- dovecot - dovecot.org

[Dovecot] Postgres "issue"
by Maikel Verheijen 27 May '03

27 May '03

Dear list, I have a small issue with dovecot talking to a postgresql server: If my postgres server get restarted, dovecot fails to reconnect to the postgres server. I run dovecot 0.99.9.1 (which is actually a cvs version of dovecot, of may 9 2003) I have the same postgres version for the server as I use for the libraries. Is it hard to get auto-reconnect to work? Kind regards, Maikel Verheijen Ps: the log message I get is this: May 22 17:33:01 testlfw3 dovecot-auth: PGSQL: Query "SELECT password FROM aliases WHERE alias = 'maikel(a)test.com' AND password != ''" failed: FATAL 1: This connection has been terminated by the administrator. server closed the connection unexpectedly ^IThis probably means the server terminated abnormally ^Ibefore or while processing the request. Which probably describes it all :)

1 0

[Dovecot] pop3 timeout when sending first message
by Mike Brown 27 May '03

27 May '03

I'm using FreeBSD 4.8 with dovecot from the ports collection. First I am first trying to fetch mail via POP3. Clients are both OE6 and Mozilla. Both exhibit the same behavior: the client says it is receiving message 1 of (however many), but nothing happens; no message data is transferred. Mozilla seems to keep waiting forever, but OE6 times out after 60 seconds and lets me stop waiting. I tried both with and without SSL. Authentication works fine in either case, but the mail xfer just doesn't work. There's nothing of interest in the logs. By the way, there seems to be no mention of what syslog facility is used by dovecot. What is it? I'm avoiding syslog for now and writing to specific files. In the info log I get this when the client logs in: pop3-login: May 25 23:10:44 Info: Login: mike [my.IP.addr.here] In the other log I get this when OE6 disconnects, following the timeout and prompting me to wait or stop: pop3-login: May 25 23:11:53 Warning: SSL_read() syscall failed: EOF [216.241.45.45] I'm not sure what else to do to try to debug this... Help? -Mike

2 4

[Dovecot] Why dovecot is not multi-threaded?
by Ruben Alvarez 26 May '03

26 May '03

Hi, I'm looking for the most efficient OpenSource IMAP server and I am told that Dovecot Server is a good solution. Anyway, I have inspected the source code and I think Dovecot is not a multi-threaded server, but a forked server. I am surprised about this issue, because threads perfomance should be higher than creating a new process for each connection....I suppose. So, Could anybody tell me why Dovecot was not designed with multi-threaded support?. Perhaps, threads are not a good solution for Dovecot but I am very interested in which are the reasons for this. By the other hand, ¿do anybody know any multi-threaded OpenSource IMAP server?. I would like test performance of Dovecot server versus a multi-threaded one. Very thanks.

2 1

[Dovecot] logging in POP3
by Jens Laas 26 May '03

26 May '03

I have begun testing dovecot as (primarly) a POP replacement. So far the only lacking bit is the logging. It would be great if pop3 could log a line at client exit with the following info: (wishlist follows :) o nr deleted mails + total bytes deletes o nr mails left in spool + bytes left o time spent o indication if TLS was used or not If you would lika generic logging API I have one you can use: (Only tested under Linux. It is GPL) http://robur.slu.se/jensl/jellog.tar.gz Excerpt from headerfile: /* Functions for setting the destination of logger_facilities. - filename is the file to append log entries to. If file does not exist it is created with umask 0666 (modified as usual by open() call). - filestream is the FILE stream to use. - fd is the filedescriptor to use. - priority is the syslog priority to use as used in the syslog() call. - timestamp is used as a boolean. True means begin line with a timestamp. */ int logger_set_file(logger_facility facility, char *filename, int timestamp); int logger_set_iostream(logger_facility facility, FILE *filestream, int timestamp); int logger_set_fd(logger_facility facility, int fd, int timestamp); int logger_set_syslog(logger_facility facility, int priority, int timestamp); /* fmt = [sdt]+ s = string d = integer t = time-string Example: logger( LOGGER_ERROR, "sds", "Errorcode: ", -1234, ". Aborting!"); See end of logger.c for more examples. */ int logger(logger_facility facility, char *fmt, ...); Dovecot looks great! Just thought I'd send you this wishlist. If you could point me to the right places in the code I am willing to help adding this myself. Cheers, Jens Låås ----------------------------------------------------------------------- 'This mail automatically becomes portable when carried.' ----------------------------------------------------------------------- Jens Låås Email: jens.laas(a)data.slu.se Department of Computer Services, SLU Phone: +46 18 67 35 15 Vindbrovägen 1 P.O. Box 7079 S-750 07 Uppsala SWEDEN -----------------------------------------------------------------------

2 1

[Dovecot] possible dovecot problem (fwd)
by Mark E. Mallett 23 May '03

23 May '03

I'm just forwarding this verbatim from somebody who works here. Comments ? mm ----- Forwarded message from Dave Chamberlain <davec(a)mv.mv.com> ----- > Subject: possible dovecot problem > From: "Dave Chamberlain" <davec(a)mv.mv.com> > Date: Tue, 20 May 2003 21:29:48 -0400 (EDT) > To: mem(a)mv.mv.com (Mark E. Mallett) > > Ok, I'm kind of confused at what dovecot's imap implementation is doing. > > I seem to be spending more time than I need to correctly decipher the headers of > email messages. > > I have included here the text from 7.4.2 as it explains the response from a > fetch of an ENVELOPE. The last paragraph specifies that the FROM, SENDER > and REPLYTO fields cannot be nil because some of them must be present per > RFC822 and the IMAP spec will default values. I have many examples where > this is not the case, where the fetch of the envelope is returning NIL for > some of these values. > > In the example below, the message shows that the from, replyto and sender > are all set to jaentc(a)aukware.com (ok, a spelling error, but that was her > typing it in wrong). The next field after those three is NIL, that is the > TO line (more of my text after the IMAP conversation) > > a uid fetch 902 ENVELOPE > * 113 EXISTS > * 1 RECENT > * 104 FETCH (UID 902 ENVELOPE ("Tue, 20 May 2003 16:05:04 -0500" "From A Friend: > 'TheWMURChannel.com - News - Law Raises Age Children Must Be In Seat Restraints'" > (("Janet" NIL "jaentc" "aukware.com")) > (("Janet" NIL "jaentc" "aukware.com")) > (("Janet" NIL "jaentc" "aukware.com")) NIL NIL NIL NIL > "<200305202105.h4KL5xo20860(a)qbert.ibsys.com>")) > > Following is the complete header from the message. There is a valid To address > supplied, and it is in one of the allowed formats. I would have thought that > possibly it was the format that was causing the problem. I first theorized that > it didn't understand the emailaddress (personalname) format. However, the > From field is in that format, and was correctly picked up (notice that "Janet" > exists above as the Personal name, so it did understand that format). > > I have found multple cases where the FROM was NIL, the SUBJECT was NIL and > the TO is NIL, yet when looking at the header they are visible. > > This is causing problems with more than just my things, OE is having a problem > with it as well. > > > > > >From jaentc(a)aukware.com Tue May 20 21:26:43 2003 UTC > Received: (qmail 24772 invoked from network); 20 May 2003 17:52:17 -0400 > Received: from iridium.mv.net (HELO mv.mv.com) (qmailr(a)199.125.85.17) > by mercury.mv.net with SMTP; 20 May 2003 17:52:17 -0400 > X-Peer-Info: remote-ip 199.125.85.17 local-ip 199.125.85.40 > local-name mercury.mv.net > Received: (qmail 21564 invoked by uid 134); 20 May 2003 17:26:53 -0400 > Delivered-To: davec(a)mv.com > Received: (qmail 3533 invoked from network); 20 May 2003 17:06:26 -0400 > Received: from qbert.ibsys.com (66.187.197.24) > by iridium.mv.net with SMTP; 20 May 2003 17:06:26 -0400 > X-Peer-Info: remote-ip 66.187.197.24 local-ip 199.125.85.17 > local-name iridium.mv.net > Received: from 10.0.0.24 (cfusion3.ibsys.com [10.3.0.53]) > by qbert.ibsys.com (Switch-2.1.0/Switch-2.1.0) with ESMTP id h4KL5xo20860 > for <davec(a)mv.com (Dave)> Tue, 20 May 2003 16:05:59 -0500 (CDT) > Message-Id: <200305202105.h4KL5xo20860(a)qbert.ibsys.com> > Content-type: text/plain > Date: Tue, 20 May 2003 16:05:04 -0500 > From: jaentc(a)aukware.com (Janet) > Subject: From A Friend: 'TheWMURChannel.com - News - Law Raises Age Children Must Be > In Seat Restraints' > To: davec(a)mv.com (Dave) > > > Section 7.4.2 > > ENVELOPE > A parenthesized list that describes the envelope structure of a > message. This is computed by the server by parsing the > [RFC-2822] header into the component parts, defaulting various > fields as necessary. > > The fields of the envelope structure are in the following > order: date, subject, from, sender, reply-to, to, cc, bcc, > in-reply-to, and message-id. The date, subject, in-reply-to, > and message-id fields are strings. The from, sender, reply-to, > to, cc, and bcc fields are parenthesized lists of address > structures. > > An address structure is a parenthesized list that describes an > electronic mail address. The fields of an address structure > are in the following order: personal name, [SMTP] > at-domain-list (source route), mailbox name, and host name. > > [RFC-2822] group syntax is indicated by a special form of > address structure in which the host name field is NIL. If the > mailbox name field is also NIL, this is an end of group marker > (semi-colon in RFC 822 syntax). If the mailbox name field is > non-NIL, this is a start of group marker, and the mailbox name > field holds the group name phrase. > > If the Date, Subject, In-Reply-To, and Message-ID header lines > are absent in the [RFC-2822] header, the corresponding member > of the envelope is NIL; if these header lines are present but > empty the corresponding member of the envelope is the empty > string. > > Note: some servers may return a NIL envelope member in the > "present but empty" case. Clients SHOULD treat NIL and > empty string as identical. > > Note: [RFC-2822] requires that all messages have a valid > Date header. Therefore, the date member in the envelope can > not be NIL or the empty string. > > Note: [RFC-2822] requires that the In-Reply-To and > Message-ID headers, if present, have non-empty content. > Therefore, the in-reply-to and message-id members in the > envelope can not be the empty string. > > If the From, To, cc, and bcc header lines are absent in the > [RFC-2822] header, or are present but empty, the corresponding > member of the envelope is NIL. > > If the Sender or Reply-To lines are absent in the [RFC-2822] > header, or are present but empty, the server sets the > corresponding member of the envelope to be the same value as > the from member (the client is not expected to know to do > this). > > Note: [RFC-2822] requires that all messages have a valid > From header. Therefore, the from, sender, and reply-to > members in the envelope can not be NIL. ----- End forwarded message -----

2 7

[Dovecot] Dovecot and SquirrelMail
by Ken Wilson 22 May '03

22 May '03

Hello, Does anyone know how to get dovecot working with squirrelmail v1.4? We have an existing uw-imap setup, with mail stored in ~/mail and inboxes in /var/spool/mail/user. I've tried setting $imap_server_type = other in squirrelmail, but I do not see any mail in my inbox. This is my setting in dovecot.conf default_mail_env = maildir:~/mail/:INBOX=/var/spool/mail/%n Any help would be grealty appreciated, as I want to leave uw-imap and get the speed increases that dovecot offers. Thanks Ken All e-mail from Wilberforce College is governed by our legal disclaimer which is available at http://webmail.wilberforce.ac.uk/disclaimer.txt

3 2

[Dovecot] ssl still not working
by Farkas Levente 21 May '03

21 May '03

hi, I'm just download the latest cvs and try to use imaps. in mozilla I've got the following message window: ----------------------------- mail.int.bppiac.hu received a message with incorrect Message Authentication Code. If the error occurs frequently, contact the website administrator. ----------------------------- and there is only one OK button:-) and this happens always. what can be the reason and what can I do? thanks. -- Levente "Si vis pacem para bellum!"

6 11

[Dovecot] SSL problems
by Timo Sirainen 21 May '03

21 May '03

Anyone with SSL problems, please try 0.99.10-test4 or included patch. If it fixes it, I'll make it faster by caching the generated keys. http://dovecot.procontrol.fi/test/

2 1

[Dovecot] dovecot with ssl on rhl9
by Elliot Peele 20 May '03

20 May '03

Has anyone gotten dovecot to work on Red Hat Linux 9 with ssl support? It seems to work just fine on Red Hat Linux 8.0, but doesn't seem to work Red Hat Linux 9. When I try to use openssl to connect to the server i get: [elliot@localhost elliot]$ openssl s_client -connect rktest.physics.ncsu.edu:993 CONNECTED(00000003) depth=0 /OU=IMAP server/CN=imap.example.com/emailAddress=postmaster@example.com verify error:num=18:self signed certificate verify return:1 depth=0 /OU=IMAP server/CN=imap.example.com/emailAddress=postmaster@example.com verify return:1 20949:error:140943FC:SSL routines:SSL3_READ_BYTES:sslv3 alert bad record mac:s3_pkt.c:1052:SSL alert number 20 20949:error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure:s23_lib.c:226: I'm trying to use evolution 1.3.3 to connect via imaps. Whenever I click on the mail folder it just says 'Scanning folders in "IMAP server imap.example.com" (100%)' and then nothing happens. Anyone have any ideas? Thanks Elliot

1 0

RE: [Dovecot] 0.99.10-test1
by Maikel Verheijen 19 May '03

19 May '03

> > Does this mean you made the .subscriptions nfs-safe already in this > > version? > Well, no, but that's not maildir-specific code :) Ah, ok, My mistake! :) Regards, Maikel.

1 0