- dovecot - dovecot.org

[Dovecot] FOSDEM
by Timo Sirainen 25 Jan '12

25 Jan '12

I'll be in FOSDEM giving a small lightning talk about Dovecot: http://fosdem.org/2012/schedule/event/dovecot I'll also be around in FOSDEM the whole time, so if you're there and want to talk to me about anything, send me an email at some point. Poll to dovecot-news list people: Do you want to see these kind of news about my upcoming talks sent to the list? Probably happens a few times/year. A simple "yes" or "no" reply to this mail privately to me is enough.

2 1

[Dovecot] Dovecot antispam plugint got an empty message
by Petr Bravenec 25 Jan '12

25 Jan '12

Few weeks ago I upgraded dovecot from 1.2 to 2.0.16 and antispam plugin to 2.0_pre20101222. Since the upgrade I'm not able to move messages to my Junk folder. In the maillog I have found this message: dspam[25060]: empty message (no data received) Message is copied from my INBOX to Junk folder, but dspam got an empty message and sent an error return code. So the moving operation is not successfull and the original message in INBOX was not deleted. The dspam was not trained (got an empty message). Looking to source code of dspam and antispam plugin I suspect the dovecot not to sending any content to plugin. Can you help me, please? Petr Bravenec

3 2

Re: [Dovecot] Imap Quota Exceeded - But Still Receiving Emails?
by Daniel L. Miller 25 Jan '12

25 Jan '12

On 1/25/2012 1:39 AM, Palatine Web Support wrote: > On 2012-01-25 05:38, Daniel L. Miller wrote: >> On 1/24/2012 8:35 AM, Palatine Web Support wrote: >>> >>> Here is my dovecot config: >>> >>> plugin { >>> quota = maildir:User Quota >>> quota_rule2 = Trash:storage=+100M >>> } >> [..] >>> >>> So it picks up my set quota of 3MB but dovecot is not rejecting >>> emails if I am over my quota. >>> >>> Can anyone help? >>> >> Is the quota plugin being loaded? What is the output of: >> >> doveconf | grep -B 2 plug > > Hi Daniel > > I tried the command and it returned the command was not found. I have > installed: > > apt-get install dovecot-common > apt-get install dovecot-dev > apt-get install dovecot-imapd > > > Which package does the binary doveconf come from? You need to make sure to reply to the list - not just to me. If you don't have doveconf...what version of Dovecot are you using? -- Daniel

1 0

[Dovecot] move mails from spool to users home dir(maildir formate) automatically
by Arun Gupta 25 Jan '12

25 Jan '12

Hi, I am using dovecot 2.0.16, and assigend globally procmailrc (/etc/procmailrc) which delivers mails to user's home directory in maildir formate. Also I assined quota to User through setquota (edquota) command, If the quota excedded then this case user's mail store to /var/spool/mail/user. After incresing quota how to delivered these mails to user's home dir in maildir formate automatically. Thanks & Regards, Arun Kumar Gupta -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

2 1

[Dovecot] Imap Quota Exceeded - But Still Receiving Emails?
by Palatine Web Support 25 Jan '12

25 Jan '12

Hello I am trying to setup dovecot maildir quota, but even though it seems to be working fine, I am still receiving emails into my inbox even though I have exceeded my quota. Here is my dovecot config: plugin { quota = maildir:User Quota quota_rule2 = Trash:storage=+100M } And my SQL config file for Dovecot (dovecot-sql.conf): user_query = SELECT '/var/vmail/%d/%n' as home, 'maildir:/var/vmail/%d/%n' as mail, 150 AS uid, 8 AS gid, CONCAT('*:storage=', quota) AS quota_rule FROM mailbox WHERE username = '%u' AND active = '1' CONCAT('*:storage=', quota) AS quota_rule quota_rule = *:storage=3M So it picks up my set quota of 3MB but dovecot is not rejecting emails if I am over my quota. Can anyone help? Thanks. Carl

2 1

Re: [Dovecot] change smtp port
by Noel 24 Jan '12

24 Jan '12

On 1/23/2012 8:38 AM, Amira Othman wrote: > And there is no way to receive incoming emails not on port 25 ? > You can't randomly change the port you receive mail on because external MTAs have no way to find what port you're using. They will *always* use port 25 and nothing else. If your problem is that your Internet Service Provider is blocking port 25, you can contact them. Some ISPs will unblock port 25 on request, or might even have an online form you can fill out. If you can't get help from the ISP, you need a remailer service -- some outside proxy that accepts the mail for you and forwards connections to some different port on your computer. I don't know of any free services that do this; dyndns and others offer this for a fee, sometimes combined with spam/virus filtering. -- Noel Jones

4 6

Re: [Dovecot] change smtp port
by Charles Marcus 24 Jan '12

24 Jan '12

On 2012-01-24 7:51 AM, Amira Othman <a.othman(a)cairosource.com> wrote: > Thanks for reply > > The problem that ISP for some reason port 25 is not stable and refuse > connection for several times so I tried to change port to 587 instead > of 25 to keep sending emails. And I though that I can stop using port > 25 as it's not always working from ISP As I said, you obviously do not understand how smtp works. This is made obvious by your questions, and failure to understand that port 25 is *the* port for receiving email on the public internet. Period. If your main problem with port 25 is *sending* (relaying outbound) mails, then you will need to take this up with your ISP. If they are unable or unwilling to address the problem, one option would be to setup your system to relay through some other smtp relay service on the internet using port 587 as you apparently read somwehere, but you don't do this by changing the main smtpd daemon to port 587, because as you discovered, you won't be able to receive *any* emails like this. That said, I fail to see any relevance to dovecot in this thread... -- Best regards, Charles

1 0

[Dovecot] Trying to get metadata plugin working
by Thomas Koch 24 Jan '12

24 Jan '12

Hi, I'm working on a Kolab related project and wanted to use dovecot on my dev machine. However I'm stuck with the metadata-plugin. I "solved" the permissions problems but now I get dict: Error: file dict commit: file_dotlock_open(~/Maildir/shared-metadata) failed: No such file or directory Before that, I had dict { metadata = file:/var/lib/dovecot/shared-metadata but got problems since my normal user had no permission to access /var/lib/dovecot. I compiled the plugin from the most recent commit. My dovecot runs in a chroot. I can login with KMail and can create Groupware (annotated) folders, but the metadata file dict won't get created and I also can't set/get metadata via telnet. doveconf -N # 2.0.15: /etc/dovecot/dovecot.conf # OS: Linux 3.1.0-1-amd64 x86_64 Debian 6.0.3 auth_mechanisms = plain dict { metadata = file:~/Maildir/shared-metadata } mail_access_groups = dovecot mail_location = maildir:~/Maildir mail_plugins = " metadata" passdb { driver = pam } plugin { metadata_dict = proxy::metadata } protocols = " imap" service dict { unix_listener dict { group = dovecot mode = 0666 } } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } protocol imap { mail_plugins = " metadata imap_metadata imap_annotatemore" } Best regards, Thomas Koch, http://www.koch.ro

4 5

[Dovecot] Capabilities of imapc
by René Neumann 24 Jan '12

24 Jan '12

Hi *, I can't find any decent information about the capabilities of imapc in the planned future dovecot releases. As I think about using imapc, I'll just give the two use-cases I see for me. Will this be possible with imapc? 1) One (or more) folders in a mailbox which are proxied? 2) Proxy a whole mailbox _and use the folders in it as shared folders_. That means account X on Server 1 (the dovecot box) is proxied via imapc to Server 2 (some other server). The folders of this account on Server 1 are then shared with account Y. When account Y uses these folders they are always up-to-date (so no action of account X is required). The second use-case is just some (ugly) workaround in case the first one is not possible. Thanks, René

2 2

[Dovecot] dbox + SIS + zlib fixed
by Timo Sirainen 24 Jan '12

24 Jan '12

I think a few people have complained about this combination being somewhat broken, resulting in bogus "cached message size wrong" errors sometimes. This fixes it: http://hg.dovecot.org/dovecot-2.0/rev/9b2931607063

1 0