- dovecot - dovecot.org

[Dovecot] Question about quota configuration
by przemek.orzechowski＠makolab.pl 06 Feb '12

06 Feb '12

Hi This is my first post here so i will be as precise as i can I'm trying to setup a quota system using dovecot postfix and procmail dovecot version 1.2.9 postfix version 2.7.0 I have succesfully modified dovecot config to use fs quota system (so far imap and pop3) It reports correct quotas to imap and pop3 clients (both user and group) What im tryin to do now is to modify postfix->procmail->dovecot config in a way that if user is over quota mail delivery is delayed instead of bouncing. (is this possible?) Second thing i would like to achive is that when authenticated users close to quota/group quota for example 10MB to quota limit try sending email theyr mail is rejected and preferably an email is generated telling them to free some space for new mails first. (is such a thing possible?) MS Exchange servers have such a feature and I would like to get such a functionality on my linux mailserver I'm trying to prevent a situation when mails are lost due to quota problems. This setup was initially a typical virtualmin installation with a system on single partition. Thanks in advance for all Your suggestions

7 8

[Dovecot] dovecot-antispam 1.3 and dovecot 1.2.17 fails with spool2dir
by Benny Pedersen 06 Feb '12

06 Feb '12

or have i missed something in compile or configure in dovecot.conf ? running on gentoo so i can compile if need another option, i just like to have it working so each user can train bayes global db no matter what user agent users using

1 0

[Dovecot] doveadm purge on shared storage
by Jan-Frode Myklebust 06 Feb '12

06 Feb '12

We've finally (!) started to put some users on mdbox instead of maildir, and now I'm wondering about the purge step. As we're running GPFS for the mailboxes (and dovecot director in front of every dovecot service), is it important to run the "doveadm purge -u $user" on the same host as $user is logged into to avoid index corruption ? If so, will we need to run the "doveadm purge" trough the dovecot director as well? -jf

2 1

Re: [Dovecot] Sieve notify messages
by Stephan Bosch 05 Feb '12

05 Feb '12

On 2/5/2012 4:57 PM, Andreas Muehlemann wrote: > Hi Stephan > > Thank you very much, the encodeurl and ?body= are the trick! > For posterity, please reply to the mailing list as well, especially when it is a success message ;) Regards, Stephan. > > On 02/05/2012 04:46 PM, Stephan Bosch wrote: >> On 2/5/2012 4:00 PM, Andreas Muehlemann wrote: >>> Hi All >>> >>> I'm using dovecot 2.0.16 with the pigeonhole plugin 0.25. >>> >>> I'm trying to use the notifiy mechanism from sieve to send >>> notifications when a mail arrives in the mailbox. The message is >>> checked to be a 8bit message, otherwise it is replaced by the >>> default message "Notification of new message." How can I create a >>> 8bit message body within the sieve script that is accepted by the >>> notification process? >>> >>> e.g. >>> notify >>> :message "Subject: ${subject}" >>> "mailto:email@domain.com"; >>> >>> Do I have to put the message body into the :message string? Or how >>> can I define a custom message body that is accepted by notify? >> >> If I understand you correctly, the following should be the solution >> for your issue: >> >> <SCRIPT> >> require "enotify"; >> require "variables"; >> require "encoded-character"; >> >> # Percent-encode the UTF-8 message >> # (I'm using encoded-character here, but you can use UTF8 directly of >> course) >> set :encodeurl "message" "In ${unicode:d6}sterreich m${unicode:e4}ht >> Herr M${unicode:fc}ller seinen Rasen ${unicode:fc}brigens auch >> ${unicode:fc}ber dem Durchschnitt schnell."; >> >> # Send the notification >> notify :message "Herr M${unicode:fc}ller m${unicode:e4}ht seinen >> Rasen" "mailto:user@example.com?body=${message}"; >> </SCRIPT> >> >> This sends the following message: >> >> <MESSAGE> >> X-Sieve: Pigeonhole Sieve 0.3.0 >> Message-ID: <dovecot-sieve-1328456217-863910-0(a)host.example.com> >> Date: Sun, 05 Feb 2012 16:36:57 +0100 >> Subject: Herr =?utf-8?q?M=C3=BCller_m=C3=A4ht?= seinen Rasen >> From: Postmaster <postmaster(a)example.com> >> To: user(a)example.com >> Auto-Submitted: auto-notified; >> owner-email="234234234234(a)ext2.domain.tld" >> Precedence: bulk >> X-Priority: 3 (Normal) >> Importance: Normal >> MIME-Version: 1.0 >> Content-Type: text/plain; charset=UTF-8 >> Content-Transfer-Encoding: 8bit >> >> In Österreich mäht Herr Müller seinen Rasen übrigens auch über dem >> Durchschnitt schnell. >> </MESSAGE> >> >> Regards, >> >> Stephan >

1 0

[Dovecot] Sieve notify messages
by Andreas Muehlemann 05 Feb '12

05 Feb '12

Hi All I'm using dovecot 2.0.16 with the pigeonhole plugin 0.25. I'm trying to use the notifiy mechanism from sieve to send notifications when a mail arrives in the mailbox. The message is checked to be a 8bit message, otherwise it is replaced by the default message "Notification of new message." How can I create a 8bit message body within the sieve script that is accepted by the notification process? e.g. notify :message "Subject: ${subject}" "mailto:email@domain.com"; Do I have to put the message body into the :message string? Or how can I define a custom message body that is accepted by notify? Best regards Andreas

2 1

[Dovecot] What does this /var/log/maillog message means?
by Andre Lopes 04 Feb '12

04 Feb '12

Hi, I'm, trying to configure Devcot(2.0.9). Here is my dovecot.conf: [code] protocols = imap pop3 lmtp log_timestamp = "%Y-%m-%d %H:%M:%S " mail_location = maildir:/home/vmail/%d/%n/Maildir ssl_cert = /etc/pki/dovecot/certs/dovecot.pem ssl_key = /etc/pki/dovecot/private/dovecot.pem namespace { type = private separator = . prefix = INBOX. inbox = yes } protocol lda { log_path = /home/vmail/dovecot-deliver.log auth_socket_path = /var/run/dovecot/auth-master postmaster_address = postmaster(a)mailserver.com } service auth { user = root } passdb { driver = sql args = /etc/dovecot/dovecot-sql.conf } userdb { driver = static args = uid=5000 gid=5000 home=/home/vmail/%d/%n allow_all_users=yes } [/code] I can start the service correctly: [code] [root@mailserver dovecot]# service dovecot start Starting Dovecot Imap: [ OK ] [/code] But when I go to "/var/log/maillog" I get this: [code] Feb 3 14:37:59 www dovecot: master: Warning: Killed with signal 15 (by pid=16757 uid=0 code=kill) Feb 3 14:38:03 www dovecot: master: Dovecot v2.0.9 starting up (core dumps disabled) [/code] What does this mean? I'm doing something that is not correct? Best Regards,

2 1

[Dovecot] Managesieve Build failure
by Ralf Hildebrandt 04 Feb '12

04 Feb '12

I pulled the recent dovecot-2.0-pigeonhole and dovecot 2.0.x trees and rebuild, got this error today: ... make[3]: Leaving directory /usr/src/dovecot-2.0/dovecot-2.0-pigeonhole/src/managesieve' make[2]: Leaving directory /usr/src/dovecot-2.0/dovecot-2.0-pigeonhole/src/managesieve' Making install in managesieve-login make[2]: Entering directory /usr/src/dovecot-2.0/dovecot-2.0-pigeonhole/src/managesieve-login' /bin/bash ../../libtool --tag=CC --mode=link gcc -I/usr/src/dovecot-2.0/dovecot-2.0/src/config -DPKG_LIBEXECDIR=\""/usr/local/libexec/dovecot"\" -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -Wstrict-aliasing=2 -module -avoid-version -g -Wl,--as-needed -o libmanagesieve_login_settings.la -rpath /usr/local/lib/dovecot/settings libmanagesieve_login_settings_la-managesieve-login-settings.lo libmanagesieve_login_settings_la-managesieve-login-settings-plugin.lo -lrt gcc -DHAVE_CONFIG_H -I. -I../.. -I/usr/src/dovecot-2.0/dovecot-2.0 -I/usr/src/dovecot-2.0/dovecot-2.0/src/lib -I/usr/src/dovecot-2.0/dovecot-2.0/src/lib-dict -I/usr/src/dovecot-2.0/dovecot-2.0/src/lib-dns -I/usr/src/dovecot-2.0/dovecot-2.0/src/lib-mail -I/usr/src/dovecot-2.0/dovecot-2.0/src/lib-imap -I/usr/src/dovecot-2.0/dovecot-2.0/src/lib-fs -I/usr/src/dovecot-2.0/dovecot-2.0/src/lib-charset -I/usr/src/dovecot-2.0/dovecot-2.0/src/lib-index -I/usr/src/dovecot-2.0/dovecot-2.0/src/lib-storage -I/usr/src/dovecot-2.0/dovecot-2.0/src/lib-storage/index -I/usr/src/dovecot-2.0/dovecot-2.0/src/lib-storage/index/raw -I/usr/src/dovecot-2.0/dovecot-2.0/src/lib-master -I/usr/src/dovecot-2.0/dovecot-2.0/src/lib-settings -I/usr/src/dovecot-2.0/dovecot-2.0/src/lib-auth -I/usr/src/dovecot-2.0/dovecot-2.0/src/login-common -I../.. -I../../src/lib-managesieve -g -Wl,--as-needed -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -Wstrict-aliasing=2 -MT managesieve-proxy.o -MD -MP -MF .deps/managesieve-proxy.Tpo -c -o managesieve-proxy.o managesieve-proxy.c managesieve-proxy.c: In function ‘managesieve_proxy_parse_line’: managesieve-proxy.c:334:19: error: ‘const struct login_settings’ has no member named ‘verbose_auth’ make[2]: *** [managesieve-proxy.o] Error 1 -- Ralf Hildebrandt Geschäftsbereich IT | Abteilung Netzwerk Charité - Universitätsmedizin Berlin Campus Benjamin Franklin Hindenburgdamm 30 | D-12203 Berlin Tel. +49 30 450 570 155 | Fax: +49 30 450 570 962 ralf.hildebrandt(a)charite.de | http://www.charite.de

2 1

[Dovecot] Vacation via database
by list＠airstreamcomm.net 04 Feb '12

04 Feb '12

We are moving our inbound mail to use dovecot LMTP in the near future and we are looking for suggestions on how to implement a mysql based vacation system. If anyone has experience with this, good or bad please let us know.

5 6

[Dovecot] LDAP auth improvements
by Timo Sirainen 03 Feb '12

03 Feb '12

v2.1 supports now multiple LDAP fields in a template e.g.: user_attrs = \ homeDirectory=home, \ uidNumber=uid, \ gidNumber=gid, \ =mail=%{ldap:mailboxFormat}:%{ldap:homeDirectory} which is the same as: user_attrs = \ =home=%{ldap:homeDirectory}, \ =uid=%{ldap:uidNumber}, \ =gid=%{ldap:gidNumber}, \ =mail=%{ldap:mailboxFormat}:%{ldap:homeDirectory} I was also thinking about adding an alternative simplified syntax for this: user_attrs { home = %{ldap:homeDirectory} uid = %{ldap:uidNumber} gid = %{ldap:gidNumber} mail = %{ldap:mailboxFormat}:%{ldap:homeDirectory} } Any ideas for further improvements before I do this change? One thing I'm still wondering about is what I should do when LDAP returns multiple values. Like perhaps: acl_groups = %{ldap:aclGroups:,} Which would mean that all the aclGroups values would be joined together separated by "," characters. And a bit more complex with multiple gidNumbers: gid = %{ldap:gidNumber[0]} mail_access_groups = %{ldap:gidNumber[1:]:,}

2 1

[Dovecot] Errors starting Dovecot
by Andre Lopes 03 Feb '12

03 Feb '12

Hi, I'm new to Dovecot. I'm trying to start Dovecot(2.0.9) but I'm getting an error. I think the error is because I'm doing a tutorial for an old version of Devcot(1.x.x). What I get is the following: [code] [root@mailserver dovecot]# service dovecot start Starting Dovecot Imap: doveconf: Warning: NOTE: You can get a new clean config file with: doveconf -n > dovecot-new.conf doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:1: protocols=imaps is no longer necessary, remove it doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:1: protocols=pop3s is no longer necessary, remove it doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:5: ssl_cert_file has been replaced by ssl_cert = <file doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:6: ssl_key_file has been replaced by ssl_key = <file doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:8: namespace private {} has been replaced by namespace { type=private } doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:24: add auth_ prefix to all settings inside auth {} and remove the auth {} section completely doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:25: auth_user has been replaced by service auth { user } doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:27: passdb sql {} has been replaced by passdb { driver=sql } doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:31: userdb static {} has been replaced by userdb { driver=static } [ OK ] [/code] My dovecot.conf have the following: [code] protocols = imap imaps pop3 pop3s log_timestamp = "%Y-%m-%d %H:%M:%S " mail_location = maildir:/home/vmail/%d/%n/Maildir ssl_cert_file = /etc/pki/dovecot/certs/dovecot.pem ssl_key_file = /etc/pki/dovecot/private/dovecot.pem namespace private { separator = . prefix = INBOX. inbox = yes } protocol lda { log_path = /home/vmail/dovecot-deliver.log auth_socket_path = /var/run/dovecot/auth-master postmaster_address = postmaster(a)example.com } protocol pop3 { pop3_uidl_format = %08Xu%08Xv } auth default { user = root passdb sql { args = /etc/dovecot-sql.conf } userdb static { args = uid=5000 gid=5000 home=/home/vmail/%d/%n allow_all_users=yes } socket listen { master { path = /var/run/dovecot/auth-master mode = 0600 user = vmail } client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } } } [/code] Any clues on how can I adapt this configuration file to Dovecot 2.0.9? Best Regards,

1 0