- dovecot - dovecot.org

[Dovecot] Convert from maildir to dbox
by Daniel L. Miller 31 Mar '09

31 Mar '09

Ok...I made the leap. Compiled a copy of 1.2b4 (very pleasant compile BTW - almost no warnings, nice code Timo!)...tweaked a config...had a few false starts... 1.2b4 seems to working quite nicely. Now...for my next magical trick... I would like to migrate from maildir to dbox. I've tried using the convert plugin, but it kept failing during the conversion. I should mention my paths: home (old & new) = /var/mail/%d/%n old mail = maildir:/var/mail/%d/%n new mail = dbox:/var/mail/%d/%n/dbox Note that "home" was defined as the same path as "mail" in my old config - I'm looking to fix that as well during the migration. I found entries in my mail log after the convert execution similar to: Mar 30 19:00:52 bubba dovecot: IMAP(sfox(a)amfes.com): rename(/var/mail/amfes.com/sfox/.dovecot.convert.lock/cur, /var/mail/amfes.com/sfox/dbox/mailboxes/dovecot/convert/lock/dbox-Mails) failed: Not a directory Mar 30 19:01:41 bubba dovecot: IMAP(sfox(a)amfes.com): Mailbox conversion failed for mailbox dovecot.convert.lock Now that I'm staring at that line...I'm wondering if that "home=mail" configuration is part of the problem. I currently have about a dozen users on this box - but with very large mailboxes (I still have archived mailing lists in mine!). If there's a few manual steps I need to perform to "condition" this setup prior to conversion please advise. Should I manually shift the mailboxes into a "/var/mail/%d/%n/maildir" folder? -- Daniel

2 1

[Dovecot] MAILBOXDIR question
by Stewart Dean 31 Mar '09

31 Mar '09

I'm unclear about where and how this is to be used. I gather it is to be a new standard, but I didn't seem to find anything about it in the Dovecot Wiki Mail Location page. There are some words about it in the 1.1.12/3 release notes, but perhaps I'm thick, but they're meta-ambiguous to me. Is it meant to be used like this: mail_location = mbox:MAILBOXDIR=~/mail:INBOX=/var/mail/%u instead of the current mail_location = mbox:~/mail:INBOX=/var/mail/%u ??? Sorry to be so dense. -- ==== Once upon a time, the Internet was a friendly, neighbors-helping-neighbors small town, and no one locked their doors. Now it's like an apartment in Bed-Stuy: you need three heavy duty pick-proof locks, one of those braces that goes from the lock to the floor, and bars on the windows.... ==== Stewart Dean, Unix System Admin, Bard College, New York 12504 sdean(a)bard.edu voice: 845-758-7475, fax: 845-758-7035

3 2

[Dovecot] Panic: Trying to allocate 2147483648 bytes
by David Halik 30 Mar '09

30 Mar '09

Hi all, I recently upgraded from courier to dovecot 1.1.12 on a Solaris 9 system with about 100 users. We have been testing dovecot for sometime in a mixed Linux/Solaris environment and are aware of the index endianess issue with multiple archs. To solve this, we run with INDEX=MEMORY (as seen in the docs) so that only Linux clients have anything to do with the indexes. We generally have much more of them anyways. So far everything is working smoothly, but when someone does a search through directory with a large number of emails, dovecot dies and prints the following message: [ID 107833 mail.crit] Panic: Trying to allocate 2147483648 bytes I googled around and saw this same issue elsewhere, with NFS indexes usually being the problem. However, we have indexes turned off, so I don't understand why the same problem is still happening. Just to be sure, I ran with: mmap_disable = yes dotlock_use_excl = no mail_nfs_storage = yes But there has been no change, I can still reproduce it at will. Setting mail_nfs_index = yes caused my connections to stop working, so that didn't help either. Besides, I wouldn't think that would be the answer considering we set INDEX=MEMORY. This thread also seems to be related, but we're definitely running with this code in 1.1.12, yet it still happens: http://dovecot.org/list/dovecot/2008-September/033615.html I grabbed a backtrace if it is helpful: http://pastebin.com/f5f3d282c Also, here is dovecot -n: # 1.1.12: /usr/local/etc/dovecot.conf # OS: SunOS 5.9 sun4u protocols: imap imaps pop3 pop3s ssl_cert_file: /usr/local/ssl/certs/nbcs.key+crt.pem ssl_key_file: /usr/local/ssl/certs/nbcs.key+crt.pem login_dir: /usr/local/var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_greeting_capability(default): yes login_greeting_capability(imap): yes login_greeting_capability(pop3): no mail_location: maildir:~/Maildir:INDEX=MEMORY mmap_disable: yes mail_nfs_storage: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota pop3_quota mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 pop3_uidl_format(default): %08Xu%08Xv pop3_uidl_format(imap): %08Xu%08Xv pop3_uidl_format(pop3): UID%u-%v namespace: type: private separator: . prefix: INBOX. inbox: yes list: yes subscriptions: yes auth default: passdb: driver: pam args: * userdb: driver: passwd plugin: quota: fs Any help would be appreciated! Thanks, -Dave -- ================================ David Halik System Administrator OIT-CSS Rutgers University dhalik(a)jla.rutgers.edu ================================

3 14

[Dovecot] Upgrade from 1.0 to 1.1, plus migration from Maildir to dbox
by Daniel L. Miller 30 Mar '09

30 Mar '09

Ok - I gave up on trying to get CIFS to work - there's obviously stuff going on I don't understand. So - instead of trying to get a virtual server to work, I next tried a chroot. That worked...but imapsync error'ed out trying to handle one of my large mailboxes. I was trying to setup a "new" server, migrate all my mail over, verify everything worked - maybe even leave the virtual server operating for a while. But the fates are consipiring against me. So - time to make the leap. I want to upgrade a live version 1.0 server to version 1.1 (from Ubuntu repositories, using version 1.0.10 to 1.1.4). What special steps do I need to take to have this go smoothly? At least I have some semi-tested configs for 1.1 that I can use. Do I just stop the server, upgrade, upgrade the configs, start - and pray? Or is there another step? Also, my legacy installation was using maildir - I'd like to try shifting to dbox. Do I just need to change the prefix on mail_location and the conversion will magically happen? -- Daniel

3 2

[Dovecot] [Help] How get the complete CAPABILITY list?
by tao.6.yang＠nokia.com 30 Mar '09

30 Mar '09

I run a telnet localhost 143 to get into my loopback installation of Dovecot on Ubuntu8.04 I have the auth default {} containing the following auth mechanisms, auth default: mechanisms : plain login cram-md5 digest-md5 I had an user which is called user1, I do the following after telnet localhost 143 A Login user1 <user1's pwd> A CAPABILITY I expect to get the list that contains the following - AUTH=PLAIN AUTH=LOGIN AUTH=CRAM-MD5 AUTH=DIGEST-MD5 But actually I did not get the above content, I only get a short list as below, CAPABILITY IMAP4rev1 SASL -IR SORT THREAD=REFERENCES MULTIAPPEND UNSELECT LITERAL+ IDLE CHILDREN NAMESPACE LOGIN-REFERRALS A OK Capability completed Why did I miss the AUTH=PLAIN AUTH=LOGIN AUTH=CRAM-MD5 AUTH=DIGEST-MD5?? Please kindly let me know what I missed for the configuration. Thanks, taoyang

4 7

[Dovecot] dovecot: auth(default): ldap(...): Authenticated user not found
by Stas SUSHKOV 29 Mar '09

29 Mar '09

Hi, I'm trying to set up dovecot together with postfix and experience some problems. Here's in details what I have and what I want to get. I have a ldap server on localhost, a working setup of dovecot to serve sasl, imap using ldap, a working setup of Postfix for (s)smtp (I can authenticate which uses dovecot's sasl). What i wan't to get is a completely working email server for ldap users with their email forwardings (so far they have only 1 forwarding). The porblem I stuck on is the following: when sending mail through (s)smtp, after passing authentication, I get my email dropped. And I see this in logs: http://ciorne.softwareliber.ro/index.php/view/raw/aaf3eb42 ***Authenticated user not found!!!*** My dovecot conf is this: http://ciorne.softwareliber.ro/index.php/view/raw/f8696531 And my dovecot-ldap is this: http://ciorne.softwareliber.ro/index.php/view/raw/698dc851 (I'm using prefetch) Can somebody point me where's my problem. *Any* advices are welcomed!!! Thank you in advance. P.S.: Environment is a vanilla installation of Ubuntu 8.04.02 with latest updates. -- () Campania Panglicii în ASCII /\ http://stas.nerd.ro/ascii/

2 5

[Dovecot] Stephan Dietrich ist außer Haus.
by Stephan Dietrich 29 Mar '09

29 Mar '09

Ich werde ab 28.03.2009 nicht im Büro sein. Ich kehre zurück am 01.04.2009. Ihre Nachricht wird nach meiner Rückkehr am 01.04.2009 beantwortet, falls dies erforderlich ist.

2 1

[Dovecot] sendmail with dovecot sasl
by Mario Pavlov 28 Mar '09

28 Mar '09

Hi, I was wondering if I can make sendmail use dovecot's SASL implementation...maybe I should somehow compile it against dovecot's SASL ? My idea is to make sendmail and dovecot authenticate against one central user/password repository. Is this possible ? thank you. P.S. I want to use virtual users

2 1

[Dovecot] multiple sql servers - loadbalancing and failover
by Arkadiusz Miskiewicz 28 Mar '09

28 Mar '09

Hi, Is there a way for dovecot to use a pool of sql (mysql) servers and load balance queries between these? Also fallback to next available sql server if connection to previous one fails. Can dovecot do such things currently? (If not this is feature request). -- Arkadiusz Miśkiewicz PLD/Linux Team arekm / maven.pl http://ftp.pld-linux.org/

6 11

[Dovecot] Making changes to dovecot log levels
by Thomas M Goerger 27 Mar '09

27 Mar '09

Hi Timo, Not sure if you saw this yet, or if you're still working on a response. Awhile back I'd written about making changes to some of the log levels that dovecot writes to to stop the process from writing these to monitor. I wanted to run a few changes by you for this, just to make sure these won't cause problems somewhere else. And to send this to the list, in case anyone else wants to make similar changes in the future. In the file src/lib-index/mail-index.c: duplicate the function mail_index_set_error to mail_index_set_warning and call this function in /src/lib-index/mail_cache.c instead int mail_index_set_error(struct mail_index *index, const char *fmt, ...) { va_list va; i_free(index->error); if (fmt == NULL) index->error = NULL; else { va_start(va, fmt); index->error = i_strdup_vprintf(fmt, va); va_end(va); i_error("%s", index->error); } return -1; } changing the line : i_error("%s", index->error); to i_warning("%s", index_error); and for the file src/lib-storage/index/mbox/mbox-sync.c changing this code if (rec == NULL && uid < sync_ctx->idx_next_uid) { /* this UID was already in index and it was expunged */ mbox_sync_set_critical(sync_ctx, "mbox sync: Expunged message reappeared in mailbox %s " "(UID %u < %u, seq=%u, idx_msgs=%u)", sync_ctx->mbox->path, uid, sync_ctx->idx_next_uid, sync_ctx->seq, messages_count); ret = FALSE; rec = NULL; } else if (rec != NULL && rec->uid != uid) { /* new UID in the middle of the mailbox - shouldn't happen */ mbox_sync_set_critical(sync_ctx, "mbox sync: UID inserted in the middle of mailbox %s " "(%u > %u, seq=%u, idx_msgs=%u)",sync_ctx->mbox->path, rec->uid, uid, sync_ctx->seq, messages_count); ret = FALSE; rec = NULL; from mbox_sync_set_critical( etc... to mail_storage_clear_error(storage) i_warning("Error text"... mail_storage_set_internal_error(storage) to clear and set the storage pointer Hopefully that's all clear. If you have any questions, please let me know. Thanks, ************************************************************************* * Tom Goerger - Email/Unix System Administrator * * * * University of Minnesota Email: tmg(a)umn.edu * * Operations, Infrastructure and Architecture Phone: 4-5804 * * Internet Services Office: 626J WBOB * * * *************************************************************************

1 0

[Dovecot] [Help] How get the complete CAPABILITY list?
by tao.6.yang＠nokia.com 27 Mar '09

27 Mar '09

dovecot version 1.0.10 I run a telnet localhost 143 to get into my loopback installation of Dovecot on Ubuntu8.04 I have the auth default {} containing the following auth mechanisms, from dovecot -n, I get this, auth default: mechanisms : plain login cram-md5 digest-md5 I had an user which is called user1, I do the following after telnet localhost 143 A Login user1 <user1's pwd> A CAPABILITY I expect to get the list that contains the following - AUTH=PLAIN AUTH=LOGIN AUTH=CRAM-MD5 AUTH=DIGEST-MD5 But actually I did not get the above content, I only get a short list as below, CAPABILITY IMAP4rev1 SASL -IR SORT THREAD=REFERENCES MULTIAPPEND UNSELECT LITERAL+ IDLE CHILDREN NAMESPACE LOGIN-REFERRALS A OK Capability completed Why did I miss the AUTH=PLAIN AUTH=LOGIN AUTH=CRAM-MD5 AUTH=DIGEST-MD5?? Please kindly let me know what I missed for the configuration. Thanks, taoyang

2 1

[Dovecot] outlook problem if TLS mailsettings are off
by Georg Käfer 27 Mar '09

27 Mar '09

Dear List, I dont know if its a config problem or its an outlook 2007 issue. Behaviour: If I set /etc/dovecot/dovecot.conf: Following is valid with IMAP mailboxes only: disable_plaintext_auth = yes # outlook 2007 with TLS in/out enabled) can show index of mails and klick on mail does preview / doubleklick opens mail PERFECT AS INTENDED disable_plaintext_auth = no # outlook 2007 with TLS/SSL OFF can show index of mails, but (double)-/klick on mail gives me "sandwatch"-mouspointer and I've to restart outlook again (and enable TLS again to get it work again) with POP3 mailbox both variants are working smoothly. Other ssl/tls settings: ssl_disable = no login_process_per_connection = yes using or not using following makes no difference... imap_client_workarounds(default): outlook-idle delay-newmail imap_client_workarounds(imap): outlook-idle delay-newmail pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh I'm sad - but I cant force SSL/TLS for my users - so I cant "solve" this by using "disable_plaintext_auth = yes" Is there any way out of the dark? my data: gentoo linux dovecot 1.1.7 postfix 2.5.5 postfixadmin-2.2.1.1 mysql 5.0.70-r1 php 5.2.8-pl12 dovecot -n # 1.1.7: /etc/dovecot/dovecot.conf # OS: Linux 2.6.26-gentoo-r3 i686 Gentoo Base System release 1.12.11.1 ext3 protocols: pop3 pop3s imap imaps ssl_cert_file: /etc/ssl/dovecot/server.pem ssl_key_file: /etc/ssl/dovecot/server.key login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login mail_max_userip_connections(default): 10 mail_max_userip_connections(imap): 10 mail_max_userip_connections(pop3): 30 first_valid_uid: 8 last_valid_uid: 8 first_valid_gid: 12 last_valid_gid: 12 mail_privileged_group: mail mail_uid: mail mail_gid: mail mail_location: maildir:/var/mail/%d/%n/Maildir/:INDEX=/var/mail/%d/%n/indexes mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 imap_client_workarounds(default): outlook-idle delay-newmail imap_client_workarounds(imap): outlook-idle delay-newmail imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: mechanisms: plain login passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: prefetch userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: mail group: mail regards, Georg

1 0

[Dovecot] very slow pop3 downloads
by Kae Verens 27 Mar '09

27 Mar '09

Hi all, I have a dovecot installation which very suddenly decided to slow to a crawl yesterday after being totally fine for months. IMAP is fine, but POP3 is very painful to use, and frequently times out. here's my config: # 1.0.7: /etc/dovecot.conf log_path: /var/log/dovecot_errors info_log_path: /var/log/dovecot_informational ssl_ca_file: /etc/postfix/ssl/cacert.pem ssl_cert_file: /etc/postfix/ssl/postfix.webworks.ie.crt ssl_key_file: /etc/postfix/ssl/postfix.webworks.ie.key login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login login_process_per_connection: no login_processes_count: 6 first_valid_uid: 89 mail_location: maildir:/home/vmail/%d/%n mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: passdb: driver: pam passdb: driver: sql args: /etc/dovecot-mysql.conf userdb: driver: sql args: /etc/dovecot-mysql.conf I tried an strace as suggested by some other people. didn't know exactly what to attach it to, so did a "ps aux" (Centos 5.2, btw) and chose the first "pop3" process: [root@postfix cur]# strace -p 1697 Process 1697 attached - interrupt to quit gettimeofday({1238146840, 724484}, {0, 0}) = 0 gettimeofday({1238146840, 724542}, NULL) = 0 poll([{fd=4, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=2, events=POLLERR|POLLHUP|POLLNVAL}, {fd=0, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=1, events=POLLOUT|POLLERR|POLLHUP|POLLNVAL}], 4, 3123) = 0 gettimeofday({1238146843, 847540}, {0, 0}) = 0 gettimeofday({1238146843, 847590}, NULL) = 0 poll([{fd=4, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=2, events=POLLERR|POLLHUP|POLLNVAL}, {fd=0, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=1, events=POLLOUT|POLLERR|POLLHUP|POLLNVAL, revents=POLLOUT}], 4, 10000) = 1 gettimeofday({1238146847, 807077}, {0, 0}) = 0 write(1, "6DEDK02J5VXFQtloRQ/JPgdcCrSmSRXj"..., 2171) = 2171 setsockopt(1, SOL_TCP, TCP_CORK, [1], 4) = 0 pread64(9, "7P8JZloV9g/oYWdnm\nnZ9f+xzkO3fVXr"..., 4096, 102400) = 4096 write(1, "\r\nLhQoxZy+rq1TZXl2ZtrKrZH15dE2PK"..., 4134) = 3669 write(1, "uv69IdP6FDbO0lztPh2sA6Z/wBqIdP9Y"..., 465) = -1 EAGAIN (Resource temporarily unavailable) setsockopt(1, SOL_TCP, TCP_CORK, [0], 4) = 0 gettimeofday({1238146847, 807691}, NULL) = 0 poll([{fd=4, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=2, events=POLLERR|POLLHUP|POLLNVAL}, {fd=0, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=1, events=POLLOUT|POLLERR|POLLHUP|POLLNVAL}], 4, 6040) = 0 gettimeofday({1238146853, 847046}, {0, 0}) = 0 gettimeofday({1238146853, 847095}, NULL) = 0 poll([{fd=4, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=2, events=POLLERR|POLLHUP|POLLNVAL}, {fd=0, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=1, events=POLLOUT|POLLERR|POLLHUP|POLLNVAL, revents=POLLOUT}], 4, 10000) = 1 gettimeofday({1238146856, 546780}, {0, 0}) = 0 write(1, "uv69IdP6FDbO0lztPh2sA6Z/wBqIdP9Y"..., 465) = 465 setsockopt(1, SOL_TCP, TCP_CORK, [1], 4) = 0 pread64(9, "24\nekSIYgeKr5kpQwrk4iWMqC2+/uvwf"..., 4096, 106496) = 4096 write(1, "\r\nIHaoJDSPFqr4jw9SP8S2yLsWOt2RVx"..., 4134) = 4134 pread64(9, "DUJvKTRdVNxs3JTdRQYqD61EYbg22DLb"..., 4096, 110592) = 4096 write(1, "\r\nbDlx3+0LszvjOrD5+04T8PF39frFpQ"..., 4134) = 1241 write(1, "9Zc/wAr\r\nF1bI22U8dNTIKBc423KFJSO"..., 2893) = -1 EAGAIN (Resource temporarily unavailable) setsockopt(1, SOL_TCP, TCP_CORK, [0], 4) = 0 gettimeofday({1238146856, 547406}, NULL) = 0 poll( <unfinished ...> Process 1697 detached looking forward to you all saving my sanity! thanks, kae

1 1

[Dovecot] Preventing IMAP folder deletion?
by dovecot＠corwyn.net 27 Mar '09

27 Mar '09

Hi! I'm running postfix with dovecot using mysql for user accounts, with Outlook being used as the IMAP mail client. I'm using a mail delimiter ("+") and mail automatically goes to a Spam folder as part of spam filtering with amavisd and spam assassin. It's configured so that folders won't automatically create; if the folder isn't there mail delivers to the inbox (so that spam doesn't create extra folders). the problem I ran into today is that a user deleted the Spam folder. While recreating it isn't that hard, is there a way I can prevent them from being able to delete specific folders in IMAP? In squirrelmail I can create "system" folders that the user can't change or delete, but that's client based. Since I don't see that ability in Outlook, can I somehow configure dovecot so the user can't delete specified folders? Thanks Rick Rick Steeves http://www.sinister.net "The journey is the destination"

2 2

[Dovecot] Version 2.0 with multiple IP/TLS certificate support.
by Gordon Dickens 26 Mar '09

26 Mar '09

Hello, I sent this email earlier but for some reason it did not go through so I will try again! I am using Dovecot on several servers that require multiple domain SSL certificates. I like Dovecot very much because of its speed and stability. Currently, Dovecot does not support multiple SSL certificates directly although I have gotten around this problem with multiple Dovecot instances running multiple configuration files. However, I would prefer to have one configuration file that supports multiple domain certificates. My understanding is that Dovecot Version 2.0 will have this "multiple SSL certificate" feature. So, my question is, when is version 2.0 projected to be released? Many thanks! Gordon Dickens

4 5

[Dovecot] v1.2.beta4 released
by Timo Sirainen 26 Mar '09

26 Mar '09

http://dovecot.org/releases/1.2/beta/dovecot-1.2.beta4.tar.gz http://dovecot.org/releases/1.2/beta/dovecot-1.2.beta4.tar.gz.sig This release fixes a memory corruption bug related to MODSEQ handling in earlier v1.2 releases. Memory corruption means that it's a security bug and possibly exploitable. MODSEQ code is new in v1.2, so v1.1 and older releases are not affected. Other than that, there is an ESORT bugfix and other fixes that were added to v1.1 branch too.

3 2

[Dovecot] Dovecot 1.2 beta1 in Solaris 10 for sparc, error reading maildir format?
by Andrés Yacopino 26 Mar '09

26 Mar '09

Greetings, i have installed dovecot 1.2beta1. I get an error like (in folders from squirrelmail): -* ERROR: Connection terminated by IMAP SERVER".*Query: SELECT "INBOX" -* ERROR: Connection terminated by IMAP SERVER** *Query: STATUS "INBOX" (MESSAGES UNSEEN RECENT) in syslog i get: acamail dovecot: [ID 583609 mail.error] child 3322 (imap) killed with signal 10 In happens with all mail (from dovecot 1.1 maildir) and with new mail. For example, i have deleted all the maildirs folders, then i sent two mails, the first one, i am able to read the first one from Sent Folder, but when i sent the second one, the Sent Folder give me an error (and it can't be readed): *-ERROR: Connection terminated by IMAP SERVER* Query: SELECT "Enviados" (Sent Folder) The problem is the same with outlook express. Is there some bug related with this version?. I will try 1.2 beta 2 and let you know how it goes. Greetings, -- Andrés Fernando Yacopino Infraestructura - Dpto Sistemas AcaSalud Cooperativa de Prestaciones Médico Asistenciales Limitada Tel: 0341-4208726 ayacopino(a)acasalud.com.ar

3 7

[Dovecot] LIST command claims children exist in empty folder
by Jonathan Siegle 26 Mar '09

26 Mar '09

Dovecot 1.2 (8834:5284f45c249a) Should list return \HasChildren if no folders exist under it? I'm using mbox format. 2 create testfolder/ 2 OK Create completed. 3 list "testfolder/" * * LIST (\Noselect \HasChildren) "/" "testfolder/" 3 OK List completed. 4 list "testfolder/" % * LIST (\Noselect \HasChildren) "/" "testfolder/" 4 OK List completed. 5 list "testfolder" % * LIST (\Noselect \HasChildren) "/" "testfolder" 5 OK List completed. 6 list "testfolder" * * LIST (\Noselect \HasChildren) "/" "testfolder" Thanks, Jonathan

3 5

[Dovecot] Account lockout option?
by dovecot＠corwyn.net 26 Mar '09

26 Mar '09

I'm currently using postfix and dovecot, with dovecot authentication (with saslauthd) using mysql for accounts Is there any option available for me to help inhibit/prevent brute-force login attempts? Thx. Rick Rick Steeves http://www.sinister.net "The journey is the destination"

6 8

[Dovecot] Using Checkpassword with a PHP script
by Muhammed Alat 26 Mar '09

26 Mar '09

Hi, im a newbee using dovecot. I want to use checkpassword, but i've no idea how to use it. Can somebody post a script where i can see how to include a PHP file to verify the password and user. Im useing Dovecot 1.0.15 and somebody have canfigure for me Checkpassword. There is an empty checkpassword and checkpassword-reply file and i have no idea what to do with it? Muhammed

3 2

[Dovecot] Missing TMP folder - Dovecot 1.2 Beta3
by Matt Rude 26 Mar '09

26 Mar '09

Recently after upgrading to 1.2 Beta3 from 1.1.13, I started to defer mail. After looking into it deeper, it looks like Dovecot/sieve now asks for a tmp folder in the imap (maildir) folder. Once I added the tmp folder as the logs indicants, the mail was processed normally. I have split my Inbox and imap store to different folder. Looking at what it's trying to do, it looks to me that dovecot/sieve expect the imap directory to be the Inbox. Is this a bug, or intended behaver? # Log output, when requeueing the message in postfix, with mail_debug on ######################################################################### Mar 24 12:02:50 samantha postfix/qmgr[6855]: EB4141237BD: from=<colleen(a)example.com>, size=493284, nrcpt=1 (queue active) Mar 24 12:02:50 samantha dovecot: deliver(jill(a)example.com): Loading modules from directory: /usr/local/lib/dovecot/lda Mar 24 12:02:50 samantha dovecot: deliver(jill(a)example.com): Module loaded: /usr/local/lib/dovecot/lda/lib10_quota_plugin.so Mar 24 12:02:50 samantha dovecot: deliver(jill(a)example.com): Module loaded: /usr/local/lib/dovecot/lda/lib20_expire_plugin.so Mar 24 12:02:50 samantha dovecot: deliver(jill(a)example.com): Module loaded: /usr/local/lib/dovecot/lda/lib90_cmusieve_plugin.so Mar 24 12:02:50 samantha dovecot: deliver(jill(a)example.com): auth input: maildir=example.com/jill@example.com/ Mar 24 12:02:50 samantha dovecot: deliver(jill(a)example.com): auth input: uid=1000 Mar 24 12:02:50 samantha dovecot: deliver(jill(a)example.com): auth input: gid=1000 Mar 24 12:02:50 samantha dovecot: deliver(jill(a)example.com): auth input: quota_rule=*:storage=524288 Mar 24 12:02:50 samantha dovecot: deliver(jill(a)example.com): Quota root: name=User quota backend=maildir args= Mar 24 12:02:50 samantha dovecot: deliver(jill(a)example.com): Quota rule: root=User quota mailbox=* bytes=536870912 messages=0 Mar 24 12:02:50 samantha dovecot: deliver(jill(a)example.com): Quota rule: root=User quota mailbox=Trash bytes=53687091 (10%) messages=0 Mar 24 12:02:50 samantha dovecot: deliver(jill(a)example.com): Quota rule: root=User quota mailbox=Junk bytes=107374182 (20%) messages=0 Mar 24 12:02:50 samantha dovecot: deliver(jill(a)example.com): maildir: data=/var/spool/virtualmailboxes/example.com/jill@example.com/imap/:INBOX=/… Mar 24 12:02:50 samantha dovecot: deliver(jill(a)example.com): maildir++: root=/var/spool/virtualmailboxes/example.com/jill@example.com/imap, index=/var/spool/virtualmailboxes/Indexes/example.com/jill@example.com, control=, inbox=/var/spool/virtualmailboxes/example.com/jill@example.com Mar 24 12:02:50 samantha dovecot: deliver(jill(a)example.com): cmusieve: /var/spool/virtualmailboxes/example.com/jill(a)example.com/dovecot.sieve doesn't exist Mar 24 12:02:50 samantha dovecot: deliver(jill(a)example.com): cmusieve: Using sieve path: /var/spool/sieve/dovecot.sieve Mar 24 12:02:50 samantha dovecot: deliver(jill(a)example.com): cmusieve: Executing script /var/spool/sieve/dovecot.sievec Mar 24 12:02:50 samantha dovecot: deliver(jill(a)example.com): Namespace : Using permissions from /var/spool/virtualmailboxes/example.com/jill(a)example.com/imap: mode=0700 gid=-1 ****** Mar 24 12:02:50 samantha dovecot: deliver(jill(a)example.com): creat(/var/spool/virtualmailboxes/example.com/jill@example.com/imap/tmp/tem… failed: No such file or directory ****** Mar 24 12:02:50 samantha dovecot: deliver(jill(a)example.com): copy: i_stream_read() failed: No such file or directory Mar 24 12:02:50 samantha dovecot: deliver(jill(a)example.com): msgid=<85866319ca18bf9cd994e34fe806c4f5.squirrel(a)mail.mattrude.com>: save failed to INBOX: Internal error occurred. Refer to server log for more information. [2009-03-24 12:02:50] Mar 24 12:02:50 samantha dovecot: deliver(jill(a)example.com): sieve runtime error: Keep: Generic Error Mar 24 12:02:50 samantha dovecot: deliver(jill(a)example.com): sieve_execute_bytecode(/var/spool/sieve/dovecot.sievec) failed Mar 24 12:02:50 samantha postfix/pipe[3116]: EB4141237BD: to=<jill(a)example.com>, relay=dovecot, delay=540, delays=540/0.03/0/0.14, dsn=4.3.0, status=deferred (temporary failure. Command output: Internal error occurred. Refer to server log for more information. [2009-03-24 12:02:50] ) ############################################################### # dovecot -n # 1.2.beta3: /usr/local/etc/dovecot.conf # OS: Linux 2.6.27.19-170.2.35.fc10.i686 i686 Fedora release 10 (Cambridge) ext3 protocols: imap imaps pop3 pop3s listen(default): *:143 listen(imap): *:143 listen(pop3): * ssl_listen(default): *:993 ssl_listen(imap): *:993 ssl_listen(pop3): ssl_cert_file: /etc/postfix/SSL/mail.example.com.cert ssl_key_file: /etc/postfix/SSL/mail.example.com.key login_dir: /usr/local/var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_user: postfix mail_location: maildir:/var/spool/virtualmailboxes/%d/%u/imap/:INBOX=/var/spool/virtualmailboxes/%d/%u/:INDEX=/var/spool/virtualmailboxes/Indexes/%d/%u/ mail_debug: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugins(default): autocreate expire quota imap_quota zlib trash mail_plugins(imap): autocreate expire quota imap_quota zlib trash mail_plugins(pop3): quota expire mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 auth default: mechanisms: plain login cram-md5 cache_size: 128 cache_ttl: 600 passdb: driver: sql args: /etc/dovecot-mysql.conf userdb: driver: sql args: /etc/dovecot-mysql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: virtualmail group: virtualmail plugin: autocreate: Drafts autocreate2: Sent autocreate3: Trash autocreate4: Junk autocreate5: Junk.IsSpam autocreate6: Junk.IsNotSpam autosubscribe: Drafts autosubscribe2: Sent autosubscribe3: Trash autosubscribe4: Junk autosubscribe5: Junk.IsSpam autosubscribe6: Junk.IsNotSpam expire: Trash 30 Junk 30 expire_dict: proxy::expire quota: maildir:User quota quota_rule: *:storage=10M quota_rule2: Trash:storage=10%% quota_rule3: Junk:storage=20%% sieve: /var/spool/virtualmailboxes/%d/%u/dovecot.sieve sieve_storage: = /var/spool/virtualmailboxes/%d/%u/ trash: /etc/dovecot-trash.conf dict: expire: db:/var/spool/imap/expire.db Thanks -Matt -- Matt Rude http://www.mattrude.com - wiki: http://wiki.mattrude.com

2 1

[Dovecot] deliver command line options "visible" in sieve script
by Andrzej Adam Filip 25 Mar '09

25 Mar '09

I use dovecot mailbox as destination of fetches from a few POP mailboxes. I would like to pass name of "source mailbox" to sieve script via deliver's command line option(s). As I understand I should use -a "mailbox@domain". How it would be accessible in sieve script? -- [pl>en: Andrew] Andrzej Adam Filip : anfi(a)onet.eu It is always the best policy to tell the truth, unless, of course, you are an exceptionally good liar. -- Jerome K. Jerome

1 0

[Dovecot] sqlite 3.6.11
by William E. Moreno A. 25 Mar '09

25 Mar '09

sqlite 3.6.11 doesn´t update from portmanager -u -l, conflicts with apache 2.2.11_3 and dovecot-1.1.11 on FreeBSD 7.1 I unselect into make config window the option to apache and dovecot and make deinstall reinstall, until sqlite fixed the dependence. am I OK? William P.D.: El presente correo no contiene tildes para evitarle al receptor inconvenientes en su lectura. ¡Sé el Bello 51 de People en Español! ¡Es tu oportunidad de Brillar! Sube tus fotos ya. http://www..51bello.com/

1 0

[Dovecot] Dbox Upgrade Problem With MAILBOXDIR
by Alan Swanson 25 Mar '09

25 Mar '09

Hi. Trying to upgrade from Dovecot 1.1.11 to 1.1.13 but having a problem with imap process segfaulting. Backtrace is below. I presume it's related to these MAILBOXDIR changes but the only documentation is the single line in the news for changing to ":MAILBOXDIR=mailboxes" when using dbox. Current configuration is "mail_location = dbox:~/Mail" so what exactly should be changed here? (gdb) bt full #0 0x08093546 in dbox_get_list_settings (list_set=0xafe33244, data=0xafe34e33 "/home/USER/Mail", flags=MAIL_STORAGE_FLAG_NO_AUTODETECTION, layout_r=0xafe331e0, alt_dir_r=0xafe331dc, error_r=0xafe33304) at dbox-storage.c:76 subs_fname = 0x810fd7c "subscriptions" debug = false #1 0x08093615 in dbox_create (_storage=0x9405d08, data=0xafe34e33 "/home/USER/Mail", error_r=0xafe33304) at dbox-storage.c:103 storage = (struct dbox_storage *) 0x9405d08 list_set = {root_dir = 0x93fc038 "/home/USER/Mail", index_dir = 0x0, control_dir = 0x0, inbox_path = 0x0, subscription_fname = 0x810fd7c "subscriptions", maildir_name = 0x810fd8d "dbox-Mails", mailbox_dir_name = 0x0, mail_storage_flags = 0x0, lock_method = 0x0} st = {st_dev = 12674028786447048160, __pad1 = 61096, __st_ino = 155213040, st_mode = 135297936, st_nlink = 2950902296, st_uid = 135192819, st_gid = 155213040, st_rdev = 0, __pad2 = 20, st_size = -6340927589388910560, st_blksize = -1344064952, st_blocks = 666635824201130632, st_atim = {tv_sec = 20, tv_nsec = -1344064952}, st_mtim = {tv_sec = 135387904, tv_nsec = 1}, st_ctim = {tv_sec = 1, tv_nsec = 155213040}, st_ino = 34514951600} layout = 0x810fd8a "fs" alt_dir = 0x0 #2 0x080b1f12 in mail_storage_create (ns=0x9405900, driver=0x93fc030 "dbox", data=0xafe34e33 "/home/USER/Mail", user=0xafe34830 "USER", flags=MAIL_STORAGE_FLAG_NO_AUTODETECTION, lock_method=FILE_LOCK_METHOD_FCNTL, error_r=0xafe33304) at mail-storage.c:224 storage_class = (struct mail_storage *) 0x8128be0 storage = (struct mail_storage *) 0x9405d08 classes = (struct mail_storage * const *) 0xafe332a0 home = 0xa8007ff4 "|�\024" value = 0x2 <Address 0x2 out of bounds> i = 0 count = 1 #3 0x080b0815 in mail_namespaces_init (pool=0x94058e8, user=0xafe34830 "USER", namespaces_r=0xafe33360) at mail-namespace.c:230 namespaces = (struct mail_namespace *) 0x0 ns = (struct mail_namespace *) 0x9405900 ns_p = (struct mail_namespace **) 0xafe33310 flags = 0 lock_method = FILE_LOCK_METHOD_FCNTL mail = 0xafe34e2e "dbox:/home/USER/Mail" data = 0x0 error = 0x0 i = 1 #4 0x0806c373 in main_init () at main.c:238 client = (struct client *) 0x0 ns = (struct mail_namespace *) 0x49c953ed user = 0xafe34830 "USER" str = 0x0 #5 0x0806c59a in main (argc=1, argv=0xafe33434, envp=0xafe3343c) at main.c:296 No locals. (gdb) -- Alan. "One must never be purposelessnessnesslessness."

2 2

[Dovecot] selection correct auth with multiple auth methods
by jm 25 Mar '09

25 Mar '09

How do you control which socket or authentication process dovecot's pop3 daemon chooses to use? I've got a user database with two flags one to allow pop3 access and the other to allow the use of auth smtp. There are two authentication instances configed, thus, auth default { .... passdb sql { args = /etc/dovecot-sql-postfix.conf } .... socket listen { master { path = /var/run/dovecot/auth-master mode = 0660 user = group = } } auth postfix { ..... passdb sql { args = /etc/dovecot-sql-postfix.conf } .... socket listen { client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } } } From the logs and testing pop3 is using the postfix authentication instance and not the default as expected. Does anyone out there know how control dovecot's pops daemon authentication choice? This infomation seems to be lacking in the documentation I can find. Jeff.

2 2