 compressed data, block size = 900k Am I missing anything? any ideas is much appreciated. Thanks Vijay ###################doveconf -n ############################ Here is my doveconf -n # 2.2.5: /mail/dovecot/2.2.5/etc/dovecot/dovecot.conf # OS: Linux 2.6.32-358.14.1.el6.x86_64 x86_64 CentOS release 6.4 (Final) ext4 auth_mechanisms = plain login digest-md5 cram-md5 auth_socket_path = /mail/var/dovecot/run/auth-userdb base_dir = /mail/var/dovecot/run/ debug_log_path = /var/log/dovecot-debug.log hostname = mail1(a)rvijay.me mail_location = maildir:/mail/mailbox/%d/%n/Maildir mail_plugin_dir = /mail/dovecot/2.2.5/lib/dovecot/ mail_plugins = " virtual quota zlib" managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace inbox { inbox = yes location = mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Junk { auto = subscribe special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { auto = subscribe special_use = \Trash } prefix = separator = / type = private } passdb { args = /mail/dovecot/2.2.5/etc/dovecot/conf.d/dovecot-sql.conf.ext driver = sql } plugin { mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size quota = maildir:User quota quota_grace = 10%% quota_rule = *:storage=1GB quota_rule2 = Trash:storage=+10%% quota_rule3 = Spam:storage=+20%% quota_status_nouser = DUNNO quota_status_overquota = 450 4.2.2 Mailbox is full. Try again later quota_status_success = DUNNO quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u quota_warning3 = -storage=100%% quota-warning below %u sieve = ~/.dovecot.sieve sieve_dir = ~/sieve sieve_global_dir = /mail/var/dovecot/sieve zlib_save = bz2 zlib_save_level = 9 } protocols = imap lmtp sieve service auth { unix_listener /mail/var/postfix/dovecot-auth { group = postfix mode = 0660 user = postfix } } service imap-login { inet_listener imap { port = 143 } } service lmtp { unix_listener /mail/var/postfix/dovecot-lmtp { group = postfix mode = 0660 user = postfix } } service managesieve-login { inet_listener sieve { port = 4190 } service_count = 10 vsz_limit = 64 M } service managesieve { process_limit = 1024 } service quota-status { client_limit = 1 executable = quota-status -p postfix inet_listener { port = 12340 } } service quota-warning { executable = script /mail/dovecot/2.2.5/etc/dovecot/conf.d/quota-warning.sh user = vmail } shutdown_clients = no ssl_ca = </mail/dovecot/2.2.5/etc/dovecot/ssl/mayca.crt.pem ssl_cert = </mail/dovecot/2.2.5/etc/dovecot/ssl/mail1.rvijay.me.pem ssl_key = </mail/dovecot/2.2.5/etc/dovecot/ssl/mail1.rvijay.me.key ssl_parameters_regenerate = 30 hours submission_host = 127.0.0.1:587 userdb { driver = prefetch } userdb { args = /mail/dovecot/2.2.5/etc/dovecot/conf.d/dovecot-sql.conf.ext driver = sql } protocol lda { mail_plugins = " virtual quota sieve zlib" } protocol imap { mail_plugins = " virtual quota imap_quota zlib" } protocol lmtp { mail_plugins = " virtual quota sieve zlib" }

1 1

[Dovecot] SMTP Proxy
by Leonardo Rodrigues 26 Aug '13

26 Aug '13

Hi, I have found a message on this mailing list dated August/2012 in which is said that dovecot could not (at least at that time) do SMTP Authentication using Proxy Features. http://www.dovecot.org/list/dovecot/2012-August/067998.html is this still true, given i'm using latest stable dovecot, v2.2.5 ? extra informations ... smtp authentication is done by postfix using: dovecot: service auth { unix_listener /var/spool/postfix/private/auth { mode = 0660 user = postfix group = postfix } } postfix: smtpd_sasl_type = dovecot smtpd_sasl_path = /var/spool/postfix/private/auth Thanks ! -- Atenciosamente / Sincerily, Leonardo Rodrigues Solutti Tecnologia http://www.solutti.com.br Minha armadilha de SPAM, NÃO mandem email gertrudes(a)solutti.com.br My SPAMTRAP, do not email it

2 4

[Dovecot] Nee assistance with migrating/copying a virtual user's maildir to another virtual user
by David Varela 26 Aug '13

26 Aug '13

Hello, I am trying to move/copy a virtual user's maildir to another virtual user but am running into problems with dsync and doveadm. I'm trying to move the maildir of a user who is no longer with the company to a manager's maildir. For doveadm I am using the command: doveadm move -u scavenaugh(a)lamontanita.coop jhenning(a)lamontanita.coop/INBOX/scavenaugh INBOX ALL The error is: doveadm(scavenaugh(a)lamontanita.coop): Error: user scavenaugh(a)lamontanita.coop: Auth USER lookup failed /var/log/dovecot.log shows: passdb doesn't support lookups, can't verify user's existence dovecot -n # 2.1.6: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 8.2-RELEASE i386 ufs auth_cache_ttl = 14 mins auth_debug = yes auth_debug_passwords = yes auth_mechanisms = plain gssapi login auth_use_winbind = yes auth_verbose = yes auth_winbind_helper_path = /usr/local/bin/ntlm_auth first_valid_gid = 1001 first_valid_uid = 1001 info_log_path = /var/log/dovecot_info.log last_valid_gid = 1001 last_valid_uid = 1001 log_path = /var/log/dovecot.log mail_debug = yes mail_location = maildir:/usr/data/vmail/%u mail_max_userip_connections = 30 mail_privileged_group = mail passdb { args = /usr/local/etc/dovecot-ldap.conf driver = ldap } plugin { sieve = /usr/data/sieve-scripts/%u.sieve } protocols = imap pop3 service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-master { mode = 0600 } user = root } ssl_cert = </etc/ssl/dovecot/04JAN12cert.pem ssl_key = </etc/ssl//dovecot/04JAN12key.pem userdb { args = uid=vmail gid=vmail home=/usr/data/vmail/%u driver = static } valid_chroot_dirs = /usr/data/vmail verbose_proctitle = yes protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep } protocol pop3 { pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xv } protocol lda { mail_plugins = sieve sendmail_path = /usr/sbin/sendmail } Your assistance is greatly appreciated. David Varela

2 5

[Dovecot] Dovecot auth error
by mehrdad nosrati 26 Aug '13

26 Aug '13

Greeting I'm newbie to Squirrelmail and just installed Dovecot in CentOS6.3. When I try to login to the Squirrelmail, then I get the following error: auth: Info: passwd(myusername(a)myserver.com): unknown user my config file is as follow: # /usr/bin/doveconf -n -c /etc/dovecot/dovecot.conf # 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-279.el6.x86_64 x86_64 CentOS release 6.3 (Final) auth_debug = yes auth_mechanisms = plain login auth_verbose = yes base_dir = /var/run/dovecot/ disable_plaintext_auth = no info_log_path = /var/log/dovecot-deliver.log log_path = /var/log/dovecot-deliver.log mail_debug = yes mail_location = maildir:~/MaIL mbox_write_locks = fcntl passdb { driver = passwd } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } protocol pop3 { pop3_uidl_format = %08Xu%08Xv Any help would be appreciable. Thanks! Mehrdad.

2 1

[Dovecot] A question of imap timeout exit
by 刘莹莹 26 Aug '13

26 Aug '13

hello: I have a question on imap process: if a client connect to dovecot like foxmail(version 10) , dovecot will start at least 3 imap processes , and these imap processes will online until client logout , if the client not logout ,the imap process will always online. this is similar to the long connection and imap's auto logout timer is not effect in this case. now I have two questions: 1: if there are a large number of users online at the same time ( eg about 30 000 users): so dovecot should shart at least 30 000 * 3 imap processes, if user not logout ,so many processes are online all the time .this is terrible. I dot'n know if there is a solution ?? now I have changed the timeout = 2min and test ,dovecot active disconnected imap process ,but I don't think this is a appropriate option. 2: I want to know why auto logout timer duration of IMAP protocol must be not less than 30 minuters ?? My English is not vary good ,I'm sorry but I really want to know the answer . thanks

2 1

[Dovecot] Disabled pop3-login
by LuKreme 26 Aug '13

26 Aug '13

In my dovecot.conf I do not have pop3-login anabled (since I do not support pop3): # doveconf -n # 2.2.5: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 9.1-RELEASE i386 auth_mechanisms = CRAM-MD5 DIGEST-MD5 APOP LOGIN PLAIN disable_plaintext_auth = no first_valid_uid = 89 log_path = /var/log/dovecot login_log_format_elements = user=<%u> %r %m %c mail_location = maildir:~/Maildir mail_max_userip_connections = 50 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { auto = subscribe special_use = \Junk } mailbox NotJunk { auto = subscribe } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { driver = pam } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } service auth { unix_listener /var/spool/postfix/private/auth { mode = 0666 } } service imap-login { inet_listener imaps { port = 993 ssl = yes } } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } userdb { args = /etc/dovecot/dovecot-sql.conf.ext default_fields = uid=vpopmail gid=vchkpw mail_location=/usr/local/virtual/%u driver = sql } but I see thousands (tens of thousands) of dovecot:Aug 18 14:26:06 pop3-login: Info: Aborted login (auth failed, 1 attempts in 17 secs): user=<john>, method=PLAIN, rip=74.95.82.150, lip=75.148.117.93, session=<+VcroT7kUgBKX1KW> dovecot:Aug 18 14:26:10 pop3-login: Info: Aborted login (auth failed, 1 attempts in 17 secs): user=<john>, method=PLAIN, rip=74.95.82.150, lip=75.148.117.93, session=<kbNdoT7kWwBKX1KW> dovecot:Aug 18 14:26:13 pop3-login: Info: Aborted login (auth failed, 1 attempts in 17 secs): user=<john>, method=PLAIN, rip=74.95.82.150, lip=75.148.117.93, session=<rRWQoT7kWgBKX1KW> dovecot:Aug 18 14:26:15 pop3-login: Info: Aborted login (auth failed, 1 attempts in 17 secs): user=<john>, method=PLAIN, rip=74.95.82.150, lip=75.148.117.91, session=<feCpoT7kfwBKX1KW> dovecot:Aug 18 14:26:16 pop3-login: Info: Aborted login (auth failed, 1 attempts in 17 secs): user=<john>, method=PLAIN, rip=74.95.82.150, lip=75.148.117.93, session=<lmTCoT7kiQBKX1KW> dovecot:Aug 18 14:26:18 pop3-login: Info: Aborted login (auth failed, 1 attempts in 17 secs): user=<john>, method=PLAIN, rip=74.95.82.150, lip=75.148.117.91, session=<5oPcoT7ktABKX1KW> Yes, I need to install fail2ban or something on this new machine, but still... -- Mom: There was more than one lobster present at the birth of Jesus? Daughter: Duh.

6 9

[Dovecot] commented lines still active
by LuKreme 26 Aug '13

26 Aug '13

despite the manage sieve lines on dovecot.conf being currently commented out show as active in doveconf -n # cd /usr/local/etc/dovecot/ # grep -ir sieve . ./dovecot.conf:#managesieve_notify_capability = mailto ./dovecot.conf:#managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave ? -- 'You know me,' said Rincewind. 'Just when I'm getting a grip on something Fate comes along and jumps on my fingers.' --Interesting Times

3 2

[Dovecot] dovecot OK for intranet, not OK for external IPs
by Sulla 25 Aug '13

25 Aug '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Dear all! I'm stuck. I've got a dovecot IMAP server running (TLS, port 149) on Ubuntu 13.04 server behind a DSL router. The mailserver's IP is 10.0.0.1 When I connect to my mailbox from my intranet-PC (10.0.0.2), everything works as expected. Login OK, acces to all mailboxes is ok, everything. netstat -nt on my email server shows me: Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 10.0.0.1:143 10.0.0.2:57952 ESTABLISHED and /var/log/mail.log shows me: Aug 24 22:41:00 SERVERNAME dovecot: imap-login: Login: user=<UID>, method=PLAIN, rip=10.0.0.2, lip=10.0.0.1, mpid=24326, TLS, session=<3Ul+irfkYAAKAAAC> However, when I connect to my mailserver through the internet (from 10.196.124.7 which is a modem of my ISP), dovecot ignores the authentication request. It does nothing. Just nothing. My router forwards the connection request to my mailserver correctly, so port forwarding on the router is ok, as my mailserver gets a connection request from the client. Proof: "netstat -nt" shows me: Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 10.0.0.1:143 10.196.124.7:1024 SYN_RECV So, my server gets a connection request on port 143 from my client PC, but then nothing happens. By nothing I mean, that nothing gets written into /var/log/mail.log and my email client (Thunderbird) gets a connection timeout. Any ideas why dovecot is refusing connections? How can I solve this problem? thanx all Sulla -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.17 (MingW32) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iEYEARECAAYFAlIZI7sACgkQR6b2EdogPFvqxACgrUACK1J8tHCxJR0jMUui14bs TsoAnAw4QnVr2kydjk2cErKW+i6oVu1f =86wg -----END PGP SIGNATURE-----

4 3

[Dovecot] Dovecot LDA
by LuKreme 24 Aug '13

24 Aug '13

OK, I did read <http://wiki2.dovecot.org/LDA> but it doesn't answer the question I have since it doesn't tell me what I can do with -o, exactly. What I would like to do is be able to call dovecot-lda and pass along '\\Seen', is that possible? -- Up the airy mountains, down the rushy glen... From ghosties and bogles and long-leggity beasties... My mother said I never should... We dare not go a-hunting for fear... And things that go bump... Play with the fairies in the wood... --Lords and Ladies

2 2

[Dovecot] expire plugin doesn't work?
by Anton Chigin 24 Aug '13

24 Aug '13

Hello, I've configured dovecot to use expire plugin: heres my dovecot -n: --------------------- # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-4-amd64 x86_64 Debian 7.1 ext4 auth_mechanisms = plain login dict { expire = mysql:/etc/dovecot/dovecot-dict-expire-sql.conf.ext } mail_location = maildir:/home/mail/vhosts/%d/%n mail_plugins = expire mail_privileged_group = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace inbox { inbox = yes location = mailbox Drafts { auto = no special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Spam { auto = subscribe special_use = \Junk } mailbox Trash { auto = subscribe special_use = \Trash } prefix = } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { expire = Trash 7 expire_dict = proxy::expire sieve = ~/dovecot.sieve sieve_dir = ~/sieve sieve_max_actions = 32 sieve_max_redirects = 4 sieve_max_script_size = 1M sieve_quota_max_scripts = 32 } protocols = imap pop3 lmtp sieve service auth-worker { user = vmail } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } unix_listener auth-userdb { mode = 0600 user = vmail } user = dovecot } service imap-login { inet_listener imap { port = 0 } inet_listener imaps { port = 993 ssl = yes } } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0600 user = postfix } } service managesieve-login { inet_listener sieve { port = 4190 } service_count = 1 vsz_limit = 128 M } service pop3-login { inet_listener pop3 { port = 0 } inet_listener pop3s { port = 995 ssl = yes } } ssl = required ssl_ca = </etc/ssl/my_certs/sub.class1.server.ca.pem ssl_cert = </etc/ssl/private/chig.in/mail/mail.chig.in.crt ssl_key = </etc/ssl/private/chig.in/mail/mail.chig.in.key userdb { args = uid=vmail gid=vmail home=/home/mail/vhosts/%d/%n driver = static } protocol lmtp { mail_plugins = expire sieve } protocol sieve { mail_max_userip_connections = 10 managesieve_implementation_string = Cyrus timsieved v2.2.13 managesieve_logout_format = bytes=%i/%o managesieve_max_compile_errors = 5 } --------------------- What exactly I did.... 1) dovecot.conf dict { expire = mysql:/etc/dovecot/dovecot-dict-expire-sql.conf.ext } 2) /etc/dovecot/dovecot-dict-expire-sql.conf.ext connect = host=127.0.0.1 dbname=mailserver user=mail password=SOMEPASS map { pattern = shared/expire/$user/$mailbox table = expires value_field = expire_stamp fields { username = $user mailbox = $mailbox } } 3) conf.d/10-mail.conf mail_plugins = expire 4) conf.d/90-plugin.conf plugin { #setting_name = value expire = Trash 7 expire_dict = proxy::expire } 5) Created table in mysql server mysql> show create table expires; +---------+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ | Table | Create Table | +---------+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ | expires | CREATE TABLE `expires` ( `username` varchar(75) NOT NULL, `mailbox` varchar(255) NOT NULL, `expire_stamp` int(11) NOT NULL, PRIMARY KEY (`username`,`mailbox`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8 | +---------+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ 1 row in set (0.00 sec) And nothing works dovecot debug shows nothing: only one string related to expire plugin Aug 24 04:21:37 piscola dovecot: lmtp(16927): Debug: Module loaded: /usr/lib/dovecot/modules/lib20_expire_plugin.so mysql general query log show nothing also... Can anyone help me please? Thanks a lot!

2 8

[Dovecot] SSL Cipher Order in Dovecot
by Marc Grooz 23 Aug '13

23 Aug '13

Hi, I want that dovecot uses PFS with my Apple Devices. I set the Cipher List to: ssl_cipher_list = DHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA:!aNULL:!eNULL:!LOW:!3DES:!MD5:!EXP:!CBC:!PSK:!SRP:!DSS:!SSLv2:!RC4 I got this from here: http://www.kuketz-blog.de/perfect-forward-secrecy-mit-apple-mail/ But then my only Outlook 2010 Client won't connect. If i enable rsa-aes128-SHA again on third place all clients connect without dhe. Dosen't dovecot horner the Cipher Order in the config? Kind regards Marc

1 0

[Dovecot] piegonhole sieve prepending header lines with an extra space
by Anand Kumria 23 Aug '13

23 Aug '13

Hi, I've noticed that the redirect sieve extension is placing an extra space before the headers of email when the 'redirect' command is used. Unfortunately this break gmail, yahoo, and most other email programs. I am using pigeonhole 0.4.0-14 with Dovecot 2.2.4.3; I see change 1781:e439789e3211 but it appears to only change how the X-Sieve header is generated. I only have the one dovecot instance but I will note that the setting 'mail_save_crlf = yes' is specified. Thanks, Anand

2 9

[Dovecot] Dovecot Dsync
by Ben 23 Aug '13

23 Aug '13

Hi, Sorry to bump it, but I've yet to receive even one reply to my question the other day about Dsync ? Everyone else seems to have been receiving replies to their questions and so I'm feeling a little lonely out in the cold. I can't believe nobody on-list uses Dsync ? Ben

4 6

[Dovecot] Logging passwords on auth failure/dealing with botnets
by Michael Smith (DF) 23 Aug '13

23 Aug '13

Hi, Since upgrading our mail servers to Postfix/Dovecot, we've seen a rather large increase in botnet brute force password attacks. I guess our old servers were too slow to suit their needs. Now, when they hit upon a valid user, it's easy to see what passwords they are trying (we've enabled auth_debug_passwords and set auth_verbose_passwords = plain). We can easily have log monitors pick up the blatant password attempts (123, 1234, 12345, 3.1415926, etc) and firewall them. Aug 22 00:21:47 host1 dovecot: auth-worker(1423): sql(aea,120.198.9.221): Password mismatch (given password: 3.1415926) However, when they are plugging away on an invalid user, all the logs show is 'unknown user'. The only way to see what they are doing is to tcpdump on the box. Almost 99% of the attacks are through SMTP/SASL attempts, using 'auth login'. Postfix is configured to use Dovecot for the authentication backend. NOTE: parens contain the base64 decoded values, this is not part of the data stream. C: auth login S: 334 VXNlcm5hbWU6 (334 Username:) C: YWVi (aeb) S: 334 UGFzc3dvcmQ6 (334 Password:) C: My4xNDE1OTI2 (3.1415926) S: 535 5.7.8 Error: authentication failed: UGFzc3dvcmQ6 (535 5.7.8 Error: authentication failed: Password:) Aug 22 11:00:31 host3 dovecot: auth-worker(19844): sql(aeb,120.198.9.221): unknown user How difficult would it be to add logging the given password, observing the auth_debug_passwords and auth_verbose_passwords settings, for all authentication failures? When we see certain patterns, we want to aggressively block those IPs, regardless of if it's a valid username or an unknown user. Or another option, is there any good DNS based RBLs for botnet IPs, and is there any way to tie that in to the dovecot auth system? I've been looking for botnet rbls, but what I've found so far doesn't seem to work very well. Most of the IPs that I've had to firewall don't exist in them. -- Michael Smith

3 2

Re: [Dovecot] Load goes up imap-login
by megodin＠inboxalias.com 22 Aug '13

22 Aug '13

Hi there Giles, not really a solution to your problem, but a hint: Try activating "verbose_proctitle = yes" in your dovecot.conf, restart service dovecot and you might get more information (when the load is produced by logged in users) - it gives you verbose information about which specific user with which IP is generating the high load. All the best, Megodin --- Alle PostfÃ¤cher an einem Ort. Jetzt wechseln und E-Mail-Adresse mitnehmen! http://email.freenet.de/basic/Informationen _________________________________________________________________ Send and receive anonymous emails to your inbox with InboxAlias. http://www.inboxalias.com

2 1

Re: [Dovecot] Sieve filterset not activating in Dovecot 2.0.15 with, Sieve plug-in and Roundcube 0.5.3: "NO (TRYLATER) Internal Error." (Steffen Kaiser)
by Joe Lourenco 22 Aug '13

22 Aug '13

Thank you Steffen Kaiser. I enabled the auth_debug and saw this error for permissions: Aug 22 13:41:44 managesieve($u): Error: sieve-storage: Creating symlink() /home/$u/.dovecot.sieve to sieve/Out of office.sieve failed: Permission denied The user's home directory was owned by root. Can not explain it why it was so. Thanks again! > On Wed, 21 Aug 2013, Joe Lourenco wrote: > > > roundcube: S: NO (TRYLATER) "Internal error occured. Refer to server log > > for more information. [2013-08-21 19:01:13]" > > > Nothing is showing up on the server log. > > Check out Dovecot's error log and search for that timestamp of the > message, it is there - unless, say, an out of disk error prevented the > logging. >

1 0

[Dovecot] Problem compiling 2.2.5
by Luciano Mannucci 22 Aug '13

22 Aug '13

I'm trying to upgrade a very old sparcstation running Solaris 8 which is running dovecot 1.x for few users. All I have for the task is good old gcc 2.95.2. The poor sod complains because it can't compute the sizeof(unsigned char prefix_text[]) at line 13 of log-error-buffer.c. Can I help it by - say - putting a constant between the '[]'? Or is it unfair? :-) I don't think it's woth modifying the distribution only for us owning machines that should be in a museum by now... Thanks for the good software, BTW, luciano. -- /"\ /Via A. Salaino, 7 - 20144 Milano (Italy) \ / ASCII RIBBON CAMPAIGN / PHONE : +39 2 485781 FAX: +39 2 48578250 X AGAINST HTML MAIL / E-MAIL: posthamster(a)sublink.sublink.ORG / \ AND POSTINGS / WWW: http://www.lesassaie.IT/

4 7

[Dovecot] Load goes up imap-login
by Giles Coochey 22 Aug '13

22 Aug '13

Every so often recently I've seen the load on my heavily under-used dovecot server (1 mailbox) rise up to 1 A top shows imap-login to causing the issue. I have checked /var/log/secure, /var/log/maillog, /var/log/messages and cannot see anything unusual. Anybody else seen something like this? # 2.2.5: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-358.14.1.el6.x86_64 x86_64 CentOS release 6.4 (Final) listen = * mail_location = maildir:~/.Maildir managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave mbox_write_locks = fcntl namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { driver = pam } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/.sieve } protocols = imap service imap { process_limit = 2048 } ssl_cert = </etc/pki/dovecot/certs/imap.crt ssl_key = </etc/pki/dovecot/private/imap.key userdb { driver = passwd } protocol lmtp { mail_plugins = sieve $mail_plugins } protocol lda { mail_plugins = sieve } protocol imap { mail_max_userip_connections = 50 } -- Regards, Giles Coochey, CCNP, CCNA, CCNAS NetSecSpec Ltd +44 (0) 8444 780677 +44 (0) 7983 877438 http://www.coochey.net http://www.netsecspec.co.uk giles(a)coochey.net

1 0

[Dovecot] combining pop3 and imap accounts
by Patrick Shirkey 22 Aug '13

22 Aug '13

HI, I have a working exim4 + dovecot system that uses system user folders for the inbox. exim4: domains = dsearch;/etc/exim4/virtual dovecot: mail_location = mbox:~/mail:INBOX=/var/mail/%u - I would like to add additional virtual accounts using the method described in this post: http://www.debian-administration.org/articles/302 exim4: /etc/exim4/conf.d/router/360_exim4-local_vdom_aliases vdom_aliases_maildir: debug_print = "R: vdom_aliases_maildir for $local_part@$domain" driver = redirect allow_defer allow_fail domains = dsearch;/var/mail/virtual data = /var/mail/virtual/$domain/$local_part/ directory_transport = address_directory pipe_transport = address_pipe file_transport = address_file dovecot: mail_location = maildir:/var/mail/virtual/%d/%n/ auth_userdb = passwd-file /etc/passwd.imap - I have read about "Namespace" but I am not sure if they will work with virtual pop3 and virtual imap accounts. as I also want to keep the existing pop3 setup without have to modify the location of the inbox for existing accounts pop3 accounts. It seems that exim4 is fine with this method but I am not sure about dovecot. Is it possible to have pop3 and imap running while also using multiple delivery folder locations for the mail_location directive? -- Patrick Shirkey Boost Hardware Ltd

1 0

[Dovecot] Sieve filterset not activating in Dovecot 2.0.15 with Sieve plug-in and Roundcube 0.5.3: "NO (TRYLATER) Internal Error."
by Joe Lourenco 22 Aug '13

22 Aug '13

Hello Everyone, I am running Dovecot 2.0.15 with its Sieve plug-in, and Roundcube 0.5.3. I have a problem with just one particular user, who after creating a filters set and creating a filter in Roundcube, this user cannot activate the filters set. At first, this user could not create a filter at all. That was resolved by creating the "sieve" directory with the right permissions in his /home. Logs show the following when trying to activate the filters set via the Roundcube: roundcube: S: NO (TRYLATER) "Internal error occured. Refer to server log for more information. [2013-08-21 19:01:13]" Nothing is showing up on the server log. I have tried to activate the filter via the Sieve command line, authenticating the user, then running "SETACTIVE "roundcube"", but the error is the same, an internal server error. Again, I can successfully do this via the command line or Roundcube, from say, my userid. I appreciate any help. -- Joe Lourenco Systems Administrator C & C Technologies Cell: 55-21-8596-0078 Phone: 55-21-2499-9591

2 1

[Dovecot] dovecot2, antispam and sieve versions
by Terry Barnum 22 Aug '13

22 Aug '13

I'm currently running dovecot2 v2.2.5 with dovecot2-antispam 0.0-51 and dovecot2-sieve 0.4.1, all via macports. If one wanted to downgrade to dovecot v2.2.0, would these versions of antispam and sieve still be okay to use? The reason for the question is I'm trying to diagnose a mailserver problem where after 2-6 days the machine goes deaf. Absolutely nothing of interest in any logfile that I can see except for an imap-login process crash which got me thinking about a downgrade test. Thanks, -Terry Terry Barnum digital OutPost http://www.dop.com

1 0

[Dovecot] Dovecot antispam plugin for 2.2
by Micah Anderson 21 Aug '13

21 Aug '13

Hello, I recently was looking to update to dovecot 2.2 and I have been happily using the dovecot-antispam plugin in 2.1, but found that there have been some changes in dovecot that make this version not compile against 2.2. I'm wondering if Johannes you have any plans to update it, or if others have managed to figure out what is necessary to get it to work? The particular piece that I am currently stuck on is that the dict_init() in dovecot now requires more arguments than in previous versions, it now requires this: int dict_init(const char *uri, enum dict_data_type value_type, const char *username, const char *base_dir, struct dict **dict_r, const char **error_r); but previously, we only needed four arguments. Now we need to know what to supply for '**dict_r' and '**error_r'. Any advise/help would be appreciated: make[1]: Entering directory `/home/micah/debian/dovecot-antispam/dovecot-antispam-2.0+20120225' cc -DHAVE_CONFIG_H -I/usr/include/dovecot/ -I/usr/include/dovecot/src/ -I/usr/include/dovecot/src/lib/ -I/usr/include/dovecot/src/lib-storage/ -I/usr/include/dovecot/src/lib-mail/ -I/usr/include/dovecot/src/lib-imap/ -I/usr/include/dovecot/src/lib-dict/ -I/usr/include/dovecot/src/lib-index/ -I/usr/include/dovecot/src/imap/ -o dovecot-version dovecot-version.c ./dovecot-version > dovecot-version.h CC antispam-storage.o In file included from antispam-storage-2.2.c:20:0, from antispam-storage.c:3: antispam-plugin.h: In function ‘string_dict_init’: antispam-plugin.h:288:2: error: too few arguments to function ‘dict_init’ return dict_init(uri, DICT_DATA_TYPE_STRING, username, NULL); ^ In file included from antispam-plugin.h:13:0, from antispam-storage-2.2.c:20, from antispam-storage.c:3: /usr/include/dovecot/dict.h:34:5: note: declared here int dict_init(const char *uri, enum dict_data_type value_type, ^ micah

2 1

[Dovecot] Dsync confusion...
by Ben 21 Aug '13

21 Aug '13

Hi, Maybe I've been staring at config files and man pages too long, but the doc page for Dsync is a little confusing and I don't how to solve my problem. I've probably missed something simple and stupid, but as I said, I've been staring at this problem too long and need a second pair of eyes on it ! Per doveconf below the user/owner for auth db is a user with shell /bin/false. Root SSH login is also disabled on the target machine, so I need to use a script user to do the sync. I installed dovecot on the target host and config'd it as per the second doveconf below But all I ever get are errors such as : su -c "dsync -u test(a)somewhere.example.com backup its-virtmail(a)somewhere.example.com" its_scripts dsync(its_scripts): Fatal: setuid(1001(its-virtmail) from userdb lookup) failed with euid=1002(its_scripts): Operation not permitted (This binary should probably be called with process user set to 1001(its-virtmail) instead of 1002(its_scripts)) root@ukc-vm02-mx01:/etc/dovecot/conf.d# dsync(its_scripts): Error: userdb lookup: connect(/var/run/dovecot/auth-userdb) failed: Permission denied (euid=1002(its_scripts) egid=1002(its_scripts) missing +r perm: /var/run/dovecot/auth-userdb, dir owned by 0:0 mode=0755) Even if I temporarily give /bin/sh and an ssh key to the dovecot user, I still can't get it to work : ssh its-virtmail(a)somewhere.example.com dsync -u test(a)example.com dsync(its-virtmail): Error: user test(a)somewhere.example.com: Initialization failed: mail_location not set and autodetection failed: Mail storage autodetection failed with home=/srv/mail/example.com/test dsync(its-virtmail): Fatal: User init failed dsync-local(test(a)somewhere.example.com): Error: read() from worker server failed: EOF # SOURCE HOST # 2.0.19: /etc/dovecot/dovecot.conf # OS: Linux 3.5.0-37-generic x86_64 Ubuntu 12.04.2 LTS auth_verbose = yes auth_verbose_passwords = sha1 mail_location = maildir:~/Maildir managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave passdb { args = scheme=CRYPT username_format=%u /etc/dovecot/users driver = passwd-file } plugin { fts = solr fts_solr = url=http://localhost:8080/solr/ sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap lmtp sieve service auth { unix_listener /var/spool/postfix/private/dovecot-auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { group = its-virtmail mode = 0660 user = its-virtmail } } service imap-login { process_min_avail = 3 } service lmtp { process_min_avail = 5 unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0600 user = postfix } user = its-virtmail } service managesieve-login { inet_listener sieve { port = 4190 } inet_listener sieves { port = 5190 ssl = yes } process_min_avail = 3 } ssl = required ssl_cert = </etc/ssl/certs/mx_example.com.pem ssl_cipher_list = TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!3DES:!PSK:@STRENGTH ssl_key = </etc/ssl/private/mx_example.com.key userdb { args = username_format=%u /etc/dovecot/users driver = passwd-file } protocol imap { imap_client_workarounds = delay-newmail mail_max_userip_connections = 10 mail_plugins = fts fts_solr } protocol pop3 { mail_max_userip_connections = 10 pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } protocol lda { deliver_log_format = msgid=%m: %$ mail_plugins = sieve postmaster_address = postmaster quota_full_tempfail = yes rejection_reason = Your message to <%t> was automatically rejected:%n%r } protocol lmtp { mail_plugins = sieve postmaster_address = postmaster(a)example.com } #DEST HOST # 2.0.19: /etc/dovecot/dovecot.conf # OS: Linux 3.5.0-37-generic x86_64 Ubuntu 12.04.2 LTS auth_verbose = yes auth_verbose_passwords = sha1 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave passdb { args = scheme=CRYPT username_format=%u /etc/dovecot/users driver = passwd-file } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = " imap lmtp sieve" service auth { unix_listener auth-userdb { group = its-virtmail user = its-virtmail } } service lmtp { process_min_avail = 3 user = its-virtmail } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { args = username_format=%u /etc/dovecot/users driver = passwd-file }

3 3

[Dovecot] Question: dovecot-1.2.17 , pop3
by Kutrus Neloy 21 Aug '13

21 Aug '13

Hi, you have written in your Dovecot 2.2.5 - Changelog that you have solved a Problem with pop3. *· pop3: Avoid assert-crash if client disconnects during LIST.* My question is: Is it possible to get this problem with my version? 1.2.17 ? Thanks

4 4

[Dovecot] username and password can't be verified
by Eric Kom 21 Aug '13

21 Aug '13

Good day Folks, I am trying to setup a mail server based on dovecot(with imap and pop3) and postfix as a smtp on debian jessie/sid. The login its system user. After I have tried to configure the client (Icedove), this last can find the imap, pop3 and smtp servers; but the can't be verified. Please see below my dovecot, postfix configurations and log details. erickom@ajk:/etc/postfix$ doveconf -n # 2.2.5 (c4f754d6967e): /etc/dovecot/dovecot.conf # OS: Linux 3.10-2-486 i686 Debian jessie/sid ext4 auth_debug = yes auth_debug_passwords = yes auth_mechanisms = plain login base_dir = /var/run/dovecot/ disable_plaintext_auth = no login_greeting = Great Kom, ready. mail_debug = yes mail_location = maildir:/var/mail/%d/%n/Maildir managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { driver = pam } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = " imap sieve pop3" service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } } service pop3-login { inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 ssl = yes } } ssl_cert = </etc/dovecot/dovecot.pem ssl_key = </etc/dovecot/private/dovecot.pem userdb { driver = passwd } erickom@ajk:/etc/postfix$ sudo postconf -n [sudo] password for erickom: alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix debug_peer_list = problem.domain home_mailbox = Maildir/ inet_interfaces = all inet_protocols = all mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 mydestination = metropolitanbuntu.co.za, ajk.metropolitanbuntu.co.za, localhost.metropolitanbuntu.co.za, localhost, metropolitan.org.za myhostname = ajk.metropolitanbuntu.co.za mynetworks = 127.0.0.0/8 10.0.0.0/24 myorigin = /etc/mailname readme_directory = no recipient_delimiter = + smtp_tls_cert_file = /etc/ssl/certs/smtpd.crt smtp_tls_key_file = /etc/ssl/private/smtpd.hey smtp_tls_loglevel = 1 smtp_tls_note_starttls_offer = yes smtp_tls_security_level = may smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = Great Kom Networks (Pty) LTD, Ready. smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_received_header = yes smtpd_tls_security_level = may smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes Aug 20 09:02:36 ajk postfix/smtpd[16966]: connect from unknown[10.0.0.103] Aug 20 09:02:36 ajk postfix/smtpd[16966]: improper command pipelining after EHLO from unknown[10.0.0.103]: QUIT\r\n Aug 20 09:02:36 ajk postfix/smtpd[16966]: disconnect from unknown[10.0.0.103] Aug 20 09:02:36 ajk dovecot: auth: Debug: auth client connected (pid=17032) Aug 20 09:02:36 ajk dovecot: imap-login: Aborted login (no auth attempts in 0 secs): user=<>, rip=10.0.0.103, lip=10.0.0.244, session=<xjZOpFvkSAAKAABn> Aug 20 09:02:57 ajk postfix/smtpd[16966]: connect from unknown[10.0.0.103] Aug 20 09:02:57 ajk postfix/smtpd[16966]: improper command pipelining after EHLO from unknown[10.0.0.103]: QUIT\r\n Aug 20 09:02:57 ajk postfix/smtpd[16966]: disconnect from unknown[10.0.0.103] Aug 20 09:02:57 ajk dovecot: auth: Debug: auth client connected (pid=17037) Aug 20 09:02:57 ajk dovecot: imap-login: Aborted login (no auth attempts in 0 secs): user=<>, rip=10.0.0.103, lip=10.0.0.244, session=<Vz6IpVvkSgAKAABn> Aug 20 09:03:03 ajk dovecot: auth: Debug: auth client connected (pid=17040) Aug 20 09:03:03 ajk dovecot: auth: Debug: client in: AUTH#0111#011PLAIN#011service=imap#011session=okfspVvkTAAKAABn#011lip=10.0.0.244#011rip=10.0.0.103#011lport=143#011rport=57164 Aug 20 09:03:03 ajk dovecot: auth: Debug: client passdb out: CONT#0111#011 Aug 20 09:03:03 ajk dovecot: auth: Debug: client in: CONT#0111#011AGVyaWNrb21AbWV0cm9wb2xpdGFuLm9yZy56YQBuaW5hMDEwMTgzYw== (previous base64 data may contain sensitive data) Aug 20 09:03:03 ajk dovecot: auth-worker(17041): Debug: Loading modules from directory: /usr/lib/dovecot/modules/auth Aug 20 09:03:03 ajk dovecot: auth-worker(17041): Debug: Module loaded: /usr/lib/dovecot/modules/auth/libdriver_mysql.so Aug 20 09:03:03 ajk dovecot: auth-worker(17041): Debug: pam(erickom(a)metropolitan.org.za,10.0.0.103): lookup service=dovecot Aug 20 09:03:03 ajk dovecot: auth-worker(17041): Debug: pam(erickom(a)metropolitan.org.za,10.0.0.103): #1/1 style=1 msg=Password: Aug 20 09:03:06 ajk dovecot: auth-worker(17041): pam(erickom(a)metropolitan.org.za,10.0.0.103): pam_authenticate() failed: Authentication failure (password mismatch?) (given password: ni$ Aug 20 09:03:08 ajk dovecot: auth: Debug: client passdb out: FAIL#0111#011user=erickom(a)metropolitan.org.za Aug 20 09:03:08 ajk dovecot: auth: Debug: client in: AUTH#0112#011LOGIN#011service=imap#011session=okfspVvkTAAKAABn#011lip=10.0.0.244#011rip=10.0.0.103#011lport=143#011rport=57164 Aug 20 09:03:12 ajk dovecot: auth: Debug: client passdb out: CONT#0112#011VXNlcm5hbWU6 Aug 20 09:03:12 ajk dovecot: auth: Debug: client in: CONT#0112#011ZXJpY2tvbUBtZXRyb3BvbGl0YW4ub3JnLnph (previous base64 data may contain sensitive data) Aug 20 09:03:12 ajk dovecot: auth: Debug: client passdb out: CONT#0112#011UGFzc3dvcmQ6 Aug 20 09:03:12 ajk dovecot: auth: Debug: client in: CONT#0112#011bmluYTAxMDE4M2M= (previous base64 data may contain sensitive data) Aug 20 09:03:12 ajk dovecot: auth-worker(17041): Debug: pam(erickom(a)metropolitan.org.za,10.0.0.103): lookup service=dovecot Aug 20 09:03:12 ajk dovecot: auth-worker(17041): Debug: pam(erickom(a)metropolitan.org.za,10.0.0.103): #1/1 style=1 msg=Password: Aug 20 09:03:14 ajk dovecot: auth-worker(17041): pam(erickom(a)metropolitan.org.za,10.0.0.103): pam_authenticate() failed: Authentication failure (password mismatch?) (given password: ni$ Aug 20 09:03:16 ajk dovecot: auth: Debug: client passdb out: FAIL#0112#011user=erickom(a)metropolitan.org.za Aug 20 09:03:16 ajk dovecot: auth: Debug: client in: AUTH#0113#011PLAIN#011service=imap#011session=okfspVvkTAAKAABn#011lip=10.0.0.244#011rip=10.0.0.103#011lport=143#011rport=57164#011r$ Aug 20 09:03:20 ajk dovecot: auth-worker(17041): Debug: pam(erickom(a)metropolitan.org.za,10.0.0.103): lookup service=dovecot Aug 20 09:03:20 ajk dovecot: auth-worker(17041): Debug: pam(erickom(a)metropolitan.org.za,10.0.0.103): #1/1 style=1 msg=Password: Aug 20 09:03:22 ajk dovecot: auth-worker(17041): pam(erickom(a)metropolitan.org.za,10.0.0.103): pam_authenticate() failed: Authentication failure (password mismatch?) (given password: ni$ Aug 20 09:03:24 ajk dovecot: auth: Debug: client passdb out: FAIL#0113#011user=erickom(a)metropolitan.org.za Aug 20 09:03:24 ajk dovecot: imap-login: Disconnected (auth failed, 3 attempts in 21 secs): user=<erickom(a)metropolitan.org.za>, method=PLAIN, rip=10.0.0.103, lip=10.0.0.244, session=<o$ Thanks for you assistance. -- Kind Regards Eric Kom System Administrator & Programmer - Metropolitan College _________________________________________ / You are scrupulously honest, frank, and \ | straightforward. Therefore you have few | \ friends. / ----------------------------------------- \ \ .--. |o_o | |:_/ | // \ \ (| Kom | ) /'\_ _/`\ \___)=(___/ 2 Hennie Van Till, White River, 1240 Tel: 013 750 2255 | Fax: 013 750 0105 | Cell: 078 879 1334 erickom(a)kom.za.net | erickom(a)metropolitancollege.co.za www.kom.za.net | www.kom.za.org | www.erickom.co.za Key fingerprint: 513E E91A C243 3020 8735 09BB 2DBC 5AD7 A9DA 1EF5

4 6