- dovecot - dovecot.org

[Dovecot] move the message between folder problem with quota.
by Antonio Casado Rodríguez 07 Nov '06

07 Nov '06

Hi, i have dovecot 1.0rc12, postfix, RedHat Enterprise Linux ES 4.0 Update 4. IMAP client Thunderbird 1.5.0.7 Only namespace: namespace private { separator = / inbox = yes prefix = location = maildir:~/Maildir/ } When the quota limit is near... more maildirsize 5242880S 0 0 2688058 1 1993336 1 ... if i move the message betweeen foders, dovecot say: quota exceeded. Is this a error? If i delete the message (trash folder), it not work too. would not have to work as Maildir++ specification says? http://www.inter7.com/courierimap/README.maildirquota.html (Reading from a Maildir++) Thanks a lot.

2 1

[Dovecot] rc12 dovecot-auth core dump with ldap
by Chris Wakelin 07 Nov '06

07 Nov '06

Hi, I've got a core dump during initialisation when I use 1.0.rc12 and LDAP with authenticated binds in Solaris. It worked OK in 1.0.rc10. Here's the non-commented entries in dovecot-ldap.conf - some of which are probably redundant :) :- hosts = xxx.yyy.rdg.ac.uk auth_bind = yes auth_bind_userdn = "cn=%n,cn=users,dc=xxx,dc=yyy,dc=rdg,dc=ac,dc=uk" ldap_version = 3 base = "dc=xxx,dc=yyy,dc=rdg,dc=ac,dc=uk" deref = never scope = subtree user_filter = (&(objectClass=User)(sAMAccountName=%n)) pass_filter = (&(objectClass=User)(sAMAccountName=%n)) Strangely, it crashes in a different place when I don't define the scope, so I'm guessing it's something to do with reading parameters. backtrace with "scope = subtree" : #0 0x1ec94 in db_ldap_init ( config_path=0x5bc08 "/opt/RDGdovect/etc/dovecot-ldap.conf") at db-ldap.c:661 661 if (*conn->set.user_global_gid == '\0') (gdb) bt #0 0x1ec94 in db_ldap_init ( config_path=0x5bc08 "/opt/RDGdovect/etc/dovecot-ldap.conf") at db-ldap.c:661 #1 0x246e8 in passdb_ldap_preinit (auth_passdb=0x5bbe8, args=0x5bc08 "/opt/RDGdovect/etc/dovecot-ldap.conf") at passdb-ldap.c:486 #2 0x2328c in passdb_preinit (auth=0x5b838, driver=0xffbefec0 "ldap", args=0x0, id=332176) at passdb.c:169 #3 0x17648 in auth_preinit () at auth.c:45 #4 0x1ff0c in drop_privileges () at main.c:195 #5 0x2024c in main (argc=0, argv=0xffbefb54) at main.c:319 and with scope left commented out: #0 0xff0cf600 in strcasecmp () from /usr/lib/libc.so.1 (gdb) bt #0 0xff0cf600 in strcasecmp () from /usr/lib/libc.so.1 #1 0x1df58 in scope2str (str=0x0) at db-ldap.c:116 #2 0x1ec4c in db_ldap_init ( config_path=0x5bc08 "/opt/RDGdovect/etc/dovecot-ldap.conf") at db-ldap.c:648 #3 0x246e8 in passdb_ldap_preinit (auth_passdb=0x5bbe8, args=0x5bc08 "/opt/RDGdovect/etc/dovecot-ldap.conf") at passdb-ldap.c:486 #4 0x2328c in passdb_preinit (auth=0x5b838, driver=0xffbefec0 "ldap", args=0x0, id=332176) at passdb.c:169 #5 0x17648 in auth_preinit () at auth.c:45 #6 0x1ff0c in drop_privileges () at main.c:195 #7 0x2024c in main (argc=0, argv=0xffbefb54) at main.c:319 If I don't define "deref" then I get an error in the dovecot log (but no crash) :- dovecot: Nov 07 12:36:45 Error: auth(default): LDAP: Unknown deref option 'subtree' I'll keep digging and see if I can find the cause, but has anybody else seen this? Chris -- --+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+- Christopher Wakelin, c.d.wakelin(a)reading.ac.uk IT Services Centre, The University of Reading, Tel: +44 (0)118 378 8439 Whiteknights, Reading, RG6 2AF, UK Fax: +44 (0)118 975 3094

2 1

[Dovecot] suspected bug in dovecot-ldap setup?
by Pedro Venda 07 Nov '06

07 Nov '06

Hi everyone, [first post: long and boring. beware!] I've been working on a virtual multidomain MX server with pop3 access. Accounting for users/domains is done via OpenLDAP with the Jamm[1] schema and dovecot is 1.0rc10 (dovecot-1.0-0_27.rc10.el4.at fetched as RPM from atrpms.net for CentOS 4.4). I intended to have authenticated binds but there was a problem with the user_filter directive being ignored: user_filter = (&(objectClass=JammMailAccount)(mail=%n@%d)(accountActive=TRUE) (delete=FALSE)) dovecot: Oct 26 16:20:58 Info: auth(default): client in: AUTH 1 PLAIN service=IMAP secured lip=::ffff:192.168.0.5 rip=::ffff:192.168.0.69 resp=<hidden> dovecot: Oct 26 16:20:58 Info: auth(default): ldap(dave@info.test,::ffff:192.168.0.69): bind search: base=o=hosting,dc=example,dc=com scope=subtree filter= **(&(objectClass=posixAccount(uid=dave(a)info.test))** dovecot: Oct 26 16:20:58 Info: auth(default): ldap(dave@info.test,::ffff:192.168.0.69): unknown user dovecot: Oct 26 16:20:59 Info: auth(default): client out: FAIL 1 user=dave(a)info.test dovecot: Oct 26 16:20:59 Info: imap-login: Disconnected: user=<dave(a)info.test>, method=PLAIN, rip=::ffff:192.168.0.69, lip=::ffff:192.168.0.5, TLS (nevermind the data, it's test only) As you can see from the info file, the search filter used was being (&(objectClass=posixAccount(uid=dave(a)info.test)) and not (&(objectClass=JammMailAccount)(mail=dave(a)info.test)(accountActive=TRUE) (delete=FALSE)). I sorted this out by trying to enable auth_bind_userdn: auth_bind_userdn = mail=%n@%d,jvd=%d,o=hosting,dc=example,dc=com Now, the login worked well and the debug info is as follows: dovecot: Oct 27 12:01:48 Info: auth(default): client in: AUTH 1 PLAIN service=IMAP lip=::ffff:192.168.0.5 rip=::ffff:192.168.0.69 resp=AGRhdmVAaW5mb y50ZXN0AFRlbXAuMTIz dovecot: Oct 27 12:01:48 Info: auth(default): client out: OK 1 user=dave(a)info.test dovecot: Oct 27 12:01:48 Info: auth(default): master in: REQUEST 1 10634 1 dovecot: Oct 27 12:01:48 Info: auth(default): ldap(dave@info.test,::ffff:192.168.0.69): base=o=hosting,dc=example,dc=com scope=subtree filter=(&(objectClass=JammMailAccount)(mail=dave(a)info.test) (accountActive=TRUE)(delete=FALSE)) fields=mailbox dovecot: Oct 27 12:01:48 Info: auth(default): master out: USER 1 dave(a)info.test mail=info.test/dave/ uid=5000 gid=5000 (nevermind the debug data, passwords, etc. it's test only) In this case, the search filter is ok: (&(objectClass=JammMailAccount)(mail=dave(a)info.test)(accountActive=TRUE) (delete=FALSE)) So aparently, the auth_bind_userdn directive that supposedly adds a performance gain by sparing one bind request, seems to interfere with the user_filter directive. I suspect this might be a bug, so here's my report. Is this a new issue? Thanks for surviving this far through this post, Best regards, Pedro Venda. [1]: [Java Mail Manager]: web applications to manage virtual email account information stored in an LDAP directory. (http://jamm.sourceforge.net) -- Pedro João Lopes Venda email: pjvenda at pjvenda org http://www.pjvenda.org

2 5

[Dovecot] Store outgoing mail in users mailbox
by Mark Ruys 07 Nov '06

07 Nov '06

This might be a MTA question, but because I use Dovecot as an LDA, maybe some can help me here. Our users would like that outgoing mail is automatically saved in some folder, say Sent. We use Postfix with virtual domains, Maildir and Dovecot+Sieve as LDA. Outgoing mail is relayed by our imap-server (with authentification of course, no open relay). Most people seem to advice Postfix sender_bcc_maps and Dovecot's deliver with the -m argument. But I can't get it work. I tried: In master.cf: dovecot-archive unix - n n - - pipe flags=DRhu user=mailowner:mailowner argv=/usr/libexec/dovecot/deliver -d ${recipient} -m Sent In main.cf: sender_bcc_maps = hash:/etc/postfix/sender_bcc_map In sender_bcc_map: tester(a)ruijs.cc dovecot-archive: But that doesn't work. It looks like "dovecot-archive:" should be a real email address, not a transport (this give an idea of my Postfix knowledge ;). Then I tried: In sender_bcc_map: tester(a)ruijs.cc tester+archive(a)ruijs.cc But I don't think Dovecot's LDA supports plus addressing. So my question is, has anyone here done a similar thing in a similar setting. If so, how did you configure it. Thans, Mark Oudenhof 14b, 4191 NW Geldermalsen, The Netherlands Web site and travel directions: www.in2sports.net Phone +31.345.473699 :: Mobile +31.6.51298623

2 1

[Dovecot] Upgrade from RC7 to RC10 didn't go too well...
by Ivo Truxa 06 Nov '06

06 Nov '06

I have the same problem after upgrading to RC10. Did you find a solution? Should I update to RC11 or rather downgrade back to an earlier version? Thanks, Ivo Truxa >>>>>>> original message >>>>>>> Hi, On the weekend I tried to upgrade from RC7 to RC10. Clearly, I have to change some things before I can do this. What does it take to get to RC10? As is, my mail client got an error trying to list messages in /INBOX (via IMAP) and the mail.err log shows the following messages: Oct 29 10:27:32 siona dovecot: IMAP(archangel): open(/var/mail/archangel/inbox, O_CREAT) failed: Not a directory Oct 29 10:27:32 siona dovecot: IMAP(archangel): mkdir_parents(/var/mail/archangel/.imap/INBOX) failed: Not a directory Oct 29 10:27:32 siona dovecot: IMAP(archangel): open() failed with subscription file /var/mail/archangel/.subscriptions: Not a directory My dovecot.conf includes default_mail_env = mbox:/var/mail/%u And other then enabling SSL, I've got a pretty vanilla configuration (e.g. nothing in the IMAP section at all, no odd namespaces...) /var/mail/archangel is an mbox file, why is dovecot trying to open files under there? I know at least part of the discussion has happened on the list before so I'm sorry for duplicating other questions. My TODO is about ten km long so I hope someone can at least give me a couple good pointers. Thanks in advance! -- Dominic Lepiane The IRMACS Centre

3 2

[Dovecot] v1.0 plans, rc11 tomorrow
by Timo Sirainen 05 Nov '06

05 Nov '06

As you can probably guess from my today's burst of activity, I'm no longer extremely busy. Actually it looks like for the next 3-4 weeks I don't have anything especially time consuming to do. So it's time to get Dovecot v1.0 released :) I've now read all the mails from this list again, and it looks like pretty much the only problems with rc10 was the mbox assert crash, which is now fixed. My TODO contains: v1.0 blocker: - inetd logins are broken? I should look more into this.. I only remembered this just now while writing this mail. New non-v1.0 blockers: - trash plugin is apparently broken? - mbox_min_index_size != 0 causes Invalid new transaction log sequence (4 >= 4) The old preferrably-fixed-for-v1.0 items are: - ldap auth is leaking memory? maybe not, maybe it's something else. - master leaks log fds with kqueue. I don't have a machine to test this on. Could someone give me an account in some BSD system for a while to test this? Anyway, I'll most likely release rc11 tomorrow, but it would be nice if you tested today's CVS snapshot already to see if I accidentally broke something. :) http://dovecot.org/nightly/dovecot-latest.tar.gz Oh and one thing that I wanted for Dovecot v1.0 was nice documentation. I think the current wiki is a bit chaotic. I started http://wiki.dovecot.org/NewIndex a long time ago. Maybe I should finish it finally and put it as the new main index..

9 16

[Dovecot] Auto-expire messages in a folder
by Mike Cisar 05 Nov '06

05 Nov '06

I have a Fedora 5 server running Dovecot (currently 1.0 rc10). The spam filter (amavis) automatically tags email (using plussed addressing) such that messages flagged as spam are sorted into a "spambox" folder by procmail. Seemed like a good idea at the time, but because of some legacy issues with filesystem quota also being in place, combined with most users connecting with POP3 rather than IMAP... spam doesn't stay in their inbox, they don't check their spambox and they are very quickly over quota. What I would like to do is stick with the "spambox" folder idea, but have any messages in that folder which are older than a certain number of days deleted automatically. Could this be done by Dovecot? If so how would dovecot know to visit all the user's mailboxes to do it... or would it only be able to do so when a user logged in via IMAP (as opposed to POP3)? If not, is anyone aware of a script that I could run in nightly maintenance to do a cleanup pass on all the mailboxes? I know there are any number of ways that this could be accomplished but I would like to do it as much within my existing framework as possible... sendmail/procmail/amavis on the delivery side, dovecot in the middle, horde/imp for webmail and whatever email client the end users have (likely Outlook/Outlook Express for the most part)... all pretty generic, standard mailbox formats... nothing fancy like data stored in mySQL or anything like that. As everyone encounters, the more parts you change, the more other parts you have to fix to be compatible with the changes :-) Obviously I would like the solution to also be as feature rich as I can at the same time (might as well wish for it all right :-). Maybe for the sake of the POP3 folks it would also be nice to generate a once-daily email with the names, subjects of the messages in the folder saying "here's what is in your spam folder, please log in to webmail to manage your spam" (and in a perfect world some sort of link to click on which could move the message from the spambox back into the inbox). Does anyone have any solutions they can share that run within a similar framework to what I have set up? The thing that I need in the immediate term is to purge the spam folder automatically, the mid-term goal is to evolve that into a sort of spam-processing center/solution for the users. Thanks for any suggestions! Cheers, >>>>> Mike <<<<<

3 2

[Dovecot] ~/.maildir preferable to %h/Maildir and ~/Maildir?
by Jeff Kowalczyk 05 Nov '06

05 Nov '06

I have a recently deployed dovecot server and am readying another. Upon updating to rc12, I note the following change in the default dovecot.conf file: -default_mail_env = mbox:/var/spool/mail/%u:INDEX=/var/dovecot/%u +mail_location = maildir:~/.maildir Integrating this change to my local dovecot.conf: # formerly used default_mail_env = maildir:%h/Maildir # dovecot default mail_location = maildir:~/.maildir mail_location = maildir:~/Maildir With unix users of the form: myuser:x:505:100:My User:/home/myuser:/sbin/nologin each having ~/Maildir, should I: 1) use the ~/.maildir form over ~/Maildir. 2) use the ~ instead of %h 3) do anything for dovecot's benefit (reindex, etc.) besides a per-user 'mv ~/Maildir ~/.maildir' if 1). I came straight from an ancient sendmail mbox setup to dovecot, so I want to do things the best-pracitce IMAP/dovecot way. Thanks.

3 4

[Dovecot] RC11 Build Failure on FreeBSD 6.1
by Tim Wilde 05 Nov '06

05 Nov '06

I just ran into a build failure on Dovecot 1.0RC11 on FreeBSD 6.1. Identical command sequence for the build worked fine for RC10. uname -a: FreeBSD thor.krellis.org 6.1-RELEASE-p5 FreeBSD 6.1-RELEASE-p5 #0: Fri Sep 1 01:47:32 EDT 2006 root@jail7.jvds.com:/usr/obj/usr/src/sys/JAIL7 i386 Configured with a straight ./configure, no options, no problems reported during configure, but make failed with: if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT mountpoint.o -MD -MP -MF ".deps/mountpoint.Tpo" -c -o mountpoint.o mountpoint.c; then mv -f ".deps/mountpoint.Tpo" ".deps/mountpoint.Po"; else rm -f ".deps/mountpoint.Tpo"; exit 1; fi mountpoint.c:11:30: #if with no expression mountpoint.c:40: warning: unused parameter 'path' mountpoint.c:40: warning: unused parameter 'pool' *** Error code 1 Stop in /usr/home/tim/build/dovecot-1.0.rc11/src/lib. *** Error code 1 Stop in /usr/home/tim/build/dovecot-1.0.rc11/src. *** Error code 1 Stop in /usr/home/tim/build/dovecot-1.0.rc11. *** Error code 1 Stop in /usr/home/tim/build/dovecot-1.0.rc11. Full output of everything I did after untarring (I apologize in advance for any bad wrapping, I can attach as text/plain if necessary for diagnosis): [tim@thor ~/build/dovecot-1.0.rc11]$ ./configure checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... no checking for nawk... nawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for style of include used by make... GNU checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for library containing strerror... none required checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking dependency style of gcc... (cached) gcc3 checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for inline... inline checking build system type... i386-unknown-freebsd6.1 checking host system type... i386-unknown-freebsd6.1 checking for a sed that does not truncate output... /usr/bin/sed checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognise dependent libraries... pass_all checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking how to run the C++ preprocessor... g++ -E checking for g77... no checking for f77... f77 checking whether we are using the GNU Fortran 77 compiler... yes checking whether f77 accepts -g... yes checking the maximum length of command line arguments... 196608 checking command to parse /usr/bin/nm -B output from gcc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... yes checking dynamic linker characteristics... freebsd6.1 ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by g++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC checking if g++ PIC flag -fPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... freebsd6.1 ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for f77 option to produce PIC... -fPIC checking if f77 PIC flag -fPIC works... yes checking if f77 static flag -static works... yes checking if f77 supports -c -o file.o... yes checking whether the f77 linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... freebsd6.1 ld.so checking how to hardcode library paths into programs... immediate checking for ld used by GCC... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... /usr/local/bin/bash: ./config.rpath: No such file or directory done checking for iconv... no, consider installing GNU libiconv checking for strings.h... (cached) yes checking for stdint.h... (cached) yes checking for unistd.h... (cached) yes checking dirent.h usability... yes checking dirent.h presence... yes checking for dirent.h... yes checking sys/uio.h usability... yes checking sys/uio.h presence... yes checking for sys/uio.h... yes checking sys/sysmacros.h usability... no checking sys/sysmacros.h presence... no checking for sys/sysmacros.h... no checking sys/resource.h usability... yes checking sys/resource.h presence... yes checking for sys/resource.h... yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking libgen.h usability... yes checking libgen.h presence... yes checking for libgen.h... yes checking sys/quota.h usability... no checking sys/quota.h presence... no checking for sys/quota.h... no checking sys/fs/ufs_quota.h usability... no checking sys/fs/ufs_quota.h presence... no checking for sys/fs/ufs_quota.h... no checking ufs/ufs/quota.h usability... yes checking ufs/ufs/quota.h presence... yes checking for ufs/ufs/quota.h... yes checking jfs/quota.h usability... no checking jfs/quota.h presence... no checking for jfs/quota.h... no checking mntent.h usability... no checking mntent.h presence... no checking for mntent.h... no checking sys/mnttab.h usability... no checking sys/mnttab.h presence... no checking for sys/mnttab.h... no checking sys/event.h usability... yes checking sys/event.h presence... yes checking for sys/event.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking sys/mkdev.h usability... no checking sys/mkdev.h presence... no checking for sys/mkdev.h... no checking linux/dqblk_xfs.h usability... no checking linux/dqblk_xfs.h presence... no checking for linux/dqblk_xfs.h... no checking xfs/xqm.h usability... no checking xfs/xqm.h presence... no checking for xfs/xqm.h... no checking sasl.h usability... no checking sasl.h presence... no checking for sasl.h... no checking sasl/sasl.h usability... no checking sasl/sasl.h presence... no checking for sasl/sasl.h... no checking for socket... yes checking for inet_addr... yes checking for fdatasync... no checking for fdatasync in -lrt... no checking for fcntl... yes checking for flock... yes checking for lockf... yes checking for inet_aton... yes checking for sigaction... yes checking for getpagesize... yes checking for madvise... yes checking for strcasecmp... yes checking for stricmp... no checking for vsnprintf... yes checking for vsyslog... yes checking for writev... yes checking for pread... yes checking for setrlimit... yes checking for setproctitle... yes checking for seteuid... yes checking for setreuid... yes checking for setegid... yes checking for setresgid... yes checking for strtoull... yes checking for strtouq... yes checking for setpriority... yes checking for quotactl... yes checking for getmntent... no checking for kqueue... yes checking for kevent... yes checking for getrusage... yes checking for poll... yes checking if we can use inotify... "no" checking if we can use dnotify... "no" checking for int... yes checking size of int... 4 checking for long... yes checking size of long... 4 checking for void *... yes checking size of void *... 4 checking for long long... yes checking size of long long... 8 checking for _Bool... yes checking for uoff_t... no checking type of off_t... long long checking whether size_t is signed... no checking type of size_t... unsigned int checking for stdint.h... (cached) yes checking for uintmax_t... yes checking for uint_fast32_t... yes checking for socklen_t... yes checking for /dev/urandom... yes checking for tm_gmtoff... yes checking how large time_t values gmtime() accepts... 32 checking for struct iovec... yes checking Linux compatible mremap()... no checking whether shared mmaps get updated by write()s... yes checking whether fd passing works... yes checking for sendfile in -lsendfile... no checking Linux compatible sendfile()... no checking FreeBSD compatible sendfile()... yes checking if we should use _XPG6 macro for crypt()... yes checking if statvfs.f_mntfromname exists... no checking if statfs.f_mntfromname exists... yes checking if struct dqblk.dqb_curblocks exists... yes checking if struct dqblk.dqb_curspace exists... no checking if struct Q_QUOTACTL ioctl exists... no checking for an implementation of va_copy()... yes checking for an implementation of __va_copy()... no checking whether va_lists can be copied by value... yes checking for SSL_read in -lssl... yes checking openssl/ssl.h usability... yes checking openssl/ssl.h presence... yes checking for openssl/ssl.h... yes checking openssl/err.h usability... yes checking openssl/err.h presence... yes checking for openssl/err.h... yes checking for getspnam... no checking for pam_start in -lpam... yes checking security/pam_appl.h usability... yes checking security/pam_appl.h presence... yes checking for security/pam_appl.h... yes checking pam/pam_appl.h usability... no checking pam/pam_appl.h presence... no checking for pam/pam_appl.h... no checking for pam_setcred in -lpam... yes checking for auth_userokay... no checking for vpopmail configuration at ~vpopmail/etc/lib_deps... not found checking for crypt in -lcrypt... yes checking for dlopen... yes checking whether byte ordering is bigendian... no checking for IPv6... yes checking zlib.h usability... yes checking zlib.h presence... yes checking for zlib.h... yes configure: creating ./config.status config.status: creating Makefile config.status: creating doc/Makefile config.status: creating src/Makefile config.status: creating src/lib/Makefile config.status: creating src/lib-sql/Makefile config.status: creating src/lib-auth/Makefile config.status: creating src/lib-charset/Makefile config.status: creating src/lib-dict/Makefile config.status: creating src/lib-imap/Makefile config.status: creating src/lib-index/Makefile config.status: creating src/lib-mail/Makefile config.status: creating src/lib-ntlm/Makefile config.status: creating src/lib-settings/Makefile config.status: creating src/lib-storage/Makefile config.status: creating src/lib-storage/index/Makefile config.status: creating src/lib-storage/index/maildir/Makefile config.status: creating src/lib-storage/index/mbox/Makefile config.status: creating src/lib-storage/index/dbox/Makefile config.status: creating src/lib-storage/subscription-file/Makefile config.status: creating src/lib-storage/register/Makefile config.status: creating src/auth/Makefile config.status: creating src/deliver/Makefile config.status: creating src/dict/Makefile config.status: creating src/imap/Makefile config.status: creating src/imap-login/Makefile config.status: creating src/login-common/Makefile config.status: creating src/master/Makefile config.status: creating src/pop3/Makefile config.status: creating src/pop3-login/Makefile config.status: creating src/util/Makefile config.status: creating src/plugins/Makefile config.status: creating src/plugins/acl/Makefile config.status: creating src/plugins/convert/Makefile config.status: creating src/plugins/quota/Makefile config.status: creating src/plugins/imap-quota/Makefile config.status: creating src/plugins/trash/Makefile config.status: creating src/plugins/zlib/Makefile config.status: creating stamp.h config.status: creating dovecot-config.in config.status: creating config.h config.status: executing depfiles commands Install prefix ...................... : /usr/local File offsets ........................ : 64bit I/O loop method ..................... : poll File change notification method ..... : none Building with SSL support ........... : yes (OpenSSL) Building with IPv6 support .......... : yes Building with pop3 server ........... : yes Building with mail delivery agent .. : yes Building with GSSAPI support ........ : no Building with user database modules . : static prefetch passwd passwd-file checkpassword (modules) Building with password lookup modules : passwd passwd-file pam checkpassword (modules) Building with SQL drivers ............: [tim@thor ~/build/dovecot-1.0.rc11]$ make make all-recursive Making all in src Making all in lib if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT base64.o -MD -MP -MF ".deps/base64.Tpo" -c -o base64.o base64.c; then mv -f ".deps/base64.Tpo" ".deps/base64.Po"; else rm -f ".deps/base64.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT bsearch-insert-pos.o -MD -MP -MF ".deps/bsearch-insert-pos.Tpo" -c -o bsearch-insert-pos.o bsearch-insert-pos.c; then mv -f ".deps/bsearch-insert-pos.Tpo" ".deps/bsearch-insert-pos.Po"; else rm -f ".deps/bsearch-insert-pos.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT buffer.o -MD -MP -MF ".deps/buffer.Tpo" -c -o buffer.o buffer.c; then mv -f ".deps/buffer.Tpo" ".deps/buffer.Po"; else rm -f ".deps/buffer.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT close-keep-errno.o -MD -MP -MF ".deps/close-keep-errno.Tpo" -c -o close-keep-errno.o close-keep-errno.c; then mv -f ".deps/close-keep-errno.Tpo" ".deps/close-keep-errno.Po"; else rm -f ".deps/close-keep-errno.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT compat.o -MD -MP -MF ".deps/compat.Tpo" -c -o compat.o compat.c; then mv -f ".deps/compat.Tpo" ".deps/compat.Po"; else rm -f ".deps/compat.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT data-stack.o -MD -MP -MF ".deps/data-stack.Tpo" -c -o data-stack.o data-stack.c; then mv -f ".deps/data-stack.Tpo" ".deps/data-stack.Po"; else rm -f ".deps/data-stack.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT env-util.o -MD -MP -MF ".deps/env-util.Tpo" -c -o env-util.o env-util.c; then mv -f ".deps/env-util.Tpo" ".deps/env-util.Po"; else rm -f ".deps/env-util.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT failures.o -MD -MP -MF ".deps/failures.Tpo" -c -o failures.o failures.c; then mv -f ".deps/failures.Tpo" ".deps/failures.Po"; else rm -f ".deps/failures.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT fd-close-on-exec.o -MD -MP -MF ".deps/fd-close-on-exec.Tpo" -c -o fd-close-on-exec.o fd-close-on-exec.c; then mv -f ".deps/fd-close-on-exec.Tpo" ".deps/fd-close-on-exec.Po"; else rm -f ".deps/fd-close-on-exec.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT fd-set-nonblock.o -MD -MP -MF ".deps/fd-set-nonblock.Tpo" -c -o fd-set-nonblock.o fd-set-nonblock.c; then mv -f ".deps/fd-set-nonblock.Tpo" ".deps/fd-set-nonblock.Po"; else rm -f ".deps/fd-set-nonblock.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT fdpass.o -MD -MP -MF ".deps/fdpass.Tpo" -c -o fdpass.o fdpass.c; then mv -f ".deps/fdpass.Tpo" ".deps/fdpass.Po"; else rm -f ".deps/fdpass.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT file-cache.o -MD -MP -MF ".deps/file-cache.Tpo" -c -o file-cache.o file-cache.c; then mv -f ".deps/file-cache.Tpo" ".deps/file-cache.Po"; else rm -f ".deps/file-cache.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT file-copy.o -MD -MP -MF ".deps/file-copy.Tpo" -c -o file-copy.o file-copy.c; then mv -f ".deps/file-copy.Tpo" ".deps/file-copy.Po"; else rm -f ".deps/file-copy.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT file-dotlock.o -MD -MP -MF ".deps/file-dotlock.Tpo" -c -o file-dotlock.o file-dotlock.c; then mv -f ".deps/file-dotlock.Tpo" ".deps/file-dotlock.Po"; else rm -f ".deps/file-dotlock.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT file-lock.o -MD -MP -MF ".deps/file-lock.Tpo" -c -o file-lock.o file-lock.c; then mv -f ".deps/file-lock.Tpo" ".deps/file-lock.Po"; else rm -f ".deps/file-lock.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT file-set-size.o -MD -MP -MF ".deps/file-set-size.Tpo" -c -o file-set-size.o file-set-size.c; then mv -f ".deps/file-set-size.Tpo" ".deps/file-set-size.Po"; else rm -f ".deps/file-set-size.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT hash.o -MD -MP -MF ".deps/hash.Tpo" -c -o hash.o hash.c; then mv -f ".deps/hash.Tpo" ".deps/hash.Po"; else rm -f ".deps/hash.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT hex-binary.o -MD -MP -MF ".deps/hex-binary.Tpo" -c -o hex-binary.o hex-binary.c; then mv -f ".deps/hex-binary.Tpo" ".deps/hex-binary.Po"; else rm -f ".deps/hex-binary.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT hex-dec.o -MD -MP -MF ".deps/hex-dec.Tpo" -c -o hex-dec.o hex-dec.c; then mv -f ".deps/hex-dec.Tpo" ".deps/hex-dec.Po"; else rm -f ".deps/hex-dec.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT hmac-md5.o -MD -MP -MF ".deps/hmac-md5.Tpo" -c -o hmac-md5.o hmac-md5.c; then mv -f ".deps/hmac-md5.Tpo" ".deps/hmac-md5.Po"; else rm -f ".deps/hmac-md5.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT home-expand.o -MD -MP -MF ".deps/home-expand.Tpo" -c -o home-expand.o home-expand.c; then mv -f ".deps/home-expand.Tpo" ".deps/home-expand.Po"; else rm -f ".deps/home-expand.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT hostpid.o -MD -MP -MF ".deps/hostpid.Tpo" -c -o hostpid.o hostpid.c; then mv -f ".deps/hostpid.Tpo" ".deps/hostpid.Po"; else rm -f ".deps/hostpid.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT imem.o -MD -MP -MF ".deps/imem.Tpo" -c -o imem.o imem.c; then mv -f ".deps/imem.Tpo" ".deps/imem.Po"; else rm -f ".deps/imem.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT iostream.o -MD -MP -MF ".deps/iostream.Tpo" -c -o iostream.o iostream.c; then mv -f ".deps/iostream.Tpo" ".deps/iostream.Po"; else rm -f ".deps/iostream.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT istream.o -MD -MP -MF ".deps/istream.Tpo" -c -o istream.o istream.c; then mv -f ".deps/istream.Tpo" ".deps/istream.Po"; else rm -f ".deps/istream.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT istream-data.o -MD -MP -MF ".deps/istream-data.Tpo" -c -o istream-data.o istream-data.c; then mv -f ".deps/istream-data.Tpo" ".deps/istream-data.Po"; else rm -f ".deps/istream-data.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT istream-file.o -MD -MP -MF ".deps/istream-file.Tpo" -c -o istream-file.o istream-file.c; then mv -f ".deps/istream-file.Tpo" ".deps/istream-file.Po"; else rm -f ".deps/istream-file.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT istream-limit.o -MD -MP -MF ".deps/istream-limit.Tpo" -c -o istream-limit.o istream-limit.c; then mv -f ".deps/istream-limit.Tpo" ".deps/istream-limit.Po"; else rm -f ".deps/istream-limit.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT istream-mmap.o -MD -MP -MF ".deps/istream-mmap.Tpo" -c -o istream-mmap.o istream-mmap.c; then mv -f ".deps/istream-mmap.Tpo" ".deps/istream-mmap.Po"; else rm -f ".deps/istream-mmap.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT istream-seekable.o -MD -MP -MF ".deps/istream-seekable.Tpo" -c -o istream-seekable.o istream-seekable.c; then mv -f ".deps/istream-seekable.Tpo" ".deps/istream-seekable.Po"; else rm -f ".deps/istream-seekable.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT ioloop.o -MD -MP -MF ".deps/ioloop.Tpo" -c -o ioloop.o ioloop.c; then mv -f ".deps/ioloop.Tpo" ".deps/ioloop.Po"; else rm -f ".deps/ioloop.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT ioloop-iolist.o -MD -MP -MF ".deps/ioloop-iolist.Tpo" -c -o ioloop-iolist.o ioloop-iolist.c; then mv -f ".deps/ioloop-iolist.Tpo" ".deps/ioloop-iolist.Po"; else rm -f ".deps/ioloop-iolist.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT ioloop-notify-none.o -MD -MP -MF ".deps/ioloop-notify-none.Tpo" -c -o ioloop-notify-none.o ioloop-notify-none.c; then mv -f ".deps/ioloop-notify-none.Tpo" ".deps/ioloop-notify-none.Po"; else rm -f ".deps/ioloop-notify-none.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT ioloop-notify-dn.o -MD -MP -MF ".deps/ioloop-notify-dn.Tpo" -c -o ioloop-notify-dn.o ioloop-notify-dn.c; then mv -f ".deps/ioloop-notify-dn.Tpo" ".deps/ioloop-notify-dn.Po"; else rm -f ".deps/ioloop-notify-dn.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT ioloop-notify-inotify.o -MD -MP -MF ".deps/ioloop-notify-inotify.Tpo" -c -o ioloop-notify-inotify.o ioloop-notify-inotify.c; then mv -f ".deps/ioloop-notify-inotify.Tpo" ".deps/ioloop-notify-inotify.Po"; else rm -f ".deps/ioloop-notify-inotify.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT ioloop-notify-kqueue.o -MD -MP -MF ".deps/ioloop-notify-kqueue.Tpo" -c -o ioloop-notify-kqueue.o ioloop-notify-kqueue.c; then mv -f ".deps/ioloop-notify-kqueue.Tpo" ".deps/ioloop-notify-kqueue.Po"; else rm -f ".deps/ioloop-notify-kqueue.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT ioloop-poll.o -MD -MP -MF ".deps/ioloop-poll.Tpo" -c -o ioloop-poll.o ioloop-poll.c; then mv -f ".deps/ioloop-poll.Tpo" ".deps/ioloop-poll.Po"; else rm -f ".deps/ioloop-poll.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT ioloop-select.o -MD -MP -MF ".deps/ioloop-select.Tpo" -c -o ioloop-select.o ioloop-select.c; then mv -f ".deps/ioloop-select.Tpo" ".deps/ioloop-select.Po"; else rm -f ".deps/ioloop-select.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT ioloop-epoll.o -MD -MP -MF ".deps/ioloop-epoll.Tpo" -c -o ioloop-epoll.o ioloop-epoll.c; then mv -f ".deps/ioloop-epoll.Tpo" ".deps/ioloop-epoll.Po"; else rm -f ".deps/ioloop-epoll.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT ioloop-kqueue.o -MD -MP -MF ".deps/ioloop-kqueue.Tpo" -c -o ioloop-kqueue.o ioloop-kqueue.c; then mv -f ".deps/ioloop-kqueue.Tpo" ".deps/ioloop-kqueue.Po"; else rm -f ".deps/ioloop-kqueue.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT lib.o -MD -MP -MF ".deps/lib.Tpo" -c -o lib.o lib.c; then mv -f ".deps/lib.Tpo" ".deps/lib.Po"; else rm -f ".deps/lib.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT lib-signals.o -MD -MP -MF ".deps/lib-signals.Tpo" -c -o lib-signals.o lib-signals.c; then mv -f ".deps/lib-signals.Tpo" ".deps/lib-signals.Po"; else rm -f ".deps/lib-signals.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT md4.o -MD -MP -MF ".deps/md4.Tpo" -c -o md4.o md4.c; then mv -f ".deps/md4.Tpo" ".deps/md4.Po"; else rm -f ".deps/md4.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT md5.o -MD -MP -MF ".deps/md5.Tpo" -c -o md5.o md5.c; then mv -f ".deps/md5.Tpo" ".deps/md5.Po"; else rm -f ".deps/md5.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT mempool.o -MD -MP -MF ".deps/mempool.Tpo" -c -o mempool.o mempool.c; then mv -f ".deps/mempool.Tpo" ".deps/mempool.Po"; else rm -f ".deps/mempool.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT mempool-alloconly.o -MD -MP -MF ".deps/mempool-alloconly.Tpo" -c -o mempool-alloconly.o mempool-alloconly.c; then mv -f ".deps/mempool-alloconly.Tpo" ".deps/mempool-alloconly.Po"; else rm -f ".deps/mempool-alloconly.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT mempool-datastack.o -MD -MP -MF ".deps/mempool-datastack.Tpo" -c -o mempool-datastack.o mempool-datastack.c; then mv -f ".deps/mempool-datastack.Tpo" ".deps/mempool-datastack.Po"; else rm -f ".deps/mempool-datastack.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT mempool-system.o -MD -MP -MF ".deps/mempool-system.Tpo" -c -o mempool-system.o mempool-system.c; then mv -f ".deps/mempool-system.Tpo" ".deps/mempool-system.Po"; else rm -f ".deps/mempool-system.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT mempool-unsafe-datastack.o -MD -MP -MF ".deps/mempool-unsafe-datastack.Tpo" -c -o mempool-unsafe-datastack.o mempool-unsafe-datastack.c; then mv -f ".deps/mempool-unsafe-datastack.Tpo" ".deps/mempool-unsafe-datastack.Po"; else rm -f ".deps/mempool-unsafe-datastack.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT mkdir-parents.o -MD -MP -MF ".deps/mkdir-parents.Tpo" -c -o mkdir-parents.o mkdir-parents.c; then mv -f ".deps/mkdir-parents.Tpo" ".deps/mkdir-parents.Po"; else rm -f ".deps/mkdir-parents.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT mmap-anon.o -MD -MP -MF ".deps/mmap-anon.Tpo" -c -o mmap-anon.o mmap-anon.c; then mv -f ".deps/mmap-anon.Tpo" ".deps/mmap-anon.Po"; else rm -f ".deps/mmap-anon.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT mmap-util.o -MD -MP -MF ".deps/mmap-util.Tpo" -c -o mmap-util.o mmap-util.c; then mv -f ".deps/mmap-util.Tpo" ".deps/mmap-util.Po"; else rm -f ".deps/mmap-util.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT module-dir.o -MD -MP -MF ".deps/module-dir.Tpo" -c -o module-dir.o module-dir.c; then mv -f ".deps/module-dir.Tpo" ".deps/module-dir.Po"; else rm -f ".deps/module-dir.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -MT mountpoint.o -MD -MP -MF ".deps/mountpoint.Tpo" -c -o mountpoint.o mountpoint.c; then mv -f ".deps/mountpoint.Tpo" ".deps/mountpoint.Po"; else rm -f ".deps/mountpoint.Tpo"; exit 1; fi mountpoint.c:11:30: #if with no expression mountpoint.c:40: warning: unused parameter 'path' mountpoint.c:40: warning: unused parameter 'pool' *** Error code 1 Stop in /usr/home/tim/build/dovecot-1.0.rc11/src/lib. *** Error code 1 Stop in /usr/home/tim/build/dovecot-1.0.rc11/src. *** Error code 1 Stop in /usr/home/tim/build/dovecot-1.0.rc11. *** Error code 1 Stop in /usr/home/tim/build/dovecot-1.0.rc11. I don't /think/ I did anything or changed anything from rc10 to rc11 that would cause this. Any assistance would be greatly appreciated. Regards, Tim Wilde

3 3

[Dovecot] Sending email using IMAP
by Marc Perkel 04 Nov '06

04 Nov '06

This is something for after the 1.0 release but I think it's important and I'm going to try to figure out how to make it happen. I'd like to see some way to pass outgoing email from Thunderbird back to dovecot through some new command that we would have to make up. Email would be sent back over the IMAP connection and when Dovecot gets it dovecot would hand it off to an SMTP server that would deliver it. If a crude experimental spec can be written I'll try to find someone on the Thunderbird side to write some sort of module to talk to it. The reason for this is that I think that the elimination of SMTP from the client is a big step to control spam. The idea being that if IMAP can transfer outgoing mail the SMTP wouldn't be necessary for clients and we can block port 25 on windows machines and viruses can't send email. And the virus wouldn't have access to the IMAP password so viruses can't authenticate to send mail. So - the key question is - what would it take to create an outgoing spec for sending email over IMAP? Like to see something clean and simple.

20 36