- dovecot - dovecot.org

[Dovecot] Restricting IP and/or user access (POP3/IMAP)
by Phil Clare 25 Aug '06

25 Aug '06

Hi, The documentation says to authenticate only from a specific IP or network… if you set this to 127.0.0.1 to indicate the local loop then this effectively blocks every IP address but this one. Since the extra field is in passdb then this would imply it can be done on a per user basis. Have you tried this? Phil ________________________________________ From: dovecot-bounces(a)dovecot.org [mailto:dovecot-bounces@dovecot.org] On Behalf Of Jos Chrispijn Sent: 24 August 2006 15:08 To: dovecot(a)dovecot.org Subject: [Dovecot] Restricting IP and/or user access (POP3/IMAP) Hi, Just new on this mailinglist; I sure hope my questions wouldn't be too dumb for words :-) Q: Restricting IP and/or user access (POP3/IMAP) What I would like to do is blocking some of my user from fetching their mail with neither POP3 nor IMAP. The only way of letting them read/write their e-mail is to be done with my/their Webmail client. On the site of Dovecot I read: 'It's possible to allow user to authenticate only from a specific IP or network. This is especially useful for master users. This can be done by returning allow_nets extra field in passdb.' Actually I am looking for a way of _blocking_ user(names) or certain IP adress(es) instead of _allowing_ certain IP adresses to get their POP3/IMAP mail. Pls could someone hint me out on this? Thanks in advance. Jos -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.405 / Virus Database: 268.11.5/426 - Release Date: 23/08/2006

3 3

[Dovecot] multiple mailboxes in imap
by einKI.ml 24 Aug '06

24 Aug '06

Hi I try to setup a mail server which fetches mails from some pop accounts and presents them through imap (with dovecot) to my local network. I get the mails with getmail at this works as it should. To use dovecot as a pop3 and imap server works too. Now I am trying to setup multiple mailboxes which then should be presented to the user as different folders. I think I have to use namespaces for this (is this correct?) So I tried to configure two namespaces with the following statement. namespace private { separator = / inbox = yes prefix = } namespace private { separator = / prefix = ns location = maildir:/data/server/mail/in/%u/ns } when i try to access the imap server with thunderbird I can receive mails for Inbox but when I want to subscripe an additional folder ns can be seen but is grayed out in thunderbird. To summarize this can anybody give me a hint or example how to configure multiple mailboxes which are located in different directories on the server. thx

1 0

[Dovecot] forward flag metadata
by Tim Schafer 24 Aug '06

24 Aug '06

In testing the migration from courier-imap to dovecot I've discovered that the forward flag on messages isn't kept track of in a standard way. courier-imap seems to keep track of forwarded messages in courierimapkeywords/:list dovecot seems to add an 'a' flag to the filename. Unfortunately this 'a' flag information doesn't seem to be given out by dovecot. It's like it's write only. Is it a bug that dovecot doesn't hand out the "forwarded" metadata? -- Regards, Tim Schafer Information Technology Logistics Easier with Technology Freight Solution Providers direct 916-376-6190 10453 Old Placerville Road fax 916-376-6156 Sacramento, CA 95827 tim_schafer(a)shipfsp.com

3 3

[Dovecot] getting dovecot unwedged
by Scott Murman 24 Aug '06

24 Aug '06

I'm having a problem with the dovecot server. I've upgraded to 1.0rc7 to no avail. My naive view is that a cache file is corrupt, or a lock file cannot be unset. Certain mailboxes cannot be accessed to read or write. Checking the process, the server looks stuck in an infinite poll/wait loop. telnetting directly to the server shows that things are definately amiss, though the original problem may have been caused by a faulty client (Apple Mail or Outlook). My question at this point is how to unwedge the server. Is there a cache repair utility, or a list of files which shouldn't exist? I don't see this info on the Wiki. After sortinig this out, I'm going to install mysql, since this seems to be the more-tested installation. Will dovecot automatically rebuild my current databases or do i need to prepare for sql by hand? -SM-

1 0

[Dovecot] dovecot v1.0 rc7 hung up
by Jack Chen 24 Aug '06

24 Aug '06

It looks like the v.0 RC7 is still not stable. It hangs almost every day. This morning I found that pop3 was not working but imap was working. I know other times when dovecot stop working, neither pop3 and imap worked. I just want to know if other users are getting the same problem.

3 2

[Dovecot] Restricting IP and/or user access (POP3/IMAP)
by Jos Chrispijn 24 Aug '06

24 Aug '06

2 1

[Dovecot] (no subject)
by Joseph D. Wagner 24 Aug '06

24 Aug '06

Ok, I tried: sh -x /etc/rc.d/init.d/dovecot start and it started ok. Then I tried: sh /etc/rc.d/init.d/dovecot start and it started ok too. However, simply using: /etc/rc.d/init.d/dovecot start won't start. On a hunch, I disabled SELinux, and then: /etc/rc.d/init.d/dovecot start started ok. So I have an SELinux problem. Right now I'm doing a filesystem relabel. If that doesn't work, does anyone know where to go from here? Joseph D. Wagner

2 1

[Dovecot] sieve-cvs build failing @ 'make'
by Richard 24 Aug '06

24 Aug '06

-----BEGIN PGP SIGNED MESSAGE----- Hash: RIPEMD160 hi, i've dovecot-cvs up on osx. logging in with virtual users is working. so far so good. i'm attempting to build sieve support now. after: % cd /usr/ports/dovecot/dovecot-sieve % glibtoolize -f -c % autoreconf -i -f configure.in: installing `./install-sh' configure.in: installing `./missing' src/Makefile.am: installing `./depcomp' configure.in: installing `./ylwrap' Makefile.am: installing `./INSTALL' Makefile.am: installing `./COPYING' a: % ./configure \ --prefix=/usr/local/dovecot \ ... --disable-static --enable-shared \ --with-dovecot=/usr/ports/dovecot/dovecot-cvs % make fails @: ... gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/ports/dovecot/dovecot-cvs - -I/usr/ports/dovecot/dovecot-cvs/src/lib - -I/usr/ports/dovecot/dovecot-cvs/src/lib-dict - -I/usr/ports/dovecot/dovecot-cvs/src/lib-mail - -I/usr/ports/dovecot/dovecot-cvs/src/lib-storage - -I/usr/ports/dovecot/dovecot-cvs/src/deliver - -I/usr/local/berkeley-db/include -I/usr/local/cyrus-sasl/include - -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations - -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast - -I/usr/local/ssl/include -MT map.lo -MD -MP -MF .deps/map.Tpo -c map.c - -fno-common -DPIC -o .libs/map.o if /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. - -I. -I.. -I/usr/ports/dovecot/dovecot-cvs - -I/usr/ports/dovecot/dovecot-cvs/src/lib - -I/usr/ports/dovecot/dovecot-cvs/src/lib-dict - -I/usr/ports/dovecot/dovecot-cvs/src/lib-mail - -I/usr/ports/dovecot/dovecot-cvs/src/lib-storage - -I/usr/ports/dovecot/dovecot-cvs/src/deliver - -I/usr/local/berkeley-db/include -I/usr/local/cyrus-sasl/include - -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations - -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast - -I/usr/local/ssl/include -MT sieve-cmu.lo -MD -MP -MF ".deps/sieve-cmu.Tpo" -c -o sieve-cmu.lo sieve-cmu.c; \ then mv -f ".deps/sieve-cmu.Tpo" ".deps/sieve-cmu.Plo"; else rm -f ".deps/sieve-cmu.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/ports/dovecot/dovecot-cvs - -I/usr/ports/dovecot/dovecot-cvs/src/lib - -I/usr/ports/dovecot/dovecot-cvs/src/lib-dict - -I/usr/ports/dovecot/dovecot-cvs/src/lib-mail - -I/usr/ports/dovecot/dovecot-cvs/src/lib-storage - -I/usr/ports/dovecot/dovecot-cvs/src/deliver - -I/usr/local/berkeley-db/include -I/usr/local/cyrus-sasl/include - -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations - -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast - -I/usr/local/ssl/include -MT sieve-cmu.lo -MD -MP -MF .deps/sieve-cmu.Tpo -c sieve-cmu.c -fno-common -DPIC -o .libs/sieve-cmu.o sieve-cmu.c: In function 'get_flags': sieve-cmu.c:181: error: 'array_t' undeclared (first use in this function) sieve-cmu.c:181: error: (Each undeclared identifier is reported only once sieve-cmu.c:181: error: for each function it appears in.) sieve-cmu.c:181: error: parse error before 'union' sieve-cmu.c:181: warning: unused variable 'v_modifiable' sieve-cmu.c:181: warning: unused variable 'v' sieve-cmu.c:178: warning: unused parameter 'sieve_flags' sieve-cmu.c:179: warning: unused parameter 'flags_r' sieve-cmu.c:179: warning: unused parameter 'keywords_r' sieve-cmu.c: At top level: sieve-cmu.c:181: warning: type defaults to 'int' in declaration of 'keywords' sieve-cmu.c:181: warning: data definition has no type or storage class sieve-cmu.c:185: warning: type defaults to 'int' in declaration of 'flags_r' sieve-cmu.c:185: warning: data definition has no type or storage class sieve-cmu.c:187: error: parse error before 'void' sieve-cmu.c:187: warning: type defaults to 'int' in declaration of '_array_tmp' sieve-cmu.c:187: warning: initialization makes integer from pointer without a cast sieve-cmu.c:187: warning: data definition has no type or storage class sieve-cmu.c:187: error: parse error before '&' token sieve-cmu.c:193: error: parse error before '&' token sieve-cmu.c:209: warning: type defaults to 'int' in declaration of 'name' sieve-cmu.c:209: error: conflicting types for 'name' sieve-cmu.c:182: error: previous declaration of 'name' was here sieve-cmu.c:209: warning: initialization makes integer from pointer without a cast sieve-cmu.c:209: warning: data definition has no type or storage class sieve-cmu.c:210: error: parse error before 'void' sieve-cmu.c:210: error: parse error before '&' token sieve-cmu.c:212: warning: type defaults to 'int' in declaration of 'keywords_r' sieve-cmu.c:212: error: request for member 'arr' in something not a structure or union sieve-cmu.c:213: error: request for member 'v' in something not a structure or union sieve-cmu.c:213: error: request for member 'arr' in something not a structure or union sieve-cmu.c:213: warning: type defaults to 'int' in declaration of 'type name' sieve-cmu.c:213: warning: cast from function call of type 'const void *' to non-matching type 'int' sieve-cmu.c:213: warning: pointer/integer type mismatch in conditional expression sieve-cmu.c:213: error: initializer element is not constant sieve-cmu.c:213: warning: data definition has no type or storage class sieve-cmu.c:214: error: parse error before '}' token make[3]: *** [sieve-cmu.lo] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 - -- /"\ \ / ASCII Ribbon Campaign X against HTML email, vCards / \ & micro$oft attachments [GPG] OpenMacNews at gmail dot com fingerprint: 50C9 1C46 2F8F DE42 2EDB D460 95F7 DDBD 3671 08C6 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (Darwin) iEYEAREDAAYFAkTpGRwACgkQlffdvTZxCMaAaQCeJVgg9SIx2iezvPwtHGZVghQE h4wAniYsJU//3a010k0bO0p9me8RHIGz =6Dh0 -----END PGP SIGNATURE-----

4 4

[Dovecot] Problems with dovecot 1.0rc5 + MySQL 5.0.24
by Daniel Torreblanca 24 Aug '06

24 Aug '06

Hi all, I'm having an intermittent problem logging users in through a webmail client (RoundCube). My maillog reports this: auth(default): vmysql: sql error[3]: MySQL server has gone away imap-login: Disconnected: user=<sales(a)coppersinkdepot.com>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured The MySQL server hasn't gone anywhere, I can log into it fine and other apps report no problems with it. Restarting Dovecot fixes this issue, but it'll just happen again later. I'm on OpenBSD 3.9 using vpopmail. I've looked through the mailing list archives but can't find any info on this specific problem. Any ideas?

3 3

Re: [Dovecot] 0.99.14-1.1.el3 vs 1.0-0_20.rc7.el3
by Esquivel, Vicente 23 Aug '06

23 Aug '06

I am sorry maybe I confused all of you, but I am not running them side by side. What I did was install one rpm and uninstall it then install 1.0 and then uninstall it. Testing the individually when installed. Vicente ________________________________ From: dovecot-bounces(a)dovecot.org [mailto:dovecot-bounces@dovecot.org] On Behalf Of Jeff Graves Sent: Wednesday, August 23, 2006 4:54 PM To: dovecot(a)dovecot.org Subject: Re: [Dovecot] 0.99.14-1.1.el3 vs 1.0-0_20.rc7.el3 The config files are different of 0.99 and 1.0 (and I'm not sure you can run them side by side). Delete the config for 0.99 and install just 1.0rc7 and modify it's config. You may also need to delete the index files and recreate the subscriptions file as I don't think they're compatible. -- Jeff Graves, MCSA Image Source, Inc. 508.966.5200 x31 www.image-src.com -----Original Message----- From: dovecot-bounces(a)dovecot.org [mailto:dovecot-bounces@dovecot.org] On Behalf Of Esquivel, Vicente Sent: Wednesday, August 23, 2006 4:27 PM To: Dovecot Mailing List Subject: Re: [Dovecot] 0.99.14-1.1.el3 vs 1.0-0_20.rc7.el3 Anyone else see something similar to this? Vicente ________________________________ From: dovecot-bounces(a)dovecot.org [mailto:dovecot-bounces@dovecot.org] On Behalf Of Esquivel, Vicente Sent: Wednesday, August 23, 2006 8:39 AM To: Dovecot Mailing List Subject: [Dovecot] 0.99.14-1.1.el3 vs 1.0-0_20.rc7.el3 Hello all, I am new to the list so bear with me. I am testing dovecot out on a test server running RHEL ES 3, I have installed 0.99.14-1.1.el3 and 1.0-0_20.rc7.el3. This server is using the mbox mailbox format, running sendmail, procmail, and using PAM to do authentication to an LDAP server. I get varying results between the two version. 0.99.14-1.1.el3 : Upon installing this I leave the defaults and login just fine, I can view mail just fine via outlook express and thunderbird. 1.0-0_20.rc7.el3: Upon installing this I leave the defaults and login just fine but I cannot view my email via outlook express or thunderbird. The logs indicate that it reads my inbox with no errors but I still cannot see anything. Can anyone please help me with this. Thanks Vicente

1 0