- dovecot - dovecot.org

[Dovecot] Conditionally use a sieve script with deliver?
by Kārlis Repsons 22 Jan '10

22 Jan '10

I found a post in this list [0], which says sieve scripts can be used to deliver mail as read. However, can it be done somehow conditionally, I mean, with a direct or indirect switch for deliver? For a nonexistent example, it would be simply < | deliver -m path/to/maildir -r > or maybe an environment variable could be exported to deliver sieve and checked there? (Still not sure if sieve can replace maildrop in my case, however, using it with dovecot creates various problems with interoperability; but perhaps I can just add those imap4flags like "\\seen" myself to the message with maildrop and avoid mess with sieve at all?) [0] http://www.dovecot.org/list/dovecot/2008-July/032294.html

4 6

[Dovecot] IDLE timing issue - dovecot or fetchmail issue?
by Matt Doran 22 Jan '10

22 Jan '10

Hi guys, Thanks for the great product. We've used dovecot for ages as our internal mail server and it works great! I've recently started using fetchmail 6.3.9 (with IDLE enabled) to download mail from our ISP (Pair networks). The ISP is running Dovecot 1.1.16. I am unable to get the info about the dovecot config at this time. The IDLE support in fetchmail allows us to deliver mail near instantaneously without the need to poll (which is what we did previously using POP3). However I've noticed an issue where if 2 mails are delivered in quick succession fetchmail will only download the first email, and the second will not download. If I then send in another test email this triggers the download of 2 emails (the original that wasn't downloaded and the test email). Now I'm wondering whether the issue lies with Dovecot (e.g. a timing issue), or is it fetchmail that isn't implementing the IDLE/download properly. I've attached the output of a fetchmail session showing this problem in action (I've added some annotations to this file starting with >>>>>). The sequence of events are: * Start fetchmail with IDLE enabled * Send 2 emails in quick succession. * Dovecot notifies of the new message * Fetchmail downloads the message * Fetchmail initiates a new IDLE * Then nothing more is delivered. :( * I then send another email, which triggers the 2 to download. I don't know enough about IMAP to understand whether the problem lies with Dovecot or Fetchmail. Hopefully an IMAP expert will be able to see from the attached IMAP session. Regards, -- Matt Doran PaperCut Software International Pty. Ltd. http://www.papercut.com/ Phone: +61 3 9809 5194 fetchmail: 6.3.9-rc2 querying mail.XXXX.com (protocol IMAP) at Tue 12 Jan 2010 13:17:38 EST: poll started Trying to connect to 216.92.193.84/143...connected. fetchmail: IMAP< * OK Dovecot ready. fetchmail: IMAP> A0001 CAPABILITY fetchmail: IMAP< * CAPABILITY IMAP4rev1 SASL-IR SORT THREAD=REFERENCES MULTIAPPEND UNSELECT LITERAL+ IDLE CHILDREN NAMESPACE LOGIN-REFERRALS UIDPLUS LIST-EXTENDED I18NLEVEL=1 QUOTA STARTTLS AUTH=PLAIN AUTH=LOGIN fetchmail: IMAP< A0001 OK Capability completed. fetchmail: will idle after poll fetchmail: IMAP> A0002 STARTTLS fetchmail: IMAP< A0002 OK Begin TLS negotiation now. <snip TLS stuff> fetchmail: IMAP> A0003 CAPABILITY fetchmail: IMAP< * CAPABILITY IMAP4rev1 SASL-IR SORT THREAD=REFERENCES MULTIAPPEND UNSELECT LITERAL+ IDLE CHILDREN NAMESPACE LOGIN-REFERRALS UIDPLUS LIST-EXTENDED I18NLEVEL=1 QUOTA AUTH=PLAIN AUTH=LOGIN fetchmail: IMAP< A0003 OK Capability completed. fetchmail: will idle after poll fetchmail: mail.XXXX.com: upgrade to TLS succeeded. fetchmail: IMAP> A0004 LOGIN "matt" * fetchmail: IMAP< A0004 OK Logged in. fetchmail: IMAP> A0005 SELECT "INBOX" fetchmail: IMAP< * FLAGS (\Answered \Flagged \Deleted \Seen \Draft Junk NonJunk) fetchmail: IMAP< * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft Junk NonJunk \*)] Flags permitted. fetchmail: IMAP< * 0 EXISTS fetchmail: IMAP< * 0 RECENT fetchmail: IMAP< * OK [UIDVALIDITY 1227629703] UIDs valid fetchmail: IMAP< * OK [UIDNEXT 76875] Predicted next UID fetchmail: IMAP< A0005 OK [READ-WRITE] Select completed. fetchmail: IMAP> A0006 IDLE fetchmail: IMAP< + idling fetchmail: IMAP< * 1 EXISTS fetchmail: IMAP> DONE fetchmail: IMAP< * 1 RECENT fetchmail: IMAP< A0006 OK Idle completed. fetchmail: IMAP> A0007 SEARCH UNSEEN NOT DELETED fetchmail: IMAP< * SEARCH 1 fetchmail: IMAP< A0007 OK Search completed (0.000 secs). 1 message for matt at mail.XXXX.com. fetchmail: IMAP> A0008 FETCH 1 RFC822.SIZE fetchmail: IMAP< * 1 FETCH (RFC822.SIZE 11068) fetchmail: IMAP< A0008 OK Fetch completed. fetchmail: IMAP> A0009 FETCH 1 RFC822.HEADER fetchmail: IMAP< * 1 FETCH (RFC822.HEADER {1651} reading message matt@XXXX.com:1 of 1 (1651 header octets) Trying to connect to 127.0.0.1/25...connected. fetchmail: SMTP< 220 smaug.XXXXX.com ESMTP Exim 4.69 Tue, 12 Jan 2010 13:17:56 +1100 fetchmail: SMTP> EHLO smaug.XXXXX.com fetchmail: SMTP< 250-smaug.XXXXX.com Hello matt at localhost [127.0.0.1] fetchmail: SMTP< 250-SIZE 52428800 fetchmail: SMTP< 250-PIPELINING fetchmail: SMTP< 250 HELP fetchmail: SMTP> MAIL FROM:<test-orders(a)XXXX.com> SIZE=11068 fetchmail: SMTP< 250 OK fetchmail: SMTP> RCPT TO:<matt@localhost> fetchmail: SMTP< 250 Accepted fetchmail: SMTP> DATA fetchmail: SMTP< 354 Enter message, ending with "." on a line by itself # fetchmail: IMAP< ) fetchmail: IMAP< A0009 OK Fetch completed. fetchmail: IMAP> A0010 FETCH 1 BODY.PEEK[TEXT] fetchmail: IMAP< * 1 FETCH (BODY[TEXT] {9417} (9417 body octets)**************************.*************.*************.*************.*************.*************.*************.*************.**************.****** fetchmail: IMAP< ) fetchmail: IMAP< A0010 OK Fetch completed. fetchmail: SMTP>. (EOM) fetchmail: SMTP< 250 OK id=1NUWKS-0004rr-5f flushed fetchmail: IMAP> A0011 STORE 1 +FLAGS (\Seen \Deleted) fetchmail: IMAP< * 1 FETCH (FLAGS (\Deleted \Seen \Recent)) fetchmail: IMAP< * 2 EXISTS fetchmail: IMAP< * 2 RECENT fetchmail: IMAP< A0011 OK Store completed. fetchmail: IMAP> A0012 EXPUNGE fetchmail: IMAP< * 1 EXPUNGE fetchmail: IMAP< * 1 RECENT fetchmail: IMAP< A0012 OK Expunge completed. fetchmail: SMTP> QUIT fetchmail: SMTP< 221 smaug.XXXXX.com closing connection fetchmail: IMAP> A0013 IDLE fetchmail: IMAP< + idling >>>>> At this point only one message was delivered >>>>> >>>>> The following occurred after I sent in another email >>>>> which triggered the IDLE notification and both were downloaded fetchmail: IMAP< * 2 EXISTS fetchmail: IMAP> DONE fetchmail: IMAP< * 2 RECENT fetchmail: IMAP< A0013 OK Idle completed. fetchmail: IMAP> A0014 SEARCH UNSEEN NOT DELETED fetchmail: IMAP< * SEARCH 1 2 fetchmail: IMAP< A0014 OK Search completed (0.000 secs). 2 messages for matt at mail.XXXX.com. fetchmail: IMAP> A0015 FETCH 1:2 RFC822.SIZE fetchmail: IMAP< * 1 FETCH (RFC822.SIZE 14548) fetchmail: IMAP< * 2 FETCH (RFC822.SIZE 1723) fetchmail: IMAP< A0015 OK Fetch completed. fetchmail: IMAP> A0016 FETCH 1 RFC822.HEADER fetchmail: IMAP< * 1 FETCH (RFC822.HEADER {1655} reading message matt@XXXX.com:1 of 2 (1655 header octets) Trying to connect to 127.0.0.1/25...connected. fetchmail: SMTP< 220 smaug.XXXXX.com ESMTP Exim 4.69 Tue, 12 Jan 2010 13:18:27 +1100 fetchmail: SMTP> EHLO smaug.XXXXX.com fetchmail: SMTP< 250-smaug.XXXXX.com Hello matt at localhost [127.0.0.1] fetchmail: SMTP< 250-SIZE 52428800 fetchmail: SMTP< 250-PIPELINING fetchmail: SMTP< 250 HELP fetchmail: SMTP> MAIL FROM:<test-orders(a)XXXX.com> SIZE=14548 fetchmail: SMTP< 250 OK fetchmail: SMTP> RCPT TO:<matt@localhost> fetchmail: SMTP< 250 Accepted fetchmail: SMTP> DATA fetchmail: SMTP< 354 Enter message, ending with "." on a line by itself # fetchmail: IMAP< ) fetchmail: IMAP< A0016 OK Fetch completed. fetchmail: IMAP> A0017 FETCH 1 BODY.PEEK[TEXT] fetchmail: IMAP< * 1 FETCH (BODY[TEXT] {12893} (12893 body octets)*********************************.*************.*************.*************.*************.*************.******************.*****************.**************.*************.*************.*************.*********** fetchmail: IMAP< ) fetchmail: IMAP< A0017 OK Fetch completed. fetchmail: SMTP>. (EOM) fetchmail: SMTP< 250 OK id=1NUWKx-0004sC-MW flushed fetchmail: IMAP> A0018 STORE 1 +FLAGS (\Seen \Deleted) fetchmail: IMAP< * 1 FETCH (FLAGS (\Deleted \Seen \Recent)) fetchmail: IMAP< A0018 OK Store completed. fetchmail: IMAP> A0019 EXPUNGE fetchmail: IMAP< * 1 EXPUNGE fetchmail: IMAP< * 1 RECENT fetchmail: IMAP< A0019 OK Expunge completed. fetchmail: IMAP> A0020 FETCH 1 RFC822.HEADER fetchmail: IMAP< * 1 FETCH (RFC822.HEADER {1603} reading message matt@XXXX.com:2 of 2 (1603 header octets) fetchmail: SMTP> MAIL FROM:<matt.doran(a)XXXX.com> SIZE=1723 fetchmail: SMTP< 250 OK fetchmail: SMTP> RCPT TO:<matt@localhost> fetchmail: SMTP< 250 Accepted fetchmail: SMTP> DATA fetchmail: SMTP< 354 Enter message, ending with "." on a line by itself # fetchmail: IMAP< ) fetchmail: IMAP< A0020 OK Fetch completed. fetchmail: IMAP> A0021 FETCH 1 BODY.PEEK[TEXT] fetchmail: IMAP< * 1 FETCH (BODY[TEXT] {120} (120 body octets)********* fetchmail: IMAP< ) fetchmail: IMAP< A0021 OK Fetch completed. fetchmail: SMTP>. (EOM) fetchmail: SMTP< 250 OK id=1NUWL0-0004sC-0s flushed fetchmail: IMAP> A0022 STORE 1 +FLAGS (\Seen \Deleted) fetchmail: IMAP< * 1 FETCH (FLAGS (\Deleted \Seen \Recent)) fetchmail: IMAP< A0022 OK Store completed. fetchmail: IMAP> A0023 EXPUNGE fetchmail: IMAP< * 1 EXPUNGE fetchmail: IMAP< * 0 RECENT fetchmail: IMAP< A0023 OK Expunge completed. fetchmail: SMTP> QUIT fetchmail: SMTP< 221 smaug.XXXXX.com closing connection fetchmail: IMAP> A0024 IDLE fetchmail: IMAP< + idling

4 6

[Dovecot] IMAP only for some users or via webmail
by Federico Tomasczik 22 Jan '10

22 Jan '10

Hello! First, sorry for my English... I'm a newbie with Dovecot and I have some questions, I'm testing Dovecot 1.1.11 in a virtual machine. I wish in the future, migrate this to a real server. Ok, but i need this: 1) A group of users can use IMAP or POP3. 2) The others, only can use POP3. But, this users can use IMAP only with a webmail (the webmail is in the same server that Dovecot) It is possible? How? Thanks! Federico Ch. Tomasczik

3 2

[Dovecot] 1.2.9 imap crash with backtrace
by Ralf Hildebrandt 21 Jan '10

21 Jan '10

>From the log: Jan 3 20:26:07 postamt dovecot: IMAP(nixxxxx): copy: uid=3526, dest=Deleted Messages, msgid=<DC8A4BE5-41A0-4240-8F07-090E95414F7A(a)charite.de>, size=2726 Jan 3 20:26:07 postamt dovecot: IMAP(nixxxxx): delete: uid=3526, msgid=<DC8A4BE5-41A0-4240-8F07-090E95414F7A(a)charite.de> Jan 3 20:26:11 postamt dovecot: IMAP(nixxxxx): expunge: uid=3526, msgid=<DC8A4BE5-41A0-4240-8F07-090E95414F7A(a)charite.de>, size=2726 Jan 3 20:26:42 postamt dovecot: IMAP(nixxxxx): copy: uid=415, box=Deleted Messages, dest=INBOX, msgid=<d539ffeb1001030758n1acc33c1m1fc67e0f1d227e92(a)mail.gmail.com>, size=3604 Jan 3 20:26:42 postamt dovecot: IMAP(nixxxxx): /home/n/i/nixxxxx/Maildir/dovecot-uidlist: Duplicate file entry at line 1: 1262534293.M822904P8880.postamt.charite.de,S=3604,W=3690:2,RSaf (uid 3528 -> 3531) Jan 3 20:26:42 postamt dovecot: IMAP(nixxxxx): Panic: file maildir-uidlist.c: line 403 (maildir_uidlist_records_array_delete): assertion failed: (pos != NULL) Jan 3 20:26:42 postamt dovecot: IMAP(nixxxxx): Raw backtrace: imap [0x80f1631] -> imap [0x80f16a2] -> imap [0x80f1019] -> imap [0x8088fa6] -> imap(maildir_uidlist_refresh+0x9e9) [0x8089fc9] -> imap [0x8086704] -> imap(maildir_storage_sync_init+0x125) [0x8086be5] -> imap(imap_sync_init+0x54) [0x8070434] -> imap [0x8062aa2] -> imap [0x80a619c] -> imap(io_loop_handle_timeouts+0xe9) [0x80f9959] -> imap(io_loop_handler_run+0x82) [0x80fa222] -> imap(io_loop_run+0x20) [0x80f96f0] -> imap(main+0x5d2) [0x8070f52] -> /lib/i686/cmov/libc.so.6(__libc_start_main+0xe5) [0xb75bcb55] -> imap [0x80602d1] Jan 3 20:26:42 postamt dovecot: IMAP(nixxxxx): delete: uid=415, box=Deleted Messages, msgid=<d539ffeb1001030758n1acc33c1m1fc67e0f1d227e92(a)mail.gmail.com> Jan 3 20:26:42 postamt dovecot: IMAP(nixxxxx): expunge: uid=415, box=Deleted Messages, msgid=<d539ffeb1001030758n1acc33c1m1fc67e0f1d227e92(a)mail.gmail.com>, size=3604 Jan 3 20:26:45 postamt dovecot: IMAP(nixxxxx): Disconnected: Logged out bytes=63917/47203 Jan 3 20:26:45 postamt dovecot: IMAP(nixxxxx): Disconnected: Logged out bytes=360/168380 Jan 3 20:26:45 postamt dovecot: IMAP(nixxxxx): Disconnected: Logged out bytes=670290/672304 GNU gdb (GDB) 7.0-debian Copyright (C) 2009 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "i486-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /usr/local/libexec/dovecot/imap...done. Reading symbols from /lib/i686/cmov/libdl.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libdl-2.10.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/i686/cmov/libdl.so.2 Reading symbols from /lib/i686/cmov/librt.so.1...Reading symbols from /usr/lib/debug/lib/i686/cmov/librt-2.10.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/i686/cmov/librt.so.1 Reading symbols from /lib/i686/cmov/libc.so.6...Reading symbols from /usr/lib/debug/lib/i686/cmov/libc-2.10.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/i686/cmov/libc.so.6 Reading symbols from /lib/ld-linux.so.2...Reading symbols from /usr/lib/debug/lib/ld-2.10.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/ld-linux.so.2 Reading symbols from /lib/i686/cmov/libpthread.so.0...Reading symbols from /usr/lib/debug/lib/i686/cmov/libpthread-2.10.2.so...done. (no debugging symbols found)...done. Loaded symbols for /lib/i686/cmov/libpthread.so.0 Reading symbols from /usr/local/lib/dovecot/imap/lib10_quota_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib10_quota_plugin.so Reading symbols from /usr/local/lib/dovecot/imap/lib11_imap_quota_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib11_imap_quota_plugin.so Reading symbols from /usr/local/lib/dovecot/imap/lib11_trash_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib11_trash_plugin.so Reading symbols from /usr/local/lib/dovecot/imap/lib20_autocreate_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib20_autocreate_plugin.so Reading symbols from /usr/local/lib/dovecot/imap/lib20_fts_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib20_fts_plugin.so Reading symbols from /usr/local/lib/dovecot/imap/lib20_mail_log_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib20_mail_log_plugin.so Reading symbols from /usr/local/lib/dovecot/imap/lib20_zlib_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib20_zlib_plugin.so Reading symbols from /usr/lib/libz.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libz.so.1 Reading symbols from /lib/libbz2.so.1.0...(no debugging symbols found)...done. Loaded symbols for /lib/libbz2.so.1.0 Reading symbols from /usr/local/lib/dovecot/imap/lib21_fts_squat_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib21_fts_squat_plugin.so Reading symbols from /lib/libgcc_s.so.1...(no debugging symbols found)...done. Loaded symbols for /lib/libgcc_s.so.1 Core was generated by `imap [nixxxxx 87.162.56.10]'. Program terminated with signal 6, Aborted. #0 0xb7708424 in __kernel_vsyscall () #0 0xb7708424 in __kernel_vsyscall () No symbol table info available. #1 0xb75d08e0 in *__GI_raise (sig=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:64 resultvar = <value optimized out> pid = -1217490956 selftid = 25023 #2 0xb75d3e15 in *__GI_abort () at abort.c:88 act = {__sigaction_handler = {sa_handler = 0x9505708, sa_sigaction = 0x9505708}, sa_mask = {__val = {3219827960, 135197034, 3077474016, 0, 3219828080, 3219828068, 128, 0, 0, 3219828144, 3077727856, 134566866, 549, 0, 0, 0, 1, 135270350, 128, 1, 3219828068, 156260072, 69, 3219828196, 3219828040, 135198630, 156260653, 3219828068, 3219828072, 550, 156260104, 3076940867}}, sa_flags = 550, sa_restorer = 0x8106dd9 <write_full+57>} sigs = {__val = {32, 0 <repeats 31 times>}} #3 0x080f1645 in default_fatal_finish (type=<value optimized out>, status=0) at failures.c:160 backtrace = 0x95052d8 "imap [0x80f1631] -> imap [0x80f16a2] -> imap [0x80f1019] -> imap [0x8088fa6] -> imap(maildir_uidlist_refresh+0x9e9) [0x8089fc9] -> imap [0x8086704] -> imap(maildir_storage_sync_init+0x125) [0x8086be5]"... #4 0x080f16a2 in i_internal_fatal_handler (type=LOG_TYPE_PANIC, status=0, fmt=0x8109e2c "file %s: line %d (%s): assertion failed: (%s)", args=0xbfeaae44 ":\355\020\b\223\001") at failures.c:443 No locals. #5 0x080f1019 in i_panic ( format=0x8109e2c "file %s: line %d (%s): assertion failed: (%s)") at failures.c:207 No locals. #6 0x08088fa6 in maildir_uidlist_records_array_delete (uidlist=0x951b0b0, rec=0x9534500) at maildir-uidlist.c:403 recs = 0x9536fa0 __PRETTY_FUNCTION__ = "maildir_uidlist_records_array_delete" #7 0x08089fc9 in maildir_uidlist_next (uidlist=0x951b0b0) at maildir-uidlist.c:544 rec = 0x95346b8 uid = 3531 #8 maildir_uidlist_update_read (uidlist=0x951b0b0) at maildir-uidlist.c:741 storage = 0x950f4b8 orig_uid_validity = 1186140978 fd = 14 orig_next_uid = 3531 input = 0x95347a0 st = {st_dev = 65024, __pad1 = 0, __st_ino = 5228663, st_mode = 33152, st_nlink = 1, st_uid = 50357, st_gid = 100, st_rdev = 0, __pad2 = 0, st_size = 763, st_blksize = 4096, st_blocks = 8, st_atim = { tv_sec = 1262546767, tv_nsec = 269770575}, st_mtim = { tv_sec = 1262546802, tv_nsec = 221806856}, st_ctim = { tv_sec = 1262546802, tv_nsec = 221806856}, st_ino = 5228663} last_read_offset = 693 #9 maildir_uidlist_refresh (uidlist=0x951b0b0) at maildir-uidlist.c:889 i = 0 retry = <value optimized out> ret = <value optimized out> #10 0x08086704 in have_recent_messages (ctx=0x9505210, forced=false, find_uid=0x0, lost_files_r=0xbfeaaffb) at maildir-sync.c:659 hdr = <value optimized out> #11 maildir_sync_get_changes (ctx=0x9505210, forced=false, find_uid=0x0, lost_files_r=0xbfeaaffb) at maildir-sync.c:679 flags = <value optimized out> #12 maildir_sync_context (ctx=0x9505210, forced=false, find_uid=0x0, lost_files_r=0xbfeaaffb) at maildir-sync.c:714 sync_flags = <value optimized out> flags = 135325664 new_changed = <value optimized out> cur_changed = <value optimized out> lock_failure = <value optimized out> fname = 0x9515030 "/home/n/i/nixxxxx/Maildir" ret = <value optimized out> __PRETTY_FUNCTION__ = "maildir_sync_context" #13 0x08086be5 in maildir_storage_sync_init (box=0x9514e98, flags=0) at maildir-sync.c:924 _data_stack_cur_id = 4 ctx = 0x9505210 lost_files = <value optimized out> ret = 0 __PRETTY_FUNCTION__ = "maildir_storage_sync_init" #14 0x08070434 in imap_sync_init (client=0x950fba0, box=0x9514e98, imap_flags=0, flags=0) at imap-sync.c:146 ctx = 0x95191a0 __PRETTY_FUNCTION__ = "imap_sync_init" #15 0x08062aa2 in idle_sync_now (box=<value optimized out>, ctx=0x950feb8) at cmd-idle.c:127 __PRETTY_FUNCTION__ = "idle_sync_now" #16 0x080a619c in notify_delay_callback (ibox=0x9514e98) at index-mailbox-check.c:49 No locals. #17 0x080f9959 in io_loop_handle_timeouts_real (ioloop=0x950d9b0) at ioloop.c:313 item = 0x9563c78 tv = {tv_sec = 0, tv_usec = 0} tv_call = {tv_sec = 1262546802, tv_usec = 336801} t_id = 3 #18 io_loop_handle_timeouts (ioloop=0x950d9b0) at ioloop.c:324 _data_stack_cur_id = 2 #19 0x080fa222 in io_loop_handler_run (ioloop=0x950d9b0) at ioloop-epoll.c:180 ctx = 0x950dab8 event = <value optimized out> list = <value optimized out> io = <value optimized out> tv = {tv_sec = 0, tv_usec = 108829} t_id = <value optimized out> msecs = 109 ret = 0 i = <value optimized out> j = <value optimized out> call = <value optimized out> #20 0x080f96f0 in io_loop_run (ioloop=0x950d9b0) at ioloop.c:335 No locals. #21 0x08070f52 in main (argc=) at main.c:327 No locals. $1 = {prev = 0x0, next = 0x0, client = 0x950fba0, pool = 0x950fe18, tag = 0x950fea8 "104.6", name = 0x950feb0 "IDLE", args = 0x0, cmd_flags = 10, func = 0x80628b0 <cmd_idle_continue>, context = 0x950feb8, module_contexts = {arr = {buffer = 0x950fe70, element_size = 4}, v = 0x950fe70, v_modifiable = 0x950fe70}, parser = 0x9512620, state = CLIENT_COMMAND_STATE_WAIT_INPUT, sync = 0x0, uid = 0, cancel = 0, param_error = 0, search_save_result = 0, temp_executed = 0} (gdb) quit ----- End forwarded message ----- -- Ralf Hildebrandt Geschäftsbereich IT | Abteilung Netzwerk Charité - Universitätsmedizin Berlin Campus Benjamin Franklin Hindenburgdamm 30 | D-12203 Berlin Tel. +49 30 450 570 155 | Fax: +49 30 450 570 962 ralf.hildebrandt(a)charite.de | http://www.charite.de

8 22

[Dovecot] nologin in auth proto version 1.1
by Kirill Miazine 21 Jan '10

21 Jan '10

I notice that the nologin parameter for the AUTH command is gone in version 1.1 of Dovecot Authentication Protocol. nologin was added in 1.1, so that authentication client could indicate that there will be no subsequent master requests to retrieve user info. Could we have nologin back please? Kirill

2 5

[Dovecot] Dovecot & SNMP
by Christoph Petersen 21 Jan '10

21 Jan '10

Hi folks, Today I setup Cacti for my environment and I was wondering if there are some templates/scripts for Cacti or SNMP I could use to gather some statistics from Dovecot. Thanks in advance. BR Chris

1 0

[Dovecot] Fastest restart of dovecot after upgrade: HOW?:
by Ralf Hildebrandt 21 Jan '10

21 Jan '10

I'm running dovecot under runit: #!/bin/sh echo '/var/core/%p' > /proc/sys/kernel/core_pattern ulimit -n 8096 ulimit -c unlimited exec /usr/local/sbin/dovecot -F (that way, together with incron, I can automatically generate the coredumps I'm posting all the time) If I apply a patch and recompile, what is the fastest way of restarting dovecot? Which part of the process structure can be killed and takes all it's children with it? ├─runsvdir─┬─runsv───ntpd │ ├─runsv─┬─dovecot─┬─2*[dovecot-auth] │ │ │ ├─1203*[imap] │ │ │ ├─64*[imap-login] │ │ │ ├─64*[managesieve-log] │ │ │ └─64*[pop3-login] │ │ └─svlogd killall dovecot? Is that guaranteed to wipe out ALL child processes as well? I had to use (at least in the past): sv d /var/service/dovecot killall dovecot killall -9 imap-login ps auxwww|grep dovecot to make sure everything would be dead... -- Ralf Hildebrandt Geschäftsbereich IT | Abteilung Netzwerk Charité - Universitätsmedizin Berlin Campus Benjamin Franklin Hindenburgdamm 30 | D-12203 Berlin Tel. +49 30 450 570 155 | Fax: +49 30 450 570 962 ralf.hildebrandt(a)charite.de | http://www.charite.de

2 2

[Dovecot] Maildir and IMAP keywords
by Per-Erik Persson 21 Jan '10

21 Jan '10

When a user in thunderbird toggles some flags like junk, spam or something similar dovecot appends these flags form a-z to the end of the file in maildir. I have another application that also access the maildirs which gets really upset with these flags and ignore those emails. Are there any other way for dovecot to store these flags to make it compatible with other softwares?

2 1

[Dovecot] ldap and mail_location
by spamvoll＠googlemail.com 21 Jan '10

21 Jan '10

hi.. im running dovecot 1.2.9 and checking against an openldap. i defined in dovecot.conf mail_location = maildir:/mail/%u and now all mails are stored under /mail/my.emal(a)mydomain.com how can i store them in /mail/ldapuid ? these userdb and passdb settings drive me crazy.. looks like ldap is a bigger thing then i thougt :) thx

1 2

[Dovecot] Migration from Courier to dovecot
by Werner Detter 21 Jan '10

21 Jan '10

hi list, I've just registered to the list, so please be tolerant ;) I'm currently in the process of planning the migration from courier to dovecot as POP/IMAP-Server. I'm migration from Courier 0.58 (Debian-Etch-packages) to Dovecot 1.1.13 (Debian Lenny Backport). The conversion of the Mailbox from Courier to Dovecot will be done with "courier-dovecot-migrate.pl"-script[1], which works fine. However after running "courier-dovecot-migrate.pl" the Courier-Files still remain in the Maildir. Can i just delete those Courier-specific-files or does dovecot need them somehow (do you normally get rid of these after conversion)? It's about these files: courierimapacl courierimapsubscribed courierimapuiddb courierpop3dsizelist And those directories: courierimaphieracl courierimaphieracl Can i simply delete those with "find" ? Furthermore: is it possible to convert back from Dovecot-Format to Courier-Format? Thanks in advance, Werner [1] http://www.dovecot.org/tools/courier-dovecot-migrate.pl

4 5

[Dovecot] MUA notifications on new mail in a new folder?
by Kārlis Repsons 20 Jan '10

20 Jan '10

If deliver gets run with a non-root userid like this: < | deliver -m path/to/NEWmaildir >, I wonder, is a connected IMAP MUA automatically notified, that the new message has arrived in the new folder? As I see from some experiments with Thunderbird, it has no problems with immediate notifications of new mail in previously existing folders, however, it has problems with the case of new folder.

2 4

[Dovecot] outlook 2007 can't see public folders more than 1 deep
by Frank Cusack 20 Jan '10

20 Jan '10

dovecot-1.2.9 I have a public folder using ACLs to determine who can access it. namespace public { separator = / prefix = shared/ location = maildir:/var/maildir/shared subscriptions = no } Outlook 2007 can't see any folders except at the top level. It can create them just fine, but can't see them after quit and restart. For example, I can create the folder shared/foo/bar but on restart outlook only sees foo as a folder without subfolders (no + to expand it) and doesn't see bar anymore. In fact I can delete the folder foo in outlook and then BOTH .foo and .foo.bar directories are removed on the server. When you click on foo, the error message in the mail pane is "Cannot display the folder. The folder 'foo' cannot contain items. This is most likely a limitation of your IMAP server. In order to create a folder that can contain items, be sure not to append '/' to its name as you create it." -frank

2 2

[Dovecot] md5_verify(...): Not a valid MD5-CRYPT or PLAIN-MD5 password
by BaQs 20 Jan '10

20 Jan '10

'afternoon list! I use mysql as userdb, which contains two type of password schemes: DES and MD5-CRYPT. I read there : http://wiki.dovecot.org/Authentication/PasswordSchemes that both are supported by dovecot. Unfortunately, dovecot keeps saying: Not a valid MD5-CRYPT or PLAIN-MD5 password when looking for a user with DES encrypted password. Is dovecot able to recognize password scheme, or do I have to do something else ? I can't add {DES} to DES passwords, as this database is used with many other softwares. Thanks a lot for your help Pierre

3 2

[Dovecot] Two different issues with dovecot 1.1.13
by Stuart Rowan 20 Jan '10

20 Jan '10

Hi Timo, I'm using Debian backports.org dovecot-imapd, 1:1.1.13-2~bpo50+1. I've got two different issues, a reoccurring, seemingly harmless one about "Corrupted index cache file" (boring.txt) and one that went bonkers over the least few days (bt.txt) causing much spamming of the logs. I've made bt.txt stop happening by just rm'ing dovecot.index* : find Maildir/ -type f -name 'dovecot.index*' -print0 | xargs -0r rm ... which I realise may not be the most helpful thing to have done from your point of view. Anyway I just wanted to let you know about both of these. If one or both are already known about or already fixed by a later version of Dovecot, great and sorry for the noise! If not, and you want any more information etc., let me know. Many thanks, Stu. dovecot: 2009-07-28 10:23:16 Error: IMAP(strr): Corrupted index cache file /home/local/strr/Maildir/dovecot.index.cache: record continues outside its allocated size dovecot: 2009-07-28 10:23:56 Error: IMAP(strr): Corrupted index cache file /home/local/strr/Maildir/dovecot.index.cache: record continues outside its allocated size dovecot: 2009-07-28 08:05:54 Panic: IMAP(strr): file index-mail-headers.c: line 77 (index_mail_parse_header_finish): assertion failed: ((match[match_idx] & HEADER_MAT CH_FLAG_FOUND) == 0) dovecot: 2009-07-28 08:05:54 Error: IMAP(strr): Raw backtrace: imap [0x48dbf2] -> imap [0x48dc73] -> imap [0x48d346] -> imap(index_mail_parse_header+0x617) [0x4545f7] -> imap [0x483284] -> imap [0x483478] -> imap(i_stream_read+0x2c) [0x491d7c] -> imap(i_stream_read_data+0x46) [0x491f16] -> imap(message_get_body_size+0x108) [0x4885 a8] -> imap [0x4226c3] -> imap(imap_fetch+0x162) [0x420852] -> imap(cmd_fetch+0x23c) [0x41a27c] -> imap [0x41e46c] -> imap [0x41e51d] -> imap [0x41eb25] -> imap(clien t_input+0x63) [0x41efd3] -> imap(io_loop_handler_run+0xcb) [0x49515b] -> imap(io_loop_run+0x18) [0x4945c8] -> imap(main+0x3da) [0x426bea] -> /lib/libc.so.6(__libc_sta rt_main+0xe6) [0x7f0e851941a6] -> imap [0x418859] dovecot: 2009-07-28 08:05:54 Error: child 20007 (imap) killed with signal 6 (core dumps disabled) dovecot: 2009-07-28 08:05:56 Panic: IMAP(strr): file index-mail-headers.c: line 77 (index_mail_parse_header_finish): assertion failed: ((match[match_idx] & HEADER_MAT CH_FLAG_FOUND) == 0) dovecot: 2009-07-28 08:05:56 Error: IMAP(strr): Raw backtrace: imap [0x48dbf2] -> imap [0x48dc73] -> imap [0x48d346] -> imap(index_mail_parse_header+0x617) [0x4545f7] -> imap [0x483284] -> imap [0x483478] -> imap(i_stream_read+0x2c) [0x491d7c] -> imap(i_stream_read_data+0x46) [0x491f16] -> imap(message_get_body_size+0x108) [0x4885 a8] -> imap [0x4226c3] -> imap(imap_fetch+0x162) [0x420852] -> imap(cmd_fetch+0x23c) [0x41a27c] -> imap [0x41e46c] -> imap [0x41e51d] -> imap [0x41eb25] -> imap(clien t_input+0x63) [0x41efd3] -> imap(io_loop_handler_run+0xcb) [0x49515b] -> imap(io_loop_run+0x18) [0x4945c8] -> imap(main+0x3da) [0x426bea] -> /lib/libc.so.6(__libc_sta rt_main+0xe6) [0x7f2edf08b1a6] -> imap [0x418859] dovecot: 2009-07-28 08:05:56 Error: child 20984 (imap) killed with signal 6 (core dumps disabled)

2 5

[Dovecot] Autobuilder packages for Debian stable/i386 now available
by Stephan Bosch 20 Jan '10

20 Jan '10

Hi, A few days back I started the first automated slave builder that produces bleeding edge Debian stable packages for Dovecot v1.2 and v2.0. It uses the source packages already provided by the automated master repository (which builds binary packages for Debian testing), so that the version numbers and content are equal throughout all Debian releases. The repository is available as follows: deb http://xi.rename-it.nl/debian/ stable-auto/dovecot-1.2 main Or, for Dovecot v2.0: deb http://xi.rename-it.nl/debian/ stable-auto/dovecot-2.0 main Read this for more information: http://wiki.dovecot.org/PrebuiltBinaries#Automatically_Built_Packages I hope to add amd64 binary support soon. Regards, Stephan.

1 0

Re: [Dovecot] Oracle SQL driver
by Alexander Bukharov 20 Jan '10

20 Jan '10

> The transaction handling doesn't look correct to me. The sql_update()s > just add the change to a linked list and commit() is then supposed to > run them in one transaction and either everything should succeed or > fail. Your commit appears to ignore errors and just commit everything > that goes through? Also since nothing is actually sent before commit(), > your rollback() shouldn't need to send ROLLBACK. You right. I've corrected the transaction handling mechanism. The only thing I couldn't understand: why rollback() shouldn't need to make real ROLLBACK? In case when whole transaction was failed succeded statements will remain uncommited. Then they will be commited later on next successful transaction. May be ROLLBACK is still needed? > The "VARCHAR sqltext[2048]" seems like an unnecessary restriction on the > query length. Wasn't there a way to do this without the limit? Or in AFAIK there is no possibility to use C types in PREPARE statement. Also Oracle cannot handle unsized VARCHARs. I've increased VARCHAR size to 65535. > test_connection() seems unnecessary. Right you are. > Couldn't driver_oracle_generate_name() be simply: > static unsigned int counter = 0; > return i_strdup_printf("ORACONN_%x", ++counter); =) Right. > driver_oracle_escape_string() really should be escaping the string. I made this function to replace single quote in string with two single quotes. IMHO this should be enough. How do you think? > Kind of annoying that each query needs a cursor, even though nearly all > queries are expected to return only a single row, but I guess that can't > be helped with the current API.. Yes. There are no other ways to work with untyped statements in OCI. But Oracle claims that all these statements shouldn't produce significant performance impact. The new version attached.

2 3

[Dovecot] ManageSieve doe not work
by Mike Werner 20 Jan '10

20 Jan '10

Hi, I use MailScanner 4.74.16 (Ubuntu karmic). I convigured ManageSieve as discribed in http://wiki.dovecot.org/ManageSieve/Configuration. But sieve scripts are not applied to incoming mail. How can I determin what went wrong? -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

2 1

[Dovecot] Dovecot 2.0 beta imap session crash report
by wenjie zheng 20 Jan '10

20 Jan '10

System config: RHEL 5.3, 64 bit Dovecot 2.0 beta (changeset "2882650531e0", 10 days old) installed with lda and lmtp Symptom: IMAP session crashed when I tried to delete a non-exist mailbox, e.g., Trash in my test [root@mail4a LocalIntegrationTest]# telnet localhost 143 * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE AUTH=PLAIN] Dovecot ready. a login testmail4a2(a)dev.p4nt5.com xxxxxx a OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT IDLE CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH QUOTA] Logged in a delete Trash Connection closed by foreign host. Error log: Jan 12 12:33:26 mail4a dovecot: imap(testmail4a2(a)dev.p4nt5.com): maildir++: root=/data/mail/de/dev.p4nt5.com/te/testmail4a2, index=, control=, inbox= Jan 12 12:33:31 mail4a dovecot: imap(testmail4a2(a)dev.p4nt5.com): open() failed with index file (null): Bad address Jan 12 12:33:31 mail4a dovecot: master: service(imap): child 20867 killed with signal 11 (core dumps disabled) How to reproduce: Delete a non-exist mailbox after login Thanks, Wenjie

2 3

Re: [Dovecot] ManageSieve doe not work
by Nick Rosier 20 Jan '10

20 Jan '10

Mike Werner wrote: > Hi, > > I use MailScanner 4.74.16 (Ubuntu karmic). I convigured ManageSieve as > discribed in http://wiki.dovecot.org/ManageSieve/Configuration. But sieve > scripts are not applied to incoming mail. How can I determin what went > wrong? ManageSieve is to manage sieve filters. Your MDA does the filtering. Have you configured Dovecot deliver as your MDA? See: http://wiki.dovecot.org/LDA N.

1 0

Re: [Dovecot] How can I configure dovecot as gmail imap proxy
by Supratik Goswami 20 Jan '10

20 Jan '10

Here the proxy server should authenticate the user. If the user is in the list of authenticated users then dovecot will allow to connect to imap.gmail.com. Consider a scenario where a client tries to read his mailbox from imap.gmail.com:993. Client executes the command "mutt -f imaps://imap.gmail.com", the request is first authenticated at the proxy server. If the request is coming from a valid user, dovecot will allow to connect to imap.gmail.com and fetch mails for that user. Can you please help me with the steps to configure the server. Warm Regards Supratik

2 1

[Dovecot] LDA and POP3/IMAP user_query
by Michael 20 Jan '10

20 Jan '10

How do I get IMAP+POP3 vs. LDA to use different user_query statements? The problem is that the input fields are different. IMAP/POP3 is an email address LDA is a username I have written a long statement to try and cater for both however it still only works 99% of the time, and the remaining 1% fails. The 1% that fails sees the mail being delivered to the wrong mbox. In this particular case the same client owned both mboxes so it was ok, but if this had not been the case things could have gotten real embarrassing. Think of the following: abcwidgets(a)theirdomain.tld mailuser1 mailuser1(a)adomain.tld mailuser2 Now when using the Postfix LDA, email for each address is properly delivered to the specified mbox, however in this case because their is a matching name for the mbox and the email address lefthand content, the compound SQL query returns both results and the LDA will use the first one, which in this case was the wrong one. This is the query used: user_query = \ SELECT mailboxes.username AS user, mailboxes.uid, mailboxes.gid, \ concat('*:storage=',mailquota,'M') AS quota_rule \ FROM mailboxes JOIN accounts ON accounts.username = mailboxes.username \ WHERE ((mailboxes.username = '%n' AND accounts.active='1') || \ (mailboxes.email = '%u' AND mailboxes.active='1' AND accounts.active='1') || \ (mailboxes.email = CONCAT('@','%d') AND mailboxes.active='1' \ AND (SELECT COUNT(email) FROM mailboxes WHERE email='%u') = '0')) which additionally caters for the few catch alls our users have. I think this is a massive oversight in the design of Dovecot to use one query to for 2 separate and distinct processes, that both use different parameters. From what I can tell it seems to assume that a mail system will always use username@domain addresses, and never anything more arbitrary. Has anyone found a way around this? Michael

3 4

[Dovecot] shared namespaces with common prefix prefix
by Frank Cusack 19 Jan '10

19 Jan '10

Can shared/public namespaces' prefixes have a common prefix? :) namespace public { separator = / prefix = zz/shared/ location = maildir:/var/maildir/shared:INDEX=/var/maildir/%n/shared subscriptions = no } # to share other employees mailboxes (term'd or admin access) namespace shared { separator = / prefix = zz/shared/%%u/ location = maildir:/var/maildir/%%n:INDEX=/var/maildir/users/%%u subscriptions = no list = children } Since I added the shared namespace, I can no longer access the public namespace. The folders show up but then trying to access one gets the error that the mailbox doesn't exist. If they can't have a common part of the prefix, is that an IMAP limitation or could dovecot conceivably handle it? -frank

2 4

[Dovecot] Auto Discard Vacation Sieve in a date
by Andrés Yacopino 19 Jan '10

19 Jan '10

I have deploy an environment with pigeon sieve, managesieve, dovecot, squirrelmail and avelsieve plugin. The vacation messages are working fine. I am looking for a method to discard vacation messages in some date, when the user returns. ¿Has somebody looked in this feature? Thanks a lot, -- Andrés Fernando Yacopino Infraestructura - Dpto Sistemas AcaSalud Cooperativa de Prestaciones Médico Asistenciales Limitada Tel: 0341-4208726 ayacopino(a)acasalud.com.ar

2 1

[Dovecot] Auto discard sieve vacation messages
by Andrés Yacopino 19 Jan '10

19 Jan '10

I have deploy an environment with pigeon sieve, managesieve, dovecot, squirrelmail and avelsieve plugin. The vacation messages are working fine. I am looking for a method to discard vacation messages in some date, when the user returns. Has somebody looked in this feature? Thanks a lot, -- Andrés Fernando Yacopino Infraestructura - Dpto Sistemas AcaSalud Cooperativa de Prestaciones Médico Asistenciales Limitada Tel: 0341-4208726 ayacopino(a)acasalud.com.ar

2 1

[Dovecot] Virtual folder, Program terminated with signal 6
by Matthias Rieber 19 Jan '10

19 Jan '10

Hi, I've regularly crashes with a certain virtual folder. Erasing the dovecot-index.* files help just for few hours/days. Here are to backtraces: Core was generated by `imap'. Program terminated with signal 6, Aborted. [New process 25893] #0 0xf7df8556 in raise () from /lib/libc.so.6 #0 0xf7df8556 in raise () from /lib/libc.so.6 No symbol table info available. #1 0xf7df9d78 in abort () from /lib/libc.so.6 No symbol table info available. #2 0x080f2d25 in default_fatal_finish (type=<value optimized out>, status=0) at failures.c:160 backtrace = 0x88ee860 "imap [0x80f2d11] -> imap [0x80f2d92] -> imap [0x80f26e9] -> imap(index_search_result_update_flags+0x295) [0x80b2305] -> /usr/local/lib/dovecot/imap/lib20_virtual_plugin.so [0xf7da937d] -> /usr/local/l"... #3 0x080f2d92 in i_internal_fatal_handler (type=LOG_TYPE_PANIC, status=0, fmt=0x810b88c "file %s: line %d (%s): assertion failed: (%s)", args=0xff8b2ea4 "\\S\021\bW") at failures.c:443 No locals. #4 0x080f26e9 in i_panic (format=0x810b88c "file %s: line %d (%s): assertion failed: (%s)") at failures.c:207 No locals. #5 0x080b2305 in index_search_result_update_flags (result=0x9400cb0, uids=0xff8b3150) at index-search-result.c:87 search_arg = {next = 0x89024c0, type = SEARCH_UIDSET, value = {subargs = 0x0, seqset = {arr = {buffer = 0x88ee4a8, element_size = 8}, v = 0x88ee4a8, v_modifiable = 0x88ee4a8}, str = 0x0, time = 0, size = 0, flags = 0, search_flags = 0, thread_type = MAIL_THREAD_NONE, keywords = 0x0, modseq = 0x0, search_args = 0x0, search_result = 0x0}, context = 0x0, hdr_field_name = 0x0, not = 0, match_always = 0, result = -1} ret = <value optimized out> __PRETTY_FUNCTION__ = "index_search_result_update_flags" #6 0xf7da937d in virtual_sync_backend_boxes (ctx=0x93f6660) at virtual-sync.c:733 _data_stack_cur_id = 4 i = 0 ret = 155151376 #7 0xf7daa25b in virtual_storage_sync_init (box=0xb20e070, flags=65) at virtual-sync.c:1486 sync_ctx = <value optimized out> ret = <value optimized out> #8 0x080b6ab2 in mailbox_sync (box=0x6525, flags=65, status_items=239, status_r=0xff8b3338) at mail-storage.c:593 ctx = <value optimized out> #9 0x080651b8 in cmd_select_full (cmd=0x88fbc88, readonly=false) at cmd-select.c:273 client = (struct client *) 0x88fb9f8 box = (struct mailbox *) 0x0 ctx = (struct imap_select_context *) 0x88fbd28 args = (const struct imap_arg *) 0x88fe508 mailbox = 0x88ee2b8 "obfuscated" ret = <value optimized out> __PRETTY_FUNCTION__ = "cmd_select_full" #10 0x08065919 in cmd_select (cmd=0x88fbc88) at cmd-select.c:389 No locals. #11 0x08067bfc in client_command_input (cmd=0x88fbc88) at client.c:612 client = (struct client *) 0x88fb9f8 command = <value optimized out> __PRETTY_FUNCTION__ = "client_command_input" #12 0x08067c99 in client_command_input (cmd=0x88fbc88) at client.c:661 client = (struct client *) 0x88fb9f8 command = <value optimized out> __PRETTY_FUNCTION__ = "client_command_input" #13 0x08067e0d in client_handle_input (client=0x88fb9f8) at client.c:702 _data_stack_cur_id = 3 ret = false remove_io = <value optimized out> handled_commands = false __PRETTY_FUNCTION__ = "client_handle_input" #14 0x0806876f in client_input (client=0x88fb9f8) at client.c:753 cmd = <value optimized out> output = (struct ostream *) 0x88fbbac bytes = <value optimized out> __PRETTY_FUNCTION__ = "client_input" #15 0x080fbac0 in io_loop_handler_run (ioloop=0x88f61a8) at ioloop-epoll.c:208 ctx = (struct ioloop_handler_context *) 0x88f6c18 event = (const struct epoll_event *) 0x88f6c58 list = (struct io_list *) 0x88fbc30 io = (struct io_file *) 0x88fbc08 tv = {tv_sec = 1, tv_usec = 707102} t_id = 2 msecs = <value optimized out> ret = 1 i = 0 j = 0 call = <value optimized out> #16 0x080faf30 in io_loop_run (ioloop=0x88f61a8) at ioloop.c:335 No locals. #17 0x0807127a in main (argc=) at main.c:327 No locals. Core was generated by `imap'. Program terminated with signal 6, Aborted. [New process 26275] #0 0xf7ea4556 in raise () from /lib/libc.so.6 #0 0xf7ea4556 in raise () from /lib/libc.so.6 No symbol table info available. #1 0xf7ea5d78 in abort () from /lib/libc.so.6 No symbol table info available. #2 0x080f2d25 in default_fatal_finish (type=<value optimized out>, status=0) at failures.c:160 backtrace = 0x88d9860 "imap [0x80f2d11] -> imap [0x80f2d92] -> imap [0x80f26e9] -> imap(index_search_result_update_flags+0x295) [0x80b2305] -> /usr/local/lib/dovecot/imap/lib20_virtual_plugin.so [0xf7e5537d] -> /usr/local/l"... #3 0x080f2d92 in i_internal_fatal_handler (type=LOG_TYPE_PANIC, status=0, fmt=0x810b88c "file %s: line %d (%s): assertion failed: (%s)", args=0xffe03774 "\\S\021\bW") at failures.c:443 No locals. #4 0x080f26e9 in i_panic (format=0x810b88c "file %s: line %d (%s): assertion failed: (%s)") at failures.c:207 No locals. #5 0x080b2305 in index_search_result_update_flags (result=0x9318e10, uids=0xffe03a20) at index-search-result.c:87 search_arg = {next = 0x893dfe8, type = SEARCH_UIDSET, value = {subargs = 0x0, seqset = {arr = {buffer = 0x88d94a8, element_size = 8}, v = 0x88d94a8, v_modifiable = 0x88d94a8}, str = 0x0, time = 0, size = 0, flags = 0, search_flags = 0, thread_type = MAIL_THREAD_NONE, keywords = 0x0, modseq = 0x0, search_args = 0x0, search_result = 0x0}, context = 0x0, hdr_field_name = 0x0, not = 0, match_always = 0, result = -1} ret = <value optimized out> __PRETTY_FUNCTION__ = "index_search_result_update_flags" #6 0xf7e5537d in virtual_sync_backend_boxes (ctx=0x930e9e8) at virtual-sync.c:733 _data_stack_cur_id = 4 i = 0 ret = 154202008 #7 0xf7e5625b in virtual_storage_sync_init (box=0x88ebcf0, flags=65) at virtual-sync.c:1486 sync_ctx = <value optimized out> ret = <value optimized out> #8 0x080b6ab2 in mailbox_sync (box=0x66a3, flags=65, status_items=239, status_r=0xffe03c08) at mail-storage.c:593 ctx = <value optimized out> #9 0x080651b8 in cmd_select_full (cmd=0x88e6c88, readonly=false) at cmd-select.c:273 client = (struct client *) 0x88e69f8 box = (struct mailbox *) 0x0 ctx = (struct imap_select_context *) 0x88e6d28 args = (const struct imap_arg *) 0x88e9508 mailbox = 0x88d92b8 "obfuscated" ret = <value optimized out> __PRETTY_FUNCTION__ = "cmd_select_full" #10 0x08065919 in cmd_select (cmd=0x88e6c88) at cmd-select.c:389 No locals. #11 0x08067bfc in client_command_input (cmd=0x88e6c88) at client.c:612 client = (struct client *) 0x88e69f8 command = <value optimized out> __PRETTY_FUNCTION__ = "client_command_input" #12 0x08067c99 in client_command_input (cmd=0x88e6c88) at client.c:661 client = (struct client *) 0x88e69f8 command = <value optimized out> __PRETTY_FUNCTION__ = "client_command_input" #13 0x08067e0d in client_handle_input (client=0x88e69f8) at client.c:702 _data_stack_cur_id = 3 ret = false remove_io = <value optimized out> handled_commands = false __PRETTY_FUNCTION__ = "client_handle_input" #14 0x0806876f in client_input (client=0x88e69f8) at client.c:753 cmd = <value optimized out> output = (struct ostream *) 0x88e6bac bytes = <value optimized out> __PRETTY_FUNCTION__ = "client_input" #15 0x080fbac0 in io_loop_handler_run (ioloop=0x88e11a8) at ioloop-epoll.c:208 ctx = (struct ioloop_handler_context *) 0x88e1c18 event = (const struct epoll_event *) 0x88e1c58 list = (struct io_list *) 0x88e6c30 io = (struct io_file *) 0x88e6c08 tv = {tv_sec = 1, tv_usec = 627183} t_id = 2 msecs = <value optimized out> ret = 1 i = 0 j = 0 call = <value optimized out> #16 0x080faf30 in io_loop_run (ioloop=0x88e11a8) at ioloop.c:335 No locals. #17 0x0807127a in main (argc=) at main.c:327 No locals. kind regards, Matthias

2 4

[Dovecot] Log the virtual email address and not the local account - dovecot 1.2.2 w/ MySQL
by Bill 19 Jan '10

19 Jan '10

I recently started using dovecot and have it working well but I have one item I haven't been able to find an answer for. I am using MySQL with Dovecot for authentication with my virtual email customers. When the user logs in and checks email a log entry is recorded. Instead of the email address (bob(a)bob.net) being logged it records the local account (vemail101) in the POP3 log. How can I get dovecot to reflect the email address that the customer logged in with instead of the local account? Thx, Bill

2 2

[Dovecot] fts squat non-english search for 2 words
by vuser1＠test123.ru 19 Jan '10

19 Jan '10

Hello, It looks I encoutered a bug or misconfiguration. fts_squat search for subject and body works excellent for English mails. For non-English (in particular, Russian) it works only when query consists of 1 word. Phrases - 2 and more words - always returns nothing. Example: search for "planet" ("планета") returns results, search for "Earth" ("Земля") also returns results, but "planet Earth" ("планета Земля") returns nothing. But there are emails having exact phrase "planet Earth". This problem occurs only for non-English queries, both for search in subject and in email body. I tried web-mail Horde 3.2 and Thunderbird. I turned fts plugin off and it correctly finds phrases with 2 and more russian words! So problem is squat. Is it a bug or known config issue? OS: Debian 5.0, installed as openVZ container inside Ubuntu 8.04. Dovecot: 1.2.4, from backports.org Ext3 filesys dovecot -n -------------- # 1.2.4: /etc/dovecot/dovecot.conf # OS: Linux 2.6.24-24-openvz i686 Debian 5.0.3 simfs log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s ssl_cert_file: /etc/ssl/test123/test123.full.crt ssl_key_file: /etc/ssl/test123/priv/test123.key disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login last_valid_uid: 500 mail_privileged_group: mail mail_location: maildir:/var/mail/%u mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugins(default): quota imap_quota fts fts_squat mail_plugins(imap): quota imap_quota fts fts_squat mail_plugins(pop3): mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 imap_client_workarounds(default): outlook-idle delay-newmail imap_client_workarounds(imap): outlook-idle delay-newmail imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh lda: postmaster_address: postmaster(a)test123.ru hostname: test123.ru sendmail_path: /usr/sbin/sendmail auth_socket_path: /var/run/dovecot/auth-master mail_plugins: quota sieve log_path: info_log_path: auth default: mechanisms: plain login user: nobody passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: passwd userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: prefetch socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: mail master: path: /var/run/dovecot/auth-master mode: 432 user: vmail group: mail plugin: acl: vfile:/etc/dovecot/acls trash: /etc/dovecot/trash.conf fts: squat fts_squat: partial=4 full=20 --------------- (with full=10 problem persists)

2 7

[Dovecot] virtual namespace question
by Josephus 19 Jan '10

19 Jan '10

Hi, I'm wondering if it is possible to create a virtual namespace on a prefix other than "virtual/". My goal is to mix IMAP folders with virtual folders on the same folder level (prefix = ""). mail_location = maildir:/data/mail/%d/%u/ # Virtual namespace private { prefix = separator = / location = virtual:/data/mail/%d/%u/virtual } # Default namespace private { separator = / prefix = inbox = yes } With this configuration the folders show up on the same level, but I'm unable to subscribe to them. When I change the prefix back to "virtual/" it works, but folders are still gruoped under "virtual". Funny thing is, when I use a prefix something like "vfolder/", the root folder is no longer greyed out in my MUA (TB3), and I get a "Mailbox doesn't exist: vfolder" error msg if I click on it. BR, Jos

2 1

[Dovecot] Best way of dealing with Case-Sensitive Issues in Dovecot
by Mario Antonio 19 Jan '10

19 Jan '10

In order to deal with case-sensitive issues, I am thinking to use the variable %L (adding it to my current configs --as suggested before by other users in this list) in the configuration files in this way: In Dovecot.conf: mail_location = maildir:/vmail/%Ld/%Ln/Maildir:INDEX=/indexes/%Ld/%Ln auth default: username_format: %Lu passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: static args: uid=5000 gid=5000 home=/vmail/%Ld/%Ln allow_all_users=yes In dovecot-sql.conf: password_query = select concat(virtual_users.user, '@', virtual_domains.name) AS user, virtual_users.password as password \ from virtual_users LEFT JOIN virtual_domains ON virtual_users.domain_id=virtual_domains.id \ where virtual_users.user='%Ln' and virtual_domains.name='%Ld' and virtual_users.status = 1 and virtual_domains.status = 1; user_query = SELECT 5000 AS uid,5000 AS gid,'/vmail/%Ld/%Ln' as home, \ concat('*:storage= ', virtual_users.quota_kb) AS quota_rule \ from virtual_users LEFT JOIN virtual_domains ON virtual_users.domain_id=virtual_domains.id \ where virtual_users.user='%Ln' and virtual_domains.name='%Ld' Is this the correct way of assuring lowercase use all over the place? Can I use the variable %L in where sql statements? Regards, Mario Antonio

2 1

[Dovecot] expire plugin doesn't find mail location
by Roland Rosenfeld 19 Jan '10

19 Jan '10

Hi! After searching for hours now, I give up and have to ask here. I try to use the expire plugin but it always tries to expire my mails instead of the mails of the user. I read about the "Mail location setting problem (v1.1-v1.2) and configured a "mail" extra field in the userdb, but that doesn't have the effect I want. I have not idea, what I could try out more, so I ask here. My setup is the following: # 1.2.9: /usr/local/dovecot/etc/dovecot.conf # OS: SunOS 5.10 sun4v zfs syslog_facility: local6 protocols: imap pop3 managesieve listen(default): * listen(imap): * listen(pop3): * listen(managesieve): *:2000, *:4190 ssl: no disable_plaintext_auth: no login_dir: /usr/local/dovecot/var/run/dovecot/login login_executable(default): /usr/local/dovecot/libexec/dovecot/imap-login login_executable(imap): /usr/local/dovecot/libexec/dovecot/imap-login login_executable(pop3): /usr/local/dovecot/libexec/dovecot/pop3-login login_executable(managesieve): /usr/local/dovecot/libexec/dovecot/managesieve-login mail_uid: 2001 mail_gid: 2001 mail_location: maildir:/var/mailstore/%2Mn/%n/mail mail_debug: yes mail_executable(default): /usr/local/dovecot/libexec/dovecot/imap mail_executable(imap): /usr/local/dovecot/libexec/dovecot/imap mail_executable(pop3): /usr/local/dovecot/libexec/dovecot/pop3 mail_executable(managesieve): /usr/local/dovecot/libexec/dovecot/managesieve mail_plugins(default): quota imap_quota expire mail_plugins(imap): quota imap_quota expire mail_plugins(pop3): quota expire mail_plugins(managesieve): mail_plugin_dir(default): /usr/local/dovecot/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/dovecot/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/dovecot/lib/dovecot/pop3 mail_plugin_dir(managesieve): /usr/local/dovecot/lib/dovecot/managesieve pop3_uidl_format(default): %08Xu%08Xv pop3_uidl_format(imap): %08Xu%08Xv pop3_uidl_format(pop3): %v.%u pop3_uidl_format(managesieve): %08Xu%08Xv namespace: type: private separator: / inbox: yes list: yes subscriptions: yes lda: postmaster_address: postmaster(a)netcologne.de hostname: mailstore20.netcologne.de mail_plugins: sieve quota expire auth_socket_path: /usr/local/dovecot/var/run/dovecot/auth-master auth default: master_user_separator: * verbose: yes debug: yes passdb: driver: passwd-file args: /usr/local/dovecot/etc/passwd.master pass: yes master: yes passdb: driver: sql args: /usr/local/dovecot/etc/dovecot-sql.conf userdb: driver: prefetch userdb: driver: sql args: /usr/local/dovecot/etc/dovecot-sql.conf socket: type: listen master: path: /usr/local/dovecot/var/run/dovecot/auth-master mode: 384 user: vmail plugin: quota: maildir expire: INBOX 60 Spam 60 Papierkorb 60 Trash 1 expire_dict: proxy::expire dict: expire: mysql:/usr/local/dovecot/etc/dovecot-dict-expire.conf With the following dovecot-sql.conf: driver = mysql connect = host=localhost dbname=cyrus user=cyrus password=XXXX default_pass_scheme = CRYPT password_query = \ SELECT username, password, concat('*:storage=', quota) AS userdb_quota_rule, '/var/mailstore/%2Mn/%n' as userdb_home, 'maildir:/var/mailstore/%2Mn/%n/mail' as userdb_mail \ FROM passwd WHERE username='%n' user_query = \ SELECT concat('*:storage=', quota) AS quota_rule, '/var/mailstore/%2Mn/%n' as home, 'maildir:/var/mailstore/%2Mn/%n/mail' as mail \ FROM passwd WHERE username='%n' And this is dovecot-dict-expire.conf: connect = host=localhost dbname=dovecot user=dovecot password=XXXXXX map { pattern = shared/expire/$user/$mailbox table = expires value_field = expire_stamp fields { username = $user mailbox = $mailbox } } In user test's Trash folder there are mails that are older than 1 day and in dovecot.expires there is +----------+---------+--------------+ | username | mailbox | expire_stamp | +----------+---------+--------------+ | test | Trash | 1262779049 | +----------+---------+--------------+ But if I run /usr/local/dovecot/sbin/dovecot --exec-mail ext /usr/local/dovecot/libexec/dovecot/expire-tool.sh --test I get the following output: Info: Loading modules from directory: /usr/local/dovecot/lib/dovecot/imap Info: Module loaded: /usr/local/dovecot/lib/dovecot/imap/lib10_quota_plugin.so Info: Module loaded: /usr/local/dovecot/lib/dovecot/imap/lib20_expire_plugin.so Info: Quota root: name= backend=maildir args= Info: expire: pattern=INBOX type=expunge secs=5184000 Info: expire: pattern=Spam type=expunge secs=5184000 Info: expire: pattern=Papierkorb type=expunge secs=5184000 Info: expire: pattern=Trash type=expunge secs=86400 Info: auth input: quota_rule=*:storage=10000 Info: auth input: home=/var/mailstore/09/test Info: auth input: mail=maildir:/var/mailstore/09/test/mail Info: Namespace: type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes Info: maildir: data=/var/mailstore/df/rrosenfeld/mail Info: maildir++: root=/var/mailstore/df/rrosenfeld/mail, index=, control=, inbox=/var/mailstore/df/rrosenfeld/mail Info: test/Trash: no messages left Info: test/Spam: stop, expire time in future: Sat Mar 6 12:35:10 2010 As you can see, it uses my username (rrosenfeld) instead of the username "test", whose mailbox should be expired. But while the above it printed to the console I get the following in the logfile: Jan 12 15:33:54 mailstore20 dovecot: [ID 583609 local6.info] dict: mysql: Connected to localhost (dovecot) Jan 12 15:33:54 mailstore20 dovecot: [ID 583609 local6.info] auth(default): master in: USER 1 test service=internal Jan 12 15:33:54 mailstore20 dovecot: [ID 583609 local6.info] auth(default): prefetch(test): passdb didn't return userdb entries, trying the next userdb Jan 12 15:33:54 mailstore20 dovecot: [ID 583609 local6.info] auth-worker(default): sql(test): SELECT concat('*:storage=', quota) AS quota_rule, '/var/mailstore/09/test' as home, 'maildir:/var/mailstore/09/test/mail' as mail FROM passwd WHERE username='test' Jan 12 15:33:54 mailstore20 dovecot: [ID 583609 local6.info] auth-worker(default): mysql: Connected to localhost (cyrus) Jan 12 15:33:54 mailstore20 dovecot: [ID 583609 local6.info] auth(default): master out: USER 1 test quota_rule=*:storage=10000 home=/var/mailstore/09/test mail=maildir:/var/mailstore/09/test/mail As you can see, the auth engine sees the request for the user "test". It also returns the correct home and mail attributes (the above messages were triggered by my expire call!). I tried out to comment out the mail_location from dovecot.conf to make sure that the mail attribute from userdb is used, but this has the effect, that dovecot expire does not know any mail location setting at all and tries some "home" directories and different mail storage formats while my setting mail=maildir:/var/mailstore/09/test/mail from the userdb is completely ignored: Info: Loading modules from directory: /usr/local/dovecot/lib/dovecot/imap Info: Module loaded: /usr/local/dovecot/lib/dovecot/imap/lib10_quota_plugin.so Info: Module loaded: /usr/local/dovecot/lib/dovecot/imap/lib20_expire_plugin.so Info: Quota root: name= backend=maildir args= Info: expire: pattern=INBOX type=expunge secs=5184000 Info: expire: pattern=Spam type=expunge secs=5184000 Info: expire: pattern=Papierkorb type=expunge secs=5184000 Info: expire: pattern=Trash type=expunge secs=86400 Info: auth input: quota_rule=*:storage=10000 Info: auth input: home=/var/mailstore/09/test Info: auth input: mail=maildir:/var/mailstore/09/test/mail Info: Namespace: type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes Info: cydir: mailbox location not given Info: cydir: Couldn't create mail storage : Root mail directory not given Info: dbox: mailbox location not given Info: dbox: Couldn't create mail storage : Root mail directory not given Info: maildir: access(/var/mailstore/09/test/Maildir, rwx): failed: No such file or directory Info: maildir: couldn't find root dir Info: maildir: Couldn't create mail storage : Root mail directory not given Info: mbox: root exists (/var/mailstore/09/test/mail) Info: mbox: INBOX: access(/var/mail/test, rw) failed: No such file or directory Info: mbox: INBOX: access(/var/spool/mail/test, rw) failed: No such file or directory Info: mbox: INBOX defaulted to /var/mailstore/09/test/mail/inbox Info: fs: root=/var/mailstore/09/test/mail, index=, control=, inbox=/var/mailstore/09/test/mail/inbox Info: test/Trash: no messages left Info: test/Spam: stop, expire time in future: Sat Mar 6 12:35:10 2010 As you can see, expire tries to access different (default?) mailbox typies instead of simply using maildir:/var/mailstore/09/test/mail as defined in the userdb. So my main problem seems to be, that the mail attribute from the userdb is completely ignored in expire calls. But how do I fix this? Tschoeeee Roland -- Roland Rosenfeld - Content Delivery - NED - Technik NetCologne Gesellschaft für Telekommunikation mbH - HRB 25580, AG Köln Am Coloneum 9 50829 Köln Tel.: +49-221-2222-373 Fax: +49-221-2222-7373 Geschäftsführer: Werner Hanf, Karl-Heinz Zankel

2 2

[Dovecot] Dovecot-deliver sometimes fails when message set to discard via sieve
by Steve Wagner 19 Jan '10

19 Jan '10

Hi, sometimes mails that i discard via sieve gets delivered to my inbox and i can not figure out why. So i hope you can give me a hint. My setup is: I use a self compiled dovecot 1.2.4 with installed sieve and managesieve plugin. Incoming mails a processed by Postfix and the delivered to Procmail. Procmail invokes Spamassassin and discard all mails marked as spam. The other mails are passed to Dovecot deliver this way: :0 w | /opt/dovecot/libexec/dovecot/deliver For moving mails to subdirectorys this works always, but not for mails that are discard via Sieve. Examples are: if header :contains "List-Id" "git.vger.kernel.org" { if header :contains "Subject" "[ANNOUNCE]" { fileinto "Announce"; stop; } if header :contains "Subject" "[ANN]" { fileinto "Announce"; stop; } if header :contains "Subject" "[PATCH" { discard; stop; } fileinto "Lists.Git"; stop; } or if header :contains "Organization" "web.de" { discard; stop; } This often works, but sometimes it fails. Procmail reports then that deliver reported an error (but not which) and delivers them to my inbox. There are also no message in dovecots or dovecot delivers log file. Dose anybody have an idea? Steve

3 12

[Dovecot] How can I configure dovecot as gmail imap proxy
by Supratik Goswami 19 Jan '10

19 Jan '10

Hi, I want to configure dovecot as gmail imap proxy. If any system in my network wants to connect to imap.gmail.com,993 it has to go through the dovecot proxy. Is it possible to setup such environment with dovecot? If yes, can you please help me to configure my dovecot server. Warm Regards Supratik

3 2

[Dovecot] Update Dovecot index files on maildrop delivery?
by Kārlis Repsons 19 Jan '10

19 Jan '10

Hi all, is there some easy way to inform Dovecot about a new delivery, which has happened after postfix invoked maildrop, so the index files would be updated?

3 5

[Dovecot] Socket permission 432/384 and dovecot.conf
by Seba 19 Jan '10

19 Jan '10

Sorry for that question but: when you set in dovecot.conf this for example: socket listen { client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } } and you run "dovecot -n" you'll see client: path: /var/spool/postfix/private/auth mode: 432 I'm wondering about the mode "432" - how is this value calculated? Same for the auth/master socket socket - the value ist "384" and in dovecot.conf it's 0600. Thanks for any info. Seba

3 2

[Dovecot] Dovecot Proxy and environment variables
by BaQs 19 Jan '10

19 Jan '10

Dear list, First of all, I am French so excuse my bad english. I am currently using dovecot proxy feature, using sql backend. I "proxy" the imap/pop requests to another server, let's say server2. On server2, I use a script to keep up to date a "pop before smtp auth" database. I used mail_executable = /path/to/this/script.sh ... My problem is: the $IP environment variable on server2 is the proxy's IP. How could I give a variable from proxy to server2, or simply get the real client public IP ? Thanks a lot in advance for your answers Pierre. PS: let me also thank very much dovecot developers and community !

3 7

[Dovecot] No filelocking at "shared-mailboxes" dictionary?
by Peer Heinlein 19 Jan '10

19 Jan '10

Using imapsync I changed many ACLs on many accounts simultaneously in four concurrent IMAP-sessions. I started with an empty file "shared-mailboxes". But after the sync the file "shared-mailboxes" has been crashed. I found broken lines and I'm missing some entrys. Is it possible that there's no filelocking on that file? I used the ext3 filesystem. That's what shred-mailboxes looks like at the moment: shared/shared-box 1 shared/shared-boxes/user/user1.example.com/user2.example.com 1 .example.com/user5.example.com 1 hared/shared-boxes/user/user6.example.com/user4.example.c2442203233424^? 1 ser/user7.example.com/user2.example.com Peer dovecot -n: # 1.2.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.27.39-0.2-default x86_64 openSUSE 11.1 (x86_64) protocols: imap imaps managesieve ssl_cert_file: /etc/ssl/old.pem ssl_key_file: /etc/ssl/old.pem shutdown_clients: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login login_process_per_connection: no login_max_processes_count: 512 max_mail_processes: 1024 mail_max_userip_connections(default): 40 mail_max_userip_connections(imap): 40 mail_max_userip_connections(managesieve): 10 verbose_proctitle: yes mail_uid: vmail mail_gid: vmail mail_location: maildir:~/Maildir mail_executable(default): /usr/lib/dovecot/imap-usernamenmigration mail_executable(imap): /usr/lib/dovecot/imap-usernamenmigration mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugins(default): quota imap_quota acl imap_acl mail_plugins(imap): quota imap_quota acl imap_acl mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib64/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib64/dovecot/modules/imap mail_plugin_dir(managesieve): /usr/lib64/dovecot/modules/managesieve namespace: type: private separator: / inbox: yes list: yes subscriptions: yes namespace: type: shared separator: / prefix: zz_SHARED_ACCOUNTS/%%u/ location: maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u list: yes lda: postmaster_address: postmaster(a)iea-dpc.org mail_plugins: quota acl sieve mail_plugin_dir: /usr/lib64/dovecot/modules/lda quota_full_tempfail: yes auth default: mechanisms: plain login digest-md5 cram-md5 verbose: yes debug: yes debug_passwords: yes passdb: driver: passwd-file args: /etc/dovecot/userdb userdb: driver: passwd-file args: /etc/dovecot/userdb userdb: driver: static args: uid=5001 gid=5001 socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 432 user: vmail group: vmail plugin: quota: maildir quota_rule: *:storage=102400 acl: vfile acl_shared_dict: file:/var/lib/dovecot/shared-mailboxes sieve: ~/.dovecot.sieve sieve_dir: ~/sieve -- Heinlein Professional Linux Support GmbH Linux: Akademie - Support - Hosting http://www.heinlein-support.de Tel: 030 / 40 50 51 - 0 Fax: 030 / 40 50 51 - 19 Zwangsangaben lt. §35a GmbHG: HRB 93818 B / Amtsgericht Berlin-Charlottenburg, Geschäftsführer: Peer Heinlein -- Sitz: Berlin

2 1

[Dovecot] Fail to handle . and - in mailaddresses
by Mika 18 Jan '10

18 Jan '10

Hi, I seem to have run into a bug. Dot and dash is allowed chars in mail addresses, so a ...---...@ should work. Filtered out domainname and IP's for security reasons. And yes this works with MDaemon as example. Setup is postfix using Dovecot for deliver. Version: 1.2.9 OS: Linux ADM64 (Ubuntu 8.04LTS) Tried to deliver mail to rfc compliant mail address ...---...@domain. # 1.2.9: /opt/dovecot/etc/dovecot.conf # OS: Linux 2.6.24-25-server i686 Ubuntu 8.04.3 LTS ext3 log_path: /var/log/dovecot protocols: imaps imap listen: 127.0.0.1 ssl_listen: :943 ssl_cert_file: /etc/ssl/certs/secure.crt ssl_key_file: /etc/ssl/private/secure.key login_dir: /opt/dovecot/var/run/dovecot/login login_executable: /opt/dovecot/libexec/dovecot/imap-login mail_gid: 1005 mail_location: maildir:/opt/vmail/%d/%n/Maildir lda: postmaster_address: postmaster(a)domain.com sendmail_path: /usr/sbin/sendmail auth_socket_path: /var/run/dovecot/auth-master log_path: /opt/vmail/dovecot-deliver.log auth default: mechanisms: plain login passdb: driver: pam passdb: driver: sql args: /opt/dovecot/etc/dovecot-sql.conf userdb: driver: passwd userdb: driver: static args: uid=5000 gid=5000 home=/opt/vmail/%d/%n allow_all_users=yes socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail >From Deliver logfile: deliver(...---...(a)domain.com): Jan 14 08:18:24 Info: msgid=<798c378b1001132318y4a027757m37a668f48730e6c(a)mail.gmail.com>: saved mail to INBOX # Does not seem to end up in any of the files in Maildir, new/tmp folders are empty. Maildir/cur# grep ...---...(a)domain.com * Maildir/cur# //Mika

2 2

[Dovecot] sieve: discarding vacation response
by wenjie zheng 18 Jan '10

18 Jan '10

Configuration: RHEL 5.3, Dovecot 2.0 beta1, dovecot-2.0-sieve (1week old) [wenjie@build dovecot2-2.0.beta1]$ telnet mail4a 24 Trying 172.19.1.74... Connected to mail4a.cloud.dev.mlsrvr.com (172.19.1.74). Escape character is '^]'. 220 mail4a Dovecot LMTP ready mail from:<testmail4a50(a)dev.p4nt5.com> 250 2.1.0 OK rcpt to:<testmail4a2(a)dev.p4nt5.com> 250 2.1.5 OK DATA 354 OK From: <testmail4a50(a)dev.p4nt5.com> To: foo Subject: hello Hello there . 250 2.0.0 <testmail4a2(a)dev.p4nt5.com> eMcYKg7gUEt8ewAA0TR52A Saved quit 221 2.0.0 Client quit Connection closed by foreign host. testmail4a2(a)dev.p4nt5.com has a local .dovecot.sieve file, which contains a vacation auto response. #begin require ["fileinto", "body", "vacation"]; vacation :days 1 text: I am away. . ; keep; #end In the log: Jan 15 15:38:07 mail4a dovecot: lmtp(31612, testmail4a2(a)dev.p4nt5.com) eMcYKg7gUEt8ewAA0TR52A: sieve: msgid=unspecified: discarding vacation response for message implicitly delivered to <testmail4a2(a)dev.p4nt5.com> Jan 15 15:38:07 mail4a dovecot: lmtp(31612, testmail4a2(a)dev.p4nt5.com) eMcYKg7gUEt8ewAA0TR52A: sieve: msgid=unspecified: stored mail into mailbox 'INBOX' Thanks, Wenjie

2 2

[Dovecot] Upgrade path questions
by Thomas M Goerger 18 Jan '10

18 Jan '10

Hi, We are currently running Dovecot v1.1.6 on our servers, and are contemplating an upgrade to 1.2, or 2.0 soon. We are wondering how many organizations are still running a 1.1 version of Dovecot, and if anyone has any thoughts on this transition. Have you upgraded from 1.1 to 1.2? What are your experiences with this? Have you upgraded from 1.1 to 2.0 directly? What are your experiences this way? We are also running an environment with both mbox and maildir formats. How many of you are running similarly, or are running solely maildir or mbox? We're just looking to gather information going forward, and anything you might be able to contribute would be very helpful. Thanks! ************************************************************************* * Tom Goerger - Email/Unix System Administrator * * * * University of Minnesota Email: tmg(a)umn.edu * * Operations, Infrastructure and Architecture Phone: 4-5804 * * Internet Services Office: 626J WBOB * * * *************************************************************************

4 3

[Dovecot] Inotify instance limit for user exceeded
by Lampa 18 Jan '10

18 Jan '10

Hello, i saw in my log followed messages: dovecot: 2010-01-18 13:20:54 Warning: IMAP(user1(a)domain1.com): Inotify instance limit for user exceeded, disabling. dovecot: 2010-01-18 13:21:01 Warning: IMAP(user2(a)domain2.com): Inotify instance limit for user exceeded, disabling. dovecot: 2010-01-18 13:21:23 Warning: IMAP(user2(a)domain2.com: Inotify instance limit for user exceeded, disabling. dovecot -c dovecot-domain1.com.conf -n: # 1.0.10: dovecot-domain1.com.conf remax-czech.cz base_dir: /var/run/domain1.com log_path: /var/log/dovecot/domain1.com/dovecot.log info_log_path: /var/log/dovecot/domain1.com/info.log log_timestamp: %F %T protocols: imap imaps pop3 pop3s listen: 127.0.0.1 ssl_cert_file: /usr/local/ssl/mail/domain1.comserver.crt ssl_key_file: /usr/local/ssl/mail/domain1.com/server.key disable_plaintext_auth: no verbose_ssl: yes login_dir: /var/run/dovecot-domain1.com/login login_executable(default): /usr/local/dovecot/bin/dovecot/imap-login login_executable(imap): /usr/local/dovecot/bin/dovecot/imap-login login_executable(pop3): /usr/local/dovecot/bin/dovecot/pop3-login login_max_processes_count: 40 login_max_connections: 42 max_mail_processes: 2000 verbose_proctitle: yes first_valid_uid: 507 last_valid_uid: 507 first_valid_gid: 502 last_valid_gid: 502 fsync_disable: yes mail_executable(default): /usr/local/dovecot/bin/dovecot/imap mail_executable(imap): /usr/local/dovecot/bin/dovecot/imap mail_executable(pop3): /usr/local/dovecot/bin/dovecot/pop3 mail_process_size: 300 mail_plugin_dir(default): /usr/local/dovecot-1.0.10/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/dovecot-1.0.10/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/dovecot-1.0.10/lib/dovecot/pop3 pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv auth default: mechanisms: plain login user: vmail verbose: yes passdb: driver: vpopmail userdb: driver: vpopmail There is about 2500 users on domain1.com, so i should raise max_mail_processes ? -- Lampa

2 1

[Dovecot] unlinking
by David Halik 18 Jan '10

18 Jan '10

Quick question. How important are these? Are the errors recoverable and not a big deal, or are they actually a problem? I see a few of these randomly over the course of the day. Jan 15 10:04:04 gehenna13.rutgers.edu dovecot: IMAP(user): unlink(/rci/nqu/rci/u8/user/dovecot/.such and such maildir/.nfs00000000001e951000002b8d) failed: Device or resource busy Jan 15 10:04:04 gehenna13.rutgers.edu dovecot: IMAP(user): unlink(/rci/nqu/rci/u8/user/dovecot/.such and such maildir/.nfs00000000001e951000002b8d) failed: Device or resource busy Jan 15 10:04:04 gehenna13.rutgers.edu dovecot: IMAP(user): unlink_directory(/rci/nqu/rci/u8/user/dovecot/.such and such maildir) failed: Device or resource busy Jan 15 10:04:04 gehenna13.rutgers.edu dovecot: IMAP(user): unlink_directory(/rci/nqu/rci/u8/user/dovecot/.such and such maildir) failed: Device or resource busy -- ================================ David Halik System Administrator OIT-CSS Rutgers University dhalik(a)jla.rutgers.edu ================================

3 3

[Dovecot] Strange permission problem with Maildir
by tkin1t3asy 18 Jan '10

18 Jan '10

I have this very strange problem with Dovecot spitting out a file permissions error but further testing seems to show it being an inaccurate message. POP3(username): maildir: data ~/Maildir POP3(username): maildir++: root =/home/ssb201/Maildir, index=, control=, inbox=/home/ssb201/Maildir POP3(username): stat(/home/username/Maildir/tmp) failed: Permission denied (euid=500(username) egid=500(username) missing +x perm: /home/username/Maildir) POP3(username): Couldn't open INBOX... as you can see below the permissions are correct: root@host:/home/username# ls -al Maildir/ total 744 drwx------ 8 username username 220 2010-01-13 06:27 . drwxr-xr-x 18 username username 80 2010-01-13 06:14 .. drwx------ 2 username username 108480 2010-01-14 20:56 cur -rw------- 1 username username 65272 2010-01-14 20:56 dovecot.index -rw------- 1 username username 382976 2010-01-14 20:56 dovecot.index.cache -rw------- 1 username username 6836 2010-01-14 20:56 dovecot.index.log -rw------- 1 username username 309472 2010-01-14 20:56 dovecot-uidlist -rw------- 1 username username 8 2010-01-14 20:56 dovecot-uidvalidity -rw------- 1 username username 0 2010-01-14 20:56 dovecot-uidvalidity.4a090e80 drwx------ 2 username username 40 2010-01-14 20:56 new drwx------ 2 username username 40 2010-01-14 20:56 tmp if I rename ~/Maildir to ~/Maildir.orig and let dovecot create a new directory it works fine with no errors. root@host:/home/username# ls -al Maildir total 28 drwx------ 5 username username 220 2010-01-14 21:19 . drwxr-xr-x 19 username username 100 2010-01-14 21:19 .. drwx------ 2 username username 40 2010-01-14 21:19 cur -rw------- 1 username username 16384 2010-01-14 21:19 dovecot.index.cache -rw------- 1 username username 468 2010-01-14 21:19 dovecot.index.log -rw------- 1 username username 70 2010-01-14 21:19 dovecot-uidlist -rw------- 1 username username 8 2010-01-14 21:19 dovecot-uidvalidity -rw------- 1 username username 0 2010-01-14 21:19 dovecot-uidvalidity.4b4f8a6e drwx------ 2 username username 60 2010-01-14 21:19 new drwx------ 2 username username 40 2010-01-14 21:19 tmp If I rename the newly created ~/Maildir to ~/Maildir.new, and rename ~/Maildir.orig to ~/Maildir the original directory works now with no "+x perm" error. This would seem to imply that dovecot is modifying something, somewhere else on the system when it creates the mail directory. What could this be? -- View this message in context: http://old.nabble.com/Strange-permission-problem-with-Maildir-tp27168284p27… Sent from the Dovecot mailing list archive at Nabble.com.

2 1

[Dovecot] how-to use dsync to do a 2 ways replication ?
by Eric Belhomme 18 Jan '10

18 Jan '10

Hi, I want to set-up two dovecot imap servers, with active-active replicated maildirs. The goal is to have a hosted public server on Internet, and a private server on my LAN to speed-up local connections. So I compiled dovecot 2.0 beta 1 in order to use dsync utility... Actually my config is pretty simple as I just want to setup a proof of concept before going ahead in this way : (Both servers are Debian Lenny with excatly the same config) mail0:~# /usr/local/dovecot2/sbin/dovecot -n # 2.0.beta1: /etc/dovecot2/dovecot/dovecot.conf # OS: Linux 2.6.26-2-686 i686 Debian 5.0.3 auth_debug = yes auth_verbose = yes login_trusted_networks = 172.16.64.0/18 mail_location = maildir:%h passdb { args = /etc/dovecot/userpasswd deny = no driver = passwd-file } postmaster_address = postmaster(a)example.com service pop3-login { inet_listener { port = 110 } inet_listener { port = 995 ssl = yes } } service imap-login { inet_listener { port = 143 } inet_listener { port = 993 ssl = yes } } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = prefetch } userdb { args = /etc/dovecot/userpasswd driver = passwd-file } I logged on the first server with an IMAP client then I copied many email through IMAP, then I launched dsync as root : /usr/local/dovecot2/bin/dsync -v mirror 'ssh eole.it.fr.eve /usr/local/dovecot2/bin/dsync' root(a)eole.it.fr.eve's password: dsync-local(root): Error: Can't create mailbox ssh: Mailbox already exists dsync-local(root): Error: Can't create mailbox aptitude: Mailbox already exists dsync-local(root): Error: Can't create mailbox debtags: Mailbox already exists dsync-local(root): Info: debtags: only in source dsync-local(root): Info: aptitude: only in source dsync-local(root): Info: ssh: only in source dsync-local(root): Info: ssh: only in dest dsync-local(root): Info: aptitude: only in dest dsync-local(root): Info: debtags: only in dest dsync-local(root): Error: Mailbox ssh changed its GUID (cdfc9a2d85154e4b47180000b31a5865 -> 541e9f2850234e4b3a2b0000d0cf7273) dsync-local(root): Error: msg iteration failed: Couldn't open mailbox dsync-remote(root): Error: Can't create mailbox debtags: Mailbox already exists dsync-remote(root): Error: Can't create mailbox aptitude: Mailbox already exists dsync-remote(root): Error: Can't create mailbox ssh: Mailbox already exists dsync-remote(root): Error: Mailbox debtags changed its GUID (501e9f2850234e4b3a2b0000d0cf7273 -> d1fc9a2d85154e4b47180000b31a5865) dsync-remote(root): Error: msg iteration failed: Couldn't open mailbox dsync-remote(root): Error: command MSG-LIST failed dsync-local(root): Error: Mailbox ssh changed its GUID (cdfc9a2d85154e4b47180000b31a5865 -> 541e9f2850234e4b3a2b0000d0cf7273) dsync-local(root): Error: Mailbox aptitude changed its GUID (cffc9a2d85154e4b47180000b31a5865 -> 521e9f2850234e4b3a2b0000d0cf7273) dsync-local(root): Error: Mailbox debtags changed its GUID (d1fc9a2d85154e4b47180000b31a5865 -> 501e9f2850234e4b3a2b0000d0cf7273) dsync-local(root): Error: Mailbox ssh changed its GUID (cdfc9a2d85154e4b47180000b31a5865 -> 541e9f2850234e4b3a2b0000d0cf7273) dsync-local(root): Error: Mailbox aptitude changed its GUID (cffc9a2d85154e4b47180000b31a5865 -> 521e9f2850234e4b3a2b0000d0cf7273) dsync-local(root): Error: Mailbox debtags changed its GUID (d1fc9a2d85154e4b47180000b31a5865 -> 501e9f2850234e4b3a2b0000d0cf7273) mail0:~# dsync-remote(root): Error: Mailbox debtags changed its GUID (501e9f2850234e4b3a2b0000d0cf7273 -> d1fc9a2d85154e4b47180000b31a5865) dsync-remote(root): Error: Mailbox aptitude changed its GUID (521e9f2850234e4b3a2b0000d0cf7273 -> cffc9a2d85154e4b47180000b31a5865) dsync-remote(root): Error: Mailbox ssh changed its GUID (541e9f2850234e4b3a2b0000d0cf7273 -> cdfc9a2d85154e4b47180000b31a5865) dsync-remote(root): Error: Mailbox debtags changed its GUID (501e9f2850234e4b3a2b0000d0cf7273 -> d1fc9a2d85154e4b47180000b31a5865) dsync-remote(root): Error: Mailbox aptitude changed its GUID (521e9f2850234e4b3a2b0000d0cf7273 -> cffc9a2d85154e4b47180000b31a5865) dsync-remote(root): Error: Mailbox ssh changed its GUID (541e9f2850234e4b3a2b0000d0cf7273 -> cdfc9a2d85154e4b47180000b31a5865) It seems dsync tries to use my system user database instead of the /etc/dovecot/userpasswd file ! I found dsync doc on the wiki at http://wiki2.dovecot.org/Tools/dsync but this is not really clear for me... So maybe someone can tell me what's wrong ? Regards, -- Eric Belhomme

2 1

[Dovecot] Adding support for a new storage format - plugin?
by Brad Hards 18 Jan '10

18 Jan '10

Hi, I've spent a little bit of time looking at the dovecot source (from the unstable 2.0 development tree), and I think I'm starting to get it together... Background: I'm interested in dovecot to provide IMAP access to an existing database backed server store (http://www.openchange.org for more details). The goal is to provide parallel access using either IMAP or the exchange RPC protocol. If I understand this stuff: * I can potentially provide access to the store using a plugin. It looks like the virtual mailbox plugin is a potential example here. * I may need to also provide an authentication plugin (not sure whether I can just re-use the existing ldap backend - quite possibly a useful option in my scenario) * I probably can't use the existing SQL code, since it uses its own schema. * I may need to provide some locking to ensure things are always in a consistent state for both IMAP and exchange RPC. Comments? Suggestions? Brad

2 1

[Dovecot] listen to imap*s* on multiple ports?
by Frank Cusack 17 Jan '10

17 Jan '10

<http://wiki.dovecot.org/QuestionsAndAnswers#Is_it_possible_to_have_Dovecot_…> is out of date. How can I listen to ssl-wrapped IMAP on multiple ports? I need to listen on both 993 (for some stupid clients I have to support that can't do START TLS) and 80 (to get past L3/L4 firewalls). I'd like to do it in dovecot rather than use nc, ipfilter or whatever. -frank

3 4

[Dovecot] handling filename of compressed messages
by Leonardo Rodrigues 17 Jan '10

17 Jan '10

i'm running dovecot 1.2.9 and, among other things, i have the zlib plugin enabled. A shell script runs once a day to compresses all not still compressed files on the users maildirs. so far so good, it works fine, there's no problem on that. what i think is not happening 100% correctly is the following: 1) user receives a message 2) BEFORE the compress routine runs, filename is: new/1263436052.V6814I43300b4M146002.correio.domain.com.br,S=238207 3) AFTER the compress routine, filename is now: new/1263436052.V6814I43300b4M146002.correio.domain.com.br,S=238207.gz 4) user check his mail .... and now the filename is cur/1263436052.V6814I43300b4M146002.correio.domain.com.br,S=238207.gz:2,S 5) user replies that mail .... and now the filename is cur/1263436052.V6814I43300b4M146002.correio.domain.com.br,S=238207.gz:2,RS i'm aware that dovecot doesnt need the '.gz' extension on the file to recognize that as a gzipped file. Even without the .gz extension, dovecot is correctly reading the file. the '.gz' is not even necessary on the filename and still dovecot can handle it fine. anyway, i would like to suggest dovecot to handle the filename to keep the .gz extension, if that exists. This could help sysadmins to easily identify gzipped files on the maildirs and make anything with them, if that's desired. i would like to see dovecot changing filenames properly and keeping the .gz extension always, for example cur/1263436052.V6814I43300b4M146002.correio.domain.com.br,S=238207:2,S.gz instead of cur/1263436052.V6814I43300b4M146002.correio.domain.com.br,S=238207.gz:2,S cur/1263436052.V6814I43300b4M146002.correio.domain.com.br,S=238207:2,RS.gz instead of cur/1263436052.V6814I43300b4M146002.correio.domain.com.br,S=238207.gz:2,RS -- Atenciosamente / Sincerily, Leonardo Rodrigues Solutti Tecnologia http://www.solutti.com.br Minha armadilha de SPAM, NÃO mandem email gertrudes(a)solutti.com.br My SPAMTRAP, do not email it

6 11

[Dovecot] sieve: failed to save binary
by wenjie zheng 15 Jan '10

15 Jan '10

RHEL 5.3 Dovecot 2.0 beta1 dovecot-sieve (updated 1 week ago, changeset a3eb0b0b2ddf) Jan 15 11:30:06 mail4a dovecot: lmtp(31015, testmail4a2(a)dev.p4nt5.com) sieve: using sieve path for user's script: /data/mail/de/ dev.p4nt5.com/te/testmail4a2/.dovecot.sieve Jan 15 11:30:06 mail4a dovecot: lmtp(31015, testmail4a2(a)dev.p4nt5.com) sieve: executed before user's script(1): /etc/dovecot/dovecot-global-sieve.sieve Jan 15 11:30:06 mail4a dovecot: lmtp(31015, testmail4a2(a)dev.p4nt5.com) afEDDB6mUEsneQAA0TR52A: sieve: failed to save binary: open(/etc/dovecot/dovecot-global-sieve.svbinmail4a.31015.) failed: Permission denied (euid=5000(virtual) egid=5000(virtual) missing +w perm: /etc/dovecot) It seems that Dovecot wants to save it as something specific with a different name. Even running sievec manually does not make it work. Thanks, Wenjie

2 1

[Dovecot] Moving
by Timo Sirainen 15 Jan '10

15 Jan '10

I'm moving back to Finland tomorrow. It's probably going to take a week or so until things settle down and I'm again back to coding.

6 12

[Dovecot] shared namespace bug?
by Patrick Kaiser 14 Jan '10

14 Jan '10

Hi, finally i got shared namespace up and running. But for example if user peter.griffin shares his inbox to another user, the LIST "" "*" output on telnet looks like: a02 LIST "" "*" * LIST (\HasNoChildren) "/" "Trash" * LIST (\HasNoChildren) "/" "INBOX" * LIST (\Noselect) "/" "shared/peter.griffi" * LIST (\HasChildren) "/" "shared/peter.griffin" * LIST (\HasNoChildren) "/" "shared/peter.griffinINBOX" a02 OK List completed. To share the inbox I previously run as logged in user peter.griffin a02 SETACL inbox peter.griffin lwxrk If I look in thunderbird, i can see under "share" two folders: peter.griffi and peter.griffin. Have i made something wrong, or is this a bug? Hope someone can help me. thanks, patrick -- Name : Patrick Kaiser Email : patrick.kaiser(a)argonius.de Phone : +49 (178) 8452388 Website : http://www.argonius.de GPG Key : http://www.argonius.de/key.pub

2 4

[Dovecot] uw-imap compatability hack?
by Simon Annetts 14 Jan '10

14 Jan '10

Hi all Apologies if this question has already been asked before... I'm migrating from a uw-imap setup where the mail folders were in a subdir mail/ in the users' home directories. All of the clients are configured with 'IMAP server directory' set to mail/ (Thunderbird) and it would be difficult to change this on the clients (there are 1000s of them) I want to use maildir and I have converted the original mbox files in ~mail/ to maildir format. So in ~Maildir/ I now have: cur dovecot.index dovecot.index.cache dovecot.index.log dovecot-uidlist .Drafts new .Sent-Items .Spam subscriptions tmp .Trash if I remove the mail/ setting from 'IMAP server directory' in the client, then everything works as expected and all the folders are visible. With this setting in however, only the inbox is visible and attempts to click on another folder, say Trash result in the client error: Mailbox doesn't exist .mail.Trash I've tried various namespace configurations I found in the namespaces wiki example but none seem to work. What I would really like to happen is for dovecot to ignore this setting supplied by the client and not to prepend .mail onto the folders it is looking for. Is there a clever namespace that will do this for me, or some other setting or symlink trickery? Ultimately I want to support clients that might have both mail/ and nothing set in this box. Using dovecot 1.07. kind regards Simon -- This e-mail and any attachment is confidential. If you have received it in error, please delete it from your system, do not use or disclose the information in any way, and notify me immediately. The contents of this message may contain personal views which are not necessarily the views of Ateb Ltd, unless specifically stated. Mae'r e-bost hwn ac unrhyw atodiad sydd ynghlwm wrtho, yn gyfrinachol. Os yw wedi eich cyrraedd mewn camgymeriad dilëwch ef oddi ar eich system. Peidiwch â defnyddio na datgelu'r wybodaeth mewn unrhyw ffordd a rhowch wybod imi ar unwaith os gwelwch yn dda. Gall y neges gynnwys barn bersonol nad yw o anghenraid yn farn Ateb Cyf, oni ddywedir hynny'n benodol. *********************************** Ateb Ltd. Company No. 3769059 VAT No. 736568987 Registered Address: Marteg House, St. Harmon, Rhayader, Powys LD6 5LG T: 01597 870329 M: 07932 014055 ***********************************

2 2