- dovecot - dovecot.org

[dovecot] About the dovecot package (fwd)
by Jaldhar H. Vyas 07 Feb '03

07 Feb '03

Dear Timo, What do you think of this? Fyi, I've been getting the same thing lately and I'm wondering if gnutls is to blame? (i've had inexlicable SIGSEGVs in other apps before due to it.) Tomorrow I'll try with openssl but I was wondering if you had any other ideas? -- Jaldhar H. Vyas <jaldhar(a)debian.org> La Salle Debain - http://www.braincells.com/debian/ ---------- Forwarded message ---------- From: Guille -bisho- <bisho(a)eurielec.etsit.upm.es> To: jaldhar(a)debian.org Date: Mon, 3 Feb 2003 02:08:19 +0100 Subject: About the dovecot package Hello! First of all thanks for maintain such a good imap server. It's trully fast and lightweight!!! I was trying Courier, but it is not very interoperable with others linux tools like procmail and others, and uw-imapd performance was really bad. I only have one problem: If I put a lot of folders to check in mutt the imapd server closes de connection saying in the logs: Jan 31 02:50:25 www imap-login: Login: bisho Jan 31 02:50:44 www imap-master: child 22234 (imap) killed with signal 11 It only happens when mutt is configured with a lot of folders. Maybe covecot loads too much indexes in memory and reachs some limit, but I have readed carefully the conf file and hadn't found anything related. Do you have any thought about that? Thanks a lot again See you -- .,,, Guillermo Pérez -=] 03/02/2003 [=- _' .,,,, - bisho@ ( onirica.com | eurielec.etsit.upm.es ) (v)/ ,'' ( \/ :: "Nuestras mayores tonterias pueden ser muy sabias." :: bisho! ``\\ :: -- Leonardo Da Vinci ::

2 3

[dovecot] Dovecot on FreeBSD
by Karo Salminen 06 Feb '03

06 Feb '03

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, I built Dovecot (0.99.5) from Ports on FreeBSD 5.0. The mail client (Kmail) cannot login and it complains that authentication process died. The only thing in the logs is: Feb 2 18:13:01 karo imap-login: Disconnected [client-ip] I tried also passwd authentication method, but its symptoms are the very same. My configure can be found at http://people.jyu.fi/~kaeesalm/dovecot.conf I also tried CVS version in hope of fix and more comprehensive debug messages. The compilation failes when it tries to look for passwd.h even though I set - --disable-passwd and --without-passwd to configure parameters. Could someone fix that. - -- Karo Salminen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (FreeBSD) iD8DBQE+PUX0vt6lNXuj7xcRAp70AJ0R+zhmgF+WBaXaX2V2j+07eVyJRACgh6Ze Pmep2Uy2OnVe/EVuo9O3b80= =eqOO -----END PGP SIGNATURE-----

3 10

[dovecot] bincimap
by Farkas Levente 04 Feb '03

04 Feb '03

hi, what do you tyhink about it? especially the faq comment about dovecot? http://www.bincimap.andreas.hanssen.name/ -- Levente "Si vis pacem para bellum!"

3 3

[dovecot] 0.99.8-test1 released
by Timo Sirainen 04 Feb '03

04 Feb '03

I think all of the reported bugs are again fixed in CVS, so I made a tarball of it. I'd like to hear if there's any problems with it. Here's the most important changes: v0.99.8 2003-02-xx Timo Sirainen <tss(a)iki.fi> * NOTE: Configuration file has changed a bit: auth_userinfo was replaced by userdb and passdb. *_port were merged into *_listen. Disabling listening in imaps port is now done by changing protocols setting. + Fully featured POP3 server included. Disabled by default. + Support for LITERAL+, MULTIAPPEND and UNSELECT extensions. + Internal API cleanups made Dovecot faster and take less memory + auth_verbose logs now all authentication failures + Support for Solaris 9 sendfilev() (not really tested) - COPY now behaves as RFC2060 says: "If the COPY command is unsuccessful for any reason, server implementations MUST restore the destination mailbox to its state before the COPY attempt." - maildir_copy_with_hardlinks = yes was broken. - mboxes in subfolders weren't selectable. - STORE didn't accept multiple flags without () around them - PLAIN SASL-authentication was a bit broken. - IMAP dates were parsed a few hours wrong - If auth/login process died unexpectedly at startup, the exit status or killing signal wasn't logged. - mbox parsing might have crashed sometimes - Next command after STARTTLS was ignored which left the connection stuck sometimes - STATUS command removed \Recent flags from messages - Several bugfixes to SEARCH command, especially related to multiple search conditions

1 0

[dovecot] Recent messages
by Jaime Medrano 03 Feb '03

03 Feb '03

Dovecot seems to manage \Recent messages in a weird way. When a STATUS command is performed in a mailbox, then the \Recent flag of its messages disappear and latter STATUS commands report that there are no recent messagges. I don't know exactly the behavior of the RFC. But other imap servers (UW-imapd, Netscape Messenger...) report the same number of recent messages when two STATUS commands are performed together. -- Jaime.

2 1

[dovecot] Plain auth broken
by Timo Sirainen 03 Feb '03

03 Feb '03

On Fri, 2003-01-17 at 14:15, Timo Sirainen wrote: > On Thu, 2003-01-16 at 03:31, james broermann wrote: > > pine still doesn't want to work. It does detect that the server is using > > plain text passwords. I'll try the sniffer and see what turns up. > > Whops, you're right. I've tested pine only with digest-md5 > authentication before. Looks like my PLAIN authentication isn't working > properly. Normally other clients just use LOGIN command which is > different. Patch is now available at http://dovecot.procontrol.fi/

2 7

[dovecot] cvs down?
by Jesse Peterson 24 Jan '03

24 Jan '03

(Logging in to anonymous(a)dovecot.procontrol.fi) CVS password: cvs [login aborted]: connect to dovecot.procontrol.fi:2401 failed: Connection refused cvs [checkout aborted]: connect to dovecot.procontrol.fi:2401 failed: Connection refused Was the CVS server taken down? -- Jesse Peterson / jesse(a)pixeltechs.com

2 1

[dovecot] Unable to Log in on FreeBSD server?
by Mark 21 Jan '03

21 Jan '03

Hello! I recently compiled dovecot 0.99.7 on a FreeBSD 4.3 server, and have been having problems with logging in and password authentication. a. I can't seem to get it to compile MD5 support -- it only seems to support plain, plain-file, and pam. b. Whenever I try to log in, I always get something along the following lines in /var/log/messages .... Jan 16 17:52:15 akira imap-login: close(master) failed: Bad file descriptor Jan 16 17:55:33 akira imap-auth: Userinfo pam doesn't support DIGEST-MD5 method Jan 16 18:08:28 akira imap-master: Login process died too early - shutting down (I also included one about MD5 in there too! :-)) Basically, the imap-login process is dying every time I try to do a login from a remote machine (I've tried Evolution and Outlook Express ....) I've tried telling it to use port 143 and port 993 (where it correctly generates a warning about a certificate that it can't verify, since i created that certificate with mkcert.sh ) Is there something I haven't configured correctly? The only things I've changed in dovecot.conf are: Any suggestions? Thanks, Marc.

2 5

[dovecot] mbox & Maildir
by james broermann 18 Jan '03

18 Jan '03

Hi, Is it possible for a client to read both mbox and Maildir formats from one server running dovecot? Without changing default_mail_env in dovecot.conf, Maildir folders are working ... they're located in ~/Maildir. No /var/mail/username exists. I have mbox format folders in ~/mail and have been trying to get pine to find them by adding pine folder collections. I always end up back in ~/Maildir, though. Thanks, Jim

2 1

[dovecot] 0.99.7 out
by Timo Sirainen 17 Jan '03

17 Jan '03

This one seems to be actually working. Also rewrote doc/index.txt in case someone is interested.

3 7