- dovecot - dovecot.org

Re: [Dovecot] Compiling with SSL
by Anders 22 Apr '08

22 Apr '08

Tom Ray [Lists] wrote: > Building with SSL support ........... : no > Am I not doing something right? Am I reading the configuration setup wrong? (now with correct sender address for this list) Hi. I would guess that you need to install an openssl-dev development package for whatever your distribution is. cheers Anders.

3 2

[Dovecot] IMAP clients generate user home folders one level higher than needed
by andel 22 Apr '08

22 Apr '08

Hi (Of course not the clinets generate the folders, dovecot does, but I wanted to have the title not be too long.) I am using static userdb: userdb static { args = uid=vmail gid=mail home=/srv/vmail/%d/%n } and I have configured the hostname in protocol lda. Now when mail arrives for a known virtual user, the home directory with all subdirectories is being created correctly unter /srv/vmail/$domain/$vuser. But when connecting from an IMAP client (I have tested Thunderbird and Outlook) a new home directory with apparently correct subfolders is bring created unter /srv/vmail/$vuser ! The connection works, I just don't see the mails which arrived since the client is mapping a directory one level higher than needed. Where do I have to look for the cause? I did not find anything reasonable yet. Thank you in advance, David

2 4

[Dovecot] Compiling with SSL
by Tom Ray [Lists] 22 Apr '08

22 Apr '08

I have Dovecot 1.0.9 running right now and I'm looking to upgrade but at the same time re-compile with SSL support. Dovecot's been working great for me so far. When I try to compile I keep getting this at the end: Building with SSL support ........... : no Building with IPv6 support .......... : yes Building with pop3 server ........... : yes This is what my configure line looks like: ./configure --prefix=/usr/local/dovecot --with-pop3d --with-ssl=openssl --with-ssldir=/usr/local/vps/sharedssl/openssl --with-passwd-file Am I not doing something right? Am I reading the configuration setup wrong? Any help would be great! Thanks.

1 0

[Dovecot] odd behaviour with antispam plugin
by ZyanKLee 22 Apr '08

22 Apr '08

hey, in my dspam database there has been some odd behaviour: during training dspam had created an uid entry named by the local part of the email. i.e.: user1 I use a virtual setup using dovecot, postfix and postfixadmin. On my first try I set up a database for dspam itself and there this happened. After I couldn't figure out how to solve this, I merged the database into the postfixadmin database. But using just the username for identifying email adresses is a bit critical within a virtual environment with multiple domains, isn't it? if one would not merge the databases - how could he solve this problem? Greetz, Zyan K Lee

2 1

[Dovecot] Moving Maildir email messages and backing things up.
by Karl Schmidt 22 Apr '08

22 Apr '08

I just moved to dovecot with Maildir. I think this is probably a stupid question, but I couldn't find an answer after an hour of googling and searching the wiki. What would happen if I ran a script that did this: mv ~/Maildir/.folder_one/cur/* ~/Maildir/.folder_two/cur/ My hunch is it might break things. What if dovecot was stopped? ,.,.,. Where can I find a list of files in ~/Maildir/ and a note on what they are? (And similarly for a ~/Maildir/.folder) I'm wondering if everything needs to be backed up, or if I can/should skip the indexes. What happens if any of these files changes during the backup? (I'm thinking I shouldn't have to stop dovecot for a backup). ---------------------------------------------------------------- Karl Schmidt EMail Karl(a)xtronics.com Transtronics, Inc. WEB http://xtronics.com 3209 West 9th Street Ph (785) 841-3089 Lawrence, KS 66049 FAX (785) 841-0434 "Give me four parameters and I can fit an elephant; Give me five and I can wag its tail." (The source of the above quote?? Variants have been attributed to C.F. Gauss, Niels Bohr, Lord Kelvin, Enrico Fermi.) ----------------------------------------------------------------

3 6

[Dovecot] antispam plugin ehancement
by ML 22 Apr '08

22 Apr '08

I'm not a developper so I can't do it by myself, but I wonder if it could be possible to use tagSpam and tagNospam DSPAM feature to ehance user's dspam lerning experience. I even don't know if this must be done by DSPAM itself or by dovecot, but let me explain : The feature would be done by a signature replacement into tagSpam and tagNospam text, so the user would simply have to click on the link at end of the mail to learn DSPAM : # dspam.conf tagSpam on tagNonspam on # msgtag.spam If this message was classified SPAM by mistake, please click here : http://example.com/dspam-retrain.cgi?sig= {DSPAM_SIG} # msgtag.nonspam If this message should have been classified SPAM, please click here : http://example.com/dspam-retrain.cgi?sig= {DSPAM_SIG} I think a click is easier and faster than a forward, what do you think of such an implementation ? Regards, David.

4 6

[Dovecot] Feature Request - starting dovecot, config file behavior
by Charles Marcus 21 Apr '08

21 Apr '08

Hey Timo, I was wondering how much trouble it would be to again emulate the way postfix does something - in this case, the way it reads its config file when starting up. Current behavior: Postfix: If postfix encounters the same setting defined more than once, the last one wins. Dovecot: If dovecot encounters the same setting defined more than once it gives an error (also when using the 'dovecot -n' command). I like to add all of my changes to the very bottom of the config file, but otherwise leave the config file as is... this makes it very easy when updating - I can easily keep all of the new default config file, and simply merge my customizations at the end. So - how hard would it be to make dovecot simply accept the last defined setting read, instead of refusing to start? Thanks much, and glad to have you back in action! -- Best regards, Charles

4 5

[Dovecot] mailtrain with dovecot antispam plugin
by Hugo Monteiro 21 Apr '08

21 Apr '08

Hello all, and Johannes if you're around, I was trying to set up the "new" antispam plugin with the mailtrain backend, and i was trying to use the sendmail binary that's part of a qmail system. The message wouldn't get sent and i kept getting exit error 100 from the /var/qmail/bin/sendmail binary. To try to figure out what was happening, i mean a fake sendmail program, which is nothing more than a bash script to capture the command call input. The script is rather simple, it just places the calling parameters into a txt file and the stdin into another. code is #!/bin/bash echo $* > /tmp/sendmail-parms.txt exec cat<&0 >> /tmp/sendmail-msg.txt exit 0 So i tried a retrain and went to see what those txt files had. The parms.txt file was fine apparently, with cat /tmp/sendmail-parms.txt i got -f hm(a)hmonteiro.net notspam-hm(a)hmonteiro.net Then i did the same to the message file, with cat /tmp/sendmail-msg.txt, and i got the follwing Return-Path: <hugo.monteiro(a)fct.unl.pt>Delivered-To: hm(a)hmonteiro.net Received: (qmail 21616 invoked from network); 19 Apr 2008 16:21:17 -0000 Received: (simscan 1.4.1 ppid 21609 pid 21611 t 0.1451s) (scanners: regex: 1.4.1 attach: 1.4.1 clamav: 0.92.1 /m:46/d:6803); 19 Apr 0108 16:21:17 -0000 Received: from femme-fatal.resnet.costabasto.com (HELO femme-fatal) (192.168.0.20) by hmonteiro.net with SMTP; 19 Apr 2008 16:21:17 -0000 Subject: buy some viagra HURRAY X-DSPAM-Result: Innocent X-DSPAM-Processed: Sat Apr 19 17:21:17 2008 X-DSPAM-Confidence: 0.4945 X-DSPAM-Probability: 0.0330 X-DSPAM-Signature: 480a1bfd216125429498786 viagra sale really HURRAY cheap! only $5! As you can see, there is no new line in the first line. Return-Path and Delivered-To are set in a single line, which makes qmail-inject (which is later used by /var/qmail/bin/sendmail) to abort like this cat /tmp/sendmail-msg.txt | /var/qmail/bin/sendmail -f hm(a)hmonteiro.net notspam-hm(a)hmonteiro.net qmail-inject: fatal: unable to parse this line: Return-Path: <hugo.monteiro(a)fct.unl.pt>Delivered-To: hm(a)hmonteiro.net Before i go into digging the plugin code i was wondering if i'm not seing things clearly and thinking this is in fact a bug in the plugin code. Thank you all in advance, Hugo Monteiro. -- ci.fct.unl.pt:~# cat .signature Hugo Monteiro Email : hugo.monteiro(a)fct.unl.pt Telefone : +351 212948300 Ext.15307 Centro de Informática Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa Quinta da Torre 2829-516 Caparica Portugal Telefone: +351 212948596 Fax: +351 212948548 www.ci.fct.unl.pt apoio(a)fct.unl.pt ci.fct.unl.pt:~# _

2 2

[Dovecot] Run command when moving messages
by Juan Asensio Sánchez 21 Apr '08

21 Apr '08

Hi Is it possible to run a command when a message is moved from a folder to another? I want this to simulate the antispam plugin, so one script would be ran when a message is moved to/from the spam folder, so the sa-learn command would be called. Thanks

3 2

[Dovecot] building a simple antispam plugin
by Alexander Prinsier 21 Apr '08

21 Apr '08

Hello, I'm trying to build another antispam plugin, but some things are a bit unclear. In backend_handle_mail I put store the signature returned from signature_extract into my antispam_transaction_context. In backend_commit it appears that the signature is empty. (It wasn't in backend_handle_mail). Somehow between backend_handle_mail en backend_commit it has been cleared... When I use i_strdup it appears to work. Anyone can tell me where this clearing happens? Is i_strdup the right way to do it then? Thanks, Alexander

3 4