- dovecot - dovecot.org

[Dovecot] 2.1.1: doveadm backup errors
by e-frog 15 Mar '12

15 Mar '12

Hello Timo, I'm experimenting with 'doveadm backup' on 2.1.1 (latest hg, full dovecot -n output attached) and haven't managed to get it working. This is what I have done: 1. Create the directory /tmp/backup which is empty 2. Run doveadm -v backup -u testuser(a)ubuntu-test.localdomain mdbox:/tmp/backup/ Then I see the following errors: doveadm -v backup -u testuser(a)ubuntu-test.localdomain mdbox:/tmp/backup/ dsync(testuser(a)ubuntu-test.localdomain): Error: Can't delete mailbox INBOX: INBOX can't be deleted. dsync(testuser(a)ubuntu-test.localdomain): Info: INBOX: only in dest (guid=9e4b88178b905f4f456e0000381555a6) dsync(testuser(a)ubuntu-test.localdomain): Info: INBOX: only in source (guid=bd05451f2fbb574d40600000ec8d17cd) dsync(testuser(a)ubuntu-test.localdomain): Error: Trying to open a non-listed mailbox with guid=9e4b88178b905f4f456e0000381555a6 dsync(testuser(a)ubuntu-test.localdomain): Error: msg iteration failed: Couldn't open mailbox 9e4b88178b905f4f456e0000381555a6 dsync(testuser(a)ubuntu-test.localdomain): Error: Trying to open a non-listed mailbox with guid=9e4b88178b905f4f456e0000381555a6 dsync(testuser(a)ubuntu-test.localdomain): Error: Mailbox INBOX changed its GUID (bd05451f2fbb574d40600000ec8d17cd -> 9e4b88178b905f4f456e0000381555a6) dsync(testuser(a)ubuntu-test.localdomain): Error: msg iteration failed: Couldn't open mailbox bd05451f2fbb574d40600000ec8d17cd dsync(testuser(a)ubuntu-test.localdomain): Error: Mailbox INBOX changed its GUID (bd05451f2fbb574d40600000ec8d17cd -> 9e4b88178b905f4f456e0000381555a6) It somehow finds INBOX in destination however the backup directory is newly created and empty. Thanks, e-frog

2 5

[Dovecot] Multiple locations, 2 servers - planning questions...
by Charles Marcus 15 Mar '12

15 Mar '12

Hello all/Timo, Up until now, my main Clients office has consisted of a single location, and I have never had to deal with the situation of multiple locations for a single company. They have just told me that they are acquiring an additional floor at a building that is about 4 minutes away - but obviously far enough away that I now have to deal with supporting users in the same domain but at two disparate physical locations. These two locations will be connected via a private Gb ethernet connection, and each location will have its own internet connection (I think - still waiting on some numbers to present to the owner to see what he wants to do in that regard, but that will be my recommendation), so bandwidth for replication won't be an issue. I have a couple of months to get this done, and I am already planning on hiring Timo's new commercial support company to help with the final and actual design and implementation, but obviously first I need to know what my actual options are. Just a rough idea of what I'd like to do is: 1. Set up one dovecot server at each location (these will be VMs), so users at each location are accessing the local server for that office 2. Full replication between the two for the mail/indexes, and configure them such that each can act as a failover for the other in case one goes down for whatever reason This is my first/main question... I recall that 'dsync based replication' is actually on the map for 2.1, but, since apparently dsync can't do this now, Timo, do you have even a rough idea how much work this would be to get it working for only 2 locations (assuming it *may* be easier to get the initial support for only 2 locations, my client may be willing to pay for it if it isn't a huge amount - feel free to reply privately to this question), then you could revisit it later to make it more scalable? Or, if it is going to take more work than my client is willing to pay for (I'm hoping not, since you said it was on the map for 2.1, not 2.2+), maybe the notify plugin could be leveraged in some way to provide something 'close enough' until it is fully implemented in dsync? On that note (something 'close enough' until dsync fully supports this natively), would setting up a dsync cron job, say, every 5 or 10 minutes, be asking for trouble? Our mail server is not all that busy, really, so in 5 or 10 minutes, there wouldn't be many changes at all. If that is not recommended, although I want to avoid the hassles of NFS if at all possible, maybe there is another shared filesystem that will work ok - or... since I will be forcing users to a single server always anyway, maybe NFS or some other shared filesystem is really the best option here, and just let it take care of the syncing? and 3. Configure things such that each offices users are directed to the local server for that office, but connections will fail-over to the remote server in the case of one of them going down for whatever reason? I'm fairly sure that some combination of Dovecot Proxy/Director will accomplish this, but one concern is - for internal users, my understanding is it will redirect them via the private IP, but that would result in lots of traffic across the Gb connection between the two locations, and I'd like to eliminate that if possible - so how will this work when they are accessing it from outside the office, where each office has its own public IP? I'd prefer to not rely on users using the correct hostname (currently, we just use 'mail.example.com', and I know I could set up two new ones - office1.example.com and office2.example.com - but then I'd be relying on the users to get it right, and I'd prefer to avoid that can of worms). I guess a worst case scenario (if there is no better way) would be to do it that way, then watch the logs for users who get it wrong and are using the inter-office connection, and deal with them on a case by case basis. Thanks to any/all for reading this far and for any thoughts, suggestions and/or ideas... -- Best regards, Charles

9 19

[Dovecot] director lmtp -> smtp problem
by Jim Lawson 15 Mar '12

15 Mar '12

Hi Timo & Dovecot users, We have a 2-node director setup which front-ends for 4 nodes which share a clustered filesystem (GFS). All nodes run Dovecot 2.0.18. Approximately 40k users, but typically only a few thousand active at any time. The director nodes run sendmail, which deliver mail "locally" using LMTP to the director, which then feeds to SMTP on the real servers (also sendmail.) Why sendmail? Because procmail is used for mail filtering and as the delivery agent. Here's the problem, on the director: Mar 14 20:40:08 imapdir2 dovecot: lmtp(10692): Connect from local Mar 14 20:40:38 imapdir2 dovecot: lmtp(10692): Panic: file lmtp-proxy.c: line 376 (lmtp_proxy_output_timeout): assertion failed: (proxy->data_input ->eof) Mar 14 20:40:38 imapdir2 dovecot: lmtp(10692): Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(+0x3d99a) [0x7f79156c499a] -> /usr/lib/doveco t/libdovecot.so.0(+0x3d9e6) [0x7f79156c49e6] -> /usr/lib/dovecot/libdovecot.so.0(i_error+0) [0x7f791569df8f] -> dovecot/lmtp() [0x406e77] -> /usr/l ib/dovecot/libdovecot.so.0(io_loop_handle_timeouts+0xd4) [0x7f79156d0044] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x5b) [0x7f79156d 0c3b] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_run+0x28) [0x7f79156cfca8] -> /usr/lib/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f7915 6bdfc3] -> dovecot/lmtp(main+0x154) [0x403f84] -> /lib64/libc.so.6(__libc_start_main+0xfd) [0x7f7914ef8cdd] -> dovecot/lmtp() [0x403d69] Mar 14 20:40:38 imapdir2 sendmail[6905]: q2D8KodI018432: SYSERR(root): timeout writing message to localhost: Broken pipe Most mail goes through OK, but some messages do not and end up queued until they run into the queue time limit. So far as I have been able to tell, all of the messages have this failure when the following conversation takes place between sendmail (on director), the Dovecot LMTP proxy, and sendmail on the backend node (SMTP): (names mangled to protect the guilty) (first, sendmail -> director LMTP) > [root@imapdir2 ~]# sendmail -qIq2EFZt1p004708 -v > > Running /var/spool/mqueue/qd2/q2EFZt1p004708 (sequence 1 of 1) > <ntssdfwe(a)pobox2.uvm.edu>... Connecting to > /var/lib/dovecot/lmtp-socket via cyrusv2... > 220 imapdir2.uvm.edu Dovecot LMTP ready > >>> LHLO imapdir2.uvm.edu > 250-imapdir2.uvm.edu > 250-8BITMIME > 250-ENHANCEDSTATUSCODES > 250 PIPELINING > >>> MAIL From:<owner-dasfqeiuasd*Abrasf*-Gorpwe**UVM*-EDU(a)LIST.UVM.EDU> > 250 2.1.0 OK > >>> RCPT To:<ntssdfwe> > >>> DATA > 250 2.1.5 OK > 354 OK > timeout writing message to localhost: Broken pipe > <ntssdfwe(a)pobox2.uvm.edu>... Deferred > Closing connection to localhost The conversation between the director (LMTP) and the backend (sendmail SMTP) goes like this: > 250-penguinc.uvm.edu Hello imapdir2.uvm.edu [132.198.100.150], pleased > to meet you > 250-ENHANCEDSTATUSCODES > 250-PIPELINING > 250-8BITMIME > 250-SIZE 10485760 > 250-ETRN > 250-AUTH DIGEST-MD5 CRAM-MD5 > 250-DELIVERBY > 250 HELP > MAIL FROM:<owner-dasfqeiuasd*Abrasf*-Gorpwe**UVM*-EDU(a)LIST.UVM.EDU> > 250 2.1.0 <owner-dasfqeiuasd*Abrasf*-Gorpwe**UVM*-EDU(a)LIST.UVM.EDU>... > Sender ok > RCPT TO:<ntssdfwe> > 552 5.2.2 User ntssdfwe mailbox is full At this point Dovecot should return the failed RCPT TO: status back to sendmail over LMTP, but instead it sits there (waiting for a timeout to expire?) and eventually dies. doveconf -n output: # 2.0.18: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-220.4.2.el6.x86_64 x86_64 Red Hat Enterprise Linux Server release 6.2 (Santiago) base_dir = /var/run/dovecot/ default_client_limit = 6000 default_process_limit = 10240 director_mail_servers = penguina.uvm.edu penguinb.uvm.edu penguinc.uvm.edu penguind.uvm.edu director_servers = imapdir1.uvm.edu imapdir2.uvm.edu lmtp_proxy = yes login_trusted_networks = [REDACTED] passdb { args = proxy=y nopassword=y protocol=smtp driver = static } service anvil { client_limit = 40000 } service auth { client_limit = 45960 unix_listener auth-userdb { group = mail mode = 0660 user = dovecot } } service director { fifo_listener login/proxy-notify { mode = 0666 } inet_listener { port = 9090 } unix_listener director-userdb { mode = 0600 } unix_listener login/director { mode = 0666 } } service imap-login { executable = imap-login director service_count = 0 } service imap { process_limit = 10240 vsz_limit = 1 G } service lmtp { client_limit = 1 inet_listener lmtp { port = 24 } unix_listener /var/lib/dovecot/lmtp-socket { group = root mode = 0600 user = root } } service pop3-login { executable = pop3-login director service_count = 0 } service pop3 { process_limit = 5000 } shutdown_clients = no ssl_cert = <[REDACTED].pem ssl_key = <[REDACTED].key userdb { driver = passwd } verbose_proctitle = yes version_ignore = yes protocol lmtp { auth_socket_path = director-userdb } protocol imap { mail_max_userip_connections = 100 } Hope you can help, Jim Lawson

2 6

[Dovecot] v2.0.19 released
by Timo Sirainen 15 Mar '12

15 Mar '12

http://dovecot.org/releases/2.0/dovecot-2.0.19.tar.gz http://dovecot.org/releases/2.0/dovecot-2.0.19.tar.gz.sig Hopefully one of the last v2.0.x releases. - IMAP: ENABLE CONDSTORE/QRESYNC + STATUS for a mailbox might not have seen latest external changes to it, like new mails. - imap_id_* settings were ignored before login. - doveadm altmove did too much work sometimes, retrying moves it had already done. - mbox: Fixed accessing Dovecot v1.x mbox index files without errors.

1 0

[Dovecot] sieve.before script is taking preceedence over user defined rules
by Alexis Lelion 15 Mar '12

15 Mar '12

Hello, In my current setup, I have a spam filter upstream that adds a specific header - X-Spam-Level on every incoming mail. Based on this level, the mail will be moved to the user spam folder using sieve by doing "fileinto :create 'spam';" Unfortunately, some legitimate email may end up in this spam folder, so I have kind of a whitelist that performs an explicit keep over specific trusted domains. So, my complete spam filtering rule is : if address :domain :contains "From" ["mycompany.tld", "trusted.tld" ]{ keep; elseif header :contains "X-Spam-Level" ["0","1","2"] { fileinto :create "__spam__"; } This rule is stored in "/var/lib/dovecot/sieve/before.sieve", which is my "sieve_before" file as defined in /etc/dovecot/conf.d/90-sieve.conf This works as expected except that it doesn't take into account users filtering for domains that were matched for the explicit keep. For example, I have the following rule : if address :domain "From" "trusted.tld" { fileinto "trusted" } But mail coming from that domain are still delivered in my mailbox. Is there something I'm missing here? I guess yes, otherwise it would work as I want ^_^ Any help/comment is appreciated Thanks! Alexis

2 4

Re: [Dovecot] doveadm -A stops processing at first uid<first_valid_uid
by Joseph Tam 15 Mar '12

15 Mar '12

On Sun, 4 Mar 2012, Timo Sirainen writes: > > I would like to run various doveadm commands that involves all (mail) users like > > > > doveadm expunge -A mailbox Trash savedbefore 30d > > > > but any doveadm command that uses "-A" to iterate through all users will > > stop processing at the first account with UID<first_valid_uid. > > What userdb are you using? userdb passwd should already skip users that > aren't in the valid range. And what Dovecot version are you using? passwd-file under dovecot 2.0.16. > And one more thing: Does it really even stop there? Looking at the code > it's supposed to log an error and continue to next user. Note that it says > "Failed to iterate through SOME users". The wording did not escape my notice, which is why I suspect it's not doing what it was designed to do. This is my test: # Command doveadm mailbox list -A # Start of password file sysdaemon:*:500:500:System daemon:/:/dev/null ... and the rest ... # dovecot.conf ... first_valid_uid = 10000 first_valid_gid = 10000 ... In this situation, doveadm will exit immediately with an UID error message. If I change the UID>10000, it will produce the analogous GID error message. If I satify both UID and GID constraints, it will fail on the next daemon entry. If I move the sysdaemon entry all the way to the bottom of the pasword file, I get user1 saved-messages user1 sent-mail user1 postponed-msgs user1 temp user1 temp/temp user1 INBOX user2 sent-mail user2 101 user2 345 user2 ckf ... all user's mailbox with UID>10000, then ... doveadm(sysdaemon): Error: user sysdaemon: Couldn't drop privileges: Mail access for users with UID 500 not permitted (see first_valid_uid in config file, uid from userdb lookup). doveadm(sysdaemon): Error: User init failed doveadm: Error: Failed to iterate through some users > Oh, it says about first_valid_gid. Is sysdaemon's UID within valid range? Sorry for this error mismatch -- I cut&pasted the wrong test output; however, the problem I witnessed applies to both UID and GID (if either constraint is not met, user iteration terminates). > I also added this today: http://hg.dovecot.org/dovecot-2.1/rev/85a8d582d37f It looks like I'll be upgrading. Oh, I just spotted this in the ChangeLog -- maybe you are undoing this? (2010-10-21) * src/auth/auth-settings.c, src/auth/auth-settings.h, src/auth/userdb- passwd.c: auth: userdb passwd iteration now lists only users within first_valid_uid..last_valid_uid range. [745ef289b0ea] Joseph Tam <jtam.home(a)gmail.com>

2 1

[Dovecot] Shared folder prefix listed multiple times with dovecot 2.1.1
by Markus Petri 15 Mar '12

15 Mar '12

Hi, after upgrading from 2.0.18 to 2.1.1 I noticed that I could not use shared folders with mutt anymore. 2.1 lists the shared namespace prefix once per user sharing an folder in LIST "" "%". I also noticed, that with 2.1 the user folder (Shared/<username>) is no longer tagged as \NoSelect. Is this the intended behaviour and mutt simply cannot cope with it or is it a dovecot problem? Here an example with three users sharing a folder to the logged in user with Dovecot 2.1.1: 2 LIST "" "*" * LIST (\HasNoChildren) "/" "INBOX" * LIST (\HasChildren) "/" "Shared/test" * LIST (\HasNoChildren) "/" "Shared/test/Share" * LIST (\HasChildren) "/" "Shared/test2" * LIST (\HasNoChildren) "/" "Shared/test2/Share2" * LIST (\HasChildren) "/" "Shared/test3" * LIST (\HasNoChildren) "/" "Shared/test3/Share3" 2 OK List completed. 2 LIST "" "%" * LIST (\HasNoChildren) "/" "INBOX" * LIST (\Noselect \HasChildren) "/" "Shared" * LIST (\Noselect \HasChildren) "/" "Shared" * LIST (\Noselect \HasChildren) "/" "Shared" 2 OK List completed. The same three users and config with Dovecot 2.0.18: 2 LIST "" "*" * LIST (\HasNoChildren) "/" "INBOX" * LIST (\Noselect \HasChildren) "/" "Shared/test" * LIST (\Noselect \HasChildren) "/" "Shared/test2" * LIST (\Noselect \HasChildren) "/" "Shared/test3" * LIST (\HasNoChildren) "/" "Shared/test/Share" * LIST (\HasNoChildren) "/" "Shared/test2/Share2" * LIST (\HasNoChildren) "/" "Shared/test3/Share3" 2 OK List completed. 2 LIST "" "%" * LIST (\HasNoChildren) "/" "INBOX" * LIST (\Noselect \HasChildren) "/" "Shared" 2 OK List completed. Markus # 2.1.1: /opt/dovecot-2.1/etc/dovecot/dovecot.conf # OS: Linux 3.2.0-1-amd64 x86_64 Debian wheezy/sid auth_mechanisms = plain login disable_plaintext_auth = no listen = 192.168.56.11 mail_location = maildir:~/Maildir mail_plugins = acl managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace { inbox = yes location = prefix = separator = / subscriptions = yes type = private } namespace { inbox = no list = children location = maildir:%%h/Maildir:INDEX=~/Maildir/index/shared/%%u prefix = Shared/%%u/ separator = / subscriptions = no type = shared } passdb { args = /opt/dovecot-2.1/etc/dovecot/passwd driver = passwd-file } plugin { acl = vfile acl_anyone = allow acl_shared_dict = file:/var/lib/vdovecot/shared-mailboxes.db } protocols = imap service auth { unix_listener auth-userdb { mode = 0600 user = vdovecot } } ssl = no userdb { args = /opt/dovecot-2.1/etc/dovecot/passwd driver = passwd-file } verbose_proctitle = yes protocol imap { mail_plugins = acl imap_acl }

2 3

Re: [Dovecot] Dovecot 2.1 with custom OpenSSL fails to build
by Andreas M. Kirchwitz 15 Mar '12

15 Mar '12

Timo Sirainen <tss(a)iki.fi> wrote: >> There seems to be a new dependency in some modules (eg, lib-storage, >> libdovecot-lda, libdovecot-ssl) on OpenSSL. In Dovecot 2.0, those >> modules didn't require OpenSSL, but 2.1 does. >> >> For the linking process the path to the OpenSSL library isn't >> specified properly (SSL_LIBS). Dovecot fails to build if OpenSSL >> is in a non-standard path. (Haven't checked if SSL_CFLAGS isn't >> properly used as well.) > > Maybe http://hg.dovecot.org/dovecot-2.1/rev/c07415305d9e fixes > everything? That's the way to go. Makes things better, but I've found three more dependencies. This patch is against the daily snapshot 20120228. (Sorry for the changes to Makefile.in which you won't need. But this way I don't have to rebuild Makefile.in from Makefile.am when compiling. ;-) diff -ur dovecot-20120228.original/src/auth/Makefile.am dovecot-20120228/src/auth/Makefile.am --- dovecot-20120228.original/src/auth/Makefile.am 2012-02-26 04:00:02.000000000 +0100 +++ dovecot-20120228/src/auth/Makefile.am 2012-02-29 01:38:41.000000000 +0100 @@ -167,7 +167,7 @@ libauthdb_imap_la_LIBADD = \ ../lib-imap-client/libimap_client.la \ ../lib-ssl-iostream/libssl_iostream.la \ - $(LIBDOVECOT) + $(LIBDOVECOT) $(SSL_LIBS) libauthdb_imap_la_CPPFLAGS = \ $(AM_CPPFLAGS) \ -I$(top_srcdir)/src/lib-imap \ diff -ur dovecot-20120228.original/src/auth/Makefile.in dovecot-20120228/src/auth/Makefile.in --- dovecot-20120228.original/src/auth/Makefile.in 2012-02-28 04:00:12.000000000 +0100 +++ dovecot-20120228/src/auth/Makefile.in 2012-02-29 01:38:44.000000000 +0100 @@ -499,7 +499,7 @@ libauthdb_imap_la_LIBADD = \ ../lib-imap-client/libimap_client.la \ ../lib-ssl-iostream/libssl_iostream.la \ - $(LIBDOVECOT) + $(LIBDOVECOT) $(SSL_LIBS) libauthdb_imap_la_CPPFLAGS = \ $(AM_CPPFLAGS) \ diff -ur dovecot-20120228.original/src/lib-storage/Makefile.am dovecot-20120228/src/lib-storage/Makefile.am --- dovecot-20120228.original/src/lib-storage/Makefile.am 2012-02-10 04:00:02.000000000 +0100 +++ dovecot-20120228/src/lib-storage/Makefile.am 2012-02-29 01:38:21.000000000 +0100 @@ -85,7 +85,7 @@ pkglib_LTLIBRARIES = libdovecot-storage.la libdovecot_storage_la_SOURCES = -libdovecot_storage_la_LIBADD = $(shlibs) $(MODULE_LIBS) +libdovecot_storage_la_LIBADD = $(shlibs) $(MODULE_LIBS) $(SSL_LIBS) libdovecot_storage_la_DEPENDENCIES = $(shlibs) libdovecot_storage_la_LDFLAGS = -export-dynamic diff -ur dovecot-20120228.original/src/lib-storage/Makefile.in dovecot-20120228/src/lib-storage/Makefile.in --- dovecot-20120228.original/src/lib-storage/Makefile.in 2012-02-28 04:00:15.000000000 +0100 +++ dovecot-20120228/src/lib-storage/Makefile.in 2012-02-29 01:38:21.000000000 +0100 @@ -397,7 +397,7 @@ pkglib_LTLIBRARIES = libdovecot-storage.la libdovecot_storage_la_SOURCES = -libdovecot_storage_la_LIBADD = $(shlibs) $(MODULE_LIBS) +libdovecot_storage_la_LIBADD = $(shlibs) $(MODULE_LIBS) $(SSL_LIBS) libdovecot_storage_la_DEPENDENCIES = $(shlibs) libdovecot_storage_la_LDFLAGS = -export-dynamic test_programs = \ diff -ur dovecot-20120228.original/src/login-common/Makefile.am dovecot-20120228/src/login-common/Makefile.am --- dovecot-20120228.original/src/login-common/Makefile.am 2011-11-09 04:00:01.000000000 +0100 +++ dovecot-20120228/src/login-common/Makefile.am 2012-02-29 01:38:21.000000000 +0100 @@ -40,6 +40,6 @@ pkglib_LTLIBRARIES = libdovecot-login.la libdovecot_login_la_SOURCES = -libdovecot_login_la_LIBADD = liblogin.la ../lib-ssl-iostream/libssl_iostream.la ../lib-dovecot/libdovecot.la +libdovecot_login_la_LIBADD = liblogin.la ../lib-ssl-iostream/libssl_iostream.la ../lib-dovecot/libdovecot.la $(SSL_LIBS) libdovecot_login_la_DEPENDENCIES = liblogin.la libdovecot_login_la_LDFLAGS = -export-dynamic diff -ur dovecot-20120228.original/src/login-common/Makefile.in dovecot-20120228/src/login-common/Makefile.in --- dovecot-20120228.original/src/login-common/Makefile.in 2012-02-28 04:00:18.000000000 +0100 +++ dovecot-20120228/src/login-common/Makefile.in 2012-02-29 01:38:21.000000000 +0100 @@ -320,7 +320,7 @@ pkginc_lib_HEADERS = $(headers) pkglib_LTLIBRARIES = libdovecot-login.la libdovecot_login_la_SOURCES = -libdovecot_login_la_LIBADD = liblogin.la ../lib-ssl-iostream/libssl_iostream.la ../lib-dovecot/libdovecot.la +libdovecot_login_la_LIBADD = liblogin.la ../lib-ssl-iostream/libssl_iostream.la ../lib-dovecot/libdovecot.la $(SSL_LIBS) libdovecot_login_la_DEPENDENCIES = liblogin.la libdovecot_login_la_LDFLAGS = -export-dynamic all: all-am

2 3

[Dovecot] .mailboxlist -> .subscriptions
by Steve Campbell 15 Mar '12

15 Mar '12

I've mostly finished a conversion from an old Centos 3 UW-Imap server to a new Centos 6 dovecot server. I did not copy the old ~/.mailboxlist file to ~/mail/.subscriptions file, but notice some users have the latter file now. These are all mbox folders on the old and new server. I'm getting ready to do the same to another old/new pair of servers and I'm wondering if there is an advantage of doing the copy. I'm assuming the .subscription files are created when they access their account through our webmail application, but I'm not sure if it was automatic or due to a "subscribe" action done manually. There are 49 accounts with a .mailboxlist file and only 4 with the new .subscriptions file. So either our webmail application isn't being used a lot or there's a problem with it due to the missing .subscriptions file, but the phone usually rings pretty quickly when problems arise. One last question, please. Over the years, some imap accounts had their folders directly in their home directory and the contents of the .mailboxlist file would have an entry with just the name of the folder in it (Trash, eg), and most had the folders in their ~/mail folder with an entry like "mail/Trash". Our webmail app, Horde/Imp, always seemed to take care of this. If I create the .subscription file for the users during the move to the new server, should I move the folders to the mail directory and amend their .subscriptions file to reflect that change on these odd ball accounts, and will that affect how their client is seeing these? The first server conversion was a bear due to my lack of dovecot knowledge. I've since learned a little more, and mostly found out that dovecot is a more complex application than the old imap application. There's so much more that can be done with dovecot, whereas the old imap server was mostly just load-and-go. Seems like no matter how much I read, the more I discovered I didn't know. Anyway, thanks for all the past help and any opinions anyone might decide to offer on this post. steve campbell

3 6

[Dovecot] 2.1: timeout waiting for lock?
by Ralf Hildebrandt 15 Mar '12

15 Mar '12

Mar 15 09:46:11 postamt dovecot: pop3(username): Error: Couldn't open INBOX: Timeout while waiting for lock Mar 15 09:46:11 postamt dovecot: pop3(username): Couldn't open INBOX top=0/0, retr=0/0, del=0/0, size=0 Mar 15 09:47:26 postamt dovecot: pop3(username): Error: Couldn't open INBOX: Timeout while waiting for lock Mar 15 09:47:26 postamt dovecot: pop3(username): Couldn't open INBOX top=0/0, retr=0/0, del=0/0, size=0 Mar 15 09:51:01 postamt dovecot: pop3(username): Error: Couldn't open INBOX: Timeout while waiting for lock Mar 15 09:51:01 postamt dovecot: pop3(username): Couldn't open INBOX top=0/0, retr=0/0, del=0/0, size=0 during that time, I wasn't able to access the mailbox using imap. I then issued doveadm kick username and all over sudden the mailbox was accessible (via IMAP) # doveadm kick username kicked connections from the following users: username # /usr/local/scripts/find_abnormal_imap Mar 15 11:38:48 postamt dovecot: imap: Warning: Killed with signal 15 (by pid=24545 uid=0 code=kill) -- Ralf Hildebrandt Geschäftsbereich IT | Abteilung Netzwerk Charité - Universitätsmedizin Berlin Campus Benjamin Franklin Hindenburgdamm 30 | D-12203 Berlin Tel. +49 30 450 570 155 | Fax: +49 30 450 570 962 ralf.hildebrandt(a)charite.de | http://www.charite.de

2 4