January 2017 - dovecot

[Dovecot] doveadm delete folders ?
by Robert Schetterer 19 Feb '24

19 Feb '24

Hi , is there a feature like doveadm expunge savedbefore ... for imap folder delete ? -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

5 10

Mailbox problem on centos O/S after some "fiddling"
by John Richards 28 May '21

28 May '21

Good day from Somerset, England Version 2.2.10 Problem after a huge centos update Data:- Server has 8 mailboxes under /var/mail/"user name" history:- After update, mail to ONE user was going into mqueue as undeliverable Had to delete and recreate the user. somewhere along the line (ME!) /var/mail/;imap var/mail/new were deleted After new user and reboot server no one could access mailboxes with password error except ONE user randomly....This created the /var/mail/.mbox folder and sub folders but with the owner as the user name. Then any mail for other users was put in the /var/new folder and just sat there. only the "owner" of this folder could get mail, everyone else was prohibited with password error. chown the folder (owner:group) to root did nothing BUT When .mbox was give PUBLIC execute permissions (771) suddenly everything works fine! I do not understand why dovecot creates this folder as we ONLY ever use pop3 (currently with plain text auth but going to secure when this sorted) for mail and also why when it writes the blank folder it "owns" it with the user accessing it (also the /var/mail/new folder takes the same owner) I have trolled everywhere and spent a whole day on this so any clues would be very gratefully accepted as do not like to leave this folder as 771 (note the folder INBOX within it is only 770 and the log file in that is 660) Is this INBOX needed at all for pop3 ? rgds John Richards UK ================= dovecot -n # 2.2.10: /etc/dovecot/dovecot.conf # OS: Linux 3.10.0-514.2.2.el7.x86_64 x86_64 CentOS Linux release 7.3.1611 (Core ) ext4 auth_mechanisms = plain login disable_plaintext_auth = no mail_location = mbox:/var/mail/:INBOX=/var/mail/%u mbox_write_locks = fcntl namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { driver = shadow } protocols = pop3 service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } } ssl_cert = </etc/pki/tls/certs/watchetwebdesign.co.uk.crt ssl_key = </etc/pki/tls/private/watchetwebdesign.co.uk.key userdb { driver = passwd }

2 1

[Dovecot] Doveadm sometimes failed "to iterate through some users" after upgrade to 2.2
by Alessio Cecchi 04 May '21

04 May '21

Hi, I'm running every week in cron "doveadm expunge -A mailbox Spam before 30d" and monthly "doveadm quota recalc -A". After the upgrade to dovecot 2.2.12 (from 2.1.17), "doveadm -A" sometimes exit with this error: doveadm(user(a)domain.com): Error: User listing returned failure doveadm: Error: Failed to iterate through some users # echo $? 75 If I re-run the same command the user where doveadm stops changeing (always in alphabetical order): info@ mario@ pippo@ zazza@ and finally, after 3 or 4 run, ends with success. I have enable debug (via doveadm -D and auth/mail debub in 10-logging.con) but there are no errors or difference in the log when doveadm exit with the error (error code is 75). If I run # doveadm expunge -A mailbox Spam savedbefore 30d doveadm works fine Can somebody help me? Here is my configuration: # dovecot -n # 2.2.12: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.9 auth_debug = yes auth_master_user_separator = * auth_verbose = yes deliver_log_format = msgid=%m, from=%f, subject="%s": %$ dict { expire = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext sqlquota = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext } disable_plaintext_auth = no dotlock_use_excl = no first_valid_gid = 89 first_valid_uid = 89 imap_client_workarounds = delay-newmail tb-extra-mailbox-sep tb-lsub-flags imap_idle_notify_interval = 29 mins imap_logout_format = in=%i out=%o session=<%{session}> last_valid_gid = 89 last_valid_uid = 89 lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes listen = * mail_debug = yes mail_fsync = always mail_location = maildir:~/Maildir mail_nfs_index = yes mail_nfs_storage = yes mail_plugins = quota expire maildir_very_dirty_syncs = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave vnd.dovecot.duplicate mmap_disable = yes namespace { list = children location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u prefix = shared/%%n/ separator = / subscriptions = no type = shared } namespace inbox { inbox = yes location = mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Sent { auto = subscribe special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Spam { auto = subscribe special_use = \Junk } mailbox Trash { auto = subscribe special_use = \Trash } prefix = separator = / } passdb { args = username_format=%Ld /etc/dovecot/extra/alias-domains-denylogin.txt deny = yes driver = passwd-file } passdb { args = /etc/dovecot/extra/master-users driver = passwd-file master = yes pass = yes } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { expire = Trash expire2 = Spam expire_dict = proxy::expire quota = maildir:UserQuota quota2 = dict:Quota Usage::noenforcing:proxy::sqlquota quota_grace = 10M quota_rule2 = Trash:storage=+100M quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u sieve = ~/.dovecot.sieve sieve_before = /etc/dovecot/sieve/before.sieve sieve_dir = ~/sieve sieve_extensions = +vnd.dovecot.duplicate -vacation } pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s, bytes=%i/%o, session=<%{session}> protocols = imap pop3 sieve service auth-worker { process_limit = 1000 } service auth { client_limit = 5500 unix_listener auth-userdb { group = vchkpw mode = 0660 user = vpopmail } } service dict { process_limit = 300 unix_listener dict { group = vchkpw mode = 0660 user = vpopmail } } service imap-login { process_min_avail = 4 service_count = 0 } service imap { process_limit = 4000 service_count = 100 } service managesieve-login { inet_listener sieve { port = 4190 } } service pop3-login { service_count = 0 } service pop3 { process_limit = 1023 service_count = 100 } service quota-warning { executable = script /etc/dovecot/scripts/quota-warning.sh unix_listener quota-warning { user = vpopmail } user = vpopmail } ssl_cert = </etc/dovecot/ssl/wildcard-myemail.net.pem ssl_key = </etc/dovecot/ssl/wildcard-myemail.net.key submission_host = localhost userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol lda { mail_location = maildir:~/Maildir:INDEX=MEMORY mail_plugins = quota expire sieve } protocol imap { mail_max_userip_connections = 15 mail_plugins = quota expire imap_quota } protocol sieve { mail_max_userip_connections = 2 } protocol pop3 { mail_max_userip_connections = 5 } -- Alessio Cecchi is: @ ILS -> http://www.linux.it/~alessice/ on LinkedIn -> http://www.linkedin.com/in/alessice Assistenza Sistemi GNU/Linux -> http://www.cecchi.biz Cloud Email Hosting -> http://www.qboxmail.com @ PLUG -> ex-Presidente, adesso senatore a vita, http://www.prato.linux.it

3 3

imap doesn't like my passwd
by James 31 Jul '20

31 Jul '20

I spent days on this problem. I have dovecot setup to use SSL and IMAP. I also have a pop account that I had no trouble getting working. Both use PAM authentication on Linux. openssl s_client -connect localhost:993 a login test_user test_secure_password The response I got back was: a BAD Invalid characters in atom I changed the password to "abc" and it worked. The secure password used to work but it was a different architecture (x86_64 I think). The current architecture is armhf. It may be different versions of the software too. Dovecot v2.1.7

5 7

[Dovecot] Postfixadmin/MySQL/Dovecot 2 and quota
by Matt 01 Apr '20

01 Apr '20

Hi all, I'm setting up a new email server based on the softwares list below: * Postfix * Dovecot 2.0.9 * MySQL * Postfixadmin 2.3.6 My current problem is I'm unsure whether quota feature is well configured or not. In order to test and validate, I use Roundcubemail GUI which provides percentage of the space used by the mailbox (quota should be applied per mailbox). Here, my dovecot configuration: dovecot.conf: dict { quotadict = mysql:/etc/dovecot/dovecot-dict-quota.conf } dovecot-dict-quota.conf: connect = host=localhost dbname=postfix user=postfix password=postfix map { pattern = priv/quota/storage table = quota2 username_field = username value_field = bytes } map { pattern = priv/quota/messages table = quota2 username_field = username value_field = messages } dovecot-sql.conf.ext: driver = mysql connect = host=localhost dbname=postfix user=postfix password=postfix default_pass_scheme = PLAIN-MD5 password_query = SELECT username AS user, password, \ CONCAT('*:storage=', CAST(quota AS CHAR), 'b') AS quota_rule \ FROM mailbox WHERE username = '%u' AND active='1' user_query = SELECT maildir, 89 AS uid, 12 AS gid, \ concat('dict:storage=',floor(quota/1000),'::proxy::quotadict') AS quota, \ CONCAT('*:storage=', CAST(quota AS CHAR), 'b') AS quota_rule \ FROM mailbox WHERE username = '%u' AND active='1' conf.d/90-quota.conf: plugin { quota = dict:user::proxy::quotadict quota_rule2 = Trash:storage=+10%% } conf.d/20-imap.conf: protocol imap { mail_plugins = $mail_plugins imap_quota } When I check postfixadmin GUI, I can see that quota in realtime in quota2 table, no problem. But Roundcubemail cannot get this information and shows a unknown quota. If I add this line: quota_rule = *:storage=1G in conf.d/90-quota.conf file, it works, I mean roundcubemail gets and shows information (but not the one stored in db of course). I think I'm close to the right configuration but I need your help to complete this setup. Thank you in advance for your help. Best, Matt

7 20

intermittant passdb error
by NeuralNET 23 Jan '20

23 Jan '20

I'm having great difficulty debugging this problem.. I'm having intermittant problems connecting to dovecot. This started a couple of days ago following an apt-get update on the server. I'm running Ubuntu 14.04, dovecot 2.2.9. Here's my dovecot -n --- # 2.2.9: /etc/dovecot/dovecot.conf # OS: Linux 3.19.0-59-generic x86_64 Ubuntu 14.04.4 LTS auth_mechanisms = plain login mail_location = maildir:~/Maildir namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { driver = pam } plugin { sieve_dir = ~/sieve } protocols = imap service auth { unix_listener /var/spool/postfix/private/auth { mode = 0666 } user = $default_internal_user } ssl = required ssl_cert = </etc/dovecot/box.neuralnet.org.uk_crt.pem ssl_key = </etc/dovecot/box.neuralnet.org.uk_key.pem ssl_protocols = !SSLv2 !SSLv3 userdb { driver = passwd } --- Pretty standard stuff. In addition disable_plaintext_auth = yes is set in 10-auth.conf This showed up in the mail.err after the reboot; --- May 17 09:04:51 server dovecot: imap-login: Error: read(anvil) failed: EOF May 17 09:04:51 server dovecot: auth: Error: read(anvil-auth-penalty) failed: EOF May 17 09:04:51 server dovecot: auth: Error: net_connect_unix(anvil-auth-penalty) failed: Permission denied --- At that point The following commands were run on the server a few minutes apart with no changes made in the interim; --- username@box /etc/dovecot $ doveadm user username field valueuserdb lookup: user username doesn't exist username@box /etc/dovecot $ doveadm user username field value uid 1000 gid 1000 home /home/username mail maildir:~/Maildir system_groups_user username --- so, passdb wasn't accessible, but now it is ? Imap logins are showing in mail.log as failing, but thunderbird is currently connected; --- May 18 12:00:58 box dovecot: imap-login: Disconnected (auth failed, 3 attempts in 19 secs): user=<username>, method=PLAIN, rip=10.0.0.3, lip=10.0.0.99, TLS, session=<********> May 18 12:08:27 box dovecot: imap-login: Disconnected (auth failed, 3 attempts in 20 secs): user=<username>, method=PLAIN, rip=10.0.0.3, lip=10.0.0.99, TLS, session=<********> May 18 12:08:50 box dovecot: imap-login: Disconnected (auth failed, 3 attempts in 12 secs): user=<username>, method=PLAIN, rip=10.0.0.3, lip=10.0.0.99, TLS, session=<********> --- do I conclude that method=plain is failing, whereas method=login succeeds ? I tried setting auth_debug_password=yes and get the following; --- May 18 12:26:42 box dovecot: auth: Debug: client in: CONT#0111#011A********== (previous base64 data may contain sensitive data) May 18 12:26:42 box dovecot: auth-worker(12214): Debug: Loading modules from directory: /usr/lib/dovecot/modules/auth May 18 12:26:42 box dovecot: auth-worker(12214): Debug: pam(expert,10.0.0.3): lookup service=dovecot May 18 12:26:42 box dovecot: auth-worker(12214): Debug: pam(expert,10.0.0.3): #1/1 style=1 msg=Password: May 18 12:26:42 box dovecot: auth-worker(12211): pam(username,10.0.0.3): pam_authenticate() failed: Authentication failure (password mismatch?) (given password: ******) May 18 12:26:44 box dovecot: auth: Debug: client passdb out: FAIL#0112#011user=username --- Any assistance debugging this further is greatly recieved! Thanks.

2 2

CentOS x64 compilation fails.
by Mart Pirita 16 Dec '19

16 Dec '19

Hello. I have problems to compile Dovecot2.2.13 with rpmbuild using options: ./configure \ --prefix=/usr \ --with-ssl=openssl \ --with-ssldir=/etc/ssl \ --sysconfdir=/etc \ --without-vpopmail \ --with-pam \ --without-bsdauth \ --without-sql \ --without-nss \ --without-ldap \ --without-pgsql \ --without-mysql \ --without-sqlite \ --with-rundir=/var/run/dovecot \ --without-deliver \ --without-gssapi make Using CentOS 5.11, option - rpmbuild -ba dovecot2.2.spec fails with error: /bin/mkdir -p '/var/tmp/dovecot-2.2.13-mp-root/usr/lib64/dovecot' /bin/sh ../../libtool --mode=install /usr/bin/install -c libdovecot-storage.la '/var/tmp/dovecot-2.2.13-mp-root/usr/lib64/dovecot' libtool: install: error: cannot install `libdovecot-storage.la' to a directory not ending in /usr/lib/dovecot make[4]: *** [install-pkglibLTLIBRARIES] Error 1 make[4]: Leaving directory `/usr/src/redhat/BUILD/dovecot-2.2.13/src/lib-storage' make[3]: *** [install-am] Error 2 make[3]: Leaving directory `/usr/src/redhat/BUILD/dovecot-2.2.13/src/lib-storage' make[2]: *** [install-recursive] Error 1 make[2]: Leaving directory `/usr/src/redhat/BUILD/dovecot-2.2.13/src/lib-storage' make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory `/usr/src/redhat/BUILD/dovecot-2.2.13/src' make: *** [install-recursive] Error 1 error: Bad exit status from /var/tmp/rpm-tmp.14076 (%install) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.14076 (%install) But using CentOS 5.11with option- rpmbuild --target=i686 -ba dovecot2.2.spec works fine. However, using CentOS 6.5, with option - rpmbuild -ba dovecot2.2.spec fails with error: /bin/mkdir -p '/root/rpmbuild/BUILDROOT/dovecot-2.2.13-mp.x86_64/usr/lib64/dovecot' /bin/sh ../../libtool --mode=install /usr/bin/install -c libdovecot-storage.la '/root/rpmbuild/BUILDROOT/dovecot-2.2.13-mp.x86_64/usr/lib64/dovecot' libtool: install: error: cannot install `libdovecot-storage.la' to a directory not ending in /usr/lib/dovecot make[4]: *** [install-pkglibLTLIBRARIES] Error 1 make[4]: Leaving directory `/root/rpmbuild/BUILD/dovecot-2.2.13/src/lib-storage' make[3]: *** [install-am] Error 2 make[3]: Leaving directory `/root/rpmbuild/BUILD/dovecot-2.2.13/src/lib-storage' make[2]: *** [install-recursive] Error 1 make[2]: Leaving directory `/root/rpmbuild/BUILD/dovecot-2.2.13/src/lib-storage' make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory `/root/rpmbuild/BUILD/dovecot-2.2.13/src' make: *** [install-recursive] Error 1 error: Bad exit status from /var/tmp/rpm-tmp.HP3meN (%install) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.HP3meN (%install) But when CentOS 5.11with option rpmbuild --target=i686 -ba dovecot2.2.spec suceeds, CentOS 6.5still fails: cpio: dovecot-2.2.13/src/lib-compression/abspath.c: Cannot stat: No such file or directory cpio: dovecot-2.2.13/src/lib-compression/compat.h: Cannot stat: No such file or directory cpio: dovecot-2.2.13/src/lib-compression/lib.h: Cannot stat: No such file or directory 18096 blocks + /usr/lib/rpm/check-buildroot /root/rpmbuild/BUILDROOT/dovecot-2.2.13-mp.i386/usr/lib/dovecot/dovecot-config:LIBDOVECOT='-L/root/rpmbuild/BUILDROOT/dovecot-2.2.13-mp.i386/usr/lib/dovecot -ldovecot' /root/rpmbuild/BUILDROOT/dovecot-2.2.13-mp.i386/usr/lib/dovecot/dovecot-config:LIBDOVECOT_INCLUDE=-I/root/rpmbuild/BUILDROOT/dovecot-2.2.13-mp.i386/usr/include/dovecot Found '/root/rpmbuild/BUILDROOT/dovecot-2.2.13-mp.i386' in installed files; aborting error: Bad exit status from /var/tmp/rpm-tmp.69mGY0 (%install) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.69mGY0 (%install) How to fix these errors? -- Mart

5 8

Supporting RFC 5466 (IMAP4 Extension for Named Searches (Filters))
by Jesus Cea 06 Dec '19

06 Dec '19

I wonder if Dovecot supports RFC 5466 (IMAP4 Extension for Named Searches (Filters)) or if there is any plan about it. -- Jesús Cea Avión _/_/ _/_/_/ _/_/_/ jcea(a)jcea.es - http://www.jcea.es/ _/_/ _/_/ _/_/ _/_/ _/_/ Twitter: @jcea _/_/ _/_/ _/_/_/_/_/ jabber / xmpp:jcea@jabber.org _/_/ _/_/ _/_/ _/_/ _/_/ "Things are not so easy" _/_/ _/_/ _/_/ _/_/ _/_/ _/_/ "My name is Dump, Core Dump" _/_/_/ _/_/_/ _/_/ _/_/ "El amor es poner tu felicidad en la felicidad de otro" - Leibniz

4 6

pigeonhole/lda accessing -m folder
by matthias lay 12 Sep '19

12 Sep '19

Hi all, anybody knows, if there is a way to acces the folder from a call like this deovecot-lda -m destfolder from within a sieve script? thx in advance matze

5 9

JMAP support in Dovecot
by Andrew Jones 29 May '19

29 May '19

Hi there, I understand there were discussions to try and develop JMAP support for Dovecot. Is this still in the pipeline for Dovecot 2.5? Regards Andrew Sent from my iPhone

10 18