- dovecot - dovecot.org

Re: [Dovecot] messages downloading repeatedly to mozilla/seamonkey pop3 client
by Ben Julian 10 Mar '08

10 Mar '08

Asheesh, Sorry about the long delay. I tried upgrading to version 1.0.12, which I understood to be the newest release for CentOS 5. I am still experiencing the problem. What should I try next? Thanks, Ben On Wed, Mar 5, 2008 at 5:51 PM, Ben Julian <ben.julian(a)gmail.com> wrote: > Just read "[Dovecot] Problem with Thunderbird hang, multiple retry to > .Sent/.Draft" thread, and I see that I have the same version and > really need to upgrade. I will try that first. > -Ben > > > > On Wed, Mar 5, 2008 at 4:48 PM, Ben Julian <ben.julian(a)gmail.com> wrote: > > output of dovecot -n: > > > > # /etc/dovecot.conf > > login_dir: /var/run/dovecot/login > > login_executable(default): /usr/libexec/dovecot/imap-login > > login_executable(imap): /usr/libexec/dovecot/imap-login > > login_executable(pop3): /usr/libexec/dovecot/pop3-login > > first_valid_uid: 100 > > mail_executable(default): /usr/libexec/dovecot/imap > > mail_executable(imap): /usr/libexec/dovecot/imap > > mail_executable(pop3): /usr/libexec/dovecot/pop3 > > mail_plugin_dir(default): /usr/lib/dovecot/imap > > mail_plugin_dir(imap): /usr/lib/dovecot/imap > > mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 > > pop3_client_workarounds(default): > > pop3_client_workarounds(imap): > > pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh > > auth default: > > passdb: > > driver: pam > > userdb: > > driver: passwd > > > > Version of dovecot: 1.0.rc15 > > Came as the bundled pop3/imap client with CentOS5, version 2.6.18-8.el5 > > > > Thanks Asheesh, > > Ben > > > > > > > > > > On Wed, Mar 5, 2008 at 3:27 PM, Asheesh Laroia <asheesh(a)asheesh.org> wrote: > > > On Wed, 5 Mar 2008, Ben Julian wrote: > > > > > > > All changes resulted in only a brief (1-2hr) cessation of the problem. > > > > > > > > I've subscribed for a month or so now and searched the archives, but > > > > if I missed a solution to this in there, I apologize. > > > > > > That sounds like a drag. Let's see if we can help you. > > > > > > Can you paste the results of dovecot -n into a message? That way we can > > > see your whole configuration. What version of Dovecot are you using, and > > > where did you get it from? > > > > > > (I'm expecting you to tell me you're running some really old version, and > > > I further expect that if you upgrade your woes will go away; but let's > > > see!) > > > > > > -- Asheesh. > > > > > > -- > > > A long-forgotten loved one will appear soon. > > > > > > Buy the negatives at any price. > > > > > >

1 0

[Dovecot] Multiple SSL certs
by Daniel L. Miller 10 Mar '08

10 Mar '08

Does 1.1 support multiple certs? -- Daniel

4 4

[Dovecot] Maildirsize automatically (re)build
by Jan van den Berg 10 Mar '08

10 Mar '08

Hi, Im testing with 1.1RC1. I read here: http://wiki.dovecot.org/Quota/Maildir "If you configure quota limits in Dovecot (e.g. quota=maildir:storage=102400(kilobytes)), Dovecot makes sure that this header is kept up to date. If the file does not exist, it's simply rebuilt." This is my query: password_query = SELECT username as user, username as userdb_user, passwd as password, 1001 as userdb_uid, 1001 as userdb_gid, concat('maildir:storage=', quota, 'M:ignore=Spam\ e\-mail') AS userdb_quotarule, 'Trash:storage=20M' as userdb_quota_rule2 FROM mailboxen WHERE username = '%n' Also in the main config I use: mail_plugins: quota imap_quota plugin: quota: maildir So I use maildir:storage in my config. However when I delete the maildirsize (for testing purposes) it doesn't get automatically recreated? According to the Wiki it should right? Cheers, Jan

3 8

[Dovecot] Sorting by Sender Name
by Daniel Watts 10 Mar '08

10 Mar '08

Dear Timo, Posted this originally to the squirrelmail list but they said that sorting is done server side so concluded I needed to talk to you: ============= I feel there is an error in the logic of the sort by From column. If you sort by this column, the messages are re-ordered in alphabetical order using the *email address* as the sorted word. However most people these days have their clients configured to include a sender's name. For example: Daniel Smith <daniel(a)hotmail.com>. In the message list the name 'Daniel Smith' is then shown, not the email. When sorting by From it should use the name as the sorted element and NOT the email address. If my email was zippydan(a)yahoo.com, my emails, showing as 'Daniel Watts' would come right near the bottom of the list rather than with the other 'D's near the top. I know my email clients (Thunderbird and Outlook) both act like this - using the name if available and if not THEN using (and displaying) the email address. This seems to make the most sense to me. Thanks as always for your attention. Daniel

2 2

[Dovecot] invoking LDA in .forward
by Jeremie Bouttier 10 Mar '08

10 Mar '08

Hi, We're running a Debian server with system users where the mail is by default delivered by postfix and procmail, before being served by Dovecot (mail_location = mbox:~/Mail:INBOX=/var/mail/%u) or read by local MUAs, depending on users' preferences. For people using mostly remote MUAs, it might be interesting to use Dovecot's LDA. I read on http://wiki.dovecot.org/LDA that this is possible using .forward files, however this fails on our system with : file_lock_dotlock() failed with mbox file /var/mail/user: Permission denied (/var/mail is 2775 for root:mail as recently discussed). Is there a possible fix ? I also read that deliver is not designed to be run setuid root, I guess this also applies to being run setgid mail... Regards, Jeremie

2 3

Re: [Dovecot] Wrong message information reported shortly after delivery
by Ron Avriel 09 Mar '08

09 Mar '08

> Thanks, in my previous tests I didn't use quota plugin with deliver > which was needed to notice this. The problem is: > > 1. deliver adds "message appended" to index file > 2. quota plugin runs for a while > 3. deliver updates filename<->uid mapping in dovecot-uidlist > Thanks for the quick answer. Why does it take four seconds (!) from the time dovecot first reports an invalid message information until the correct information is reported? The time is measured for the delivery of a 1KB message to an empty mailbox on a completely idle system. 2008-03-09 17:00:41.449833 Sent 1011 bytes to test1(a)imap4test.com 2008-03-09 17:00:41.472034 No messages in INBOX. Waiting... 2008-03-09 17:00:42.480654 No messages in INBOX. Waiting... 2008-03-09 17:00:43.487617 **** ERROR: Got invalid RFC822.SIZE 0: 1 (FLAGS (\Recent) INTERNALDATE "01-Jan-1970 00:00:00 +0000" RFC822.SIZE 0 UID 63) 2008-03-09 17:00:44.494382 **** ERROR: Got invalid RFC822.SIZE 0: 1 (FLAGS (\Recent) INTERNALDATE "01-Jan-1970 00:00:00 +0000" RFC822.SIZE 0 UID 63) 2008-03-09 17:00:45.501444 **** ERROR: Got invalid RFC822.SIZE 0: 1 (FLAGS (\Recent) INTERNALDATE "01-Jan-1970 00:00:00 +0000" RFC822.SIZE 0 UID 63) 2008-03-09 17:00:46.550623 **** ERROR: Got invalid RFC822.SIZE 0: 1 (FLAGS (\Recent) INTERNALDATE "01-Jan-1970 00:00:00 +0000" RFC822.SIZE 0 UID 63) 2008-03-09 17:00:47.593704 Got valid RFC822.SIZE 1509: 1 (FLAGS (\Recent) INTERNALDATE "09-Mar-2008 17:00:41 +0200" RFC822.SIZE 1509 UID 63) Thanks again, Ron ____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs

1 0

[Dovecot] Quota problems with IMAP and POP?
by Nicolas Letellier 09 Mar '08

09 Mar '08

Hello, I would like to know if it could be appears problem using POP and IMAP in a mailbox? Is it adviced to use one of the two protocols? My users use IMAP to see their emails (in the webmail) and POP3 to download their emails (in outlook/thunderbird). Is it best to use the same protocol? POP and IMAP have the same quota engine? Thanks. -Nicolas

2 2

[Dovecot] 1.1 master auth not expanding static userdb variables
by Andrew Roberts 09 Mar '08

09 Mar '08

Can dovecot-1.1 deliver work with static userdb? I'm currently running dovecot-1.0.12 and postfix-2.4.6, with virtual users' maildirs all owned by vmail and mail_location = maildir:/var/mail/%Lu. The following definition of the dovecot transport in postfix/master.conf works fine with dovecot-1.0: dovecot unix - n n - 1 pipe flags=DRh user=vmail:vmail argv=/usr/libexec/dovecot/deliver \ -d ${user}@${nexthop} -n -m ${extension} Note that I'm not using postfix pipe's "u" flag, since that lowercases everything to the left of "@", including the extension, and we need the extension to be case sensitive. Dovecot is configured with static userdb and args = user=%Lu uid=206 gid=206 home=/var/mailhomes/%Lu, which takes care of making sure the username is lowercase. All of this has been working fine for some time with dovecot-1.0. After upgrading to 1.1_rc2, however, deliver creates a maildir named "%Lu" and delivers all mail for all users to it. Everything else works just fine as before: users can log in, postfix can auth smtp via dovecot sasl, etc. I've tried invoking deliver with -k, adding "mail=maildir:/var/mail/%Lu" to the end of the userdb args, and checked file permissions on the auth sockets, maildirs, and virtual homes. Rolling back to 1.0.12 is the only way I can get deliver to behave as expected. What changed between 1.0 and 1.1 in the way deliver does userdb lookups or how dovecot auth serves to it that could cause this? Does anyone here here have a similar config working with 1.1? Has anyone else observed similar behavior? Thanks, Andrew

3 6

[Dovecot] Update from 1.0.10 -> 1.1rc1 file message-parser.c: line 766 (message_parser_parse_next_block): assertion failed
by Ralf Hildebrandt 09 Mar '08

09 Mar '08

Feb 23 20:40:36 postamt dovecot: IMAP(username): file message-parser.c: line 766 (message_parser_parse_next_block): assertion failed: (ctx->input->eof || ctx->input->closed || ctx->input->stream_errno != 0) Feb 23 20:40:36 postamt dovecot: IMAP(username): Raw backtrace: /usr/local/libexec/dovecot/imap [0x8009236d] -> /usr/local/libexec/dovecot/imap [0x80091ed8] -> /usr/local/libexec/dovecot/imap(message_parser_parse_next_block+0xad) [0x8008ae0d] -> /usr/local/libexec/dovecot/imap(index_mail_cache_parse_continue+0x32) [0x80053ab2] -> /usr/local/libexec/dovecot/imap(index_mail_cache_parse_deinit+0x35) [0x80055295] -> /usr/local/libexec/dovecot/imap(maildir_save_finish+0xdb) [0x80034f9b] -> /usr/local/libexec/dovecot/imap(mailbox_save_cancel+0x1b) [0x8005f6ab] -> /usr/local/libexec/dovecot/imap [0x80015d08] -> /usr/local/libexec/dovecot/imap [0x80015ecd] -> /usr/local/libexec/dovecot/imap(client_command_cancel+0x2a) [0x8001b7ca] -> /usr/local/libexec/dovecot/imap(client_destroy+0x6c) [0x8001c0ac] -> /usr/local/libexec/dovecot/imap [0x8001c893] -> /usr/local/libexec/dovecot/imap(io_loop_handle_timeouts+0xeb) [0x80099ddb] -> /usr/local/libexec/dovecot/imap(io_loop_handler_run+0x93) [0x8009aa03] -> /usr/local/libexec/dove Feb 23 20:40:36 postamt dovecot: IMAP(username): /usr/local/libexec/dovecot/imap(main+0x4ae) [0x80024d6e] -> /lib/i686/cmov/libc.so.6(__libc_start_main+0xe0) [0xb7db7450] -> /usr/local/libexec/dovecot/imap [0x80015be1] Feb 23 20:40:36 postamt dovecot: child 15224 (imap) killed with signal 6 -- Ralf Hildebrandt (Ralf.Hildebrandt(a)charite.de) snickebo(a)charite.de Postfix - Einrichtung, Betrieb und Wartung Tel. +49 (0)30-450 570-155 http://www.arschkrebs.de vista policy violation: Microsoft optical mouse detected penguin patterns on mousepad. Partition scan in progress to remove offending incompatible products. Reactivate MS software.

3 3

[Dovecot] 1.1r1: auth-worker(default): BUG: PASSV had missing parameters, sig11
by Adam McDougall 09 Mar '08

09 Mar '08

I don't know how this happened. I'm not sure if there is a coredump somewhere because I don't know what user, and I have nothing for 'root' or 'dovecot'. Any advice, or should I make all my coredumps go to a central writable directory so I have better chance of catching it if it happens again? Is it maybe from someone connecting to postfix and causing a SMTP-AUTH to timeout? Although that is unlikely because users should not know how to reach this server's SMTP ports. I cut most of the surrounding log entries below because they seemed unrelated normal activity, but two of the lines below I left because of the timestamp. socket: type: listen client: path: /var/spool/postfix/private/auth mode: 384 user: postfix group: postfix Mar 8 17:02:17 boomhauer dovecot: auth-worker(default): BUG: PASSV had missing parameters Mar 8 17:03:47 boomhauer dovecot: auth-worker(default): BUG: PASSV had missing parameters Mar 8 17:05:17 boomhauer dovecot: imap-login: Disconnected: Inactivity: method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured Mar 8 17:05:17 boomhauer dovecot: child 72819 (login) killed with signal 11 Mar 8 17:06:47 boomhauer dovecot: imap-login: Disconnected: Inactivity: method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured Mar 8 17:06:47 boomhauer dovecot: child 72857 (login) killed with signal 11

2 5