- dovecot - dovecot.org

[Dovecot] UNSUBSCRIBE
by Eric B. Schorvitz, Ph.D. 19 Feb '09

19 Feb '09

2 1

[Dovecot] limiting authentication failures
by Eric B. Schorvitz, Ph.D. 19 Feb '09

19 Feb '09

In my log files I occasionally get a huge number of Dovecot authentication failures (see clip below). I wanted to know if there's a way to limit the number of times an IP address can attempt to authenticate, if there's a way to have a timeout between attempted authentications, or if there is a way to limit authentication attempts by a specific username within a certain period of time. My current solution is to permanently block the specific IP, an IP range, or an entire country from accessing my server AFTER I notice the huge number of authentication failures. This is too ad-hoc a process and was hoping dovecot has something more proactive built in. Thank you in advance for spending time considering this inquiry, Eric --------------------- pam_unix Begin ------------------------ dovecot: Authentication Failures: rhost=::ffff:200.111.39.219 : 764 Time(s) root: 25 Time(s) mysql: 6 Time(s) smmsp: 6 Time(s) --SNIP-- Unknown Entries: check pass; user unknown: 764 Time(s) ---------------------- pam_unix End ------------------------- --------------------- Connections (secure-log) Begin ------------------------ **Unmatched Entries** dovecot-auth: pam_succeed_if(dovecot:auth): error retrieving information about user info dovecot-auth: pam_succeed_if(dovecot:auth): error retrieving information about user info dovecot-auth: pam_succeed_if(dovecot:auth): error retrieving information about user info dovecot-auth: pam_succeed_if(dovecot:auth): error retrieving information about user info --SNIP--

2 1

[Dovecot] sieve filters
by Ian P. Christian 19 Feb '09

19 Feb '09

Hi all, I'm trying to figure out a way of filtering mail from a commercial anti-spam platform. Unfortunately you need to compare part of one header against part of another header. I figured I could solve this using sieve variables and pattern matching, however I'm having little luck and don't know how to debug sieve issues. # example headers: must compare 0.00799 against 1:0000 (the 2nd number in the 2nd header) # X-pstn-levels: (S: 0.00799/98.42547 CV:99.9000 FC:95.5390 LC:95.5390 R:95.9108 P:95.9108 M:97.0282 C:98.6951 ) # X-pstn-settings: 3 (1.0000:1.0000) s cv gt3 gt2 gt1 r p m c if header :matches "X-pstn-levels" "(S: */*" { set "score" "${1}"; if header :matches "X-pstn-settings" " ? (*:*) *" { fileinto "somewhere"; } } The first if appears to match, as if I move the fileinto up there it works - however it doesn't work as it shown here. Can anyone suggest why? Can I achieve what I'm trying to do with sieve? How can I go about debugging scripts? Thanks, Ian

2 2

[Dovecot] kerberos trying to obtain credentials for wrong machine
by Nikolay Shopik 19 Feb '09

19 Feb '09

Hi, I'm currently trying to configure Dovecot to use kerberos. My KDC is Windows 2003 and I successful generated keytab file for Dovecot machine. Problem is when I'm trying to use GSSAPI it told me Obtaining credentials for imap@debian5 - and of course this fails because debian5 isn't KDC, it should look for imap/debian5.inblock.local(a)INBLOCK.LOCAL. What I'm missing?

2 1

[Dovecot] Time moved backwards ....
by Harry Lachanas 18 Feb '09

18 Feb '09

OK.. So I synced the clock.... and got .... dovecot: Time just moved backwards by 1 seconds. I'll sleep now until we're back in present. http://wiki.dovecot.org/TimeMovedBackwards ( The first time I did this the clock moved backwards 2 hours after a timezone change and dovecot suicided ) I think I understand the concept ... However a mail server should probably be synchronized to the local time ..... Suggestions ...??? Harry.

8 10

[Dovecot] mbox snarf plugin + idle
by Jonathan Siegle 18 Feb '09

18 Feb '09

I'm having a problem with mbox snarf not looking at /var/spool/mail/ when in idle mode thus never giving me a RECENT line even though there are new messages in /var/spool/mail/ . Here are the imap commands to reproduce the problem: 1 login userid password 2 select inbox 3 idle When I run "select inbox" it does see my messages in /var/spool/mail/ and moves them over fine. When I truss the process, I see it only running stat calls on my "mbox- snarf" file. To get new messages I issue DONE, CLOSE, and SELECT INBOX. I'm not sure why it is reporting alpha5 two lines below. I did an hg pull just the other day and see 1.2.beta1 in the output of hg tags. # /usr/ladmin2/sbin/dovecot -n # 1.2.alpha5: /usr/ladmin2/etc/dovecot.conf Warning: fd limit 2000 is lower than what Dovecot can use under full load (more than 4224). Either grow the limit or change login_max_processes_count and max_mail_processes settings # OS: AIX 3 0001112AD300 syslog_facility: local0 protocols: imap listen: *:2222 ssl: no disable_plaintext_auth: no login_dir: /usr/ladmin2/var/run/dovecot/login login_executable: /usr/ladmin2/libexec/dovecot/imap-login login_greeting: Dovecot ready. login_processes_count: 30 max_mail_processes: 4096 mail_location: mbox:%h/new:INBOX=/var/spool/mail/14/%u mmap_disable: yes dotlock_use_excl: no mbox_write_locks: fcntl mbox_lazy_writes: no mail_plugins: mbox_snarf imap_client_workarounds: delay-newmail auth default: mechanisms: plain gssapi krb5_keytab: /etc/krb5/dovecot.keytab gssapi_hostname: $ALL verbose: yes debug: yes passdb: driver: pam userdb: driver: passwd plugin: mbox_snarf: /gpfs/inbox/14/%u Thanks, Jonathan

2 2

Re: [Dovecot] from postfix deliver to dovecot deliver
by dovecot＠corwyn.net 18 Feb '09

18 Feb '09

you're using maildir? (I only ask because I am). In that case, no making the change doesn't require changes in the mailboxes. I made the appropriate changes (just a few days ago) to main.cf and I was good to go. Rick At 08:01 AM 2/18/2009, Johan Hendriks wrote: >Hello all. >I use dovecot in combination with postfix, postfixadmin for virtual users. >Deliver to the mailbox now is done by postfix >Now i want to enable quota's and therefor i need dovecot deliver. >Can i just switch to dovecot deliver? >Or must i first do some prrperations in the mailboxes. > >regards >-- >_______________________ >*Johan Hendriks* >*Schavemaker Transport* > >Tel: +31 (0)251 229098 >Fax: +31 (0)251 212016 >email: j.hendriks(a)schavemaker.com <mailto:j.hendriks@schavemaker.com> >web: http://www.schavemaker.com >_______________________ >/Confidentiality Notice: The information in this document may be >confidential. It is intended only for the use of the named recipient. >If you are not the intended recipient, please notify me immediately >and then delete this document. Do not disclose the contents of this document >to any other person, nor take any copies. Violation of this notice >may be unlawful. / >_______________________

1 0

[Dovecot] assertion failed
by Ian P. Christian 18 Feb '09

18 Feb '09

Does anyone know what might cause this? # dovecot --version 1.1.7 Feb 17 18:21:51 imap-proxy-temp dovecot: Panic: auth(default): file passdb-cache.c: line 121 (passdb_cache_lookup_credentials): assertion failed: (*scheme_r != NULL || *password_r == NULL) Feb 17 18:21:51 imap-proxy-temp dovecot: auth(default): Raw backtrace: dovecot-auth [0x42c0ea] -> dovecot-auth [0x42c143] -> dovecot-auth [0x42b7f6] -> dovecot-auth [0x41acb6] -> dovecot-auth(auth_request_lookup_credentials+0x6f) [0x411cdf] -> dovecot-auth [0x416caf] -> dovecot-auth(auth_request_handler_auth_continue+0xc9) [0x4128e9] -> dovecot-auth [0x40e40a] -> dovecot-auth(io_loop_handler_run+0xf8) [0x42fb48] -> dovecot-auth(io_loop_run+0x1d) [0x42ea4d] -> dovecot-auth(main+0x2f7) [0x416367] -> /lib/libc.so.6(__libc_start_main+0xda) [0x7f83990e54ca] -> dovecot-auth [0x40cdba] Feb 17 18:21:51 imap-proxy-temp dovecot: child 20579 (auth) killed with signal 6

2 4

[Dovecot] Maildir hierarchy sep bug ?
by Thomas Hummel 17 Feb '09

17 Feb '09

Hello Timo, I'm experiencing the following different behaviors with dovecot-1.1.8/Maildir. My Maildir hierarchy separator is the "." (dot) character. My namespaces, when I use them, separator is "/". When I run the server without any namespaces, I can create mailboxes named something like first.name which, of course, are shown to the client as first/ (non selectionnable) first/name For instance in Mutt, if I save a message (the "s" key) from first.name(a)some.domain dovecot happilly creates the .first.name/ Maildir But if I create a public Namespace, then I have to create a private default namespace as well and the server doesn't behave the same way : They're set up like this : namespace private { separator = / prefix = location = maildir:/courriel/boites/%u:CONTROL=/courriel/meta/%u:INDEX=/var/dovecot/indexes/%1u/%u inbox = yes hidden = no list = yes subscriptions = yes } namespace public { separator = / prefix = '#Foo/' location = maildir:/courriel/boites/public/foo inbox = no hidden = yes list = no subscriptions = no } Then users cannot create mailboxes with a dot in it : Character not allowed in mailbox name: '.' which seems normal but can be confusing since, a user used to saving his mail in first.name (in Mutt for instance) wouldn't be able to do so anymore if the server goes from the first to the second setting described above. Granted, a user which does so, probably doesn't do what he thinks he does (he probably thinks he save his message in a folder named "first.name" while instead he actually saves it in a subfolder of "first" named "name"). Still it can be confusing. Is that difference of behavior normal ? Which is the correct behavior ? And is there still no way (except to patch the source) to allow dots in mailbox names in Maildir ? Thanks. -- Thomas Hummel | Institut Pasteur <hummel(a)pasteur.fr> | Pôle informatique - systèmes et réseau

2 7

[Dovecot] Error: IMAP(user): nfs_flush_file_handle_cache_dir: rmdir(/var/mail) failed: Device busy
by Grandy Fu 17 Feb '09

17 Feb '09

Hi, I am running dovecot 1.1.10 and 1.1.11 on Solaris 10, mailboxes are in mbox format and served by Solaris 10 NFSv3, the dovecot cache is on local disk. Some of my users always had above nfs error and their mailbox usually very big, over 100M, 400M, or even 800M. Grandy

2 1