- dovecot - dovecot.org

[dovecot] vpopmail auth failure
by Oskar Eyb 07 Mar '03

07 Mar '03

hello! when is try to use IMP with dovecot and vpopmail i receive the following error-msg: dovecot-auth: Mar 06 20:43:24 Info: vpopmail(test@$DOMAIN): unknown user But this user exists! Where i can search for the mistake? Greets, Oskar

2 3

[dovecot] OSX & Authentication
by Scott A.McIntyre 07 Mar '03

07 Mar '03

Hi, Taking a stab at getting OSX Server 10.2.4 running Dovecot -- with a minor tweak of replacing lchown() with chown() in the src/lib/sakfe-mkdir.c, it compiled and installed without any problems. However, oddness in authentication. It works once, but only once. I'm trying to use pam and have the following: auth required pam_securityserver.so auth sufficient pam_unix.so account required pam_unix.so In the dovecot.conf I have (amongst other things): auth_userdb = passwd auth_passdb = pam I start up dovecot and do: Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. * OK dovecot ready. . login scott pass . OK Logged in. . logout * BYE Logging out . OK Logout completed. No problem. However, try it again and: Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. * OK dovecot ready. . login scott pass . NO Authentication failed. . logout * BYE Logging out . OK Logout completed. Perhaps there's a better way to get dovecot playing under osx; I'd tried a number of ways of using pam, but perhaps there's a magic other option I've not got working yet. I do run the password server and my account name is using that as per the Workgroup Manager's settings (as opposed to Basic)... Any thoughts appreciated! Scott

2 2

[dovecot] ldap support
by Farkas Levente 06 Mar '03

06 Mar '03

hi, it seem to me that dovecot support only v2 ldap protocol but openldap2.1 support only v3 (or you can enable v2 in the conf file, but it seems they wouldn't like to support it in the future). will dovecot support v3 ldap protocal? thanks. -- Levente "Si vis pacem para bellum!"

3 4

[dovecot] problem with COPY?
by JP 05 Mar '03

05 Mar '03

hi all, I've been trying to use dovecot (from cvs 03.mar.2003, linux 2.2.20, gcc 2.96, openssl 0.9.7a) as an replacement for uw-imap, and it seems to be doing its job, except for one thing: I have my mua (sylpheed-claws from cvs) set up so that it will sort message into certain(imap) directories. so when I check the mail in the INBOX, new mails will be processed automatically and, for example spamcop related emails are moved to their own 'folder'. imap session below. [STARTTLS and LOGIN stuff not included... no errors whatsoever there.] [18:06:39] IMAP4< 5 OK Logged in. [18:06:39] IMAP4> 6 SELECT INBOX [18:06:40] IMAP4< * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) [18:06:40] IMAP4< * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft \*)] Flags permitted. [18:06:40] IMAP4< * 49 EXISTS [18:06:40] IMAP4< * 3 RECENT [18:06:40] IMAP4< * OK [UNSEEN 47] First unseen. [18:06:40] IMAP4< * OK [UIDVALIDITY 1046109663] UIDs valid [18:06:40] IMAP4< * OK [UIDNEXT 64] Predicted next UID [18:06:40] IMAP4< 6 OK [READ-WRITE] Select completed. [18:06:40] IMAP4> 7 UID SEARCH UID 1:* [18:06:40] IMAP4< * SEARCH 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 49 52 55 56 57 58 61 62 63 [18:06:40] IMAP4< 7 OK Search completed. [18:06:40] IMAP4> 8 STATUS INBOX (MESSAGES RECENT UIDNEXT UIDVALIDITY UNSEEN) [18:06:40] IMAP4< * STATUS "INBOX" (MESSAGES 49 RECENT 3 UIDNEXT 64 UIDVALIDITY 1046109663 UNSEEN 3) [18:06:40] IMAP4< 8 OK Status completed. [18:06:40] IMAP4> 9 UID FETCH 61:63 (UID FLAGS RFC822.SIZE BODY.PEEK[HEADER.FIELDS (Date From To Cc Newsgroups Subject Message-Id References In-Reply-To Content-Type Seen Status X-Status From)]) [18:06:40] IMAP4< * 47 FETCH (UID 61 FLAGS (\Recent) RFC822.SIZE 3111 BODY[HEADER.FIELDS (DATE FROM TO CC NEWSGROUPS SUBJECT MESSAGE-ID REFERENCES IN-REPLY-TO CONTENT-TYPE SEEN STATUS X-STATUS FROM)] {322} [18:06:40] IMAP4< * 48 FETCH (UID 62 FLAGS (\Recent) RFC822.SIZE 3111 BODY[HEADER.FIELDS (DATE FROM TO CC NEWSGROUPS SUBJECT MESSAGE-ID REFERENCES IN-REPLY-TO CONTENT-TYPE SEEN STATUS X-STATUS FROM)] {322} [18:06:40] IMAP4< * 49 FETCH (UID 63 FLAGS (\Recent) RFC822.SIZE 3109 BODY[HEADER.FIELDS (DATE FROM TO CC NEWSGROUPS SUBJECT MESSAGE-ID REFERENCES IN-REPLY-TO CONTENT-TYPE SEEN STATUS X-STATUS FROM)] {322} [18:06:40] IMAP4< 9 OK Fetch completed. [18:06:40] IMAP4> 10 STATUS Spamcop (MESSAGES RECENT UIDNEXT UIDVALIDITY UNSEEN) [18:06:40] IMAP4< * STATUS "Spamcop" (MESSAGES 14 RECENT 0 UIDNEXT 51 UIDVALIDITY 1046109859 UNSEEN 0) [18:06:40] IMAP4< 10 OK Status completed. [18:06:40] IMAP4> 11 UID COPY 61 Spamcop now after this, the conenction goes unresponsive and the following appears in the server log: Mar 4 18:06:42 btp212 imap(jp): file index-save.c: line 61 (write_with_lf): assertion failed:(size > 0 && size <= SSIZE_T_MAX) Mar 4 18:06:42 btp212 dovecot: child 6022 (imap) killed with signal 6 any ideas on what might be causing this? dovecot/mua/some else? regards, JP

2 2

[dovecot] Torture tests
by Ian R. Justman 04 Mar '03

04 Mar '03

Hi, all. I've been so impressed with Dovecot, I'm in the process of moving my mail over to it. In fact, one of my mailboxes got SO huge, it'll likely literally take more than a day to move it all over (in excess of 19,000 mails, about 140 megabytes). So far, the IMAP server shows absolutely no sign of crapping out yet. It should also be noted that I'm moving all this mail out of a Cyrus mailstore into an mbox folder on the same server using Pine. And at work, for my work mail, I recently installed Dovecot 0.99.8, using the POP2 port so I can have test it out while not disturbing my coworkers' ability to retrieve mail. So far, I have yet to see anything bad happen. My IMAP test is taking place under Debian GNU/Linux Woody and my POP3 test under FreeBSD 4.7-STABLE. Though any suggestions in what to keep an eye out for in either case? --Ian.

2 1

[dovecot] pine/dovecot issues
by David E. Storey 04 Mar '03

04 Mar '03

Folks, I'm running into some issues with pine and dovecot. (dovecot is running mbox for now... plan to switch to maildir soon.) At first I thought it was a funky issue with the way I was using pine to access mailboxes. (I use rsh to invoke imap as pre-authenticated so when I switch to maildirs, I don't have to worry about pine being patched to support it.) But after switching over to using authenticated IMAP over port 143, it still had issues. I'm getting messages like: Junk in start of group Not an Address Junk at end of envelope Unknown Message property Thus far, it seems to only occur in pine. (Squirrelmail and evolution appear to be fine) Is it the client? Is it dovecot? is it easily fixable? It feels like some sort of escaping issue or parsing issue or something. I just don't know enough about IMAP to determine exactly what it is. I'm using dovecot v0.99.8, MAIL=mbox:%h/Mail/:INBOX=%h/.mailbox I've just converted off of wu-imap in hopes of someday migrating to maildirs on that box. (anyone know of a good mbox to maildir conversion tool? I used to have on that worked fine, but I've since found a ton that don't work well for me at all. I have about a gig of email to backup and convert) d!

3 4

[dovecot] ldap config
by Stefan Sels 03 Mar '03

03 Mar '03

Hi, how do I setup the config to use an ldap server for authentification ? I tried : auth_userdb = ldap:/usr/local/dovecot/etc/dovecot-ldap.conf auth_userdb = ldap:/usr/local/dovecot/etc/ auth_userdb = usr/local/dovecot/etc/dovecot-ldap.conf however I got an error. What is the correct syntax for the ldap config ? Regards, Stefan Sels

2 1

[dovecot] patch for src/auth/db-ldap.c
by Alex Howansky 01 Mar '03

01 Mar '03

*** src/auth/db-ldap.c.orig Sat Mar 1 00:20:10 2003 --- src/auth/db-ldap.c Sat Mar 1 00:20:31 2003 *************** *** 35,42 **** DEF(SET_STR, pass_attrs), DEF(SET_STR, pass_filter), DEF(SET_STR, default_pass_scheme), ! DEF(SET_STR, user_global_uid), ! DEF(SET_STR, user_global_gid) }; struct ldap_settings default_ldap_settings = { --- 35,42 ---- DEF(SET_STR, pass_attrs), DEF(SET_STR, pass_filter), DEF(SET_STR, default_pass_scheme), ! DEF(SET_INT, user_global_uid), ! DEF(SET_INT, user_global_gid) }; struct ldap_settings default_ldap_settings = { -- Alex Howansky Wankwood Associates http://www.wankwood.com/

1 0

[dovecot] Re: zlib support
by Ian R. Justman 27 Feb '03

27 Feb '03

Timo Sirainen wrote: > Yes, it's been in todo for some time now. mbox support would likely be > read-only, read-write would require recreating the whole .gz file on > updates. Actually, I wouldn't mind seeing something like this so I can compress up my old mail and perhaps store them on CD, for example. I tend to archive mailing list traffic by month (which I store in mbox format), so past months tend to not change much, if at all. :) While not an absolute necessity, it'd be nice to have. --Ian.

1 0

[dovecot] zlib support
by seth vidal 27 Feb '03

27 Feb '03

Hi, Silly idea, Ever considered zlib support so the imap server could read through gzipped mbox files or gzipped maildir entries? -sv

2 1