- dovecot - dovecot.org

[Dovecot] shared Sent and Junk folders
by Tolga 03 Apr '08

03 Apr '08

Hi, For some odd reason, two of my users share the same Sent and Junk folders, therefore I keep getting errors about Sent folder reading permissions and one user reading the other user's Junk folder. What can I do about this odd problem? Regards, Tolga -- Stay with *nix :)

4 5

[Dovecot] How to fetch mails in Spam dir by MUA via POP3?
by Zhang Huangbin 03 Apr '08

03 Apr '08

Hi, all. How can i fetch mails in Spam directory by MUA (Such as Thunderbird) via POP3? Thanks very much. -- Best Regards. Zhang Huangbin - OpenBSD 4.2 -release, i386. - RHEL 5.1 Client

4 3

[Dovecot] Lmtp between hosts? (postfix/dovecot/ldap)
by k bah 02 Apr '08

02 Apr '08

I have 2 hosts: (a) - dovecot-1.0.5-6 - postfix-2.4.5-20 -> It's not the mx record for the domain, just holds the mailboxes -> Postfix uses LDAP for user lookup, dovecot too. -> Works ok if I set it to be the final mail destination, with Cyrus and Dovecot LDA (mailbox_transport). -> Has no domain associated (dns) with this ip address (b) - postfix-2.3.2-28 -> Has the mx record for that domain, has ip address that the domain points to. (users @ domain.org) -> Works ok if I install dovecot and set the mailbox_transport to be on this machine, both with dovecot and cyrus. What I'm trying to do: Have host (b) to receive mails for that domain, and by setting it's transport_maps to be /etc/postfix/transport, and there (tranport maps) point to host (a), using ltmp: "domain.org lmtp:ip_address_machine_A:24" ("domain.org lmtp:inet:ip_address_machine_A:24" does not work, gives me "fatal: valid hostname or network address required in server description: inet:ip_address_machine_A:24") Both machines have /etc/services with lmtp to port 24 tcp/udp. http://www.postfix.org/transport.5.html was not so clear to me. Ok, when I took out the "inet" part on the transport maps file, it connected to the host (a), which has this on master.cf: "machine_A_ip_address:24 inet n - n - - lmtp" it "worked", since machine (b) (received the mail and has mx record) delivered the mail to machine (a) (holds mailboxes, runs dovecot), but that stopped, machine (b) connects to port 24 on machine (a), and stays there, connected, without saying nothing (sniffed it). When I kill the connection (kill postfix on machine (a)), machine (b) complains on the log file: postfix/lmtp[704]: msg_id: to=<xx(a)xx.yy>, relay=machine_A[machine_A]:24, delay=223, delays=0.08/0.01/223/0, dsn=4.4.2, status=deferred (lost connection with machine_A[machine_A] while receiving the initial server greeting). -- questions -- I don't know if I'm doing things wrong (configuration error) or the wrong thing (should try other ways), so my questions: 1) Is this setup going to work ever, or it's wrong to try to get it to work? I want to hold mailboxes on a different host, and now I got to use dovecot (in case I hear: "try it with cyrus instead" =o)). 2) Viewing from the machine that receives the mail, and has mx record, the transport should be lmtp, right? Since it's now a matter of "delivery". Postfix: <...> -> <qmgr> -> (<local> or <smtp> or <pipe>) When using lmtp, I'm in <local>?? I mean, to get the message to the other machine (just mailboxes, no mx) I SHOULD USE LMTP(?) 3) Viewing from the machine holding the mailboxes, is there a way to make dovecot listen on that port? Or should I continue to use Postfix, and use postfix on this machine to deliver to dovecot (dovecot lda config works ok if using 1 and only 1 machine for everything - mx record, mailboxes). With Cyrus I talked lmtp directly, Postfix receives the mail and uses lmtp to talk to cyrus, using a unix socket. If anyone replies to the topic, and the discussion goes deeper on some of the alternatives, I paste my configs and come with further details, since what's working isolated I didn't paste here. Previous tests with just Cyrus or Dovecot on 1 machine setup worked, so I think it would just "bloat" the mail with information. thanks = -- Powered by Outblaze

3 2

[Dovecot] Alert when quota is warning
by Nicolas Letellier 02 Apr '08

02 Apr '08

Hello. Is it exist a plugin to alert when a POP/IMAP account has a warning quota (like 90%)? Or, do you know a solution to do it? The alert could be an email sent. Thanks. - Nicolas.

1 0

[Dovecot] Outlook cant connect to POP server.
by "Fábio M. Catunda" 02 Apr '08

02 Apr '08

Hi, I'm having a weir situation with MS Outlook and dovecot. I'm using POP for some users, some can connect, others cant. With tcpdump I got this packet coming from client to server: 2008-03-31 18:30:20.913718 IP (tos 0x0, ttl 128, id 1082, offset 0, flags [DF], proto: TCP (6), length: 48) 192.168.12.9.1072 > 192.168.5.124.110: S, cksum 0x90db (correct), 2564735473:2564735473(0) win 65535 <mss 1460,nop,nop,sackOK> E..0.:@...c.... ...|.0.n........p............... But the server never give an answer. I don't have any idea why the server do not answer, in error.log and info.log I got nothing. Dovecot version: 1.0.rc15-2etch3 (Debian package) And those are the workarrounds that I enabled: pop3_client_workarounds = outlook-no-nuls oe-ns-eoh I'm kind of lost, any tip is appreciated! Thanks!

2 1

[Dovecot] stalling on LOGIN
by Brandon Keepers 01 Apr '08

01 Apr '08

I'm getting strange timeouts occasionally on Dovecot 1.0.rc15 on Debian 4.0, and haven't been able to figure out the cause. $ ./src/imaptest user=test%d(a)imaptest.com host=localhost pass=foo mbox=~/dovecot-crlf - select=0 Logi Logo 100% 100% 2 4 7/ 10 0 0 10/ 10 0 0 10/ 10 0 0 10/ 10 0 0 10/ 10 0 0 10/ 10 0 0 10/ 10 0 0 10/ 10 0 0 10/ 10 0 0 10/ 10 0 0 10/ 10 0 0 10/ 10 0 0 10/ 10 0 0 10/ 10 0 0 10/ 10 0 0 10/ 10 - 3 stalled for 16 secs in command: 2 LOGIN "test1(a)imaptest.stage.dealerflow.com " "test" - 4 stalled for 16 secs in command: 2 LOGIN "test1(a)imaptest.stage.dealerflow.com " "test" - 5 stalled for 16 secs in command: 2 LOGIN "test1(a)imaptest.stage.dealerflow.com " "test" - 6 stalled for 16 secs in command: 2 LOGIN "test1(a)imaptest.stage.dealerflow.com " "test" - 7 stalled for 16 secs in command: 2 LOGIN "test1(a)imaptest.stage.dealerflow.com " "test" - 8 stalled for 16 secs in command: 2 LOGIN "test1(a)imaptest.stage.dealerflow.com " "test" - 9 stalled for 16 secs in command: 2 LOGIN "test1(a)imaptest.stage.dealerflow.com " "test" - 10 stalled for 16 secs in command: 2 LOGIN "test1(a)imaptest.stage.dealerflow.com " "test" - 11 stalled for 16 secs in command: 2 LOGIN "test1(a)imaptest.stage.dealerflow.com " "test" - 12 stalled for 16 secs in command: 2 LOGIN "test1(a)imaptest.stage.dealerflow.com " "test" Eventually, I get: Error: test18(a)imaptest.stage.dealerflow.com[6]: Unexpected BYE: * BYE Disconnected for inactivity. Error: test43(a)imaptest.stage.dealerflow.com[10]: Unexpected BYE: * BYE Disconnected for inactivity. Error: test19(a)imaptest.stage.dealerflow.com[9]: Unexpected BYE: * BYE Disconnected for inactivity. Error: test40(a)imaptest.stage.dealerflow.com[8]: Unexpected BYE: * BYE Disconnected for inactivity. Error: test44(a)imaptest.stage.dealerflow.com[3]: Unexpected BYE: * BYE Disconnected for inactivity. Error: test26(a)imaptest.stage.dealerflow.com[7]: Unexpected BYE: * BYE Disconnected for inactivity. Error: test38(a)imaptest.stage.dealerflow.com[4]: Unexpected BYE: * BYE Disconnected for inactivity. Error: test32(a)imaptest.stage.dealerflow.com[1]: Unexpected BYE: * BYE Disconnected for inactivity. Error: test95(a)imaptest.stage.dealerflow.com[5]: Unexpected BYE: * BYE Disconnected for inactivity. Error: test25(a)imaptest.stage.dealerflow.com[2]: Unexpected BYE: * BYE Disconnected for inactivity. $ sudo /usr/sbin/dovecot -n # /etc/dovecot/dovecot.conf protocols: imap listen: *:143 ssl_disable: yes disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login first_valid_uid: 8 last_valid_uid: 8 mail_location: maildir:/var/mail/%1d/%d/%1n/%n mail_debug: yes auth default: mechanisms: plain login debug: yes passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf userdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf socket: type: listen client: master: path: /var/run/dovecot/auth-master mode: 432 user: mail group: mail # dovecot-ldap.conf hosts = localhost:389 dn = cn=admin,dc=example,dc=com dnpass = secret auth_bind = yes auth_bind_userdn = uid=%n,ou=people,associatedDomain= %d,o=accounts,dc=example,dc=com ldap_version = 3 base = dc=example.com,dc=com user_filter = (mail=%u) user_global_uid = mail user_global_gid = mail I've tried enabling all the debugging, but there don't seem to be any errors. Any ideas? Thanks, Brandon

3 3

[Dovecot] v1.1.rc4 released
by Timo Sirainen 01 Apr '08

01 Apr '08

http://dovecot.org/releases/1.1/rc/dovecot-1.1.rc4.tar.gz http://dovecot.org/releases/1.1/rc/dovecot-1.1.rc4.tar.gz.sig I didn't have time/energy to fix everything I wanted, so it'll probably be a few more RCs left until v1.1.0. This is anyway an important release, because it fixes two buffer overflows in search code which have been in all v1.1 releases (but not v1.0). Really stupid mistakes, I must have been tired or something when writing the code.. Anyway I now added code to notice these kind of buffer overflows when they happen (if --enable-debug is used), so hopefully these will be the last ones. * Fixed two buffer overflows in str_find_init(). It was used by SEARCH code when searching for headers or message body. Added code to catch these kind of overflows when compiling with --enable-debug. Found by Diego Liziero. + LDAP: Added debug_level and ldaprc_path settings (OpenLDAP-only) + Squat: Added fts_squat = partial=n full=m settings. See the wiki. - dbox metadata updating fixes. - quota: backend=n didn't work - SEARCH RECENT may have returned non-recent messages if index files were created by v1.0. - If mailbox was opened as read-only with EXAMINE, STOREs were permanently saved. - LDAP: Templates were somewhat broken (by richs at whidbey.net)

2 1

[Dovecot] FreeBSD port: port's patch for 1.1rc3
by Geoffroy Desvernay 01 Apr '08

01 Apr '08

For those who wants testing 1.1rc3 on FreeBSD, this is a simple patch against /usr/ports/mail/dovecot. To apply: # cd /usr/ports/mail/dovecot # patch -p1 < /tmp/patch_dovecot_1.0.13-1.1.rc3.diff Hope I did not forget something important... This is an adaptation of the existing port. PS: for port's maintainer: Which way will take 1.0 vs 1.1 upgrade ? a new mail/dovecot10 port or ? Hope this helps -- Geoffroy Desvernay diff -bruN dovecot-1.0.13/Makefile dovecot/Makefile --- dovecot-1.0.13/Makefile 2008-04-01 14:41:12.000000000 +0200 +++ dovecot/Makefile 2008-04-01 14:29:33.000000000 +0200 @@ -7,9 +7,9 @@ # PORTNAME= dovecot -DISTVERSION= 1.0.13 +DISTVERSION= 1.1.rc3 CATEGORIES= mail ipv6 -MASTER_SITES= http://www.dovecot.org/releases/1.0/ +MASTER_SITES= http://www.dovecot.org/releases/1.1/rc/ MAINTAINER= robin(a)isometry.net COMMENT= Secure and compact IMAP and POP3 servers diff -bruN dovecot-1.0.13/distinfo dovecot/distinfo --- dovecot-1.0.13/distinfo 2008-04-01 14:41:12.000000000 +0200 +++ dovecot/distinfo 2008-04-01 14:43:56.000000000 +0200 @@ -1,3 +1,3 @@ -MD5 (dovecot-1.0.13.tar.gz) = 281bd9dee8d6c1674977257acc80ce64 -SHA256 (dovecot-1.0.13.tar.gz) = 16da29b2bc08d0178a09323bf0787a2a0e953075655566a7b4b6b148c87ac25f -SIZE (dovecot-1.0.13.tar.gz) = 1774025 +MD5 (dovecot-1.1.rc3.tar.gz) = eed10a2f5142ebdf88276c0a82f548e1 +SHA256 (dovecot-1.1.rc3.tar.gz) = 5a72318a6f4d12a1da7104de94b439a8523142c0f54af1f1ff64966820ef9460 +SIZE (dovecot-1.1.rc3.tar.gz) = 2222329 diff -bruN dovecot-1.0.13/files/patch-dovecot-example.conf dovecot/files/patch-dovecot-example.conf --- dovecot-1.0.13/files/patch-dovecot-example.conf 2008-04-01 14:41:12.000000000 +0200 +++ dovecot/files/patch-dovecot-example.conf 2008-04-01 14:38:52.000000000 +0200 @@ -1,5 +1,5 @@ ---- dovecot-example.conf.orig 2008-03-04 05:48:12.000000000 +0000 -+++ dovecot-example.conf 2008-03-05 22:49:08.554336095 +0000 +--- dovecot-example.conf.orig 2008-04-01 14:30:50.000000000 +0200 ++++ dovecot-example.conf 2008-04-01 14:38:28.000000000 +0200 @@ -12,7 +12,7 @@ # Default values are shown for each setting, it's not required to uncomment # any of the lines. Exception to this are paths, they're just examples with @@ -15,9 +15,9 @@ #protocols = imap imaps +protocols = %%PROTOCOLS%% - # IP or host address where to listen in for connections. It's not currently - # possible to specify multiple addresses. "*" listens in all IPv4 interfaces. -@@ -210,6 +212,7 @@ + # A space separated list of IP or host addresses where to listen in for + # connections. "*" listens in all IPv4 interfaces. "[::]" listens in all IPv6 +@@ -213,6 +214,7 @@ # <doc/wiki/MailLocation.txt> # #mail_location = @@ -25,7 +25,7 @@ # If you need to set multiple mailbox locations or want to change default # namespace settings, you can do it by defining namespace sections. -@@ -256,6 +259,7 @@ +@@ -273,6 +275,7 @@ # used only for creating mbox dotlock files when creation fails for INBOX. # Typically this is set to "mail" to give access to /var/mail. #mail_privileged_group = @@ -33,7 +33,7 @@ # Grant access to these supplementary groups for mail processes. Typically # these are used to set up access to shared mailboxes. Note that it may be -@@ -320,6 +324,7 @@ +@@ -339,6 +342,7 @@ # IP address. Useful for seeing who are actually using the IMAP processes # (eg. shared mailboxes or if same uid is used for multiple accounts). #verbose_proctitle = no @@ -41,7 +41,7 @@ # Valid UID range for users, defaults to 500 and above. This is mostly # to make sure that users can't log in as daemons or other system users. -@@ -333,6 +338,7 @@ +@@ -352,6 +356,7 @@ # belongs to supplementary groups with non-valid GIDs, those groups are # not set. #first_valid_gid = 1 @@ -49,7 +49,7 @@ #last_valid_gid = 0 # Maximum number of running mail processes. When this limit is reached, -@@ -506,19 +512,19 @@ +@@ -501,19 +506,19 @@ protocol imap { # Login executable location. @@ -73,7 +73,7 @@ # Maximum IMAP command line length in bytes. Some clients generate very long # command lines with huge mailboxes, so you may need to raise this if you get -@@ -528,7 +534,7 @@ +@@ -527,7 +532,7 @@ # Support for dynamically loadable plugins. mail_plugins is a space separated # list of plugins to load. #mail_plugins = @@ -82,15 +82,15 @@ # Send IMAP capabilities in greeting message. This makes it unnecessary for # clients to request it with CAPABILITY command, so it saves one round-trip. -@@ -563,6 +569,7 @@ +@@ -562,6 +567,7 @@ # accept '/' suffix in mailbox names in subscriptions list. # The list is space-separated. - #imap_client_workarounds = outlook-idle -+ imap_client_workarounds = delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep + #imap_client_workarounds = ++ imap_client_workarounds = delay-newmail netscape-eoh tb-extra-mailbox-sep } ## -@@ -571,11 +578,11 @@ +@@ -570,11 +576,11 @@ protocol pop3 { # Login executable location. @@ -104,15 +104,7 @@ # Don't try to set mails non-recent or seen with POP3 sessions. This is # mostly intended to reduce disk I/O. With maildir it doesn't move files -@@ -621,6 +628,7 @@ - # installations. - # - #pop3_uidl_format = -+ pop3_uidl_format = %08Xu%08Xv - - # POP3 logout format string: - # %t - number of TOP commands -@@ -635,7 +643,7 @@ +@@ -634,7 +640,7 @@ # Support for dynamically loadable plugins. mail_plugins is a space separated # list of plugins to load. #mail_plugins = @@ -121,7 +113,7 @@ # Workarounds for various client bugs: # outlook-no-nuls: -@@ -646,6 +654,7 @@ +@@ -645,6 +651,7 @@ # missing. This option simply sends it if it's missing. # The list is space-separated. #pop3_client_workarounds = @@ -129,20 +121,24 @@ } ## -@@ -663,10 +672,11 @@ +@@ -662,7 +669,7 @@ # Support for dynamically loadable plugins. mail_plugins is a space separated # list of plugins to load. #mail_plugins = - #mail_plugin_dir = /usr/lib/dovecot/lda + #mail_plugin_dir = %%PREFIX%%/lib/dovecot/lda + # If user is over quota, return with temporary failure instead of + # bouncing the mail. +@@ -677,6 +684,7 @@ + # Binary to use for sending mails. #sendmail_path = /usr/lib/sendmail + sendmail_path = /usr/sbin/sendmail - # UNIX socket path to master authentication server to find users. - #auth_socket_path = /var/run/dovecot/auth-master -@@ -677,7 +687,7 @@ + # Human readable error message for rejection mails. Use can use variables: + # %n = CRLF, %r = reason, %s = subject, %t = recipient +@@ -691,7 +699,7 @@ ## # Executable location @@ -151,7 +147,7 @@ # Set max. process size in megabytes. #auth_process_size = 256 -@@ -783,7 +793,7 @@ +@@ -814,7 +822,7 @@ #passdb passwd-file { # File contains a list of usernames, one per line @@ -160,7 +156,7 @@ #deny = yes #} -@@ -1021,7 +1031,7 @@ +@@ -1051,7 +1059,7 @@ # referenced using URIs in format "proxy:<name>". dict { @@ -169,21 +165,29 @@ } ## -@@ -1045,7 +1055,7 @@ - # directory. You can also optionally give a global ACL directory path where - # ACLs are applied to all users' mailboxes. The global ACL directory contains - # one file for each mailbox, eg. INBOX or sub.mailbox. -- #acl = vfile:/etc/dovecot-acls -+ #acl = vfile:%%PREFIX%%/etc/dovecot-acls +@@ -1099,7 +1107,7 @@ + # one file for each mailbox, eg. INBOX or sub.mailbox. cache_secs parameter + # specifies how many seconds to wait between stat()ing dovecot-acl file + # to see if it changed. +- #acl = vfile:/etc/dovecot-acls:cache_secs=300 ++ #acl = vfile:%%PREFIX%%/etc/dovecot-acls:cache_secs=300 # Convert plugin. If set, specifies the source storage path which is # converted to destination storage (mail_location) when the user logs in. -@@ -1059,7 +1069,7 @@ +@@ -1118,14 +1126,14 @@ # until the message can be saved within quota limits. The configuration file # is a text file where each line is in format: <priority> <mailbox name> # Mails are first deleted in lowest -> highest priority number order - #trash = /etc/dovecot-trash.conf + #trash = %%PREFIX%%/etc/dovecot-trash.conf - # Lazy expunge plugin. Currently works only with maildirs. When a user - # expunges mails, the mails are moved to a mailbox in another namespace + # Expire plugin. Mails are expunged from mailboxes after being there the + # configurable time. The first expiration date for each mailbox is stored in + # a dictionary so it can be quickly determined which mailboxes contain + # expired mails. The actual expunging is done in a nightly cronjob, which + # you must set up: +- # dovecot --exec-mail ext /usr/libexec/dovecot/expire-tool ++ # dovecot --exec-mail ext %%PREFIX%%/libexec/dovecot/expire-tool + #expire = Trash 7 Spam 30 + #expire_dict = db:/var/lib/dovecot/expire.db +

3 2

[Dovecot] deliver tries to compile already compiled sieve script
by Alexander Prinsier 01 Apr '08

01 Apr '08

Hello, I'm trying to setup dovecot with sieve support in a way where all sieve scripts are precompiled. All sieve scripts are in /var/cache/sieve/. I believe I discovered a bug here. I describe below how to reproduce it. Dovecot and the user that deliver runs as do not have write permission in /var/cache/sieve/. h01:/var/cache/sieve# ls -la total 16 drwxr-xr-x 2 ecp ecp 4096 Mar 31 21:32 . drwxr-xr-x 10 root root 4096 Mar 31 20:14 .. -rw-r--r-- 1 ecp ecp 88 Mar 31 21:32 mailtest1(a)domain.com.sieve -rw-r--r-- 1 ecp ecp 132 Mar 31 21:32 mailtest1(a)domain.com.sievec When deliver runs it logs this error: open(/var/cache/sieve/mailtest1(a)domain.com.sievec.tmp) failed: Permission denied This indicates deliver tries to compile the script, even though the compiled version already is there. To verify I tested another case. I make the compiled script immutable and I did a chmod 777 on /var/cache/sieve/. Then deliver logs this error: rename(/var/cache/sieve/mailtest1(a)domain.com.sievec.tmp, /var/cache/sieve/mailtest1(a)domain.com.sievec) failed: Operation not permitted And deliver created the file mailtest1(a)domain.com.sievec.tmp. Some relevant pieces of my dovecot.conf: protocol lda { mail_plugins = quota cmusieve ... } plugin { sieve = /var/cache/sieve/%u.sieve } Anyone can help me? Is this an error on my end, or really a bug? Alexander

2 3

[Dovecot] Dovecot 1.1rc3 crashes with Dbox + imap_quota plugin
by eric＠flerd.com 01 Apr '08

01 Apr '08

Version: Dovecot v1.1.rc3 OS: CentOS 5 running in OpenVZ CPU: x86_64 Was running fine with maildir and decided to get dbox a try. Test user created with a dbox mailstore backend and when a client logs in that tries to run a getquotaroot imap command the process SIGSEGV's. Have been able to narrow it down to dbox crashing against dict quota as well as dirsize. Maildir works just fine. example telnet session: ... 5 getquota * 5 NO Quota root doesn't exist. 6 getquotaroot inbox Connection closed by foreign host. ------ Got the backtrace from a coredump as well: Program terminated with signal 11, Segmentation fault. #0 0x0000000000463d99 in mail_index_get_header_ext (view=0x0, ext_id=2, data_r=0x7fff8ad72140, data_size_r=0x7fff8ad72138) at mail-index-view.c:550 550 view->v.get_header_ext(view, NULL, ext_id, data_r, data_size_r); ---- (gdb) bt full #0 0x0000000000463d99 in mail_index_get_header_ext (view=0x0, ext_id=2, data_r=0x7fff8ad72140, data_size_r=0x7fff8ad72138) at mail-index-view.c:550 No locals. #1 0x000000000044604c in dbox_sync_want_flush_dirty (mbox=0x2aaaaaae5cc8, close_flush_dirty_flags=true) at dbox-sync.c:262 hdr = <value optimized out> data = <value optimized out> data_size = <value optimized out> #2 0x0000000000446101 in dbox_sync_begin (mbox=0x0, ctx_r=0x7fff8ad72278, close_flush_dirty_flags=64, force=64) at dbox-sync.c:297 storage = (struct mail_storage *) 0x2aaaaaadb878 ctx = <value optimized out> sync_flags = <value optimized out> ret = <value optimized out> rebuild = <value optimized out> #3 0x00000000004468c8 in dbox_sync (mbox=0x0, close_flush_dirty_flags=64) at dbox-sync.c:396 sync_ctx = (struct dbox_sync_context *) 0x2aaaaaae5cc8 #4 0x000000000043f0c4 in dbox_storage_mailbox_close (box=0x0) at dbox-storage.c:312 mbox = <value optimized out> ret = <value optimized out> #5 0x00002aaaab62df50 in fts_mailbox_close (box=0x2aaaaaae5cc8) at fts-storage.c:65 fbox = (struct fts_mailbox *) 0x2aaaaaae8f90 ret = <value optimized out> #6 0x00002aaaab42a5ed in cmd_getquotaroot (cmd=0x2aaaaaadc338) at imap-quota-plugin.c:98 storage = <value optimized out> box = (struct mailbox *) 0x0 iter = (struct quota_root_iter *) 0x0 root = <value optimized out> orig_mailbox = 0x2aaaaaae0518 "INBOX" mailbox = 0x49a6ca "INBOX" str = (string_t *) 0x2aaaaaacf1c0 #7 0x000000000041ab18 in client_command_input (cmd=0x0) at client.c:546 client = (struct client *) 0x2aaaaaadbf50 command = <value optimized out> __PRETTY_FUNCTION__ = "client_command_input" #8 0x000000000041abb9 in client_command_input (cmd=0x2aaaaaadc338) at client.c:595 client = (struct client *) 0x2aaaaaadbf50 command = (struct command *) 0x7fff8ad72140 __PRETTY_FUNCTION__ = "client_command_input" #9 0x000000000041b32f in client_handle_input (client=0x2aaaaaadbf50) at client.c:636 _data_stack_cur_id = 3 ret = <value optimized out> remove_io = <value optimized out> handled_commands = false #10 0x000000000041b54f in client_input (client=0x2aaaaaadbf50) at client.c:691 cmd = <value optimized out> output = (struct ostream *) 0x2aaaaaadc1e8 bytes = 27 __PRETTY_FUNCTION__ = "client_input" #11 0x0000000000486a38 in io_loop_handler_run (ioloop=<value optimized out>) at ioloop-epoll.c:201 ctx = <value optimized out> event = (const struct epoll_event *) 0x2aaaaaad7dc0 list = (struct io_list *) 0x2aaaaaad8780 io = (struct io_file *) 0x2aaaaaadc280 tv = {tv_sec = 1799, tv_usec = 999598} events_count = <value optimized out> t_id = 2 msecs = <value optimized out> ret = 1 i = 0 call = <value optimized out> #12 0x0000000000485d1d in io_loop_run (ioloop=0x2aaaaaad7b60) at ioloop.c:301 No locals. #13 0x0000000000422871 in main (argc=<value optimized out>, argv=0x0, envp=0x7fff8ad72578) at main.c:293 No locals. ---------- Let me know if there's any other info you need.

1 0