- dovecot - dovecot.org

[Dovecot] error with virtual users
by Antonio Casado Rodríguez 13 Mar '07

13 Mar '07

Hi, In my dovecot-deliver.log i have this: deliver(xxuser): Mar 13 11:36:49 Error: open(/home/xxuser/.temp.alboran.24421.63c6890e35b613e8) failed: No such file or directory deliver(yyuser): Mar 13 11:38:29 Error: open(/home/yyuser/.temp.alboran.26046.dcb46511eeb37f3d) failed: No such file or directory but i haven't homedir user. I have /var/spool/mail/xxuser/ maildir Is that a error? I have Dovecot-1.0-rc19 + dovecot-deliver + rhel 4.4 Thanks you

4 4

[Dovecot] index performance issues
by Netserve 13 Mar '07

13 Mar '07

Running 1.0.rc22 We have a single file server, running NFS (Single large sas disk) with about 80Gb of mail. mount -o remount,rsize=2048,wsize=2044,actimeo=0,soft,rw xx.xx.xx.xx:/mailboxes /nfs1 There are 3 front end pop/imap servers using an LVS director. Indexes are stored on each front end server. -rw------- 1 admin 500 144 Mar 12 17:47 dovecot.index -rw------- 1 admin 500 10272 Mar 12 17:47 dovecot.index.cache -rw------- 1 admin 500 120 Mar 12 17:47 dovecot.index.log Normally everything runs fine, there are about 1500 active pop accounts and 100 Imap. Typically, 10 to 20 pop accounts are downloading at anyone time, and there may be 10 or 20 active Imap sessions. If we find that the index partition has got to 100% full and corrupted the indexes then we'll delete the entire index dir and let dovecot rebuild all the indexes however, we end up with 100mbit / 10Mb/sec of network traffic between the NFS server and the pop/imap servers. The nfs server load climbs to 20+ as does the load on the front end mail servers. It can take 4 or 5 hours for the indexes to rebuild during which time imap is slow but works and pop downloads all end up with dead processes that need clearing every few minutes. admin 5869 0.0 0.1 4384 1060 ? D 17:56 0:00 \_ pop3 [info@.co.uk 180.98] admin 5877 0.0 0.1 4392 1112 ? D 17:57 0:00 \_ pop3 [bro94 62.182] admin 5879 0.0 0.1 4396 1052 ? D 17:57 0:00 \_ pop3 [spamcatch@.com 81.163] admin 5884 0.0 0.1 4392 1056 ? D 17:57 0:00 \_ pop3 [ctaylor@.com 81.175] Normally the nfs server delivers possibly 200Kbytes of traffic average spiking to 400Kbytes but the 900+Kbytes per second sustained rate for 5 or 6 hours is killing the service. Is there something we've got wrong here? (I know a Scsi raid NFS would help as would Gbit networking but I can't see the setup we've got as needing that sort of hardware spec?) Thanks John

5 11

[Dovecot] imap + unmounted home disk
by T. Horsnell 13 Mar '07

13 Mar '07

dovecot 0.99 still (RHEL4), I'm sorry to say. The config is for mbox's to live on the user's home disk. If the user tries to make an imap connection when his home disk is unmounted, various permission denied messages are logged, as expected, but then the imap process seems to hang around instead of aborting. The result is that eventually the imap process limit is reached, and even those users whose home disks are correctly mounted, cant get at their mail. Apologies if this has already been fixed - I cant find anything relevant in the archives. Cheers, Terry

2 4

[Dovecot] Password encoding
by David Mills 13 Mar '07

13 Mar '07

Hi, I've currently got a problem authenticating to my dovecot server (1.0rc15). The server is set up to authenticate against a mysql server, with a default password scheme of 'crypt'. The problem is that some of the passwords I need to transfer (all from /etc/shadow files) are md5 encoded, and when I put {md5-crypt} in front of the password to force the scheme, dovecot answers :"Unknown password scheme md5-crypt". If anyone has any ideas, I'd really appreciate it. TIA for your time. David -- David Mills Enki Technologies 01 76 00 71 20Unknown password scheme md5-crypt *De nouveaux sites voient le jour...* *...avec GenieBuilder !* Site de Vico <http://www.vico.fr> - enki.fr <http://www.enki.fr>

3 2

[Dovecot] Problems fetching mail
by Curt LeCaptain 13 Mar '07

13 Mar '07

I'm attempting to replace UW-IMAP with Dovecot, as my UW-IMAP implementation seems to be not working very well. Here's the problem I had with UW-IMAP: In Horde/IMP, messages just wouldn't appear at all. If I opened up the user's IMAP box via an IMAP client, I'd get a Bogus sequence in UID fetch error. So, now I've got Dovecot in place, and I'm getting the following error upon attempting to look at this same box: Error in IMAP command UID: Invalid UID messageset. Now, this user has 3 messages, each X-UID increments by one, starting at 1, so: X-UID: 1 X-UID: 2 X-UID: 3 None of those seem out of the ordinary size wise. I'm not sure what config information you'll need of me, as I'm new to dovecot, but any help would be appriciated. Thanks, Curt L.

3 8

[Dovecot] Quota and Trash
by Bernhard Schmidt 12 Mar '07

12 Mar '07

Hi, I finally got a grip on our mail guys to try out Dovecot after they started migrating a ~15k user mailsystem to Maildir+NFS (Netapp)+Courier and the performance was not as good as expected. So far the results are impressive, although there are of course a few small issues to be solved. One is the current Quota handling, which they use with Courier IMAP and (still) think it needs to be replicated 1:1 to dovecot. Currently they use maildir++ quota format. Mails moved to Trash get not included in the Quota calculation (standard "feature" of Courier IMAP) and get expunged after a certain period of days (IMAP_EMPTYTRASH). Is there any way we could replicate this behaviour with Dovecot? Not including mails in the Trash-folder into quota calculation seems to be a no-go to me according to the documentation, you can ignore the quota limit when copying messages into a certain folder with the "ignore" keyword but they are still included. This issue is directly related with the second one. Deleting old mails in Trash could be archieved with the expire-plugin, but that does not work with Dovecot v1.0, and I'd definitely want to run this. So I have to use "find", which deletes the mail from the folder. However, those mails are still included in the Quota calculation, so that will very likely become incorrect. Is there a generic recommendation for a tool that could be used to rebuild maildir quota calculations? Any other ideas how I could solve this problem and have dovecot behave like Courier here? Thanks, Bernhard

3 7

[Dovecot] Search not working?
by Marc Perkel 12 Mar '07

12 Mar '07

I switched for mbox to maildir last night and now searching folders isn't working. Getting a timeout. Is there something I might have forgot to configure?

2 3

[Dovecot] 1.0.rc26 released
by Timo Sirainen 12 Mar '07

12 Mar '07

http://dovecot.org/releases/dovecot-1.0.rc26.tar.gz http://dovecot.org/releases/dovecot-1.0.rc26.tar.gz.sig Most importantly this should fix mbox problems in recent RCs. * Changed --with-headers to --enable-header-install * If time moves backwards only max. 5 seconds, sleep until we're back in the original present instead of killing ourself. An error is still logged. - IMAP: With namespace prefixes LSUB prefix.* listed INBOX.INBOX. - deliver: Ignore mbox metadata headers from the message input. X-IMAP header crashed deliver. - deliver: If mail_debug=yes, drop out DEBUG environment before calling sendmail binary. Postfix's sendmail didn't really like it. - mbox: X-UID brokeness fixes broke rc25 even with valid X-UID headers. Now the code should finally work right. - Maildir: When syncing a huge maildir, touch dovecot-uidlist.lock file once in a while to make sure it doesn't get overwritten by another process. - Maildir++ quota: We didn't handle NUL bytes in maildirsize files very well. Now the file is rebuilt when they're seen (NFS problem). - Index/view handling fix should fix some crashes/errors - If index files were moved to a different endianess machine, Dovecot logged all sorts of errors instead of silently rebuilding them. - Convert plugin didn't change hierarchy separators in mailbox names. - PostgreSQL authentication could have lost requests once in a while with a heavily loaded server. - Login processes could have crashed in some situations - auth cache crashed with non-plaintext mechanisms

7 14

Re: [Dovecot] separate partition for index/uidlist - Thanks
by Daniel 12 Mar '07

12 Mar '07

Timo Sirainen: > > And what is exactly the use of the so called Quota reporting plugin? > > > It adds IMAP quota commands that can tell the client the current quota > usage and the quota limit. Just wanted to thank you for the kind support, and the great software, so.. thanks! Daniel

1 0

[Dovecot] MySQL database structure
by Erdenebat Gantomor 12 Mar '07

12 Mar '07

In Postfix+Postfixadmin+Dovecot+SASL+MySQL case what is the best and compact MySQL database structure for storing all configuration? What will you suggest me guys? I've already installed postfixadmin and I'm confusing (actually my experience is not enough) extending and organizing my database for postfix+dovecot. Please give me some quick tips. -- Best regards, Erdenebat Guntomor/ /mailto:RkLogin@gmail.com

2 1