- dovecot - dovecot.org

[Dovecot] disconnected errors
by Tom Allison 15 Jun '04

15 Jun '04

Jun 14 07:35:20 cling imap-login: Login: tallison [192.168.1.10] Jun 14 07:35:21 cling dovecot: child 17755 (imap) killed with signal 11 --- I run into this when I try to enter one folder. The rest are fine.

3 3

[Dovecot] Default domain ?
by Marius Stan 15 Jun '04

15 Jun '04

Hello, I'm in the process of migrating from qpopper to dovecot and I've stumbled upon the least expected thing: In qpopper I can specify a 'default domain', which will be used if an user will only issue his username (not the whole email address) when logging in. Because of this, the users in my main domain don't use the whole email address when getting their mail. I'd hate to have to call each of them and guide through their OE menus to fix this issue, so I must ask: Is there any way at all of specifying a default domain in dovecot ? Thanks, Marius

3 2

[Dovecot] vpopmail and open smtp relay
by Chernomorets Sergey 15 Jun '04

15 Jun '04

I'm using vpopmail's POP-before-SMTP auth, but dovecot don't support it, so I'm wrote this patch ============================================================== diff -Naur dovecot-0.99.10.5/src/auth/auth-login-interface.h dovecot-0.99.10.5-patched/src/auth/auth-login-interface.h --- dovecot-0.99.10.5/src/auth/auth-login-interface.h Sun May 18 16:26:28 2003 +++ dovecot-0.99.10.5-patched/src/auth/auth-login-interface.h Mon Jun 14 13:18:15 2004 @@ -1,6 +1,10 @@ #ifndef __AUTH_LOGIN_INTERFACE_H #define __AUTH_LOGIN_INTERFACE_H +#ifdef PASSDB_VPOPMAIL +#include "network.h" +#endif + /* max. size for auth_login_request_continue.data[] */ #define AUTH_LOGIN_MAX_REQUEST_DATA_SIZE 4096 @@ -50,6 +54,10 @@ enum auth_mech mech; enum auth_protocol protocol; + +#ifdef PASSDB_VPOPMAIL + struct ip_addr client_ip; +#endif }; /* Continue authentication request */ diff -Naur dovecot-0.99.10.5/src/auth/mech.c dovecot-0.99.10.5-patched/src/auth/mech.c --- dovecot-0.99.10.5/src/auth/mech.c Sun May 18 16:26:28 2003 +++ dovecot-0.99.10.5-patched/src/auth/mech.c Mon Jun 14 13:27:33 2004 @@ -98,7 +98,10 @@ auth_request->conn = conn; auth_request->id = request->id; auth_request->protocol = request->protocol; - +#ifdef PASSDB_VPOPMAIL + auth_request->client_ip = request->client_ip; +#endif + hash_insert(conn->auth_requests, POINTER_CAST(request->id), auth_request); } diff -Naur dovecot-0.99.10.5/src/auth/mech.h dovecot-0.99.10.5-patched/src/auth/mech.h --- dovecot-0.99.10.5/src/auth/mech.h Sun May 18 16:26:28 2003 +++ dovecot-0.99.10.5-patched/src/auth/mech.h Mon Jun 14 13:26:29 2004 @@ -19,6 +19,10 @@ enum auth_protocol protocol; mech_callback_t *callback; +#ifdef PASSDB_VPOPMAIL + struct ip_addr client_ip; +#endif + int (*auth_continue)(struct auth_request *auth_request, struct auth_login_request_continue *request, const unsigned char *data, diff -Naur dovecot-0.99.10.5/src/auth/passdb-vpopmail.c dovecot-0.99.10.5-patched/src/auth/passdb-vpopmail.c --- dovecot-0.99.10.5/src/auth/passdb-vpopmail.c Thu Feb 20 03:46:51 2003 +++ dovecot-0.99.10.5-patched/src/auth/passdb-vpopmail.c Mon Jun 14 13:29:49 2004 @@ -14,6 +14,8 @@ #include "userdb-vpopmail.h" +#include "env-util.h" + static void vpopmail_verify_plain(struct auth_request *request, const char *password, verify_plain_callback_t *callback) @@ -21,6 +23,7 @@ char vpop_user[VPOPMAIL_LIMIT], vpop_domain[VPOPMAIL_LIMIT]; struct vqpasswd *vpw; int result; + const char *ip_addr_fe; vpw = vpopmail_lookup_vqp(request->user, vpop_user, vpop_domain); @@ -57,6 +60,15 @@ return; } + /* it is needed for open smtp relay */ + + ip_addr_fe = net_ip2addr(&request->client_ip); + if (ip_addr_fe == NULL) + ip_addr_fe = "??"; + + env_put(t_strconcat("TCPREMOTEIP=", ip_addr_fe, NULL)); + open_smtp_relay(); + callback(PASSDB_RESULT_OK, request); } diff -Naur dovecot-0.99.10.5/src/login-common/auth-connection.c dovecot-0.99.10.5-patched/src/login-common/auth-connection.c --- dovecot-0.99.10.5/src/login-common/auth-connection.c Mon May 26 19:27:13 2003 +++ dovecot-0.99.10.5-patched/src/login-common/auth-connection.c Mon Jun 14 13:21:22 2004 @@ -298,6 +298,9 @@ struct auth_connection *conn; struct auth_request *request; struct auth_login_request_new auth_request; +#ifdef PASSDB_VPOPMAIL + struct client *_client = context; +#endif if (auth_reconnect) auth_connect_missing(); @@ -325,6 +328,9 @@ auth_request.protocol = protocol; auth_request.mech = request->mech; auth_request.id = request->id; +#ifdef PASSDB_VPOPMAIL + auth_request.client_ip = _client->ip; +#endif if (o_stream_send(request->conn->output, &auth_request, sizeof(auth_request)) < 0) { errno = request->conn->output->stream_errno;

2 1

[Dovecot] Wishlist item, POP3 welcome message
by Christian Balzer 15 Jun '04

15 Jun '04

Hello, With qpopper you get something like this after a successful login: --- +OK test has 6 visible messages (0 hidden) in 11822 octets. --- This gives a clueful user or support people a quick status about the size of this mailbox, very helpful in full quota scenarios. Would be nice if the next dovecot would have such a feature as well. I doubt the same is (easily) applicable for IMAP (though would be trivial once maildirsize is supported). Another thing would be PIPELINING for POP3, but I doubt it's all that helpful in this day and age of bountiful broadband. Regards, Christian Balzer -- Christian Balzer Network/Systems Engineer NOC chibi(a)gol.com Global OnLine Japan/Fusion Network Services http://www.gol.com/

3 3

RE: [Dovecot] dovecot + Fedora core 1
by Villalovos, John L 15 Jun '04

15 Jun '04

dovecot-bounces(a)dovecot.org wrote: > Hi, > > I've installed dovecot-0.99.10.5 using the rpm from Dag Wieers, > but when I start it all I get is nothing (but none of the processes > are running). > > I checked the config file and set it up (I'm trying to use it > with mysql support, but it doesn't work with traditional config) Did you look at the output of /var/log/messages? John

2 1

[Dovecot] breakin' dovecot
by Tom Allison 14 Jun '04

14 Jun '04

I know this is cruel, but I figured out a way to break dovecot, temporarily. The really great news is that it recovers nicely. I'm also not sure if anything can be done about this, since I've seen the same thing happen with courier-imap, uw-imap, and maybe cyrus-imap. I used cyrus-imap for such a short period of time that I didn't get to really test it much. how to... (this was done on a fast ethernet network) get a folder with some 1,000+ unread/unseen emails. pop in with mozilla mail and wait for it to download all the mail information from ther server. press and hold the delete key. After about 300 emails being deleted, the imap server will appear to "freeze" and the "M" will keep cycling as if it's doing something. This will not recover until I move off the directory and return to it. hold delete key and repeat. If you do anything less than holding it down, it probably won't fail. It's a timing issue. I'm really not sure if it's even worth looking at. I'm not trying to identify this as a bug/defect/anything. But when I get a new piece of software I am really interested in what it does when it chokes. An old boss of mine would take my user applications and test them my rolling his hands across the keyboard for about a minute and if it hadn't crashed or entered bad data, it was a success. Please note that when I did this under courier-imap, it would stop refreshing itself from any/all directories until I logged out ( quit mozillia ) and logged back in again. So I would consider this to be a vast improvement in that regard. I should check what it logs when this happens, my guess is...nothing because it's frozen.

3 3

[Dovecot] Fedora dovecot Testing Needed
by Warren Togami 12 Jun '04

12 Jun '04

http://people.redhat.com/wtogami/temp/dovecot/ dovecot-0.99.10.5 binary packages for FC1 and FC2 are available here. I need feedback from Fedora users with THESE ACTUAL BINARIES before pushing them to official updates. Note: This does not solve the SSL related crash issue. That requires a patch to OpenSSL or kernel. I am still trying to convince the maintainers to patch it. Warren Togami wtogami(a)redhat.com

4 5

[Dovecot] folders via softlink
by Chris Barnes 12 Jun '04

12 Jun '04

I have recently switched from the UW imap server to dovecot and things seem to be working nicely. One thing that I can't seem to figure out however, is how to get dovecot to show folders that are a softlink. We run SpamAssassin. Users can use both their own personal spam folder as well as a shared spam folder. For messages that everyone would consider spam, the user can simply drag the message to the shared spam folder (messages that are only "spam to them" would go into their own spam folder). sa-learn is then run nightly for each user against both the shared spam folder and their personal spam folder. The shared spam folder is simply a file that everyone has rwx access to and is softlinked to ~/mail/SharedSpam. This used to work fine with UW imap because it didn't seem to care that this was a softlink. However, apparently Dovecot DOES care because when the user resets their folder list and the user selects the folder and chooses "show", they get the error message: Could not show "SharedSpam". The server refused to show it. The folder might already be shown. I have tried editing the .subscriptions file by hand and it does cause the folder to show up, but when the user trys to use it, they get the same error. Is there a setting somewhere I'm missing? -- + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Chris Barnes AOL IM: CNBarnes chris-barnes(a)tamu.edu Yahoo IM: chrisnbarnes Computer Systems Manager ph: 979-845-7801 Department of Physics fax: 979-845-2590 Texas A&M University

6 8

[Dovecot] some messages showing up twice
by alan premselaar 12 Jun '04

12 Jun '04

I've recently installed dovecot 0.99.10.5 on a redhat 7.3 machine. Everything seems to be running fine and smoothly for the most part, however in the past few days I've seen a couple of duplicate emails (and so have a few of my users) which don't appear to have been processed twice by sendmail. also, on one of my IMAP sub-folders my mail client (mozilla thunderbird version 0.6+ (20040610) nightly) reported 1 unread email, but it didn't show up in the list. it appears that the index for that subfolder got corrupted (i moved all the .index* files to a backup directory and when i checked that folder, it recreated the index files and then showed me the one unread email) I realize that i'm using a nightly build of a beta mail client, but some of my users reporting similar troubles are using Mail.app and other clients. does anybody have any suggestions as to what I might do to get some useful debug info and/or find the cause of this problem? thanks, alan

1 0

[Dovecot] 'append aborted'
by Tom Allison 12 Jun '04

12 Jun '04

I'm copying all my archives from one imap server on one machine to the imap-ssl dovecot server on another machine. After a bit, there's an error that's tossed up on my mozilla client that says the imap server couldn't complete the operation with the message append aborted. It keeps popping up after anything from 50 to 300 emails. Last night I was able to move ~12000 emails from one machine to the other without the ssl enabled. Any hints on what to look for?

3 6

RE: [Dovecot] tcp wrappers?
by Villalovos, John L 12 Jun '04

12 Jun '04

dovecot-bounces(a)dovecot.org wrote: > How can I secure dovecot listening on port 143 to specific machines > only? > > Squirrelmail suggests using non-ssl if the imap daemon > is on the same host... > > Otherwise squirrelmail could use TLS but what about other > clients wanting to use SSL on port 993? (sorry I don't know enough > about TLS). I use iptables so that only 127.0.0.1 can access IMAP. Everyone else has to use IMAPS. John

1 0

[Dovecot] IMSP server that works with Dovecot
by Mark Williamson 11 Jun '04

11 Jun '04

Hi All, Is there a IMSP server that can work with Dovecot, or would I have to change to Cyrus Imap server to have a server component that will integrate. Cheers Mark

3 2

[Dovecot] tcp wrappers?
by Roman Bogoyev 11 Jun '04

11 Jun '04

How can I secure dovecot listening on port 143 to specific machines only? Squirrelmail suggests using non-ssl if the imap daemon is on the same host... Otherwise squirrelmail could use TLS but what about other clients wanting to use SSL on port 993? (sorry I don't know enough about TLS). Thanks, Roman. -- ______________________________________________________________________ Roman Bogoyev, I.T. Manager School of Mathematics and Statistics email: roman(a)maths.uwa.edu.au University of Western Australia tel: +61 8 6488 3379 35 Stirling Hwy, Crawley 6009 fax: +61 8 6488 1028 Western Australia

2 1

RE: [Dovecot] Can't open configuration file
by Nico De Beer - MWEB 11 Jun '04

11 Jun '04

here is the full error output as in my log file dovecot-auth: "Jun 11 14:48:42 "Fatal: Can't open configuration file /home/dovecot/dovecot-pgsql.conf: Permission denied dovecot: "Jun 11 14:48:42 "Error: Auth process died too early - shutting down dovecot: "Jun 11 14:48:42 "Error: child 9341 (auth) returned error 89 imap-login: "Jun 11 14:48:42 "Fatal: fd_send(-1) failed: Broken pipe pop3-login: "Jun 11 14:48:42 "Fatal: fd_send(-1) failed: Broken pipe -----Original Message----- From: Brian Candler [mailto:B.Candler@pobox.com] Sent: 11 June 2004 02:34 To: Nico De Beer - MWEB Cc: dovecot(a)dovecot.org Subject: Re: [Dovecot] Can't open configuration file On Fri, Jun 11, 2004 at 02:21:45PM +0200, Nico De Beer - MWEB wrote: > Let me give a bit more infor > > Originaly i had it in /usr/local/etc > and moved it to home/dovcot so i can give fulle access in a pah where there is not other info residing > > So i'm thinking it is something i specified in my config file > or a mistake i did during compiling OK, to avoid ambiguity, can you show the output of: # ls -ld / /home /home/dovecot /home/dovecot/dovecot-pgsql.conf Then check you get the same log error as before. Brian. Are you ready for Telkom's 10-digit dialling? To find out how this will affect your Internet connection in the not too distant future, go to www.mweb.co.za/ten

2 1

RE: [Dovecot] Can't open configuration file
by Nico De Beer - MWEB 11 Jun '04

11 Jun '04

builind the rpm worked great still don't know what it was though ***************8 -----Original Message----- From: Brian Candler [mailto:B.Candler@pobox.com] Sent: 11 June 2004 03:23 To: Nico De Beer - MWEB Cc: dovecot(a)dovecot.org Subject: Re: [Dovecot] Can't open configuration file On Fri, Jun 11, 2004 at 02:40:14PM +0200, Nico De Beer - MWEB wrote: > drwxr-xr-x 24 root root 4096 Jun 11 14:29 / > drwxr-xr-x 6 root root 4096 Jun 11 12:47 /home > drwxr-xr-x 2 dovecot dovecot 4096 Jun 11 13:08 /home/dovecot > -rwxrwxrwx 1 dovecot dovecot 2656 Jun 11 13:08 /home/dovecot/dovecot-pgsql.conf > > this what you wanted Yep. I am stumped as to why open(path, O_RDONLY) fails on that with EACCES, as it appears to be doing. 'cat /home/dovecot/dovecot-pgsql.conf' works, I presume? Brian. Are you ready for Telkom's 10-digit dialling? To find out how this will affect your Internet connection in the not too distant future, go to www.mweb.co.za/ten

1 0

RE: [Dovecot] Fatal: Unknown userdb type 'pgsql'
by Nico De Beer - MWEB 11 Jun '04

11 Jun '04

I R Stupid I can just unzip edit the spec file and atr zip again go figure -----Original Message----- From: Nico De Beer - MWEB [mailto:NDeBeer@mweb.com] Sent: 11 June 2004 05:46 To: dovecot(a)dovecot.org Subject: [Dovecot] Fatal: Unknown userdb type 'pgsql' i build an rpm and now gets this i builed the rpm with rpmbuild -ta --define 'XFlags --with-mysql --with-pgsql --with-pop3' dovecot-0.99.10.5.tar.gz Are you ready for Telkom's 10-digit area code dialling? To find out how this will affect your M-Web connection in the not too distant future, click here <http://www.mweb.co.za/ten> . M-Web JUST LIKE THAT

1 0

[Dovecot] Fatal: Unknown userdb type 'pgsql'
by Nico De Beer - MWEB 11 Jun '04

11 Jun '04

i build an rpm and now gets this i builed the rpm with rpmbuild -ta --define 'XFlags --with-mysql --with-pgsql --with-pop3' dovecot-0.99.10.5.tar.gz Are you ready for Telkom's 10-digit dialling? To find out how this will affect your Internet connection in the not too distant future, go to www.mweb.co.za/ten

1 0

RE: [Dovecot] Can't open configuration file
by Nico De Beer - MWEB 11 Jun '04

11 Jun '04

cat works i see when building an rpm from tar.gz it req gettextopenssl-devel and pam-devel i did not compile with these during atr gz but can't see that it makes a diffrence so i'll try via rpm once the packages is installed -----Original Message----- From: Brian Candler [mailto:B.Candler@pobox.com] Sent: 11 June 2004 03:23 To: Nico De Beer - MWEB Cc: dovecot(a)dovecot.org Subject: Re: [Dovecot] Can't open configuration file On Fri, Jun 11, 2004 at 02:40:14PM +0200, Nico De Beer - MWEB wrote: > drwxr-xr-x 24 root root 4096 Jun 11 14:29 / > drwxr-xr-x 6 root root 4096 Jun 11 12:47 /home > drwxr-xr-x 2 dovecot dovecot 4096 Jun 11 13:08 /home/dovecot > -rwxrwxrwx 1 dovecot dovecot 2656 Jun 11 13:08 /home/dovecot/dovecot-pgsql.conf > > this what you wanted Yep. I am stumped as to why open(path, O_RDONLY) fails on that with EACCES, as it appears to be doing. 'cat /home/dovecot/dovecot-pgsql.conf' works, I presume? Brian. Are you ready for Telkom's 10-digit dialling? To find out how this will affect your Internet connection in the not too distant future, go to www.mweb.co.za/ten

1 0

RE: [Dovecot] Can't open configuration file
by Nico De Beer - MWEB 11 Jun '04

11 Jun '04

drwxr-xr-x 24 root root 4096 Jun 11 14:29 / drwxr-xr-x 6 root root 4096 Jun 11 12:47 /home drwxr-xr-x 2 dovecot dovecot 4096 Jun 11 13:08 /home/dovecot -rwxrwxrwx 1 dovecot dovecot 2656 Jun 11 13:08 /home/dovecot/dovecot-pgsql.conf this what you wanted -----Original Message----- From: Brian Candler [mailto:B.Candler@pobox.com] Sent: 11 June 2004 02:34 To: Nico De Beer - MWEB Cc: dovecot(a)dovecot.org Subject: Re: [Dovecot] Can't open configuration file On Fri, Jun 11, 2004 at 02:21:45PM +0200, Nico De Beer - MWEB wrote: > Let me give a bit more infor > > Originaly i had it in /usr/local/etc > and moved it to home/dovcot so i can give fulle access in a pah where there is not other info residing > > So i'm thinking it is something i specified in my config file > or a mistake i did during compiling OK, to avoid ambiguity, can you show the output of: # ls -ld / /home /home/dovecot /home/dovecot/dovecot-pgsql.conf Then check you get the same log error as before. Brian. Are you ready for Telkom's 10-digit dialling? To find out how this will affect your Internet connection in the not too distant future, go to www.mweb.co.za/ten

2 1

RE: [Dovecot] Can't open configuration file
by Nico De Beer - MWEB 11 Jun '04

11 Jun '04

the error originates in the source C file setting.c as fd = open(path, O_RDONLY); - if (fd < 0) - i_fatal("Can't open configuration file %s: %m", path); + if (fd < 0) { + i_error("Can't open configuration file %s: %m", path); + return FALSE; + } so it is posible that i don't have a lib or header file that is required I did not get any errors on install doning a tar.gz install on Fedora core2 minimal install -----Original Message----- From: Nico De Beer - MWEB [mailto:NDeBeer@mweb.com] Sent: 11 June 2004 02:40 To: Brian Candler Cc: dovecot(a)dovecot.org Subject: RE: [Dovecot] Can't open configuration file drwxr-xr-x 24 root root 4096 Jun 11 14:29 / drwxr-xr-x 6 root root 4096 Jun 11 12:47 /home drwxr-xr-x 2 dovecot dovecot 4096 Jun 11 13:08 /home/dovecot -rwxrwxrwx 1 dovecot dovecot 2656 Jun 11 13:08 /home/dovecot/dovecot-pgsql.conf this what you wanted -----Original Message----- From: Brian Candler [mailto:B.Candler@pobox.com] Sent: 11 June 2004 02:34 To: Nico De Beer - MWEB Cc: dovecot(a)dovecot.org Subject: Re: [Dovecot] Can't open configuration file On Fri, Jun 11, 2004 at 02:21:45PM +0200, Nico De Beer - MWEB wrote: > Let me give a bit more infor > > Originaly i had it in /usr/local/etc > and moved it to home/dovcot so i can give fulle access in a pah where there is not other info residing > > So i'm thinking it is something i specified in my config file > or a mistake i did during compiling OK, to avoid ambiguity, can you show the output of: # ls -ld / /home /home/dovecot /home/dovecot/dovecot-pgsql.conf Then check you get the same log error as before. Brian. Are you ready for Telkom's 10-digit dialling? To find out how this will affect your Internet connection in the not too distant future, go to www.mweb.co.za/ten

1 0

RE: [Dovecot] Can't open configuration file
by Nico De Beer - MWEB 11 Jun '04

11 Jun '04

Let me give a bit more infor Originaly i had it in /usr/local/etc and moved it to home/dovcot so i can give fulle access in a pah where there is not other info residing So i'm thinking it is something i specified in my config file or a mistake i did during compiling -----Original Message----- From: Brian Candler [mailto:B.Candler@pobox.com] Sent: 11 June 2004 01:36 To: Nico De Beer - MWEB Cc: dovecot(a)dovecot.org Subject: Re: [Dovecot] Can't open configuration file On Fri, Jun 11, 2004 at 01:22:43PM +0200, Nico De Beer - MWEB wrote: > Jun 11 13:12:46 "Fatal: Can't open configuration file > /home/dovecot/dovecot-pgsql.conf: Permission denied > this file have fulle permissions and has belonged to dovecot and root > but still no joy What about the directory /home/dovecot ? Are you ready for Telkom's 10-digit dialling? To find out how this will affect your Internet connection in the not too distant future, go to www.mweb.co.za/ten

2 1

[Dovecot] Can't open configuration file
by Nico De Beer - MWEB 11 Jun '04

11 Jun '04

Hi I'm getting Jun 11 13:12:46 "Fatal: Can't open configuration file /home/dovecot/dovecot-pgsql.conf: Permission denied this file have fulle permissions and has belonged to dovecot and root but still no joy what am i missing must be something stupid on this side Thanks for the previos comments about scripting I am swithcing to postgress for the mail env and will look at mysql when they support translation Are you ready for Telkom's 10-digit dialling? To find out how this will affect your Internet connection in the not too distant future, go to www.mweb.co.za/ten

2 1

[Dovecot] auth failure
by Tom Allison 11 Jun '04

11 Jun '04

well, with some help I've made a fair amount of progress on my box. It's working out much easier than I had anticipated and perhaps my notes will be useful some day. I have two questions... Here is where I am: cling:~# egrep -v "^($|\#)" /etc/dovecot.conf protocols = imap imaps login = imap login_max_processes_count = 16 login = pop3 max_mail_processes = 512 verbose_proctitle = yes default_mail_env = maildir:~/Maildir mailbox_check_interval = 1 auth = default auth_mechanisms = plain auth_passdb = pgsql /etc/dovecot-pgsql.conf auth_user = root auth_verbose = yes cling:~# egrep -v "^($|\#)" /etc/dovecot-pgsql.conf connect = dbname=dbmail user=dbmail_reader password=SECRET default_pass_scheme = PLAIN-MD5 password_query = SELECT passwd AS password FROM users WHERE userid = '%u' I've created working passwords using 'mkpasswd --hash=md5' and plugged the results into my database. I can login and everything looks pretty cool. Except, as near as I can tell, I'm sending plaintext authentication over the wire. My best guess is that my password gets munged into digest-md5 format before it goes over the wire. At this point I'm of the opinion that I'm reasonably secure. True so far? My guess is that the next step in security is to go for imaps and ssl configuration. But my debian installation doesn't appear to have the dovecot-openssl.cnf file referenced in the configuration.txt file. Is this missing from dovecot or am I looking at a debian problem?

3 4

[Dovecot] Corrupted index file
by Niilo Kajander 11 Jun '04

11 Jun '04

Hi, I've been wondering for a while if reiserfs is dovecot+maildir safe or not. I get this too often (and my imap session gets disconnected): Jun 9 08:42:32 sun imap(nk): Corrupted index file /home/nk/Maildir/.INBOX/.imap .index: UIDVALIDITY changed in uidlist This happens always when a new mail arrives in maildir. It's a Fedora Core 2 box running dovecot-0.99.10.4-4 (redhat) package. Could the reason for these corruptions be something else than reiserfs? I know there has been some problems with Fedora+dovecot but I haven't seen this one reported here. TIA, -- Niilo Kajander <nk(a)kajander.fi>

3 5

[Dovecot] bleah
by Tom Allison 11 Jun '04

11 Jun '04

Not to be a bitch, but I've asked several times about some basic questions or examples to clarify the essentials for configuration. What do some of the parameters mean? Expecially the ones that are mentioned only one in a paragraph and no where else in the documentation or wiki. (ie: login_process_per_use) And there have been a few others as well. that I won't bother to repeat. But I've been sitting on this list for a while yet and have found that when it comes to configuration, none of the emails posted have been answered or addressed. The closest I got was a suggestion to use views instead of tables in postgres. But technically nothing was ever said about dovecot itself. So I have to ask. Is the sketchy documentation in the source file, the web page, wiki, and limited reponse on the mailing list a matter of "I haven't gotten around to it yet" or a deliberate move to promote the commercial support potential for Procontrol? I've run into this kind of environment twice before (cyrus and razor) and in the case of cyrus they just didn't believe in doing the documentation but suggested I write it myself. That may be the case there as well ("I haven't gotten around to it yet". That's OK but cyrus has the difficulty of no one still not providing any answers to how anything was done, configured, functioned, or why. So documentation was kind of a reverse-engineering project in itself. In the case of razor it's a mix of no time and they would rather support the company than the project. I went back and re-read the emails that I had posted earlier and am pretty sure that they weren't too stupid (ie: how do I test an imap connection), difficult, or obscure (well, maybe one). I'm just trying to find more information on how to correctly configure this server such that I can retain the concept of keeping security in mind. I'm trolling through the archives and there doesn't seem to be much discussion from anyone else. So maybe I'm really stupid and can't do authentication schemes. I'm sure by this point I've really pissed a few people off and for that I mostly apologize. I'm a little bent here myself. It just that I didn't plan on having to set up sniffit to track my IMAP traffic in order to verify that things were actually working securely. I'm going to plug along and do it myself and probably get something to work. I have plain_text authentication working now, but was really hoping to actually get something secure. At this point I really don't expect an answer, but do hope that after 1.0 is released there will be time available to get some documentation in order. IMHO the level of documentation that is available on a software project is critical to it's use.

2 2

[Dovecot] pgsql documentation
by Tom Allison 11 Jun '04

11 Jun '04

From dovecot-pgsql.conf # Examples: # connect = host=192.168.1.1 dbname=users # connect = host=sql.example.com dbname=virtual user=virtual There is a reference to identify the rest of the parameters via libpq in the postgres documentation. From postgres, libpq says the connection environment variables are: hostname:port:database:username:password http://www.postgresql.org/docs/7.4/static/libpq-pgpass.html Should the dovecot-pgsql.conf docs be changed from "dbname=users" to "database=users" ??

1 1

[Dovecot] "virgin" mail accounts
by Christian Balzer 11 Jun '04

11 Jun '04

Hello, I'm willing to swear that with the 0.99.10.4 Debian package in my rather extensive tests with mailbox format dovecot created not only any missing parental directories but also the INBOX file, but the later I can't prove/test now as I upgraded all respective boxes. However 0.99.10.5 will still create (if needed and possible) missing directories for mbox storage, just not an empty INBOX. But with maildir, it will not even do that, from a test with pop3 and imap login attempts to a freshly created account that had not received any mails yet: --- Jun 10 12:58:03 mb01 pop3-login: Login: test [203.216.5.92] Jun 10 12:58:03 mb01 pop3: I/O leak: 0x8050ce0 (0) Jun 10 12:58:03 mb01 pop3: I/O leak: 0x8084aa0 (1) Jun 10 12:58:49 mb01 imap-login: Login: ttest [203.216.5.92] Jun 10 12:58:50 mb01 last message repeated 3 times Jun 10 12:58:50 mb01 dovecot: child 9193 (imap) killed with signal 11 --- It died not very graceful in either case, esp. the later. Unless there are very RFC'ish and imperative reasons, I'd suggest that dovecot creates all missing bits if possible no matter what the storage method or pretends to have encountered an empty mbox file or maildir cur/new respectively. The rationale should be obvious, no frantic user calls about "My mail is not working" when the answer is "Duh, that's because you never ever received one yet". ;) Regards, Christian Balzer -- Christian Balzer Network/Systems Engineer NOC chibi(a)gol.com Global OnLine Japan/Fusion Network Services http://www.gol.com/

3 4

[Dovecot] Scripting
by Nico De Beer - MWEB 10 Jun '04

10 Jun '04

You metioned previosely that one can do character translation with postgress with mysql you can also do so but can use it as the table name Is there anyway to write something outside dovecot to do the lookup in say c++ Are you ready for Telkom's 10-digit dialling? To find out how this will affect your Internet connection in the not too distant future, go to www.mweb.co.za/ten

2 1

[Dovecot] 2 problems
by Cor Bosman 10 Jun '04

10 Jun '04

Hi all, im testing dovecot as a replacement imap server and noticed 2 problems in 0.99.10.5. if you use dovecot/pop on an account who's quota is fully used, dovecot will ungracefully stop. This will only happen when the account is first accessed by dovecot (for instance, when offering IMAP to an existing userbase using dovecot, or when the index files have inadvertently been deleted). +OK dovecot ready. user scorpio +OK pass xxxxxxxx +OK Logged in. Connection closed by foreign host. The same goes for imap: * OK dovecot ready. . login "scorpio" "xxxxxxx" . OK Logged in. . select INBOX . NO Out of disk space This is a bit of a problem because one of the remedies of solving an out of disk space problem is deleting email, which you cant now. Cor

2 1

[Dovecot] mbox configuration
by Nina Pham 10 Jun '04

10 Jun '04

Hi, I change the dovecot.conf default_mail_env = mbox:/Mail/IMAP/%u/:INBOX=/var/mail/%u After I did the change, I restart dovecot with the hope that folder that I create will be stored in /Mail/IMAP/%u. Then I use Mozzila as my email client and change the IMAP server directory to ~nina/IMAP/ which is the link to /Mail/IMAP/nina/. But then I can not create folder anymore from Mozzila, or view any thing other than inbox. I am still able to see message in inbox since I haven't change the location of inbox. Please help. Nina

2 1

[Dovecot] authentication configuration
by Tom Allison 10 Jun '04

10 Jun '04

I've included the non-defaulted bits of my dovecot.conf file at the bottom of this email. As I understand my set-up it's using unix authentication methods (/etc/passwd via pam?). Considering disable_plaintext_auth and auth_mechanisms, what exactly is being passed? I was hoping to get auth_mechanism = digest-md5 but that's not working out very well right now. It seems I can only do plaintext authentication. I got stuck on the userdb/auth_passdb settings. Can someone give me an example of how to configure for md5-digest authentication? My current guess is: disable_plaintext_auth = yes auth = digest-md5 auth_mechanism = digest_md5 auth_passdb = /etc/mydigestfile How would I set this for pgsql? auth_passdb = /etc/dovecot-pgsql.conf ### non-default config settings. protocols = imap imaps disable_plaintext_auth = yes login = imap login_max_processes_count = 16 login = pop3 max_mail_processes = 512 default_mail_env = maildir:~/Maildir mailbox_check_interval = 1 auth = default auth_mechanisms = plain auth_passdb = pam auth_user = root

2 1

[Dovecot] configuration
by Tom Allison 10 Jun '04

10 Jun '04

I've noticed that there are some parameters mentioned in the docs that aren't identified therein (ie: login_process_per_use). Is there a more generic set of docs that can identify what each of the parameters and what they do, or at least something that will allow me a simple how to to avoid embarrasing situations. I supposed I should only settle for ssl based connections (imaps/pops) but I will be open to digest-md5 if I could. I'm also curious to see how I can use pgsql authentication with dovecot. I think this would be great to work with since I'm basing all my postfix settings around postgresql as well. But for now I'm not sure how to use postfix authentication with the file directories I'll need to use for the maildirs (and procmail!).

2 1

[Dovecot] pgsql configuration
by Tom Allison 10 Jun '04

10 Jun '04

from the pgsql configuration file: # Query to retrieve the password. # # The query should return one row, one column. If more than one row or column # is returned, authentication will automatically fail. # # Available substitutions: # %u = entire userid # %n = user part of user@domain # %d = domain part of user@domain # # Query to retrieve the user information. # # The query must return only one row. The columns to return are: # home - Home directory # mail - MAIL environment # system_user - System user name (for getting user's groups from /etc/group) # uid - System UID # gid - System GID # # Either home or mail is required. uid and gid are required. If more than one # row is returned or there's missing fields, login will automatically fail. # I'm a bit slow here, so if someone could just nod if I'm in the right direction: I want to support IMAP for at least two domains. Therefore I have to use the authentication string of: SELECT password FROM users WHERE userid = '%u' and the user must enter their entire email address for their login name. (I can do this!) I want some portion of these domains and users to be consistent with existing accounts in my /etc/passwd database. I don't expect to use passwd information for the username and password, but I want the information returned for joe(a)domain2.com to be for the user:joe in my passwd file and have his email in /home/joe/Maildir. Similarly, I want others (either fred(a)domain2.com or jane(a)domain1.com) to be (ideally) all driven under a non-local account name and login. For this second one, I'm thinking I need to do something like this in the user information query (this is mostly a guess): for joe(a)domain2.com (/etc/passwd) :: jane(a)domain1.com (no passwd) home - /home/joe --or-- can I use ~/ :: /var/spool/imap/%d/%n ?? mail - maildir:~/Maildir :: maildir:/var/spool/imap/%d/%n ?? system_user - joe :: (a guess -- adduser dovecot-imap to passwd maybe) uid - joes uid (1002) :: dovecot-imap uid (510) gid - joes gid (1001) :: dovecot-imap gid (510) with seperate group This is where I get fuzzy. If someone could help me figure out where I went wrong I would appreciate it. If I did this correctly, then in theory I could pass email delivery to procmail and have one set of rules (/etc/procmail) do some additional filtering for all the email under my domain1.com (spam filtering mostly) and perform a final delivery to maildirs in /var/spool/imap/doamin1.com/jane/ Or am I sleep deprived?

2 1

[Dovecot] dovecot newbie question about "invalid key" problem
by Joakim Verona 10 Jun '04

10 Jun '04

Hello list, I've trying to migrate a small uw-imap server to dovecot. It works somewhat, and speed seems greatly improved, so thats great. However, I get an "invalid key/Internal Error" problem when connectiong to my INBOX with thunderbird. According to google this is a well known problem with mozilla mailers. Dovecot is not lenient with this bug in thunderbird. Is there some workaround for this? I noticed that its possible to turn on some client bug workarounds for outlook. Does the same go for mozilla? I tried one described remedy, which was to delete the account information and re-register the account. This didnt help. The problem seems to be only with INBOX, which I have mapped to /var/spool/mail/<username>, not my other imap mailboxes. Im running gnus as well and the problem doesnt seem to occur there. My configuration: Redhat 9 dovecot 0.99.10.5 (from DAG repository RPM:s) Another question: Would it be possible to run uw-imap on one port, and dovecot on another? Or would that corrupt the mailstores? Regards, /Joakim

2 1

[Dovecot] Feature request?
by Stephen K. Gielda 10 Jun '04

10 Jun '04

I'd like to toss a feature request on the table for consideration. We currently use a different popd because of a feature that allows us to restrict pop access based upon an allowed users list. This is the only thing that keeps us from using the popd in dovecot currently. It's a simple text file of usernames that are allowed to use pop, if the name isn't in that list then pop access is denied. Is this something that can be considered for a future feature addition? Would anyone else also find this useful? /steve

3 2

[Dovecot] Help: RH9 upgrade (mbox)
by Guy Davis 09 Jun '04

09 Jun '04

I just upgraded my RH9 server with UW-IMAP to Fedora Core 2 and after a short try with Cyrus, I'm hoping to get Dovecot configured. My problem is getting Dovecot to recognize my old mbox mail folders. It correctly shows the INBOX contents from the /var/spool/mail/davis mbox. However, I also had a bunch of mboxes such as: /home/davis/Mail/Sent /home/davis/Mail/Lists/list1 Reading the documentation, Dovecot indicates it will recognize mbox files within the ~/mail directory. So I moved my mail over giving: /home/davis/mail/Sent /home/davis/mail/Lists/list1 Unfortunately, after restarting Dovecot and restarting my IMAP client (Mozilla), I don't see anything other than my Inbox. If I create a file (/home/davis/mail/.subscriptions) with 'Sent' in it, and restart things then I can see Inbox and Sent. This would let me have a single directory with multiple mbox files in it. However, I'm not able to get Dovecot to recurse and let me see mboxes in subfolders such as: /home/davis/mail/Lists/list1 As well, when I first connect to Dovecot via Mozilla, I get an error saying: 'The current command did not succeed. The mail server replied "Invalid mask"'. What does this mean and how do I correct it? Any help would be greatly appreciated. Thanks, Guy

1 1

[Dovecot] scripting or translation in config
by Nico De Beer - MWEB 09 Jun '04

09 Jun '04

> Hi Is there nay way to do translation on a char > > Exp > > tr ( "." ,"_",$domain) > > so mysql statement can lokk some thing like this > > select * uid,gid,home,.....from `tr ( "." ,"_",$domain)` where uid='$local' Are you ready for Telkom's 10-digit dialling? To find out how this will affect your Internet connection in the not too distant future, go to www.mweb.co.za/ten

1 0

[Dovecot] FW: scripting or translation in config
by Nico De Beer - MWEB 09 Jun '04

09 Jun '04

> Hi Is there nay way to do translation on a char > > Exp > > tr ( "." ,"_",$domain) > > so mysql statement can lokk some thing like this > > select * uid,gid,home,.....from `tr ( "." ,"_",$domain)` where uid='$local' Are you ready for Telkom's 10-digit dialling? To find out how this will affect your Internet connection in the not too distant future, go to www.mweb.co.za/ten

1 0

[Dovecot] failure to create lock
by Javi Pardo (DAKOTA) 09 Jun '04

09 Jun '04

Jun 8 23:14:09 dakota pop3(dakota): open(/var/spool/mail/dakota.lock) failed: P ermission denied Jun 8 23:14:09 dakota pop3(dakota): file_lock_dotlock() failed with mbox file / var/spool/mail/dakota: Permission denied Jun 8 23:14:09 dakota pop3(dakota): open(/var/spool/mail/dakota.lock) failed: P ermission denied Jun 8 23:14:09 dakota pop3(dakota): file_lock_dotlock() failed with mbox file / var/spool/mail/dakota: Permission denied Jun 8 23:14:09 dakota pop3: I/O leak: 0x8050b08 (0) Jun 8 23:14:09 dakota pop3: I/O leak: 0x807c2b4 (1) Jun 8 23:14:09 dakota pop3: Timeout leak: 0x8062520 id dovecot uid=97(dovecot) gid=12(mail) grupos=12(mail) [root@dakota root]# su dovecot bash-2.05b$ touch /var/spool/mail/dakota.lock bash-2.05b$ ls -la /var/spool/mail/dakota.lock -rw-r--r-- 1 dovecot mail 0 jun 8 23:16 /var/spool/mail/dakota.lock bash-2.05b$ i have probed all options ... dovecot no create the lock, the user dovecot works, but no the program i need help for this problem.. :( regards dakota(a)dakotabcn.net Administrador Servidor dakotabcn.net LINUX Registrered USER 93707 :) P.o Box 579 08913 Badalona (Barcelona) SPAIN firmas GnuPG en http://pgp.escomposlinux.org/ dakota(a)menta.net || dakota(a)escomposlinux.org - Equipos PIV 2.2 Ghz - 1.5 Gb RAM - W-XP Pro Dual Xeon 2.8Ghz - 1 Gb Ram - Linux Fedora Core 1 Firma para spammers: test(a)spamout.com.ar (no usar!!!)

3 3

[Dovecot] Setting IMAP root as user's home directory. How?
by Silviu Marin-Caea 08 Jun '04

08 Jun '04

I'm trying to set up dovecot to use /home/username as IMAP root, but it keeps creating /home/username/mail. I need /home/username in order to migrate with the least changes from uw-imap, just by copying .mailboxlist without the INBOX line in it into .subscriptions I tried each of these, one at a time: default_mail_env = mbox:~/:INBOX=/var/mail/%u default_mail_env = mbox:%h/:INBOX=/var/mail/%u default_mail_env = mbox:/home/%u/:INBOX=/var/mail/%u In each case, dovecot was stubornly creating /home/username/mail Please CC me, I'm not on the mailing list. Thanks.

2 1

[Dovecot] dovecot and fc2
by Javi Pardo (DAKOTA) 07 Jun '04

07 Jun '04

Hello I am migrate FC1 to FC2, in FC1 i use ipop3d, but in the migration to FC2 this programa is obsolete, i decide migrate to dovecot, but i have problems with the old mail i have the mail stored into /var/spool/mail/USER and this error appears with examine the mail with Oulook Express: Jun 6 23:24:10 dakota pop3(dakota): open(/var/spool/mail/dakota.lock) failed: Permission denied Jun 6 23:24:10 dakota pop3(dakota): file_lock_dotlock() failed with mbox file /var/spool/mail/dakota: Permission denied Jun 6 23:24:10 dakota pop3(dakota): open(/var/spool/mail/dakota.lock) failed: Permission denied Jun 6 23:24:10 dakota pop3(dakota): file_lock_dotlock() failed with mbox file /var/spool/mail/dakota: Permission denied Jun 6 23:24:10 dakota pop3: I/O leak: 0x8050b08 (0) Jun 6 23:24:10 dakota pop3: I/O leak: 0x807c2b4 (1) Jun 6 23:24:10 dakota pop3: Timeout leak: 0x8062520 into dovecot.conf i have proved differents options ###default_mail_env = mbox:/var/spool/mail/%u:INDEX=/var/indexes/%u #mbox:~/mail/:INBOX=/var/spool/mail/%u #maildir:/var/spool/mail/%1u/%u/Maildir default_mail_env =mbox:~/mail/imap/:INBOX=/var/spool/mail/%u with pine not have problem to read the mail, but i need pop3 and imap for the external users i need help, i have 1 week without email :( regards and sorry for my english dakota(a)dakotabcn.net Administrador Servidor dakotabcn.net LINUX Registrered USER 93707 :) P.o Box 579 08913 Badalona (Barcelona) SPAIN firmas GnuPG en http://pgp.escomposlinux.org/ dakota(a)menta.net || dakota(a)escomposlinux.org - Equipos PIV 2.2 Ghz - 1.5 Gb RAM - W-XP Pro Dual Xeon 2.8Ghz - 1 Gb Ram - Linux Fedora Core 1 Firma para spammers: test(a)spamout.com.ar (no usar!!!)

2 1

[Dovecot] Errors and periodic corruption using 99.10.5 release with mbox
by Stephen K. Gielda 06 Jun '04

06 Jun '04

Hi, I'm seeing these errors in our logs periodically: file istream.c: line 135 (i_stream_skip): assertion failed: (stream->v_size == 0 || stream->v_offset + count <= stream->v_size) Timeout leak: 0x8069328 Any idea on what may be causing these? System is freebsd, format is mbox. I'm also seeing periodic corruption of mailboxes. It's easily fixed because it's always a few stray lines of text left at the beginning of the mbox file above the From I'm currently trying to find out more about what actions may cause it. /steve

2 2

[Dovecot] Corrupted Indexes
by Fred Mulharin 04 Jun '04

04 Jun '04

I am using the latest Stable version of Dovecot on a Redhat 9.0 box with the Squirrelmail Webmail Client, and my Indexes seem to be getting corrupted. Here is an example of what is showing in the Error Logs Error: Corrupted index data file /home/user/mail//.imap/releases/.imap.index.data: Missing location field for record 271 When they Try to access the corrupted folders thee get an IMAP Login error ERROR: Connection dropped by imap-server Query: THREAD REFERENCES ISO-8859-1 ALL thanks Fred -- Fred Mulharin Systems Technology Supervisor Times Herald-Record fmulharin(a)th-record.com ..We are the trusted leader in news and information for the communities we serve ..because we all live here

1 0

[Dovecot] mta/mda config
by Jure Pecar 04 Jun '04

04 Jun '04

Hi all, I'm at the stage of planning our new mail system and am evaluating dovecot for it. For large mailstore setups, it makes sense to split maildirs across many directories. I see that setting default_mail_env to something like maildir:/var/imap/domain/%1d/%d/%1u/user/%u/ would create almost identical on-disk layout as multidomain cyrus setup. Now, as dovecot does not have its own mda or lmtp daemon, how does one configure mta (eg. postfix) to deliver mail in such maildirs? Related question ... any cyrus to dovecot migration tales? :) -- Jure Pečar

5 5

[Dovecot] Advice on converting from Mbox to Maildir?
by Villalovos, John L 03 Jun '04

03 Jun '04

Does anyone have advice or pointers on good documentation on how to convert a system from using the Mbox format to using Maildir? I recently upgraded to Fedora Core 2 from Fedora Core 1 and discovered that UW-IMAP was gone. So I switched over to using Dovecot. So far so good. But I would like to convert my system to start using the Maildir format. How easy is this to accomplish? Can I keep my Inbox /var/spool/mail/user_name as an mbox format and have my other folders as Maildir? What would I have to change for Sendmail to make it use Maildir for the Inbox? Can procmail support Maildir? Any pointers or help would be much appreciated? John

5 5

RE: [Dovecot] Supporting POP & IMAP with Sendmail
by Villalovos, John L 03 Jun '04

03 Jun '04

John Duino wrote: > That was the one question I haven't had answered (and it's > mostly just out of pure paranoia that I ask it :) Yes. POP email works fine with Maildir for me. I am using dovecot-0.99.10.5-1 which was on the development tree of Fedora. Though I would think the one that came stock with Fedora 2 should work as well. I have no reason to think it won't. One note. I don't use POP that much. I have one person who uses it and they haven't complained. > So if all the mail is moved to Maildir (thus eliminating the typical > mailspool), and somebody pop's onto the server, Dovecot will use the > Maildir/Inbox for the pop? Yes it will. If you read the mail-storages.txt documentation file it talks about it. I would read the section on "Detecting what to use". I did NOT set the default_mail_env variable in my /etc/dovecot.conf and it figured it out automagically :) Good luck, John

2 1

[Dovecot] 0.99.10.5 imap flag update issues
by Hauke Fath 03 Jun '04

03 Jun '04

Hi, there is an issue left in 0.99.10.5 which (I think) is a problem with imap status flags. It shows up in two places: (1) When new mail is delivered to the inbox, the last read mail changes to "unread". (2) When you move mails from the inbox to another folder with Mozilla (1.6 on win32, Linux, NetBSD), they are not removed from the inbox, effectively performing a copy instead of a move. And, while I am at it, (3) I see a regular log entry from a MS Outlook 2000 SP 3 Jun 3 10:26:23 bounce imap-login: SSL_read() syscall failed: EOF [130.83.XXX.XXX] The setup here: OS NetBSD 2.0beta, MTA sendmail 8.12.11, LDA maildrop 1.3.9, dovecot 0.99.10.5, OpenSSL 0.9.7d Any ideas? hauke -- Hauke Fath /~\ The ASCII Ribbon Campaign Institut für Nachrichtentechnik \ / No HTML/RTF in email TU Darmstadt X No Word docs in email Ruf +49-6151-16-3281 / \ Respect for open standards

2 1

RE: [Dovecot] Getting POP3 up and running
by Villalovos, John L 03 Jun '04

03 Jun '04

dovecot-bounces(a)dovecot.org wrote: > According to my understanding of the documentation I changed > the protocols > line in dovecot.conf to: > > #protocols = imap imaps pop3 pop3s Did you really just change the commented out line? If so then you didn't do anything :( You will need to uncomment the line and restart it. The "#" at the beginning of the line is a comment. John

1 0

[Dovecot] Getting POP3 up and running
by Antonio Nunes 03 Jun '04

03 Jun '04

Hi! Now that I happily smiling have Squirrelmail working on the new setup (Fedora Core 2), the next hurdle seems to be getting POP3 to work. According to my understanding of the documentation I changed the protocols line in dovecot.conf to: #protocols = imap imaps pop3 pop3s then restarted dovecot, but still can't connect to pop3 (not even after rebooting the whole system). Doing an nmap on my server does not show port 110 as open. Any clues as to what I may be overlooking? Thanks for your support, Antonio There is a world of difference between searching for happiness and choosing to be happy!

1 0

RE: [Dovecot] Supporting POP & IMAP with Sendmail
by Villalovos, John L 03 Jun '04

03 Jun '04

dovecot-bounces(a)dovecot.org wrote: > I dug thru the archives but didn't see a clear answer to > this. A client > has an existing sendmail/pop3 system, and I would like to switch to > dovecot for imap support. For imap I much prefer the Maildir > format over > mbox, however, sendmail natively dumps to mbox (mailspool) and that is > what pop typically reads. I've read the threads on how to > make sendmail > write to Maildir. > > My problem is that I'd like to support both pop/mailspool and > imap/maildir. My suggestion would be to use Dovecot as your POP and IMAP server. And convert everything to use Maildir unless there is some special reason you want to keep mbox format for. Setup procmail to deliver all mail to the maildir folders. See my previous message on how to do it. John -- A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting Q: What is the most annoying thing on usenet and in e-mail?

1 0

[Dovecot] Loggin error with Squirrelmail on Fedore Core 2
by Antonio Nunes 03 Jun '04

03 Jun '04

Hi! I am switching a mail server setup to a new machine which has RHL Fedore Core 2 installed, which uses Dovecot. I managed to get Squirrelmail to work on my personal account, but when logging in with some other accounts I get the following error as response: ERROR : Connection dropped by imap-server. Query: Capability I did a web search on this and found a message from Tim Middleton who experienced the same problem. He also suggests a workaround: "I put in a chron job to touch into existance any non-existing mailboxes for everyone in the passwd file periodically, which mostly eliminates the problem. But I'd still like to know why the server is having the problem, if anyone can make any suggestions." I would like to try this, but I am still fairly new to Unix. Could anyone show me how to set up such a chron job? Are there other, manual, ways to touch the mailboxes? Thanks, Antonio Nunes Don't let who you can be keep you from being who you already are.

2 2

[Dovecot] Supporting POP & IMAP with Sendmail
by John Duino 03 Jun '04

03 Jun '04

Greetings! I dug thru the archives but didn't see a clear answer to this. A client has an existing sendmail/pop3 system, and I would like to switch to dovecot for imap support. For imap I much prefer the Maildir format over mbox, however, sendmail natively dumps to mbox (mailspool) and that is what pop typically reads. I've read the threads on how to make sendmail write to Maildir. My problem is that I'd like to support both pop/mailspool and imap/maildir. While running dovecot in imap-only it will use mbox format to read the /var/mail/user as the Inbox and then create the full imap structure under ~user/mail but in mbox format, not maildir. If/when I turn on both pop and imap in dovecot will it allow this with the current config? Or will I still need to convert sendmail output to maildir...and then I assume dovecot/pop will read from ~user/Maildir/Inbox even though it is in Maildir format? Basically, if I'd prefer to not have to convert sendmail to Maildir format, have dovecot always treat /var/mail/user as the Inbox for both pop and imap, and for those who switch to imap, have it store their other folders in ~user/Maildir. Asking too much? Thanks! John

2 2

RE: [Dovecot] Advice on converting from Mbox to Maildir?
by Villalovos, John L 03 Jun '04

03 Jun '04

To recap what I have learned :) dovecot-bounces(a)dovecot.org wrote: > Does anyone have advice or pointers on good documentation on how to > convert a system from using the Mbox format to using Maildir? > > I recently upgraded to Fedora Core 2 from Fedora Core 1 and discovered > that UW-IMAP was gone. So I switched over to using Dovecot. > So far so > good. > > But I would like to convert my system to start using the > Maildir format. > > How easy is this to accomplish? Fairly easy on the small system I had. I only have around 8 people using email off of my system. > Can I keep my Inbox /var/spool/mail/user_name as an mbox > format and have > my other folders as Maildir? Timo says that it is NOT available in the version that comes with Fedora Core 2. It will be available in the 1.0 series by defining multiple namespaces. The current 1.0-tests allow this. > What would I have to change for Sendmail to make it use > Maildir for the Inbox? Sendmail does NOT need to be changed. > Can procmail support Maildir? Yes and that is what you need to change. I setup /etc/procmailrc to have the line: DEFAULT=$HOME/Maildir/ Make sure there is the terminating / on that line. What this will do is make all new mail that is delivered via procmail go to each user's Maildir folder. But what you need to do first is convert your existing mbox mail into maildir format. I used the program that was recommended to me: mb2md http://batleth.sapienti-sat.org/projects/mb2md/ This program worked great to convert my /var/spool/mail/user_name stuff and also folders that I had created under ~/mail/ So now my whole system is using Maildir format. If you had a big system this might be a big pain :( John -- A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting Q: What is the most annoying thing on usenet and in e-mail?

1 0

[Dovecot] Lost messages when "Moved to Trash"
by Fred Mulharin 03 Jun '04

03 Jun '04

We are using Dovecot 0.99.10.5 on a Redhat 9.0 Box. We are using the Squirrelmail Webmail client, and have occasionally had a problem with users move messages from their Inbox to the "Trash" folder. The Selected messages move to the Trash folder, but the rest of the messages in the INBOX disappear. Fred -- Fred Mulharin Systems Technology Supervisor Times Herald-Record fmulharin(a)th-record.com ..We are the trusted leader in news and information for the communities we serve ..because we all live here

1 0

[Dovecot] inbox file read/write
by Yedidia Klein 03 Jun '04

03 Jun '04

Hi, If I config my mta to write incoming mail to /var/mail/[username] and dovecot (or any other imap/pop server) is serving email from this file, can't the fie be corrupted while mta and dovecot read/write at the same time ? is there any mechanism to avoid it ? thanks --Y

2 1

[Dovecot] dovecot and virtual hosting
by Vegard Svanberg 03 Jun '04

03 Jun '04

Hi. A usual hosting provider setup depends on having one IP ("virtual mailserver") per domain. Using dovecot on servers handling hundreds or thousands of domains today equals to having multiple instances of dovecot running. This problem could be solved by making dovecot take into account the IP address the user connects to and authenticate against the proper {database, table, pw-file, [...]} based on that. Comments? -- Vegard Svanberg <vegard(a)svanberg.no> [*Takapa@IRC (EFnet)]

4 4

[Dovecot] IMAP folders missing after migrating to Dovecot
by Chris Horry 03 Jun '04

03 Jun '04

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello all, I'm migrating to Dovecot from Courier-IMAP. I use Postfix with Maildir for delivery. When I use Dovecot as the IMAP server all of my folders are missing, the only thing that remains is the Inbox folder. Has anyone else experienced this issue? I have enclosed my configuration. Thanks, Chris - -- Chris Horry "Winter is the season in which people zerbey(a)wibble.co.uk try to keep the house as warm as it was PGP: DSA/2B4C654E it was in the summer, when they complained Amateur Radio: KG4TSM about the heat" --Author Unknown -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) iEYEARECAAYFAkC+TwAACgkQnAAeGCtMZU5/IwCeNAac9HXNmZpWn7aoeINC2RH+ SeIAnRASJdvDIOi6/ZvBMzBJwWrKPJVZ =iK37 -----END PGP SIGNATURE-----

3 3

RE: [Dovecot] Advice on converting from Mbox to Maildir?
by Villalovos, John L 02 Jun '04

02 Jun '04

Dan Stromberg wrote: > For converting from mbox to Maildir, check out mb2md. I converted a > huge collection of folders using it. Thanks. I'll look into that. >> Can procmail support Maildir? > > I'm using the procmails that come with RHEL3 and FC2 for > Maildir folders > without any problem. So how did you setup procmail? Did you setup a /etc/procmailrc And then setup a: DEFAULT=$HOME/Maildir/ line in the file? Thanks, John

2 1

[Dovecot] Fedora 1 packaged version or upgrade to newest dovecot
by Daniel 02 Jun '04

02 Jun '04

Hello I running dovecot that is packaged with Fedora 1 with about 1500 email accounts approximately 5k messages per day. I have had to restart dovecot twice over a period of about 3 months due to it not responding. Overall I'm happy with the setup, however would I see and improvement if I upgraded to the latest version, at time of writing 0.99.10.5. Regards Daniel Rowe

3 4

[Dovecot] Serve list archives by dovecot IMAP
by Kenneth Porter 02 Jun '04

02 Jun '04

Has anyone considered setting up a Dovecot public server to serve the list archives by IMAP? Or does Dovecot not do anonymous read-only access? (I note by comparison that the Cyrusoft Mulberry list archives are served by an IMAP server. <http://www.cyrusoft.com/mulberry/support/anonimap.html>) It should be sufficient to set up Dovecot on some server in the dovecot.org domain and subscribe it to the lists.

4 6

[Dovecot] Dovecot + SSL + Fedora
by David Keegel 02 Jun '04

02 Jun '04

I've been seeing the Dovecot/SSL/Fedora 1 problem. I have a dovecot server which tends to die at least once a day, with messages like these :- May 24 13:44:44 mail pop3-login: RAND_bytes() failed: error:24064064:random number generator:SSLEAY_RAND_BYTES:PRNG not seeded May 24 13:44:44 mail dovecot: Login process died too early - shutting down I noticed Timo's email about this at: http://www.dovecot.org/list/dovecot/2004-May/003316.html with the patch that just ignores the return code of RAND_bytes(). Would disabling SSL in dovecot.conf also be a reasonable way of avoiding the problem of dovecot crashing? My plan is to set ssl_disable = yes and also take out pops and imaps from protocols. That is a lot easier for me than getting source, patching it, re-compiling and re-installing. We are using Fedora Core 1 (fedora-release-1-3 i386 rpm) Dovecot 0.99.10 (dovecot-0.99.10-4 i386 rpm) OpenSSL 0.9.7a (openssl-0.9.7a-33.10 i386 rpm) ___________________________________________________________________________ David Keegel <djk(a)cybersource.com.au> http://www.cyber.com.au/users/djk/ Cybersource P/L: Linux/Unix Systems Administration Consulting/Contracting

5 5

[Dovecot] 0.99.10.5 release candidate
by Timo Sirainen 02 Jun '04

02 Jun '04

http://dovecot.org/rc/ Thought I'd still make one 0.99.10.x release now that mbox corruption problems are (hopefully) fixed. Please test, if no problems are found this will be the final 0.99.10.5. Changes since .4: + MySQL authentication, patch by Matthew Reimer - mbox: APPEND reversed given \Draft and \Deleted flags - mbox: "LF not found" errors happened sometimes when X-IMAPbase header was updated. Possibly corrupted mbox sometimes. Thanks to Fabrice Bellet for finding this bug. - Custom flags couldn't be unset - Maildir: make sure ":2," is appended to filename when moving mails from new/ to cur/.

9 25

[Dovecot] Postfix SASL AUTH from Dovecot
by Timo Sirainen 01 Jun '04

01 Jun '04

Again today got annoyed at Cyrus SASL. Upgrading it to newer version had broken PAM support. Trying to login as "user@domain" resulted it only asking for "user" from PAM. Well, got it patched and working again, but I'd rather not go through it all the time.. So I finally did what I had been thinking about a year or so, change Postfix to use dovecot-auth directly. This required cleaning dovecot-auth quite a lot, but it seems to be working now. Actually I finally implemented support for initial SASL response as well. POP3's AUTH command had required support for it, strange that no-one ever complained about it not working. If you want to try it, you need very latest CVS version of Dovecot and this patch for Postfix: http://dovecot.org/patches/postfix-dovecot-auth.patch dovecot-auth can be run on it's own (configuration in environment variables), or you can use extra_sockets auth setting which is a ':' separated list of UNIX sockets where to listen in. You'd probably want to set it to /var/spool/postfix/etc/dovecot-auth, the location is hardcoded to /etc/dovecot-auth in the patch for now (smtpd is chrooted). The only real problem is that Dovecot creates the dovecot-auth socket using 0660 root:root modes, so you have to manually chmod it to 0666 or fix owner/group. I guess that needs some more thinking.. Probably each socket should have separate settings for it, but how to do it easily in configuration? .. The patch has also hardcoded dovecot path in Makefile.in, you'll need to change that.

3 4

Re: [Dovecot] 1.0-test14: no sendfile() in Solaris 8
by Andreas Jaekel 01 Jun '04

01 Jun '04

At 14:35 01/06/2004 +0300, you wrote: >On 1.6.2004, at 13:13, Andreas Jaekel wrote: > >>The current CVS snapshot and 1.0-test14 will not build on Solaris 8 >>because it does not provide a sendfile() funtion. It just has sendfilev(). >>Solaris 9 has sendfile(), though. > >Doesn't the configure detect that you don't have it? It shouldn't define >HAVE_SOLARIS_SENDFILE if it isn't there (if sendfile library doesn't have >sendfile() function). No, it doesn't. The test for the linux sendfile() function uses ac_compile, no ac_link. So all you get is an "implicit declaration" warning in configure.log, but since the final check is for test -z a.out configure will always happily detect linux sendfile. Greetings, Andy

1 0

[Dovecot] IMAP login name conversion
by Zoong Pham 01 Jun '04

01 Jun '04

Hi all, Out IMAP client (Outlook and others) use login name like joedirt(a)domainname.com I need dovecot to convert it to joedirt-domainname_com since that is the local login name. Can someone give me a hint how to do that? Is there any simple way to do it or do I have to modify any source code? Thanks, Zoong

2 1

[Dovecot] 1.0-test14: no sendfile() in Solaris 8
by Andreas Jaekel 01 Jun '04

01 Jun '04

Aloha. The current CVS snapshot and 1.0-test14 will not build on Solaris 8 because it does not provide a sendfile() funtion. It just has sendfilev(). Solaris 9 has sendfile(), though. Using the old sendfile-util.c from 1.0-test1 and setting HAVE_SOLARIS_SENDFILEV instead of HAVE_LINUX_SENDFILE in config.h works. Greetings, Andy.

3 2

[Dovecot] Small change to make dovecot pop3 uw-imap migration friendly
by Oleg I. Vdovikin 01 Jun '04

01 Jun '04

Hi, today I've finished migration from uw-imap daemons to shiny and fast dovecot. With thanks of dovecot my mail server load average drops by factor of ten even with ancient unix mailboxes. ;-) So, the only thing I've discovered is what POP3 uidls are different than ones used in the uw-imap. Luckily, the difference are only in the format string used in uidl response. So, I've made the following change in the code --- dovecot-0.99.10.4.orig/src/pop3/commands.c 2003-05-28 15:17:15.000000000 +0400 +++ dovecot-0.99.10.4/src/pop3/commands.c 2004-05-27 14:06:48.000000000 +0400 @@ -374,7 +374,7 @@ while ((mail = client->mailbox->fetch_next(ctx)) != NULL) { client_send_line(client, message == 0 ? - "%u %u.%u" : "+OK %u %u.%u", + "%u %08x%08x" : "+OK %u %08x%08x", mail->seq, client->uidvalidity, mail->uid); found = TRUE; } and got everything just like in the old uw-imap pop3. I'm current running RH9, but thinking of FC2 which uses dovecot. So, I've rebuild the FC2 rpm for RH9 including this patch. Pop3 users, which do not remove their mails from the server are really happy - they do not receive old mails twice. Probably this small change could be applied to the 1.0, or used as a config option. Any suggestions are greatly appriciated. Thanks, Oleg.

5 18

[Dovecot] 1.0-test14
by Timo Sirainen 31 May '04

31 May '04

http://dovecot.org/test/ Maildir syncing is still somewhat broken. I can't really figure out what the problem is. Maybe it's in indexes after all which are just causing bugs in syncing. I think I'll finish implementing mbox syncing and see if same problems appear with it. This release has mostly dovecot-auth changes: - Delay reporting failed authentications - Log IP address of failed authentications (if verbose = yes) - Password schemes can now be loaded from plugins. Example: http://dovecot.org/patches/1.0/password-scheme-lmpass.c - (now that I think of it, auth mechanisms could be implemented as plugins as well if they were placed in password-scheme directory, I think I'll change the directory name so it's more logical) - SASL initial responses are supported (POP3) - SHA/SHA1 password scheme implemented with OpenSSL - dovecot-auth can run as standalone process now (but that doesn't work with Dovecot itself at least yet) - Changes to make it more easier to use it outside Dovecot (eg. the Postfix patch) Added new variables which can be used: %l - local IP address %r - remote IP address %P - PID Added mail_log_prefix setting where variables can be used. So if you want eg. "imap(user,ip-addr,pid): ", set it to "%p(%u,%r,%P): ". And others: - added maildir_stat_dirs setting - several bugfixes for indexes

1 0

[Dovecot] Dovecot returns everything starting with "." as folder
by Christoph Hohmann 30 May '04

30 May '04

Hi, I'm using dovecot imapd 0.99.10.5 from debian unstable and I noticed that dovecot returns everything in the maildir folder that starts with a "." as a folder as the result of LIST "" "%" command without checking if it is really a maildir folder (must contain the directories cur, new, tmp and the file maildirfolder). This is a little bit annoying because it also returns Sylpheed's cache files '.sylpheed_cache' and '.sylpheed_mark' if they exist in the maildir. -- http://reboot.animeirc.de http://sylpheed-claws.sourceforge.net/

5 6

Re: [Dovecot] help: Unknown password scheme SHA
by martynas＠inet.lt 30 May '04

30 May '04

I dont want to change over 1500 passwords in ldap;) So, if somebody implement this, i'll change from courier to dovecot. regards, Martynas P.S. Timo, could you drop me email, when dovecot would support this. Thank you. --- Timo Sirainen <tss(a)iki.fi> wrote: > On Fri, 2004-05-28 at 16:54, martynas(a)inet.lt wrote: > > I would like to change my courier to dovecot. When I try to setup ldap au> th, > > I get error: > > dovecot-auth: ldap(martynas): Unknown password scheme SHA > > > > So, how enable SHA scheme on dovecot? > > Sorry, there's currently no SHA support. Should be pretty simple to > implement though, any volunteers? :) > >

2 1

[Dovecot] dovecot API / Virtual Folders?
by James Moser 30 May '04

30 May '04

I was wondering if anyone has done something like this, or knows of any reason it would not work. Would it be possible to use dovecot's API to create virtual folders where when messages are placed in them some other application can be executed on them? With programs like DSPAM and SpamAssassin, and with users who do not have shell access to the machines, it would be nice if there was a way they could do something like this to use dspam/sa-learn, that way they could use it with any mail application. I don't like the idea of using cron to do this. -- James L Moser james(a)powweb.com PowWeb Hosting http://www.powweb.com /(bb|[^b]{2})/, that is the Question. mysql>SELECT * FROM user WHERE clue > 0; Empty set (0.03 sec) Health is merely the slowest possible rate at which one can die... Health nuts are going to feel stupid someday, lying in hospitals dying of nothing...

2 1

[Dovecot] dovecot and nfs
by Dan Stromberg 29 May '04

29 May '04

I configured dovecot on a Fedora Core 2 system - the version that comes with FC2. I was using it with a RHEL 3 NFS server. Dovecot would again and again get stuck trying to grab an fcntl lock, even though I specified that it should only use dotlocks in dovecot.conf. Sometimes it would segfault (leaving things locked?). Often there would be two dovecot imapd processes for the same user. I've since moved dovecot onto our internal NFS server, but we have many (relatively) external imap servers where it might be nice to use dovecot, and in a number of those scenarios, NFS would be a requirement. Thanks. -- Dan Stromberg DCS/NACS/UCI <strombrg(a)dcs.nac.uci.edu>

2 1

[Dovecot] help: Unknown password scheme SHA
by martynas＠inet.lt 29 May '04

29 May '04

Hello, I would like to change my courier to dovecot. When I try to setup ldap auth, I get error: dovecot-auth: ldap(martynas): Unknown password scheme SHA So, how enable SHA scheme on dovecot? regards, Martynas

2 1

[Dovecot] Messages does not appear in OE6
by Mauricio Araya V. 29 May '04

29 May '04

Hi List! I have an issue with dovecot: Outlook express users sometimes can't see some emails (they are not even listed) that can be seen with other IMAP clients, I tested it (and it works) with Evolution, Outlook and SquirrelMail (a web mail). Please note that this is not the client bug reported at http://dovecot.org/clients.html with the message: "Message is no longer available on this server" I have the following configuration: - Postfix as MTA (ver. 2.1), using the Maildir format to store messages. - Dovecot 0.99.10.4_2 serving POP3 and IMAP. Relevant dovecot config: client_workarounds = oe6-fetch-no-newmail outlook-idle default_mail_env = maildir:/%h/Maildir Something important is that I am using freebsd 4.9, and dovecot is installed from ports (/usr/ports/mail/dovecot) Does anyone has the solution for this problem, or at least an idea of what causes it? Regards, -Mauricio

2 1

[Dovecot] IMAP views - and things to make Outlook Express not suck so much
by Geo Carncross 28 May '04

28 May '04

Some of the things that keep being brought up SEEM TO ME to be a form of IMAP crack that can be accomplished in a much more generalized manner with a little bit of thought. An idea I had a while back was for IMAP views. It accomplishes the four things I keep seeing on this list without being specific to any of them. Consider new configuration variables: rewrite Junk { folder = INBOX search = KEYWORD "Junk" post = +FLAGS (Junk) } rewrite Trash { folder = * search = DELETED fetch = -FLAGS (\Deleted) post = +FLAGS (\Deleted) } Views would not be deletable (unless one wants to invent some nonstandard IMAP extensions today), but they would otherwise look like regular folders. One could post and search and fetch messages as normal (with some alterations to various IMAP fields). In the examples I gave: A001 SELECT Junk A002 SEARCH ALL A003 SELECT Trash A004 SEARCH ALL A005 FETCH 1 FLAGS would be translated into: A001 SELECT INBOX A002 SEARCH ALL KEYWORD Junk A003 SELECT {for each SUBSCRIBED folder} A004 SEARCH ALL DELETED A005 FETCH 1 FLAGS Except, A005 would actually yield: * 1 FETCH (FLAGS ()) Instead of: * 1 FETCH (FLAGS (\Deleted)) It would probably be ideal if these were configurable per-user, but I'd be happy with system-wide rewriting. Options for rewrite could include: folder = folders that could be selected using LSUB OR a valid (existing) folder name. If this is system wide, pretty much only INBOX, INBOX.% and INBOX.* and * and % are valid :) search = tags to append to SEARCH operations on the view fetch = IMAP fields that are acceptable to STORE that we will pretend occurred when fetching. recent = IMAP fields that should be STORE'd when the \Recent flag is still set. post = IMAP fields that are acceptable to STORE that we will perform when APPENDing or STOREing. append = argument to be passed to /bin/sh -c which will receive on standard input the APPENDed body, and produce on output a STOREed body. open = argument for /bin/sh -c for when this view is SELECTed or EXAMINEd close = argument to be passed to /bin/sh -c for when the view is closed. index = argument to be passed to /bin/sh -c for when dovecot wants to index a portion of the message. standard input of the argument is the message, whereas standard output is the portion to actually index. path = a regular dovecot mailbox path that would contain the real contents of this folder. ro path = like path, but would be decidedly read-only (except for any side-effects generated by append =) Subprocesses that exit 99 would handle the task internally- thus any normal actions (such as for index = and append =) would not occur. Exit code 0 is for normal completion, and all other exit codes should generate an error. If one allowed open = and close = to be used on REAL folders, this would allow people to actually have the behavior UW-IMAP does by MOVING mail from /v/s/m into ~/mbox... One could use append = with a "Outbox" view that could write the queue at the same time as storing a copy into Sent Items. One could also use append for gpg-signing messages as they're being recorded. One could also use append for publishing to a mailing list. One could use index = to spell-check messages beforehand thus improving my chances of actually finding messages from my PHB. One could also use append =, recent = and ro path = to emulate shared folders support in a manner that would be useful for using IMAP folders as a kind of work-queue. Thoughts?

3 8

[Dovecot] ioloop.c: line 90: assertion failed: (io->fd <= current_ioloop->highest_fd)
by Charlie Allom 27 May '04

27 May '04

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I'm running the last release, not the tests, and was wondering if anyone had seen this? It happens a few times a day.. May 27 17:43:29 squeaky imap-login: [ID 480647 mail.crit] file ioloop.c: line 90: assertion failed: (io->fd <= current_ioloop->highest_fd) May 27 17:43:29 squeaky dovecot: [ID 684838 mail.error] child 23744 (login) killed with signal 6 This is on Solaris. Regards, C. - -- .signature 0x14AA7941 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (Darwin) iD8DBQFAtZzFqiZDwhSqeUERAofWAKCO2kadhJnZySSs28qkVIG2ma/HMACfdP21 wPvPym7NAST85eofOJCSods= =8c1t -----END PGP SIGNATURE-----

1 0

[Dovecot] 0.99.10.5-rc2
by Timo Sirainen 27 May '04

27 May '04

http://dovecot.org/rc/ Just a few more changes: - --with-moduledir option to configure - compile fix to Solaris 10 - mbox syncing complains if mbox is modified while we have it locked and something goes wrong (lock settings are wrong) - maildir: RENAME xx inbox.xx makes sure INBOX is uppercased. - "RAND_bytes() failed:" SSL "fix" for fedora/redhat

1 0

[Dovecot] dovecot immediately exits on Fedora 2
by Per Bothner 26 May '04

26 May '04

I "upgraded" my server running UW-IMAP on Fedora 1, to Fedora 2, which defaults to Dovecot. Unfortunately, the server refuses connecions from my client (Mozilla). It seems that Dovecot immediately exits: ps aux|grep dovecot shows nothing. Also, if I manually start up dovecot, it immediately exits, with no messages. (It does at least parse the config file, since tweaking that gives me errors.) What is surprising is that I haven't been able to "Google" to find anone else reporting someting similar, so I'm wonderring what makes my system unique. I tried downloading, compiling and running the current UW-imap. Mozilla is able to connect to it, and ask for a password, but rejects the login. Curious that we're getting two such very different failure modes. Help would be most appreciated; for now neither I nor others who use my imap server can access our mail (except by directly viewing the /var/spool/mail file). -- --Per Bothner per(a)bothner.com http://per.bothner.com/

2 2

[Dovecot] Deleted emails in Outlook Express
by Fred Mulharin 26 May '04

26 May '04

I am having problems with Outlook Express v.6 as an Imap client. Deleted emails are not making it to the Trash, or Deleted Items folders. I have been trying to find a setting in Outlook Express to control this. I am running Dovecot on a Red Hat 9.0 box. I do not have this problem with either Squirrelmail, or Mozilla. Any thoughts would be appreciated Fred -- Fred Mulharin Systems Technology Supervisor Times Herald-Record fmulharin(a)th-record.com ..We are the trusted leader in news and information for the communities we serve ..because we all live here

2 1

[Dovecot] append
by Marten Lehmann 26 May '04

26 May '04

Hello, I was testing the append function with a wrong amount of characters. The message I appended was saved in the tmp-folder. But even after I received the "BAD ..." message and after I disconnected, the message remained in the tmp-folder. Would it ever be deleted?

3 2

[Dovecot] \Deleted and expunge
by Marten Lehmann 26 May '04

26 May '04

Hello, I deleted a message by storing the \Deleted flag and called expunge. The message was deleted then, but in the file dovecot-uidlist the filename of that message is still listed, even after logging out and in again, doing select and check. When will this file be updated? Regards Marten

2 1

[Dovecot] renaming and select failes
by Marten Lehmann 26 May '04

26 May '04

Hello, I created a folder inbox.Test.Try through IMAP. LIST shows me the folder INBOX.Test.Try instead, but in the filesystem it's created inbox.Test.Try. Now every select, examine or rename gives me NO Mailbox doesn't exist INBOX.Test.Try. Seems that inbox is mapped uppercase everywhere except at "create". Regards Marten

2 1

[Dovecot] dovecot.rawlog
by Marten Lehmann 26 May '04

26 May '04

Hello, I build dovecot tih --with-rawlog and created a folder dovecot.rawlog inside the root-dir of the mailbox (same level as new, cur and tmp). For testing purposes I set the env MAIL to the maildir and started libexec/imap. This generally works, but I can't find the promised logs of input and output. Where do I have to look for them? Regards Marten

2 1

[Dovecot] feature request: undeletable folders
by Marten Lehmann 26 May '04

26 May '04

Hello, as we all know from the big webmail-services like hotmail.com, yahoo.com, web.de and so on, several folders exist and nobody can remove them for a good reason, because some services rely on them: Trash, Junk, Sent. Can can't remove Trash, because every deleted message is just moved here. You can't remove Junk, because all messages recognized as spam is moved here. And you can't remove Sent, because all messages you sent through the webmail are saved here. With the common courier-imap, everyone either has to bloat his webmail client with permanent checking if the required folders exist and recreate them if needed, or he has to patch courier-imap each time a new release appears to extend to this certain functionality. So why not just include this feature in courier-imap generally? I think there's no need to handle these folders on a per mailbox basis. Courier-imap could look at a file that contains the unremovable folders (one per line) and deny deletion of this folders. Now you might say: "You could prevent deletion of this folders in your webmail client as well." But that's only the half of the truth, because if you just want to see webmail as one option of accessing the emails, but POP3 and IMAP access is offered as well, then deletion must be restricted at IMAP side. I didn't implement this feature yet, but I'll need it in near future, so either someone else implements it our I would send you a patch after I implemented it. Regards Marten Lehmann

2 2

[Dovecot] 1.0-test13
by Timo Sirainen 26 May '04

26 May '04

http://dovecot.org/test/ - Several bugfixes, do maildir syncing problems still persist? - New %var handling code for default_mail_env / authentication things. Added: # %p - protocol (IMAP or POP3) # # You can apply a modifiers for each variable (eg. %Lp = pop3): # %L - lowercase # %U - uppercase # %E - escape '"', "'" and '\' characters by inserting '\' before them. Is anything else useful?

2 2

[Dovecot] I am a fresh dovecot user.
by rtm 26 May '04

26 May '04

__________________________________ http://postmastertalk.net = Community for postmasters.

1 0

[Dovecot] 1.0-test12
by Timo Sirainen 26 May '04

26 May '04

http://dovecot.org/test/ - "Maildir sync: UID < next_uid (446 < 447, file = .." errors should be fixed - fixes for detecting changes in uidvalidity and external uidnext changes - several fixes and cleanups in index file handling. less code than before and now changes to index header also go through transaction log. that should mean that soon I can get mmap_disable = yes to work without reading the main index file more than once. Are maildir syncing problems finally fixed now? :) I think the "message sequence out of range" problems are fixed now too. Rest of the important known problems are mostly related to mmap_disable=yes or fcntl_locks_disable=yes settings.

5 10

[Dovecot] 1.0-test10
by Timo Sirainen 26 May '04

26 May '04

http://dovecot.org/test/ Transaction log file contains now only message UIDs rather than message sequences. I'm not really sure why I originally thought sequences were better.. 0.99 Dovecot used UIDs too. A lot of difficult logic (which was also broken) went away with this change. Fixed also "Maildir sync: UID inserted in the middle of mailbox" errors. I can't anymore get this release to easily complain about corrupted indexes. That doesn't mean that the new logic is correct though, so be careful.

2 2

[Dovecot] error log?
by Marten Lehmann 25 May '04

25 May '04

Hello, for some reason dovecot doesn't start up. I'm using the default values in dovecot.conf, just changed the login_user, disabled ssl and ran sbin/dovecot, but nothing happens. No error's, I can't find any logs, no daemon anywhere, no ports bound... I don't know where to look and whatfor. I compiled with --enable-debug, but there's no extra output. Any ideas? Regards Marten Lehmann

2 2

[Dovecot] different auth configuration for pop and imap
by Roger Keays 24 May '04

24 May '04

Hi there, Firstly, thanks for the great software. I am just wondering if it is possible to configure dovecot to use different authentication configurations for the imap and pop processes. Specifically, I am looking to use a different SQL query for each process. Kind regards, Roger -- ------------------------------------------------------------- Ninth Avenue Software p: +61 7 3870 8494 f: +61 7 3870 8491 _ _ _ m: +61 405 048 371 __(@)< __(@)> __(@), w: http://www.ninthave.net \___) \___) \___) e: r.keays(a)ninthave.net ------------------------------------------------------------- Send your spam to Sam sam(a)ninthave.net http://www.ninthave.net/sam

2 1

[Dovecot] Errors from 1.0-test11
by Andrew Boothman 24 May '04

24 May '04

Timo + All, A few minutes after having some emails delivered into my mailbox I got the following messages in my maillog: May 24 03:05:27 myriad dovecot: imap(andrew): Maildir sync: UID inserted in the middle of mailbox (2 > 1, file = 1084812461.V27406I77e27.myriad.flat:2,S) May 24 03:05:27 myriad dovecot: child 81038 (imap) killed with signal 11 May 24 03:15:28 myriad dovecot: imap-login: Login: andrew [192.168.0.2] May 24 03:15:28 myriad dovecot: imap(andrew): Transaction log file /home/andrew/Maildir/.INBOX/dovecot.index.log: invalid indexid I'm only running the test releases somewhere where there is just a few mails per day at the moment, but test emails appear to be delivered without fault. I'll try -test12 which it looks like Timo has just released in case fixes in there are related. Thanks! Andrew

1 0

[Dovecot] "important" flag
by Rick Jones 23 May '04

23 May '04

I'm wondering what I'd need to do to get the "important" flag set on an incoming message according to a pre-specified header. I know the problem of this not being a "joined-up" feature in standard email, but in practice many MUAs set headers like X-priority etc, and IMAP has an "important" flag that is the obvious mapping. I'm not really sure where would be the best place to try to put something like this. Should it be the delivery agent (qmail in my case), the IMAP server (i.e. Dovecot), or the MUA? To me the MUA doesn't make sense, as the flag should be set before any specific MUA even gets to the message. Since the flags are coded into the filenames when using maildir, is it possible for qmail to deliver a message with the flag included in the filename, and will Dovecot recognise it? If so I might try hacking qmail. Or any other ideas - has anyone else tried this? -- Rick Jones

4 11

[Dovecot] 1.0-test11
by Timo Sirainen 23 May '04

23 May '04

http://dovecot.org/test/ - Added pop3_mails_keep_recent setting. Currently this only means that mails won't be moved from new/ to cur/ in maildir. More I/O friendly. - Fixed \Recent-flag handling and counters to work correctly with maildir. I think it's finally working right :) - mbox syncing fixes (but expunging still not implemented) - some other fixes.. Please try and report what problems still exist (the old ones too so I know they're not fixed).

2 2

[Dovecot] why does dovecot child die on these messages?
by Charlie Allom 22 May '04

22 May '04

Hi Timo and other dovecot fans, why, when I'm trying to read certain "Drafts" emails that I just created, or edited, do the dovecot children die (or so I think). In mutt, the behaviour is that I "c =Drafts" then select the email and I get "connection closed to squeaky.rubberduck.com". In Mail.app - she just loops, trying to read those headers again and again and again.. (and this truss is from this instance) I find that emails before a certain date are OK - but if i edit them and then try and refetch them - the child dies yet again. So I removed all .imap.* and let dovecot redo it's stuff. No go. Some followup information before the meat of the truss: http://lazy.spodder.com/~yeled/BSD/broken.dove.txt comments in ** ** all fine here.. some are chmod 600 and some are 644 - no difference ** squeaky:/home/virtual/charlie/Maildir/.Drafts# ls -laR .: total 76 drwx------ 5 charlie charlie 512 May 20 19:19 ./ drwx------ 101 charlie charlie 2560 May 20 19:32 ../ -rw------- 1 charlie charlie 5 May 14 16:57 .customflags -rw------- 1 charlie charlie 1608 May 20 19:19 .imap.index -rw------- 1 charlie charlie 20240 May 20 19:19 .imap.index.data -rw------- 1 charlie charlie 2576 May 20 19:18 .imap.index.log -rw------- 1 charlie charlie 1560 May 20 19:19 .imap.index.tree drwx------ 2 charlie charlie 2048 May 20 19:19 cur/ -rw------- 1 charlie charlie 1316 May 20 19:19 dovecot-uidlist drwx------ 2 charlie charlie 512 May 20 19:19 new/ drwx------ 2 charlie charlie 512 May 20 19:19 tmp/ ./cur: total 130 drwx------ 2 charlie charlie 2048 May 20 19:19 ./ drwx------ 5 charlie charlie 512 May 20 19:19 ../ -rw-r--r-- 1 charlie charlie 1643 May 18 22:26 1046254614.27559_1.peng:2,S -rw-r--r-- 1 charlie charlie 385 May 18 22:26 1062579361.15058_584.machine:2, -rw-r--r-- 1 charlie charlie 1228 May 19 02:38 1084772855.P1759Q1M703458.lazy:2,S -rw-r--r-- 1 charlie charlie 3967 May 19 02:38 1084801877.P1132Q1M377704.lazy:2,S -rw-r--r-- 1 charlie charlie 1046 May 14 20:56 1084813639.P18189Q0M254273.squeaky:2, -rw-r--r-- 1 charlie charlie 1343 May 14 20:56 1084813639.P18189Q1M254273.squeaky:2, -rw-r--r-- 1 charlie charlie 1103 May 14 20:56 1084813639.P18189Q2M254273.squeaky:2,S -rw-r--r-- 1 charlie charlie 3576 May 14 20:56 1084813639.P18189Q3M254273.squeaky:2, -rw-r--r-- 1 charlie charlie 3649 May 14 20:56 1084813639.P18189Q4M254273.squeaky:2, -rw-r--r-- 1 charlie charlie 1004 May 14 20:56 1084813639.P18189Q5M254273.squeaky:2, -rw-r--r-- 1 charlie charlie 475 May 14 20:56 1084813639.P18189Q6M254273.squeaky:2, -rw-r--r-- 1 charlie charlie 477 May 14 20:56 1084813639.P18189Q7M254273.squeaky:2, -rw-r--r-- 1 charlie charlie 549 May 14 20:56 1084813639.P18189Q8M254273.squeaky:2, -rw-r--r-- 1 charlie charlie 548 May 14 20:56 1084813639.P18189Q9M254273.squeaky:2, -rw-r--r-- 1 charlie charlie 1168 May 19 00:11 1084889503.P504Q0M804183.squeaky:2,S -rw-r--r-- 1 charlie charlie 1230 May 19 14:03 1084939383.P25383Q0M379510.squeaky:2,S -rw-r--r-- 1 charlie charlie 772 May 19 15:31 1084944677.P25383Q1M391194.squeaky:2,S -rw-r--r-- 1 charlie charlie 1831 May 19 18:16 1084954582.P19413Q1M810694.squeaky:2,S -rw-r--r-- 1 charlie charlie 1264 May 20 18:37 1085042265.P21880Q0M403770.squeaky:2,S -rw-r--r-- 1 charlie charlie 1264 May 20 18:42 1085042571.P22004Q0M988553.squeaky:2,S -rw-r--r-- 1 charlie charlie 1487 May 20 18:43 1085042586.P22004Q1M914498.squeaky:2,S -rw------- 1 charlie charlie 261 May 20 19:00 1085043373.P22239Q0M59297.squeaky:2,S -rw------- 1 charlie charlie 498 May 20 18:56 1085043378.P22239Q1M749605.squeaky:2,S -rw------- 1 charlie charlie 496 May 20 18:56 1085043383.P22239Q2M797760.squeaky:2,S -rw------- 1 charlie charlie 914 May 20 18:56 1085043388.P22239Q3M606724.squeaky:2,S -rw------- 1 charlie charlie 1227 May 20 18:56 1085043393.P22239Q4M166768.squeaky:2,S -rw------- 1 charlie charlie 926 May 20 18:56 1085043398.P22239Q5M426819.squeaky:2,S -rw------- 1 charlie charlie 3536 May 20 18:56 1085043403.P22239Q6M346821.squeaky:2,S -rw------- 1 charlie charlie 571 May 20 18:56 1085043409.P22239Q7M20841.squeaky:2,S -rw------- 1 charlie charlie 570 May 20 18:56 1085043415.P22239Q8M44288.squeaky:2,S -rw------- 1 charlie charlie 388 May 20 19:05 1085043951.P22418Q1M940309.squeaky:2,S -rw------- 1 charlie charlie 405 May 19 01:54 1085044017.P22527Q0M576547.squeaky:2,DS -rw------- 1 charlie charlie 1132 May 14 16:57 1085044031.P22527Q1M477831.squeaky:2,S -rw------- 1 charlie charlie 1132 May 14 20:56 1085044031.P22527Q2M732509.squeaky:2,S -rw------- 1 charlie charlie 1036 May 20 19:19 1085044751.P23280Q0M930209.squeaky:2,S ** this one wont be able to be fetched! ** squeaky:/home/virtual/charlie/Maildir/.Drafts/cur# head -20 1085044751.P23280Q0M930209.squeaky\:2\,S From: Charlie Allom <charlie(a)myinternet.com.au> To: "King, Michael" <> Cc: "Oriti, Sam" <>, "Durkin, Jeffrey" <> Subject: Re: waceo deployment portal [Scanned] References: <3730D9DE64F1F34BBAD4DDA02E64FD50760ED5(a)ceo-mail.ceo.cathednet.wa.edu.au> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <3730D9DE64F1F34BBAD4DDA02E64FD50760ED5(a)ceo-mail.ceo.cathednet.wa.edu.au> X-Mutt-Fcc: =Sent Status: RO X-Mutt-PGP: S On Thu, May 13, 2004 at 03:57:10PM +0800, King, Michael wrote: > > We would like to discuss the process at next weeks ops meeting so that > there is a better understanding of the proceeds on how it impacts on > this deployment and all other deployments. ** this one will ** squeaky:/home/virtual/charlie/Maildir/.Drafts/cur# head -20 1085044031.P22527Q2M732509.squeaky\:2\,S From: Charlie Allom <charlie(a)myinternet.com.au> To: "King, Michael" <> Cc: "Oriti, Sam" <>, "Durkin, Jeffrey" <> Subject: Re: waceo deployment portal [Scanned] References: <3730D9DE64F1F34BBAD4DDA02E64FD50760ED5(a)ceo-mail.ceo.cathednet.wa.edu.au> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <3730D9DE64F1F34BBAD4DDA02E64FD50760ED5(a)ceo-mail.ceo.cathednet.wa.edu.au> X-Mutt-References: <3730D9DE64F1F34BBAD4DDA02E64FD50760ED5(a)ceo-mail.ceo.cathednet.wa.edu.au> X-Mutt-Fcc: =Sent Status: RO X-Mutt-PGP: S On Thu, May 13, 2004 at 03:57:10PM +0800, King, Michael wrote: > > We would like to discuss the process at next weeks ops meeting so that > there is a better understanding of the proceeds on how it impacts on > this deployment and all other deployments. squeaky:/home/virtual/charlie/Maildir/.Drafts/cur# -- .signature 0x14AA7941

3 6

[Dovecot] using one-time passwords
by Johannes Berg 22 May '04

22 May '04

Hi, Is there any way to use something like OPIE (one-time passwords in everything, S/KEY) with dovecot? Here's what I want to do ultimately: * have an AUTH=XYZ method that relies on S/KEY as provided by the libpam-opie module (well, maybe not through pam) * have dovecot advertise authentication as follows: - local : PLAIN, XYZ - remote (encrypted) : EXTERNAL, and rely on certificate - remote (unencrypted): XYZ Thats the dovecot part. Then I would modify squirrelmail to a) negotiate PLAIN with an authorized web client certificate b) negotiate XYZ when without SSL or SSL without a valid certificate This way I could check my mail even from computers that I don't trust at all to not do key-logging, since I can have an S/KEY generator on my cell-phone. Does this sound feasible? I see the following advantages: * allows checking of webmail on the road, on untrusted computers, giving out only whatever you decide to look at * allows checking of mail via unencrypted IMAP, relying on one-time passwords so giving an attacker only whatever he can look at while your session is active (assuming he can't insert anything into the tcp stream...) * is otherwise encrypted, and then doesn't force using one-time keys which may be somewhat a hassle to generate. johannes

4 9

[Dovecot] maildirsize virtual quota support
by "Branko F. Gračnar" 22 May '04

22 May '04

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi. I'm interested to help you with maildirsize virtual quota support. Is there any documented dovecot api? Best regards, - -- Branko F. Gracnar Noviforum Ltd. Software & Media http://www.noviforum.si http://www.najdi.si -----BEGIN PGP SIGNATURE----- iD8DBQFArhbWfiC/E+t8hPcRAtX7AJ9A5ZtSN+6hGQVNLvEjdwV+h2AMBQCfVNem mn+DiJ2ov6+OB3O9hCu/NC8= =8rsG -----END PGP SIGNATURE-----

2 1

[Dovecot] feature request / question?
by James Moser 22 May '04

22 May '04

Occasionally we get a user who decided they need to pop their account 3 to 4 times a second... usually I just disable their account and shout "no!", but now I have someone trying to do it repeatedly with an invalid username so I don't know who to spank. =) Before if this happened I would block the IP and wait for someone to complain... dovecot doesn't make that very easy, or at least I don't see how. May 20 20:12:29 mail05 dovecot-auth: mech-plain(jhurley(a)thegrid.net): invalid username May 20 20:12:30 mail05 dovecot-auth: mech-plain(jhurley(a)thegrid.net): invalid username May 20 20:12:31 mail05 dovecot-auth: mech-plain(jhurley(a)thegrid.net): invalid username May 20 20:12:32 mail05 dovecot-auth: mech-plain(jhurley(a)thegrid.net): invalid username May 20 20:12:32 mail05 dovecot-auth: mech-plain(jhurley(a)thegrid.net): invalid username May 20 20:12:32 mail05 dovecot-auth: mech-plain(jhurley(a)thegrid.net): invalid username May 20 20:12:32 mail05 dovecot-auth: mech-plain(jhurley(a)thegrid.net): invalid username May 20 20:12:32 mail05 dovecot-auth: mech-plain(jhurley(a)thegrid.net): invalid username May 20 20:12:33 mail05 dovecot-auth: mech-plain(jhurley(a)thegrid.net): invalid username May 20 20:12:33 mail05 dovecot-auth: mech-plain(jhurley(a)thegrid.net): invalid username May 20 20:12:33 mail05 dovecot-auth: mech-plain(jhurley(a)thegrid.net): invalid username May 20 20:12:33 mail05 dovecot-auth: mech-plain(jhurley(a)thegrid.net): invalid username May 20 20:12:33 mail05 dovecot-auth: mech-plain(jhurley(a)thegrid.net): invalid username May 20 20:12:34 mail05 dovecot-auth: mech-plain(jhurley(a)thegrid.net): invalid username May 20 20:12:34 mail05 dovecot-auth: mech-plain(jhurley(a)thegrid.net): invalid username No IP address, and we do not host thegrid.net. There are no other messages or authetication errors being logged anywhere else either. It would be helpful to have dovecot display the IP address of failed authentications as well... it allready show's it for login's. -- James L Moser james(a)powweb.com PowWeb Hosting http://www.powweb.com /(bb|[^b]{2})/, that is the Question. mysql>SELECT * FROM user WHERE clue > 0; Empty set (0.03 sec) Health is merely the slowest possible rate at which one can die... Health nuts are going to feel stupid someday, lying in hospitals dying of nothing...

3 3

[Dovecot] Dovecot Questions
by Adam Kessel 22 May '04

22 May '04

Hi. I have two questions that don't appear to be answered anywhere: - Many of my users use a fetchmail ssh tunnel to get their mail. Typically this looks like poll 140.247.60.120 with proto imap: plugin "ssh -2 %h /usr/sbin/imapd" auth ssh; uw-imapd provides a binary /usr/sbin/imapd that can be used for an ssh-imap tunnel. I found /usr/lib/dovecot/imap (in Debian) which might work as a replacement, except that it appears that running /usr/lib/dovecot/imap doesn't properly read in the configuration file--for example, it is trying to create dotlocks, but in the configuration I have flock. Is there any way I can do what I want to do here? - Dovecot seems to be dying spontaneously in conjunction with SquirrelMail. Do you have any experience of this? SquirrelMail ends up reporting that there was no response to the CAPABILITY query. If I restart Dovecot, everything is fine again. I don't see anything in the logs to indicate the problem. Any ideas why this might be happening? Thanks for any pointers... -- Adam Kessel http://adam.rosi-kessel.org

2 2

[Dovecot] Why the name dovecot?
by Sven Kirmess 22 May '04

22 May '04

Why is docecot called dovecot? Actually, nobody likes these "rats with wings". ;-) Timo, can we know that or is it a secret? Sven

2 1

[Dovecot] mbox folders
by Villalovos, John L 22 May '04

22 May '04

I just upgraded to Fedora Core 2 from Fedora Core 1. Discovered that UW-IMAP was replaced with Cyrus. Not quite ready to switch to that mail box format so I instead installed dovecot which comes with Fedora Core 2. The RPM version is: dovecot-0.99.10.4-4 The problem I am having is that it seems to want to put folders in: ~/mail/mail/ I would like the folders to be in: ~/mail/ Currently in ~/mail/ there is a .subscriptions file. Am I stuck with having my folders be in ~/mail/mail/ ? Is there some configuration change that I can do? Thanks, John -- A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting Q: What is the most annoying thing on usenet and in e-mail?

3 2

RE: [Dovecot] Dovecot Questions
by Julian Melville 21 May '04

21 May '04

> I suppose I should have mentioned that this is Debian sid, so Dovecot > 0.99.10.4 and SquirrelMail version 1.5.0. Not using pgsql or ldap. What happens if you telnet to e.g. port 143 when this is happening? Do you get a response from dovecot? I ask because I was experiencing the same symptom on a Debian (testing) machine a couple of months back. I had some assistance from Jaldhar but didn't get much closer to the answer. Eventually I put it down to low memory problems (it was a virtual-mode Linux server and had memory probs with other apps) and shifted to a real server with plenty of RAM. That's now also running Debian sid, dovecot and Squirrelmail without any problems. Cheers, Julian.

2 1

RE: [Dovecot] mbox folders
by Villalovos, John L 19 May '04

19 May '04

dovecot-bounces(a)dovecot.org wrote: > No, he means in your dovecot.conf file Oh. Oops :) Initially I had nothing. And then went with the following: #default_mail_env = default_mail_env = mbox:~/mail/:INBOX=/var/spool/mail/%u John -- A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting Q: What is the most annoying thing on usenet and in e-mail?

1 0

RE: [Dovecot] mbox folders
by Villalovos, John L 19 May '04

19 May '04

dovecot-bounces(a)dovecot.org wrote: > * Villalovos, John L <john.l.villalovos(a)intel.com> (20040518 13:46): >> The problem I am having is that it seems to want to put folders in: >> >> ~/mail/mail/ > > How is your `default_mail_env' variable configured? I have: [john@webhost john]$ set | grep -i mail MAIL=/var/spool/mail/john MAILCHECK=60 [john@webhost john]$ John -- A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting Q: What is the most annoying thing on usenet and in e-mail?

2 1

[Dovecot] having hell of the time converting away from UW
by Eric S. Johansson 18 May '04

18 May '04

I just want to check and make sure not missing anything. I'm trying to convert a customer away from UW. unfortunately, all of the mailboxes are in MBX format (my own mistake coming back to haunt me). mailutil doesn't seem to do conversions properly. It keeps complaining about an existing copy of /mbox and only if I say to -merge append will the copy proceed. mailsync doesn't work well with hierarchies of mailboxes. its copies the top level mailboxes but proceeds to get sick on the sub mailboxes. I'm not sure what other tools there are to help me get out from the mbx rathole and over to the maildir wallow. any suggestions?

2 1

[Dovecot] dovecot (mutt?) tells me I have new email (when I don't)
by Charlie Allom 18 May '04

18 May '04

Hi, does anyone else, whilst using mutt, have the problem where you read your new email - then change to another mailbox, *then* mutt tells you that you have new email in the mailbox you just read!? It seems to only happen when I: a) receive email in, say, =mi b) change to, and read email in =mi c) hit 'c' to change to next-unread mailbox d) mutt says "New mail in imap://yeled@localhost/" e) I 'c' back there to =mi and there is no New email - but there are some Old 'unread' emails (ie "O" status in mutt) I've attached the IMAP logs. Of special note is the RECENT after the thread 'a1192' in the file 203.018.243.123.00143-203.031.232.002.57 a1192 OK Status completed. * STATUS "mi" (RECENT 1) a1193 OK Status completed. I believe it's telling mutt that there is a new email in "mi" after I've just read it! a1184 OK Status completed. * 890 FETCH (UID 901 BODY[] {3661} ^^this is the email I just read, and is now "New" again. Subject: test2 Is this a mutt or dovecot bug/feature? Regards, C. -- charlie(a)rubberduck.com - Melbourne, Australia http://rubberduck.com/~yeled/ PGP: 0x14AA7941 || finger yeled(a)lazy.spodder.com

5 5

[Dovecot] maildirsize
by Brian Candler 17 May '04

17 May '04

Hello, Are there plans to implement Maildir++ quotas (maildirsize) in dovecot in the near future? Also - how do things work if you have multiple dovecot frontends accessing an NFS mailstore? If you keep the index files on local disk, and clients connect alternately to different machines, are the stale indexes noticed and corrected? Thanks, Brian.

2 1

[Dovecot] Dovecot vs. Courier-Imap
by Marten Lehmann 17 May '04

17 May '04

Hello, I've heard of both and I already tested and installed both, but I'm not sure which one is better, since both just seem to work and I can't see a difference, except from the point how it's set up and configured. Where are the drawbacks of each one, where are the benefits? I also tested cyrus before, but cyrus is not working well with maildirs. I'm not that into detail of both projects, maybe you can explain a bit. Thanks in advance for every answer! Regards Marten

5 6

[Dovecot] 1.0-test9 released
by Timo Sirainen 17 May '04

17 May '04

http://dovecot.org/test/ - SORT command always replied with NO - Locking fixes. Fixes several crashes, dotlock errors and deadlock errors - When multiple sessions were concurrently modifying mailbox it often mixed up the messages that were supposed to be modified. When expunging it also gave errors such as: Corrupted transaction log file /home/user/Maildir/.INBOX/dovecot.index.log: Expunge range 5..5: UIDs 6..6 doesn't match real UIDs 18..18 Now it doesn't do it as often, but it still does.. I'm not really sure where the bug is. Have to keep looking. This seems much more stable than test8, but because of the above problem I still don't recommend it for more than testing.

1 0

[Dovecot] local auth
by Kees Cook 15 May '04

15 May '04

Is there a way to run dovecot locally as a user, like uw-imap lets you do? I want to use dovecot with fetchmail over ssh... I couldn't find anything in the archives on this. -- Kees Cook @outflux.net

2 1

[Dovecot] can I share IMAP folders for multiple user
by Hitao 14 May '04

14 May '04

Hi, Dear all, Just a bit curious, could I configure dovecot for two users share the access to certain IMAP folders in the mailbox? I searched the list archive and only found http://dovecot.org/list/dovecot/2004-April/003236.html and http://dovecot.org/list/dovecot/2004-April/003168.html, but I am not sure is this the same thing that I want and where could I find more details? Wish you a nice day! Hitao

1 0

[Dovecot] dovecot-1.0-test8 / nfs / maildir / flags issues
by Maikel Verheijen 14 May '04

14 May '04

Hi List, While (bluntly) testing the prerelease version of dovecot on our mailfarm (just for the webmail imap) we noticed some small problems: - While our OLD dovecot/imap drove the load to a maximum of 1 over a day after running, the new dovecot/imap pushes it easily to 20. This is mainly due to a LOT more disk activity. This is probably caused by the fact we a) use indexes on disk and b) there are no indexes left. I hope this will smooth out when most of the indexes are made. - We notice some very strange "delete" flag things in our IMP webmail system (working on a test environment to be more specific). The problem is that if you mark some messages "deleted", a lot of messages that do NOT have "deleted" flag are also in the deleted list. Since nothing changed on the webmail, it must be in the way dovecot responds different in the new version on certain requests. - In the dotlocking code, it seems that dovecot uses time() for it's internal locktime, and uses stat() to see if the file-time of the lock is different. Since we use nfs there might be a time-difference on the file creation and time() when our nfs gets "busy". This happens a lot when the indexes are created for multiple users at the same time resulting in a lot of: May 12 08:57:44 mf1 dovecot[3763]: imap(user(a)domain.tld): Our dotlock file /var/mail/mounted/d/do/domain.tld/user/Maildir/.INBOX/ dovecot.index.log.lock was modified (1084345063 vs 1084345062), assuming it wasn't overridden I am not completely sure if this interrupts imap traffic. I think this MIGHT be solved by storing a stat() time as the locktime instead of a time(), but this might be intentional. - I patched dovecot to report its pid in syslog messages, in order to find the "killed by signal X" where X are mostly 11 and 6 processes. The pids reported do not show up in the rest of the log file, so these may be "disconnected" sessions? It seems that the "old" version has the same problem, and nobody really complained it was broken, so this isn't a big issue. To clarify our setup: We use multiple mail-frontends running dovecot that are load-balanced by a cisco load-balancer. We mount our mailstores from an active-active backend cluster, both nodes export a big partition, and take over the job of the other in case of a problem. This seems to go pretty smooth. Our users are stored in a pgsql database. In our current setup, we run a modified cvs version of dovecot from WAY back, to support nfs. The backdraw is that we can't use the newer dovecot releases, since I couldn't modify the source in the way I did it the first time (with a LOT of help from Timo :P). If anyone has some ideas on where to look and where to test in order to get our problems more clear, I would be very grateful :) Kind regards, Maikel Verheijen Ladot Nederland BV.

5 5

[Dovecot] Problem building 1.0-test7 : missing header
by Curtis Maloney 13 May '04

13 May '04

Greetings, I recently rolled out Dovecot in our small (<30 people) company, and have been mightily impressed by the quality, performance and ease of use. I was hoping to use the new versions soon, as I'd like to start using CRAM-MD5 (much more common in mail clients than DIGEST-MD5), but found the 0.99.11 versions too unstable. So, I tried to build last nights CVS snapshot (May 10th), only to have the make break at this point: make[3]: Entering directory `/home/src/dovecot-1.0-test7/src/lib-index' make[3]: *** No rule to make target `mail-index-util.h', needed by `mail-cache.o'. Stop. I know it's not much, but it's a start at giving back a little. Hope it helps. -- Curtis Maloney

5 4

[Dovecot] Codepage of folder names
by Petr Tuma 13 May '04

13 May '04

Hi, I have run into a problem configuring DoveCot 0.99 on a Linux server that handles Windows users. The server uses UTF8 on its filesystem but the Outlook IMAP folder names are sent in what looks like CP852. As a result, folder names that use national characters are damaged, which in turn breaks a webmail application running on the same server. A natural solution would be DoveCot translating folder names from CP852 coming across the wire to UTF8 used in filesystem operations, but I did not find any option for that in the configuration. Anybody encountered and solved this problem ? Petr Tuma

2 1

[Dovecot] Is Dovecot ready for production use?
by Benjamin J. Weiss 12 May '04

12 May '04

Hi! I'm currently running RH 9 with postfix, uw-imap and MailScanner. I want to install Fedora Core 2 (when it comes out next week) with postfix, dovecot and amavisd. I'm unhappy with the problems I'm having with MailScanner, with the difficulty I've had with authentication as I am currently configured, and want to move to Maildir instead of mbox. That being said, is dovecot stable enough yet for production use? I only have four users on my home linux box, but I personally get around 500 emails a day (that fedora list is *busy*). Thanks, Ben

6 11

[Dovecot] php.ini tweak
by Avery 12 May '04

12 May '04

I noticed this is my /etc/php.ini file ---------------------------------------- ; This directive tells PHP whether to declare the argv&argc variables (that ; would contain the GET information). If you don't use these variables, you ; should turn it off for increased performance. register_argc_argv = on ---------------------------------------- I ma trying to squeeze some extra performance out of my email server. If I turn this to off will this cause any problems with SQmail or any of SQmail's plugins. I tried turned this setting to off and everything seems to work fine. I am surprised that no one has asked about this before in this mailing list. Thanks, Avery

1 1

[Dovecot] LDAP + passwd
by Paolo Basenghi 12 May '04

12 May '04

Hello, I'm in the process to choose between Courier and Dovecot. I would like to know if it's possible to configure Dovecot in order to use multiple user database (e.g. ldap+passwd) in order to have both virtual user authenticated by LDAP and system user authenticated by system password and with their own home directory. Another question: at http://dovecot.org/doc/dovecot-example.conf there is a configuration example that seems not work with Dovecot 0.99.10.4 It result in a "Fatal: Error in configuration file /etc/dovecot.conf line 391: Missing value". Line 391 is: "auth default {" Thank you for attention. Best regards. -- ___________________________________________________________________ Ing. PAOLO BASENGHI :::: Systems & Networking Engineer p.basenghi(a)netribe.it ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ NETRIBE srl :: Collaborative E-Business 42100 :: Reggio Emilia :: Italy :: Via della Costituzione, 27/4 ph. +39 0522 232378 :: fax +39 0522 232386 :: http://www.netribe.it ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯

2 2

[Dovecot] Case sensitive user names
by Jeff Graves 11 May '04

11 May '04

Hello list. This is my first post and I hope that I have something useful for people. Using Fedora Core 1 with the stock dovecot-0.99.10 RPM I noticed that user names were case sensitive which was a problem for me since I was attempting to set up winbind authentication which meant that what dovecot thought the homedir was could change depending upon the case the user typed in. Sendmail/procmail always changed the username to lowercase so I needed a way to duplicate this behavior. At any rate, I searched the archives and found Andrew's post from March: http://www.dovecot.org/list/dovecot/2004-March/003067.html - using this as a jumping point and I finally have case insensitive user names (better yet, forced lower case usernames) working for plain-text authentication (eg. dovecot.conf: auth = plain, auth_userdb = passwd, auth_passdb = passwd). It has been tested only on the source RPM from Redhat FC1 and I'm not a C programmer so I have no idea if it will work with other authentication methods or newer versions of software. I've rebuilt the RPMs (source and i386) if anyone's interested and here's the patch for those not using RPMs (it's attached as well): diff -ru dovecot-0.99.10/src/auth/mech-plain.c dovecot-0.99.10.new/src/auth/mech-plain.c --- dovecot-0.99.10/src/auth/mech-plain.c 2003-05-18 08:26:28.000000000 -0400 +++ dovecot-0.99.10.new/src/auth/mech-plain.c 2004-05-11 16:58:30.000000000 -0400 @@ -57,6 +57,7 @@ authenid); } + auth_request->user = str_lcase(auth_request->user); if (!mech_is_valid_username(auth_request->user)) { /* invalid username */ if (verbose) { Thanks, Jeff Graves, MCP Customer Support Engineer Image Source, Inc. 10 Mill Street Bellingham, MA 02019 508.966.5200 - Phone 508.966.5170 - Fax jeff(a)image-src.com - Email

1 0

[Dovecot] nfs dotlock issues
by Maikel Verheijen 11 May '04

11 May '04

Hi List, While testing with dovecot-1.0-test8 on our platform, I get al lot of these: May 11 11:42:50 mf1 dovecot: imap(user(a)domain.tld): Our dotlock file /var/mail/mounted/d/do/domain.tld/user/Maildir/.INBOX/ dovecot.index.log.lock was modified (1084268570 vs 1084268875), assuming it wasn't overridden This is probably due to some time-issues on our platform, and the load the backend has. (our backends run in a live environment). Can the dotlock code get the timestamp of the file when the dotlock gets created in order to be able to keep the time in sync? Is there another way to prevent those seconds of time-difference? we run ntpd on both our frondends and our backends. Kind regards, Maikel Verheijen

1 0

[Dovecot] 1.0-test7
by Timo Sirainen 10 May '04

10 May '04

http://dovecot.org/test/ Lots of bugfixes related to syncing. There's still some left. Somewhat working mbox support: - combined syncing/rewriting uses much less disk I/O than with older mbox code - expunges aren't working yet - last-uid field in X-IMAPbase header isn't updated - it's currently syncing the whole mbox constantly even if it hasn't changed - it isn't hiding the mbox-specific headers from IMAP clients - if mbox hasn't changed, rewriting could start from the message which requires rewriting instead of syncing the whole mbox - syncing could keep the lock file extra two seconds to make sure if someone changes it the file's mtime changes -> as long as only Dovecot is modifying it, we'll never need to sync the whole mbox -> multi-gigabyte mboxes are still fast! One nice thing about this mbox code is that it isn't exactly mbox-specific. Some people are still using formats which use eg. ^A as separator rather than From-line. Some people are using SMTP-formatted data directly ('.' as mail separator, '..' = normal line begins with '.'). These formats should be pretty easy to implement now as all mbox-specific code is in istream-raw-mbox.c file. I'll probably do that once mbox itself is fully working.

3 4

[Dovecot] Mail always is delivered to /var/mail/
by Kevin Breit 07 May '04

07 May '04

Hey, I am setting up Dovecot on Debian with Postfix. I am telling Dovecot to use maildir:~/Maildir but it persists in dumping mail in mbox format in /var/mail/username. Can anyone suggest ideas? My config file is attached. Thanks Kevin

5 7

[Dovecot] imap indexing error when moving multiple mails
by Hauke Fath 06 May '04

06 May '04

Hi, I've got an 'interesting' problem with a dovecot 0.99.10.4 setup on NetBSD/i386 1.6ZK. dovecot is serving imap only at the moment, using mbox format mailboxes. '/etc/dovecot.conf' is pretty vanilla - among the modified settings, mail_read_mmaped = yes maildir_check_content_changes = yes mbox_lock = fcntl could be relevant. Anyway - from time to time when I move a bunch of mails ( < 1) from a mailbox to another (or to the trash), the client (I've seen it with Eudora 6 on a Mac, with Mozilla 1.6 and Sylpheed on NetBSD) reports an "internal error" and the maillog shows Mar 25 14:07:33 bounce imap-login: Login: hf [130.83.xxx.yyy] Mar 25 14:07:44 bounce imap(hf): Error indexing mbox file /home/hf/Mail/Leute/Marc Wirth: LF not found where expected Mar 25 14:09:30 bounce imap(hf): Error indexing mbox file /home/hf/Mail/Leute/Marc Wirth: LF not found where expected which, if I retry the operation to another time, does not persist and is not strictly repeatable. I've set the number of allowed concurrent connections to '1' on the client, but that doesn't help. Is there anything obvious that I overlooked, or have I tripped over a genuine bug? hauke -- Hauke Fath /~\ The ASCII Ribbon Campaign Institut für Nachrichtentechnik \ / No HTML/RTF in email TU Darmstadt X No Word docs in email Ruf +49-6151-16-3281, Fax -3778 / \ Respect for open standards

4 5

[Dovecot] Dovecot chrooting
by ?a??µp?? ?a?a???t?? 06 May '04

06 May '04

hello all i am new to dovecot and i have a small problem. I use qmail as a pop3 server and dovecot as imap. my rc script is as follows: -----snip----- #!/bin/sh exec env - PATH="/var/qmail/bin:$PATH" \ qmail-start '|preline procmail' splogger qmai -----end----- thus i deliver mails through procmail so all mails are located to /var/spool/mail. The problem exists when i tested chrooting and found it a very good idea to jail all my users.. *but* still qmail delivers mails to the real /var/spool/mail and not to the /home/chrootusers/var/spool/mail so that dovecot can pick them up. Is there any special configuration in dovecot.conf in order to chroot the /var/spool/mail to /home/chrootusers ? some of my conf: login_chroot = yes valid_chroot_dirs = /home/chrootusers mail_chroot = /var/spool/mail default_mail_env = mbox:~/mail/:INBOX=/var/mail/%u PS: tell me if you need more of the dovecot.conf PS2: sorry for my english its not my native

2 1

[Dovecot] Re: Timezone of logentries from dovecot (Timo Sirainen)
by Lars Skovgaard 04 May '04

04 May '04

On Thu, 2004-04-29 at 15:57, Timo Sirainen wrote: > One more reason to make all logging go through dovecot-master process.. > > Temporary fix of course is setting login_chroot = no to config file. Thanks, Timo, that did the trick. Also thanks to Quentin for his reply, though I don't understand any of it. As stated, my knowledge of unix is rather limited... On Thu, 2004-04-29 at 15:48, Quentin Garnier wrote: > It's because the logging process is chrooted, doesn't have TZ env. var. > set, and doesn't have a correct /etc/localtime (or whatever your libc > uses) _inside_ the chroot directory. Therefore its timezone is the > default, UTC (formerly known as GMT). As I understand it, it would be a good idea to come up with a more permanent fix. However, I have no idea where to begin. Timo writes about making all logging go through the dovecot-master process – can anyone point me in the direction of information on how to accomplish this? Quentin writes about TZ env. var. (TimeZone?), /etc/localtime and the chroot directory. I'm sorry, Quentin, but I need a bit more info. I have the correct /etc/localtime, as far as I can tell. I've tried looking up TZ env. var. in my man-pages, but haven't come up with anything. I'll copy my /etc/localtime to the login_dir and see if this is enough. Thanks again, guys! /Lars

2 1

[Dovecot] Envelope From changed - why?
by Tom Alsberg 04 May '04

04 May '04

Hi there. I am evaluating Dovecot as an IMAP server. I noticed on thing which irritates me. When a user saves a message to an IMAP folder with the Dovecot server, the envelope From line is changed to the address of that user, instead of keeping the From line of the original message. How can I have the original envelope From line preserved when saving messages? -- Tom -- Tom Alsberg - certified insane, complete illiterate. Homepage: http://www.cs.huji.ac.il/~alsbergt/ * An idea is not responsible for the people who believe in it.

5 18

[Dovecot] Maildir files in cur without info
by Christoph Hohmann 04 May '04

04 May '04

Hi, I have tried to use the same Maildir dovecot uses with another program and encountered the problem that Dovecot seems to move files from new to cur in maildir-sync.c::maildir_scan_dir without adding an info part. On the page http://cr.yp.to/proto/maildir.html is written that mails have to be renamed to uniq:info when moved to the cur directory. Could this be a bug in dovecot? -- http://reboot.animeirc.de http://sylpheed-claws.sourceforge.net/

3 3

[Dovecot] 1.0-test4
by Timo Sirainen 03 May '04

03 May '04

http://dovecot.org/test/ Maildir syncing should be pretty optimized now. And it works now with more than 40 messages in mailbox :)

1 0

[Dovecot] Dovecot hangs after 2 or 3 days
by Jens Gutzeit 03 May '04

03 May '04

Hi all, We've some problems with our dovecot installation, its the latest stable compiled on a debian woody box. After 2 or 3 days dovecot hangs, no user can login (pop3 and imap), there's nothing in the logs. The client does allways timeout, if I restart dovecot all works well again. It's a box with s.th. around 400 users, we've enough mem free, load is not a problem, it went from 0.9 to 0.1 after migrating from cyrus-imapd, so this doesn't seem to be hardware related. My dovecot conf is online at: http://mail.sunday.de/dovecot.conf best regards/Mit freundlichen Grüßen Jens Gutzeit -- Tel.: +492151 652945 Ein PC besteht sowieso i.d.R. zu 90% aus faulen Kompromissen, zu 7% aus Elektronikschrott und zu 3% aus wirren Ideen. Benedict Mangelsdorff

1 0

[Dovecot] 1.0-test1 released
by Timo Sirainen 03 May '04

03 May '04

http://dovecot.org/test/ I couldn't break this with Evolution with a few minutes of testing, so here's the first tarball release based on the new indexing code. Try if you're interested, but don't try it on any real mailboxes, or at least keep backups :) Also note that dovecot-uidlist file format has changed a bit, Dovecot 0.99.x isn't able to read it anymore. Things to do: - mbox code doesn't even compile, so it's disabled - custom flags aren't implemented - recent flags are broken - cache file handling isn't working now, so it's disabled - maildir syncing code isn't as well optimized as it used to be - NFS-safety to indexes (pretty easy)

3 7

[Dovecot] 1.0-test2 released
by Timo Sirainen 03 May '04

03 May '04

http://dovecot.org/test/ I still haven't done much real world testing, but I've been thinking about all the potential race conditions a lot since last time and fixed a lot of them. There might still be some.. Changes since -test1: - Locking fixes - A lot more difficult to crash it with corrupted index files - Recent flag works, this time exactly as IMAP RFC says - Maildir syncing fixes - fcntl_lock_disable and mmap_disable settings to make it work with NFS.. almost. Not very well tested and there's a few performance issues left. - mmap_no_write setting to disable mixing write/mmap calls. Required for OpenBSD. Uses slightly more memory. If you can break the indexes, I'd like to know about that. I think they should work pretty well now.

2 1

[Dovecot] Timezone of logentries from dovecot
by Lars Skovgaard 29 Apr '04

29 Apr '04

Hi I've been using dovecot for a long time now, and have nothing but praise for it. It's considerably faster than uw-imap, and has been very easy to configure, in spite of my limited knowledge of unix. One thing still botheres me, though, and that's the time of the entries in my logfiles. It seems that dovecot logs it's entries in GMT, while I'm using GMT+1. This is made even worse by the fact that we're now using daylight savings time, which upps the difference to two hours. Here's a couple of lines from my logs to show the difference: Apr 29 14:30:07 misterp mach_kernel: ipfw: 10000 Deny UDP 213.122.19.185:33123 129.142.126.35:137 in via en0 Apr 29 14:30:59 misterp mach_kernel: ipfw: 4000 Accept TCP 80.197.22.210:38518 129.142.126.35:995 in via en0 Apr 29 12:30:59 misterp pop3-login: Login: torben [80.197.22.210] Apr 29 14:32:25 misterp mach_kernel: ipfw: 10000 Deny UDP 195.122.208.191:1066 129.142.126.35:1434 in via en0 I don't know how to fix this, whether it's in dovecot or somewhere in a system-setting. However, all other applications log their entries with the systems current setting, so I suspect it's in dovecot. I would very much appreciate any help on the subject. Btw, I'm using MacOS X 10.2 with dovecot 0.99.10.4. Thanks! /Lars

3 2

[Dovecot] Index abuse
by Rick Jones 28 Apr '04

28 Apr '04

How resilient is Dovecot's indexing mechanism? (seeing as it's been extensively re-vamped I guess this question may have different answers for 0.99 & 1.0). To put it in context, I'm playing with server-side automatic maintenance scripts for things like deleting messages more than x days old from folders a, b, c, etc. (using Maildir layout). So far I'm just zapping files in the cur and new directories and nothing amiss appears to happen from the IMAP client's viewpoint. I just wonder if I'm storing up trouble. Will the index files continue to hold references to non-existent files and get bloated, or do they self-clean? -- Rick Jones

3 3

[Dovecot] Feature request: more log info/stats
by Christian Balzer 27 Apr '04

27 Apr '04

Hello, even though Timo seems to be hibernating (it's not _that_ cold in ole Suomi ;) I'd like to beg for a feature that would be very much appreciated over here. If something like this is already present and eluded my thorough archive and doc searches, feel free to smack me and then point me to the right direction. Feature request: More extensive session information and statistics in the logs. Currently all I can get from dovecot is login information, there's not even a log entry when a session was ended either by the client or a timeout. In addition a short summary would be be very helpful, qpoppers one liner stats come to mind like this: --- Apr 12 05:30:30 test in.qpopper[21266]: Stats: test 6 21868 2 108126 some.do.main IP.AD.DR.ES [pop_updt.c:296] --- Stating that user test downloaded/deleted 6 mails with 21868 bytes total and kept 2 in the inbox. This might be expanded on for IMAP operations like moves or such and raw data about transferred bytes in/out added (in my case I get that info from perdition), but the really important parts are: When did a user log into the server, when did that session end? How many new mails were read and how many mails deleted during that session? The rationale is that with this info at hand the (unfortunately) very common user whining along the lines of "the mail server ate my mails" or "I never saw this mail!" are much easier to refute. Regards and keep up the good work, Christian Balzer -- Christian Balzer Network/Systems Engineer NOC chibi(a)gol.com Global OnLine Japan/Fusion Network Services http://www.gol.com/

5 6

[Dovecot] Setting "default_mail_env" Why is index->mailbox_path empty?
by Robert McLay 27 Apr '04

27 Apr '04

I now have default_mail_env = mbox:~/mail:INBOX=:/var/spool/mail/%u I now getting: Apr 26 15:55:32 jedrik imap(mclay): open() failed with mbox file : No such file or directory I tracked down where the error message is getting generated and added some more printing: In mbox-index.c I added: int mbox_set_syscall_error(struct mail_index *index, const char *function) { i_assert(function != NULL); i_error("index->mailbox_path: %%%s%%", index->mailbox_path); i_error("index->dir: %%%s%%", index->dir); i_error("index->filepath: %%%s%%", index->filepath); i_error("index->control_dir: %%%s%%", index->control_dir); index_set_error(index, "%s failed with mbox file %s: %m", function, index->mailbox_path); return FALSE; } This generates the following output. It seems clear that the initial reading of mbox is read correctly because index->dir and others have values derived from it but for some reason mailbox_path is empty. This is version 0.99.10.4 built with gcc 3.3.2. Here is the bottom of running ./configure: --------------------------------------------------------------------------- Install prefix ...................... : /vol/pkg/dovecot/0.99.10.4 File offsets ........................ : 64bit Building with SSL support ........... : yes (OpenSSL) Building with IPv6 support .......... : yes Building with pop3 server ........... : yes Building with user database modules . : static passwd passwd-file (modules) Building with password lookup modules : passwd passwd-file shadow pam (modules) --------------------------------------------------------------------------- Apr 26 17:06:51 jedrik imap(mclay): index->mailbox_path: %% Apr 26 17:06:51 jedrik imap(mclay): index->dir: %/home/mclay/mail/.imap/INBOX% Apr 26 17:06:51 jedrik imap(mclay): index->filepath: %/home/mclay/mail/.imap/INBOX/.imap.index% Apr 26 17:06:51 jedrik imap(mclay): index->control_dir: %/home/mclay/mail/.imap/INBOX% Apr 26 17:06:51 jedrik imap(mclay): open() failed with mbox file : No such file or directory Apr 26 17:06:51 jedrik imap(mclay): index->mailbox_path: %% Apr 26 17:06:51 jedrik imap(mclay): index->dir: %/home/mclay/mail/.imap/INBOX% Apr 26 17:06:51 jedrik imap(mclay): index->filepath: %(in-memory index for )% Apr 26 17:06:51 jedrik imap(mclay): index->control_dir: %/home/mclay/mail/.imap/INBOX% Apr 26 17:06:51 jedrik imap(mclay): stat() failed with mbox file : No such file or directory Any ideas? Thanks

2 1

[Dovecot] Newbie Q: Setting up under linux: Spool directory.
by Robert McLay 26 Apr '04

26 Apr '04

I am trying to set up dovecot under linux. (RH9 if it matters). I'm having trouble having it find the mail that is already delivered. What I would like is that mail is delivered by fetch mail to /var/spool/mail/mclay (that me) then have dovecot find it. I'm sure that I have not set the dovecot.conf file correctly. The documentation is unclear as to what "mbox" is and "INBOX" is. I have tried having default_mail_env unset and with the following: default_mail_env = mbox:/var/spool/mail/%u:INBOX=:/home/%u/Maildir What I get when I talk to it directly is: $ telnet localhost imap Trying 127.0.0.1... Connected to localhost Escape character is '^]'. * OK dovecot ready. A00002 LOGIN mclay "xxxxxx" A00002 OK Logged in. A00003 SELECT INBOX A00003 NO Internal error [2004-04-26 12:56:03] So could a kind sole point me in the right direction? Thanks

2 1

[Dovecot] syslog() logging problems
by James Moser 26 Apr '04

26 Apr '04

was wondering if anyone else has had problems with dovecot logging to syslog? When I start the server it works fine, then after an hour or so it stops.. restarting the server always makes it work again. -- James L Moser james(a)powweb.com PowWeb Hosting http://www.powweb.com /(bb|[^b]{2})/, that is the Question. mysql>SELECT * FROM user WHERE clue > 0; Empty set (0.03 sec) Health is merely the slowest possible rate at which one can die... Health nuts are going to feel stupid someday, lying in hospitals dying of nothing...

2 3

[Dovecot] shared folders?
by Gareth J. Greenaway 26 Apr '04

26 Apr '04

Greetings, I saw mention in results from a google search that there was some support in dovecot CVS for shared folders, is there some docs on how to use them? Provided there is in fact support for them in CVS. Thanks. -- Gareth J. Greenaway | gareth(a)wiked.org SCLUG - Simi Conejo Linux Users Group http://www.sclug.org

3 2

RE: [Dovecot] triggering multiple actions on pop-3 request
by Julian Melville 26 Apr '04

26 Apr '04

> The reason for this is so that the messages > retrieved by fetchmail can be filtered via an anti spam > service before depositing them into the inbox. How about just running fetchmail in daemon mode, so it's polling for messages instead of running on demand? Then you don't need to worry about any special integration issues. Julian.

4 7

[Dovecot] RE: Missed config option
by Alex S Moore 26 Apr '04

26 Apr '04

I am trying to sync a set of maildir folders from a dovecot server and a different imap server on a different host. Using a perl tool called imapsync. The tool says the following about the two servers capabilities: >From capability : IMAP4rev1 SORT THREAD=REFERENCES MULTIAPPEND UNSELECT LITERAL+ IDLE CHILDREN LISTEXT LIST-SUBSCRIBED To capability : IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA IDLE ACL ACL2=UNION No NAMESPACE capability in imap server sws601.mcsun.local Give the separator character with the --sep1 option The From server sws601.mcsun.local is dovecot. What did I miss that causes the NAMESPACE capability to not be seen from dovecot? What is the separator character? Thanks, Alex --

2 2

[Dovecot] imap errors filtering folders with evolution
by Brent Hills 26 Apr '04

26 Apr '04

Hello, I posted earlier to the Ximian Evolution Users list. It was suggested I follow up in relation to dovecot. They also indicated the timestamp in the error message was coming from dovecot. When filtering a folder on a dovecot (0.99.10) imap server with Evolution version 1.46 I receive: Error while 'Filtering Folder' Imap command failed internal error [YYYY-MM-DD HH:MM:SS] The timestamp seems to be the current time. The filters used are primarily move to folder where the destination folder is another imap folder on the same server. The error can be reproduced reliably if I select a large number of email to filter. There are about 10 filters all moving to different folders based on criteria. If I select smaller number of email the error occurs but less predictably. Eventually, it will filter all the email so its not a particular one that it hangs up on. Is anyone familiar with this issue? Brent Hills.

2 1

[Dovecot] dovecot dies - mabye a clue?
by Steven Stern 26 Apr '04

26 Apr '04

Dovecot died twice today. This was in the maillog: Apr 9 17:50:27 ciscy pop3-login: RAND_bytes() failed: error:24064064:random number generator:SSLEAY_RAND_BYTES:PRNG not seeded Apr 9 17:50:27 ciscy dovecot: Login process died too early - shutting down I think I can cause it to happen reliably and I'm asking for other to test this scenario: Open several terminal windows. In each, type "telnet 127.0.0.1 110". Wait for the dovecot POP prompt and do nothing. After each times out, up-arrow and try again. Sometime in the next hour, dovecot will die. -- Steve

2 1

[Dovecot] file permissions help!
by smk 26 Apr '04

26 Apr '04

Hi all! Ran into a problem and hopefully i can get some help. OK here is my set up: - dovecot-0.99.10.4 + MySQL patch. - Redhat 9 The authentication part works just fine. It gives me the following entry in the log file: imap-login: "Apr 12 22:15:10 "Info: Login: USER(a)DOMAIN.com [127.0.0.1] But there is a problem with dovecot reading the mbox file (I think). In the error file I get this entry: imap(USER(a)DOMAIN.com): "Apr 12 22:15:10 "Fatal: Failed to create storage with data: /export/htdocs/DOMAIN.com/mail/USER dovecot: "Apr 12 22:15:11 "Error: child 18613 (imap) returned error 89 Of course the user and domain info was changed. I am out of ideas but thats not to say its something easy or something I completely looked over. This is how I compiled dovecot: CPPFLAGS="-I/usr/local/mysql/include/mysql -DPASSDB_MYSQL -DUSERDB_MYSQL" \ LDFLAGS="-L/usr/local/mysql/lib/mysql/ -lmysqlclient" \ \ ./configure \ --prefix=/usr/local/imapd \ --disable-ipv6 \ --without-pop3d \ --without-ssl \ --with-storages=mbox \ --enable-debug thanks in advance. Scott

2 1

[Dovecot] Problem with flags
by Jeff Hoskinson 26 Apr '04

26 Apr '04

Greetings! I'm having a problem with flags not working correctly. I'm using Mozilla Thunderbird as my mail client, and Dovecot 0.99.10.4 as part of Debian on a Sparc box. The thing that doesn't seem to be working right is Thunderbird's Label feature, which uses custom IMAP flags. I noticed that once I labeled a message, I couldn't un-label it. I recorded this exchange between Thunderbird and Dovecot while using the Label/None command on a message: 5235 uid store 35 -Flags ($Label1 $Label2 $Label3 $Label4 $Label5) * 35 FETCH (FLAGS (\Answered \Seen NonJunk $Label4 $Label5) UID 35) 5235 OK Store completed. Even though Thunderbird is sending the -Flags command for all its custom flags, the message is still retaining two of those flags. Just out of curiousity, I tried changing the flag of that same message to something different, and recorded this exchange: 5259 uid store 35 +Flags ($Label2) * 35 FETCH (FLAGS (\Answered \Seen NonJunk $Label4 $Label2 $Label5) UID 35) 5259 OK Store completed. 5260 uid store 35 -Flags ($Label1 $Label3 $Label4 $Label5) * 35 FETCH (FLAGS (\Answered \Seen NonJunk $Label4 $Label2 $Label5) UID 35) 5260 OK Store completed. So it seems the +Flags command works, but not the -Flags? Or does it have something to do with sending more than one flag at a time? Any help would be appreciated. Thanks, -- Jeff

2 1

[Dovecot] [OT] Is there a secure reverse IMAP proxy
by Sven Kirmess 25 Apr '04

25 Apr '04

This question is off topic. I ask this list because the question is related to security and IMAP and I guess the people in this list know a lot about both of that. Is there a secure reverse proxy for the IMAP protocol? Something you can install on a bastion host which checks the IMAP traffic before forwarding it to the internal IMAP server? There are these proxies for WebMail to IMAP connections but as far as I can tell they were not created for security reasons and not with security as primary goal. Sven

3 2

[Dovecot] SSL Ciphers
by John Wentworth 25 Apr '04

25 Apr '04

I have dovecot running as a pop3s server on port 995 it works great with sendmail and I run nessus to check security issues nessus reports this The SSLv2 server offers 3 strong ciphers, but also 0 medium strength and 2 weak "export class" ciphers. The weak/medium ciphers may be chosen by an export-grade or badly configured client software. They only offer a limited protection against a brute force attack Solution: disable those ciphers and upgrade your client software if necessary I have previously disabled weak ciphers in apache but cannot figure out how to disable the weak ciphers in dovecot Any help would be appreciated john

2 1

[Dovecot] problems with squirrelmail and TLS (debian unstable)
by Amelia A Lewis 25 Apr '04

25 Apr '04

Heylas, So, okay, I've had this lovely IMAP server running, and adore the ease of configuration, among other things. Problem, though. I'm trying to set up SquirrelMail, so that some folks with accounts on my box can use it without having to set up a proper imap client (or can check mail when they're at a cafe, or like that). However, I *won't* turn off the disable_plaintext_auth, 'cause I'm damned if I'll set up a box that asks people to send passwords in the clear, and there *are* people using imap. Dovecot cannot, currently, be configured to permit plaintext on localhost while requiring Something Better from the rest of the world. This becomes a problem with SquirrelMail, which can't cope with TLS. It just barfs. Looking at bug reports in debian, this has already been noticed, and the maintainer there (and the maintainers of SquirrelMail) considers this a non-problem, 'cause, they say, you shouldn't be using TLS with webmail. Is there a way to set up, for instance, two instances of dovecot, running on different ports, so that one listens to the external interface and the other listens to localhost? I don't much like the idea, but how would I go about doing this? Two copies of dovecot.conf and a command-line switch? Amy! -- Amelia A. Lewis amyzing {at} talsever.com Yankees are compelled by some mysterious force to imitate Southern accents and they're so damn dumb they don't know the difference beween a Tennessee drawl and a Charleston clip. -- Rita Mae Brown, "Rubyfruit Jungle"

4 4

[Dovecot] error dropping root group priv
by Thomas Abthorpe 24 Apr '04

24 Apr '04

Good morning all, I am new to this list. I have been running FreeBSD 5.1 with dovecot successfully for about a year. Just recently, I built a new machine with 5.2.1-p5 on the Intel platform with dovecot-0.99.10.4_2. When I use the same configuration options on the new machine, I get Apr 24 10:53:59 standrew pop3-login: Login: tabthorpe [172.16.1.100] Apr 24 10:53:59 standrew pop3(tabthorpe): We couldn't drop root group privileges Apr 24 10:53:59 standrew dovecot: child 44134 (pop3) returned error 89 Any suggestion? Thanks in advance. Thomas -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. Postmaster http://www.stthomasanglican.org

1 0

[Dovecot] SSL Ciphers
by John Wentworth 23 Apr '04

23 Apr '04

I have dovecot running as a pop3s server on port 995 it works great with sendmail and I run nessus to check security issues nessus reports this The SSLv2 server offers 3 strong ciphers, but also 0 medium strength and 2 weak "export class" ciphers. The weak/medium ciphers may be chosen by an export-grade or badly configured client software. They only offer a limited protection against a brute force attack Solution: disable those ciphers and upgrade your client software if necessary I have previously disabled weak ciphers in apache but cannot figure out how to disable the weak ciphers in dovecot Any help would be appreciated john

1 0

[Dovecot] SSL Ciphers
by John Wentworth 23 Apr '04

23 Apr '04

I have dovecot running as a pop3s server on port 995 it works great with sendmail and I run nessus to check security issues nessus reports this The SSLv2 server offers 3 strong ciphers, but also 0 medium strength and 2 weak "export class" ciphers. The weak/medium ciphers may be chosen by an export-grade or badly configured client software. They only offer a limited protection against a brute force attack Solution: disable those ciphers and upgrade your client software if necessary I have previously disabled weak ciphers in apache but cannot figure out how to disable the weak ciphers in dovecot Any help would be appreciated john

1 0

[Dovecot] Is dovecot distributed with RHEL 3.0
by Avery 20 Apr '04

20 Apr '04

I can't seem to find out if dovecot is packaged with RHEL 3.0. It seems redhat makes it hard to find what packages you get when you purchase their RHEL. Does anyone know if dovecot is disributed with Red Hat Enterprise Linux ES 3.0? I know dovecot is distribured with redhat 9.0 and fedora. Thanks, -- Avery

4 3

[Dovecot] configuring dovecot for NIS (w/ pam)
by Yedidia Klein 20 Apr '04

20 Apr '04

Hi, I am trying to start using dovecot on a linux machine. I config it to auth w/ my passwd/shadow and it worked perefectly. I'm not getting to config it to work with my SUN NIS (not +) As I understood I must use PAM for this, I tried to config it w/o any success... do someone has a config file/ pam config for this ? thanks --Yedidia

1 0

[Dovecot] RE: dovecot Digest, Vol 12, Issue 21
by Alban Dani 20 Apr '04

20 Apr '04

Hi Adrian, You are right. I had a space after the .1. Now dovecot is listening fine on 127.0.0.1. Thanks a lot. I would have never thought of it. Alban Date: Tue, 20 Apr 2004 08:37:21 +0200 From: Adrian Ulrich <dovecot(a)blinkenlights.ch> Subject: Re: [Dovecot] Can't resolve address 127.0.0.1 To: dovecot(a)dovecot.org Message-ID: <20040420083721.1d1a4323.dovecot(a)blinkenlights.ch> Content-Type: text/plain; charset=US-ASCII Hello, > imap_listen = 127.0.0.1 Check if you have a space after .1: 'imap_listen = 127.0.0.1' maybe not the same as 'imap_listen = 127.0.0.1 ' bye

1 0

Re: [Dovecot] Can't resolve address 127.0.0.1
by Alban Dani 20 Apr '04

20 Apr '04

Rick thanks for the message, -I have not done any changes to the default nsswitch.conf. I checked and the entry hosts: files dns is there -127.0.0.1 localhost entry is in the /etc/hosts file. -ifconfig shows that the interface is up and I can successfully ping it by name ( ping localhost ). What else can be wrong. I am totally lost here. Alban Rick Johnson wrote: >Alban Dani wrote: >> Hi , >> >> I recently installed Fedora Core 1. >> >> Installed postfix on it and that is running fine. >> >> I am trying to get dovecot to run and I have changed only the following >> line from the default dovecot.conf : >> >> imap_listen = 127.0.0.1 since I'd like to install squirrelmail later on. >> >> Now when I try to start dovecot I get "Starting Dovecot Imap: Fatal: >> Can't resolve address 127.0.0.1 : Name or service not known" > >Does /etc/hosts still contain an entry for localhost? > >Does /etc/nsswitch.conf still reference files for name resolution? > >Is the interface lo active? (run ifconfig to find out) > >-Rick > >-- >Rick Johnson, RHCE #807302311706007 - rjohnson(a)medata.com >Linux/Network Administrator - Medata, Inc. >PGP Public Key: https://mail.medata.com/pgp/rjohnson.asc >

2 1

[Dovecot] Wiki: virutal user with Sendmail and OpenLDAP
by Zoong Pham 20 Apr '04

20 Apr '04

In the Wiki, section 2, "Virtual user support with OpenLDAP", does the example apply to non Sendmail? If that's the case, can someone post a quick guide about setup virtual user with Sendmail. I use OpenBSD-3.4, BTW. TIA, Zoong

1 0

[Dovecot] Can't resolve address 127.0.0.1
by Alban Dani 19 Apr '04

19 Apr '04

Hi , I recently installed Fedora Core 1. Installed postfix on it and that is running fine. I am trying to get dovecot to run and I have changed only the following line from the default dovecot.conf : imap_listen = 127.0.0.1 since I'd like to install squirrelmail later on. Now when I try to start dovecot I get "Starting Dovecot Imap: Fatal: Can't resolve address 127.0.0.1 : Name or service not known" Can anybody help me? Alban

2 1

[Dovecot] configuration problem.. with passwd
by Kartik Vaidyanathan 19 Apr '04

19 Apr '04

Hi i was trying to configure dovecot. Under the authentication section i have set the auth_passdb=/etc/passwd auth_user=root auth_userdb=/etc/passwd But it gives Error in configuration file /etc/dovecot.conf line 398 :missing value which points to auth_passdb=/etc/passwd in the file. Firstly do i need setup some other parameters I want to follow the most simple authentication process. Please advice. thanks

2 1

[Dovecot] adding new user to dovecot
by Kartik Vaidyanathan 18 Apr '04

18 Apr '04

Hi, Your mail was very insightful. You have stated in you mail as follows .. "But I think they create virtual users in database systems for email, I can't imagine all of the users they have are in one passwd file on one tiny machine." a. What do you mean by virtual users. b. How does one link them to a mailbox. Very frankly i am confused... 1.Well lets say i have a user who wants to create a new group say GROUP1.Lets say i have users who want to create GROUP1(a)pigeonhole.com or GROUP2(a)pigeonhole.com .This group name will be entered in my JSP page, now what do i have to do to create the group. 2.How do i see to that anyone who sends a mail to GROUP2@pigeonhole receives it in it mailbox( Firstly does the group have a mails box in the groups name).Will one create a account(mailbox) for the group or how is it done. 3.Lastly I actually want to create a mailing List manager. Please advice on how to go about it. Regards Kartik On Sun, 18 Apr 2004 Wouter Van Hemel wrote : >On Fri, 16 Apr 2004, Kartik Vaidyanathan wrote: > > > Hi, > > > > I have actually configured dovecot because i required a mail server in > > order to build a mailing list manager.A mail list manager is something > > in the likes of yahoogroups, where each group in my case must have a > > mailbox. > > > >You need a MTA, such as postfix, qmail, sendmail, exim, etc. It's more >important than an imap server for what you want to do. > >Actually, I don't really understand why you need an imap server when >making a mailinglist manager. > > > 1. I am using Debian OS. > > The software that i am creating , which is going developed in JSP, will > > take a new users name and password and create a account for him by > > executing a shell script in my linux machine.I assume yahoo also does > > something similar to this to create new mail boxes for any new > > user.Please correct me if i am wrong. > > > >I don't know, I don't work at yahoo. But I think they create virtual users >in database systems for email, I can't imagine all of the users they have >are in one passwd file on one tiny machine. > > > In fact this very mail that i have received from you is because i have > > subscribed to the dovecott mailing list. How do you think dovecott has > > been able to accomplish this. Is it not because that dovecott has a > > mailbox in the group name "dovecott" in some system, that internally > > does the sending of mails to all those in the groups refering to some > > database. > > > >Dovecot doesn't have anything to do with that. It's mostly the MTA, aided >by the mailing list manager. > >Here's how majordomo (popular mailinglist manager) works: > >Bob wants to subscribe to the pigeonhole mailinglist. He emails or enters >his email address in a web form so it ends up in a database file with all >the other users on that list. The mailinglist manager's job is to take >care of adding (or removing) email addresses to (from) that file; it adds >Bob's address. > >When an email is sent to pigeonhole(a)pigeonhole.org, the mailer daemon >(MTA) receives this email, and instead of delivering it to a local user, >either it (1) delivers it to a pipe - it passes the email to the >mailinglist software, which then just generates an email that replaces the >original destination with the list of email addresses; or (2) the mailer >daemon itself forwards the email by alias expansion to the list of email >addresses the mailinglist software made. > >In the former case, the mailinglist manager reads the original message and >replaces the address with all those in the list's database; in the latter >case, basically the only thing a mailinglist manager does, is taking care >of an error-free database file with email addresses so the MTA can forward >the email to the addresses in this file. > >Because Bob's email address is in this file, his address will be inserted >in the headers of the message, and he will receive the email. > > > 2.Will the mail server support me in anyway by giving me some > > functionality to add users, thereby creating maildir's (imap) for the > > users. > > > >No, adding users is not the job of a mail server daemon. Or of an imap >server. Usually, you don't allow people to add users to your system, for >obvious reasons. > >If you want to add users to a mailing list, you don't need accounts for >those users, only when you also want to provide them with an email address. > >What do you want to do: provide email addresses, or a mailinglist manager? > > > 3.Dont I need to know the admin login and passwd, to create users? > > > >Yes, ofcourse. Unless your users are in a database server, in that case >you need the ability to add records to that database. > >(Shared webhosting accounts usually allow adding virtual users, if that's >the reasoning behind your question.) > > > 3.Lastly i know this is not that prevalent a question -> I was told mail > > man does a similar job as to what my software will do.Do you know how > > mailman works (or even yahoogroups)?. > > > >Not precisely, but pretty much like I said above. You can check out the >documentation and source code of said software. > >Yahoogroups probably uses custom written software, but still based on the >simple approach of a mailinglist manager taking care of a list of >subscribers, and the mailer daemon either itself or by aid of an external >program multiplicating the recipients. > > >A mailinglist manager has nothing to do with Dovecot. Dovecot has nothing >to do with *sending* email, only with retrieving it from a system with >IMAP of POP. It's the end-of-the-line for emails, delivery to final >destination; it does not forward or duplicate. > > > Please enlighten me on the above issues. > > Thanks a lot for you time. > > > >I'll send you the bill later. ;) > > > Regards > > Kartik > > > > > > > > >

2 1

Re: Re: [Dovecot] adding new user to dovecot
by Kartik Vaidyanathan 18 Apr '04

18 Apr '04

Hi, Thanks a lot for the mails.Well one major doubt that was prevailing was that do i need to create a system account for each person in order to send/receive mails, and from both(Sven Kirmess & Johannes Berg ) your mails i gather it is a must. But Is there a workaround to this? I have actually configured dovecot because i required a mail server in order to build a mailing list manager.A mail list manager is something in the likes of yahoogroups, where each group in my case must have a mailbox. 1. I am using Debian OS. The software that i am creating , which is going developed in JSP, will take a new users name and password and create a account for him by executing a shell script in my linux machine.I assume yahoo also does something similar to this to create new mail boxes for any new user.Please correct me if i am wrong. In fact this very mail that i have received from you is because i have subscribed to the dovecott mailing list. How do you think dovecott has been able to accomplish this. Is it not because that dovecott has a mailbox in the group name "dovecott" in some system, that internally does the sending of mails to all those in the groups refering to some database. 2.Will the mail server support me in anyway by giving me some functionality to add users, thereby creating maildir's (imap) for the users. 3.Dont I need to know the admin login and passwd, to create users? 3.Lastly i know this is not that prevalent a question -> I was told mail man does a similar job as to what my software will do.Do you know how mailman works (or even yahoogroups)?. Please enlighten me on the above issues. Thanks a lot for you time. Regards Kartik

3 3

[Dovecot] adding new user to dovecot
by Kartik Vaidyanathan 15 Apr '04

15 Apr '04

Hi, This is from your documentation Creating new users ------------------ Dovecot is interested in only one thing - being able to find the user's mail directory. With maildir you need to do mkdir ~user/Maildir, with mbox mkdir ~user/mail. what does ~ refer to. Pardon my ignorance in unix, i am relatively new to unix. Does not ~ refer to the user account in which you have logged in. So does that mean that maildir folder exist for only user accounts that already exist.My intention for asking the above is that i have a java program running, that will take a new users name and password, so with that can i create a mailbox for that person , or does the admin have to create an user account for that person , so that his maildir folder can be created. Please clarify my understanding of how it workds.. Thanks

3 2

RE: [Dovecot] I added a "SQ and Dovecot FAQ" on the SQ website
by Avery Day 14 Apr '04

14 Apr '04

<quote who="Julian Melville"> >> Maybe someone can verify my setup procedure really quick. > > Looks the same as mine except for saying that the server is like > Courier... I left that bit blank and haven't had any hassles. What does > that change I wonder? > > Cheers, > > Julian. > > Actually I stole alot of the procedure from some website. Im not taking credit for anything I'm just doing the dirty work :) If you do perl conf.pl and change the IMAP server to courier it tells you everything that it changes --------------------------------------------------------- Please select your IMAP server: cyrus = Cyrus IMAP server uw = University of Washington's IMAP server exchange = Microsoft Exchange IMAP server courier = Courier IMAP server macosx = Mac OS X Mailserver quit = Do not change anything Command >> courier imap_server_type = courier default_folder_prefix = INBOX. trash_folder = Trash sent_folder = Sent draft_folder = Drafts show_prefix_option = false default_sub_of_inbox = false show_contain_subfolders_option = false optional_delimiter = . delete_folder = true ---------------------------------------------------------- -- Avery

1 0

RE: [Dovecot] I added a "SQ and Dovecot FAQ" on the SQ website
by Julian Melville 13 Apr '04

13 Apr '04

> Maybe someone can verify my setup procedure really quick. Looks the same as mine except for saying that the server is like Courier... I left that bit blank and haven't had any hassles. What does that change I wonder? Cheers, Julian.

1 0

[Dovecot] Calling gentoo maintainers
by Zach Bagnall 13 Apr '04

13 Apr '04

If anyone knows someone with CVS access can they please take another look at http://bugs.gentoo.org/show_bug.cgi?id=22080. It has been in bugzilla for nearly nine months. Would like to see this in portage - masked is fine - so at least everyone is working off the same file. Cheers Zach.

2 2

RE: [Dovecot] I added a "SQ and Dovecot FAQ" on the SQ website
by Zoong Pham 13 Apr '04

13 Apr '04

Is that dovecot in your FAQ serving mbox or mdir format? Thanks, Zoong -----Original Message----- From: Avery Day [mailto:schrock@dayzed.com] Sent: Tuesday, 13 April 2004 12:07 PM To: dovecot(a)dovecot.org Subject: [Dovecot] I added a "SQ and Dovecot FAQ" on the SQ website On the Squirrelmail website I setup in the FAQ a quick install guid on how to get squirrelmail to work with Dovecot. Maybe someone can verify my setup procedure really quick. Maybe someone thinks this is wrong. Also if you have something to add please do so. No one has bothered to do this before so I took it upon my self. Here is the link in the FAQ its about 8 lines down http://www.squirrelmail.org/wiki/en_US/InstallingSquirrelMail Here is where the link takes you http://www.squirrelmail.org/wiki/en_US/SquirrelMailAndDovecotIMAP Thanks -- Avery

2 1

[Dovecot] I added a "SQ and Dovecot FAQ" on the SQ website
by Avery Day 13 Apr '04

13 Apr '04

On the Squirrelmail website I setup in the FAQ a quick install guid on how to get squirrelmail to work with Dovecot. Maybe someone can verify my setup procedure really quick. Maybe someone thinks this is wrong. Also if you have something to add please do so. No one has bothered to do this before so I took it upon my self. Here is the link in the FAQ its about 8 lines down http://www.squirrelmail.org/wiki/en_US/InstallingSquirrelMail Here is where the link takes you http://www.squirrelmail.org/wiki/en_US/SquirrelMailAndDovecotIMAP Thanks -- Avery

1 0

[Dovecot] Dovecot for production environment
by Avery Day 11 Apr '04

11 Apr '04

Sorry if this question has been asked before I looked through some of the archives before posting this. I am considering using dovecot on a small 35 user environment (only around 6 gigs of email) that will be primarly be used with squirrelmail for the MUA. I have been using dovecot for a few weeks now and really like it. It is a big improvement over uw-imap thats for sure. I was wondering how many people in this mailing list are using dovecot for a production email server, and why you chose to use dovecot over cyrus or courier. Or maybe someone feels that dovecot isnt ready for this type of thing just yet. I am all ears so please feel free. Thanks -- Avery -- Avery Day

10 18

[Dovecot] Missing mail file - Internal Error
by James Moser 10 Apr '04

10 Apr '04

I have noticed that if the user does not already have a mail file, for instance in /var/mail, the IMAP server responds with Internal Error, and the pop server imediately terminates the connection. Is this something I have configuered wrong? Are there any work arounds for this... /var/mail is owned by root:mail with permissions 0775... -- James L Moser james(a)powweb.com PowWeb Hosting http://www.powweb.com /(bb|[^b]{2})/, that is the Question. mysql>SELECT * FROM user WHERE clue > 0; Empty set (0.03 sec) Health is merely the slowest possible rate at which one can die... Health nuts are going to feel stupid someday, lying in hospitals dying of nothing...

1 0

[Dovecot] blank line at the top of mbox
by KB Digital 10 Apr '04

10 Apr '04

Hello, It seems dovecop pop3 server sometimes inserts a blank line at the top of the mbox. It only happens for certain users not all. I'm not sure why it's doing that. Looking back into the mailing list, I saw the same post in Oct 6, 2003 but there was no reply to it. Is there a patch or fix that i can use to get around the blank line? Thank you. Ken

2 1

[Dovecot] (no subject)
by Avery Day 09 Apr '04

09 Apr '04

Sorry if this question has been asked before I looked through some of the archives before posting this. I am considering using dovecot on a small 35 user enviorment (only around 6 gigs of email) that will be primarly be used with squirrelmail for the MUA. I have been using dovecot for a few weeks now and really like it. It is a big improvement over uw-imap thats for sure. I was wondering how many people in this mailing list are using dovecot for a production email server, and why you chose to use dovecot over cyrus or courier. Or maybe someone feels that dovecot isnt ready for this type of thing just yet. I am all ears so please feel free. Thanks -- Avery

2 1

[Dovecot] Re: Dovecot died due to some SSL related error
by rhr-dovecot＠batky-howell.com 08 Apr '04

08 Apr '04

(Sorry, just joined the list, can't reply in the original message from Feb 4.) > Hi, > Dovecot (pre-compiled version of Fedora Core 1, configured for Maildir) > is running fine for me since a few days. It happened now twice to me > that dovecot died with the following error message in /var/log/maillog: > > Feb 4 11:18:27 hundehuette imap-login: RAND_bytes() failed: > error:24064064:random number generator:SSLEAY_RAND_BYTES:PRNG not > seeded > Feb 4 11:18:27 hundehuette dovecot: Login process died too early - > shutting down > > As these previous log messages indicate the login was working before > without any problem: > Feb 4 11:02:37 hundehuette imap-login: Login: andrea [192.168.2.138] > Feb 4 11:05:56 hundehuette last message repeated 30 times > Feb 4 11:09:02 hundehuette last message repeated 15 times > Feb 4 11:12:08 hundehuette last message repeated 15 times > Feb 4 11:15:15 hundehuette last message repeated 15 times > Feb 4 11:18:21 hundehuette last message repeated 15 times > Feb 4 11:18:26 hundehuette last message repeated 12 times > > Dovecot is running as user "dovecot" who does not have a ~/.rnd file > > Any idea? > > Thanks, > Christof Hi, No idea, but I'm getting the same thing, at least once a day, sometimes several times a day. I tried putting a .rnd file in /var/libexec/dovecot, no help. - Fedora Core 1.0 - dovecot-0.99.10-6 - openssl-0.9.7a-23 - About 20 users, using pop, pops, imap, imaps. I had to run a cron job that checks every minute to see if dovecot is running, and restart it if it isn't. I'd love to get this figured out, though. I see another message about this in the list archives, at the end of January. I'll post if I find anything... Rob

1 1

[Dovecot] vmailmgr
by Alejandro Mery 08 Apr '04

08 Apr '04

hi, does dovecot supports vmailmgr authentication? any recomended reading? and, in a vmailmgr context, what are the benefits of dovecot over courier-imap or bincimap? Best regards, Alejandro Mery

1 0

[Dovecot] Dovecot startup at boottime fails
by Bavo De Ridder 08 Apr '04

08 Apr '04

Hi, I am running dovecot 0.99.10.4 on SuSE 9. I installed it using apt-get from the gwdg repository. The dovecot service is configured to start at boottime in run level 3 and 5. However, it dies immediately with this error (/var/log/mail.err): dovecot: Login process died too early - shutting down Starting the service afterwords from a prompt as root with the command: /etc/init.d/dovecot start works without a glitch. Attached you can find my dovecot.conf and the startup script /etc/init.d/dovecot. I hope someone could shed some light on this issue.

3 6

[Dovecot] dovecot vs. cyrus IMAP?
by Jim Norton 08 Apr '04

08 Apr '04

Hello all, I just learned about dovecot. I am currently using Cyrus IMAP/POP3 with Postfix on a Linux system. The one thing I don't like about Cyrus IMAP is that it doesn't support mail users who have accounts on the system. It uses it's own mailbox format and the users can't be regular system users. It would be nice to have an IMAP/POP3 server that can handle mail for users in /etc/passwd as well as the cyrus 'virtual' user type. Does dovecot only provide access to mail for users in /etc/passwd? Or can one setup email accounts for people that don't have accounts on the system ( in /etc/passwd )? Thanks, -- Jim Norton - http://www.jimnorton.org Recursion; n. see 'Recursion'

2 1

[Dovecot] username and password not from /etc/passwd
by Zoong Pham 08 Apr '04

08 Apr '04

Can dovecot use usernames and passwords not from /etc/passwd and be able to read mails of an user whose username and password are in /etc/passwd ? For example: - Joe Bloke has a local Unix account joe on Unix server mail.example.com - Sendmail on mail.example.com accepts mails for joe(a)example.com and put them in /var/mail/joe - can dovecot use other username/password file or database or directory rather than /etc/passwd to authenticate Joe and let him (once logs in successfully) reading mails in /var/mail/joe ? Ideally, the usernames and passwords that dovecot uses are different with the ones in /etc/passwd. Say, username is joe.bloke(a)example.com That way, Joe doesn't need to know the username and password on the Unix server at all. In summary, I want to have IMAP usernames and passwords totally different from the local Unix usernames and passwords. And users use only IMAP usernames and passwords to read their mails. I use OpenBSD-3.4, Sendmail 8.12.9, dovecot-0.99.10p0 (pre-compiled packaged from OpenBSD). Thanks, Zoong Pham

2 1

Re: [Dovecot] Repeating downloads
by Brian T Glenn 08 Apr '04

08 Apr '04

[You have top-posted your message. Please refrain from doing so on technical mailing lists. It ruins the flow of the conversation as well as making archive difficult to read] [You have sent a personal reply to a mailing list message when it was not warranted. Please keep replies on the list so that everyone can benefit.] On Wed, Apr 07, 2004 at 04:27:01PM -0500, Paul Hanson may have written: > On Wednesday, April 07, 2004 1:14 PM Brian T Glenn wrote: > > That sounds about how POP3 works in my experience. How were you > > expecting it to behave differently? > > Well the only problem is that if they receive a new message, not only do you > get the new message but another copy of ALL messages on the server. A > scenario that I have not experienced with any other POP3 server/client > setup. The correct behavior should be to only download the new message. from doing a search on dovecot and uidl, it seems that dovecot supports these functions, which is the standard way for a pop3 server to announce unique checksums of messages. Whether or not your client software supports this is another matter. -- Brian T Glenn delink.net Internet Services

1 0

[Dovecot] Repeating downloads
by Paul Hanson 07 Apr '04

07 Apr '04

Hey- Just wanna say that I'm really happy with Dovecot, it has worked really well for my small operation. I do have a couple problems I'd just like to bring to everyone's attention for future bugfixes and if there is a solution available. I'm using dovecot-0.99.10-6 with a clean fedora core 1 install. I'm using primarily IMAP with OpenSSL, however a few people use POP3 (over SSL) with outlook 2002 clients. The problem is that with each send and receive another copy of all messages in their Inboxes are downloaded. I have tried closing outlook restarting it etc. nothing seems to help unless I tell outlook to remove all messages from the server then outlook responds with "messages that outlook was attempting to download are no longer on the server." And problem solved. Not a huge deal but others with similar setups may be experiencing the same problems. I have postfix for my MTA, every account uses Maildir. Attached is my dovecot.conf. Thanks a lot!!! -Paul

2 1

[Dovecot] Process died to early
by Steven Stern 07 Apr '04

07 Apr '04

Just went through this again today. Has anyone found a solution? ------------------------------------------------------ After several days of operation, POP connections fail to my server. The log message is Mar 27 15:51:46 ciscy dovecot: Login process died too early - shutting down Linux ciscy.sterndata.com 2.4.22-1.2174.nptl #1 Wed Feb 18 16:38:32 EST 2004 i686 i686 i386 GNU/Linux ]# /usr/sbin/dovecot --version 0.99.10 # /etc/init.d/dovecot status dovecot (pid 6900) is running... Killing the dovecot process, deleting /var/lock/subys/dovecot, and restarting the process gets POP3 and IMAP working again. Suggestions? -- Steve

2 1

[Dovecot] Repeating downloads
by Paul Hanson 07 Apr '04

07 Apr '04

Sorry about the Spam with the dovecot.conf. Here is the intended message. Thanks!! Hey- Just wanna say that Im really happy with Dovecot, it has worked really well for my small operation. I do have a couple problems Id just like to bring to everyones attention for future bugfixes and if there is a solution available. Im using dovecot-0.99.10-6 with a clean fedora core 1 install. Im using primarily IMAP with OpenSSL, however a few people use POP3 (over SSL) with outlook 2002 clients. The problem is that with each send and receive another copy of all messages in their Inboxes are downloaded. I have tried closing outlook restarting it etc nothing seems to help unless I tell outlook to remove all messages from the server then outlook responds with messages that outlook was attempting to download are no longer on the server. And problem solved. Not a huge deal but others with similar setups may be experiencing the same problems. I have postfix for my MTA, every account uses Maildir. Attached is my dovecot.conf. Thanks a lot!!! -Paul

1 0

[Dovecot] dovecot with sendmail
by electron electron 06 Apr '04

06 Apr '04

Hello, Here is an issue. I am trying to make dovecot work with sendmail If I use the default conf file (default_mail_env = ) then the inbox is the file /var/mail/user and a mail folder is created in /home/user directory where it stores all additional imap folders. The problem with this is that I cant have subfolders. If I edit dovecot.conf file and enter default_mail_env = maildir:/var/mail/%1u/%u/Maildir then I can create subfolders, but new emails are not stored in INBOX, but the stay in /var/mail/user. In order to overcome this issue I used procmail .procmailrc: ---------- { :0 Maildir/ } ---------- So now all emails are stored in Maildir format and again with the default dovecot.conf file it works fine. I was wondering if there is an alternative way to do this, without using procmail..just editing the dovecot.conf file. Thank you Regards _________________________________________________________________ MSN 8 with e-mail virus protection service: 2 months FREE* http://join.msn.com/?page=features/virus

2 1

[Dovecot] User authentication
by Pahlevanzadeh Mohsen 06 Apr '04

06 Apr '04

Hi. I installed IMP webmail. I had use MySQL authentication for IMAP. Can i use MySQL for dovecot-imap server? Please guide me.... Yours,Mohsen. ===== ---------DIGITAL SIGNATURE------------------- ///Mohsen Pahlevanzadeh//////// Network administrator & programmer My work phone is : +98216054096-7 My home phone is: +98213810146 My emails is m_pahlevanzadeh(a)yahoo.com My website is: http://webnegar.net ---------------------------------------------------------------- __________________________________ Do you Yahoo!? Yahoo! Small Business $15K Web Design Giveaway http://promotions.yahoo.com/design_giveaway/

2 1

[Dovecot] dovecot not staying up
by Brian T Glenn 06 Apr '04

06 Apr '04

I found one reference to this in the archives via google, but the assistance offered there did not resolve the problem. I am getting the following in the logs: Apr 5 10:21:25 ziegchen dovecot: Dovecot starting up Apr 5 10:21:26 ziegchen dovecot: Auth process died too early - shutting down Apr 5 10:21:26 ziegchen dovecot: child 30091 (auth) returned error 127 Apr 5 10:21:26 ziegchen imap-login: fd_send(-1) failed: Broken pipe This is with SSL on or off, I have tried building the source many different ways, but it behaves the same every time. I even copied the config from a working installation and tried it with that, but to no avail. Any insight would be appreciated. -- Brian T Glenn delink.net Internet Services

2 2

[Dovecot] dovecot not reconnecting to ldap after ldap restart
by Jared 05 Apr '04

05 Apr '04

I upgraded dovecot two weeks ago from 0.99.10-0.rc2 to 0.99.10.4-1woody1 (both from the woody backport packages from braincells.com) Dovecot is using LDAP on a separate machine for authentication. (through stunnel if it matters) At 4:00 am, the LDAP server stops, dumps the ldap database, and then starts back up. Because the LDAP server is stopped, anyone who tries to authenticate during the few seconds will be denied. This isn't a big deal since it's 4:00 am. However, twice in the past two weeks, it appears that if dovecot can't connect to the LDAP server, it loses the ability until dovecot is restarted. It's only happened since I upgraded, and it's only happened twice, presumably when someone was trying to check their mail at the precise moment the LDAP server is down. I get the following entry in mail.err: Mar 30 04:00:18 akbar dovecot-auth: LDAP: ldap_result() failed: Can't contact LDAP server Mar 30 04:00:19 akbar dovecot-auth: LDAP: Can't connect to server: localhost Mar 30 04:00:50 akbar last message repeated 36 times . . . The two times it has happened, ldap is responding properly (all other services we provide which use LDAP still work), stunnel on the dovecot machine is still running, and dovecot is still running, accepting IMAP and POP connections, but failing at the authentication phase. Is there some change or bug in dovecot which would make this happen? Or is there a problem with my set up? Thanks in advance for any ideas. -jared

3 4

[Dovecot] passwd-file maintenance by users, other options
by Mike Brown 04 Apr '04

04 Apr '04

I am using Dovecot to provide IMAP and IMAP+SSL service for my users, but am still using QPopper for POP3 service, wrapped with stunnel for POP3+SSL. I am hesitant to get rid of QPopper because it supports APOP, which encrypts authentication data (both where it is stored, and when it is transmitted), and because APOP passwords can be managed by the users themselves, via the popauth tool that they can run from their shell accounts. I'd like very much to use Dovecot for POP3, but would need to have it be comparable to APOP, where authentication does not involve having user passwords going across the wire in the clear, and especially I need for users to be able to maintain their passwords themselves, preferably with their status as a current user of the system being established without my intervention; I don't want to have to manually keep things in sync with /etc/passwd. Furthermore, it needs to have no conflicts with popular email clients including Mozilla, Outlook, Outlook Express, and Eudora, so unusual authentication mechanisms are not really an option. I've RTFM at http://www.dovecot.org/doc/auth.txt but I don't know how to establish a separate passwd file that would satisfy the requirement that users be able to maintain their passwords themselves. And PAM is a complete mystery to me. So what do you all do? Is there a tutorial somewhere that would help? Thanks, M.

3 2

[Dovecot] Bug fix - message/rfc822 attachments
by Rick Jones 03 Apr '04

03 Apr '04

Greetings I've attached a patch that fixes a bug in Dovecot relating to rfc822 attachments. This problem shows up in Mulberry (which hammers the IMAP protocol more than most!). The problem is that FETCH BODY[n], where "n" is the number for the message/rfc822 part, returns the wrong information. It returns the message without the headers, whereas it should return the entire rfc822 attachment. FETCH BODY[n.MIME] doesn't appear to return the MIME headers for the part either. This happens because the find_part() function always steps down into the child when the type of the part is RFC822. It should only do this if the request is for a sub-part, or for HEADER. Otherwise it should stay at the current level. I have to say the IMAP protocol is a bit perverse in the way implicit nesting of rfc822 messages is handled, which is why this looks somewhat hacky. I don't see a nicer way though. The effect in Mulberry is that certain operations on rfc822 attachments don't work properly, in particular extracting the attachment into a separate message. It also affects message-digest format messages, which will completely lock up Mulberry if one is even present in a mailbox. (It may be that Dovecot itself hangs, I don't know. Once I found that the patch fixed both problems I didn't look any further :) Mulberry doesn't exhibit these problems with other IMAP servers. The attached patch is for the source code of 0.99.10.04. I've looked at the "latest" source, and there is no change in these lines of code, so I guess the bug is still there. -- Best regards Rick Jones

1 0

[Dovecot] SSL error and PostgreSQL
by eLgino 02 Apr '04

02 Apr '04

Hello there, Anyone have a Howto for me how i can configure dovecot to work with a PostgreSQL Database? (the docs are small), i want to use it with Exim4 and i have a error with SSL "imap-login: Can't load private key file /var/dovecot/ssl/private/imapd.pem: error:0906D06C:PEM routine:PEM_read_bio:no start line" i make my cert with this command (i don't like the included script :)) openssl req -nodes -new -x509 -keyout imapd.pem -out imapd.pem -days 3650 or openssl req -nodes -new -x509 -out imapd.pem -days 3650 the pem is file is in the right directory and have "a chmod 700,777 or 600" no one of the this will work. sorry for my poor english and thanks in advance

2 1

[Dovecot] Failed to create storage with data
by Tim Middleton 01 Apr '04

01 Apr '04

Switched from UW-IMAP to dovecot a little while ago. Worked through the namespace hell with current users. But now I've hit another problem I can't seem to figure out. Some webmail (squirrelmail) users noticed that when they tried to login they would jus get this error: ERROR: ERROR : Connection dropped by imap-server. Query: CAPABILITY I discovered in the mail logs the real error was like this: Apr 1 04:28:38 smaug imap(mcfletch): Invalid mbox file /var/mail/mcfletch: No such file or directory Apr 1 04:28:38 smaug imap(mcfletch): Failed to create storage with data: mbox:/var/mail/mcfletch And the error seems to be quite accurate. These are new logins seeing this error, which do not yet have an mbox file. So the question is, why is dovecot not able to deal with this situation? Searching google i saw the suggestoin to one preson that it was actually the ~/mail directory unable to be created, but this is not the case in my test above, as ~/mail already existed for that account. Directory permissions seem okay. /usr/mail is drwxrwxrwt (note: /var/mail is a symlink to /usr/mail on this system). The dovecot setup is fairly default. Platform is FreeBSD 4.9. Authentication is done via system password file. There's no problem accessing/modifying existing mailboxes. I put in a chron job to touch into existance any non-existing mailboxes for everyone in the passwd file periodically, which mostly eliminates the problem. But I'd still like to know why the server is having the problem, if anyone can make any suggestions. -- Tim Middleton | Cain Gang Ltd | "Are the gods not just?" "Oh no, child. x(a)veX.net | www.Vex.Net | What would become of us if they were?" (CSL)

1 0

[Dovecot] Mulberry problem
by Rick Jones 01 Apr '04

01 Apr '04

I've been chasing a problem with Mulberry which now actually seems to be a Dovecot server bug. The problem manifests itself when manipulating embedded rfc822 messages, and the analysis comes down to the fact that a FETCH BODY[2] command returns the same thing as FETCH BODY[2.1]. Both return just the text of the embedded message, whereas FETCH BODY[2] should return everything including the headers (this is what Cyrus Daboo came up with after looking at the Mulberry log). I'm not sure exactly what version of Dovecot I'm running, it's what comes with SME Server 6.0. Has this by any chance been fixed? I have another Mulberry problem which might be related, but I'll save that for another post :) -- Regards Rick Jones

1 0

[Dovecot] Rogue child imap processes when using Mac imap clients
by darren david 31 Mar '04

31 Mar '04

hi all- I am currently running dovecot 0.99.10p2 on OpenBSD-3.4-snapshot. It has been very stable, but I have recently noticed that I am having problems when checking IMAP-SSL mail with Mac OS X clients. There are not problems using Mozilla or Outlook on Windows, but Mac clients (Thunderbird, Mozilla, Mail.app) all exhibit the same behavior - they can check and send mail, but I end up with a single, rogue child imap process on the server that pins the cpu that i have to 'kill -9' to clear out. Is this a Mac problem or a Dovecot problem? I'm not even sure what to look for in the logs... Thanks, Darren David

6 9

[Dovecot] New indexing code
by Timo Sirainen 31 Mar '04

31 Mar '04

Sorry about the lack of replies to questions in this list. Work on the new indexing code has taken way too long, but it's finally beginning to be get near usable state. After it's fully working, I'll start being more active here again. If you're interested (as a developer, normal users shouldn't even try playing with it yet), you can checkout "newdove" module from Dovecot CVS. Many things are still broken, but basic maildir support is almost working with the exception of expunges (which probably break badly) and custom flags (not implemented). And the maildir syncing code isn't optimized yet. Don't try it with any of your real maildirs, it might lose your mails. Some of the new great things in it: - Mailbox API which is a lot more easier to use than before, allowing a lot of things that previously were difficult to implement - Less IMAP-specific than before - Should work extremely well with shared mailboxes with tons of users I'm hoping to get a usable alpha release out of it within few weeks.

2 1

[Dovecot] Fatal: RAND_bytes() failed
by Anders Nielsen 30 Mar '04

30 Mar '04

This morning dovecot died with the following messages in the errorlog. Any solution to this problem? I am using Fedora Core 1 on a SMP i686 box. imap-login: Mar 30 08:08:00 Fatal: RAND_bytes() failed: error:24064064:random number generator:SSLEAY_RAND_BYTES:PRNG not seeded dovecot: Mar 30 08:08:00 Error: Login process died too early - shutting down dovecot: Mar 30 08:08:00 Error: child 21354 (login) returned error 89 Best regards Anders Nielsen -- Anders Nielsen <anielsen(a)diku.dk>

2 1

[Dovecot] (no subject)
by tom＠replic8.net 30 Mar '04

30 Mar '04

hello, suddenly, dovecot stopped working. login succeeds, then no mail is displayed to the user. i upgraded to latest nightly, no change. ==snip== Mar 30 10:17:31 commbox imap-login: Login: user [192.168.99.66] Mar 30 10:17:31 commbox imap(user): Buffer full (49) Mar 30 10:17:31 commbox dovecot: child 745 (imap) killed with signal 6 ==snap== some minutes later i tried another client - i was using php-based horde/imp webmail system first (php uses cclient2000 for imap which is based on uw-imap afaik) - using syslphed-0.99 things work fine. strange. any hints on how to debug this more? -- thanks, TOM

1 0

[Dovecot] error starting dovecot
by Avery Day 29 Mar '04

29 Mar '04

I am running redhat 9.0. I have been using uw-imap for some time now and wanted to try our dovecot. After installing dovecot and trying to start it up I am getting an error ------------------- Starting IMAP daemon (dovecot): Fatal: Can't use SSL certificate /usr/share/ssl/certs/dovecot.pem: No such file or directory ------------------- Thanks for any help.

2 2

[Dovecot] UW-IMAP -> Dovecot : patch to remove nasty "internal messages" from UW-IMAP ?
by Xavier Beaudouin 29 Mar '04

29 Mar '04

Hello there, We want to move from UW-IMAP to Dovecot (mbox format), works like a charm, but UW-IMAP has that bloody habbit to make a stupid message in all his mailbox files : From MAILER-DAEMON Thu Apr 19 10:30:01 2001 Date: 19 Apr 2001 10:30:01 +0200 From: Mail System Internal Data <MAILER-DAEMON(a)mailhub2-vil.isdnet.net> Subject: DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA Message-ID: <987669001(a)mailhub2-vil.isdnet.net> X-IMAP: 0987630138 0000000001 Status: RO This text is part of the internal format of your mail folder, and is not a real message. It is created automatically by the mail system software. If deleted, important folder data will be lost, and it will be re-created with the data reset to initial values. Is there any patch / trick / whatever to avoid that such "stupid" message to be not served by dovecot ? Thanks, /Xavier

5 7

[Dovecot] IMAP error with squirrelmail - how to debug?
by Raymond Scholz 29 Mar '04

29 Mar '04

When moving messages with squirrelmail (or kmail), I get the following error: ERROR : Could not complete request. Query: COPY 3 "INBOX" Reason Given: Unexpected EOF According to the config I switched on rawlog: # This would write rawlogs into ~/dovecot.rawlog/ directory: mail_executable = /usr/lib/dovecot/rawlog /usr/lib/dovecot/imap rawlog.c was altered in order to have /tmp as HOME. But I see no logfiles being generated. Environment: lastest dovecot from CVS, vpopmail and local users (error with both types). Another issue: Ocassionally the auth process dies: Feb 26 21:08:49 servername dovecot: child 28641 (auth) killed with signal 11 Cheers, Ray -- Raymond Scholz - rscholz(a)zonix.de - GnuPG/PGP - http://www.zonix.de/

3 4

[Dovecot] dovecot tls configuration
by Johannes Berg 29 Mar '04

29 Mar '04

Hi, I looked through the web and the list archives, but couldn't find how to set up the following: - dovecot with ssl/tls enabled - login from localhost allowed with and without tls - login from remote hosts only allowed via tls Is that possible at all? I'm using debian/unstable so its version 0.99.10.4-3. Thanks, johannes -- http://www.sipsolutions.de/ Key-ID: 9AB78CA5 Johannes Martin Berg <johannes(a)sipsolutions.de>

4 4

[Dovecot] Process died to early
by Steven Stern 27 Mar '04

27 Mar '04

After several days of operation, POP connections fail to my server. The log message is Mar 27 15:51:46 ciscy dovecot: Login process died too early - shutting down Linux ciscy.sterndata.com 2.4.22-1.2174.nptl #1 Wed Feb 18 16:38:32 EST 2004 i686 i686 i386 GNU/Linux ]# /usr/sbin/dovecot --version 0.99.10 # /etc/init.d/dovecot status dovecot (pid 6900) is running... Killing the dovecot process, deleting /var/lock/subys/dovecot, and restarting the process gets POP3 and IMAP working again. Suggestions? -- Steve

1 0

[Dovecot] RE: Lock problem - take 2
by Alex S Moore 21 Mar '04

21 Mar '04

I deleted the index folder to fix a lock problem described on my previous post. I still cannot access the folder. Now, I have a file in the maildir folder named dovecot-uidlist.lock that must be corrupt. How do I fix this? I can remove this particular maildir folder and there is no great loss. But I want to know how to fix it, in case this problem occurs on an important folder. Thanks, Alex

1 0

[Dovecot] RE: Locking problem
by Alex S Moore 20 Mar '04

20 Mar '04

Running dovecot on Solaris 8 sparc with SylpheedClaws as the MUA. I tried moving to many messages from a folder to my maildir folder, which is a local directory on the dovecot server. Now, I cannot open the folder due to this message: 'Mar 20 10:26:15 sws601.mcsun.local imap(amoore): [ID 702911 mail.error] Timeout while waiting for release of shared fcntl() lock for index file /var/indexes//amoore/.Spam.Spam Archive/.imap.index' How do I get the lock released? I changed some timeout settings in dovecot.conf, but that did not help. Every time that I click this particular folder in my MUA, the screen locks up. Thanks, Alex

1 0

[Dovecot] Case insensitive user names
by andrew fresh 19 Mar '04

19 Mar '04

I am trying to set up the Dovecot pop3 server for some virtual hosting I am doing and it is going well, I am generating a passwd file that points dovecot to the virtual users mailspool. The only thing that I don't have working is that my current pop3 server (NTMail) has case insensitve usernames. Dovecot doesn't. I was hoping there was just an option to turn on, but I didn't see one, and unfortunately I don't know enough C to change to lc($submitted_user) eq lc($database_user) like I would in perl :-) I do have control over generating the passwd file, and it is currently generating the users to lowecase in the file, so just lc($submitted_user) eq $database_user would work well enough. Unfortunately I don't know enough C to do that, so I thought I would ask if anyone has done this. So, does anyone have any ideas on how to do this? Thank you, -- andrew /---------------------------------------------------------------------\ | ICQ# | Proud Member of Mad-Techies.org | | 253198 | http://www.mad-techies.org | |---------------------------------------------------------------------| | There are two ways to write error-free programs; | | only the third one works. | \---------------------------------------------------------------------/

1 2

[Dovecot] chdir() on NFS
by Christian Andersen 19 Mar '04

19 Mar '04

Hi, I'm having problems accessing home directories though NFS. This setup uses LDAP and Kerberos. Users defined on the local host work fine. This is what dovecot writes in the logs while trying to log in as the user johndoe: ---- Mar 19 14:10:54 jack dovecot-auth: nss_ldap: reconnecting to LDAP server... Mar 19 14:10:54 jack dovecot-auth: nss_ldap: reconnected to LDAP server after 1 attempt(s) Mar 19 14:10:54 jack imap-login: Login: johndoe [10.0.0.30] Mar 19 14:10:54 jack dovecot: chdir(/home/johndoe) failed: Permission denied Mar 19 14:10:54 jack dovecot: child 3525 (imap) returned error 89 ---- The authentication is OK, but dovecot fails to get access to the home directory. What username does dovecot try to chdir() as? If I 'su' from to that user I have access to /home/johndoe, and a quick test with Courier IMAP worked fine. Postfix has no problem delivering mail in the users maildir using procmail. Some relevant config options: default_mail_env = maildir:~/mail:INDEX=/var/indexes/%n auth_userdb = passwd auth_passdb = pam auth_user = root -- Christian Andersen <http://phuzz.org>

2 4

RE: [Dovecot] Dovecot failing silently on startup
by Julian Melville 19 Mar '04

19 Mar '04

> Can you do an strace of a running dovecot process so we can > get a better idea? (You ought to cc the list as well.) Sorry for the slow reply, it's taken me a few days to get back to this and observe the problem again. I've placed a tarball of the output of "strace -ff -o dovecot dovecot" here: http://rimu.tiddly-pom.com/dovecot-strace.tar.gz To my (admittedly untrained) eye, it's looking for and not finding /etc/ld.so.nohwcap, and then repeatedly not finding /var/run/dovecot/ssl-parameters.dat. At that point there is a /var/run/dovecot/ssl-parameters.dat.tmp - is that where the SSL stuff is being generated? Is it just that Dovecot is stalled until the ssl-parameters.dat file appears? Thanks, Julian.

2 1

[Dovecot] duplicate mails
by Neal D. Becker 18 Mar '04

18 Mar '04

I run kmail and use it to automatically sort my mails to various imap folders (using kmail's disconnected imap). If I fire up a second instance of kmail (e.g., @work + @home) then both will do this, and I wind up with 2 copies of each mail. Can dovecot be taught to discard duplicate mail ids, or maybe some other mechanism to avoid this problem?

1 0