- dovecot - dovecot.org

[Dovecot] Log Message Disconnected: Disconnected
by Jackie Hunt 24 Aug '07

24 Aug '07

We just started running Dovecot this summer at our campus. Overall things have gone very well, and performance have improved since moving off of U of Wash. We have run into an issue with a user running Thunderbird 2.0.0.6 on Solaris. He is seeing a very long response time (20mins+) on his first mailbox selection each morning when he comes into work. I looked at the Dovecot log, and the only think I can see that might be a bit out of the ordinary is two Disconnected messages that happen about 30 minutes apart each morning: Aug 17 04:54:08 host dovecot: IMAP(uname): Disconnected: Disconnected Aug 17 05:24:09 host dovecot: IMAP(uname): Disconnected: Disconnected The disconnected messages for other users say "Disconnected: Logged Out". I don't know for sure if these messages are related to his problem. Can anyone can shed some light on why Dovecot might indicate a "double disconnect"? Thanks, Jackie --- Jackie Hunt ACNS Voice: (970) 663-3789 Colorado State University FAX: (970) 491-1958 Fort Collins, CO 80523 Email: jackie.hunt(a)colostate.edu

2 2

[Dovecot] Enabling IMAP namespaces for existing folders
by Phil Edwards 24 Aug '07

24 Aug '07

Hi. We're using dovecot 1.0.3 with a very very simple setup; specifically, there are no namespaces defined. Users have been puttering away happily for many months, creating subfolders and whatnot with (almost) zero problems. We'd like to start taking advantage of shared IMAP folders. I've been reading over the dovecot wiki and have only one question that I don't see documented. The docs point out that if we define any namespaces, we must also explicitly define the private previously-default one. My question is: are there any migration or transition steps that must be taken there? Will clients' configuration need to be modified in any way when, e.g., their existing IMAP folders suddenly become part of a private namespace? Thanks for the newbie help. -- Phil Edwards

2 1

[Dovecot] Imap service and quota
by Miguel 23 Aug '07

23 Aug '07

Hi, i have just migrated from courier-imap to dovecot. im using it with vpopmail, the pop service is working ok but the imap service for imp webmail is not writing the quota information to the maildirsize file, as recommended in the docs, i have this in dovecot.conf : plugin { # Quota plugin. Multiple backends are supported: # dirsize: Find and sum all the files found from mail directory. # Extremely SLOW with Maildir. It'll eat your CPU and disk I/O. # dict: Keep quota stored in dictionary (eg. SQL) # maildir: Maildir++ quota # fs: Read-only support for filesystem quota quota = maildir } This only happend with imp/imap, there is not problem using a pop client Regards,

3 3

[Dovecot] UW-IMAP to Dovecot conversion - How to migrate the folders?
by Patrick - South Valley Internet 23 Aug '07

23 Aug '07

Hi all, I've read so much information on this that I'm a little confused as to what to follow. Here's what's going on: We just migrated away from our AIX machines which were running Postfix and UW-IMAP. We're now running Postfix with Dovecot. I already converted everyone's mbox file to maildir, but now I'm having a little troubles with how to exactly populate their IMAP folders. People are saying they cannot see their folders. These 'folders' they are talking about can be found in their /home directory. I have the following URLs I've been looking at: http://wiki.dovecot.org/Migration/MailFormat http://people.redhat.com/rkeech/maildir-migration.txt http://wiki.dovecot.org/Plugins/Convert http://www.dovecot.org/list/dovecot/2007-June/023757.html What would be the suggested method to convert them? So far I understand that I need to somehow populate the /home/USERNAME/Maildir/subscriptions file with the items located in /home/USERNAME/.mailboxlist and then I don't know what to do from there. I don't know if I need to incorporate a Dovecot plugin, or if there is a script I can run to do this for me. Since this is a live server, I would prefer to test on a single account before I run a plugin that would effect all users globally. Any help would be very appreciated - thanks in advance! Patrick

6 12

[Dovecot] Exim-dovecot-Horde/imp-Mysql
by Andre Eisvogel 22 Aug '07

22 Aug '07

Dear all, I'm running a linuxbox with ' Dovecot<->Exim<->horde/IMP<-> Mysql ', this is a very good combination and works excellent for the system users. Now I want to change the configuration and authenticate against the mysql database from horde. That way it is much easy for me to create (virtual) mail users. I also want to use the mail alias of the horde users for Exim and Dovecot. My questions are; is it possible to use the horde mysql database for this? And is it also possible for the mail alias of horde? If this is possible, is there a howto of this configuration? The packages i'm using are: Exim 4.67 Dovecot 1:1.0.3 Horde 3.1.4 Mysql 5.0.45 PHP 5.2.3 -- Met vriendelijke groet / Kind regards, André Eisvogel

2 2

[Dovecot] maildir question
by Tim Bates 22 Aug '07

22 Aug '07

If I copy message files (from a command prompt) will dovecot get upset or confused? Do I need to delete index files or anything like that? I ask because I need to restore some messages from a backup, but not restore the entire maildir. I tried some the other day as a test, but the user is saying that they didn't appear. TB ********************************************************************** This message is intended for the addressee named and may contain privileged information or confidential information or both. If you are not the intended recipient please delete it and notify the sender. **********************************************************************

3 3

[Dovecot] Subscriptions - delivering to different folders
by bichumo 21 Aug '07

21 Aug '07

Hi, I am using Postfix and Dovecot. I have set up backup_mailbox(a)domain.tld, which gets mail copies from user1(a)domain.tld user2(a)domain.tld user3(a)domain.tld, the copy option is set in postfix recipient_bcc_maps = path_to_file_recipient_bcc. In recipient_bcc file I have: user1(a)domain.tld backup_mailbox(a)domain.tld user2(a)domain.tld backup_mailbox(a)domain.tld user3(a)domain.tld backup_mailbox(a)domain.tld Postfix does the job and copies user1, user2, user3 emails to backup_mailbox. But I also want to filter mails in backup_mailbox and to put user1 mails to USER1 folder in backup_mailbox, user2 mails to USER2 folder in backup_mailbox and so on. How this is possible? I made an entry in subscriptions file of user1, user2, user3. Now I have folders .user1, .user2, user3 in backup_mailbox folder and I can also see these folders through webmail client (squirrelmail), but how do I put email copy which comes from user1(a)domain.tld to backup_mailbox(a)domain.tld to go not to main folder of backup_mailbox but to USER1 folder in backup_mailbox folder. Thanks for any suggestions.

2 1

[Dovecot] userdb override?
by Leroy van Logchem 21 Aug '07

21 Aug '07

Hi, I used to change the mailbox root for some users using a custom userdb file which contains lines like: doe::20000:200::/u/doe::userdb_mail=mbox:/u/doe/Mail:INBOX=/var/mail/%u The logfiles shows the mail location stays default ( rc15 worked ): --- dovecot: Aug 21 09:43:49 Info: auth(default): master out: USER 250 doe system_user=doe uid=20324 gid=200 home=/u/doe dovecot: Aug 21 09:43:49 Info: imap-login: Login: user=<doe> dovecot: Aug 21 09:43:49 Info: IMAP(doe): Effective uid=20000, gid=200, home=/u/doe dovecot: Aug 21 09:43:49 Info: IMAP(doe): mbox: data=/u/doe/:INBOX=/var/mail/doe dovecot: Aug 21 09:43:49 Info: IMAP(doe): mbox: root=/u/doe, index=/u/doe, inbox=/var/mail/doe --- Configuration: # 1.0.3: etc/dovecot.conf mail_location: mbox:~/:INBOX=/var/mail/%u auth default: mechanisms: plain login digest-md5 cram-md5 ntlm verbose: yes debug: yes passdb: driver: passwd-file args: /etc/userdb_extra passdb: driver: pam userdb: driver: passwd args: /etc/userdb_extra userdb: driver: passwd-file args: /etc/userdb_extra -- Leroy

2 2

Re: [Dovecot] imap memory footprint rather large
by Timo Sirainen 21 Aug '07

21 Aug '07

[back to list] On Tue, 2007-08-14 at 14:50 +0300, Timo Sirainen wrote: > On Tue, 2007-08-14 at 13:47 +0200, martin f krafft wrote: > > also sprach Timo Sirainen <tss(a)iki.fi> [2007.08.14.1250 +0200]: > > > mmap()ing a 200MB file doesn't mean that it immediately uses 200MB > > > of memory. It just reserves that much virtual space. Even if it > > > happens to read the whole 200MB, it shouldn't be much different > > > from simply reading the file in small parts, in which case kernel > > > places the same 200MB to page cache. > > > > I am aware of that. I just wonder why dovecot has to read the entire > > file into memory, via read() or mmap(). > > It doesn't. It mmaps it entirely so it doesn't waste CPU mmaping and > unmapping parts of it. It's then accessed only when and where needed. It probably does access the whole file though. This is because all the cached data for messages are stored next to each others. So now that your client fetches only INTERNALDATE it doesn't really need to read much, but because mmaped pages are read 4kB at a time, it practically reads the whole file. Perhaps this could use some work in future too, so that fields that are accessed together are stored in cache file close together. But then if multiple clients are used, there can be conflicting access patterns, and what's good for one client would be bad for another. Data could also be duplicated to reduce disk reads for different access patterns, but that comes at the cost of disk space..

4 4

[Dovecot] Dovecot fails almost every 20 minutes exactly
by Patrick - South Valley Internet 21 Aug '07

21 Aug '07

Hi all, We just set up our new mail servers using Postfix and Dovecot. We have implemented a load balanced solution to where our two mail servers have a common NFS share. Everything is working great. Everything but Dovecot for the most part. In testing, Dovecot was great. Now that we're in the production environment, we've noticed that every 20 minutes, Dovecot will stop running. But it gets even weirder - it appears that Machine A will stop, then 20 mins later after we issue a 'service dovecot restart', Machine B will stop. Then the whole process starts over when we restart Dovecot on Machine B. I can't see anything out of the ordinary in the log files either. I'm at a loss as to what's going on. Here's my dovecot -n: ################################ # 1.0.3: /etc/dovecot.conf listen: * ssl_cert_file: /usr/share/ssl/hermes.garlic.com/hermes.garlic.com.cert.pem ssl_key_file: /usr/share/ssl/hermes.garlic.com/hermes.garlic.com.privatekey.pem login_dir: /var/run/dovecot-login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login first_valid_uid: 200 mail_location: maildir:/home/%u/Maildir:INDEX=MEMORY maildir_copy_with_hardlinks: yes maildir_copy_preserve_filename: yes mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 auth default: user: dovecot-auth username_format: %Lu passdb: driver: pam userdb: driver: passwd socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix ################################ Any ideas what could be wrong? I don't think that setting up a cron to restart both dovecot servers is an idea solution - I'm hoping this is an easy fix. Thanks in advance. Patrick

2 2