- dovecot - dovecot.org

Re: [Dovecot] system account delivery userdb authentication
by Ben Morrow 29 May '13

29 May '13

[Please keep replies on the list.] At 6AM +0200 on 29/05/13 you (Yann Shukor) wrote: > > Although simpler to set up, I chose to steer clear of the single user > representing 'all' because I liked the idea of giving users access to > Usermin allowing them to manage their own password and vacation msg > (+filtering, ...) and furthermore they could login with their username > (domain-less). While it's often convenient to make a distinction between 'system' and 'virtual' users, Dovecot doesn't actually know the difference. It just looks users up in the passdb and userdb you have configured. This means it's perfectly straightforward to do a completely 'virtual user' setup, and then change the passdb to 'pam', which will let the users log in with their ordinary Unix password. To allow users to log in with just a username, all you need to do is make sure the users in the userdb and passdb are listed that way. Userdb passwd and passdb pam naturally are, but there's nothing to stop you using other userdbs if you want to. The only trick here is that if you're using LDA/LMTP then incoming deliveries will (or, at least, usually should) be addressed to a full email address, so you need auth_username_format to trim that back to a username. I don't know anything about Usermin, but if it is trying to set up traditional procmail filtering and vacation(1), you may be in trouble. Or, at least, you may have to give up on using Dovecot to deliver the mail and let Postfix's local(8) and procmail deliver it into maildirs themselves. If you're happy with this, this isn't a problem for Dovecot, but it might be better to go with Sieve filtering instead. Sieve is a newish mail filtering language, designed primarily to be safe (procmail has a nasty habit of letting users run arbitrary programs). Dovecot's LDA has a pretty complete sieve implementation called Pigeonhole (you may need to install it separately), which also supports a protocol called ManageSieve designed for uploading sieve scripts remotely. There are plugins for some webmail systems (and some desktop mail clients, for that matter) which let the user edit their filters in a gooey way; this includes setting up vacation messages. I use Roundcube webmail for this purpose; it also has a perfectly good PAM password- changing plugin. Ben

1 0

[Dovecot] dsync
by Erik Colson 29 May '13

29 May '13

Hi Is dovecot dsync considered an alternative to offlineimap (or others) when both distant and local are IMAP dovecot servers ? I used offlineimap for this, but somehow offlineimap got messed up (more than once, but without me able to explain how it happened). So I'm considering dsync for this purpose... Thanks! -- erik

1 0

[Dovecot] Enable IMAP only for certain users/IP
by Simone Marx :: Edinet Srl 29 May '13

29 May '13

Hi, I'm trying to config dovecot to enable IMAP protocol only for certain IPs and users. The logical steps I've followed are: 1. If a user is trying to login from an IP that I've authorized ( listed in a file) the request is authorized. 2. If not, if the user is listed in a second file the request is authorized. 3. If also this check fails the request is rejected. I'm using PAM for passdb and a passwd-file for userdb: passdb { driver = pam args = session=yes failure_show_msg=yes max_requests=16 cache_key=%u%r%l dovecot-%s } userdb { driver = passwd-file args = /etc/passwd-dovecot } In /etc/pam.d/ there are two files: dovecot-pop3 dovecot-imap dovecot-pop3: #%PAM-1.0 @include common-auth @include common-account @include common-session (for this protocol everything works fine, I don't want to limit it.) dovecot-imap: #%PAM-1.0 @include common-auth auth sufficient pam_listfile.so item=rhost sense=allow file=/etc/dovecot/imaphosts onerr=fail auth required pam_listfile.so item=user sense=allow file=/etc/dovecot/imapusers onerr=fail @include common-account @include common-session If I'm not wrong, once the user is authenticated, PAM checks if the remote IP address is in imaphosts; if it's true, it returns PAM_SUCCESS and stops the execution of the auth block, else if it's false, PAM executes the next line, verifying the presence of the username in imapusers file; if found, then return PAM_SUCCESS, else fail. If this can work, I've a problem with pam_listfile.so and IP addresses: I want to do something smarter than specifying 2^11 IP addresses instead a /21 or IP/netmask Are there alternatives for doing it better? Thanks. Sincerely, Simone Marx.

2 4

[Dovecot] Corrupt index file zlib
by Paul Lim 29 May '13

29 May '13

Hi, I'm getting this error constantly on a couple of folders. No matter what I do it keeps recurring. -- 2013-05-29 14:15:03 imap(nj(a)***.com.au): Error: Cached message size smaller than expected (2551 < 8192) 2013-05-29 14:15:03 imap(nj(a)***.com.au): Error: Maildir filename has wrong S value, renamed the file from /home/***.com.au/nj/.***.Builders/cur/1369030267.M775209P12595.pygmy,S= /2551:2,S to /home/***.com.au/nj/.***.Builders/cur/1369030267.M775209P12595.pygmy,S= /2551:2,S 2013-05-29 14:15:03 imap(nj(a)***.com.au): Error: Corrupted index cache file /home/archarch.com.au/nj/.***.Builders/dovecot.index.cache: Broken /physical size for mail UID 13 2013-05-29 14:15:03 imap(nj(a)***.com.au): Error: Cached message size smaller than expected (2551 < 8284) 2013-05-29 14:15:03 imap(nj(a)***.com.au): Error: Maildir filename has wrong S value, renamed the file from /home/***.com.au/nj/.***.Builders/cur/1369030267.M775209P12595.pygmy,S= /2551:2,S to /home/***.com.au/nj/.***.Builders/cur/1369030267.M775209P12595.pygmy,S= /2551:2,S 2013-05-29 14:15:03 imap(nj(a)***.com.au): Error: Corrupted index cache file /home/archarch.com.au/nj/.***.Builders/dovecot.index.cache: Broken /physical size for mail UID 13 2013-05-29 14:15:03 imap(nj(a)***.com.au): Error: read(/home/***.com.au/nj/.***.Builders/cur/1369030267.M775209P12595. pygmy,S=2551:2,S) failed: Input/output error (uid=13) --- stuff I've done: - Deleted dovecot* in .Builders/ - run maildir-size-fix.pl -v -r -f- c on .Builders/ - delete and recreate the folder Dovecot 2.1.7 (wheezy) zlib enabled maildir_broken_filename_sizes = yes There are only 6 emails, so it's only building dovecot.index.log, not the cache file --- dovecot-uidlist --- 3 V1317717759 N1 G1b2d4a37936fa551430d0000c0318918 1 :1369030267.M775209P12595.pygmy,S=8284 2 :1369030564.M957106P12595.pygmy,S=13188 3 :1369030568.M223636P12595.pygmy,S=23270 4 :1369030568.M223637P12595.pygmy,S=10813 5 :1369030568.M223638P12595.pygmy,S=58600 6 :1369030615.M783237P12595.pygmy,S=9677 7 :1369030267.M775209P12595.pygmy,S=2551 8 :1369030564.M957106P12595.pygmy,S=3560 ----- --- ls cur --- 1369030267.M775209P12595.pygmy,S=8284:2,S 1369030564.M957106P12595.pygmy,S=13188:2,RS 1369030568.M223636P12595.pygmy,S=23270:2,RS 1369030568.M223637P12595.pygmy,S=10813:2,RS 1369030568.M223638P12595.pygmy,S=58600:2,RS 1369030615.M783237P12595.pygmy,S=9677:2,RS ---- It all seems to match... but it continues to break. If I delete the first email file, it breaks on the next one as well. Any thoughts?? I'm thinking I'll probably disable zlib if I can't find a solution... will this mean I have to decompress all the compressed emails? cheers Paul

2 3

[Dovecot] Dovecot 2.1.7-7 only allow localhost access to IMAP and POP3
by Torben Schou Jensen 29 May '13

29 May '13

Recently I have upgraded my server to Debian 7. Debian have now removed uw-imapd and suggest using dovecot instead. Debian include dovecot version 2.1.7-7. On http://www.debian-administration.org/articles/275 and http://www.debian-administration.org/articles/200 I can read how to setup older version of dovecot with SquirrelMail. They recommend to use uncrypted IMAP when SquirrelMail is on same server. What I would like to support is then imap, imaps, pop3 and pop3s. imaps and pop3s for external users. imap and pop3 only open for localhost, that is SquirrelMail on same machine. With dovecot 1 you could restrict access using "imap_listen = localhost" How do I make the same restriction with localhost on dovecot 2 ??? Brgds Torben

3 2

[Dovecot] dsync Panic: Unknown key: send_mail_requests
by Oli Schacher 29 May '13

29 May '13

Hi Timo With the current dovecot hg we're getting dsync replication errors "Panic: Unknown key: send_mail_requests" followed by a crash. This seems to have been introduced somewhere around http://hg.dovecot.org/dovecot-2.2/rev/4883a8e1db13 Log output from latest hg, 2.2.2 (e7c474011934+): May 29 09:30:53 munged03 dovecot: doveadm(luke(a)example.com): Panic: Unknown key: send_mail_requests May 29 09:30:53 munged03 dovecot: doveadm(luke(a)example.com): Error: Raw backtrace: /usr/lib64/dovecot/libdovecot.so.0(+0x5f7da) [0x7f84f84637da] -> /usr/lib64/dovecot/libdovecot.so.0(+0x5f826) [0x7f84f8463826] -> /usr/lib64/dovecot/libdovecot.so.0(+0x2006a) [0x7f84f842406a] -> dovecot/doveadm-server() [0x42c41b] -> dovecot/doveadm-server() [0x42908b] -> dovecot/doveadm-server(dsync_brain_master_init+0x1c9) [0x4186f9] -> dovecot/doveadm-server() [0x416606] -> dovecot/doveadm-server() [0x40c94f] -> dovecot/doveadm-server() [0x414b7a] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_call_io+0x36) [0x7f84f8472b66] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_handler_run+0xa7) [0x7f84f8473c17] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_run+0x28) [0x7f84f8472b08] -> /usr/lib64/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f84f8428ae3] -> dovecot/doveadm-server(main+0x121) [0x4152c1] -> /lib64/libc.so.6(__libc_start_main+0xfd) [0x34de41ecdd] -> dovecot/doveadm-server() [0x40c1b9] May 29 09:30:53 munged03 dovecot: doveadm(luke(a)example.com): Fatal: master: service(doveadm): child 49077 killed with signal 6 (core dumped) dovecot -n is attached Best regards Oli -- message transmitted on 100% recycled electrons

2 1

[Dovecot] Email migration
by Romer Ventura 29 May '13

29 May '13

Hello, So I am currently running dovecot 1.2.11 on Debian 5 for our production email systems. We just deployed some new Debian 7 servers and we will be upgrading to the latest dovecot version. I've been reading the docs, but I wanted to heard some feedback on the import of all my current email into the new installation. We have 320GB worth of email. Any gotchas I should be prepared for? Any complications I should be aware of when importing all these data? Any thoughts would be appreciated. Thanks. <BR CLEAR="ALL"> <hr style="border: 1px solid #CCC;"> <p style="font-style:italic; font-size:8pt; font-family:verdana; color:gray;">This document and attachments may contain technical data controlled under the U.S. International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR) and may not be exported to a Foreign Person, either in the U.S. or abroad, without the proper authorization by the U.S. Department of State or Department of Commerce, whichever is applicable. CONFIDENTIALITY NOTE: This electronic transmission, including all attachments, is directed in confidence solely to the person(s) to whom it is addressed, or an authorized recipient, and may not otherwise be distributed, copied or disclosed. The contents of the transmission may also be subject to intellectual property rights and such rights are expressly claimed and are not waived. If you have received this transmission in error, please notify the sender immediately by return electronic transmission and then immediately delete this transmission, including all attachments, without copying, distributing or disclosing same. The recipient should check this e-mail and any attachments for the presence of viruses. Houston Sigma Technologies L.P. accepts no liability for any damage caused by any virus transmitted by this e-mail.</p>

2 1

[Dovecot] system account delivery userdb authentication
by Yann Shukor 29 May '13

29 May '13

Hi I have a remaining issue with a mail server setup. Composed of Postfix and Dovecot it is is a 'local' mail server At first I relied upon Mysql to store the various parameters, and then switched to a flat file approach I also initially set the server up to handle virtual users, but then I realized that it was destined to manage local system accounts only. So I reconfigured it accordingly Relying on system accounts for authentication means that the domain name component is absent from the username (as opposed to virtual user identifiers) This caused me some difficulty at first with roundcube, but I was able to get around it through a manual adjustment in Mysql The remaining aspect that isn't working is the delivery of emails. The entry in master.cf for dovecot looks looks this: dovecot unix - n n - - pipe flags=DRhu user=mail:mail argv=/usr/lib/dovecot/deli ver -d ${recipient} The problem is that the recipient equates to the users email address, which can't in fact be used for authentication purposes with system accounts. I then tried replacing recipient with user: dovecot unix - n n - - pipe flags=DRhu user=mail:mail argv=/usr/lib/dovecot/deliver -d ${user} There seems to be a rights issue because I get the following error: dovecot Fatal: setgid(100(users)) failed with euid=8(mail), gid=8(mail), egid=8(mail): Operation not permitted Any ideas ? thanks yann # 1.2.15: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-686 i686 Debian 6.0.7 ext4 log_timestamp: %d-%m-%Y %H:%M:%S protocols: imap imaps pop3 pop3s ssl_cert_file: /etc/ssl/certs/postfix.pem ssl_key_file: /etc/ssl/private/postfix.key login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_privileged_group: mail mail_location: maildir:/var/mail/%u mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 lda: auth_socket_path: /var/run/dovecot/auth-master postmaster_address: postmaster(a)holinice.com mail_plugins: sieve log_path: syslog_facility: mail auth default: mechanisms: plain login verbose: yes passdb: driver: pam userdb: driver: passwd socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 432 user: mail group: mail

2 1

[Dovecot] dovecot + virtio (9p2000.L) = errors
by epek＠gmx.net 28 May '13

28 May '13

Hi! I hope someone knows more about the issues I've encountered in: Setup: I am running dovecot 2.1.7 on Debian Wheezy in a virtual machine (kvm-style qemu-kvm: host: ubuntu 13.04/1.4.0-dfsg-1expubuntu). The mail storage is a directory on the host machine mounted via virtfs (9p2000.L) on the guest. Furthermore ISPConfig is involved in that setup, but that should not make any significant difference at that point. Problem resolved: The problem is, that similar to nfs mmap() and dotlocking seem to fail - the mmap issue could be resolved by adding: mmap_disable=yes to dovecot.conf Problem remaining: Still the following errors remain, despite dotlock_use_excl=no May 27 12:54:51 host dovecot: imap(test@mydomain): Error: fstat(/var/vmail/mydomain/test/.quotausage.lock) failed: No such file or directory May 27 12:54:51 host dovecot: imap(test@mydomain): Error: file dict commit: file_dotlock_open(/var/vmail/mydomain/test/.quotausage) failed: No such file or directory May 27 12:54:51 host dovecot: imap(test@mydomain): Error: fstat(/var/vmail/mydomain/test/Maildir/dovecot-uidlist.lock) failed: No such file or directory May 27 12:54:51 host dovecot: imap(test@mydomain): Error: fstat(/var/vmail/mydomain/test/Maildir/dovecot-uidlist.lock) failed: No such file or directory May 27 12:54:51 host dovecot: imap(test@mydomain): Error: fstat(/var/vmail/mydomain/test/Maildir/dovecot-uidlist.lock) failed: No such file or directory May 27 12:54:51 host dovecot: imap(test@mydomain): Error: fstat(/var/vmail/mydomain/test/Maildir/dovecot-uidlist.lock) failed: No such file or directory May 27 12:54:51 host dovecot: imap(test@mydomain): Error: fstat(/var/vmail/mydomain/test/Maildir/dovecot-uidlist.lock) failed: No such file or directory May 27 12:54:51 host dovecot: imap(test@mydomain): Error: fstat(/var/vmail/mydomain/test/Maildir/dovecot-uidlist.lock) failed: No such file or directory May 27 12:54:52 host dovecot: imap(test@mydomain): Error: fstat(/var/vmail/mydomain/test/Maildir/dovecot-uidlist.lock) failed: No such file or directory May 27 12:54:52 host dovecot: imap(test@mydomain): Error: file_dotlock_create(/var/vmail/mydomain/test/Maildir/dovecot-uidlist) failed: No such file or directory May 27 12:54:52 host dovecot: imap(test@mydomain): Error: fstat(/var/vmail/mydomain/test/Maildir/dovecot-uidlist.lock) failed: No such file or directory May 27 12:54:52 host dovecot: imap(test@mydomain): Error: fstat(/var/vmail/mydomain/test/Maildir/dovecot-uidlist.lock) failed: No such file or directory May 27 12:54:52 host dovecot: imap(test@mydomain): Error: file_dotlock_create(/var/vmail/mydomain/test/Maildir/dovecot-uidlist) failed: No such file or directory The "failed" files are existing on that path - permissions for the configured "vmail" user and group exist (0600). I'd be greatful for any hint on how to resolve that issue - Thanks in advance! Regards Erich

1 0

[Dovecot] put users's mailbox in read only mode
by Frank Bonnet 28 May '13

28 May '13

Hello For internal purpose I need to put some users's mailboxes and IMAP folders in read only mode during few days. We use MBOX format and UNIX real users mode ( FreeBSD 9.1 ) thanks for any info

2 1

[Dovecot] UIDLs problem on migration to dovecot
by Oscar A. Jara 27 May '13

27 May '13

Hello list, I'm about to migrate from Courier 4.6 (POP and IMAP) to Dovecot 1.2. I am currently trying to match UIDLs of both servers to avoid redownload of mails but I could not success. I've already configured dovecot POP3 to format UIDLs like this: pop3_uidl_format = UID%u-%v I also executed the script 'courier-dovecot-migrate.pl' to do the migration in a couple of test accounts but the IDs don't match for all mails and the script didn't report any errors. I have production courier pop3 server running on port 110 and the new dovecot server running on another port. Here I paste some of the missmatches in one of the test accounts: 8827 UID9060-1259354075 | 8827 UID9041-1259354075 8828 UID9061-1259354075 | 8828 UID9023-1259354075 8829 UID9062-1259354075 | 8829 UID9067-1259354075 8830 UID9063-1259354075 | 8830 UID9064-1259354075 8831 UID9064-1259354075 | 8831 UID9043-1259354075 8832 UID9065-1259354075 | 8832 UID9061-1259354075 8833 UID9066-1259354075 | 8833 UID9025-1259354075 8834 UID9067-1259354075 | 8834 UID9047-1259354075 One thing that I don't know if is important is that I am using dovecot-lda since long ago, not courier lda. I don't know what I am missing here and I would appreciate some help. Thank you. __________ Information from ESET Mail Security, version of virus signature database 8381 (20130527) __________ The message was checked by ESET Mail Security. http://www.eset.com

1 0

[Dovecot] Problem with dsync replication : mails are not deleted correctly
by Nicolas ROCHE 27 May '13

27 May '13

Hello, I would like to configure a postfix / dovecot cluster based on ssh / dsync replication. I have two linux serveurs (Oracle RHEL 5 86_64) and I install both sides dovecot (V2.2.2+), postfix (2.10.0) and mysql (Ver 14.12 Distrib 5.0.77). I configured these servers in order to make them replicate, and I created some virtual users. I use some java code in order to send mail (with SMTP) and to get mail (with POP3). When the java code get a mail, it deletes it from mailbox (the flag "DELETED" is set to true). When I send a mail on server A, I can see the mail replicated on both servers A and B : a file containing the message data exists in /home/vmail/test03/new/ in both sides. When I get the mail from server A with my java POP3 client, all is OK : the mail is deleted on both servers A and B (no more file in /home/vmail/test03/new/). The problem is when I send a mail on server A and I get it from server B : I can get the mail, but the mail is not deleted from server B, and neither from server A. When I try a second time to get the mail on server B, then all becomes OK : the mail is deleted on both server A and B. I can reproduce the problem every time. Is it a known bug or not ? If yes, is there a patch ? If no, may the problem come from my config ? Regards, Nicolas. [root@int-proxy1 dovecot-2.2.2-p1]# doveconf -n # 2.2.2: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 2.6.18-194.el5xen x86_64 Red Hat Enterprise Linux Server release 5.5 (Tikanga) ext3 disable_plaintext_auth = no hostname = int-proxy1 mail_location = maildir:/home/vmail/%u mail_plugins = acl quota notify replication mail_privileged_group = mail mbox_write_locks = fcntl namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = /usr/local/etc/dovecot/dovecot-sql.conf driver = sql } plugin { mail_replica = remote:vmail@int-proxy2 replication_full_sync_interval = 1 hours } pop3_uidl_format = %g postmaster_address = postmaster(a)mail.fluid-e.int service aggregator { fifo_listener replication-notify-fifo { mode = 0666 user = vmail } unix_listener replication-notify { mode = 0666 user = vmail } } service auth-worker { user = root } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } unix_listener auth-userdb { mode = 0666 user = vmail } user = root } service config { unix_listener config { user = vmail } } service doveadm { user = vmail } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0666 user = postfix } } service pop3-login { inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 ssl = yes } } service replicator { process_min_avail = 1 } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem submission_host = int-proxy1:25 userdb { args = /usr/local/etc/dovecot/dovecot-sql.conf driver = sql } protocol imap { mail_plugins = acl quota imap_acl imap_quota mail_log notify }

3 6

[Dovecot] Upgrading 1.2 to 2.x
by Simon B 27 May '13

27 May '13

Hi In an unscheduled maintenance window next week, I will have the opportunity to upgrade to 2.x should I wish to do and provided I can get it working on stage first. My questions: I've seen a lot on the list about the rock-solidness of 1.2 but also some people saying that some versions of 2.x better than others. Is there a recommended version - I don't need bleeding edge, I'd prefer stability, or one most of you can agree on? What am I missing by not upgrading? A few months ago I tried to convert a Dovecot 1.2 config into 2.1 and wasn't very successful. Any tips on how to go about it? Thanks. Simon

2 2

[Dovecot] mixing virtual and system users
by Julien Beauviala 27 May '13

27 May '13

Hello all, I'm setting up a small mail server for aprox 20 users, and I'm trying to keep it really simple so I went the virtual users as text file way, following this page : http://lukas-schulze.de/2012/02/setup-postfix-and-dovecot-on-debian-squeeze… It seemed to work fine except for the 'system' users, and I am stumped by this. Basically the config does not 'see' /etc/aliases, so mail to root or mailman are 'Recipient address rejected: User unknown'. I've added the backup pam as explained by the following page* and tried many permutations in /etc/postfix/main.cf but still not good, systems users are rejected. Obviously something is amiss. * http://wiki2.dovecot.org/Authentication/MultipleDatabases If someone could point me in the right direction, that would be great. The system is debian 6, details of the configuration below. dovecot -n : ------------ # 1.2.15: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.7 ext3 log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s ssl_cert_file: /etc/ssl/certs/postfix.pem ssl_key_file: /etc/ssl/private/postfix.key login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login first_valid_uid: 5000 last_valid_uid: 5000 first_valid_gid: 5000 last_valid_gid: 5000 mail_privileged_group: vmail mail_location: maildir:/var/vmail/%d/%n/Maildir mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 lda: auth_socket_path: /var/run/dovecot/auth-master postmaster_address: postmaster(a)example.net mail_plugins: sieve log_path: auth default: mechanisms: plain login verbose: yes passdb: driver: pam passdb: driver: passwd-file args: scheme=CRAM-MD5 /etc/dovecot/users.conf userdb: driver: static args: uid=5000 gid=5000 home=/var/vmail/%d/%n allow_all_users=yes userdb: driver: passwd socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: vmail postconf -n : ------------- alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix debug_peer_level = 2 inet_interfaces = all mailbox_size_limit = 0 mydestination = localhost mydomain = example.net myhostname = osiris.example.net mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = $mydomain queue_directory = /var/spool/postfix recipient_delimiter = + relayhost = show_user_unknown_table_name = no smtp_tls_CAfile = /etc/ssl/certs/ca-certificates.crt smtp_tls_note_starttls_offer = yes smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name smtpd_helo_required = yes smtpd_helo_restrictions = reject_invalid_helo_hostname smtpd_recipient_restrictions = reject_unknown_recipient_domain, reject_unauth_pipelining, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous smtpd_sasl_tls_security_options = $smtpd_sasl_security_options smtpd_sasl_type = dovecot smtpd_tls_CAfile = /etc/ssl/certs/ca-certificates.crt smtpd_tls_cert_file = /etc/ssl/certs/postfix.pem smtpd_tls_key_file = /etc/ssl/private/postfix.key smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_tls_session_cache_timeout = 3600s smtpd_use_tls = yes tls_random_source = dev:/dev/urandom virtual_alias_maps = hash:/etc/postfix/virtual_alias_maps virtual_gid_maps = static:5000 virtual_mailbox_base = /var/vmail virtual_mailbox_domains = hash:/etc/postfix/virtual_mailbox_domains virtual_mailbox_maps = hash:/etc/postfix/virtual_mailbox_maps virtual_minimum_uid = 100 virtual_transport = dovecot virtual_uid_maps = static:5000 /etc/postfix/virtual_mailbox_domains : -------------------------------------- @example.net OK @osiris.example.net OK /etc/postfix/virtual_mailbox_maps : ----------------------------------- elisabethp(a)example.net example.net/elisabethp /etc/postfix/virtual_alias_maps : --------------------------------- elisabeth(a)example.net elisabethp(a)example.net j.

2 1

[Dovecot] NFS mount permissions
by Patrick Westenberg 26 May '13

26 May '13

Hi everyone, I would like to move my mails from ocfs2 to an NFS share. As the mountpoint and all folders and files belong to nobody/nogroup, dovecot is only able to access the mails if I give full access to "others". I don't like that. How do you NFS-using guys solve this problem? Regards Patrick

3 4

[Dovecot] Problems with Apple Mail: Enter Password for Account "..."
by Frank Röhm 26 May '13

26 May '13

Hello I have on Ubuntu 12.04 a postfix 2.9.3-2 mailserver with dovecot 2.0.19 I get email from my pc (thunderbird), my smartphone (k9mail) and my MacBook (Apple Mail 4.6 - 1085 on Mac OS 10.6.8) all with IMAP and SSL. All is working normally but sometimes I get an error message from my MacBook, which is irritating. It says this (more or less): "Enter Password for Account "..." The IMAP-Server "..." rejected the password for user "..." Enter your password again or cancel. ... o Remember this password in my keychain" The password was NOT wrong, but anyway, if reenter it, Apple Mail won't accept it, the message will come again and again. I guess that dovecot blocks apple mail maybe because the other two clients try to login at the same time? Is there any setting where I could adjust this blocking (if it is blocking) in dovecot? Only if this really is the reason. The issue is coming not regularily but when it comes, often for half an hour I cannot check mails for this account (other accounts on apple mail won't be touched). If I restart Apple Mail, the problem could be fixed, but maybe not. In the logfiles of Dovecot I don't find anything about this. Thank you and kind regards frank

4 4

Re: [Dovecot] Dovecot mysql replication
by Alex Crow 26 May '13

26 May '13

Hi, Balls, the silly script (written in largely incomprehensible perl by a predecessor of mine) is supposed to catch mailing lists, and HR won't let us have it auto-terminate or update... :-( Thanks for giving me an another few hours work :-) Alex On 24/05/13 08:54, Edwardo Garcia wrote: > Alex, you on long vacation? > > Hi, I am on leave, returning on Thursday 9th May If your query is > urgent, please raise contact the team onitdept(a)integrafin.co.uk > <mailto:itdept@integrafin.co.uk>. Regards Alex > > > On Fri, May 24, 2013 at 5:48 PM, Alex Crow <acrow(a)integrafin.co.uk > <mailto:acrow@integrafin.co.uk>> wrote: > > On 24/05/13 08:45, Edwardo Garcia wrote: > > Halo, > > (First time posting, please forgive English is not native) > > Change from Courier to Dovecot 2.1.16 > > Having two server. > > Having mysql on thiz two server, one master, one slave. > > What we wish is slave Dovecot only ask slave mysql, unless > slave mysql not > work when then ask master, we have Postfix do thiz fallover > good, but > Dovecot talk to slave and master no mater what, we think thiz > defeat > fallover as we not want this aktion, but aktion like Postfix. > > The problemo is can not find Dovecot option for thiz in > wiki2.dovecot.org <http://wiki2.dovecot.org>, > is possible? > > > You could set up MySQL in Dual Master mode instead.... > > Alex > > > > -- > This message has been scanned for viruses and > dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is > believed to be clean.

1 0

[Dovecot] dovecot-sieve (pigeonhole) -- is is possible to "re-filter" INBOX when filters have been updated?
by Lev Serebryakov 25 May '13

25 May '13

Hello, Dovecot. I want to migrate to webmail (roundcube) over dovecot + sieve (pigeonhole). Now I'm using on-client (The Bat!) filters, but I need to have acccess to my mail everywhere, not only on my workstation. And I wonder, is here simple way to re-filter INBOX after sieve filters have been changed? Any offline (desktop) mail client could run new filters on old messages -- is here any way to do this with dovecot-sieve (pigeonhole)? I'm using postfix + dovecot LMTP to run sieve filters. -- // Black Lion AKA Lev Serebryakov <lev(a)serebryakov.spb.ru>

2 4

[Dovecot] Virtual Servers, or different authentication setups.
by Joshua Gardner 25 May '13

25 May '13

I want to know if there is any virtual server functionality in Dovecot? I would like to have two separate configurations, that access the same email, running in the same Dovecot instance. They would bind different ports and/or IPs, but have different authentication settings. In particular, one would use a PLAIN password scheme, the other SSHA. How would I go about setting up these virtual servers? Or, would I have to run separate instances of Dovecot? If I do have to run separate instances, how do I keep them from interfering with eachother? -Josh

2 1

[Dovecot] Passwordless auth?
by Dan Mahoney, System Admin 25 May '13

25 May '13

Hey all, I'm in the process of writing some scripts which I want to be able to take actions on my local mailbox. (For example, to move a subset of messages to the trash over time, if unread for a week. To act on messages in my learn-spam folder and then delete them). What occured to me as being a Neat Idea is if Dovecot could honor ident (rfc1413) lookups, from trusted hosts (i.e. 127.0.0.1). In this way I get all the benefits of dovecot's indexing being updated and nice locking, but I don't have to leave my password laying around in a plaintext file. (Yes, this assumes I'm running a shell on the mail server. I'm not concerned about the same level of security when you could simply cat my mail spool). I'd definitely consider something like an SSH key with a forced command (I do see questions in the FAQ about making dovecot work over a socket connection), but that forgoes using standard imap clients. I could also create a dovecot-only user with my UID and no other login privileges, but I'd like this to "just work" for anyone. I don't know anything about if dovecot supports X509 auth, but this would require the client libraries to support such a thing, which not all do. I'd love to hear about any other ways people have thought about to do this. Any ideas? -Dan Mahoney -- --------Dan Mahoney-------- Techie, Sysadmin, WebGeek Gushi on efnet/undernet IRC ICQ: 13735144 AIM: LarpGM Site: http://www.gushi.org ---------------------------

7 9

[Dovecot] userdb section order seems important in config file
by Ken A 24 May '13

24 May '13

Hi Timo, et al, I'm using Dovecot 2.2.2, with dict file based quota and a quota_rule in dovecot.conf. I have userdb configured like so: userdb { driver = passwd-file args = /etc/dovecot/passwd-file } userdb { driver = passwd } I get the behavior I want with a single line in the passwd-file for any users that I'd like to override the default quota. BUT, if I list the userdb sections in the reverse order, with the driver=passwd first, then the quotas in passwd-file are ignored. I have a feeling I am counting on undocumented behavior that might change in the future. Or is this okay to depend on? Thanks, Ken -- Ken Anderson Pacific Internet - http://www.pacific.net

1 1

[Dovecot] Store Mails into SQL DB
by Leander S. 24 May '13

24 May '13

Hi, is there an option to store eMails into DB right away instead of storing them as files on the HDD?

3 2

[Dovecot] Is it possible to palce "detailed" (with local+folder@domai.com) messages not to INBOX/folder, but to INBOX/FixedSubfolder/folder?
by Lev Serebryakov 24 May '13

24 May '13

Hello, Dovecot. Now, with enabled "recipient_delimiter = +", "lmtp_save_to_detail_mailbox" and using LMTP, messages with "detail" in address, are placed in auto-created mailboxes. It is great, but what if I want to put all such mailboxes not in inbox directly, but lower in mailbox hierarchy? Is it possible without using sieve? -- // Black Lion AKA Lev Serebryakov <lev(a)serebryakov.spb.ru>

1 0

[Dovecot] How to rewrite header from X-Original-To to Delivered-To
by Kiran Reddy 24 May '13

24 May '13

HiAll, How to rewrite mail headers from X-Original-To to Delivered-To using sieve script. I am using Dovecot-2.2 and Pigeonhole 0.4. Thanks, Kiran Reddy

2 4

[Dovecot] How to rewrite header from X-Original-To to Delivered-To
by Kiran Reddy 24 May '13

24 May '13

HiAll, How to rewrite mail headers from X-Original-To to Delivered-To using sieve script. I am using Dovecot-2.2 and Pigeonhole 0.4. -- Thanks & Regards Kiran Reddy Lead Systems Administrator Unicel Technologies Pvt. Ltd. | C-Block | Second Floor | Vaishnavi Silicon Terrace, 30/1 | Hosur Main Road | Koramangala | Bangalore- 560095 Mobile (+91) 7829007447 Skype My status <skype:kiranreddyi?call> Unicel Technologies <http://www.uniceltech.com/> website <http://www.uniceltech.com/> | newsletter <http://www.uniceltech.com/mediacentre.shtml> | map <http://maps.google.com/maps?f=q&source=embed&hl=en&geocode=&q=UNICEL+Techno…> | email <mailto:kiran@uniceltech.com> <https://www.facebook.com/pages/Unicel-Technologies-Pvt-Ltd/387394831334812><https://www.facebook.com/pages/Unicel-Technologies-Pvt-Ltd/387394831334812> *Confidentiality Note:* This e-mail and any attachments are confidential and may be protected by legal privilege. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of this e-mail or any attachment is prohibited. If you have received this e-mail in error, please notify us immediately by returning it to the sender and delete this copy from your system. Thank you for your cooperation.

1 0

[Dovecot] Dovecot 2.2.2 compiling error
by Mart Pirita 23 May '13

23 May '13

Hello. I cant build 2.2.2, but I can build fine version 2.1.16 with same options: RedHat based customized distro, 2.6.28.10 kernel Build options: export CPPFLAGS export LDFLAGS CPPFLAGS=-I/usr/local/ssl/include LDFLAGS=-L/usr/local/ssl/lib ./configure \ --prefix=/usr \ --with-ssl=openssl \ --with-ssldir=/etc/ssl \ --sysconfdir=/etc \ --without-vpopmail \ --with-pam \ --without-bsdauth \ --without-sql \ --without-nss \ --without-ldap \ --without-pgsql \ --without-mysql \ --without-sqlite \ --with-rundir=/var/run/dovecot\ --without-deliver \ --without-gssapi Build error: /bin/sh ../../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../.. -I../../../src/lib -I../../../src/lib-test -I../../../src/lib-dict -I../../../src/lib-fs -I../../../src/lib-mail -I../../../src/lib-imap -I../../../src/lib-index -I../../../src/lib-storage -I/usr/local/ssl/include -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -fno-builtin-strftime -MT index-search.lo -MD -MP -MF .deps/index-search.Tpo -c -o index-search.lo index-search.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../.. -I../../../src/lib -I../../../src/lib-test -I../../../src/lib-dict -I../../../src/lib-fs -I../../../src/lib-mail -I../../../src/lib-imap -I../../../src/lib-index -I../../../src/lib-storage -I/usr/local/ssl/include -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -fno-builtin-strftime -MT index-search.lo -MD -MP -MF .deps/index-search.Tpo -c index-search.c -fPIC -DPIC -o .libs/index-search.o index-search.c: In function `search_arg_match_text': index-search.c:715: error: size of array `type name' is negative make[5]: *** [index-search.lo] Error 1 make[5]: Leaving directory `/usr/src/redhat/BUILD/dovecot-2.2.2/src/lib-storage/index' make[4]: *** [all-recursive] Error 1 make[4]: Leaving directory `/usr/src/redhat/BUILD/dovecot-2.2.2/src/lib-storage/index' make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/usr/src/redhat/BUILD/dovecot-2.2.2/src/lib-storage' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/usr/src/redhat/BUILD/dovecot-2.2.2/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/usr/src/redhat/BUILD/dovecot-2.2.2' make: *** [all] Error 2 error: Bad exit status from /var/tmp/rpm-tmp.57532 (%build) Please advise? -- Mart

2 4

[Dovecot] How the does "new" autocreate method works?
by Attila Nagy 23 May '13

23 May '13

Hi, I'm trying to migrate from the deprecated autocreate plugin to the mailbox { auto }setting without success. What do I forget, or misunderstand? I deliver mails via LMTP and log in on IMAP, neither of them create the folders other than the inbox itself. # doveconf -n # 2.2.2: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 9.1-STABLE amd64 auth_cache_negative_ttl = 0 auth_cache_size = 100 M default_process_limit = 1000 default_vsz_limit = 1 G disable_plaintext_auth = no import_environment = LD_PRELOAD info_log_path = syslog lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes lmtp_save_to_detail_mailbox = yes log_path = /var/log/dovecot-errors.log mail_gid = 999 mail_location = maildir:~/Maildir mail_plugins = " quota" mail_temp_dir = /data/tmp mail_uid = 999 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace inbox { inbox = yes location = mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Spam { auto = subscribe special_use = \Junk } mailbox Trash { auto = subscribe special_use = \Trash } prefix = } passdb { args = /usr/local/etc/dovecot/master-users driver = passwd-file master = yes pass = yes } passdb { args = /usr/local/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { mail_log_events = delete mailbox_delete mail_log_fields = uid box msgid size flags vsize from subject quota = maildir:User quota quota_warning = storage=95%% quota-warning 95 %h quota_warning2 = storage=80%% quota-warning 80 %h recipient_delimiter = + sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = pop3 imap lmtp service auth { unix_listener auth-userdb { mode = 0600 user = qmailldap } } service lmtp { inet_listener lmtp { port = 24 } user = qmailldap } service managesieve-login { inet_listener sieve { port = 4190 } } service quota-warning { executable = script /usr/local/quota-warning/quota-warning.sh unix_listener quota-warning { user = qmailldap } user = qmailldap } ssl = no userdb { driver = prefetch } userdb { args = /usr/local/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } userdb { args = /usr/local/etc/dovecot/dovecot-ldap-catchall.conf.ext driver = ldap } verbose_proctitle = yes protocol lmtp { mail_plugins = " quota mail_log notify sieve" } protocol imap { mail_plugins = " quota imap_quota mail_log notify" } Thanks,

2 4

[Dovecot] auth with passwd file , doublepoint in paasword
by Robert Schetterer 23 May '13

23 May '13

Hi, does anyone know if a doublepoint : is in the password how it gets escaped when using http://wiki2.dovecot.org/AuthDatabase/PasswdFile Best Regards MfG Robert Schetterer -- [*] sys4 AG http://sys4.de, +49 (89) 30 90 46 64 Franziskanerstraße 15, 81669 München Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263 Vorstand: Patrick Ben Koetter, Axel von der Ohe, Marc Schiffbauer Aufsichtsratsvorsitzender: Florian Kirstein

2 2

[Dovecot] problem with proxy setup
by Claus 23 May '13

23 May '13

Hi all, i have some troubles in the implementation of my proxyconfiguration. i have two kind of users, the first will be proxied to a dovecot backend with masteruser-login, the other one will be proxied to another non-dovecot imapserver with nopassword. Everything looks to work if i use passwd-file like this: user1:{PLAIN}pass1:::::::proxy=y host=192.168.1.1 destuser=user1*masteruser pass=masterpass user2::::::::nopassword proxy=y host=192.168.2.2 In an second step i try the same behavior with sql (postgresql), but there are my problems. In my thinking, the sql query should return the right fields (in passwd-file) like proxy, host, .. but whats the trick, to get only the correct fields i need for the different funktions? first proxy, host, destuser, pass and on the other side nopassword, proxy and host. Maybe i have mistakes in reasoning, but in sql i get in one query always the same fields. I hope someone can give me some hints an tricks. thanks, Claus

2 1

[Dovecot] Error: Initial status notification not received
by Kavish Karkera 23 May '13

23 May '13

Hi , We are getting a below error on our Dovecot POP/IMAP server on every alternate days. Please help us in knowing with the errors are related to May 23 02:40:05 blade7 dovecot: master: Error: service(pop3-login): Initial status notification not received in 30 seconds, k illing the process May 23 02:40:05 blade7 dovecot: master: Error: service(log): child 8697 killed with signal 9 May 23 02:42:04 blade7 dovecot: master: Error: service(pop3-login): Initial status notification not received in 30 seconds, k illing the process May 23 02:42:04 blade7 dovecot: master: Error: service(ssl-params): Initial status notification not received in 30 seconds, k illing the process May 23 02:42:04 blade7 dovecot: master: Error: service(log): Initial status notification not received in 30 seconds, killing the process May 23 02:42:04 blade7 dovecot: master: Error: service(anvil): Initial status notification not received in 30 seconds, killin g the process May 23 02:42:04 blade7 dovecot: master: Error: service(imap-login): Initial status notification not received in 30 seconds, k illing the process Regards, Kavish Karkera

1 0

[Dovecot] LDA and enkive
by Davide 23 May '13

23 May '13

Hi to all is it possible to use dovecot lda to pipe emails into enkive socket? if yes how? -- *Davide Marchi* *T*eorema *F*errara *Srl* Via Spronello, 7 - Ferrara - 44121 Tel. *0532783161* Fax. *0532783368* E-m@il: *davide.marchi(a)mail.cgilfe.it* Skype: *davide.marchi73* Web: *http://www.cgilfe.it* *CONFIDENZIALITA'* *Ai sensi del D.Lgs. 196/2003 si precisa che le informazioni contenute in questo messaggio sono riservate ed a uso esclusivo del destinatario/dei destinatari. Qualora il messaggio in parola Le fosse pervenuto per errore, La invitiamo ad eliminarlo senza copiarlo e a non inoltrarlo a terzi, dandocene gentilmente comunicazione.* *Per favore, pensa all'ambiente. Stampa questa email solo se necessario.*

2 1

[Dovecot] should dovecot store maildir files with CRLF or LF?
by Christoph Anton Mitterer 22 May '13

22 May '13

Hi. I've made a strange observation. When having Dovecot (at least) with maildir and moving (via IMAP) mail received by some client (Evolution 3.4) into it the following happens: Regardless of whether the mail was originally(!) set with CRLF or LF (i.e. when I use netcat to submit the plain SMTP to the relaying MTA). When the client (Evolution) had received the mail via POP3 before moving it via IMAP into Dovecot... then the maildir file within dovecot is all LF. When the client however received it via IMAP, before in turn moving it on via IMAP into Dovecot, then the maildir file is mixed CRLF and LF, i.e. the body is CRLF, the headers are terminated... Well the actually bug here is probably in Evolution (as so many others... o.O)... but I wondered... what is Dovecot expected to write files? Platform end-of-line markers (i.e. LF in case of UNIX) or always network end-of-line markers (CRLF)? Cheers, Chris.

4 5

[Dovecot] dsync Migration Couldn't keep all uids dove 2.1.16
by Robert Schetterer 22 May '13

22 May '13

Hi Timo, using http://wiki2.dovecot.org/Migration/Dsync for migration i am getting this in periods dsync(sys4-test-2(a)example.de): Info: INBOX: Couldn't keep all uids dsync(sys4-test-2(a)example.de): Warning: Mailbox changes caused a desync. You may want to run dsync again. dsync(sys4-test-2(a)example.de): Warning: I/O leak: 0x756547164490 (line 1229, fd 15) dsync(sys4-test-2(a)example.de): Warning: I/O leak: 0x756547164490 (line 1229, fd 10) dsync(sys4-test-2(a)example.de): Warning: Timeout leak: 0x7565471647a0 (line 1316) dsync(sys4-test-2(a)example.de): Warning: Timeout leak: 0x7565471647a0 (line 1316) Best Regards MfG Robert Schetterer -- [*] sys4 AG http://sys4.de, +49 (89) 30 90 46 64 Franziskanerstraße 15, 81669 München Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263 Vorstand: Patrick Ben Koetter, Axel von der Ohe, Marc Schiffbauer Aufsichtsratsvorsitzender: Florian Kirstein

2 4

[Dovecot] ACLs - creating new top level folders
by Ingo Rogalsky 22 May '13

22 May '13

Hi, I'm wondering, whether it's possible, to define an ACL on the mailbox itself. We use Dovecot 1.2.15 (included in Debian 6) and maildir filesystem layout: /home/mail01/user1/Maildir/new \ /home/mail01/user1/Maildir/cur Inbox /home/mail01/user1/Maildir/tmp / /home/mail01/user1/Maildir/.folder1/new \ /home/mail01/user1/Maildir/.folder1/cur folder1 /home/mail01/user1/Maildir/.folder1/tmp / ... Assigning an ACL with full access rights for user2 to the folder Inbox works as expected. user2 can create subfolders of Inbox, too. But he can't create a new folder like folder1 parallel to Inbox. Is there a possibility of defining an ACL on the mailbox of user1 itself? Or do we need to create all subfolders beneath Inbox like this is usual with other IMAP servers? Ingo --- /usr/sbin/dovecot -c /etc/dovecot/dovecot-test.conf -n # 1.2.15: /etc/dovecot/dovecot-test.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.7 base_dir: /var/run/dovecot-test/ log_path(default): /var/log/dovecot-test/error.log log_path(imap): /var/log/dovecot-test/error.log log_path(pop3): /var/log/dovecot-test/error.log log_path(managesieve): /var/log/dovecot-test/managesieve.log info_log_path(default): /var/log/dovecot-test/info.log info_log_path(imap): /var/log/dovecot-test/info.log info_log_path(pop3): /var/log/dovecot-test/info.log info_log_path(managesieve): /var/log/dovecot-test/managesieve.log protocols: imap imaps pop3 pop3s managesieve listen(default): *:10143 listen(imap): *:10143 listen(pop3): *:10110 listen(managesieve): *:12000 ssl_listen(default): *:10943 ssl_listen(imap): *:10943 ssl_listen(pop3): *:10995 ssl_listen(managesieve): ssl_cert_file: /etc/ssl/certs/imap-cert.pem ssl_key_file: /etc/ssl/private/imap-key.pem shutdown_clients: no login_dir: /var/run/dovecot-test//login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login login_max_processes_count: 4096 max_mail_processes: 4096 verbose_proctitle: yes mail_location: maildir:~/Maildir:INDEX=/srv/dovecot/index/%u:CONTROL=/srv/dovecot/control/%u maildir_copy_preserve_filename: yes mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_process_size: 1024 mail_plugins(default): fts fts_squat acl imap_acl mail_plugins(imap): fts fts_squat acl imap_acl mail_plugins(pop3): mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve pop3_lock_session(default): no pop3_lock_session(imap): no pop3_lock_session(pop3): yes pop3_lock_session(managesieve): no pop3_uidl_format(default): %08Xu%08Xv pop3_uidl_format(imap): %08Xu%08Xv pop3_uidl_format(pop3): %08Xv%08Xu pop3_uidl_format(managesieve): %08Xu%08Xv namespace: type: private separator: / inbox: yes list: yes subscriptions: yes namespace: type: shared separator: / prefix: Other Users/%%u/ location: maildir:%%h/Maildir:INDEX=/srv/dovecot/index/%%u:CONTROL=/srv/dovecot/control/%%u list: children lda: postmaster_address: postmaster@... mail_plugins: sieve acl quota_full_tempfail: yes auth_socket_path: /var/run/dovecot-test/auth-master log_path: /var/log/dovecot-test/deliver.log info_log_path: /var/log/dovecot-test/deliver.log auth default: cache_size: 1024 cache_negative_ttl: 0 username_chars: abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@~ master_user_separator: * debug: yes passdb: driver: passwd-file args: /etc/dovecot/dovecot-passwd.masterusers pass: yes master: yes passdb: driver: passwd-file args: /etc/dovecot/dovecot-passwd passdb: driver: pam userdb: driver: passwd-file args: /etc/dovecot/dovecot-passwd socket: type: listen client: path: /var/run/dovecot-test/auth-client mode: 384 user: vmail master: path: /var/run/dovecot-test/auth-master mode: 384 user: vmail plugin: acl: vfile acl_shared_dict: file:/srv/dovecot/lib/shared-mailboxes sieve: ~/.dovecot.sieve sieve_dir: ~/.pysieved fts: squat fts_squat: partial=4 full=10

3 3

[Dovecot] lda: duplicate prefix?
by Larry Rosenman 22 May '13

22 May '13

I've just started using Dovecot, and can't seem to get the LDA to work. I get the following error: Mar 4 00:47:19 thebighonker dovecot: lda(ler): Error: user ler: Initialization failed: namespace configuration error: Duplicate namespace prefix: "" Mar 4 00:47:19 thebighonker dovecot: lda(ler): Fatal: Invalid user settings. Refer to server log for more information. Mar 4 00:47:19 thebighonker exim[76281]: 1UCPB8-000JqI-L7 == /home/ler/clamav-rules <ler(a)lerctr.org> R=userforward T=address_file_dovecot defer (0): Child process of address_file_dovecot transport returned 75 (could mean temporary error) from command: /usr/local/libexec/dovecot/dovecot-lda dovecot -n attached. the invocation from my exim config for other than inbox: address_file_dovecot: driver = pipe # Use /usr/lib/dovecot/dovecot-lda if using Debian's package. # You may or may not want to add -d $local_part@$domain depending on if you ne ed a userdb lookup done. command = /usr/local/libexec/dovecot/dovecot-lda -f $sender_address -m ~/mail/ ${sg{$address_file}{$home}{}} message_prefix = message_suffix = log_output delivery_date_add envelope_to_add return_path_add #group = mail #mode = 0660 temp_errors = 64 : 69 : 70: 71 : 72 : 73 : 74 : 75 : 78 What am I doing wrong? -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 214-642-9640 (c) E-Mail: larryrtx(a)gmail.com US Mail: 430 Valona Loop, Round Rock, TX 78681-3893

2 9

[Dovecot] dsync-2.2.2 incorrectly synchronizes subscription status of deleted mailbox
by Karol Jurak 22 May '13

22 May '13

Hi, It seems that dsync-2.2.2 doesn't correctly synchronize subscription status of a deleted mailbox. The situation is as follows. There are two servers: A and B, and a test user test_mdbox. Mailboxes (mdbox) of this user on both servers are synchronized. Specifically on both of them there is a Trash/x mailbox. Replication plugin is disabled. I delete Thrash/x mailbox on A with Thunderbird. The relevant IMAP commands issued are: 71 87.068176 10.4.0.13 10.1.107.144 IMAP Request: 9 delete "Trash/x" 72 87.072238 10.1.107.144 10.4.0.13 IMAP Response: 9 OK Delete completed. 73 87.073736 10.4.0.13 10.1.107.144 IMAP Request: 10 unsubscribe "Trash/x" 74 87.085263 10.1.107.144 10.4.0.13 IMAP Response: 10 OK Unsubscribe completed. Inspecting output of 'doveadm mailbox list' and contents of subscriptions file shows that everything is as expected, ie. mailbox was deleted and unsubscribed. Moreover in dovecot.mailbox.log on A the following records appear: #480: delete-mailbox 3f3eb117a51c9a51d8280000f671379f (2013-05-20 14:54:40) #504: delete-dir f91e44cab57821aa456b525c7a2f1d7e (2013-05-20 14:54:40) #528: unsubscribe f91e44cab57821aa456b525c7a2f1d7e (2013-05-20 14:54:40) Subsequently I run 'doveadm sync -u test_mdbox -d'. It causes an entry for Thrash/x to reappear in subscriptions file on both servers and the following records are appended to dovecot.mailbox.log on B: #2112: delete-mailbox 3f3eb117a51c9a51d8280000f671379f (2013-05-20 14:55:49) #2136: delete-dir f91e44cab57821aa456b525c7a2f1d7e (2013-05-20 14:55:49) On A this record is added: #552: subscribe f91e44cab57821aa456b525c7a2f1d7e (2013-05-20 14:55:49) So, in described situation, dsync subscribes a mailbox on a server it was deleted on instead of unsubscribing it on the other one. -- Karol Jurak

2 4

[Dovecot] read only users's mailboxes
by Frank Bonnet 22 May '13

22 May '13

Hello for internal purpose I need to put some users's mailboxes in readonly mode during few days. We use MBOX format and UNIX user mode on a FreeBSD 9.1 box I tried to read-only mount the partition but dovecot does not work this way Any infos welcome

2 2

[Dovecot] Dovecot 2.2.1 LDA and sieve (lack of) errors
by Jim McNamara 22 May '13

22 May '13

Hello again, all. Of course after posting yesterday that all was well with my setup, turns out all is not well. The problem I'm having is with dovecot-lda functioning and making deliveries to my mailbox, but the sieve scripts don't seem to have any effect. Attempts at logging what is/isn't happening have been total failures. Managesieve seems to work fine, port 4190 is open on the server and it allows the tunderbird plugin to function, I can create and edit scripts with the plugin. For some reason it doesn't seem to auto-compile the scripts to binary form, but if I just need to do that manually I can live with it. I only mention the lack of auto-compiling in case that sheds light on what is wrong with the LDA or sieve. I'm running the current dovecot, 2.2.1 along with pigeonhole 0.4.0. Here is the config: root@hostname:/usr/local/dovecot-2.2.1# doveconf -n # 2.2.1: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 3.2.0-4-amd64 x86_64 Debian 7.0 auth_cache_size = 10 M auth_default_realm = mail.domain.com auth_mechanisms = plain login auth_socket_path = /usr/local/var/run/dovecot/auth-userdb debug_log_path = /dev/stderr default_internal_user = vpopmail default_login_user = vpopmail first_valid_gid = 89 first_valid_uid = 89 hostname = mail.domain.com last_valid_gid = 89 last_valid_uid = 89 lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes log_path = /dev/stderr mail_access_groups = 89 mail_debug = yes mail_gid = 89 mail_location = maildir:%h/Maildir mail_plugins = " quota" mail_privileged_group = 89 mail_uid = 89 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave spamtest spamtestplus vnd.dovecot.debug namespace inbox { inbox = yes location = prefix = separator = . } passdb { driver = vpopmail } plugin { quota = maildir:User quota quota_rule = *:storage=2G quota_warning = storage=95%% quota-warning 95 %u sieve = ~/.sieve/dovecot.sieve sieve_dir = ~/.sieve sieve_extensions = +spamtest +spamtestplus +relational +comparator-i;ascii-numeric +vnd.dovecot.debug } postmaster_address = postmaster(a)mail.domain.com protocols = imap pop3 lmtp sieve sendmail_path = /var/qmail/bin/sendmail service auth-worker { user = $default_internal_user } service auth { unix_listener auth-userdb { group = vchkpw mode = 0600 user = vpopmail } user = $default_internal_user } service managesieve-login { inet_listener sieve { port = 4190 } service_count = 1 vsz_limit = 64 M } ssl = required ssl_cert = </var/qmail/control/servercert.pem ssl_key = </var/qmail/control/servercert.priv userdb { args = quota_template=quota_rule=*:backend=%q driver = vpopmail } protocol lda { info_log_path = /dev/stderr log_path = /dev/stderr mail_plugins = " quota sieve" } protocol imap { mail_plugins = " quota imap_quota" } protocol pop3 { mail_plugins = " quota quota" } I've set the lda specific logs to /dev/stderr because I'm running dovecot through daemontools, and that is what it logs. Daemontools redirects /dev/stderr to /var/log/qmail/qmail-dovecot/current. I had tried logging to /var/log/dovecot/lda.log, that file exists, the directory is 775 dovecot:dovecot, but the file size remained 0. Very little appears in the dovecot logs with lda - root@hostname:/home/vpopmail/domains/domain.com/jim/.sieve# grep lda /var/log/qmail/qmail-dovecot/current |tai64nlocal 2013-05-16 11:05:49.432026500 May 16 11:05:49 auth: Debug: master in: USER 1jim(a)domain.com service=lda 2013-05-16 11:29:32.386361500 May 16 11:29:32 auth: Debug: master in: USER 1jim(a)domain.com service=lda 2013-05-16 11:54:03.145741500 May 16 11:54:03 auth: Debug: master in: USER 1jim(a)domain.com service=lda 2013-05-16 12:33:40.274543500 May 16 12:33:40 auth: Debug: master in: USER 1jim(a)domain.com service=lda 2013-05-16 12:47:07.202036500 May 16 12:47:07 auth: Debug: master in: USER 1jim(a)domain.com service=lda 2013-05-16 13:40:44.548948500 May 16 13:40:44 auth: Debug: master in: USER 1jim(a)domain.com service=lda 2013-05-17 11:50:31.073410500 May 17 11:50:31 auth: Debug: master in: USER 1jim(a)domain.com service=lda The sieve issue is as follows: I have a very simple sieve script. the managaesieve utility accepts the script, here is the contents of the $HOME/.sieve directory: root@hostname:/home/vpopmail/domains/domain.com/jim/.sieve# ls -al total 20 drwx------ 3 vpopmail vchkpw 4096 May 18 02:24 . drwx------ 5 vpopmail vchkpw 4096 May 18 09:39 .. lrwxrwxrwx 1 vpopmail vchkpw 16 May 18 02:22 dovecot.sieve -> night-test.sieve -rw------- 1 vpopmail vchkpw 303 May 18 02:22 dovecot.svbin -rw------- 1 vpopmail vchkpw 315 May 18 02:24 night-test.sieve drwx------ 2 vpopmail vchkpw 4096 May 18 02:24 tmp The contents of dovecot.sieve itself are: root@hostname:/home/vpopmail/domains/domain.com/jim/.sieve# cat dovecot.sieve # # 2013-5-17 # require ["fileinto", "envelope", "vnd.dovecot.debug"]; if header :contains ["from"] "sub1.domain.com" { debug_log "match happened and syntax changed for testing purposes"; fileinto "INBOX.folder2"; } else { debug_log "can't catch a cold when wet snowy and cold"; keep; } The compile of the script works fine as user vpopmail: vpopmail@hostname:~/domains/domain.com/jim/.sieve$ sievec dovecot.sieve /tmp/dovecot.svbin sievec(vpopmail): Debug: Loading modules from directory: /usr/local/lib/dovecot sievec(vpopmail): Debug: Module loaded: /usr/local/lib/dovecot/lib10_quota_plugin.so sievec(vpopmail): Debug: Effective uid=89, gid=89, home=/home/vpopmail sievec(vpopmail): Debug: Quota root: name=User quota backend=maildir args= sievec(vpopmail): Debug: Quota rule: root=User quota mailbox=* bytes=2147483648 messages=0 sievec(vpopmail): Debug: Quota warning: bytes=2040109465 (95%) messages=0 reverse=no command=quota-warning 95 vpopmail sievec(vpopmail): Debug: Quota grace: root=User quota bytes=214748364 (10%) A diff between dovecot.svbin and /tmp/dovecot.svbin shows no difference. Neither of the debug lines show up anywhere in the logs. When I send an email from sub1.domain.com to this server, it ends up in the main inbox rather than INBOX.folder2. Interestingly, if I run sieve-test on the mail, it tells me it should have been moved to INBOX.folder2: vpopmail@hostname:~/domains/domain.com/jim/Maildir/cur$ sieve-test ../../.sieve/dovecot.sieve 1368888104.11471.hostname\,S\=1235\:2\,a sieve-test(vpopmail): Debug: Loading modules from directory: /usr/local/lib/dovecot sieve-test(vpopmail): Debug: Module loaded: /usr/local/lib/dovecot/lib10_quota_plugin.so sieve-test(vpopmail): Debug: Effective uid=89, gid=89, home=/home/vpopmail sieve-test(vpopmail): Debug: Quota root: name=User quota backend=maildir args= sieve-test(vpopmail): Debug: Quota rule: root=User quota mailbox=* bytes=2147483648 messages=0 sieve-test(vpopmail): Debug: Quota warning: bytes=2040109465 (95%) messages=0 reverse=no command=quota-warning 95 vpopmail sieve-test(vpopmail): Debug: Quota grace: root=User quota bytes=214748364 (10%) sieve-test(vpopmail): Debug: Quota root: name=User quota backend=maildir args= sieve-test(vpopmail): Debug: Quota rule: root=User quota mailbox=* bytes=2147483648 messages=0 sieve-test(vpopmail): Debug: Quota warning: bytes=2040109465 (95%) messages=0 reverse=no command=quota-warning 95 raw mail user sieve-test(vpopmail): Debug: Quota grace: root=User quota bytes=214748364 (10%) sieve-test(vpopmail): Debug: none: root=, index=, indexpvt=, control=, inbox=, alt= dovecot: line 6: info: DEBUG: match happened and syntax changed for testing purposes. Performed actions: * store message in folder: INBOX.folder2 Implicit keep: (none) sieve-test(vpopmail): Info: final result: success And yes, INBOX.folder exists: vpopmail@hostname:~/domains/domain.com/jim/Maildir/cur$ ls -al ../.INBOX.folder2/ total 28 drwx------ 5 vpopmail vchkpw 4096 May 14 10:33 . drwx------ 15 vpopmail vchkpw 4096 May 18 10:42 .. drwx------ 2 vpopmail vchkpw 4096 May 14 10:20 cur -rw------- 1 vpopmail vchkpw 232 May 17 08:07 dovecot.index.log -rw------- 1 vpopmail vchkpw 17 May 14 10:33 dovecot-uidlist -rw------- 1 vpopmail vchkpw 0 May 14 10:20 maildirfolder drwx------ 2 vpopmail vchkpw 4096 May 14 10:20 new drwx------ 2 vpopmail vchkpw 4096 May 14 10:20 tmp Here's the file that calls dovecot-lda for user jim: vpopmail@hostname:~/domains/domain.com/jim$ cat .qmail-default |/var/qmail/bin/preline -f /usr/local/libexec/dovecot/dovecot-lda -d $EXT@$USER Both /var/qmail/bin/preline and /usr/local/libexec/dovecot/dovecot-lda exist. Any idea why my sieve doesn't seem to take effect? Thanks for reading.

2 3

Re: [Dovecot] Outlook 2013 - mounting folders with XLIST
by Hajo Locke 21 May '13

21 May '13

Hello, >> i do some tests with dovecot 2.1.7 and activated a default special-use >> config. To get it work with outlook 2013, i also added XLIST to imap >> capability string. basically this is working. >> >> is somebody also using special-use folders successful with outlook 2013? > yes, testet a few times, works fine, without Junk folder , cause > outlook wants this handled by it own, but i ve seen reg patches to > change this My serverside setup now is completed. I did a lot of tests last weeks and experienced some strange behaviour of some clients. Outlook 2013 is only working when adding XLIST manually to imap_capability imap_capability = +XLIST This is because outlook 2013 not supports rfc 6154 but the deprecated XLIST standard invented by google. So the problem with junkfolder is not a bug in Outlook 2013, in rfc 6154 spamfolder is tagged by \Junk, in XLIST standard \Spam is used. I did see that when using a gmailaccount in outlook 2013. Adding XLIST capability to dovecot seems to be a problem for other Clients. k9 is able to work with rfc 6154 servers. But if k9 finds XLIST and SPECIAL-USE together in capabilitystring it seems to prefer XLIST requests. Because of dovecot is accepting XLIST requests, but outputs rfc 6154 details, k9 seems to be confused and dont finds special Folders. rfc 6154 is similar but not identical to XLIST. If you dont test with really individual foldernames, you get tricked by clients behaviour. I looked around and the most imap-servers of hosting companies etc. provide XLIST feature, Special-USE unfortunately only a few. So i did now some changes to dovecot sources on my own. I added \Spam as allowed special-use attribute and created a new function for XLIST Requests. So if XLIST is requested, Clients gets lines of output with XLIST and \Junk is replaced with \Spam. So all is done in the code and i dont need to change my userdb-config. Testing this server with different clients was successful. All of them did find their special folders and worked fine, outlook 2013 also finds spamfolder now. So this changes contribute to consolidate a deprecated standard but i have to find a way where all users can benefit from new features. This is not a request to change something in dovecot, this is a call to decision makers to support one rfc Standard. Hajo

1 0

[Dovecot] Configure dovecot to provide SASL authentication
by Peter Skensved 21 May '13

21 May '13

Hi, I'm trying to get dovecot to provide SASL authentication for postfix My setup appears to be working but I'm not 100% certain I've got it right. I've come across several examples for dovecot version 1 but I'm running 2.0.9. The output of doveconf -n is here : 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-279.2.1.el6.x86_64 x86_64 CentOS release 6.3 (Final) auth_debug = yes auth_verbose = yes disable_plaintext_auth = no mbox_write_locks = fcntl passdb { driver = pam } protocols = imap service auth { unix_listener /var/spool/postfix/private/auth { mode = 0666 } } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } Specifically : are the "service auth", userdb and passdb sections correct ? And the mode ? Or is it too permissive ? For completeness the postfix setup is here : smtpd_sasl_auth_enable = yes broken_sasl_auth_clients = yes smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous # smtpd_delay_reject = yes smtpd_helo_required = yes smtpd_helo_restrictions = permit_mynetworks, reject_non_fqdn_helo_hostname, reject_invalid_helo_hostname, permit # smtpd_sender_restrictions = permit_mynetworks, reject_non_fqdn_sender, reject_unknown_sender_domain, permit # smtpd_recipient_restrictions = reject_unauth_pipelining, reject_non_fqdn_recipient, reject_unknown_recipient_domain, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination, permit # peter ---- Peter Skensved Dept. of Physics, Queen's University, Kingston, Ontario, Canada

3 2

[Dovecot] How to configure ssl cert chain in dovecot 10-ssl.conf file
by Bu Xiaobing 21 May '13

21 May '13

Hi there, Does anyone know how to do this: "Put all the certificates in the ssl_cert file. For example when using a certificate signed by TDC the correct order is: Dovecot's public certificate TDC SSL Server CA TDC Internet Root CA Globalsign Partners CA " I try to set these parameters in the conf.d/10-ssl.conf as below, but it seems doesn't work. --- ssl_cert = </etc/pki/dovecot/certs/mail.mymailserver.com.crt ssl_cert = </etc/ssl/certs/dovecot/sub.class1.server.ca.pem ssl_cert = </etc/ssl/certs/dovecot/ca.pem ---- I even cat mail.mymailserver.com.crt sub.class1.server.ca.pem certs/dovecot/ca.pem into one singe file, and define ssl_cert = < /path/to/the/singcertfile.pem, but it doesn't work too. In my apache httpd server httpd.conf file I can define: -- SSLCertificateChainFile /etc/pki/dovecot/certs/sub.class1.server.ca.pem SSLCACertificateFile /etc/pki/dovecot/certs/ca.pem -- And it well work fine. Thinks for any suggest. Bu Xiaobing

2 3

[Dovecot] Pigeonhole: extprograms - pipe
by Anes Mukhametov 20 May '13

20 May '13

Hello! I've tried to use extprograms pipe feature but stuck with "Broken pipe" errors in mail log: May 17 15:18:57 backend1 dovecot: lmtp(20338, user(a)domain.tld) Debug: 3VMVFWFKllFyTwAArRg8UA: sieve: action pipe: running program: learn May 17 15:18:57 backend1 dovecot: script: Error: write(response) failed: Broken pipe May 17 15:18:57 backend1 dovecot: lmtp(20338, user(a)domain.tld) 3VMVFWFKllFyTwAArRg8UA: sieve: execution of script /data/mail/storage/domain/user(a)domain.tld/.dovecot.sieve;name=main script failed, but implicit keep was successful (user logfile /data/mail/storage/domain/buser(a)domain.tld/.dovecot.sieve.log should reveal additional details) /data/mail/storage/domain/buser(a)domain.tld/.dovecot.sieve.log: error: msgid=<c7cd36f19be8164addf091a646b8b284(a)domain.tld>: pipe action: failed to pipe message to program `learn': refer to server log for more information. [2013-05-17 15:18:57] ham user(a)domain.tld 50796. Sieve script contents: require ["fileinto","copy","mailbox","vnd.dovecot.pipe"]; if anyof (header :is "Subject" "ham") { pipe :try "learn" ["ham"]; fileinto "INBOX/ham"; stop; } Sieve plugin config uncommented conents: sieve_plugins = sieve_extprograms *sieve_pipe_socket_dir = sieve-pipe* # Define the executed script as parameter to the sieve service executable = script /etc/dovecot/scripts/spam.sh # Use some unprivileged user for executing the program user = nobody # The unix socket located in the sieve_pipe_socket_dir (as defined in the # plugin {} section above) unix_listener sieve-pipe/learn { # LDA/LMTP must have access user = nobody mode = 0777 } } spam.sh is message processing script which interacts with spamassassin. I've tested pipe with spam.sh that redirects stdin to /dev/null and returns 0 but errors were logged anyway. Note that spam.sh runs, getting the message from sieve and processing it to spamassassin without a problem, but "broken pipe" is being logged.

3 4

Re: [Dovecot] Configure dovecot to provide SASL
by Peter Skensved 20 May '13

20 May '13

> > > Am 19.05.2013 17:51, schrieb Peter Skensved: > > service auth { > > unix_listener /var/spool/postfix/private/auth { > > mode = 0666 > > } > > chmod 666 is always a very bad idea > > > service auth { > unix_listener /var/spool/postfix/private/auth { > mode = 0660 > user = postfix > group = postfix > } > } > Thanks for the reply - - all the other sockets in /var/spool/postfix/private have mode 666 ( and the directory itself mode 700 ) but that is probably a question for the postfix list.... peter

1 0

[Dovecot] v2.2.2 + dsync version incompatibility
by Timo Sirainen 20 May '13

20 May '13

Looks like dsync v2.2.2 isn't fully compatible with earlier dsync versions, unless you add: http://hg.dovecot.org/dovecot-2.2/rev/e0156c479a12

1 0

[Dovecot] Linking mdbox directories
by Alex Crow 20 May '13

20 May '13

Hi Timo/list, We have a scenario in which some email accounts on dovecot (stored in mdbox, separate paths for indexes, email, ALT storage and also using SIS for attachments, LDAP directory) need their names changed. I know we could just change the mail LDAP attribute (and leave mailMessageStore alone) so they keep the same directories on disk, but this would throw a spanner in the works for our backups. Would it be possible to create a hard link of the user's directories under the new name, and change the LDAP mailMessageStore attribute to point to these without stopping and starting dovecot? And after a while unlink the original locations? Or would this mess up dovecot's internal state? Thanks Alex -- This message is intended only for the addressee and may contain confidential information. Unless you are that person, you may not disclose its contents or use it in any way and are requested to delete the message along with any attachments and notify us immediately. "Transact" is operated by Integrated Financial Arrangements plc. 29 Clement's Lane, London EC4N 7AE. Tel: (020) 7608 4900 Fax: (020) 7608 5300. (Registered office: as above; Registered in England and Wales under number: 3727592). Authorised and regulated by the Financial Conduct Authority (entered on the Financial Services Register; no. 190856).

2 2

[Dovecot] doveadm altmove to gzipped-mdbox
by Claus 20 May '13

20 May '13

Hi, im wondering if it's possible to store old messages in a compressed mdbox on alternate storage. The main storage is uncompressed mdbox. I tried something like: doveadm -Dv -o "plugin/zlib_save=gz" altmove -u testuser sentbefore 8d Could someone tell me if it's possible and give me a hint how this can be done? I tried this with dovecot-2.2 Claus

2 2

[Dovecot] Empty file in maildirs
by Roel Wagenaar 20 May '13

20 May '13

I am cleaning up some old users, and found that in every maildir folder there is an empty file called maildirfolder, created at the time the original dovecot was installed. Is this empty file necessary for dovecot, or is it left there in an upgrade proces and can it be removed? Dovecot 2.1.7, on Debian wheezy. -- Roel Wagenaar, Linux-User #469851 with the Linux Counter; http://linuxcounter.net/ Antw.: Omdat het de volgorde verstoord waarin mensen tekst lezen. Vraag: Waarom is top-posting een slechte gewoonte? Antw.: Top-posting. Vraag: Wat is het meest ergerlijke in e-mail? If we aren't supposed to eat amimals, why are they made with meat?

2 1

[Dovecot] v2.2.2 released
by Timo Sirainen 20 May '13

20 May '13

http://dovecot.org/releases/2.2/dovecot-2.2.2.tar.gz http://dovecot.org/releases/2.2/dovecot-2.2.2.tar.gz.sig It's been a while since v2.2.1. I think all of the bad bugs in v2.2 series should be fixed by now, so here's a new release. I think there are still some small URLAUTH bugs left though, so you might want to wait before enabling it in production (imap_urlauth_host is empty by default, which disables it). + zlib: Keep the last mail cached uncompressed in a temp file. This fixes performance when doing small partial fetches from a large mail. + acl: If plugin { acl_defaults_from_inbox = yes } is set, get the default ACLs for private and shared namespaces from the user's INBOX. (This probably will become default in v2.3.) + pop3: Added pop3_deleted_flag setting to switch POP3 deletions to only hide the messages from POP3, but still be visible via IMAP. - ACL plugin: Mailbox creation wasn't actually checking any ACLs and always succeeded (due to some v2.2 API changes). The created mailbox couldn't have been accessed though, so this couldn't have caused any data leak. - IMAP: Various URLAUTH fixes. - IMAP: Fixed a hang with invalid APPEND parameters. - IMAP LIST-EXTENDED: INBOX was never listed with \Subscribed flag. - mailbox_list_index=yes still caused crashes. - maildir: Fixed a crash after dovecot-keywords file was re-read. - maildir: If files had reappeared unexpectedly to a Maildir, they were ignored until index files were deleted. - Maildir: Fixed handling over 26 keywords in a mailbox. - Maildir++: Fixed mail_shared_explicit_inbox=no - namespace { prefix="" list=no } was listing mailboxes. - imap/pop3-login proxying: Fixed a crash if TCP connection succeeded, but the remote login timed out. - Case-insensitive search/sort didn't work correctly for all unicode characters, as specified by i;unicode-casemap comparator. If full text search indexes were used, they need to be rebuilt for old mails to be handled correctly. (This bug has existed always in Dovecot.)

2 3

[Dovecot] Sieve was installed but doesn't work or log
by Jim McNamara 18 May '13

18 May '13

Hello everyone. I have dovecot version 1.2.8 installed from source. This morning I installed the sieve plugin to sort emails, and though the install reported no errors, the plugin doesn't seem to function, and no mention of it is made in the logs when I turn on verbose logging. dovecot --version 1.2.8 dovecot -n # 1.2.8: /usr/local/etc/dovecot.conf # OS: Linux 3.2.0-4-amd64 x86_64 Debian 7.0 base_dir: /usr/local/var/run/dovecot/ log_path: /dev/stderr info_log_path: /dev/stderr log_timestamp: protocols: imap imaps pop3s listen(default): 127.0.0.1:143 listen(imap): 127.0.0.1:143 listen(pop3): * ssl_listen(default): 192.168.1.1:993 ssl_listen(imap): 192.168.1.1:993 ssl_listen(pop3): 192.168.1.1:995 ssl_cert_file: /var/qmail/control/servercert.pem ssl_key_file: /var/qmail/control/servercert.pem ssl_cipher_list: ALL:!LOW verbose_ssl: yes login_dir: /usr/local/var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login verbose_proctitle: yes first_valid_uid: 89 last_valid_uid: 89 mail_location: maildir:~/Maildir mail_debug: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 pop3_uidl_format(default): %08Xu%08Xv pop3_uidl_format(imap): %08Xu%08Xv pop3_uidl_format(pop3): %v-%u namespace: type: private separator: . prefix: INBOX. inbox: yes list: yes subscriptions: yes lda: postmaster_address: postmaster(a)mail.domain.com hostname: mail.domain.com mail_plugins: sieve mail_plugin_dir: /usr/local/lib/dovecot/lda deliver_log_format: msgid=%m: %$ sieve: /home/vpopmail/domains/%d/%n/sieve sieve_global_path: /usr/local/etc/default.sieve log_path: /var/log/qmail/sieve/dovecot.log info_log_path: /var/log/qmail/sieve/dovecot.log auth default: user: vpopmail passdb: driver: vpopmail userdb: driver: vpopmail plugin: quota: maildir Here is the config.log from sieve root@myplace:/usr/local# head dovecot-1.2-sieve-0.1.19/config.log This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by Dovecot Sieve configure 0.1.19, which was generated by GNU Autoconf 2.67. Invocation command line was $ ./configure --with-dovecot=../dovecot-1.2.8/ That compiled cleanly, then make and make install also proceeded without error. With verbose logging enabled, the only times "sieve" appeared in the logs was when I tried to load it as a plugin for imap - grep sieve /var/log/qmail/qmail-dovecot/current |tai64nlocal 2013-05-14 09:20:05.091635500 FPlugin sieve not found from directory /usr/local/lib/dovecot/imap 2013-05-14 09:20:06.120848500 FPlugin sieve not found from directory /usr/local/lib/dovecot/imap 2013-05-14 09:20:07.142465500 FPlugin sieve not found from directory /usr/local/lib/dovecot/imap 2013-05-14 09:20:08.164247500 FPlugin sieve not found from directory /usr/local/lib/dovecot/imap Once I removed it from being loaded as an imap plugin and used it only as an lda plugin, it hasn't appeared in the dovecot logs. It also isn't logging where I asked it to in the config file (log_path: /var/log/qmail/sieve/dovecot.log, or info_log_path: /var/log/qmail/sieve/dovecot.log), but that files was touched and all directories below /var/log/qmail/sieve have the correct permissions for dovecot to write there: ls -al /var/log/qmail/sieve/ total 16 drwxr-xr-x 2 dovecot dovecot 4096 May 14 11:04 . drwxr-xr-x 7 qmaill root 12288 May 14 11:04 .. -rw-r--r-- 1 dovecot dovecot 0 May 14 11:04 dovecot.log Can anyone suggest an error they see or what I can do to get my errors with the sieve config logged somewhere? Thanks for your help and insight.

2 4

[Dovecot] (no subject)
by Anes Mukhametov 17 May '13

17 May '13

Hello! I've tried to use extprograms pipe feature but stuck with "Broken pipe" errors in mail log: May 17 15:18:57 backend1 dovecot: lmtp(20338, user(a)domain.tld) Debug: 3VMVFWFKllFyTwAArRg8UA: sieve: action pipe: running program: learn May 17 15:18:57 backend1 dovecot: script: Error: write(response) failed: Broken pipe May 17 15:18:57 backend1 dovecot: lmtp(20338, user(a)domain.tld) 3VMVFWFKllFyTwAArRg8UA: sieve: execution of script /data/mail/storage/domain/user(a)domain.tld/.dovecot.sieve;name=main script failed, but implicit keep was successful (user logfile /data/mail/storage/domain/buser(a)domain.tld/.dovecot.sieve.log should reveal additional details) /data/mail/storage/domain/buser(a)domain.tld/.dovecot.sieve.log: error: msgid=<c7cd36f19be8164addf091a646b8b284(a)domain.tld>: pipe action: failed to pipe message to program `learn': refer to server log for more information. [2013-05-17 15:18:57] ham user(a)domain.tld 50796. Sieve script contents: require ["fileinto","copy","mailbox","vnd.dovecot.pipe"]; if anyof (header :is "Subject" "ham") { pipe :try "learn" ["ham"]; fileinto "INBOX/ham"; stop; } Sieve plugin config uncommented conents: sieve_plugins = sieve_extprograms *sieve_pipe_socket_dir = sieve-pipe* # Define the executed script as parameter to the sieve service executable = script /etc/dovecot/scripts/spam.sh # Use some unprivileged user for executing the program user = nobody # The unix socket located in the sieve_pipe_socket_dir (as defined in the # plugin {} section above) unix_listener sieve-pipe/learn { # LDA/LMTP must have access user = nobody mode = 0777 } } spam.sh is message processing script which interacts with spamassassin. I've tested pipe with spam.sh that redirects stdin to /dev/null and returns 0 but errors were logged anyway. Note that spam.sh runs, getting the message from sieve and processing it to spamassassin without a problem, but "broken pipe" is being logged.

1 0

[Dovecot] Ubuntu-12.04-LTS repos with Dovecot-2.2 and Pigeonhole
by listas＠adminlinux.com.br 17 May '13

17 May '13

Hi, I would like to take advantage of new features in Dovecot 2.2 on my servers. But I'm having difficulties to build packages for Ubuntu-12.04-LTS. Does anyone know a repository that has new stable versions for Dovecot and Pigeonhole ? Thanks ! --  Thiago Henrique adminlinux.com.br

4 4

Re: [Dovecot] question about /var/spool/mail/xxx
by Joseph Tam 17 May '13

17 May '13

Richard Feng@eBay writes: > this is Redhat 6.3 > I installed sendmail and dovecot. > but sendmail can continue send mail as MTA > all mails go to /var/spool/mail OK. > this is problem for dovecot. dovecot cannot get it goto dovecot inbox. > > if setup mailbox poing to /var/spool/mail/%u, it is workable I'm guessing that you're sending new mail to mbox formatted files in /var/spool/mail/%u (using dovecot LDA?). > but if set up maildir to somewhere else ,I cannot receive mail by dovecot. You lost me. How did you "set up maildir to somewhere else"? You ought to supply configurations (output of dovecot -n), and log entries of the problem. Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] Quota not working with dict proxy
by Chris Richards 16 May '13

16 May '13

Hello all, I'm sure this has been covered somewhere before, but my googlefu is not up to the challenge. Basically, I'm trying to configure quota plugin to use a dictionary service (specifically proxy with mysql) so that I can store the quota usage in a database and use that information in a lookup for postfix to reject mail if over quota. I'm doing this because postfix+avamis+dovecot setup with amavis re-injecting into postfix results in mail being effectively accepted before dovecot lmtp knows if mailbox is full. I'm currently using quota maildir: quota = maildir:User quota and this works; doveadm -Df tab quota get -u 'user@domain' Quota name Type Value Limit % User quota STORAGE 55388 204800 27 User quota MESSAGE 4883 - 0 When I use quota dict: quota = dict:User quota:%u:proxy::quota I get this: "doveadm -f tab quota get -u user@domain" Quota name Type Value Limit % User quota STORAGE 0 204800 0 User quota MESSAGE 0 - 0 So far so good. But manually setting database entry to values retrieved above with maildir quota results in this: Quota name Type Value Limit % User quota STORAGE 54 204800 0 User quota MESSAGE 4883 - 0 I'm guessing this is returning values in KB, so that makes sense, I guess. Attempting to recalc quota on one account using command: "doveadm -f tab quota recalc -u user@domain" returns with nothing, and when I repeat 'quota get' command, it says: doveadm(user@domain): Fatal: User doesn't exist Err............what?! Indeed, looking in the database shows the account in question was actually DELETED! Obviously, I've got something messed here, but I don't know what. I need some guidance here. Dovecot version is 2.1.12 Here is my config: # 2.1.12: /etc/dovecot/dovecot.conf # OS: Linux 3.7.5-hardened-r1 x86_64 Gentoo Base System release 2.1 ext4 auth_master_user_separator = * auth_mechanisms = plain login auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@& auth_verbose_passwords = plain default_process_limit = 200 dict { quota = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext } disable_plaintext_auth = no login_greeting = Awaiting command... mail_location = maildir:/home/vmail/%d/%n/Maildir mail_plugins = " quota" mail_privileged_group = 100 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = INBOX. separator = . type = private } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { expire = Trash 7 expire2 = Trash/* 7 expire3 = Spam 7 quota = dict:User quota:%u:proxy::quota quota_rule = *:storage=200M quota_warning = storage=99%% quota-warning 99 %n %d quota_warning2 = storage=95%% quota-warning 95 %n %d quota_warning3 = storage=80%% quota-warning 80 %n %d quota_warning4 = -storage=95%% quota-warning 'less than 95' %n %d sieve = ~/.dovecot.sieve sieve_default = /home/vmail/dovecot/sieve/default.sieve sieve_dir = ~/sieve sieve_global_dir = /home/vmail/dovecot/sieve } protocols = imap pop3 sieve lmtp service auth-worker { user = $default_internal_user } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } unix_listener auth-userdb { group = dovecot mode = 0666 user = dovecot } user = $default_internal_user } service dict { unix_listener dict { mode = 0600 user = vmail } } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0600 user = postfix } } service quota-warning { executable = script /etc/dovecot/quota-warning.sh unix_listener quota-warning { user = vmail } user = dovecot } ssl_cert = </etc/ssl/dovecot/server.pem ssl_key = </etc/ssl/dovecot/server.key userdb { driver = prefetch } userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol lmtp { mail_plugins = sieve quota postmaster_address = postmaster@domain } protocol lda { mail_plugins = " quota sieve quota" } protocol imap { mail_max_userip_connections = 20 mail_plugins = " quota quota imap_quota" } protocol pop3 { mail_plugins = " quota quota" } >From dovecot-dict-sql.conf.ext: connect = host=localhost dbname=maildb user=dbuser password=dbpass # CREATE TABLE quota ( # username varchar(100) not null, # bytes bigint not null default 0, # messages integer not null default 0, # primary key (username) # ); map { pattern = priv/quota/storage table = email username_field = address value_field = quota_bytes } map { pattern = priv/quota/messages table = email username_field = address value_field = quota_messages } # CREATE TABLE expires ( # username varchar(100) not null, # mailbox varchar(255) not null, # expire_stamp integer not null, # primary key (username, mailbox) # ); map { pattern = shared/expire/$user/$mailbox table = email value_field = expire_stamp fields { address = $user maildir = $mailbox } } Other than some guesswork, I've not got the FOGGIEST idea what the settings in the file actually mean; it doesn't seem to be documented anywhere. Also, the quota plugin settings, at least with respect to using a proxy service, don't seem to be real explanatory either, e.g. the reason I'm using %u for the user is because I stumbled across a post suggesting that leaving it blank would result in just getting the username instead of the username@domain. This is not at all obvious from the documentation, IMO. The docs would benefit greatly from some example use cases (no, I'm not volunteering; I'm TERRIBLE with documentation ;) ). Anyway, if someone could proffer some help or at least guidance here, I'd be very grateful.

2 6

[Dovecot] dovecot 2.2.0 corrupts mailboxes?
by manu＠netbsd.org 16 May '13

16 May '13

Hi On april 17th, I upgraded from dovecot 2.1.13 to 2.2.0. Since that time, I had two different users that reported received three incident of messages that disapeared from their mailboxes. The mailbox format is mbox on local FFS filesystem (no NFS), and I use filesystem quotas (but both users are far from filling their quotas). When the message disapeared, it was always a whole rand of dates. On the last incident reported, the user also saw some message being duplicated many times. There is something interesting in the logs: May 4 20:16:30 volanges dovecot: imap(jdoe): Error: Cached message size smaller than expected (2000 < 8063) May 4 20:16:30 volanges dovecot: imap(jdoe): Error: Corrupted index cache file /mail/indexes/jdoe/.imap/INBOX/dovecot.index.cache: Broken physical size for mail UID 141869 May 4 20:19:48 volanges dovecot: imap(jdoe): Error: Cached message size smaller than expected (9711 < 16248) May 4 20:19:48 volanges dovecot: imap(jdoe): Error: Corrupted index cache file /mail/indexes/jdoe/mail/.imap/Arxiv/dovecot.index.cache: Broken physical size for mail UID 4383 May 4 21:14:35 volanges dovecot: imap(jdoe): Error: Cached message size smaller than expected (1878 < 8066) May 4 21:14:35 volanges dovecot: imap(jdoe): Error: Corrupted index cache file /mail/indexes/jdoe/mail/.imap/CNRS/dovecot.index.cache: Broken physical size for mail UID 290 May 4 21:15:17 volanges dovecot: imap(jdoe): Error: Cached message size smaller than expected (17285 < 24440) May 4 21:15:17 volanges dovecot: imap(jdoe): Error: Corrupted index cache file /mail/indexes/jdoe/mail/.imap/Commandes/dovecot.index.cache: Broken physical size for mail UID 680 Does that ring a bell? I am tempted to downgrade to 2.1.13. Does it makes sense? Is it safe to do so? -- Emmanuel Dreyfus http://hcpnet.free.fr/pubz manu(a)netbsd.org

6 12

[Dovecot] [PATCH] example-config: fix to also distribute auth-dict.conf.ext in
by Christian Wiese 16 May '13

16 May '13

Hi, When trying to patch the dovecot 2.2.1 release with latest upstream patches I generated out of the repository, the patch fails to apply, because 'doc/example-config/conf.d/auth-dict.conf.ext' is not distributed within the release tarball. Attached patch should fix the issue. Cheers, Chris

1 0

[Dovecot] quota with imapc
by pvsuja 16 May '13

16 May '13

Dear dovecot team, I have set up my mail system with a mail gateway connecting to mail server using imapc. Now I need my web mail client to show up the quota info. I enabled quota plugins in dovecot.conf. The problem is since all mails reside in the server, the web mail which is in mail gateway always shows the quota as 0. Is there any way the plugin will get quota info from the mail server? I am attaching my conf ## Dovecot configuration file in mail_uid = imapproxy mail_gid = imapproxy mail_home = /home/imapproxy/%u mail_location = imapc:~/imapc protocols = imap ## ## imapc settings ## imapc_host = mailserver.example.com imapc_port = 143 imapc_ssl = starttls imapc_ssl_ca_dir = /etc/postfix/certs ## ## auth settings ## auth_mechanisms = plain login passdb { driver = imap args = host=mailserver.example.com ssl=starttls ssl_ca_dir=/etc/postfix/certs default_fields = userdb_imapc_user=%u userdb_imapc_password=%w ssl=starttls } userdb { driver = prefetch } mail_plugins = $mail_plugins quota plugin { quota = maildir:User quota quota_rule = *:storage=200M } protocol imap { # Space separated list of plugins to load (default is global mail_plugins). mail_plugins = $mail_plugins imap_quota } ## ## SSL settings ## ssl = required disable_plaintext_auth = yes #verbose_ssl = yes ssl_cert = </etc/postfix/certs/public_cert.pem ssl_key = </etc/postfix/certs/private_key.pem ssl_cipher_list = ALL:!LOW:!SSLv2:!EXP:!aNULL Greetings. -- View this message in context: http://dovecot.2317879.n4.nabble.com/quota-with-imapc-tp42280.html Sent from the Dovecot mailing list archive at Nabble.com.

2 2

[Dovecot] question about /var/spool/mail/xxx
by Richard Feng＠eBay 16 May '13

16 May '13

this is Redhat 6.3 I installed sendmail and dovecot. but sendmail can continue send mail as MTA all mails go to /var/spool/mail this is problem for dovecot. dovecot cannot get it goto dovecot inbox. if setup mailbox poing to /var/spool/mail/%u, it is workable but if set up maildir to somewhere else ,I cannot receive mail by dovecot.

1 0

[Dovecot] Looking for a good way to manage passwords for CRAM-MD5
by Steinar Bang 15 May '13

15 May '13

I prefer not to use clear text passwords, even over an encrypted connection. With IMAP, the only such mechanism with widespread client support is CRAM-MD5 (please correct my if I'm wrong... I'd love to be corrected here...). On the dovecot 2 wiki, the only way I've found to implement CRAM-MD5 support, is to use a passwd-like file: http://wiki2.dovecot.org/HowTo/CRAM-MD5 I am running a small IMAP server used by my family. As long as I was the single user on the IMAPd, manually managing the passwd file as doable (if a bit cumbersome). With 2-5 users, I'm looking for a more elegant solution. Does anyone have a similar situation, and a solution they would like to share (config/HOWTO)? Here are the possibilities that comes to mind: 1. Create a web interface to change the password (does anyone know of a ready-made solution for this that they could recommend?) 2. Convince PAM to update the dovecot HMAC-MD5 password file as well as the regular system password file (my dovecot runs on a debian stable "wheezy" system. In theory this should be possible, but it is very hard to find documentation on what PAM modules exist, and how to write a new one, and if it is possible to chain modules in PAM, ie. use one module to update-this-passwd-file and then use a different module to update a different passwd file) 3. Use LDAP, which I think can also support CRAM-MD5 when using password lookups http://wiki2.dovecot.org/AuthDatabase/LDAP/PasswordLookups (learning how to set up LDAP is something I have avoided for years, because it looks awfully complex and time consuming) I haven't looked into using databases, SQL, or key-value store, because they seem like a more cumbersome way to do the same thing as passwd files. But I am aware that this assumption could be wrong. It could e.g. be easier to make the web interface idea work with a database manager, than messing around with setuid bits to safely update a passwd file owned and touchable only by the dovecot user. Thanks for any and all responses! - Steinar

8 12

[Dovecot] dovecot 2.0 -> 2.1 sieve problem
by Trever L. Adams 15 May '13

15 May '13

I had a completely working setup before. I upgraded, now I get: Error: 7LUaNYqHklG6EAAApwKjnA: sieve: execution of script (null) failed, but implicit keep was successful sieve = /home/vmail/%Ld/%Ln/.dovecot.sieve sieve_dir = /home/vmail/%Ld/%Ln/sieve (this was ~/sieve) I am not quite sure what is going on. Is anyone else seeing this? Any idea on what has changed? (I am not readily seeing it in changelogs or mailing lists.) Thank you, Trever -- "A right is not what someone gives you; it's what no one can take from you." -- Ramsey Clark

3 11

[Dovecot] 2.2.1 and quota-status
by Christian Rößner 15 May '13

15 May '13

Hi, maybe this question already came up and I missed it in my mails, but if not… : I have configured Quota for Dovecot since decades and now with the new policy service, I wanted to include this into Postfix. I have followed Ralf's Blog and there a two Problems: I need to do this: ls -la /var/run/dovecot/config srw------- 1 root root 0 May 14 11:06 /var/run/dovecot/config chown vmail /var/run/dovecot/config ls -la /var/run/dovecot/config srw------- 1 vmail root 0 May 14 11:06 /var/run/dovecot/config Where can I tell Dovecot to set user vmail here? If I do not do this, I get the following error in the logs: May 14 10:54:50 mx0 dovecot: quota-status(c(a)roessner-network-solutions.com): Error: user c(a)roessner-network-solutions.com: Error reading configuration: net_connect_unix(/var/run/dovecot/config) failed: Permission denied Also the following test does not succeed: telnet localhost 12340 Trying ::1... Connected to localhost. Escape character is '^]'. request=smtpd_access_policy sender=foo(a)bar.tld recipient=c(a)roessner-network-solutions.com size=10000000000 action= ^] telnet> quit Connection closed. Nothing in the logs. Just an empty answer. Here is my config: doveconf -n # 2.2.1: /etc/dovecot/dovecot.conf # OS: Linux 3.8.6-hardened x86_64 Gentoo Base System release 2.2 auth_master_user_separator = * auth_mechanisms = plain login cram-md5 digest-md5 ntlm auth_verbose = yes hostname = mail.roessner-net.de lda_mailbox_autosubscribe = yes mail_access_groups = vmail mail_attachment_dir = /var/mail/virtual/copymail/attachments mail_gid = vmail mail_location = mdbox:~/mdbox mail_plugins = quota acl fts fts_solr zlib mail_privileged_group = mail mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave mdbox_rotate_size = 128 M namespace { list = children location = mdbox:%%h/mdbox prefix = shared/%%u/ separator = / subscriptions = no type = shared } namespace inbox { inbox = yes location = mailbox "Deleted Messages" { special_use = \Trash } mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Junk-E-Mail { special_use = \Junk } mailbox Junk { special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { auto = subscribe special_use = \Trash } mailbox junkmail { auto = subscribe special_use = \Junk } prefix = separator = / type = private } passdb { args = /etc/dovecot/master-users driver = passwd-file master = yes pass = yes } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { acl = vfile acl_shared_dict = file:/var/mail/virtual/shared-mailboxes.db fts = solr fts_solr = break-imap-search url=http://localhost:8080/solr/ quota = dict:User quota::file:%h/mdbox/dovecot-quota quota_rule = *:storage=300M:messages=20000 quota_status_nouser = DUNNO quota_status_overquota = 552 5.2.2 Mailbox is full quota_status_success = DUNNO quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u sieve = ~/.dovecot.sieve sieve_dir = ~/sieve zlib_save = gz zlib_save_level = 6 } protocols = imap pop3 lmtp sieve service auth-worker { extra_groups = ssl-cert unix_listener auth-worker { mode = 0600 user = vmail } user = vmail } service auth { extra_groups = ssl-cert unix_listener auth-userdb { mode = 0600 user = vmail } user = vmail } service dict { unix_listener dict { mode = 0600 user = vmail } } service lmtp { unix_listener /var/spool/postfix/private/lmtp-dovecot { group = postfix mode = 0666 user = postfix } } service quota-status { client_limit = 1 executable = quota-status -p postfix inet_listener { port = 12340 } } service quota-warning { executable = script /usr/local/bin/quota-warning.sh unix_listener quota-warning { user = vmail } user = dovecot } ssl_ca = </etc/ssl/certs/SSL123_CA_Bundle.pem ssl_cert = </etc/ssl/certs/mail.roessner-net.de.pem ssl_key = </etc/ssl/private/mail.roessner-net.de.key.pem userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } verbose_proctitle = yes protocol lmtp { mail_plugins = quota acl fts fts_solr zlib sieve } protocol lda { mail_plugins = quota acl fts fts_solr zlib sieve } protocol imap { imap_client_workarounds = tb-extra-mailbox-sep tb-lsub-flags mail_max_userip_connections = 50 mail_plugins = quota acl fts fts_solr zlib imap_quota imap_acl imap_zlib } Thanks for helping me… Kind regards -Christian Rößner -- [*] sys4 AG http://sys4.de, +49 (89) 30 90 46 64 Franziskanerstraße 15, 81669 München Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263 Vorstand: Patrick Ben Koetter, Axel von der Ohe, Marc Schiffbauer Aufsichtsratsvorsitzender: Florian Kirstein

2 3

[Dovecot] Crossrealm Kerberos problems
by Jonathan Hanks 15 May '13

15 May '13

I am running dovecot 2.1.7 on Debian Squeeze 64 bit, config information at the end of the email. I am working on a Kerberos/GSSAPI based setup that requires cross-realm authentication. I have regular GSSAPI working, I can log in using pam_krb5 with password based logins or with the GSSAPI support when using a kerberos ticket in the default realm. However when I attempt to authenticate using cross realm authentication the login fails (logs below). After perusing the source code I beleive that the problem is as such: All taking place in mech-gssapi.c 1. mech_gssapi_userok(...) calls mech_gssapi_krb5_userok 2. mech_gssapi_krb5_userok(...) calls krb5_kuserok(...) to verify that the given Kerberos prinicpal can log in as the requested user. 3. The authentication process is running as the Dovecot user so: 3a. krb5_kuserok(...) looks for ~dovecot/.k5login to authorize cross realm logins 3b. There is no ~dovecot/.k5login, thus no cross realm access is allowed 3c. It should be looking at the users .k5login ~poptest/.k5login 3d. This never happens and the login attempt fails I have the server set up to use system users specifically so that I can do cross-realm authentication. Do I have some basic configuration error? How do I change the authentication process to run as the user requesting to login? Should that be allowed? Another thought is to backport some of the patches proposed for 2.2 that remove krb5_kuserok from the loop. Thank you for any insight. This server is not in production use so I can experiment. May 9 10:54:49 lakeview.ligo-wa.caltech.edu dovecot: auth: Debug: gssapi(jonathan.hanks(a)SOME.REALM,198.129.xxx.xxx,<qYAkv0zc9wDGgdAT>): Negotiated security layer May 9 10:54:49 lakeview.ligo-wa.caltech.edu dovecot: auth: Debug: gssapi(jonathan.hanks(a)SOME.REALM,198.129.xxx.xxx,<qYAkv0zc9wDGgdAT>): Negotiated security layer May 9 10:54:49 lakeview.ligo-wa.caltech.edu dovecot: auth: Debug: client out: CONT#0111#011BQQF/wAMAAAAAAAACpxNKQH///+YdY3lGMDBq6TWTfc= May 9 10:54:49 lakeview.ligo-wa.caltech.edu dovecot: auth: Debug: client out: CONT#0111#011BQQF/wAMAAAAAAAACpxNKQH///+YdY3lGMDBq6TWTfc= May 9 10:54:49 lakeview.ligo-wa.caltech.edu dovecot: auth: Debug: client in: CONT<hidden> May 9 10:54:49 lakeview.ligo-wa.caltech.edu dovecot: auth: Debug: client in: CONT<hidden> May 9 10:54:49 lakeview.ligo-wa.caltech.edu dovecot: auth: gssapi(jonathan.hanks(a)SOME.REALM,198.129.xxx.xxx,<qYAkv0zc9wDGgdAT>): User not authorized to log in as poptest May 9 10:54:49 lakeview.ligo-wa.caltech.edu dovecot: auth: gssapi(jonathan.hanks(a)SOME.REALM,198.129.xxx.xxx,<qYAkv0zc9wDGgdAT>): User not authorized to log in as poptest My config is as follows: # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.7 auth_debug = yes auth_gssapi_hostname = $ALL auth_krb5_keytab = /etc/mail.keytab auth_mechanisms = plain login gssapi auth_username_format = %u auth_verbose = yes listen = * mail_location = mbox:~/mail:INBOX=/var/spool/mail/inbox/%u mail_privileged_group = mail passdb { args = dovecot driver = pam } protocols = imap pop3 service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } unix_listener auth-userdb { mode = 0666 } } service imap-login { inet_listener imap { port = 0 } inet_listener imaps { port = 993 ssl = yes } } service pop3-login { inet_listener pop3 { port = 0 } inet_listener pop3s { port = 995 ssl = yes } } ssl_cert = </etc/ssl/certs/mail-server.pem ssl_cipher_list = !aNULL:!eNULL:!EXPORT:!DSS:!DES:RC4-SHA:RC4-MD5:ALL ssl_key = </etc/ssl/private/mail-server.pem userdb { driver = passwd } protocol imap { imap_client_workarounds = tb-extra-mailbox-sep tb-lsub-flags } protocol pop3 { pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xv } -- Jonathan Hanks General Computing Sys Admin LIGO Hanford Observatory

2 2

[Dovecot] Fatal: Can't finish POP3 UIDL command
by stevenfah 15 May '13

15 May '13

I have been setting up a new mail server and copied our client's old mail to it. The old server has Courier (under Plesk), we're using Dovecot on the new server. Most accounts seem to work fine (under IMAP or POP3), but for a few we're getting the following in the /var/log/mail.err. Error: Message ordering changed unexpectedly (msg #1: storage seq 140 -> 1) Fatal: Can't finish POP3 UIDL command And the affected accounts can't get at their email. Things work ok if people switch to IMAP but for some of our clients that is a difficulty, so we really need POP3 working. I used the Perl script given here to convert the mailboxes. The only fix we've found is the rename/delete the Dovecot-uidlist file for the affected mailboxes and we've done that, as it was only a few. The issue now is that more mailboxes are coming with the same error, even though they were fine originally. -- View this message in context: http://dovecot.2317879.n4.nabble.com/Fatal-Can-t-finish-POP3-UIDL-command-t… Sent from the Dovecot mailing list archive at Nabble.com.

2 3

[Dovecot] quota-related crash for doveadm dsync operation
by Emmanuel Dreyfus 15 May '13

15 May '13

Hi I understand the crash below is caused by filesystem quota. I just report it because perhaps it could have a more graceful failure. Apr 29 09:39:17 danceny dovecot: dsync-local(jdoe): Error: Mailbox Sent: Saving failed: Not enough disk space Apr 29 09:39:17 danceny syslogd[165]: last message repeated 4 times Apr 29 09:39:17 danceny dovecot: doveadm: Error: dsync-remote(jdoe): Error: Cached message size smaller than expected (35111 < 40830) Apr 29 09:39:17 danceny dovecot: doveadm: Error: dsync-remote(jdoe): Error: Corrupted index cache file /mail/indexes/jdoe/.imap/Sent/dovecot.index.cache: Broken physical size for mail UID 976 Apr 29 09:39:17 danceny dovecot: doveadm: Error: dsync-remote(jdoe): Error: dsync(local): read(/home/pct/jdoe/mail/Sent) failed: Invalid argument Apr 29 09:39:17 danceny dovecot: dsync-local(jdoe): Error: dsync(root(a)volanges.net.espci.fr): read() failed: Broken pipe Apr 29 09:39:17 danceny dovecot: dsync-local(jdoe): Panic: file mail-storage.c: line 1830 (mailbox_transaction_commit_get_changes): assertion failed: (ret < 0 || seq_range_count(&changes_r->saved_uids) == save_count || array_count(&changes_r->saved_uids) == 0) Apr 29 09:39:17 danceny dovecot: dsync-local(jdoe): Fatal: master: service(doveadm): child 23443 killed with signal 6 (core not dumped - set service doveadm { drop_priv_before_exec=yes }) -- Emmanuel Dreyfus manu(a)netbsd.org

2 1

[Dovecot] Lucene and Zlib with 2.2.1
by Kyle Wheeler 15 May '13

15 May '13

Hello, I have an "archive" folder in my inbox, where I manually stick old mails into a compressed mbox format. Since upgrading to Dovecot 2.2.1, I've started seeing messages like the following in my log files: imap(...): Error: lucene: Failed to sync mailbox INBOX: Mailbox isn't selectable indexer-worker(...): Error: lucene: Failed to sync mailbox INBOX: Mailbox isn't selectable indexer-worker(...): Error: lucene: Failed to sync mailbox INBOX: Mailbox isn't selectable indexer-worker(...): Error: lucene: Failed to sync mailbox INBOX: Mailbox isn't selectable imap(...): Error: indexer failed to index mailbox INBOX/Archive/2007/Sent.gz These errors *appear* to be mostly benign; I still get results from searching the mailbox. But for whatever reason, the indexer appears to not be working for those folders. As you can probably tell, I'm using the fts_lucene plugin, which used to work just fine (with Dovecot 2.1.x). Is this expected behavior? Are these errors truly ignorable? Why are these compressed mailboxes not selectable? ~Kyle -- Where justice is denied, where poverty is enforced, where ignorance prevails, and where any one class is made to feel that society is an organized conspiracy to oppress, rob and degrade them, neither persons nor property will be safe. -- Frederick Douglas

3 5

[Dovecot] Xlist in userdb, Foldernames with whitespace?
by Hajo Locke 15 May '13

15 May '13

Hello, i use dovecot 2.1.7 and exported all my XLIST FolderSettings to userdb Whole Story is here: http://dovecot.org/list/dovecot/2013-March/089209.html This is all successful, but there is one problem left. I use lines like this to realize individual XLIST Foldernames in usedb: namespace/inbox/mailbox=Sent namespace/inbox/mailbox/Sent/name=Sent namespace/inbox/mailbox/Sent/auto=subscribe namespace/inbox/mailbox/Sent/special_use=\sent My problem is to allow Foldernames with whitespace in it f.e. Sent Messages I tried to put these names in quotes in this line or mask the blank with backslash but nothing was working. Dovecot ist not accepting these settings: dovecot: imap: Debug: Added userdb setting: namespace/inbox/mailbox="Sent Messages" dovecot: imap: Debug: Unknown userdb setting: plugin/namespace/inbox/mailbox/"Sent Messages"/auto=subscribe dovecot: imap: Debug: Unknown userdb setting: plugin/namespace/inbox/mailbox/"Sent Messages"/name="Sent Messages" dovecot: imap: Debug: Unknown userdb setting: plugin/namespace/inbox/mailbox/"Sent Messages"/special_use=\sent How to code folders with whitespace etc. in my userdb settings? I tried a lot but nothing was correct. Thanks, Hajo

2 3

[Dovecot] protocols and privileges
by andreas graeper 15 May '13

15 May '13

hi, 1) protocols = pop3 but when starting the service, output tells about imap. when mua fetches mails ~/mail/.imap/INDEX is created. 2) i have some users uid=500 .. 505. src in /var/mail/%u, owner is <user>.mail and home-directories /home/<user> - owner is <user>.users when dovecot tries to create directory /home/<user>/mail then it tells for user xyz (uid = 502) euid=502(xyz) egid=100(users) missing +w permission /home/xyz , euid is not dir owner. but /home/xyz is owned by xyz.users and mod = 0700 ( drwx------ ) same environment for uid = 501 works great ! thanks in advance andreas ? permission lookup from /home/xyz/mail failed do i have to create that mail directory manually ?

2 1

[Dovecot] dovecot 2.2.1: lmtp running in base_dir
by Andy R 15 May '13

15 May '13

Evening all, I'm running into an issue with lmtp trying to store user mail in 'base_dir' ( same as this ( http://www.dovecot.org/list/dovecot/2011-January/056736.html )) however I'm just using PAM for auth. I've tried with chroot, without chroot and 'chroot'ing lmtp directly in ' service lmtp { } ' which just lead to lots more errors. I've not included anything of the current config so far, as I don't know what is needed here yet. I'm sure I'm missing something obvious, but I can't spot it for the life of me. Can anyone offer any new ideas? Many thanks Andy R.

2 1

[Dovecot] Dovecot 2.2.1 subscribtion status in LIST
by Nikolay S. 15 May '13

15 May '13

Hi there, I am using Evolution to connect to dovecot imap server. Today the server was upgraded to 2.2.1 from 2.1.9, and there is problem with evolution being unable to subscribe to INBOX. This is from dovecot 2.1.9: a002 list "" "*" return (subscribed) * LIST (\Subscribed) "." "Sent Items" * LIST (\Subscribed) "." "Junk E-mail" * LIST (\Subscribed) "." "Trash" * LIST (\Subscribed) "." "Archive" * LIST (\Subscribed) "." "Drafts" * LIST (\Subscribed) "." "INBOX" <--- And this is from 2.2.1: a002 list "" "*" return (subscribed) * LIST (\Subscribed) "." "Sent Items" * LIST (\Subscribed) "." "Junk E-mail" * LIST (\Subscribed) "." Trash * LIST (\Subscribed) "." Archive * LIST (\Subscribed) "." Drafts * LIST () "." INBOX <--- a002 OK List completed. a002 lsub "" "*" * LSUB () "." Drafts * LSUB () "." "Sent Items" * LSUB () "." Archive * LSUB () "." Trash * LSUB () "." INBOX <--- * LSUB () "." "Junk E-mail" a002 OK Lsub completed. In 2.2.1 LIST does not show INBOX as subscribed, which looks to confuse evolution. INBOX is actually subscribed: cat <path-to-maildir>/subscriptions Drafts Sent Items Archive Trash INBOX Junk E-mail

2 1

[Dovecot] IMAP SSL proxy (questions)
by Trever L. Adams 15 May '13

15 May '13

Hello everyone, I have seen: http://wiki.dovecot.org/HowTo/ImapProxy. It doesn't seem to fit what I need. Unfortunately, I cannot use TLS. I have to use SSL. Also, I would rather not duplicate the certificates for the IMAP servers. Hence nginx doesn't seem to be a good choice either. I am hoping that since SSL has "Client Hello" which specifies the site requested the the following could be done: Client - > Proxy [SYN] Proxy -> Client [SYN, ACK] Client -> Proxy [ACK] Client -> Proxy [SSL With "Client Hello", having server_name in Extension: server_name and sub-fields] Proxy sees intended host Proxy <-> Intended Server [SYN/SYN+ACK/ACK sequence] Proxy -> Intended Server [Replay SSL/Client Hello] Client <-> Proxy <-> Intended Server (Proxy is non decrypting Man-in-the-Middle, just acting as a pseudo-invisible relay) I know that something somewhat like this works because this is how Apache can do virtual hosts with SSL. Of course, it acts as the end point intended server, not a proxy. I believe it is also somewhat how Squid does SSL proxying, although I could be entirely wrong. Is this possible? Can this be implemented in dovecot? If not, does anyone know of such a project. Proxy needs to not have any exploitable holes and really only needs to understand enough SSL to get the server_name, pass through the connection, replaying Client Hello, and then knowing when to shut the connection. Just as a breif example, the use I have for this now is that I have several imap servers which all have IPv6 addresses, but have to share an IPv4 address. for SMTP side of things, this works well for all incoming email. (As an aside, does anyone know of a similar setup for SSL traffic on port 465 SSL for SMTP?) Thank you for any help, Trever

5 5

[Dovecot] Keyword limit?
by Michael M Slusarz 15 May '13

15 May '13

Running into a weird issue in a mailbox that has 26+ keywords. In one session, I do this: S: 2 SELECT "INBOX" (QRESYNC (1255685337 78608 [...uids...])) S: [...] S: * OK [HIGHESTMODSEQ 78608] Highest S: * OK [UIDVALIDITY 1255685337] UIDs valid S: 2 OK [READ-WRITE] Select completed. C: 3 UID STORE 48386 (UNCHANGEDSINCE 78608) +FLAGS AAAAAAAA S: * 8 FETCH (UID 48386 MODSEQ (78609) FLAGS (\Seen AAAAAAAA)) S: 3 OK Store completed. C: 4 LOGOUT S: * OK [CLOSED] Previous mailbox closed. S: * BYE LOGOUT received S: 4 OK Completed The next time I access that mailbox, I see this: C: 2 SELECT "INBOX" (QRESYNC (1255685337 78609 [...uids...])) S: [...] S: * OK [UIDVALIDITY 1255685337] UIDs valid S: * OK [HIGHESTMODSEQ 78609] Highest S: * 8 FETCH (MODSEQ (78610) UID 48386 FLAGS (\Seen)) S: 2 OK [READ-WRITE] Select completed. MODSEQ 78610 is entirely server-initiated. It *appears* that the mailbox doesn't handle more than 26 keywords. My dovecot-keywords looks like: 0 $Forwarded [Entries 1-24] 25 Test "Test" is a keyword I created immediately before "AAAAAAAA". If I remove Test and then add "AAAAAAAA", the keyword sticks. Is this a built-in limit? Can't find anything in the config/wiki docs (Dovecot 2.1.16). Or are my dovecot index/cache files hosed in some way? michael

3 4

[Dovecot] Mail deduplication
by Tim Groeneveld 15 May '13

15 May '13

Hi Guys, I am wondering about mail deduplication. I am looking into the possibility of seperating out all of the message bodies with multiple parts inside mail that is recived from `dovecot` and hashing them all. The idea is that by hashing all of the parts inside the email, I will be able to ensure that each part of the email will only be saved once. This means that attachments & common parts of the body will only be saved once inside the storage. How achievable would this be with the current state of dovecot? Would it even be worth doing? Thanks, Tim

7 19

[Dovecot] quota and dict
by Jeff Gustafson 15 May '13

15 May '13

I have a question about using dict and quotas. I want dovecot to send quota queries to a custom dict server over a socket. I'm doing this because I can't do group quotas based on domain since a customer can have each of their users associated with different domains under a single account. I need to lookup the account ID and group based on that. I'm worried putting everything in mysql will cause way too many writes and lower the performance of our mysql cluster. I have having a little trouble connecting all the dots in the config file. In the userdb example, there is an 'args' parameter that allows a file to specify a uri. I don't see how to do that for dict. I only see file, mysql, and postgresql. Shouldn't I be able to use a dictionary proxy to attach any custom program to a quota dict socket? Tell the quota plug to proxy quota which then points to a socket: plugin { quota = dict:User quota::proxy::quota } dict { quota = proxy:/tmp/test-socket } or should it be: plugin { quota = dict:User quota::proxy:/tmp/test-socket } Neither one create a socket in /tmp. It seems like this should be possible, but I don't see an obvious way to do it. ...Jeff

2 1

[Dovecot] Released Pigeonhole v0.4.0 for Dovecot v2.2.1.
by Stephan Bosch 15 May '13

15 May '13

Hello Dovecot users, I finally release the first version of Pigeonhole v0.4 for Dovecot v2.2. The main reason for the delay was that some unexpected (design) problems occurred with the new doveadm-sieve plugin, which allows synchronizing sieve scripts using doveadm sync. One important change is that I incorporated the extprograms plugin into the main Pigeonhole release. With this plugin it is possible to execute administrator-controlled external programs (shell scripts) from the Sieve interpreter, e.g. for special message delivery, filtering and string manipulation. The list of new features is not that impressive. I've been working on IMAP URLAUTH, IMAP CATENATE and HTTP support for Dovecot. Currently, I'm building an SMTP submission proxy server. After all that I plan to spend more time on Sieve development. One of the most important issues on my list is implementing support for using alternative types of storage (e.g. a database) for Sieve scripts, rather than only a filesystem directory as it is now. Changelog v0.4.0: + Added doveadm-sieve plugin that provides the possibility to sync Sieve scripts using doveadm sync along with the user's mailboxes. + Added the Sieve extprograms plugin to the main Pigeonhole package. It is still a plugin, but it is now included so that a separate compile is no longer necessary and distributors are likely to include it. The extprograms plugin provides Sieve language extensions that allows executing (administrator-controlled) external programs for message delivery, message filtering and string manipulation. Refer to doc/plugins/sieve_extprograms.txt for more information. + Added debug message showing Pigeonhole version at initialization. Makes it very clear that the plugin is properly loaded. + Finished implementation of the Sieve include extension. It should now fully conform to RFC 6609. The main addition is the new :optional tag which makes the include command ignore missing included scripts without an error. + Finished implementation of the Sieve environment extension as much as possible. Environment items "location", "phase" and "domain" now also return a usable value. The release is available as follows: http://www.rename-it.nl/dovecot/2.2/dovecot-2.2-pigeonhole-0.4.0.tar.gz http://www.rename-it.nl/dovecot/2.2/dovecot-2.2-pigeonhole-0.4.0.tar.gz.sig Refer to http://pigeonhole.dovecot.org and the Dovecot v2.x wiki for more information. Have fun testing this new release and don't hesitate to notify me when there are any problems. Regards, -- Stephan Bosch stephan(a)rename-it.nl

10 27

[Dovecot] 2.2.x autobuilds: Debian Stable now Wheezy, which pool for 2.2.x?
by Ron Leach 15 May '13

15 May '13

List, good evening, just installed a new Debian Stable (Wheezy). The Debian Stable repositories now include Dovecot 2.1.7 as standard. I haven't installed that because I wanted to try 2.2.x on this new clean install but unsure which 'pool' to use in the xi.rename-it.nl repository of autobuilds. http://xi.rename-it.nl/debian/pool/ Wheezy became Stable on May 5, just a few days ago. I'm not sure whether to still follow the advice in the wiki for obtaining 2.2.x for Wheezy, which (understandably, because the new Debian Stable release has been so very recent) continues to refer to Wheezy as 'testing'. http://wiki2.dovecot.org/PrebuiltBinaries#Automatically_Built_Packages Presumably, the packages in the 'testing' autobuild system pick up Debian's 'testing' pool libraries (or assume them to exist) and these may no longer be the ones needed for Wheezy because Wheezy is 'Stable', in Debian-speak. Does anyone know, for sure, which autobuild pool to now use for 2.2.x for Wheezy? http://xi.rename-it.nl/debian/pool/stable-auto/ or http://xi.rename-it.nl/debian/pool/testing-auto/ 2.2.x in 'stable-auto' doesn't seem to have changed since before Wheezy was released, whereas 2.2.x has changed in 'testing-auto', and I'm not sure what to make of that. Stephan does suggest that queries be directly written to him, but I posted here because I thought I might not be the only person who was unsure. I'd be grateful for any advice, regards, Ron

3 5

[Dovecot] Idea: POP3 deletion as a flag
by Timo Sirainen 14 May '13

14 May '13

GMail doesn't delete mails when POP3 client issues a DELE command for it. Instead they just become invisible for future POP3 sessions, but they still exist for IMAP/webmail. The same could be implemented pretty easily for Dovecot: - Add a new setting to enable this: pop3_deleted_flag = $POP3Deleted - When DELEting a message, add this flag to the message. - When listing messages, skip all messages that have this flag. - Also hide this flag from IMAP clients(?) Thoughts? Probably 20 lines of new code.

18 44

[Dovecot] ot: mirroring/archiving to a Mac?
by voytek＠sbt.net.au 14 May '13

14 May '13

I have Doveot 2.1.1 on Centos, all's well user mails are kept for 60 days, then, 'aged off' (deleted) a Mac user with two domains and two dozen users asked me: can I set a mail server on my home Mac server, and, 'mirror' the real mail server mailboxes so than I can have an offline mail archive for ever ? I know very little about Macs, can I setup dovceot on Mac? any tips/suggestions/howtos for mirroring/archiving as so?

5 6

[Dovecot] Pigeonhole: Typo in 20-managesieve.conf
by Gedalya 12 May '13

12 May '13

Line 33: #process_count = 1024 Probably you mean process_limit

2 1

[Dovecot] Any way to let dovecot block pop3 attempts?
by Steve Campbell 12 May '13

12 May '13

Is there a way using dovecot facilities to block an IP from attempting POP3 connections (similar to the sendmail access file for smtp connections)? I usually do this at my border firewall, but if there's a quick and dirty way in dovecot to do this, it'd make life a little simpler. Thanks steve campbell

7 10

[Dovecot] Problem with LDA reject message
by Davide 11 May '13

11 May '13

Hi to all, i have a problem with LDA when users are quota-full. My setup is Vpopmail + dovecot + lda; if i send a messagge internally to a user with quota full i receive correctly a messagge but in the header ( i attacch a snip) From - Fri May 10 14:42:27 2013 X-Mozilla-Status: 0001 X-Mozilla-Status2: 00000000 X-Mozilla-Keys: Return-Path: <"<>"@mail.cgilfe.it> i receive this strange Return-Path. I the messagge is sent outside other servers reply with this messagge: Subject: failure notice Hi. This is the qmail-send program at mail.cgilfe.it. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. <Roberta.Luzzi(a)filcams.cgil.it>: Connected to 80.207.169.234 but sender was rejected. Remote host said: 501 Address Syntax Error in <"<>"@mail.cgilfe.it> this is my .qmail-default file: |/var/qmail/bin/preline -f /usr/local/libexec/dovecot/dovecot-lda -d $EXT@$USER | /home/vpopmail/bin/vdelivermail "" bounce-no-mailbox Thanks in advance. -- *Davide Marchi* *T*eorema *F*errara *Srl* Via Spronello, 7 - Ferrara - 44121 Tel. *0532783161* Fax. *0532783368* E-m@il: *davide.marchi(a)mail.cgilfe.it* Skype: *davide.marchi73* Web: *http://www.cgilfe.it* *CONFIDENZIALITA'* *Ai sensi del D.Lgs. 196/2003 si precisa che le informazioni contenute in questo messaggio sono riservate ed a uso esclusivo del destinatario/dei destinatari. Qualora il messaggio in parola Le fosse pervenuto per errore, La invitiamo ad eliminarlo senza copiarlo e a non inoltrarlo a terzi, dandocene gentilmente comunicazione.* *Per favore, pensa all'ambiente. Stampa questa email solo se necessario.*

2 1

Re: [Dovecot] Any way to let dovecot block pop3 attempts?
by Joseph Tam 11 May '13

11 May '13

Steve Campbell writes: > I use Centos and the default dovecot RPM. I seem to recall there was a > way to determine if dovecot was built with "--with-libwrap". Can anyone > shed light on how to determine this, please? Maybe dovecot --build-options Or you can just test it directly by denying a connection to a test host. Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] Remove Return-Path in lda rejection message
by Davide 11 May '13

11 May '13

Is it possible to remove return-path in dovecot lda rejection? -- *Davide Marchi* *T*eorema *F*errara *Srl* Via Spronello, 7 - Ferrara - 44121 Tel. *0532783161* Fax. *0532783368* E-m@il: *davide.marchi(a)mail.cgilfe.it* Skype: *davide.marchi73* Web: *http://www.cgilfe.it* *CONFIDENZIALITA'* *Ai sensi del D.Lgs. 196/2003 si precisa che le informazioni contenute in questo messaggio sono riservate ed a uso esclusivo del destinatario/dei destinatari. Qualora il messaggio in parola Le fosse pervenuto per errore, La invitiamo ad eliminarlo senza copiarlo e a non inoltrarlo a terzi, dandocene gentilmente comunicazione.* *Per favore, pensa all'ambiente. Stampa questa email solo se necessario.*

2 1

[Dovecot] Expunge mailbox from script
by Paul van der Vlis 10 May '13

10 May '13

Hello, I would like to expunge all mail of a mailbox from a script. What's a good tool to do that? With regards, Paul van der Vlis. -- Paul van der Vlis Linux systeembeheer, Groningen http://www.vandervlis.nl/

2 1

Re: [Dovecot] change inbox dotlock name
by Chris Saldanha 10 May '13

10 May '13

Axel Luttgens <AxelLuttgens(a)swing.be> wrote: > But I fear I don't understand your problem description. > Could you elaborate? Hi Axel, The issue is that the procmail port on FreeBSD doesn't acquire a dotlock when it's the default lock file (/var/mail/username.lock). It prints that it's bypassing the dotlock and just does a lockf() lock after. Looking in the code for procmail, it seems that it's being too clever with a bunch of checks and so it doesn't try to get the lock -- it's decided it doesn't want to before doing it. The permissions and runtime environment permit the lock, and the same lock is acquired correctly by dovecot when writing to the inbox. I'm doing dotlock and then lockf() locking in all the mail software. procmail's checks only seem to apply to the default lock file for the inbox. If I specify an alternate name in the .procmailrc for the $ORGMAIL delivery of the message, then it will acquire any other lock I ask, including an alternate name in the /var/mail directory. I'll dig into the procmail sources as needed to resolve it, but I had hoped that I could get dovecot to lock with a different filename, because that would resolve the issue with minimal hackery... Cheers, Chris -- Chris Saldanha Parliant Corporation

2 1

[Dovecot] dovecot not logging after upgrade to 2.1.7 on debian
by Steinar Bang 09 May '13

09 May '13

After upgrading my IMAP server to the new debian stable, and upgrading dovecot from 1.x to 2.1.7 in the process, dovecot no longer logs anything to /var/log/mail.*. The last entries there are from before the upgrade, and no starts or error messages or failed login attempts, since then, have been logged. Does anyone know what might cause this? "doveconf -n" doesn't mention any of the log settings. Maybe the log settings aren't picked up? What could be done to make sure they are picked up? Here's the content of the /etc/dovecot/conf.d/10-logging.conf file: ## ## Log destination. ## # Log file to use for error messages. "syslog" logs to syslog, # /dev/stderr logs to stderr. log_path = syslog # Log file to use for informational messages. Defaults to log_path. #info_log_path = # Log file to use for debug messages. Defaults to info_log_path. #debug_log_path = # Syslog facility to use if you're logging to syslog. Usually if you don't # want to use "mail", you'll use local0..local7. Also other standard # facilities are supported. syslog_facility = mail ## ## Logging verbosity and debugging. ## # Log unsuccessful authentication attempts and the reasons why they failed. #auth_verbose = no # In case of password mismatches, log the attempted password. Valid values are # no, plain and sha1. sha1 can be useful for detecting brute force password # attempts vs. user simply trying the same password over and over again. #auth_verbose_passwords = no # Even more verbose logging for debugging purposes. Shows for example SQL # queries. #auth_debug = no # In case of password mismatches, log the passwords and used scheme so the # problem can be debugged. Enabling this also enables auth_debug. #auth_debug_passwords = no # Enable mail process debugging. This can help you figure out why Dovecot # isn't finding your mails. #mail_debug = no # Show protocol level SSL errors. #verbose_ssl = no # mail_log plugin provides more event logging for mail processes. plugin { # Events to log. Also available: flag_change append #mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename # Available fields: uid, box, msgid, from, subject, size, vsize, flags # size and vsize are available only for expunge and copy events. #mail_log_fields = uid box msgid size } ## ## Log formatting. ## # Prefix for each line written to log file. % codes are in strftime(3) # format. #log_timestamp = "%b %d %H:%M:%S " # Space-separated list of elements we want to log. The elements which have # a non-empty variable value are joined together to form a comma-separated # string. #login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c # Login log format. %$ contains login_log_format_elements string, %s contains # the data we want to log. #login_log_format = %$: %s # Log prefix for mail processes. See doc/wiki/Variables.txt for list of # possible variables you can use. #mail_log_prefix = "%s(%u): " # Format to use for logging mail deliveries. You can use variables: # %$ - Delivery status message (e.g. "saved to INBOX") # %m - Message-ID # %s - Subject # %f - From address # %p - Physical size # %w - Virtual size #deliver_log_format = msgid=%m: %$

4 6

[Dovecot] Released Pigeonhole v0.3.5 for Dovecot v2.1.16
by Stephan Bosch 09 May '13

09 May '13

Hello Dovecot users, Before I release the first version of Pigeonhole v0.4, I quickly release a few small but important fixes for Pigeonhole v0.3. Changelog v0.3.5: - Sieve editheader extension: fixed interaction with the Sieve body extension. If used together, the deleteheader action could fail after a body test was performed. - Test suite: fixed a time zone dependency in the Sieve date extension tests. The release is available as follows: http://www.rename-it.nl/dovecot/2.1/dovecot-2.1-pigeonhole-0.3.5.tar.gz http://www.rename-it.nl/dovecot/2.1/dovecot-2.1-pigeonhole-0.3.5.tar.gz.sig Refer to http://pigeonhole.dovecot.org and the Dovecot v2.x wiki for more information. Have fun testing this new release and don't hesitate to notify me when there are any problems. Regards, -- Stephan Bosch stephan(a)rename-it.nl

1 0

[Dovecot] Permission problem with LDA and dovecot 2.2.1
by Tobi 09 May '13

09 May '13

Hello list today I built dovecot 2.2.1 from sources. But I have permission problems with LDA The "normal" imap part works fine, users can login and see their boxes. deliver is called as LDA from postfix master.cf as follows << dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/local/libexec/dovecot/deliver -f ${sender} -d ${user}@${nexthop} >> but when I try to send a testmail then I get the following in the logs << 2013 May 6 18:37:59 nordkap lda: Fatal: Internal error occurred. Refer to server log for more information. May 6 18:37:59 nordkap dovecot: lda: Error: userdb lookup: connect(/var/run/dovecot/auth-userdb) failed: Connection refused May 6 18:37:59 nordkap dovecot: lda: Fatal: Internal error occurred. Refer to server log for more information. >> For me it looks odd because the auth-userdb is defined as << base_dir = /usr/local/var/run/dovecot/ service auth { unix_listener auth-userdb { mode = 0777 user = vmail group = vmail } .... >> The rights on the file should be correct according to the config above << ls -al /usr/local/var/run/dovecot/auth-userdb srwxrwxrwx 1 vmail vmail 0 May 6 20:11 /usr/local/var/run/dovecot/auth-userdb >> I cannot explain why the lda tries to access << Error: userdb lookup: connect(/var/run/dovecot/auth-userdb) >> I grepped through all the configfiles but could not find the "wrong" path from the error message above. Would it might be a "fix" to symlink /usr/local/var/run/dovecot to /var/run/dovecot ? Or would that break something with dovecot? Thanks for any hint or idea tobi

5 12

[Dovecot] SSL problems on dovecot 2.1.7
by Steinar Bang 09 May '13

09 May '13

When I upgraded my debian-based imap server from squeeze to wheezy yesterday, SSL stopped working. I am using a http://cacert.org signed server sertificate, and I am reusing the certificates that were used on the 1.x dovecot of debian squeeze. My three MUAs that worked against the previous 1.x dovecot with the same certificate, now fails in various ways. Any hints and guesses as to how to debug this further will be highly appreciated. Even more appreciated will be a pin point of the issue. :-) Here are the error messages from the MUAs: - Opera 12.15 on Windows 7 just reports: "The connection with the IMAP server was unexpectedly interrupted." - Emacs24(w/linked-in gnutls)/Ma Gnus 0.8 (Gnus git HEAD) on Windows 7 says "imap.mydomain.com certificate could not be verified." - Emacs23/Ma Gnus 0.8 (also Gnus git HEAD) on debian testing (with Emacs23 gnutls-cli is run in a subprocess), says: "Opening connection to imap.mydomain.com via tls... Opening TLS connection to `imap.mydomain.com'... Opening TLS connection with `gnutls-cli --insecure -p 993 imap.mydomain.com'...done Opening TLS connection to `imap.mydomain.com'...done Unable to open server nnimap+privat due to: Process *nnimap* not running" When I try running gnutls-cli from the command line of the debian testing machine (the same gnutls-cli that is used by the emacs23/gnus combo), it seems to connect ok (the transcript of that session is below). The config for the SSL, from /etc/dovecot/conf.d/10-ssl.conf, is: # SSL/TLS support: yes, no, required. <doc/wiki/SSL.txt> ssl = yes # PEM encoded X.509 SSL/TLS certificate and private key. They're opened before # dropping root privileges, so keep the key file unreadable by anyone but # root. Included doc/mkcert.sh can be used to easily generate self-signed # certificate, just make sure to update the domains in dovecot-openssl.cnf ssl_cert = </etc/ssl/certs/imap_mydomain_com.pem ssl_key = </etc/ssl/private/imap_mydomain_com.key The access privileges of the files, are: -rw-r--r-- 1 root root 2077 Mar 27 12:45 /etc/ssl/certs/imap_mydomain_com.pem -rw------- 1 root root 3243 Jul 12 2011 /etc/ssl/private/imap_mydomain_com.key What follows, is the transcript from the gnutls-cli session from a debian testing machine to the server (which seems to be working as far as I can tell...): sb@edwards:~$ gnutls-cli -p 993 rainey.mydomain.com WARNING: gnome-keyring:: couldn't connect to: /home/sb/.cache/keyring-yeEdM3/pkcs11: No such file or directory Resolving 'rainey.mydomain.com'... Connecting to '212.110.185.190:993'... - Ephemeral Diffie-Hellman parameters - Using prime: 1024 bits - Secret key: 1023 bits - Peer's public key: 1023 bits - Certificate type: X.509 - Got a certificate list of 1 certificates. - Certificate[0] info: - subject `CN=imap.mydomain.com', issuer `O=Root CA,OU=http://www.cacert.org,CN=CA Cert Signing Authority,EMAIL=support(a)cacert.org', RSA key 4096 bits, signed using RSA-SHA1, activated `2013-03-27 12:43:30 UTC', expires `2013-09-23 12:43:30 UTC', SHA-1 fingerprint `86f8a501bca1e2b0eadc677bf05b103d298ce247' - The hostname in the certificate does NOT match 'rainey.mydomain.com' sb@edwards:~$ gnutls-cli -p 993 imap.mydomain.com WARNING: gnome-keyring:: couldn't connect to: /home/sb/.cache/keyring-yeEdM3/pkcs11: No such file or directory Resolving 'imap.mydomain.com'... Connecting to '212.110.185.190:993'... - Ephemeral Diffie-Hellman parameters - Using prime: 1024 bits - Secret key: 1022 bits - Peer's public key: 1021 bits - Certificate type: X.509 - Got a certificate list of 1 certificates. - Certificate[0] info: - subject `CN=imap.mydomain.com', issuer `O=Root CA,OU=http://www.cacert.org,CN=CA Cert Signing Authority,EMAIL=support(a)cacert.org', RSA key 4096 bits, signed using RSA-SHA1, activated `2013-03-27 12:43:30 UTC', expires `2013-09-23 12:43:30 UTC', SHA-1 fingerprint `86f8a501bca1e2b0eadc677bf05b103d298ce247' - The hostname in the certificate matches 'imap.mydomain.com'. - Peer's certificate issuer is unknown - Peer's certificate is NOT trusted - Version: TLS1.2 - Key Exchange: DHE-RSA - Cipher: AES-128-CBC - MAC: SHA1 - Compression: NULL - Handshake was completed - Simple Client Mode: * OK Waiting for authentication process to respond.. - Peer has closed the GnuTLS connection

1 0

[Dovecot] dovecot stats
by Jan-Frode Myklebust 09 May '13

09 May '13

I just upgraded one of our servers to dovecot v2.1.16 (ee), and am looking into the stats feature. Am I interpreting the wiki correct in reading that the "doveadm stats dump command" only returns statistics about IMAP commands? Is it possible to collect info about POP3 and LMTP commands also ? Also, is "doveadm stats dump command" telling me the results of all commands that has finished the last stats_command_min_time, or will it maybe contain much more than 1 minute of activity ? -jf

3 5

[Dovecot] AuthenticationFailedException: [IN-USE] Couldn't open INBOX: Permission denied
by Earles, Jill 09 May '13

09 May '13

I've been pouring over the documentation for dovecot, but can't find a solution to this problem. I recently took over administration of the dovecot email service at the University where I work, and things were going smoothly. We've been creating email accounts for use with JIRA, a bug reporting/tracking system, and one day recently, when I tried to add a new account to JIRA, I got this error returned from dovecot: "AuthenticationFailedException: [IN-USE] Couldn't open INBOX: Permission denied" I got help from Atlassian, the creators of JIRA, and they sent me links to some forum posts that said that changing the permissions of that user's /var/mail/ directory to 0600 would solve the problem. I changed that and no longer got the error. Being satisfied that this was a solution, I created a bunch of new email accounts today to replace exchange accounts, and then changed the permissions on all the /var/mail/ directories to 0600. Now I'm getting that error again, even for pre-existing email addresses, including the one that I had previously fixed by changing the permissions the same way. I tried changing some of the older accounts back to 0660, which is what they had before, and I still get the error even after restarting dovecot. JIRA uses POP, port 110, to connect to the dovecot mail server. I've also had the same problem trying to connect from Mac Mail. Our JIRA application is used for tracking issues for the UBC Libraries, and those email addresses are critical for the creation of tickets and adding comments to tickets. I am at a loss for what to do. Can anyone help? Thank you very much for your time. # dovecot -n # 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-131.0.15.el6.x86_64 x86_64 Red Hat Enterprise Linux Server release 6.4 (Santiago) auth_debug = yes auth_debug_passwords = yes disable_plaintext_auth = no mail_access_groups = mail mail_location = mbox:~/mail:INBOX=/var/spool/mail/%u mail_privileged_group = mail mbox_write_locks = fcntl passdb { driver = pam } ssl_cert = </etc/pki/dovecot/certs/server.crt ssl_key = </etc/pki/dovecot/private/server.key userdb { driver = passwd } protocol pop3 { pop3_uidl_format = %08Xu%08Xv } Here's an except of the maillog from a recent attempt: May 8 17:46:49 moose dovecot: auth: Debug: pam(lib.sysadmin,{ip removed}): lookup service=dovecot May 8 17:46:49 moose dovecot: auth: Debug: pam(lib.sysadmin,{ip removed}): #1/1 style=1 msg=Password: May 8 17:46:49 moose dovecot: auth: Debug: client out: OK#0111#011user=lib.sysadmin May 8 17:46:49 moose dovecot: auth: Debug: master in: REQUEST#0111028653057#01128298#0111#011a60ed90501af39d7e353a14e027255cd May 8 17:46:49 moose dovecot: auth: Debug: passwd(lib.sysadmin,{ip removed}): lookup May 8 17:46:49 moose dovecot: auth: Debug: master out: USER#0111028653057#011lib.sysadmin#011system_groups_user=lib.sysadmin#011uid=523#011gid=524#011home=/home/lib.sysadmin May 8 17:46:49 moose dovecot: pop3-login: Login: user=<lib.sysadmin>, method=PLAIN, rip={ip removed}, lip={ip removed}, mpid=28302 May 8 17:46:49 moose dovecot: pop3(lib.sysadmin): Error: stat(/var/spool/mail/lib.sysadmin) failed: Permission denied May 8 17:46:49 moose dovecot: pop3(lib.sysadmin): Error: stat(/var/spool/mail/lib.sysadmin) failed: Permission denied May 8 17:46:49 moose dovecot: pop3(lib.sysadmin): Error: Couldn't open INBOX: Permission denied May 8 17:46:49 moose dovecot: pop3(lib.sysadmin): Couldn't open INBOX top=0/0, retr=0/0, del=0/0, size=0 May 8 17:46:50 moose dovecot: auth: Debug: auth client connected (pid=28303) May 8 17:46:50 moose dovecot: auth: Debug: client in: AUTH#0111#011PLAIN#011service=pop3#011lip={ip removed}#011rip={ip removed}#011lport=110#011rport=64420#011resp=AGJ2YXV3LnJlbGFpcwByM2xAaXMuYnZAdXc=

2 8

[Dovecot] change inbox dotlock name
by Chris Saldanha 08 May '13

08 May '13

Hi, Is there a configuration element that would allow me to change the dot-lock name for the user's /var/mail inbox when it is locked? dovecot (correctly) acquires <username>.lock, but I'm having a problem with procmail where some obscure code path is preventing procmail's acquisition of a lock when it's that default name in /var/mail. The issue is not permissions (using a world-writeable and sticky-bit config for /var/mail). I'll dig into the procmail code if needed, but if dovecot could use a different filename for such locks, then that would solve my issue. procmail has such an option, and I only need to do this for inboxes. Thanks, Chris -- Chris Saldanha Parliant Corporation

2 1

[Dovecot] sieve redirect envelope address problem
by Костырев Александр Алексеевич 08 May '13

08 May '13

Good day! I have a problem with mail redirection through sieve rules. I've configured sieve rule that redirects any mail coming to user to gmail mailbox (or whatever external mail system there is). But when sieve redirects any mail it puts vmail@%dovecot_hostname% into envelope address, gives it to my exim for delivery and gmail rejects my mail because user vmail@%dovecot_hostname% do not exist. Please, advice for what can be done about this behavior. my `doveconf -n` http://pastebin.com/0dyL9Jgs Thanks in advance! -- С уважением, Костырев Александр администратор Linux-систем

4 4

[Dovecot] CATENATE mis-reads literal after bad URL
by Mike Abbott 08 May '13

08 May '13

Dovecot-2.2.1 plus Timo's recent CATENATE and URLAUTH fixes mishandles literals after bad URLs. (As before remember that the "foobar" text below is really "foobarCRLF" hence the length of 8. Also, last time some MTA discarded an important single leading space character in the snippet I quoted so this time I'm prefixing all the lines to avoid that. In case it's lost again, there's a space before the word "url" below.) | b append inbox catenate (text {8} | + OK | foobar | url /a-bad-url text {8} | b NO [BADURL /a-bad-url] Invalid messagepart IMAP URL. | c noop | d noop | d OK NOOP completed. | e logout | * BYE Logging out | e OK Logout completed. Note that the command with tag "c" is lost. I think it shouldn't be, because the NO was reported to the client without sending a continuation (+ OK) so the client knows not to send the literal. Plus it appears only one line is discarded regardless of the size of the literal.

2 2

[Dovecot] URLAUTH assertion failures in 2.2.1
by Mike Abbott 07 May '13

07 May '13

Testing URLAUTH in dovecot-2.2.1 plus Timo's recent CATENATE and URLAUTH fixes eventually trips some assertions. No simple sequence of commands always hits these; they appear to be timing-dependent. The first one is: May 02 17:47:17 imap(pid 50490 user submit): Panic: file imap-client.c: line 643 (client_command_free): assertion failed: (client->output_cmd_lock == NULL) The line number doesn't match dovecot-2.2.1 due to Apple's unrelated modifications. 0 libsystem_kernel.dylib 0x00007fff8a9f7d4a __pthread_kill + 10 1 libsystem_pthread.dylib 0x00007fff8f728705 pthread_kill + 92 2 libsystem_c.dylib 0x00007fff8f48b17b abort + 125 3 libdovecot.0.dylib 0x000000010db8d2bb default_fatal_finish + 68 4 libdovecot.0.dylib 0x000000010db8df66 i_internal_error_handler + 0 5 libdovecot.0.dylib 0x000000010db8d53d i_panic + 158 6 imap 0x000000010da468fe client_command_free + 446 7 imap 0x000000010da47a33 client_output_cmd + 37 8 imap 0x000000010da46497 client_output + 143 9 libdovecot.0.dylib 0x000000010dba5610 stream_send_io + 53 10 libdovecot.0.dylib 0x000000010db9bc74 io_loop_call_io + 46 11 libdovecot.0.dylib 0x000000010db9cc85 io_loop_handler_run + 214 12 libdovecot.0.dylib 0x000000010db9be1f io_loop_run + 77 13 libdovecot.0.dylib 0x000000010db5b0c6 master_service_run + 24 14 imap 0x000000010da4fa66 main + 1010 15 libdyld.dylib 0x00007fff8f7887bd start + 1 The second one is: May 02 19:23:29 imap(pid 60229 user mja): Panic: file index-mail.c: line 1274 (index_mail_close_streams_full): assertion failed: (!mail->data.destroying_stream) 0 libsystem_kernel.dylib 0x00007fff8a9f7d4a __pthread_kill + 10 1 libsystem_pthread.dylib 0x00007fff8f728705 pthread_kill + 92 2 libsystem_c.dylib 0x00007fff8f48b17b abort + 125 3 libdovecot.0.dylib 0x00000001054c42bb default_fatal_finish + 68 4 libdovecot.0.dylib 0x00000001054c4f66 i_internal_error_handler + 0 5 libdovecot.0.dylib 0x00000001054c453d i_panic + 158 6 libdovecot-storage.0.dylib 0x00000001053aaebb index_mail_close_streams_full + 199 7 libdovecot-storage.0.dylib 0x00000001053aaf29 index_mail_close + 44 8 libdovecot-storage.0.dylib 0x00000001053ab6bd index_mail_free + 48 9 libdovecot-storage.0.dylib 0x000000010538a19a mail_free + 15 10 libdovecot-storage.0.dylib 0x00000001053dd3b3 imap_msgpart_url_free + 65 11 imap 0x000000010532d563 imap_urlauth_fetch_abort_local + 30 12 imap 0x000000010532cb96 imap_urlauth_fetch_abort + 38 13 imap 0x000000010532cb54 imap_urlauth_fetch_deinit + 24 14 imap 0x00000001053218bd cmd_urlfetch_finish + 45 15 imap 0x0000000105321aa3 cmd_urlfetch_continue + 167 16 imap 0x0000000105323ef8 command_exec + 55 17 imap 0x0000000105323a20 client_output_cmd + 18 18 imap 0x0000000105322497 client_output + 143 19 libdovecot.0.dylib 0x00000001054dc610 stream_send_io + 53 20 libdovecot.0.dylib 0x00000001054d2c74 io_loop_call_io + 46 21 libdovecot.0.dylib 0x00000001054d3c85 io_loop_handler_run + 214 22 libdovecot.0.dylib 0x00000001054d2e1f io_loop_run + 77 23 libdovecot.0.dylib 0x00000001054920c6 master_service_run + 24 24 imap 0x000000010532ba66 main + 1010 25 libdyld.dylib 0x00007fff8f7887bd start + 1

2 2

[Dovecot] Dovecot Postfix Quota Policy Service
by Daniel Luttermann 07 May '13

07 May '13

Hallo zusammen, über den Policy Service von Dovecot zum Abfragen der User Quotas wurde ja schon diskutiert - auch gibt es eine gute Anleitung zum Einrichten, nur leider bekomme ich den Policy Server nicht korrekt konfiguriert. Folgende Fehler werden protokolliert: May 3 22:00:13 mail postfix/smtpd[17463]: warning: access table unix:private/quota-status entry has empty value May 3 22:00:42 mail dovecot: quota-status(daniel(a)dlutt.de): Error: user daniel(a)dlutt.de: Error reading configuration: net_connect_unix(/usr/var/run/dovecot/config) failed: Permission denied Es ist dabei so, dass nach einem Reload der Dienste die erste Mail noch zugestellt wird, die folgende, eingehende Mail dann jedoch abgelehnt wird. Nachfolgend die kompletten Logeinträge: May 3 22:00:12 mail postfix/smtpd[17463]: connect from mail-ie0-x236.google.com[2607:f8b0:4001:c03::236] May 3 22:00:13 mail postfix/smtpd[17463]: warning: access table unix:private/quota-status entry has empty value May 3 22:00:13 mail postfix/smtpd[17463]: 0EB81172391A: client=mail-ie0-x236.google.com[2607:f8b0:4001:c03::236] May 3 22:00:13 mail postfix/cleanup[17475]: 0EB81172391A: message-id=<CAKrzS114MaJGND9BxYUiixMMtORmXJqTA3W13B=QAr0YW_nkUg(a)mail.gmail.com> May 3 22:00:13 mail postfix/qmgr[17429]: 0EB81172391A: from=<sender(a)googlemail.com>, size=5409, nrcpt=1 (queue active) May 3 22:00:13 mail postfix/smtpd[17463]: disconnect from mail-ie0-x236.google.com[2607:f8b0:4001:c03::236] May 3 22:00:13 mail klms-smtp_proxy: Message from sender(a)googlemail.com to daniel(a)dlutt.de passed May 3 22:00:14 mail postfix/smtpd[17482]: connect from localhost[127.0.0.1] May 3 22:00:14 mail postfix/smtpd[17482]: 00776172391C: client=localhost[127.0.0.1], orig_client=mail-ie0-x236.google.com[2607:f8b0:4001:c03::236] May 3 22:00:14 mail postfix/cleanup[17475]: 00776172391C: message-id=<CAKrzS114MaJGND9BxYUiixMMtORmXJqTA3W13B=QAr0YW_nkUg(a)mail.gmail.com> May 3 22:00:14 mail postfix/qmgr[17429]: 00776172391C: from=<sender(a)googlemail.com>, size=6195, nrcpt=1 (queue active) May 3 22:00:14 mail postfix/smtpd[17482]: disconnect from localhost[127.0.0.1] May 3 22:00:14 mail postfix/smtp[17476]: 0EB81172391A: to=<daniel(a)dlutt.de>, relay=127.0.0.1[127.0.0.1]:10025, delay=1.2, delays=0.54/0.02/0/0.65, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as 00776172391C) May 3 22:00:14 mail postfix/qmgr[17429]: 0EB81172391A: removed May 3 22:00:14 mail dovecot: lmtp(17484): Connect from local May 3 22:00:14 mail dovecot: lmtp(17484, daniel(a)dlutt.de) dEa8BE4XhFFMRAAAG4AjPw: sieve: msgid=<CAKrzS114MaJGND9BxYUiixMMtORmXJqTA3W13B=QAr0YW_nkUg(a)mail.gmail.com>: stored mail into mailbox 'INBOX' May 3 22:00:14 mail dovecot: lmtp(17484): Disconnect from local: Successful quit May 3 22:00:14 mail postfix/lmtp[17483]: 00776172391C: to=<daniel(a)dlutt.de>, relay=mail.dlutt.de[private/dovecot-lmtp], delay=0.11, delays=0.05/0.02/0.01/0.03, dsn=2.0.0, status=sent (250 2.0.0 <daniel(a)dlutt.de> dEa8BE4XhFFMRAAAG4AjPw Saved) May 3 22:00:14 mail postfix/qmgr[17429]: 00776172391C: removed May 3 22:00:36 mail postfix/postscreen[17433]: CONNECT from [2607:f8b0:4001:c03::230]:43653 to [2a00:1828:2000:206::2]:25 May 3 22:00:42 mail postfix/postscreen[17433]: PASS NEW [2607:f8b0:4001:c03::230]:43653 May 3 22:00:42 mail postfix/smtpd[17463]: connect from mail-ie0-x230.google.com[2607:f8b0:4001:c03::230] May 3 22:00:42 mail dovecot: quota-status(daniel(a)dlutt.de): Error: user daniel(a)dlutt.de: Error reading configuration: net_connect_unix(/usr/var/run/dovecot/config) failed: Permission denied May 3 22:00:42 mail postfix/smtpd[17463]: NOQUEUE: reject: RCPT from mail-ie0-x230.google.com[2607:f8b0:4001:c03::230]: 450 4.7.1 <daniel(a)dlutt.de>: Recipient address rejected: Internal error occurred. Refer to server log for more information.; from=<absender(a)googlemail.com> to=<daniel(a)dlutt.de> proto=ESMTP helo=<mail-ie0-x230.google.com> May 3 22:00:42 mail postfix/smtpd[17463]: disconnect from mail-ie0-x230.google.com[2607:f8b0:4001:c03::230] May 3 22:00:53 mail postfix/postfix-script[17560]: stopping the Postfix mail system May 3 22:00:53 mail postfix/master[17425]: terminating on signal 15 May 3 22:02:51 mail dovecot: master: Warning: Killed with signal 15 (by pid=17681 uid=0 code=kill) Das Problem tritt mit dem unix_listener, aber auch mit dem inet_listener auf - beide Male beschwert sich Dovecot über den Zugriff auf den Service "config". Ich habe auch mal versucht, die Berechtigungen für den Service "config" auf World-Readable zu setzen, leider hat dies auch nicht geklappt, wobei ich nicht weiß, ob dieser unbedingt mit dem Problem etwas zu tun hat. Auch beim Debug-Logging sind leider nicht mehr Infos zum Fehler zu finden. Zum Einsatz kommt aktuell Postfix 2.10.0 und Dovecot 2.2.1. Die Dovecot Quota Konfiguration sieht so aus, wie bei sys4 beschrieben: service quota-status { executable = quota-status -p postfix unix_listener /var/spool/postfix/private/quota-status { group = postfix mode = 0660 user = postfix } client_limit = 1 } Mittlerweile habe ich schon einige Optionen und Berechtigungen ausprobiert, aber der Fehler bleibt leider der gleiche. Hat vielleicht jemand noch einen Tip? Danke schon mal. -- Daniel

6 18

[Dovecot] pop3 login ok then disconnects right away..outlook
by markh 07 May '13

07 May '13

I have dovecot with postfix on ubuntu server 12 I cannot log into outgoing server with outlook. It logs into incoming server ok with outlook. I can telnet pop3 and imap ok. Looking at mail log it looks like dovecot auths: ok then shows pop3-login: Login: user=<user> USER#etc ok ... then next line shows..same second pop3(user): disconnected: Logged out top/0/0 etc. I have tried a lot of combinations with ssl ,tls none Any suggestions...thanks -- View this message in context: http://dovecot.2317879.n4.nabble.com/pop3-login-ok-then-disconnects-right-a… Sent from the Dovecot mailing list archive at Nabble.com.

2 1

[Dovecot] v2.2.1 released
by Timo Sirainen 07 May '13

07 May '13

http://dovecot.org/releases/2.2/dovecot-2.2.1.tar.gz http://dovecot.org/releases/2.2/dovecot-2.2.1.tar.gz.sig - mailbox_list_index=yes was broken. - LAYOUT=index didn't list subscriptions. - auth: Multiple master passdbs didn't work. - Message parsing (e.g. during search) crashed when multipart message didn't actually contain any parts.

15 25

[Dovecot] Upgrading from 2.0 to 2.2
by Asai 06 May '13

06 May '13

Greetings, Is this possible to upgrade directly from 2.0 to 2.2? If so, is there a guide for doing this? Thank you. -- --Asai

2 1

[Dovecot] imap crash during URLFETCH
by Mike Abbott 06 May '13

06 May '13

Dovecot-2.2.1's imap processes crash reliably when they use an IMAP URL with an invalid access specifier. A backtrace and some debug output follows. The crash is likely caused by imap_urlauth_fetch_parsed() returning 0 without having set *mpurl_r to NULL, and then imap_urlauth_fetch_local() freeing an uninitialized pointer. Exception Type: EXC_BAD_ACCESS (SIGSEGV) Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000001059 0 libdovecot-storage.0.dylib 0x000000010b06a383 imap_msgpart_url_free + 17 1 imap 0x000000010afc71cc imap_urlauth_fetch_local + 770 2 imap 0x000000010afc6dcf imap_urlauth_fetch_url + 439 3 imap 0x000000010afbb489 cmd_urlfetch + 580 4 imap 0x000000010afbdf4d command_exec + 55 5 imap 0x000000010afbdabb client_command_input + 34 6 imap 0x000000010afbdc7c client_command_input + 483 7 imap 0x000000010afbd351 client_handle_input + 239 8 imap 0x000000010afbc613 client_input + 119 9 libdovecot.0.dylib 0x000000010b111c74 io_loop_call_io + 46 10 libdovecot.0.dylib 0x000000010b112c85 io_loop_handler_run + 214 11 libdovecot.0.dylib 0x000000010b111e1f io_loop_run + 77 12 libdovecot.0.dylib 0x000000010b0d10c6 master_service_run + 24 13 imap 0x000000010afc5aba main + 1010 14 libdyld.dylib 0x00007fff89e5f7bd start + 1 Apr 29 20:00:31 imap(pid 82429 user mja): Debug: Fetching local URLAUTH imap://mja@duck.example.com/INBOX;uidvalidity=1366726248/;uid=19;urlauth=submit+mja:internal:012c9c6a3d74db6509e4a3802a0f5edf64546608b8 Apr 29 20:00:31 imap(pid 82429 user mja): Debug: Failed to fetch URLAUTH "imap://mja@duck.example.com/INBOX;uidvalidity=1366726248/;uid=19;urlauth=submit+mja:internal:012c9c6a3d74db6509e4a3802a0f5edf64546608b8": No 'submit+mja' access allowed for user mja Apr 29 20:00:31 imap(pid 82429 user mja): Fatal: master: service(imap): child 82429 killed with signal 11 (core dumps disabled)

2 3

[Dovecot] doveadm search causes replication error message
by Oli Schacher 06 May '13

06 May '13

Hi # 2.2.1 (83d83f55e5c2+) / dsync replicated setup I just noticed that 'doveadm search' apparently tries to replicate mailboxes and spits out errors if a mailbox in the search query is not found: #doveadm search -u user(a)example.com mailbox Spamreport doveadm(user(a)example.com): Error: Syncing mailbox Spamreport failed: Mailbox doesn't exist: Spamreport this is especially problematic with -A searches as this causes a error message for every user which doesn't have that folder. Is this a bug or intended behaviour? Should I just 2>/dev/null these errors in doveadm scripts? Thanks Oli -- message transmitted on 100% recycled electrons

2 2

[Dovecot] SELECT/EXAMINE don't report URLMECH
by Mike Abbott 06 May '13

06 May '13

In dovecot-2.2.1 neither the SELECT nor the EXAMINE commands include an untagged URLMECH reply. (Note, this is not the one mandated by the RESETKEY command.) AFAICT RFC 4467 does not require an URLMECH reply to SELECT or EXAMINE but without it clients have no way of knowing about authorization mechanisms other than INTERNAL. Now I know dovecot-2.2 supports only the INTERNAL mechanism at present so this is probably harmless, but still I think it's worthwhile to ask: Is the absence of the URLMECH reply intentional or an oversight? For comparison Apple's enhanced dovecot replies: c1 select inbox [...] * OK [URLMECH INTERNAL] Mechanisms supported c1 OK [READ-WRITE] Select completed.

2 1

[Dovecot] many SSH connexions with dsynx/SSH replication
by Emmanuel Dreyfus 06 May '13

06 May '13

Hi I am trying replication over dsync/ssh, as explained there: http://wiki2.dovecot.org/Replication I added the options below to dovecot.conf. It works, but it seems there is a new SSH connexion for each user, which is a bit overkill performance-wise. Since I sync as root, I guess there is a way of haing everything on the same SSH connexion? --- cut here --- mail_plugins = $mail_plugins notify replication service replicator { process_min_avail = 1 } dsync_remote_cmd = ssh -lroot %{host} doveadm dsync-server -u%u plugin { mail_replica = remote:root@mail1.example.net } service aggregator { fifo_listener replication-notify-fifo { user = dovecot } unix_listener replication-notify { user = dovecot } } service replicator { unix_listener replicator-doveadm { mode = 0600 } } service doveadm { inet_listener { port = 12345 ssl = yes } } doveadm_port = 12345 ssl_client_ca_file = /etc/openssl/certs/ca.crt doveadm_proxy_port = 0 --- cut here --- -- Emmanuel Dreyfus manu(a)netbsd.org

2 1

[Dovecot] dsyncing lazy_expunge namespace
by Angel L. Mateo 06 May '13

06 May '13

Hello, I'm in the process of migrating mailbox from one dovecot server running dovecot 2.1.9 with mailboxes stored in maildir format to a newer one running 2.1.16 with mailboxes stored in mdbox format. To migrate mailboxes I'm using dsync as explained at http://wiki2.dovecot.org/Tools/Dsync. The command I'm running in the newer server is: sudo dsync -o mailbox_list_index=no mirror -R -u <user> imapc: The mailbox of the user is correctly synced to the newer server, except the lazy_expunge namespace, which is not synced at all. The config in my old server is: namespace { # hidden = yes # list = no # Temporally, only for migration hidden = no list = yes location = maildir:~/Maildir/expunged prefix = BORRADOS. separator = . } and in the newer one is: namespace { hidden = yes list = no location = mdbox:%h/expunged:INDEX=/mail/indexes/%2Ln/%Ln/expunged prefix = BORRADOS/ separator = / } With a tcpdump I have checked that old servers list the namefolder, this is the IMAP dialog for an example user: * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN] Dovecot ready. 2 AUTHENTICATE PLAIN YW5nZWwubHVpcwBtYXN0ZXIAVkFzR293ZW0= 2 OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS THREAD=ORDEREDSUBJECT MULTIAPPEND UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS SPECIAL-USE QUOTA ACL RIGHTS=texk] Logged in 1 LIST "" "" * LIST (\Noselect) "." "" 1 OK List completed. 3 LIST "" "*" * LIST (\HasNoChildren) "." "SPAM" * LIST (\HasNoChildren) "." "Trash" * LIST (\HasNoChildren) "." "Drafts" * LIST (\HasNoChildren) "." "INBOX" * LIST (\Noselect \HasNoChildren) "." "BORRADOS" 3 OK List completed. 4 STATUS "SPAM" (UIDNEXT UIDVALIDITY) * STATUS "SPAM" (UIDNEXT 3 UIDVALIDITY 1316372649) 4 OK Status completed. 5 EXAMINE "SPAM" * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) ... But "BORRADOS" is never selected in the rest of the dialog. Any idea? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información y las Comunicaciones Aplicadas (ATICA) http://www.um.es/atica Tfo: 868889150 Fax: 868888337

2 1

[Dovecot] XFS vs EXT4 for mail storage
by Charles Marcus 05 May '13

05 May '13

Hello, I'm in the process of finalizing the spec for my new dovecot VM, and this is the last question I need to address... I've read until I'm just about decided on XFS, but I have no experience with it (been using reiserfs on my old box (@ 8 yrs old now), and never had a problem (knock on wood), but considering its current situation (little to no development support for reasons everyone is aware of), I've decided now is the time to switch. It came down to XFS or EXT4, and I like what I've read about XFS, but am unsure how to tune it (or even if I should). I've decided to use mdbox for storage (been using maildir), and will enable SIS for attachments. So, anyone (Stan?) have any suggestions? Should I go with EXT4? Or XFS with just the defaults? Or XFS with one or more tuned parameters? Appreciate any suggestions (including links to docs dealing with tuning XFS for my mail storage conditions that are written more at the layman level) or comments from anyone experienced using both... Thanks, -- Best regards, Charles

11 37

Re: [Dovecot] qmail-ldap LDA Delivery and sieve
by Deepak 04 May '13

04 May '13

Hi I used the below filter in my dovecot-ldap-userdb.conf file, user_attrs = homeDirectory=home, uidNumber=uid, gidNumber=gid user_filter = (&(objectClass=posixAccount)(|(mail=%u)(mailAlternateAddress=%u) (uid=%u))) This above filter was working fine for me, and it's delivering fine for all the domains. seive is also working fine. The "-d" in dovecot-lda will do userdb lookup with ldap.

1 0

[Dovecot] dovecot antispam plugin is not woking
by Ravi Kanchan 04 May '13

04 May '13

Hi All, I am using dovecot version 2.0.9 DSPAM Anti-Spam Suite 3.10.2 (agent/library) ClamAV 0.97.7/17102 and dspam antispam plugin dovecot-antispam-plugin-43880985e3dd and plugin configuration is given below: protocol imap { mail_plugins = " antispam autocreate" } protocol pop3 { mail_plugins = antispam autocreate } plugin { antispam_allow_append_to_spam = YES antispam_backend = dspam antispam_crm_args = --config=/home/vmail antispam_dspam_args = --client;--user vmail antispam_dspam_binary = /usr/bin/dspam antispam_dspam_notspam = --class=innocent antispam_dspam_result_header = X-DSPAM-Result antispam_dspam_spam = --class=spam antispam_mail_tmpdir = /tmp antispam_signature = X-DSPAM-Signature antispam_signature_missing = error antispam_spam = Spam } dspam bin path: [root@sogo ~]# which dspam /usr/bin/dspam but my dspam plugin configuration is not working. and I am not getting any log from dspam. My dspam server is working prefect. cna anyone help me Regard's Ravi Kanchan Sharma

4 8

[Dovecot] Dovecot has no understandable configuration any more
by forum 04 May '13

04 May '13

Hello, for many years i used an mailserver with dovecot V1 very satisfied! http://mailserver.decotrain.de/ One of the reasons to use dovecot was a simply configuration. Dovecot was the best choice for IMAP for me! Now i updated the server to Debian testing with dovecot 2.1.7. It's not possible for me to get a running authentication for virtual mail users! I recently found this mailing and have the same problem: http://www.dovecot.org/list/dovecot/2012-March/064181.html The documentation says *nothing* about my problem how to authenticate with mysql! http://wiki2.dovecot.org/VirtualUsers I can solve the problem only with try and error without a chance in this complex system. It's nice to have all this possibilites but they are not useful if not documented. There should be some clear examples for different scenarios to be found in your wiki. My problem at this time: I don't know how to configure the userdb to work with mysql authentification? All mail is running under the special user mail. dovecot.conf ============ disable_plaintext_auth = yes passdb { driver = sql # Path for SQL configuration file, see example-config/dovecot-sql.conf.ext args = /etc/dovecot/dovecot-sql.conf } userdb { driver = prefetch } first_valid_uid = 8 last_valid_uid = 8 first_valid_gid = 8 last_valid_gid = 8 mail_location = maildir:/srv/mail/%d/%n dovecot-sql.conf ================ driver = mysql connect = host=/var/run/mysqld/mysqld.sock dbname=... => WORKS! default_pass_scheme = SHA1 password_query = SELECT password, '/srv/mail/%d/%n' AS home, 'mail' AS uid, 'mail' AS gid FROM user WHERE username = '%n' AND domain = '%d' AND IMAP_allowed = 'YES' Errors ====== Apr 30 10:28:22 auth: Debug: client out: OK 1 user=xxxx@yyyy home=/srv/mail/yyyy/xxxx uid=mail gid=mail Apr 30 10:28:22 auth: Debug: master in: REQUEST 3163291649 5347 1 87066c907eef8f4e5ed71319b560dd2a Apr 30 10:28:22 auth: Error: prefetch(xxxx@yyyy,::1,<doTKyI/brgAAAAAAAAAAAAAAAAAAAAAB>): userdb lookup not possible with only userdb prefetch Apr 30 10:28:22 auth: Error: userdb(xxxx@yyyy,::1,<doTKyI/brgAAAAAAAAAAAAAAAAAAAAAB>): user not found from userdb prefetch Apr 30 10:28:22 auth: Debug: master out: NOTFOUND 3163291649 Apr 30 10:28:22 imap: Error: Authenticated user not found from userdb, auth lookup id=3163291649 (client-pid=5347 client-id=1) Apr 30 10:28:22 imap-login: Info: Internal login failure (pid=5347 id=1) (internal failure, 1 succesful auths): user=<karsten(a)dct.mine.nu>, method=PLAIN, rip=::1, lip=::1, mpid=5352, secured, session=<doTKyI/brgAAAAAAAAAAAAAAAAAAAAAB> I have no idea how to solve the problem and up to know i could not find an example with google. Please help. Best regards Karsten

8 11

[Dovecot] Accessing mail files not owned by imap login user
by PaulM47 03 May '13

03 May '13

Hi, I have managed to set up a 'maildir' based mail system using fetchmail and procmail that delivers sorted mail to folders /var/spool/mail/user1, ../user2 etc. 'user1', 'user2' etc. are real users but the mail system is run under logged in user 'mailserver'. The mail folders are owned by 'user1', 'user2' etc. but mail files, when delivered, are owned by 'mailserver'. I've been unable to find a way to change this behaviour :-( Dovecot is configured by adding the single line 'mail_location = maildir:/var/spool/mail/%u' to 'dovecot.conf', everything else is as installed. When I make an imap connection as 'user1' the logon is successful, the mail files are moved from ../new/ to ../cur/ but are invisible to the imap client. If I 'chown' the mail files to 'user1' they instantly become visible to the imap client. I gather from googling info on dovecot I can configure dovecot to allow 'user1', when logged in, to access the mail files owned by 'mailserver'. Is this simple to do, and if so how do I do it please ? Thanks PaulM -- View this message in context: http://dovecot.2317879.n4.nabble.com/Accessing-mail-files-not-owned-by-imap… Sent from the Dovecot mailing list archive at Nabble.com.

3 3

[Dovecot] feature request: pipe for custom quota dict queries
by Jeff Gustafson 03 May '13

03 May '13

Just a followup to my previous post. I appears that a pipe for quota queries via dict is not supported right now. Because of the way we group things we need more flexibility. I'd like to propose that dovecot should support quota queries just like userdb dict queries. My expertise is not C, but I might try to poke around and see if I can make something work. ...Jeff

1 0

[Dovecot] sieve: deleteheader sometimes fails [bug]
by Daniel Piddock 03 May '13

03 May '13

Hi, We're using Dovecot 2.1.16 with Pigeonhole 0.3.4. Mail is delivered by exim4 to the dovecot LDA. Sometimes users are unable to delete headers. I've narrowed the problem down to preceding the deleteheader command with a query against the body. A simple example: """ require ["body", "editheader", "fileinto"]; if body :contains "!TEST!" { fileinto "INBOX.Trash"; stop; } deleteheader "Subject"; addheader "Subject" "Testing"; """ Putting the "deleteheader" above the "if body" causes it to be deleted correctly. Although I've used Subject in this example it happens for other headers. Cheers, Dan

2 5

[Dovecot] dovecot 1.2.5 Fatal: setgid(5000(vmail)) Operation not permitted
by Mosh Mage 03 May '13

03 May '13

This is the error I'm getting (whenever i recieve and email): *deliver() : Fatal: setgid(5000(vmail)) failed with euid=5000(vmail), gid=8(mail), egid=8(mail): Operation not permitted (This binary should probably be called with process group set to 5000(vmail) instead of 8(mail)) * I am at loss. I have tried "everything" i could think of (besides purging the machine and do it all over again, which is not an option -- unless it is). Can anyone help me fix this? # 1.2.15: /etc/dovecot/dovecot.conf # OS: Linux 3.2.13-grsec-xxxx-grs-ipv6-64-vps x86_64 Debian 6.0.6 ext3 log_timestamp: %Y-%m-%d %H:%M:%S disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login verbose_proctitle: yes mail_uid: vmail mail_gid: vmail mail_location: maildir:/var/zpanel/vmail/%d/%n mail_debug: yes mbox_write_locks: fcntl dotlock auth default: mechanisms: plain login verbose: yes debug: yes debug_passwords: yes passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 432 user: vmail group: vmail plugin: trash: /etc/dovecot/dovecot-trash.conf # /etc/dovecot/dovecot-sql.conf driver = mysql connect = host=localhost dbname=zpanel_postfix user=USERNAME password=AWESOMEPASSWORD default_pass_scheme = PLAIN password_query = \ SELECT name, domain, password \ FROM mailbox WHERE name = '%n' AND domain = '%d' user_query = \ SELECT maildir \ FROM mailbox WHERE name = '%n' AND active = '1' AND domain = '%d' #This is my ls -la drwxrwsrwx 5 vmail vmail 4096 May 2 18:39 vmail #and this is inside vmail/ drwx--S--- 3 vmail vmail 4096 May 2 18:39 asfaltotejo.com drwx--S--- 3 vmail vmail 4096 May 2 12:35 gestaoconteudos.pt drwx--S--- 17 vmail vmail 4096 May 2 15:34 tribanet.com #/var/run/dovecot srw-rw---- 1 vmail vmail 0 May 2 19:46 auth-master srw------- 1 root root 0 May 2 19:46 auth-worker.6564 srwxrwxrwx 1 root root 0 May 2 19:46 dict-server lrwxrwxrwx 1 root root 25 May 2 19:46 dovecot.conf -> /etc/dovecot/dovecot.conf drwxr-x--- 2 root dovecot 4096 May 2 19:46 login

1 0

[Dovecot] CATENATE allows zero parts
by Mike Abbott 03 May '13

03 May '13

I'm pleased to see that dovecot-2.2 includes support for RFCs 4467 and 4469 (URLAUTH and CATENATE). I have begun testing these features (in dovecot-2.2.1) and comparing their functionality against Apple's implementation. So far I have discovered a few inconsistencies. I will report each of these, and any more that I may find, in separate threads. The first issue is that using CATENATE with no message parts works but, IMO, shouldn't: a2 append inbox catenate () a2 OK [APPENDUID 1366726248 9] Append completed. For comparison this is how Apple's enhanced dovecot in OS X Server handles this request: a2 append inbox catenate () a2 BAD Invalid arguments. According to RFC 4469 section 3 CATENATE requires "one or more message parts." This is formalized in section 5: append-data =/ "CATENATE" SP "(" cat-part *(SP cat-part) ")" and in RFC 3501 section 9 which states that "[ABNF] rules MUST be followed strictly." I believe that permitting zero cat-parts is contrary to the RFC, although I can understand permitting it under the general doctrine of "servers should be liberal in what they accept, and clients strict in what they send." Is accepting zero cat-parts an intentional exception to the RFC or an oversight?

2 2

[Dovecot] CATENATE doesn't support literal+ url
by Mike Abbott 03 May '13

03 May '13

Dovecot-2.2.1 does not appear to support URLs specified via non-synchronizing literals (RFC 2088 LITERAL+), and also does not read and discard the literal+ input after reporting the error. This results in the literal+ input being interpreted as IMAP commands, which could alter the user's mail store in unexpected ways and/or lead to the abrupt disconnection of the client for exceeding the maximum number of bad IMAP commands. Example using dovecot-2.2.1 (note that the text nonsync literal includes the invisible CRLFs: "foobarCRLFbarbazCRLF"): a3 append inbox catenate (url {9+} /some-url text {16+} foobar barbaz ) a4 noop a3 BAD Error in IMAP command APPEND: Invalid arguments. foobar BAD Error in IMAP command : Unknown command. barbaz BAD Error in IMAP command : Unknown command. ) BAD Error in IMAP command : Unknown command. a4 OK NOOP completed. Example using Apple's enhanced dovecot in OS X Server: a3 append inbox catenate (url {9+} /some-url text {16+} foobar barbaz ) a4 noop a3 NO [BADURL /some-url] missing or invalid uid a4 OK NOOP completed. I believe the RFCs indicate that nonsync literal URLs should be permitted. RFC 4469 section 5: append-data =/ "CATENATE" SP "(" cat-part *(SP cat-part) ")" cat-part = text-literal / url url = "URL" SP astring RFC 3501 section 9: astring = 1*ASTRING-CHAR / string string = quoted / literal RFC 2088 section 4: literal ::= "{" number ["+"] "}" CRLF *CHAR8

2 4

[Dovecot] Tuning!
by Rafael VOlpe TI 02 May '13

02 May '13

Hi Buddies, I have 2 servers running dovecot + postfix for pop/imap users. The users mailbox are in a Nfs storage. The load of server is ranging at 3.0 to 15.0. I really dont know what happened.. I read a lot about tuning of dovecot, and the changes are applied, how you can see. The Hardware of server is really good! The host have 8GB of mem and 2 sockets with 2 cores anyone. The server receives 900-1000 user connections in pop and imap. How i can aprimmorate this processes? Some errors are displayed on the console randomly when the load rises. Example: May 02 13:57:42 pop3(user(a)domain.com): Error: Timeout (180s) while waiting for lock for transaction log file //var/vmail/ domain.com/user//dovecot.index.log May 02 13:57:42 pop3(user(a)domain.com): Error: Couldn't init INBOX: Internal error occurred. Refer to server log for more information. [2013-05-02 13:54:40] May 02 13:57:42 pop3(user(a)domain.com): Info: Mailbox init failed top=0/0, retr=0/0, del=0/0, size=0 I really appreciate any suggestion! Thanks and Regards, Rafael Volpe Dovecot conf: # 2.0.19: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-40-generic x86_64 Ubuntu 12.04.2 LTS auth_mechanisms = plain login auth_verbose = yes debug_log_path = /var/log/dovecot-debug.log disable_plaintext_auth = no dotlock_use_excl = no first_valid_gid = 125 first_valid_uid = 125 last_valid_gid = 125 last_valid_uid = 125 log_path = /var/log/dovecot.log mail_debug = yes mail_fsync = always mail_location = maildir:/%Lh/:INDEX=/%Lh/ mail_nfs_index = yes mail_nfs_storage = yes mmap_disable = yes passdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } protocols = " imap pop3" service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } service_count = 0 } service pop3-login { inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 ssl = yes } } ssl_cert = </etc/postfix/ssl/wildcard.domain.com.crt ssl_key = </etc/postfix/ssl/wildcard.domain.com.key userdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } verbose_proctitle = yes protocol imap { imap_idle_notify_interval = 2 mins mail_max_userip_connections = 150 } protocol pop3 { pop3_lock_session = no pop3_uidl_format = %08Xu%08Xv } Postfix conf: alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no bounce_queue_lifetime = 1d broken_sasl_auth_clients = yes config_directory = /etc/postfix content_filter = smtp-amavis:[127.0.0.1]:10024 inet_interfaces = all mailbox_size_limit = 0 maximal_queue_lifetime = 1d message_size_limit = 20240000 myhostname = myname.mydomain.com mynetworks = 127.0.0.0/8 myorigin = /etc/mailname policy-spf_time_limit = 3600s readme_directory = no recipient_bcc_maps = mysql:/etc/postfix/mysql_bcc.cf recipient_delimiter = + relay_domains = proxy:mysql:/etc/postfix/mysql_relay_domains_maps.cf relayhost = sender_bcc_maps = mysql:/etc/postfix/mysql_bcc.cf smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = Welcome to $myhostname smtpd_client_restrictions = permit_mynetworks, permit_sasl_authenticated, check_client_access mysql:/etc/postfix/mysql_access.cf, reject_unknown_client, reject_unknown_client_hostname, reject_unauth_pipelining, reject_rbl_client bl.spamcop.net, reject_rbl_client zen.spamhaus.org, reject_rbl_client b.barracudacentral.org smtpd_end_of_data_restrictions = check_policy_service inet:127.0.0.1:10031 smtpd_helo_required = yes smtpd_helo_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_non_fqdn_helo_hostname, reject_invalid_helo_hostname, reject_invalid_hostname smtpd_recipient_restrictions = reject_unknown_sender_domain, reject_unknown_recipient_domain, reject_non_fqdn_sender, reject_non_fqdn_recipient, reject_unlisted_recipient, check_policy_service inet:127.0.0.1:10031, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination, check_policy_service unix:private/policy-spf smtpd_reject_unlisted_sender = yes smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = $mydomain smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_sender_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_pipelining, reject_unauth_destination smtpd_timeout = 30 smtpd_tls_cert_file = /etc/postfix/ssl/wildcard.domain.com.crt smtpd_tls_key_file = /etc/postfix/ssl/wildcard.domain.com.key smtpd_tls_security_level = may smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache transport_maps = mysql:/etc/postfix/mysql_transport.cf vacation_destination_recipient_limit = 1 virtual_alias_maps = mysql:/etc/postfix/mysql_virtual_alias_maps.cf virtual_gid_maps = static:125 virtual_mailbox_base = /var/vmail virtual_mailbox_domains = mysql:/etc/postfix/mysql_virtual_domains_maps.cf virtual_mailbox_limit = 51200000 virtual_mailbox_maps = mysql:/etc/postfix/mysql_virtual_mailbox_maps.cf virtual_minimum_uid = 125 virtual_transport = virtual virtual_uid_maps = static:125

3 2

[Dovecot] Dovecot vs MBox
by Gregory Sloop 02 May '13

02 May '13

I'm still in the "what's wrong" stage of figuring out what's going on. But I've got a mail user who isn't getting new messages. Postfix accepts it and drops it in the users mbox. [This is verified. If I tail the Mbox, I can see the new messages.] "Mail" will see the messages too. But dovecot doesn't seem to know they exist. I don't think the MBox is corrupt, as I've tossed the first few messages in hopes that it would then read the rest, but no luck. Any ideas where to look next, what I might do to force dovecot to forget message ID's etc - that might force it to read the whole mailbox file again? [Or a pointer as to where it might be most productive to poke next?] TIA -Greg -- Gregory Sloop, Principal: Sloop Network & Computer Consulting 503.251.0452 x121 Voice | 503.251.0452 Fax www.sloop.net mailto:gregs@sloop.net

5 7

[Dovecot] CATENATE allows empty messages
by Mike Abbott 02 May '13

02 May '13

Dovecot-2.2.1 allows empty messages to be APPENDed when using CATENATE: b1 append inbox catenate (text {0+} ) b1 OK [APPENDUID 1366726248 12] Append completed. Contrast this with regular APPEND: b2 append inbox {0+} b2 NO Can't save a zero byte message. Note that zero-size literals are OK but zero-size messages are not. So while "b1" above should fail like "b2", this should continue to succeed: b3 append inbox catenate (text {0+} text {8+} foobar ) b3 OK [APPENDUID 1366726248 13] Append completed.

3 6

[Dovecot] Slow DNS warnings (proxy/auth)
by Christian Balzer 02 May '13

02 May '13

Hello, I've just finished transiting our proxies from perdition to dovecot (2.1.7-7 Debian). Yesterday 12 messages (all within the same second) like this caught my attention: --- Apr 25 17:19:09 pp11 dovecot: auth: Warning: proxy(redacted(a)gol.com,xx.xx.xx.xx,<26hUEivbfQBlMrMS>): DNS lookup for mb04.dentaku.gol.com took 5.002 s --- Now this machine at that time was handling a load of about 2 logins per second, about 20% of what it previously handled with perdition w/o a hiccup. It also runs a local caching nameserver and the A record for the mailbox server in question was most definitely cached at the time (verified via TTL). The machine in question was very bored and certainly capable of handling hundreds if not thousands of DNS queries per second at that moment. In short, I can't see any reason how the lookup could have taken so long, so my guess is there are some issues with the dns-helper (locking, stepping on each others feet, not being spawned fast enough) causing this. Some general remarks, dovecot as proxy feels "heavier" than perdition. In the CPU area that's probably a more subjective impression, because all the little helper processes make it clear what's going on where. Though the "config" process being rather active is something that perdition definitely doesn't do, it reads the config once at start time and that's it. All the IPC and central processes of course also make dovecot rather file handle hungry. Memory wise it's about 35% bigger than perdition and that's not subjective at all. ^o^ About one MB per proxy process/connection for dovecot in my case. Caveat emptor. ^o^ Regards, Christian -- Christian Balzer Network/Systems Engineer chibi(a)gol.com Global OnLine Japan/Fusion Communications http://www.gol.com/

2 1

Re: [Dovecot] XFS vs EXT4 for mail storage
by Reindl Harald 02 May '13

02 May '13

Am 02.05.2013 17:31, schrieb Charles Marcus: > On 2013-05-02 10:45 AM, Reindl Harald <h.reindl(a)thelounge.net> wrote: >> "man mount" is very generic and doe snot cover any option >> there is also no "man mount.ntfs" while "mount.ntfs" command exists > > ? > > man mount, at least mine, shows first the FILESYSTEM INDEPENDENT MOUNT OPTIONS, then as you scroll down, you'll get > to all of the additional filesystem specific options, ie, for xfs... > > So, not sure what you mean by 'does not cover any option'... typo - meant "does not cover ALL options" someone has to write the manpages, there are millions of options all over the software-world which did it not make into manpages google for "xfs delaylog" leads to http://xfs.org/index.php/XFS_FAQ http://xfs.org/index.php/XFS_FAQ#Q:_I_want_to_tune_my_XFS_filesystems_for_.… For mount options, the only thing that will change metadata performance considerably are the logbsize and delaylog mount options so how can it be redhat-specific if it is mentioned upstream?

1 0

[Dovecot] NTLM authentication with Outlook 2010
by Kevin Bridges 01 May '13

01 May '13

All, I have a Ubuntu 12.04.2 box running Dovecot 2.0.19. I have it configured for our active directory. WBinfo and ntlm_auth work great. I am trying to get sso to work with ntlm. Gssapi with thunderbird works like it should. I just cant get ntlm with outlook 2010 to work for sso. I get prompted for my password each time I open outlook. I have attached my config for dovecot. Any help would be much appreciated. # 2.0.19: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-39-virtual x86_64 Ubuntu 12.04.2 LTS auth_debug = yes auth_debug_passwords = yes auth_mechanisms = gssapi ntlm auth_use_winbind = yes auth_verbose = yes auth_verbose_passwords = plain debug_log_path = /var/log/dovecot_debug.log log_path = /var/log/dovecot.log mail_location = mdbox:~/mdbox passdb { driver = pam } plugin { quota_rule = *:storage=2G quota_warning = storage=95%% quota-warning 95 %u } protocols = " imap" service auth-worker { user = root } service auth { user = root } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } protocol imap { mail_plugins = " quota imap_quota" }

2 2

[Dovecot] Antispam r49 breaks Dovecot v2.1
by Steffen Kaiser 30 Apr '13

30 Apr '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Dear Eugene, patch 49 breaks compilation with Dovecot v2.1. Attached patch encloses the change in a #if. To feed the #if the actual Dovecot version, I've introduced an extra variable in extra.mk, but I cannot help with making the GNU configure stuff doing it right away. There will be numerous other ways to get the Dovecot version into the source ... . Maybe, Timo would add a binary version of the Dovecot version in its config.h ? In order to be able to built version-aware plugins. Regards, - -- Steffen Kaiser -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQEVAwUBUNLvT2oxLS8a3A9mAQIzfwgAvf7zcN9RwKD/kTmFkfx5djKd5H0dRXt8 423csD3bCU6qcOtR2MHR0ApNp07aXK84MPgIazbne41Iekqk0daoOhnPoc0mHy8u kj9EYFGVlQTKa2vcSUEu8Phddc/YHvzQba9m2Dg9P4STuJ6EcRqkhvufspERGphF Y+IY20BQc9/Flu8TIxtt6pSiIioq0WWntCGnyPP9BX90JYYO+5zAm5FnG4GH4Q0Z 44dZSKM7iP0/nMhmsraX/5alxy0mvx3ZfhO/Ktx/wd92WmLROAlicBClIZC9XCH2 6HD/ryr73DrEeEZdmwHcnmZrtWc++EJcAetfv45Fov8XagUtFJ0D4A== =G+d/ -----END PGP SIGNATURE-----

2 1

[Dovecot] Dovecot has no understandable configuration any more
by forum 30 Apr '13

30 Apr '13

Hello, my last problem could be solved now with userdb { driver = static args = uid=mail gid=mail home=/srv/mail/%d/%n } I can connect to dovecot locally with an webmailer. But there is no listener process to be seen outside of the server? Locally this ports are working, but not outside: # netstat -tulpn | grep dove tcp6 0 0 :::110 :::* LISTEN 5741/dovecot tcp6 0 0 :::143 :::* LISTEN 5741/dovecot tcp6 0 0 :::993 :::* LISTEN 5741/dovecot tcp6 0 0 :::995 :::* LISTEN 5741/dovecot Is this a configuration problem inside dovecot? Another problem is the migration from the existant emails from V1 to V2: In the log i can find: Apr 30 11:14:57 imap(xxxx@yyyy): Error: Broken file /srv/mail/yyyy/xxxx/.INBOX.dir.09/dovecot-uidlist line 1: Broken header (uidvalidity = 0, next_uid=697) How can i recover this? Delete all the index files? Has someone an idea how to migrate the emails from charset ISO8859-1 to UTF-8? Best regards Karsten

2 1

[Dovecot] Dovecot Antispam Plugin is not working
by Ravi Kanchan 30 Apr '13

30 Apr '13

Hi All, I am using dovecot version 2.0.9 DSPAM Anti-Spam Suite 3.10.2 (agent/library) ClamAV 0.97.7/17102 and dspam antispam plugin dovecot-antispam-plugin-43880985e3dd and plugin configuration is given below: protocol imap { mail_plugins = " antispam autocreate" } protocol pop3 { mail_plugins = antispam autocreate } plugin { antispam_allow_append_to_spam = YES antispam_backend = dspam antispam_crm_args = --config=/home/vmail antispam_dspam_args = --client;--user vmail antispam_dspam_binary = /usr/bin/dspam antispam_dspam_notspam = --class=innocent antispam_dspam_result_header = X-DSPAM-Result antispam_dspam_spam = --class=spam antispam_mail_tmpdir = /tmp antispam_signature = X-DSPAM-Signature antispam_signature_missing = error antispam_spam = Spam } dspam bin path: [root@sogo ~]# which dspam /usr/bin/dspam and dspam.conf has attached with this mail. but my dspam plugin configuration is not working. and also I am not getting any log from dspam. My dspam server is working prefect. but I guess plugin is not working properly can anyone helpme. and my configuration for this is following:Regard's Ravi Kanchan Sharma Sr. System Administrator Infinite Computer Solutions (I) Ltd. Bglr. Mo. 9997154666

1 0

[Dovecot] help with LMTP setup
by jeep＠rahul.net 30 Apr '13

30 Apr '13

Im trying to convert my dovecot-lda setup to use LMTP for better security. My setup is postfix + dovecot + mysql with virtual users. Im setting up dovecot 2.2.1 w/postfix 2.10.0 Im still learning dovecot so Im not totally sure where Im going wrong. Can someone point out why Im getting permission problems? Im also concerned with server security, so if you notice anything that should be better, please point that out. I am the only user on this Linux box. Thank you! ls -l /opt/imapdata/j/jeff/INBOX total 8 drwxr-xr-x 2 vmail vmail 4096 Apr 27 14:21 ./ drwxr-xr-x 3 vmail vmail 4096 Apr 27 14:21 ../ Dovecot is running with the following users: root 20847 0.0 0.0 15572 1108 ? Ss 10:23 0:00 /opt/optdovecot/sbin/dovecot dovenull 20848 0.0 0.0 46752 2724 ? S 10:23 0:00 dovecot/imap-login dovenull 20849 0.0 0.0 46752 2720 ? S 10:23 0:00 dovecot/imap-login vmail 20850 0.0 0.0 13408 1068 ? S 10:23 0:00 dovecot/anvil root 20851 0.0 0.0 13540 1192 ? S 10:23 0:00 dovecot/log root 20853 0.0 0.0 16504 2128 ? S 10:23 0:00 dovecot/config vmail 20854 0.0 0.0 136448 2972 ? S 10:23 0:00 dovecot/auth Im getting the following when an email comes in: Apr 29 10:11:57 fed8 postfix/virtual[20666]: D88F3DF3BD: to=<jeff(a)mydomain.com>, relay=virtual, delay=370, delays=370/0.03/0/0.07, dsn=4.2.0, status=deferred (delivery failed to mailbox ///opt/imapdata/j/jeff/INBOX/inbox: unable to create lock file ///opt/imapdata/j/jeff/INBOX/inbox.lock: Permission denied) my postfix/master.cf entry: dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/opt/dovecot/libexec/dovecot/lmtp -f ${sender} -d ${recipient} doveconf -n: # 2.2.1: /opt/dovecot221/etc/dovecot/dovecot.conf # OS: Linux 3.8.5-201.fc18.x86_64 x86_64 Fedora release 18 (Spherical Cow) auth_debug = yes auth_debug_passwords = yes auth_verbose = yes auth_verbose_passwords = plain default_internal_user = vmail first_valid_gid = 2000 first_valid_uid = 2000 listen = * lock_method = flock login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c mail_debug = yes mail_gid = vmail mail_privileged_group = vmail mail_uid = vmail mbox_lock_timeout = 1 mins mbox_write_locks = fcntl passdb { args = /opt/dovecot/etc/dovecot/conf.d/dovecot-sql.conf.ext driver = sql } plugin { mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size } postmaster_address = jeff(a)otherdomain.com protocols = imap lmtp sendmail_path = /usr/lib/sendmail service auth { inet_listener { port = 12345 } unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { mode = 0660 user = vmail } user = $default_internal_user } service imap-login { inet_listener imaps { port = 993 ssl = yes } process_min_avail = 2 service_count = 1 vsz_limit = 64 M } service lmtp { executable = lmtp -L inet_listener lmtp { address = 192.168.1.22 127.0.0.1 port = 24 } unix_listener lmtp { mode = 0666 } user = vmail } ssl = required ssl_cert = </opt/dovecot/etc/dovecot/conf.d/ssl/certs/dovecot.pem ssl_cipher_list = ALL:!LOW:!MEDIUM:!SSLv1:!SSLv2:!MD5:!SSL1:!SSL2:!EXP-ADH-DES-CBC-SHA:!EXP-EDH-RSA-DES-CBC-SHA:!EXP-DES-CBC-SHA:!EXP-EDH-RSA-DES-CBC-SHA:!EXP-ADH-DES-CBC-SHA:!EXP-DES-CBC-SHA:!ADH-AES256-SHA:!ADH-AES128-SHA:!ADH-DES-CBC3-SHA:!EXP-ADH-DES-CBC-SHA:!EXP-ADH-DES-CBC-SHA:!ADH-DES-CBC3-SHA:TLSv1 ssl_key = </opt/dovecot/etc/dovecot/conf.d/ssl/private/dovecot.pem userdb { args = uid=vmail gid=vmail home=/opt/imapdata/%1n/%n driver = static } userdb { args = /opt/dovecot/etc/dovecot/conf.d/dovecot-sql.conf.ext driver = sql } userdb { args = /opt/dovecot/etc/dovecot/conf.d/dovecot-sql.conf.ext driver = sql } verbose_ssl = yes protocol lmtp { info_log_path = /var/log/dovelmtp.log mail_plugins = " sieve" } protocol lda { info_log_path = /var/log/doveinfo.log log_path = /var/log/dovelda.log } protocol imap { imap_idle_notify_interval = 1 mins imap_max_line_length = 64 k mail_max_userip_connections = 5 } /mf/home/jeep/shell/.signature

2 4

[Dovecot] last login timestamp
by Oscar A. Jara 30 Apr '13

30 Apr '13

Hello, I am settiing up a dovecot (imap, pop, sieve, lda) + openldap infrastructure. I need to store the timestamp of the last login of each user in an attribute of its corresponding ldap object. I could not find a way of doing this through configuration options so I am thinking of coding this task into the dovecot-auth source code, maybe in the passdb-ldap.c file. What do you recomend about this? Thanks. __________ Information from ESET Mail Security, version of virus signature database 8278 (20130429) __________ The message was checked by ESET Mail Security. http://www.eset.com

6 9

[Dovecot] mailbox_list_index_parse_header crash
by Kyle Wheeler 29 Apr '13

29 Apr '13

Hi, I got all excited about IMAP NOTIFY support and tried enabling mailbox_list_index on my server. Unfortunately, I rather quickly ran into trouble of the segfault variety. This prevented me from doing basic things like seeing the contents of some of my folders. Disabling mailbox_list_index got me back up and running, but... darnit, that's annoying. The only message I got in my log file was this: imap(user@domain): Fatal: master: service(imap): child 6899 killed with signal 11 (core dumped) If I can help track this down, please let me know. Here's the backtrace: #0 hash_table_insert_node (table=0x10eff60, key=0x103, value=0x10fd8b0, check_existing=<value optimized out>) at hash.c:268 node = 0x69616d2d746e6573 prev = 0x10fbee0 hash = <value optimized out> __FUNCTION__ = "hash_table_insert_node" #1 0x00007fad738a11be in hash_table_insert (table=0x10eff60, key=0x1, value=0x101) at hash.c:285 node = 0x0 #2 0x00007fad73b81e68 in mailbox_list_index_parse_header (list=<value optimized out>, view=0x11095f0, force=<value optimized out>) at mailbox-list-index.c:196 data = 0x10f5f30 i = 4980 len = 1 size = 8192 id = 1 #3 mailbox_list_index_parse (list=<value optimized out>, view=0x11095f0, force=<value optimized out>) at mailbox-list-index.c:317 ilist = 0x10edc80 hdr = <value optimized out> error = 0x10f5820 "`▒\016\001" __FUNCTION__ = "mailbox_list_index_parse" #4 0x00007fad73b86b03 in mailbox_list_index_sync_begin (list=0x10ed890, sync_ctx_r=0x7fff2ad61ee0) at mailbox-list-index-sync.c:247 ilist = 0x10edc80 sync_ctx = <value optimized out> index_sync_ctx = <value optimized out> view = 0x11095f0 trans = <value optimized out> hdr = <value optimized out> #5 0x00007fad73b86ffb in mailbox_list_index_sync (list=0x10eff60) at mailbox-list-index-sync.c:382 sync_ctx = 0x1107300 ret = <value optimized out> #6 0x00007fad73b8233f in mailbox_list_index_refresh (list=0x10ed890) at mailbox-list-index.c:376 ilist = 0x10edc80 view = 0x1107300 ret = <value optimized out> #7 0x00007fad73b85e19 in index_list_update_mailbox (box=0x10f40a0) at mailbox-list-index-status.c:363 list_sync_ctx = 0x1107140 list_view = <value optimized out> list_trans = <value optimized out> changes = {status = {messages = 718675880, recent = 32767, unseen = 4294967295, uidvalidity = 0, uidnext = 68, first_unseen_seq = 0, first_recent_uid = 1, last_cached_seq = 0, highest_modseq = 3176264, highest_pvt_modseq = 17854784, keywords = 0x10f40a0, permanent_flags = 17778368, permanent_keywords = 0, allow_new_keywords = 0, nonpermanent_modseqs = 0, have_guids = 0}, guid = "p ▒*▒\177\000\000D\000\000\000\000\000\000", seq = 17750944, rec_changed = false, msgs_changed = false, hmodseq_changed = false} __FUNCTION__ = "index_list_update_mailbox" #8 0x00007fad73b86089 in index_list_sync_deinit (ctx=0x1107140, status_r=0x7fff2ad62070) at mailbox-list-index-status.c:470 box = 0x10f40a0 #9 0x00007fad73b70f4a in mailbox_sync_deinit (_ctx=0x0, status_r=0x1) at mail-storage.c:1655 ctx = 0x10eff60 box = 0x10f40a0 errormsg = <value optimized out> error = <value optimized out> ret = <value optimized out> #10 0x00007fad73b7100b in mailbox_sync (box=<value optimized out>, flags=<value optimized out>) at mail-storage.c:1681 ctx = 0x0 status = {sync_delayed_expunges = 0} #11 0x00007fad73b9af72 in index_storage_get_status (box=0x10f40a0, items=17, status_r=<value optimized out>) at index-status.c:39 No locals. #12 0x00007fad72cabde4 in fts_mailbox_get_status (box=0x10f40a0, items=17, status_r=0x7fff2ad621b0) at fts-storage.c:86 seq = <value optimized out> #13 0x00007fad73b864e6 in index_list_get_status (box=0x10f40a0, items=17, status_r=0x7fff2ad621b0) at mailbox-list-index-status.c:162 No locals. #14 0x000000000041c8da in imap_status_get (cmd=0x10f1880, ns=0x10e8b00, mailbox=0x10cc2c8 "Flight.RV", items=0x7fff2ad62240, result_r=0x7fff2ad621b0) at imap-status.c:84 client = 0x10f0ce0 box = 0x10f40a0 errstr = <value optimized out> ret = <value optimized out> #15 0x000000000041219d in cmd_status (cmd=0x10f1880) at cmd-status.c:40 client = 0x10f0ce0 args = 0x10d7a38 list_args = 0x10d7be0 items = {status = 17, metadata = 0} result = {status = {messages = 0, recent = 0, unseen = 0, uidvalidity = 0, uidnext = 0, first_unseen_seq = 0, first_recent_uid = 0, last_cached_seq = 0, highest_modseq = 0, highest_pvt_modseq = 0, keywords = 0x0, permanent_flags = 0, permanent_keywords = 0, allow_new_keywords = 0, nonpermanent_modseqs = 0, have_guids = 1}, metadata = {guid = "PY\r\001", '\000' <repeats 11 times>, virtual_size = 17651520, cache_fields = 0x7fad73836e40, precache_fields = 1934521552, backend_ns_prefix = 0x7fad74012000 "", backend_ns_type = 1080}, error = 4294967295, errstr = 0xffffffffffffffa8 <Address 0xffffffffffffffa8 out of bounds>} ns = <value optimized out> mailbox = 0x10cc2c8 "Flight.RV" orig_mailbox = 0x10d7b98 "Flight.RV" #16 0x00000000004160ad in command_exec (cmd=0x10f1880) at imap-commands.c:156 hook = 0x10d5d90 ret = <value optimized out> #17 0x0000000000415200 in client_command_input (cmd=0x10f1880) at imap-client.c:775 client = 0x10f0ce0 command = <value optimized out> __FUNCTION__ = "client_command_input" #18 0x00000000004152ed in client_command_input (cmd=0x10f1880) at imap-client.c:836 client = 0x10f0ce0 command = 0x0 __FUNCTION__ = "client_command_input" #19 0x000000000041556d in client_handle_next_command (client=0x10f0ce0) at imap-client.c:874 No locals. #20 client_handle_input (client=0x10f0ce0) at imap-client.c:886 _data_stack_cur_id = 3 ret = 208 remove_io = <value optimized out> handled_commands = false __FUNCTION__ = "client_handle_input" #21 0x00000000004158ef in client_input (client=0x10f0ce0) at imap-client.c:928 cmd = <value optimized out> output = 0x10f16d8 bytes = <value optimized out> __FUNCTION__ = "client_input" #22 0x00007fad738abdf6 in io_loop_call_io (io=0x10f1780) at ioloop.c:387 ioloop = 0x10d4720 t_id = 2 #23 0x00007fad738ace6f in io_loop_handler_run (ioloop=<value optimized out>) at ioloop-epoll.c:215 ctx = 0x10d4aa0 event = 0x10d4b10 list = 0x10f17d0 io = 0x10eff60 tv = {tv_sec = 1799, tv_usec = 999580} msecs = <value optimized out> ret = 1 i = 0 call = false __FUNCTION__ = "io_loop_handler_run" #24 0x00007fad738abd98 in io_loop_run (ioloop=0x10d4720) at ioloop.c:406 No locals. #25 0x00007fad738621b3 in master_service_run (service=0x10d45b0, callback=0x1) at master-service.c:560 No locals. #26 0x000000000041eb67 in main (argc=1, argv=0x10d4390) at main.c:400 set_roots = {0x426200, 0x0} login_set = {auth_socket_path = 0x10cc050 "(", postlogin_socket_path = 0x0, postlogin_timeout_secs = 60, callback = 0x41ed60 <login_client_connected>, failure_callback = 0x41ed00 <login_client_failed>, request_auth_token = 1} service_flags = <value optimized out> storage_service_flags = MAIL_STORAGE_SERVICE_FLAG_DISALLOW_ROOT username = 0x0 c = <value optimized out> ~Kyle -- For every complex problem, there is a solution that is simple, neat, and wrong. -- H. L. Mencken

2 4

[Dovecot] Dovecot 2.1.16 doveadm purge -A segfault
by Daniel Parthey 29 Apr '13

29 Apr '13

Hi, I know that a lot of work has been done regarding doveadm server, but I'm still experiencing easily reproducible segfault crashes of doveadm-server with 2.1.16 when running the following command in a 4 node director/mailbox cluster: /usr/bin/doveadm -c /etc/dovecot-director/dovecot-director.conf -D purge -A The dovecot-error.log shows the following errors (addresses anonymized): Apr 29 15:45:14 10.129.3.233 dovecot: doveadm: Error: purge: invalid option -- '' Apr 29 15:45:14 10.129.3.233 dovecot: doveadm(x.xxxxxx(a)xxx-xxxxxx.xx): Error: doveadm purge: Client sent unknown parameter: ? Apr 29 15:45:14 10.129.3.233 dovecot: doveadm: Error: purge: invalid option -- '�' Apr 29 15:45:14 10.129.3.233 dovecot: doveadm(x.xxxxxx(a)xxx-xxxxxx.xx): Error: doveadm purge: Client sent unknown parameter: ? Apr 29 15:45:14 10.129.3.249 dovecot: doveadm: Error: purge: invalid option -- '�' Apr 29 15:45:14 10.129.3.249 dovecot: doveadm(x.xxxxxx(a)xxx-xxxxxx.xx): Error: doveadm purge: Client sent unknown parameter: ? Apr 29 15:45:14 10.129.3.249 dovecot: doveadm: Error: purge: invalid option -- 'r' Apr 29 15:45:14 10.129.3.249 dovecot: doveadm(x.xxxxxx(a)xxx-xxxxxx.xx): Error: doveadm purge: Client sent unknown parameter: ? Apr 29 15:45:14 10.129.3.213 dovecot: doveadm: Error: purge: invalid option -- 'e' Apr 29 15:45:14 10.129.3.213 dovecot: doveadm(xxxxx(a)xxxxxx.xx): Error: doveadm purge: Client sent unknown parameter: ? Apr 29 15:45:14 10.129.3.213 dovecot: doveadm: Error: purge: invalid option -- 'g' Apr 29 15:45:14 10.129.3.213 dovecot: doveadm(xxxxx(a)xxxxxx.xx): Error: doveadm purge: Client sent unknown parameter: ? Apr 29 15:45:14 10.129.3.213 dovecot: doveadm: Error: purge: invalid option -- 'e' Apr 29 15:45:14 10.129.3.213 dovecot: doveadm(xxxxx(a)xxxxxx.xx): Error: doveadm purge: Client sent unknown parameter: ? Apr 29 15:45:14 10.129.3.213 dovecot: doveadm: Error: purge: invalid option -- '-' Apr 29 15:45:14 10.129.3.213 dovecot: doveadm(xxxxx(a)xxxxxx.xx): Error: doveadm purge: Client sent unknown parameter: ? Apr 29 15:45:14 10.129.3.249 dovecot: doveadm: Error: purge: invalid option -- '' Apr 29 15:45:14 10.129.3.249 dovecot: doveadm(xxxxxxxxxx(a)xxxxxxxxxx.xx): Error: doveadm purge: Client sent unknown parameter: ? Apr 29 15:45:14 10.129.3.213 dovecot: doveadm(xxxxx(a)xxxxxx.xx): Fatal: master: service(doveadm): child 6316 killed with signal 11 (core dumped) There seems to something wrong with the doveadm command parser: # gdb /usr/lib/dovecot/doveadm-server /var/tmp/6316 (gdb) bt full #0 0x00007f52f0dc7cca in ?? () from /lib/libc.so.6 No symbol table info available. #1 0x00007f52f0dc8dab in ?? () from /lib/libc.so.6 No symbol table info available. #2 0x00007f52f0dc8e18 in getopt () from /lib/libc.so.6 No symbol table info available. #3 0x00000000004138ce in doveadm_mail_cmd_server_parse (conn=0xe09ad0) at client-connection.c:69 getopt_args = 0xdfa6b8 "AS:u:" c = <value optimized out> cmd = 0xe062c8 add_username_header = false #4 client_handle_command (conn=0xe09ad0) at client-connection.c:223 ctx = 0xe0dae0 flags = <value optimized out> cmd_name = <value optimized out> input = {module = 0x0, service = 0x4210f0 "doveadm", username = 0xdfa59a "xxxxxxx(a)xxxxxxxx.xx", session_id = 0x0, local_ip = {family = 0, u = {ip6 = {__in6_u = {__u6_addr8 = '\000' <repeats 15 times>, __u6_addr16 = {0, 0, 0, 0, 0, 0, 0, 0}, __u6_addr32 = {0, 0, 0, 0}}}, ip4 = {s_addr = 0}}}, remote_ip = {family = 0, u = {ip6 = {__in6_u = {__u6_addr8 = '\000' <repeats 15 times>, __u6_addr16 = {0, 0, 0, 0, 0, 0, 0, 0}, __u6_addr32 = {0, 0, 0, 0}}}, ip4 = {s_addr = 0}}}, local_port = 0, remote_port = 0, userdb_fields = 0x0, flags_override_add = 0, flags_override_remove = 0, no_userdb_lookup = 0} argc = <value optimized out> #5 client_connection_input (conn=0xe09ad0) at client-connection.c:326 args = <value optimized out> _data_stack_cur_id = 3 line = <value optimized out> ok = <value optimized out> #6 0x00007f52f10e6166 in io_loop_call_io (io=0xe097e0) at ioloop.c:379 ioloop = 0xe026a0 t_id = 2 #7 0x00007f52f10e71ef in io_loop_handler_run (ioloop=<value optimized out>) at ioloop-epoll.c:213 ctx = 0xe054f0 event = 0xe05560 list = 0xe09950 io = 0xdfa5c8 tv = {tv_sec = 2147483, tv_usec = 0} msecs = <value optimized out> ret = <value optimized out> i = 0 call = false #8 0x00007f52f10e6108 in io_loop_run (ioloop=0xe026a0) at ioloop.c:398 No locals. #9 0x00007f52f10d15a3 in master_service_run (service=0xe02550, callback=0) at master-service.c:544 No locals. #10 0x0000000000414111 in main (argc=1, argv=0xe02370) at main.c:90 set_roots = {0x422780, 0x0} error = 0x0 Regards Daniel -- https://plus.google.com/103021802792276734820

1 0

[Dovecot] Dovecot Solr Panic
by Andre Rodier 29 Apr '13

29 Apr '13

Hello Everyone, I have a small base of users (30), but a lot of emails. I have an error again when I am indexing a virtual folder with a large number of folders. I appreciate this is a special case, but I am using dovecot and solr as it is, according to the documentation, the favourite way. One user is using a large number of archives sub folders, by years, months and subfolders, since 5 years. I am convincing this user to give up this organisation, but in the mean time, I hope to solve this problem. The virtual folder, called Archives, references all the sub folders in the Archive folder. There is about 380 folders, and worst of all, 55k characters with their names concatenated. On solr, I have increased the value of headerBufferSize to a huge value, but I have still this error. Anyway, this is the error I have when I try to index this virtual folder: ---8<--------------------------------------------------------------------------------------------------------------------------------------- root@lapetus:/mnt/emails/indiefield.co.uk/jsmith/Mails/Virtual# doveadm -v index -u 'john smith' 'Search/Archives' doveadm(john smith): Info: Search/Archives: Caching mails seq=109580..127362 1800/17783doveadm(john smith): Panic: file solr-connection.c: line 416 (solr_connection_select): assertion failed: (!conn->posting) doveadm(john smith): Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(+0x4414a) [0x7fcb7b5b014a] -> /usr/lib/dovecot/libdovecot.so.0(default_fatal_handler+0x2a) [0x7fcb7b5b020a] -> /usr/lib/dovecot/libdovecot.so.0(i_fatal+0) [0x7fcb7b58782a] -> /usr/lib/dovecot/modules/lib21_fts_solr_plugin.so(+0x754a) [0x7fcb790fa54a] -> /usr/lib/dovecot/modules/lib21_fts_solr_plugin.so(+0x4037) [0x7fcb790f7037] -> /usr/lib/dovecot/modules/lib20_fts_plugin.so(fts_backend_get_last_uid+0x5a) [0x7fcb79b2f66a] -> /usr/lib/dovecot/modules/lib20_fts_plugin.so(+0xc1fd) [0x7fcb79b341fd] -> /usr/lib/dovecot/modules/lib20_fts_plugin.so(+0xc689) [0x7fcb79b34689] -> /usr/lib/dovecot/modules/lib20_fts_plugin.so(+0xc51e) [0x7fcb79b3451e] -> doveadm(+0x16719) [0x7fcb7bf71719] -> doveadm(+0x13346) [0x7fcb7bf6e346] -> doveadm(+0x13e21) [0x7fcb7bf6ee21] -> doveadm(doveadm_mail_try_run+0x161) [0x7fcb7bf6f2e1] -> doveadm(main+0x3d1) [0x7fcb7bf6def1] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xfd) [0x7fcb7b200ead] -> doveadm(+0x13125) [0x7fcb7bf6e125] Aborted ---8<--------------------------------------------------------------------------------------------------------------------------------------- On the solr side: ---8<--------------------------------------------------------------------------------------------------------------------------------------- 28-Apr-2013 17:13:33 org.apache.solr.update.processor.LogUpdateProcessor finish INFO: {add=[1/70af772eafc17c51fb350000812a8a77/john smith(a)indiefield.co.uk, 2/70af772eafc17c51fb350000812a8a77/john smith(a)indiefield.co.uk, 3/70af772eafc17c51fb350000812a8a 77/john smith(a)indiefield.co.uk, 4/70af772eafc17c51fb350000812a8a77/john smith(a)indiefield.co.uk, 5/70af772eafc17c51fb350000812a8a77/john smith(a)indiefield.co.uk, 6/70af772ea fc17c51fb350000812a8a77/john smith(a)indiefield.co.uk, 7/70af772eafc17c51fb350000812a8a77/john smith(a)indiefield.co.uk, 8/70af772eafc17c51fb350000812a8a77/john smith@indiefie ld.co.uk, ... (8 added)]} 0 19141 28-Apr-2013 17:13:33 org.apache.solr.common.SolrException log SEVERE: org.apache.solr.common.SolrException: ParseError at [row,col]:[1188418,131] Message: Premature end of file. at org.apache.solr.handler.XMLLoader.load(XMLLoader.java:72) at org.apache.solr.handler.ContentStreamHandlerBase.handleRequestBody(ContentStreamHandlerBase.java:54) at org.apache.solr.handler.RequestHandlerBase.handleRequest(RequestHandlerBase.java:131) at org.apache.solr.core.SolrCore.execute(SolrCore.java:1317) at org.apache.solr.servlet.SolrDispatchFilter.execute(SolrDispatchFilter.java:338) at org.apache.solr.servlet.SolrDispatchFilter.doFilter(SolrDispatchFilter.java:241) at org.mortbay.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1157) at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:388) at org.mortbay.jetty.security.SecurityHandler.handle(SecurityHandler.java:216) at org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:182) at org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:766) at org.mortbay.jetty.webapp.WebAppContext.handle(WebAppContext.java:418) at org.mortbay.jetty.handler.ContextHandlerCollection.handle(ContextHandlerCollection.java:230) at org.mortbay.jetty.handler.HandlerCollection.handle(HandlerCollection.java:114) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152) at org.mortbay.jetty.Server.handle(Server.java:326) at org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:542) at org.mortbay.jetty.HttpConnection$RequestHandler.content(HttpConnection.java:943) at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:843) at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:218) at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:404) at org.mortbay.io.nio.SelectChannelEndPoint.run(SelectChannelEndPoint.java:410) at org.mortbay.thread.QueuedThreadPool$PoolThread.run(QueuedThreadPool.java:582) Caused by: javax.xml.stream.XMLStreamException: ParseError at [row,col]:[1188418,131] Message: Premature end of file. at com.sun.org.apache.xerces.internal.impl.XMLStreamReaderImpl.next(XMLStreamReaderImpl.java:592) at org.apache.solr.handler.XMLLoader.readDoc(XMLLoader.java:273) at org.apache.solr.handler.XMLLoader.processUpdate(XMLLoader.java:138) at org.apache.solr.handler.XMLLoader.load(XMLLoader.java:69) ... 22 more ---8<--------------------------------------------------------------------------------------------------------------------------------------- Kind regards, Andre Rodier

3 3

[Dovecot] dovecot-sql.conf - Unknown setting: driver
by jeep＠rahul.net 27 Apr '13

27 Apr '13

Im upgrading my dovecot from 2.1.14 to dovecot 2.2.1 on linux. Im using the same configuration file against my MySQL db and getting the following error: doveconf -n # 2.2.1: /opt/dovecot221/etc/dovecot/dovecot.conf doveconf: Fatal: Error in configuration file /opt/dovecot221/etc/dovecot/conf.d/dovecot-sql.conf line 2: Unknown setting: driver dovecot-sql.conf: # The mysqld.sock socket may be in different locations in different systems driver = mysql # Use "host= ... pass=foo#bar" if your password has '#' character connect = host=/var/run/mysqld/mysqld.sock dbname=mydb user=username password=pass password_query = SELECT userid AS username, domain, password \ FROM users WHERE userid = '%n' AND domain = '%d' user_query = SELECT home, uid, gid FROM users WHERE userid = '%n' AND domain = '%d' home=/opt/ii/%1n/%n/INBOX # For using doveadm -A: iterate_query = SELECT userid AS username, domain FROM users That file worked fine in the last version. Looking at the docs 'driver' is still a valid setting. Can someone help me figure out why its complaining? Ive even Im lost as to why this error is occuring unless the error itself is actually another problem and the wrong error is popping up. Been working on this for a day and cant figure it out. Thanks in advance! /mf/home/jeep/shell/.signature

2 3

[Dovecot] Replication fails with "Remote dsync doesn't use compatible protocol"
by Rich Wales 27 Apr '13

27 Apr '13

I can't get replication to work in Dovecot 2.2.1. I'm getting the following error on the machine where I'm initiating the replication: richatwork dovecot: doveadm: Error: dsync-remote(richatwork): Error: dsync(local): Remote dsync doesn't use compatible protocol Both the local and remote servers are running identical versions of Dovecot (2.2.1), so I don't understand why I would be having any sort of "compatible protocol" problem. Any ideas? I posted the "dovecot -n" output for both servers in my earlier e-mail on this issue, which I sent about 24 hours ago (and which I assume was too long for people to be willing to read). Rich Wales richw(a)richw.org

1 1

[Dovecot] ios clients and namespace trouble
by Kelsey Cummings 27 Apr '13

27 Apr '13

We migrated to dovecot from courier and maintained a courier compatible namespace configuration. This resulted in ios clients needing to be manually configured in order to use the special folders correctly (delete messages, save drafts, etc) either by being given the correct "Path Prefix" or by manually selecting the special folders. I can't fathom why apple has chosen not to support or can't detect namespace correctly and require manual configuration but if they haven't done it by now they must have some reason for it and aren't going to fix it any time soon. Are there any creative solutions to fixing the i-clients and preventing them from needing manual configuration? -K

2 3

[Dovecot] .dovecot.sieve/tmp)failed: Not a directory
by JC Putter 25 Apr '13

25 Apr '13

stat(/var/spool/vmail/example.com/user/.dovecot.sieve/tmp)failed: Not a directory auth_mechanisms = plain login disable_plaintext_auth = no first_valid_uid = 2000 last_valid_uid = 2000 mail_gid = 2000 mail_location = maildir:/var/spool/vmail/%d/%n mail_uid = 2000 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date mbox_write_locks = fcntl passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } service auth { unix_listener auth-userdb { group = vmail mode = 0600 user = vmail } } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } According to the Wiki "It is not wise to place this link inside your mail store, as it may be mistaken for a mail folder. Inside a maildir for instance, the default .dovecot.sieve would show up as phantom folder */dovecot/sieve* in your IMAP tree." Sorry i am a bit of a noob, the docs don't explain clearly what to do...

3 2

[Dovecot] Replication -- multiple users, three or more servers?
by Rich Wales 24 Apr '13

24 Apr '13

I'm running Dovecot 2.2.1 on an Ubuntu 12.04.2 server, with half a dozen accounts for various family members. I want to set up replication involving at least three Ubuntu servers, with different users replicated on different sets of servers. For example, I might have mail for "user1" replicated on "server1", "server2", and "server3"... while mail for "user2" would be on "server1" and "server2"... and mail for "user3" would be on "server1" and "server3". I've read the wiki page (http://wiki2.dovecot.org/Replication) but I'm still confused. I'd love to see an example that clearly shows how to set up specific individual mail users to be replicated on a different set of servers for each user, like what I described above. Rich Wales richw(a)richw.org

2 3

[Dovecot] login crashes - maybe too many simultan connections
by Frank Leonhardt 24 Apr '13

24 Apr '13

Hallo, since a few days, users sometimes have problems connecting to our mailserver, in the mail.err are many lines like this: Apr 23 11:14:25 psy2 dovecot: dovecot: child 17607 (login) killed with signal 11 (core dumps disabled) (ip=xx.xx.146.84) Users who are already logged in keep connected, but new connections are not possible.This happens only between 10 am and 3 pm, never in the early morning or at night, so i assume, maybe this is caused by too many simultaneous connections? After restarting dovecot the problem is temporary solved, new users may connect, but after one or a few days, this may happen again. # 1.2.15: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.1 log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_privileged_group: alle mail_location: maildir:~/Maildir fsync_disable: yes mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 auth default: passdb: driver: pam args: dovecot userdb: driver: passwd May anybody help? Thanks in advance! Greetings from Frank.

2 1

[Dovecot] Strange issue with doveadm user
by Antoine Nguyen 24 Apr '13

24 Apr '13

Dear all, I encounter a strange issue with the *doveadm user* command. (dovecot 2.1.16) I try to retrieve information about a specific user but dovecot says it doesn't exist (whereas I just created it). The following command fails: $ sudo -u vmail doveadm user pouet(a)domain.tld userdb lookup: user pouet(a)domain.tld doesn't exist If I try a more global lookup, the user is properly found: $ sudo -u vmail doveadm user *(a)domain.tld user1(a)domain.tld *pouet(a)domain.tld* Sending a query for another user works well. For example : $ sudo -u vmail doveadm user user1(a)domain.tld userdb: user1(a)domain.tld home : /var/vmail/domain.tld/user1 uid : 500 gid : 500 quota_rule: *:bytes=100M I really don't understand what's happening... The only difference I see between the users is that user1 was created when I was using dovecot 1.2... Thanks for your help.

1 1

Re: [Dovecot] Using dsync to export mail to remote IMAP account
by Joseph Tam 24 Apr '13

24 Apr '13

Timo Sirainen writes: >> I've read the web/man pages on dsync, but it's not clear to me whether >> dsync can be used to export (rather than import) a user's mailbox to a >> remote non-dovecot IMAP account. > > It should be possible at some point, but currently probably won't work > very well. Ah, thanks for the clarification. >> dsync(localuser): Error: user localuser: Initialization failed: >> Namespace '': Unknown mail storage driver imapc >> dsync(localuser): Fatal: User init failed > > But this looks like you simply haven't compiled Dovecot with imapc > support. See if > > dovecot --build-options|grep storage > > returns imapc. Right you are. Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] Feature request: Configure CONFIG_MODULE_DIR and AUTH_MODULE_DIR at runtime
by Rickard Nilsson 23 Apr '13

23 Apr '13

Hi! I am running dovecot 2.1.16 on NixOS (http://nixos.org) and I have been fighting the dynamically loaded dovecot modules/plugins a bit. The problem is that in Nix/NixOS all packages are completely isolated from each other (each package has a separate /lib, /libexec, /bin etc, with only its own files in it). So dovecot has all its modules under /nix/store/xxx-dovecot/{lib,libexec}/dovecot, and the Pigeonhole modules are under /nix/store/yyy-pidgeonhole/{lib,libexec}/dovecot. Now, dovecot wants to load modules only from one directory, so I created a "virtual" package that unifies all modules in /nix/store/zzz-dovecot-plugins/{lib,libexec}/dovecot. I can then use this directory as the "mail_plugin_dir" setting in dovecot.conf. This works fine, dovecot can then find the "sieve" mail plugin. The problem is the service and auth modules, that dovecot tries to load from the compile-time set MODULE_DIR/{settings,auth}. This is a problem for me, because I can't set the module path during compilation since that introduces a circular dependency between the dovecot package and the virtual dovecot-plugins package. I have solved this by hacking dovecot to read an environment variable, DOVECOT_CONFIG_MODULE_DIR, in the config_parse_load_modules function. This way I can inject my module path during runtime. But this only works for the master process, not the config process which seems to reset its environment (I assume it does this when dropping privileges). So I did another hack which lets me pass an argument to the config process which contains the module path. I can then set this argument in dovecot.conf by "service config { executable = config /my/module/path }". These hacks work, and I can now use both the sieve mail plugin and the sieve service. I have attached the patch, but this is not a request to add it to the source. My hack is a hack because I don't know enough about the inner workings of dovecot to solve it in a good way. Rather, I'm asking for some way to configure the module path in dovecot, either as an argument to the master process or as a setting in dovecot.conf. A bonus would be the ability to specify several paths that dovecot would search, then I can do away with my virtual module package. Best regards, Rickard Nilsson

3 3

[Dovecot] imap Panic: file istream-seekable.c: line 253 (i_stream_seekable_read): assertion failed: (stream->istream.v_offset + stream->pos <= sstream->write_peak)
by Pascal Volk 23 Apr '13

23 Apr '13

Hi Timo, just another crash - using 2.2.1 (c95cea6e1389). Regards, Pascal

2 1

[Dovecot] Running LMTP as a user other than the root user
by Axel Luttgens 23 Apr '13

23 Apr '13

Hello, With this one in Postfix' main.cf: virtual_transport = lmtp:unix:/_ROOT/var/run/dovecot/lmtp and Dovecot settings reproduced at the end of this message, there is no problem for having mail delivered into a user's INBOX. But as soon as I try the security improvement suggested in the docs: service lmtp { user = dovemailer } this is what I get in the logs: postfix/smtpd[52588]: connect from localhost[127.0.0.1] postfix/smtpd[52588]: E86B5BD2BA0: client=localhost[127.0.0.1] postfix/cleanup[52594]: E86B5BD2BA0: message-id=<20130416171203.E86B5BD2BA0(a)ALMba.local> postfix/qmgr[88232]: E86B5BD2BA0: from=<test(a)example.com>, size=315, nrcpt=1 (queue active) dovecot[52568]: lmtp(52596): Debug: none: root=, index=, control=, inbox=, alt= dovecot[52568]: lmtp(52596): Connect from local dovecot[52568]: lmtp(52596): Debug: Loading modules from directory: /_ROOT/dovecot-2.1.16-0.3.4/lib/dovecot dovecot[52568]: lmtp(52596): Debug: Module loaded: /_ROOT/dovecot-2.1.16-0.3.4/lib/dovecot/lib10_quota_plugin.so dovecot[52568]: auth: Error: userdb(test(a)example.com): client doesn't have lookup permissions for this user: userdb reply doesn't contain uid (to bypass this check, set: service auth { unix_listener /_ROOT/var/run/dovecot/auth-userdb { mode=0777 } }) dovecot[52568]: lmtp(52596): Error: user test(a)example.com: Auth USER lookup failed dovecot[52568]: lmtp(52596): Debug: auth input: postfix/lmtp[52595]: E86B5BD2BA0: to=<test(a)example.com>, relay=ALMba.local[/_ROOT/var/run/dovecot/lmtp], delay=19, delays=19/0.02/0.17/0.06, dsn=4.3.0, status=deferred (host ALMba.local[/_ROOT/var/run/dovecot/lmtp] said: 451 4.3.0 <test(a)example.com> Internal error occurred. Refer to server log for more information. (in reply to RCPT TO command)) dovecot[52568]: lmtp(52596): Disconnect from local: Client quit (in reset) postfix/smtpd[52588]: disconnect from localhost[127.0.0.1] and the message of course remains in Postfix' queue. I understand that the +x workaround suggested for the auth-userdb socket (so as to have 0777 permissions instead of 0666) relies on provisions made in Dovecot's code in order to relax some requirements. But I still need help for a correct interpretation... The socket receives 0666 permissions by default; any process should thus be able to read from/write to that socket. So, why set such a default, since it is anyway going to yield un-intuitive results? And, as far as the log messages are concerned: "client doesn't have lookup permissions...". Who's the client here? Still from the log: "client doesn't have lookup permissions for this user:". Which user? "userdb reply doesn't contain uid" The userdb query seems to have failed; but does it mean that is should explicitly return a uid? TIA, Axel $ doveconf -n # 2.1.16: /_ROOT/etc/dovecot/dovecot.conf # OS: Darwin 12.3.0 x86_64 auth_verbose = yes disable_plaintext_auth = no mail_debug = yes mail_gid = dovemailer mail_location = mbox:~/mboxes:INBOX=~/mboxes/inbox mail_uid = dovemailer managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave mbox_write_locks = fcntl passdb { args = /_ROOT/etc/dovecot/db.conf driver = sql } plugin { quota = dirsize:User quota quota_rule = *:storage=1M } ssl = no userdb { driver = prefetch } userdb { args = /_ROOT/etc/dovecot/db.conf driver = sql } protocol lmtp { mail_plugins = quota } protocol pop3 { mail_plugins = quota pop3_uidl_format = %08Xv%08Xu } protocol imap { mail_plugins = quota } With above settings, the permissions on socket auth-userdb are: srw-rw-rw- 1 dovecot wheel 0 16 avr 16:05 auth-userdb and the full config for service lmtp is: $ doveconf service/lmtp service lmtp { chroot = client_limit = 1 drop_priv_before_exec = no executable = lmtp extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = lmtp service_count = 0 type = unix_listener lmtp { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B }

1 1

[Dovecot] Dovecot 2.2.1: typo in src/lib-http/Makefile.in
by Piper Andreas 23 Apr '13

23 Apr '13

Hello, there seems to be a typo in the dovecot-2.2.1-sources: in dovecot-2.2.1/src/lib-http/Makefile.in at line 758 the two lines ../lib-test/libtest.la \ ../lib/liblib.la do not fit into the Makefile-syntax. At compile-time they produce the error make: Fatal error in reader: Makefile, line 725: Unexpected end of line seen If I remove these two lines, everything compiles fine. Could you please check this. Thanks, Andreas -- ________________________________________________________________________ Dr. Andreas Piper, Hochschulrechenzentrum der Philipps-Univ. Marburg Hans-Meerwein-Straße, 35032 Marburg, Germany Phone: +49 6421 28-23521 Fax: -26994 E-Mail: piper(a)HRZ.Uni-Marburg.DE

2 1

[Dovecot] Dovecot 2.1.16: "default_client_count" written to the logs
by Axel Luttgens 23 Apr '13

23 Apr '13

Hello, As to be expected with low system limits, a warning may be written to the logs: master: Warning: fd limit (ulimit -n) is lower than required under max. load (256 < 1000), because of default_client_count Shouldn't it read "default_client_limit" instead of "default_client_count"? It seems that the warning is written only when reloading Dovecot, not upon Dovecot's startup. Is this deliberate? Thanks, Axel

2 2

[Dovecot] Integrate mbox into mdbox
by lutz.niederer＠gmx.net 23 Apr '13

23 Apr '13

Hi! I have several mbox files (unstructured, only the big plain mbox files) and I would like to integrate/read these mbox files into mdbox subfolders of specific users. This is a production system and I don't want to disturb running services and I am a bit afraid of not using the right command and maybe destroying (or whatever) their mailboxes. I am sure it is pretty easy. Can someone please tell me the correct dsync command line that I should use to read each mbox file (one-way) into the specific folder of the mdbox folder structure of a specific user? Thanks a lot, -lutzn

3 4

[Dovecot] Using dsync to export mail to remote IMAP account
by Joseph Tam 23 Apr '13

23 Apr '13

I've read the web/man pages on dsync, but it's not clear to me whether dsync can be used to export (rather than import) a user's mailbox to a remote non-dovecot IMAP account. (The intention is to use it whenever a user leaves and wants to copy their local mail to Google or whatever. I currently use uw-imapd's mailutil -- it works, but it's dreadfully slow.) As a first crack at it, I tried (on the dovecot server) dsync -o imapc_user=remoteuser -o imapc_password=remotepassword -o imapc_host=remote-imap-server -o imapc_port=993 -o imapc_ssl=imaps -o imapc_features=rfc822.size -o imapc_list_prefix=remoteprefix -o mailbox_list_index=no backup -f -u localuser imapc: I got this error: dsync(localuser): Error: user localuser: Initialization failed: Namespace '': Unknown mail storage driver imapc dsync(localuser): Fatal: User init failed Is exporting mail to a remote (non-dovecot) IMAP account even doable with dsync, or am I completely off-track? Joseph Tam <jtam.home(a)gmail.com>

3 2

[Dovecot] Dovecot Failover
by Nikolaos Milas 22 Apr '13

22 Apr '13

Hello, Assuming we have two (low traffic) servers (on different data centers) replicated using dsync, what is the best way to automatically direct users to the main server when it is up and to the redundant one when the main server is down? Using DNS? I've seen that DNS-based failover has generally issues (for example: http://serverfault.com/questions/60553/why-is-dns-failover-not-recommended, which is informative although it refers to web servers). What is the suggested approach? HAProxy? Heartbeat/Pacemaker? Any advice will be appreciated. Thanks and regards, Nick

5 5

[Dovecot] Sieve - BCC
by iliusha 21 Apr '13

21 Apr '13

Hi ! Can you help me please with sieve plugin for dovecot I have this rule: /require ["variables", "envelope", "fileinto", "subaddress", "imap4flags"]; if anyof ( address :is [ "to", "cc", "bcc" ] "test(a)example.com", envelope :contains "to" "test(a)example.com" ) { fileinto "Test"; stop; }/ and if somebody sends me an email with "test(a)example.com" in "TO" or "CC" - then sieve works properly and put this email in Test folder, but i can't understand why if it sends e-mail to "test(a)example.com" in BCC - sieve don't move it to Test but leave it in Inbox? If i run sieve-test -faD .dovecot.sieve "Message-ID" i get: /Performed actions: * store message in folder: Test Implicit keep: (none) sieve-test(root): Info: final result: success/ but in dovecot log i get: /Info: sieve: msgid=<20130421074437.570EA2BA1C1F(a)mail.com>: stored mail into mailbox 'INBOX'/ and email is going to Inbox folder, instead Test. Please tell me what i am doing wrong and how i can make sieve to work properly with BCC. Thank You. -- View this message in context: http://dovecot.2317879.n4.nabble.com/Sieve-BCC-tp41757.html Sent from the Dovecot mailing list archive at Nabble.com.

4 10

[Dovecot] imap Fatal: bzlib.read(~/mdbox/storage/m.317): Out of memory
by Pascal Volk 20 Apr '13

20 Apr '13

Hi Timo, today I found a raw backtrace after the bzlib.read() out of memory message. Regards, Pascal

1 1

[Dovecot] listen directive changed?
by Nick Edwards 20 Apr '13

20 Apr '13

Timo, Is the global listen directive supposed to be a governing directive, like in apache? or is it there just in case you dont use it in protocols? I set a specific ipv6 address in global listen, but use [::] in proto Testing to a secondary IP, not in the global listen, it still connects, so can I ask has the original use of global listen been deprecated? ciao

3 6

[Dovecot] Moving mail servers, moving mailboxes
by Gregory Sloop 19 Apr '13

19 Apr '13

So, I've done some searching - but search terms are hard to come by, that work, for this query. In short, migrating a RHEL 5.9 server running the back-ported Dovecot 1.0.7 To: Ububtu 12.04 with 2.0.19, I believe. [I'm not against compiling a more recent version if there's some real advantage to doing so. But I'd certainly prefer to stay with the packaged version.] Most users are POP3, with some leaving messages on the server for a while. Other users are IMAP - whole mail repository on server. --- In an ideal world, I'd like to simply copy all the mailboxes/dirs from one server to the other. [Local/LAN file copies are possible] It would be great if the message ID's wouldn't change, so the read/unread/new etc status all all the messages wouldn't change between the two servers for POP/IMAP. --- So, does anyone have a reasonable walk-through for doing so? Is this a poor idea? Should I simply set myself on fire now and save everyone a lot of hassle? :) Would you suggest an alternative, and tell me if it might achieve the objectives above? I'm more than glad to take pointers to threads on this topic. I just haven't been able to dredge this up with my Google-foo. TIA -Greg

5 6

[Dovecot] Multiple Logins on same accounts from different stations, RE-POSTING
by HL 19 Apr '13

19 Apr '13

Sorry List, I am reposting with dovecot -n ------------------------------------------------------------------ Hi, all I've recently upgraded to 2.1.16 and found my self in deep .... There are 4 accounts in my setup that need to be accessed simultaneously by 5-6 PCs on a local lan. The thing is if a user A updates, deletes, flags mail messages in the imap folders the changes don't get propagated to the other mail clients. To state this clearly, PC (A) thunderbird has an account SALES, Maildir etc PC (B) thunderbird also has the SALES account. Changes from PC (A) and vice-versa like marks,deletes, or moves mails around will randomly get propagated to PC (B) Sometimes they do sometimes they don't. This never occured with previous version 1.2.xx I am attaching my doveconf -a output .. Please Help, Thanks in advance Harry -------------------------------------------------------------------- Thanks

5 11

[Dovecot] LDAP authentication
by val john 19 Apr '13

19 Apr '13

Hi guys im new to dovecot , and im trying to authenticate dovecot to LDAP this my configuration dovecot --version 1.2.15 dovecot -n # 1.2.15: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.5 log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap pop3 login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_privileged_group: mail mail_location: mbox:~/mail:INBOX=/var/mail/%u mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 auth default: verbose: yes debug: yes passdb: driver: pam passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf userdb: driver: passwd userdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf *Out put of dovecot-ldap.conf* file uris = ldap://ldap.example.com:389 dn = cn=admin,dc=example,dc=com dnpass = abc tls = no ldap_version = 3 base = ou=users,dc=example,dc=com scope = subtree user_attrs = homeDirectory=home,uidNumber=uid,gidNumber=gid user_filter = (&(objectClass=inetOrgPerson)(uid=%u)) pass_attrs = uid=user,userPassword=password pass_filter = (&(objectClass=inetOrgPerson)(uid=%u)) * * *Out put of LDAP , * # Entry 1: uid=userone,ou=users,dc=example,dc=com dn: uid=userone,ou=users,dc=example,dc=com cn: Firtname Lastname displayname: Firtname Lastname givenname: Firstname mail: userone(a)example.com objectclass: inetOrgPerson objectclass: top sn: Lastname uid: userone userpassword: {SHA}0P/ssspVCIZx8+tVsss= but authentication fails with the follwing error , Please Advice Apr 19 08:18:48 localhost dovecot: auth(default): client in: AUTH#0111#011PLAIN#011service=imap#011secured#011lip=127.0.0.1#011rip=127.0.0.1#011lport=143#011rport=38734#011resp=<hidden> Apr 19 08:18:48 localhost dovecot: auth-worker(default): pam(userone,127.0.0.1): lookup service=dovecot Apr 19 08:18:48 localhost dovecot: auth-worker(default): pam(userone,127.0.0.1): #1/1 style=1 msg=Password: Apr 19 08:18:49 localhost dovecot: auth(default): new auth connection: pid=7517 Apr 19 08:18:50 localhost dovecot: auth-worker(default): pam(userone,127.0.0.1): pam_authenticate() failed: Authentication failure (password mismatch?) Apr 19 08:18:50 localhost dovecot: auth(default): ldap(userone,127.0.0.1): pass search: base=ou=users,dc=example,dc=com scope=subtree filter=(uid=userone) fields=uid,userPassword Apr 19 08:18:50 localhost dovecot: auth(default): ldap(userone,127.0.0.1): result: uid(user)=userone userPassword(password)=<hidden> Apr 19 08:18:50 localhost dovecot: auth(default): client out: OK#0111#011user=userone Apr 19 08:18:50 localhost dovecot: auth(default): master in: REQUEST#0111#0117514#0111 Apr 19 08:18:50 localhost dovecot: auth(default): passwd(userone,127.0.0.1): lookup Apr 19 08:18:50 localhost dovecot: auth(default): passwd(userone,127.0.0.1): unknown user Apr 19 08:18:50 localhost dovecot: auth(default): ldap(userone,127.0.0.1): user search: base=ou=users,dc=example,dc=com scope=subtree filter=(uid=userone) fields=homeDirectory,uidNumber,gidNumber Apr 19 08:18:51 localhost dovecot: auth(default): ldap(userone,127.0.0.1): no fields returned by the server Apr 19 08:18:51 localhost dovecot: auth(default): master out: USER#0111#011userone Apr 19 08:18:51 localhost dovecot: dovecot: User userone is missing UID (see mail_uid setting) Apr 19 08:18:51 localhost dovecot: imap-login: Internal login failure (auth failed, 1 attempts): user=<userone>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured

2 1

[Dovecot] Dovecot and port forwarding
by Slawomir Wawak 19 Apr '13

19 Apr '13

Hello! I try to configure POP3s with Dovecot. My mail server is behind router and I forward 995 port from router to mail server. POP3s works ok when I log directly to 995 on server. Unfortunately, it shows nothing when I log from outside. It happens also when the firewall is off. All I can see in log is this: Apr 19 13:39:43 hostname dovecot: pop3-login: Warning: SSL: where=0x10, ret=1: before/accept initialization [123.123.123.123] Apr 19 13:39:43 hostname dovecot: pop3-login: Warning: SSL: where=0x2001, ret=1: before/accept initialization [123.123.123.123] Apr 19 13:39:43 hostname dovecot: pop3-login: Warning: SSL: where=0x2002, ret=-1: unknown state [123.123.123.123] Apr 19 13:39:43 hostname dovecot: auth: Debug: Loading modules from directory: /usr/lib/dovecot/modules/auth Apr 19 13:39:43 hostname dovecot: auth: Debug: auth client connected (pid=17056) Apr 19 13:39:47 hostname dovecot: pop3-login: Disconnected (no auth attempts): rip=123.123.123.123, lip=10.0.0.2, TLS handshaking: Disconnected (hostname and IPs changed) My config: # 2.0.19: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-40-generic-pae i686 Ubuntu 12.04.2 LTS auth_debug = yes mail_location = mbox:~/mail:INBOX=/var/mail/%u mail_privileged_group = mail passdb { driver = pam } protocols = pop3 service pop3-login { inet_listener pop3s { address = * } } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } verbose_ssl = yes I think it might be something related to SSL, but what? Regards, Slawek.

2 1

Re: [Dovecot] IMAP monitoring
by Joseph Tam 19 Apr '13

19 Apr '13

> From: pvsuja <pvsuja(a)gmail.com> > > I want to get some statistics of dovecot IMAP server like the number of > current IMAP connections, who is logged in to the Dovecot server, doveadm who > bandwidth usage. You can sort of get that from the logs. For example, from my logs Apr 18 23:08:19 server dovecot: imap(user): Disconnected: Logged out in=9516 out=89038 telling you how many bytes tranferred in and out during the session. > Is there any utility which does this sort of full monitoring? > I tried doveadm who to get the details of logged in users. > but its not returning any output even though i am logged in to the server. "doveadm who" ought to work. What does it return? Joseph Tam <jtam.home(a)gmail.com>

3 2

[Dovecot] ot: moving files/dirs from terminal ?
by voytek＠sbt.net.au 19 Apr '13

19 Apr '13

warning, dumb question ahead: I want to re-arrange, rename & create some sub directories below INBOX in my own mailbox; if I use 'mc' from terminal to do so, can that cause me grief...? do I need to ?? re-index explicitly?? afterwards ? how to re-index ? or is that a really _B_ad idea, and, I should do it through say squirrelmail client ? thanks for any pointers! # dovecot --version 2.1.1 INBOX mail path /var/spool/mail/vhosts/dom.tld/voytek(a)dom.tld

3 2

[Dovecot] Slooow imap copy to "Sent" folders
by Frank Bonnet 19 Apr '13

19 Apr '13

Hello Many users here use the "copy to Sent folder" using the IMAP protocol with Dovecot 2.1.15 on a FresBSD 9 server. Since few days this operation ( copy to sent folder ) became longer than before , it could takes several seconds to complete even the message is very short. Is there a parameter I could tweak to boost this a bit ? may users complain with reason thank you

4 3

[Dovecot] IMAP monitoring
by pvsuja 19 Apr '13

19 Apr '13

Dear Sir, I want to get some statistics of dovecot IMAP server like the number of current IMAP connections, who is logged in to the Dovecot server, bandwidth usage. Is there any utility which does this sort of full monitoring? I tried doveadm who to get the details of logged in users. but its not returning any output even though i am logged in to the server. Thanks and regards, Suja -- View this message in context: http://dovecot.2317879.n4.nabble.com/IMAP-monitoring-tp41723.html Sent from the Dovecot mailing list archive at Nabble.com.

1 0

[Dovecot] dovecot index errors since 2.1.12
by Morten Stevens 18 Apr '13

18 Apr '13

Hi, After upgrading to dovecot 2.1.12, I see a lot of these errors: # 2.1.12: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-279.14.1.el6.x86_64 x86_64 CentOS release 6.3 (Final) # Filesystem: ext4 with mdbox storage Dec 10 15:21:04 mail dovecot: imap(user(a)example.org): Error: Cached message size smaller than expected (5010 < 8192) Dec 10 15:21:04 mail dovecot: imap(user(a)example.org): Error: Corrupted index cache file /var/vmail/example.org/user//mdbox/mailboxes/INBOX/Ubuntu/dbox-Mails/dovecot.index.cache: Broken physical size for mail UID 27517 Dec 10 15:21:04 mail dovecot: imap(user(a)example.org): Error: read(/var/vmail/example.org/user//mdbox/storage/m.7123) failed: Input/output error (FETCH for mailbox INBOX/Ubuntu UID 27517) Dec 10 15:21:04 mail dovecot: imap(user(a)example.org): Disconnected: Internal error occurred. Refer to server log for more information. [2012-12-10 15:21:04] in=3391 out=1383967 Dec 17 21:38:34 mail dovecot: imap(user2(a)example.org): Error: Cached message size larger than expected (12222 > 12085) Dec 17 21:38:34 mail dovecot: imap(user2(a)example.org): Error: Corrupted index cache file /var/vmail/example.org/user2//mdbox/mailboxes/LKML/dbox-Mails/dovecot.index.cache: Broken physical size for mail UID 216231 Dec 17 21:38:34 mail dovecot: imap(user2(a)example.org): Error: read(/var/vmail/example.org/user2//mdbox/storage/m.15569) failed: Input/output error (FETCH for mailbox LKML UID 216231) Dec 17 21:38:34 mail dovecot: imap(user2(a)example.org): Disconnected: Internal error occurred. Refer to server log for more information. [2012-12-17 21:38:34] in=4079 out=61996358 Dec 17 21:40:34 mail dovecot: imap(user2(a)example.org): Error: Cached message size larger than expected (6726 > 5302) Dec 17 21:40:34 mail dovecot: imap(user2(a)example.org): Error: Corrupted index cache file /var/vmail/example.org/user2//mdbox/mailboxes/Google/dbox-Mails/dovecot.index.cache: Broken physical size for mail UID 930834 Dec 17 21:40:34 mail dovecot: imap(user2(a)example.org): Error: read(/var/vmail/example.org/user2//mdbox/storage/m.15544) failed: Input/output error (FETCH for mailbox Google UID 930834) Dec 17 21:40:34 mail dovecot: imap(user2(a)example.org): Disconnected: Internal error occurred. Refer to server log for more information. [2012-12-17 21:40:34] in=27666 out=29738162 Since the release of dovecot 2.1.x, I have never seen this error message. After downgrading to 2.1.10 the error is gone. Andy ideas? Best regards, Morten

3 18

[Dovecot] Problem with "convert" Plugin
by Andreas Schnederle-Wagner - Futureweb.at 18 Apr '13

18 Apr '13

Hello, I got a Problem with the "convert" Plugin. Trying to convert from mbox to maildir Format. OS: CentOS release 5.8 (Final) dovecot -version: 1.0.7 (Centos RPM) convert Plugin call: convert_mail = mbox:/opt/pop3/%u:INBOX=/var/spool/mail/%u When converting to maildir - POP3 works fine (except the lost UIDL - so every server-saved message is double downloaded - but did not find any fix for this problem with convert plugin) But the IMAP In-Boxes give me some headache . All Folders are converted correct - and displayed in Mail Client. But all Mails in the IMAP INBOX are "lost" (at least Mail Client won't show them anymore) Newly delivered Mails to the Inbox work - but all older ones are missing. When looking into this Folder: /var/maildata/USER/Maildir/cur/ I can see that newly delivered mails look like this: 1366122898.14776_0.SERVERNAME:2, And the old - converted ones like this: 1366119758.P14442Q12M682874.SERVERNAME:2, Can someone point me in the right direction why the converted Mails are missing? (It worked on other Servers - about 1 year ago - without any problem?!) Thank you Andreas Schnederle-Wagner Futureweb OG Innsbrucker Str. 4 6380 St. Johann schnederle(a)futureweb.at www.futureweb.at www.ortsinfo.at Fon: +43 (0) 5352 65335-0 Fax: +43 (0) 5352 65335-777 Gratis über Skype anrufen | Skype-ID: futureweb

2 1

[Dovecot] qmail-ldap LDA Delivery and sieve
by Ruda Porto Filgueiras 18 Apr '13

18 Apr '13

Hi, I'm using dovecot 2.1.7 on debian Squeeze with ldap integration. Almost everything is working fine and I would link to thank all developers for this amazing piece of software. But after changing my qmail-ldap to do LDA integration get all the benefits from LDA and sieve, some emails return with failure like this: <sar(a)mondialline.com.br>: lda(sar): Fatal: Unknown argument: sar Usage: dovecot-lda [-c <config file>] [-a <address>] [-d <username>] [-p <path>] [-f <envelope sender>] [-m <mailbox>] [-e] [-k] It happens on messanges that could not be delivered and need to be returned to the sender. I'm using the configuration described on wiki to do qmail-ldap integration: http://wiki.dovecot.org/HowTo/qmailldap The relevant delivery command is: | /usr/lib/dovecot/dovecot-lda -a $RECIPIENT -f $SENDER -d $USER I also tried to use this way, as documented here: http://wiki2.dovecot.org/LDA/Qmail | /var/qmail/bin/preline -f /usr/lib/dovecot/dovecot-lda But in that case, some sieve plugins can't detect the mail recipient, like vacation plugin. Finally, the vacation plugin also is not doing email forwarding when I use the first delivery option above. Follow my settings: # LDAP scope = subtree user_attrs = uidNumber=11184,gidNumber=2110 user_filter = (&(objectClass=qmailUser)(uid=%u)(accountStatus=active)) pass_attrs=uid=user,userPassword=password,mailHost=host,=proxy_maybe=y pass_filter = (&(objectClass=qmailUser)(uid=%u)(accountStatus=active)) iterate_attrs = uid=user iterate_filter = (&(objectClass=qmailUser)(accountStatus=active)) # dovecot -n output: # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-xen-amd64 x86_64 Debian 6.0.7 ext4 default_client_limit = 8000 default_process_limit = 2048 disable_plaintext_auth = no hostname = mail.mondialline.com.br lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes lda_original_recipient_header = X-Original-To mail_gid = vmail mail_location = maildir:/dados/vmail/%u/Maildir mail_plugins = zlib mail_privileged_group = vmail mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave vacation-seconds namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = INBOX. separator = . type = private } passdb { args = /etc/dovecot/master-users driver = passwd-file master = yes pass = yes } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { sieve = /dados/vmail/%u/.dovecot.sieve sieve_dir = ~/sieve sieve_extensions = +vacation +vacation-seconds sieve_global_dir = /var/lib/dovecot/sieve/global/ sieve_vacation_default_period = 1h sieve_vacation_max_period = 30d sieve_vacation_min_period = 0 } postmaster_address = ti(a)mondialline.com.br protocols = " imap lmtp sieve" service dict { unix_listener dict { group = vmail mode = 0600 user = vmail } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } process_min_avail = 10 } service imap { process_limit = 2048 } service managesieve-login { inet_listener sieve { port = 4190 } } shutdown_clients = no ssl_cert = </var/qmail/control/cert.pem ssl_key = </var/qmail/control/cert.pem submission_host = mail.mondialline.com.br:25 userdb { args = /etc/dovecot/dovecot-ldap.conf.ext default_fields = uid=vmail gid=vmail home=/dados/vmail/%u driver = ldap } protocol lmtp { auth_socket_path = director-userdb } protocol lda { mail_plugins = zlib sieve } protocol imap { mail_max_userip_connections = 500 mail_plugins = zlib imap_zlib } protocol sieve { mail_max_userip_connections = 100 managesieve_max_line_length = 65536 } Best regards, -- Rudá Porto Filgueiras http://python-blog.blogspot.com http://twitter.com/rudaporto

2 2

[Dovecot] Multiple Logins on same accounts from different stations
by HL 18 Apr '13

18 Apr '13

Hi, all I've recently upgraded to 2.1.16 and found my self in deep .... There are 4 accounts in my setup that need to be accessed simultaneously by 5-6 PCs on a local lan. The thing is if a user A updates, deletes, flags mail messages in the imap folders the changes don't get propagated to the other mail clients. To state this clearly, PC (A) thunderbird has an account SALES, Maildir etc PC (B) thunderbird also has the SALES account. Changes from PC (A) and vice-versa like marks,deletes, or moves mails around will randomly get propagated to PC (B) Sometimes they do sometimes they don't. This never occured with previous version 1.2.xx I am attaching my doveconf -a output .. Please Help, Thanks in advance Harry

2 1

[Dovecot] Pros and cons of having folders under INBOX vs. not
by Rich Wales 18 Apr '13

18 Apr '13

I have some questions about whether I should set up folders under INBOX vs. having them outside the INBOX namespace. I'm setting up a new Dovecot 2.2.0 on an Ubuntu 12.04.2 server. My plan is to move my users (family members) to this new server from an old Cyrus server. Everybody is currently using (and will continue to use) IMAP, and either Thunderbird or SquirrelMail as their e-mail client. I'm using the maildir mailbox format on this new Dovecot server. No one is using the new Dovecot server yet, so I'm still free to do additional tweaking of the server configuration. When I used imapsync to copy everyone's mail to the new server, I found that all the folders (other than INBOX) were renamed. On the old Cyrus server, all the folders are subfolders of INBOX, but the folders on the new Dovecot server are not. (For example, a folder named "INBOX.Dovecot" on the old server was renamed to "Dovecot" on the new server by the imapsync utility.) Can I just keep things this way on the new server? Or are my users going to run into problems if folders are not all under INBOX? I do realize that IMAP servers can be set up either to put everything under INBOX, or not, but I'm not familiar with all the pros/cons. And if I do need (or want) to put all the folders under INBOX, can I simply rename the existing folders in each user's Maildir (and also edit folder names accordingly in everyone's "subscriptions" file)? Or will Dovecot be broken unless I recopy everything from scratch (with a command-line option to imapsync to put everything in the INBOX destination namespace)? Rich Wales richw(a)richw.org

2 1

[Dovecot] auth: passwd file (info): unknown user
by Jim Knuth 18 Apr '13

18 Apr '13

Hello, the problem is: The users are system users (by Confixx) say webxpy. But behind it e-mail puts of course address like info(a)domain.de and so on. Everything functions perfectly, nevertheless, is following in the log. … … dovecot: auth: passwd file (jk): unknown user … dovecot: auth: passwd file (jim.knuth): unknown user … dovecot: auth: passwd file (info): unknown user … and so on It is tried obviously, before the domain part in the passwd file to find user info … However, there is in it only webxpy. How can I solve this dilemma, by which does this come then? auth_username_format = %n Thanks in advance as attached mine dovecot-n -- Mit freundlichen Grüßen, with kind regards, Jim Knuth

1 0

[Dovecot] Dovecot 2.2 & LEMONADE extensions
by Jan Phillip Greimann 18 Apr '13

18 Apr '13

Hi there, I read an article about dovecot 2.2, which includes the LEMONADE extensions, and was fascinated about the feature "Forward without download". We have a small internet-uplink in our office and our CEO loves to receive mails with large attachments, he also reply/forward it, so every time the full attachments get downloaded and uploaded again. Now the question is: Is LEMONADE supported by desktop-mailclients like thunderbird or just mobile Clients? (Google said nothing to this, maybe searched the wrong words) I hope someone can help me with this. Greetings, Jan

6 8

[Dovecot] imap Panic: file index-attachment.c: line 231 (index_attachment_save_finish): assertion failed: (attach->input->eof)
by Pascal Volk 17 Apr '13

17 Apr '13

Hi Timo, some imap processes seems to have some problems. Regards, Pascal

2 8

[Dovecot] Maildirs location migration
by Thomas Hummel 17 Apr '13

17 Apr '13

Hello Timo, I'm using dovecot-2.1.15 with Maildir mailboxes located on an NFS filer. Postfix is used to deliver mail through procmail ("mailbox_command) as LDA. Our team has bought another filer and everything is meant to go on it, so we're planning to migrate those mailboxes to the new filer. To test it only on a subset of users, I ended up to the following solution : 1. keep new messages in postfix mailqueue for those users (via a service and a transport) 2. prevent new dovecot authentication for those users (via the "auth-deny" passwd-file type passdb) 3. doveadm kick those users 4. copy or rsync the mailboxes 5. symlink maildir, control and indexes directories to the new filer (nfs mounted on the mail server) 6. re-enable mail delivery and imap authentication I was wondering if such a migration could be done differently in order to be seamless to the user : - for the postfix part, it would be easy, I guess, to create a new service (and a new transport map using this service) to deliver to the new location - but for the imap part, I'm not sure if it can be done. My guess is that, if feasible, it would involve some namespace settings and a dsync copy but I cannot figure out how exactly. What do you think ? Thanks -- Thomas Hummel | Institut Pasteur <hummel(a)pasteur.fr> | Groupe Exploitation et Infrastructure

2 15

[Dovecot] dovecot-2.2 Warning: autocreate plugin is deprecated, use mailbox { auto } setting instead
by manu＠netbsd.org 17 Apr '13

17 Apr '13

Hi After upgrading to 2.2, I get this: Warning: autocreate plugin is deprecated, use mailbox { auto } setting instead I found no documentation on mailbox { auto }. Where should it go in the config file? -- Emmanuel Dreyfus http://hcpnet.free.fr/pubz manu(a)netbsd.org

4 4

[Dovecot] process_limit must be 1
by FABIO FERRARI 17 Apr '13

17 Apr '13

Hello, recently I have migrated a dovecot configuration from a Red Hat 5 to a CentOS 6. Since the versions of dovecot are quite the same (dovecot-2.0.1-1_118.el5 vs dovecot-2.0.9-5.el6.x86_64), I was thinking that copying the configurations file from one server to the other was a good thing, but instead, when I try to start the service, I have this bad error: Avvio di Dovecot Imap: doveconf: Fatal: Error in configuration file /etc/dovecot/dovecot.conf: service(anvil): process_limit must be 1 Does anyone know why I am getting this? Is there a change in configurations between the 2 versions, is it a known issue or I have to check something else? thanks in advance Fabio Ferrari

1 0

[Dovecot] %{session} does not work with deliver_log_format
by Daniel Parthey 17 Apr '13

17 Apr '13

Hi, # 2.1.10: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-45-server x86_64 Ubuntu 10.04.4 LTS deliver_log_format = mailbox: deliver: session=<%{session}> msgid=%m from=%f: %$ produces log messages always containing "session=<session}>", like this one: Feb 24 09:22:09 10.129.3.233 dovecot: lmtp(3484, user(a)example.org) mbnWK6/NKVGcDQAAiWCYmA: sieve: mailbox: deliver: session=<session}> msgid=<20130224082208.8A807C0CF(a)mx01.example.org> from=postmaster(a)example.org: stored mail into mailbox 'INBOX/postmaster' http://wiki2.dovecot.org/Variables leads me to the assumption that %{session} works "everywhere" and for deliver_log_format too. Is deliver_log_format variable expansion handled differently from login_log_format_elements and mail_log_prefix? Regards Daniel -- https://plus.google.com/103021802792276734820

2 4

Re: [Dovecot] Dovecot 2.1.16: Quota plugin compile fails: Solaris 10
by Joseph Tam 17 Apr '13

17 Apr '13

Stephen Usher writes: > quota-status.c: In function `main': > quota-status.c:200: error: `optarg' undeclared (first use in this function) > ... > It seems that the following C standard header files need to be included in > quota-status.c: > > #include <stdio.h> > #include <stdlib.h> > #include <unistd.h> It was mentioned a few weeks back (check the archives), but you only need one of them (which may include the others). My patch to cope with this --- a/src/plugins/quota/quota-status.c Sat Apr 13 02:18:40 2013 +++ b/src/plugins/quota/quota-status.c Sat Apr 13 02:18:56 2013 @@ -14,0 +14,1 @@ +#include <stdio.h> This worked for me. Joseph Tam <jtam.home(a)gmail.com>

1 0

Re: [Dovecot] Dovecot 2.2.0 compile error
by Timo Sirainen 17 Apr '13

17 Apr '13

On 17.4.2013, at 1.27, Peter Wagner <rauchwolke(a)gmx.net> wrote: >>>> make[6]: Entering directory `/mnt/data/Develop/Openwrt/trunk_git/build_dir/target-mips_r2_uClibc-0.9.33.2/dovecot-2.2.0/src/util' >>>> /bin/sh ../../libtool --tag=CC --mode=link mips-openwrt-linux-uclibc-gcc -std=gnu99 -Os -pipe -mips32r2 -mtune=mips32r2 -fno-caller-saves -mno-branch-likely -fhonour-copts -Wno-error=unused-but-set-variable -msoft-float -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -fno-builtin-strftime -Wstrict-aliasing=2 -I/mnt/data/Develop/Openwrt/trunk_git/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/include -no-undefined -Wl,--as-needed -L/mnt/data/Develop/Openwrt/trunk_git/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/lib -L/mnt/data/Develop/Openwrt/trunk_git/staging_dir/target-mips_r2_uClibc-0.9.33.2/lib -L/mnt/data/Develop/Openwrt/trunk_git/staging_dir/toolchain-mips_r2_gcc-4.6-linaro_uClibc-0.9.33.2/usr/lib -L/mnt/data/Develop/Openwrt/trunk_git/staging_dir/toolchain-mips_r2_gcc-4.6-linaro_uClibc-0.9.33.2/lib -o gdbhelper gdbhelper.o > the weired thing is, when i build it with --without-shared-libs > the program builds fine and works. How can i find out why this works > but using shard-libs doesn't? Probably specific to the mips/linaro/something tools that you're using. Have you tried that v2.1 still compiles? The best way to figure out why it works and v2.2 doesn't would be to find the specific commit from v2.2 that broke it. http://mercurial.selenic.com/wiki/BisectExtension could make finding that easier.

1 0

[Dovecot] Dovecot 2.2.0 compile error
by rauchwolke＠gmx.net 17 Apr '13

17 Apr '13

Hi, i tried to compile dovecot 2.2.0 and i end up with this error: make[6]: Entering directory `/mnt/data/Develop/Openwrt/trunk_git/build_dir/target-mips_r2_uClibc-0.9.33.2/dovecot-2.2.0/src/util' /bin/sh ../../libtool --tag=CC --mode=link mips-openwrt-linux-uclibc-gcc -std=gnu99 -Os -pipe -mips32r2 -mtune=mips32r2 -fno-caller-saves -mno-branch-likely -fhonour-copts -Wno-error=unused-but-set-variable -msoft-float -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -fno-builtin-strftime -Wstrict-aliasing=2 -I/mnt/data/Develop/Openwrt/trunk_git/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/include -no-undefined -Wl,--as-needed -L/mnt/data/Develop/Openwrt/trunk_git/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/lib -L/mnt/data/Develop/Openwrt/trunk_git/staging_dir/target-mips_r2_uClibc-0.9.33.2/lib -L/mnt/data/Develop/Openwrt/trunk_git/staging_dir/toolchain-mips_r2_gcc-4.6-linaro_uClibc-0.9.33.2/usr/lib -L/mnt/data/Develop/Openwrt/trunk_git/staging_dir/toolchain-mips_r2_gcc-4.6-linaro_uClibc-0.9.33.2/lib -o gdbhelper gdbhelper.o ../../src/lib-dovecot/libdovecot.la -export-dynamic -ldl OpenWrt-libtool: link: mips-openwrt-linux-uclibc-gcc -std=gnu99 -Os -pipe -mips32r2 -mtune=mips32r2 -fno-caller-saves -mno-branch-likely -fhonour-copts -Wno-error=unused-but-set-variable -msoft-float -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -fno-builtin-strftime -Wstrict-aliasing=2 -I/mnt/data/Develop/Openwrt/trunk_git/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/include -Wl,--as-needed -o .libs/gdbhelper gdbhelper.o -Wl,--export-dynamic -L/mnt/data/Develop/Openwrt/trunk_git/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/lib -L/mnt/data/Develop/Openwrt/trunk_git/staging_dir/target-mips_r2_uClibc-0.9.33.2/lib -L/mnt/data/Develop/Openwrt/trunk_git/staging_dir/toolchain-mips_r2_gcc-4.6-linaro_uClibc-0.9.33.2/usr/lib -L/mnt/data/Develop/Openwrt/trunk_git/staging_dir/toolchain-mips_r2_gcc-4.6-linaro_uClibc-0.9.33.2/lib ../../src/lib-dovecot/.libs/libdovecot.so -ldl -Wl,-rpath -Wl,/usr/lib/dovecot ../../src/lib-dovecot/.libs/libdovecot.so:(.got+0x0): multiple definition of `_GLOBAL_OFFSET_TABLE_' collect2: ld returned 1 exit status make[6]: *** [gdbhelper] Error 1 make[6]: Leaving directory `/mnt/data/Develop/Openwrt/trunk_git/build_dir/target-mips_r2_uClibc-0.9.33.2/dovecot-2.2.0/src/util' Making all in doveadm make[6]: Entering directory `/mnt/data/Develop/Openwrt/trunk_git/build_dir/target-mips_r2_uClibc-0.9.33.2/dovecot-2.2.0/src/doveadm' Making all in dsync make[7]: Entering directory `/mnt/data/Develop/Openwrt/trunk_git/build_dir/target-mips_r2_uClibc-0.9.33.2/dovecot-2.2.0/src/doveadm/dsync' make[7]: Nothing to be done for `all'. Version 2.1.16 compiled fine. How can i fix this linker error? With kind regards

3 3

[Dovecot] v2.1.11 soon
by Timo Sirainen 17 Apr '13

17 Apr '13

Just to let you know: I'm planning on releasing v2.1.11 today/tomorrow. If you wish to get something fixed for it, ask quickly. :)

8 15

[Dovecot] Small documentation error?
by Axel Luttgens 17 Apr '13

17 Apr '13

Hello, At http://wiki2.dovecot.org/MailboxFormat/mbox: The UID for a new message is calculated from "last used UID" in X-IMAP header + 1 Shouldn't it read "in X-UID header + 1" instead? Axel

2 2

[Dovecot] Delete_to_Trash plugin and quota problem
by BINOTTO Luis SIDOR 16 Apr '13

16 Apr '13

Hello list... I am new at dovecot and I have a problem with it; any help will be very grateful We have a exchange server with outlook at the client side, and we are migrating the exchange server to postfix/dovecot(1.2.15) solution. I enabled the "deleted-to-trash" plugin (v0.3) to move the messages to the Trash folder automatically when it is deleted. Also, I am using quota and quota_imap plugins to maintain the quota for users. The quota rule for Trash folder is unlimit. The problem is, when the client reach their maximum quota and try to delete a mail in the inbox to release space. The delete to trash plugin effectively copy it to the Trash folder, but the original mail still remain (marked for delete) at the inbox folder and the quota does not released. This is my Configuration: Dovecot -n # 1.2.15: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-686 i686 Debian 6.0.6 log_path: /var/log/dovecot.log protocols: imap imaps pop3 pop3s login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_uid: 16343 mail_gid: 16343 mail_location: maildir:mailboxes/mail mail_debug: yes mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugins(default): autocreate deleted_to_trash quota imap_quota mail_plugins(imap): autocreate deleted_to_trash quota imap_quota mail_plugins(pop3): quota mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 imap_client_workarounds(default): delay-newmail outlook-idle netscape-eoh imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh lda: postmaster_address: sirbil(a)sidor.com mail_plugins: quota log_path: /var/log/dovecot.log auth default: mechanisms: gssapi gss-spnego login ntlm username_format: %Ln use_winbind: yes passdb: driver: pam userdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail plugin: autocreate: Trash autosubscribe: Trash deleted_to_trash_folder: Trash quota: maildir:User quota quota_rule: *:storage=100M quota_rule2: Trash:storage=1G quota_warning: storage=80%% /etc/dovecot/scripts/quota-warning.sh 80 quota_warning2: storage=90%% /etc/dovecot/scripts/quota-warning.sh 90 quota_warning3: storage=96%% /etc/dovecot/scripts/quota-exceeded.sh 100 quota_exceeded_message: Ha exedido el tamano del buzon /etc/dovecot/dovecot-ldap.conf: ... user_attrs = postalCode=mail=maildir:/mailboxes/%$/,title=quota_rule=*:storage=%$M ... Am I doing something wrong? Thanking you in anticipation.... L. Binotto " Notificacion Automatica: Este mensaje y cualquier archivo que se adjunte contiene informacion privilegiada y confidencial. Es para uso exclusivo del destinatario. Si usted ha recibido esta comunicacion por error, por favor avisenos inmediatamente. Automatic notification: This e-mail and any file transmitted with it are confidential and may be legally privileged. It is intended solely for the addressee and may not be disclosed to or used by anyone other than the addressee. If you have received this e-mail by mistake , please advise the sender immediately"

1 0

[Dovecot] Sync errors trying to sync old mbox inboxes to dovecot
by Michael Smith 16 Apr '13

16 Apr '13

We are currently running dovecot 2.2.rc3. I am trying to 'dsync mirror' old Qpopper/mbox inboxes to our new Dovecot/mdbox servers. For most of the several thousand accounts, it works without issue. But there are a handful of accounts that are generating the following errors. dsync(joe): Error: Sync failed for mbox file /var/opt/migrate/users/joe/inbox: seq=981 uid=981 uid_broken=0 originally needed 9 bytes, now needs 11 bytes dsync(john): Error: Sync failed for mbox file /var/opt/migrate/users/john/inbox: seq=115028 uid=115028 uid_broken=0 originally needed 34 bytes, now needs 35 bytes dsync(john): Error: Sync failed for mbox file /var/opt/migrate/users/john/inbox: seq=114779 uid=114779 uid_broken=0 originally needed 34 bytes, now needs 35 bytes dsync(john): Error: Sync failed for mbox file /var/opt/migrate/users/john/inbox: seq=114778 uid=114778 uid_broken=0 originally needed 34 bytes, now needs 35 bytes dsync(john): Error: Sync failed for mbox file /var/opt/migrate/users/john/inbox: seq=114621 uid=114621 uid_broken=0 originally needed 34 bytes, now needs 35 bytes dsync(john): Error: Sync failed for mbox file /var/opt/migrate/users/john/inbox: seq=114610 uid=114610 uid_broken=0 originally needed 34 bytes, now needs 35 bytes dsync(john): Error: Sync failed for mbox file /var/opt/migrate/users/john/inbox: seq=114607 uid=114607 uid_broken=0 originally needed 34 bytes, now needs 35 bytes dsync(john): Error: Sync failed for mbox file /var/opt/migrate/users/john/inbox: seq=113993 uid=113993 uid_broken=0 originally needed 34 bytes, now needs 35 bytes dsync(john): Error: Sync failed for mbox file /var/opt/migrate/users/john/inbox: seq=113868 uid=113868 uid_broken=0 originally needed 34 bytes, now needs 35 bytes dsync(john): Error: Sync failed for mbox file /var/opt/migrate/users/john/inbox: seq=113855 uid=113855 uid_broken=0 originally needed 34 bytes, now needs 35 bytes dsync(john): Error: Sync failed for mbox file /var/opt/migrate/users/john/inbox: seq=46725 uid=46725 uid_broken=0 originally needed 32 bytes, now needs 34 bytes What exactly is this error indicating and how can I fix it?

3 9

[Dovecot] Dovecot 2.1.16: Quota plugin compile fails: Solaris 10
by Stephen Usher 16 Apr '13

16 Apr '13

Dovecot 2.1.16 fails to compile giving the following error under Solaris 10. Previously I had no problem compiling 2.1.12. The start of the config.log file contains: It was created by Dovecot configure 2.1.16, which was generated by GNU Autoconf 2.68. Invocation command line was $ ./configure ## --------- ## ## Platform. ## ## --------- ## hostname = luna uname -m = i86pc uname -r = 5.10 uname -s = SunOS uname -v = Generic_148889-01 /usr/bin/uname -p = i386 /bin/uname -X = System = SunOS Node = luna Release = 5.10 KernelID = Generic_148889-01 Machine = i86pc BusType = <unknown> Serial = <unknown> Users = <unknown> OEM# = 0 Origin# = 1 NumCPU = 4 /bin/arch = i86pc /usr/bin/arch -k = i86pc /usr/convex/getsysinfo = unknown /usr/bin/hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH: /usr/sfw/bin PATH: /usr/local/bin PATH: /usr/bin PATH: /usr/sbin PATH: /usr/ccs/bin PATH: /opt/SUNWspro/bin PATH: /usr/ucb GCC version info: Reading specs from /usr/sfw/lib/gcc/i386-pc-solaris2.10/3.4.3/specs Configured with: /builds/sfw10-gate/usr/src/cmd/gcc/gcc-3.4.3/configure --prefix=/usr/sfw --with-as=/usr/sfw/bin/gas --with-gnu-as --with-ld=/usr/ccs/bin/ld --without-gnu-ld --enable-languages=c,c++ --enable-shared Thread model: posix gcc version 3.4.3 (csl-sol210-3_4-branch+sol_rpath) Making all in quota gmake[4]: Entering directory `/usr/local/src/mail/dovecot/dovecot-2.1.16/src/plugins/quota' gcc -DHAVE_CONFIG_H -I. -I../../.. -I../../../src/lib -I../../../src/lib-master -I../../../src/lib-dict -I../../../src/lib-index -I../../../src/lib-mail -I../../../src/lib-storage -I../../../src/lib-storage/index -I../../../src/lib-storage/index/maildir -I../../../src/doveadm -I/usr/local/ssl/include -I/usr/sfw/include -I/usr/local/include -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -fno-builtin-strftime -I/usr/local/ssl/include -MT quota-status.o -MD -MP -MF .deps/quota-status.Tpo -c -o quota-status.o quota-status.c quota-status.c: In function `main': quota-status.c:200: error: `optarg' undeclared (first use in this function) quota-status.c:200: error: (Each undeclared identifier is reported only once quota-status.c:200: error: for each function it appears in.) gmake[4]: *** [quota-status.o] Error 1 gmake[4]: Leaving directory `/usr/local/src/mail/dovecot/dovecot-2.1.16/src/plugins/quota' Steve -- --------------------------------------------------------------------------- IT Systems Administrator, E-Mail:- steve(a)earth.ox.ac.uk Department of Earth Sciences, Tel:- +44 (0)1865 282110 Oxford University, South Parks Road, Oxford, UK. Fax:- +44 (0)1865 272072

1 1

[Dovecot] LDAP attribute as shared mailbox name
by Marek Skubela 16 Apr '13

16 Apr '13

Hello, Is it possible to use LDAP attribute (cn in my case) instead of e-mail address as a shared folder name, so users would see something like: Shared > ExampleCompany Service and not the default Shared > service(a)example.com? -- Regards, Marek Skubela

2 1

[Dovecot] [PATCH] mailbox_get_metadata() for mailboxes with open transactions.
by Dafan Zhai 16 Apr '13

16 Apr '13

Hi everyone, I am writing a dovecot statistic plugin, which calls mailbox_get_metadata() to get the virtual size of the mailbox, if a mail is copied. I have noticed that mailbox_get_metadata() calls mailbox_sync(), and mailbox_sync() will fail for the mailboxes with open transactions. But if a mail is copied, there must be at least one transaction opened for the mailbox. So I can not get the virtual size. Commit [1] has fixed the same problem in mailbox_get_status(). I think the same should also be done in mailbox_get_metadata(). See the patch below. Dovecot version: 2.2.0 OS: OS: Linux 3.4.39-dist i686 maildir:~/Maildir:LAYOUT=fs:INBOX=~/Maildir/INBOX Dafan [1] http://hg.dovecot.org/dovecot-2.2/rev/12136db6e31f # HG changeset patch # User Dafan Zhai <dafan.zhai(a)securepoint.de> # Date 1366118323 -7200 # Node ID 7f0c5122d863d303ef5e74bbf650c2bac89ac564 # Parent f33bacb03cc22e02ca2d11d527d8dc0d99214486 lib-storage: mailbox_get_metadata() no longer forces mailbox to be synced. This fixes getting virtual size through mailbox_get_metadata() of mailboxes with open transactions. diff -r f33bacb03cc2 -r 7f0c5122d863 src/lib-storage/index/index-status.c --- a/src/lib-storage/index/index-status.c Tue Apr 16 15:54:05 2013 +0300 +++ b/src/lib-storage/index/index-status.c Tue Apr 16 15:18:43 2013 +0200 @@ -371,10 +371,10 @@ if (!box->opened) { if (mailbox_open(box) < 0) return -1; - } - if (!box->synced && (items & MAILBOX_METADATA_SYNC_ITEMS) != 0) { - if (mailbox_sync(box, MAILBOX_SYNC_FLAG_FAST) < 0) - return -1; + if ((items & MAILBOX_METADATA_SYNC_ITEMS) != 0) { + if (mailbox_sync(box, MAILBOX_SYNC_FLAG_FAST) < 0) + return -1; + } } if ((items & MAILBOX_METADATA_VIRTUAL_SIZE) != 0) {

2 1

[Dovecot] Dovecot 2.2 multiple master user passdb's not working anymore
by Christian Wiese 16 Apr '13

16 Apr '13

Hi, after an update from dovecot 2.1.16 to 2.2.0 I encountered a problem when using multiple master user passdb's like the following: ----%<--------------------------------------------------------- passdb { args = /etc/dovecot/passwd.foo-master driver = passwd-file master = yes } passdb { args = /etc/dovecot/passwd.bar-master driver = passwd-file master = yes } ----%<--------------------------------------------------------- The former behavior that the passdb's are searched sequentially to find the given master user doesn't seem to work anymore. Only the first passdb is searched, and thus authentication will fail for all master users which are not defined in the first passdb. Because I cannot find any hint that the master user handling has changed fundamentally it looks like a bug, but maybe I missed configuration related changes from 2.1 to 2.2 that is causing this new behavior. Cheers, Chris

2 2

[Dovecot] Probs authenticating to Dovecot
by Kris Magnusson 16 Apr '13

16 Apr '13

Hi folks. I have set up a Ubuntu 12.04 VM with Dovecot, Postfix, MySQL, amavisd, and ISPConfig 3. The VM has tons of RAM and disk and processor and is permanently connected to the Internet with a static IP. I followed the instructions at howtoforge.com to set up and configure this VM and am using ISPConfig to set up a mail hub for multiple domains. I have the DNS for my other domains' MX records pointing at this host—we'll call it "mail." Here's the version of Dovecot I'm using: root@mail:# dovecot --version 2.1.7 Anyway, when I try to connect to my VM and Dovecot using Mail.app on Mountain Lion, I get the following messages in mail.log: Apr 15 01:18:40 mail postfix/smtpd[4284]: connect from 50-196-170-xxx-static.hfc.comcastbusiness.net[50.196.170.xxx] Apr 15 01:18:40 mail dovecot: auth-worker(4331): mysql(localhost): Connected to database dbispconfig Apr 15 01:18:42 mail postfix/smtpd[4284]: warning: 50-196-170-xxx-static.hfc.comcastbusiness.net[50.196.170.xxx]: SASL PLAIN authentication failed: Apr 15 01:18:42 mail postfix/smtpd[4284]: disconnect from 50-196-170-xxx-static.hfc.comcastbusiness.net[50.196.170.xxx] Apr 15 01:18:54 mail dovecot: imap-login: Disconnected (auth failed, 1 attempts in 6 secs): user=<kris>, method=PLAIN, rip=50.196.170.xxx, lip=50.196.170.yyy, TLS, session=<wwn85mHa8AAyxKq9> Apr 15 01:19:04 mail dovecot: imap-login: Disconnected (auth failed, 1 attempts in 10 secs): user=<kris>, method=PLAIN, rip=50.196.170.xxx, lip=50.196.170.yyy, TLS, session=<XGdT52Ha8QAyxKq9> But if I run alpine on mail, I can send and receive mail all day long. Here's a log entry that demonstrates this: Apr 15 01:20:01 mail postfix/smtpd[4284]: connect from localhost[127.0.0.1] Apr 15 01:20:01 mail postfix/smtpd[4284]: lost connection after CONNECT from localhost[127.0.0.1] Apr 15 01:20:01 mail postfix/smtpd[4284]: disconnect from localhost[127.0.0.1] Apr 15 01:20:01 mail dovecot: pop3-login: Disconnected (no auth attempts in 0 secs): user=<>, rip=127.0.0.1, lip=127.0.0.1, secured, session=<FGhS62HaIwB/AAAB> So I thought it was a problem with SASL not liking PLAIN authentication. When I go to /etc/dovecot and print the contents of dovecot.conf, I see that auth_mechanisms = plain login. root@mail:/etc/dovecot# more dovecot.conf listen = *,[::] protocols = imap pop3 auth_mechanisms = plain login disable_plaintext_auth = no log_timestamp = "%Y-%m-%d %H:%M:%S " mail_privileged_group = vmail ssl_cert = </etc/postfix/smtpd.cert ssl_key = </etc/postfix/smtpd.key passdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } userdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } plugin { quota = dict:user::file:/var/vmail/%d/%n/.quotausage sieve=/var/vmail/%d/%n/.sieve } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { group = vmail mode = 0600 user = vmail } user = root } protocol imap { mail_plugins = quota imap_quota } protocol pop3 { pop3_uidl_format = %08Xu%08Xv mail_plugins = quota } protocol lda { mail_plugins = sieve quota } At this point I'm not sure what to think about this. The mailbox is created, it works on the host, so why wouldn't it work over the network? I've tried frobbing settings in Mail.app, as it does have some wonkiness to it, but no dice. The password is fine, everything is in place, it just doesn't work. Any thoughts or recommendations? Thanks, Kris

5 10

[Dovecot] [OT] xi.rename-it.nl dovecot-2.2 stable-auto
by Jan Phillip Greimann 16 Apr '13

16 Apr '13

Hi there, I check my mail-server for debian package-upgrades with Nagios, so everyday I got a mail for 8 "new" dovecot-packages on this server. I think that wasn't so in 2.1 stable-auto, but I'm not sure about that. Maybe someone who uses the 2.1 stable-auto repo could response to this? But 2.2 released only few days ago, maybe the repo-admin hadn't time to change this, or my memory about this is wrong. best regards, Jan

1 0

[Dovecot] Dovecot IMAPS and slow reconnections
by Jarrad 16 Apr '13

16 Apr '13

Hi List, I've recently moved from postfix + courier-imap to a new server with postfix + dovecot with a mysql user management. I have it up and running and receiving mail ok but I'm having problems with IMAP connections being slow. I have an iphone with multiple imap accounts set up on it (4 I think) and when I open the mail app it connects to first account quickly. Then if I navigate to another account it takes about 1 minute to connect (sits there with the 'connecting....' status) Looking at the logs it shows the connection come through at the same time the iphone actually connects so it's as if something is timing out before it actually connects. My setup is an Amazon EC2 micro instance running debian wheezy. There is about 5 domains being hosted with approximately 4-5 accounts for each so it's not a heavy load by any means. I've tried bumping up the max connections, service_count and minimum processes but nothing seems to help. Any advice is much appreciated. My config is as per below: # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-4-amd64 x86_64 Debian 7.0 ext4 auth_debug = yes auth_verbose = yes disable_plaintext_auth = no mail_location = maildir:/var/vmail/%d/%n/Maildir namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } protocols = " imap pop3" service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-master { group = vmail mode = 0600 user = vmail } } service imap-login { process_min_avail = 5 service_count = 10 } ssl_cert = </etc/dovecot/dovecot.pem ssl_key = </etc/dovecot/private/dovecot.key userdb { args = uid=5000 gid=5000 home=/var/vmail/%d/%n/Maildir allow_all_users=yes driver = static } verbose_ssl = yes protocol lda { auth_socket_path = /var/run/dovecot/auth-master log_path = mail_plugins = postmaster_address = <removed for spam reasons> } protocol imap { mail_max_userip_connections = 100 }

1 0

[Dovecot] SSHA512 auth not working
by Marcin Czupryniak 16 Apr '13

16 Apr '13

I'm trying to configure SSHA512 passwords and when testing discovered that they were not working as expected. At first i was using Centos 6.4 which doesn't have the glibc CRYPT newest functions ($6$salt$pass) so had to rollback to the Dovecot format ({SSHA512.HEX}saltedpassword+salt ) but I'm unable to let dovecot authenticate properly. Some logs and details: Apr 16 02:55:37 auth: Debug: client in: AUTH 1 PLAIN service=imap lip=xxx rip=xxx lport=143 rport=58171 resp=AGRpbm9AYWJjLml0AGRpbm8= Apr 16 02:55:37 auth: Debug: sql(dino(a)abc.it,xxxx): query: SELECT '{SSHA512.HEX}' || password as password FROM mailboxes WHERE fullusername='dino(a)abc.it' Apr 16 02:55:37 auth: Info: sql(dino(a)abc.it,xxxx): Password mismatch (given password: dino) Apr 16 02:55:37 auth: Error: md5_verify(dino(a)abc.it): Not a valid MD5-CRYPT or PLAIN-MD5 password Apr 16 02:55:37 auth: Warning: Invalid OTP data in passdb Apr 16 02:55:37 auth: Warning: Invalid OTP data in passdb Apr 16 02:55:37 auth: Debug: sql(dino(a)abc.it,xxxx): SSHA512.HEX(dino) != 'd449914d83c85a786bcde7114b3dfdb24a651c27956388ac641d46eaf40c86e7c95ce2534348730475c8893eab314af189b3a46bf6d76b82cfba119e920813a531e985acd35c47ca8d3cafe50b595b66' Apr 16 02:55:39 auth: Debug: client out: FAIL 1 user=dino(a)abc.it Full password as taken from database: {SSHA512.HEX}d449914d83c85a786bcde7114b3dfdb24a651c27956388ac641d46eaf40c86e7c95ce2534348730475c8893eab314af189b3a46bf6d76b82cfba119e920813a531e985acd35c47ca8d3cafe50b595b66 The first 128 chars are the salted password, remaining 32 the salt (hex uuid representation) I've checked twice that the generated passwords are correct, in fact if you salt the password (dino) you get the exact 128chars as in the stored password but dovecot compares the full password with the salt (160 chars), is this correct? Any ideas?

2 1

[Dovecot] rsync migration issue
by Luigi Rosa 16 Apr '13

16 Apr '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I am trying to migrate a mail server from an old VM to a new one. I have maildir and virtual users, the files and dirs of the file system are owned by a single user. I exported the old (now in production) /var/spool/mail with (ro,no_root_squash) parameters I mounted the NFS on the new server with -o nolock This is not the first time I use this method and it always worked. Until now. If I try to rsync the current maildir structure to the new server I get MANY errors like: rsync: readdir("/mnt/xxxx/username"): Invalid argument (22) rsync: readdir("/mnt/xxxx/username/.Deleted Messages/cur"): Too many levels of symbolic links (40) I tried with rsync -a rsync --force --delete-after --devices --specials --sparse -tPrlHpogEAX rsync --force --delete-after --devices --specials --sparse -tPrlHpogEAXL but the result is the same. Suggestions? I don't want to tgz every mailbox, but I wuold like to do a rsync during the night and a final rsync bevore switching IP addresses to minimize downtime. Ciao, luigi - -- / +--[Luigi Rosa]-- \ It has just been discovered that research causes cancer in rats. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with undefined - http://www.enigmail.net/ iEYEARECAAYFAlFsRfcACgkQ3kWu7Tfl6ZRNbQCgk9AR7THYXT6+rqLFE5H8zSem QhUAnR33bNbcXwWfNSj8PN0YgY40gdHH =salc -----END PGP SIGNATURE-----

1 1

[Dovecot] Dovecot 2.2.0 compile error
by rauchwolke＠gmx.net 16 Apr '13

16 Apr '13

Hi, i tried to compile dovecot 2.2.0 and i end up with this error: make[6]: Entering directory `/mnt/data/Develop/Openwrt/trunk_git/build_dir/target-mips_r2_uClibc-0.9.33.2/dovecot-2.2.0/src/util' /bin/sh ../../libtool --tag=CC --mode=link mips-openwrt-linux-uclibc-gcc -std=gnu99 -Os -pipe -mips32r2 -mtune=mips32r2 -fno-caller-saves -mno-branch-likely -fhonour-copts -Wno-error=unused-but-set-variable -msoft-float -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -fno-builtin-strftime -Wstrict-aliasing=2 -I/mnt/data/Develop/Openwrt/trunk_git/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/include -no-undefined -Wl,--as-needed -L/mnt/data/Develop/Openwrt/trunk_git/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/lib -L/mnt/data/Develop/Openwrt/trunk_git/staging_dir/target-mips_r2_uClibc-0.9.33.2/lib -L/mnt/data/Develop/Openwrt/trunk_git/staging_dir/toolchain-mips_r2_gcc-4.6-linaro_uClibc-0.9.33.2/usr/lib -L/mnt/data/Develop/Openwrt/trunk_git/staging_dir/toolchain-mips_r2_gcc-4.6-linaro_uClibc-0.9.33.2/lib -o gdbhelper gdbhelper.o ../../src/lib-dovecot/libdovecot.la -export-dynamic -ldl OpenWrt-libtool: link: mips-openwrt-linux-uclibc-gcc -std=gnu99 -Os -pipe -mips32r2 -mtune=mips32r2 -fno-caller-saves -mno-branch-likely -fhonour-copts -Wno-error=unused-but-set-variable -msoft-float -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -fno-builtin-strftime -Wstrict-aliasing=2 -I/mnt/data/Develop/Openwrt/trunk_git/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/include -Wl,--as-needed -o .libs/gdbhelper gdbhelper.o -Wl,--export-dynamic -L/mnt/data/Develop/Openwrt/trunk_git/staging_dir/target-mips_r2_uClibc-0.9.33.2/usr/lib -L/mnt/data/Develop/Openwrt/trunk_git/staging_dir/target-mips_r2_uClibc-0.9.33.2/lib -L/mnt/data/Develop/Openwrt/trunk_git/staging_dir/toolchain-mips_r2_gcc-4.6-linaro_uClibc-0.9.33.2/usr/lib -L/mnt/data/Develop/Openwrt/trunk_git/staging_dir/toolchain-mips_r2_gcc-4.6-linaro_uClibc-0.9.33.2/lib ../../src/lib-dovecot/.libs/libdovecot.so -ldl -Wl,-rpath -Wl,/usr/lib/dovecot ../../src/lib-dovecot/.libs/libdovecot.so:(.got+0x0): multiple definition of `_GLOBAL_OFFSET_TABLE_' collect2: ld returned 1 exit status make[6]: *** [gdbhelper] Error 1 make[6]: Leaving directory `/mnt/data/Develop/Openwrt/trunk_git/build_dir/target-mips_r2_uClibc-0.9.33.2/dovecot-2.2.0/src/util' Making all in doveadm make[6]: Entering directory `/mnt/data/Develop/Openwrt/trunk_git/build_dir/target-mips_r2_uClibc-0.9.33.2/dovecot-2.2.0/src/doveadm' Making all in dsync make[7]: Entering directory `/mnt/data/Develop/Openwrt/trunk_git/build_dir/target-mips_r2_uClibc-0.9.33.2/dovecot-2.2.0/src/doveadm/dsync' make[7]: Nothing to be done for `all'. Version 2.1.16 compiled fine. How can i fix this linker error? With kind regards

1 0

[Dovecot] Delete_to_Trash plugin problem
by BINOTTO Luis SIDOR 15 Apr '13

15 Apr '13

Hello list... I am new at dovecot and I have a problem with it; any help will be very grateful We have a exchange server with outlook at the client side, and we are migrating the exchange server to postfix/dovecot(1.2.15) solution. I enabled the "deleted-to-trash" plugin (v0.3) to move the messages to the Trash folder automatically when it is deleted. Also, I am using quota and quota_imap plugins to maintain the quota for users. The quota rule for Trash folder is unlimit. The problem is, when the client reach their maximum quota and try to delete a mail in the inbox to release space. The delete to trash plugin effectively copy it to the Trash folder, but the original mail still remain (marked for delete) at the inbox folder and the quota does not released. Am I doing something wrong? Thanking you in anticipation.... Luis Binotto. " Notificacion Automatica: Este mensaje y cualquier archivo que se adjunte contiene informacion privilegiada y confidencial. Es para uso exclusivo del destinatario. Si usted ha recibido esta comunicacion por error, por favor avisenos inmediatamente. Automatic notification: This e-mail and any file transmitted with it are confidential and may be legally privileged. It is intended solely for the addressee and may not be disclosed to or used by anyone other than the addressee. If you have received this e-mail by mistake , please advise the sender immediately"

1 0

[Dovecot] Dict quota question
by Antoine Nguyen 15 Apr '13

15 Apr '13

Hi all, I'm using Dovecot 2.1.16 and I'd like to know if the following configuration is supported: * An SQL dictionary quota * A static userdb to get uid/gid/home information * An SQL userdb to get per-user quota limit Currenlty, current quota usage are properly stored into the database but per-user limits are not found. If I replace the SQL dictionary by the maildir backend (my previous config.), it works as expected. Do you have any idea? Thanks in advance, Antoine Nguyen http://modoboa.org/

2 3

[Dovecot] lazy_expunge plugin with virtual mailboxes
by Gilles Chauvin 15 Apr '13

15 Apr '13

Hi, When using both lazy_expunge and virtual mailboxes (with, for instance, a "All Messages" virtual mailbox) as soon as a user deletes/expunges a mail in one of its mailbox, Dovecot is saving two mails to the lazy_expunge namespace (the one in the user mailbox and the one in the virtual mailbox). Is there some kind of trick to make Dovecot ignore any mail deleted from a virtual mailbox namespace ? Thanks, Gilles.

1 0

[Dovecot] Coredump -> backtrace Script
by Ralf Hildebrandt 15 Apr '13

15 Apr '13

I wrote a little something about how I'm automatically creating backtraces from coredumps: http://sys4.de/de/blog/2013/04/13/core-catcher-linux/ I've been using this with Dovecot-HEAD and Squid-HEAD, mostly :) -- [*] sys4 AG http://sys4.de, +49 (89) 30 90 46 64 Franziskanerstraße 15, 81669 München Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263 Vorstand: Patrick Ben Koetter, Axel von der Ohe, Marc Schiffbauer Aufsichtsratsvorsitzender: Joerg Heidrich

1 0

Re: [Dovecot] How to manually generate a password hash
by Joseph Tam 15 Apr '13

15 Apr '13

David Murphy writes: http://en.wikipedia.org/wiki/Salt_%28cryptography%29 > So... what am I missing? If the hash was salted, it would seem the > hashes in the database would be longer than the ones generated at the > command line, but that isn't the case. I'm out of ideas. Any guidance > appreciated. The hashes are salted, and that is why the hashes are different, even though the same password is used. (Test it by using the output of "doveadm pw" and plugging it into your test account). The hashes ought to be the same length. The out would be proportional to the length of your input password if the were encrypting, rathher than hashing. But the length of the hash is consant + encoded(salt) + encoded (hash(password)), all of which ought to be fixed lengths. Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] 2.2.0 lmtp runtime error
by Luigi Rosa 14 Apr '13

14 Apr '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I didn't have much time in the last 2 weeks, so I was stuck to a functioning 2.2.rc3 + pigeonhole 0.4.0 Server is CentOS 64: Linux mail.luigirosa.com 2.6.32-358.2.1.el6.centos.plus.x86_64 #1 SMP Wed Mar 13 02:09:07 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux I compiled and installed 2.2.0 and rebuilt pigeonhole 0.4.0 and this hapens ans soon as a new mail arrives: Apr 13 13:18:02 mail dovecot: lmtp(12350, lrosa(a)xxxx.com) Debug: Effective uid=501, gid=501, home=/var/spool/mail/xxxx.com/lrosa/ Apr 13 13:18:02 mail dovecot: lmtp(12350, lrosa(a)xxxx.com) Debug: maildir++: root=/var/spool/mail/xxxx.com/lrosa, index=, indexpvt=, control=, inbox=/var/spool/mail/xxxx.com/lrosa, alt= Apr 13 13:18:02 mail dovecot: lmtp(12350, lrosa(a)xxxx.com) Debug: sieve: Pigeonhole version 0.4.0 initializing Apr 13 13:18:02 mail dovecot: lmtp(12350, lrosa(a)xxxx.com) Debug: sieve: include: sieve_global_dir is not set; it is currently not possible to include `:global' scripts. Apr 13 13:18:02 mail dovecot: lmtp(12350, lrosa(a)xxxx.com) Debug: +VmOJOo+aVE+MAAAP6OfHg: sieve: using the following location for user's Sieve script: /var/spool/mail/xxxx.com/lrosa//.dovecot.sieve;name=main script Apr 13 13:18:02 mail dovecot: lmtp(12350, lrosa(a)xxxx.com) Debug: +VmOJOo+aVE+MAAAP6OfHg: sieve: loading script /var/spool/mail/xxxx.com/lrosa//.dovecot.sieve;name=main script Apr 13 13:18:02 mail dovecot: lmtp(12350, lrosa(a)xxxx.com) Debug: +VmOJOo+aVE+MAAAP6OfHg: sieve: script binary /var/spool/mail/xxxx.com/lrosa//.dovecot.svbin successfully loaded Apr 13 13:18:02 mail dovecot: lmtp(12350, lrosa(a)xxxx.com) Debug: +VmOJOo+aVE+MAAAP6OfHg: sieve: binary save: not saving binary /var/spool/mail/xxxx.com/lrosa//.dovecot.svbin, because it is already stored Apr 13 13:18:02 mail dovecot: lmtp(12350, lrosa(a)xxxx.com) Debug: +VmOJOo+aVE+MAAAP6OfHg: sieve: executing script from /var/spool/mail/xxxx.com/lrosa//.dovecot.svbin Apr 13 13:18:02 mail dovecot: lmtp(12346, lists(a)luigirosa.com) Debug: Namespace : Using permissions from /var/spool/mail/luigirosa.com/lists: mode=0700 gid=default Apr 13 13:18:02 mail dovecot: lmtp(12350, lrosa(a)xxxx.com) Debug: Namespace : Using permissions from /var/spool/mail/xxxx.com/lrosa: mode=0700 gid=default Apr 13 13:18:02 mail dovecot: lmtp(12346, lists(a)luigirosa.com) Fatal: master: service(lmtp): child 12346 killed with signal 11 (core dumps disabled) Apr 13 13:18:02 mail dovecot: lmtp(12350, lrosa(a)xxxx.com) Fatal: master: service(lmtp): child 12350 killed with signal 11 (core dumps disabled) Apr 13 13:18:02 mail dovecot: lmtp(12348, lrosa(a)xxxx.com) Debug: Namespace : Using permissions from /var/spool/mail/xxxx.com/lrosa: mode=0700 gid=default Apr 13 13:18:02 mail dovecot: lmtp(12348, lrosa(a)xxxx.com) Fatal: master: service(lmtp): child 12348 killed with signal 11 (core dumps disabled) Ciao, luigi - -- / +--[Luigi Rosa]-- \ God runs electromagnetics by wave theory on Monday, Wednesday, and Friday, and the Devil runs them by quantum theory on Tuesday, Thursday, and Saturday. --William Bragg -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with undefined - http://www.enigmail.net/ iEYEARECAAYFAlFpQYcACgkQ3kWu7Tfl6ZTCgwCdGeOjpkQNwYPN5JHhG01/fm3d BMQAniE22e2ie4/ab6S2cFf6pFvqgo+U =iHoY -----END PGP SIGNATURE-----

3 6

[Dovecot] Dovecot 2.2.0 Compilation Error
by Jacques Distler 14 Apr '13

14 Apr '13

On MacOSX 10.6, I get: ld: duplicate symbol _cmd_batch in dsync/.libs/libdsync.a(doveadm-dsync.o) and doveadm-mail-batch.o for architecture x86_64 collect2: ld returned 1 exit status make[4]: *** [doveadm] Error 1 when compiling Dovecot 2.2.0. By contrast, 2.1.16 compiled (and runs) just fine. I'm surprised that this hasn't cropped up elsewhere.

2 1

[Dovecot] How to manually generate a password hash
by David Murphy 14 Apr '13

14 Apr '13

Hi folks. I've recently set up a Postfix 2.9.6/Dovecot 2.0.19 IMAPS/SMTPS setup on Ubuntu 12.04.2 (Mysql backend). I'm new to all this, so I apologize if this is fairly basic. I've attempted to the best of my ability to search for an answer, but no luck so far. What I'm trying to do is generate a password hash that I can inject directly into my Mysql database (disaster recovery sort of situation). Towards that goal, I'm trying to use 'doveadm pw' to generate a hash that matches a known password in my database. Unfortunately, I'm coming up empty. My default_pass_scheme in dovecot-sql.conf is set to MD5-CRYPT, and the passwords in the database have no scheme prefixes. I'm attempting to generate a hash with: sudo doveadm pw -s 'MD5-CRYPT' but the hash generated does not match the user's password hash in the database, which is known to be a good password. I'm able to log into this account successfully in both Roundcube and a remote IMAP client. I've also tried using the -p flag and including the password in the command, and that doesn't do it either, though it oddly gives a different response than using the prompt. (What causes this? Newlines?) So... what am I missing? If the hash was salted, it would seem the hashes in the database would be longer than the ones generated at the command line, but that isn't the case. I'm out of ideas. Any guidance appreciated. -Dave

3 4

[Dovecot] LMTP Setup/Design Help Request
by Matthias Hofer 13 Apr '13

13 Apr '13

Hi again, Thank you for your first hints. I have now set up a dedicated test instance of postfix and dovecot to be able to recreate the problems in detail. Even after using your inputs, they do not seem to work with my setup I already mentioned above. I get errors like postfix/lmtp[10994]: C2DF4C000DF: to=<user1(a)mydomain.org>, relay=mail.mydomain.org[private/dovecot-lmtp], delay=0.1, delays=0.05/0/0/0.04, dsn=5.1.1, status=bounced (host mail.mydomain.org[private/dovecot-lmtp] said: 550 5.1.1 <user1(a)mydomain.org> User doesn't exist: user1(a)mydomain.org (in reply to RCPT TO command)) As stated before, my setup is as follows: > I only have virtual users and have set > > mail_uid = dovemail > mail_gid = dovemail > > For authentication, I simply use (for now) a flat file: > > passdb { > driver = passwd-file > args = scheme=PLAIN username_format=%u /etc/dovecot/mypasswd.file > } > > # cat /etc/dovecot/mypasswd.file > user1:{PLAIN}userpw1 > user2:{PLAIN}userpw2 > user3:{PLAIN}userpw3 > > And everything works fine with IMAP. I am completely domain-agnostic > here. I do not know how to strip the domain when the username is handed over from postfix to dovecot, and what would be the sane solution. I hope, you can give me a hint to that. Thank you, again, and greetings, Matthias Hofer

3 4

Re: [Dovecot] LMTP Setup/Design Help Request
by Matthias Hofer 13 Apr '13

13 Apr '13

>> So, is there a way for dovecot-{lda/lmtpd} to accept "user1(a)mydomain.org" but checks for "user1" in the >> user >> DB? > > Try username_format=%n so dovecot uses the username only: > http://wiki2.dovecot.org/Variables > > passdb { > driver = passwd-file > args = scheme=PLAIN username_format=%n /etc/dovecot/mypasswd.file > } Great! I did not think about that, but this solved this issue :D Thank you a lot. And I was now able to solve also my further issues. So I am prepared to try again to switch :) Have great day! Matthias Hofer

1 0

[Dovecot] Migration from courier to dovecot
by ChandranManikandan 12 Apr '13

12 Apr '13

Hi, I am using Courier imap+Qmail+Vpopmail. My IMAP having slow issues on our email client while download message as well switch to another folder. I would request you to give me the procedure for migration as well let me know if anything going wrong after migrate. We have 100 mailboxes and some email box more than 25 GB. I want to access email fast in oulook client 2010 as well squirrelmail. Kindly guide me . Am waiting for your reply asap. -- *Thanks & Best Regards, Manikandan.C *

2 1

[Dovecot] Dovecot / Postfix
by Dan Clovis 12 Apr '13

12 Apr '13

Ave Maria! I have Dovecot and Postifx setup with MySQL - emails seem to go through the server but for some reason the pipe into the wrong Virtual Domain any ideas? Also I notice If you need any other configurations please let me know... mail.info logs: Apr 12 13:30:14 Server1 postfix/smtpd[21411]: connect from mail-qe0-f48.google.com[209.85.128.48] Apr 12 13:30:14 Server1 postfix/trivial-rewrite[21415]: warning: do not list domain ccpop.itco.co in BOTH mydestination and virtual_mailbox_domains Apr 12 13:30:14 Server1 postfix/smtpd[21411]: F365B14EE1AE: client=mail-qe0-f48.google.com[209.85.128.48] Apr 12 13:30:15 Server1 postfix/cleanup[21416]: F365B14EE1AE: message-id=<CAObOquM=KoONc2QnF6HHuzZ_9AN+-+ndymjoDQJ29og=Lxe_og(a)mail.gmail.com> Apr 12 13:30:15 Server1 postfix/qmgr[21407]: F365B14EE1AE: from=<dan.clovis1(a)gmail.com>, size=1706, nrcpt=1 (queue active) Apr 12 13:30:15 Server1 dovecot: auth(default): master in: USER#0111#011dan(a)companycouk.com#011service=deliver Apr 12 13:30:15 Server1 dovecot: auth(default): master out: USER#0111#011dan@companycouk.com#011uid=5000#011gid=5000#011home=/home/vmail/companycouk.com/dan Apr 12 13:30:15 Server1 postfix/pipe[21417]: F365B14EE1AE: to=<dan(a)companycouk.com>, orig_to=<dan(a)ccpop.itco.co>, relay=dovecot, delay=0.29, delays=0.28/0/0/0.01, dsn=2.0.0, status=sent (delivered via dovecot service) Apr 12 13:30:15 Server1 postfix/qmgr[21407]: F365B14EE1AE: removed Postfix main.cf # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = /usr/share/doc/postfix # TLS parameters smtpd_tls_cert_file = /etc/postfix/smtpd.cert smtpd_tls_key_file = /etc/postfix/smtpd.key smtpd_use_tls = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = pop3.companycouk.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = ccpop.itco.co, localhost, localhost.localdomain, companycoServer1, companycoServer1.companycoServer1 relayhost = mynetworks = 127.0.0.0/8 mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all html_directory = /usr/share/doc/postfix/html message_size_limit = 30720000 virtual_alias_domains = virtual_alias_maps = proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, mysql:/etc/postfix/mysql-virtual_email2email.cf virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf virtual_mailbox_base = /home/vmail virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 smtpd_sasl_auth_enable = yes broken_sasl_auth_clients = yes smtpd_sasl_authenticated_header = yes smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination virtual_create_maildirsize = yes virtual_maildir_extended = yes proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $virtual_mailbox_limit_maps virtual_transport = dovecot dovecot_destination_recipient_limit = 1 God Bless Dan

4 4

[Dovecot] How to prevent delivery to mailboxes over quota at SMTP-time
by Ralf Hildebrandt 12 Apr '13

12 Apr '13

Hi! I wrote a little something about how to prevent delivery to mailboxes over quota while still being in the SMTP dialogue: http://sys4.de/en/blog/2013/04/08/postfix-dovecot-mailbox-quota/ (Postfix/Dovecot-2.2) -- [*] sys4 AG http://sys4.de, +49 (89) 30 90 46 64 Franziskanerstraße 15, 81669 München Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263 Vorstand: Patrick Ben Koetter, Axel von der Ohe, Marc Schiffbauer Aufsichtsratsvorsitzender: Joerg Heidrich

3 5

[Dovecot] Problem with vpopmail + qmail + dovecot lda
by Davide 12 Apr '13

12 Apr '13

I have a little problem in my configuration (vpopmail + qmail + dovecot 2.1.12 with LDA) my .qmail-default is this | /var/qmail/bin/preline -f /usr/local/libexec/dovecot/dovecot-lda -d $EXT@$USER -e | /home/vpopmail/bin/vdelivermail '' bounce-no-mailbox I receive al mails to postmaster for non-existent users (all my users are virtual and live under group 89 vpopmail) and this is ok but all mails for quota-full users dosen't If i remove the vdelivermail part in .qmail-default i receive bounce for quota-full but not for non-existent users. If can be usefull this is my dovecot conf auth_cache_size = 10 k auth_cache_ttl = 5 hours auth_mechanisms = plain cram-md5 disable_plaintext_auth = yes dotlock_use_excl = yes first_valid_gid = 89 first_valid_uid = 89 info_log_path = /var/log/dovecot/dovecot.log last_valid_gid = 89 last_valid_uid = 89 listen = 127.0.0.1 log_path = /var/log/dovecot/dovecot-err.log debug_log_path = /var/log/dovecot/dovecot-debug.log log_timestamp = "%Y-%m-%d %H:%M:%S " mail_fsync = never mail_location = maildir:~/Maildir # mail_debug = yes mmap_disable = yes mail_plugins=$mail_plugins notify zlib fts fts_solr quota default_internal_user = dovecot default_login_user = dovenull default_vsz_limit = 512M maildir_very_dirty_syncs=yes verbose_ssl = no # syslog_facility = mail namespace { inbox = yes location = prefix = separator = / type = private } # Public namespace namespace { type = public separator = / prefix = Public/ location = maildir:/var/mail/public subscriptions = no list = children } passdb { args = webmail=127.0.0.1 cache_key=%u%s driver = vpopmail } plugin { fts = solr fts_decoder = decode2text fts_solr = url=http://192.168.10.103:8983/solr/ break-imap-search debug zlib_save_level = 9 # 1..9 zlib_save = gz # or bz2 # sieve = /usr/local/lib/dovecot/sieve/%n.sieve sieve=~/.dovecot.sieve sieve_dir=~/sieve # sieve_default = /usr/local/lib/dovecot/sieve/default.sieve # sieve_global_dir = /usr/local/lib/dovecot/sieve/ mail_log_events = delete undelete expunge copy mail_log_fields = uid box msgid size mail_log_group_events = quota = maildir:User quota quota_rule2 = Trash:storage=+20%% quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u # antispam_debug_target = syslog # antispam_verbose_debug = 1 antispam_backend = pipe antispam_spam = SPAM antispam_unsure = UNSURE antispam_trash_pattern_ignorecase = trash;Deleted * # antispam_signature = X-DSPAM-Signature # antispam_signature_missing = move # antispam_dspam_binary = /usr/local/bin/dspamc # antispam_crm_args = -u;%h;/usr/share/crm114/mailreaver.crm;--fileprefix=/usr/share/crm114/ #sa-learn -u clamav --spam /var/mail/public/.Spam --showdots # antispam_dspam_args = --deliver;--user;%u antispam_pipe_program = /usr/bin/sa-learn # (defaults to /usr/sbin/sendmail) antispam_pipe_program_args = -u;clamav antispam_pipe_program_spam_arg = --spam antispam_pipe_program_notspam_arg = --ham antispam_pipe_tmpdir = /mnt/ramdisk } protocols = imap sieve service auth { unix_listener auth-master { group = vchkpw mode = 0660 user = vpopmail } unix_listener auth-userdb { mode = 0600 user = vpopmail group = vchkpw } # user = vpopmail vsz_limit = 64 M } service imap-login { executable = /usr/local/libexec/dovecot/imap-login inet_listener imaps { address = 192.168.119.150 } process_limit = 500 process_min_avail = 8 service_count = 1 #user = dovecot } service managesieve-login { executable = managesieve-login inet_listener sieve { address = 127.0.0.1 port = 4190 } #inet_listener sieve_deprecated { # port = 2000 #} # Number of connections to handle before starting a new process. Typically # the only useful values are 0 (unlimited) or 1. 1 is more secure, but 0 # is faster. <doc/wiki/LoginProcess.txt> service_count = 1 # Number of processes to always keep waiting for more connections. process_min_avail = 1 # If you set service_count=0, you probably need to grow this. vsz_limit = 64M } service managesieve { # Max. number of ManageSieve processes (connections) process_limit = 10 } # Service configuration protocol sieve { # Maximum ManageSieve command line length in bytes. ManageSieve usually does # not involve overly long command lines, so this setting will not normally need # adjustment managesieve_max_line_length = 65536 # Maximum number of ManageSieve connections allowed for a user from each IP address. # NOTE: The username is compared case-sensitively. #mail_max_userip_connections = 10 # Space separated list of plugins to load (none known to be useful so far). Do NOT # try to load IMAP plugins here. #mail_plugins = # MANAGESIEVE logout format string: # %i - total number of bytes read from client # %o - total number of bytes sent to client managesieve_logout_format = bytes=%i/%o # To fool ManageSieve clients that are focused on CMU's timesieved you can specify # the IMPLEMENTATION capability that the dovecot reports to clients. # For example: 'Cyrus timsieved v2.2.13' managesieve_implementation_string = Dovecot Pigeonhole # Explicitly specify the SIEVE and NOTIFY capability reported by the server before # login. If left unassigned these will be reported dynamically according to what # the Sieve interpreter supports by default (after login this may differ depending # on the user). #managesieve_sieve_capability = #managesieve_notify_capability = # The maximum number of compile errors that are returned to the client upon script # upload or script verification. #managesieve_max_compile_errors = 5 # Refer to 90-sieve.conf for script quota configuration and configuration of # Sieve execution limits. log_path = /var/log/dovecot/dovecot-sieve-error.log info_log_path = /var/log/dovecot/dovecot-sieve.log } service decode2text { executable = script /usr/local/libexec/dovecot/decode2text.sh unix_listener decode2text { mode = 0666 user = dovecot } #user = vpopmail } service imap { executable = /usr/local/libexec/dovecot/imap vsz_limit = 1024M } service quota-warning { executable = script /usr/local/libexec/dovecot/quota_warning # use some unprivileged user for executing the quota warnings user = vpopmail unix_listener quota-warning { group = vchkpw mode = 0660 user = vpopmail } } ssl_cert = </var/qmail/control/servercert.pem ssl_key = </var/qmail/control/servercert.pem userdb { args = quota_template=quota_rule=*:backend=%q driver = vpopmail } protocol imap { imap_client_workarounds = imap_max_line_length = 64 k mail_plugin_dir = /usr/local/lib/dovecot mail_plugins = $mail_plugins imap_quota mail_log antispam imap_zlib } protocol lda { mail_fsync = optimized auth_socket_path = /usr/local/var/run/dovecot/auth-userdb deliver_log_format = msgid=<%f>-<%s>-%m: %$ hostname = mail.cgilfe.it info_log_path = /var/log/dovecot/dovecot-deliver.log log_path = /var/log/dovecot/dovecot-deliver.log mail_plugin_dir = /usr/local/lib/dovecot mail_plugins = $mail_plugins mail_log sieve postmaster_address = postmaster(a)mail.cgilfe.it rejection_reason = Il Vostro messaggio a <%t> è stato automaticamente rifiutato:%n%r sendmail_path = /usr/bin/sendmail # quota_full_tempfail = yes } -- *Davide Marchi* *T*eorema *F*errara *Srl* Via Spronello, 7 - Ferrara - 44121 Tel. *0532783161* Fax. *0532783368* E-m@il: *davide.marchi(a)mail.cgilfe.it* Skype: *davide.marchi73* Web: *http://www.cgilfe.it* *CONFIDENZIALITA'* *Ai sensi del D.Lgs. 196/2003 si precisa che le informazioni contenute in questo messaggio sono riservate ed a uso esclusivo del destinatario/dei destinatari. Qualora il messaggio in parola Le fosse pervenuto per errore, La invitiamo ad eliminarlo senza copiarlo e a non inoltrarlo a terzi, dandocene gentilmente comunicazione.* *Per favore, pensa all'ambiente. Stampa questa email solo se necessario.*

1 0

Re: [Dovecot] Configuring dovecot to use tcp wrappers
by Joseph Tam 12 Apr '13

12 Apr '13

"Max Pyziur" <pyz(a)brama.com> wrote: > I've put in a test ip address in /etc/hosts.deny like so: > dovecot: 166.84.1.2 Maybe imap: 166.84.1.2 imaps: 166.84.1.2 pop3: 166.84.1.2 pop3s: 166.84.1.2 Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] Reading dovecot-uidlist by external program (locking)
by Andrzej A. Filip 11 Apr '13

11 Apr '13

How to lock dovecot-uidlist file before reading by an external program? [perl script]

1 1

Re: [Dovecot] Configuring dovecot to use tcp wrappers
by Max Pyziur 11 Apr '13

11 Apr '13

On Thu, 11 Apr 2013, lists-dovecot wrote: > > [... snip ...] >> >> I've put in a test ip address in /etc/hosts.deny like so: >> dovecot: 166.84.1.2 >> >> And then I execute the following from 166.84.1.2 to port 110: >> bash-3.2$ telnet SiteWhereImConfiguringDovecot 110 >> Trying SiteWhereImConfiguringDovecot... >> Connected to SiteWhereImConfiguringDovecot. >> Escape character is '^]'. >> +OK Dovecot ready. >> quit >> +OK Logging out >> Connection closed by foreign host. >> >> If dovecot is configured with tcp wrappers (which it is; built on >> a CentOS 6 system, installed and configured per instructions), >> and the firewall has ports 110 and 143 open, >> but I'm blocking a particular host through /etc/hosts.deny >> then I should not be able to telnet to either port 110 or 143; both >> requests should be blocked from the originating IP, no? >> >> Much thanks for your help, >> >> Max Pyziur >> pyz(a)brama.com > > > What are you using as the service name in hosts.deny? I think it > should be "imap-login:", (that's what I have as an > historical/left-over entry) but don't have dovecot configured with > wrappers on my current centos system so can't test this to be > certain. Also make certain that you don't have anything in your > hosts.allow file that would override the hosts.deny entry. I was using dovecot, until you convinced me to do otherwise. Putting pop3 in /etc/hosts.deny with the associated ip seems to work, like so: pop3: 166.84.1.2 or imap imap: 166.84.1.2 (are there any challenges to this?) Given that services such sendmail and sshd respond to sshd: xxx.xxx.xxx.xxx sendmail: xxx.xxx.xxx.xxx I thought that it should be dovecot: xxx.xxx.xxx.xxx As a suggestion, can dovecot binaries for distributions such as CentOS and Fedora be compiled with tcp wrappers by default? > - Richard Much thanks. MP pyz(a)brama.com

1 0

[Dovecot] Questions about the upcoming Object Storage Plugin for 2.2
by Charles Marcus 11 Apr '13

11 Apr '13

Hi Timo, I'm curious and have questions about the new Object Storage Plugin (OSP), and how it can be leveraged by an SMB like us. First, am I reading this right where it could be used as a kind of 'live/realtime backup' solution, where everything is stored *both* locally and in the cloud, with two-way syncing, ie, so local users could access the local server for faster access, and when outside the office, they'd access the cloud based storage and any changes made there are sync'd back to the local server? Or is it intended to be more as an alternative storage for storing older emails in a separate namespace? Or both/either? Second, is SIS fully supported by the OSP? Third - I'm a little confused by the Amazon S3 pricing page, especially on how to try to estimate the costs for usage (bandwidth, etc)... do you have any idea how to go about estimating that? Is there some kind of process we could use on our existing server to measure it over a given period of time that would give us an estimate of what to expect if we decided to switch over? Last - have you established pricing for the OSP? Will it be per user, or per MB/GB, per month (or per year), or just a one-time cost? And/or will you include/bundle it with any/all of your support tiers? Sorry if I'm jumping the gun here... Thanks, really looking forward to the 2.2 release! -- Best regards, Charles

2 3